gennex - Bartels

GENNEX
Performance Series
A2-114-x
l
l
l
l
Wide fork width for direct termination of
an anti torsion rope with thimble
Robust stainless steel construction
Quick locking captive pin
Swivel with anti-chaffing guard
GENNEX
For furling asymmetrical sails (gennakers)
top-down. The sail is furled from the top around
a free-span furling axle. This ensures that large
sails can always be hoisted and dropped safely
- even with a small crew. Furled sails can be
stored quickly and easily.
Screw pin shackle
The halyard can be bent
on directly using a snap
shackle
Halyard swivel Performance
series (Stainless steel with
anti-chaffing guard)
Contrary to top genoas, the luff does not need
to be reinforced because the individual cut
of the sail creates a curved luff. The sail
is furled arround a separate free-span
low torsion rope, starting furling at the
top. This means that a GENNEX system
can also be used to furl existing gennakers.
The furling mechanism will only
work when the low torsion rope is
placed under high tension, which
is why the rope length should
always be measured under
load to prevent the halyard
from touching the roller
box on the mast. The tack
of the sail is bent onto a
separate tack swivel
above the furler, making this the very last
part to furl.
Quick-locking pin
(Single-hand operated, captive
pin)
Special thimble with whipping
for low torsion ropes.
The head of the sail must be attached with a sling through the
loop hole in the thimble.
Anti-twist sheath
Gives the low torsion rope the
possibility to do some turns back
after the furling operation, without jamming the sail.
Moreover, the sheath creates a
wider furling axle, which allows
sails to be furled/dropped quicker.
Anti torsion rope
Special thimble with whipping
for low torsion ropes
Quick-locking pin
(Single-hand operated, captive pin)
Tack swivel
Endless furler Performance
Series (Stainless steel)
Tack swivel for bending on the
tack of the sail (with a 30 - 40 cm
long tack sling)
Endless rope
Snap shackle (Wichard)
(or screw pin shackle, like the one on
the swivel)
10
Double benefit: Gennex reefing systems are used for gennaker and Code0! Instead of the anti-torsion rope the
reinforced luff of a Code0 is connected. The tack swivel is inoperable and the tack sling must be removed.
Performance Series
A2-114-x
Handling of the
quick- locking pin
Installation and removal of the endless
rope from the furler
GENNEX
Specifications
Max. sail area (m2)
Max. length of the anti-torsion rope (m)
Max. working load (kN)
Breaking load (kN)
Diamater of rope pulley (mm)
Diameter of anti-torsion rope (mm)
Diameter of endless rope (mm)
Weight furler with tack swivel and snap shackle (kg)
Weight swivel with srew shackle (kg)
Weight of anti-torsion rope with Anti-twist sheath (kg/m)
Length of furler (mm) - A
Length of halyard swivel (mm) - B
Fork width furler/ swivel (mm)
Pin ø furler/ swivel (mm)
GENNEX
A2-114-3
GENNEX
A2-114-4
70
12
15
30
108
11
8
1,03
0,42
0,21
124
108
17
10
150
15
20
40
144
13
10
1,81
0,8
0,30
153
132
20
12
200
20
30
60
174
15
10
2,4
1,12
0,22
180
154
20
14
Set II
Set III
Set IV
B
A
Price list 09/ 2014. Dimensions and price changes without notice.
GENNEX
A2-114-2
Single parts of the set
Endless Furler Performance Series
FE II-P-HW
FE III-P-HW
FE IV-P-HW
Halyard swivel Performance Series
FAW II-P
FAW III-P
FAW IV-P
Standard length anti-torsion rope in the set (m)
12
15
20
W in the set (m)
Standard length Anti-twist sheath
11
14
19
Thimble (Set/ 2 pieces)
42/111
42/114
42/116
Tack sling with hook
42/35
42/40
42/40
Shnap shackle with fork (on the furler)
5979-6
5998-6
5999-6
L torsion rope with thimbles and anti-twist sheathing to desired fixed length. Please observe
Ready for installation assembly of the anti
the notes on page 14 to determine the desired fixed length! (Individual worked parts are excluded from exchanges)
Ordering number (Set)
T
Price (Set) incl. 19% VAT
GENN-II-P
GENN-III-P
GENN-IV-P
1.439 €
2.061 €
2.894 €
Further accessories on pages 14-16
BARTELS
BARTELS GmbH
Bergheimer Str. 26
88677 MARKDORF
GERMANY
Tel +49 (0)75 44 / 95860-0
Fax +49 (0)75 44 / 95860-60
http://www.bartels.eu
bartels@bartels.eu
Geschäftsführer Dipl.-Ing. Sven Bartels
Registergericht AG Freiburg HRB 581061
USt–IdNr./ VAT Reg. N o./ TVA : DE811801546
Terms and Coditions - www.bartels.eu/agb
Volksbank Markdorf
Konto 62338504
IBAN DE81 6906 1800 0062 3385 04
BLZ 690 618 00
BIC/SWIFT GENODE61UBE
11