Service profile of Lufttechnik Gransee

Transcription

A JACOB GROUP company
The ventilation specialists at Lufttechnik Gransee GmbH plan, design, produce and install systems
for process air, ventilation, and environmental technology.
The basic components for these top-grade dust removal, exhaust extraction and bulk goods handling
systems are provided by JACOB’s easy-to-install pipework system, with its outstanding series production
quality. The company’s expertise ranges from standard solutions through to complex special constructions.
These are manufactured using modern technical equipment in a production area measuring more than
3,000 square metres.
Increasingly, Gransee is establishing itself within the JACOB group as the preferred location for
customised production and larger diameters.
This specialisation is to be further developed whilst JACOB Porta Westfalica focuses more on series
production alone. Gransee’s specialised performance is to be the vanguard with respect to group synergies.
Proven and dependable in-house products are a further core competency of Gransee’s individual and
small-lot production. Project references covering 20 years of market experience underline the company’s
expertise in providing solutions for plant component construction, and especially for ventilation systems.
Lufttechnik Gransee offers a wide spectrum of sizes, special sizes, types of metal, and quality grades.
With its customised components and small-scale series, Gransee has established a strong economic
position in niche markets. The company uses small-lot production and individuality to its advantage in a
market where the large series-production companies have difficulty in competing due to their high level of
automation. Versatile and quick, creative and competent, efficient, practical and experienced.
The customer receives what large series production companies are no longer able to provide: a tailored
response to the individual wishes and requirements of the customer.
www.lufttechnik-gransee.de ++
Headquarters
Fr. Jacob Söhne GmbH & Co. KG
JACOB PIPEWORK SYSTEMS
Germany
www.lufttechnik-gransee.de
Niedernfeldweg 14
D-32457 Porta Westfalica
Phone +49 (0)571 9558-0
++
www.lufttechnik-gransee.de
post@jacob-rohre.de
www.jacob-rohre.de
Core Competencies of Lufttechnik Gransee
Industrial waste management pipework, Lüneburg
Air inlet/outlet tower for children’s day-care centre
Rotary sieve for cleaning tobacco
Headquarters
Germany
Shut-off valve
Niedernfeldweg 14
Phone +49 (0)571 9558-0
post@jacob-rohre.de
www.jacob-rohre.de
Industrial pipework system for waste management
Expansion joint
Designer letterbox
Deflector hoods circular/square
Headquarters
Germany
Transitions/shut-off valve
Exhaust pipe for hospital
Air outlets
Niedernfeldweg 14
Phone +49 (0)571 9558-0
post@jacob-rohre.de
www.jacob-rohre.de
________________________
Urban art, water and light features
Air source outlet in hospital foyer
Sound-insulated tower
Headquarters
Germany
Ventilation systems
Flow channel for university
Niedernfeldweg 14
Phone +49 (0)571 9558-0
Ventilator
post@jacob-rohre.de
www.jacob-rohre.de
Overview of the diverse range of services within the
core area of expertise of products for ventilation systems
Custom-made pipe systems
Individual solutions in plant construction
Planning, design, manufacture and installation of complete, energy-optimised facilities for process air
systems such as dust extraction, wood chip extraction, recyclable residual products, filtered products,
extraction of vapours and gases.
Optimised facilities for ventilation and air-conditioning in buildings such as homes, offices, hospitals,
laboratories or multi-purpose halls.
Well-engineered components, manufactured in-house, for ventilation facilities
Gransee’s strength lies in its creative flexibility in individual and small series manufacture.
This applies to the widest range of shapes and sizes, with base materials of all types and
grades of metal, as well as to all the special parts and pipes from JACOB’s modular pipework system.
The production of ventilation products is focused mainly on products for pipework, extraction and
blow-out hoods, weather protection grilles and suction and blow-out structures.
Headquarters
Germany
Niedernfeldweg 14
Phone +49 (0)571 9558-0
post@jacob-rohre.de
www.jacob-rohre.de
Deflector hoods (circular/square)
Expertly designed air blow-out hoods, as round or square models.
More advanced designs than with the simple roof-mounting principle.
Protective grille and two drainage systems (interior and exterior cones) to prevent leaves
and water from entering the pipe system.
Air outlets through roofs
Connection piece for easy installation and tightly sealed joints.
Expertise model with or without rain collar.
Headquarters
Germany
Niedernfeldweg 14
Phone +49 (0)571 9558-0
post@jacob-rohre.de
www.jacob-rohre.de
Source air outlets
Stylish air-conditioning and ventilation. Here: an example from the Rathenow hospital.
Sound dampers for pipes or ducts in ventilation systems
Expertise model as special design with outer and inner pipe.
The sound damper for pipes incorporates a sound-absorbing lining.
Available with flange or pull-ring connections.
Sound insulation frames/Duct silencers
Expertise model with rectangular design and
four-hole connecting frame for air duct profiles.
Alternative model, flow profiles.
Headquarters
Germany
Niedernfeldweg 14
Phone +49 (0)571 9558-0
post@jacob-rohre.de
www.jacob-rohre.de
Venturi tube
Expertise model to allow flow measurement for aggressive and non-aggressive gases,
vapours and liquids where minimum loss of pressure is paramount.
Process air monitoring.
Inlet/outlet air hoods
Expert model with cylindrical or box design. Easy to install/push on,
using pull-ring or flange connection.
Mainly used in industry, but also suitable for residential buildings,
for example via resellers, roofing contractors.
Headquarters
Germany
Niedernfeldweg 14
Phone +49 (0)571 9558-0
post@jacob-rohre.de
www.jacob-rohre.de
Air inlet/outlet towers
Expertise model, with outlet head in six alternative designs.
Attractive appearance.
Often used in office complexes and in many industrial buildings.
Weather protection grilles
The perfect solution for the unobtrusive, elegant and tightly sealed exchange of heat and air.
Particularly suitable for public buildings or protected historic buildings, but also for stylish industrial buildings.
Expertise model for wall or roof installation with a variable inclination of 0° to 60°.
Secure even without covering frame. Special details available to the customer's specification.
Headquarters
Germany
Niedernfeldweg 14
Phone +49 (0)571 9558-0
post@jacob-rohre.de
www.jacob-rohre.de
Cyclone dust separators
Expertise model with pull-ring or flange connection, for use in the timber,
plastics and tobacco industries, for example, for separating and sorting
(wood chips, plastic particles and other products, dust collection from tobacco leaves and similar).
A particularly exceptional expertise: steel art products
Here once again, Gransee is open to the customer’s ideas!
Interesting competencies and references for special products and small-series custom products
for fountains (urban art), rain measurement (“Tretjakoff” measurement containers), designer gas
meter housings (the only known manufacturer) and other artwork.
Headquarters
Germany
Niedernfeldweg 14
Phone +49 (0)571 9558-0
post@jacob-rohre.de
www.jacob-rohre.de
Laser cutting
Complex laser cutting, up to a size of 4 x 2 m and a weight of 1250 kg.
With material thicknesses of up to 20 mm for steel, 15 mm for stainless steel, and 10 mm for aluminium.
•
Laser engraving
•
Pipe cutting facility for pipes 160 mm in diameter,
6 m in length, and with a maximum weight of 250 kg
CAD service
The ventilation specialists at Gransee are open to the customer’s ideas and requirements.
They can create designs or manufacture in accordance with CAD files provided by the customer.
Lufttechnik Gransee GmbH
Am Gewerbepark 16
16775 Gransee
DEUTSCHLAND
Tel: + 49 3306 79603
Fax: + 49 3306 796059
info@lufttechnik-gransee.de
http://www.lufttechnik-gransee.de
Your contact:
Bernd Starke
Managing director
Roland Ludwig
Sales / Technical
Version: 2011-02-23MT/TM
Headquarters
Germany
Niedernfeldweg 14
Phone +49 (0)571 9558-0
post@jacob-rohre.de
www.jacob-rohre.de

Service profile of Lufttechnik Gransee

Transcription

Similar documents

debut ep “a piece of me” available on itunes

Enough at Tea Time - Common Sense with Paul Jacob

press release

Mass MeMbership 2014 Jacob Javits center

Max Jacob, exhibition - New York Art Resources Consortium

The Picture of Their Life #1

EUROPLAST – NYCAST GmbH Emergency

TEXT (SMS) Marketing

Syntho-Glass