Tech. Info - Seal Source Inc

Seal Source Inc.
Credit Application Form
Tech
Tech
5
Selection Chart for Seal
Tech
7
Glossary
Tech
Material for Sealing
Alphabetical Index
Tech
1
Tech
Tech
6
8
9
14
www.sealsourceinc.com
TECHNICAL
INFORMATION
Seal Application Request
Specialty Seal Manufacture Services Tech
Tel.: 1-888-609-SEAL
Fax: 1-888-717-SEAL
3
TECHNICAL
INFORMATION
Seal Source Inc.
www.sealsourceinc.com
Tech
2
info@sealsourceinc.com
Seal Source Inc.
TECHNICAL
INFORMATION
Tel.: 1-888-609-SEAL
Fax: 1-888-717-SEAL
Tech
3
www.sealsourceinc.com
TECHNICAL
INFORMATION
Seal Source Inc.
www.sealsourceinc.com
Tech
4
info@sealsourceinc.com
Seal Source Inc.
SEAL APPLICATION REQUEST
PISTON APPLICATION
ROD APPLICATION
FLUID to be sealed:______________________________________ Viscosity:_________________
PRESSURE: Normal:________________psi; min:______________ psi; max:_______________psi
TEMPERATURE: normal:____________ °F; min:_______________ °F; max:________________°F
SPEED: cycles/minutes:_____________; length of stroke:________ in.; average speed:_________
A:
B:
DYNAMIC SEAL
NEW DESIGN
STATIC SEAL
REPLACEMENT
TYPE OF SEAL (SEE OUR DRAWING)
Quantity Required:_________________________
Application Assemby Prints with all
necessary dimensions and tolerances
should be supplied if possible.
Special Requirements for seal and
specific environmental or operating
conditions, should be described more
completely:_______________________________
________________________________________
________________________________________
________________________________________
________________________________________
Tel.: 1-888-609-SEAL
Fax: 1-888-717-SEAL
Tech
Name: ________________________
Company: _____________________
Address: ______________________
City: _________________________
Zip: ________; State.: ____________
Telephone: (__)_________________
Fax: (__)______________________
5
www.sealsourceinc.com
TECHNICAL
INFORMATION
This Seal Application Request will enable us to assist you in your design request.
Seal Source Inc.
TECHNICAL
INFORMATION
SPECIALTY SEAL MANUFACTURING SERVICES
CUSTOM SEAL MANUFACTURING SERVICES
IN-HOUSE MACHINING AND COMPONENT FABRICATION
To meet your needs for special non-standard seals, oversized seals and related cylinder and pump components, we
offer a complete range of in-house machining services. Save on expensive tooling charges and factory delivery lead
times.
Up to 24” O.D. / 400,00 MM O.D, for immediate delivery
Up to 40” O.D. / 750-00 MM O.D. for deliveries within 2-3 weeks
Wear-rings, Bearings and Bushings, Piston Rings, Step Buffer Seals, U-Cup Seals
Loaded-Lip U-Cups, Back-up Rings, Modular Bearings, Vee-Packing Adaptors,
Piston Cup Seals, Wiper Seals and many other custom parts that we can machine or fabricate to suit your application requirements.
Select from any of our standard stock materials for machining your special parts:
PTFE (Teflon)
TFE/GF 15
TFE/GF15M
15% Glass filled PTFE
15% Glass & Moly filled PTFE
40% Bronze filled PTFE
60% Bronze filled PTFE
Carbon-Graphite filled PTFE
TFE/BR40
TFE/BR60
TFE/CG
NYLONS
6TMOS2
NYLON-GF
NYLOIL
Moly filled Nylon
Glass filled Nylon
Mineral filled Nylon
THERMOPLASTICS
DELRIN
PEEK
PPS
Filled Acetal grades for low friction
High temperature, high modulus materials
Filled Polyphenylene- Sulfide low swell
PHENOLIC
DYNAMAX
High-Load Resin and Fabric composites
We can also offer Nitrile, Viton and other rubber materials for machined parts.
Additional services available from our vast selection of materials and components:
Split Oil Seals cut in-house to 60” / 1500MM Diameter
Vee Packings cut in-house to 40” / 1000MM Diameter
Vulcanized O-Rings: Any size of inch or metric cross sections in a complete range of standard and non-standard
compounds. Proto-type and production quantities available for all special parts
All of these services are available through any of our Sealing Solutions’ locations.
www.sealsourceinc.com
Tech
6
info@sealsourceinc.com
Seal Source Inc.
SELECTION CHART FOR SEAL MANUFACTURING
BEARING
PISTON SEAL
STEP SEAL
WEAR RING
Inch
TECHNICAL
INFORMATION
BACKUP RING
Metric
Ød: ____________ + _________
ØD: ____________ + _________
H:
S:
Tel.: 1-888-609-SEAL
Fax: 1-888-717-SEAL
Tech
7
____________ + _________
____________ + _________
www.sealsourceinc.com
TECHNICAL
INFORMATION
Seal Source Inc.
www.sealsourceinc.com
Tech
8
info@sealsourceinc.com
Seal Source Inc.
GLOSSARY
TECHNICAL
INFORMATION
Tel.: 1-888-609-SEAL
Fax: 1-888-717-SEAL
Tech
9
www.sealsourceinc.com
Seal Source Inc.
TECHNICAL
INFORMATION
GLOSSARY
www.sealsourceinc.com
Tech
10
info@sealsourceinc.com
Seal Source Inc.
GLOSSARY
TECHNICAL
INFORMATION
Tel.: 1-888-609-SEAL
Fax: 1-888-717-SEAL
Tech
11
www.sealsourceinc.com
Seal Source Inc.
TECHNICAL
INFORMATION
GLOSSARY
www.sealsourceinc.com
Tech
12
info@sealsourceinc.com
Seal Source Inc.
GLOSSARY
TECHNICAL
INFORMATION
Tel.: 1-888-609-SEAL
Fax: 1-888-717-SEAL
Tech
13
www.sealsourceinc.com
Seal Source Inc.
TECHNICAL
INFORMATION
ALPHABETICAL INDEX
Nylon wear rings . . . . . . . . . . . . . . . . . . . . N7
A
Anti-extrusion rings
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . G50-G63
Metric . . . . . . . . . . . . . . . . . . . . . . L32, O53-O63
Asymmetrical u-cups
Inch
Rod, heavy duty . . . . . . . . B2, B15, B23-B26
Rod, light duty . . . . . . . . . . . . . B8, B17, B20
Rod, w/ anti-extrusion ring . . . . . . . . B22-B24
Rod, standard . . . . . . . . . . . . . . . . . . . . . B10
Rod, pneumatic . . . . . . . . . . . . . . . . . . . . B21
Piston, heavy duty . . . . . . . . . . . . . . . . . . D4
Piston, light duty . . . . . . . . . . . . . . . . . . . . D8
Piston, standard . . . . . . . . . . . . . . . . . . . . D2
Piston, K-Seal . . . . . . . . . . . . . . . . . . . . . D10
Double lip rod seal . . . . . . . . . . . . . . . . . B10
Metric
Rod . . . . . . . . . . . . . . . . . . . . . . J2, J15-J30
Rod pneumatic . . . . . . . . . . . . . . . . . . . . J10
Rod, w/ anti-extrusion ring . . . . . . . . . . . . J29
Bearings, self aligning
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F32
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . N25-28
Block vees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E21
Buffer rings
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . B27-B36
Metric . . . . . . . . . . . . . . . . . . . J40-J45, J48-J51
Buna-N
o-ring cord
inch – Buna-N . . . . . . . . . . . . . . . . . . . . . G46
metric . . . . . . . . . . . . . . . . . . . . . . . . . . . O51
o-rings, inch . . . . . . . . . . . . . . . . . . . . . G24-G43
o-rings, metric . . . . . . . . . . . . . . . . . . . . O4-O48
u-seals
inch . . . . . . . . . . . . . . . . . . . . C61-C67, C70
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . L14
Wiper ring cord . . . . . . . . . . . . . . . . . . . . . . A27
C
B
Backup rings
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . G50-G63
Buna-n rubber . . . . . . . . . . . . . . . . . . . . . G50
Poly-temp . . . . . . . . . . . . . . . . . . . . . . . . G63
Nylon . . . . . . . . . . . . . . . . . . . . . . . . . . . G54
ptfe . . . . . . . . . . . . . . . . . . . . . . . . G50, G63
Urethane . . . . . . . . . . . . . . . . . . . . . . . . . G50
Modular . . . . . . . . . . . . . . . . . . . . . . . . . C37
Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G44
Metric
Nylon . . . . . . . . . . . . . . . . . . . . . . . L32, O58
Urethane . . . . . . . . . . . . . . . . . . . . . . . . . O55
Ptfe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O53
Bearings
Inch
DU/DV bearing . . . . . . . . . . . . . . . . . . . . . F30
Solid nylon bearing . . . . . . . . . . . . . . . . . F22
Telescopic bearing . . . . . . . . . . . . . . . . . . F22
Nylon wear rings . . . . . . . . . . . . . . . . . . . . F2
Phenolic wear rings . . . . . . . . . . . . . . . . . F14
Flexible guide rings . . . . . . . . . . . . . . . F18-19
T-shaped wear rings . . . . . . . . . . . . . . . . F17
Metric
DU/DV bearings . . . . . . . . . . . . . . . . . . . N21
Ptfe formed wear rings . . . . . . . . . . . . . . . N3
www.sealsourceinc.com
Phenolic wear rings . . . . . . . . . . . . . . . N8
Flexible guide rings . . . . . . . . . . . N17-20
Tech
Canned wipers
Metal clad, inch . . . . . . . . . . . . . . . . . . A40-A46
Metal clad, metric . . . . . . . . . . . . . . . . . . I26-I44
Capped piston t-seals
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D52
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L37
Chem.-cast rings . . . . . . . . . . . . . . . . . . . . . . . . . D49
Chevron packing
Individual vees
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E2
Vee sets
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E17
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . M2
Cord
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G46
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O51
Crown seals . . . . . . . . . . . . . . . . . . . . . . . . . D29-D35
Cups
Double acting piston cups
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . D12
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . L22
Huva . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C63
Piston . . . . . . . . . . . . . . . . . . . . . . . . . . D13-D22
u-cups
asymmetrical . . . . . . . . . . . B2-B26, D2-D10,
J2-J30, L2-L19
14
info@sealsourceinc.com
Seal Source Inc.
ALPHABETICAL INDEX
D
D – style wipers
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . A7-A14
Metric . . . . . . . . . . . . . . . . . . . . . . . . . I9-I17
E
Exclusion rings
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . G50-G63
Metric . . . . . . . . . . . . . . . . . . . . . . L32, O53-O63
External retainer rings
Tru-arc type
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . H13
Symmetrical u-cups . . . . . . . . . . . . . . . . . . . C43
High temp loaded u-cups . . . . . . . . . . . . . . . C4-C36
Homogenous u-cups . . . . . . . . . . . . . . . . . . C63, C70
Huva cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C63
Hydrolock vee sets . . . . . . . . . . . . . . . . . . . D64, E22
Hydrolock guidelock piston bearings . . . . . . . . . E25
I
Internal retainer rings
Tru-arc type
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . H12
Iron piston rings
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D54
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L20
L
Lathe cut o-rings (TS) . . . . . . . . . . . . . . . . . . . . . G24
F
M
Flange seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . G46
Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G45
Flexible guide bearings
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . F18-F19
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . N17-N20
Fluorocarbon products
o-rings, inch . . . . . . . . . . . . . . . . . . . . G24-G-43
o-rings, 90 durometer . . . . . . . . . . . . . . G24-G43
u-cups . . . . . . . . . . . . . . . . . . . . . . C4-C36, C63
Metal clad wipers
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . A40-A47
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . I26-I44
Metal piston rings
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D54
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L20
Metric parts
Asymmetrical piston u-cups . . . . . . . . . . L2-L17
Asymmetrical rod u-cups . . . . . . . . . . . . . J2-J20
Backup rings . . . . . . . . . . . . . . . . . . . . O53-O63
Capped piston T-seals . . . . . . . . . . . . . . . . . L37
Cast iron piston rings . . . . . . . . . . . . . . . . . . L20
DV bushings . . . . . . . . . . . . . . . . . . . . . . . . . N23
Flexible guide bearings . . . . . . . . . . . . . N17-N20
Metal clad wipers . . . . . . . . . . . . . . . . . . I26-I44
O-rings . . . . . . . . . . . . . . . . . . . . . . . . . . O4-O52
o-ring cord . . . . . . . . . . . . . . . . . . . . . . . . . . O51
o-ring kits . . . . . . . . . . . . . . . . . . . . . . . . . . . O52
o-ring splice kit . . . . . . . . . . . . . . . . . . . . . . O52
double acting piston seals . . . . . . . . . . . L24-L39
rod buffers . . . . . . . . . . . . . . . . . . . . . . . J40-J45
Rod seals . . . . . . . . . . . . . . . . . . . . . . . . J2-J37
Snap in wipers . . . . . . . . . . . . . . . . . . . . . I2-I25
Symmetrical u-cups . . . . . . . . . . . . . . . . K2-K14
Vee packing sets . . . . . . . . . . . . . . . . . . . . . . M2
Wear rings . . . . . . . . . . . . . . . . . . . . . . . N2-N20
Modular backup rings . . . . . . . . . . . . . . . . . . . . . C37
G
Guide bearings
Inch
Nylon bearings . . . . . . . . . . . . . . . . . . . . . F2
Flexible guide bearings . . . . . . . . . . . . . . . F18
Wear rings . . . . . . . . . . . . . . . . . . . . . F2-F30
Metric
Flexible guide bearings . . . . . . . . . . N17-N20
Wear rings . . . . . . . . . . . . . . . . . . . . . N2-N21
Guidelock piston bearings- Hydrolock . . . . . . . . . E25
H
Heavy duty seals
Rod u-cups . . . . . . . . . . . . . . . . . . . . . . B2, B15
Piston u-cups . . . . . . . . . . . . . . . . . . . . . . . . . D4
Tel.: 1-888-609-SEAL
Fax: 1-888-717-SEAL
Tech
15
www.sealsourceinc.com
TECHNICAL
INFORMATION
heavy duty . . . . . . . . . B2, B15, B23, D4, J30
light duty . . . . . . . . . . . . . . . B8, B17,C56, D8
Metric . . . . . . . . . . . . . . . J2-J20, K2, L2-L17
Symmetrical . . . . . . . . . . . . C4-C36,C41-C70
Seal Source Inc.
TECHNICAL
INFORMATION
ALPHABETICAL INDEX
N
Neo-fab piston cups . . . . . . . . . . . . . . . . . . . . . . D13
Nylon bearings
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F22
O
O-rings
inch
70 durometer . . . . . . . . . . . . . . . . . . . . . G24
90 durometer . . . . . . . . . . . . . . . . . . . . . G24
Boss . . . . . . . . . . . . . . . . . . . . . . . . . . . . G43
Cord, 70 durometer rubber . . . . . . . . . . . G46
Cord, 75 durometer viton . . . . . . . . . . . . G46
Ethylene-propylene . . . . . . . . . . . . . . . . . G24
Fluorocarbon 75 durometer . . . . . . . . . . . G24
Fluorocarbon 90 durometer . . . . . . . . . . . G24
Fluorocarbon Boss . . . . . . . . . . . . . . . . . G43
Quad rings . . . . . . . . . . . . . . . . . . . . . . . G24
Silicone . . . . . . . . . . . . . . . . . . . . . . . . . . G24
Square (TS) . . . . . . . . . . . . . . . . . . . . . . G24
Ptfe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G24
Urethane . . . . . . . . . . . . . . . . . . . . . . . . . G24
Kits
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . G44
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . O52
Splice kits . . . . . . . . . . . . . . . . . . . . . . . . O52
Metric o-rings . . . . . . . . . . . . . . . . . . . . . . O4
Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . O51
O-ring cone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G45
O-ring lube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G45
O-ring installation data . . . . . . . . . . . . . . . . . . . . . G2
P
Phenolic wear rings
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F14
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N9
Pip rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D36
Piston cups
Double acting . . . . . . . . . . . . . . . . . . . . D12, L22
Neo-fab (CF) . . . . . . . . . . . . . . . . . . . . . . . . D13
Rubber (CH) . . . . . . . . . . . . . . . . . . . . . . . . . D16
Urethane (CS & CT) . . . . . . . . . . . . . . . D19-D22
Piston rings
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D54
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L20
www.sealsourceinc.com
Tech
Piston seals
Capped T-seals
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . D52
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . L37
Crown seals . . . . . . . . . . . . . . . . . . . . . D29-D33
Nylon step-cut (Chemcast) . . . . . . . . . . . . . . D50
Piston seals with energizers
Inch . . . . . . . . . . . . . . . . D29-D33, D37-D51
Metric . . . . . . . . . . . . . . . . . . . L24-L33, L37
Unirings . . . . . . . . . . . . . . . . . . . . . . . . . . . . D27
u-seals
inch . . . . . . . . . . . . . . . . . . . . . . . . . . . D2-D8
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . L2
Pneumatic K-style u-cups . . . . . . . . . . . . . . . . . . D10
Polypacks . . . . . . . . . . . . . . . . . . . . . . . . . . . C4-C36
Pip rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D36
Press-in wipers
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . A40-A46
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . I26-I44
Q
Quad rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G24
Quad ring kits . . . . . . . . . . . . . . . . . . . . . . . . . . . G44
R
Retainer rings
Inch
Tru-Arc type . . . . . . . . . . . . . . . . . . H12-H13
Rod T-seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B37
Rod bearings
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . F20-F30
Rod buffers
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . B27-B35
Metric . . . . . . . . . . . . . . . . . . . J40-J42, J48-J51
Rod scrapers (wipers)
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2-A49
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . I2-I50
Rubber piston cups . . . . . . . . . . . . . . . . . . . . . . . D16
Rubber u-cups
Inch . . . . . . . . . . . . . . . . . . . . . . . C61-C67, C70
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . J10, L14
16
info@sealsourceinc.com
Seal Source Inc.
ALPHABETICAL INDEX
Scrapers (wipers)
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2-A49
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . I2-I50
Snap rings
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . H12-H13
Spiral retainer rings
External . . . . . . . . . . . . . . . . . . . . . . . . .H25-H35
Internal . . . . . . . . . . . . . . . . . . . . . . . . .H15-H24
Split flange seals . . . . . . . . . . . . . . . . . . . . . . . . .G46
Split flange seal kits . . . . . . . . . . . . . . . . . . . . . .G44
Square o-rings . . . . . . . . . . . . . . . . . . . . . . . . . . .G24
Symmetrical u-cups
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . .C41-C60
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .K2
Urethane
O-rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G24
Piston seal . . . . . . . . . . .D2-D11, D27-D33, D39
U-cups
inch . . . . . . . . . . . . . . . . . . . . . . . . .C41-C56
metric . . . . . . . . . . . . . . . . . . . . . . . . .K2-K14
V
Vee rings
Individual . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E2
Vee packing set
Hydrolock . . . . . . . . . . . . . . . . . . . . . . .D64, E22
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E17
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .M2
W
T
T-seals
Capped piston
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D52
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . .L37
Piston . . . . . . . . . . . . . . . . . . . . . . . . . .D23-D26
Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B37
Thread seals . . . . . . . . . . . . . . . . . . . . . . . . . . . .G72
Tools
o-ring cone . . . . . . . . . . . . . . . . . . . . . . . . . .G45
O-ring picks . . . . . . . . . . . . . . . . . . . . . . . . .G45
Extractions tools . . . . . . . . . . . . . . . . . . . . . .G45
Tru-Arc retainer rings
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . .H12-H13
Twin lip rod seals
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . .B10-B19
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .J20
Wear ring
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F2-F20
Metic . . . . . . . . . . . . . . . . . . . . . . . . . . . .N2-N15
Wipers
Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A2-A49
Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I2-I50
Wipers cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A27
Z
Z-seals
. . . . . . . . . . . . . . . . . . . . . . . . . . . .B25-B26
U
U-cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C2-C68
U-seals
Inch
Heavy duty . . . . . . . . . . . . .B2, B15, C43, D4
Non-urethane . . . . . . . . . . . . . . . . . .C61-C70
Standard . . . . . . . . . . . . . . . . . . . . . . .C2-C23
Metric
Urethane . . . . . . . . . . . . . . . . . . . . . . .K2-K14
Non-urethane . . . . . . . . . . . . . . . . . .J10, L14
Uniring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D27
Tel.: 1-888-609-SEAL
Fax: 1-888-717-SEAL
Tech
17
www.sealsourceinc.com
TECHNICAL
INFORMATION
S
TECHNICAL
INFORMATION
Seal Source Inc.
www.sealsourceinc.com
Tech
18
info@sealsourceinc.com
Seal Source Inc.
TECHNICAL
INFORMATION
Tel.: 1-888-609-SEAL
Fax: 1-888-717-SEAL
Tech
19
www.sealsourceinc.com
TECHNICAL
INFORMATION
Seal Source Inc.
www.sealsourceinc.com
Tech
20
info@sealsourceinc.com
Seal Source Inc.
TECHNICAL
INFORMATION
Tel.: 1-888-609-SEAL
Fax: 1-888-717-SEAL
Tech
21
www.sealsourceinc.com