Adimec High Performance PDF - CL

p r o d u c t
s p e c i f i c a t i o n s
Adimec 4M CMOS family
Ultra fast 4-megapixel camera for machine vision
Key specifications
Applications
• 4-Megapixel
• Flat Panel inspection
• Up to 196 fps @ full resolution
• Solar inspection
• Compatible with standard frame grabbers
• 2D & 3D AOI
• Unsurpassed image quality
• SPI
• Reliable performance
• Metrology
• Inspection
Description
The Adimec 4M CMOS family exists of three models. Starting from a high speed fully configurable
Adimec-4050 with CCD-like image quality to an ultra high speed Adimec-4200, especially designed
for applications which requires the possible highest frame rates. The standard burst mode allows the
highest acquisition speeds, still with a standard 8-tap Camera Link frame grabber. Higher sustained
acquisition speeds can be achieved by the 10-tap mode.
With Adimec’s proprietary camera electronics and firmware design, this camera family offers a unique
combination of high frame speed, image quality, and exceptional reliability.
Adimec
Adimec designs and manufactures cameras for OEM customers
with demanding applications whose goal is to be a product leader in
their market. Unlike competitors who are offering general-purpose
cameras, our products and support are focused to offer the benefits
the OEMs need to be ahead.
www.adimec.com
U l tra fa st 4 - megapixel camer a f or m ac hin e v isi on
Specifications
Adimec-4050
Adimec-4150
Sensor
4/3” CMOS
Pixel size
7.0 µm
Resolution
Max Frame Rate
Adimec-4200
2352 x 1728 pixels
144 fps
N/A
196 fps
53 fps
144 fps
166 fps (@ 8-tap)
196 fps (@ 10- tap)1
6.9 ms
6.9 ms
5.1 ms
Burst @ Full resolution
Max Frame Rate
Sustained @ Full resolution
Readout Time
Sensitivity @ 100 % video,
4.6 Lux (mono), 12.0 Lux
(Color)
1x gain, 33 ms integration time
40 e56 dB
Readout Noise
Dynamic Range
Defect Pixel Correction
Yes
Electronic Shutter
Rolling Shutter
Gain
Image Acquisition
Programmable between 1 - 8 x
Continuous - Control Burst Mode
ROI
Video Output
Output resolution
Continuous - Control
Continuous - Control Burst Mode
Dynamic, multiple, programmable
Programmable
Base or medium
8 or 10 bit
Monochrome/ Color
Single, programmable
Full
Programmable Base, medium,
full or Deca1
8 bit
8 or 10 bit
Available in monochrome or color (bayer RGB)
I/O Interface
Programmable strobe output and trigger input
Power Input
10.5 - 16.0 Vdc
Power Dissipation
4W
6W
Operating Temperature
8W
-10ºC to +40ºC
EMC / EMI
EN61000-6-3 and EN61000-6-2
Testing
100 % Tested on all specifications
Weight
350 gram (without lensmount)
Lensmount
Available with C-mount, T2-mount or M42-mount
Compliance
CE, ROHS
All specifications are typical at 25ºC unless otherwise mentioned. 1Upon request.
Dimensions
Adimec
Adimec is a leading worldwide
supplier of high performance,
innovative, and reliable camera
products for use in:
• Machine Vision
• Medical Imaging
• Outdoor Imaging
Adimec’s mission is to serve
leading OEMs around the world
who value quality and reliability
as essential to their success.
Adimec is specialized in offering additional camera functionality and create customer specific
cameras for large volume programs. For more information, please contact your Adimec office.
Contact us today to find out why
top corporations rely on Adimec.
For maximum image quality, performance, and reliability in demanding applications - Choose Adimec
North America
Phone: (+1) 781-279-0770
Fax:
(+1) 781-279-0571
E-mail: salesus@adimec.com
Europe
Phone: (+31) 40-2353920
Fax: (+31) 40-2353925
Email: saleseu@adimec.com
Japan & Korea
Phone: (+81) 3-5968-8377
Fax:
(+81) 3-5968-8388
E-mail: salesjp@adimec.com
Asia - Pacific
Phone: (+65) 6334-1236
Fax:
(+65) 6334-1436
E-mail: salesap@adimec.com
LFL Adimec-4xx0 CMOS FAM. rev. 0.2 Oct. 2010 - Detailed information on request - Subject to change without notice
www.adimec.com
p r o d u c t
s p e c i f i c a t i o n s
Megapixel Cameras for Fast Machine Vision
Monochrome and color
Adimec-1000 family
Description
Because accuracy, throughput, and up-time are key success factors for machine vision
OEMs, the Adimec-1000 family of cameras offers superior image quality, higher frame rates,
and greater durability than other machine vision cameras.
The color cameras in the Adimec-1000 family utilize one CCD sensor with a Bayer color
ilter, which complements host-based color processing that is available with most high-end
frame grabbers.
The Adimec-1000 family of digital megapixel cameras was created for OEMs worldwide with
demanding machine vision applications who require a camera that will make a difference in their
system. Adimec combined select sensors with proprietary electronics to produce cameras
with unequaled performance.
Specifications
• 1, 2, and 4 megapixel resolution
• Continuous or asynchronous operation
• Small outline & low power consumption
• Unparalleled image quality
• Camera Link interface
• For host-based color processing (color cameras only)
Adimec designs and manufactures cameras for OEM
customers with demanding applications whose
goal is to be a product leader in their market. Unlike
competitors who are offering general-purpose cameras,
our products are developed with the speciic needs
of OEMs and their applications in mind.
www.adimec.com
Real time, digital megapixel cameras for fast machine vision applications
Real time, digital megapixel cameras for fast machine vision applications
Monochrome
Color
Adimec-1000m Adimec-1600m Adimec-1620m Adimec-2000m Adimec-4000m Adimec-4020m
Resolution
1004 x 1004
(1M)
1600 x 1200
(2M)
1600 x 1200
(2M)
1920 x 1080
(HDTV)
2048 x 2048
(4M)
2048 x 2048
(4M)
Resolution
Sensitivity
5.5 Lux
4.5 Lux
2.25 Lux
6 Lux
4.9 Lux
2.7 Lux
Sensitivity
@ 33 ms integration,
@ 33 ms integration,
100 % video, 1x gain
100 % video, 1x gain
Frame rate
@ full resolution
Sensor & pixel size
Dynamic range
Full well capacity
Video output
Lensmount
Size
Weight
Operating temp.
MTBF
Features
Compliance
Adimec-1000m
50 fps (Dual)
30 fps (Single)
34 fps (Dual)
18 fps (Single)
60 dB
62 dB
34 fps (Dual)
18 fps (Single)
32 fps (Dual)
17 fps (Single)
16 fps (Dual)
8 fps (Single)
16 fps (Dual)
8 fps (Single)
63 dB
62 dB
Interline CCD with 7.4 µm square pixels
60 dB
62 dB
40 ke-
8, 10, or 12 bit
C-Mount
45 x 45 x 75 mm
52.5 x 52.5 x 79.4 mm
185 g
250 g
-10°C to +40°C
75,000 h @ 40°C
Electronic Pixel Correction • Vertical binning • Continuous and controlled operation
CE • RoHS
Frame rate
@ full resolution
Sensor & pixel size
Dynamic range
Full well capacity
Video output
Lensmount
Size
Weight
Operating temp.
MTBF
Features
Compliance
Adimec-1000c
Adimec-1600m
Adimec-1600c
Adimec-1620m
Adimec-1620c
Adimec-2000m
Adimec-2000c
Adimec-4000m
Adimec-4020c
Adimec-4020m
Adimec-1000c
Adimec-1600c
Adimec-1620c
Adimec-2000c
Adimec-4020c
1004 x 1004
(1M)
1600 x 1200
(2M)
1600 x 1200
(2M)
1920 x 1080
(HDTV)
2048 x 2048
(4M)
16.5 Lux
13.5 Lux
6.75 Lux
19.5 Lux
8.2 Lux
(for green pixels)
(for green pixels)
(for green pixels)
(for green pixels)
(for green pixels)
50 fps (Dual)
30 fps (Single)
34 fps (Dual)
18 fps (Single)
34 fps (Dual)
18 fps (Single)
32 fps (Dual)
17 fps (Single)
16 fps (Dual)
8 fps (Single)
60 dB
62 dB
Interline CCD with 7.4 µm square pixels
60 dB
62 dB
40 ke8, 10, or 12 bit
C-Mount
45 x 45 x 75 mm
52.5 x 52.5 x 79.4 mm
185 g
250 g
-10°C to +40°C
75,000 h @ 40°C
Electronic Pixel Correction • Continuous and controlled operation
CE • RoHS
62 dB
Real time, digital megapixel cameras for fast machine vision applications
We designed the speciications for our machine vision camera platform
with the input of our most demanding customers and key suppliers.
This Adimec 1000 Family is based on the Camera Link standard. These
cameras are known to offer higher image quality, faster frame speeds
and greater durability than other machine vision cameras. Adimec’s
1000 family is optimized for OEMs that seek to both lower the cost of
integrating multiple cameras and maximize their system performance.
Because these cameras are extremely versatile, they are also being
used for applications that range from outdoor trafic control to eye
surgery.
We cross-breed innovations from the three markets we serve to make all
of our cameras better. Our experience in medical applications – where clear
images are critical for correct diagnosis – motivated us to develop cameras with superior image quality. This technology has been transferred to our
machine vision cameras, enabling our customers to substantially increase
defect detection and yields. The military market requires high-performance
imaging in harsh environments driving us to continuously improve the
reliability of all of our cameras. For our machine vision customers, this
means less downtime and lower cost of ownership.
Benefits/Features
• Superior inspection and measurement capability through Adimec’s
proprietary imaging technology.
• High resolution (1 – 4 megapixel) for crisp, clear images in a variety of
aspect ratios.
• High frame rates allow for faster throughputs.
• Rugged design allows for high product reliability and reduces sensitivity
to environment.
• Small outline and low power consumption minimizes system constraints.
Applications
• Semiconductor inspection
• Electronics manufacturing
• Metrology
• Industrial X-ray
• Trafic monitoring
Adimec has the ability to offer additional camera functionality and create
customer speciic cameras for large volume programs. For more information,
please contact your nearest Adimec ofice.
Adimec
Adimec is a leading worldwide supplier of high performance,
innovative, and reliable camera products for use in:
• Machine Vision
• Medical Imaging
• Defense Imaging
Adimec’s mission is to serve leading OEMs around the world who value
quality and reliability as essential to their success.
Contact us today to ind out why top corporations rely on Adimec.
For maximum image quality, performance, and reliability in demanding applications – Choose Adimec
North America
Phone: (+1) 781-279-0770
Fax:
(+1) 781-279-0571
E-mail: salesus@adimec.com
159961 LFL A1000 Fam. rev. 1.1
Europe
Phone: (+31) 40-2353920
Fax: (+31) 40-2353925
Email: saleseu@adimec.com
Sept. 2007
Japan & Korea
Phone: (+81) 3-5968-8377
Fax:
(+81) 3-5968-8388
E-mail: salesjp@adimec.com
Detailed information on request
Subject to change without notice
Asia - Paciic
Phone: (+65) 6334-1236
Fax:
(+65) 6334-1436
E-mail: salesap@adimec.com
www.adimec.com
OPAL series
High speed CCD cameras
TRUESENSE 5.5 image sensors
Key speciications
• 1, 2, 4 and 8 Megapixel resolutions
• 4 channel image sensor readout for high frame rates
• 62 dB dynamic range
• Precise tap matching for high uniform images over full temperature range
• Available with Camera Link, GigE Vision or CoaXPress interface
Description
The OPAL series is based on the TRUESENSE 5.5-micron Interline Transfer CCD image sensors
allowing greater spatial resolution at high speeds. This state-of-the-art sensor technology
combined with Adimec’s advanced proprietary electronics provides excellent uniform images
with high linear behaviour ity over the full dynamic range through optimized embedded video
enhancement.
The OPAL series will allow high-end OEM customers meet their needs to be leading in
throughput, precision and ingenuity
Adimec
Adimec designs and manufactures cameras for OEM customers
with demanding applications whose goal is to be a product leader
in their market. Unlike competitors who offer general฀purpose
cameras, our products and support are focused to offer the
beneits OEMs need to be ahead.
High speed CCD cameras
SPECIFICATIONS
More detailed speciications are available in the OPAL series datasheet on www.adimec.com
OPAL-1000
OPAL-1600
OPAL-2000
OPAL-4000
OPAL-8000
Resolution
1024 x 1024
1600 x 1200
1920 x 1080
2336 x 1752
3296 x 2472
Frame rate
123 fps
70 fps
66 fps
32 fps
16 fps
(Between brackets: GigE vision)
(60 fps)
(34 fps)
(32 fps)
(16 fps)
(8 fps)
Optical size
1/2”
2/3”
2/3”
1”
4/3”
Sensor technology
TRUESENSE 5.5 micron Interline Transfer CCD
Pixel size
5.5 μm x 5.5 μm
Dynamic range
62 dB
Readout noise / full well
14 e- / 18 ke-
Smear / blooming surpression
-100 dB / 300x
Output resolution
8, 10 and 12 bit
Interface
Camera Link, GigE Vision or Camera Link
Triggering & external Sync.
Strobe signal and trigger signal (Programmable)
Power input
10.2 - 27.6 Vdc
Power dissipation
4.3 W
5W
5W
Weight
295 g (Incl. lensmount)
Optical interface
C-Mount
Operating temperature
-10°C to +50°C
Reliability
MTBF > 75,000 h @ 40°C
Compliance
CE, ROHS
Testing
Every camera is 100% tested on all speciications
4.3 W
FUNCTIONALITY
DIMENSIONS
√
Mirroring
√
√
ROI
O
O
√
Auto Exposure Control
O
-
Contrast enhancement (VEM)
O
-
Programmable I/O
√: Standard O: Optional -: Not available
-
√
√
√
√
√
Digital ine gain (32x)
52.5
52.5
√
Binning (2x, 4x and 8x)
Pixel remap
Sizes are in mm. Outline is based on Camera Link version.
Dimensions are identical for all interface versions.
√
79.4
79.4
52.5
52.5
Defect pixel correction
4.3 W
Camera Link
12 - 24 Vdc
I/O
CUSTOMIZATION
All models of the OPAL series are customizable to it speciic
system outline, functionality or performance requirements.
Please contact us about your possibilities.
For maximum image quality, performance, and reliability in demanding applications - Choose Adimec
North America
Phone: (+1) 781-279-0770
Fax:
(+1) 781-279-0771
E-mail salesus@adimec.com
Europe
Phone: (+31) 40-2353920
Fax:
(+31) 40-2353925
E-mail: saleseu@adimec.com
Japan & Korea
Phone: (+81) 3-5968-8377
Fax:
(+81) 3-5968-8388
E-mail: salesjp@adimec.com
Asia - Paciic
Phone: (+65) 6334-1236
Fax:
(+65) 6334-1436
E-mail: salesap@adimec.com
LFL OPAL series 5.5 rev2 Dec 2013 - Detailed information on request - Subject to change without notice - Actual products may differ from photos
www.adimec.com
Monochrome, color and NIR
Product Specifications Qs series
Qs-2A120 and Qs-4A60
Introduction
This document describes the functionality and key speciications of the Qs 2 and 4 Megapixel cameras.
The Qs-2A120 and Qs-4A60 are equipped with a pipe-lined global shutter CMOS sensor and embedded in a small
housing. Pipe-lined global shutter technology assures low read noise combined with accurate shutter performance. All
Quartz cameras are itted with Adimec True Accurate Imaging® technology. True Accurate Imaging is a combined set of
image technologies enabling the best imaging performance for inspections and metrology applications.
Product Features
•
Capture Image Details with Adimec True Accurate Imaging Technology
•
Monochrome, Color, NIR solutions
•
Camera Link base: bandwith optimal use through 3 tap or 2 tap
•
Fast Acquisition through ROI and Burst mode
•
Compact outline and small footprint
•
Customization upon request
Adimec Advanced Image Systems B.V
Qs-series Issue 1.0
-1-
July 2012
Qs- series Revision 1.1
Product Specifications Qs series
Performance
All values are typical and measured at 25°C
Qs-4A60
Qs-2A120
Available in monochrome, Bayer color ilter and NIR optimized
Sensor
Active pixel digital CMOS sensor with micro lenses, pipelined global shutter
Architecture
Pixel size
5.5 μm (H) x 5.5 μm (V)
Active pixels
2048 (H) x 1088 (V)
2048 (H) x 2048 (V)
2/3”
1”
Optical format
Quantum eficiency
Spectral response curve normal monochrome and NIR optimized camera (Fig. 1)
Spectral response curve color camera (Fig. 2)
Anti Relection Coatings
Anti relection coating or
Not available
removable cover glass are optional
Shutter eficiency
1: 50000
Camera Link Base, 2 and 3 tap (see page 4)
Interface
Acquisition frame rate (full frame)
Output frame rate (full frame)
169 fps (buffered image acquisition)
90 fps (buffered image acquisition)
76 fps at 2 tap Camera Link
40 fps at 2 tap Camera Link
114 fps at 3 tap Camera Link
60 fps at 3 tap Camera Link
0.06 Lux฀s (monochrome)
Sensitivity at sensor surface
0.14 Lux฀s (color, green only)
(typical)
Readout noise
13 e-
Full well capacity
13.5 ke- (max)
Linear dynamic range
60 dB
(HDR and HiQ mode for dynamic range extension and noise reduction)
No Blooming or Smear
Blooming and Smear
Analogue to digital conversion
Figure 1.
2048 On-chip 10 bit A/D-converters
Spectral response curve monochrome camera
Figure 2.
(Preliminary by sensor manufacturer)
Adimec Advanced Image Systems B.V
Qs-series Issue 1.0
Spectral response curve color camera
(Preliminary by sensor manufacturer)
-2-
July 2012
Qs-series Revision 1.1
Product Specifications Qs series
Functionality
Acquisition
Qs-4A60
Qs-2A120
Image Acquisition
Continuous or externally controlled (triggered). Image acquisition timing is fully separated from the
output interface by means of a real-time FIFO buffer. This supports burst mode acquisition
Digital Fine Gain selectable between 1x and 8x in steps of 0.01
Gain
Memory
FIFO buffer of 24 full size images
Intergration time control
FIFO buffer of 12 full size images
Programmable between 12 μs and 100 ms in units of 1 μs
(continuous mode)
Processing
2x, 4x (N.A. in color version)
Digital Binning
Defect Pixel Correction
Advanced defect correction, 100 defect correction map capacity
Flat Field Correction
Offset and gain correction per pixel
3 sets user programmable
Averages multiple images (max. 6) in-camera and outputs a single image at full or ROI resolution
HiQ mode
Shot noise improvement up to 8 dB (see igure 3)
HDR mode
Sensor multislope (knee) function enhancing
Scene Dynamic Range up to 90 dB (non-linear)
ROI
Fully programmable ROI in horizontal and vertical direction
Frame speed increases proportionally with ROI in vertical direction
Mirroring
Selectable horizontal and vertical mirror
10-bit output LUT, fully user programmable
Video compression
Service & Miscellaneous
Test mode
Internal test pattern generator available for checking the complete digital image chain
User storage
Availability of storage for 16 signed integers and 16 strings of 32 characters
Image tagging
Attaches digital information to an output image
Camera ID
Camera type, build state and serial number can be read via software
Customization
All Qs models are customizable to it speciic system outline and/or functionality requirements
120
70
Qs-2A120
CL 3tap
80
60
40
20
0
0,0
3,0
4,8
6,0
7,0
7,8
Signal to Noise Ration improvement (dB)
1
2
3
4
Number of frames in average
5
Qs-4A60
60
CL 2tap
Maximum acquisition speed (fps)
Maximum acquisition speed (fps)
100
6
CL 3tap
CL 2tap
50
40
30
20
10
0
0,0
3,0
4,8
6,0
7,0
7,8
Signal to Noise Ration improvement (dB)
1
2
3
4
Number of frames in average
5
6
Figure 3: Shot noise improvement versus maximum frame speed.
Adimec Advanced Image Systems B.V
Qs-series Issue 1.0
-3-
July 2012
Qs-series Revision 1.1
Product Specifications Qs series
Interfacing
Qs-4A60
Qs-2A120
Video
Video output
Output resolution
Interface clock
Camera Link base, 2 or 3 tap (user programmable)
8 or 10 bit ( 2 tap only) (user programmable)
66/85 MHz (user programmable)
Connector
1x 3M HMDR 26
Camera Control
Interface
Camera Link
Baud rate
57600
ASCII based
Protocol
I/O
Output
Strobe signal (user programmable)
Input
Trigger signal (programmable polarity)
Connector
Binder series 712 type 09-0412-30-04
Power
10 - 24 Volt +/- 10%
Input voltage
Typical power dissipation
4.5W @ 12 Vdc at full speed
Reverse voltage protection
Power connector
Yes
Binder series 712 type 09-0403-30-02
Mechanical
Mounting
Lensmount
2 mounting holes per side on camera front
Standard C-mount with back focus adjustment possibility
Outline
See igure 4
Weight
295 g ± 10%, excluding lensmount
Figure 4: Outline drawing
Adimec Advanced Image Systems B.V
Qs-series Issue 1.0
-4-
July 2012
Qs-series Revision 1.1
Product Specifications Qs series
Sensor Mounting Accuracy
+/- 0.1 mm (see igure 5)
XY-centering
Rotation
+/- 4 mrad (see igure 6)
Optical distance
+/- 0.3 mm (see igure 7)
Perpendicularity
+/- 2 mrad (see igure 7)
26.25 ±0.1 mm
Top
±4 mrad
Bottom
26.25 ±0.1 mm
Figure 5. XY-Centering
Figure 6. Rotation
Figure 7. Optical distance and Perpendicularity
Environmental
Operating
Qs-4A60
Qs-2A120
-10°C to +40°C
Temperature
Humidity (relative)
Shock
Vibration
20% - 80% RH, non-condensing
10 g, half sine shape, 6-10 ms duration
3 g, sinusoidal vibration sweeps 5-150 Hz
Storage
-25°C to +65°C
Temperature
Humidity (relative)
Shock
Vibration
5% - 95% RH, non-condensing
25 g, half sine shape, 6-10 ms duration
10 g, sinusoidal vibration sweeps 5-150 Hz
Compliance & Reliability
RoHS
2002/95/EC
Directive
CE-mark
Electromagnetic compatibility
Generic standard
2004/108/EC
EN61000-6-4 and EN61000-6-2
Reliability
MTBF
Adimec Advanced Image Systems B.V
Qs-series Issue 1.0
> 75,000 h @ 40°C
-5-
July 2012
Qs-series Revision 1.1
p r o d u c t
o v e r v i e w
QUARTZ series
CMOS cameras for metrology & inspection
Product highlights
• 2, 4 & 12 Megapixel Resolutions
• Global shutter CMOS technology
• Up to 340 full frames per second
• 12 dB noise reduction
• Cable length over 130 meters
Performance. Accuracy. No compromises
The Adimec QUARTZ series is our most versatile line of high-performance cameras, offering a complete
range of capabilities for a variety of applications. Based on our proprietary Adimec True Accurate
Imaging® technology and state of the art global shutter CMOS sensors, the QUARTZ family delivers the
performance you need with no compromises in measurement accuracy.
Ideal for metrology and inspection equipment, and for moving from 2D to 3D inspection, the QUARTZ
series can be tailored for your speciic requirements.
Inline Inspection and Metrology
In demanding machine vision systems, there’s no room for errors.
Put the power of True Accurate Imaging to work for you, and get the
results you need: high dynamic range, high sensitivity and high image
uniformity.
QUARTZ Series - Throughput enhancement without compromises
Accuracy with speed
No more trade-offs
Most cameras force you to make a trade off between
performance and accuracy. Not Adimec. We know
leading-edge systems need speed and precision so we deliver
both through our unique Adimec True Accurate Imaging®
technology*.
Flat ield correction
To improve and simplify image uniformity,
all QUARTZ cameras are calibrated in
the factory with lat ield correction.
This embedded function also supports
in ield calibration to compensate for
non-uniformity in the optical path and
lighting non-uniformities of the application.
The QUARTZ series can store up to 40
calibrated sets to allow fast switching
during operation between different
lighting-optics setups. This off-loads the
processing needs on the frame grabber
and simpliies the development effort at
system integration.
Leveraging the performance of sophisticated CMOS sensors,
and enhancing them with unmatched uniformity, even for a
large ield of view, QUARTZ is the complete solution for all
your machine vision needs.
Faster speeds without higher
costs
The image burst acquisition functionality
of the QUARTZ series allows image
buffering up to the maximum sensor
frame rate, while outputting data at the
maximum frame rate of your Camera Link
or CXP frame grabber, simultaneously!
Unsurpassed speeds with ROI
The QUARTZ support ROI (Region of
Interest) directly on the sensor. This
enables frame rates to almost 800 fps at
VGA resolution.
The ROI functionality allows optimal
ine tuning between speed and ield of
view.
Achieve higher speeds than twisted pair
and get the convenience of video, power,
commands and control over one cable, all
in a low-cost cabling solution.
This unique memory functionality
allows higher transmission processing
performance without having to upgrade to
more expensive frame grabbers.
200
Burst
No burst
120
100
500
400
60
300
40
200
20
100
CL
10 tap
CL
8 tap
2x CXP6
1x CXP6
2x CXP3
0
170
150
150
130
130
110
110
90
90
70
50
0
Horizontal pixels
70
1024
Without lat ield correction
2048
With lat ield correction
50
0
1024
Without noise reduction
2048
With noise reduction
Normal mode
HDR mode
Adimec’s success in the industrial camera market, particularly
in high performance machine vision applications where image
quality and consistency is essential, has been achieved through
a proprietary technological innovation that we call True Accurate
Imaging.
100
600
80
0
125
700
140
190
170
Why are Adimec cameras so special?
800
160
190
High Dynamic range
The QUARTZ Series supports both
linear and non-linear dynamics range
improvements. The linear method enables
capturing scenes with a dynamic ranges
up to 72 dB, resulting in less noisy images
and the ability to image a more contrast
rich scene with linear detection response.
The non‑linear HDR (High Dynamic
Range) function, captures scenes with
up to 90 dB dynamic range onto the 60
dB range of the sensor via a user‑deined
non-linear response mapping.
150
900
4 mpx
8 bit video output
180
Go further with CoaXPress
Adimec’s QUARTZ series is the industry
irst to implement the CoaXPress
interface, based on eficient and lexible
coaxial cable. CoaXPress enables longer
cable lengths (over 130 meters) and a
more robust connection than other digital
interfaces.
Grey levels
Speed with accuracy
Shot noise reduction
QUARTZ cameras provide improved shot
noise performance and sensitivity via
user‑conigurable binning or HiQ (High
Image Quality) functionality. Both functions
support a shot noise improvement up to
12 dB. With 2 directional binning, shot
noise is improved while keeping the
maximum frame speed. With HiQ mode,
shot noise is improved while keeping the
ield of view or selected region of interest.
Using ROI imaging in HiQ mode, speed
can be increased for smaller FOV’s.
75
50
25
0
12M
4M
2M
1M
Detailed information about other QUARTZ models are available on request.
*Adimec True Accurate Imaging is a trademark of Adimec Advanced Image Systems b.v., registered in the Benelux.
For more information about Adimec True Accurate Imaging, please visit our website www.adimec.com
VGA
CL
10 tap
CXP6
CXP3
It enables us to deliver superior performance, consistency, and
value for the most advanced imaging needs. It is based on years
of experience working with leading OEMs in machine vision,
medical imaging, and outdoor imaging to deine and reine
optimized solutions for their needs.
CMOS cameras for metrology & inspection
Models
(Detailed speciications are available on request)
Q-2A340
Q-4A150
Q-4A180
Q-12A65
Sensor
CMOS
CMOS
CMOS
CMOS
Pixel size
5.5 µm
5.5 µm
5.5 µm
5.5 µm
Resolution
2048 x 1088
2048 x 2048
2048 x 2048
4096 x 3072
Optical sensor size
2/3”
1”
1”
APS-C
Video output
Camera Link
Camera Link
Camera Link
Camera Link
(Base/Medium/Full or Deca)
(Base/Medium/Full or Deca)
(Base/Medium or Full)
(Base/Medium/Full or Deca)
CoaXPress
CoaXPress
(CXP3/CXP6)
(CXP3/CXP6)
Max frame rate
340 fps (CL)
340 fps (CXP)
157 fps (CL)
180 fps (CL)
180 fps (CXP)
66 fps (CL)
Max frame rate
150 fps (CL)
340 fps (CXP)
80 fps (CL)
80 fps (CL)
180 fps (CXP)
27 fps (CL)
Sustained @ 8 bit full resolution
Sustained @ 10 bit full resolution
Speciications
41 mm
(Applicable for all Quartz models)
Dynamic range
60 dB (90 dB in HDR mode)
Shot noise improvement
12 dB (Additional to sensor)
Electronic shutter
Global shutter (high shutter eficiency)
Image acquisition
Continuous / Controlled
Output resolution
8 or 10 Bit
Monochrome / color
Available Monochrome / Color (Bayer RGB) / NIR**
Power input
10.2 - 27.6 Vdc
Operating temperature
-10°C to +40°C
Testing
Every camera is 100 % tested on all speciications
Reliability
MTBF > 75,000 h @ 40°C
Weight
400 g (Excluding lensmount)
Lensmount
Available with:
C-,T2- or M42 Mount (for 2 & 4 Megapixel versions)
T2-, M42-, F- or TFL-II Mount (for 12 Megapixel versions)
Compliance
CE, ROHS
Functions & features
•
•
•
•
•
Region of interest
Burst mode
Flat field correction
Programmable I/O
HiQ mode (averaging)
•
•
•
•
•
80 mm
80 mm
High dynamic range mode
Mirroring
Internal & external triggering
Video LUT
Anti reflection coatings
**Q-12A65: On request
Pushing the limits
Adimec
With over 20 years of experience, we make our
Adimec is the leading supplier of high-end cameras for machine vision,
customers more competive by manufacturing
medical and outdoor imaging applications. Its patented Adimec True
cameras that are optimally tailored to their
Accurate Imaging technology forms the foundation for its broad range of
application. We are commited to delivering the best
camera products, and brings new levels of precision and accuracy to vision
camera solution possible to our customers.
systems. Adimec supports its products with customized and expert service
to systems developers around the world.
For maximum image quality, performance, and reliability in demanding applications - Choose Adimec
North America
Phone: (+1) 781-279-0770
Fax:
(+1) 781-279-0571
E-mail: salesus@adimec.com
Europe
Phone: (+31) 40-2353920
Fax:
(+31) 40-2353925
Email: saleseu@adimec.com
Japan & Korea
Phone: (+81) 3-5968-8377
Fax:
(+81) 3-5968-8388
E-mail: salesjp@adimec.com
LFL QUARTZ series ver.1.2 - Feb. 2014 - Detailed information on request - Subject to change without notice
Asia ‑ Paciic
Phone: (+65) 6334-1236
Fax:
(+65) 6334-1436
E-mail: salesap@adimec.com
www.adimec.com
p r o d u c t
o v e r v i e w
SAPPHIRE series
Ultra high resolution cameras for machine vision
Key speciications
• 25 mpx at 32 fps
• CMOS global shutter
• Semi‑automatic uniformity calibration by Active Sensor Control
• Compact design & low power consumption
Description
The S‑25A30 is a 25 megapixel CMOS global shutter camera and delivers images of 5120 x 5120
pixels at 32 fps over Camera Link. Using the standard Region of Interest function the frame rate can
be increased, e.g. 100 fps at 8 Mpx. Embedded real‑time pixel processing minimizes blemishes and
maximises uniformity. The combination of Adimec image quality, form factor and low power usage
makes the camera ideal for inspection systems that require high resolution to increase in throughput
or accuracy.
Adimec
Adimec is the leading supplier of high‑end cameras for machine
vision, medical and outdoor imaging applications. Our Adimec True
Accurate Imaging® technology forms the foundation for a broad
range of camera products, and brings new levels of precision and
accuracy to vision systems.
Ultra high resolution cameras for machine vision
Speciications
Dimensions
S-25A30
Sensor
CMOS, VITA 25K
Optical size
35 mm
Pixel size
4.5 µm x 4.5 µm
Resolution
5120 x 5120 pixels
Max frame rate
32 fps
Dynamic range
53 dB
Electronic shutter
Global shutter
Image acquisition
Continuous / controlled / triggered
Video output
Camera Link (Full / Deca), 66 or 85 Mhz
Output resolution
8 or 10 bit
Monochrome / color
Monochrome / Color (Bayer RGB)
I/O interface
Programmable strobe output and trigger input
Power input
10.2 ‑ 27.6 Vdc
Region of interest
32 user programmable ROIs with up to 5k pixels per line
Defect pixel correction
Yes, optimized for large area scan and ROI usage
Power dissipation
6.5 W
Operating temperature
‑10°C to +40°C
Testing
100 % tested on all speciications
Reliability
MTBF > 75,000 h @ 40°C
Weight
400 g (Excluding lensmount)
Lensmount
M42, T2, F‑Nikon and TFL‑II lensmount
Compliance
CE, RoHS
All speciications are typical at 25ºC unless otherwise speciied
Active Sensor Control
At Adimec we invest heavily in understanding sensors and its characteristics. With
over 20 years of experience in managing and tuning sensors in industrial cameras we
developed Active Sensor Control. This technology automatically deals with sensor
artifacts for optimal images but can also be ine tuned for an optimal it in accurate
inspection and metrology applications.
Without
With
Active Sensor Control
Active Sensor Control
Image taken with a uniform light source and 8x gain.
Semi-automatic calibration by Active Sensor Control
The Sapphire series has a practical and easy to use embedded semi‑automatic
calibration function. It calibrates the camera without involving up‑loading images to a
PC. This part of the internal Active Sensor Control eliminates typical large area scan
artifacts present in VITA 25K. With Active Sensor Control the 25 megapixel technology
can inally be used for accurate inspection and metrology applications.
What does Active Sensor Control do? :
• Minimize blemishes in VITA 25K
• Compensate for typical large area scan optical artifacts like shading
• Deal with typical sensor response related to timing and temperature
: Pixel blemish
For maximum image quality, performance, and reliability in demanding applications - Choose Adimec
North America
Phone: (+1) 781‑279‑0770
Fax:
(+1) 781‑279‑0771
E‑mail salesus@adimec.com
Europe
Phone: (+31) 40‑2353920
Fax:
(+31) 40‑2353925
E‑mail: saleseu@adimec.com
Japan & Korea
Phone: (+81) 3‑5968‑8377
Fax:
(+81) 3‑5968‑8388
E‑mail: salesjp@adimec.com
Asia - Paciic
Phone: (+65) 6334‑1236
Fax:
(+65) 6334‑1436
E‑mail: salesap@adimec.com
LFL SAPPHIRE series rev5 Sep. 2013 ‑ Detailed information on request ‑ Subject to change without notice ‑ Actual products may differ from photos
www.adimec.com