print

Transcription

print
PRINT
resources
Wall and floor solutions that
command attention.
Walls and floors are unique spaces that can broadcast your clients’ branding messages.
Office and retail wallspace can incorporate permanent or temporary graphics. Standard
cut or custom die cuts are optional on most materials.
Graphics are easy to apply to any smooth, clean surface. Below we’ve detailed our most
popular wall and floor materials and applications. There are many more materials available
than we can mention here. If your clients need a specific material, we can get it if we don’t
already stock it.
Pressure Sensitive Vinyl (PSV)
PSV is an adhesive-backed product that is easily applied to any
smooth, clean surface. It is available in white or clear.
There are also two levels of adhesion for
permanent or removable applications. PSV is also available in solid
colors for cut letter applications.
Adding a laminant provides the
durability needed for floor graphics.
In addition, Firehouse offers PSV
for carpets.
Lambda Photographic
Prints (mounted to rigid substrate)
With the addition of floor lamination, PSV
can take your clients’ branding messages
from the shelf to the aisle.
The beauty of true photographic
prints mounted to foamcore,
gatorboard, card stock, or acrylic
sheet. Can be mounted directly
to walls or attached via edge
grips or standoffs.
Wallpaper
A true printable wallpaper product
ideal for retail and office wall decor.
PRINT
resources
Framed Fabric
An ideal option for changeable
wall graphics, this system uses an
aluminum stretch frame to hold
seamless fabric taut for a rich,
non-reflective appearance.
These are perfect for photo
backdrops or TV set design.
Look for a future resource piece
that will dive deeper into fabrics.
Styrene
Ted Corman
Global Accounts Executive
If you have any questions
about Firehouse products,
please give me a call at
317-281-7855,
Polystyrene is Firehouse’s most popular substrate for indoor signage. Styrene is a rigid,
bright white board available in .015”, .020”, .030”, .040” and .060” thicknesses. Styrene is the
perfect material for most indoor POP applications. It can be wall mounted with hardware or
adhesive.
Expanded PVC Sheets
PVC sheets can be printed direct and wall mounted. They provide a durable and moisture
resistant option for long-term indoor signage. PVC can be printed on both sides, and it’s a
vailable in white or black and either 3mm or 6mm thicknesses.
send me an email or open a
chat session on our website.
Ted Corman
ted@fire-house.net • cell: 317-281-7855
Project Manager: Drew Pferrer
drew@fire-house.net • 317-524-6288
Global Headquarters: 2000 N. Illinois St. • Indianapolis, IN 46202 • USA
Europe: Keizersveld 19 • 5803 AM Venray • Netherlands