The Soft Styles

Transcription

The Soft Styles

The Soft Styles
SHOP COLLECTION
The Soft Styles
SHOP COLLECTION
Products Available
Roman Shades
Upholstered
Cornice Boards
Board Mounted
Valances
Pole Mounted
Valances
Drapery Panels
Decorative
Hardware
The Soft Styles
SHOP COLLECTION
Ordering Made Simple
Select Your Soft Treatments
• Roman Shades
• Upholstered Cornice Boards
• Board Mounted Valances
• Pole Mounted Valances
• Drapery Panels - our Sizing Solutions tables will determine what you’ll need to cover your windows
Select Your Fabric
• Over 130 choices. America’s best selling styles, including fashion fabrics, sheers and linings
• Also choose from a selection of Flame Retardant (FR) fabrics for residential, commercial and
hospitality applications
Select Your Lining
• Standard Lining
• Thermal Sateen Lining - recommended for Athena, Cohiba, and Silk fabrics
• Blackout Lining - recommended for Athena, Cohiba and Silk fabrics
Select Your Decorative Hardware
• Refer to pages 36 - 40 for Metal, Wood and Bamboo hardware choices
• Choose your rod pocket size if applicable
– 1 1/2” pocket is best for 3/4” rod sizes.
– 3” pocket is best for 11/4”, 13/8”, 17/8” and 2” rod sizes
Select Decorative Upgrades
• Add Cord and Fringe where appropriate
Motorized Roman Shades and Drapery Tracks available
Roman Shades
Roman Shades
Roman Shades
Roman Shades
Stacking Charts
Soft Fold
Plain
European
Flat Fold
Shade
Length
Approximate
Stack Length
Shade
Length
Approximate
Stack Length
Shade
Length
Approximate
Stack Length
Shade
Length
Approximate
Stack Length
24
7” – 8”
24
8” – 9”
24
7” – 8”
24
7” – 8”
36
7” – 8”
36
8” – 9”
36
7” – 8”
36
7” – 8”
42
7” – 8”
42
8” – 9”
42
7” – 8”
42
7” – 8”
48
7” – 8”
48
8” – 9”
48
7” – 8”
48
7” – 8”
54
7” – 8”
54
8” – 9”
54
7” – 8”
54
7” – 8”
60
7” – 8”
60
8” – 9”
60
7” – 8”
60
7” – 8”
62
7” – 8”
62
8” – 9”
62
7” – 8”
62
7” – 8”
66
7” – 8”
66
8” – 9”
66
7” – 8”
66
7” – 8”
7” – 8”
72
8” – 9”
72
7” – 8”
72
72
84
96
71/2”
–
81/2”
8” – 9”
84
96
81/2”
–
91/2”
84
9” – 10”
96
71/2”
–
81/2”
8” – 9”
84
96
• In the event that you want your outside mount shade to clear the window completely when raised, please use the
stacking charts above to help you calculate the appropriate stack length for your window measurement.
• Mounting Options
– Inside Mount: Factory takes 3/8“ deduction. Shades screw into the top of the window opening. There are no
brackets included.
– Outside Mount: Factory takes no deductions from customer measurements. Shades mount to the window or wall
with 1” L-brackets. There are no other bracket options.
• Choose Cord Position: Left or Right / Front or Back – there is an additional change for Cords Front.
• Lining: Standard Lining is included with all Roman Shades. For an additional charge, you may upgrade to Thermal
Sateen or Blackout lining.
7” – 8”
71/2”
– 81/2”
8” – 9”
Roman Shade Upgrade Options
The chart below will explain what roman shade options can be combined.
Continuous Cord Loop
Cords Forward
Top-down / Bottom-up
2 on 1 Head Rail
Continuous Cord
Loop (CCL)
Min 24” L;
21/2” headboard used
NOT
AVAILABLE
NOT
AVAILABLE
NOT
AVAILABLE
Cords Forward
(CF)
NOT
AVAILABLE
Coordinating cords
FORWARD tone into face
fabric. Valance comes
standard.
NOT
AVAILABLE
YES
NOT
AVAILABLE
Top-down /
Bottom-up (TDBU)
NOT
AVAILABLE
NOT
AVAILABLE
Comes standard with a
valance and cords BEHIND.
Left cord: TD; Right cord: BU.
NOT AVAILABLE in the
European style. Min size:
24”W x 24”L.
2 on 1 Head Rail
NOT
AVAILABLE
YES
NOT
AVAILABLE
Min width 48” wide
(Two 24” wide shades)
Oversized
Roman Shades 120”W x 120”L
RECOMMENDED
LEFT OPTION
NOT
AVAILABLE
NOT
AVAILABLE
YES. However, CCO is recommended. 2 on 1 Head Rail and
CCO are not available on the
same shade. Oversized 2 on 1
will have standard cord locks.
ead Rail is turned 90 degrees to fit slim
H
windows
Up-Ended Head
Rail
NOT
AVAILABLE
NOT
AVAILABLE
NOT
AVAILABLE
YES
Shades built on 3” head boards
Motorized
Roman Shades
NOT
AVAILABLE
NOT
AVAILABLE
NOT
AVAILABLE
YES
Roman Shades
Soft Fold
The soft flow of this style is created by hobbling the face fabric onto the lining
at regular intervals. This creates cascading soft folds at 6” intervals.
While still tailored, this style has a wonderfully soft feel. The flexibility of this
style lends itself to use with all kinds of fabrics from full-bodied heavy fabrics
to softer more lightweight ones.
Please note that when using a pattern with a large return, the pattern will be
interrupted at each pleat/fold.
No decorative trim upgrades available.
Size range
Minimum width 12” W
Maximum width 120” W
Minimum length 16” L
Maximum length 120” L
Fabric type
Any in collection
Lining
Standard lining included. Upgrade to Thermal Sateen or Blackout lining
Lifting System Upgrades
Top-down/Bottom-up (TDBU), Continuous Cord Loop (CCL) and Motorized
Side hems
2” single fold
Bottom hem
11/2” single fold
Returns
None
Mounting options
Inside mount or outside mount
Standard pleat size
Pleat drop: 61/4”
Bottom pleat size
From 11/2” to 7 5/8”. Multiple shade orders of different heights may not have the
same size bottom pleats
See page 48 for fabric care and maintenance instructions.
Roman Shades
Plain
This is a structured, contemporary look that requires minimal dressing. Stay
pockets on the back of the shade create pleats which look great with most
fabrics.
All fabrics look good with this style, but it should be noted that stay pockets
do interrupt the prints. This shade stacks very efficiently due to the stay
pockets.
Size range
Maximum height 120” L
Fabric type
Any in collection
Lining
Side hems
2” single fold
Bottom hem
11/2” single fold
Returns
None
Mounting options
Standard pleat size
Pleat drop: 111/2”. Folds to 5 3/4” when shade is raised
Bottom pleat size
From 51/4” to 16 5/8”. Multiple shade orders of different heights may not have the
same size bottom pleats
Roman Shades
European
The sides of the shade curve upward when the shade is raised. This softens
the entire look of the shade as the fabric gathers in random soft folds.
Casual softness with a sense of ease and comfort, the flexibility of this style
lends itself to use with all kinds of fabrics. From heavyweight prints and
textures to the most lightweight ones, all look wonderful in the relaxed style.
Small tack stitches used to attach the cord rings are visible on the
face of the shade. When first installed this style should be pulled up
fully and left in place several days to create “pleat memory”.
Size range
Fabric type
The following fabrics are not recommended in the European style: Gem,
Neptune, Wilmington, Silk and Shannon
Lining
Continuous Cord Loop (CCL)
Side hems
2” single fold
Bottom hem
1/2” double fold
Returns
None
Mounting options
Outside mount
Standard pleat size
4” pleat folds when shade is raised
Note:
Only available as Outside Mount.
Top pleat size
From 41/2” to 141/2”. Multiple shade orders of different heights may not have the
same size top pleats
Note fabric restrictions.
Note minimum width.
Scoop
Shades 60”W and under have 1 scoop
Shades wider than 60”W have 2 scoops
Be advised: This shade takes manual adjusting to achieve the desired effect.
It is not recommended for frequent use, but more as a decorative shade.
Roman Shades
Flat Fold
A simple, elegant, tailored design with no horizontal seams or stitching. This
tailored style is an excellent choice for fabrics with large scale patterns that
look best without interruption. When fully extended the entire pattern is
displayed.
Small tack stitches used to attach the cord rings are visible on the
face of the shade. When first installed this style should be pulled up
fully and left in place several days to create “pleat memory”.
Size range
Fabric type
Any in collection. Works well with patterns and large repeats
Lining
Side hems
2” single fold
Bottom hem
51/2” single fold
Returns
None
Mounting options
Standard pleat size
5” pleat folds when shade is raised
Top pleat size
From 41/2” to 141/2”. Multiple shade orders of different heights may not have the
same size top pleats
10
11
Upholstered Cornice Boards
Upholstered Cornice
Boards
Upholstered Cornice
Boards
Upholstered Cornice Boards
Tailored Cornice
Shaped Cornice
Arched Cornice
Modern Cornice
Featured:
Featured:
Featured:
Featured:
Tailored Cornice Board in
Ashton Stripe color Camel
Shaped Cornice Board in
Hamlet color Maraschino
Arched Cornice Board in
Neptune color Sage
Modern Cornice Board in
Cohiba color Sesame
Plain Roman Shade in
Gem color Desert
Plain Roman Shade in
Gem color Desert
• Upholstered Cornice Boards are made to the exact 1/2”
• 2 Returns available: 4” or 7”
• Upholstery fiber fill and decorative fabric are supported by an all
wood frame
• Lines of cornice shape will elongate with wider widths
• Length: 16” at longest point
” return is recommended for mounting over blinds
4
and shades
— 7” depth is recommended for mounting over drapery
treatments
—
• Includes 1/2” self cording along bottom edge. Upgrade to:
• Minimum width: 24”
Decorative cord or fringe on the bottom edge only.
13
Board Mounted Valances
Board Mounted
Valances
Board Mounted
Valances
Charisma & Elegance
Elegance
Charisma
Featured:
Featured:
Charisma Board Mounted Valance in Ophelia color Vintage
Elegance Board Mounted Valance in Neptune color Ebony with
Black / Camel fringe
• Includes 1/2” self cord at top edge
Soft Fold Roman Shade in Silk color Gold
• Board Mounted Valances are made
to the exact 1/2”
• This style is constructed with
3 pleats which will expand
proportionally as the board
width increases.
• Box pleat section drops to 22” long
• Cascades drop to 42” long
• Box pleats and upper portions of
cascades include Standard lining.
Lower cascade drop is self lined.
4” return is recommended for
mounting over blinds and shades
— 7” return is recommended for
mounting over drapery treatments
—
• Includes 1/2” self bias tape along
to the exact
1/2”
• Swags drop to 18” long
• Swags include standard lining
bottom edge. Upgrade to:
Decorative fringe or cord on the
bottom edge only.
• Includes 1/2” self cord at top edge
4” return is recommended
for mounting over blinds and
shades
— 7” return is recommended for
mounting over drapery treatments
—
• Includes 1/2” self bias tape.
Upgrade to: Decorative fringe or
cord on the bottom edge only.
• All Board Mounted Valances
come pre-assembled for ease of
installation.
15
installation.
Grace & Chantilly
Chantilly
Grace
Featured:
Featured:
Grace Board Mounted Valance in Silk color Blue Note
Chantilly Board Mounted Valance in Capulet color Spa with Chocolate /Spa fringe
• Board Mounted Valances are
made to the exact
1/2”
• Swags include Standard lining
• Cascades are self lined
• Style is assembled with a central
front swag with additional swags
spread out on both sides
• Cascades are mounted under
the swags
• Swag drops to 22”
” return is recommended for
4
mounting over blinds and
shades
— 7” return is recommended
for mounting over drapery
treatments
—
• Jabot drops to 12”
• Includes 1/2” self bias tape edge.
to the exact
1/2”
• Swags include Standard lining
• Cascades are self lined
self bias tape edge. Upgrade to:
Decorative fringe or cord on the
bottom edge only.
• Cascades drop to 36”
Upgrade to: Decorative fringe or
cord on the bottom edge only.
installation.
• Swag drops to 18”
for mounting over blinds and
shades
for mounting over drapery
treatments
• Swags and cascades include 1/2”
installation.
16
Whimsy & Gallant
Gallant
Whimsy
Featured:
Featured:
Whimsy Board Mounted Valance in Bramasole color Spa
Gallant Board Mounted Valance in Colburn color Mineral with Spa
Blue fringe
4” return is recommended for mounting over blinds and shades
— 7” return is recommended for mounting over drapery
treatments
—
• Board Mounted Valances are made to the exact 1/2”
• Standard length: 18”
• Pleat width will vary
• Includes 1/2” self bias tape. Upgrade to: Fringe or cord on the
• Board mounted valances include Standard lining
bottom edge only.
• All Board Mounted Valances come pre-assembled for ease
of installation.
17
Pole Mounted Valances
Pole Mounted
Valances
Pole Mounted
Valances
Waterfall Valances, Shaped Valances
•
68”W x 38”L
• Shirrs to approximately half the stated width on a
decorative pole
• Order one Waterfall Valance for every 23” of window
width to be covered
• Includes Standard lining. Upgrade to: Thermal Sateen
or Blackout lining.
• Pocket / Header options available:
—
—
11/2” Pocket / 11/2” Header
3” Pocket / 3” Header
• Includes 1/2” self bias tape edge and coordinating tassel. Upgrade to: Cord
or fringe on the bottom edge only.
Shaped Valance
• 52”W x 36”, 63”, or 84”L (each)
• Standard with self lining - no lining upgrades
• Use at the end of treatment
• Pair with Ascots or Waterfalls or use alone
—
—
• Includes 1/2” self bias tape edge. Upgrade to: Cord or
fringe on the bottom edge only.
Featured:
See page 48 for fabric care and maintenance
instructions.
Waterfall Valance and Shaped Valance in Killarney color Pecan
Rod Pocket Panels in Killarney color Pecan
28”-48” Antique Brass Rod Set with Ball finials
Note: D
ecorative Hardware is not included, but is available for
an additional charge.
19
Double Layer Scalloped Valances
• 78”W x 15”L from bottom of the rod pocket
• Order one Double Layer Scalloped Valance for every 40” of
window width
—
—
• Double Layer Scalloped Valances are
• Comes Unlined - no lining upgrades
available only in the following fabric
combinations:
— Bramasole/Capulet
— Killarney/Kildare
— Ophelia/Hamlet
• Double layer effect combines coordinating patterns
and colors
• Valances are sewn together at the rod pocket
• Shirrs to approximately half the stated width on a
decorative pole
• Includes trim in coordinating stripe or check 1/2” self bias tape
• No trim upgrades available
1
Featured:
2
3
5
6
7
9
10
11
Double Layer Scalloped Valance in Bramasole/Capulet color
Antique Gold
Note: D
20
4
8
Fabric Combinations:
1. Bramasole/Capulet
Antique Gold
2. B
ramasole/Capulet
Cabernet
3. B
ramasole/Capulet
Spa
4. B
ramasole/Capulet
Chocolate
5. K
illarney/Kildare
Garnet
6. K
illarney/Kildare
Ivory
7. K
illarney/Kildare
Pecan
8. O
phelia/Hamlet
Vintage
9. O
phelia/Hamlet
Viridian
10. O
phelia/Hamlet
Maraschino
11. Ophelia/Hamlet
Mocha
Ascot Valances - Blouson Valances - Tuck Valances
Ascot Valance
Blouson Valance
Tuck Valance
Featured:
Featured:
Featured:
Killarney color Garnet Ascots are shown over Kildare
color Pecan Ascots with Wine/Gold tassels
Colburn color Russet Blouson stuffed with tissue
paper is layered over Shannon color Sienna Blouson
in its flat state
• Tuck Valance in Capulet color Antique Gold
1 1/4” Bamboo Pole with Wyndham finials in Oak
• 78”W x 14”L from the bottom of the rod pocket
1 1/4” Bamboo Pole with Wyndham finials in Oak
• Order one Tuck Valance for every 40” of
• Order one Ascot Valance for every 20” of
window width
• Order one Blouson Valance for every 40” of
• Includes Standard lining. Upgrade to: Thermal
• Comes Unlined - no lining upgrades
—
—
window width
• Tubular pocket can be stuffed with tissue for pouf
effect or left flat for tailored effect
• Includes 1/2” self bias tape and coordinating tassel.
Upgrade to: Cord or fringe on bottom edge only.
• No tassel, cord, or fringe upgrades
— 3” Pocket / 3” Header
—
window width
• Includes Standard lining. Upgrade to: Thermal
• For best effect, use basic white valance rods for
this style
—
—
• Includes 1/2” self bias tape. Upgrade to: Cord or fringe
on the bottom edge only.
Note: Decorative Hardware is not included, but is available for an additional charge.
21
Scalloped Valances, Scarf Valances
Scarf Valance
Scalloped Valance
Photo
retouching
to come
Featured:
Scalloped Valance in Silk color Gold with Wine/Gold cord
and tassel
• Order one Scalloped Valance for every 40” of
window width
• Includes Standard lining. Upgrade to: Thermal Sateen
or Blackout lining.
Featured:
—
Scarf Valance in Silk color Gold with Wine/Gold fringe
• Includes 1/2” self bias tape and coordinating tassel. Upgrade
to: Cord or fringe on bottom edge only.
• 50”W x 144”L (4 yds) or 50”W x 216”L (6 yds)
Note: D
• Choose unlined or self lined
• Includes 1/2” self bias tape edge. Upgrade to: Fringe
along bottom and inside edge.
• Scarf Valances must be draped over decorative
22
hardware during installation to create the look
shown in the above picture.
23
Drapery Panels
Drapery Panels
Drapery Panels
Drapery Panels
Parisian Pleat Panels, Coordinating
Parisian Pleat Valances, Contoured Tiebacks
• Coordinating Valances are ordered separately and may be used
freestanding or inserted between panels
• 48” W x 18” L
• Order one Coordinating Parisian Pleat Valance for every 48” of window
width to be covered
• No trim upgrades available for Coordinating Valances
• Like panels, Coordinating Valances come unlined. Upgrade to: Standard
lining, Thermal Sateen or Blackout lining.
• All coordinated products made of the same fabric should use
the same lining
• Bottom hem is 11/2” and Side hems are 1/2”
Featured:
Parisian Pleat Panels in Silk color Gold with Thermal Sateen Lining
Contoured tiebacks in Silk color Gold
Plain Roman Shade in Silk color Gold
28”- 48” Antique Brass Rod Set with Ball finials
• 5”W x 33”L Contoured Tiebacks are ordered separately as a pair
• Tiebacks may be upgraded with decorative cord or fringe on the
bottom edge only
Note: D
Motorized Drapery Tracks available
25
Parisian Pleat Panels Sizing Solutions
Chart for use with decorative hardware and clip rings
Panel Widths Available
If your window
measures
up to:
24”W
36”W
48”W
60”W
72”W
84”W
# of Parisian Pleats per panel
5
8
11
14
17
20
# of rings needed per panel
7
10
13
16
19
22
2
24”- 48”W
2
49”- 72”W
73”- 96”W
2
Use this
# of Panels
97”- 120”W
2
2
121”- 144”W
2
145”- 168”W
Chart for use with traversing hardware
If your window
measures
up to:
24”W
36”W
48”W
60”W
72”W
84”W
# of Parisian Pleats per panel
5
8
11
14
17
20
# of pin hooks needed per panel
7
10
13
16
19
22
2
24”- 38”W
2
39”- 62”W
63”- 86”W
87”- 110”W
2
Use this
# of Panels
2
2
111”- 134”W
2
135”- 158”W
These Drapery Panels are sold as single panels in pre-set widths. Our Sizing Solutions recommendations allow for a minimum of
2.5:1 fullness and are intended as a guide to help in choosing the best pre-set width panels for your window area.
If less fullness is preferred, then:
Select your window width row on the Sizing Solutions chart and order the recommended panel width(s) and # of units from the ROW
ABOVE. This will give you less fullness. Or, consult your window coverings sales representative to choose which pre-set widths are
best suited to cover your window.
• Once you have determined the panel width and number of
panels needed to cover your window width, consult price
chart to choose specific length and determine price.
• Drapery Panels come unlined. Upgrade to: Standard Lining,
Thermal Sateen Lining or Blackout Lining.
• Bottom hem is 4”
• Side hems are 11/2”
• 6” long, triple fold pleats
• No decorative trim upgrades available for Drapery Panels.
• Longer lengths are available at a surcharge.
• Motorized Drapery Tracks available.
26
Drapery Panels
Rod Pocket Panels, Coordinating
Rod Pocket Valances, Contoured Tiebacks
• Coordinating Valances are ordered separately and may be used freestanding
or inserted between panels.
• 52” W x 15” L
• Order one Coordinating Rod Pocket Valance for every 30” of window width to
be covered
• Like panels, Coordinating Valances come unlined. Upgrade to:
Standard lining, Thermal Sateen or Blackout lining.
• All coordinated products made of the same fabric should use the same lining
• Bottom hem is 11/2” and Side hems are 1/2”.
— 11/2” Pocket / No Header
—
—
—
3” Pocket / No Header
Featured:
Rod Pocket Panel in Athena color Amethyst with Thermal Sateen lining
Rod Pocket Valance used freestanding in Athena color Amethyst
2” Smooth Pole with Ball with Leaves finials in White Gold
Note: D
• Tiebacks may be upgraded with decorative cord or fringe on the bottom edge only
27 See page 48 for fabric care and maintenance instructions.
Rod Pocket Panels Sizing Solutions
If your window
measures up to:
50”W
100”W
2
30”- 40”W
2
41”- 60”W
61”- 80”W
75”W
81”- 100”W
101”- 120”W
this #
of Single
Panels
2
Use
2 plus ➝
2
2
2 plus ➝
121”- 140”W
2 plus ➝
2
4
141”- 160”W
These Drapery Panels are sold as single panels in pre-set widths. Our Sizing
Solutions recommendations allow for a minimum of 2.5:1 fullness and are intended
as a guide to help in choosing the best pre-set width panels for your window area.
Select your window width row on the Sizing Solutions chart and order the
recommended panel width(s) and # of units from the ROW ABOVE. This will give
you less fullness. Or, consult your window coverings sales representative to choose
which pre-set widths are best suited to cover your window.
• Once you have determined the panel width and number of panels needed
to cover your window width, consult price chart to choose specific length
and determine price.
• Pocket/Header options available:
— 11/2”
pocket / 11/2” Header
— 3” Pocket / No Header
28
Drapery Panels
Grommet Panels, Coordinating
Grommet Valances, Contoured Tiebacks
• Coordinating Valances are ordered separately and may be used
freestanding or inserted between panels.
• 50” W x 18” L
• Order one Coordinating Grommet Valance for every 25” of window width
to be covered
• Like panels, Coordinating Valances come unlined. Upgrade to: Standard
lining, Thermal Sateen or Blackout lining.
Featured:
Grommet Panel and Valance in Gem color Sienna
28”-48” Satin Nickel Rod Set with Dover finials
• Tiebacks may be upgraded with decorative cord or fringe on the
bottom edge only
Note: D
29
Grommet Panels Sizing Solutions
If your window
measures up to:
50”W
100”W
2
30”- 40”W
2
41”- 60”W
61”- 80”W
75”W
81”- 100”W
101”- 120”W
this #
of Single
Panels
2
Use
2 plus ➝
2
2
2 plus ➝
121”- 140”W
2 plus ➝
2
4
141”- 160”W
• Once you have determined the panel width and number of panels needed
to cover your window width, consult price chart to choose specific length
and determine price.
• Polished nickel grommets - 21/2” diameter
30
Drapery Panels
Tab Top Panels, Coordinating
Tab Top Valances, Contoured Tiebacks
• 50” W x 18” L
• Order one Coordinating Tab Top Valance for every 33” of window width
to be covered
Featured:
Tab Top Panels and Valance in Wilmington color Navy
11/4” Bamboo Pole with Wyndham finials in Oak
• Tiebacks may be upgraded with decorative cord or fringe on the bottom
edge only
Note: Decorative Hardware is not included, but is available for
31
Tab Top Panels Sizing Solutions
If your window
measures up to:
24”- 60”W
50”W
Use
61”- 100”W
101”- 140”W
this #
of Single
Panels
75”W
100”W
2
2
2
Solutions recommendations allow for an approximate minimum of 1.5:1 fullness
and are intended as a guide to help in choosing the best pre-set width panels for
your window area.
• Once you have determined the panel width and number of panels
needed to cover your window width, consult price chart to choose
length and determine price.
• 4”L x 2”W tabs are spaced approximately 9” from tab center to next
tab center
32
Drapery Panels
Back Tab Panels, Coordinating
Back Tab Valances, Contoured Tiebacks
• 50” W x 18” L
• Order one Coordinating Back Tab Valance for every 25” of window width to
be covered
Featured:
Back Tab Panel in Shannon color Glacier
Flat Fold Roman Shade in Wilmington color Natural
28”-48” Satin Nickel Rod Set with Dover finials
• Tiebacks may be upgraded with decorative cord or fringe on the bottom
edge only
Note: D
33
Back Tab Panels Sizing Solutions
If your window
measures up to:
50”W
100”W
2
30”- 40”W
2
41”- 60”W
61”- 80”W
75”W
81”- 100”W
101”- 120”W
this #
of Single
Panels
2
Use
2 plus ➝
2
2
2 plus ➝
121”- 140”W
2 plus ➝
2
4
141”- 160”W
• Once you have determined the panel width and number of panels
needed to cover your window width, consult price chart to choose
length and determine price.
• 4”L x 2”W tabs are spaced approximately 9” from tab center to next
tab center
34
Drapery Panels
Sheer Rod Pocket Panels
Featured:
Sheer Rod Pocket Panels in Crepe color Ivory Parisian Pleat Panels and Valance in Silk color Gold
Plain Roman Shade in Wilmington, Cream
Note: D
ecorative Hardware is not included, but is available for an additional charge.
35
Sheer Rod Pocket Panels Sizing Solutions
If your window
measures up to:
Approx 58”W
Approx 87”W
2
24”- 48”W
2
45”- 72”W
73”- 96”W
97”- 120”W
121”- 144”W
Approx
117”W
this #
of Single
Panels
2
Use
2
2 plus ➝
2
2 plus ➝
145”- 168”W
2 plus ➝
169”- 192”W
2
4
Solutions recommendations allow for a minimum of 2.5:1 fullness and are
intended as a guide to help in choosing the best pre-set width panels for your
window area.
you less fullness. Or, consult your window coverings sales representative to
choose which pre-set widths are best suited to cover your window.
• Once you have determined the panel width and number of
panels needed to cover your window width, consult price
chart to choose specific length and determine price.
• Voile has seamless widths
• Crepe has seamed widths beyond 58” wide
No additional lengths available in Voile.
36
11/2” pocket / 11/2” Header
— 3” Pocket / No Header
—
37
Decorative Hardware
Decorative Hardware
Decorative Hardware
Metal Hardware
• 3 Rod Set Sizes
• 7 Finial Styles
• 3 Finishes
Dover Finials
Georgian Finials
Ball Finials
Hampton Finials
Pearl Finials
Metal finials (2)
Metal finials (2)
Metal finials (2)
Metal finials (2)
Polyresin finials (2)
Length
Diameter/width
Packaged
31/2”
27/8”
pair
Length
Diameter/width
Packaged
Rod Set Sizes
Length
28” - 48”
48” - 86”
86” - 120”
Antique Brass
37/8”
211/16”
pair
Length
Diameter/width
Packaged
31/8”
21/4”
pair
Length
Diameter/width
Packaged
3 5/8”
2”
pair
Length
Diameter/width
Packaged
Square Finials
Scroll Finials
Polyresin finials (2)
Metal finials (2)
3 5/8”
211/16”
pair
Length
Diameter/width
Packaged
3”
27/16”
pair
Length
Diameter/width
Packaged
31/8”
27/16”
pair
End Caps
# of Brackets
for Under Rods
2
3
4
Packaged
pair
40” Extension Rod &
One Standard Bracket
Projection is 3” to the back of the rod
& 41/2” to the front of the rod
Packaged
1 each
Rings
with Clips
Satin Nickel
Packaged
7 each
End Cap
Oil Rubbed
Bronze
5” Extension Bracket
Ext. to Back of Front Rod
Packaged
61/4”
5”
21/2”
39
Double Bracket
Ext. to Back of Front Rod
To Back of Rear Road
Packaged
Double Bracket
5”
1 each
5”
21/2
1 each
Wood Hardware
All finials are hand finished polyresin
• 3 Pole styles
Spiral
• 8 Finial styles
• 2 Sizes
• 5 Finishes
Lengths Available
4 ft. Length
6 ft. Length
Note: An extra center support bracket is
recommended for 6’ and 8’ pole lengths
4 3/4” 3 3/4” each
13/8” Poles
37/8” 2 3/8” pair
2” Poles
51/8” 31/4” each
13/8” Poles
4 3/8” 21/4” pair
2” Poles
51/2” 31/8” each
13/8” Poles
3 5/8” 21/2” pair
2” Poles
4 3/4” 31/4” each
Filigree
Ball
13/8” Poles
3”
2” Poles
41/4” 31/2” each
Swirl
Flame
13/8” Poles
4 3/8” 2 3/8” pair
2” Poles
51/2” 31/8” each
13/8” Poles
3 5/8” 21/2” pair
2” Poles
4 3/4” 31/4” each
13/8” Poles
3 3/4” 21/4” pair
2” Poles
51/8” 31/8” each
Fluted
Cone
Walnut
Vintage White
White Gold
3 5/8” 21/2” pair
2” Poles
Mushroom
8 ft. Length
Oak
13/8” Poles
Ball With
Leaves
Tulip
Mahogany
Pine Cone
Pagoda
40
Ball With Leaves
Mushroom
Fluted Cone
Tulip
Filigree Ball
Swirl Flame
Pine Cone
Pagoda
Packaged
decorative
wood poles
Fluted and Smooth
Wood Poles come in
13/8” & 2” diameter
Spiral Wood Poles come in 13/8”
diameter only
Diameter /Width
finials
Fluted
Length
Smooth
21/2” pair
Bamboo Hardware
• 2 sizes
• 3 Finial styles
• 2 Finishes
Bamboo Style Wood Poles
come in 11/4” & 17/8” Diameter
Lengths Available
Mahogany
4 ft. Length
Oak
6 ft. Length
8 ft. Length
Heathrow Finial
Madras Finial
Packaged
Length
Wyndham Finial
Diameter /Width
Note: An extra center support
bracket is recommended for 6’ and
8’ pole lengths
Wyndham
Finial
11/4” Poles
41/4” 21/2” pair
Heathrow
Finial
17/8” Poles
Madras
Finial
11/4” Poles
3”
1 ” Poles
5 ” 37/8” each
for 1 ” poles only!
1/4
51/4” 41/2” each
for 1 ” poles only!
7/8
7/8
41
1/2
21/4” pair
Wood & Bamboo Accessories
each
2” & 17/8” Poles
91/4”
6” front
21/4” back
each
13/8” & 11/4” Poles
7 each
13/8” & 11/4” Poles 13/16” 111/16” pair
2” & 17/8” Poles
4 each
2” & 17/8” Poles
Brackets, Rings and End Caps are for use with the Bamboo and Wood collections
42
Packaged
81/8” 4 5/8”
pair
Diameter /
Width
2” & 17/8” Poles
5” front
21/8” back
End
Caps
Length
pair
7”
Rings
Packaged
31/2”
Packaged
Packaged
51/2”
13/8” & 11/4” Poles
Extension to
back of pole
Extension to
back of pole
13/8” & 11/4” Poles
Single
Brackets
Double
Brackets
Extension to
front of bracket
Extension to
front of bracket
brackets, rings & end caps
11/2” 27/16” pair
43
How to Measure
How to Measure
How to Measure
The Soft Styles
SHOP COLLECTION
How To Measure
Measure carefully using a steel tape measure to assure accuracy.
Roman Shades
Drapery Panels
Inside Mount
The Roman Shade will hang within
the window frame Providing a clean,
built in look.
ALL PANELS ARE SOLD AS SINGLE PANELS NOT IN PAIRS.
They come in pre-set widths and are made to length to the 1/2”
Width:
Measure the width of the window area you’d like to cover.
Minimum window depth
required: 1-1/2”.
Take time to plan your installation and get the measurements correct.
Measure: Width – in 3 places (
top, middle & bottom) & use the
narrowest dimension.
We recommend adding an additional 4”-6” to each side from the edge of
the window glass.
This allows the drapery panels, when pulled to their sides, to clear the
window allowing more natural light in.
Length – in 3 places (left, center &
right) & use the longest dimension.
Consider the decorative hardware
you’ll be using to hang the
panels from.
Outside Mount
The Roman Shade will hang outside
the window frame or molding.
Finials add another of 6-8” (3”4” for each finial on both ends
of the pole) to the total space of
window/wall area you’ll need.
To be used when there is not enough
window depth for an inside mount.
Mount to surrounding wall, ceiling or window frame/molding
Consult our SIZING SOLUTIONS
charts for selecting the correct
pre-set panel width and number
of panels to order.
No minimum window depth required.
Measure: The width & length of window area you want to cover.
If space allows, we recommend adding 1”-11/2” of width and height to each
side of window (2”-3” total) to reduce light penetration from edges of shade.
Our recommendations allow for
fullness that is already built into
the panels.
45
How to Measure (continued)
EXAMPLE:
Window height = 84” L
Length:
Finished panel length is
measured from the top of
drapery panel to the bottom. It
includes the rod pocket (either
11/2” or 3”, but does not include
the header), grommets, pleats
or tabs (either on back or top of
panel).
Mount Hardware 4” above window = 88” L using 11/4” bamboo hardware
uses Small Wood Rings to attach to panel = − 21/2” = 851/2” L panel
851/2” L panel - 1/2” floor clearance = 85” L
This must be factored into your length measurements.
Consider the additional height
you will gain when hanging the
panels from decorative poles.
Sheer Undertreatment Lengths:
It is recommended that when sheers are being used as an undertreatment,
they be ordered with NO HEADER and shorter in length than the Drapery
Panels they will be mounted under. Mount sheer drapery hardware
1” lower than the decorative hardware used for the outer panels and
measure down to floor, but about 1/2” shorter than the drapery panel
length chosen. This way the sheer’s top edge and bottom hem clear the
tops and bottoms of the outer drapery panels.
It is recommended to mount the
pole approximately 4” above the window frame.
Drapery Panel Length Advice:
You can specify any length desired to the 1/2”
If the panel is being mounted directly onto a pole through the rod pocket,
grommets or tabs, no additional length is added.
Floor Length panels should be 1/2” above the floor for easy operation.
The finished panel length you
provide to the 1/2” will be the
exact measurement the drapery
panel will be made to.
Puddle Length panels should have another 6”-10” of length to pool the
fabric on the floor. This length is not recommend for high traffic areas or
drapery that needs to be opened and closed often.
When using clip rings to attach Rod Pocket or Parisian Pleats to a
pole, note that clip rings will add approximately 2”-4” of length.
Therefore, subtract that extra length from the final length of the panel
to be ordered.
11/4” Metal rings add 23/4” of length
Pole Mounted Valances are sold as pre-set sizes in single units.
11/4” and 13/8” small Wood rings add 21/2” of length
Each style has a unique shape & size.
17/8”
We suggest to order 1 valance for every X “ of window width depending
on the style.
and 2” large Wood rings add
31/4”of
length
As with the Drapery Panels, consideration must be given to the hardware
the valances will be hung from. The window/wall width you’ll need to
cover and the extra length that clip rings will add to the valance.
46
How to Measure (continued)
Board Mounted Valances And Upholstered Cornice Boards
REMINDER:
2 return (depth) sizes are available:
These styles have Pre-set drop lengths. No lengths are to be specified.
They’re made to the 1/2” width.
• 4” for mounting over blinds and shades
For Upholstered Cornice Boards:
Add a total of 2” to the trim to
trim/window edge to window edge
measurement to compensate for the
width of the wood sideboards + the
fiberfill batting.
• 7” for mounting over drapery treatments.
Decorative Hardware Poles For Mounting Drapery
Panels & Valances
Measure the window/wall area you want to cover with drapery panels/
pole mounted valances.
EXAMPLE:
For a tight to window frame fit:
We recommend mounting hardware 4” above and 4”-6” beyond each
side of the window frame, if space allows.
If window width is 100” wide add 2”.
102” wide outside will be 100” inside the cornice box.
REMINDER:
Clip rings will add 2”-4” of length to your panels. Refer back to Drapery
Panels: Length section for more details.
For Board Mounted Valances:
NO extra inches needed
The top wood board used equals the exact width specified. NO wood
side boards are used in these styles, fabric hangs off the edge of the
top board.
Then consider adding an additional 1-6” to each side for either Board
Mounted Valances or Upholstered Cornice Boards over OUTSIDE
mounted UNDERTREATMENTS like drapery panels (including the
drapery hardware width) or blinds/shades. Take that measurement as
your total width and then follow the instructions above.
47
The Soft Styles
SHOP COLLECTION
Care Instructions
The packaging and shipping of soft treatments frequently results in
minor wrinkling of the fabrics used.
100% Polyester:
• If necessary, steam polyester or gently iron on a low heat setting
to remove stubborn wrinkles. 100% Polyester fabrics release
wrinkles easily. Steam or iron on the Polyester / Synthetic Fabrics
setting (Low), but be aware that Polyester will melt if the iron is
too hot.
There are different characteristics and handling needs for the
variety of fabrics offered in this program.
Please refer to the descriptions below for guidance on how to
remedy minor wrinkles upon delivery.
Cotton/Poly blends:
First, allow all items to hang for a few days so wrinkles relax and
begin to fall out.
• If necessary, gently iron on a Blended Fabric (Medium) setting to
Silk fabrics:
• Natural irregularities give the fabric its unique and desired
character. The appearance of slubs, nubs, loops and barre ridges
are universally accepted as normal and should not be considered
defects.
• Silk should be lined with Thermal Sateen or Blackout lining to
avoid colorfading.
• If necessary, steam silk to remove stubborn wrinkles. Please note
that a good quality steamer is needed so water spots won’t form
from water spitting out from the steaming device.
100% Cotton and 100% Linen:
• If necessary, gently iron on a Cotton (High) setting to remove
stubborn wrinkles.
remove stubborn wrinkles.
General Cleaning Guidance:
• Dry Cleaning is the best method to clean soiled soft window
treatments.
• However, on 100% Polyester, Cotton/Poly blends and 100% Cotton
or 100% Linen you may: Spot clean with warm soapy water using
mild detergent and a clean sponge. Air-dry and then steam or iron
as guided above.
Rayon/Poly blends:
• If necessary, steam rayon/poly to remove stubborn wrinkles.
Please note that a good quality steamer is needed so water spots
won’t form from water spitting out from the steaming device.
48
Glossary
Ascot valance
Decorative top treatment that is shirred on a rod, known for its
triangular shaped drop.
Cornice
Decorative treatment at the top of a window usually made of wood.
Upholstered cornice boards are constructed of fabric and
upholstery batting covering a wood box-like structure used to
neatly frame windows, add architectural interest and hide hardware
used for undertreatments.
Back tab
Hidden tabs on the back of each panel through which a drapery rod
is inserted to create a tailored drapery effect of soft, neat folds.
Cotton
Natural fiber manufactured from seeds of the cotton plant. Fabric is
soft, sturdy and cleans easily.
Blackout lining
Heavyweight fabric made from a poly/cotton blend with acrylic
foam on the backside of the cloth. It blocks out light and provides
excellent sun fading protection for decorative fabric.
Double layer scalloped valance
Double layer effect combines coordinating fabrics and colors.
Scalloped edge detail creates a tailored, yet easy-going style.
Blend
Fabric containing two or more different fibers. The dominant fiber
content is listed first.
Draperies
Fabric window coverings that can be stationary, or draw open and
closed. Typically, they are heavier than curtains and are often pinch
pleated, opaque or lined.
Blouson valance
Decorative top treatment that is open at both ends so the layers can
be pulled apart to form a pouf.
Finial (fin-ee-ul)
An ornamental piece used at the ends of drapery rods.
Board mounted valance
Shape and define windows with this shortened drapery treatment
hung above the window frame. Softly shaped fabric is secured to a
wood frame for an enduring visual effect and easy installation.
Grommet
Metal rings pressed into fabric drapery panels through which a
drapery rod can be inserted. An alternative to clip rings and rod
pockets, grommet top panels create a sleek sophisticated look with
precise folds.
Box pleat
Double pleat, with cloth folded under on both sides. A common
heading style for draperies, pleats are evenly spaced and stitched
into place at regular intervals.
Header
The portion above the rod pocket in draperies, curtains, and
toppers.
Cascade
A vertical spilling or fall of fabric in a spiral or flat-pleated design.
Often used with swag draperies. Also called a jabot or tail.
Inside mount
A window covering designed to fit and be mounted inside the
window frame.
Clearance
In window treatments, the measurement from the back rod
to the wall.
Jabot
Decorative vertical finish to a horizontal festoon or swag.
Sometimes called a cascade or tail.
49
Glossary (continued)
Layering
Using multiple window treatments, one upon the other, to create
a fashionable window ensemble and maximize insulating benefits
without undue heaviness. Layering window treatments makes a
window look professionally designed while increasing functionality.
Pole mounted valance
Any valance treatment with a rod pocket, tabs, grommets or pleats
that can be mounted directly onto a decorative rod or attached to a
rod by clip rings.
Linen
A natural fiber made from the flax plant. Fabric is cool, strong and
highly absorbent.
Polyester
Synthetic fiber often used as a blend with other fibers such as
cotton or rayon. Known for crease-resistance and minimal care
qualities.
Nylon
Synthetic fiber produced from petroleum products. Heat-setting
properties provide stability, low shrinkage and resilience.
Privacy lining
Lightweight 100% polyester or cotton/polyester blend fabric which
adds body, opacity and resistance to sun fading.
Outside mount
A window covering designed to fit and be mounted outside the
window frame.
Rayon
Synthetic silk-like fiber made of regenerated cellulose. Fabric is
lustrous, drapes well and dries quickly.
Overlap
The part of a drapery panel that overlaps in the center when closed.
Repeat
The measurement between a point in the design of a fabric and the
next point where it begins again.
Pair
Two panels of curtains or draperies, sold together.
Return
The distance from the face of the rod to the wall or casing where
the bracket is attached.
Panel
One half of a pair of draperies.
Rod pocket
A stitched-down, hollow tunnel at the top of a curtain, for rod
insertion. Pocket allows fabric to be shirred or gathered onto
the rod.
Parisian pleats
A new twist on a classic drapery treatment. Parisian pleats are 6”
long, triple-folded pleats tack stitched closer to the top of drapery
for a long elegant pleated effect. Combine with clip rings and
mount on decorative hardware for a contemporary version of an
established classic style.
Roman shade
Flat-faced fabric shade that forms pleats as it is raised.
Pleat
A fold of cloth evenly spaced and stitched into place.
Scalloped valance
An undulating edge treatment that creates a dramatic scalloped
shape. Can be dressy or casual depending on fabric choice.
Scarf
In window coverings, a long piece of light fabric loosely draped or
wrapped on a rod or pole.
50
Glossary (continued)
Shaped valance
Pair of fabric treatments cut on an angle on the inside edge to
create softly shaped folds when shirred onto a drapery rod.
Thermal backed
This feature offers additional insulation for windows where outside
temperatures, draft and noise can be more noticeable. With acrylic
foam-backed draperies, there is no need for an additional liner.
Sheers
Any group of very transparent fabrics such as crepe, voile, etc.
Thermal sateen lining
A medium weight cotton or cotton/polyester blended fabric,
constructed of lustrous long yarn floats for a smooth sheen finish
and backed with acrylic latex foam. The insulating foam protects
homes from heat and cold and damaging UV rays which can cause
furniture and carpeting to fade.
Shell
The outer covering of a piece of drapery or apparel, as opposed to
the lining or insulation.
Shirr
Inserting a rod into a rod pocket in a gathering motion. This builds
fullness in a curtain, pole top drapery or non-stationary valance.
Tieback
Strip of fabric or other material used to hold a drape to the side of
a window.
Side hem
The folded and finished edge along the sides of a curtain panel.
Top treatment
A decorative window treatment of many varieties that is often used
to cover hardware from an undertreatment.
Silk
A natural fiber reeled from silkworm cocoons. Fabric is lustrous,
lightweight and drapes well.
Tuck valance
A fabric sewing technique where pleats are formed and stitched at
regular intervals. Upon mounting on a drapery rod and shirring to
half its width, the tucked-in pleats form balloon like poufs.
Stackback
The amount of space a drapery occupies when drawn open.
Allowing for stackback provides exposure of more window
glass, especially desirable for a pleasant view or additional light.
Stackbacks can also make a window look larger.
Undertreatment
Layers under the top drapery or curtain. May include blinds,
shades, sheers or semi-sheers.
Swag
Fabric piece that is folded and draped to hang in a semicircle at
the top of a window. Similar to a scarf, but a more formal,
constructed shape.
Valance
A horizontal, decorative, fabric treatment used at the top of the
window. A valance can be used alone to hide hardware or as an
embellishment on top of draperies. Also called a top treatment.
Tab top
A panel or valance with straight loops (tabs) sewn to the top for
hanging on a decorative rod or pole.
Waterfall valance
A fabric sewing technique where deep folds of fabric are sewn into
a U shape, creating a waterfall or cascade effect.
51
52

The Soft Styles

Transcription

Similar documents

Valance Box Pleat Tailored

Tuftex PVC Liner Panel

Atkar Kardinia International College Katsumata Centre

Diane von Furstenberf for Kravet Collections

Inspiring Surface Design

Dukono - Carlyle Collective

SFH6590 - Solray - Radiant Heating Panels

Window Fashion Vision 1.2010

Brochure - Terrafix Geosynthetics Inc.

Now, more ways to make our furniture yours. Find out more at the