Individual and distinctive!

Transcription

Individual and
distinctive!
With new forms
and materials
unique jewellery
creations evolve.
MY CREATIVE WORLD!
GB
Knot technique
Overhand knot
Simple hanging
Weaver knot
Movable catch
Winding knot
Waving knot
Description Title:
Chain „Brazil“
16 112 606 Plastic metallic olive
with grooves, 5 pc.
16 104 606 Plastic metallic bowl, 4 pc.
89 213 05 Cotton cord, 12 m
17 052 000 Capiz ball, Africa, 3 pc.
12 089 210 Bayong wooden bead,
olive, 3 pc.
pillow, 3 pc.
pillow, 2 pc.
12 090 210 Wooden bead blossom, 1 pc.
12 090 284 Wooden bead blossom, 2 pc.
1.Work with 12 threads (à 1 m)
of the cotton cord. Always
separate 2 threads to thread the
beads alternating in irregular
distances. After each threaded
bead set an overhand knot with
5 or 7 threads of the cotton cord.
2.After ca. 60 cm close with a
big knot above all threads and
set at each side twice winding
knots with a length of ca. 2.5 cm.
3.Attach the lock.
Chain „Cuba“
51 691 01
12 088 543
12 088 284
12 089 543
12 089 284
14 067 01
14 052 01
Cotton cord, 4 m
Bayong wooden bead,
pillow, 3 pc.
Bayong wooden bead, pillow, 3 pc.
Bayong wooden bead, olive, 5 pc.
Bayong wooden bead, olive, 3 pc.
Indian beads, 25 pc.
Glass sticks, 160 pc.
1.Craft 14 cm of waving
knot and always include after
1.5 cm one Indian bead.
Thread alternatively a wooden
bead “pillow” and 3 Indian
beads until you have threaded
six wooden beads “pillow”.
Set an overhand knot.
Craft again 14 cm of waving
knot and thread Indian
beads symmetrically to the
first part.
2.Fix the lock.
3.Hang wooden beads “olive”
that are threaded on cotton cord
and glass stick strings between
the 3 Indian beads.
4.For the glass stick strings
lay jewellery wire (ca. 15 cm)
one half each side over the
chain, thread a crimp on both
ends of the jewellery wire and
push it up until a short loop
results, press the crimp.
Thread the glass sticks on
jewellery wire. Set a crimp.
Chain “Zebra”
17 058 000
17 053 000
15 077 606
12 093 543
21 556 22
55 216 05
89 213 05
83 000 05
Capiz olive, zebra, 1 pc.
Capiz ball, zebra, 2 pc.
Metal jewellery element,
helix, 2 pc.
Abaca bead Chip, 2 pc.
Tubular pendant
with loop, 1 pc.
Organza ribbon, 2 m
Cotton cord, 3,2 m
Micro suede, 1,5 m
1.Work with a micro suede (1 m),
an organza ribbon (1.5 m) and a
cotton cord (3 m). Find the middle
of all materials and thread on all
3 strings to the tubular pendant
with loop. Set an overhand knot at
the left and right hand side.
Thread the cotton cord through
the loop to its middle so that half
of 20 cm hang on each side and
fasten part of the organza ribbon
(= 10 cm) at the loop with a knot.
2.Thread with those 3 strings
through the Capiz olive zebra and
set an overhand knot at the end of
the olive together with the second
part of the organza ribbon.
3.Set after 3 cm sideways of the
tubular pendant with loop another
knot and thread a silvery spiral with
the cotton cord and close with an
overhand knot. Set a winding knot
with the cotton cord. Thread a capiz
ball zebra on the cotton cord, set an
overhand knot. Thread an abaca bead
on the cotton cord, set an overhand
knot, after 2 cm another, after 3.5 cm
the last.
4.Craft the other side of the chain
in the same way, just change the
silvery spiral and the abaca bead.
5.Include a movable catch.
Chain “Africa”
Chain “Zebra”
83 009 02 Round laces of oxhide, 1 m
83 018 02 Round laces of goatskin, 1 m
83 001 01 Braided leatherette
tape, 0,4 m
15 072 606Jewellery-rectangle,
metal, 3 pc.
15 077 606Metal jewellery element, helix, 1 pc.
15 066 576Jewellery-ellipse, metal, 1 pc.
15 068 576Jewellery-ellipse, metal, 1 pc.
12 088 316Bayong wooden bead,
pillow, 2 pc.
12 090 316Wooden bead blossom, 1 pc.
17 051 000Capiz ball, blossom, 1 pc.
17 056 000Capiz olive, blossom, 1 pc.
15 082 606Metal jewellery element,
disc 1 pc.
17 016 100 Pearly jewellery element: disc, 1 pc.
Chain „Southafrica“
14 331 100 Glass wax bead:
Pebble, 1 pc.
14 281 318 Swarovski polished
beads crystal, 4 pc.
15 071 606 Jewellery-ring, metal, 1 pc.
14 350 316Glass wax bead
Baroque, 1 pc.
21 559 22 Plain coil chain,
oval, 0,5 m
21 243 21 Ring, 12 pc.
21 653 21 Conn. piece for
leather strings, 4 pc. 1.Lay round laces of oxhide
fourfold. Hook the jewelleryrectangle at the closed end
and at the other loop the
jewellery-ring. Bind the open
end together with the loop
by setting a winding knot.
2.Adorn a jewellery-rectangle
on each side with winding
knots, one syringe, one lilac.
Merge the loose ends of the
lilac cord and fix them with
a winding knot. Thread a
capiz olive blossom.
Put the round laces of goatskin
through the resulted triangle.
Make a loop and fix it in the
required interspace to the
jewellery-ring. For this use
a lilac cotton cord and make
a winding knot.
3. Bond the different jewelleryelements with rings or winding
knots. Thread the braided
leatherette tape through it,
place a brass anchor chain and
fix it at the chain.
4. Hook the oval plain coil chain.
12 093 543
17 054 000
17 059 000
15 082 606
15 083 606
17 015 392
17 015 390
21 556 22
15 049 000
15 063 000
55 216 05
83 000 03
89 213 02
51 691 07
Abaca bead
Chip, 2 pc.
Capiz ball,
stripes, 3 pc.
Capiz olive, stripes, 1 pc.
Metal jewellery element, disc, 1 pc.
Metal jewellery element, oval, 1 pc.
Pearly jewellery element:
disc, 2 pc.
Pearly jewellery element:
disc, 1 pc.
Tubular pendant with loop, 1 pc.
Horn imitation ball, 1 pc.
Horn imitation cylinder,
1 pc.
Organza ribbon, 1,2 m
Micro suede, 1 m
Cotton cord, 3 m
Cotton cord, 1,5 m
1.Work with 4 strings of
white cotton cord (2.75 m),
1.3 m of a turquoise cotton
cord, 0.8 m of a micro suede
and 1 m of an organza
ribbon.
2. Ascertain the middle of
the ribbons and thread the
tubular pendant with loop.
Hook threaded beads in the
loop which are fixed at
cotton cord with winding
and overhand knots.
3. Thread the organza ribbon
through the loop as well.
Include different jewelleryelements (always on cotton
cord) at the left and right side
from the middle to the top.
Always set a winding knot
with the white cotton cord
between the beads. After
ca. 30 cm on each side close
with a movable catch.
Chain “Seychelles”
Jolina jewellery-elements
17 082 …
Pearly wooden element, pentagon, ø 25 mm
15 077 606 Metal jewellery element,
helix, ø 25 mm
17 083 …
Pearly wooden element, hexagon, ø 35 mm
ornament, 45 x 30 mm
17 055 000 Capiz ball, flame,
ø 20 mm
9 x 20 mm
17 051 000 Capiz ball, blossom,
ø 20 mm
9 x 30 mm
17 052 000 Capiz ball, africa,
ø 20 mm
10 x 37 mm
17 053 000 Capiz ball, zebra,
ø 20 mm
25 x 27 mm
17 077 000 Capiz olive, flame,
18 x 45 mm
33 x 43 mm
17 056 000 Capiz olive, blossom,
18 x 45 mm
61 332 00
17 057 000 Capiz olive, africa,
18 x 45 mm
Knot Pro – the perfect
aid made of wood for
creative jewellery
knots. 53x23 cm
17 058 000 Capiz olive, zebra,
18 x 45 mm
12 093 …
Abaca bead Chip,
25 x 30 mm
12 091 …
Bayong wooden bead
asymmetric,
ø 14 x 17 mm
12 092 …
Abaca bead lens, ø 20 mm
12 090 …
Wooden bead
blossom, ø 30 mm
12 089 …
Bayong wooden bead,
olive, 10 x 40 mm
12 088 …
Bayong wooden bead,
pillow, 18 x 23 mm
17 054 000 Capiz ball, stripes,
ø 20 mm
17 059 000 Capiz olive, stripes,
18 x 45 mm
Combine with our rich
jewellery assortment.
Use in addition to the
list of material, jewellery
catches, jewellery wire,
crimps, chain stitches and
jewellery pins.
83 002 01 Braided leatherette tape, 0,8 m
21 556 22 Tubular pendant with loop, 1 pc.
83 000 03 Micro suede, 0,12 m
21 383 62 Brass anchor
chain, 0,07 m
21 652 21 Conn. piece for leather strings, 2 pc.
12 058 318 Tiger Buri bead, 2 pc.
12 089 543Bayong wooden bead, olive, 1 pc.
21 240 22 Jewellery pin with decorative head,
1 pc.
14 334 990Glass wax bead: Fancy Cut, 1pc.
15 071 606 Jewellery-ring,
metal, 1 pc.
21 243 21 Ring, 1 pc.
21 109 21 Jewellery pins, 3 pc.
21 180 01 Chain catch, 1 pc.
Art.Nr. 96 806 00
www.rayher-hobby.de

Individual and distinctive!

Transcription

Similar documents

Neu: Perlmutt Nouveau: nacre New: pearly Nieuw

ELLINO ECKLA CES