catalog

Transcription

catalog

Your CompactPCI Manufacturer
Mapsuka, founded in 1980, has more 30 years of experience as a professional manufacturer of tooling,
mental stamping and electronic assembly for telecommunications,medical, test equipment and other
industries.
In 1997, Mapsuka began developing its series of CompactPCI(cPCI) components and supplying OEM
front panels and PMC bezels to customers worldwide. In 2000, Mapsuka extended its CompactPCI
product mix to include card rack hardware. Beyond its electro-mechanical endeavors, Mapsuka rolled
out a full line of cPCI enclosures from 1U to 9U in 2003. With vast achievements as a professional
engineering group and a variety of configurations within its product family, Mapsuka has gone further
to provide standardized and custom cPCI platform solutions. Additionally, all of its cPCI products meet
PICMG specification, IEEE 1101.10/.11, Eurocard and EMI shielding requirements.
Located in Taiwan and China, Mapsuka has the strength to provide customers with efficient service
and very competitive pricing. Growing steadily, Mapsuka has been chosen by an increasing number of
industry leaders throughout the world as their CompactPCI manufacturer. Choose Mapsuka as your
CompactPCI partner and gain the flexibility your company needs to maintain a leading edge:
CompactPCI / VME / PMC / AMC / uTCA Compliance
Card Rack Hardware
CompactPCI Chassis and Backplanes
cPCI,VME Front Panel,Ejector Handles and PMC Bezels
Customization
We are pleased to present this latest catalog and look forward to becoming your dependable
source in the near future. Mapsuka values the opportunity of being your service provider!
Contents
CompactPCI Platforms
1U-9U
Customization
Service
Mapsuka will collaborate with you on design flexibility, manufacturability, and cost efficiency. Our
service policy contains:
P5-17
P19-20
CompactPCI Power Control backplanes
P20
CompactPCI Power Supply
Fan Units
P30
Bezels
Gaskets
Shield covers
cPCI/ PXI Front Panels
Filler Panels
VME Front Panels
Device holders
Card Accessories
Sleeve
Collar screws
Extrusions
Handles /Tapped / Insulating strips
AMC Front Panels / MicroTCA Chassis
Inquiry Form
Shorten manufacturing lead-time
Mapsuka's Service including:
Design and Engineering
- Mechanical Engineering and Design
- Product design / OEM and ODM
- Structural analysis and Modeling
- Process analysis and Design
- Integration
- Rapid Prototyping
Front Panels & Filler Panels
Card guides
EMC gaskets
PCB Holders
Ejector handles
Microswitch
P21
P25-29
PMC Bezels
Rapid and accurate prototype
Continuous improvement and quality
P22-24
19" Subracks
Customization capabilities
Variety type and low volume
CompactPCI Backplanes
PICMG 2.0R3.0
PICMG 2.16R1.0
Cost Saving
P31-36
- Tooling and Fixture Engineering and Design
- Tooling and Fixture design build and validation
Manufacturing
P37-38
- Stamping
P39-41
- CNC Cutting
- Laser Cutting
- NC Punching
- NC Bending
- Welding
- Surface Treatment: Chromate, Anodize,
P41-42
P42
P43
P44
Anti-contamination, Zinc plating, Nickel plating
- Coating (Powder coating & Painting)
- Overlays
- Silk-Screen
- Assembly
- Custom Packing
Quality Assurance: ISO9001;2008
02
03
CompactPCI
1U - Horizontal Configuration
19" Modular Chassis
Features
Mapsuka's cPCI chassis were developed to withstand tough conditions and long service life.
Some features include:
EMC integrated system in 19" rack mount
Aluminum enclosure
Tool-built Construction, not NCT, to ensure precision and stability.
Utilization of lightweight, weather resistant aluminum materials that ensure:
a. High resistance to rust/corrosion
b. Reduced unit weight (1/3 lighter than steel chassis)
c. Increased EMI/ EMC protection
cPCI Platforms
Dimension: 1U (H) x 84T (W) x 283mm (D)
4 fans in a pluggable 1U fan unit
2-slot 6U CompactPCI backplane
Front cage: 2-slot, 6U x 160mm
Rear I/O: 2-slot, 6U x 80mm
250 W ATX power supply
Customization is available
Front Cross Rail
Rear Cross Rail
P/N: P-184283
Mechanical Design
Front View
283.00
19
Card Guide
Rear View
Air
Flow
1U
Backplane
Side View
Side Plate
Injector/Ejector Handle
Specifications
Fan Unit
EMC Front Panel
Additional Services Include:
EMC Front Panels with Anti-contaminant
surface treatment of the front side.
EMC Device Holder
Panel For Power Supply
Rear Flange
Guide Cross Rail
Front Flange
Fan Mode
Dimension
Bearing type
40 x 40 x 20 mm
Nominal Voltage
Noise
Backplane
2-slot 6U CompactPCI backplane(PICMG 2.16 or RICMG2.0 or 3.0 compliance)
Power Supply
ATX type
Output voltage
Output power
250 W
Input voltage
100 - 240 VAC
DC 12 V
30 dB
+5V/16A, +12V1/16A, +12V2/16A, -12V/0.8A, +3.3V/16.0A, +5vsb/2.5A
Frequency 50/60HZ
Frequency
47 – 63 Hz
Handle For Subracks
04
www.mapsuka.com.tw
05
1U- Customized Enclosure
Features
EMC integrated system in 19” rack mount
Dimensions: 1U (H) x 84T (W) x 283mm (D)
Aluminum enclosures
Aluminum enclosure
Customized height, width, depth are available
cPCI Platforms
Customized bottom with fasteners to fit devices,
boards, etc.
Front & rear Panels with custom cutout and silk-
screening
250 W ATX or 250 W cPCI power supply
Option: 1 x 3.5"HDD and 1 x slim CD-ROM device holders
Mechanical Design
Mechanical Design
Front View
Side View
Front View
Rear View
Side View
Specifications
Fan Unit
Fan Mode
Dimension
Bearing type
70 x 70 x 15 mm
Nominal Voltage
Noise
Backplane
4-slot 6U CompactPCI backplane(PICMG 2.16 or RICMG2.0 or 3.0 compliance)
Power Supply
ATX type
Output voltage
Power Supply
cPCI type
06
Rear View
283.00
19
Mechanical Design
P/N: P-284283
Air
Flow
2U
cPCI Platforms
Features
Output power
250 W
Input voltage
100 - 240 VAC
Output power
Output voltage
Input voltage
DC 12 V
30 dB
+5V/16A, +12V1/16A, +12V2/16A, -12V/0.8A, +3.3V/16.0A, +5vsb/2.5A
250 W (3U 8HP Pluggable)
Frequency
+5V/25A, 3.3V/18A, +12V/5A, -12V/0.5A
90 - 264 VAC
Frequency
50 – 60 Hz
47 - 63 Hz
www.mapsuka.com.tw
07
3U - Vertical Configuration
Features
Aluminum enclosure
Aluminum enclosure
4/6/8-slot 3U CompactPCI backplane
P/N: P-384283
Side View
Front View
Option: 1 x 3.5"HDD and 1 x slim CD-ROM device holders
Mechanical Design
Rear View
3U
283.00
19"
Specifications
Backplane
Power Supply
ATX type
Power Supply
cPCI type
08
P/N: P-484283-H
Specifications
250 W
Input voltage
100 - 240 VAC
Output voltage
Output power
Output voltage
Input voltage
Fan Unit
+5V/16A, +12V1/16A, +12V2/16A, -12V/0.8A, +3.3V/16.0A, +5vsb/2.5A
Frequency
+5V/25 A, +3.3V/18 A, +12V/5A, -12V/0.5 A
90 - 264 VAC
Frequency
50 – 60 Hz
47 - 63 Hz
283.00
Fan Mode
Dimension
Bearing type
70 x 70 x 15 mm
Backplane
Power Supply
ATX type
Output voltage
Power Supply
cPCI type
Rear View
Air
Flow
19"
4/6/8-slot 6U CompactPCI backplane(PICMG 2.16 or RICMG2.0R3.0 compliance)
Output power
Side View
Front View
4U
Air Flow
Output power
400 W
Input voltage
100 - 240 VAC
Output power
Output voltage
Input voltage
O
1 x 5.25" and 1 x 3.5"device holders
Mechanical Design
cPCI Platforms
cPCI Platforms
Features
Nominal Voltage
Noise
DC 12 V
30 dB
+5V/18A, +12V/18A, +12V2/18A, -12V/0.8A, +3.3A/18A, +5vsb/2.5A
Frequency
+5V/25A, 3.3V/18A, +12V/5A, -12V/0.5A
90 - 264 VAC
Frequency
50 – 60 Hz
47 - 63 Hz
www.mapsuka.com.tw
09
4U - Vertical Configuration,Type 1
4U - Vertical Configuration,Type 2
Features
Aluminum enclosure
Aluminum enclosure
3 fans in a pluggable 1 U fan unit
1 fan in a pluggable 1U fan unit
8 -slot 3U CompactPCI backplane
250 W cPCI power supply
250 W ATX power supply
1 x 5.25" and 1 x 3.5"device holders
P/N: P-484283-V1
Side View
Front View
Mechanical Design
Rear View
Air Flow
1 x 5.25" and 1 x 3.5" device holders
Fan Unit
Backplane
Power Supply
ATX type
Power Supply
cPCI type
10
Side View
Front View
283.00
19"
Specifications
P/N: P-484283-V2
Rear View
Air Flow
4U
4U
Mechanical Design
cPCI Platforms
cPCI Platforms
Features
Fan Mode
Dimension
Bearing type
120 x 120 x 25 mm
Output power
250 W
Input voltage
100 - 240 VAC
Output voltage
Output power
Output voltage
Input voltage
Nominal Voltage
Noise
DC 12 V
39 dB
+5V/16A, +12V1/16A, +12V2/16A, -12V/0.8A, +3.3V/16.0A, +5vsb/2.5A
250 W (3U 8HP pluggable)
Frequency
+5V/25A, 3.3V/18A, +12V/5A, -12V/0.5A
90 - 264 VAC
283.00
19"
Frequency
50 – 60 Hz
Specifications
Fan Unit
Fan Mode
Dimension
Bearing type
120 x 120 x 25 mm
Backplane
Power Supply
ATX type
Output voltage
Output power
Input voltage
100 - 240 VAC
Nominal Voltage
Noise
DC 12 V
39 dB
+5V/16A, +12V1/16A, +12V2/16A, -12V/0.8A, +3.3V/16.0A, +5vsb/2.5A
Frequency
50 – 60 Hz
47 - 63 Hz
www.mapsuka.com.tw
11
4U PXI Configuration
Features
Dimension: 4U(0.5U+3U+0.5U) (H) x 84T (W) x 283mm (D)
Aluminum enclosure
Aluminum enclosure
4 fans in a 16HP fan unit with Fan management
8 -slot 3U PXI R2.1 backplane
250W ATX or 250W cPCI power supply
250W cPCI power supply
1 x 5.25"and 1 x 3.5" device holders
Mechanical Design
Front View
Side View
Rear View
P/N: P-584283
Front View
Side View
Air
Flow
Rear View
5U
Mechanical Design
cPCI Platforms
cPCI Platforms
Features
19"
Specifications
Fan Unit
Backplane
Power Supply
ATX type
Power Supply
cPCI type
12
Fan Mode
Dimension
Bearing type
120 x 120 x 25 mm
Output power
250 W
Input voltage
100 - 240 VAC
Output voltage
Output power
Output voltage
Input voltage
Nominal Voltage
Noise
DC 12 V
39 dB
+5V/16A, +12V1/16A, +12V2/16A, -12V/0.8A, +3.3V/16.0A, +5vsb/2.5A
Frequency
+5V/25A, 3.3V/18A, +12V/5A, -12V/0.5A
90 - 264 VAC
Frequency
Specifications
Fan Unit
Dimension
Bearing type
120 x 120 x 25 mm
Backplane
Power Supply
ATX type
Output voltage
50 – 60 Hz
Power Supply
cPCI type
47 - 63 Hz
Fan Mode
283.00
Output power
400 W
Input voltage
100 - 240 VAC
Output power
Output voltage
Input voltage
Nominal Voltage
Noise
DC 12 V
39 dB
+5V/18A, +12V/18A, +12V2/18A, -12V/0.8A, +3.3A/18A, +5vsb/2.5A
Frequency
+5V/25A, 3.3V/18A, +12V/5A, -12V/0.5A
90 - 264 VAC
Frequency
50 – 60 Hz
47 - 63 Hz
www.mapsuka.com.tw
13
Features
Aluminum enclosure
Aluminum enclosure
400 W ATX or 250 W / 400 W / 500 W cPCI power supply
Rear I/O: 8-slot, 6U x 80 mm
1 x 5.25"and 1.35"device holders
400 W ATX or 250 W / 400 W / 500 W cPCI power supply
Mechanical Design
cPCI Platforms
P/N: P-684283
Front View
Side View
Mechanical Design
Rear View
Air Flow
1 x 5.25"and 1.35"device holders
P/N: P-784283
Side View
Front View
Rear View
Air Flow
7U
6U
cPCI Platforms
Features
19"
283.00
19"
Specifications
Backplane
Power Supply
ATX type
Power Supply
cPCI type
Power Supply
cPCI type
14
Specifications
Output power
Output voltage
Input voltage
Output power
Output voltage
Input voltage
Output power
Output voltage
Input voltage
Fan Unit
400 W
Fan Mode
Dimension
Bearing type
120 x 120 x 25 mm
+5V/18A, +12V/18A, +12V2/18A, -12V/0.8A, +3.3A/18A, +5vsb/2.5A
Backplane
Power Supply
ATX type
Output voltage
100 - 240 VAC
Frequency
+5V/25A, 3.3V/18A, +12V/5A, -12V/0.5A
90 - 264 VAC
Frequency
50 – 60 Hz
47 - 63 Hz
+5V/40A, +3.3V/20A, +12V/10A, -12V/3A
90 - 264 VAC
Frequency
47 - 63 Hz
Power Supply
cPCI type
Output power
400 W
Input voltage
100 - 240 VAC
Output power
Output voltage
Input voltage
Nominal Voltage
Noise
DC 12 V
39 dB
+5V/18A, +12V/18A, +12V2/18A, -12V/0.8A, +3.3A/18A, +5vsb/2.5A
Frequency
+5V/25A, 3.3V/18A, +12V/5A, -12V/0.5A
90 - 264 VAC
Frequency
50 – 60 Hz
47 - 63 Hz
www.mapsuka.com.tw
15
Features
Aluminum enclosure
Features
1 x 5.25"and 2 x 3.5"device holders
1 x 5.25"and 2 x 3.5"device holders
Mechanical Design
P/N: P-884283
Side View
Rear View
Air
Flow
Front View
Side View
19"
283.00
Fan Unit
Backplane
Power Supply
ATX type
Power Supply
cPCI type
16
Fan Mode
Dimension
Bearing type
120 x 120 x 25 mm
Output power
400 W
Input voltage
100 - 240 VAC
Output voltage
Output power
Output voltage
Input voltage
Rear View
Air
Flow
9U
8U
Front View
P/N: P-984283
Mechanical Design
19"
Specifications
cPCI Platforms
cPCI Platforms
Aluminum enclosure
Nominal Voltage
Noise
DC 12 V
40 dB
+5V/18A, +12V/18A, +12V2/18A, -12V/0.8A, +3.3A/18A, +5vsb/2.5A
Frequency
+5V/40A, +3.3V/20A, +12V/10A, -12V/3A
90 - 264 VAC
Frequency
Specifications
Fan Unit
Dimension
Bearing type
120 x 120 x 25 mm
Backplane
Power Supply
ATX type
Output voltage
50 – 60 Hz
Power Supply
cPCI type
47 - 63 Hz
Fan Mode
Output power
400 W
Input voltage
100 - 240 VAC
Output power
Output voltage
Input voltage
Nominal Voltage
Noise
DC 12 V
35 dB
+5V/18A, +12V/18A, +12V2/18A, -12V/0.8A, +3.3A/18A, +5vsb/2.5A
Frequency
+5V/40A, +3.3V/20A, +12V/10A, -12V/3A
90 - 264 VAC
Frequency
50 – 60 Hz
47 - 63 Hz
www.mapsuka.com.tw
17
Customized ODM / OEM Services
Struggling with 21st Century ODM/OEM Challenges?
Backplanes
PICMG 2.0R3.0
Features
Conforms to PICMG2.0 R3.0
Supports Hot Swap feature of PICMG 2.1 R2.0
Conforms to PICMG 2.9 R1.0
VI/O are user selectable to a +5V or +3.3V
All signal line characteristic impedance are set to 65Ω
FR4 material PCB
2 m/m HM connector
Specifications
U
MHz
Bit
6
33/66
32/64
3
4
3
6
3
3
Mapsuka has committed three decades in building its ODM/OEM service and support to meet the
demands of today's global economy. Mapsuka's Research Development and Design Team has enabled
it to enjoy flexibility in customization of its platforms that target customer success. In addition to its
design and development strengths, Mapsuka has built a comprehensive list of CompactPCI accessories
and various platform configurations to virtually eliminate production burdens and efficiently meet
accelerated lead times.
Slots
3
6
6
6
6
8
8
2
4
4
8
33/66
33/66
33/66
33/66
33/66
33/66
33/66
33/66
System
P/N
Left
PHT00-20030-06
32
Right
32
Right
32/64
32
32/64
32
32/64
32/64
Left
Left
Bottom
Bottom
Bottom
Left
CPCI20-34VRR-32-A1
CPCI20R30-3U6SVR_32-A1
PHT00-20030-08
CPCI20-38VLR-32-A1
CPCI-62HBL-A1
CPCI20-64HBR_32-A1
CPCI20-64HLB-A1
CPCI20-68VLR-A1
Fill in our "Inquiry Form" on p.44 and send back to Mapsuka to realize your full production potential!
You'll be surprised how immediate a full custom design can be realized!
18
www.mapsuka.com.tw
19
PICMG 2.16R1.0
Features
Conforms to PICMG 2.16 R1.0
Supports Hot Swap feature of PICMG 2.1 R2.0
CompactPCI Packet Switching Backplane (CompactPCI/PSB)
Dual PSB Topology
Physical interface at rates of 10, 100, or 1000 Mb/s on a slot-by-slot basis
Supports full-duplex bit rates of up to 2000 Mb/s per slot
VI/O are user selectable to a +5V or +3.3V
All signal lines characteristic impedance are set to 65Ω
Specifications
CompactPCI Power Supply
Power Supply
Backplanes
Leverage IEEE 802.3-2000 1000BASE-T, providing physical and data link layers
Specifications
Model No
Output Power
Density
Input
Size
CPCI216R10U6S2-A1
CP-HAC250
250 watt
4.6
90-264VAC
3UX8HPX160mm
CPCI216U6S4HR-A2
CP-HAC300S
300 watt
5.7
90-264VAC
3UX8HPX160mm
CP-HAC301
300 watt
5.7
90-264VAC
3UX8HPX160mm
CP-HAC400
400 watt
3.9
90-264VAC
6UX8HPX160mm
CP-HAC500
500 watt
5.0
90-264VAC
6UX8HPX160mm
CP-HDC250
250 watt
4.58
18-36VDC 36-72VDC
3UX8HPX160mm
CP-HDC301
300 watt
7.7
36-72VDC
3UX8HPX160mm
power interface
CP-HDC350
382 watt
3.45
18-36VDC
6UX8HPX160mm
Supports 3U&6U CPCI Power module
CP-HDC400
400 watt
4.01
36-72VDC
6UX8HPX160mm
Supports ATX power connector 3.
CP-HDC500
500 watt
4.5
36-72VDC
6UX8HPX160mm
U
Slots
MHz
Bit
System
P/N
6
4
33/66
32/64
Bottom
CPCI216R10U6S4HL-A2
6
2
6
4
6
8
6
8
33/66
32/64
33/36
Left
32/64
33/66
Bottom
32/64
33/66
Left
32/64
CPCI216U6S8VL-A2
Bottom
CPCI216U6S8HL-A2
CompactPCI Power Backplanes
Features
Conforms to PICMG 2.11 CompactPCI Specification 47-pin
Supports 47-pin power connectors
Current sharing on +5V, +3.3V, +12V and -12V
Specifications
U
3
3
3
20
Power Module
Sockets
ATX
Connectors
For 3U8HP
cPCI PSU
For 6U8HP
cPCI PSU
P/N
2
2
V
--
TLIM-CPCIPWR-3U4S-A1
1
3
1
2
V
V
--
--
www.mapsuka.com.tw
21
Fan Units for Vertical Ventilation
1U Fan Unit With Subrack Assembly
Features
Features
Fan dimension: 120 mm x 120mm x 25mm
Hot-swappable fan unit
Use when stacking multiple rack mount chassis for adding cooling
Rapid assembly
Low noise level
Use in 19" rack
Fan fail indication via LED
Aluminum case and chromate panels
Specifications
P/N
FU-1841
Input power supply DC 12V
Aluminum frame and chromate surface
Height
Width
1U
FU-1842
FU-2843
2U
FU-2846
2U
84HP
15
280mm
8
2
8
15
1U
Width
84HP
84HP
Depth
156mm
280mm
Fan numbers
3
6
3
6
Mechanical Design
Mechanical Design
15
1U
FU-1846SU
6
156mm
Height
FU-1843SU
3
280mm
84HP
P/N
2
156mm
84HP
Specifications
1
156mm
84HP
1U
Fan numbers
156mm
58HP
1U
FU-1846
Depth
32HP
1U
FU-1843
Fan Units
8
15
28
1
41
0
32
32
32
84
58
P/N: FU-1841
P/N: FU-1842
P/N: FU-1843
8
2
28
15
41
2
28
41
0
43.1(1U)
HP
43.1(1U)
43.1(1U)
32
HP
HP
P/N: FU-1843SU
41
0
0
P/N: FU-1846SU
32
32
32
HP
84
P/N: FU-2843
87.1(2U)
P/N: FU-1846
22
84
HP
HP
87.1(2U)
84
43.1(1U)
Fan Units
Low noise level
P/N: FU-2846
www.mapsuka.com.tw
23
1U Vertical Fan Unit With Guide Frame for
Mounting in 84HP Subracks.
Features
Fan Units
1U panel ,3 fans
Use in 84HP subrack
Low noise level.
Input power supply DC 12V
Aluminum frame and chromate surface
Dimensions: 1U (H) x 84HP (W) x 156 mm (D)
Specifications
P/N
FU-1843GF
Height
1U
Width
84HP
Depth
Fan numbers
156mm
3
Mechanical Design
84T Subracks-Vertical
P/N: FU-1843GF
24
www.mapsuka.com.tw
25
Description
U
T
D
Version
Accessories
Subrack Configurations
Specifications
Consist of
Description
Configuration
Front Cross
Rail
A
3
84
185
S-384185
2A+2B+2E+2F+4G
+2H+2I+2K
3
84
285
S-384285
4A+2B+2D+2E+2F
+6G+2H+2I+2K
Rear Cross
Rail
B
Center Cross
Rail
C
4
84
185
3+1
S-484185
2A+6B+2E+2F+8G
+2H+2I+2K
4
84
285
3+1
S-484285
4A+6B+2D+2E+2F
+10G+2H+2I+2K
Guide Cross
Rail
D
6
84
185
S-684185
2A+2B+1C+2E+2F
+6G+2H+2K+2K
Front
Flange
E
6
84
285
S-684285
4A+2B+1C+2D+2E
+2F+8G+2H+2I+2K
Rear Flange
F
7
84
185
6+1
S-784185
2A+6B+1C+2E+2F
+10G+2H+2I+2K
Tapped
Strip
G
7
84
285
6+1
S-784285
4A+6B+1C+2D+2E
+2F+12G+2H+2I+2K
Insulating
Strip
H
9
84
185
S-984185
2A+2B+2C+2E+2F
+8G+2H+2I+2K
Side Plate
I
9
84
285
S-984285
4A+2B+2C+2D+2E
+2F+10G+2H+2I+2K
EMC
Spring
J
Top/Button
cover
K
26
U
3
3
6
6
9
9
HP
84
84
84
84
84
84
D
185
285
185
285
185
285
Part No.
S-384185
S-384285
S-684185
S-684285
S-984185
S-384285
S-684285
Subracks
Subracks
Part No.
S-984285
S-984285
Mechanical Design
3U
6U
9U
www.mapsuka.com.tw
27
Subrack Continued
Specifications
U
4
7
7
84
84
84
84
D
185
285
185
285
For card and double card in 6U/9U subrack
Part No.
S-484185
Specifications
S-484285
U
S-784185
S-784285
S-484285
S-784285
6
6
9
Mechanical Design
9
HP
84
84
84
84
U1
(3)
(3)
(6)
(6)
U2
(3)
(3)
(3)
(3)
HP1
(60)
(40)
(60)
(64)
HP2
(20)
(40)
(20)
(16)
D
285
285
285
285
Subracks
Subracks
4
HP
Rack Mounting Kits
Part No.
MK-684285A
MK-684285B
MK-984285A
MK-984285B
Mechanical Design
4U
7U
28
www.mapsuka.com.tw
29
PMC Bezels
EMC Front panels(FP)
Material:2.5mm aluminum extrusion
Finish:Alochrom
PMC Bezels
Material: Aluminum,Chem Film Class MIL-C-5541 Class 1A
Front Panels
PMC Bezels
Custom cutouts, silkscreen/Pad Printing or full-coverage
Includes:Panel,ejector handles,EMC gaskets,
collars with captive screw
paint available
Specifications
Dimension(mm)
71.5x12.9x12
Part NO.
Packs of
M-O01(blank)
50
Part NO.
Packs of
Gaskets
Material: Stainless steel
Specifications
Material
stainless steel
M-O02-S
50
Specifications
U
PMC shield covers
3
Material: Stainless steel
Specifications
Dimension(mm)
71.5x12.9x12
30
Part NO.
M-O03
Packs of
100
6
9
HP
4
5
6
8
12
4
5
6
8
12
4
5
6
8
12
a
20
----20
----20
-----
b
-25.1
30.1
40.3
60.6
-25.1
30.1
40.3
60.6
-25.1
30.1
40.3
60.6
c
25.4
45.7
25.4
45.7
25.4
45.7
Part No.
FP-304A
FP-305A
FP-306A
FP-308A
FP-312A
FP-604A
FP-605A
FP-606A
FP-608A
FP-612A
FP-904A
FP-905A
FP-906A
FP-908A
FP-912A
www.mapsuka.com.tw
31
EMC Front panels
with cutout (FPC)
EMC Front panels
with micro switch(FPM)
Custom cutouts and silkscreen available within 2 Weeks
Front Panels
Front Panels
Part No.
M-M01
M-M02
Micro-Switch
For retro-Mounting in the ejector handles.
For " live insertion " applications
Part No.
M-N01
M-N02
PCB Holder
For securing the PCB,
Only required for 3U front Panel
Specifications
U
3
6
9
32
HP
4
5
6
8
12
4
5
6
8
12
4
5
6
8
12
a
20
----20
----20
-----
b
-25.1
30.1
40.3
60.6
-25.1
30.1
40.3
60.6
-25.1
30.1
40.3
60.6
c
25.4
45.7
25.4
45.7
25.4
45.7
Part No.
FP-304AC
FP-305AC
FP-306AC
FP-308AC
FP-312AC
FP-604AC
FP-605AC
FP-606AC
FP-608AC
FP-612AC
FP-904AC
FP-905AC
FP-906AC
FP-908AC
FP-912AC
Specifications
U
3
6
9
HP
4
5
6
8
12
4
5
6
8
12
4
5
6
8
12
a
20
----20
----
-20
-----
b
-25.1
30.1
40.3
60.6
-25.1
30.1
40.3
60.6
-25.1
30.1
40.3
60.6
c
25.4
45.7
25.4
45.7
25.4
45.7
Part No.
FP-304-AHS
FP-305-AHS
FP-306-AHS
FP-308-AHS
FP-312-AHS
FP-604-AHS
FP-605-AHS
FP-606-AHS
FP-608-AHS
FP-612-AHS
FP-904-AHS
FP-905-AHS
FP-906-AHS
FP-908-AHS
FP-912-AHS
www.mapsuka.com.tw
33
U-Shaped EMC Front Filler
panel (FFP)
Flat front panels (FHP)
Finish:Chromate Conversion Coated
Front Panels
Front Panels
Material: flat front panel, 2.5mm aluminum or
aluminum extrusion
Inclusion:Panel,EMC gaskets,collars with captive screw
Finish: Alochrom or anodized; or front anodized,
rear conductive, or painted
Includes: handles, PCB holders, collars with
captive screws
U
HP
H(m/m)
2
10.1
4
20
5
25.1
6
30.1
H(m/m)
8
40.3
3
12
60.6
128.7
16
81.2
6
262.05
20
101.24
9
395.4
24
121.56
U
32
162.2
H(m/m)
HP
H(m/m)
3
128.7
2
10.1
6
4
20
262.05
5
25.1
9
395.4
6
30.1
8
40.3
12
60.6
16
81.2
20
101.24
24
121.56
32
162.2
Mechanical Design
Specifications
U
3
4
34
HP
Part No.
4
5
6
8
12
16
20
24
32
4
5
6
8
12
20
24
32
FFP-304
FFP-305
FFP-306
FFP-308
FFP-312
FFP-316
FFP-320
FFP-324
FFP-332
FFP-404
FFP-405
FFP-406
FFP-408
FFP-412
FFP-420
FFP-424
FFP-432
2
FFP-302
Specifications
U
6
9
HP
Part No.
4
5
6
8
12
16
20
24
32
4
5
6
8
12
20
24
32
FFP-604
FFP-605
FFP-606
FFP-608
FFP-612
FFP-616
FFP-620
FFP-624
FFP-632
FFP-904
FFP-905
FFP-906
FFP-908
FFP-912
FFP-920
FFP-924
FFP-932
2
FFP-602
www.mapsuka.com.tw
35
VME Front panels (VFP)
EMC Device holders
Material: 2.5mm aluminum extrusion
Finish: Alochrom or anodized; or front anodized,
rear conductive, or painted
Specifications
Description
Blank VME front panels
VME front panel with
custom cutout
U
3
6
3
6
HP
4
4
4
4
Inclusion:Panel,drive plate,EMC gaskets,
collars with captive screw.
Part No.
VFP-304A
VFP-604A
VFP-304A-C
VFP-604A-C
Specifications
Specifications
Description
VME Bottom ejector handle
VME top ejector handle
Device Holders
Filler Panels
Includes: VME ejector handles, EMC gaskets,
PCB holders, collars with captive screws
Custom cutout and silk-screening available within 2 weeks
Part No.
V-EHA
V-EHB
EMC front panels with Anti-contaminant surface treatment
Specifications
Description
PCB holders for VME front panels
U
HP
Number of device
Depth of device
Part No.
4
12
1x5.25"
137mm
DH-412
4
Part No.
M-N04
6
6
6
8
8
12
32
1x3.5"
2x3.5"
1x5.25"
4x5.25"
137mm
137mm
137mm
137mm
DH-408
DH-608
DH-612
DH-632
Mechanical Design
of the front side
Mechanical Design
36
www.mapsuka.com.tw
37
Card Guide A (160mm)
Card Guide C (220mm or Custom length)
Card thickness 2.0mm
EMC Device holders
Dimension(mm)
160mm
Packs of
50
Card Guide A (160mm)
Colors: Black, gray, red, yellow, green
Inclusion:Panel,drive plate,EMC gaskets,
collars with captive screw.
Dimension(mm)
220mm
Custom length: xxx (mm)
U
HP
Number of device
Depth of device
Part No.
137mm
DH-632C
3
32
2x5.25"
137mm
6
32
1x3.25" and 1x5.25"
137mm
3
32
1x3.25" and 1x5.25"
Mechanical Design
DH-632B
Dimension(mm)
160mm
DH-632D
Color
Black
Gray
Red
Yellow
Green
Part No.
M-CGA160
M-CGA160-G
M-CGA160-RE
M-CGA160-Y
M-CGA160-GN
Card Guide B (80mm)-Left
(160mm, 220mm or Custom length)
Dimension(mm)
80mm
Part No.
M-CGB80L
Packs of
50
Card Guide B (80mm)-Right
38
Part No.
M-CGB-80R
Packs of
50
Packs of
50
50
50
160mm card guides for cPCI PSU installation.
Custom length of aluminum extrusion is available.
Part No.
M-CGE160
M-CGExxx
Packs of
50
50
Part No.
M-J03
M-J06
Packs of
10
10
Part No.
M-N01
Packs of
50
EMC Spring
Dimension(U)
3
6
PCB Holder
Material: ABS
Finish:Chrome Plated
Dimension(mm)
15x9.1x9.7
Dimension(mm)
80mm
Part No.
M-CGD160
M-CGD220
M-CGDxxx
Card Guide
for cPCI power supplies
Dimension(mm)
160mm
Packs of
50
50
Card Guide D
Dimension(mm)
160mm
220mm
Specifications
Part No.
M-CGA220
M-CGAxxx
Card Accessories
Device Holders
Part No.
M-CGA160
12.8x7.4x8.6
11x10.1x8.6
12x9x6.5
M-N02
M-N03
M-N04
50
50
50
www.mapsuka.com.tw
39
Metal teeth
caused by repeated ejections/injections.
M-101-5
Material: 1) Die-Cast block . 2) PBT handle
Finish:Nickel plated for block
Dimension
without micro switch
with microswitch
Part No.
M-EHA2
M-EHAHS2
Packs of
10
10
Packs of
10
10
Packs of
10
10
TOP Ejector Handle(B)
Microswitch
Wire length(mm)
25.4
50.8
Part No.
M-EHB
M-EHBHS
Steel, nickel-plated
Dimension(mm)
Part No.
M2.5 x 12.3mm
M-471
Dimension(T)
Part No.
42
63
84
M-A42
M-A63
M-A84
M-A40
Rear Cross Rail-Type A
Material: Aluminum extrusion
Dimension(T)
Part No.
42
63
84
M-B42A
M-B63A
M-B84A
M-B40A
Rear Cross Rail-Type B
Dimension(T)
Part No.
42
63
84
M-B42B
M-B63B
M-B84B
40
M-B40B
Rear Cross Rail-Type C
Dimension
with microswitch
Collar Screw
40
Bottom Ejector Handle(A)
Part No.
M-EHA
M-EHAHS
M-102-2
M-103-5
M-101-1
Packs of
10
10
Dimension(T)
Part No.
42
63
84
M-B42C
M-B63C
M-B84C
40
M-B40C
Center Cross Rail
Part No.
M-M01
M-M02
Packs of
50
50
Dimension(T)
Part No.
42
63
84
M-C42
M-C63
M-C84
40
M-C40
Extrusions
Card Accessories
Dimension
with microswitch
M2.5 x 2mm
M2.5 x 5mm
40
Part No.
M-EHB2
M-EHBHS2
M-101-2
Part No.
M2.5 x 1mm
caused by repeated ejections/injections.
Dimension
with microswitch
M-101-1
Dimension(mm)
Front Cross Rail
New~Top Ejector Handle(B2)
Patented "Metal Teeth" eliminates damages
40
Metal sleeve, brass, nickel-plated, pressed-in into front panels
New~Bottom Ejector Handle(A2)
Patented "Metal Teeth" eliminates damages
Metal teeth
Sleeve
Finish:Alochrom
Packs of
1
1
1
1
Finish:Alochrom
Packs of
1
1
1
1
Finish:Alochrom
Packs of
1
1
1
1
Finish:Alochrom
Packs of
1
1
1
1
Finish:Alochrom
Packs of
1
1
1
1
www.mapsuka.com.tw
41
Guide Cross Rail
Dimension(T)
40
42
63
84
Part No.
M-D40
M-D42
M-D63
M-D84
Packs of
1
1
1
1
Features
Compact, Mid and Full size in both single and double heights
Front panels, EMC shielded, in two materials: Stainless steel, Aluminum
Fabric over foam gasketing
Customize surface treatment: Anodize/Chromate/Special color Anodize
Custom cutout/silk-screening (single or multicolor)/ painted/ powder coat are available
Front Flange
Part No.
M-E03
M-E04
M-E06
M-E07
M-E09
Finish:Alochrom
Packs of
1
1
1
1
1
Specifications
Rear Flange
Dimension(U)
3
4
6
7
9
Part No.
M-F03
M-F04
M-F06
M-F07
M-F09
Handles for subracks
Dimension(T)
Part No.
136(for 4,6U)
M-L136
110(for 3,5U)
Finish:Alochrom
Packs of
1
1
1
1
1
Finish:Anodize
M-L110
190(for 7,8,9U)
M-L190
Packs of
2
2
2
Material: CRS
Finish:Zinc plated
Custom length available
Part No.
84
AMC Front Panels
Single compact, 3HP
Single midsize, 4HP
Single full size, 6HP
Double compact, 3HP
Double midsize, 4HP
Double full size, 6HP
4HP
6HP
Part no./Stainless
Part no./ Aluminium
AMCS-FP3-S
AMCS-FP3-A
AMCS-FP4-S
AMCS-FP4-A
AMCS-FP6-S
AMCS-FP6-A
AMCD-FP3-S
AMCD-FP3-A
AMCD-FP4-S
AMCD-FP4-A
AMCD-FP6-S
AMCD-FP6-A
MicroTCA Chassis / Platform
Features
Compliant to PICMG MicroTCA Base specification
1 MicroTCA Carrier Hub (MCH) slot (Single Full-size)
6 AMC single Mid-size slots
Dimension: 1U(H) X 19”(W )X 305mm(D)
Tapped Strip
Dimension(T)
3HP
AMC Chassis / Panel
Extrusions/Strips
Dimension(U)
3
4
6
7
9
Finish:Alochrom
AdvancedMC(AMC) front panels
M-G84
Aluminum enclosure
Integrated 350W ATX power supply with wide range input
Packs of
10
4~7 temperature controlled 12 VDC fans (40X40X20mm) for cooling the MicroTCA boards
Mechanical Design
Insulating Strip
Material: PP
Dimension(T)
84
42
Custom length available
Part No.
M-H84
Packs of
10
Front View
Side View
Rear View
www.mapsuka.com.tw
43
MAPSUKA
INQUIRY:
Product:
Standard
Modification of standard product
Custom integrated platform
Dimensions:
H x W x D:
Ux
HP x
mm
Number of slots:
slots
160mm
card depth:
3U
6U
I/O configuration:
None
80mm
CompactPCI backplane:
3U
slots
Vertical type
Horizontal
PICMG version:
32bit
64bit
Standard
Customization:
6U
9U
U
x
mm
Power supply:
ATX type
cPCI plug in
Input voltage:
AC/
Output voltage and currents:
-12V/
V
V
DC/
+3.3V/
V/
V
+5.0V/
V
V
+12V/
V
V
Ventilation:
Fixed fan
Hot-swappable Fan tray
Air entry:
Bottom
Top
Front
Air exit:
Bottom
Top
Front
Fan filter:
Yes
Rear
Rear
Right
Right
Left
Left
No
Device holder:
3.5" x
5.25" x
others:
(number)
(number)
Finish:
Chromate
Painted:
color
other:
Other Requirements
Quantities:
Address:
units
Name
Job title
Company
Department
Web
Email
Fax
Address
Tel

catalog

Transcription

Similar documents

Samsung SGH-E740S service manual

NASA Recipe For Protein Crystallography