Zierick PNs 6195, 6281 Replaced By New Improved PN 6285

Transcription

Zierick PNs 6195, 6281 Replaced By New Improved PN 6285
Zierick Manufacturing
Corp. is the leading
source of solutions to
complex interconnection
requirements and
problems. From standard
products to our custommade goods, Zierick has
invented and produced
technologies which have
become the industry
standard and which will
continue to shape the
industry in the future.
Zierick also provides its
customers with assembly
equipment,
interconnection
hardware, and taped
terminals. For all of its
88 years, Zierick has
maintained custom
stamping capabilities,
setting the standard in
both design leadership
and quality tooling and
stamping.
Zierick PNs 6195, 6281
Replaced by
New Improved PN 6285
As part of our continuous improvement program, Zierick has created a new improved terminal,
Part Number 6285, which will replace the parts listed below.
On the strip (or reeled) form of the existing PN 6195, there is a connecting tie at the terminal’s
base. This connection is removed by a Zierick feeder prior to presentation. This leaves an
unplated edge at the base of the terminal, which is a less than optimal condition for solderability.
The new terminal, Part Number 6285, is carried (or connected to each other in strip or reeled
form) at the terminal’s shoulder, rather than at the base. This configuration lends itself to more
reliable and consistent feeding for pick up and placement. Carrying the terminal at the shoulder
also minimizes the potential for deformation of the base, which might affect the perpendicularity
of the terminal when placed on a PCB.
When the Zierick feeder severs the connection between the new terminals prior to presentation,
it leaves no unplated material on the base. This results in a better solder fillet and a stronger
solder joint when the parts are soldered onto the Printed Circuit Board. We have also eliminated
the potential for a burr at the base by shearing the terminal at its shoulder. This further
improves the perpendicularity of the terminal on the PCB, and the terminal’s retention to the
Printed Circuit Board.
The base and footprint of the new Part Number 6285 are identical to those of the old versions,
PN 6195 and PN 6281. Therefore no change is required either to the PCB or the manufacturing
process. However, the new terminal is slightly taller than the old version. This is because the
distance from the base of the part to the carrier was increased to keep the carrier above the
board and solder fillet, while the distance from the top of the carrier to the top of the part is
controlled by a UL specification.
After a transition period, the old PN 6195 and PN 6281 will be discontinued. Please plan your
needs accordingly. Questions or comments can be directed to contactus@zierick.com.
PN 6195
PN 6195TZ
PN 1195
PN 1195TG
PN 1285
PN 6281
PN 1281
PN 1281TG
Replaced By
PN 6285
Replaced By
PN 1285TZ
Still in production and available
Still in production and available
Still in production and available
Replaced By
PN 6285
Replaced By
PN 1195
Replaced By
PN 1195TG
Zierick Manufacturing Corporation | 800-882-8020 | www.zierick.com