equipment carts for the entertainment industry

equipment carts for the
entertainment industry
INOVATIV CARTS ARE COMPACT IN
DESIGN, SUPER STRONG, BALANCED,
STABLE, DURABLE AND CUSTOMIZABLE.
AS A RESULT, OUR CUSTOMERS WILL
FIND A SIGNIFICANTLY BETTER
ALTERNATIVE TO THE EQUIPMENT CARTS
THEY ARE NOW USING.
Self-Locking Adjustable Shelving System
(SLAS)
Here at Inovativ we pride ourselves in
making the best equipment carts available.
Each cart is hand crafted to perfection,
utilizing the best materials to create
products that will last a lifetime. With our
design team and accomplished fabricators we
are able to tackle almost any project
presented to us. Our goal is to successfully
adapt to each customers needs by creating
a unique list of accessories. Each piece of
equipment from Inovativ is specifically
engineered and tailored for its purpose,
proving its ability to withstand the test
of time.
The SLAS (Self-Locking Adjustable Shelving)
system is a proprietary design created by
the Inovativ team. The ability to collapse,
extend, and adjust is only available with
this patent pending design. The SLAS system
allows for a smoother more compact
configuration that works amazingly well for
each design we build. With over 10” of
height adjustable shelving in 2” increments
you’re able to configure to each setup.
Using a self-lubricating rod end and 6061
aircraft tubing, our SLAS system allows for
perfect fit every time.
Heritage
Brakes and Wheel System
Although Inovativ is a relatively new
company, our heritage runs deep. In 2010,
Foes Racing’s top engineer along with the
help of a seasoned film professional,
re-imagined and redefined the antiquated
cart designs of the entertainment industry.
Foes Racing, designers of the toughest
downhill mountain bikes on the planet,
was born from one top engineer in the offroad racing world. For nearly the last
20 years, Foes Racing has set a precedent
for suspension, durability, and quality.
Using the same advanced craftsmanship and
strength that made Foes Racing into what
it is today, Inovativ is able to create
equipment carts far superior to anything
previously available.
After so many years of using step-type wheel
brakes, the designers at Inovativ were
determined to create a new standard for
equipment cart braking. With the
introduction of hydraulic disk brakes,
braking is now more efficient and powerful.
Our brakes utilize a single lever to actuate
two separate 1-piston calipers to clamp down
on two 4” stainless steel rotors. In every
sense, our brakes are so powerful they will
never be underpowered.
equipment carts for the
entertainment industry
INOVATIV PROVIDES THE FILM AND
PHOTOGRAPHY INDUSTRIES WITH MOBILE
EQUIPMENT CARTS SPECIFICALLY
DESIGNED AND CONSTRUCTED TO MEET
THEIR UNIQUE NEEDS AND OVERCOME
THE DEFICIENCIES OF EQUIPMENT CARTS
CURRENTLY SERVING THE MARKET.
The Inovativ Experience
In addition to unmatched braking, the
designers at Inovativ have created an
amazing wheel assembly more associated with
aircraft design. By using 6061 T6 aluminum
to mill each inch of our wheel housing and
then supplying each with 100% sealed wheel
bearings, our carts have simply unparalleled
agility. We re-designed and machined the
interior hubs of the wheel as well to ensure
balanced rotation giving improved rolling
resistance and wear.
01
The SCOUT
FEATURES
Hand crafted in the USA
Hand TIG welded
Parts machined from 6061 T6 aluminum
Inovativ SLAS patent pending system
The ability to travel with your
equipment cart has never been so
easy. The Scout, is an ultra
lightweight compact cart
specifically designed for the world
traveler in mind.
With multiple sizes available and
even the smallest utilizing
Inovativ’s unique SLAS system, the
Scout is an essential piece of
equipment for those in need of a
cart that works in almost any
scenario. Formed and hand welded
from 5052 aluminum, the Scout is an
extremely durable and stable
workspace that will be an
indispensable necessity for your
next expedition.
Folds to super sleek 7” deep
Comes in variety of colors and schemes (standard color black)
10 year limited warranty
30 day warranty on wheels and tires
TECHNICAL INFORMATION
Scout 31
Size: 31.5LX17.5WX7H
Weight: 43lbs Complete
Scout 37
Size: 37.5LX24WX7H
Weight: 67lbs Complete
Scout 42
Size: 42LX28WX7H
Weight: 77lbs Complete
02
03
The RANGER
FEATURES
Hand crafted in the USA
Hand TIG welded
Parts machined from 6061 T6 aluminum
Inovativ SLAS patent pending system
With nearly two years of R&D behind
it and our immense drive for perfection,
the Ranger might just be the best
utility cart to hit the market in
recent years.
We designed it from the ground up,
giving the Ranger a lightweight
aluminum foundation accompanied with
CNC’d wheels and accessories to shave
every ounce without compromising
durability. We then applied Inovativ’s
unique SLAS system giving the Ranger
over 10” of height adjustable shelving
further adapting its applications to
each user. Furthermore, with the
addition of hydraulic disk brakes and
the smoothness of our own 100% sealed
bearing wheel system, the Ranger is the
purest form of what an equipment cart
should be.
Hydraulic disk brakes
100% sealed bearing wheels
10 year limited warranty
30 day warranty on wheels and tires
TECHNICAL INFORMATION
dimensions
Collapsed:
31.5LX17.5WX7H
Assembled:
42H x 24W x 36L
Weight:
80lbs Complete
Weight Rating:
1000lbs
Accessory options
See Accessory Page
04
05
The ALPHA
echo
FEATURES
Hand crafted in the USA
Hand TIG welded
Parts machined from 6061 T6 aluminum
Inovativ SLAS patent pending system
Derived from within a dream of a
digital tech’s mind and where the dream
of Inovativ all began, the Echo answers
to the needs of the industries DIT.
The Echo eases the day to day grind of
on-set data management by not only
ergonomically appealing to the human
body but also allowing for a more
efficient location workflow. With a
rolled top shelf for less wrist fatigue
and adding a low profile drawer, the
Echo presents itself with a cleaner
organized working space. As with all
Inovativ carts, the Echo utilizes the
SLAS system which has more than 10” of
top shelf height adjustment, which in
this case allows for better standing
monitor height, keyboard and mouse
location, and most importantly
posture.
Hydraulic Disk Brakes
100% sealed bearing wheels
Folded top shelf lip
Cable management hole
Top shelf low-profile drawer
Lower 20” deep drawer
10 year limited warranty
30 day warranty on wheels and tires
TECHNICAL INFORMATION
dimensions
Collapsed:
19H x 24W x 36L
Assembled:
42H x 24W x 36L
Weight:
110lbs Complete
Weight Rating:
1000lbs
08
09
The alpha
FEATURES
Hand crafted in the USA
Hand TIG welded
Parts machined from 6061 T6 aluminum
Inovativ SLAS patent pending system
With 3.5” of independent 4-wheel
suspension, the Alpha is by far
Inovativ’s most advanced equipment
cart.
Utilizing an actual frame structure for
increased rigidity, the Alpha can
withstand most bumps and dips harmful
to camera lenses and computers. With
the ability to adjust the spring rate
via air, the Alpha can protect nearly
any type of gear you put on it. With the
additions of the SLAS system, sealed
bearing wheels, and hydraulic disk
brakes, maneuvering the Alpha is more
on the lines of an off-road truck than
an equipment cart.
Hydraulic disk brakes
100% sealed bearing wheels
4-wheel independent suspension
Independent aluminum frame structure
Adjustable compression and rebound
Adjustable spring rate via air
Suspension Lock-Out system
10 year limited warranty
30 day warranty on wheels and tires
TECHNICAL INFORMATION
dimensions
10
Collapsed:
21H x 24W x 36L
Weight:
85lbs
Assembled:
42H x 24W x 36L
Weight Rating:
800lbs
11
accessories
We at Inovativ are driven to design
products that are built better and
more efficient.
Because our carts are the foundation
of how we think a better equipment
cart system should be, we couldn’t
limit ourselves to just that.
Echo Top Shelf
Adjustable Middle Shelf
Quick Grips (Red)
Quick Grips (Black)
Accessory Cross Bar
Coming soon
Please go to
inovativcarts.com
for the most current
accessory list.
Rolled front lip allows for better hand
maneuverability and less wrist pain. Equipped
with a low profile center drawer for
production papers, pens, rulers, etc.
Material: 5052 Aluminum / Powder Coated Black
Dimensions: 24”W X 36L” X 4.5”H
Inovativ’s Middle Shelf can work on most of
our cart platforms and adds more space for
additional paperwork, camera cases, hard
drives, etc.(Not Shown (4) aluminum pole clamp brackets)
Material: 5052 Aluminum / Powder Coated Black
Dimensions: 24”W X 36”L X 1”H
Created with Inovativ’s unique pole clamp
design, the Quick Grip uses a 4 1/2” Lock-On
type grip and gets a full range of
configuration and height adjustment.
Material: 6061 T6 Aluminum / Anodized Black
Dimensions: 5”L X 2.5”W
Created with Inovativ’s unique pole clamp
design, the Quick Grip uses a 4 1/2” Lock-On
type grip and gets a full range of
configuration and height adjustment.
Material: 6061 T6 Aluminum / Anodized Black
Dimensions: 5”L X 2.5”W
This is Inovativ’s proprietary accessory
connection and allows for multiple
configurations and height adjustment. Machined
from T6 Aircraft Aluminum, its light weight,
strong, and rigid.
Material: 6061 T6 Aluminum / Anodized Gunmetal
Gray Dimensions: Multiple sizes available.
Locking Accessory Drawer
Accessory Trough
Inovativ Mitchell Mount Adapter
Inovativ Mitchell Mount
4-Post Outriggers
This locking bottom drawer is great for hard
drives, camera accessories, cleaning supplies
etc. Drawer slides on roller bearings with 100
lb. weight rating. Bolt on compatibility with
Echo and Ranger Carts.
Material: 5052 Aluminum / Powder Coated Black
Dimensions: 12”W X 20”L X 6”H
Mounts simply to edge of shelf. Perfect for
tools, snack or anything that you want to keep
off your working space. Comes in 10”,20” and
30” lengths.
Material: 5052 Aluminum / Powder Coated Black
Dimensions: 6”W X 10”L X 4”H / 6”W X 20”L X
4”H / 6”W X 30”L X 4”H
Machined from T6 Aircraft Aluminum, Inovativ’s
Mitchell Mount Adapter allows for use of
conventional style Mitchell Mounts but with
Inovativ’s proprietary Accessory Cross Bar.
Material: 6061 T6 Aluminum / Anodized Gunmetal
Gray Dimensions: 8” Reach
Machined from T6 Aircraft Aluminum, Inovativ’s
Mitchell Mount works directly with Inovativ’s
proprietary Accessory Cross Bar.
Material: 6061 T6 Aluminum / Anodized Blue &
Gunmetal Gray
Dimensions: 8” Reach
Inovativ Wheel System
Hydraulic Disk Brakes
Inovativ Cable Hangers
Compressed Air Bottle
With up to 12” of travel, the 4-Post
Outriggers are a must for those who require
a level working space. The 4-post Outriggers
have a quick disconnect design that allows
for fast removing.
Material: 6061 T6 Aluminum / Anodized Red &
Gunmetal Gray
Dimensions: available in 18” and 24” lengths
By committing ourselves to constantly
test and develop new products, we
promise to create an outstanding line
of accessories that make the daily
grind of the entertainment business a
little easier.
62 N. SIERRA MADRE BLVD.
PASADENA, CA 91107
Uses fully sealed precision bearings for
buttery smooth agility. All hubs and brackets
machined from 6061 T6 Aircraft Aluminum for
weight savings and anodized for durability.
Standard with foot style break lever.
Material: 6061 T6 Aluminum /
Anodized Gunmetal Gray
12
Complete with (2) single piston calipers
clamping down on 2 4” stainless steel rotors.
Quick Grip with full adjustable reach brake
handle and built-in parking brake. Only
compatible with The Inovativ Wheel System.
Rotor Material: Stainless Steel
Because keeping your cables organized is
critical, Inovativ has created (2) different
size cable hangers to work directly with the
Inovativ Accessory Cross Bar.
Material: 6061 T6 Aluminum / Anodized Black
Dimensions: 2 Sizes (3” and 6” Diameter)
20 OZ bottle packed full with Co2. With the
120psi regulator, this is liquid free
compressed air with pressure that will last.
Comes with cart holster.
Material: N/A
DIRECT LINE 626.381.9396
FAX LINE 626.872.1421
EMAIL INFO@INOVATIVCARTS.COM
ONLINE WWW.INOVATIVCARTS.COM
13
62 N. SIERRA MADRE BLVD.
PASADENA, CA 91107
DIRECT LINE 626.381.9396
FAX LINE 626.872.1421
EMAIL INFO@INOVATIVCARTS.COM
ONLINE WWW.INOVATIVCARTS.COM