Icon Series - Anderson`s Masonry Hearth and Home

Icon Series
Woodburning Fireplaces
Icon Series
Woodburning Fireplaces
A Fireplace of Epic Proportions!
Icon 100 has the St. Cloud shelf in natural oak, green
marble, gas logs and AED Series glass doors.
• Only Heatilator could bring you a fireplace
this impressive!
• Choice of three premium sizes with true brick-to-brick
opening widths of 50" for I100, 42" for I80 and
36" for I60.
• Clean face design allows finishing materials to be
applied right up to the edge of the firebox opening for
the appearance of a masonry fireplace.
• Can be installed flush to the floor or on a raised hearth.
• Refractory lining color and texture deliver the most
convincing masonry look available in a factory-built
fireplace today; refractory available in herringbone and a
new traditional brick refractory pattern finished in
multiple earth-toned color shades.
• Factory-installed outside air kits utilize outside air for
combustion for maximum drafting performance.
• Integral square bar steel grate and safety fire screen
enhance true masonry appearance.
• Tested and listed to UL safety standards.
• Heatilator 20-year Buyer Protection Plan.
Certifications/General Considerations
• When selecting a location for your Icon fireplace, it is important to evaluate a number of considerations. Please
consult with your dealer or sales representative to determine the best location for your Icon fireplace.
• The rough framing dimensions shown represent the distance from stud to stud only, and do not take into
consideration the addition of drywall.
• Consult local building codes for local installation and operational guidelines.
• For best results, do not construct the framing until the unit is in place.
• A hearth extension is required.
Venting Specifications
• Use of Heatilator SL1100 Series chimney components required.
Finishing Materials
• When finishing Icon, combustible material may be brought up to the
sides of the fireplace but must never overlap the black area or be
placed below the front standoffs. The black metal may only be covered
with noncombustible material such as marble, tile, stone, etc. AED
glass doors overlap onto the front black face of the Icon fireplace.
Therefore, when installing glass doors, finishing material cannot be
brought to the edge of the firebox. Please see glass door installation
instructions for details. Only noncombustible material may be placed
below the top edge of the front header.
800-927-6841
Icon 60/80 has the Bayfield shelf, gas
logs and DM Series glass doors.
PRODUCT, FRAMING & CLEARANCE DIMENSIONS
This information is for planning purposes only. Please refer to installation instructions when installing this product.
I100
Product Dimensions
I80 and I60
Firebox Depth
I100
25 ½"
I80
23 ½"
I60
23 ½"
A
B
C
I80
42"
50 ½"
34 ½"
I60
36"
44 ½"
28 ⅝"
Framing Dimensions
Fireplace Locations
A
B
C
D
I100
61 ⅝"
30 ⅜"
61"
61"
I80
51 ½"
28 ½"
49 ¾"
49 ¾"
I60
45 ½"
28"
49 ¾"
49 ¾"
Clearance Dimensions
A
W/Outside Air
W/O Outside Air
I100
69 ½"
69 ½"
I80
59"
I60
49 ½"
B
A
B
C
D
E
30 ⅜"
I100
104 ⅞"
52 ½"
24 ⅜"
74 ¼"
61 ⅝"
59"
28 ½"
I80
92 ¾"
46 ⅜"
21 ½"
65 ⅝"
51 ½"
I80
12"
55 ½"
45 ½"
28"
I60
85"
42 ½"
19 ⅜"
60 ⅛"
45 ½"
I60
12"
55 ½"
I100
A
B
20"
68 ⅛"
heatilator.com
Icon Series
Woodburning Fireplaces
MODELS AND OPTIONS
Unit Size
Nomenclature
Framing Width
Viewing Width
Model No.
61 ⅝"
50"
61 ⅝"
50"
I100CT
I100H
51 ½"
42"
42"
I80CT
I80H
36"
36"
I60CT
I60H
51 ½"
45 ½"
45 ½"
Refractory Pattern
Colored Traditional
Herringbone
Options
Fireside Versawood
Gas Logs
Fireside Supreme Oak
Gas Logs
AED Doors
AED100, AED80, AED60
Fireside Realwood
Gas Logs
DP Doors
DP8042/B/S, DP6036/B/S
Campfire Gas Logs
DM Doors
DM100/B/S*, DM8042/B/S,
DM6036/B/S
PLEASE NOTE: AED glass doors overlap onto the front black face of the Icon fireplace. Therefore,
finishing material cannot be brought to the edge of the firebox opening. Please see glass door installation
instructions for details.
Venting
SL1100 Series venting components
See Heatilator MSRP Book
*DM 100/B/S doors contain tinted glass.
AVA I L A B L E
FROM
a brand of Hearth & Home Technologies Inc.
1915 West Saunders Street • Mt. Pleasant, Iowa 52641
800-927-6841 • heatilator.com
The information provided in this literature is for planning
purposes only. Please consult the installation manual for
actual installation.
HTL-1021U-0506