Happy D.2 # H2 7696

Leben im Bad
Living bathrooms
Happy D.2
# H2 7696
38
74
B
74
38
100
110
Installation instructions
2000
A
50
50
50
A
mm
B
mm
1200
976
2x 100
4x S8
4x 5,5x50
Instructions for use
The bathroom furniture range complies with the standards and guidelines applicable at the time of delivery and is designed for use in bathrooms.
Direct contact with water should be avoided, for example, when showering.
A power supply of 110 V – 230 V must be available on site.
Distance from the sensor to the reflecting surfaces = > 75 mm.
We reserve the right to make technical improvements and design modifications to the products illustrated.
MAL_Happy D.2_H27696/14.03.1
1
2
3
4
230 V
Ø 8 mm
4x
5
6
7
8
10
11
12
2
1
9
1
2
16x
4x
14
15
16
1
2
3
4
Best.-Nr. H27696/14.03.1
13
Duravit AG, Werderstr. 36, 78132 Hornberg, Germany, Phone +49 78 33 700, Fax +49 78 33 70 289, info@duravit.de, www.duravit.de
MAL_Happy D.2_H27696/14.03.1
Leben im Bad
Living bathrooms
Mirror cabinet with Soundsystem/LED-Dimming function Brief instructions
Index
Caution to Users ...........................3
Statement ..................................... 3
Technical information
Duravit Soundsystem..................... 4
Bluetooth & Enddevices................. 4
Soundquality.................................. 4
Operating Instructions
Consoults and help ....................... 5
Building up a connection
to the soundsystem....................... 6
LED-Dimming function.................. 7
We reserve the right to make technical improvements and enhance the appearance of the products shown.
2
BAL_56878/08.13.1
Customers Product:
Contains FCC ID: 2AA7R465BT01
Contains IC: 11431A-465BT01
Caution to Users
changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment. Statement
(USA)
This evice complies with Part 15 of the FCC rules.Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
(Canada)
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d´Industrie Canada applicables aux appareils radio exempts de licence.
L `exploitation est autorisèe aux deux conditions suivantes:
(1) l´appareil ne doit pas produire de brouillage, et
(2) l´utilisateur de l´appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est
susceptible d´en compromettre le fonctionnement.
BAL_56878/08.13.1
3
DURAVIT SOUNDSYSTEM
Technical specifications
Powerconnection
– 115 V
– Powerconnector only neccesary
in combination with the mirror
lighting.
– We always recommend doing this
through a specialist keeping the
norms of the respective country
in mind.
Power consumption
– Standby < 0,5 Watt
Output performance
– 2 x 5 Watt (Flat Drive Speakers),
– 1 x 25 Watt (Active bass with
passive radiator principle)
Data transmission
– Bluetooth® 2.1 (older versions
also compatible)
Transmission profile
– A2DP (Advanced Audio Distribution
Profile)
Range
– Performance class 2 (up to 10
meters)
Loss of usable space
– 55 mm in the mirror cabinet
Controll
– Independent of the lighting
Acoustictextile
– High acoustic transparency
– 100% Polyester
– Lowest waterabsorption of textile
fibres: 0,4-1,0%
– cleaning with wet cloth
– not flameable
After Sales
– Soundsystem replaceable as one
unit.
4
BAL_56878/08.13.1
Storage
– Max. 8 different devices can be
saved.
– If a ninth device is applied the
device saved first will be deleted
from the storage automatically.
Pairing
– Activation time of the capacitive
switch: 3 – 5 seconds.
– During an over- or underrun of
this time no effect. Because of
that, objects can be placed on top
of the capacitive switch inside the
mirror cabinet.
– After removing the object the capacitive switch takes around 10
seconds to reconfigure itself. After
that it can be used normally for
Pairing-Mode.
User exchange
– Deactivate „Bluetooth ®“ on the
device, that is used at the time.
– Cut the connection from the
device logged in at the time to the
attached device „Duravit Soundsystem“.
– If the logged in device is out of
range for over 3 minutes, the
connection will be deactivated
automaticly. If the user gets back
in range in the time given - his
device will automaticly reconnect
to the soundsystem.
– Depending on witch device is
used, the time until connecting
another device after the log off of
the first device can be up to 60
sec..
Bluetooth & Enddevices
Bluetooth® is a wireless communications technology with a short
range, witch can be used to transfer
data and information over a 10
meter distance wirelessly.
The devices don’t have to be oriented for a Bluetooth® connection.
If devices are in the same user area
they can share information with
each other even if they‘r in different
rooms.
The
device
supports
the
Bluetooth®-Standard 2.1 with the
Profil A2DP but is also compatible
with downgrades. Please check if
your device matches those requirements.
Check the manual of your device to
create a Bluetooth® connection.
Some enddevices especialy those
who have not been testet by,
Bluetooth SIG could be incompatible with the soundsystem.
The available functions and extra
services can be different depending
on hardware, software and network
provider.
Applications and functions can be
different depending on country, area
or hardware specification.
Duravit is not responsible for performance issues caused by applications from third parties.
soundquality
The best soundquality can be
reached if:
– Musictitels are used in an accurate format like MP3, WAV oder
Apple-Format..
– Musictitels are used in the
highest Bitrate.
– The device is used inside the radio range.
consoults and help
Please try the following to solve Problems.
-Probable Cause
u Solution
A new device can’t be connected to the soundsystem ?
- The Bluetooth connection on your device is not activated.
u Activate the Bluetooth® function .
- More than 8 Devices have been logged into the system. Your device has been deleted automaticly from the storage because you logged in to many devices.
u Execute the Pairing process between your device and the soundsystem again. Your device will be saved on the storage again.
- Activating the capacitive switch took less than 3 or longer than 5 seconds.
u Activate the capacitive switch for at least 3 seconds but not for longer than 5 seconds. If the activation process takes longer or shorter than the time given the pairing process can’t be started.
- The capacitive switch got blocked witch an object inside the cabinet.
u Remove the object from the capacitive switch. After 10 seconds the capacitive switch calibrated itself again.
Go on with the pairing process like usually. After that the space inside the cabinet can be be used as always.
- There is an active connection between the soundsystem and another device.
u Cut the active connection between the soundsystem and the logged in device.
Its not enough to get out of reach because the connection wont get lost for another 3 minutes after leaving the radio range.
If the user comes back in that time his device gets connect again automatically to the soundsystem. Only if you stay out of range for
3 minutes or longer the connection will cut automatically and the soundsystem will be free to connect to another device.
- The waiting time between the log off of the first and the log on of the second device was to short.
u Try top connect again after 60 seconds.
the user cant be changed
- The pairing process wasn’t executed with the device yet.
u Execute the pairing process with the device.
- The Bluetooth connection on the device is not activated.
u Activate the Bluetooth function on the device.
- There is an active connection between the soundsystem and another device.
u Cut the active connection between the soundsystem and the logged in device.
Its not enough to get out of reach because the connection wont get lost for another 3 minutes after leaving the radio range.
If the user comes back in that time his device gets connect again automatically to the soundsystem. Only if you stay out of range for
3 minutes or longer the connection will cut automatically and the soundsystem will be free to connect to another device.
- The waiting time between the log off of the first and the log on of the second device was to short.
u Try top connect again after 60 seconds.
BAL_56878/08.13.1
5
BUILDING UP A CONNECTION TO
THE SOUNDSYSTEM
Bluetooth
ON
1
2
As soon as the mirrorcabinet gets
connected to electricity, the soundsystem will be activated.
Activate the Bluetooth®-function on
your device.
8:51 AM
General
Bluetooth
Bluetooth
ON
Deviees
Duravit Soundsystem
5
The Soundsystem will be shown as
„Duravit Soundsystem“ in the Bluetooth® menue on your device. Now
connect your device with the soundsystem. If you‘re asked to type in a
PIN code, please enter 1817.
6
BAL_56878/08.13.1
6
Start the music on your device.
To cut the connection:
– Turn off „Bluetooth®“ on your
device.
– Cut the connection to the atteched
device „Duravit Soundsystem“.
– If you‘re out of range for longer
than 3 minutes the connection will
be cut automaticly.
3
3 sec
Activate the capacitive switch on the
inner right side of the mirror cabinet by touching the marked area for
at least 3 seconds, but maximum 5
seconds.
4
A recognition sound can be heard.
The Pairing-Mode stays active for
ca. 1 minute. In this time you should
build up a connection to the soundsystem. If it takes you longer than
one minute you‘ll have to press the
pairing button again.
LED-Dimming function
LED
LED
1
1-2 sec
100%
2
>3 sec
100%
10%
BAL_56878/08.13.1
7
Duravit NYC
105 Madison Avenue
New York, NY 10016
Phone:+1 212 686 0033
Fax: +1 212 686 8033
info@us.duravit.com
nyc.duravit.com
Best.-Nr. 56878/08.13.1 We reserve the right to make technical improvements and enhance the appearance of the products shown.
Duravit USA, Inc.
2205 Northmont Parkway
Suite 200 - Duluth, GA 30096
Phone +1 770 931 3575
Fax +1 770 931 8454
info@us.duravit.com
www.duravit.us