Ground Engaging Tools Catalogue
Transcription
Ground Engaging Tools Catalogue
Ground Engaging Tools Catalogue AUGUST 2015 EDITION 0800 REAL STEEL WWW.REALSTEEL.CO.NZ A 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Our Sales Team As well as our Wellington-based customer service team we have a team of sales staff that cover the whole country. We have expert sales staff on the ground across New Zealand with technical sales reps based in Auckland, Hamilton, Wellington, Christchurch and Dunedin. Real Steel can get to you anywhere. All sales staff are equipped with equipment for measuring parts on site and mobile technology to connect with Real Steel systems to aid in quick turnaround of parts. Luke Mathieson Robert Smith Managing Director Lower North Island Sales Manager Mobile: 021 993 004 Mobile: 021 685 135 Simon Stuckey Kerry Hocking Upper North Island Sales Manager Upper South Island Sales Manager Mobile: 021 0230 6164 Phone: 021 685 124 Geoff Moore Dean Aitken Central North Island Sales Manager Lower South Island Sales Manager Mobile: 021 685 220 & ESCO Product Manager Mobile: 022 685 1240 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Contents About Real Steel Cutting Edges Plow Bolts & Nuts Bar Stock Excavator Loader Dozer Scraper 2 15 16 17 18 19 20 21 CAT J-Series ESCO Conical Hyundai Komatsu ESCO Super V ESCO Ultralok 22 31 36 37 38 42 CAT Rippers ESCO & Komatsu Rippers 53 Pin-on Side Shrouds Weld-on Heel & Side Shrouds Lip Shrouds and Half Arrow 13 Bucket Teeth Rippers Shrouds Domite 54 55 56 57 Chocky Bars, Wear Bars Skid Bars, Wafers, Wear Plates Knives, Buttons, Donuts Grizzly Bars Grader Parts 4 – 6 ft Grader Blades 7 – 8 ft Grader Blades Overlays, End Bits Bit Boards, Snowplow Blades Scarifier Tips, Shanks, Wedges 59 60 61 62 63 65 66 67 68 69 47 48 52 1 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ 2 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ REAL STEEL We’re Real Steel. Everyone else bends the soft stuff. We bend Hardox. At 8.2m long our Yawei Press Brake is the largest in New Zealand. We need all 1000 tons of pressing force to form the hardest Swedish Steels. You haven’t seen anything until you’ve seen our press brake form a tipper body in one piece. Big plasma cutters and the longest sheets of steel. Our K5000 can plasma cut, gas cut, drill, mill, tap, counterbore and bevel the longest and widest sheets Working in extreme conditions calls for extreme materials and know how. We make top-end steel solutions that work harder, like you. • • • • • • • • • • • of high performance steel. And our K2500 cuts four 10m sheets of steel at once. These machines are the business end of our specialist design service. Our team of designers use the latest software, hooked directly into our machines. Whether you give Quarrying Mining Transport Earthmoving Recycling Scrap Metal Contracting Logging Concrete Asphalt Timber Processing us a sketch or digital file you can be sure your parts will fit. We make to spec, fast. Our huge library of drawings, at your disposal. We’ve been doing this for years and have drawings for almost everything. So call us first to save you the trouble of measuring up. We back up our superior products with superior service. We know that the best solutions are found by working together. Our people are always available to on-site measure and provide expert advice. 3 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Superior Swedish Steel. We’re the people with Swedish Steel. The cleanest, most consistent, most technically advanced high strength steel in the world. And we have the machines and the tooling to maximise its benefits. Hardox 500. Excellent wear resistance and weldability. Hardox 450 Wear Plate. Unmatched hardness and toughness. Guaranteed. Hardox is built to take a beating. Rock, sand, coal, minerals, scrap metal and any other hostile material have a hard time making a lasting impact on Hardox wear plates. Hardox 450 is an all-round wear resistant plate. It uniquely combines hardness and toughness, delivering top performance with a thinner plate and close tolerances. Hardox 450 has a hardness range of 425–475 HBW, a yield strength of 1100 MPa and a capacity for tight bending radiuses. Hardox 450 plate thicknesses range from 2 mm up to Ideal for buffer pins, gears, and sprockets, grizzly bars, sieves, knives and skips. Hardox 550. New Zealand’s hardest wear plate. Ideal for heavy duty cutting edges, hoppers and feeders, hammers, buckets and liner plates. 75 mm at sizes up to 2500 x 9600. and expertise allow us to make the highest-performing and HARDOX 450 longest-lasting steel solutions on the market. Ideal for tipper bodies, containers, crushers, conveyors and cutting edges. HARDOX 500 3.5 These unique qualities combined with our machinery, tooling 3.0 2.5 2.0 MILD STEEL 1.5 1.0 0.5 0 Relative useful life 4 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ HotHot rolled, rolled, extra extra highhigh strength, strength, coldcold forming forming steel steel for for lighter lighter vehicles. vehicles. Featuring Featuring Excellent Excellent formability, formability, sharp sharp radii radii andand good good weldability. weldability. Domex Domex comes comes in 10m in 10m longlong If your If your bucket bucket is costing is costing youyou time time andand money, money, we’ll we’ll make make it it better better than than new. new. ForFor newnew builds, builds, or to orarmour-up to armour-up or refurbish or refurbish your your existing existing bucket, bucket, we we stock stock andand custom custom make make highhigh performance performance wear wear parts parts for for every every application. application. We’ll We’ll reduce reduce your your running running costs costs andand maximise maximise your your efficiency efficiency because because we we know know what what works works best best andand where. where. sheets. sheets. We We useuse ourour huge huge plasma plasma cutters cutters to profile to profile cutcut super super strong strong andand lightweight lightweight truck truck chassis chassis kits.kits. Weldox Weldox 700 700 EE High High strength strength structural structural steel steel with with outstanding outstanding toughness toughness for for stronger, stronger, lighter lighter structures. structures. Uniform Uniform properties, properties, excellent excellent to to weld weld andand good good formability. formability. Suitable Suitable for for trailers, trailers, extended extended excavator excavator booms, booms, cranes, cranes, attachments. attachments. 5 REAL STEEL Domex Domex 700 700 MC MC We Wecan canmake make your yourbucket bucket work workharder, harder, longer. longer. Any way you slice it, our solutions are better. Our tougher, thinner high strength steel reduces tare weights, increases payloads and improves fuel economy. 6 Thanks to the longest sheets of high strength steel, our chassis kits are lighter and stronger, comprising fewer parts. 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ REAL STEEL Our pre-bent kits use far fewer welds to eliminate weaknesses and make fabrication quicker and easier. 7 Single-piece sides and floors that reduce fatigue, improve strength and stand the test of time. 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Uncompromising performance. Only with Hardox With just one piece of Hardox we’ve eliminated everything that hurts performance and decreases service life. This is unbeatable. 8 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Real Steel 8.2m design 4mm Hardox 450. One piece. One weld. We form tipper sides and decks from one piece of Hardox 450. Only one weld, from coaming rail to bottom skirt, headboard to tailgate. No seams, no laser welds, no weaknesses. You get reduced tare weight, increased payload and unparalleled service life. Typical RHS 8.2m design 5mm Corten with 5mm RHS. 8 Welds. 5 Pieces. Rib required. WEIGHT RHS –29% STATIC LOAD (STRUCTURAL LOAD CAPACITY) RHS +170% DEFLECTION (RESISTANCE TO DEFORMATION ) RHS 9 Indicates weld +272% 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ REAL STEEL We do more with one piece of precision-folded steel than others can do with ten. Wearparts that wear less. We don’t just pump out parts. We engineer to make them better. We create extreme solutions for extreme applications: • buckets • feeders • shears Real Steel is a member of the Hardox • tippers • screws • balers • crushers • pavers • shredders • dozers • pulverizers • drums • shovels • dredgers • liners • chutes • mixers • harvesters • hoppers • mills • and more … Wearparts network—dedicated experts using state-of-the-art techniques and processes certified by Swedish Steel. We have the skills to create and redesign solutions that enchance performance and optimise value. 10 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ REAL STEEL A crushing blow to wear. Crusher parts We stock a variety of heavy duty crusher parts in high performance materials that stand the test of time in extreme situations: • Manganese 14%, 18%, 24% • High Chrome 25%, 27% • Ceramic composites • Hardox cheek plates We supply Spokane blow bars, featuring the highest quality high chrome castings and ceramic composite technology. Superior design, improved performance We also custom design parts that offer increased performance using ultra heavy duty 24% Manganese and 3% Chrome. These Heavy Duty Komatsu BR380 jaws we re-designed achieved a dramaticly decreased cost per tonne over OEM jaws. As well as using tougher steel, our improved design crushes more efficiently and wears more evenly. REAL STEEL FIXED JAW OEM FIXED JAW Domite Real Tough Overlay Plate Domite is a high Our high chromium carbide abrasive performance resistant overlay wear plate with wear block a mild steel backing. combining extreme It is designed to hardness and toughness of 700 BHN for perform in high abrasion maximum wear resistance. Comes in a variety of areas. configurations. Weld it anywhere on your gear. 11 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Real Steel is proud to be New Zealand’s ESCO dealer. ESCO is a leading independent designer, manufacturer and provider of highly engineered wear parts and replacement products used in mining, construction, industrial, and oil and gas applications. ESCO Ultralok Hammerless System ESCO’s Ultralok system increases productivity via a and reduce maintenance. With the convenience of streamlined profile and point shapes engineered to a standard hand tool, the new hammerless locking dig more efficiently. Wear metal has been increased mechanism provides greater reliability and easier and strategically reallocated to extend service life field replacement. Benefits • Improved performance • One simple tool to operate • Harder, tougher alloy steel • Lower nose height • Increased safety • Better reliability • Smooth transition to adapter • Completely hammerless • More stabilized mating flats • All new streamlined teeth • Longer wear life • Reduced load on lock • Lock integrated into the point • 15% more usable wear metal 12 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ CUTTING EDGES Cutting Edges CUSTOM CUTTING EDGES PLOW BOLTS & NUTS EXCAVATOR LOADER DOZER SCRAPER 13 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Cutting Edges Custom Cutting Edges Cutting edges are our specialty. The hardest and toughest Swedish Steel combined with our machinery, tooling and expertise allows us to make the highest-performing and longest-lasting cutting edges on the market. Sales Support Our sales team on the ground across New Zealand can perform site visits to measure up so we can provide you with expert advice. We have a huge library of drawings for all major machine types and our large design team will ensure that you get cutting edges made exactly to spec and on time. Hardox Wear Plate HARDOX 450 Unmatched hardness and toughness. Guaranteed. It uniquely combines hardness and toughness, delivering top performance with a thinner plate and close tolerances. Hardox is built to take a beating. Rock, sand, coal, minerals, scrap metal and any other hostile material have a hard time making a lasting impact on Hardox wear plates. All-round abrasion resistant plate that combines hardness, strength and toughness for maximum payload and longer service life. Hardness: 425–475 HBW. Yield strength: 1100 MPa. Thicknesses: 2mm–75mm. Sizes: Up to 2500 x 9600. HARDOX 500 A bendable and weldable abrasion resistant plate for applications that demand higher wear resistance. Hardness: 450–540 HBW. Yield strength: 1300 MPa. Thicknesses: 8mm–50mm. Sizes: Up to 2500 x 8000. HARDOX 550 Has a hardness of 550 Brinell and toughness equal to Hardox 500. Increases wear life but not at the expense of crack integrity. Hardness: 525-575HBW. Yield strength: 1400 MPa. Thicknesses: 25mm–50mm. Sizes: Up to 2500 x 8000. We can also quickly and easily manufacture cutting edges from high quality Black Cat bar stock to suit your machine. SINGLE BEVEL BAR STOCK DOUBLEBEVEL BAR STOCK HALF ARROW BAR STOCK Colour Logo Colour Logo with white outline 14 V1–150707 Black and White 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ CUTTING EDGES PLOW BOLTS Cutting Edges Custom Cutting Edges, Plow Bolts CUSTOM HARDOX CUTTING EDGES Hardox wear plate's unique combination of hardness and toughness combined with our highest-performance machinery allows us to make cutting edges that perform like nothing else on the market. We are experts at optimising the design of cutting edges to suit your application. All this means you'll experience vastly superior wear life from thinner, lighter edges than you were using before. a B c Plow Bolt & Nut Chart A = Diameter D = Stocked Part B C D Bolt Length Bolt Square Nut Width 1/2” 12.7mm 19mm 5/8” 15.9mm 23mm 3/4” 19.0mm 28mm 7/8” 22.2mm 32mm 1” 25.4mm 37mm 1 1/4 31.7mm 47mm 1 3/8 34.9mm 51mm Bolt 1 ½” 1 ¾” 2” 2 ¼” 2 ½” 2 ¾” 3” 3 ¼” 3 ½” 3 ¾” 4” 4 ¼” 4 ½” 5 ” 15 V1–150707 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Cutting Edges Flat Bar Stock B a Single-Bevel Bar Stock A B Thickness Width BS-SBFB12X110 12 110 BS-SBFB16X110 16 BS-SBFB16X150 BS-SBFB20X150 Part Number A B Thickness Width BS-SBFB20X200 19 203 110 BS-SBFB25X200 25 203 16 152 BS-SBFB25X250 25 254 19 152 BS-SBFB30X300 30 300 A B Thickness Width Part Number Double-Bevel Bar Stock A B Thickness Width BS-DBFB16X150 16 152 BS-DBFB30X560 30 560 BS-DBFB20X200 19 203 BS-DBFB40X330 40 330 BS-DBFB20X250 19 254 BS-DBFB42X350 42 350 BS-DBFB25X200 25 203 BS-DBFB42X400 42 400 BS-DBFB25X250 25 254 BS-DBFB42X560 42 559 BS-DBFB30X330 30 330 BS-DBFB50X406 51 406 A B Part Number Part Number Pre-Drilled Double-Bevel Part Number Description Bolt Size Hole Spacing Thickness Width BS-DBFBP16X150 DB 16 X 150 5-8IN P X 6 5/8" 6" 16 152 BS-DBFBP20X200 DB 20 X 200 3-4IN P X 6 3/4" 6" 19 203 BS-DBFBP25X250- DB 25 X 250 3-4IN P X 6 3/4" 6" 25 254 BS-DBFBP25X250-- DB 25 X 250 7-8IN P X 6 7/8" 6" 25 254 BS-DBFBP30X330 DB 35 X 330 1IN P X 6 1" 6" 30 330 BS-DBFBP40X400 DB 40 X 400 1IN P X 6 1" 6" 42 406 All measurements in millimetres 16 V1–150707 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ CUTTING EDGES EXCAVATOR Cutting Edges Excavator Base Edges Bolt-on Edges Base Edges for Adapters Bucket Skins Side Cutters We can custom make wear parts for every major brand that work harder and last longer. For any parts that wear out, get in touch and we can help. 17 V1–150707 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Cutting Edges Loader Bucket Skins Side Cutters Base Edges Custom Bolt-on Side Protectors Bolt-on Edges Half Arrow We can custom make wear parts for every major brand that work harder and last longer. For any parts that wear out, get in touch and we can help. 18 V1–150707 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ CUTTING EDGES DOZER Cutting Edges Dozer Bolt-on Edges Hot Cupped End Bits Level Cut End Bits Blade Skins We can custom make wear parts for every major brand that work harder and last longer. For any parts that wear out, get in touch and we can help. 19 V1–150707 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Cutting Edges Scraper Bolt-on Edges Router Bits We can custom make wear parts for every major brand that work harder and last longer. For any parts that wear out, get in touch and we can help. 20 V1–150707 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ BUCKET TEETH CAT J-SERIES Bucket Teeth TEETH ADAPTERS NOSES PINS & RETAINERS 21 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Bucket Teeth CAT J-Series Our bucket teeth are made by Black Cat Blades — makers of high-quality aftermarket castings. Pick the right tool for the job We offer a wide variety of tip shapes and sizes, ensuring we have what you need for your specific application. Finding the right balance of strength, penetration and wear life is vital to choosing the tip shape for your application. Colour Logo Machine tonnage and fitment size chart TONNAGE 5-6 7-10 10-15 15-20 20-25 25-30 35-40 45-50 50-60 J-SERIES J200 J225 J250 J300 J350 J400 J460 J550 J600 STANDARD HEAVY DUTY ABRASION LOADER TOOTH Provides good balance of strength and digging capability. Ideal for most general purpose applications. For high-impact situations with abrasive, hard-topenetrate materials. ROCK CHISEL PENETRATION For highly abrasive material while providing good penetration and wear life. For tightly compacted, or frozen applications where penetration is the primary concern. TIGER PENETRATION PLUS Maximum penetration and self-sharpening. Ideal for dense material such as clay. A self-sharpening penetration tooth with more wear material and less cross-sectional area. TWIN TIGER HEAVY DUTY PENETRATION (RP2) Enhanced fracture capability, but less penetration and more wear than regular tiger. Ideal for breaking materials. LOADER TOOTH For high-impact, hardto-penetrate materials. Features more material in the high wear areas. 22 V3–150723 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ BUCKET TEETH CAT J-SERIES Bucket Teeth CAT J200, J225 F c Colour Logo with white outline Black and White G B I H l e a J k D Teeth EXTERIOR All measurements in millimetres A B Length Height POCKET C D E Width Width Height Product Part Number Weight J200 Standard TC-1U3202 1.3kg 146 63 57 44 44 J200 Tiger TC-T1U3202 1.5kg 165 70 60 44 44 J200 Twin Tiger TC-4T2203TV 1.7kg 171 68 60 44 44 J225 Standard TC-6Y3222 2kg 165 76 67 44 60 J225 Penetration TC-6Y8229 2.1kg 166 84 70 44 60 Adapters F G H Product Part Number Weight Bevel º J200 Adapter TC-1193205 2.2kg 25 65 23 95 J200 Bottom Strap Adapter TC-8J7525 1.5kg 25 20 15 90 J200 Weld on Nose TC-8J7525WN 1kg – – – – J225 Adapter TC-6Y3224 3.1kg 25 75 28 120 J225 Weld on Nose TC-J225WN 1.7kg – – – – Pins & Retainers = Diameter Top Strap Gap Bottom Strap PIN RETAINER I J K Product Part Number Length Diameter J200 Pin TC-8E6208 60 11 – – J200 Retainer TC-8E6209 – – 10.6 23 J225 Pin TC-6Y3228 67 14 – – J225 Retainer TC-8E6259 – – 13.6 30 23 V3–150723 Internal L External 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Bucket Teeth CAT J250 F c G B I H l e a J k D Teeth EXTERIOR A B Length Height POCKET C D E Width Width Height Product Part Number Weight J250 Standard TC-1U3252 3.2kg 190 86 76 56 67 J250 Tiger TC-1U3252VIP 2.9kg 203 90 78 56 67 J250 Twin Tiger TC-1U3252TVC 2.9kg 213 87 76 56 67 J250 Penetration Plus TC-1U3252PP 4.6kg 222 97 84 56 67 Adapters F G H Product Part Number Weight Bevel º J250 Bottom Strap Adapter TC-3G0169 5.2kg 25 35 38 175 J250 Bolt on Adapter TC-1U0257 10.2kg 20 215 30 215 J250 Adapter Twin Strap TC-1193253 5.2kg 25 110 35 140 J250 Flushmount Adapter TC-1U1254 6.9kg 25 220 – – J250 Weld On Nose TC-J250WN 2.4kg – – – – Pins & Retainers = Diameter Top Strap Gap Bottom Strap PIN RETAINER I J K Internal L Product Part Number Length Diameter External J250 Pin TC-8E6258 76 14 – – J250 Retainer TC-8E6259 – – 13.6 30 All measurements in millimetres 24 V3–150723 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ BUCKET TEETH CAT J-SERIES Bucket Teeth CAT J300 F c G B I H l e a J k D Teeth EXTERIOR A B Length Height POCKET C D E Width Width Height Product Part Number Weight J300 Standard TC-1U3302 4.4kg 215 100 84 67 76 J300 Standard Wide TC-9N4303 6.7kg 223 101 84 67 76 J300 Penetration TC-9J4309 4.1kg 220 103 89 67 76 J300 Rock Exploder TC-1U3302RE-R 5.6kg 251 103 90 67 76 J300 Shark Long TC-1U3302SYL-R 4.6kg 234 104 90 67 76 J300 Tiger TC-1U3302T 4.7kg 241 105 86 67 76 J300 Twin Tiger TC-1U3302TV 4.9kg 242 104 85 67 76 Adapters F G H Product Part Number Weight Bevel º J300 Adapter TC-3G6304 13kg 25 115 35 200 J300 Flushmount Adapter TC-1U0307 9.6kg 25 220 – – J300 Weld On Nose TC-J300WN 3.4kg – – – – Pins & Retainers = Diameter Top Strap Gap Bottom Strap PIN RETAINER I J K Internal L Product Part Number Length Diameter External J300 Pin TC-1073308 90 14 – – J300 Retainer TC-8E6259 – – 13.6 30 All measurements in millimetres 25 V3–150723 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Bucket Teeth CAT J350 F c G B I H l e a J k D Teeth EXTERIOR A B Length Height POCKET C D E Width Width Height Product Part Number Weight J350 Standard TC-1U3352 6.8kg 241 108 102 75 81 J350 Heavy Duty Abrasion TC-1U3352HDAL 6.4kg 241 120 106 75 81 J350 Penetration TC-9J4359 5.8kg 251 111 102 75 81 J350 Penetration Plus TC-1U3352PP 7.4kg 260 112 105 75 81 J350 Tiger TC-1U3352T 6.5kg 286 112 105 75 81 J350 Twin Tiger TC-1U3352TV 7.2kg 286 111 105 75 81 Adapters F G H Product Part Number Weight Bevel º J350 Adapter TC-3G8354 9kg 35 110 42 200 J350 Weld on Nose TC-J350WN 4.6kg – – – – Pins & Retainers = Diameter Top Strap Gap Bottom Strap PIN RETAINER I J K Internal L Product Part Number Length Diameter External J350 Pin TC-8E6358 105 19 – – J350 Retainer TC-8E6359 – – 18.5 40 All measurements in millimetres 26 V3–150723 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ BUCKET TEETH CAT J-SERIES Bucket Teeth CAT J400 F c G B I H l e a J k D Teeth EXTERIOR A B Length Height POCKET C D E Width Width Height Product Part Number Weight J400 Standard TC-1U3402 9.5kg 267 127 117 88 89 J400 Rock Chisel TC-1U3402RC 11.9kg 308 132 121 88 89 J400 Penetration TC-6Y7409 9.2kg 266 133 120 88 89 J400 Penetration Plus TC-1U3402PP 11.8kg 290 133 122 88 89 Adapters F Product Part Number J400 Adapter J400 Weld on Nose G H Weight Bevel º TC-6I6404 15.88kg 25 160 50 220 TC-J400WN 6.8kg – – – – Pins & Retainers = Diameter Top Strap Gap Bottom Strap PIN RETAINER I J K Internal L Product Part Number Length Diameter External J400 Pin TC-7T3408 117 22 – – J400 Retainer TC-7T3409 – – 21.5 42 All measurements in millimetres 27 V3–150723 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Bucket Teeth CAT J460 F c G B I H l e a J k D Teeth EXTERIOR A B Length Height POCKET C D E Width Width Height Product Part Number Weight J460 Standard TC-9W8452 11.6kg 298 127 130 100 101 J460 Penetration Plus TC-159-0459 15.2kg 327 141 135 100 101 J460 Rock Chisel TC-1U3452RC 14.3kg 330 140 135 100 101 J460 Heavy Duty Long TC-9N4452SC 16.3kg 310 137 135 100 101 J460 Tiger TC-9W8452VIP 13.3kg 357 140 136 100 101 J460 Twin Tiger TC-9W8452TV 14.8kg 357 138 136 100 101 Adapters F G H Product Part Number Weight Bevel º J460 Adapter TC-8E6464 21.9kg 25 220 55 260 J460 Weld on Nose TC-J460WN 8.72kg – – – – Pins & Retainers = Diameter Top Strap Gap Bottom Strap PIN RETAINER I J K Internal L Product Part Number Length Diameter External J460 Pin TC-8E0468 133 24 – – J460 Retainer TC-8E0469 – – 23.3 44 All measurements in millimetres 28 V3–150723 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ BUCKET TEETH CAT J-SERIES Bucket Teeth CAT J550 F c G B I H l e a J k D Teeth EXTERIOR A B D E Width Width Height Product Part Number Weight J550 Standard TC-9W8552 18.5kg 330 143 159 119 113 32.9kg 387 160 162 119 113 16kg 336 149 155 119 113 J550 Heavy Duty Penetration (RP2) TC-138-6552 Length Height POCKET C J550 Penetration TC-9W8559 J550 Penetration Plus TC-159-0559 24.1kg 371 159 162 119 113 J550 Rock Chisel TC-1U3552RC 22.6kg 381 159 161 119 113 J550 Tiger TC-9W8559VIP 16.3kg 381 148 159 119 113 J550 Twin Tiger TC-9W8559TVC 18.3kg 381 148 159 119 113 Adapters F G H Product Part Number Weight Bevel º J550 Adapter TC-3G9494 35.92kg 25 250 70 300 J550 Weld on Nose TC-J550WN 13.2kg – – – – Pins & Retainers = Diameter Top Strap Gap Bottom Strap PIN RETAINER I J K Internal L Product Part Number Length Diameter External J550 Pin TC-6Y8558 160 25 – – J550 Retainer TC-8E5559 – – 24.5 53 All measurements in millimetres 29 V3–150723 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Bucket Teeth CAT J600, J700 c F G B I l H e a J k D Teeth EXTERIOR A B Length Height POCKET C D E Width Width Height Product Part Number Weight J600 Penetration Plus TC-159-0607 38.5kg 425 187 195 146 137 J600 Rock Exploder TC-6I6602RE-R 37kg 460 185 190 146 137 J600 Tiger TC-T6I6602 35.7kg 457 185 200 146 137 J700 Penetrator TC-4T4709 40kg 420 210 195 155 144 Adapters F Product Part Number Weight Bevel º J600 Adapter TC-6I6604 51.5kg 25 Pins & Retainers = Diameter G H Top Strap Gap Bottom Strap 280 80 PIN 330 RETAINER I J Length Diameter K Internal L Product Part Number External J600 Pin TC-6I6608 192 30 – – J600 Retainer TC-6I6609 – – 29 58 J700 Pin TC-4T4708 195 32 – – J700 Retainer TC-4T4707 – – 31 64 All measurements in millimetres 30 V3–150723 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ BUCKET TEETH CAT J-SERIES Bucket Teeth ESCO Conical Our bucket teeth are made by Black Cat Blades — makers of high-quality aftermarket castings. Pick the right tool for the job We offer a wide variety of tip shapes and sizes, ensuring we have what you need for your specific application. Finding the right balance of strength, penetration and wear life is vital to choosing the tip shape for your application. Machine tonnage and fitment size chart TONNAGE 3-6 7-8 ESCO CONICAL 18 22 TIGER 7-10 10-15 15-20 20-25 25-30 35-40 25 30 35 40 Colour Logo 45 Maximum penetration and self-sharpening. Ideal for dense material such as clay. 50 STANDARD Provides good balance of strength and digging capability. Ideal for most general purpose applications. TWIN TIGER Enhanced fracture capability but more wear than regular tiger. Ideal for breaking materials such as mudstone. 31 V1–150508 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Bucket Teeth ESCO 18 c F G B I H l J a e Teeth k D EXTERIOR A Weight B Length Height POCKET C D E Width Width Height Product Part Number 18 Standard TE-18S 1kg 138 52 62 45 35 18 Tiger TE-18VIP 1kg 174 57 62 45 35 18 Twin Tiger TE-18TV 1.3kg 174 54 62 45 35 18 Rock Chisel TE-18RC 1.3kg 177 55 63 45 35 Adapters F Product Part Number Weight Bevel º 18 Adapter TE-850-18 1.6kg 35 Pins & Retainers G H Top Strap Gap Bottom Strap 60 22 PIN 100 RETAINER I J K L Length Thickness Length Thickness Product Part Number 18 Pin TE-18PN 53 6 – – 18 Retainer TE-18LK – – 36 13 All measurements in millimetres 32 V1–150508 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ BUCKET TEETH ESCO CONICAL Bucket Teeth ESCO 22, 25 c F G B I H l J a e Teeth k D EXTERIOR A POCKET B Length Height C D E Width Width Height Product Part Number Weight 22 Standard TE-22S 1.3kg 138 64 62 45 45 25 Standard TE-25S 2.3kg 178 75 85 62 55 25 Tiger TE-25VIP 2.9kg 228 80 89 62 55 25 Twin Tiger TE-25TV 3.3kg 228 80 89 62 55 Adapters F G H Product Part Number Weight Bevel º 22 Adapter TE-850-22 1.6kg 35 65 25 120 25 Adapter TE-850-25 3.1kg 15 110 25 160 Pins & Retainers Top Strap Gap Bottom Strap PIN RETAINER I J K L Length Thickness Length Thickness Product Part Number 22 Pin TE-22PN 64 7 – – 22 Retainer TE-22LK – – 44 13 30 Pin TE-25-30PN 75 9 – – 30 Retainer TE-25-30LK – – 38 11 All measurements in millimetres 33 V1–150508 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Bucket Teeth ESCO 30, 35 c F G B I H l J a e Teeth k D EXTERIOR A POCKET B Length Height C D E Width Width Height Product Part Number Weight 30 Standard TE-30S 2.7kg 178 78 95 72 50 30 Tiger TE-30VIP 3kg 215 78 101 72 50 30 Twin Tiger TE-30TV 3.2kg 215 78 101 72 50 35 Standard TE-35S 5kg 216 95 118 82 65 35 Tiger TE-35VIP 6.2kg 266 110 120 82 65 35 Twin Tiger TE-35TV 6.3kg 266 110 120 82 65 Adapters F G H Product Part Number Weight Bevel º 30 Adapter TE-850-30 3.9kg 15 140 32 185 35 Adapter TE-850-35 7.9kg 25 160 35 220 Pins & Retainers Top Strap Gap Bottom Strap PIN RETAINER I J K L Product Part Number Length Thickness Length Thickness 30 Pin TE-25-30PN 75 9 – – 30 Retainer TE-25-30LK – – 38 11 35 Pin TE-35PN 87 10 – – 35 Retainer TE-35-40LK – – 47 15 All measurements in millimetres 34 V1–150508 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ BUCKET TEETH ESCO CONICAL Bucket Teeth ESCO 40, 45 c F G B I H l J a e Teeth k D EXTERIOR A POCKET B Length Height C D E Width Width Height Product Part Number Weight 40 Standard TE-40S 6.4kg 230 105 130 98 72 45 Standard TE-45S 9.2kg 230 105 130 112 75 Adapters F Product Part Number Weight Bevel º 40 Adapter TE-850-40 14.7kg 25 Pins & Retainers G H Top Strap Gap Bottom Strap 260 42 PIN 175 RETAINER I J K L Length Thickness Length Thickness 95 13 – – – – 47 15 Product Part Number 40 Pin TE-40PN 40 Retainer TE-35-40LK 45 Pin TE-45PN 107 14 – – 45 Retainer TE-45LK – – 58 16 All measurements in millimetres 35 V1–150508 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Bucket Teeth Hyundai R140–R310 Our bucket teeth are made by Black Cat Blades — makers of high-quality aftermarket castings. STANDARD Provides good balance of strength and digging capability. Ideal for most general purpose applications. Colour Logo Colour Logo with white outline Black and White Pick the right tool for the job ROCK CHISEL We offer a wide variety of tip shapes and sizes, ensuring we have what you need. Finding the right balance of strength, penetration and wear life is vital to choosing the tip shape for your application. For highly abrasive material. Provides good penetration and wear life. c B TIGER e Maximum penetration for dense material like clay. Self-sharpening. D a I TWIN TIGER l J k Teeth Product Enhanced fracture capability. Ideal for breaking materials. EXTERIOR All measurements in millimetres Part Number Weight A B Length Height POCKET C D E Width Width Height R140-210 Standard Long Tooth THY-161-3027 4.8kg 219 91 99 72 60 R140-210 Rock Chisel THY-161-3027RC 6.4kg 254 93 98 72 60 R140-210 Tiger THY-161-3027T 4.26kg 222 89 97 72 60 R140-210 Twin Tiger THY-161-3027WT 5.3kg 241 90 97 72 60 R290-310 Rock Chisel THY-162-3046RC 10.2kg 292 112 121 82 80 R290-310 Tiger THY-162-3046T 9.3kg 292 110 122 82 80 Pins & Retainers = Diameter PIN RETAINER I J Length Diameter K Product Part Number 20T Pin THY-E1613035 108 20 – – 30T Pin THY-262-5004 120 20 – – 20T/30T Retainer THY-61E511150 – – 19 33 36 V1–150508 Internal L External 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ BUCKET TEETH KOMATSU Bucket Teeth Komatsu PC200–PC600 Our bucket teeth are made high-quality aftermarket castings Black Cat Blades. STANDARD Provides good balance of strength and digging capability. Ideal for most general purpose applications. Colour Logo Colour Logo with white outline Pick the right tool for the job ROCK PENETRATOR (RP2) We offer a wide variety of tip shapes and sizes, ensuring we have what you need. Finding the right balance of strength, penetration and wear life is vital to choosing the tip shape for your application. LOADER TOOTH For high-impact, hard-to-penetrate materials. Features more material in the high wear areas. c e B Black and White F I D G a J H All measurements in millimetres Teeth EXTERIOR A B D E Width Width Height Product Part Number Weight PC200 Standard TK-205-70-19570 4.4kg 219 100 94 72 80 PC300 Standard TK-207-70-14151HX 6.6kg 241 123 117 92 85 – 310 122 126 92 85 9.7kg 274 124 152 110 92 29.7kg 349 195 181 133 136 PC300 Rock Penetrator (RP2) TK-423-847-1140RP2 PC400 Standard TK-208-70-14152HX PC600 Standard TK-209-70-54210 Length Height POCKET C Adapters F Product Part Number Weight Bevel º PC200 Straight Adapter TK-205-939-7120 7.2kg 90 Pins G H Top Strap Gap Bottom Strap 94 38 155 PIN I J Length Diameter Product Part Number PC200 Pin TK-092-44-02496P 100 25 PC300 Pin TK-175-78-21740P 120 25 PC400 Pin TK-092-44-03036P 140 30 PC600 Pin TK-209-70-54240P 167 35 37 V2–150513 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Bucket Teeth ESCO Super V Genuine ESCO Super V SUPER V tooth system is a proven performer in construction, aggregate and mining applications around the world. The SUPER V system offers excellent performance and productivity in all applications. One-piece vertical drive pin Machine tonnage and fitment size chart TONNAGE <7 SUPER V 17-18 7-10 10-15 15-20 20-25 25-30 35-40 45-50 50-60 19 23 29 33 39 43 51 61 VY — TIGER For extremely hard to penetrate materials. Top and bottom ribs provide strength and allow the point to stay sharp throughout its wear life. SYL — GENERAL PURPOSE LONG Standard general purpose shape for excavator applications. Wears sharp for excellent penetration during entire tooth life. TVY — TWIN TIGER Enhanced fracture capability, but less penetration and more wear than regular tiger. Ideal for breaking materials. SDX — CHISEL HEAVY For moderate penetration and wear metal, as well as excellent strength. Ideal for tough applications that need both wear metal and penetration. FLARE For general purpose digging and clean-up. The wide blade maximizes bucket capacity. An excellent choice for trench bottoms and foundations. 38 V1–150508 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ BUCKET TEETH SUPER V Bucket Teeth ESCO Super V B c Pin examples. Each size has a different design. a Teeth c A B Product Part Number Weight Length Width V13 General Purpose Long TE-V13SYL 0.7kg 100 54 V17 General Purpose NCL* TE-V17TYL 1.1kg 140 65 V19 General Purpose Long TE-V19SYL 2.2kg 165 80 V23 General Purpose Long TE-V23SYL 2.9kg 191 90 V29 Chisel Heavy TE-V29SDX 5kg 212 96 V33 Chisel Heavy TE-V33SDX 7kg 238 108 V39 General Purpose Long TE-V39SYL 10kg 257 122 V39 Chisel Heavy TE-V39SDX 10kg 267 122 V39 Tiger TE-V39VY 8kg 297 122 V39 Twin Tiger TE-V39TVY 9kg 297 122 *NCL = Non-centreline Pins C Product Part Number Length V13–V17 Pin TE-V13-17PN 48 V19–V23 Pin TE-V23PN 52 V29 Pin TE-V29PN 78 V33 Pin TE-V33PN 86 V39 Pin TE-V39PN 95 All measurements in millimetres 39 V1–150508 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Bucket Teeth ESCO Super V B c Pin shapes differ by size a Teeth c A B Product Part Number Weight Length Width V43 Flare TE-V43S9F 17kg 312 137 V43 Chisel Heavy TE-V43SDX 14kg 293 137 V51 Chisel Heavy TE-V51SDX 19kg 324 150 V51 Tiger TE-V51VY 13kg 356 150 V59 Chisel Heavy TE-V59SDX 23kg 352 164 V61 Chisel TE-V61SD 26kg 381 170 V69 Chisel TE-V69SD 37kg 419 210 V71 Chisel TE-V71SD 46kg 447 243 V81 Chisel TE-V81SD 77kg 516 281 Pins C Product Part Number Length V43 Pin TE-V43PN 105 V43 Hot Slag Pin TE-V43HPN 105 V51 Pin TE-V51PN 111 V59 Pin TE-V59PN 121 V61 Pin Assembly TE-V61PNA 130 V69 Pin Assembly TE-V69PN 145 V71 Pin Assembly TE-V71PN 159 V81 Pin Assembly TE-V81PN 185 All measurements in millimetres 40 V1–150508 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ BUCKET TEETH ULTRALOK See how it works at www.tiny.cc/ultralok Easier. Safer. Longer lasting. esco ultralok Genuine only at 41 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Bucket Teeth ESCO Ultralok The Ultralok Hammerless System ESCO’s Ultralok system increases productivity with a streamlined profile, point shapes engineered to dig more efficiently, and using harder and tougher alloy steel than competing systems. Wear metal has been increased and strategically reallocated to extend service life and reduce maintenance. With the convenience of a standard hand tool, the new hammerless locking mechanism provides greater reliability and easier field replacement. Machine tonnage and fitment size chart Simple prybar for locking, unlocking and point removal Easy and unobstructed lock access TONNAGE 7-10 10-15 15-20 20-25 25-30 30-40 40-60 ULTRALOK U20 U25 U30 U35 U40 U45 ESCO CONICAL 25 CAT J-SERIES 30 35 40 45 50 J225 J250 J300 J350 J400 J460 U55 60-75 U60 55–65 65–70 J550 J600 P — TIGER / PICK For extremely hard to penetrate materials. Top and bottom ribs provide strength and allow the point to stay sharp throughout its wear life. Point shape with more useable wear metal S — STANDARD F — FLARE An excellent choice for general purpose applications. Wears sharp to maintain penetration, with a centre rib for strength. For general purpose digging and clean-up. The wide blade maximizes bucket capacity. An excellent choice for trench bottoms and foundations. C — CHISEL Primarily for excavators. Good penetration and extra wear metal in tough applications. The heavy-duty rib and unique teardrop relief in the bottom keep the point sharp throughout its wear life. H — HEAVY For extremely abrasive applications. Very long point life. Designed to maintain sharpness as it wears. 42 V3–150701 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ BUCKET TEETH ULTRALOK Bucket Teeth ESCO Ultralok U20, U25 B c Lock integrated into tooth. Only prybar required. D e a Teeth A B Weight Length Width Product Part Number U20 Standard TE-U20S 2kg 176 78 U20 Chisel TE-U20C 2kg 191 78 U20 Tiger TE-U20P 1.7kg 202 78 U25 Standard TE-U25S 3.4kg 211 93 U25 Chisel TE-U25C 3.4kg 229 93 U25 Tiger TE-U25P 2.9kg 224 93 Adapters C D E Product Part Number Weight Bevel º Top Strap Gap Bottom Strap U20 Adapter TE-5854-U20 3.8kg 30 79 25 165 U25 Adapter — 30mm Lip TE-5849-U25 6.2kg 30 95 30 190 U25 Adapter — 25mm Lip TE-5854-U25 6.3kg 30 95 25 190 All measurements in millimetres 43 V3–150701 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Bucket Teeth ESCO Ultralok U30, U35 B c Lock integrated into tooth. Only prybar required. D e a Teeth A B Weight Length Width Product Part Number U30 Standard TE-U30S 5kg 240 105 U30 Chisel TE-U30C 5kg 259 105 U30 Tiger TE-U30P 4.1kg 274 105 U35 Standard TE-U35S 7kg 265 119 U35 Chisel TE-U35C 7kg 291 119 U35 Tiger TE-U35P 5.7kg 298 119 Adapters C D E Product Part Number Weight Bevel º Top Strap Gap Bottom Strap U30 Adapter — 30mm Lip TE-5849-U30 9.0kg 30 118 30 214 U30 Adapter — 40mm Lip TE-5850-U30 8.7kg 30 116 40 212 U35 Adapter TE-5855-U35 11.9kg 30 127 40 235 All measurements in millimetres 44 V3–150701 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ BUCKET TEETH ULTRALOK Bucket Teeth ESCO Ultralok U40, U45 B c Lock integrated into tooth. Only prybar required. D e a Teeth A B Weight Length Width Product Part Number U40 Standard TE-U40S 10kg 294 134 U40 Chisel TE-U40C 10kg 328 134 U40 Tiger TE-U40P 8.1kg 335 134 U40 Heavy TE-U40H 12.1kg 326 134 U45 Standard TE-U45S 14kg 328 149 U45 Chisel TE-U45C 14kg 366 149 U45 Hot Slag Chisel TE-U45CH 14kg 366 149 U45 Tiger TE-U45P 11kg 369 149 U45 Heavy TE-U45H 17kg 364 149 U45 Flare TE-U45F 18kg 356 149 Adapters C D E Product Part Number Weight Bevel º Top Strap Gap Bottom Strap U40 Adapter TE-5856-U40 17.1kg 30 145 50 264 U40 Weld on Nose TE-WN-U40 7.9kg – – – – U45 Adapter TE-5856-U45 23kg 30 151 50 285 All measurements in millimetres 45 V3–150701 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Bucket Teeth ESCO Ultralok U55, U60 B c Lock integrated into tooth. Only prybar required. D e a Teeth A B Product Part Number Weight Length Width U55 Standard TE-U55S 20.5kg 372 169 U55 Chisel TE-U55C 20.6kg 415 169 U55 Tiger TE-U55P 16.5kg 420 169 U55 Heavy TE-U55H 24.5kg 413 169 U60 Standard TE-U60S 30kg 429 195 U60 Chisel TE-U60C 30kg 454 195 U60 Heavy TE-U60H 35.6kg 454 195 U60 Tiger TE-U60P 24.7kg 466 195 Adapters C D E Product Part Number Weight Bevel º Top Strap Gap Bottom Strap U55 Adapter — 65mm Lip TE-5857A-U55 32.5kg 30 164 65 302 U55 Adapter — 50mm Lip TE-8801A-U55 28.6kg 30 165 50 302 U55 Adapter — 65mm Lip TE-8813A-U55 34.6kg 30 321 65 196 U60 Adapter TE-5898A-U60 50.9kg 30 379 80 194 All measurements in millimetres 46 V3–150701 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ RIPPERS Rippers BOOTS SHANKS NOSES GUARDS PINS & RETAINERS 47 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Rippers Rippers Our ripper parts are made by Black Cat Blades — makers of high-quality aftermarket castings. Pick the right tool for the job Colour Logo CENTRELINE Standard ripper tooth offering good penetration and wear life. PENETRATION A heavy duty rib reinforces the center of the tooth and improves direction of material. We also make custom ripper shanks from Hardox that are harder, tougher and last longer. Our sales and design team are experts at designing wear parts specifically optimised for your application. Give us a call so we can make you a custom Hardox ripper shank that will outlast the competition hands-down. Custom-made 75mm Hardox CAT D7 Ripper Shanks 48 V1–150715 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ RIPPERS CAT Rippers CAT D4/5, D6/7 Rippers G H c B e F I a D H J Boots EXTERIOR POCKET A B C D E Product Part Number Weight Length Height Width Width Height D4/5 Penetration RC-6Y0309 5.6kg 292 106 84 60 85 D6/7 Centreline RC-6Y0352 11.8kg 356 148 120 77 115 D6/7 Penetration RC-6Y0359 12.7kg 356 147 120 77 115 Shanks & Noses F G H Product Part Number Weight Length Width Thickness D4/5 Ripper Shank RC-9J6586 28.9kg 542 137 57 D4/5 Weld On Nose RC-8E7300 2.7kg – – 52 D6/7 Ripper Shank RC-9J3139 55.6kg 721 174 74 D6/7 Weld On Nose RC-8E7350 5.4kg – – 65 Pins & Retainers PIN RETAINER I J Product Part Number Length Diameter D4/5 Ripper Pin RC-9W2668 89 19 Use J350 Retainer D6/7 Ripper Pin RC-9W2678 106 19 Use J350 Retainer All measurements in millimetres 49 V1–150715 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Rippers CAT D8/9 Rippers I F c B G H e a J D k H Boots EXTERIOR A B D E Width Width Height Product Part Number Weight D8/9 Centreline Short RC-9W2451 18.4kg 327 172 143 88 130 D8/9 Centreline Intermediate RC-9W2452 22.2kg 381 171 143 88 130 D8/9 Penetration Intermediate RC-4T5452 18.6kg 397 173 143 88 130 Noses & Protectors Length Height POCKET C F G H I Product Part Number Weight Length Internal Gap Hole Spacing Thickness D8/9 Weld On Nose RC-9U9694 19.5kg – – 83 75 D8/9 Shank Protector RC-6J8814 12.2kg 432 80 311 108 D8/9 HD Shank Protector RC-8E1848 25.4kg 486 82 311 127 Pins & Retainers PIN RETAINER J K Product Part Number Length Diameter D8/9 Ripper Pin RC-6Y3394 128 25 Use J550 Retainer D8/9 Ripper Pin — Centre Ring RC-4T2479 119 25.4 – All measurements in millimetres 50 V1–150715 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ RIPPERS CAT Rippers CAT D10/11 Rippers c B F a F H G G I Centre Ring Pin Boots EXTERIOR A B D E Width Width Height Product Part Number Weight D10/11 Penetration Intermediate RC-4T5502 30.4kg 425 235 165 105 180 D10/11 Penetration Long RC-4T5503 30.4 470 235 165 105 108 Pins & Retainers = Diameter Length Height POCKET C PIN RETAINER F G H External I Product Part Number Length Diameter Internal D10/11 Pin RC-6Y1204 142 33 – – D10/11 Retainer RC-6Y1202 – – 63 31 D10/11 Pin — Centre Ring RC-6J8811 115 32 – – D10/11 Long Pin — Centre Ring RC-3G0500 152 32 – – All measurements in millimetres 51 V1–150715 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Rippers ESCO & Komatsu Komatsu Ripper Boot ESCO Ripper Nose ESCO Ripper Boot c F H B G e a I Komatsu Pin & Retainer F ESCO Pin & Retainer G D Boots EXTERIOR A POCKET B Length Height C D E Width Width Height Product Part Number Weight ESCO 22 Ripper Boot RE-22R-10 3.8kg 270 92 85 60 75 ESCO 25 Ripper Boot RE-25R11-2HX 6.2kg 306 11.4 97 66 90 ESCO 35 Ripper Boot RE-35R15HX 14.6kg 394 165 125 90 120 ESCO 39 Ripper Boot RE-39-R-16 22.1kg 460 191 155 95 132 Komatsu D60–D75 Ripper Boot RK-141-78-11253 11.7kg 280 163 122 80 110 Komatsu D275/D355 Ripper Boot RK-195-78-21331 16.2kg 360 196 124 80 160 Noses F G H Product Part Number Weight Length Depth Thickness ESCO 25 Weld On Nose RE-25WN 8.2kg – – – ESCO 35 Weld On Nose RE-35WN 20kg – – – Pins & Retainers PIN RETAINER F G H I Length Diameter Length Diameter Product Part Number ESCO 22 Ripper Pin & Retainer RE-22RPG & RE-22RBG 83 13 56 21 ESCO 25 Ripper Pin & Retainer RE-25RPG & RE-25RBG 94 13 62 21 ESCO 35 Ripper Pin & Retainer RE-35RPG & RE-35RBG 121 13 81 21 ESCO 39 Ripper Pin & Retainer RE-39RPG & RE-39RBG 133 13 89 21 Komatsu Pin for D60–D355 Boot TK-175-78-21740P 117 25 – – All measurements in millimetres 52 V1–150715 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ SHROUDS Shrouds PIN-ON SIDE PINS & RETAINERS WELD-ON SIDE HEEL LIP HALF ARROW 53 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Shrouds Pin-on Side Shrouds VSM Vertical Shroud CAT 988 Side Shroud B c a a B VSM Weldment Vertical Shroud Pin & Retainer a FG D Pin for S-9J9600HX e CAT 988 Side Shroud e D D H Pin for S-1U0740 e CAT 988/992 Side Shroud c Pin-on Side Shrouds All measurements in millimetres A B C Product Part Number Weight External Length Hole Spacing Lip Gap CAT 988 Side Shroud S-9J9600HX 20kg 575 255 38 CAT 988/992 Side Shroud S-1U0740 25kg 608 293 55 VS450 Vertical Shroud S-VS450 20kg 770 343 – VS500 Vertical Shroud S-VS500 30kg 830 405 – VS550 Vertical Shroud S-VS550 39kg 910 435 – VSM100 Weldment S-VSM100WN 5kg 145 – 26 VSM150 Weldment S-VSM150WN 6kg 145 – 38 VSM175 Weldment S-VSM175WN 6kg 145 – 45 VSM200 Weldment S-VSM200WN 5kg 145 – 52 VSM250 Weldment S-VSM250WN 6kg 145 – 64 Pins & Retainers = Diameter PIN RETAINER D E F G Product Part Number Length Diameter Pin for S-9J9600HX TC-9J8442 86 29 Use CAT J350 Retainer Pin for S-1U0740 S-1U0739P 105 35 Use CAT J550 Retainer Pin for VS450 S-VSP2-SL 80 21 – – – Pin for VS500 & VS550 S-VSP3SL 104 21 – – – Retainer for VSP2 & VSP3 S-VSR3SL – – 20 40 33 54 V3–150715 Internal External H Depth 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ SHROUDS Shrouds Weld-on Heel & Side Shrouds BHS-style Heel Shroud ES36697-style Heel Shroud b Weld-on Side Shrouds c G D e F I a H Heel Shrouds k l J A B C D E F G Weight Exterior Length Side Thickness Interior Height Interior Depth Bottom Thickness Exterior Depth Exterior Height Product Part Number 12kg Heel Shroud S-BHS170 12kg 165 65 145 80 42 145 185 16kg Heel Shroud S-BHS150 16kg 150 60 150 125 60 185 210 10kg Heel Shroud S-ES6697-4 10kg 180 40 60 135 32 175 90 21kg Heel Shroud S-ES6697-2 21kg 185 50 95 195 55 246 145 Weld-on Side Shrouds H I J K L Product Part Number Weight Width Height Lip Gap Length Interior Depth Weld-on Side Shroud 20mm S-SLS20G 1.8kg 38 45 22 300 25 Weld-on Side Shroud 25mm S-SLS25G 2.5kg 44 50 26 300 26 Weld-on Side Shroud 32mm S-SLS32G 4.1kg 55 70 34 300 38 Weld-on Side Shroud 40mm S-SLS40G 5.5kg 65 80 44 300 43 All measurements in millimetres 55 V3–150715 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Shrouds Lip Shrouds & Half Arrow B k l J c I D e a H G F Weld-on Lip Shrouds A B C D E F Bottom Leg Thickness Bottom Leg Length Product Part Number Weight Bevel º Length Depth Height Land 100–120mm Lip Shroud S-WE6027 103kg 30 800 250 190 43 30 85 50–80mm Lip Shroud S-WE5966 58kg 25 800 200 130 26 25 70 Half Arrow G H I J K L Product Part Number Max Length Total Depth Base Base Lip Depth Thickness Height Height Half Arrow Bar Stock 19 x 200mm BS-HA22203-096 4250 200 130 20 15 35 Half Arrow Bar Stock 28 x 250mm BS-HA28254-120 4250 250 130 30 30 60 Half Arrow Bar Stock 40 x 250mm BS-HA40254-120 4250 250 130 40 30 70 All measurements in millimetres 56 V3–150715 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ DOMITE Domite CHOCKY BARS WEAR BARS SKID BARS WAFER STRIPS WEAR PLATES KNIVES WEAR BUTTONS DONUTS 57 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Domite Domite Domite 700HB Wear Products Domite is a combination of high chromium white iron metallurgially bonded to a mild steel backing plate. The white iron has a minimum hardness of 700 Brinell (63Rc) providing maximum abrasion resistance protection for your equipment. Domite is available in a wide range of shapes and sizes and can be used in combination to protect any impact and high abrasion areas. CHOCKY BARS WEAR PLATES For almost any application where abrasive wear is causing lost production through machine down time Easy to install, with the ability to change out worn sections only rather than replacing whole sheets or plates. WEAR BARS KNIVES Easy to install, with the ability to change out worn sections only rather than replacing whole sheets or plates. Offers sharp edges at the start of use and retain their edge sharpness and cutting efficiency longer than hard facing. SKID BARS WEAR BUTTONS & DONUTS Designed to protect and extend the life of mining and quarrying heavy duty buckets. Perfect alternative to expensive, labour intensive hard facing. Light weight and easy to handle, ideal for in situ repairs WAFER STRIPS Thin and lighter than chocky bars with superior wear and impact resistance than chrome clad plate and hard facing 58 V1–150715 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ DOMITE Domite Chocky Bars, Wear Bars B c c a B Chocky Bars a Add ‘N’ to part number for notched backing A B C Product Part Number Weight Length Width Height 25mm Chocky Bar D-CB25 0.9kg 240 25 25 40mm Chocky Bar D-CB40 1.4kg 240 40 25 50mm Chocky Bar D-CB50 1.9kg 240 50 25 65mm Chocky Bar D-CB65 2.4kg 240 65 25 100mm Chocky Bar D-CB100 4.3kg 240 100 25 A B C Wear Bars Product Part Number Weight Length Width Height Wear Bar 95 x 25x 30 D-DLP1059 0.6kg 95 25 30 Wear Bar 230 x 50 x 50 D-DLP125 4.5kg 230 50 50 Wear Bar 432 x 50 x 50 D-DLP201A 8.5kg 432 50 50 Wear Bar 190 x 50 x 30 D-DLP508 2.2kg 190 50 30 All measurements in millimetres 59 V1–150715 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Domite Skid Bars, Wafers, Wear Plates c a B c B a c B Skid Bars a A B C Product Part Number Weight Length Width Height Skid Bar — Rectangular D-SB406 7.3kg 302 101 34 Skid Bar — Rectangular D-SB409 3.7kg 154 101 34 A B C Wafer Strips Product Part Number Weight Length Width Height Wafer Strip 25mm D-WS25 0.6kg 240 25 12 Wafer Strip 40mm D-WS40 0.9kg 240 40 12 Wafer Strip 50mm D-WS50 1.2kg 240 50 12 A B C Wear Plates Product Part Number Weight Length Width Height Thin Wear Plate 200mm D-DLP2747 3.8kg 200 200 12 Thin Wear Plate 300mm D-DLP2748 8.5kg 300 300 12 Wear Plate — Rectangular D-DLP995 8.6kg 305 150 26 All measurements in millimetres 60 V1–150715 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ DOMITE Domite Knives, Buttons, Donuts e a c F c B D B Knives A B C Product Part Number Weight Length Width Height Arrow Head Knife 16mm D-DLP1065-16 0.9kg 203 16 50 Arrow Head Knife 19mm D-DLP1065-19 1.1kg 203 19 50 Arrow Head Knife 25mm D-DLP1065-25 1.5kg 203 25 50 Wear Buttons & Donuts D E F Product Part Number Weight Base Diameter Top Diameter Height Wear Button 60mm D-WB60 0.7kg 60 40 30 Wear Button 75mm D-WB75 1kg 75 55 30 Wear Button 90mm D-WB90 1.5kg 90 70 30 Donut 100/25mm Diameter D-DLP1921 0.7kg 100 50 25 Donut 100/70mm Diameter D-DLP1994 1kg 100 70 25 All measurements in millimetres 61 V1–150715 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Domite Grizzly Bars c a D B Grizzly Bars Type A: 150/50 A B C D Product Part Number Weight Length Starting Width End Width (Taper) Height Grizzly Bar 150/137.5 D-DLP2067 13.6kg 305 150 137.5 50 Grizzly Bar 137.5/125 D-DLP2068 12.5kg 305 137.5 125 50 Grizzly Bar 125/112.5 D-DLP2069 11.2kg 305 125 112.5 50 Grizzly Bar 112.5/100 D-DLP2070 10kg 305 112.5 100 50 Grizzly Bar 100/87.5 D-DLP2071 8.8kg 305 100 87.5 50 Grizzly Bar 87.5/75 D-DLP2072 7.5kg 305 87.5 75 50 Grizzly Bar 75/62.5 D-DLP2073 6.3kg 305 75 62.5 50 Grizzly Bar 62.5/50 D-DLP2074 5.1kg 305 62.5 50 50 A B C D Grizzly Bars Type B: 150/75 Product Part Number Weight Length Starting Width End Width (Taper) Height Grizzly Bar 150/141 D-DLP2075 13.8kg 305 150 141 50 Grizzly Bar 141/131 D-DLP2076 12.9kg 305 141 131 50 Grizzly Bar 131/122 D-DLP2077 11.9kg 305 131 122 50 Grizzly Bar 122/113 D-DLP2078 11.1kg 305 122 113 50 Grizzly Bar 113/103 D-DLP2079 10.1kg 305 113 103 50 Grizzly Bar 103/94 D-DLP2080 9.2kg 305 103 94 50 Grizzly Bar 94/84 D-DLP2081 8.3kg 305 94 84 50 Grizzly Bar 84/75 D-DLP2082 7.4kg 305 84 75 50 All measurements in millimetres 62 V1–150715 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ GRADER PARTS Grader Parts GRADER BLADES OVERLAYS END BITS BIT BOARDS SNOWPLOW BLADES SCARIFIER TIPS SCARIFIER SHANKS SCARIFIER WEDGES & PINS PLOW BOLT CHART 63 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Grader Grader Parts Our grader parts are made by Black Cat Blades — makers of high-quality aftermarket blades and castings. Our grader blades are avilable in either heat treated or carbon steel grades. Colour Logo HEAT TREATED GRADER BLADES Manufactured using high alloy ‘Boron’ steels which are then heat treated, quenched and tempered Hardness: 421–512 Brinell, 45–52 HRC CARBON STEEL GRADER BLADES Manufactured using high carbon alloy steels which are processed in ‘as rolled’ condition. Hardness: 250–320 Brinell, 25–34 HRC Our snow plow blades are available as tungsten carbide insert blades or the JOMA 6000 system. TUNGSTEN CARBIDE SNOW PLOW BLADES These carbide inserts are an extremely hard material with incredible wear life. The steel blade is primarily the “holder” for the carbide inserts which alone are too fragile to be used for plowing roadways. JOMA 6000 SNOW PLOW BLADES The JOMA 6000 blade is a unique design incorporating tungsten carbide inserts brazed into specially profiled steel segments which are then encased in rubber. The result is dramatically superior life when compared to existing carbide-insert blades. 64 V4–150723 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ GRADER PARTS BLADES Grader 4 – 6 ft Grader Blades c a B 5 foot Grader Blades A B Part Number Profile Steel Type Bevel Weight GB-7T1640-6 Curved High Carbon Double 24.4kg 11 6” 5/8” 5/8” GB-7D4508 Curved Heat Treated Double 24.3kg 11 6” 5/8” 5/8” 34.8kg 11 8” 5/8” 5/8” A B C GB-4T2967 Flat Heat Treated Double No. of Holes Width C 6 foot Grader Blades No. of Holes Width Thickness Bolt Size Part Number Profile Steel Type Bevel Weight Thickness Bolt Size GB-7T1633-6 Curved High Carbon Double 29.4kg 13 6" 5/8" 5/8" GB-7T1634-6 Curved High Carbon Double 50.5kg 13 8" 3/4" 5/8" GB-7T1634-6SBC Curved High Carbon Single 50.5kg 13 8" 3/4" 5/8" GB-7T1636-6 Curved High Carbon Double 41.7kg 13 8" 5/8" 5/8" GB-7T1636-SBC Curved High Carbon Single 41.7kg 8 8" 5/8" 5/8" GB-5D9553 Curved Heat Treated Double 29.2kg 13 6" 5/8" 5/8" GB-5D9558 Curved Heat Treated Double 50.1kg 13 8" 3/4" 5/8" GB-5D9562 Curved Heat Treated Double 41.5kg 13 8" 5/8" 5/8" Hole Spacing Note For all grader blades, holes at each end of the blade have 3” hole spacing. All other holes have 6” hole spacing. See illustration above for reference. Plow Bolts & Nuts = Diameter A Bolt = Stocked Part C 1 ¾” 2” 2 ¼” 2 ½” 2 ¾” Bolt Square 3” 3 ¼” 3 ½” a B D Nut Width 5/8” 15.9mm 23mm 3/4” 19.0mm 28mm c D Note: standard blades take 2 ¼” bolts 65 V4–150723 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Grader 7 – 8 ft Grader Blades 7 foot Grader Blades A No. of Holes Width B C Part Number Profile Steel Type Bevel Weight GB-7T1623-6 Curved High Carbon Double 58.8kg 15 8" 3/4" 5/8" GB-7T1623-6SBC Curved High Carbon Single 58.8kg 15 8" 3/4" 5/8" GB-7T1624-6 Curved High Carbon Double 48.7kg 15 8" 5/8" 3/4" GB-7T1624SB Curved High Carbon Single 48.7kg 9 8" 5/8" 3/4" GB-7T1625-6 Curved High Carbon Double 57.7kg 15 8" 3/4" 3/4" GB-7T1643-6 Curved High Carbon Double 48.7kg 15 8" 5/8" 5/8" GB-7T1643SB-6 Curved High Carbon Single 48.7kg 15 8" 5/8" 5/8" GB-4T2233 Curved Heat Treated Double 78.4kg 15 8" 1" 3/4" GB-4T2242 Curved Heat Treated Double 78.8kg 15 8" 1" 5/8" GB-5D9559 Curved Heat Treated Double 58.4kg 15 8" 3/4" 5/8" GB-5D9559SBCB Curved Heat Treated Single 58.4kg 15 8" 3/4" 5/8" GB-5D9561 Curved Heat Treated Double 48.4kg 15 8" 5/8" 5/8" GB-7D1158 Curved Heat Treated Double 48.1kg 15 8" 5/8" 3/4" GB-7D1577 Curved Heat Treated Double 58.2kg 15 8" 3/4" 3/4" A B C 8ft Grader Blades Part Number Profile Steel Type GB-7T1627-6 Curved High Carbon GB-8J4043CD (Centre Drilled) No. of Holes Width Thickness Bolt Size Bevel Weight Thickness Bolt Size Double 67.2kg 17 8" 3/4" 3/4" Curved Heat Treated Double 38.9kg 17 6" 5/8" 5/8" GB-5D9731 Curved Heat Treated Double 55.3kg 17 8" 5/8" 5/8" GB-5D9731CD-12 (Centre Drilled) Curved Heat Treated Double 55.3kg 17 8" 5/8" 5/8" GB-7D1949 Curved Heat Treated Double 66.5kg 17 8" 3/4" 3/4" GB-4T6511 Flat Heat Treated Double 112.5kg 17 10" 1" 3/4" Hole Spacing Note For all grader blades, holes at each end of the blade have 3” hole spacing. All other holes have 6” hole spacing. See illustration above for reference. 66 V4–150723 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ GRADER PARTS END BITS Grader Overlays, End Bits Overlay B End Bits c a Overlays A B C Product Part Number Weight No. of Holes Bolt Size Thickness Width Length Cat 112–140 Overlay GB-6D1904 22.5kg 8 5/8” 1/2” 9.25” 1.5ft Cat 12 –160 Overlay GB-6Y2805 12.2kg 8 3/4” 1/2” 9.25” 1.75ft Cat 16 Overlay GB-7D5193 16.8kg 8 5/8” 5/8” 9.25” 2ft Cat 14–16 Overlay GB-7D9999 13.1kg 8 3/4” 1/2” 9.25” 2ft John Deere 670–772 Overlay LH GB-JDT162468 12kg 7 5/8” 1/2” 8.5” 2ft John Deere 670–772 Overlay RH GB-JDT162469 12kg 7 5/8” 1/2” 8.5” 2ft John Deere 670–772 Overlay GB-T70927 17.2kg 10 5/8” 5/8” 9” 2ft A B C End Bits Product Part Number Weight No. of Holes Bolt Size Thickness Width Length Cat 16G RH End Bit GB-9D4880 9.7kg 4 3/4” 3/4” 6” 1.5ft Cat 16G LH End Bit GB-9D4881 9.7kg 4 3/4” 3/4” 6” 1.5ft Cat 14G RH End Bit GB-9J4405 8.1kg 4 3/4” 5/8” 6” 1.5ft Cat 14G LH End Bit GB-9J4406 8.1kg 4 3/4” 5/8” 6” 1.5ft Cat 12–160 End Bit GB-8E5529 7.6kg 5 3/4” 5/8” 6” 1.5ft Cat 12–143 End Bit GB-8E5531 7.9kg 5 5/8” 5/8” 6” 1.5ft 67 V4–150723 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Grader Bit Boards, Snowplow Blades Bit Board and Sharp Bit Carbide Insert Snowplow Blade JOMA Blade and Straps B c a Bit Boards A No. of Bits C Width Length Product Part Number Black Cat Bit Board 3ft GB-BC2000-36-34 24 3/4” 1” 6” 3ft Black Cat Bit Board 4ft GB-BC2000-48-34 32 3/4” 1” 6” 4ft Black Cat Sharp Grading Bit GB-C855LR – – – – – Snow Plow Blades Bolt Size Thickness B A B C Thickness Width Length Product Part Number Carbide Insert Snow Plow Blade GB-CIAB664844-A 3/4” 6” 4ft Carbide Insert Snow Plow Blade GB-CIAB666044-A 3/4” 6” 5ft 3ft JOMA Blade JOMA-6000X3 1” 6” 3ft 4ft JOMA Blade JOMA-6000X4 1” 6” 4ft 3ft JOMA Strap JOMA-STRAP3SEH – – 3ft 4ft JOMA Strap JOMA-STRAP4SEH – – 4ft 68 V4–150723 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ GRADER PARTS SCARIFIERS Grader Scarifier Tips, Shanks, Wedges B B Scarifier Shank a c Scarifier Tip c c a B B a a Scarifier Wedges Scarifier Pin Scarifier Tips A B C Product Part Number Weight Thickness Width Length Scarifier Tip GB-6Y5230 (Was 2D5572) 1.5kg 36 48 181 A B C Scarifier Shanks Product Part Number Weight Thickness Depth Length Scarifier Shank GB-9F5124 5.6kg 25 76 438 A B C Scarifier Pins & Wedges Product Part Number Weight Thickness Depth Length Scarifier Shank Pin GB-5K1459 0.4kg 17 51 114 Scarifier Shank Wedge GB-9F5124W 0.5kg 25 42 120 Komatsu Wedge GB-232-70-13142 1kg 25 35 190 All measurements in millimetres 69 V4–150723 0800 REAL STEEL (732 0800 REAL STEEL (732578) 578) REALSTEEL.CO.NZ REALSTEEL.CO.NZ Notes 70 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Notes 71 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Notes 72 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ Notes 73 0800 REAL STEEL (732 578) REALSTEEL.CO.NZ email sales@realsteel.co.nz phone 04 528 3655 free phone 0800 REAL STEEL 0800 732 578 fax 04 528 3654 mail PO Box 40160, Upper Hutt, Wellington 5140 location South Pacific Industrial Park 24 Railway Ave, Upper Hutt, Wellington 5018 www.realsteel.co.nz RealSteelLtd
Similar documents
Caterpillar® Replacement
www.BlackCatBlades.com Caterpillar® and other identities and/or trademarks referred to in this publication are the registered marks of the entities noted herein. The use of any trademarks of others...
More information