Contents - Carpet Binding

Contents
Carpet Binder, Heavy Duty (TPB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Bobbinless Sample and Cove/Wall Base Binder (SB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Multi-Strip Cove/Wall Base Cutter (NC-250). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Carpet Cove/Wall Base Winder (CBW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Sisal/Berber Binder (81200-S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Mitered Cornering Carpet Binder (81200-S & 81200-SM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Ultimate Cornering Carpet Binder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Carpet Sergers – Heavy Duty (81200 Serger Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Ultimate Cornering Serger (81200-AIR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Portable Serger (81200-PS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Serge Carpets on Jobsite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Carpet Sergers – High Speed (NC-252 & NC-860) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Carpet Fringer – Heavy Duty (FTW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Tapestry Binder (PBTT & TAP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Millennium Portable Carpet Binder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Portable Carpet Binders (PBT & PBS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Portable Binders (PBS & PBT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Carver Heads – Carpet Design School (467-BS-01 & 467-BS-02) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Air Driven Carpet Carver (PDC-3A1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Custom Carving Package & Training by Master Carver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Portable Beveler (Beveler) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Carpet Shear – Master Shear (GMS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Hand Shears (Hand Shears) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Carpet Cutters (RSWS & RSWSH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Portable Carpet Cutters (PNUC & PC-2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Cordless Carpet Cutter/Butane Glue Gun (NC-360 & CB-900K) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Tufting Gun (TG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
N-C Detailer “Hot Knife” (DT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Electric Hot Knife (EHK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Hot Wheel Pattern Tracer (PT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Netting Machines (860-N, 81200-TF, 81200-NTP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Netting Machine (81200-NTPB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Cove/Wall Base Cutters (NC-150) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Portable Bag Closer (P-3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Rug Braider (320-BR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Fringing Machine (220-F) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Glue Guns (AGG Series & GG Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Attachments (CA - PBCA - AM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
What is Serging Tape? (PS-439 7/8 ST & NC-10 7/8 ST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Online Ordering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Specialty 563 Machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
All New Sergers (860-KTF, 860-TF, 860-TFT, 860-LHTF). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Charts and Supplies: Sewing Softener, Carver Lube, etc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
®
2
Carpet Binder and Fringer
Model
The Original One-Step, Heavy-Duty
Bobbinless Zigzag Double Lockstitch
TPB
Binds carpet, top and bottom, in one operation
Rear puller lift is located in front for easy accessibility.
Adjustable tension
bar fits tapes
3/4" to 1-1/4".
Separate extra-wide rear
Power puller (top-and
bottom-driven, with own
clutch off handwheel)
eliminates drive from main
shaft or from feed lever.
Binder guides
accurately
fold tape for
automatic
feed and binding.
Twin power front and
rear pullers evenly feed
carpets of any weight,
any size, and any type
backing, eliminating
stress and strain.
Compensating foot eliminates
carpet flagging during binding.
Convenient snap-out binder plate for easy
conversion and threading. Accommodates
required tape size in seconds.
Also adaptable for snap-in fringe guide.
N-C: The originator of bobbinless
one-step carpet binding
The TPB bobbinless self-oiling carpet binder
and fringer is widely used by many leading carpet
manufacturers for binding top and bottom in one
easy operation. It accommodates light or heavy
pile carpeting with any type backing including
jute, latex, rubber back or scrimp.
Features
The TPB is the N-C flagship machine. It is the most
capable, maintenance free unit in the world.
• 1-1/4" Tape Folder
• 3" Sisal Tape Folder
• Cove/Wall Base Attachment
• 7/8" Serge Tape Folder
PATENT #3320910
• Bobbinless, self-oiling
• 34 feet per minute
• Quick change attachments
Optional
Designed and
Manufactured
in the USA
TO ORDER COLOR CHARTS CALL US OR VISIT OUR WEBSITE AT WWW.N-CCARPET.COM
3
®
Model
SB
Bobbinless Sample and
Cove/Wall Base Binder
• Binds 60 feet/minute of carpet cove base
• Double lockstitch PATENT #3320910
• Model SB with cove/wall base attachment
• Feeds and binds lightweight or heavy pile
carpets (top and bottom) in one operation
The N-C Bobbinless Carpet Binders are the most
advanced machines available for binding carpet
samples. Traditionally a Sample Binder (SB), it is easily
converted to a Cove/Wall Base Binder. The customized
adjustable cove base width guide installs in seconds,
assuring an even feed. It can bind 3600 feet of carpet
cove base per hour (60 feet per minute) effortlessly.
Carpet Cove/Wall Base
Replacing wood and rubber cove
molding, matching strips of floor
carpet are bound and mounted as
a baseboard, giving a rich, lavish
look, especially in long corridors.
Features
• Pioneered and developed by N-C
• Special cornering binder
• Cove/Wall base adjustable guide
• Built especially for sample departments
• Automatic self-lubricating
• Extra-wide feeder for better pulling
• Binds 60 feet/minute of carpet cove base
• Snap-out binder for easy threading
Designed and
Manufactured
in the USA
Optional
Cove/Wall Base
Binder Attachment
Available for all
N-C Carpet Binders
Model SB
with folder
(NC-10CRE)
for binding
samples
Optional
• 1-1/4" Tape Folder
• Cove/Wall Base Attachment
• 7/8" Serge Tape Folder
ASK ABOUT AN AUTOMATED SB
®
4
“Cut and Wind Cove Base in Minutes”
Model
NC-250
Model
CBW
Multi-Strip Cove/Wall
Base Cutter
The NC-250 carpet cutter allows you to cut 6 four
inch strips in one pass. The blades are easily
adjustable and removable, thus allowing you to
generate strips at a maximum of 24 inches. Above
all else, your knees and back will thank you.
How the machine works:
This portable cutter is on wheels and rolls right
along your carpet roll. The NC250 is a walk behind
unit designed to pull itself through the carpet. As an
operator, you simply butt the carpet up against the
guide and turn on the blades. Once the blades catch
the carpet, it ensures exact cuts.
Carpet Cove/Wall
Base Winder
Pre-cut cove/wall base strip is locked into the wheel
hub. Large 30" lucite disks contain the cove/wall base
on the reel, which is motorized with a clutch to adjust
speed while winding the cove/wall base on the spool.
The wound-up reel is easily removed for future binding.
Designed and
Manufactured
in the USA
Or, pre-cut cove/wall base can be fed into a binding
machine. As it exits, it can be power-fed into the
winder, utilizing a separate foot pedal. The finished
bound reel of cove/wall base is easily removed, ready
to take on location for installation. The winder has
120-foot capacity within its 30" clear plastic disks.
LEADER OF THE INDUSTRY WITH TOP-OF-THE-LINE COVE/WALL BASE BINDERS AND SERGERS
5
®
Model
Sisal/Berber Binder
81200-S
The 81200-S brings new meaning to the phrase
“heavy duty.” It is the world’s most industrial carpet
binder. The 81200-S, A.K.A. “The Humvee,” was
developed to combat tough sisals, Berbers, etc. This
double puller, bobbinless machine is able to bind
any carpet effortlessly. If your workroom is flooded
by tough, thick-back carpets, the “S” is your best
option.
• Binds 7/8" tape up to 7" tape.
• Twin independent driven front and rear pullers.
• Definite non-slip feeding.
• Bobbinless Chainlock stitch.
• The “S” is the Army Issued Humvee of offroad
carpet binding.
Model
81200-SM
Mitered Cornering
Carpet Binder
• Same capabilities as the 81200-S shown above.
• The “SM” is a one-of-a-kind specialty machine
that miters carpet corners using N-C 3" tape
and many other popular sizes.
• An air table is required for proper operation of
this machine.
• Video shows simple demonstration on how to
miter corners.
• Performs all standard carpet binding applications
in addition to mitering function.
®
6
Ultimate Cornering
Carpet Binder*
Model
BAC
Designed for Special Applications
• Walking foot, chainlock stitch
• Designed to bind intricate turns and
radiuses with ease
• Bobbinless, self-oiling, chainlock stitch
• Standard 1-1/4" attachment
• Positive, non slip feeding
• Available automated for sample mats
• Model: SBA-binds & cuts automatically
• Ultimate cornering technology
* Ask about an automated BAC
Ideal for: Hallway/Stairway Runners, Aircraft, Marine,
Bathmat, Automats, RV, GSA, HB, rubber back, berbers.
Designed specifically for carpet binding applications that
encounter difficult inside corners, radiuses, and curves.
Initially designed for the automotive, aviation, marine, and
bathmat industries, the BAC is utilized by carpet workrooms worldwide.
If you encounter difficult carpet angles, the BAC is the
perfect remedy.
Auto, Boat, Bath and
Hallway Runner Mats
Model BAC used in
boat and car shops for
custom carpet trimming.
Designed and
Manufactured
in the USA
*ASK ABOUT AN AUTOMATED BAC
7
®
Model
Carpet Sergers
81200 Series
81200-TPWA/B
Heavy-Duty for Serging on
Any Heavyweight Carpet
Model 81200-TPWA/B
• Carpet Serger with Binder Attachment,
Twin Puller and Wrap Around Serge
• Extra Heavy-Duty Serger with
Independently-Driven Rear-Mounted
Twin Pullers for Wrap Around Serging
Over Binding on Any Weight Carpet
Specially designed to simultaneously apply a tape
underlay while wrapping around serging. Produces
a tight, clean serge, eliminating the need to bevel
or to serge-over two or three times. Carpet pile
will never come through your serge.
81200 (Regular) or
81200-WA (Wrap Around) Features
Features
• Completely covers up
to 3/8" serge edge
• Definite no-slip feeding
• Sturdy, heavy-duty
throat plate and feed
• Carpet pile will never come through your serge
• Two-thread machine
• Completely covers up to 3/8" serge edge in one pass
• Rear pullers, top and bottom-driven for maximum,
effortless non-slip feed
Model 81200-TP (Twin
Puller) Same features
as 81200
• Independent clutch system
• Clutch-driven direct from hand wheel; eliminates
stress and strain on main shaft and connections
Features
• Minimum needle
breakage, reduced
maintenance
• Easily replaceable
parts
• Large space between front and rear feed eliminates
shifting while carpet is being serged
• Minimizes operator fatigue; increases productivity,
producing a quality job
Special Opportunity: Update your present equipment
Designed and
Manufactured
in the USA
®
N-C will convert your 81200-K, 812-K or NC-820K to a
heavy-duty twin puller serger. (Due to special engineering,
conversions can be performed only in our factory.)
8
81200-AIR Series
Ultimate Cornering Sergers
Model
81200-AIR
Model
81200-AIR-RF
The 81200-AIR carpet serger is built on the lifelong lasting
81200 class machine. All new technology allows you to
serge those tough inside 90 degree angles, inside circles,
and acute angles effortlessly.
Specifically designed with the aircraft, automat, and
seacraft industries in mind, the AIR lends to all applications. If your workroom encounters difficult carpets to
serge, the new N-C Top Gun is your solution.
• Ultimate cornering technology
• Increased maneuverability up to 55%
• Set up on 2 or 3 threads
• Wrap around 3/8" Serged edge
• Single top and bottom feed
• Available with tape underlay so carpet pile never
busts through
• Minimal maintenance
• Designed for multiple daily shifts
• Ideal for: Aircraft, seacraft, bathmat, rugs, runners,
standard workroom, etc.
• Optional Tape Underlay Feature
The 81200-AIR-RF is designed for the standard carpet
serging workroom. If you serge area rugs for the home,
and are looking for a machine to tackle those tough corners, you’ve just found it.
Designed with a “close couple” rear puller to handle
dense, room sized carpets, the 81200-AIR-RF is built on
the lifelong lasting 81200 class machine. All new technology allows you to serge those tough inside 90 degree
angles, inside circles, and acute angles effortlessly.
• Complete with “Close Couple” Rear Clutch
Driven Puller
• Features same as 81200-AIR
• Optional: Tape Underlay Feature
Designed and
Manufactured
in the USA
• Ideal for all Serging Applications
9
®
Portable Serger
Model
81200-PS
Serge on the Jobsite
The all new N-C Portable Serger will serge any weight
carpet. Designed and manufactured entirely in the
USA, the NCPS comes equipped with our special tape
underlay feature. This tape feature ensures that carpet pile never busts through the serge. Thus providing
a perfect, long lasting finish.
With the N-C Portable Serger, now you can serge on
the jobsite and/or in house. This unit is the world’s
only heavy-duty portable serger. Patented.
The only portable serger that works on any
weight carpet:
• Machine pulls itself without operator help!
• Extra heavy-duty design
• Portable serger set up on large stabilizing
rubber casters
• Carpet pile will never bust through your serge
• Two thread wrap around 3/8" serge.
• Top & Bottom Drive with close couple puller
• Ideal for serging oriental rugs, runners, sisals,
berbers, etc.
• World renowned NC81200 mainframe
• Minimal maintenance
• Available 110 volt/60-cycle USA or 220 volt/
50-cycle overseas
Designed and
Manufactured
in the USA
®
10
Serge all Carpets on the Jobsite
Serge any weight carpet on your workroom floor or on the jobsite.
Finished product: The industry’s most gorgeous wrap around carpet serge.
Designed and
Manufactured
in the USA
11
®
Carpet Sergers
Model
NC-252
Two-Thread Carpet Serger
The ultimate in high-speed overedging machines
This high performer is ideal for overedging carpets
or rugs, blankets, jute or polypropylene bags, and
any extra heavy materials. It is a self-oiler with fully
automatic lubrication.
MODEL 252
Right Hand Model (shown)
MODEL 252L
Left Hand Model
High-Speed Carpet Sergers Especially Designed
For Medium to Lightweight Carpeting
Model
NC-860
Model 860 Serger
Features
• Long-wearing with extra-heavy throat plate and feed
• Better feeding with extra-heavy balance wheel
• Ball-bearing handling plate. Material rolls in without
pushing or pulling
• Accommodates most types of backed carpeting
• Automatic self-lubricating
• Optional rear puller
A powerful machine for serging all types of lightweight
to medium-weight carpeting. With an extra-heavy
balance wheel and ball-bearing handling plate,
carpets feed in effortlessly.
Model 860-B Butt King
Model 860 Trim King
Model 860 Left Handed
This machine includes the features
of Model 860, but is designed to temporarily join the butted edges of piece
goods for processing at bleaching,
dyeing and printing factories.
Includes all the features of Model
860, but includes trimming knives,
which permit the operator to feed,
trim and serge simultaneously. Used
for lightweight items such as bathroom mats and accessories.
The same machine as Model 860, but
designed to serge on the left side of
the carpet. Using both Models 860
and 860-LH, serging the right and left
sides of a carpet can be performed
simultaneously, cutting production
time in half.
®
12
Model
Apply Fringe in One Pass
FTW
Bobbinless Carpet Fringer
• Double lockstitch one-pass fringe and tape.
• Applies pre-made fringe in one operation.
The N-C Fringer cuts operation time and cost in half.
You produce a durable, quality job while saving labor,
time and money.
A precision-engineered compound feed eliminates
“pucker” or “saucer” effects. Two needles and two
loopers guarantee maximum fringing security. The
folder guide virtually eliminates operator handling,
and a convenient swing-away guide makes finishing
effortless.
Features
• Effortless positive feeding
• Fringe guide rack
needle to penetrate
carpet backing
• Fringe folder guide
• Automatic oiler
• Swing-away guide for
• Two needles/two loopers
easy finishing
Designed and
Manufactured
in the USA
• Specially designed
• Automatic feed guide for
• Compound feed
finishing carpet underside
with 9/16" tape
13
®
Portable Tapestry Binder
Model
PBTT
The N-C Portable Tapestry Machine is the only true
double puller, industrialized to handle dense carpets.
The PBTT applies wide borders with a hidden stitch
(blind stitch).
Tapestry edges have become prevalent in our industry.
Demand for these gorgeous 3-6" tapestry borders has
grown dramatically. Now you can perform tapestry jobs
onsite.
• Applies up to a 6" border
• Independently driven double pullers
• Can perform mitered corners. Video available
• Can utilize any tapestry style tape: leather, cotton,
vinyl, etc.
Model
TAP
Tapestry Binder
Sews Up to 8" Tapestry Border
If you’re looking for the perfect machine to apply a
variety of wide borders, you’ve just found it. The flagship N-C Tapestry machine is capable of applying an
8", blind stitch tapestry border. The TAP is bobbinless,
self oiling, and requires minimal maintenance.
This unit allows you to perform hand mitered corners
to your specifications (hand mitered corner video available).
• Bobbinless, Self Oiling
• Applies to an 8" border
• Complete with table model work station
• Extra Heavy-Duty Design
• Can utilize any tapestry style tape: leather, cotton,
Designed and
Manufactured
in the USA
®
vinyl, etc.
• Can mitre corners with this unit
14
Model
MILLENNIUM
Bobbinless Portable
Carpet Binder
So Advanced it Makes Other
Portables Obsolete
The Millennium is now the industry’s only machine
with 4x4 technology. Powered by 3 independently
clutch-driven pullers and front feeder, this portable
binder rivals the industrial strength of our table model
units.
The Millennium is three times faster than conventional
bobbin type portables. So throw away your bobbins and
bind 1000s of feet without changing thread. It is
designed to dramatically increase your speed while
decreasing your maintenance.
Patented.
Features
• 4 wheel drive, top and bottom feed (3 clutch-driven
pullers and 1 bottom feeder)
• Bobbinless, Twin Puller, Chainlock Stitch
• Uses 2 large spools of thread (throw away your bobbins)
4x4 Design:
3 Clutch-Driven
Feed Wheels +
Feeder
• Push Button Oiling System
• Accommodates Serging Tape, 7/8", 1-1/4", and
3" binding
• Generates 23' per minute (1380' per hour) on Cove Base
• Binds any ROOM-SIZE carpet at a rate of 16'
per minute
• Handwheel makes turning corners effortless
• Take Up Assembly (helps eliminate missed stitches)
Optional:
Custom made
wood protective
case
• Extra Long Stabilizing Base gives you that
“Cadillac” feel
• Instructional/maintenance Video
15
®
Portable Carpet Binders
Series
PBT & PBS
Feed and bind top and bottom in one operation
Compact; completely self contained—weighs only
24 pounds
A completely portable carpet binder designed to perform a
full-size job. N-C portable binders include built-in motor,
roll-about wheels, and carrying case. They are lightweight
for easy transporting. The heavy-duty motor supplies the
power required to do a quality binding job on all types of
carpets. Built-in casters are included for ease of operation.
PBT and PBS Features
• One-pass operation
• Binds all carpets and rugs
• Zigzag Lockstitch
Rug Glide Attachment for
PBS & PBT Binding Machines
• Binding holder accommodates full roll of binding tape
Part No. S28 (Optional)
• Roll of binding tape fits against machine arm, eliminat-
Reduces drag; stabilizes feed. Attaches easily
to base of binder.
ing any extended obstruction when binding near wall
• Sews over four yards per minute
• A centrally located work handle maneuvers easily
Adjustable Cove/Wall Base Guide Attachment
Part No. PBCA (Optional)
Designed exclusively for N-C Portable binders.
Attaches in seconds.
• Pre-set stitch regulator and zigzag width eliminate prob-
ability of breaking needles and upsetting feed timing
• Balance trigger handle switch with lock
• Built-in light/switch
• Fully enclosed heavy-duty motor
• Available in either 110/115V 60-cycle or 220/230V
50-cycle
Optional
• Fringe Guide (PBFG)
• Rug Glide (S28)
• 1-1/4" Folder
Comes complete
with convenient
carrying case
®
• Cove Base Attachment (PBCA)
• 3" Sisal Folder (PS439S) (factory conversion only)
• 7/8" Serge Tape Folder (PS439 7/8 ST)
16
Model
PBS
Portable Binder
with Single Puller
Feeds top and bottom in one operation
Take it anywhere…..
Just plug in and use!
Model
Portable Binder
with Twin Puller
PBT
N-C Original!
After years of extensive experimentation, N-C has
engineered an exciting breakthrough—a twin feed
portable carpet binder that fully meets the demands
of carpet workrooms and installers.
Front- and rear-driven twin pullers, each with its own
clutch, eliminate back feed and lost forward motion.
The secondary puller prevents the machine from
pulling away from the rug.
Many more innovative engineering advantages are
built into this N-C twin puller portable carpet binder.
Designed and
Manufactured
in the USA
17
®
Carver Heads
Model
467-BS-01
Suction tube on bottom for clear visibility
while carving away from operator
Features
• N-C Comfort Grip Design
• Lightweight carving heads
• Special rug-carving blade; easily removable for
return to N-C for sharpening
• Heavier rocker arm
• Pivot pin and drive cable
Model
467-BS-02
Suction tube on top for clear visibility while carving
towards operator
Complete Rug Carver Unit
• Vacuum tank and hose
• Motor with variable speed control on swivel base
• Drive cable
• Electric outlet
• Swivel Carver head
• Available in 110/115V 60-cycle or 220/230V 50-cycle
Shown with 467-BS-01
Clipper Head
• Replacement blades for all carvers
CARPET DESIGN SCHOOL
A new dimension for carpet workrooms
CUSTOM CARPET CARVING, IN-LAYS AND
SCULPTING TRAINING
Attain knowledge in becoming a specialist in
custom carpet designing. In as little as three days of
schooling, you will learn pattern making and methods;
fabrication of carpet; trade secrets of carving and
sculpting; rebacking with different materials, binding
methods; equipment purchasing and maintenance;
marketing of your talents and pricing your work.
Designed and
Manufactured
in the USA
®
18
N-C Air-Driven
Carpet Carver
No Wires
No Cable to Break
No Brushes to Wear Out
No Tank to Carry
Model
PDC-3A1
Patented
• N-C Comfort Grip Design
• Controlled air flow keeps unit and
blades cool, prolonging blade life
• Blades change easily in seconds
• Safety grip switch shuts off unit
automatically
• Super-quiet operation
• Weighs only 1-1/2 lbs. with blade
• Built in air exhaust
The Ultimate Carpet Carver for Sculpting and Inlays
Designed to operate multiple daily shifts, the PDC-3A1 is utilized by large mills & individual carvers looking for
maintenance free production. This unit is totally enclosed with a built-in power unit and ball bearing direct drive
for low air pressure operation.
It broadens the capabilities in the art of sculpting designs in carpets as well as creating decorative border patterns. The air-cooled, lightweight powerhead is easier to use; more maneuverable; more responsive to intricate
manipulations—the ultimate finishing tool for inlaid carpet creations.
The PDC-3A1 carpet carver is air-driven, requiring only 60 PSI to operate. It has no cable, no exterior motor, no
wires, and no brushes, making it virtually maintenance-free.
Carver Base-Relief Plate
Mini Kit
Used with air-driven or electric
carvers. Locks in carver at any angle
or height for controlled relief carving.
In-line lubricator, water trap filter and
air gauge regulator.
Part No. CB
To drive N-C air carver, use minimum 60 PSI
Gauge reading 0-160 PSI
Designed and
Manufactured
in the USA
Part No. KIT
19
®
Standard Custom Carving Package and
One-on-One Training Performed by Master Carver
“Your creativity is your best tool”
Call for start-up custom carving package
A. Carver (Elec./Air)
B. Beveler
D. Portable Carpet Binder
C. Glue Gun
E. Detailer
CONTACT US FOR SCHOOLING DETAILS • 1-800-526-1184
®
20
Portable Beveler
Model
Shear those thick piled carpets
on exact height and angle
This machine, designed for beveling carpet edges, is a
real time-saver for both manufacturers and retailers.
BEVELER
Bevels Edges
for Custom
Inlays or Borders
• Bevels Edges
for Binding
• Will Cut 30° to
90° Angles
•
Made of lightweight aluminum, the N-C Beveler is
mounted on needle-bearing rollers assuring easy
handling. So simple to operate that an inexperienced
person could bevel a room-size rug in 5 or 10 minutes.
Features
• Different bevel angles may be obtained by loosening
the two knobs at the base of the machine and moving
the cutting head to a desired position. Will cut 30°
to 90° angles.
Designed and
Manufactured
in the USA
• Fine tool steel knives are easily removable for sharpening
• 1/2 HP engine
• Available in either 110V/115V 60-cycle or 220/230V 50-cycle
• Optional extra: quiet, long life vacuum
Model
GMS
Top-of-the-line Carpet Shear
“Master Shear”
Made in Germany, Master Finish is infinitely adjustable to accommodate any carpet pile. Gives a “like new” look to carpets
rendered uneven and unsightly through wear, shampooing, or
movement of furnishings. Electrically-driven with either 110V or
220V single-phase alternating current motor. Shearing depth is
easily adjusted to any desired height. Weighs just 22 lbs. (11 kg).
Portable Hand Shears
The N-C Portable Hand Shear trims carpet borders to any
desired width for fringing. Includes powerful, cool-running
motor, extra long-lift brushes, and easily-cleaned filter
screen. Available in either 110V or 220V.
EW311
HEAVY DUTY Model EW311
Rough cut used for beveling
Model
HAND SHEARS
510
LIGHTWEIGHT Model 510
Fine cut is used for shearing and finishing
Model 510: Fixed speed
21
®
Hand Model Carpet Cutter
Model
RSWS
This carpet cutter has an ultra slim-line standard for effortless cutting. Only N-C’s Ultra Slim-Line Carpet Cutter permits
the blade to glide through any weight carpet, with any type
backing (especially high-density rubber), smoothly and with
little resistance.
Features
• 3/4 HP motor
• Directly wired with twist-lock plug, eliminating constant
terminal pin breakage
• Eliminates thick rug resistance
• No bucking. Operator makes straight, accurate cuts
through heavy material
• 6" blade for longer-lasting blade life
• Sealed motor bearings for virtually grease-free operation
• All controls within fingertip reach
Designed and
Manufactured
in the USA
Model
• Available in either 110/115V 60-cycle or 220/230V
50-cycle
RSWSH
Upright Carpet Cutter
The Ultra Slim-Line
This upright 6" floor cutter contains all the
features of the RSWS with the convenience
of a long handle with finger tip switch.
Set up a track and cut any carpet with ease
and precision cuts.
Designed and
Manufactured
in the USA
®
22
Portable Carpet Cutters
Model
PNUC
Pneumatic Air Cutter
Most powerful hand held cutter in the world.
Pneumatic, heavy-duty, portable cutter just slices
through any carpet and backing type. The cutter
weighs a mere 2-1/2 pounds, thus minimizing operator fatigue.
• Built in muffler assures quiet operation
• Operates 100 PSI
• Maintains RPM without slowing
Designed and
Manufactured
in the USA
Electric Driven
Carpet Cutter
N-C’s compact cutter weighs less than 5 pounds, and cuts
any weight carpet with all types of backing or padding. Cuts
straight or slight curves quickly and accurately, saving time,
money and labor.
Model
PC-2
Its ease of handling makes this a perfect tool in the mill or for
on-the-job installation.
The Portable Carpet Cutter is equipped with extra blade,
sharpening stone, lint brush, and tube of lubricant.
Features
• Die-cast motor housing
• Finger-grip die-cast handle
• Lightweight (approx. 5 pounds)
• Heavy-duty motor
• Automatic sharpener
• Fingertip on/off switch
• Adjustable pile guide
• Available in either 110/115V 60-cycle or 220/230V 50-cycle
23
®
Cut and Glue YOUR Carpets Cordless!
Model
NC-360
Cordless Carpet Cutter
Complete with heavy duty NiCad battery
pack and temperature controlled quick
charge charger
NC-360-01
10 sided round knife 60mm (2-5/16") dia
NC-360-02
Counter knife (carbide tipped) assembly
NC-360-03
NiCad battery pack (9.6 VDC)
NC-360-04-1 Battery charger 115V
NC-360-04-2 Battery charger 230V
NC-360-05
Model
CB-900K
Sharpening stone
Cordless Butane
Glue Gun
• Complete with carrying case,
4 applicator tips and glue sticks
• Take everywhere with your Portable
Binder and Cordless Cutter
• Wide Tip and Glue Available
®
24
Tufting Gun
Precision, high-speed, lightweight, versatile, and maneuverable are just a few words to describe this engineering marvel which virtually out-dates all other tufting machines.
Model
TG
Model
DT
Model
PT & EHK
Hand-tufted carpets can be produced at unbelievable
speeds with utmost accuracy. Limited only by imagination,
carpets can be created in various heights, in either cut or
loop pile of light, heavy, or unconventional yarns.
With complete maneuverability, tufting can be in any direction including working in line, twisted movements, or circular work of 360° without removing the cut from the canvas.
Features
• Lightweight, including motor
• Self-sharpening cutting blade
• Up to 2050 stitches/rpm
• Changes from cut to loop pile in seconds
• Disassembles and reassembles in minutes
• Complete maneuverability
• Pile heights: Cut: 16-40mm Loop: 8-40mm
• Available in 110V 60-cycle or 220V/230V 50-cycle
N-C Detailer “Hot Knife”
Used primarily for custom inlays, the detailer literally glides
through the synthetic backing of most carpets as the “hot
knife” cuts intricate patterns and designs. Also used to
repair carpet by “fusing” seams together.
• Comes with razor tip F
• Optional Tips PS, E, H
• Available in 110V 60-cycle or 220V/230V 50-cycle
Designed and
Manufactured
in the USA
Electric Hot Knife
Hot Wheel Pattern Tracer
For intricate
design-cutting
on syntheticbacked
carpets
For perforating
patterns and
designs on
durable
Tyvek sheet
for Custom
Carpeting
25
®
New N-C Netting Machines
Model
81200-NTP
All New Ultra Heavy Duty
Netting/Rope Machine Serger
Features
• Netting Sewn Parallel or Diagonal to the edge.
Maximum S.P.I. is 2.5" (10mm)
• Stitches 1,200 per minute
• No machine in the world has its rope capacity, does
up to 1-1/16" (26mm) diameter rope
• Twin Puller System with Independently Driven Clutch
• No Slippage
• Minimum Maintenance
Model
Designed and
Manufactured
in the USA
81200-TF
All New Heavy Duty Netting Serger
Features
• Unique Top Roller Feed for Serging all Ends
• Made Specifically for Netting Industry
• Variable Speed Feed Roller System
• No Slippage
• Minimum Maintenance
Model
860-N
Designed and
Manufactured
in the USA
All New High Speed Serger for
Light to Medium Weight Netting
Features
• Automatic Self-Oiler
• Made Specifically for Netting Industry
• High Speed Top & Bottom Feed
• Variable Speed Feed System
• No Slippage
• Minimum Maintenance
®
26
Designed and
Manufactured
in the USA
Model
81200-NTPB
The 81200-NTPB is capable of binding around any
netting while inserting rope at the same time.
Needless to say, it is also able to bind netting that
already has the rope attached.
N-C offers a single needle chainlock with top and
bottom rear puller including a close couple top roller
feed puller with the ability to utilize binding up to
7" in diameter.
N-C offers the most powerful quality built heavyduty netting binder in the world.
Designed and
Manufactured
in the USA
Model
NC-150
Carpet Cove/Wall Base
Cutters
Single-Strip Cove/Base Cutters
This single high-speed cove base cutter is ideal for
on-the-job installations. High speed cutting capacity
produces accurate strip widths (up to 6") ready for
binding. Circular self-sharpening cutting blade operates on 110 or 220 Volts. Completely portable with
a carrying case makes it the ideal on-the-job
cove/wall base cutter.
Carpet cove/wall base is the popular choice to
replace vinyl and wood cove/wall base. Often leftover strips of carpet can be used to cut into 4" to
6" cove-size strips. Using an N-C binder to finish off
the visible raw edge, this type of cove/wall base
complements wall-to-wall installations.
WEIGHT: 38 LBS
27
®
Portable Bag Closer
Model
P-3
One thread, one needle, one looper; chain stitch
The N-C Portable Bag Closer is used primarily in carpet
finishing departments to seam jute and poly-back; also
ideal for seaming very low pile material.
Features
• Weighs only 14 lbs.
• Compact; stores anywhere
• Sturdy construction
• Simple to use
• V-Belt drive
• Quiet operation
• Available in 110V/115V 60-cycle, or 220V/230V 50-cycle
Model
320-BR
Rug Braider
One thread, one needle, one looper; chain stitch
The N-C 320-BR is our heavy-duty zigzag lockstitch
machine engineered for braiding rugs of any size. Not a
conversion of an old machine, but brand new, customized
especially for braiding rugs.
The 320-BR offers a wide selection of presser-foot sizes.
It accommodates different size ropes, and uses prewound
Style F bobbins.
Features
• Zigzag lockstitch
Model
220-F
• Pre-wound “F” bobbins with 111 yards of thread
• Available in 110V 60-cycle, 220V/230V 50-cycle
• Specially designed needle for easier penetration
Fringing Machine
High-speed operation makes fringing from a single spool of yarn,
sews it on, and trims to size, all in one operation. This sophisticated equipment creates fringing in lengths 1-1/2" to 5" (4cm to
12cm), 13 to 35 fringes per 4" (10cm) at up to 1000 s.p.m.
Designed for fringing on woven or non-woven materials—tufted
carpets, praying mats, table cloths, bed covers, shawls, blankets,
sunblinds, etc. Fully automatic lubrication.
• Available in 110V 60-cycle or 220V/230C 50-cycle
• Spins Authentic Fringe
®
28
Glue Guns
Series
AGG
(Wide Tip Included)
Air-Driven Glue Gun
For gluing and seaming large areas or for continuous
usage, the glue gun is easy to load and keep operative. The air-driven squeeze trigger eases application
by eliminating operator fatigue, allowing tasks to be
performed faster and more efficiently. Equipped with
an insert stand; operates on 120V. Air compressor
requirements: Minimum 50 PSI; maximum 100 PSI.
Series
When ordering, please specify:
Model AGG/Plugs (Air-driven, uses glue plugs)
Model GG/Plugs (Electric, uses glue plugs)
GG
Electric Glue Gun
Accessories
Used to apply hot melt glue for repair and seaming all
types of carpet. Equipped with holder stand.
GLUE PLUGS & STICKS
For seaming and glue guns
Plugs: PART NO S30
(22 pounds per carton)
Sticks: PART NO S30L
(22 pounds per carton)
SCRIM
Specially formulated polymesh tacky seaming tape in
300' rolls. Available in 1", 2"
4", 6" and 12" widths. Larger
sizes on special order.
When ordering, please specify:
Model AGG/Sticks (Air-driven, uses glue sticks)
Model GG/Sticks (Electric, uses glue sticks)
Designed and
Manufactured
in the USA
GLUE GUN WIDE TIP ACCESSORIES
Used to apply hot melt glue
in wide areas
Part No. WT
ICE PICKS
To position carpet while
seaming or cutting
Part No. ICE
CARPET CLAMPS
Various Applications
Part No. CC
29
®
ATTACHMENTS
NC-10 REPNS/NC-10 CRENS
N-C’s engineering department has developed a
new style poly-binding attachment. These specially
designed attachments eliminate puckering or wavering. These attachments are designed for all high
speed industrial binding machines in sample houses,
carpet workrooms or custom area rug departments.
3" Sisal Attachment
Universal 3" sisal attachments that accommodate
polyester and cotton tape. These 3" sisal binding
attachments are available in raw edge or clean finish.
All N-C equipment has the ability to accommodate the
3" sisal attachments. Simply specify which model
binder you have.
CA
PBCA
Adjustable cove base (wall base) attachments for all
industrial binding machines adjustable from 3 to 6".
Adjustable cove base attachment for all portables with
bobbins.
AM
Designed and
Manufactured
in the USA
®
Adjustable Cove Base
Attachment (4-6") for
New Bobbinless N-C
Millennium Portable
30
SERGING TAPE
PS-439 7/8 ST
For all Portable Binders
NC-10 7/8 ST
For all Table Model Binders
Designed and
Manufactured
in the USA
What is Serging Tape?
Serging tape duplicates the look of wrap-around serging. It can be applied with any carpet binding
machine. It is made out of 100% cotton and looks gorgeous. Merely purchase a folder for your binder
and you are ready to serge.
We carry 84 colors of serging tape. Simply ask for our color chart or look it up on our website at
www.n-ccarpet.com.
When it comes to quality and innovation in carpet binding, serging,
fringing, cutting, beveling or carving machinery, there is only one:
N-C Carpet Binding and Equipment Corp.
31
®
“World’s Largest Online Store
for Carpet Binding Tapes,
Serging Yarns, & Fringes”
www.n-ccarpet.com
• Easy online ordering (Paypal or House Acct.)
• View all color charts online
• All N-C Machinery described in detail
• Don’t miss out on the ALL-NEW “N-C Portable Serger”
150 Polyester Binding Colors
Available in 3/4" & 1-1/4"
59 3" Sisal Cotton & Polyester
Colors Available
126 Serging Yarn Colors &
84 Serging Tape Colors Available
47 Cotton Binding Colors Available
in 3/4" & 1-1/4"
29 Oriental & Synthetic Fringe
Colors & Styles
Designed and
Manufactured
in the USA
N-C MACHINE REPAIR SERVICE: WE REPAIR ALL N-C UNITS WITHIN 24 HOURS.
MAKE SURE TO SHIP YOUR MACHINES WELL PACKED.
®
32
Specialty 563 Machines
Model
563-N
MODEL 563-N
Rubber Nosing Machine
This portable unit applies rubber nosing to any
application. It can be brought on the jobsite or
utilized in house.
Model
563-B
MODEL 563-B
Heavy-duty lockstitch, large bobbin hook, compound feed, reverse backtacking lever. Binds
carpet top and bottom in one operation. Uses
1-1/4" binder. Special binders made to order.
Available without binder.
Ideal for auto mats, carpet samples, canvas and
leather items.
Model
563-T
MODEL 563-T WITH GUIDE
FOR TAPESTRY BINDING
All the features of the 563-B, but replaces the
carpet binder with an adjustable tapestry binding guide.
For details on tapestry binding, refer to Model
TAP on page 14.
33
®
“All New” N-C Sergers
Model
(patents pending)
860-KTF
High speed self oiling top roller feed serger with trim knives.
Especially effective on all rubber-backed mats and carpets. This unit
has its own independent variable speed clutch system and eliminates
all slippage, minimizing maintenance.
• Commercial, medium, light weight carpet, rubber back
• Available in wrap-around or regular stitch.
Model
860-TF
860-KTF
High speed self oiling serger with upper roller feed. Effective on all
medium to light weight carpets. This unit has its own independent
variable speed clutch system and eliminates all slippage, minimizing
maintenance.
• Commercial, medium, light weight carpet, rubber back
• Available in wrap-around or regular stitch.
860-TF
Model
860-TFT
High speed, self oiling serger with upper roller feed and tape attachment. This unit applies binding before serging. This results in a perfect
finish by eliminating all carpet pile from view.
• Commercial, medium, light weight carpet, rubber back
• Available in wrap-around or regular stitch.
860-TFT
Model
860-LHTF
Left handed high speed, self oiling serger with upper roller feed. This
unit has its own independent variable speed clutch system and eliminates all slippage, minimizing maintenance.
• Available in regular stitch only.
860-LHTF
®
34
Supplies & Equipment Available from N-C
Sample Charts
Carpet Fringe—Regular
Colorfast Poly Tape
Cotton Carpet Binding
• Serging thread
• Knotted acrylic 4" fringe
• “A” and “F” pre-wound bobbins
• 8 oz spools mono-thread for Portable
Binder
• 52 oz mono-thread—approx. 1-1/2 lbs
canister
• 24/4 thread for looper
SEWING SOFTENER
• Bonded nylon thread
Pints . . . Part No. S13
Gallons. . Part No. S35
• 12/4 thread for looper
• 16/4 thread for looper
• BT-207 wrap-around thread
• N-C sewing softener
• Carver blade lubricant
• 3/4", 7/8" 1-1/4", and 3" binding tapes
in polyester or cotton
• Silicone spray
CARVER LUBE
• Industrial machine oil
Aerosol . . . . . Part No. S14
• Full line of replacement parts for N-C
Pints Cans. . . Part No. S14A
and other make binders and sergers
• Wiss carpet shears
• Tweezers: Curved and straight
• Silicone: pints, quarts, gallons
QUIK STIX
• Needles: all types
SPRAY ADHESIVE
• 10" and 12" carpet shears
Spray adhesive
• RS-1 napping shears
for carpet repairs,
• Sisal tapes:
secondary backing and inlays.
3" cotton tapes
No. QS100
Part
3" polyester tapes
ORIENTAL FRINGE
Sisal Tape
Serging Thread & Tape
We currently offer 12 styles/colors to
select from. Our goal is to provide the
finest oriental style fringe at affordable
pricing. Call toll free to order a free color
chart. In addition, matching colored serging yarn is also available. This comes in
handy when attempting to serge and
fringe complete rugs.
Designed and
Manufactured
in the USA
35
®
Company History & Value Statement
In Our Fourth Generation
Family owned and operated for more than 60 years, N-C Carpet Binding & Equipment Corp. and
Newark Caplan Sewing Machine have pioneered, designed, and engineered numerous innovations
utilizing industrial sewing machines.
Family members A. Joseph Caplan and Maliad Maher started the business after service in the military. Maher became the expert in setting up entire garment factories with equipment required to
manufacture clothing.
Caplan branched out in the development of special sewing machines for the carpet industry. He is
credited with developing the first bobbinless, zig-zag, double chainlock stitch machine to tape and
bind carpets, top and bottom, in one operation.
Mel Maher and Mark Caplan have spearheaded the development of the industry’s bobbinless
portable carpet binder and the all new portable serger. In addition, their efforts have led N-C into
developing custom machinery for dozens of industries.
The most recent addition to management is Mel’s son Mal Maher. Mal recently received an MBA in
PMS 641
international management and marketing. He directs international accounts, website design, and
marketing efforts.
Value Statement
Here at N-C we take pride in being the industry innovator. Since 1959, we have pioneered the flooring trade with new equipment. We strive to continue developing new, innovative equipment. N-C
differentiates itself from others by designing and manufacturing our own equipment. While others
duplicate, we originate. We welcome you to join our family of advanced machinery.
®
N-C Carpet Binding & Equipment Corp.
858 Summer Avenue • Newark, New Jersey 07104
973-481-3500 • 1-800-526-1184 • From Canada: 1-800-336-1184 • Fax: 973-481-0839
www.n-ccarpet.com • nccarpet1@aol.com
PMS 641
is a registered trademark of N-C Carpet Binding & Equipment Corp.
®