CT0034 - Steel Crochet Scarf inside.eps

Skill Level: Moderate
Hip Beaded “Granny Square” Scarf
Made with Clover’s Soft Touch Steel Crochet Hooks
Supplies
Clover Steel Crochet Hook No. 0/1.75mm Art No. 1020
3 balls DMC Perle Cotton # 8, 1 Clover Gold Eye Tapestry Needle Art No. 238
Beads, Embroidery Stitching Tool Needle Threader Art # 8810
Beadwork Preparation:
Before crochet can begin the beads must be threaded onto the Perle Cotton. Using the needle
threader scoop the beads onto the threader by gently pushing the threader into the beads. This
gentle motion will force beads onto the threader. Place Perle Cotton in threader and slide beads
onto thread. Repeat this process until your beads are all threaded onto the Perle Cotton.
Granny Square Instruction
Round 1: chain 6 , join to form ring
Round 2: chain 3 (counts as a dc in this and all following rnds), 2 dc in ring; (ch 2, 3 dc in ring)
3 times; ch 2; join in 3rd ch of beg ch-3.
Beadwork begins with rnd 3. Beads are added as follows:
Double crochet – wrap thread around hook, insert hook into stitch, yarn over the hook, draw yarn
through, which leaves 3 stitches on the hook. Slide a bead up close to the three loops,
yarn over the hook, draw yarn through two stitches ( which holds the bead in place),
yarn over the hook, draw yarn through remaining two stitches.
Round 3: slip stitch in each dc to ch-2 sp; ch 3, in same sp work (2 dc, ch2, 3dc):
corner made; * ch 1, sk next 3 dc, in next ch-2 sp work ( 3 dc, ch2, 3dc):
corner made; rep from * twice more; ch 1,
sk next 3 dc; join in 3rd ch of beg ch-3: slip st in each dc to ch-2 sp.
Round 4: ch 3, in same sp work ( 2 dc, ch2, 3 dc): corner made; * ch 1 sk next 3 dc,
3 dc in next ch-1 sp: 3-dc group made; ch 1 sk next 3 dc, in next ch-2
corner work ( 3 dc, ch 2, 3 dc)
corner made; rep from * twice more; ch 1, 3 dc in next ch-1 sp: 3 dc group made;
ch 1, sk next 3 dc; join in 3rd ch of beg ch-3; finish off.
Make 18 squares. Using the tapestry needle sew the squares together.
Using crochet hook work single crochet around joined squares. Block. Add fringe.
Created by: Fran Ortmeyer
Clover Soft Touch Steel Crochet Hooks
Art No's. 1020 No. 0/1.75mm
1021 No. 2/1.50mm
1022 No. 4/1.25mm
1023 No. 6/1.00mm
1024 No. 8/0.90mm
1025 No. 10/0.75mm
1026 No. 12/0.60mm
1027 No. 14/0.50mm
Crochet Abbreviations
* repeat the instructions following the
single asterisk as directed
( ) work instructions within parentheses
as many times as directed
approx - approximately, beg begin/beginning, ch - chain stitch,
ch -, refers to chain or space previously
made: e.g., ch-1 space,
dc - double crochet, rep - repeat(s),
sk - skip, Sl st - slip sitich,
sp(s) - space(s), rnd(s)-rounds
13438 ALONDRA BLVD. CERRITOS, CA 90703
TOLL: (800)233-1703
Fax: (562)282-0220
Website: www.clover-usa.com
CT0034
Hip Beaded
“Granny Square” Scarf
Made with Clover’s Soft Touch
Steel Crochet Hooks
Bead Crocheted
Necklace
(project available online)
FREE
Skill Level: Moderate
Hip Beaded “Granny Square” Scarf
Made with Clover’s Soft Touch Steel Crochet Hooks
Supplies
Clover Steel Crochet Hook No. 0/1.75mm Art No. 1020
3 balls DMC Perle Cotton # 8, 1 Clover Gold Eye Tapestry Needle Art No. 238
Beads, Embroidery Stitching Tool Needle Threader Art # 8810
Beadwork Preparation:
Before crochet can begin the beads must be threaded onto the Perle Cotton. Using the needle
threader scoop the beads onto the threader by gently pushing the threader into the beads. This
gentle motion will force beads onto the threader. Place Perle Cotton in threader and slide beads
onto thread. Repeat this process until your beads are all threaded onto the Perle Cotton.
Granny Square Instruction
Round 1: chain 6 , join to form ring
Round 2: chain 3 (counts as a dc in this and all following rnds), 2 dc in ring; (ch 2, 3 dc in ring)
3 times; ch 2; join in 3rd ch of beg ch-3.
Beadwork begins with rnd 3. Beads are added as follows:
Double crochet – wrap thread around hook, insert hook into stitch, yarn over the hook, draw yarn
through, which leaves 3 stitches on the hook. Slide a bead up close to the three loops,
yarn over the hook, draw yarn through two stitches ( which holds the bead in place),
yarn over the hook, draw yarn through remaining two stitches.
Round 3: slip stitch in each dc to ch-2 sp; ch 3, in same sp work (2 dc, ch2, 3dc):
corner made; * ch 1, sk next 3 dc, in next ch-2 sp work ( 3 dc, ch2, 3dc):
corner made; rep from * twice more; ch 1,
sk next 3 dc; join in 3rd ch of beg ch-3: slip st in each dc to ch-2 sp.
Round 4: ch 3, in same sp work ( 2 dc, ch2, 3 dc): corner made; * ch 1 sk next 3 dc,
3 dc in next ch-1 sp: 3-dc group made; ch 1 sk next 3 dc, in next ch-2
corner work ( 3 dc, ch 2, 3 dc)
corner made; rep from * twice more; ch 1, 3 dc in next ch-1 sp: 3 dc group made;
ch 1, sk next 3 dc; join in 3rd ch of beg ch-3; finish off.
Make 18 squares. Using the tapestry needle sew the squares together.
Using crochet hook work single crochet around joined squares. Block. Add fringe.
Created by: Fran Ortmeyer
Clover Soft Touch Steel Crochet Hooks
Art No's. 1020 No. 0/1.75mm
1021 No. 2/1.50mm
1022 No. 4/1.25mm
1023 No. 6/1.00mm
1024 No. 8/0.90mm
1025 No. 10/0.75mm
1026 No. 12/0.60mm
1027 No. 14/0.50mm
13438 ALONDRA BLVD. CERRITOS, CA 90703
TOLL: (800)233-1703
Fax: (562)282-0220
Website: www.clover-usa.com
Crochet Abbreviations
* repeat the instructions following the
single asterisk as directed
( ) work instructions within parentheses
as many times as directed
approx - approximately, beg begin/beginning, ch - chain stitch,
ch -, refers to chain or space previously
made: e.g., ch-1 space,
dc - double crochet, rep - repeat(s),
sk - skip, Sl st - slip sitich,
sp(s) - space(s), rnd(s)-rounds
CT0034