B+H_Broschuere_FBA_EAE_GB_v2_RZ_Layout 1

Transcription

B+H_Broschuere_FBA_EAE_GB_v2_RZ_Layout 1
MADE IN GERMANY
Window sill and
patio connections
planned to perfection!
Universal thermally insulated
window sill and screed connection components
www.beck-heun.de
2
Easy, fast and economical
The ideal solution for window sill and screed connections
In the past, there was no optimal method for making reliable window sill and
screed connections, so heat losses and leaks were common. The Thermo
range of universal window sill and screed connection components from
Beck+Heun provides a perfect solution for your building projects and fulfils
your every wish for ease of architectural design and installation.
CONTENTS
Connection components for every requirement
For roller shutters, venetian blinds, or windows
without shading units
Page 4 / 5
Eliminating thermal bridges in buildings
With reliable, technically sophisticated Thermo components
Page 6 / 7
Easy design and installation
Suitable for every requirement
Page 8 / 9
THERMO-FBA-RG
Window sill connection with shutter box
Page 10
THERMO-EAE-RG
Screed connection with shutter box
Page 11
THERMO-FBA-SHADOW
Window sill connection with venetian blind box
Page 12
THERMO-EAE-SHADOW
Screed connection with venetian blind box
Page 13
THERMO-FBA-UNI
Window sill connection without shading unit
Page 14
THERMO-EAE-UNI
Screed connection without shading unit
Page 15
Special connection options
The right connection component for every application
Page 16 / 17
Suitable for every window profile
Versatile window sill and screed connection components
Page 18 / 19
3
Connection components for
every requirement
For roller shutters, venetian blinds, or windows without shading units
Window sill and screed connection components are available for every conceivable requirement and every wall thickness. We can also supply suitable components for special formats.
You can obtain window sill and screed connection components for roller shutter or venetian
blind boxes or for window modules without a shading unit. Since the components facilitate
easy planning and installation, any previously planned shutter boxes can be effortlessly accommodated.
Window sill connection components
THERMO-FBA-RG
THERMO-FBA-SHADOW
THERMO-FBA-UNI
Window sill connection with
Beck+Heun shutter box closed on
the room side
Window sill connection with
Beck+Heun venetian blind box
system
Window sill connection without
shading unit
Screed connection components
THERMO-EZM
Supplementary screed module
With a patio connection, the convenient supplementary screed module
gives you the option of fitting the
window to a flush or raised patio
construction.
SIMPLE
FITTING
PLUG-IN
4
THERMO-EAE-RG
THERMO-EAE-SHADOW
THERMO-EAE-UNI
Screed connection with Beck+Heun
shutter box closed on the room side
Screen connection with Beck+Heun
venetian blind box
Screed connection without
shading unit
Window sill connection with THERMO-FBA
Screed connection with THERMO-EAE
5
Eliminating thermal bridges in buildings
with reliable, technically sophisticated Thermo components
Innovative window sill and screed connection components from Beck+Heun are designed
to minimise heat losses from thermal bridges and to ensure perfect structural integration
and faultless installation. Thanks to many years of continuous product improvements,
these contemporary prefabricated building components meet the demands of modern
cost-effective construction. In addition to consistently conforming to applicable building
physics guidelines, they offer numerous advantages:
Advantages for owners and builders
 A more comfortable living space
 Eliminates draughts and cold areas near the bottom window connection
 Suitable for new construction and renovation
 Compatible with Beck+Heun roller shutter and venetian blind systems
 Complies with stringent energy savings regulations
 Window insulation panel with optimised thermal bridge characteristics for
low-energy building construction
 Easy, simple installation
 Compliance with building physics guidelines increases the residential value of the building
Advantages for architects
 Cost-effective solution for new construction and renovation
 Innovative solution with defined window location in the masonry
 Special designs possible
 Architectonic solutions for façade design
 Trouble-free installation in large window walls
 Suitable for all types of masonry
 Tender specification texts available at www.beck-heun.de
Advantages for installers
 Made-to-measure solutions available for all wall thickness
 Proper thermal insulation and sealing of the sill area
 Avoids thermal bridges
 Installation during the shell construction phase is easily possible and eliminates
the need for costly subsequent joint insulation
 Suitable for use in new buildings as well as remodelling and renovation work
 Dimensions comply with Beck+Heun roller shutter and venetian blind systems
6
Material
Excellent thermal
insulation characteristics
The components are made from EPS rigid
polystyrene foam (WLG 035) or optionally
Neopor (WLG 032) and guarantee durability,
reliability and stability. The thermal insulation
panels are prepared for a patio connection
or an aluminium or stone window sill.
EPS rigid polystyrene foam (WLG 035) and
Neopor (WLG 032) have excellent thermal
insulation characteristics and decouple the
interior and exterior environments. In addition
to reducing energy costs, they provide
soundproofing.
Extensive building component testing
Beck+Heun Thermo components are fully resistant to driving rain. At differential test pressures
up to 600 Pa, no water entry through the connection joint was seen in tests for resistance to
driving rain.
TEST TYPE
RESULT
Air permeability up to 1000 Pa in new condition
a < 0,1 m3 / (m h daPa2/3)
Resistance to driving rain up to 600 Pa in new condition
No water entry
Simulated short-term load
 Temperature cycle load: 10 cycles (+60 °C – 15 °C)
 Wind load: pressure/suction 200 cycles up to 1000 Pa
No detectable changes
No detectable changes
Air permeability up to 1000 Pa after short-term load
a < 0,1 m3 / (m h daPa2/3 )
Resistance to driving rain up to 600 Pa after short-term load
No water entry
Wind load pressure/suction up to 2000 Pa after short-term load
No permanent deformation
Wind load safety test 3000 Pa after short-term load
No impairments
Excerpt from building component test and test report for ROKA-CO2MPACT:
Test of connection properties and attachment between window, connection components and building structure in new
condition and after simulated short-term loads. Tests for airtightness, resistance to driving rain, mechanical loads and
connections to the building structure.
7
Easy design and installation
Suitable for every requirement
Size it up
You can easily define the exact window installation point, with full design flexibility. The decisive factor is always dimension x, which is referenced to the outer edge of the wall structure
and therefore defines the outer edge of the window frame.
ETICS
WDVS
innen
Interior
Exterior
außen
FBA
Interior
innen
Exterior
außen
FBA
x x
40 15 Maß
EAE
Exterior
außen
FBA
40 15
x x
Maß
40 15
x x
Maß
EAE
x x
40 15 Maß
Interior
innen
40 15
x x
Maß
40 15
x x
Maß
EAE
Dimension x = outer edge of masonry shell or ETICS to outer edge of window frame
8
Installation of Thermo connection components
Window installation
The connection components can be used in all situations and are suitable for all requirements.
The components, all of which can be installed with a minimum of effort, ensure reliability and
stability and form a sealed barrier between inside and outside.
1
Glue the L profile to the window profile
(L profile height and width matched to
window profile)
15
Check the sill for dimensional accuracy.
15
2
Glue the L profile to the U profile (15 mm
from outer edge) and caulk the connection
between the L profile and the window frame
(Beck+Heun Cosmoplast MS 46 adhesive,
coverage: 1 tube per approx. 1.50 m)
Glue the Thermo component in place and align it
3
Caulk the bottom and sides of the window
frame 40 mm (Beck+Heun Cosmoplast MS
46 adhesive)
Set the window frame with attached L profile and caulk in place
9
THERMO-FBA-RG
Window sill connection with shutter box
7
6
1
5
2
3
4
107
innen
Interior
1 THERMO-FBA-RG window sill connection component
2 Window unit support profile
3 Structural profile for vertical load transfer and screw
fastening of window sill
4 L profile for gluing to window profile
außen
Exterior
5 Recess for sound-deadening strip
6 Aluminium or stone window sill, thickness
30 mm max., 5° slope
7 Interior window sill, thickness 30 mm max.
78
MW 24.0
40
15 107
40
15 107
40
15 107
40
15 107
40
15 107
40
15 107
40
15 107
40
15 107
240
118
MW 28.0
280
138
MW 30.0
300
178
MW 34.0
340
198
MW 36.0
360
218
380
MW 38.0
258
420
MW 42.0
328
MW 49.0
30
53
5°
83
50
33
EPS rigid polystyrene foam (WLG 035) or Neopor (WLG 032) thermal insulation panel,
prepared for an aluminium or stone external window sill and an interior window sill to be
fitted below the window casing
490
107 mm = outer edge of window frame to
outer edge of window sill
Components for non-standard wall dimensions available on request
10
 Interior insulation thickness 50 mm,
exterior insulation thickness 53 mm with
5° slope
 Height below window frame 33 mm
interior, 30 mm exterior
 Exterior window setback 107 mm (outer
edge of window frame)
 Window frame projection at exterior
window sill connection 15 mm
 Window frame projection at interior
window sill connection 5 mm (60 mm
window frame), 15 mm (70 mm window
frame), or 25 mm (80 mm window frame)
 Window sill thickness interior and exterior
30 mm max.
 3 mm recess for soundproofing
foil and glue
THERMO-EAE-RG
Screed connection with shutter box
5
1
2
3
4
107
1 THERMO-EAE-RG screed connection component
2 Window unit support profile
3 Structural profile for load transfer
4 Structural profile to receive horizontal load
5 L profile for gluing to window profile
innen
Interior
außen
Exterior
50
50
 Interior and exterior insulation thickness
50 mm
 Height below window frame 110 mm
withheight 160 mm or 170 mm with height
220 mm
 Exterior window setback 107 mm (outer
edge of window frame)
 Window frame projection at external
window sill connection 15 mm or patio
covering connection 15 mm
 Window frame projection at interior floor
covering connection 5 mm (60 mm
window frame), 15 mm (70 mm window
frame), or 25 mm (80 mm window frame)
 Textured steel reinforcing frame (35 mm)
at height of 180 mm or more
 Optional supplementary module available
for exterior window sill
 Supplementary module factory fitted or
fitted on site
 Screed insulation strips and fixingmaterial to
be provided by customer
160 / 220
110 / 170
EPS rigid polystyrene foam (WLG 035) or Neopor (WLG 032) thermal insulation panel,
prepared for lower window connection in the screed region. Can optionally be used for a
patio connection or for a supplementary module for an aluminium or stone window sill.
78
MW 24.0
118
MW 28.0
15 107
40
15 107
40
15 107
40
15 107
40
15 107
40
15 107
40
15 107
40
15 107
280
138
MW 30.0
300
178
MW 34.0
340
198
MW 36.0
360
218
380
MW 38.0
258
420
MW 42.0
328
MW 49.0
40
240
490
107 mm = outer edge of window frame to outer
edge of window sill
Components for non-standard wall dimensions available on request
11
THERMO-FBA-SHADOW
Window sill connection with venetian blind box
7
6
1
5
2
3
4
170
innen
Interior
außen
Exterior
1 THERMO-FBA-SHADOW window sill connection
component
2 Window unit support profile
3 Structural profile for vertical load transfer and screw
fastening of window sill
4 L profile for gluing to window profile
5 Recess for sound-deadening strip
6 Aluminium or stone window sill, thickness
30 mm max., 5° slope
7 Interior window sill, thickness 30 mm max.
55
40
MW 28.0
15
170
15
170
15
170
15
170
15
170
15
170
15
170
280
75
40
MW 30.0
300
115
40
MW 34.0
340
135
40
MW 36.0
360
155
40
380
MW 38.0
195
40
420
MW 42.0
265
MW 49.0
30
53
5°
83
50
33
EPS rigid polystyrene foam (WLG 035) or Neopor (WLG 032) thermal insulation panel,
prepared for an aluminium or stone external window sill and an interior window sill to be
fitted below the window casing
40
490
170 mm = outer edge of window frame to
outer edge of window sill
Components for non-standard wall dimensions available on request
12
 Interior insulation thickness 50 mm,
exterior insulation thickness 53 mm
with 5° slope
 Height below window frame 33 mm
interior, 30 mm exterior
 Exterior window setback 170 mm
(outer edge of window frame)
 Window frame projection at exterior
window sill connection 15 mm
 Window frame projection at interior
window sill connection 5 mm (60 mm
window frame), 15 mm (70 mm window
frame), or 25 mm (80 mm window frame)
 Window sill thickness interior and exterior
30 mm max.
 3 mm recess for soundproofing
foil and glue
THERMO-EAE-SHADOW
Screed connection with venetian blind box
5
1
2
3
4
170
1 THERMO-EAE-SHADOW screed connection component
2 Window unit support profile
3 Structural profile for load transfer
innen
Interior
4 Structural profile to receive horizontal load
5 L profile for gluing to window profile
außen
Exterior
50
 Interior and exterior insulation thickness
50 mm
 Height below window frame 110 mm
with height 160 mm or 170 mm with
height 220 mm
 Exterior window setback 170 mm
(outer edge of window frame)
 Window frame projection at exterior
window sill connection 15 mm or patio
covering connection 15 mm
 Window frame projection at interior floor
covering connection 5 mm (60 mm window
frame), 15 mm (70 mm window frame),
or 25 mm (80 mm window frame)
 Textured steel reinforcing frame (35 mm)
at height of 180 mm or more
 Optional supplementary module available
for exterior window sill
 Supplementary module factory fitted or
fitted on site
 Screed insulation strips and fixingmaterial to
be provided by customer
160 / 220
50 110 / 170
EPS rigid polystyrene foam (WLG 035) or Neopor (WLG 032) thermal insulation panel,
prepared for lower window connection in the screed region. Can optionally be used for a
patio connection or for a supplementary module for an aluminium or stone window sill.
55
40
MW 28.0
75
40
MW 30.0
170
15
170
15
170
15
170
15
170
15
170
15
170
300
115
40
MW 34.0
340
135
40
MW 36.0
360
155
40
380
MW 38.0
195
40
420
MW 42.0
265
MW 49.0
15
280
40
490
170 mm = outer edge of window frame to outer
edge of window sill
Components for non-standard wall dimensions available on request
13
THERMO-FBA-UNI
Window sill connection without shading unit
7
6
1
x
5
2
Interior
innen
Exterior
außen
3
4
1 THERMO-FBA-UNI window sill connection component
2 Window unit support profile
3 Structural profile for vertical load transfer and screw
fastening of window sill
4 L profile for gluing to window profile
5 Recess for sound-deadening strip
6 Aluminium or stone window sill, thickness
30 mm max., 5° slope
7 Interior window sill, thickness 30 mm max.
30
53
5°
83
50
33
EPS rigid polystyrene foam (WLG 035) or Neopor (WLG 032) thermal insulation panel,
prepared for an aluminium or stone external window sill and an interior window sill to be
fitted below the window casing
40
240
15
x
MW 24.0
40
280
15
x
MW 28.0
40
300
15
x
MW 30.0
40
340
15
x
MW 34.0
40
360
15
x
MW 36.0
40
380
15
x
MW 38.0
40
420
15
x
MW 42.0
40
490
15
x
MW 49.0
Dimension x = outer edge of masonry shell or
ETICS to outer edge of window
frame
Components for non-standard wall dimensions available on request
14
 Interior insulation thickness 50 mm,
exterior insulation thickness 53 mm
with 5° slope
 Height below window frame 33 mm
interior, 30 mm exterior
 Window setback (x) to outer edge of
window frame (projection 15 mm)
 Window frame projection at exterior
window sill connection 15 mm
 Window frame projection at interior
window sill connection 5 mm (60 mm
window frame), 15 mm (70 mm window
frame), or 25 mm (80 mm window frame)
 Window sill thickness interior and exterior
30 mm max.
 3 mm recess for soundproofing
foil and glue
THERMO-EAE-UNI
Screed connection without shading unit
5
1
x
2
3
4
1 THERMO-EAE-UNI screed connection component
2 Window unit support profile
3 Structural profile for load transfer
innen
Interior
4 Structural profile to receive horizontal load
5 L profile for gluing to window profile
außen
Exterior
50
 Interior and exterior insulation thickness
50 mm
 Height below window frame 110 mm
with height 160 mm or 170 mm with
height 220 mm
 Window setback (x) to outer edge of
window frame (projection 15 mm)
 Window frame projection at exterior
window sill connection 15 mm or patio
covering connection 15 mm
 Window frame projection at interior floor
covering connection 5 mm (60 mm window
frame), 15 mm (70 mm window frame),
or 25 mm (80 mm window frame)
 Textured steel reinforcing frame (35 mm)
at height of 180 mm or more
 Optional supplementary module available
for exterior window sill
 Supplementary module factory fitted or
fitted on site
 Screed insulation strips and fixingmaterial to
be provided by customer
160 / 220
50 110 / 170
EPS rigid polystyrene foam (WLG 035) or Neopor (WLG 032) thermal insulation panel,
prepared for lower window connection in the screed region. Can optionally be used for a
patio connection or for a supplementary module for an aluminium or stone window sill.
40
240
15
x
MW 24.0
40
280
15
x
MW 28.0
40
300
15
x
MW 30.0
40
340
15
x
MW 34.0
40
360
15
x
MW 36.0
40
380
15
x
MW 38.0
40
420
15
x
MW 42.0
40
490
15
x
MW 49.0
Dimension x = outer edge of masonry shell or ETICS
to outer edge of window frame
Components for non-standard wall dimensions available on request
15
Special connection options
The right connection component for every application
Special solutions for window sill connections
30
50
53
y
83
5°
33
5°
x
40
Outside corner reinforcement
30
Exterior window sill connection only
33
Special height
Round bays and corner profiles (inside and outside) available on request
40
15
33
Interior window sill connection only
83
50
50
53
83
7°
33
30
Slope >5° or <5°
15
40
40
15
15
Components for non-standard wall dimensions available on request
Special solutions for screed connection
50
110 / 170
Outside corner reinforcement
50
X
x
40
160 / 220
Exterior screed connection only
y
Special height
15
40
15
110 / 170
50
160 / 220
Interior screed connection only
40
15
Components for non-standard wall dimensions available on request
16
Special solutions with supplementary modules
130 / 190
80/140
160 / 220
THERMO-EZM window sill – supplementary screed module for window sill
x
x
130 / 190
160 / 220
120 / 180
40
80/140
70/130
THERMO-EZM lift & slide unit – supplementary screed module for lift & slide unit
15
15
Tiefe Schiebeanlage
17
Suitable for all types of window profile
Versatile window sill and screed connection components
VEKA - 70
VEKA - 90
SALAMANDER 70
SALAMANDER 76
Salamander 70
Veka 70
SCHÜCO 70
Schüco 70
Salamander 76
Veka 90
15
15
15
15
SCHÜCO 82
IDEAL 5000-70
44.3
IDEAL 6000 -80
33.8
44.3
IDEAL 8000-85
Ideal 6000-80
9.5
38.3
8.9
9.1
38.3
9.1
9
15
KBE 370
Ideal 8000-85
KBE
Schüco 82
Ideal 5000-70
TROCAL PROFINE 88+
TROCAL 70
KÖMMERLING 70
40.3
GEALAN 74
15
36.3
9.7
40.3
15
9.5
40.3
15
9.5
15
9.5
36.3
9.4
15
GEALAN 82
Gealan 82
Trocal Profine 88+
Trocal 70
Kömmerling 70
Gealan 74
REHAU 70
THYSSEN 76
THYSSEN 71
42.3
REHAU 86 GENEO
15
42.3
10.4
42.3
15
10.4
40.3
15
10.3
15
10.7
40.3
9.5
15
HOLZFENSTER
Rehau 70
Thyssen 76
Rehau 86 Geneo
36.3
15
42.3
10.4
15
10.5
36.3
9.5
15
The height, width and length of the L profile are individually matched to each window profile.
18
15
42.3
10.4
Thyssen 71
15
40
Window frame caulking
Resistance to driving rain is assured by gluing the L profile to the toothed U profile and caulking along the sides of the outer
window frame recess.
15
15
33
30
110 / 170 3
40
3
40
Window sill connection
Screed connection
Window frame caulking
on bottom and sides
Window sill caulking
The standard 15 mm window frame projection allows either aluminium or stone window sills to be used.
Aluminium window sill
Stone window sill
Exterior window frame caulking
Connection caulking, window with exterior stone window sill
Recess for sound-deadening strip
Recess for adhesive
19
ad-hok.com | FBA_EAE_GB_v2 | Version 11.10 | Printing 11.2010: 0
Beck+Heun GmbH · Stotternheimer Straße 10 · 99086 Erfurt, Germany
Telephone: +49 (0) 3 61 / 7 40 56-0 · Fax: +49 (0) 3 61 / 7 40 56-11 · Web: www.beck-heun.de · E-mail: info.erfurt@beck-heun.de