17 - Custom Bikes by Mike

Transcription

General
17
17
For the Dealer Nearest You, Call: 800-729-3332
17.01
RevTech® Synthetic MTP
Extensive field and laboratory tests with
RevTech® Synthetic MTP 20W50 demonstrated:
Superior protection against engine wear
Enhanced lubrication in extreme conditions
Outstanding viscosity stability
Excellent heat protection
General
-
RevTech® Synthetic MTP
New from RevTech® is a lubricant so advanced, it provides superior performance
in V-Twin motors, transmissions, and primaries. Our full synthetic base oil and
proprietary RevTech® additive package provide viscosity stability, film strength,
and anti-oxidation characteristics unmatched by conventional base oils.
RevTech® Synthetic MTP is intended for use as motor, transmission, and primary
case lubricant for Evolution® and Twin Cam 88® Big-Twin models. It is also
intended for use as motor and primary case lubricant for Buell® and Evolution®
Sportster® models. Consult your owner’s manual for proper fill capacities and
drain intervals. When using RevTech® Synthetic MTP, do not top off with another lubricant unless RevTech® Synthetic MTP is not available, then change fluid as
soon as possible.
RevTech® Synthetic MTP meets all warranty performance criteria for HarleyDavidson® motorcycles and its use does not void new vehicle warranties.
Sold in convenient resealable one quart plastic bottles with a transparent oil
level gauge to show exactly how much oil has been used. Meets API CI-4/SL
service levels.
635004 SAE 20W50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.49 each
17
17.02
Prices appearing in this catalog are Suggested Retail Price and are subject to change*
RevTech® Pure™ Oil
Available in Economy
One Gallon Containers!
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
t Oil ter!
a
e
r
G t Bet
Go
ow
Just ech® Oil n-4/SL
RevT API C I g!
n
s
Exhaust
i
t
mee rvice rat
se
Intake
• Contains 90% less corrosive acids
• Reduces sludge formation by
more than 50%
• Resists oxidation (thermal degradation)
up to three times longer
Engine
Gaskets
RevTech Pure™ Advanced Motorcycle Lubricant
Conventional base oil
Hydro-cracked base oil
Custom Chrome’s new refining process almost completely removes
contaminates, creating a base oil* that’s so pure, that it’s clear.
*RevTech® proven additives give RevTech PURE™ it’s honey color.
RevTech Pure™ is the most advanced motor lubricant available for HarleyDavidson® motorcycles. It is formulated using the revolutionary Hydro-cracking refining process which creates greater hydrocarbon consistency and
further removes contaminants. The resulting base oil is so pure, it is clear.
This ultra-pure base oil provides synthetic-like performance from a petroleum
oil. Hydro-cracked oils extend engine life by generating 90% less corrosive
acids than conventional motor oils. They also maintain lubrication integrity
by reducing sludge formation by more than 50%, and resisting oxidation
(thermal degradation) up to three times longer. Using this base oil and our
proven RevTech® additive package, our engineers have formulated RevTech
Pure™ to withstand the unique demands of air cooled V-Twin engines,
whether new or old. RevTech Pure™ meets all warranty performance
criteria for Harley-Davidson® engines and its use does not void
new vehicle warranties. Sold in convenient resealable one quart plastic
bottles. Owners of Harley-Davidson® motorcycles demand the best, and
RevTech Pure™ delivers. Meets API CI-4/SL service levels.
Sold in cases of 12 (1 quart bottles).
35300
SAE 10W40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.39 each
35301
SAE 20W50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.39 each
35302
SAE 25W60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.39 each
35303
Grade 50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.39 each
35304
Grade 60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.39 each
35305
Grade 70 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.39 each
35306
SAE 20W50 (1 gallon container) case of 4 . . . . . . . . . . . . .$16.99 each
635001 SAE 20W50 (55 gallon drum) . . . . . . . . . . . . . . . . . . . . . . . .$699.00 each
3551420 55 gallon container pump . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.95 each
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
17.03
Cross
Reference
RevTech® Oil
RevTech 20W50
Available in
Economy
One Gallon
Containers and
55 Gallon Drums!
Just Great Oi
l
G
RevT ot Bett
e
er
®
ch
mee
ts A Oil now !
serv PI C I-
4
ice r
ating /SL
!
General
SUGGESTED USAGE GUIDE
SAE 10W40 Multiviscosity
Recommended for use in all Harley-Davidson® Evolution® engines, climatic
temperature range between 10° and 50° Fahrenheit
temperature range between 30° and 100° Fahrenheit
temperature range between 50° and 110° Fahrenheit. Also recommended
in pre-Evolution® Harley-Davidson® engines, climatic temperature range
between 30° and 100° Fahrenheit
Grade 50 Straight weight
Recommended for use in all pre-Evolution® Harley-Davidson® engines,
climatic temperature range between 60° and 100° Fahrenheit
Recommended for use in all pre-Evolution® Harley-Davidson® engines,
climatic temperature range between 80° and 100° Fahrenheit
Recommended for use in all pre-Evolution® Harley-Davidson® engines which
are well-worn and are ridden in areas where the climatic temperature
range is between 80° and 100° Fahrenheit
17
RevTech® Oil
Developed exclusively for Custom Chrome® by a major U.S. oil company,
RevTech® Oil is formulated to meet the demands of Harley-Davidson®
V-twin engines. RevTech® Oil has anti-wear characteristics that extend
engine life and protect against oil breakdown at high temperatures.
Shear-resistant polymers cushion moving parts while fighting friction.
Special additives are designed for API CI-4/SL performance to combine the
attributes of both automotive gasoline and diesel engine oils. RevTech® Oil
contains ingredients which helps prevent valves from sticking, and retards
the formation of sludge, varnish and rust in the engine. Compatible with
other petroleum lubricants, available in SAE 50, Grade 60 and Grade 70
straight weights as well as 10W40, 20W50 and 25W60 multigrades to meet
the needs of all Harley-Davidson® V-twin engines, new or old. RevTech® Oil
meets all warranty performance criteria for Harley-Davidson®
engines and its use does not void new vehicle warranties. Sold in
convenient resealable one quart plastic bottles with a transparent oil level
gauge to show exactly how much oil has been used. Owners of HarleyDavidson® motorcycles demand the best, and RevTech® Oil delivers. A premium grade oil test-proven to go the distance, and available only from
Custom Chrome®. Sold in cases of 12 (1 quart bottles).
35049
SAE 10W40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.75 each
35052
SAE 20W50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.75 each
35048
SAE 25W60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.75 each
35050
SAE 50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.75 each
35051
Grade 60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.75 each
35053
Grade 70 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.75 each
35043
SAE 20W50 (1 gallon container) case of 4 . . . . . . . . . . . . .$14.49 each
635002 SAE 20W50 (55 gallon drum) . . . . . . . . . . . . . . . . . . . . . . . .$599.00 each
Note: RevTech® Oil was formulated expressly for use in Harley-Davidson® V-Twin engines.
Six weights are available, permitting selections to match your particular engine type and
temperature conditions.
17.04
RevTech® Lubricants
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
35076 Shown with Oil Change Helper
Lighting
RevTech Pure Oil Change ‘Convenience Packs’
™
RevTech® Oil Change ‘Convenience Packs’
Quick and easy, neat and clean oil change packs combine three quarts of
RevTech® 20W50 oil with a short, long or extra-long chrome RevTech®
Magnetic Oil Filter for the maximum protection you can give your
Harley-Davidson®. Sold in dealer master cartons of four oil change packs
each (oil filter not recommended for use on Twin Cam 88® models).
35070 With long chrome RevTech® magnetic oil filters (CC #35078)
for all 5-speed models (except Dyna Glide models) from
1980 thru 2000, late 1984 thru 2003 Sportster® models, and
all Softail® models from 1984 thru 2000, as well as most
Harley-Davidson® accessory oil filter kits . . . . . . . . . . . . . . . . .$22.99 each
35071 With extra-long chrome RevTech® magnetic oil filters
(CC #35079) to fit Sportster® models from 1984 thru 2003,
all Dyna Glide models 1991 thru 2000 and all Big Twin
models from 1992 thru 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.99 each
35072 With short chrome RevTech® magnetic oil filters (CC #35077)
to fit 1980-early 1984 Sportster® models, and 4-speed
Big Twins from 1982 thru 1986, except Softail® models . . .$20.99 each
RevTech®
Lubricants
Everything needed in one easy to carry package, combining three quarts
of RevTech Pure™ 20W50 oil with a short, long or extra-long chrome
RevTech® Magnetic Oil Filter for the maximum protection you can give your
Harley-Davidson® motorcycle. Sold in dealer master cartons of four oil
Electrical
change packs (oil filter not recommended for use on Twin Cam 88® models).
®
35315 With long chrome RevTech magnetic oil filters (CC #35078)
for all 5-speed models (except Dyna Glide models) from
1980 thru 2000, late 1984 thru 2003 Sportster® models, and
all Softail® models from 1984 thru 2000, as well as most
Exhaust
Harley-Davidson® accessory oil filter kits . . . . . . . . . . . . . . . . .$24.99 each
35316 With extra-long chrome RevTech® magnetic oil filters
(CC #35079) to fit Sportster® models from 1984 thru 2003,
all Dyna Glide models 1991 thru 2000 and all Big Twin
models from 1992 thru 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.99 each Intake
35317 With short chrome RevTech® magnetic oil filters (CC #35077)
to fit 1980-early 1984 Sportster® models, and 4-speed Big Twins
from 1982 thru 1986, except Softail® models. . . . . . . . . . . . .$22.99 each
With ‘Oil Change Helper’ for 1992-Up Softail® Models
35076 With long chrome RevTech® magnetic oil filters (CC #35078)
for Softail® models from 1992 to present . . . . . . . . . . . . . . . .$38.99 each
Engine
Gaskets
Developed exclusively for Custom
Chrome® by a major
U.S. oil company,
these RevTech®
lubricants bring you
the latest in oil
technology.
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
RevTech® Transmission Lube
GL5 multi-viscosity gear oil that was specially formulated to provide
improved fluid flow to bearings, easier cold weather shifting and reduced
drive-train friction. For use in all 4-speed, 5-speed and 6-speed Big Twin
transmissions.
35055 SAE 80W90 RevTech® Transmission Lube (case of 12) . . . . . . .$5.29 each
35066 SAE 85W140 RevTech® Transmission Lube for hot weather applications (case of 12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.79 each
RevTech® Primary Lube
RevTech® Primary Lube was specifically designed for use in the primary
chaincase of all Big Twin models equipped with a wet diaphragm spring
clutch from late 1984 to present.
35054
RevTech® Primary Lube (case of 12) . . . . . . . . . . . . . . . . . . . . .$4.29 each
635003 RevTech® Primary Lube (55 gallon drum) . . . . . . . . . . . . . .$599.00 each
RevTech® Semi-Synthetic Transmission Lube
RevTech Gear and Chaincase Lube
Specially designed for use in all XL and XR Sportster® motors from 1971
thru 2003 where the transmission and primary chaincase share a common
lubricant.
35056 RevTech® Gear/Chaincase Lube (case of 12) . . . . . . . . . . . . . . . .$4.39 each
Meets MIL Spec 2105-D and GL-5/GOH gear oils. For increased protection of
gears and bearings and resistance to lube degradation from shearing
forces, RevTech® Semi-Synthetic contains 10% synthetic lubricant. Rated for
use in all 4 and 5-speed Big Twin transmissions. . . . . . . . . . . . . . . . . . . .$6.29 each
35065 SAE 80W90 RevTech® Semi-Synthetic Lube (case of 12)
®
Frames
Forks
& Shocks
Sheetmetal
17.05
General
Cross
Reference
Motor Factory® Lubricants
• Designed to provide
maximum protection
• Blended in the USA
t Oil
Great Better!l
® Oi
Go
Just rFactory PI
ets A
Moto
me
now I-4/SL !
C rating
ice
r
se v
Motor Factory® Motorcycle Oil
Motor Factory® Motorcycle Oil is American made and meets or exceeds the API CI-4/SL rating, the highest in the industry. Motor Factory® motorcycle oil
features a formula which contains approximately 20% premium additives designed to provide maximum protection in air cooled four stroke engines like the
one in your Harley-Davidson® motorcycle. Sold in cases of 12 one quart bottles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.75 each
500370 SAE 50 (replaces regular heavy)
500371 SAE 60 (replaces extra heavy)
500372 Grade 70
500373 SAE 20W50 (replaces multi-grade)
Motor Factory®
Transmission Lubricant
General
Motor Factory® Transmission Lubricant is 100% American Made,
specially designed for use in all Harley-Davidson® Big Twin transmissions.
Sold in cases of 12 one quart bottles. . . . . . . . . . . . . . . . . . . . .$6.29 each
500382 80W90 Semi-Synthetic
500383 85W/140
Motor Factory® Gear and Chaincase Lube
Motor Factory® Sportster® Gear and Chaincase Lubricant is specially
designed for use in all Sportster® models thru 2003. It is blended
with unique anti-wear additives which prolong clutch life while
also assuring smooth shifting and reduced transmission gear and
bearing wear. Sold in cases of 12 one quart bottles. . . . . . .$4.39 each
500381 Motor Factory® Gear/Chaincase Lube
17
17.06
Motor Factory® One Gallon
20W50 Motorcycle Oil
Convenient 1 gallon container makes changing
oil easier with less waste. Same quality as our
quart size, Motor Factory® Motorcycle Oil is
American made and meets or exceeds the API
CI-4/SL rating, the highest in the industry.
Sold in a case of 4. . . . . . . . . . . . . . . . . . . . .$14.49 each
Motor Factory® Lubricants & Cleaners
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Motor Factory® Brake Fluid
Motor Factory Primary Case Lube
®
Motor Factory® Primary Case Lubricant, available
exclusively from Custom Chrome®, is designed to
lubricate the primary chain and clutch assembly
in most 1984-up Harley-Davidson® motorcycles.
It is blended to perform well at extreme temperatures to extend clutch life as well as protecting
the primary chain from premature wear and
failure. As with all Motor Factory® motor fluids
and parts, it is American made. *Not for use on
motorcycles with belt-driven primary drives.
Sold in one quart bottles. . . . . . . . . . . . .$4.29 each
500380 Primary chain lube (case of 12)
American made to exacting DOT-5 specifications,
Motor Factory® Motorcycle Brake Fluid is designed for use with all drum or disc brakes, stock
Harley-Davidson® and high performance aftermarket systems. It is a full synthetic blend which
is completely compatible with all types of brake
fluids, petroleum or synthetic. Motor Factory®
DOT-5 Brake Fluid will not damage painted or
powder coated surfaces, polished aluminum or
chrome-plating. . . . . . . . . . . . . . . . . . . . . . . .$8.33 each
500351 8 ounce bottles (case of 6)
Hand
Controls
Motor Factory Fork Oil
®
American-made Motor Factory® fork oil is
perfectly suited for aftermarket forks as
well as OEM fork assemblies. Motor Factory®
Fork Oil’s special high viscosity index formula
provides consistent, smooth damping action in
hot or cold climates without fading or surging.
Available in two weights: medium to replace
Type E, and medium light to replace Type B.
Sold in cases of 12 resealable 1 pint, no-drip
plastic bottles. . . . . . . . . . . . . . . . . . . . . . . . .$4.58 each
503100 Medium weight (replaces type “E”)
503110 Medium light (replaces type “B”)
Lighting
Electrical
Exhaust
Intake
Motorcycle Care Products by Motor Factory®
Motor Factory® — the name you trust to bring you the finest motor and transmission
oil, brake fluid, and fork oil, is proud to introduce a line of motorcycle care products!
As with all Motor Factory® products, they have been specially formulated for
motorcycle use and meet strict Motor Factory® quality guidelines. Motor Factory®.
The best care for your bike—inside and out!
Engine
Contact Brake Cleaner
This professional strength non-chlorinated brake cleaner cleans and degreases all
types of brake pads, rotors, and shoes. High pressure spray removes brake fluid,
grease, grime, and oil instantly without leaving residue. Designed to clean most
plastic, rubber vinyl, or painted surfaces cleanly and efficiently. Fastest drying brake
cleaner available.
500395 11 ounce aerosol can (case of 12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99 each
Gaskets
Tranny
& Clutch
Carburetor Spray
High pressure blast spray is formulated to remove dirt, gum, and varnish deposits.
Periodic use will keep engines clean, fuel efficient, and trouble free. Contains no lead
or silicone. Increases performance and reduces fuel consumption. Will not harm fuel
injectors.
Driveline
Wheels,
Tires
& Brakes
Spray Cleaner and Polish
The ultimate detailer in a can. Formulated to return showroom shine. Cleans chrome,
plastic and painted surfaces with minimum effort.
Chain Lube
This is the ultimate lubrication. It's dry, and nearly transparent. Chain Lube actually
seals the drive chain with a polymer rich in Teflon. Used regularly, Chain Lube will
increase performance, and extend the life of the chain.
Frames
Forks
& Shocks
White Lithium Grease
Formulated to protect most high friction areas, White Lithium Grease leaves a lasting
coat of moisture resistant protection. Designed to free stuck linkages, side stands,
and throttle controls.
Sheetmetal
Silicone Spray
Superior performance and protection. Specially formulated to protect plastic, rubber,
and vinyl. Silicone spray eliminates squeaking, and binding associated with heavy
wear areas.
General
17.07
Cross
Reference
Lubricants
Bel-Ray Gear Saver
Transmission Oil
Gear Saver Transmission Oil has
been developed specifically to
meet the needs of 2-stroke
motorcycle transmissions and
provides improved performance over ordinary motor oils.
Gear Saver Transmission Oil
features Extreme Pressure (EP)
additives which provide maximum gear protection and
clutch performance. Sold each.
Bel-Ray EXL
Petroleum Motor Oil
Bel-Ray EXP
Semi-Synthetic Motor Oil
Features the highest-quality base
oils and exclusive Bel-Ray additive chemistry to provide excellent wear protection for all
engines. Bel-Ray EXL reduces
engine deposits and improves
efficiency. EXL’s exceptional
shear resistance means it won’t
break down in high-revving
engines. Sold each.
Bel-Ray EXP’s formulation of special premium quality synthetic
and mineral base oils, combined with Bel-Ray’s exclusive
Anti-Wear chemistry results in
exceptional performance and
protection.
Bel-Ray EXP resists viscosity loss,
and improves performance.
Sold each.
3391655 SAE 20W50 (1 liter bottle) . . . . . .$4.95
3391663 SAE 20W50 (4 liter bottle) . . . . .$17.55
3391623 SAE 20W50 (55 gallon drum) . .$653.13
3391809
3391817
3391939
3391210
Bel-Ray Waterproof Grease
Big Twin Primary
3391837 1 liter bottle . . . . . . . . . . . . . . . . . . .$6.25
Provides maximum lubrication and corrosion resistance for wheel bearings,
bushing and chassis lubrication points. It is waterproof,
even in salt water. Sold each.
For Sportster® Models
3391841 1 liter bottle . . . . . . . . . . . . . . . . . . .$6.25
3391168 16 ounce tub . . . . . . . . . . . . . . . . . . .$4.21
3391980 14 ounce carton . . . . . . . . . . . . . . . .$4.21
3391973 35 lb. bucket . . . . . . . . . . . . . . . . .$121.15
Bel-Ray Gear Saver
Hypoid Gear Oil
Bel-Ray 6-in-1 Lubricant
Features special base oils and
Bel-Ray's exclusive Extreme
Pressure chemistry to give
unsurpassed protection for
all Big Twin transmissions.
Sold each. . . . . . . . . . . . . .$6.61
3391825 1 liter bottle
Contains the revolutionary additive
“Molbuamin” which provides high
film strength and cleans as it lubricates. It works as a penetrating and
lubricating fluid and aids in freeing
frozen nuts and bolts, protects against
corrosion and rust, displaces water,
reduces friction and will not harm
electrical contacts. Sold each. . .$7.12
3391282 16 ounce aerosol can
SAE 20W50 (1 liter bottle) . . . . . .$6.80
SAE 20W50 (4 liter bottle) . . . . .$24.95
Grade 50 (1 liter bottle) . . . . . . . . .$6.80
Grade 60 (1 liter bottle) . . . . . . . . .$6.80
Bel-Ray Brake Fluid
Silicone DOT 5 Brake Fluid meets the
D.O.T.’s highest brake fluid specifications. It does not absorb water
and has an extremely high boiling point to fight fade. It does
not affect painted or plastic
surfaces. Sold each. . . . . . . . .$9.50
3391152 12.5 ounce bottle
Bel-Ray
Brake & Contact Cleaner
Cleans and degreases brake components, electrical contacts, spark plugs,
electrical motors and all metal surfaces. Dries in seconds and leaves no
residue. Will not harm most plastics.
Sold each. . . . . . . . . . . . . . . . . .$6.56
Bel-Ray Assembly Lube
A stable, non-melting multi-purpose
lubricant having a phenomenal
capacity to prevent seizing
and galling at high pressures and
temperatures. Sold each. . .$9.50
3391397 10 ounce brush-top can
Castrol Act>Evo V-Twin
General
Synthetic based Act>Evo V-Twin
is a premium 4-stroke motorcycle
engine oil. Synthetic Active
Protection Molecules form a film
that clings to the engine, even
when the engine is turned off,
ensuring continuous protection
during the critical start and
warm-up phase. This formulation
exceeds API SG and JASO MA.
Sold each. . . . . . . . . . . . . . . . . .$5.09
3401077 SAE 20W50 (1 Liter)
17
17.08
Castrol V-Twin
Synthetic Based
An advanced, synthetic based
4-stroke motorcycle engine oil
that offers superior engine
lubrication and protection.
Reacts to changes in engine
temperature providing additional protection against thermal
and mechanical breakdown.
Exceeds API SG and JASO MA.
Sold each. . . . . . . . . . . . . . . . . .$8.58
3401078 SAE 20W50 (1 Liter)
Polishes & Hand Cleaners
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Permatex® Fast Orange
Pumice Bar Soap
Lighting
Permatex® Fast Orange bar soap is the quick and
easy way to those working hands clean. Contains pumice which is a deep cleansing ingredient found in volcano lava that leaves hands
feeling soft. Has a fresh citrus scent in a long
lasting 53/4 oz. bar. . . . . . . . . . . . . . . . . . . . .$2.08 each
30063 Sold in box of 24
Nevr-Dull® Wadding Polish
Simichrome Polish
Actually a fine cream paste of jeweler’s rouge,
used by metal craftsmen for years to polish
jewelry fittings and fine metals. Very low
abrasion, yet effective against oxidation, road
tar, and stubborn water stains on aluminum and
all other metals. . . . . . . . . . . . . . . . . . . . . . .$6.46 each
12416 Case of 24 tubes
Nevr-Dull® is chemically-impregnated cotton
wadding made by a special process. Cleans and
Electrical
polishes by the combination of special ingredi®
ents. Just tear off a wad of Nevr-Dull and rub
slowly over the surface to be cleaned, then take
a clean dry cloth and gently buff. Your metal
surfaces will shine like never before. Removes
Exhaust
rust and tar while leaving a high luster and protective film on chrome, aluminum, brass and
other surfaces. Sold each. . . . . . . . . . . . . . . . . . .$4.99
35130 5 ounce can
Intake
Engine
Gaskets
Tranny
& Clutch
Spoke Cleaning Brush
Hand Cleaners with Pumice
Fast Orange® is an Enviro-Safe™ product that
harnesses the cleaning power of natural citrus
extracts rather than petroleum solvents. Its formula tackles the toughest dirt and leaves your
hands clean and fresh smelling. Fortified with
lanolin, aloe and jojoba oils for skin care, and a
fine pumice powder to cut through the toughest grit. Sold each.
35024 15 oz. squeeze bottle . . . . . . . . . . . . .$6.49
35027 1 gallon with dispenser
and nail brush . . . . . . . . . . . . . . . . . . .$26.99
Autosol Metal Polish
This metal polish from Germany has won three
international gold medals and is recommended
by manufacturers, museums and restoration
experts around the world. Safely and easily
removes oxidation, corrosion, stains, rust and
blueing on pipes. Produces a brilliant reflective
luster. Special waxes endure a long-lasting shine
and protection against tarnish corrosion and
rust. Ideal for chrome, aluminum, stainless steel
alloys, brass, bronze and copper. Non-toxic formula has low ammonia content. . . . . . .$9.30 each
35035 3.5 ounce tube (case of 12)
Make those long afternoons of cleaning your
spoked wheels a thing of the past. A specially
designed Nylon brush makes child’s play of
Driveline
cleaning 40, 80, even 120 spoke wheels. . . .$16.49
400282 Sold each
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
17.09
Cross
Reference
Polishes & Cleaners
Luster Kit
Luster Pad
Luster Kit includes: 1 Jar of Luster Lace™
Polishing Strips Combo, 1 Jar of Luster Pad
and 1 Bottle of Revitalizer. . . . . . . . . . . .$22.49 each
60306 Luster Kit (case of 12)
The Polish is in the Cloth! Luster Pad is the perfect for flat or uneven surfaces. Just cut off a
piece and it’s ready to use. Measures 3/4" by
5 linear feet. . . . . . . . . . . . . . . . . . . . . . . . . .$9.59 each
60305 3/4" x 5' cloth pad (case of 12)
Luster Lace™ Polishing Strips
Luster Lace™ Polishing Strips is a polishing system like no other. Developed specifically for
round and tubular objects, Luster Lace™ polishes
all the way around in one motion.
Available in three convenient sizes:
Narrow: 1/2" x 16" (14 strips per jar)
Medium: 3/4" x 20" (9 strips per jar)
Wide: 11/4" x 28" (6 strips per jar)
Luster
60302
60303
60304
60301
Luster Care POP Display
General
Countertop display contains 6 jars of Luster
Lace, 6 jars of Luster Pad, 6 Revitalizers and
6 bottles of Luster Seal. . . . . . . . . . . . . . . . . .$209.99
60300 Counter display
17
Lace Polishing Strips
Narrow (case of 12 jars) . . . . . .$11.49 each
Medium (case of 12 jars) . . . . .$11.49 each
Wide (case of 12 jars) . . . . . . . .$11.49 each
Combo Lace – 4 Narrow, 3 Medium,
2 Wide (case of 12 jars) . . . . . .$11.49 each
17.10
Microfiber Cloth is a 16" x 16" extra plush
detailing cloth. It is lint free, safe for all surfaces
and is machine washable. It is unlike anything
you have used before. . . . . . . . . . . . . . . . .$5.95 each
60314 16" x 16" cloth (case of 12)
Bike Wash
Formulated to easily cut dirt and
grime with its rich lather, while
its gentle sheeting action reduces
$5.95 each
water spotting.
60316 8 ounce bottle (case of 12)
Super Pad
Luster Seal
An advanced non-abrasive
acrylic formula specially formulated to clean, preserve
and protect chrome, clear
coat, fiberglass, painted or
bare metal surfaces. . . .$9.99 each
60309 8 ounce bottle
(case of 12)
Microfiber Cloth
Revitalizer
Super Pad has the same high quality cleaner/polish as Luster Pad, but in a 51/4" pad to polish
larger areas. . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99 each
60307 51/4" round pad (case of 6)
Just a few drops of Luster Lace™
Revitalizer will extend the life and
polishing qualities of Luster Lace™
Polishing Strips. . . . . . . . . . .$3.99 each
60308 2 ounce bottle (case of 12)
Polishes & Cleaners
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Luster Detailer
Use between washing to keep that just polished
shine. Luster Detailer easily lifts bugs, tree sap,
light road film water spots and bird droppings
from painted surfaces, chrome, fiberglass, plastic
and glass. Luster Detailer is specially formulated
to clean without scratching and leaves a smooth
deep shine with a protective water repellent
coat.
60310 2 ounce bottle (case of 24) . . . .$2.95 each
60311 8 ounce bottle (case of 12) . . . .$6.95 each
60312 22 ounce bottle (case of 12) . .$11.95 each
Chrome Polish
Lighting
Electrical
Plexus Plastic Cleaner, Protectant
and Polish
The most effective protectant and polish for
motorcycles, watercraft, ATVs or snowmobiles.
Ideal for helmet shields, helmets, goggles,
motorcycle fairings, saddlebags, polished metals
and plated metals. To use, simply spray and wipe.
Leaves a lustrous, anti-fog, anti-static finish.
3431001 0.5 ounce spray (sold each) . . . . .$3.50
3431004 7 ounce aerosol can (sold each) .$5.95
3431008 13 ounce aerosol can (sold each) .$7.95
Plexus POP Display
Receive an air-up can for point of purchase display free with a three case order. . . . . . . . . .$5.76
3431010 Sold each
Exhaust
Intake
Specially designed for cleaning
and protecting fine surfaces
such as chrome, gold plating,
anodized metals, painted metals and clear coat. . . .$8.95 each
(case of 12)
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Polish, Wax and Treatment
Quick & Easy Wash
With Quick & Easy Wash you can wash any vehicle, anywhere, without rinsing. Quick & Easy Wash is a new concept designed to conserve water while
being quick and easy to use. You’ll love Quick & Easy Wash on all types of
glass and many other surfaces.
3966316 16 ounce bottle (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99
3966332 32 ounce bottle (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.25
3966310 1 gallon bottle (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.50
Clean, polish, wax, treat and protect all surfaces. Simply spray, wipe and
polish dry for a beautiful, durable lasting shine. You’ll clean less often with
Protect All. Bugs, streaks, dirt and dust are easily removed. Anti-static, nonabrasive and water repellent, Protect All replaces five or more different
products for all surfaces!
Protect All is the only product you’ll need to do it quickly and easily!
• Cleans: plastic, glass, mirrors
• Polishes: chrome, aluminum, stainless steel
• Waxes: clear-coat, paint, fiberglass (with Carnauba)
• Treats: vinyl, rubber, finished leather
• Protects: surfaces with UV Blocker
3966206 6 ounce aerosol can (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.98
3966215 13 ounce aerosol can (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99
3966216 16 ounce pump spray bottle (sold each) . . . . . . . . . . . . . . . . . . . .$13.00
3966264 64 ounce refill bottle (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . .$38.50
3966210 1 gallon refill bottle (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . .$50.50
17.11
Frames
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Polishes & Cleaners
RTU Bike Cleaner
Aluminum Polish
Excellent for all types of aluminum. Slightly abrasive to buff
the aluminum and give a shiny
finish. . . . . . . . . . . . . . . . . . . . .$12.95
(sold each)
A ready-to-use, all purpose
cleaner for street bikes. Safe
to use on aluminum, chrome,
paint, plastic and rubber. Cleans
dirt, grease, oil, brake dust and
road film easily without chemical
spotting. No mixing required.
Biodegradable and environmentally safe. . . . . . . . . . . . . . . . .$7.75
(sold each)
Showcase
V-Shine Chrome Polish
A non-abrasive product that will
shine chrome easily and effectively.
Because it is non-abrasive, it works
well on plastic chrome. . . . .$12.95
(sold each)
A non-abrasive wax that
blends together the most
technological silicones and
carnauba, producing a long
lasting protective wet-look
finish. Leaves no powder
residue. Wipes on and off
easily. Basecoat/clearcoat
safe. . . . . . . . . . . . . . . . .$15.50
(sold each)
Polishing
Cloth
These polishing cloths
will not scratch paint
or other delicate surfaces. Disposable
cloths are packaged
in a resealable bag.
15 cloths per pack.
Can be used on paint,
chrome, plastic and
aluminum. . . . . .$7.19
3601007 Pack of 15 cloths
Spraywax
Cleans and shines in one easy
step. Removes smudges, fingerprints and light dirt while leaving a slick shiny finish. Sprays
on easily and wipes off quickly
for less cleaning time. Basecoat
and clearcoat safe. . . . . . . .$8.97
(sold each)
Plastic Polish
A silicone product that brightens and
renews plastic. The special silicones
will not leave an oily finish, making
this a great product for all the plastic
surfaces on your bike. . . . . . . . . .$6.95
(sold each)
Gift Set
General
Starter Kit
17
Helmet Renew
A foaming product that cleans,
freshens and deodorizes helmet
liners and inner padding. Cleans
dirt from the liner or shell while
leaving a fresh and pleasant
fragrance. . . . . . . . . . . . . . . . . .$5.90
(sold each)
17.12
Starter Kit sample pack consists of a 4 oz. bottle
of RTU All Purpose Cleaner for street bikes, a
4 oz. bottle of Showcase, a non-abrasive liquid
wax, a 4 oz. bottle of Spraywax quick detailer
and three disposable Polishing Cloths. . . . .$9.53
3601010 Complete kit
The Gift Set includes the 16 oz. RTU, Spraywax,
Showcase and the 15 pack Polishing Cloths
attractively packaged with a gift tag and ribbon.
A great gift for any motorcyclist. . . . . . . . . .$30.50
3601008 Complete kit
Polishes & Cleaners
Leather Dressing
For drum dyed leather
jackets, boots, pants,
vests, saddlebags and
more. Excellent conditioner that will leave
the leather very soft and
pliable allowing the leather
to last much longer.
3601017 0.75 ounce jar (sold each) . . . . . . .$2.45
3601018 2.5 ounce jar (sold each) . . . . . . . .$6.95
3601019 6 ounce jar (sold each) . . . . . . . . .$10.95
Leather Cleaner
Absolutely the best leather cleaner available. Leaves NO residue,
and will leave the leather very
clean and ready to be conditioned. . . . . . . . . . . . . . . . . . .$5.95
(sold each)
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Bike Suds
A very foamy and high concentrate soap that cleans thoroughly without removing wax. The
synthetic soap is a neutral PH
that will not streak and eliminates water spotting. . . . . . .$7.96
(sold each)
Hand
Controls
Speed Clean
Lighting
Maximum strength cleaner
for off-road bikes and ATVs. Cleans
dirt, grease and oil easily and will
not leave a residue. It especially
cleans the stains dirt leaves behind
without scrubbing and rubbing.
Safe to use on dirt bikes, ATVs,
snowmobiles and watercraft.
Ready to use, requires no mixing. Biodegradable and environmentally safe. . . . . . . .$9.80
(sold each)
Leather Lotion
Use Pro Clean’s Leather Lotion
on any leather that is not drum
dyed. Softens leather and leaves
a semi-glossy finish. . . . . . .$7.95
(sold each)
Apparel
Electrical
Exhaust
Intake
Bike Cleaner
Concentrate
The “Concentrate”
cleaner that can be
mixed with water.
A concentrated
formula of the premixed Speed
Clean. Great for
refills…
1 quart of concentrate will make
1 gallon of Speed
Clean. Three parts
water to one part
concentrate.
Recommended for off-road
bikes and ATVs.
3601001 32 ounce bottle (sold each) . . . .$10.50
3601002 1 Gallon bottle (sold each) . . . . .$19.95
3601003 5 Gallon drum (sold each) . . . . . .$94.50
Lexol® Leather Care
Balanced Leather Cleaner
A high-foaming, concentrated, deep-cleaning
formula that loosens and breaks-up embedded
dirt in hard-to-get-at places; lifts out grime and
foams it away. Non-alkaline Lexol-pH® is safer
for leather because its pH is virtually the same
as the leather itself. Follow up the cleaning
with Lexol® conditioner. . . . . . . . . . . . .$6.29
35047 Sold in a 200ml bottle (6.76 fl. oz.)
Conditioner and Preservative
Microscopic oil droplets in the Lexol® formula
are readily absorbed, actually bonding themselves to the fibers to nourish and revitalize the
leather. Lexol® Conditioner produces a rich luster and satin finish. Equally effective on wet or
dry leather.
35046 Sold in a 200ml bottle (6.76 fl. oz.)
ProClean 1000
Chemical
Display
Engine
Receive a free floor display with a qualifying
order. Contact your
Sales Rep for details.
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Leather Lotion and Leather Dressing
Forks
& Shocks
You’ve bought the best leather…Now give it the
best care!
• Dressing cleans and treats leather to repel
water, snow and dew
• Lotion leaves a protective, water-resistant
finish, adding years of life to the leather
• Regular application helps to maintain
the suppleness and beauty of leather
8200998 Leather Lotion (sold each) . . . . . .$6.98
8200999 Leather Dressing (sold each)
$6.98
Sheetmetal
General
17.13
Cross
Reference
Polishes & Cleaners
DYNO-KOTE™ Pipe Blueing Preventative
At last there’s an answer to one of the oldest questions in the motorcycle industry “how
do I keep my exhaust pipes from blueing?” The answer is DYNO-KOTE™, available
exclusively from Custom Chrome®. DYNO-KOTE™ is a specially-formulated internal
exhaust pipe sealer which forms a protective heat barrier that minimizes blueing in most
exhaust systems. As part of the installation process, DYNO-KOTE™ actually bonds itself to
the walls of the exhaust when exposed to high exhaust temperatures. DYNO-KOTE™ may
only be used in new exhaust systems which have not been previously run, and installation is as easy as pouring it into the headpipes and rotating them until they’re evenly
coated. When properly installed, your exhaust pipes can retain that ‘new’ look for thousands of miles and not just a few hours like unprotected pipes. . . . . . . . . . . . . . . . . . . .$39.99
11499 Complete kit (includes two 8 oz.bottles and brush)
Note: This product should not be used in any exhaust system which has built-in anti-reversion cones (i.e.,
‘Python’ or Custom Chrome ‘AR’ pipes), nor should it be used in SuperTrapp or Rich Products ‘Thunderheader’
exhaust systems. There is no practical way to drain the product back out of the headpipes past the anti-reversion
cone without plugging it up and rendering it useless. Pipes may still blue slightly if installed on a motor that is
improperly jetted or timed, or the choke is left on for extended periods of time. Exhaust systems with extremely
sharp bends coming out of the heads may also discolor or blue slightly.
Blue Job Chrome Polish
General
Removes the oxidation-caused, discoloration or “bluing” that
plagues most chrome-plated exhaust systems. It’s a fine, highly concentrated powder that mixes with water, forming a thick, nonscratching paste. Can be rubbed on using a supplied 11/2" x 10" silk
applicator cloth. Has no perfumes or waxy residue. Also performs
well on brass, copper, stainless steel as well as engine cases, footpeg brackets and wheels (not made for use on billet aluminum).
The non-toxic formula even works on road grime and burned-on
boot marks.
31702 Case of 12 with point of purchase display . . . . . . . .$8.99 each
Kreem Combo Pack
The Kreem tank prep products and sealer kit combine to create an excellent ‘tank within a tank.’ Tank degreaser removes
oil film from inside new tanks. The advanced sealer formula
cures to a tough white skin which protects the inside of the
tank from rust and corrosion. Resists leaded and unleaded
gasoline, gasohol and octane boosters or fuel additives when
used in recommended concentrations. Available in a complete
kit which includes the sealer and the tank prep, or separately.
Kreem tank mask protects paint finish on the exterior when
treating the inside of the tank.
3991004 Combo Pack (prep and tank sealer) . . . . . . . . . .$31.50
3991012 Tank Prep only (two part mixture) . . . . . . . . . . . .$15.25
3991008 Tank Sealer only (one pint bottle) . . . . . . . . . . . .$16.95
3991005 Tank Degreaser (one pint bottle) . . . . . . . . . . . . . .$7.42
3991010 Tank Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.24
Note: Due to DOT regulations, these products cannot be shipped by air
freight.
Mothers® Billet Metal Polish
Takes metal polish technology to a whole new level! State-ofthe-art cleaners and cutting edge formulation give your billet,
forged and finely cast aluminum, brass and other metals in
need of some polishing the absolute finest finish available,
guaranteed! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.99 each
601000 Case of 6
17
Note: Not recommended for gold plating, chrome, anodized, painted or coated metals.
17.14
Mothers® Polishes & Cleaners
Mag and Aluminum Polish
Perfect on magnesium, aluminum, brass, silver, copper, stainless steel or
neglected chrome. Produces a brilliant luster and provides a long lasting
protective barrier to corrosion.
26022 5 oz. jar (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.24
26023 5 oz. jar (case of 12) repl. OEM 99730-86T . . . . . . . . . . . . . . . . . . .$76.80
500291 10 oz. jar (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.99
Chrome Polish
Non-abrasive cleaner for chrome, glass, and polished stainless steel.
Removes grease, water spots, light rust, road film and fingerprints.
Leaves protective coating that resists spotting.
26018 8 oz. bottle (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.49
26034 8 oz. bottle (case of 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.84
California Gold® Showtime® Instant Detailer
The ‘ultimate’ show shine in just seconds. Removes surface dirt and brings
out the natural beauty. Great for upkeep between washing and waxing.
26047 16 oz. bottle (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
25990 16 oz. bottle (case of 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.94
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
California Gold® Car Wash
Lighting
This ultra-sudsy carwash contains detergent strong enough to wash away
any dirt, road film, bugs, bird droppings and other contaminants, yet its exclusive pH balanced formula will not remove wax and resists water spotting.
3901008 16 oz. bottle (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.32
3901009 32 oz. bottle (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.87 Electrical
Pre-Wax Cleaner
Incredible results on clear coat paints, lacquers, enamels, pearls, candies,
urethanes and all other paint types. Prepares paint for waxing or glazing
by removing oxidation, dirt, stains and old wax. Restores color and luster
to your paint.
06610 16 oz. bottle (case of 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99 each
Natural Formula Pure Carnauba Wax
Carnauba wax and just enough modern chemistry to let you easily apply it,
remove the light haze and enjoy the most spectacular shine you will ever
experience – no muss, no fuss. For a truly brilliant shine it’s the best!
06613 12 oz. paste cans (case of 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$20.99 each
06614 16 oz. bottle (case of 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.40 each
Mothers® Polishes
and Cleaners
Famous for one of the finest metal
polishes ever to shine up a primary
cover or mag wheel, Mothers also
makes some of the best cleaners and
waxes ever rubbed on a motorcycle.
From paint to plastic windshields to
leather jackets, Mothers takes care
of you and your bike.
Leather Care Products
Keeps jackets, seats, boots and all smooth leather products clean and protected. The cleaner removes most stains and is deep-cleaning preparation
for the conditioner which beautifies, moisturizes and protects.
Leather Conditioner
25935 8 oz. bottle (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99
25934 8 oz. bottle (case of 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.94
Leather Cleaner
500300 8 oz. spray bottle (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99
25936 8 oz. spray bottle (case of 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.94
Polishin‘ Pad
They put the polish in the pad! Mothers legendary metal polish in a convenient applicator pad. Simply tear off a small piece and proceed to bring
a shine and sparkle to all metals. Wheels, valve covers, cases, just about
any metal can be polished to a brilliant shine.
25938 3 oz. jar (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99
25939 3 oz. jar (case of 12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$143.88
California Gold® Original Formula Carnauba Cleaner Wax
Genuine Brazilian carnauba wax combined with state-of-the-art cleaners
and finish-restorers provide a long lasting beautiful shine.
500292 12 oz. paste jar (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.74
06621 12 oz. paste jar (case of 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$77.94
26028 15 oz. liquid bottle (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99
26032 15 oz. liquid bottle (case of 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.94
Exhaust
Intake
Engine
Clay Bar Paint Saving System
Safely and easily removes paint damaging contaminants such as embedded
metal particles, tree sap, paint overspray, dulling haze and more. Clear coat
safe and produces a glossy, smooth, ready-to-wax surface. System Includes:
80 gram Clay Bar, 16 oz. Showtime® Instant Detailer, 4 oz. Original Formula Gaskets
Carnauba Cleaner Wax.
06616 Case of 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$126.54
Wheel Mist® Wheel Cleaner
The original one-step wire and mag wheel cleaner, formulated for chrome
and rough cast aluminum. No scrubbing or elbow grease needed. Simply
spray on then hose off dirt, oxidation, rust and brake dust for the best
shine and the ultimate sparkle! Works great on chrome bumpers, exhaust
pipes and any hard to clean bright metal surface.
06617 22 oz. bottle (case of 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.99 each
Preserves Protectant
This unique formula penetrates and bonds to block out the harmful effects
of UV rays, ozone, smog and contaminants. It preserves and protects rubber, vinyl, plastic and fiberglass for 30 days!
3901005 16 oz. bottle (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.07
06618
16 oz. bottle (case of 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.94
Back-To-Black
Works incredibly well on both smooth and textured surfaces. Renews and
protects all exterior trim. Perfect for use on vinyl, rubber, plastic, and even
flat finishes, whether they are black or not! Treated surfaces will look new
again and be protected against further oxidation of deterioration caused
by harsh elements.
3901010 8 oz. bottle (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.36
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
17.15
Cross
Reference
Polishes & Cleaners
Pig Snot™ Biker Wax
Pig Snot is formulated with the finest
non-silicone waxes and scientific hand
glaze materials. It is recommended for
all painted and chrome surfaces and
doesn't contain any cleaners.
(sold each) . . . . . . . . . . . . . . .$12.99
(case of 12) . . . . . . . . . . . . .$144.99
645130 24 ounce squeeze bottle
(sold each) . . . . . . . . . . . . . . .$19.95
Pig Snot™
Super Cleaner
Formulated as an
effective all purpose
cleaner that safely
cleans all painted surfaces, tires and
wheels, engines and
all metal surfaces.
Simply spray and
rinse your entire
bike, it's that simple!
Sold each.
645132 Super cleaner . . . . . . . . . . . . . . . . . . . .$13.95
Blueaway
Helps remove blueing and yellowing from exhaust pipes. Use regularly to maintain that ‘new pipe’
look. Sold each. . . . . . . . . . . . . .$13.99
12415 21/2 ounce bottle
Pig Snot™ Spray Detailer
After extensive effort and research
involving motorcycle dealers, professional car dealers and wholesale wax
distributors, the final result is a safe and
fast way to maintain your ride’s appearance. Pig Snot™ Spray Detailer removes
fingerprints, light dirt, water-spots and
bird droppings without rewaxing. It is
safe for all types of paint, clearcoats,
metal and plastic. . . . . . . . . . . . . . . .$9.99
500317 10 ounce spray bottle
(sold each)
Super Cloths
by Pig Snot
Non-abrasive lint free disposable cloths for
polishing, waxing, and buffing. Each cloth
measures 12" x 26". Packaged in resealable
plastic bags. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99
500329 Pack of 12
Pig Snot™ Metal Polish
Specially formulated to bring
chrome and polish billet aluminum to a high luster.
Available in a 5 oz. container.
Sold each.
645131 Metal polish . . . . . . .$6.99
699003
699002
699001
699000
Bike Brite™
General
Pig Spit Detailing Spray
Improves the appearance of the
motorcycle motors, transmissions,
trim and components. Restores
dull or faded rubber, tires, trim,
vinyl, paint, chrome, and other surfaces. Brightens color and gives a
clean finish. Won’t burn off hot
motors or attract dust. .$11.83 each
(case of 12)
Note: Due to DOT regulations, this product
cannot be shipped by air freight.
17
17.16
A triple-action formula designed especially for
cleaning motorcycles. It washes, cleans and
degreases, and is safe for the engine, paint,
chrome, and wheels. Just spray on and hose off.
The sprayer has an adjustable nozzle and the formula helps prevent water spots while inhibiting
the formation of rust. It’s biodegradable, non-acid
and pH controlled. Also available in 5, 30 and 55
gallon drums for those with heavy-duty cleaning to
do. Each is equipped with a Bike Brite™ drum pump.
35126 32 ounce bottle (case of 6) . . . . . .$9.99 each
33971 64 ounce refill bottle
(case of 6) . . . . . . . . . . . . . . . . . . . . .$15.99 each
699000 5 gallon drum . . . . . . . . . . . . . . . . . . . . .$115.00
699001 30 gallon drum . . . . . . . . . . . . . . . . . . . .$650.00
699002 55 gallon drum . . . . . . . . . . . . . . . . . . . .$899.00
699003 Bike Brite™ Hydrofoamer . . . . . . . . . .$114.00
Polishes & Cleaners
S100 Leather Care
and Protector
Apparel
Bike Kits
& Trailers
The best available quality
leather care & protector
on the market. Developed
Seats
to use on all jackets,
& Bags
motorcycle seats, pants
and other leather apparel.
84167 250 ml aerosol can
Foot
Controls
Hand
Controls
S100 Motorcycle Total Cleaner
The real fun in motorcycle riding starts with a
clean, shiny, impressive bike. Just spray onto
your bike, wash it off, and ride away.
84158 1000 ml spray bottle
84159 1000 ml refill bottle ONLY
84163 5 liter refill canister
Lighting
Electrical
Exhaust
Intake
Engine
S100 Chrome & Aluminum Polish
S100 Motorcycle Care Products
Custom Chrome Europe offers the complete line
of S100 Motorcycle care products made in
Germany with the latest technology.
S100 Shop in Shop Display Rack
This sales support rack comes completely filled
with the most popular S100 products.
S100 Motorcycle Cleaner
The perfect polish to bring your old chrome
parts to a new shine. Can be used for aluminum
and chrome parts, windshields and paint.
84171 75 ml tube (sold each)
The convenient cheaper alternative to the S100
Total cleaner. Will clean your bike perfectly and
protect rubber, plastic and enamel. Comes free
from all acid.
84160 1000 ml spray bottle
Gaskets
Tranny
& Clutch
Each rack includes the following:
Driveline
84158 S100 Motorcycle Total Cleaner spray
bottles, (12 one-liter bottles)
84159 S100 Motorcycle Total Cleaner refill
bottles (12 one-liter bottles)
84171 S100 Motorcycle Polish (18 tubes)
Wheels,
Tires
& Brakes
Note: Dealers contact your Sales Rep for details.
Frames
Forks
& Shocks
S100 Chain Cleaner
and White Chain Lube
Developed to clean and quickly degrease all primary and secondary chains. To lube them, use
the Teflon chain spray. Specially formulated for
conditions from -30° to 110° Celsius. This spray
won’t fly off, and protects all kinds of secondary
chains against water and dirt. Sold each.
84169 S100 White chain lube
(400ml aerosol can)
Sheetmetal
Polishing Cloths
Super-soft 100% cotton cloths to polish all
chrome and aluminum parts to a very high finish.
84153 100-piece box
17.17
General
Cross
Reference
Service Products
J-B WELD Original
Cold Weld Compound
by J-B Weld
Easy, convenient, and inexpensive
alternative to welding, soldering,
and brazing. J-B WELD can be
formed, drilled, ground, tapped,
machined, filed, sanded, and
painted. . . . . . . . . . . . . . . . . . . . . .$8.29
500167 1 oz. tube hardener/1 oz.
steel epoxy
RevTech® Oil Change Helper
Permatex® Ultra Slick™ Engine
Assembly Lube
A molybendium disulfide lube that allows proper lubrication of metal mating surfaces prior to
starting a new or rebuilt engine. Use on bearings, rockershafts, cams, lifters and all metal-tometal contact points.
35124 4 oz. bottle (sold each) . . . . . . . .$6.49
58589 1/4 oz. tube (card of 12) . . . . . . .$1.28 each
Take the mess out of the oil change process. Forget the cleanup of oil drippings on the engine case and frame tubes. Snaps
behind the oil filter mount to funnel oil away from the bike
into the drain pan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.99
20989 Fits Evolution® models from 1992 thru 1999 and Twin
Cam 88® models from 1999 thru 2002 (sold each)
Note: Must remove fuel injection sensor when using on Twin Cam 88® models
030667
RevTech® Chain Lube
J-B KWIK Cold Weld
Compound by J-B Weld
JB KWIK cures in just 4 minutes!
It's the easiest all-purpose coldweld you can use for most maintenance and repairs. Not as strong or
as heat-resistant as industrial
grade. . . . . . . . . . . . . . . . . . . . . . . .$8.29
500168 1 oz. tube hardener/1 oz.
steel epoxy
Blended especially for Custom
Chrome® by PJ1®, using their
world-famous Blue Label® formula which is endorsed by
leading chain manufacturers
and racing teams. RevTech®
Chain Lube may be used on
any type of rear drive chain,
including O-ring chains. It is a
thin fluid that quickly penetrates the chain links, converting to a tough film which
completely lubricates and
protects all critical points of
the chain. Most importantly,
RevTech® Chain Lube keeps Orings pliant and flexible, preventing drying out and
cracking. With its eye-catching packaging and
low case-cost, this chain lube is a natural for
even the smallest of shops. . . . . . . . . . . . .$4.83 each
35097 8 ounce can (case of 6)
Note: Due to DOT regulations, RevTech® Chain Lube cannot
be shipped by air freight.
030677
030676
General
030674
030675
Premium quality butt and ring
connectors for high moisture
environment. After crimping,
heat the connection to shrink
tubing and activate sealing
adhesive. Sold in packs of 25.
Shrink Tube Butt Connectors
030665 Fits 22-18 gauge wire (red) . . . . . . . . . . . . . . .$12.99
030666 Fits 16-14 gauge wire (blue) . . . . . . . . . . . . . .$12.99
030667 Fits 12-10 gauge wire (yellow) . . . . . . . . . . . .$16.99
Shrink Tube Ring Terminals
030674 Fits 22-18 gauge wire, #10 stud (red) . . . . . .$16.99
030675 Fits 22-18 gauge wire, 1/4" stud (red) . . . . .$17.99
030676 Fits 16-14 gauge wire, #10 stud (blue) . . . . .$16.99
030677 Fits 16-14 gauge wire, 1/4" stud (blue) . . . .$17.99
030666
17
17.18
030665
Shrink Tubing
Connectors
J-B STICK WELD by
J-B Weld
Use it to
plug holes
and make permanent repairs
under water and in gas tanks –
while they’re still
leaking! . . . . . . . . . . . . . . . . .$8.29
500169 2 oz. stick
030666
Paints & Paint Removers
Apparel
Bike Kits
& Trailers
Seats
& Bags
VHT Gloss Black
Barrel Paint
Specially-formulated for engine
overhaul specialists and restorers.
This paint will make your engine
look like new again, and is resistant to oil, gasoline and high temperatures. . . . . . . . . . . . .$7.26 each
(case of 6)
Foot
Controls
Hand
Controls
Note: Due to DOT regulations, this product cannot be shipped by air freight.
Lighting
35088
35087
Electrical
VHT Paint
Flat Black Flameproof Coating
Exhaust
VHT (Very High Temperature) Flameproof Coatings have been used on
lunar landing modules, atomic power plants and countless other applications. The same coating will serve the most demanding requirements, such
as engine parts, exhaust pipes, etc. Flameproof Coating withstands temperatures up to 1350°F.
Intake
35087 13 ounce aerosol can (case of 6) repl. OEM 98616-87T . . . .$8.33 each
Black Wrinkle Finish Paint
Adds rich texture to engine parts and other accessories. VHT Wrinkle Finish
will withstand fading, grease, engine cleaners and weather. The wrinkle
texture will appear within one hour after application.
35088 13 ounce aerosol can (case of 6) . . . . . . . . . . . . . . . . . . . . . . . . .$8.39 each
Engine
Note: Due to DOT regulations, these products cannot be shipped by air freight.
Gaskets
VHT ‘Strip Fast’
Paint Remover
Simplifies the removal of most
stickers or gaskets from metal,
glass or wooden surfaces. The
color peels off after 15 minutes
and you can scrape it off with a
scraper or steel brush.
84157 13 ounce
aerosol can . . . . . . . . .$14.39
Tranny
& Clutch
Bike Brite® Moto Black
Driveline
The perfect way to add a bright like new
look to black wrinkle and powder coated
parts. Make that dull engine shine like new
again. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99 each
35128 4 ounce aerosol can (case of 12)
Wheels,
Tires
& Brakes
Note: Due to DOT regulations, this product cannot be
shipped by air freight.
Frames
Forks
& Shocks
Sheetmetal
General
17.19
Cross
Reference
PJ1 Products
PJ1 Cable Lube
PJ1 Re-New & Protect
Cleans and lubricates in one
easy step, extends cable life,
and provides smooth, easy, likenew operation. Sold each. .$6.39
Super silicone moisturizing formula Renews & Protects all plastic, vinyl
and fine leather. Sold each.
3811381 8 ounce spray
bottle . . . . . . . . . .$3.38
3811385 16 ounce spray
bottle . . . . . . . . . .$5.29
3811377 1 gallon
refill . . . . . . . . . . .$27.07
PJ1 Gloss Black 500ºF
Engine and Case Paint
PJ1 Satin Black 500°F
Engine and Case Paint
PJ1 Flat Black 1500°F
Exhaust Paint
High gloss finish prevents rust
and corrosion. Sold each. . .$6.98
Semi-gloss finish prevents rust
and corrosion. 16 ounce aerosol
can.
3811353 Sold each . . . . . . . . .$6.98
35892
Case of 6 . . . . . . . .$43.99
For all 2 and 4-stroke exhaust systems, produces factory-like
smooth finish. Sold each. . .$8.15
PJ1 Gloss Black Epoxy
Frame Paint
High gloss finish, prevents rust
and corrosion. 16 ounce aerosol
can.
3811357 Sold each . . . . . . .$7.13
35891
Case of 6 . . . . . .$43.99
PJ1 Satin Black Vinyl
Penetrating Dye
Renews and restores old seats.
Won't rub off, crack or peel.
Sold each. . . . . . . . . . . . . . . . . .$7.13
PJ1 Wrinkle Black
500°F
Texture Paint
Provides durable textured finish,
dissipates heat quicker.
Sold each. . . . . . . . . . . . . . . . . .$7.13
Flat Shield
General
PJ1 Products
Balance
Plus
Stops wheel
hop, provides
puncture and
leak protection, won't rust rims or clog valve
stems.
3811537 8 oz. bottle . . . . . . . . . . . . . . . . . . . . .$5.46
3811720 6-gallon Drum . . . . . . . . . . . . . . .$230.48
3811243 Pump for 6-gallon drum . . . . . . .$71.50
17
Fork Oil
PJ1 Fork Oil maintains the same viscosity at a
wide range of outside temperatures.
35883 15 weight (1/2 liter) case of 6 .$4.97 each
Contact Cleaner
Aerosol super cleaner. An ideal spray to quickly
clean and degrease all metal surfaces,leaving
no residue.
35888 20 ounce can (case of 6)
replaces OEM 99878-87T . . . . . .$5.97 each
Seals punctures up to 1⁄4" in
diameter with its exclusive
Kevlar® Fibers/Glycol formula,
won't rust rims or clog valve
stems, approved for tube and
tubeless tires. Sold each.
3811216 8 oz. bottle . . . .$5.62
3811244 16 oz. bottle . .$8.67
3811227 32 oz. bottle .$12.82
3811228 Gallon . . . . . . .$44.99
3811235 6-gallon drum . . . . . . . . . . . . . . . .$237.35
3811529 Pump for gallon container . . . . . .$5.96
3811243 Pump for 6-gallon drum . . . . . . .$71.50
Note: Due to DOT regulations, none of these products can be
17.20
Chemicals & Cleaners
Bike Kits
& Trailers
Contact Brake Cleaner
Spray Cleaner
and Polish
Quick drying and non-flammable.
Designed to clean brake pads,
rotors and shoes without residue.
Easily removes grease, oil, brake
fluid and dirt from brakes for better performance and safety. . .$4.99
(sold each)
The quick and easy detailer. Floats
dirt and dust off paint, chrome,
plastic and vinyl surfaces. Reduces
static attraction to dust and leaves
a great shine with UV protection in
just seconds. The ultimate detailer
in a can. . . . . . . . . . . . . . . . . . . . . . .$5.99
(sold each)
Apparel
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
Chain Lube
The ultimate in lubrication. This
fast drying formula leaves a protective film that repels dirt and
water. Regular use of this
Polymer rich lube extends the
life of chains. . . . . . . . . . . . . .$5.99
(sold each)
Engine Degreaser
Carb Spray
Pro strength formula removes
oil, grease and dirt without
using harsh chlorinated solvents
or ozone depleting chemicals.
Fast action
and easy rinse-off make for a
quick cleanup. . . . . . . . . . . . . .$4.99
(sold each)
Professional strength high pressure blast removes carbon, gum
and varnish deposits. Cleans all
exterior and interior carburetor
and choke parts to improve performance. Eliminates rough
idling and stalling. . . . . . . . . .$3.99
(sold each)
Exhaust
Intake
Engine
Gaskets
Motorcycle Stuff Chemical
Display Rack
Ask your Sales Rep for details on how to receive
your free display.
3659000 Display
Tranny
& Clutch
Purple Cleaner
Silicone Spray
Superior performance and
long-lasting protection.
Specially-formulated to protect
all plastic, rubber and vinyl surfaces. Eliminates squeaking and
binding associated with heavy
wear areas. . . . . . . . . . . . . . . .$4.49
(sold each)
Concentrated, industrial strength
cleaner and degreaser. Super concentrated, dilute up to 1:20 ratio.
Use full strength for engines, shop
equipment, concrete floors and
tools. Dilute for medium and
light cleaning of vinyl, plastics
and fiberglass surfaces. . . .$6.75
3651007 32 ounce spray bottle
(sold each)
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
The Motorcycle Stuff® chemical line represents
premium quality chemicals in a concise high-use
offering with great pricing.
General
17.21
Cross
Reference
Motorex Chemicals
Chain Clean 611
ChainLube 622
Fully synthetic, wear reducing
lubricant for motorcycle chains.
Also available in a refillable
baby can (0.056 liter). Sold each.
3750071 0.5 liter
aerosol can . . . .$7.50
3750072 0.056 liter
Highly effective cleaner for all drive
chains. Removes caked-on residue.
Excellent chain maintenance. Tested
with X-rings and O-rings. After
cleaning the chain, spray it with
one of the Motorex ChainLube
Products. Regular use of chain care
products lengthens the life of the
chain. Sold each. . . . . . . . . . . . . .$6.95
3750073 0.5 liter aerosol can
Legend 4T
4-stroke engine oil for motorcycles with separate transmission and engine lubrication.
The Legend series is available
in monograde and multigrade. It is best known for its
high temperature and oxidation stability. Perfect for the
classic bike. Sold each.
3750021 20W50, 1 liter bottle . . . . . . . . . . .$6.95
3750022 SAE 40, 1 liter bottle . . . . . . . . . . . .$7.50
3750023 SAE 50, 1 liter bottle . . . . . . . . . . . .$7.50
Prisma ZX
Synthetic blend hypoid transmission oil. Top transmission
comfort, noise-reducing.
Not for use with wet clutch!
Sold each. . . . . . . . . . . . . .$12.95
Universal 2000
Spray Grease
ChainLube 622 Strong
Clear, extremely resistant, wearhindering lubricant for all X-ring
and O-ring motorcycle chains.
Also available in a refillable baby
can (.056 liter). Sold each.
3750069 0.5 liter
aerosol can . . . . .$7.95
3750070 0.056 liter
aerosol can . . . . .$4.75
Silicon Spray
Chainlube Racing
Motorex DOT 5.1
Brake Fluid
High performance brake fluid
for all hydraulic brakes.
Extremely high boiling point
of not less than 265ºC/509ºF.
Specially suited for the toughest racing. Sold each. . . . . .$5.95
3750063 0.25 Liter can
Fully synthetic, versatile colorless
spray grease lubricant. Resists spray
and rain. Temperature stable from
-22ºF to 392ºF. Gives a durable
lubrication film after a short drying period. Specially suited for the
protection of wheel and swingarm
axles. Sold each. . . . . . . . . . . .$6.95
3750080 0.5 Liter aerosol can
White, Teflon®-reinforced chain
lubricant with an outstanding
adhesion to all motorcycle
chains, especially X- and O-ring
types. Resistant to spin, waterproof and stable to temperature.
Also available in a refillable baby
can (.056 liter). Sold each.
3750067 0.5 liter
3750068 0.056 liter
Lubricant, maintenance and protection spray for all plastic, rubber and
metal surfaces. Gives dull, worn
plastic motorcycle parts a high-gloss
finish and will protect rubber from
freezing. A great bike detailer.
Sold each. . . . . . . . . . . . . . . . . . . . . .$6.95
Fuel Stabilizer
General
Fuel additive for winter and other
long periods of storage. Prevents
oxidation and gummy build-up and
ensures a smooth start after extended storage. Sold each. . . . . .$4.95
3750066 0.125 Liter bottle
17
Power Plus
Water condensation occurs in fuel
tanks during temperature changes
which can lead to malfunctions.
Power Plus binds condensed water,
protects and maintains the entire
fuel system, and keeps fuel burning
clean. Sold each . . . . . . . . . . . . . .$3.95
3750065 0.125 liter bottle
17.22
Long Last Grease
Long Last Grease is a fully
synthetic, multi-purpose, colorless lubricant. Extremely
resistant to pressure and shock
and is extremely adhesive.
Reliable against spray and rain.
Stable for temperatures from -30C
degrees up to +200C degrees.
Exceptional protection against corrosion. Does not gum up. Contains no
silicone. Dries quickly to provide a reliable film of protection. Specially well
suited for lubrication and corrosion protection
of wheel and swingarm axles. Sold each.
3750109 400 gram cartridge . . . . . . . . . . . . .$9.95
3750110 475 gram tube . . . . . . . . . . . . . . . .$10.95
3750111 850 gram jar . . . . . . . . . . . . . . . . . .$17.95
Motorex Floor &
Counter Displays
Ask your sales rep.
for details.
3759997 Counter
Display
3759999 Floor Display
Motorex Chemicals & Cleaners
Air Filter Oil 206
Air Filter Cleaner
Specially developed, long
lasting air filter oil, enriched with a quick evaporating solvent, distributes
instantly over the entire
filter element. Excellent
against the penetration
of sand, dust and water.
Easily removed with oil
separating cleaners.
Sold each. . . . . . . . . . . .$7.95
3750053 1 liter can
With Motorex Air Filter
Cleaner, even extremely
dirty filter elements are
clean in an amazingly
short time. Sand, dust,
water and all other substances are separated
immediately and effortlessly. Free of solvents,
biodegradable and noncombustible.
Sold each. . . . . . . . . . .$7.95
Air Filter Oil Spray 655
Specially developed spray air filter oil.
Keeps out sand, dust and water.
Advantages of the spray include an
end to oily hands, filter impregnation
and economy in use. Sold each. . .$9.95
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Joker 440
Anti-Freeze
Fully synthetic spray for the care
and protection of cables. Migrates
beneath and displaces water, dissolves stubborn dirt and rust
and provides dielectric protection.
Good for all slow moving parts.
Sold each. . . . . . . . . . . . . . . . . .$7.95
Ready to use cooling fluid for
water-cooled motorcycles.
Specially suited for aluminum
and magnesium motors.
Gives protection down to 22ºF. Sold each. . . . . . . . .$5.95
Lighting
Protect & Shine 645
Makes your bike shine like new and
protects metal and chrome parts
from corrosion. Cleans and protects
rubber, plastic and leather. Great
for long-term winter protection.
Sold each. . . . . . . . . . . . . . . . . . . . .$7.95
Electrical
Exhaust
Intake
Power Brake Clean
Powerful acting cleaning spray. Loosens
even the toughest dirt build-up with
convincing cleaning power. Easily removes oil, grease, tar, brake fluid and
dirt from discs, pads and other metal
components. Does not affect rubber,
plastic or paint. Sold each.
3750105 0.5 Liter aerosol can . . . .$6.95
3750076 0.75 Liter aerosol can . .$9.95
Moto Polish
Helmet Care
Cleaning foam and care for helmet
shells and inner padding. Cleans,
deodorizes and protects. Removes
dirt and brightens colors. Also
gives the helmet a pleasant, fresh
smell. Sold each. . . . . . . . . . . .$5.95
High-gloss polish for all
types of paint. Freshens
colors and gives them lasting gloss and protection.
Sold each. . . . . . . . . . . .$7.95
3750064 0.2 Liter can
Engine
Gaskets
Tranny
& Clutch
Viso-Clean
Carburetor Cleaner
Cleans air intake, vent tubes, carb
body and bowl. Suitable for all
carburetors. Sold each. . . . .$6.95
Clean & Polish
Cleans and seals all metal, synthetic
and painted surfaces. Smudge-free,
long lasting shine. Do not use on
tires, brakes, footrests, handgrips or
seat cushions! Sold each. . .$7.95
Quickly and effectively loosens and
removes dirt and bugs.
Ride safely thanks to a
smudge free, clear view
and protection with antifogging treatment.
Sold in a box of twelve packets of six.
3750058 Twelve 6-packs . . . . . . . . . . . . .$4.95 each
Driveline
Wheels,
Tires
& Brakes
Frames
MotoClean 900
Accu-Contact Spray
Protects battery poles, clips,
connectors, motor connections
and starter connecting cables,
and prevents contact resistance
and voltage drops. Prevents corrosion by battery acid and
weather. Provides a long-lasting, wax-like protective film.
Great for any service department. Sold each. . . . . . . . . .$7.95
Leather Spray
Cleans leather clothing both effectively and gently. Removes dirt and
oil, impregnates leather and keeps
it supple. Sold each. . . . . . . .$5.95
The motorcycle cleaner
with power! Quick,
clean and completely
biodegradable. Just
spray on a cold machine,
let it work and rinse off.
Does not affect rubber,
paint or plastic. Kit is
complete with sprayer,
sponge and cloth.
Sold each.
3750055 1 Liter kit . . . . . . . . . . . . . . . . . . . . .$10.95
3750056 1 Liter refill . . . . . . . . . . . . . . . . . . . .$8.95
3750057 5 Liter refill . . . . . . . . . . . . . . . . . . .$43.50
17.23
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Motorcycle Care Products
C.C. Rider®
Brake Fluid
High-quality DOT 5 silicone
brake fluid for all drum and
disc brake systems. Will not
damage custom paint creations. Withstands high
temperatures and is compatible with current systems. . . . . . . . . . . . .$8.49 each
35026 8-oz. bottle
(case of 6)
Pela 6000 Oil Extractor
K&N Recharger Filter
Care Service Kit
This easy six-step maintenance system was
designed to service your K&N air filter. The kit
completely cleans and restores air flow efficiency so that your filter performs like new. Each kit
contains one 12 ounce squeeze bottle of filter
cleaner and one 61/2 ounce aerosol can of filter
oil. Use this recharger kit on a regular basis and
you‘ll never buy another filter again. . . . . . .$13.99
13016 K&N filter cleaner and oil kit
Great for those who hate removing the exhaust
to change transmission oil, and also handy for
primary oil changes. It eliminates the need to
remove drain plugs or tilt your bike when
changing oil. Simply insert the the probe into
the filler neck or inspection plug and pump a
few times to create a vacuum. The calibrated
walls of the see-through container let you measure the amount of oil you extract. Holds up to
1.57 gallons (6 liters). . . . . . . . . . . . . . . . . . . . .$59.99
20987 Measures 211/2"-tall x 9"-diameter,
with a 3/16" o.d. by 82"-long hose)
Note: This product is absolutely NOT for use with gasoline,
kerosene or any other highly-flammable fluids.
11798
Seal-N-Air
An effective temporary flat tire repair for tube
and tubeless tires. Small enough to be carried in
a motorcycle saddlebag. Motorcycle use only.
Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.62
3911045 6 oz. aerosol can
General
No Fog and ‘Rain Away’
Visor Treatment Fluids
17.24
UNI Filter Oil and Cleaner
UNI Filter Cleaner was designed to be used on
all Original Equipment and performance air filters. Just spray it on, let it soak in for 3 minutes,
and rinse with water. Then spray with UNI Spray
Oil, and you’re done. It’s that simple. UNI filter
cleaner is biodegradable, so it won’t harm the
filter or the environment.
11798 Filter oil (7.5 oz. can)
case of 12 . . . . . . . . . . . . . . . . . . . .$5.00 each
11799 Filter cleaner (16 oz. can)
case of 12 . . . . . . . . . . . . . . . . . . . .$6.67 each
Note: Due to DOT regulations, these products cannot be
shipped by air freight
Greatly improve visibility in rain or fog.
Rain Away is a clear glass coating for visors,
windshield and car windscreens. It helps rain,
sleet, snow and dirt slide away from the surface.
No Fog cleans and prevents fogging on car
windshields, face shields, goggles, etc. Just apply
to glass, let dry, buff if necessary.
85014 Rain Away (118 ml bottle)
sold each . . . . . . . . . . . . . . . . . . . . . . . . .$11.29
85013 No Fog (118 ml bottle) sold each . . .$7.10
17
11799
Slick50 Engine/Transmission
Treatment
Unique chemistry bonds specially processed
DuPont Teflon/PTFE to the metal parts of your
engine and transmission, creating smoother
surfaces with lower friction and less wear.
This remains through successive oil changes
lasts for 80,000 km. For 4-stroke engines
and transmissions.
85011 For 4-stroke engines, 300ml bottle
85012 For transmissions, 80ml bottle
Permatex® Products
Apparel
Low Strength
Threadlocker PURPLE
Medium Strength
Threadlocker BLUE
A must for securing small fasteners from 1/4" to 1". It is
non-corrosive making it perfect for lens mount bolts,
master cylinder cover bolts, etc. (repl. OEM 99811-97).
Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
35044 6ml tube
An all-purpose, medium-strength
threadlocker that locks and seals most
hardware from 1/4" to 1". Seals against
air, oil, fuel and hydraulic leaks. PreSeats
vents loosening and thread corrosion.
& Bags
Easy disassembly with regular hand
tools (repl. OEM 99642-97). Sold each.
35007 6ml tube . . . . . . . . . . . . . . . . .$6.89
35120 36ml tube . . . . . . . . . . . . . . .$32.99 Foot
Bike Kits
& Trailers
Controls
High Strength
Threadlocker RED
Surface Insensitive
Threadlocker BLUE
A high-strength formula for heavy-duty
applications. Adds 3,000 psi holding
power on slip and press fit assemblies,
and prevents leakage. Restores fit to
worn bearing housings and close-fitting assemblies. Parts removal requires
extra effort (repl. OEM 99671-97).
Sold each.
35008 6ml tube . . . . . . . . . . . . . . . . .$6.89
35038 36ml tube . . . . . . . . . . . . . . .$32.99
Hand
Controls
Medium/High strength threadlocker for
general purpose applications. Well-suited for 1/4" to 3/4" fasteners that have
a slight oil film (repl. OEM 99642-97).
Sold each. . . . . . . . . . . . . . . . . . . . . . . .$9.49 Lighting
35036 6ml tube
Electrical
High-Temperature
Thread Sealant
Locks and seals threaded fittings.
Resists leakage, vibration loosening,
moisture, hydraulic fluids and diesel
fuels. It lubricates threads for easy
assembly or disassembly and won’t
shred or wear like Teflon® tape. Parts
can be repositioned up to 4 hours
after application. Sold each.
35004 6ml tube . . . . . . . . . . . . . . . . .$6.49
35146 50ml tube . . . . . . . . . . . . . . .$18.49
Exhaust
Surface Prep
Speeds cure of Permatex® Threadlockers by 50%.
Increases threadlocker strength. Recommended for cold
weather use. General purpose solvent for cleaning and
preparing parts and surfaces. Sold each. . . . . . . . . . .$18.50
Intake
Engine
Gaskets
Anti-Seize Lubricants
A highly-refined blend of aluminum,
copper and graphite lubricants that
prevents galling, corrosion and seizing,
and assures easier disassembly.
Temperature range is -60°F to 1600°F. It
can also be used to ensure easy
removal of spark plugs, cylinder head
and exhaust bolts, and lubricate sliding
caliper disc brakes
(repl. OEM 98960-97). Sold each.
35014 1 oz. tube . . . . . . . . . . . . . . .$4.29
35028 8 oz. brush-top bottle . .$12.49
Ultra Bond™ Super Glue
This gel formula super glue was designed for fast,
heavy-duty repairs to vertical surfaces where reg- Tranny
& Clutch
ular adhesives run. Bonds close-fitting surfaces
instantly, and sets quickly to form a permanent,
transparent bond. Effective on metal, rubber,
glass, aluminum, ceramics, vinyl, alloys, plastics
and other non-porous surfaces. Ready-to-use and
Driveline
no heat or clamps are required. Sold each. . . .$3.49
35037 2 gram tube
Wheels,
Tires
& Brakes
Hylomar® Gasket Dressing Compounds
Frames
For holding gaskets in place during assembly. Temperature range
is -60°F to 600°F and it resists fuels, lubricants, water and related
engine fluids. Sold each.
Hylomar® Aerosol
This non-hardening, high-temp sealant is the ultimate gasket
dressing for pre-cut gaskets. Ideal for threaded fittings where
thread locking is not desired (repl. OEM 99651-85). . . . . . . . . . .$9.49
Forks
& Shocks
Sheetmetal
Hylomar® HPF Gasket Dressing and Flange Sealant
An exceptional high-tack gel seal-ant that is non-hardening,
permitting easy disassembly of flanged components even
after long-term operation. No-run formula is compatible with
flanged surfaces and mechanical gasketing materials (repl. OEM
99653-85). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.99
35045 1 oz. tube
General
Note: Due to DOT regulations, CC #35116 cannot be shipped by air freight.
17.25
Cross
Reference
Permatex® Products
Instant Gas Tank Repair
Cold Weld Bonding Compound
A 15-minute, two-part adhesive and filler
system that eliminates the need for welding or
brazing. It can be drilled, sanded, painted and
filed once it has cured, and resists most automotive and shop fluids. It withstands temperatures
to 350°F (intermittent), and has over 3,000 psi
shear strength on steel. Works on aluminum,
steel, brass, bronze, castings, stampings and
casting cracks. Sold each.
35023 Two 1 ounce tubes . . . . . . . . . . . . . . . . .$7.19
Instantly seals holes in gas tanks without tank
removal. Sticks to gasoline-wet metal. Dries to
hard seal. Hardens in 60 minutes. Easy to use,
two-part epoxy ribbon.
Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.07
3921022 1 ounce stick
Anaerobic Gasket Maker
Gasket Remover
Quickly removes even baked-on gaskets and all types
of gasketing adhesives and sealants. Removes gaskets
from any type of assembly in 10 to 12 minutes.
Prepares metal parts for new gaskets and assembly.
Reduces scraping and sanding and eliminates damage
to mating surfaces. Sold each.
35021 12 oz. aerosol can . . . . . . . . . . . . . . . . . . . . . . .$6.49
A flexible, non-corrosive gasketing
material for use on aluminum, iron and
steel machined mating surfaces. It is
anaerobic (cures in the absence of air)
and will eliminate preformed, pre-cut
paper, rubber and cork gaskets. For
assemblies with less than .015" gap
between mating surfaces. Sold each.
35011 6ml tube . . . . . . . . . . . . . . . . .$6.49
Note: Due to DOT regulations, this product cannot be shipped by
air freight.
MotoSeal® Gasket Maker
Solvent-based bond that fully seals within
20 minutes. 350°F continuous and 400°F
intermittent. Resistant to gasoline and
high temperatures. Performs well at low
temperatures and forms a tough, flexible
bond that is highly effective on uneven
joint surfaces. Sold each. . . . . . . . . . . .$4.89
35016 2.7 ounce tube
Fast Break® Super Penetrant
Heavy-duty penetrant for rusted and frozen assemblies.
Works quickly to penetrate and loosen rust, grease, dirt,
carbon deposits and corrosion from metal parts.
Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.25
Copper Spray-a-Gasket®
General
Pro-Strength Brake and
Parts Cleaner
Penetrates and removes oil, grease, dirt and corrosion from brake parts. Fast drying non-corrosive
formula is residue free. Sold each. . . . . . . . . .$5.69
Note: Due to DOT regulations, this product cannot be shipped by
air freight.
A high-temperature adhesive
gasket sealant that is fast-drying and puts a
metallic copper layer on gaskets to dissipate
heat, prevent gasket burnout and improve
heat transfer. It fills hot spots and minor surface irregularities instantly. It’s temperature
range is up to 500°F, and it resists all types of
automotive fluids. Sold each. . . . . .$8.99
17
17.26
Permatex® Products
Apparel
Silicone Gasket Makers
Bike Kits
& Trailers
Ultra Black® RTV Silicone
Fast curing formula is low odor and noncorrosive, and has the ability to retain it’s high flexibility and oil resistance properties through the
use of a patented adhesion system. Temperature
range is -75°F to 600°F intermittent. Sold each.
35117 3.35 oz. tube . . . . . . . . . . . . . . . . . . . . .$7.99
Ultra Copper® RTV Silicone
Specially-formulated for high-performance
engines. It is the most advanced, high-temperature RTV silicone gasket available. It features
low odor and is noncorrosive with superior
adhesion. It is three times more oil resistance
than conventional silicones, has eight times the
flexibility of cut gaskets and it’s temperature
range is -75°F to 700°F (intermittent). It resists
most auto and shop fluids and vibration.
35012 3 oz. tube (repl. OEM #99815-97) .$7.99
500198 3 oz. tube (pack of 12) . . . . . . . . . . .$81.99
Blue RTV Silicone
The original ‘Blue’ gasket maker first introduced
in 1970. Replaces almost any cut gasket and
makes reliable “formed-in-place” gaskets that
resist cracking, shrinking and migrating. Can
also be used to coat pre-cut gaskets to increase
reliability. Temperature stable to 500° (intermittent), and resists most shop fluids. Sold each.
35010 3 oz. tube . . . . . . . . . . . . . . . . . . . . . . . .$6.49
Seats
& Bags
Foot
Controls
The Right Stuff by Permatex®
Hand
Controls
This gasket maker seals instantly, and forms
reliable, long-lasting elastomeric rubber gaskets.
Sensor-safe. Powertrain fluid resistant (oil,
coolant and ATF). Used on OEM production lines
Lighting
and outperforms pre-cut gaskets. For easier use,
Permatex® caulking gun is recommended when
using the Right Stuff. Sold each.
30065 5 oz. cartridge . . . . . . . . . . . . . . . . . . .$16.99
30066 Caulking gun . . . . . . . . . . . . . . . . . . . . .$7.29 Electrical
Exhaust
Intake
Clear RTV Silicone
Adhesive Sealant
Engine
A general purpose, clear RTV indoor/outdoor
sealant. Seals, bonds, repairs, mends and secures
glass, metal, plastics, fabric, and vinyl. Tough but
flexible, with a temperature range of -75°F to
400°F, and resists oil, water, weather, vibration
and grease. Sold each. . . . . . . . . . . . . . . . . . . . .$6.49
35001 3 oz. tube
Gaskets
Liquid Electrical Tape
The latest breakthrough to seal
and protect electrical connections
in wet and corrosive conditions.
• Forms a protective dielectric coating
of flexible vinyl
• Totally seals out moisture to prevent corrosion
• Hold wire terminal together – prevents loose
connections due to vibration
• Applicator brush cap is easy to use
• Works with all metal, plastic, vinyl, rubber
and composite surfaces . . . . . . . . . . . . . . . .$8.49
500328 4 oz. can (sold each)
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Permatex® Silicone Stripper
Permatex Silicone Stripper is a gel formula gasket remover. It cleans
and removes gasket residue in 5 minutes! No grinding is required.
When finished, wipe residue with a dry rag and you’re all set to go.
It’s as easy as that! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99
30064 2 oz. tube
Frames
Forks
& Shocks
Sheetmetal
General
17.27
Cross
Reference
Nelson-Rigg Motorcycle Covers
Nelson-Rigg has been manufacturing quality, 100% waterproof covers since 1972 and has the only true “No-Hassle”
Lifetime Warranty in the industry. All covers come with a
convenient pouch to carry and store your cover in and are
UV treated to prevent fading (except for the econo and dust
covers).
Fitment Chart
General
Model
Sportster® models
Dyna Glide® models
FX Softail® models
Heritage Softail® models
Fat Boy® models
Road Glide® models
Road King® models
Electra Glide® Classic /
Ultra Classic® models
Electra Glide® models
Tour Glide® Classic /
Ultra Classic® models
Tour Glide® models
V-Rod® models
17
Defender
M
L
L
XL
L
XL
XL
Cruiser
M
L
L
XL
L
XL
XL
Deluxe
M
L
L
XL
L
XL
XL
XXL
XL
XL
XXL
XL
XXL
XL
L
XL
L
XXL
XL
L
Falcon Defender® 2000
The Ultimate World Class Cover!
• Made from full-strength UV-treated "Tri-Max®" polyester
• Seams electronically heat sealed making cover 100% waterproof
• Heat shield lower panels and soft windshield protector
• "Perma-Venting®" system prevents condensation build-up
• Snug elastic bottom with 1" grommets
• Packed into it's own tough backpack
• "No-Hassle" lifetime warranty
• Available in black with silver
• Sizes available to fit every model
622000 Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.95
622001 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$75.95
622002 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
622003 XX-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.95
• Made from medium weight top
quality UV-treated "Tri-Max®"
polyester
• Seams electronically heat sealed
making cover 100% waterproof
• Heat shield lower panels and soft
windshield protector
• "Perma-Venting®" system prevents
condensation build-up
• Snug elastic bottom with 1"
grommets
• Packed into matching carry-all
• 5-year "No-Hassle" warranty
622004 Medium . . . . . . . . . . . . . .$59.95
622005 Large . . . . . . . . . . . . . . . . .$65.95
622006 X-Large . . . . . . . . . . . . . . .$69.95
622007 XX-Large . . . . . . . . . . . . .$74.95
Grey color fabric to reflect heat better
640136 Medium . . . . . . . . . . . . . .$59.95
640137 Large . . . . . . . . . . . . . . . . .$65.95
640138 X-Large . . . . . . . . . . . . . . .$69.95
640139 XX-Large . . . . . . . . . . . . .$74.95
Falcon Cruiser Cover
• Made from medium weight top quality "Tri-Max®" polyester
• Seams electronically heat sealed making cover 100% waterproof
• "Perma-Venting®" system prevents condensation build-up
• Optional fold away backrest pouch
• Packed into matching carry-all
• Fits most cruiser style bikes
622008 Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$65.95
622009 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.95
622010 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.95
17.28
Apparel
Deluxe All-Season Cover
• Made from water resistant lighter weight "Tri-Max®" polyester
• Ventilation system prevents condensation build-up
• Packed into it's own attractive matching carry-all
622011 Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.95
622012 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$47.95
622013 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$51.95
622014 XX-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.95
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
UV-2000 1/2 Cover
• Specially treated "UV Protected" nylon
• Blocks out 99% of sun's harmful UV rays and protects against all
natural elements
• All seams electronically heat sealed to be completely 100% waterproof
• Snug elastic bottom allows for snug fit on all shapes
• Sewn in elastic bungees for universal mounting
• Packed into it's own fanny pack
• When folded, it's small enough to fit in almost any
storage compartment
• Sizes available to fit almost every bike
622015 Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.95
622016 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.95
622017 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.95
Electrical
Exhaust
Intake
Engine
Gaskets
DC-500 Dust Cover
Protect your bike from dust and spills when garaged.
• Made from a breathable soft non-scratch brushed Poly/Cotton
• Folds to fit in small compartment or saddlebag for storage
• Available in light blue
• Sizes available to fit almost every bike
622018 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.95
622019 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.95
622020 XX-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.95
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Falcon Cruiser 428 Cover
• Made from light weight Tri-Max polyester which can be packed tighter
for road trips.
• Water resistant
• Heat shield lower panels
• Windshield protector
• Built in air ventilators
• Packed into matching carry all
• Backrest pouch folds neatly into cover with not used
• 2-Year “No Hassle” warranty
640116 Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$45.95
640117 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.95
640118 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.95
®
Forks
& Shocks
Sheetmetal
General
17.29
Cross
Reference
Guardian® Motorcycle Covers
Dowco Fitment Chart
Model
Secure
Sportster® models
M
Dyna Super Glide®
M
Dyna Glide®
(All except Super Glide®)
L
FX Softail® models
L
Heritage Softail® models
XL
Fat Boy® models
L
Road Glide® models
XL
Road King® models
XL
Electra Glide® (All models)
XL
Tour Glide® (All models)
XL
V-Rod® models
L
EZ Zip Weather All
M
M
XL
XL
XL
XL
XL
L
L
XL
L
XL
XL
XL
XL
L
Duster
M
L
Ultralite
L
L
L
L
XXXL
L
XXXL
XXXL
XXXL
XXXL
L
XL
XL
XL
L
XL
XL
XL
XL
L
Traveler Storeaway
L
SPORT
L
TOUR
TOUR
TOUR
TOUR
TOUR
TOUR
TOUR
TOUR
TOUR
XL
XL
XL
L
XL
XL
XL
XL
L
PVC
L
L
XL
XL
XL
L
XL
XL
XL
XL
L
Guardian® Elite™ Series Motorcycle Covers
Guardian® Elite™ motorcycle covers set the standard against which others
are compared.
• Constructed of heavy-duty polyester with DOWCO’s exclusive
ClimaShield™ Plus fabric protection with
Guardian®
Color-Lok™ fade resistance and Moisture Guard™ Vent System EZ Zip
• Scorch-resistant aluminized panels protect
Cover
the hot parts of the motorcycle and spe(Fully
cial soft fabric liner prevents scratching
Zipped)
of the windshield
Lifetime
Warranty
• Cover seams are sealed with tape to
make the cover waterproof
• All Guardian® Elite™ covers include
an elastic shock cord that is sewn
into the bottom hem to insure a
snug fit
• Lockable grommets, which enable
the use of a cable lock (cable lock not
included), line the bottom of the cover
• An under-bike web strap with a D-ring
attachment helps to keep the cover
secure
• Convenient storage bag included
Guardian® EZ Zip Cover
Lifetime Warranty
Guardian® EZ Zip™ Motorcycle Covers
The Guardian® EZ Zip™ motorcycle cover includes a zipper located at the
rear of the cover that makes installation fast, easy and convenient.
• Includes all the features and benefits of the Guardian® Elite™ series of
motorcycle covers
• Covered by a limited lifetime warranty
• Available in sizes to fit most cruiser and touring motorcycles
8151513 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.95
8151514 XX-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$124.95
8151525 XXX-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$129.95
Guardian® WeatherAll Plus Secure and Standard Cover
Lifetime Warranty
General
Guardian® Secure™ Motorcycle Covers
17
Guardian® Secure™ covers will not only shield your vehicle from “prying
eyes” and the elements, but will also sound an alarm whenever anyone
tries to remove the cover.
• Includes all the features and benefits of the Guardian® Elite™ series of
motorcycle covers
• Includes a self-contained alarm system that emits a 130 dB warning
sound when someone attempts to remove the cover without deactivating the alarm
• Use of this alarm system does not require any modifications to your bike,
no special wiring or attachments are required, and installation is quick
and easy
• A one year limited warranty applies to the Guardian® Secure™ cover
alarm. Patent pending
8151530 Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.95
8151531 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.95
8151532 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.95
8151533 XXX-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$129.95
17.30
Guardian® Trike Cover
Lifetime Warranty
Guardian® Weatherall™ Plus Motorcycle Covers
Guardian® Weatherall™ Plus covers come with a limited lifetime warranty
plus all the features and benefits of the Guardian® Elite™ series motorcycle
covers.
8151017 Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$76.95
8151009 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $84.95
8151001 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$94.95
8151105 XX-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$104.95
8151106 XXX-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$114.95
8151512 Trikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.95
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Guardian® Duster Cover
Lifetime Warranty
Guardian® Storeaway Cover
2 Year Warranty
Guardian Duster Motorcycle Covers
®
™
This simple cotton cover keeps motorcycles dust-free when stored indoors.
• Natural cotton materials are “breathable” to let potentially harmful
moisture escape
• Includes locking grommets and a convenient storage bag
• Available in sizes to fit most motorcycles
• Comes with a limited lifetime warranty
8151517 Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.95
8151518 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.95
8151519 XXX-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
Electrical
Guardian® StoreAway™ Motorcycle Covers
Protect your vehicle from dust and dirt when being stored indoors with our
inexpensive Guardian® StoreAway™ cover.
Exhaust
• This universal cover is from a soft, breathable material so it won’t scratch
the finish of the motorcycle and lets the potentially harmful moisture
escape from the cover
• Includes a two-year limited warranty
8151521 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.95 Intake
8151522 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.95
Engine
Gaskets
PVC Cover
1 Year Warranty
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Dowco Custom Bike Covers
PVC Motorcycle Covers
A basic motorcycle cover constructed of heavy-duty PVC plastic to protect
the motorcycle from the elements.
• 100% PVC construction means a cover that is 100% waterproof
• Includes grommets in the hem to allow for the use of a motorcycle locking device
• Vented to allow unwanted moisture to escape
• Includes a one-year limited warranty
8151523 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.95
8151524 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$23.95
The only bike cover designed specifically to cover custom, and chopper
motorcycles. Heavy-duty indoor cover protects your custom bike from dust
and dirt. Soft cotton inner liner fabric prevents scratching. Breathable fabric allows moisture to escape. Each cover is lockable and comes with a storage bag.
630440 Covers most customs and chopper models 109"in length . . . . . .$104.99
630441 Covers most customs and choppers models 72" in length . . . . . .$104.99
Frames
Forks
& Shocks
Sheetmetal
General
17.31
Cross
Reference
Guardian® Traveler
2 Year Warranty
Guardian® Weatherall Cover
Lifetime Warranty
Guardian® Traveler Motorcycle Covers
The lightweight Guardian® Traveler™ cover protects the essential parts of
the motorcycle and folds compactly for storage.
• Made of light-weight, but durable, urethane coated polyester, the covers are water repellent and quick drying
• Cover will encloses the fairing, seat and rear trunk
• Includes a shock cord hem and foot peg straps
• Covered by a two-year limited warranty
8151160 Tour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.95
8151520 Sport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.95
Guardian® Weather All™ Series Motorcycle Covers
• Guardian® Weatherall™ Motorcycle Cover
• Similar to the Weatherall™ Plus but with medium polyester instead of
heavy-duty polyester and Climashield™ instead of Climashield™ Plus
8151024 Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.95
8151016 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.95
8151008 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
8151109 XX-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.95
8151110 XXX-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95
8151516 Sport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
8151008
Guardian® UltraLite Cover
2 Year Warranty
Guardian® Ultralite Motorcycle Covers
General
8151001
17
‘Protector’ Bike Covers
Gray covers feature lightweight waterproof material and a canvas heat
shield to protect against hot pipes. The hem is elastic for a snug fit and
grommets in the hem work great for securing the cover against the wind.
8151008 Fits FL, FLT, FLHT, FLHS and Buell® S3 and S3T models . . . . . . .$79.95
8151024 Fits Sportster®, FX, FXR and Buell® X1 and M2 models . . . . . .$69.95
Guardian® UltraLite™ Motorcycle Cover
This light duty full size cover is an excellent choice traveling, mild climates
or indoor storage.
• Constructed of lightweight polyester material that is water repellent
and quick drying
• Features locking grommets for added security and a shock cord hem
• Includes a convenient storage bag
• Fits sport bikes up to the largest touring bikes
• Covered by a two-year limited warranty
8151120 Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.95
8151124 X-Large . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.95
‘Guardian’ Premium Bike Covers
Features heavy black poly, water-repellent coating, moisture vent, shock
cord for a tight fit and aluminized scorch-resistant panels.
8151001 Fits FL, FLT, FLHT, FLHS and Buell® S3 and S3T models . . . . . . .$94.95
8151017 Fits Sportster®, FX, FXR and Buell® X1 and M2 models . . . . . .$76.95
8151009 Fits XL, FX, FXR, FXD and Softail® models w/bags . . . . . . . . . . .$84.95
8151105 Fits full size dresser models with windshield . . . . . . . . . . . . . .$104.95
17.32
Motorcycle Covers
Apparel
Bike Kits
& Trailers
‘Bike Shield’ Bike Cover
• Not just an ordinary bike cover!
• Made of heavy-duty multi-ply
polyethylene with patented Zerust®
corrosion inhibitors to keep corrosion from forming on metal surfaces for up to 5 years
• Water and mold proof, and includes carrying bag
• Bike Shield is easy to use and is durable
• No tubes, bars or wires for assembly, just roll bike
on the shield's floor pad and pull cover over
motorcycle to zip up
• Available with soft inner-liner or without
Seats
& Bags
Foot
Controls
Hand
Controls
For all Models except
Touring Models
645070 Bike Shield 135" x 70"
without liner . .$169.95
645071 Bike Shield 135" x 70"
with liner . . . . . .$289.95
Lighting
For all Touring Models
645072 Bike Shield 145" x 70"
without liner . .$189.95
645073 Bike Shield 145" x 70"
with liner . . . . . .$299.95
Electrical
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Custom Chrome® Nylon Bike Cover
Designed to protect your bike’s finish during storage. Nylon material is
double stitched in a bright orange and black pattern. The top of the cover
has a Velcro®-sealed vent flap, and the bottom edge is fitted with a spandex insert, ensuring a trim, snug easy fit. Made in a single, wide application
style, the cover will fit almost every application except those with the windshield/fairing or Tour-Pak®. Cannot be put onto bike that is still hot from
operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$51.49
25952 Bike cover
Dry Rider® Motorcycle Cover for ‘Touring’ Models
Frames
Keep your big twin clean and protected from the elements with this heavyweight cover from Dry Rider®. Heat shields near the bottom protect against
hot pipes and the soft flannel lining will protect your paint and windshield
from scratches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$67.99
400012 Silver. Fits all ‘Touring’ models
Forks
& Shocks
Sheetmetal
General
17.33
Cross
Reference
Motorcycle Covers & Accessories
180183
180185
Flag Holder and Seat Screw Kit
Chrome aluminum bracket and flag holder kit fits
most Big Twin and Sportster® models 1972-up
without trunk. Mounts on top of the rear seat tab
with stock screw. Available with single or dual flags.
180182
Mounts on seat tab of most Big Twin and
Sportster® models from 1972 to present
180182 USA flag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99
180183 USA flag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.99
Mounts on trunk tab of most Tour-Pak®
models from 1986 to present
180185 USA flag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.99
310604
310601
Custom Chrome® Protective Fender and Tank Covers
General
If you’ve ever nicked your paint with a dropped screwdriver or wrench
when working on your bike, you’ll understand what a great idea these covers are (if you haven’t, you’ll probably find out soon). Professional repair
shops put them on customer’s bikes for every job, no matter how minor.
The tank covers have a clear pouch that attaches with Velcro® fasteners to
hold job-tickets, keys, or small tools. They’re American-made from tough
vinyl with a soft cloth liner for a gentle but secure fit, and are available in
sets which include front fender and tank covers for Big Twin and Sportster®
models, or individually.
25866 Big Twin tank and fender set
(Fat Bob tanks and 16" front wheel) . . . . . . . . . . . . . . . . . . . . . . . . .$67.99
25868 Tank/fender cover set for Sportster® models (1984 thru 2003) .$60.99
24995 Tank cover for Fat Bob tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$38.99
24996 Fender cover for 16" wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.99
25867 Fender cover for 19" & 21" wheels (1984 to present) . . . . . . . . .$31.99
Clocks and Thermometers by Formotion
Tired of seeing motorcycle clocks and thermometers that look like refugees
from a refrigerator door? Satisfy the basic desire to know time and temperature with these good looking, high-quality instruments.
• 1.55" diameter chrome housings with matte black bezels
• Available with black face or LumiGlow face
• Waterproof and freeze resistant
• Clocks feature accurate quartz movement – use long-lasting
button cell battery (included)
• Thermometers read in both Fahrenheit and Centigrade
• Optional handlebar mounting brackets available separately
310601 Thermometer with black face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99
310602 Thermometer with LumiGlow face . . . . . . . . . . . . . . . . . . . . . . . . . .$47.99
310603 Clock with black face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99
310604 Clock with LumiGlow face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$47.99
310605 Handlebar mount for 7/8"-diameter bars . . . . . . . . . . . . . . . . . . . . .$8.99
310606 Handlebar mount for 1"-diameter bars . . . . . . . . . . . . . . . . . . . . . . .$8.99
310607 Handlebar mount for 11/4"-diameter bars . . . . . . . . . . . . . . . . . . . . .$8.99
‘Bike Foot’ Kick Stand Support
Durable ABS pad protects tile, carpet and wood floor coverings from
kick stand damage. Perfect for showrooms or your home garage. . . . .$6.49
400410 Sold each
Skull Trailer Hitch Cover
by Skull Enterprises
• Awesome 3-D skull face design
• Made of aluminum die-cast
• Fits 2" square class 2 and class 3 trailer hitches . . . . . . . . . . . . . . . . . . . .$35.49
637736 Sold each
17
17.34
Locks
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
American® Padlocks
American-made locks with hardened-steel cases
and shackles, and 7-pin tumblers with standard
brass keys. Hardened-steel locking balls make
them virtually impossible to force with bolt cutters, crowbars or sledgehammers.
19629 Short shackle . . . . . . . . . . . . . . . . . . . . .$34.99
19630 Long shackle . . . . . . . . . . . . . . . . . . . . .$36.99
Xena Disc and Cable Alarm Lock
• You can utilize the cable to secure your bike
to any solid object, or link bikes together
• Alarm lock can also be used as a disc lock, in
either case, your bike is alarmed and locked
• Cable measures 61/2 feet with high tensil steel
cable and protective molded sleeve to protect
against scratches
• Sold each
644840 Disc and cable alarm lock . . . . . . .$149.99
‘Krypto’ Disc DFS Locks
by Kryptonite®
Hand
Controls
Inserts into the brake rotor
vent holes to prevent rolling or ride-away theft.
Features a drop forged 10mm angled-pin and
tubular keyway for superior resistance.
33940 Orange (not shown) . . . . . . . . . . . . .$37.49
33941 Yellow . . . . . . . . . . . . . . . . . . . . . . . . . .$38.99
33942 Chrome with carry pouch . . . . . . . .$42.99
Lighting
Electrical
Exhaust
Intake
33924
Engine
Pingel® Padlock
Specially-made for short-term security needs.
You can use this lock on forks with Original
Equipment triple trees. Once installed, it’s
impossible to turn your front wheel, making it
difficult to steal your bike. Chrome-plated.
84053 Sold each . . . . . . . . . . . . . . . . . . . . . .$32.95
‘Krypto’ Disc Brake Lock
by Kryptonite®
Gaskets
Prevent ride or roll-away theft. Securely attaches
to disc rotor vent holes with hardened-steel
shaft. High-security cylinder lock prevents picking.
33997 Chrome finish . . . . . . . . . . . . . . . . . . .$24.49 Tranny
33996 High-visibility yellow . . . . . . . . . . . . .$22.99 & Clutch
Driveline
400049
Wheels,
Tires
& Brakes
633994
400082
Frames
Xena Disc Lock Sensor Alarms
Stainless Steel Security Padlock
Small, hardened steel shackle limits access of
burglar tools because of the size of its opening.
This lock, with its seven-year warranty, features
a laser-welded stainless steel case, a doublebolted hardened shackle and a solid brass fourpin tumbler mechanism. . . . . . . . . . . . . . . . . .$21.99
19631 Replaces OEM 45738-86T
The ultimate disc brake lock. Features an ear
piercing shock sensing alarm. Not only will the
alarm sound if the bike is moved, but also if you
try to ride off without remembering to remove
your lock. High-security lock uses virtually pick
proof 7-pin cylinder lock and key.
633994 Standard (stainless steel) . . . . . . . . .$79.99
33924 Standard (yellow/black) . . . . . . . . . .$78.99
644841 Micro-Mini
(stainless steel) . . . . . . . . . . . . . . . . . .$79.99
33973 Micro-Mini (yellow/black) . . . . . . . .$79.99
33979 Replacement battery . . . . . . . . . . . .$12.49
Forks
& Shocks
400081
Disk Brake Locks
Hardened carbon steel, prevents wheel rotation. SheetTamper proof barrel key.
metal
400081 Yellow . . . . . . . . . . . . . . . . . . . . . . . . . .$28.99
400082 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.99
400049 Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.99
General
17.35
Cross
Reference
Locks
Master Lock® ‘Street Cuff’
The ‘Street Cuff’ not only looks cool, but is also a perfect device to ensure
security against theft.
• Ideally used to cuff on the fork legs to a secure well-built structure
such as a street pole
• Pry resistant so that bars or jacks won’t stand a chance
• Features a patented lock core with a 10 pin tubular key that is pick
and drill resistant
• Consists of hardened steel construction
• Push button cylinders and pivot links twist and fold making the device
easy to use
• Folds in half for compact carrying or folds to half the size of a U-Lock
• Overall measurement: 211/2", Weight- 2.6 lbs. Cuff measures: 123/4"-long x 3"-wide x 31/2"-diameter
• Available in tough hardened stainless steel
• Lifetime Guarantee!
602000 Street Cuff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$105.99
602001 Stainless Steel Street Cuff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$190.79
Street Cuff Belt Holster
Loops on to your belt for secure attachment while carrying your Street Cuffs.
602002 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.89
Chrome Disc Brake Lock
• Sleek circular chrome plated disk brake lock
prevents roll-away theft
• 1" (26mm) throat with a 3/16" (8mm) shackle
• Easy push button locking system with high
security tubular lock
• Light guide key for easier nighttime use
• Carrying case included . . . . . . . . . . . . . . . .$42.34
602009 Sold each
Master Lock® 2" Disc Brake Lock
• Prevent roll-away theft
• 2" (5cm) throat with a 1/4" (6mm) shackle
• Bright yellow to help remind you to remove
it before riding . . . . . . . . . . . . . . . . . . . . . . .$21.99
602007 Sold each
General
‘Python’ by Master Lock
17
Master Lock® 3" Disc Brake Lock
• Prevent roll-away theft
• 3" (5cm) throat with a 3/8" (10mm) shackle
• Easy push button locking system with high
security tubular lock
• Bright yellow to help remind you to remove
it before riding
• Carrying case included . . . . . . . . . . . . . . . .$24.19
602008 Sold each
17.36
The Motorcycle Club™
The 6" inside width adjusts from 81/2" to 111/2"
in height. The unit completely separates into
two halves for easy use, and the 7-pin circular
key lock is virtually pick-proof. Tough tempered
steel construction with heavy vinyl coating to
protect paint and chrome. . . . . . . . . . . . . . . . .$42.99
20136 The Motorcycle Club™
Cinch it up and lock it down! World’s first fullyadjustable patented cable lock always adjusts
for a perfect fit.
• Made to be more versatile, secure
and convenient
• Features 3-position cinch tight locking
mechanism and patented design that
allows you to adjust the cable length and
snug it up without any back slipping
• Includes 6' cable
• Velcro® tail holder prevents tail from
damaging your bike
• Interchangeable 10mm braided steel cables
made tough to resist any cutting or snapping
• Replacement cables available in 6',12' or 30'
• Lifetime warranty!
602003 ‘Python’ adjustable cable lock . . . .$31.79
602004 6-foot interchangeable cable . . . . .$10.64
602005 12-foot interchangeable cable . . .$19.09
602006 30-foot interchangeable cable . . .$31.79
Locks
A/B
Bike Kits
& Trailers
C
Chains
D/F
G
E
H
Apparel
New York Chain
• Super strong case hardened, tempered boron manganese chain
• Trapezoid link is extra resistant to bolt cutters, saws, chisels, hammers and files
• Weather and heat resistant nylon cover
• Includes yellow EV Disc Lock, one lighted key and two standard keys
New York Noose
• Same chain as New York but with large loop on end
• Cinch design uses less length for effective lockup
New York Fahgettaboudit
• Same features of the New York, yet the ultimate in motorcycle security in high theft areas
• Narrower inner width of individual links prevents leverage attacks
• Triple heat-treated boron manganese steel for ultimate strength with a unique six-sided
hexagonal shape
A
8101008
New York Chain 5' 6" with EV Disc Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$137.95
B
8101021
New York Chain 3' 3" with EV Disc Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$83.95
C
8101045
New York Chain 3' 3" with Molly Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.50
D
8101007
New York Noose 4' 3" with EV Disc Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . .$116.95
E * 8101006
New York Noose 4' 3" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
F
8101046
New York Noose 2' 3" with EV Disc Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
G
8101042
New York Fahgettaboudit 3.3' w/ NY Disc Lock . . . . . . . . . . . . . . . . . . . . . .$113.50
H
8101043
New York Fahgettaboudit 5' w/ NY Disc Lock . . . . . . . . . . . . . . . . . . . . . . .$150.95
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
* Cable or chain does not include lock
Exhaust
P
I
Q
R/S
J
Intake
Engine
T
U
V
Gaskets
K/L
M
Tranny
& Clutch
Cables
N
W
O
X
Sizes large enough to protect bikes and sizes small enough to protect accessories
I
8101020
Super Hard Wire 6' x 3/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$67.50
J
8101034
Hard Wire 6' x 5/8" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.50
K * 8101029
Barbed Wire 5' 6" x 3/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.95
L * 8101017
Barbed Wire 5' 6" x 5/8" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42.50
M
8101018
Super Armored Cable 4' x 1" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$47.50
N
8101012
Krypto Cable IV 6' x 7/16" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.95
O
8101011
Kryptonite Cable and Padlock 6' x 5/16" . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.26
P * 8101028
Kryptoflex 30' x 3/8" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.95
Q * 8101010
Kryptoflex 7' x 3/8" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.20
R * 8101051
Kryptoflex 15' x 3/8" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.50
S * 8101052
Kryptoflex 4' x 3/8" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.44
T * 8101053
Kryptoflex 3/16" x 2.5' Seat Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.32
U
8101049
Gorgon with bracket 2' x 11" x 3/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.95
V
8101050
Resettable Combination Cable 6' x 3/8" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.95
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
Anchor Security
Anchor your valuables in your garage, driveway, sidewalk, etc.
W 8101004
Super Stronghold, in-ground 7.25" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
X
8101005
Stronghold, above-ground 7.5" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
Driveline
17.37
General
Cross
Reference
Locks
Y
Z
AA
BB
CC
DD
EE
FF
HH
JJ
KK
LL
MM
NN
OO
PP
QQ
SS
Disc Locks
New York Disc Lock
• Pik–Safe cylinder
• Includes pouch and Disc Lock Reminder
EV Disc Lock
• Maximum security for high crime areas and lock up situations
GG
• High security tubular keyway
• Includes one lighted and two standard keys
KryptoDisc DFS
• Compact and easy to use with push locking mechanism
• Made of drop forged steel with an extra secure angled pin
KryptoDisco
• Made for small motorcycles, mopeds and scooters
Disc Lock Reminder
• Bright orange cable loops for added reminder and safety
Y
8101002
New York Disc Lock – yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$70.95
Z
8101001
New York Disc Lock – black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$70.95
AA 8101022
EV Disc Lock – yellow with pouch and Disc Lock Reminder . . . . . . . . . . . .$52.95
BB 8101047
EV Disc Lock – orange/yellow with pouch and Disc Lock Reminder . . . .$64.95
CC 8101025
EV Disc Lock – yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.95
DD 8101024
EV Disc Lock – red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.95
EE 8101026
EV Disc Lock – orange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.95
FF 8101027
EV Disc Lock – green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.95
GG 8101023
EV Disc Lock – black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.95
HH 8101048
KryptoDisc DFS – orange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.95
II
8101033
KryptoDisc DFS – chrome with pouch (photo not shown) . . . . . . . . . . . . .$45.95
JJ
8101016
KryptoDisc DFS – yellow with pouch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.50
KK 8101035
KryptoDisc DFS – orange with pouch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.50
LL 8101009
KryptoDisco – chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.95
MM 8101003
KryptoDisco – yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.95
NN * 8101036
Disc Lock Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.55
U Locks and Padlocks
General
New York 3000 MC
• Ultimate security for high theft areas
• 5/8" Kryptonium steel shackle
Stainless Steel Round Padlock
• Armor protected shackle
• Deadbolt locking
• Stainless steel deep welded body for all weather performance
OO 8101041
New York 3000 MC 4" x 10.25" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$86.50
PP 8101031
Stainless Steel Round Padlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $17.95
Trailer Security
Receiver Lock
• High security receiver pin lock secures receiver hitches and trailers
• Snap shut locking mechanism with dust cover
• Corrosion resistant
QQ 8101013
Class 2 Receiver Lock/Pin 3.25" x 1/2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.25
RR 8101014
Class 3 Receiver Lock/Pin 3.25" x 5/8" (photo not shown) . . . . . . . . . . . . .$21.25
SS * 8101015
Hitch Pin Accessory Cable 13mm x 12' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.25
17
17.38
Armed Guard® Alarm & Pager
Apparel
Bike Kits
& Trailers
Seats
& Bags
34001
34003
Foot
Controls
Cable Locks by Kryptonite®
Heavy Duty Hard Wire™
15mm integrated locking cable.
34003 Measures 5/8"-diameter x 6'-long, and
weighs 23/4 lbs. . . . . . . . . . . . . . . . . . . .$49.84
18718
18719
Hand
Controls
Maximum Security Super Hard Wire™
20mm integrated locking cable.
34001 Measures 3/4"-diameter x 6'-long, and
weighs 3 lbs. . . . . . . . . . . . . . . . . . . . . .$63.49
Lighting
Electrical
Exhaust
Maximum Security
Lockdown Anchor
Mounts on any solid surface and cannot be
pried up. Made of case hardened steel, with a
show chrome quality finish. This anchor is tamper proof, bolt cutter resistant and freeze resistant. Works with virtually all range of padlocks,
chains, cable locks and U-locks. Comes with 3
sleeved anchor bolts. Optional adapter rings are
used to sit on top of the cap to make the padlock hole smaller to prevent access to the
anchoring bolts. Useful if you are using a small
diameter chain or cable.
643880 Maximum security lockdown . . . . . .$96.29
643881 Optional adaptor ring (sold each) .$17.60
Emgo Shackle Lock
This heat treated steel shackle lock resists files,
saws or bolt cutters.Vinyl covered to prevent
scratching and comes complete with high-security tubular keys. Point of sale blister packed.
8641548 Shackle Lock . . . . . . . . . . . . . . . . . .$32.50
18720
618731
Intake
Engine
G-Force® Alarm Systems by Armed Guard®
• Feature-rich, superior-quality security
alarm systems are waterproof, and tough as nails
• Multiple sensors detect ignition tampering
and contact with the bike
• Systems are all electronic with no moving parts,
and all sensors and circuits are
vibration-hardened to handle the requirements
imposed by life on a motorcycle
• Ultra-low battery draw (.003 mA)
• Manufactured using latest circuit designs and components
• GF300-HD, GF200-HD and GF200P-HD have connectors to plug in to all Harley-Davidson® models
from 1996 to present, making installation fast and easy
• All G-Force™ alarms feature flashing lights, starter disable, warning LED and 125 dB siren
• 5-year replacement warranty
G-Force® Alarms for Harley® Models from 1996 to Present
18718 GF300-HD – Includes adjustable perimeter sensor, code-hopping remote control,
starter disable, warning LED, impact/tilt sensor and a 125 dB siren . . . . . . . . . . . . . .$274.99
18719 GF200-HD – Includes code-hopping remote control, starter disable, warning LED,
impact/tilt sensor and a 125 dB siren . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$219.99
18720 GF200P-HD – Includes GF200-HD plus a 4w pager with audible and silent
beeper modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$309.99
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
G-Force® Universal Alarm System for All 12-Volt Motorcycles
618731 GF200 – Includes code-hopping remote control, starter disable, warning LED,
impact/tilt sensor and a 125 dB siren . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$189.95
Security
Cable
Lock Set
Heavy duty steel
cable enclosed in a
vinyl sheath.
Contains a 3/16"
x 6' cable with
44 mm steel laminated lock. Perfect
for securing mopeds, motorcycles and ATVs.
8642309 Cable/Lock Set . . . . . . . . . . . . . . . . .$10.79
Forks
& Shocks
Accessories and Replacement Parts for G-Force® Alarm Systems
18722 Additional/extra transmitter for G-Force® alarm systems . . . . . . . . . . . . . . . . . . . . . . . . .$41.99
18709 Proximity/perimeter sensor to upgrade 200 alarms to 300 capabilities
(measures approximately 3" x 2" x 3/4") . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $51.99
18710 Magnetic contact switch for 200 and 300 alarms to add protection to saddlebags,
side covers, seat, etc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.69
18714 Battery back-up for Armed Guard® alarms. Provides up to a 30 minute back-up
power source if alarm power is cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.99
18715 129 dB high-output siren (size approx 3" x 3" x 3") . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.99
18716 125 dB standard replacement siren (measures 2" x 2" x 1.5") . . . . . . . . . . . . . . . . . . . .$19.99
Sheetmetal
General
17.39
Cross
Reference
Armed Guard® Alarm & Pager
G-Force® Alarm Systems by Armed Guard®
• Feature-rich, superior-quality security alarm systems are waterproof, and tough
as nails and works on all 12-volt motorcycles
• Multiple sensors detect ignition tampering and contact with the bike
• Systems are all electronic with no moving parts, and all sensors and circuits are
vibration-hardened to handle the requirements imposed by life on a motorcycle
• Ultra-low battery draw (.003 mA)
• Manufactured using latest circuit designs and components
• All G-Force® alarms feature flashing lights, starter disable, warning LED and 125 dB siren
• 5-year replacement warranty
618731
618730
GF200-U Universal Alarm System
• Code-hopping remote
control
• Starter disable
• Warning LED
• Impact/Tilt sensor
• 125 dB siren
618731 GF200-U . . . . . . . . . . . . . . . . . . . . . . .$189.95
Armed Guard® Sport Alarm
18717
Armed Guard®
Add-on Pager Systems
• Adds long-range paging capability to most
alarm systems.
• AG-PAGER-HD includes plugs which quickly
and seamlessly integrate with the HarleyDavidson® Factory Security System
• Enhance Harley-Davidson® Factory Security
System with this long range (4 watt) pager system. Provides audible or silent (vibration) notification of a triggered alarm within seconds.
• AG-PAGER-HD transmitter designed for water
and high vibration resistance.
• Pager module measures 3" x 1.5" x .6"
618730 AG-Pager-HD . . . . . . . . . . . . . . . . . .$139.95
18717 AG-Pager . . . . . . . . . . . . . . . . . . . . . .$124.95
The smallest self-contained alarm on the market.
• 100% watertight
• Tilt sensor
• Adjustable electronic shock sensor
• 30 minute battery backup
• Stainless steel siren
• Warning LED
• Works with Armed Guard Pager (MS# 18717)
• Includes code-hopping remote control for
activation/deactivation
• Alarm Dimensions: 35/16" x 21/2" x 11/2"
618734 Armed Guard® Sport Alarm . . . . . . .$99.99
618735 Replacement Remote Control . . . . .$35.00
618733
GF300-U Universal Alarm System
• Adjustable perimeter sensor
• Code-hopping remote control
• Starter disable
• Warning LED
• Impact/Tilt sensor
• 125 dB siren
618733 GF300-U . . . . . . . . . . . . . . . . . . . . . . . .$239.95
NOTE: Will not work with Gorilla® alarm systems.
18710
General
18709
17
18722
18714
18715
G-Force® Accessories and Replacement Parts
18716
Upgrades and replacement parts for G-Force Alarm Systems
18722 Additional/extra transmitter for G-Force® alarm systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.99
18709 Proximity/perimeter sensor to upgrade GF200 alarms to GF300 capabilities
(measures approximately 3" x 2" x 3/4") . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$51.99
18710 Magnetic contact switch for GF200 and GF300 alarms to add protection
to saddlebags, side covers, seat, etc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.69
18714 Battery back-up for Armed Guard® alarms. Provides up to a 30 minute
back-up power source if alarm power is cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.99
18715 129 dB high-output siren (size approx 3" x 3" x 3") . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99
18716 125 dB standard replacement siren (measures 2" x 2" x 1.5") . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99
17.40
618732
GF200P-U Universal
Alarm System
• Same features as G-Force 200 plus a 4w pager
with audible and silent beeper modes
618732 GF200P-U . . . . . . . . . . . . . . . . . . . . . . .$309.95
Alarms
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
18700
Hand
Controls
Lighting
Electrical
18701
Exhaust
Slipstreamer Radar Detector Mount
Mounts on 7⁄8" or 1" bars. . . . . . . . . . . . . . . .$27.25
6191508 7/8" handlebars
6191512 1" handlebars
Motorcycle Alarms by Nady
These compact alarms are very easy to conceal. They can be mounted in
any position, and come complete with an alarm unit, siren and all necessary wiring for
an easy hookup. They feature a high/low sensitivity switch, disable override and solid
state electronics. Alarms automatically arm with a 20-second delay when the ignition is
turned off, and resets if disturbed after sounding for 30 seconds. The alarm shuts itself
off when the ignition is turned on. A version of this system with a pager is also available;
the pager can be triggered up to several miles away when the bike is tampered with.
Each comes gift boxed.
18700 Alarm kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$58.99
18701 Alarm kit with page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$194.99
Gorilla® Ultra-Compact
Motorcycle Alarm
Add an effective deterrent against
theft in minutes. Powerful compact
electronic security system features
powerful 120db adjustable 5-tone
siren, 2-stage shock sensor, motion tilt
sensor and current sensor. One 2-button remote transmitter with 100 ft.
range. Includes mounting hardware
and installation instructions for an
easy two-wire hook-up. . . . . . . . .$104.99
18725 Alarm kit
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
17.41
Cross
Reference
Tie-Downs
Ancra™ Tie-Downs
American-made, heavy-duty nylon web
straps are 6' long and have a breaking
strength of 1,200 lbs. Vinyl-coated
hooks. Sold in pairs.
C.C. Rider® Tie-Downs
Rat’Pak
Heavy-duty, patented ratchet buckle
with safety lock.
6681143 Red . . . . . . . . . . . . . . . . . . .$29.95
6681142 Black . . . . . . . . . . . . . . . . . .$29.95
Heavy-duty tie-downs deliver security against slippage with
‘toothed’ locking cam and jaw, yet easily release when
required. Weather-resistant nylon web is 5'-long and1"-wide.
Strap ends have 3/8" vinyl-coated hooks to protect handlebars
and paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.49
19612 Sold in pairs
‘Original’ Clamp-Style
6681003 Red . . . . . . . . . . . . . . . . . . .$22.25
6681011 Black . . . . . . . . . . . . . . . . . .$22.25
Ancra™ Soft Hook Extensions
Tie Downs
Black 1"-wide nylon tie downs with quick
release locking buckle that won’t vibrate loose.
Vinyl-coated hooks protect chrome or paint.
Measure 6-feet long. . . . . . . . . . . . . . . . . . . . . .$19.99
400150 Sold in pairs
Eliminates metal-to-metal contact and provides
the best protection for paint or chrome. Black
1-inch nylon webbing. Sold in pairs. . . . . . . .$5.08
6681065 12"-long (repl. OEM 98192-85T)
6681061 18"-long (repl. OEM 98193-85T)
Tie-Down Bracket and Cable Guide
General
This chrome bracket is perfect for use as a
bungee cord tie-down or as a cable guide.
Sold on a display card of 10. . . . . . . . . . .$1.55 each
17
Canyon Dancer Bar-Harness
StrapAll™ Quik-Tape
Duct tape for the 21st century. Reusable strapping tape that can be twisted, rolled, looped,
nailed, washed, cut-to-length, spliced and is not
only waterproof, but will float. Carry a roll with
you and you’ll never be stuck for a way to
attach everything from bed rolls to grocery
bags. Who needs bungee cords? . . . . . . . . . .$19.99
20894 Measures 1"-wide x 9'-long
17.42
The Bar-Harness™ by Canyon Dancer™ is a
great way to tie down a motorcycle. It slips over
the grips of the handlebars in seconds and
tiedowns attach in the loops that are left hanging. This helps prevent your bike from getting
scratched. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.95
6751127 Black Cuffs/Black
6751126 Blue Cuffs/Black
6751125 Red Cuffs/Black
Super-Strength
Tie-Down Helpers
Heavy-duty, super strong tie-down helpers work
great to protect paint or chrome any time a bike
is being moved.
19611 Sold in pairs . . . . . . . . . . . . . . . . . . . . . .$7.99
Tie-Downs
Apparel
Bike Kits
& Trailers
Ancra Red
Snapper
An extra measure of
security. The Red
Snapper has an industrial quality snap hook
and spring-loaded
keeper to “lock” onto
a ring or eyebolt at
one end, and a vinylcoated S-hook to protect paint and chrome
surfaces at the other.
• Also features
Ancra’s patented
cam buckle on 1"
nylon webbing
• Rated at 1,200 lbs. minimum breaking
strength with a 400 lb. working load capacity
per strap
• Measure 66"-long Packaged with instructions
6681085 Red (pair) . . . . . . . . . . . . . . . . . . . . .$24.95
Seats
& Bags
Foot
Controls
Flag Tie-Down
• 4,500 lb. tensile strength nylon
webbing
• 3/8" vinyl coated hooks
• Made in the USA
6751130 Flag . . . . . . . . . . . . . . .$19.95
Hand
Controls
Lighting
Ancra Classic
Ancra 13’ Strap
Don’t use ropes for
general cargo when
an Ancra tiedown is
faster, easier and
more secure. The 13-foot
general purpose tiedown
features 1" nylon webbing
with vinyl coated S-hooks at
both ends. The strap is held
fast by Ancra’s patented cam
buckle and abrasion reducing
pressure plate.
• Breaking strength is 1,200 lbs. with a
working load capacity of 400 lbs. per
strap straight tension
• Individually packaged
6681081 Red (pair) . . . . . . . . . . . . . . . . . . . . .$15.95
Ancra Lite Tie-Downs
The light-duty strap in a full range of colors.
Ideal for smaller, lighter weight bikes. Combines
durable 3,800 lb. 1" inch nylon webbing with
Ancra’s medium-duty cam buckle. Features vinyl
coated S-hook at one end to protect paint and
chrome, and at the other end a zinc coated steel
S-hook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.25
• Minimum breaking strength of 1,000 lbs,
with a working load capacity of 330 lbs. per
strap
• Measure 66"-long. Packaged with instructions
6681027 Black (pair)
6681024 Blue (pair)
6681021 Red (pair)
• Here are the original top quality tiedowns.
Both feature 1", 4,500 lb. tensile strength
nylon webbing with sewn hand loops to aid
in cinching. Vinyl-coated S-hooks protect
paint and chrome and Ancra’s patented cam
buckle locks webbing securely to avoid slippage
• Minimum breaking strength is 1,200 lbs., with
a working load capacity (WLC) of 400 lbs. per
strap
6681011 Black (pair) . . . . . . . . . . . . . . . . . . . .$22.25
6681003 Red (pair) . . . . . . . . . . . . . . . . . . . . .$22.25
6681043 Green (pair) . . . . . . . . . . . . . . . . . . .$22.25
6681004 Olive Drab (pair) . . . . . . . . . . . . . .$22.25
6681141 Blue (pair) . . . . . . . . . . . . . . . . . . . . .$22.25
Electrical
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
605041
Driveline
Wheels,
Tires
& Brakes
605040
Fitting Kit
Install a tiedown ring anywhere you
want it. Aircraft-quality hardware features a 11/8" diameter ring which may
be rotated 360˚ and, when not in use,
removed completely from its contoured
aluminum base. Installs easily with hardware and instructions provided. . .$14.51
6681054 One per package
Frames
Ancra™ 'Integra'
Tie-Downs
American-made, heavy-duty nylon web straps
for reliable support. Features a built-in soft
hook at the end to prevent disengagement during use. Measures 77" with a useful length of
69" and has a breaking strength of 1,200 lbs.
The 'Integra' Rat Pack features a heavy-duty
patented ratchet buckle with safety lock while
the 'Integra' Classic features the same quality,
durable tie-downs. Includes vinyl-coated hooks.
Available in black.
605040 'Integra' Rat Pack . . . . . . . . . . . . . . . . .$32.99
605041 'Integra' Classic . . . . . . . . . . . . . . . . . . .$24.99
17.43
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Tie-Downs
17904
17903
C.C. Rider® ‘Big Daddy’ Tie-Downs
Designed for durability and security on those long hauls. Features
a 2"-wide nylon webbing, snap-hook secure end, vinyl coated 3/8" S-hook
at bar-end, double security stitching, 2600 lb. rated assembly and 7400 lb.
test nylon. Sold in pairs.
17903 Measures 2"-wide x 61/2'-long with ratchet . . . . . . . . . . . . . . . . . .$37.99
17904 Measures 2"-wide x 61/2'-long with cam buckle . . . . . . . . . . . . . .$25.94
17908
17909
17916
C.C. Rider® Tie-Downs with Built-in Soft-Ties
Features 4500 lb. test nylon webbing. All styles include a built-in soft-tie.
Sold in pairs.
17908 Measures 1"-wide x 51/2'-long with cam buckle . . . . . . . . . . . . . . .$21.49
17909 Measures 1"-wide x 51/2'-long with secure hook
and cam buckle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99
17916 Measures 1"-wide x 7'-long with ratchet . . . . . . . . . . . . . . . . . . . . .$29.99
C.C. Rider® Sheepskin Soft-Ties
This original design uses a standard 18" soft-tie with a 9"-long sleeve of
genuine sheepskin that reduces scratches on paint and chrome surfaces.
Features 4500 lb. test nylon webbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99
17905 Sold in pairs
17914
17915
17906
C.C. Rider® Soft-Ties
These soft-ties are created to allow your tie-downs to go the extra mile.
Features 4500 lb. test nylon webbing to ensure strength.
Sold in pairs.
17910 Measures 1"-wide x 18"-long . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99
17911 Measures 1"-wide x 12"-long . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99
C.C. Rider® Tie-Downs
These tie-downs are intended for heavier loads and the 4500 lb. test 1"wide nylon webbing enhances security on long hauls.
General
17
17907
Ratcheting Tie-Downs
17913 Measures 1"-wide x 7'-long (sold in pairs) . . . . . . . . . . . . . . . . . . . . .$27.49
17914 Measures 1"-wide x 7'-long (sold each) . . . . . . . . . . . . . . . . . . . . . . .$13.89
17915 Measures 1"-wide x 12'-long (sold each) . . . . . . . . . . . . . . . . . . . . . .$18.49
Cam Buckle Tie-Downs
17906 Measures 1"-wide x 51/2'-long (sold in pairs) . . . . . . . . . . . . . . . . . .$18.49
17907 Measures 1"-wide x 12'-long (sold each) . . . . . . . . . . . . . . . . . . . . . .$12.29
C.C. Rider® Wheel Strap
Secure your wheels to rail trailers and wheel chock with this wheel strap.
Features 4500 lb. test nylon webbing and a spring buckle. Sold each.
17912 Measures 1"-wide x 2'-long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99
17.44
Bungee Cords & Tie-Downs
Apparel
Bike Kits
& Trailers
Seats
& Bags
04100
Foot
Controls
Hand
Controls
Bungee Cargo Nets
Made from multi-strand natural rubber and wrapped with a
knitted polyethelyne black cover. Hooks are poly-coated to
prevent scratching. Sold each.
04100 12" x 17" with 6 hooks
(repl. OEM 98169-88T) . . . . . . . . . . . . . . . . . . . . . . . . .$10.99
400219 14" x 14" with 6 hooks
(repl. OEM 98170-88T) . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
Motor Factory® Tie-Downs
Available exclusively from Custom Chrome, these
Motor Factory® tie downs feature:
• Exclusive built-in soft strap extension and coated
top and bottom hooks will protect handlebars,
triple trees or other chrome parts.
• Heavy-duty all metal cam buckle and black 4,000
lb. rated nylon webbing combine to produce a super strong tie-down with easy
thumb pressure release.
• Unique “strap wrap” feature displays the Motor Factory® logo and secures the loose
end of the tie-down when trailering. American made.
Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.99
400180
Lighting
Electrical
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
Bungee Nuts
Can work as a tie-down knob or an excellent
spring anchor, and can be used to replace shock
absorber nuts. Sold in pairs. . . . . . . . . . . . . . . .$7.49
20207 5/16"-18
20208 3/8"-24
20209 3/8"-16
Driveline
Bungee Cords
Plain black bungee cords to handle your tie-down needs. Packs of 10.
15132 22"-long with four hooks (repl. OEM 98199-85T) . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.14
15133 24"-long with two hooks (repl. OEM 98197-85T) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.49
15134 18"-long with two hooks (repl. OEM 98196-85T) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.52
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
17.45
Cross
Reference
Bungee Cords & Cable Ties
Wheel Tiedown Straps
Especially designed to secure motorcycle wheels to
channel or railed cycle trailers. Made from 1"
polypropylene webbing with
a spring–loaded, nickel-plated buckle.
• Rated at a breaking strength of 300 lbs. with a 100
lb. working load capacity per strap
6681057 Black/Yellow (pair) . . . . . . . . . . . . . . . . . . .$11.53
3 Assorted Sizes
Assorted 30-Pack Cable Ties
• Perfect for garage, shop, toolbox or fanny
pack use
• Assorted 30-pack guarantees the right size
10 of 4", 10 of 6", 10 of 8"
• Available in a variety of colors
4150044 Black . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99
4153115 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99
4153116 Orange . . . . . . . . . . . . . . . . . . . . . . . .$5.99
4153117 Yellow . . . . . . . . . . . . . . . . . . . . . . . . .$5.99
4153118 Green . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99
4153119 Blue . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99
4153120 Purple . . . . . . . . . . . . . . . . . . . . . . . . .$5.99
4153121 Grey . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99
4153122 White . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99
Emgo Bungee Cords with Hooks
Heavy-duty 10 mm (3⁄8") black elastic cords of multi-stranded natural rubber with plastic covered
hooks. Sold each.
8642277 12" with 2 hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$0.71
8642281 18" with 2 hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $0.75
8642285 24" with 2 hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$0.85
8642289 24" with 4 hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.59
5 Sizes to choose from
Uni Filter Bulk Cable Ties
General
100 black ties per package.
5571537 4"-long . . . . . . . . . . . . . . . . . . . . . . . .$3.96
5571540 51/2"-long . . . . . . . . . . . . . . . . . . . . . .$5.96
5571543 71/2"-long . . . . . . . . . . . . . . . . . . . . . .$8.96
5571547 11"-long . . . . . . . . . . . . . . . . . . . . . .$17.25
5571550 15"-long . . . . . . . . . . . . . . . . . . . . . .$22.25
Helix Mini Bungee Cords
• 5/32" x 10"-long
• 4-pack of assorted colors
• Excellent addition to the tool or glove box
4150200 4 pack . . . . . . . . . . . . . . . . . . . . . . . . .$4.99
17
17.46
Tool Kits & Boxes
Apparel
Bike Kits
& Trailers
Seats
& Bags
Teardrop
Tool Boxes
Tire Repair Kits by Progressive Suspension
These repair kits are the perfect way to avoid a long wait for
the tow truck. Made for tube and tubeless type tires. Each kit
includes CO2 cartridges, plugs, patches, Moto Pump-Ultra that
will can use threaded or unthreaded CO2 cartridges, adapter
hose, adhesive and a plug tool.
28018 With leather pouch (MFG #TRK-4) shown . . . . . . .$54.95
28020 With nylon pouch (MFG #TRK-2) . . . . . . . . . . . . . . .$49.95
Motion Pro Pocket Tool Kit
Designed for roadside adjustments or minor service, the
kit contains Phillips, Allen®, and Torx® bits, 7/16",1/2", 9/16"
sockets, 1/2" and 3/8" drive adaptors, bottle opener and an
ergonomic tool body, all in a compact ballistic nylon belt
pouch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.44
33978 Sold each
Custom Chrome®
‘Professional’ Tool Box
This 46-piece kit meets every need. The big
improvements in this latest version are the
addition of a ball-point sockethead wrench
set instead of regular hex keys, and deep
sockets instead of standard. An electric
proofer, dial-type tire gauge and an aluminum flashlight are also included.
85167 ‘Professional’ toolbox
Contents:
• 2 Phillips screw drivers
• 2 Slotted screw drivers
• 1 Bristle
• 1 Adjustable plier
• 1 Cutting plier
• 1 12V Electric proofer
• 1 3/8" drive ratchet handle
• 1 3/8" drive - 1/4" drive adapter
• 11 Deep sockets 1/4" - 3/4"
• 1 Extension bar 3/8"
• 1 3/8" Universal joint
• 2 3/8" Spark plug sockets
• 8 Combination wrenches 3/8" - 15/16"
• 1 Roll electric tape
• 1 Utility knife
• 1 Tire gauge
• 1 Aluminum flashlight
• 7 Pc. ball-point sockethead set 1/8"- 3/8"
Our popular chrome reproductions
of the Original Equipment
‘teardrop’ tool box used from 1940
thru 1959 are available in two different versions, with your choice
of the old-style lock or a more
modern, conventional tumbler
lock for improved security.
26457 Tool box with conventional
tumbler lock . . . . . . .$50.59
26469 Tool box with old-style
lock (repl.
OEM 64205-40) . . . .$59.89
26474 Replacement key for oldstyle lock
(sold in pairs) . . . . . . .$5.19
Foot
Controls
Hand
Controls
Lighting
Electrical
Colony Tool Box Mounting Kit
36183 A complete hardware kit
for mounting the tool box
on models from 1936 thru Exhaust
1961 . . . . . . . . . . . . . . .$14.99
Intake
Engine
Gaskets
Nylon Tool Pouch
Removable toolbox insert fits
stock and reproduction teardrop
toolboxes on Big Twins from 1940
thru 1959. Made of 1000 denier
nylon with water-resistant urethane coating and double-stitched
with nylon thread. Tools not
included. . . . . . . . . . . . . . . . . . .$20.99
29088 Nylon tool pouch
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Teardrop Toolboxes
for Softail® Models
Folding Sockethead Wrenches
American-made stainless steel folding tools available both
with inch sizes and metric.
84189 Folding Combi-tool, inch, open-end wrenches 7/16",
1/2", 9/16", 5/8", 13/16", screwdriver 1/4" flat and
Phillips #1, sockethead wrenches 5/32", 3/16", 7/32",
1/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.39
84190 Folding sockethead-tool, metric, 1.5, 2.0, 2.5, 3.0,
4.0, 5.0, 5.5, 6.0mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.69
84191 Folding sockethead-tool, inch, 1/16", 5/64", 3/32",
1/8", 5/32", 3/16", 7/32", 1/4" . . . . . . . . . . . . . . . . . . .$9.69
Forks
& Shocks
Chrome-plated replicas of the toolbox used
from 1940 thru 1959. The mounting brackets are
held by the fender support bolts and passenger
footrest. Left-side kit is ideal for Fat Boy® and
FLSTN models because of the shotgun exhaust.
Fits Softail® models from 1984 thru 1999 (except
1990-up Heritage Softail® Classic models).
09765 Right-side kit
(repl. OEM 64201-85B) . . . . . . . . . . . .$84.99
09767 Left-side kit . . . . . . . . . . . . . . . . . . . . . .$97.99
26469 Replacement right toolbox ONLY .$59.89
09764 Replacement left toolbox ONLY . . .$65.99
Sheetmetal
General
17.47
Cross
Reference
CruzTOOLS Tool Kits
20981
EconoKit Electrical Kit
by CruzTools®
Great American Tool Kit™
by CruzTOOLS®
These are the best travel tools you can get anywhere, using selected items from legendary U.S.
tool makers for total reliability. Lifetime guarantee on on tools from manufacturer. A large
assortment of tools designed for Harley-Davidson®
motorcycles. Kit includes 2 spark plugs sockets,
wrenches, hex keys, torx keys, a 6-in-1 screwdriver, and more for roadside repairs. Sturdy vinyl
coated pouch with straps. Will fit it in most
large fork bags. . . . . . . . . . . . . . . . . . . . . . . . .$169.99
20984 Measures 10"-long x 4"-deep
20982
For electrical problems you may encounter on
the road, you’ll wish you had the EconoKit
Electrical kit. It contains just about everything
you need to troubleshoot and repair electrical
failures, made even more useful with a diagnostic guide included. . . . . . . . . . . . . . . . . . . . . . .$44.99
20986 Measures
Compact American™ Tool Kit
by CruzTOOLS®
20983
Econo Kits by CruzTOOLS
®
Econo kits cut cost but not content for the rider
who demands the best on the road. Lifetime
guarantee on tools from manufacturer.
General
CruzTOOLS® Outback’r™ 13-in-1
Multi-Tool
Inspired by outdoorsman-style multi-tools, yet
designed specifically for Harley-Davidson®
motorcycles, the Outback'r™ H13 is a powerhouse of functionality. . . . . . . . . . . . . . . . . . . .$19.95
• At only 9 ounces and 3.5 inches, you won't
have any trouble finding a spot to carry it
• Built to last using heat-treated chrome vanadium and carbon steel
• Includes three hex keys (5/32", 3/16", and
1/4"); two Torx® keys (T25 and T27); slotted
and Phillips screwdrivers; a socket driver with
3/8", 7/16", and 1/2" sockets; 10mm box and
9/16" open-end wrenches plus a spoke
wrench
645530 Sold each
17
17.48
Contains wrenches, hex keys, torx keys, a 6-in-1
screwdriver, eight-inch adjustable wrench and
spark plug socket. Makes roadside repairs convenient. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$124.99
20985 Measures 9"-long x 51/2"-wide x
11/2"-deep
Roll-Up Tool Kit
Includes the most common wrench sizes, an
adjustable wrench, locking pliers, two spark
plug socket sizes,Torx® and sockethead wrenches, tire gauge and lots more. Measures 91/2"long with a rolled diameter of 3" and weighs
three pounds.
20981 Roll-up tool kit . . . . . . . . . . . . . . . . . .$64.99
Zip-Up Tool Kit
Features five combination wrenches, spark plug
multi-tool, 6-in-1 reversible screwdriver, essential Torx® and sockethead wrenches. All in a
compact package weighing less than two
pounds and measuring 9"-long, 4"-wide by
11/2"-deep.
20982 Zip-up tool kit . . . . . . . . . . . . . . . . . . .$39.99
Hex/Torx Combo Tool
Features the standard sizes required on all late
model bikes in a convenient pocket size carry
tool.
20983 Hex/Torx combo tool . . . . . . . . . . . . .$15.39
American Teardrop Cordura™
Tool Kit by CruzTOOLS®
The zip up Cordura Plus® pouch is designed to fit
into the accessory teardrop toolboxes fitted to
bikes since 1940, or to store in saddlebags. The
pouch and its contents are all American-made,
and contains; 6-in-1 screwdriver, adjustable
wrench, locking pliers, spark plug sockets and
gapper, 4 chrome plated open-end wrenches
sizes 10mm, 3/4", 5/8", 9/16", 1/2", 7/16" and
3/8", an assortment of Torx® and sockethead
wrenches, electrical tape, Loctite®, WD-40, baling wire and zip-ties.
20980 Teardrop Cordura™ tool kit . . . . . .$189.99
Tool Kits
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Essenti-Tool™
Hand
Controls
Ultima-Tool™
Wind Zone Essential Tool Kits
DayTripper™ Combo Tool Kit by Wind Zone
• This patent pending combo tool kit is made of all stainless steel construction and guaranteed forever by the manufacturer!
• Lightweight and compact
• Big enough to fix the majority of roadside repairs, and small enough to
wear on your belt
• Combo tool kit comes with tie wraps, wire, Ultima-Tool™ and EssentiTool™ and is contained within a durable black canvas tool pouch making
it very convenient for road trips
• Ultima-Tool™ features full size adjustable wrench, full size needle nose
pliers, large knife blade, wood saw, flat screwdriver, file, wire
cutter/stripper, bit driver with slotted screwdriver bits, Phillips screwdriver bits, Torx™ bits and allen bits
• Essenti-Tool™ features needle nose pliers, small knife blade, flat screwdriver, file, wire cutter/stripper, hole punch, wrench and scissors
640101 DayTripper™ combo tool kit with pouch . . . . . . . . . . . . . . . . . . . . .$35.00
Contains just about everything you could
ever want or need in a take-along tool kit.
Designed to fit neatly into most fork bags,
this is the perfect kit for a wide range of
motorcycles. The custom designed tools are
drop forged, polished, plated and guaranteed forever! The black nylon pouch with
clear vinyl moisture sheath is built to last. It is
available by itself or with a teardrop pouch
that contains a 6-in-1 ratchet screwdriver. Perfect for short distance rides.
• 10mm combination wrench
Tool Kit is equipped with:
• Small and large slotted
• Locking pliers
screwdriver
• Tire pressure gauge
• Phillips #1 and #2 screwdrivers
• Metal flashlight
• Spark plug gap gauge
• AA flashlight battery
• Electrical wire
• 3/8" ratchet driver
• Electrical tape
• 5/8" & 13/16" spark plug socket
• Spare turn/taillight bulb
• 3/8" & 7/16" open-ended wrench
• Mechanic's wire
• Siphon hose
• 5 nylon cable ties
• 9 Hex keys/allen wrenches
• Shop towel
• 7-piece torx set
• WindZone Essenti-Tool™
400701 Wind Zone tool kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$78.84
640100 Same as CC #400701 with the addition of a 6-in-1 ratchet screwdriver
with tear-drop pouch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.95
Lighting
Electrical
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
8-Piece Sockethead
Wrench Set
Chrome vanadium quality 8-piece
sockethead wrenches. Sizes from
1/16" to 1/4".
84185 8-piece sockethead
wrench set . . . . . . . . . . .$5.79
Frames
Forks
& Shocks
Sheetmetal
General
17.49
Cross
Reference
Hand Tools & Parts Trays
Motion Pro® T–Handle Ratchet
• Perfect for the toolbox, truck and fanny pack
• Compact design allows for easy use in tight
confines
5008231 1/4" T-handle ratchet . . . . . . . . . .$30.40
5008226 3/8" T-handle ratchet . . . . . . . . . .$30.40
Motion Pro T–Handle
Phillips Screwdrivers
®
Feature chrome vanadium shafts with Phillips
bits, and carbon steel “T” style handles.
5008101 #1 Phillips . . . . . . . . . . . . . . . . . . . . . .$5.30
5008102 #2 Phillips . . . . . . . . . . . . . . . . . . . . . .$6.50
5008103 #3 Phillips . . . . . . . . . . . . . . . . . . . . . .$7.40
5008146 Set of 3 . . . . . . . . . . . . . . . . . . . . . . .$19.10
Motion Pro®
Snap Ring Pliers
• The right tool for the right job
• Economical pliers that easily do both inside
and outside opening snap rings or clips
• Includes three extra sets of tips, one additional straight tip, and two offset or angled tips
5008186 Complete kit . . . . . . . . . . . . . . . . . .$15.40
Emgo Safety Wire Pliers
Available in two sizes, 7 and 9 inch, with return
spring mechanism for easy wire twisting.
8643461 7" . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35.50
8643460 9" . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36.50
Motion Pro®
T–Handle Drivers
Easy-to-use T–handle tools allow optional ways
to use any 1/4" or 3/8" drive attachments such as
sockets, hex drives, crow’s foot or swivels.
Motion Pro lifetime replacement warranty.
5008158 1/4" drive (81/2" long) . . . . . . . . . .$9.20
5008159 3/8" drive (101/2" long) . . . . . . . .$10.70
Motion Pro®
Trucothane
Hammers
General
Feature shot-filled steel canisters
in heads with convex faces for
maximum dead blow, non-bounce
action and non-slip handle. They
outlast rawhide, rubber, brass or
nylon by 10-20 times.
5008079 Standard 26 oz. . .$44.90
5008082 Slimline 18 oz. . . .$35.20
Motion Pro® Hose Shears
Scissor action cutter for fast cutting of thin wall
and small diameter vinyl or nitrite type tubing.
Features teflon coated tool steel blades. Blades
may be resharpened or replaced.
5012013 Sold each . . . . . . . . . . . . . . . . . . . . .$28.50
Motion Pro® Magnetic Parts Tray
• All-purpose magnetic dish is ideal for keeping
track of loose fasteners and other small parts
• Attaches magnetically to any steel surface
• Measures 5" in diameter and is 1" deep
5008156 Sold each . . . . . . . . . . . . . . . . . . . . .$11.30
Magnetic Parts Tray
• Stainless steel with a very powerful magnet
on bottom
• Will hold on vertical or upside down ferrous
surfaces while keeping contents from spilling
• Magnet has non-scratch coating for safe use
on painted surfaces
• A must have item for every professional or
do-it-yourself mechanic
4150000 Sold each . . . . . . . . . . . . . . . . . . . . .$13.55
17
17.50
Ramps & Wheel Chocks
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Pingel® Motorcycle Wheel Chock
Folding Motorcycle Ramp
12"-wide American-made loading ramp has a unique hinge
guaranteed to support 1,000 lbs. Innovative design and aluminum construction make it extremely strong and durable. It
extends to an overall length of 7' 8" and collapses to only
46"-long x 41/4"-thick, weighing only 25 lbs. . . . . . . . . . . .$185.69
20205 Folding ramp
This American-made wheel chock secures a
motorcycle in your van, truck or trailer, and is
quick and easy to remove. Chrome plated wheel
chock features heavy-duty thick wall steel construction, and near flush stainless steel floor
mounting hardware. Includes mounting hardware. The appearance of the Wheel Chock
including the cross brace is a trademark of
Pingel Enterprise, Inc. The brackets used with
the Wheel Chock are patented. . . . . . . . . . .$62.99
640102 Fits 16" 17" 18" 19" and 21" wheels and
tires from 31/4" to 61/2"-wide
Hand
Controls
CMP ‘Pro-Series’
Wheel Chocks
• Ideal for holding the front
wheel(s) of your 2, 3 or 4
wheeler
Lighting
• Holes provided for bolting
directly to pick-up bed or trailer
floor (mounting hardware not
included)
• Use the quick mount kit below
Electrical
for easy install and removal
9061163 31/2" inside width
(each) . . . . . . . . . . . .$16.00
(each) . . . . . . . . . . . .$16.95 Exhaust
(each) . . . . . . . . . . . .$20.70
Intake
Engine
400211
Gaskets
Tranny
& Clutch
400210
Motor Factory® Extra Wide
Motorcycle Ramp
Perfect around the shop or home, this extra wide ramp
enables you to ride your bike up and roll it back down, by
yourself, while remaining seated. A heavy-duty load capacity
of 1500 lbs. ensures that any bike is light enough for this
ramp, even the dressiest of dressers. Constructed of light
weight aluminum and designed to fold into three pieces
for easy vertical storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$379.99
400211 Measures 36"-wide x 94"-long
Motor Factory® Single Wide Loading Ramp
Lightweight and strong, this reinforced aluminum loading
ramp is arched to prevent dragging. . . . . . . . . . . . . . . . . . .$119.99
400210 Measures 12"-wide x 90"-long
Driveline
Motorcycle Wheel Chock
Provides a secure front wheel stop for transporting a motorcycle in your truck or trailer. Includes
quick-release hardware. Measures 71/4"-high x
121/4"-long.
• Quick installation or removal
• Heavy-duty thick-wall steel
• Steel, flush-mount floor attachments
• Durable chrome or black finish
19610 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . .$54.49
19609 Matt black . . . . . . . . . . . . . . . . . . . . . . .$51.29
88268 Replacement hardware kit . . . . . . . .$9.99
Motorcycle Ramp Kit
Now there’s a better way to load and unload your
bike. This kit makes it possible for you to assemble your own sturdy ramps to fit against tailgates
and such. You simply bolt the aluminum end
piece to your own 2" x 12" board (not included)
with the hardware supplied. . . . . . . . . . . . . . . .$30.99
20249 Ramparts® ramp kit (maximum load capacity is 700 lbs.)
Wheels,
Tires
& Brakes
CMP ‘Pro-Series’ Wheel
Chock Quick Mount Kits
• Low profile hold-down plate
bolts to truck bed or trailer
floor
• Provides easy chock installation
and removal
• Mounting hardware and
instructions included
9061161 For 51/4" chock
(each) . . . . . . . . . . . .$15.50
9061164 For 31/2" chock
(each) . . . . . . . . . . . .$13.60
9061836 For 111/2" chock
(each) . . . . . . . . . . . .$19.50
17.51
Frames
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Motorcycle Ramps & Lifts
Telescopic
Motorcycle Ramp
Heavy-duty composite material is
lighter than steel and delivers 750
pounds of capacity. It telescopes
from 66" to 96" so it’s easy to
transport and efficient to use.
Features include an arched design
for easier loading, custom ends
and a non-slip surface. . . . .$149.99
20317 Motorcycle ramp
K&L Supply MC15 Cycle Dock
Permits one person to load and unload a motorcycle in a trailer, pickup
truck or service lift. Pivot mechanism uses the weight of the bike to hold
itself upright, leaving your hands free to secure the bike. Simple in design
and ruggedly built to last for a long time. Use supplied mounting rails to
mount Dock into trailer or pickup. Rails mount to deck so you can slide the
Dock out leaving just the mounting rails behind, freeing up your truck or
trailer for other uses. Kit comes complete with two rockers (wide & narrow), Cradle stop (upright), mounting plate, support arm (with eyelets and
adjustable feet) and two mounting rails. . . . . . . . . . . . . . . . . . . . . . . . . . . .$228.09
641641 Complete kit
Note: The use of tie-downs is strongly recommended.
General
K&L Multi-Lift Motorcycle Lift
17
Features locking neoprene casters, powder-coated finish, 16" of padded
contact area, 4-ton bottle jack, tie-down anchors, heavy-duty 1200 lb.
capacity, foot operated valve and locks. Fully adjustable from 41/2" to
a maximum height of 17". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$292.89
21004 Sold each
K&L Supply Adjustable Shop Dolly
Convenient mobility when working on your bike. Designed to work
specifically with the CC #21-004 Motorcycle Lift. Once your bike has
been lifted clear of the ground, just roll the dolly into place under the
bike and lower the lift until you can remove it. Features 15" maximum
height, swivel neoprene wheels with adjustable base (13" to 20") and
1000 lb. capacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$185.79
21000 Sold each
17.52
K&L Adapters and Ramp Tool
for Multi-Lift
For use with CC #21-004. Features thick
rubber pads to protect frame and zincplating to last long. Work on K&L multi lift
only. Low riding ramp tool features diamond
plate surface and rubber feet. Sold each.
30110 Fits all Dyna Glide
Twin Cam 88® models . . . . . .$50.69
30111 Fits all Sportster® models . . .$39.79
30112 Low riding ramp tool for use with
multi-lifts when trying to lift a
lowered bike . . . . . . . . . . . . . .$50.69
30112
30111
30110
Motorcycle Lifts
Apparel
K&L Supply MC650 Hydraulic Lift
Our flagship lift, the MC650 offers the versatility and features you expect from K&L. Features like, front and rear
drop sections for easy wheel removal, a 47 inch locked
lift height and ultra heavy-duty construction. Together
with the powerful hydraulic pump, the MC650 can lift up
to 1500 lbs. By adding the available options, such as the
Deluxe Wheel Clamp, tool trays, or side panels, and
retractable wheels, you will add a new level of efficiency
to your service center. For added value and convenience,
use the pump unit to run another lift by ordering the
dual lift adapter valve, and a second lift with no pump.
Call your MSI sales representative for more details, and
get the best lift in the industry.
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Standard Features include:
• 29.5” wide x 86.5” long deck surface
• Detachable loading ramp
• Automatic five position locking
system
• Front and rear drop panels for easy
wheel access
• 110v Hydraulic pump
• One year warranty
612201 MC650 Hydraulic Lift (Includes pump and
pump stand) . . .$2,099.00
Hand
Controls
Lighting
612201
Electrical
Note: Wheel Vise not included with lift.
Optional Accessories
612202 MC10 Deluxe
Wheel Clamp . . . .$199.99
612203 MC600/650 Wheel
Vise, LH . . . . . . . . . .$228.59
612207 Lift Extension . . . .$128.49
612204 Tool Holders . . . . . .$65.39
612205 Complete Side
Panel Set (4 panels
and 2 ramps) . . . . .$169.79
612206 Retractable
Wheels . . . . . . . . . . .$65.39
Note: Must
be drop shipped LTL
Exhaust
Intake
Engine
612202
Gaskets
612205
Tranny
& Clutch
612203
612204
612206
Driveline
Wheels,
Tires
& Brakes
Frames
K&L Supply Lift Extension
Introducing the newest lift accessory for motorcycles with a
wheelbase of longer than 6 feet (72” inches). This sliding
extension kit gives the service technician another 30” of bike
length space. Unit easily bolts to MC600 and MC650 lifts. The
mounting rails can be purchased as an option. Mounting rails
from your Deluxe Wheel Clamp can be used. The mounting
plate does come predrilled, so this extension kit can be
mounted to other bike lifts.
Forks
& Shocks
Sheetmetal
612207 Lift Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . .$128.49
General
17.53
Cross
Reference
Motorcycle Lifts
B2 Lifts
Here we offer a new generation of motorcycle lifts. All hydraulic lifts come complete with jack bottle. A professional quality lift with steel rolling ball feet
makes repairs, maintenance, wheel removal, oil changes and cleaning easy.
686597
B2 Megalift
B2’s Megalift is a multifunctional hydraulic lift for H-D® models, custom bikes and
cruisers. Comfortable foot-operated hydraulic pump with heavy-duty relief valve
and handle. Minimum height 9 cm, maximum height 40 cm, top 36 x 60 cm.
686346 Megalift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$261.59
686597 Frame adapter set (required for Sportster® and
Twin Cam 88® Dyna Glides) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$85.90
686346
686347
686345
686344
686348
B2 Minilift
This mini lift should be a part of every work shop. Small measurements and
400 Kg of max load is a big plus of this item. Min. height 9 cm, max. height
40 cm, top 15 x 45 cm. Frame adapters shown on the picture are sold separately.
686344 Minilift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$212.49
686347 Frame adapter (sold in pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42.29
686349
Note: Must
be drop
shipped LTL
B2 Superlift
This is the top-of-the-line B2 hydraulic scissor lift for Big Twins.
Extremely compact when folded. Measures: min. height 8,5 cm max.
height 50 cm max. load 500 Kg with 46 x 76 cm top.
686345 Superlift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$508.59
686349 Frame adapter set (required for Sportster®
and Twin Cam 88® Dyna Glide models) . . . . . . . . . . . . . . . . . . . . . .$98.39
686348 Wheel kit for Superlift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$98.39
General
Motorcycle Lift
A professional quality lift with 1"-diameter steel rolling
ball feet makes repairs, maintenance, wheel removal, oil
changes and cleaning easy. Adjustable feet at each corner
allow the lift to remain steady while in use. The included
bottle jack has a handy foot pedal making raising and lowering a breeze. A must for any shop. . . . . . . . . . . . . .$272.99
400770
17
17.54
Motorcycle Lifts
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
K&L Supply MC30 Universal Swingarm Stand
K&L Supply MC450 Center Jack Stand
Zinc-coated stand works flawlessly on Buell®, Sportster® and Dyna Glide models.
Features include 11/2"-diameter steel tube frame long-lasting durability, and frame
supports with thick rubber pads to prevent scratches. Check exhaust clearance on
motorcycle before using. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$134.79
699975 Sold each
Easy, scissor-type action lifts most motorcycles up to 1000 lbs.
For use on ground or lift tables.
30115 Scissor lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$228.59
631452 Optional non-slip rubber pad . . . . . . . . . . . . . . . . . .$9.99
Lighting
Electrical
Exhaust
Intake
Engine
K&L Supply MC455 Fat Jack
All of the features that make the MC450 Center Jack great
and more. Fat Jack’s wider deck surface with rubber non-skid
pad increases your lifting area. The deck measures 16"-long x
10"-wide. Lifting dimensions are: 31/2"-minimum x 13"-maximum with a 1,000 lb. capacity. . . . . . . . . . . . . . . . . . . . . . . . .$255.00
631451 Sold each
612214
Gaskets
Tranny
& Clutch
K&L Supply MC20 Front End Stand for Buell® Models
Designed for use on most Buell® models to permit many front end repairs, and features
3 adjustable positions. Zinc-coated 11/2" tubing for durability. Requires the additional
purchase of one of the pins listed below.
612209 Lift ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$144.99
612218 Lift pin ONLY for most Buell® models from 1994 thru 2002
(except those listed below) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.79
612214 Lift pin ONLY for Blast® models from 2000 to present . . . . . . . . . . . . . . . . . . . . . . .$9.79
612219 Lift pin ONLY for RS1200 models from 1989 thru 1992 . . . . . . . . . . . . . . . . . . . . . .$8.39
612223 Lift pin ONLY for Firebolt® and Lightning® models from 2002 to present . . . . .$8.39
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Motorcycle Stands
Equipped with rubber grip on lift handle.
K&L Supply Swingarm Stand for V-Rod Models
®
This zinc-plated 1.5" tubular steel frame swingarm stand is made
exclusively for the V-Rod® motorcycle. The swingarm adapters are
shaped for it’s unique configuration. Thick rubber pads cover the adapters to prevent scratches, and provide a non-slip surface. . . .$159.95
631450 Sold each
For Touring and Softail® Models
Will also work with bikes that have been lowered and can
also be adjusted to work with Sportster® models.
27093 8"-tall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.99
For FXR, Dyna Glide and Sportster® Models
(except Hugger® Models)
27095 83/4"-tall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.99
Note: Not recommended for use on Softail® and Touring models or lowered
bikes
17.55
Sheetmetal
General
Cross
Reference
Motorcycle Lifts
Easiest Stand
Up Display
and Lift in
the Industry
General
Kendon Stand-Up Bike Display and Lift
Working on your bike doesn’t need to be stoop labor. With the Kendon Stand-Up Bike Lift you won’t spend a
month’s wages to get your bike up to a comfortable working height. The Stand-Up Bike Lift is designed for ease of
use and economical storage. It is a true one-person lift; the built-in wheel chock holds the bike upright while it is
being secured to the lift. The single point controls allow the bike to be raised up with one hand. When not in use
the lift rolls on castors and stores in a vertical position and requires less than three square feet of floor space. It features a hydraulic lift mechanism; you don’t need a compressed air supply or electricity to use it. The lift is fabricated
from high quality round steel tubing, and features all-welded construction with a black powder coated finish.The
Kendon Stand-Up Lift will raise your bike up to a 32-inch working height, and has a 1,000 lb capacity. The lift is covered by a one-year limited warranty.
• Table locking system allows four height levels
• Stands up, folds up for ease of use and storage
• Built-in tie down points
• Will accommodate long wheelbase choppers
• Adjustable stabilizer legs
• Wheel chock will fit wide front tires
• All welded truss type frame
• Front mounted hydraulic controls
650627 Stand-Up Bike Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$899.00
650646 Auxiliary frame jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.00
650645 Oil drain pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.00
650643 18" stainless steel work tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.00
650644 36" stainless steel work tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.00
650646
650645
650644
650643
17
17.56
Stands, Jumper Cables & Creeper Seats
Apparel
Bike Kits
& Trailers
Seats
& Bags
‘Rollastand’ Wheel Cleaner Stand
Just roll the front or rear wheel onto the stand to allow
easy cleaning.
• Designed for bikes without center-stands
• No danger of bike tipping over
• Billet aluminum, powder coated black
• Features sealed bearings and non-slip bottom . . . . . .$64.99
20158 For all Harley-Davidson® models
Foot
Controls
Yuasa
Jumper Cables
20183
• Heavy duty, 8 foot,
Hand
8-gauge cables will not stiffen
Controls
or freeze
• Tangle resistant, encased rubber
grips for safer use
2831656 Jumper cables . . . .$12.79
Lighting
Electrical
Exhaust
Intake
20177
Custom Chrome® Creeper Seats
Take a load off your feet with these comfortable
creeper seats. Features include a
cushioned vinyl seat, tubular steel frame, tool
tray and rotating wheels all in our
favorite color – black! A cool, pullout drawer
helps you keep organized when working on
your bike.
20177 Basic creeper seat . . . . . . . . . . . . . . . .$58.99
20183 Creeper seat with drawer . . . . . . . . .$69.99
Motorcycle
Jumper Cables
Engine
64 inches long, 10-gauge battery
jumper cable set. Insulated color
coded terminal clamps for safe and
secure handling. . . . . . . . . . . . . . .$9.16
Gaskets
8642081 Jumper cable set
Custom Chrome® Hydraulic Creeper Stool
Tranny
& Clutch
The ultimate seat for your workshop. Features four casters for
easy mobility and hydraulic height adjuster. Bottom serves as
a tool and parts tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.99
20182 Hydraulic creeper stool
Driveline
Stator Tester with Adaptor Plugs
Exclusive to Custom Chrome®, this high-quality
American-made tester is a must for any active
mechanic. Simply attach the appropriate adaptor
plug, connect the power leads to any 12-volt battery
(whether in or out of the bike) and in seconds you
know the exact output and condition of your stator.
Each tester is equipped with an accurate ammeter, a
built-in fuse to guard against accidentally reversing
the polarity, 42"-long leads and five different adaptor
plugs. Each unit comes in a specially-constructed,
heavy-duty box.
56231 Tests the stators fitted to Big Twin models
from 1970 to present and Sportster® models
from late 1984 thru 2003 . . . . . . . . . . . . .$246.99
12567 Replacement fuse . . . . . . . . . . . . . . . . . . . . . .$1.09
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
17.57
Cross
Reference
Diagnostic & Maintenance Tools
General
BDM Diagnostic Monitors
Permit the independent technician to receive
the same detailed data stream, troubleshooting
codes, and perform tests that were previously
only available to the H-D® dealer. Provides live
powertrain data in a variety of graphs and
snapshot recordings. Displays current and historical trouble codes with full descriptions using
OE terminology. The user can clear codes after
they have been fixed. OE active diagnostics permit bi-directional control of components.
Both kits include a bi-directional scantool, carrying case, 8-foot main diagnostic cable, adaptor
cable, software cartridge, users guide, 12-volt
power connection, and 4 AA batteries.
The BDM Pro can print a list of trouble codes
through your PC by using the PC Link connector,
and includes a 2-channel oscilloscope and digital
multi-meter with volt probes and probe alligator clips, making it a 3-in-1 tool.
Both kits include the software cartridge for
Magneti Marelli fuel injected models from 1995
thru 2001, and all carbureted Twin Cam 88®
models from 1999 thru 2003.
An additional software cartridge for bikes
equipped with the Delphi fuel-injection system
from 2001 to present is available separately.
20974 BDM monitor . . . . . . . . . . . . . . . . .$2,999.00
20975 BDM Pro monitor (shown) . . . . .$4,089.00
22993 Software cartridge for Delphi
fuel-injected bikes . . . . . . . . . . . . . .$719.99
622994 Monitor cartridge for all
ECM controlled Buell® models
from 1999 to present . . . . . . . . . . .$551.99
Replacement Parts for BDM Standard
and Pro Models
22977 Carrying case . . . . . . . . . . . . . . . . . . .$149.69
22990 Adaptor cable (permits BDM monitors
to hook up to Harley® ECM) . . . . .$239.99
22991 BDM operation manual . . . . . . . . . .$49.49
22992 Cartridge for carbureted and
Magneti Marelli injected bikes . .$719.99
Optional Parts
22987 PC Link software (lets your ‘Pro’
model upload data to your PC
for storage purposes) . . . . . . . . . . .$509.99
22988 RS232 cable (used to connect
your ‘Pro’ model to your PC
when used with PC Link) . . . . . . . . .$52.49
22989 Printer cable (lets your ‘Pro’ model
print trouble codes directly to your
printer) . . . . . . . . . . . . . . . . . . . . . . . . .$52.49
17
17.58
DM-45 Inductive AMP Probe
and Multimeter
The DM-45 is engineered for the motorcycle
specialist and is the most versatile multimeter
on the market today. The compact inductive
clamp is designed to easily clamp on small wires
and has enough size to measure large wires.
Easily measures alternator output current, voltage regulator output current and starter draw.
Includes leads for measuring AC/DC voltage,
continuity and OHMS, inductive pick-up for RPM
measurement and includes thermocouple probe
for temperature measurement. The “hold” feature freezes the readout obtained from hard to
read places. The “MIN/MAX” feature will store
minimum and maximum readings obtained
during testing for later display. One touch zero
button zeros display for maximum accuracy.
Includes a convenient carrying case with shoulder strap and belt loop. . . . . . . . . . . . . . . . . .$359.99
Features Include:
• Compact inductive AMP clamp
• Themocouple probe for temperature
measurement
• Leads for measuring continuity and OHMs
• Inductive pick-up for RPM measurement
42376 Sold each
KL-Scan 727 Diagnostic Scantool
by K&L Supply
This multi-function scanner has highly-advanced
technical features that go far beyond any other
aftermarket scanners. It was designed to allow
an independent service technician to retrieve
troubleshooting codes along with detailed
information from the motorcycle’s ECM unit.
The scantool features an auto-detect ECM/EFI
module, ignition waveform analyzer, wiggle test
function, oscilloscope function, four channel
scope display screens, multi-meter function and
an ignition test function. It has the ability to display current and past trouble codes, erases past
trouble codes, records current screen and tests
Delphi® EFI-equipped motorcycles. The screen
displays the current and historical data, along
with graphs and snapshot recordings that can
be downloaded to a printer, and utilizes preprogrammed cartridges.
69300 Complete Scantool kit (includes
cartridge for carburetor-equipped
models from 1995 thru 2001 and
models with Marelli fuel injection
systems from 1999 thru 2001 . . .$2,849.00
69301 Optional Scantool cartridge for
Twin Cam 88® models equipped
with Delphi® fuel injection
systems from 2000 thru 2001 . . . .$371.49
Cylinder Leakage Tester
This tool quickly locates worn or cracked rings,
defective intake and exhaust valves, scored or
cracked cylinders, leaky head gaskets and worn
or stripped spark plug threads by measuring the
amount of compressed air held in an engine
cylinder. The dual gauge is designed to allow
you to monitor the input air line pressure. It
reads up to 100 PSI. This unit has precision pressure regulator which controls exact test accuracy, 25-inch long heavy-duty high pressure hose,
and 14mm and 18mm combination threaded
end, with 14mm extension included for long
reach plugs.
400790 Fits Evolution® Big Twin models
from 1984 thru 1999 . . . . . . . . . . . .$137.99
Auxiliary Gas Tank
Auxiliary gas tank to allow engine testing, while
the original gas tank is off the frame. Includes
four feet of 1/4" fuel line and an ‘in-line valve’
84175 Auxiliary gas tank . . . . . . . . . . . . . . .$53.59
84176 In-line fuel valve ONLY
Battery Chargers
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Motocell™ 1 Amp Battery Charger
Motocell™ 3 Amp Battery Charger
Motocell™ Battery Chargers utilize a patented ‘switched mode’ charging
technology, the world’s most advanced charging technology and the first
true innovation in battery charging technology in over 100 years.
• Safe for use on all 12-volt lead-acid batteries including: gel, AGM,
wet flooded gell, etc.
• Will prolong battery life by preventing sulfation, which can occur when
using a standard ‘linear technology’ or transformer-based charger
• Switched mode technology also means faster charging. Transformer
based and linear mode chargers charge at a rate of 60 pulses per second,
where as switched mode technology charges at a rate of 100,000 pulses
per second. This means our 3 amp charger is the equivalent of a 6 amp
standard charger
• Technology has proven itself in highly demanding applications such as
golf carts, scooters and power wheelchairs
• Single LED changes color to indicate current stage of charging cycle
• The included alligator clips and fused terminal rings connect to charger
with standard trailer connectors
• Includes reverse polarity protection, short circuit protection, over-voltage protection, and AC surge protection
• Lifetime warranty
• Input requirements: 90-132 VAC at 47-63 Hz
• Dimensions: 41/2" x 21/4" x 11/4"
693601 3 Amp Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.95
Motocell™ Battery Chargers utilize a patented ‘switched mode’ charging
technology, the world’s most advanced charging technology and the first
true innovation in battery charging in over 100 years.
• Safe for use on all 12-volt lead-acid batteries including: gel, AGM,
wet flooded gell, etc.
• Will prolong battery life by preventing sulfation, which can occur when
using standard ‘linear technology’ or transformer-based chargers
• Switched mode technology also means faster charging. Transformer
based and linear mode chargers charge at a rate of 60 pulses per second,
where as switched mode technology charges at a rate of 100,000 times
per second. This means our 1 amp charger is the equivalent of a 2 amp
standard charger
• Technology has proven itself in highly demanding applications such as
golf carts, scooters and power wheelchairs
• Single LED changes color to indicate stage of charging cycle
• The included alligator clips and fused terminal rings connect to charger
with standard trailer connectors
• Includes reverse polarity protection, short circuit protection, over-voltage protection, and AC surge protection
• Lifetime warranty
• Input requirements: 90-132 VAC at 47-63 Hz
• Dimensions: 31/2" x 21/4" x 11/2"
693600 1 Amp Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.95
Hand
Controls
Lighting
Electrical
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Yuasa 12-Volt 1.5 Amp
Automatic Battery Charger
Yuasa 12-Volt 900 mA
Automatic Battery Charger
• Fully automatic three level charge cycle for
effective charging: Bulk Charge–concentrated
charging power; Float Mode–maintains full
charge indefinitely; Pulse Mode Technologypeaks battery capacity which enhances battery life
• Reaches 14.4 Volt Peak, then automatically
switches to float
• Reverse polarity protection, spark-free operation and designed to prevent overcharging
• Battery accessory lead and fused ring connectors included
• Two year warranty
2831649 Battery charger . . . . . . . . . . . . . . .$34.95
• Fully automatic 5 stage charge cycle for efficient charging: Pre-qualification–determines
battery condition; Bulk Charge–concentrated
charging power; Absorption–equalizes battery’s cell charge; Float Mode–safely maintains proper charge condition; 28 Day Charge
Recycle–re-evaluates battery status for long
term storage
• This high power unit provides error proof
operation to fully charge maintenance-free
batteries and conventional lead acid batteries
• Provides up to 16 volts to enable recovery of
sulfated batteries during pre-qualification
stage
• Battery accessory leads and fused ring.
connectors included
• Three year warranty
2831650 Battery charger . . . . . . . . . . . . . . .$52.50
Frames
Forks
& Shocks
Yuasa Digital Battery Tester
Developed by Yuasa exclusively for use on
Sheetpowersports batteries.
• Determines accurate battery status in seconds metal
• Tests batteries according to A.H. rating
• Single load, dynamic resistance technology
minimizes battery drain during test
General
• Tests both charged and discharged batteries
• One year warranty
2831681 Battery tester . . . . . . . . . . . . . . . .$299.00
17.59
Cross
Reference
Battery Tender® Chargers
Battery Tender® for ‘Odyssey’ Batteries
SuperSmart™ Battery Tender®
This compact on-board charger is designed to fully charge a battery and
maintain it at proper storage voltage without the damaging effects caused
by trickle chargers. It’s easy to use, and fits in tight places because it
weighs only 21 oz. Comes with a 2 year warranty.
• Advanced Microprocessor Circuitry that correctly charges any type of
lead acid or sealed maintenance-free battery
• Charges any size (capacity) lead-acid battery
• Reverse polarity protection and water repellent circuitry
• Complete three-step charging program (bulk charge, absorption mode,
float mode)
• Measures 5"-long x 4.5"-wide x 2"-tall
15285 Charger for USA and Western Hemisphere . . . . . . . . . . . . . . . . . . .$89.95
686836 Charger for Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
686837 Charger for England/UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
Both the 5 and 10 bank Battery Tenders produce 2 amps per hour during
the bulk charge cycle versus 1.25 amps per hour of the single output
Battery Tender®. Although the increase of only .75 amps seem small, it represents a 60% increase in speed of charge during the bulk charge cycle. For
use with liquid filled batteries. Quick connect alligator clip connections.
15000 5 bank (shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$559.99
15001 10 bank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$699.99
Battery Tender 4-Bank International Charger
®
General
Battery Tender® Plus
The Battery Tender Plus is a 1.25 amp battery charger designed to fully
charge a battery and maintain it at proper storage voltage without the
damaging effects caused by trickle chargers.
• Upgraded circuitry
• Temperature compensated to ensure optimum charge voltage
• Automatically switches from full charge to float mode
• Complete three–step charging program: bulk charge, absorption mode,
float mode
•Reverse polarity protection to ensure safety
15252
Battery Tender® Plus (measures 47/8" L x 31/4" W x 27/8" H) . .$59.99
2851015 Replacement alligator clip-style quick connect harness . . . . . .$5.38
15256
Replacement fused grommet-style quick connect harness . . .$6.74
The 4-Bank International battery tender charging station works anywhere in
the world! Designed to fully charge a battery and maintain it at proper
storage voltage without the damaging effects caused by trickle chargers.
• Features 4 independent charging systems and 12 volts at 1.25 amps per
station
• Weighs less than 3 lbs.!
• Operates anywhere in the world (100-240 VAC 50/60 Hz.)
• Microprocessor controlled constant current charging
• Reverse polarity protected
• Complies to all International safety standards
• Perfect for all AGM, sealed maintenance free and flooded batteries
• Optional 25 ft. extension leads available
• Features 2 year warranty!
615810 4-Bank charger for USA and Western Hemisphere . . . . . . . . . . .$259.95
686834 4-Bank charger for Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
686835 4-Bank charger for England/UK . . . . . . . . . . . . . . . . . . . . . . . .Call for price
615811 4-Bank charger for Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$259.95
615812 4 pack of 25 ft. extension leads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.95
17
17.60
Battery Tender® Chargers
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Battery Tender® Portable
Power Tender International
Battery Tender® Waterproof Automatic Battery Charger
• Sparkproof even when leads are touched together
• Reverse polarity protected – will not damage charger if hooked up incorrectly
• Safe in all weather conditions
• Easy to install and use
• Safe and easy to use on all lead acid batteries
• Will safely charge and maintain any size battery though 200 amp-hour capacity
• Solid-state two color LED indicates start of charge
2851024 Charger for USA and Western Hemisphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.95
686744 Charger for Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
686838 Charger for England/UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
• Utilizes BTM microprocessor technology
• Single output 12-volt battery charger with bi-level
DC output current
• Will not overcharge or overheat a small battery
• Spark proof and short circuit protected
• Reverse polarity protected
• Accessory storage compartment
• Unique 3-wire cable accessories
• Backed by a 2 year manufacturer's warranty
• Comes with easy to follow instructions and connectors
2851025 For USA/Western Hemisphere . . . . . . . . . . . . . . .$129.95
Electrical
Exhaust
Intake
Engine
Gaskets
Battery Tender® International
Finally, a compact, lightweight automatic
battery charger that will operate anywhere around the world! Programmed
specifically for the new sealed maintenance-free AGM (absorbed glass matte)
batteries. Does not shut off or trickle
prior to reaching a full charge.
• Features water resistant case
• Temperature compensation sensor
adjusts voltage for extreme heat
or cold
• Automatically switches from full
to float charge
• High frequency design
• 12 volt – 1.25A output with input voltage range from 100-240V
• Multiple plugs available for most countries
• Weighs 6 oz.
615805 Charger for USA and Western Hemisphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99
686832 Charger for Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
686833 Charger for England/UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price
Optional AC Power Cords
615806 Europe AC power cord (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
615807 England/UK AC power cord (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
615808 Australia AC power cord (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
615809 Japan AC power cord (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
Replacement Parts
2851015 Alligator clip-style quick connect harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.38
15256
Fused grommet-style quick connect harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.74
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Battery Tender Junior
Battery Tender Junior is a 750 mA, lightweight, compact trickle charger with a brain. Ideal for those hard-to-fit spots.
• Fully automatic two stage battery charger perfect for all
lead-acid, sealed maintenance-free and gel cell batteries
• After reaching peak 14.4 VDC, charge automatically switches to 13.2 float voltage
• When voltage drops below 12.6 VDC charge resumes,
changing back to 14.4 VDC
• Two color LED indicates state of charge
• Reverse polarity protected and spark proof
• 12 foot output cord (measures 35/16" L x 25/16" W x 17/8" H)
15002
Battery Tender® Junior . . . . . . . . . . . . . . . . . . . . . . .$34.99
2851015 Replacement alligator clip-style
quick connect harness . . . . . . . . . . . . . . . . . . . . . . . .$5.38
15256
Replacement fused grommet-style
quick connect harness . . . . . . . . . . . . . . . . . . . . . . . .$6.74
17.61
Frames
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Battery Chargers
Motion Pro® BatteryMate
BatteryMINDer® Battery
Charger
Motion Pro®
OptiMate Pro 8
• 12-volt, 1 amp output
• Maintains up to four batteries at one
time
• Never overcharges and restores weak batteries
• High frequency pulses safely removes sulphate from battery’s plates that prevent
batteries from holding a full charge
• For all batteries including gel and deep
cycle
• LEDs indicate charge and desulphation
modes, blinks when charging is complete
• Polarity, short circuit and temperature protected
• Features manual push button override,
two quick connects and a 12-foot cord
656540 BatteryMINDer® . . . . . . . . . . . . . .$59.95
• OptiMate Pro 8 automatically assesses, recovers, charges and tests up to eight batteries
simultaneously
• Works with all 12-volt lead-acid batteries
including sealed types
• Accommodates and deals with batteries of
different sizes, types and conditions simultaneously
• Detects shorted "cell" type defects and
ensures quickest optimal charge regardless
of battery condition
• Simple to read battery status indicator panel
for each battery
• 1.2 Amp constant-current charge, then constant voltage float charge to keep batteries
fresh and ready to go
• Full automatic electronic protection against
inverse polarity connection and short circuit.
No fuses to replace
• So safe, it is impossible to generate a spark,
even by short-circuiting
• Optional wall mount sold separately – leaves
work bench free for batteries and keeps
OptiMate away from acid contamination
• The OptiMate Pro 8 is a drop-ship item only
and can be shipped directly to your dealership. Ask your Sales Representative for details
5008191 Optimate Pro 8 . . . . . . . . . . . . . . .$497.20
5008197 Optional wall mount . . . . . . . . . .$17.30
15247
15250
15246
General
‘EZ Charger’ Battery Charger
This trickle charger delivers a maximum current
of 600mA (milliamps). When it detects that the
battery is nearing full charge, it drops the
charging rate to 10-50mA, approximating the
self-discharge rate of the battery. This insures
that the charger will never “cook” your battery.
The protective circuits also provide “reverse
polarity protection” to shut down the charging
circuit if you hook it up backwards. Each charger
includes a quick-disconnect pigtail with
grommet rings that stay on your motorcycle.
Extra quick-disconnect pigtails with grommet
rings or alligator clips for using the charger on
other vehicles are available separately.
15250 Charger and quick release pigtail
with grommet rings . . . . . . . . . . . . .$35.94
15246 Pigtail with grommet rings . . . . . . . .$5.89
15247 Pigtail with alligator clips . . . . . . . . .$9.99
17
17.62
• BatteryMate is a combination of a load tester
and powerful constant current charger with
automatic desulfating action
• Load tester features six load test choices,
adjustable load test duration (3 seconds for
standard crank test or 15 seconds for long
crank and battery capacity check), protects
against overheating by an automatic disabling rest period which occurs after a 3 or
15 second crank or battery test, clear LED
indications to user during "test" and "rest"
(disabled) periods
• Indicates when battery is too weak to show
a test result
• Offers an automatic (resetting) disablement in
case of overheating, with LED status indication
• Charger features six constant current settings
from 1 amp to 9 amps for correct, most timeeffective charging
• Gives constant current charge followed by
13.8 volts constant voltage maintenance
mode until selected time (max. six hours)
has elapsed
• A LED signals the end of the main constant
current charge and progression to maintenance mode, to indicate the battery can be
tested for starting, or can be left connected
for further "top-up" charging
• Charging timer is selectable in half–hour
increments up to three hours, then hourly up
to six hours
• Effective high voltage mode engages automatically for recovery of deep discharged
and many sulfated batteries
• Automatic charger switch–off in case of
charge time selection change during charging
• Optional wall mount sold separately – leaves
work bench free for batteries and keeps
BatteryMate away from acid contamination
• The BatteryMate is a drop-ship item only and
can be shipped directly to your dealership.
Ask your Sales Representative for details
5008192 BatteryMate . . . . . . . . . . . . . . . . .$749.30
5008197 Optional Wall Mount . . . . . . . . . .$17.30
‘OptiMate III‘ Battery Charger
and Optimizer
This unique and affordable battery optimizer diagnoses, recovers, charges, checks and maintains for
months.
• Electronically protected against user error
• Just connect the OptiMate III to your battery and
the rest is automatic
• There are no switches, no fuse and no sparks
• De-activates automatically if connections are
broken
• Includes 2 interchangeable connection sets; one
with clamps for bench charging, and the other
with an in-line battery protection fuse and eyelet
terminals for permanent attachment to the battery posts for easy connection and disconnection
15259 Optimate for use in North America
• The OptiMate III supplies the minimum float or
and other countries with 110-volt
maintenance voltage (13.6-volts) to keep batterhousehold current . . . . . . . . . . . . . . .$64.79
ies fully charged when stored below 60°F as rec85015 Optimate for use in Europe or
ommended by manufacturers
other countries with 220-volt
• Charges all 12-volt MF and AGM batteries (gel
household current
batteries, maintenance-free lead acid batteries,
and flood cell lead acid batteries)
Electrical Tools
Apparel
Bike Kits
& Trailers
35200
Seats
& Bags
Foot
Controls
GotSpark™ Ignition Tester
Now you can check for fire in your ignition system without getting zapped. It’s safe and easy
to use. Just remove the plug wire and attach it
to the GotSpark lead. Attach the GotSpark
ground clip to a clean ground area away from
the fuel line, or the negative battery terminal.
Then kick or crank the engine over and observe
the tester for visible spark. . . . . . . . . . . . . . . .$15.39
400665
35199
Accel® Spark Plug Indexing Kit
Precisely position spark plug ground electrodes
to aim the spark and flame front across the combustion chamber for faster, more efficient burn.
Billet aluminum tool with gold anodized finish.
Copper indexing washers have varying thickness
to allow exact aiming of plug gap.
400420 Indexing kit . . . . . . . . . . . . . . . . . . . . . .$42.99
35200 Indexing tool ONLY . . . . . . . . . . . . . . .$18.44
35199 Indexing washers ONLY
(30-pieces of assorted thickness) . .$27.51
Battery Overflow Catch Tank
Hand
Controls
Prevents acid overflow damage while still properly venting the battery. Includes a catch tank
made from high-impact plastic which measures
4"-tall x 3/4"-thick, two reusable cable ties and a Lighting
24"-long piece of clear tubing. . . . . . . . . . . . .$6.99
18943 Fits all models
Electrical
Exhaust
Intake
Accel 300+ Perma Crimp
®
™
Crimps the ends on ignition wires. Features precision ratcheting action for application of the
perfect amount of force. Fully adjustable with
3 sets of replaceable crimping jaws for various
gauge wire and crimping tasks. . . . . . . . .$70.94
26919 Sold each
Engine
Static Timer
Permits you to lock your advance position while
you static-time your ignition. Helps reduce kickback while promoting easier starts, smoother
running and longer engine life. . . . . . . . . . .$13.89
20134 For use on 1970 thru 1978 models with
point-type ignitions
Terminal Pin/Receptacle
Extractors
Gaskets
Use with Molex style connectors on most
models 1980-up. . . . . . . . . . . . . . . . . . . . . . . . .$29.99
400376 Pin extractor
400377 Receptacle extractor
Tranny
& Clutch
Driveline
Motion Pro® Degree Wheel
Top Dead Center
Piston Stop Tool
Open Barrel
Terminal Crimper
Easily crimps new-style terminals
introduced on 1996 models. . . . . . . . . . . . . .$21.49
20721 Sold each
Used to set the piston at TDC. Sold each.
24522 Fits all Big Twin and Sportster® models
with 14mm sparkplug holes from 1936
thru 1999. . . . . . . . . . . . . . . . . . . . . . .$18.99
24523 12mm for Twin Cam 88® models,
Evolution® Sportster® models, and
RevTech® heads. . . . . . . . . . . . . . . . . .$18.99
Aluminum construction
with a 63⁄4" outside
diameter and a 6mm
center hole. Can be
used on all motorcycles to check or set
up ignition timing.
May also be used on
4-stroke engines to
check or alter cam
timing.
5008092 Sold each . . . . . . . . . . . . . . . . . . . . .$19.20
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
Points Cam Wrench
This handy wrench is used to turn the points
cam to full advance to aid with the static
ignition timing procedure. Constructed of
sturdy aluminum, it measures 3"-long by
approximately 1"-wide. . . . . . . . . . . . . . . . . . . .$4.49
20128 Sold each
Motion Pro Passing Lamp/Turn
Signal Tool
General
Used to assist in properly tightening the passing
lamp and turn signal mounts. . . . . . . . . . . . .$19.99
20901 Sold each
17.63
Cross
Reference
Engine Tools
JIMS® Wrist Pin Remover Tool
This simple tool can be used easily by one person. No need to get another technician to hold
the piston while your drift the pin out. . . .$82.10
20287 For all models
JIMS® Wrist Pin Reamers
JIMS® Wrist Pin Bushing Tool
Makes it easy to remove and install rod bushings
on all models (except Twin Cam 88® models).
Complete instructions guide you through
removal, selection of new bushing with the
proper clearances, and installation.
20169 Fits all models up to 1999 . . . . . . .$87.99
20295 For Twin Cam 88® models from 1999
to present . . . . . . . . . . . . . . . . . . . . . . .$84.99
Use with rods in or out of motor. These tools
will ream your wrist pin bushings to OEM specifications, and are made to exact tolerances with
pilots to locate from the I.D. of your wrist pin
bushings. They are easy to use with their lead-in
taper at the start of each ream.
22320 Fits all single cam Big Twins from 1936
thru 1999 (including all aftermarket
engines) . . . . . . . . . . . . . . . . . . . . . . . .$132.85
22321 Fits all Sportster® and Buell® models
from 1957 thru 2003 . . . . . . . . . . . .$132.85
22322 Fits all Twin Cam 88® models from 1999
to present . . . . . . . . . . . . . . . . . . . . . .$142.99
RevTech® Big Bore
Cylinder Torque Plates
Now you can repair your cylinder base threads
with these easy to use torque plates. Used on
RevTech® 313/16" and 35/8" cylinders.
51099 Sold each . . . . . . . . . . . . . . . . . . . . .$143.99
Ram-Jett Wrist Pin Bushing Tool
Designed for use on all Big Twin and preEvolution® Sportster® motors with stock to five
inch strokes from 1936 thru 1999 (except Twin
Cam 88® models). Increases productivity quality
and maintains recommended tolerances, taking
the guess work out of sizing wrist pin bushings.
The tool works with the engine in the frame,
and will accurately ream-to-size a clean, straight
and round bushing hole in one pass without
removing the rods from the crankcase.
20118 Includes tool and reamer . . . . . . .$399.99
JIMS® Cylinder Repair Jig
Repair stripped or damaged engine case cylinder
base threads. Tool holds centerline and squareness to factory tolerances with the cases in the
frame using an angle head drill. . . . . . . . .$290.99
20808 For Big Twin models from 1984
thru 1999
General
Note: May be used on Evolution® Sportster® and Buell®
models if shorter spacers are used.
17
15057
15056
JIMS® Cylinder Torque Plates
Connecting Rod Clamping Tool
Holds rod when fitting piston pin bushing.
Used on all V-twin models.
Replaces OEM 95952-33. . . . . . . . . . . . . . . . . .$53.84
400548 Sold each
17.64
Required to accurately bore late-model aluminum cylinders. Simulates stress deformation
of installed cylinder. Drilled for multiple applications up to a 4"-bore. The plates for Twin Cam 88®
models also fit Screamin‘ Eagle® big bore cylinders. Optional bolts are available for use with
Evolution® Sportster® and Buell® cylinders.
20806 For Evolution® Big Twin models .$343.95
20291 For Twin Cam 88® models . . . . . . .$299.99
20807 Optional bolts for Sportster®
and Buell® cylinders . . . . . . . . . . . . . .$27.99
Stud Tools for Evolution® Engines
Ease installation or removal of engine studs on
all Evolution® engines with special high-strength
steel tools by Ram Jett.
15056 Installation tool . . . . . . . . . . . . . . . . .$28.99
15057 Extraction tool . . . . . . . . . . . . . . . . . .$36.99
Engine Tools
Apparel
Bike Kits
& Trailers
Seats
& Bags
JIMS® Piston Pin Keeper Tool
Makes piston pin retaining ring installation a
snap. Fits stock piston pin retainers on Big Twins
from 1983 thru 1999 (except Twin Cam 88®
models) and Sportster® models from 1985
thru 2003. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$92.80
20674 Sold each
JIMS® Cylinder Head Holder
Includes adapters to fit all Original Equipment
and aftermarket heads. Adapters are supported
by a support stand. Simplifies pressing valve
guides in and out. A special guide alignment
shaft is designed into this tool, and holds the
proper angle for optimum guide installations.
Save time and money by installing the guides
in-line with the valve seats. . . . . . . . . . . . . .$457.40
22308 Complete kit
Foot
Controls
Jims® Complete Engine and
Transmission Case Stand Kit
Hand
Controls
This kit provides a solid and versatile work
center for a variety of engine types. With this
kit, an engine builder can freely position complete engines and transmissions into the most
optimum working position. The base stand
allows 360º of rotation while the modular
cradles, swivel and lock in 180º, 90º and 45º
angles. The base easily bolts to a work bench
and comes ready to use with all hardware
included. Each piece is constructed from high
quality steel.
671021 Use on all Twin Cam 88®, Big Twin,
Sportster® engine cases and 5-Speed
transmissions . . . . . . . . . . . . . . . . . .$732.15
Lighting
Electrical
Exhaust
Trock Evo Lapping Ring
Laps 31/2" and 35/8" cylinders to obtain a flat
sealing surface to avoid blowing gaskets. This is
a double sided lapping ring that cuts fast with
minimum effort. Complete with instructions and
lapping compound. . . . . . . . . . . . . . . . . . . . . .$110.99
400304 Sold each
Intake
Engine
400740
400741
Gaskets
Manley® Piston Ring Grinder
Flex-Hone® Cylinder Bore Brush
A resilient, flexible honing tool with a soft cutting action, the Flex-Hone® process produces
a controlled surface condition. The abrasive
globules self-compensate for wear and impart
a crosshatch for oil retention and instant ring
seating.
400795 31/4" (83mm), 240 grit. For 3" to 31/4"
bore sizes . . . . . . . . . . . . . . . . . . . . . . .$78.99
400796 31/2" (89mm), 240 grit. For 31/4"
to 31/2" bore sizes . . . . . . . . . . . . . . .$83.99
400797 33/4" (95mm), 240 grit. For 31/2"
to 33/4" bore sizes . . . . . . . . . . . . . . .$88.84
400798 41/8" (105mm), 240 grit. For 33/4"
to 41/8" bore sizes . . . . . . . . . . . . . . .$95.99
Tranny
& Clutch
This bench-top, manual grinder works on any
type or size piston ring. It allows you to grind
the end gap for oversize rings to proper specs.
The tool handle attaches easily with an Allen
wrench. An L bracket is also provided for table
Driveline
top mounting. Replacement disc sold separately.
400740 Complete tool . . . . . . . . . . . . . . . . . .$179.99
400741 Replacement disc . . . . . . . . . . . . . . . .$37.39
Wheels,
Tires
& Brakes
JIMS® Exhaust Stud Drill Plate
Guides and aligns the drill bit when removing
broken exhaust studs. Use with a tap after to
clean the threads. Can be used in the frame.
Includes drill bit. . . . . . . . . . . . . . . . . . . . . . . . . .$89.99
20940 For Evolution® models
Frames
Forks
& Shocks
Intake Manifold Wrench
The ultimate manifold wrench - saves time and
money by allowing removal of the carb and manifold without disturbing the gas tank or dash. Works
on all Evolution® Big Twins from 1984 thru 1999 and
Sportster® models from 1986 thru 2003 . . . . . .$24.99
400450
Sheetmetal
JIMS® Piston Ring Compressor
Extra fine tooth ratcheting mechanism will compress rings in small increments without breakGeneral
ing. Includes 6 bands ranging from
23/16” to 43/8”. . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99
400357
17.65
Cross
Reference
Engine Tools
400712
400713
400711
Wrenches by Kastar Hand Tools
Ratcheting Rocker Box Cover Wrench
93/4"-long, chrome-plated 1/4" drive single end reversible ratcheting
wrench has a vinyl grip.
• Uses standard sockethead bit
• Low-profile for frame to rocker box clearance
• Long handle for increased reach
• Comfortable rubber grip will not scratch chrome
400711 Fits all models with Evolution® engines . . . . . . . . . . . . . . . . . . . . .$43.99
Ratcheting Engine Output Shaft Wrench
Chrome plated E-Z Grip single end offset ratcheting box wrench is
reversible, and the handle is offset so it doesn't interfere with the motor
case. Comfortable screwdriver style handle allows the user to apply more
turning power with less pressure and fatigue to the hand. Available to fit
Sportster® and Big Twin models.
400712 Fits Evolution® Sportster® models with 6-spline shaft . . . . . . . . .$39.99
400713 Fits All 1340 cc Big Twin engines with 10-spline shaft . . . . . . . .$39.99
Flat Rocker Box Wrench by Motion Pro
Specially designed for use on Evolution® and Twin Cam 88® engines. Made
flat for hard-to-reach places. Eases removal of rear rocker box when engine
is still in the frame. Built with a 3/16" hex head and an adapter hole for a
torque wrench. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.89
04700 Sold each
Rocker Box Screw Tool
Designed specifically to access Evolution® rocker cover sockethead bolts
with the engine in the frame. Many other uses where space is limited.
Fits 3/16" hex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.39
400515
Motor Mount Bolt Wrench
Allows easy left rear motor mount removal without
inner primary disassembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$92.99
20466 For Big Twins 1948 thru 1999
S&S Rocker Cover Wrench Set
General
Speeds up installation and is recommended for professional use. Includes
four different wrenches that work on all the hard-to-reach bolts on Twin
Cam 88® and Evolution® rocker boxes. Compatible with any 5/8" socket
or wrench.
46772 Complete set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.95
JIMS® Rocker
Bushing Puller
Removes rocker arm
bushings or roller
bearings in one easy
operation. . . . . . . . . . .$122.10
20446 For Big Twins from
1966 to present
and Sportster® or
Buell® models
from 1957 thru
2003
17
17.66
JIMS® Rocker Bushing Reamer
Precision reamers made from the finest heat-treated
tool steel, and accurately dimensioned to exacting
tolerances. Used for precision alignment and sizing of
rocker bushings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$141.05
20692 Fits Big Twins from 1966 to present and
Sportster® models from 1957 thru 2003
Engine Tools
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
JIMS® Valve Spring Compressor
Designed specifically for the heads on
Hand
Evolution® models, but will work with all Big
Twins. It features a hardened ball bearing at the Controls
valve head end to eliminate damage to valves.
Comes with new valve collar receiver for safer
tool usage. . . . . . . . . . . . . . . . . . . . . . . . . . .$136.05
Lighting
20696 For all Evolution® Big Twin
and Sportster® engines
JIMS® Compression Release Valve
Drilling Fixture
Use this tool for machining and preparing heads
to install Jims® compression release valves.
Install on front or rear head, with or without
the valves installed. Simply drill, spot face, tap
and install compression release valves.
671019 Use on all Twin Cam® engines . .$182.00
Valve Spring Compressor
Specially designed to ease head work on latemodel bikes. . . . . . . . . . . . . . . . . . . . . . . . . . .$68.99
20722 Fits all Twin Cam 88® and Evolution®
Big Twin and Sportster® engines
Electrical
Exhaust
Intake
Engine
Gaskets
Rowe Valve Guide Installation
Tool Set
For use on Evolution® cylinder heads. This tool
pushes intake and exhaust guides to the correct
height while assuring they are square to the
valve seat. Set includes valve seat centered
adapters, precision-machined shouldered guide
driver and assembly lube. . . . . . . . . . . . . . . .$99.99
24350 Complete set
Tranny
& Clutch
JIMS® Valve Guide and Seal Tools
Precision tools permit accurate installation of
valve guides and seals.
20675 For installation of valve guide
seals on all Evolution® engines . .$38.60
20676 For installation of shoulderless
valve guides to the proper depth
on all Evolution® engines . . . . . . .$28.50
20671 For installation of shoulderless valve
guides to the proper depth on 1957
thru 1985 Sportster® models . . . .$35.60
JIMS® Breather Reamer
Repairs damaged breather holes in less than an
hour to use a +.030" oversized breather gear
without removing the case. . . . . . . . . . . . .$499.99
20945 For Big Twin models from 1936 thru
1999 (except Twin Cam 88® models)
Driveline
Wheels,
Tires
& Brakes
Valve Guide Removal Tool
and Installation Tool Handle
Used to drive shoulderless valve guides out and
with above tools for installation.
20716 Sold each . . . . . . . . . . . . . . . . . . . . . .$21.05
Frames
Forks
& Shocks
JIMS® Head Bolt Torque Gauge
for Evolution® Engines
Allows the measuring of 90° when tightening
head bolts. Torque sequence laser-etched
on gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.14
20805 For all Evolution® engines from 1984
thru 1999
JIMS® Gear Shaft Nut
Socket Wrench
Sheetmetal
Secures the pinion gear nut to the
pinion gear shaft. Fits Big Twins from
1955 thru 1999. . . . . . . . . . . . .$34.99
20690 Replaces OEM 94555-55A
General
17.67
Cross
Reference
Engine Tools
Tappet Guide
Puller for
Sportster®
Models
Tappet Roller Tool
This high-quality American-made
tool prevents damage to the tappet body during the removal and
replacement of all types of tappet
rollers. Fits the tappets of all Big
Twin and Sportster® models including Evolution® models.
20185 Sold each . . . . . . . .$149.99
24079 Replacement
tappet roller axles
(pack of 4) . . . . . . . . .$9.49
Removes pressfit tappet
guides from
the crankcase
after tappet
body adjusting screw is
removed. Fits Sportster® models
from 1957 thru 1978. . . . . . .$33.10
20104 Replaces OEM 95724-57
JIMS® Tappet
Screen Plug Tool
JIMS® Pinion Gear
Lock Tool
Magnetic Tappet Lifter
Holds up the tappets while
installing or removing a cam.
These billet aluminum tappet tools
have industrial magnets on the
ends and easily hold the tappets
off the cam. Indispensable for
changing the cam on Evolution®
Big Twin engines. . . . . . . . . . .$63.99
20206 Set of two
Locks pinion gear, necessary to
torque the pinion nut. Tool screws
to case and holds pinion gear stationary. . . . . . . . . . . . . . . . . . . . .$96.10
20785 For Big Twin models from
1954 thru 1999 (except
Twin Cam 88® models)
Fits over the round slotted screw
and permits your wrench to be
used to take plug out instead of
using screwdriver and having to
remove exhaust. . . . . . . . . . . .$21.99
20814 For all Big Twins with
slotted screw
JIMS® Tappet Block
Alignment Tool
Used to make sure the roller tappet tracks on the center line of the
cam lobe. . . . . . . . . . . . . . . . . . .$15.59
20670 Fits Big Twins from
late 1977 thru 1999
JIMS® Pinion Gear Puller
JIMS® Pinion
Bushing Puller
Removes pinion bushing from
cam cover in one easy operation.
Use with JIMS® cam cover holder
(CC #20460). . . . . . . . . . . . . . .$115.15
20445 For Big Twins from 1954
thru 1999
Used to remove the pinion gear on
all Big Twin and Sportster® models
(except Twin Cam 88® models).
May also be used to install pinion
gear on Big Twin and Sportster®
Collar included. . . . . . . . . . . .$183.05
JIMS® Pinion Line
Bushing Reamer
Made from heat-treated tool steel
accurately dimensioned to size
Big Twin pinion bushings in cam
covers from the right case race.
Fits Big Twins from 1954 thru 1999.
Also fits idler gear bushing on
Sportster® models. . . . . . . . .$279.99
Tappet Tool, by Motion Pro®
General
Allows clearance to remove and fasten the tappet oil filter screen cover without
removing exhaust on some models, and avoid scratching your engine cases.
• Contains o’ring to retain the tool in a 7/16" wrench or socket drive.
• Hex 7/16" drive allows more rotation without contacting engine cases.
• Flange design allows downward force to be applied to tool.
• The tappet oil filter screen is required to be serviced at every oil change.
• For use on all Big Twin Models (except Twin Cam) with slotted screw tappet oil
filter screen cover.
640110 Tappet Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.90
17
17.68
Engine Tools
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
JIMS® Valve Guide Pusher Set
Allows accurate valve guide installation in
Evolution® engines without driving it in with a
hammer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$154.99
400351 Fits 5/16" I.D. guides
400352 Fits 3/8" I.D. guides
Hand
Controls
Pushrod Tube Clip Tool
by Motion Pro
Easy-to-use tool prevents scraped knuckles and scratched engine parts from
using screwdrivers. Sold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74.90 Lighting
5008172 For all models
Electrical
Exhaust
Intake
Engine
Valve Guide Driver Set
JIMS® Mini Valve Spring Tester
Use with your vice, arbor or drill press to measure valve spring
pressure from 0 to 600 PSI. Rubber gauge boot reduces shock
and protects the instrument during use. . . . . . . . . . . . . . . .$179.99
400353
3 piece driver set for valve guide installation and removal on
Big Twin and Sportster® models. Includes drivers for 5/16",
11/32", and
3/8" I.D. guides. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.80
400562
Gaskets
Tranny
& Clutch
400656
400657
Driveline
400655
400659
Wheels,
Tires
& Brakes
400658
Valve Seal Installation Tools
Drivers and sleeves for proper installation of CC
and OEM valve guide seals on OHV Big Twins
and Sportsters® 1948-up.
Trock Rocker Arm
Grinding Fixture
This is the easiest way to repair and recontour the rocker arm
pad while overhauling cylinder heads. This allows the valve
stem to have full and smooth contact with the rocker arm
immediately with no valve damage. This tool is used with
your drill press and sanding or
grinding disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99
400300
Frames
Driver/Installer (Sold each)
400656 White. Fits 5/16" and 3/8" seals . . . .$3.49
400655 Black. Fits most seals . . . . . . . . . . . . . .$3.49
Forks
& Shocks
Sleeves (Sold in 5 pack)
400657 Green (5/16”). . . . . . . . . . . . . . . . . . . . .$4.49
400658 Yellow (11/32”). . . . . . . . . . . . . . . . . . .$4.49
400659 Red (3/8”). . . . . . . . . . . . . . . . . . . . . . . .$4.49
Sheetmetal
General
17.69
Cross
Reference
Cam Tools
20629
20695
Crane Cam Installation Tool
JIMS® Cam Tools
Bearing Puller
Easily pulls the inner cam bearing
without splitting the cases. It also
keeps the rollers from coming out
during removal. . . . . . . . . . . .$120.99
20695 Fits Big Twin models from
Cam Bushing Reamer
Line reams cam cover bushings
from inner cam bearing for a
true centerline between the
two dimensions. . . . . . . . . . .$187.99
Crane Cam Tune-A-Cam Kit
Now it’s quick-and-easy to degree your camshaft
for maximum performance with this unique kit.
Includes a large, easy-to-read degree wheel,
dial indicator, TDC locator, and lightweight
checking springs packed in a high-impact plastic
case. You can also check camshaft and crankshaft end play, shaft and gear runout.
20132 Complete kit . . . . . . . . . . . . . . . . . . .$300.00
22298 Degree wheel ONLY . . . . . . . . . . . . .$43.54
No need to remove the rocker covers and rocker arms from
your Evolution® Big Twin engine to make a cam change. This
tool holds the tappets up in the lifter blocks while you work.
No need to remove pushrods, pushrod covers, tappets and
tappet guides. Includes instructions for installing adjustable
pushrods. Fits Big Twin motors from 1948 thru 1999 (except
Twin Cam 88® models) when installing a cam and adjustable
pushrods. This tool is for use on Evolution® motors when
installing adjustable pushrods or for Shovelheads when performing hydraulic or solid tappet conversion kits. . . . . . .$37.54
Delkron
Space-N-Time Tool
Fits Big Twin engine cases (except
Twin Cam 88® models) from 1970
thru 1999. It lets you check the
cam, the cam gear and its end
play, gear lash, and tappet specifications in one easy setup. Also
checks: breather gear end play,
timing gear lash, tappet roller-tocam contact, lifter block alignment, pinion shaft runout, point
cam runout, as well as breather,
cam and flywheel timing. . . .$96.24
17111 Complete kit
Zipper’s Cam Lobe
Clearance Cutter
Can be used with the engine in the
frame. Bolts to the engine case
across the cam cover face, and has
an adjustable cutter powered by
any 1/2" drill. The cutter provides
additional clearance for the front
intake cam lobe in the pinion
race area. . . . . . . . . . . . . . . . . .$149.99
20130 For all single cam Big Twin
engines 1970 thru 1999
JIMS® Cam Bearing
Puller for Sportster®
Models
Removes inner cam bearings without splitting the cases. Pulls bearings from the case while keeping
the rollers in the cage. . . . . .$124.80
20810 For Sportster® and Buell®
models from 1957 thru
1990
General
JIMS® Cam Seal
Installer/Remover for
Late Model Big Twins
Install or remove cam seal without
removing the cam cover. Easy-touse tool pulls the seal and drives
in a new one flat and square for
a no-leak repair. The tool can also
be used to remove the cam cover
from the case. . . . . . . . . . . . .$102.65
20762 For all Big Twins from
1970 thru 1999
Motion Pro® Swingarm
Pivot Bearing Puller
Cam Timing Tool
for Sportster® Models
Precision tool by A.R.T. (Advanced
Racing Technology) is used to
position cam lobe in the correct
relationship to the cam gear and
establish perfect valve timing.
20312 For Sportster®
and XR cams . . . . .$199.99
17
17.70
Used for removal and installation
of the swing-arm pivot bearing on
all Softail® models and the front
fender mount bearing on Springer
Softail® models.
5008140 Sold each . . . . . . . .$49.90
JIMS® Inner Cam
Bearing Remover
Designed like the version for
Evolution® models, it removes the
bearing easily without any damage to the crankcase. This precision-built tool will also keep the
pin rollers from accidentally falling
into the crankcase. . . . . . . . .$109.99
20292 For Twin Cam 88® models
from 1999 to present
Cam Tools
Apparel
Bike Kits
& Trailers
Seats
& Bags
Trock Nose Cone Puller
This tool was built for shop use. It has hardened
timer plate screws that are trapped in the puller
body, so they don’t get lost. This puller removes
Big Twin nose cones with the cam shaft still
loaded, to save time while changing covers, or
in conjunction with the Cam Jack to service cam
chest gears without cam removal. Fits single cam
Big Twins from 1970 thru 1999 . . . . . . . . . . .$59.99
400301 Complete kit
Trock Cam End Play Checker
with Indicator
This is a must have tool when engine building
or changing out the cam. The micrometer dial
indicator is the ultimate in accuracy, and eliminates all guesswork. It has enough leverage to
be used with the pushrods still in place.
Not for use on Twin Cam 88® models . . . . .$99.99
400308 Fits Big Twins from 1970 thru 1999 and
Sportster® models from 1971 thru 2003
Foot
Controls
JIMS® Cam & Pinion Gear
Gauge Pins
Use to check gear diameters when changing
cams or pinion gears on single cam Big Twins
ONLY. Sold in sets of 2 . . . . . . . . . . . . . . . . . . .$20.00
400362 Fits Big Twins from 1954 thru 1989
(.105" pins)
400363 Fits Evolution® Big Twins from 1990
thru 1999 (.108" pins)
Hand
Controls
Lighting
Electrical
Exhaust
Intake
Cam Cover Puller
Trock Cam Jack
This is a recently developed tool that will save
two hours of shop labor time when anything in
the cam chest, except the cam, needs to be
replaced or worked on. This Big Twin tool is
installed on the engine case after removing the
cam cover (with the Trock Nose Cone Puller).
The Cam Jack then raises the cam a small
amount and holds it while pinion gear changes,
breather gear or oil pump work is completed.
This saves the rocker cover/fuel tank and related
parts tear down and re-assembly time. Fits single cam Big Twins from 1970 thru 1999. . .$99.99
400305 Complete kit
Used on single cam Big Twins from 1970 thru
1999 for easy cam cover removal. Sockethead
wrench not included. . . . . . . . . . . . . . . . . . . . .$30.49
400525 Complete kit
Engine
Gaskets
Tranny
& Clutch
Cam and Pinion Gear Lash Tool
by Merch
JIMS® Cam Gear Remover
and Installer
This precision tool will remove the cam gear on
any single cam Big Twin from 1970 thru 1999,
and reposition it on another cam shaft in
exactly the same spot. Pressing the gear on
in the advanced or retarded position is also
possible. Save time and ensure accuracy time
after time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205.40
400340 Complete kit
Trock Cam Bearing
Installation Tool
Quick, easy and accurate, this tool speaks for
itself. No more juggling pins, micrometers, and
gears to get a measurement that may only be
close to accurate. With this tool, all the guesswork has been removed. The indicator base
mounts to the gear cover and the indicator
foot mounts directly on the end of the cam.
With a simple adjustment of the foot you can
see exactly what the gear lash is in .001" increments. Includes instructions. . . . . . . . . . . . .$359.99
400004 Complete kit
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
The installer tool actually is a screw press that is
accurately located by the nose cone dowel pins
and incorporates a thrust bearing and shouldered drive plug to install the inner cam bearing
to the proper depth without distorting the bearing shell, unlike all of the non-piloted hammer
type drivers. Fits single cam Big Twins from 1970
thru 1999. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$104.99
400303 Complete kit
Sheetmetal
General
17.71
Cross
Reference
Cam Tools
JIMS® Cam Removal
and Installer Tool
This multi-function tool will remove and replace
front and rear camshafts and ball bearings. It
precisely holds the camshaft to insure a smooth
press in and out of the support plate. . . .$119.99
to present
JIMS® Inner Cam Bearing Installer
Installs the two inner cam needle bearings
by aligning the shaft bores for a precision
press-fit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.99
to present
JIMS® Cam Bearing Puller
Once the camshafts are removed from the support plate, this tool will remove the bearing.
Unlike a general purpose puller this tool was
designed to remove the bearing straight with
no slipping or binding. . . . . . . . . . . . . . .$166.99
to present
JIMS® Crankshaft Bushing
Remover and Installer
JIMS® Crankshaft Bearing Tool
For removal and installation of the crankshaft
bushing in the support plate. This tool is piloted
for accurate operation. . . . . . . . . . . . . . . . . . .$76.99
to present
Removes and replaces the right crankcase bearing. Precision-made of non-marring Delrin, and
piloted the to press bearing in and out with no
damage to the case. . . . . . . . . . . . . . . . . . . . .$113.60
to present
JIMS® Wrist Pin Bushing Tool
Removes and replaces the wrist pin bushing
without removing the connecting rod from
the crankcases. . . . . . . . . . . . . . . . . . . . . . .$84.99
General
JIMS® Cam Chain Tensioner Tool
Used to unload pressure on the primary and
secondary chain tensioners to assemble and
disassemble cams. Also checks spring loads on
chain tensioners. . . . . . . . . . . . . . . . . . . . . . . . . .$36.99
to present
JIMS® Cylinder Torque Plates
JIMS® Camshaft and Crankshaft
Sprocket Lock Tool
Permits the technician to lock the camshaft
and crankshaft sprockets to remove, replace
and torque the sprocket bolts. Made from
non-marring Delrin. . . . . . . . . . . . . . . . . . . . . .$35.80
to present
17
17.72
To check cylinder measurements accurately,
these torque plates are essential. Plates simulate
stress conditions when boring and honing.
These plates are lasered with the correct
torquing sequence and will fit Screamin‘ Eagle®
big bore cylinders. . . . . . . . . . . . . . . . . . . .$299.99
Cam Tools
Apparel
Bike Kits
& Trailers
Seats
& Bags
JIMS® Cam Cover
Holding Tool
Holds cam cover for removing and
installing bushings. Clamps in vice
or mill. Especially useful on chrome
or polished cover to hold cam
cover flat and keep it from being
scratched. . . . . . . . . . . . . . . . . . .$67.10
20460 For Big Twin models
from 1970 thru 1999
Foot
Controls
JIMS® Drill Jigs
for Precision Bushing
Dowel Pin Location
These drill jigs ensure exact factory
bushing dowel pin location when
building performance engines.
Supplied with jig and drill bit.
20621 For cam bushings
on Big Twins from
1936 thru 1969 . . . .$34.99
20622 For cam bushings
on Big Twins from
1970 thru 1999 . . . .$34.99
20628 For pinion bushings
on Big Twins from
1936 thru 1953 . . . .$34.99
20623 For pinion bushings
on Big Twins from
1954 thru 1992 . . . .$34.99
Hand
Controls
JIMS® Cam Cover
Bushing Reamer
Permits reaming of the cam cover
bushing, without disassembly of
the crankcases and without the
need of another right engine case,
by piloting off the cam bearing.
Works on the bench or in the
frame. Bolt the reamer plate to
the right case, and bolt the cam
cover to the reamer plate aligned
with the two dowel pins. Special
design prevents chips from entering the engine. . . . . . . . . . . .$629.99
EZ Cam-Gear Tool
The easiest way to time and install Lighting
cam gears for the quietest possible
cam gear train. +/-4° to 8° timing
as well as zero degrees for stock.
Comes complete with alignmentpress fixture, cam gear degree
Electrical
index pins, camshaft index pins
for most makes of cams and
instructions. . . . . . . . . . . . . . .$195.50
Exhaust
Intake
Engine
JIMS® Cam Cover
Bushing Remover
for Early Big Twins
Removes the cam cover bushing
quickly in one easy operation.
20809 For Big Twin
models from
1936 thru 1969 . . .$124.80
Gaskets
JIMS® Inner Cam
Bearing Gauge
for Big Twins
A go/no-go gauge set that easily
and accurately checks the inside
diameter of the inner cam bearing.
20775 For Big Twins from
1958 thru 1999 . . . .$53.25
Tranny
& Clutch
JIMS Cam Bearing and
Bushing Alignment Tool
®
Check the alignment of cam bearing and cam cover bushing to
within .0003". Detects misalignment that causes binding of cam
and premature wear. . . . . . . .$53.90
20776 For Big Twin models
from 1970 thru 1999
JIMS® Bearing
Race Drivers
Cam Bearing Driver
Used to install inner cam bearing. Fits single cam Big
Twins from 1958 thru 1999. . . . . . . . . . . . . . . . . . . .$49.99
Driveline
JIMS® Inner Cam
Bearing Installation
Tool for Big Twins
Wheels,
Tires
& Brakes
Smoothly presses the inner cam
bearing to the right depth into the
right-side case when both case
halves are assembled. . . . . . . .$99.99
Frames
20774 For all Big Twin models
from 1958 thru 1999
Forks
& Shocks
Driver Handle
Handle for bearing drive tools.
20666 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.50
Sheetmetal
General
17.73
Cross
Reference
Flywheel & Sprocket Shaft Tools
20666
JIMS®
Sprocket Shaft Tools
JIMS® Flywheel Timken®
Bearing Remover
Used to remove Timken® bearings
from sprocket shafts without removing shafts from the flywheels.
22303 Fits stock flywheels on
Big Twins from 1986
thru 1999 . . . . . . . . .$175.15
20459 Fits stock flywheels on
Big Twins from 1955 thru
1985, and aftermarket
flywheels from 1955 to
present . . . . . . . . . . .$175.15
20819 Fits Sportster® models
1957 thru 1976 . . . .$201.90
20727
For installing the crankshaft into
the crankcase Timken® bearing.
JIMS Sprocket Shaft
Bearing Race Tools
For Sportster Models
20114 Fits Sportster® and K
1976 (1977-up models
require the adapter
listed below) . . . . . .$114.99
Bearing Race Remover and
Installation Tool With Race
Tool Spacer
Use with bearing driver tools to
apply outward pressure to grip the
race for easier installation and
removal.
20727 For CC #20688
and #20689 . . . . . . . .$69.99
®
For Big Twin Models
1955 thru 1999 . . . .$124.99
®
Adapters for Sportster®
Models
For use with CC #20114.
20683 Installs crankshaft assembly into crankcase Timken
bearings, 2.060"-long.
Fits models from 1977
thru 2003 . . . . . . . . . .$23.95
20684 Installs crankshaft assembly into crankcase Timken
bearings, 2.500"-long.
Fits models from 1977
thru 2003 . . . . . . . . . .$25.60
Sprocket Shaft Bearing Race
Tool for Big Twins
Used to remove and install Timken
bearing race in motor case.
1955 thru 1999 . . . . .$51.00
Sprocket Shaft Seal Tool
Used with CC #20116 to press oil
seal over sprocket shaft into the
case.
1969 thru 1999 . . . . .$72.00
Driver Handle
Handle for bearing drive tools.
20666 Sold each . . . . . . . . . .$54.50
Sprocket Shaft Bearing Tool
Used with to remove and install
Timken bearing race in motor case.
20689 Fits Sportster® models from
1977 thru 2003 . . . . .$51.00
JIMS® Flywheel Sockets
Low profile, yet provide 100% nut
coverage. The socket end is
machined flat to eliminate rounding-off the flywheel nut. Made
from 4130 chrome-moly and heattreated for strength.
20630 15/16" x 1/2" drive for
crank pin nut on 1954early 1981 Sportster®
models . . . . . . . . . . .$135.99
20635 13/8" x 1/2" drive
for crank pin nut on
Sportster® models from
1981 thru 2003 . . . . .$53.25
20822 13/16" x 1/2" drive for
pinion shaft nut on
Big Twins from 1941
thru early 1981 . . . . .$59.99
20631 15/16" x 1/2" drive
for crank pin nut
on 1954-early 1981
Big Twins . . . . . . . . . .$53.25
20632 11/2" x 1/2" drive for
crank pin nut on
Big Twins from 1983
thru 1999 . . . . . . . . . .$53.25
20633 11/4" x 1/2" drive for
pinion shaft nut on
late 1981 thru 1989
Big Twins . . . . . . . . . .$53.25
20634 15/8" x 3/4" drive for
sprocket shaft nut on
Big Twins from 1972
thru 1999 . . . . . . . . . .$59.99
JIMS® Snap Ring
Installation and
Removal Tool
General
Removes and installs the Timken®
bearing outer race snap ring. A
must for replacing rings in cases
without inserts. No more gouging
the aluminum surrounding the
snap ring. . . . . . . . . . . . . . . . . . .$77.99
20943 Fits Big Twin models
from 1969 thru 1999
(except Twin Cam 88®
models)
17
JIMS® Big Twin Case Lap
JIMS® Rod Lapping Tool
Fits Big Twins, Sportster® and K
models, 45" and Indian® rods
(except Twin Cam 88® models).
Includes arbor assembly, 1.500" lap
for 45", Indian® and some case
races. 1.625" lap for Big Twin,
Sportster® and K model rods.
26409 Lapping tool . . . . .$249.99
17.74
Faster and more accurate than
conventional lap tools. The lap is
guided on both sides of the pinion
bearing for unmatched accuracy –
within .0002" of case centerline –
which makes it possible to power
lap with a low speed drill motor
without fear of chatter in the
lapped bearing race. All wear surfaces are hardened and ground
tool steel for a lifetime of service.
from 1958 thru 1999
models) . . . . . . . . . . .$579.99
JIMS® Flywheel
Sprocket Shaft Holder
for Big Twins
Splined tool holds the sprocket
shaft and flywheel assembly in a
vise, with or without the left case
attached. . . . . . . . . . . . . . . . . . . .$84.35
from 1955 thru 1999
models)
JIMS® Compensating
Sprocket Wrench
New design tool is compact and
easier to store in toolboxes.
Requires a 1/2"-drive ratchet or
breaker bar. . . . . . . . . . . . . . . . .$53.25
20423 Fits FL models 1955-early
1970 and Sportster®
models from 1957
thru 1976
Flywheel & Crankshaft Tools
Apparel
Bike Kits
& Trailers
Seats
& Bags
Crankshaft Truing Stand
Works on most engines (except
Twin Cam 88® models). Combines
outstanding value with full-function features, including 10" righthand swing, 6" left-hand swing
and 18" center-to-center capacity.
80 lb. pro-grade unit is sold complete, and fitted with beam indicators, accurate to +/-.002". . .$706.99
24342 Flywheel truing stand
Note: Flywheel truing stands NOT SHIPPED
FREE FREIGHT
Replacement Parts
24326 Indicator . . . . . . . . . .$66.99
24327 Live center . . . . . . . .$34.99
24328 Dead center . . . . . .$27.99
24329 Bearing bracket . . .$45.99
24344 Handle . . . . . . . . . . .$35.99
Flywheel ‘Jam’ Tool
Holds the crankshaft in the TDC
(top-dead-center) position when
installing cams. It threads into the
cases in place of the timing hole
plug and permits you to snug it up
to the flywheels with the timing
mark showing through its hollow
center. It was designed for use on
Sportster® engines which have a
tendency to rotate past TDC when
changing cams, but it may also be
used on Big Twins. . . . . . . . . .$10.99
20188 Sold each
Foot
Controls
JIMS® Crank
Removing Tool
Use to press crankshaft/flywheel
assembly from cases and press case
halves apart and break sealant
bond. Hard cap, available separately, is needed for some pressing
operations on end of sprocket shaft.
20458 Crank assembly
removal tool . . . . .$155.30
20815 Sprocket shaft
hard cap . . . . . . . . . .$30.80
Hand
Controls
JIMS® Wrist Pin/Rod
Alignment Tool
Checks rod straightness without
removing rods from case.
Measures 41/2"-long. . . . . . . .$18.55
20298 Fits all single cam Big
Twins ONLY (including
aftermarket and S&S)
Lighting
Electrical
Exhaust
Intake
Crankshaft Turning Tool
Splined socket engages the sprocket shaft to turn the crankshaft
when the primary drive is disassembled. Especially useful during
engine assembly to set ignition
timing, check cam timing and
valve-to-piston clearance. . .$39.99
20268 Fits sprocket shaft splines
on all Big Twins from
1970 to present
Flywheel Spreader
Provides leverage to separate
flywheels. . . . . . . . . . . . . . . . . . .$72.99
20465 Fits flywheels on Big Twin
and Sportster® models
Engine
S&S Connecting Rod
Checking Pins
For checking alignment after rods
have been installed in flywheels
and lower end is assembled. For
Evolution® Big Twin models and
Sportster® model connecting rods.
20848 Sold each . . . . . . . .$20.69
Gaskets
JIMS Timken
Bearing Simulator
®
®
Designed to allow quick and easy
removal and replacement of the
flywheel in the left-side crankcase.
Permits checking of rod-to-case,
piston-to-flywheel and cylinder-toflywheel tolerances. . . . . . . .$52.99
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
JIMS® Rod Race Tool
Flywheel Rebuilding Jig
Top-quality, aluminum-alloy
flywheel rebuilding jig for all
Original Equipment and aftermarket
flywheels. Simplifies all flywheel
rebuilding jobs. . . . . . . . . . . . .$245.99
24340 Complete kit
Supports both sides of the rods
while the races are removed or
replaced, minimizing the possibility of distortion to female rod
or race. . . . . . . . . . . . . . . . . . . .$145.74
20000 Fits all Twins
S&S Crankpin Nut
Clearance Gauge
Paint the boss to be clearanced
with machinist‘s blue dye and use
the tool to scribe proper location
to permit precise machining for
crankpin nut clearance. . . . .$19.95
Forks
& Shocks
JIMS® Timken® Bearing
Race Installer
Sheetmetal
Installs bearing races square and
true in the left crankcase . A must
for late engine cases. . . . . .$164.99
20820 For Big Twins from 1969
thru 1999; Sportster®
and Buell® models from
1987 thru 2003
General
17.75
Cross
Reference
Crankshaft Tools
JIMS® Crankshaft Guide
This tool will spread crankcase pinion bearing
rollers while reassembling right side engine case
on to flywheel assembly. . . . . . . . . . . . . . . . . .$22.80
400392 Fits all Twin Cam 88® models from 1999
to present
‘Clean Time’ Timing Tool
Pushes into the timing hole and lightly brushing
the flywheel to keep oil in and make the timing
mark more visible. Sold each. . . . . . . . . . . . .$10.99
20895 Fits all Big Twins
JIMS® Tool Board for Twin Cam 88® Models
Perfect for the busy shop. Holds 12 of the most commonly used tools on a
shadowed board. Includes hangers and baskets. . . . . . . . . . . . . . . . . . . .$269.60
20851 Tools not included
General
Crankcase Bearing Driver Set
These 2-piece machined steel drivers are used
with our CC# 400542 or similar driver handle to
remove and install sprocket shaft outer bearing
race in crankcase. Fits all Big Twins from 1969
thru 1999 and Sportster® models from 1977 thru
1999.
Driver handle sold separately.
400543 Driver set (includes drivers for Big Twin
and Sportster® models) replaces
OEM 94547-80 . . . . . . . . . . . . . . . . . .$28.99
17
17.76
Transmission Tools
Apparel
Bike Kits
& Trailers
20447
Seats
& Bags
Foot
Controls
JIMS® Trapdoor Puller
Removes trapdoor with gears and
shafts attached. Will not damage
door bearing. . . . . . . . . . . . . . . .$69.99
20835 For 5-speed Big Twin
transmissions from
1980 to present
JIMS® Trapdoor Bearing
Remover and Installer
Hand
Controls
Removes and replaces transmission
door bearings. Can also be used to
remove the transmission door
from the case. (Door bearings must
be replaced when tool is used to
pull door off case). . . . . . . . .$131.99
20834 For 5-speed Big Twin
transmissions from 1980
to present
JIMS® Main Drive Gear
Bearing Installer
20830
Installs both bearings and seal on
the clutch side of the transmission.
1980 thru 1990 . . . . .$42.99
22338 Fits 5-speed Big Twin
models from 1991 to
present, and Sportster®
and Buell® models from
1991 thru 2003 . . . . .$42.99
Lighting
Electrical
Exhaust
JIMS®
Shifter Fork Gauges
These American-made tools are
ideal for setting and aligning
shifter forks. Fit 4-speed Big Twin
20001 1939-early 1979 . . . . .$87.60
(repl. OEM 96384-39)
20108 Late 1979 thru 1986 .$94.25
(repl. OEM 96385-78A)
Intake
JIMS® 4-Speed
Mainshaft Gear Puller
Removes the clutch starter gear
without damaging the gear
or shaft. . . . . . . . . . . . . . . . . . . .$181.99
20948 For all 4-speed Big Twin
1986 with kick starter
Engine
20832
Gaskets
JIMS® Main Seal Tool for
Big Twin Transmissions
Used to install and remove the
transmission main drive seal in all
4-speed models from 1936 thru
1976. Will also install main seals in
later models when used with the
adaptors listed below. This tool
will push the seal in as flat and
straight as possible to .050"
below housing for a no leak fit.
20447 Complete kit for
1936 thru 1976
4-speed models . . .$177.99
JIMS® Transmission
Stud Installer
Use on all stock aftermarket transmissions that have bottom mounting studs. . . . . . . . . . . . . . . . . . .$35.99
20949 For all 4-speed Big Twins
from 1936 thru 1986 and
5-speed Softail® models
JIMS® Primary
Drive Lock
Black Delrin plastic tool wedges
between the primary chain and
motor sprocket. . . . . . . . . . . . . .$36.95
20823 For all primary drives
JIMS® 5-Speed Main Drive
Gear Tool
Used to remove and install the main
drive gear and it’s bearing without
removing the transmission. . .$210.99
20679 Fits Big Twins from 1980 to
present and Sportster® models from 1991 thru 2003
Optional Driver Adaptors
These adaptors are for use with CC
#20447 Driver Tool when
used on 1980-up transmissions.
20830 Fits most 4-speed
Big Twins from
1982 thru 1986 . . . . .$48.99
20831 Fits late 1980 thru
1981 Big Twins with
2.4" O.D. seal . . . . . .$48.99
20832 Fits most 5-speed
Big Twins from
1980 thru 1984 . . . . .$62.30
20833 Fits 5- and 6-speed
Big Twins from
1985 to present . . . .$62.30
JIMS 5-Speed Main
Bearing Remover
®
Tranny
& Clutch
Removes the bearing straight
without damaging the transmisDriveline
sion case. Can be used without
removing the case from the frame.
20947 For 5-speed Evolution®
Big Twin models . . .$109.99 Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
JIMS® Mainshaft
Sprocket Nut Wrench
Sheetmetal
Extra-long, two-piece design with
inner collar that keeps the wrench
on the nut for safer service work. General
17/8" hex (repl. OEM 94660-37A).
1936 to present . . .$121.50
17.77
Cross
Reference
Transmission & Clutch Tools
Clutch Hub Puller
A tool that belongs in the toolbox of everyone
that likes to turn his own wrenches on Big
Twins. Made in America out of top-quality
tool steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.39
20269 Fits Big Twins from 1936 to present
JIMS® Mainshaft
Bearing Race Tool
Used to remove and install the bearing inner
race on the transmission mainshaft. . . . . .$166.85
20677 Fits Big Twins from 1984 to present
JIMS® Clutch Lock Plate
for Early Big Twins
Locks clutch hub to shell to remove or install
clutch hub nut. Most effective when used with
primary locking bars sold below. . . . . . . . . . .$61.99
20827 Fits Big Twins from 1941 thru 1984
Mainshaft Sprocket
Locknut Wrench
Use this wrench to install or remove the
countershaft sprocket nut. Fits all Big Twin
models from 1936-early 1984. . . . . . . . . . . . .$35.49
20160 Replaces OEM 94660-37A
JIMS® Outer Primary
Starter Bearing Puller
Bushing Tool
For replacing OEMs 35094-31 and 35094-65
bushings (CC #26452). . . . . . . . . . . . . . . . . . . . .$45.55
20003 Complete kit
A time saving tool. The easy way to remove
primary starter bearings. . . . . . . . . . . . . . . . .$119.99
20946 For Big Twin and Sportster® models that
use OEM 9063 bearing (CC #28074)
(except Twin Cam 88® models)
JIMS® Access Cover Puller
Removes the transmission access cover which is a
press-fit on two dowel pins. Fits Sportster®
models from 1954 thru 1985. . . . . . . . . . . . .$38.99
Note: Tool can also be used to remove OEM 35961-52 bearing in 4-speed Big Twin countershaft gears and 4-speed
Sportster® clutch gears.
General
400452
17
20159
Primary Case Tools
JIMS® Primary Locking Bars
To lock primary for service work.
20824 For 4-speed Big Twins and 5-speed
Softail® models . . . . . . . . . . . . . . . . . .$19.70
20825 For 5-speed FXR and FLT models .$19.70
20826 For Sportster® and Buell® models
from 1991 thru 2003 . . . . . . . . . . . . .$19.70
17.78
JIMS® Transmission Stand
Holds 4-speed Big Twin transmission case
securely in a vise for easy assembly. . . . . . .$64.90
20601 Fits all 4-speed Big Twin transmissions
Precise replica of OEM “Kent -Moore” primary
plug tool. Used with standard 3/8” drive ratchet
to install and remove slotted primary plugs on
XL models 1971-1985. Works on plugs with flat
or concave bottoms. Sold each.
20159 Fits the Original Equipment plug fitted
to all Sportster® models from
1971 thru 1985 . . . . . . . . . . . . . . . . . .$13.99
400452 Fits Evolution Sportster® models
1986-1990 . . . . . . . . . . . . . . . . . . . . . . .$13.99
Clutch Tools
Apparel
Bike Kits
& Trailers
Seats
& Bags
20013
Clutch Hub Puller
Clutch Hub Puller
for Rivera Pro Clutch
Quickly attaches to any Pro-Clutch or Primo Belt
Drives diaphragm-spring style clutch hub for
quick and easy removal. . . . . . . . . . . . . . . . . .$48.94
20850 Clutch hub puller
Foot
Controls
Diaphragm Clutch
Spring Compressor
Pulls the clutch hub on
Big Twin and 45" models. Works with 3, 5 or 10
finger clutch hubs. Also pulls the motor sprocket
on Sportster® and Big Twin models, Sportster®
transmission sprockets and the rotor assembly
on Big Twin models from 1970 to present.
20013 Replaces OEM 95960-41A . . . . . . . .$30.99
Releases clutch spring pressure for easier
removal and installation. Fits Sportster® models
from 1984 thru 1990. . . . . . . . . . . . . . . . . . . . .$33.99
20725 Replaces OEM 34761
Hand
Controls
Lighting
Electrical
Exhaust
Clutch Hub Puller for Big Twins
14965
14966
Barnett Diaphragm Clutch
Spring Compressors
Motion Pro® Clutch Spring
Compression Tool
Made for compressing the diaphragm clutch
springs on Big Twins from 1990 thru 1997 and
Sportster® models from 1991 thru 1997.
5008137 Complete kit . . . . . . . . . . . . . . . . . .$77.30
Facilitates the removal and re-installation of
the clutch plates on wet clutch models. Two
different versions are available. . . . . . . . . . .$59.99
14965 Fits all Big Twins from 1990 to present,
and all Sportster® models from 1991
thru 2003 (repl. OEM HD-38515)
14966 Fits all Sportster® models from late 1984
thru 1990 (repl. OEM HD-34761)
Pulls three-finger clutch hubs on all Big Twin
models from 1936-early 1984. Puller also
includes four bolts for use with the puller to
remove the clutch hubs on late-model Big Twins
with diaphragm clutches thru 1990. . . . . . .$62.65
20006 Replaces OEM 95960-52C
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
JIMS® Clutch Puller Tool
24154 Fits 1971-early 1984
Sportster® models . . . . . . . . . . . . . . .$82.99
Wheels,
Tires
& Brakes
Frames
Motion Pro® Clutch Tool
Designed to hold clutch baskets, flywheels,
gears, sprockets, etc. Jaws open to 5 inches
wide. Made of medium carbon steel with hardened jaws. A very useful tool for holding any
kind of mechanical work.
5008008 Sold each . . . . . . . . . . . . . . . . . . . . .$30.10
Forks
& Shocks
Bearing Tool
Installs main drive gear bearing to the proper
depth. Fits all Big Twin 4-speed transmissions
1979 thru 1986. . . . . . . . . . . . . . . . . . . . . . . . . . .$60.95
Sheetmetal
JIMS® Diaphragm
Clutch Spring Compressor Tool
Used to release clutch spring for ease of retainer General
ring removal and installation. Fits Big Twins
from 1990 to present. . . . . . . . . . . . . . . . . . . . .$79.70
17.79
Cross
Reference
Driveline Tools
Transmission Pulley Holder
Holds the drive pulley stationery to tighten pulley retaining
nut without spinning transmission. Works with rear belt
installed or not. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.59
20304 Replaces OEM 41184
Chain and Belt Alignment Tool
The laser light beam makes the running direction of the rear sprocket directly visible on
the belt or chain. Fast and easy control of the belt alignment. Should be in the pocket
of every serious motorcyclist. Get rid of your aluminum bars and get the new laser bike
alignment tool. It easily clips to the front and rear wheel. The line laser will show you
directly any front to rear wheel misalignment. It will show you also the vertical
misalignment on rubber mounted models in a breeze.
60317 Chain/belt alignment tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.95
60318 Bike alignment tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1,395.00
5-Speed Transmission Tool
General
Not available from Harley-Davidson®. This tool allows bearing
plate (trap door) removal without disassembling mainshaft.
Greatly reduces labor time when installing 5-speed kick start
kits or any transmission maintenance when bearing plate
removal is necessary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $55.99
08818 Fits 5-speed models from 1980 to present
17
Chain Rivet/Press Tool Complete Kit
New drive chains use press-on type side-plates on connecting links. The press fit adds
strength to the connecting link and should always be used. This kit consists of rivet tool
set to disassemble the chain, and the specially designed press tool to install it. Made in
USA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$101.09
84184 Fits all 520 to 530 size drive chains (including O-ring)
17.80
Driveline & Wheel Tools
Apparel
Bike Kits
& Trailers
84182
Seats
& Bags
Radial Ball Bearing Remover Set by
Motion Pro®
This set uses a split 3/4" collet design to remove radial ball
bearings on Harley-Davidson models.
640114 Remover set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.50
JIMS® Balancer
Shaft Bearing
Remover
and Installer
This tool will pull the
bearings from the “B”
motor case in one easy
smooth motion, preventing any damage to the
bearing bores. The
installing portion of this
tool is designed to push on
the outer diameter of
bearings preventing any
damage to the bearing or
it’s bore. . . . . . . . . . .$90.20
671016 Use on Twin Cam
88® Softail®
models from
2000 thru 2001
Foot
Controls
20135
Hand
Controls
Gauge-Mounted Air Pump
Simple to operate and extremely accurate, this
air pumps produce pressures of up to 300psi by
delivering .7 cubic inches of air per stroke. Ideal
for setting the pressure on air forks, air shocks
or anti-dive fork components. Permits minute
adjustments by using a ‘let down valve’ and
also features an in-line check valve to insure
a no-leak operation and disconnect. . . . . . .$49.95
20135 0-30 lb. gauge (repl. OEM 34633)
84182 0-300 lb. gauge
Auto Meter
Tire Pressure Gauge
Accurate reading from 0 to 60 psi.
Holds last measurement until
reset button is pressed. Angled
chuck for easy access to all
valve stems. . . . . . . . . . . . . . . .$28.89
45079 Tire gauge
Lighting
Electrical
Exhaust
Intake
Super Tire Tool
Deluxe Spoke Wrench
A top-quality spoke wrench that will fit spoke
nipple sizes from 1 to 6. . . . . . . . . . . . . . . . . . . .$5.69
10342 Sold each
Engine
A deluxe tire iron. 16"-long for
better leverage and quicker, easier
tire changes. Sold each. . . .$18.79
Gaskets
Late Sealed Wheel Bearing Race Remover
and Installer Tool by JIMS®
Tranny
& Clutch
Use to remove and install "new style" sealed wheel bearings
without damaging the wheel.
400394 Fits 2000-up Twin Cam 88® models and all 2000-up
Sportster®, Buell®, and Buell® Blast® models . . . . .$209.99
Driveline
Tire Irons
Designed for easily getting
between tire bead and rim without pinching tubes. . . . . .$5.50 each
19626 Display card of 10
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Three-In-One Truing Stand by K&L Supply
Make the most of your workspace! This tool allows you
to perform the following tasks all at one location, using
one fixture.
• Build and true laced wheels
• Balance spoke and cast wheels
• Check for runout (cranks, fork tubes)
• Requires optional dial gauge (sold separately)
400341 Three in one truing stand . . . . . . . . . . . . . . . . . . . .$439.99
JIMS® Wheel Bearing Race Tools
Collett set used to grip the wheel bearing race
for easier installation and removal.
20727 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$69.99
Driver Handle
Handle for bearing drive tool.
20666 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$54.50
3/8" Sockethead Wrench
Sheetmetal
Special sockethead wrench for the
timing hole plug, or the old 7/16"
brake drum screws.
84187 Sold each . . . . . . . . . . . .$3.79 General
Accessories
400342 Dial gauge for truing stand . . . . . . . . . . . . . . . . . . .$28.19
17.81
Cross
Reference
Chain Tools
E
F
B
F
A
E
Heavy-Duty Chain
Breaker
C
A heavy-duty tool with a heattreated pin and folding handle.
Works on chain sizes 420 thru 530.
20123 Chain breaker . . . . . .$28.49
20124 Replacement tip . . . .$4.44
D
Regina Chain Tools
A
B
C
D
E
F
2495000
2495330
2495204
2495203
2495180
Chain Breaker Type 1 . . . . . . . . . . . . . . . . . . .$54.50
Chain Breaker Type 7 . . . . . . . . . . . . . . . . . .$105.50
Pliers for Spring Clip Links . . . . . . . . . . . . . . .$64.50
Pliers for O-Ring Links . . . . . . . . . . . . . . . . . . .$64.50
Professional Tools for
Assembling/Riveting . . . . . . . . . . . . . . . . . . .$607.95
2495181 Tools for Assembling/Riveting . . . . . . . . . .$382.50
Motion Pro® Jumbo Chain Tool Kit
• Ultra heavy duty tool for breaking and riveting roller chain
• Fits all 520, 525, 530 and 630 standard or
O-ring chains, plus industrial chains from
#50-#80
• Pushes the pin completely through the chain
link and rivets the same size chain with the
included rivet adapter
• Tool body may be mounted to a work bench
for production work, held in a vise or by the
handle
• When bolted to a surface, an air or electric
wrench may be used to break chain
• Body bolt requires a 13⁄16" (21mm) wrench
and extractor pin uses a 9⁄16" (14mm) wrench
or socket
5008135 Chain tool . . . . . . . . . . . . . . . . . . .$147.80
5008935 Replacement pin . . . . . . . . . . . . . .$10.70
Motion Pro® Mini Chain
Press Tool
Diamond Chain Breaker
Compression screw employs an extremely durable heat-treated steel tip to press out chain pins. It’s recommended that
side pin heads be ground off flush when-ever possible so
chain bushing will not be damaged. . . . . . . . . . . . . . . . . . . . .$59.94
Tool box size and budget priced
tool for the installation of press-fit
side plates. Very easy to use, and
easily fits into tool kit. Hex key
wrench is included.
5008070 Fits all 520 to 530
chains . . . . . . . . . . . .$25.70
Motion Pro® Quad Stake
Chain Rivet Kit
Motion Pro®
Chain Press Tool
Use in conjunction with the Motion Pro Jumbo
Chain Tool. This rivet kit will quad stake chain,
so it looks like a factory job.
5008142 Complete kit . . . . . . . . . . . . . . . . . .$33.00
General
This tool will press on press fit
side plates on all 520-530 size
drive chain including O–ring types.
5008066 Complete tool . . . . . . . .$55.20
5008067 Press kit only . . . . . . . . . .$20.30
17
Motion Pro® Chain Breaker Tool
A tough tool designed for shop use, also makes
a perfect tool kit item. Properly used, the tool
will break hundreds of chain links without failure. Pushes chain link pin completely through
link. Handle folds to fit small tool pouch.
Replaceable pin is heat treated and hardened
for long life. For shop use, tool may be used
with an air or electric impact wrench.
5008001 Fits all 420 to 630 chains . . . . . . .$27.10
5008002 Replacement pin . . . . . . . . . . . . . . .$4.10
17.82
Motion Pro®
Masterlink Pliers
Motion Pro®
Chain Breaker Tool
Heavy duty chain breaker for
use on up to 530 chain.
8641649 Sold each . . . . . . . . . . . . . . . . . . . . .$17.50
• Simplifies installation and removal of cliptype masterlinks
• One tip is shorter and notched to be placed
on the pin while the other is longer to easily
push the clip
5008230 Sold each . . . . . . . . . . . . . . . . . . . . .$27.90
Wheel & Chassis Tools
Apparel
Bike Kits
& Trailers
5451001
5451003
Digital Tire Pressure Gauges
Pinpoint accuracy and large easy-to-read LCD
digital readout make these two of the best tire
pressure gauges available. Both units feature
1-100 psi pressure range with resolution to
0.5 psi and accuracy to +/- 1.0%.
5451001 Pocket gauge. Great for saddlebag
or tool roll . . . . . . . . . . . . . . . . . . . .$15.99
5451003 Performance gauge. Professional
series with air bleed . . . . . . . . . . .$31.49
Seats
& Bags
Motion Pro®
Maxi-Ject PRO
Brake Bleeder
Specifically-designed for complex hydraulic systems. Built with the workmanship of a precision
firearm, the Maxi-Ject PRO™ is in a class by itself
with precision machined steel plunger assembly,
die-cast aluminum handle and body, shielded
barrel, O-ringed steel nozzle with screw-on support collar, and injection molded check valves.
Full-range adjustable metering allows fine-tuning for special applications. The Maxi-Ject PRO™
can develop 150 psi of injection pressure with a
15ml injection dosage. The Maxi-Ject PRO™ modular construction interfaces with its various
adapters and accessories. Comes with its own
carrying case and the universal CAPADAP™ cap
adapter.
5008215 Complete kit . . . . . . . . . . . . . . . . .$390.95
Foot
Controls
Hand
Controls
Lighting
JIMS® Cleveblock Spreader
Used to install the swingarm in 5-speed
rubber mount frames. When cleveblocks are
Electrical
replaced they need to be positioned to install
in the rear of the transmission. This tool spreads
the cleveblocks permitting installation of the
swingarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.99
20951 For Big Twin 5-speed rubbermount mod- Exhaust
els from 1980 thru 1994
Motion Pro®
V-12 Injector™ Brake Bleeder
Intake
Designed to economically perform RFI™ (Reverse
Fluid Injection), vacuum/pressure bleeding and
master cylinder bench bleeding. The V-12 can
develop 120 psi while maintaining a comfortable hand force. The handle and body are made
of high-strength Zytel (glass-reinforced nylon)
which imparts metal-like strength while remaining lightweight. Comes with it’s own carrying
case and the universal CAPADAP™ cap adapter.
5008214 Complete kit . . . . . . . . . . . . . . . . .$184.95
Engine
Gaskets
Tranny
& Clutch
EZE Brake Bleeder
This unit was developed to bleed master cylinders, brake cylinders or hydraulic clutch cylinders. It does not require any special tools or clips
and eliminates that hassle with check valves.
84180 EZE brake bleeder
Motion Pro®
Hydraulic Brake Bleeder
Aids in bleeding and servicing of hydraulic
brakes. The unique check valve allows fluid
and air to escape, while preventing air from
re-entering the system. Instructions and hose
included.
5008143 Sold each . . . . . . . . . . . . . . . . . . . . .$18.70
JIMS® Steering Head Bearing
Race Installer
Driveline
Used to install steering head races, stock and
custom as well as install cups in the frame. This
tool pulls the races and cups in straight and true
without damage. . . . . . . . . . . . . . . . . . . . . . . . . .$48.99
20950 For Big Twin models from 1936
to present
Wheels,
Tires
& Brakes
Frames
JIMS® Swingarm
Bushing Assembly Tool
Used to remove and replace
swingarm cleveblocks, CC #38018
(OEM 47556-81). Cleveblocks are
silicone-filled bushings that can be
damaged if not installed properly.
Tool applies pressure evenly to the
bushings outer sleeve preventing
damage. Can be used with or without a press. Includes lube. . .$152.99
20952 For FXR and Touring models from 1980 to present,
as well as all aftermarket
rubber mount frames
Forks
& Shocks
Fork Cap Socket
Swingarm Bearing Tool
Specially-designed 13/8" hex socket
is low-profile for use in the limited
space under the handlebars when
tightening fork caps. Requires a
1/2"-drive ratchet . . . . . . . . . .$19.84
20902 For most models from
1973 to present
Easily installs or removes swingarm
spherical bearings on all Softail®
models from 1984 to present.
Also works on front fender pivot
General
bearings on FLSTS models from
1997 thru 2003. . . . . . . . . . . . .$49.89
20900 Swingarm bearing tool
17.83
Sheetmetal
Cross
Reference
Wheel & Chassis Tools
Shock Wrench for Softail® Models
Fits Softail® models from 1989 thru 1999. . .$6.99
400517 Replaces OEM 94455-89
Shock Adjusting Tool
Used to adjust the spring preload on rear
shocks. For all Sportster® models from 1967 thru
1974, all Sportster® and FXR models from 1982
thru 2003 as well as all 4-speed FL and FX models from 1958 thru 1986. . . . . . . . . . . . . . . . . .$13.99
20121 Replaces OEM 94700-52B
Shock Spanner Wrench
Adjustable Split Fork Seal Driver
Set by K&L Supply
Replace fork seals without removing the inner
fork tube from the T-clamp.
Set includes: one Split Seal Driver and three Seal
Guides 35mm, 39mm, 41mm. . . . . . . . . . . .$171.29
400349 Fork Seal Installer. Use on 35mm,
39mm, and 41mm fork tubes
Fits FXR and ‘Touring’ models from 1980
to present and Sportster® models from
1975 thru 1992. . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.99
400513 Replaces OEM 94820-75
Shock Absorber Pre-Load Wrench
by Progressive Suspension
• Specially designed spanner wrench for use in
adjusting shock absorbers on Softail® models
• Works left or right. Uses 3/8" socket drive
• Specially designed to fit into tight spaces
• Use to loosen and tighten lock nut and to
adjust spring pre-load
400310 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.95
20138
20137
Safety Wire Tool
General
Most commonly used to lockwire the nuts on
the inner primary cover, but can come in handy
for dozens of uses in emergency situations.
The kit includes the tool and 25-feet of .032"
stainless steel safety wire.
20137 Safety wire kit . . . . . . . . . . . . . . . . . . .$17.09
20138 Shop supply can of wire
(approx. 360 ft.) . . . . . . . . . . . . . . . . .$23.20
640112
640113
Trock Fork Spring Compressor
This tool is used when pre-loading the fork
springs. Heavy steel construction and an easy
to operate squeeze handle ratchet makes
compressing the springs quick and easy. The
non-marring clamping plate will help prevent
damage to chrome surfaces. It has a handy
thumb release, so it’s easy to install and remove.
The accompanying wrench fits the top nuts on
35mm, 39mm, and 41mm giving it universal
applications.
400309 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$129.99
Fork Tube Seal Installer
by Kastar
Used for installation on all Harley-Davidson
35mm, 39mm, and 41mm fork tube seals. A split
sleeve is placed over the fork tube. A puller is
placed onto the shock and sleeve. A large
threaded rod is then turned to pull the seal into
place without banging or disassembling the
entire fork.
• Allows procedure to be completed without
disassembly of the entire fork, which saves a
great deal of time.
• Pulls seal into place using a threaded rod
preventing damage to the seals, replacing
the conventional method of using a hammer
to install the seals.
• Tool is supplied with several sleeves so
application coverage is broader. . . .$379.99
400714 Kastar fork tube seal installer
JIMS® Fork Nut Socket
Stop rounding off the flats of your top fork tube
plugs with this specialty socket tool. . . . . . .$44.85
20455 Fits all Wide Glide® front forks from
1948 to present
Fork Compressor Kits by Motion Pro®
Tired of wrestling with the installation of the fork cap because of the spring
pre-load? Wrestle no more with these Fork Compressor Kits.
• Designed to install fork caps on forks with a large amount of spring pre-load
• Will work on most 39mm and 41mm Harley-Davidson® fork applications
• Available in 39mm kit, 41mm kit or a combined kit for 39mm and 41mm together
640111 41mm Compressor kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43.60
640112 39mm Compressor kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.30
640113 Combined Compressor kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.10
17
17.84
Engine & Transmission Stands
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
JIMS® Fork Seal Installers
The perfect tool for installing fork seals, dust
seals and chrome caps. Lightly grease to protect
chrome on fork tubes.
20450 Slide tool with Delrin plastic cap
for 39mm forks . . . . . . . . . . . . . . . . . .$94.99
20451 Slide tool only for 35mm forks . . .$51.99
Engine Stand
Hand
Great for repairing motors out of the bike or for Controls
building customs. May be bolted to a bench for
added stability. . . . . . . . . . . . . . . . . . . . . . . . . . .$69.29
20102 For Big Twins from 1936 thru 1999
(except Twin Cam 88® models)
Lighting
Bench Top Cabinet
Electrical
American-made sand/bead blast cabinet features all-steel welded construction with Lexan®
window and lined gloves for comfort. Dependable ALCF gun with pickup tube and breather
vent system. UPS shippable. 30" W x 20" L x 27"
H. Manufacturer’s two year warranty. . . .$579.99
400598 Metal Cabinet
Exhaust
Intake
Vise Soft Jaws
Quality set of soft aluminum jaws for any size
vise. Here is the way to protect those special
parts from being marked or damaged by regular
vise jaws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99
Engine
24341 Sold in pairs
Gaskets
JIMS Engine Stand
for Twin Cam 88® Big Twins
®
This steel, black powder-coated stand
will simplify your engine repair. . . . . . . . . . .$66.15
23302 Fits Twin Cam 88® engines from 1999
to present (except Softail® engines)
Tranny
& Clutch
Driveline
JIMS® Engine Stand for Big Twins
Perfect for engine repair. This bench-mounted
stand works with all Big Twin engine cases from
1936 thru 1999. . . . . . . . . . . . . . . . . . . . . . . . . . .$68.75
20105 Fits Big Twins
Wheels,
Tires
& Brakes
JIMS® 5-Speed
Transmission Stand
Accepts 5-speed FXR 1982-1994 and FLT 19891992 rubber mount transmissions. Rugged steel
construction with black finish. . . . . . . . . . . . .$63.45
400565
JIMS® Engine Stand for Sportster® Models
Big Twin Engine Case Cradle
A great mechanic’s helper. This cradle has the
ability to spin 360 degrees and tilt 45 degrees.
Locking spring pins hold engine case securely
in place. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$142.99
20896 Fits Big Twin models from 1936 thru
1999 (except Twin Cam 88® models)
Top-quality steel bench stand for Sportster® crankcases from
1957 thru 1985. Makes engine overhauls a breeze. . . . . . .$79.15
20119 Engine stand
Frames
Forks
& Shocks
Sheetmetal
General
17.85
Cross
Reference
Tools & Roller Bearings
Fit Sportster® and KH models from
1954-early 1986 and Big Twins from
1973 thru 1986 (34 used).
Part #
49025
49026
49027
49028
49029
49030
49031
49032
49033
Size
.1875 x .294 Std.
+.0002
+.0004
+.0006
+.0008
+.001
+.002
+.003
–.0002
OEM #
9441A . . . . . .$18.49
9442A . . . . . .$18.49
9443A . . . . . .$18.49
9444A . . . . . .$18.49
9445A . . . . . .$18.49
9446A . . . . . .$18.49
9418 . . . . . . .$18.49
n/a . . . . . . . . .$18.49
9450A . . . . . .$18.49
Long Rod Rollers
Fit Big Twin models from 1973
thru 1986 (17 used).
Part #
Engine and Transmission Rollers
External Lock Ring Pliers
The right way to install and remove snap rings.
Jaws are scored on the outside to hold snap ring
securely. A new snap ring is required when the
old is removed. . . . . . . . . . . . . . . . . . . . . . . . . . .$36.99
20836 External lock snap ring pliers
A wide selection of American-made rollers for
the engine and transmission of most models
from 1930 thru 1986. Sold in resealable bags
which are treated to prevent corrosion and are
clearly marked with their size and OEM number.
Bags of 100.
Transmission Rollers for Sportster® Models
Fit the mainshaft on Sportster® and K models
from 1952-early 1984 (23 used).
Part #
Size
49061 .1562 x .615 Std.
49062 +.0004
49063 +.0008
OEM #
9095 . . . . . . .$24.99
9096 . . . . . . .$24.99
9097 . . . . . . .$24.99
Transmission Rollers for Big Twin Models
Fit 1936-early 1977 OHV Big Twin mainshaft
(44 used), 1936-early 1976 OHV Big Twin
countershaft (44 used).
Part #
49064
49065
49066
49067
Size
.125 x .615 Std.
+.0004
+.0008
+.001
OEM #
9084 . . . . . . .$15.49
9085 . . . . . . .$15.49
9086 . . . . . . .$15.49
n/a . . . . . . . . .$15.49
Short Rod Rollers
Fit 1952 K models and OHV Big Twins from 1951
thru 1972 (36 used).
JIMS® Oil Pump Seal
and Snap Ring Installers
Install oil seal below gear surface for a no-leak
fit. Snap ring installer is tapered to easily install
over oil pump shaft without undue stretching or
distortion of snap ring.
20456 Seal installer for aluminum
oil pumps . . . . . . . . . . . . . . . . . . . . . . .$64.80
20457 Snap ring installer (includes
ring expander and sleeve) . . . . . . . .$46.00
Part #
49000
49001
49002
49005
Size
.1875 x .329 Std.
+.0002
+.0004
+.001
OEM #
9101A . . . . . .$18.49
9102A . . . . . .$18.49
9103A . . . . . .$18.49
9106A . . . . . .$18.49
49016
49017
49018
49019
49020
49021
49022
Size
.1875 x .585 Std.
+.0002
+.0004
+.0006
+.0008
+.001
+.002
OEM #
9186 . . . . . . .$19.99
9180 . . . . . . .$19.99
9181 . . . . . . .$19.99
9182 . . . . . . .$19.99
9183 . . . . . . .$19.99
9184 . . . . . . .$19.99
n/a . . . . . . . . .$19.99
Crankcase Rollers for Big Twin Models
Fit the left case of OHV Big Twins from 1930 thru
1957 (24 used), and the right case from 1958
thru 1986 (28 used). Also fit wheels with loose
roller bearings.
Part #
49048
49049
49050
49051
49052
49053
49054
Size
.250 x .490 Std.
+.0002
+.0004
+.0006
+.0008
+.001
+.002
OEM #
9220A . . . . . .$22.99
9221A . . . . . .$22.99
9222A . . . . . .$22.99
9223A . . . . . .$22.99
9224A . . . . . .$22.99
9225A . . . . . .$22.99
n/a . . . . . . . . .$22.99
Right Side Crankcase Rollers
Fit 1957 thru 1976 Sportster® models and 1955
thru 1957 OHV Big Twins (13 used).
Part #
49042
49043
49044
49045
49046
49047
Size
.1875 x .800 Std.
+.0002
+.0004
+.0006
+.0008
+.001
OEM #
9421
9422
9423
9424
9425
9426
. . . . . . .$21.49
. . . . . . .$21.49
. . . . . . .$21.49
. . . . . . .$21.49
. . . . . . .$21.49
. . . . . . .$21.49
General
Flashlight Magnifier
• Flashlight and magnifying glass in one
• Perfect for reading spark plugs, jet sizes, and many
other uses
• Durable plastic head with chromed steel body . . . . .$25.79
20155 Flashlight magnifier
Oil Pump Check Valve Reseater
Refinishes ball seat to provide a positive seal.
1968 thru 1999 . . . . . . . . . . . . . . . . .$139.99
17
17.86
Snap Ring Kits
Retaining Ring Kits for Big Twin
and Sportster® Models
Apparel
Bike Kits
& Trailers
These kits of commonly used retaining rings are packaged in KAL-REZ
polycarbonate trays with snap-lock lids that prevent the contents from
spilling out, even if the trays are turned upside down. The inside lid of
each kit has a handy reference chart showing location, Custom Chrome®
and OEM part numbers for easy reordering when needed. All of the individual rings are listed to the right, and are available in replacement shop
supply 10-packs.
Seats
& Bags
Retaining Ring Kit for 4-speed Big Twin Transmission
This 140-piece kit contains eight commonly used transmission retaining
rings and six miscellaneous retaining rings used on shifter and clutch
applications.
Includes part numbers: 19403, 49108, 49109, 49110, 12468, 49112, 49113,
49114, 49115, 49116, 49127, 56319, 56301, 56303, 56302
(See chart below for product information)
49101 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$73.99
Foot
Controls
Hand
Controls
Retaining Ring Kit for Big Twin Engine
and Miscellaneous Applications
This 120-piece kit contains ten commonly used engine retaining rings
and two miscellaneous retaining rings used on many clutch, shifter and
control lever applications.
Includes part numbers: 54000, 49106, 49107, 49112, 49119 (Qty 2), 49120,
49122, 49123, 49124, 54250, 12468
(See chart below for product information)
49100 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.99
Lighting
Electrical
Exhaust
Replacement Snap Rings listed below in OEM number order (packs of 10)
49103 Clutch release finger shaft. Fits 1970 thru 1986 Big Twins (repl. OEM 11000) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.19
54000 Oil pump. Fits Big Twins from 1957-early 1962 as well as Sportster® models from 1972 thru 1976 and 1991 thru 2003
(repl. OEM 11002). Also fits miscellaneous shifter and clutch parts on models from 1972 to present (repl. OEM 11143) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.19
49105 Clutch adjusting screw. Fits 1971-early 1984 Sportster® models (repl. OEM 11005) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.49
49106 Pinion shaft bearing. Fits 1958 thru 1986 Big Twins (repl. OEM 11007) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99
49107 Oil filter. Fits late 1966-early 1982 Big Twins and late 1966 thru 1978 XLH models (repl. OEM 11012) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.99
49108 Shifter linkage. Fits Big Twins from 1974 to present (repl. OEM 11016) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.49
49109 Clutch release lever stud. Fits 1980 thru 1986 Big Twins and the detent plate on Sportster® models from 1991 thru 2003
(repl. OEM 11019) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.49
49110 End housing bearing. Fits Big Twins from 1980 to present (repl. OEM 11020) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.49
12468 Fits miscellaneous kickstart and shift levers on 1965 thru 1986 models (repl. OEM 11031) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.49
49112 Fits miscellaneous shift, clutch and control levers on 1972 thru 1988 models (repl. OEM 11036) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.49
49113 Foot clutch control rod end. Fits 1965 thru 1978 Big Twins (repl. OEM 11037) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2.49
49114 Transmission gear. Fits Big Twins from 1980 to present and Sportster® models from 1991 thru 2003 (repl. OEM 11067) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.99
49115 Shifter cam support. Fits Big Twins from 1980 to present (repl. OEM 11083) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
49116 Clutch throwout bearing. Fits Big Twins from late 1975 to present (repl. OEM 11096) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.49
49118 Piston pin. Fits 1973-early 1977 Big Twins, 1952-late 1977 Sportster® and K models and Premium® pistons (repl. OEM 22582-52) . . . . . . . . . . . . . . . . . . . .$4.99
49119 Piston pin. Fits late 1977-early 1983 Big Twins, late 1977-early 1985 Sportster® models and C.C. Rider® pistons (repl. OEM 22588-78) . . . . . . . . . . . . . . . .$4.49
49120 Piston pin. Fits most models from late 1983 to present (repl. OEM 22589-83) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.00
49121 Sprocket shaft bearing. Fits 1952 thru 1976 Sportster® and K models (repl. OEM 24701-52) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.89
49122 Pinion shaft bearing. Fits 1954 thru 1976 Sportster® and K models and 1955 thru 1957 Big Twins (repl. OEM 24701-54) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.39
49123 Sprocket/pinion bearing. Fits 1940 thru 1954 Big Twins (repl. OEM 24702-40) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
49124 Idler gear stud. Fits 1932 thru 1957 OHV Big Twins (repl. OEM 25810-15) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99
54250 Oil pump drive shaft. Fits OHV Big Twins (except Twin Cam 88® models) from 1936 thru 1999 (repl. OEM 26348-36) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.00
49126 Oil pump gear shaft. Fits Sportster® models from 1977 thru 1990 (repl. OEM 26497-75) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$3.49
49127 Shifter cam. Fits late 1979 thru 1986 Big Twins and 1952 thru 1990 Sportster® and K models (repl. OEM 34040-52) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99
56355 Transmission mainshaft ball bearing. Fits 1952-early 1984 Sportster® and K models (repl. OEM 35112-52) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.54
56337 Transmission roller bearing. Fits 1952-early 1984 Sportster® and K models (repl. OEM 35113-52) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.84
56319 Drive gear bearing race. Fits 1937-early 1977 Big Twins (repl. OEM 35129-36) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.24
56301 Mainshaft 2nd/3rd gear. Fits 1937 thru 1986 Big Twins (repl. OEM 35337-36) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.39
56320 Mainshaft 3rd gear. Fits 1956 thru 1990 Sportster® and K models (repl. OEM 35337-56) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.84
56303 Low and second gear. Fits 1940 thru 1986 Big Twins (repl. OEM 35810-36) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99
56302 Countershaft bearing. Fits 1937-early 1976 Big Twins (repl. OEM 35920-36) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.39
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
17.87
17.87
Cross
Reference
Specialized Tools & Fasteners
JIMS® Balancer Shaft
Alignment Tool
JIMS® Case Boring Tool
This tool takes all the guess work out of boring
a Twin Cam 88® motor case to accept Jims®
4"-bore cylinders, for both 113" and 116" flywheel cylinder kits. It is designed to be used in a
heavy duty 15" drill press. Simply bolt your case
into the angle swivel base that is mounted to
your drill press, then install the case boring fixture (utilizing cylinder stud holes), set the RPM
and depth of bore...and start boring! . . .$886.10
671020 Use on all Twin Cam 88® cases
This tool is a must-have for maintaining a long
life of your balancer’s drive chains and bearings.
It takes the guess work out of setting up your
sprocket and chain alignment on a Twin Cam 88®
Softail® engine and checks chain alignment
between balancers and crankshaft. . . . . .$192.95
671014 Use on Twin Cam 88® Softail® models
Well-Nuts® Blind Fasteners
These fasteners are used in a number of applications which include mounting the side covers
and oil tank on FXR models. . . . . . . . . . . . . .$13.99
16051 Replaces OEM 8099 (pack of 10)
JIMS® Piston Support Plate
JIMS® Brake Caliper Piston Remover
This tool will support the brake caliper pistons
for removal by holding the pistons square to
their bores. This prevents any damage to the
pistons and the piston bores so seals and wipers
can be replaced. . . . . . . . . . . . . . . . . . . . . . . . . .$47.50
671015 Use on all Harley-Davidson® 4-piston
calipers from 2000 to present
JIMS® Balancer Shaft
Retention Pins
Use this tool to secure the engine balancers
on Twin Cam 88® “B” engines when servicing
the flywheel assembly. This tool locks into the
balancer’s sprocket pin holes to prevent the
balancer from turning out of sync with the
flywheel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.80
671017 Use on Twin Cam 88® Softail® models
Using this tool will give you peace of mind when
installing your rings and cylinders by providing a
non-marring flat support to push the bottom of
the piston agents as you install the rings and
cylinder over the piston. . . . . . . . . . . . . . . . . .$49.85
671018 Use on all Harley-Davidson® engines
General
35636
17
35637
35638
Transmission Case
Bottom Studs
16586
Chrome Heim Joints
These flawlessly-plated units can serve a variety
of uses, particularly when fabricating custom
shift and brake linkages. The 5/16" heim joints
are available with right and left hand threads
to make links that are adjustable without disassembly. Made in the U.S.A. Sold each. . . .$28.59
19297 1/4" x 1/4-28 female
19298 5/16" x 5/16-24 male
19299 5/16" x 5/16-24 female
19302 5/16" x 5/16-24 male (left hand thread)
19301 3/8" x 3/8-24 female
17.88
Polished Stainless Steel
Heim Joint
Standard and two oversized sizes for Big Twin
models from 1936 thru 1983 (parkerized finish).
Sold in sets of 4.
35636 3/8"-16 x 3/8"-24 . . . . . . . . . . . . . . . . .$14.29
35637 7/16"-14 x 3/8"-24 . . . . . . . . . . . . . . . .$14.89
35638 1/2"-13 x 3/8"-24 . . . . . . . . . . . . . . . . .$17.69
Aircraft-quality rod ends ensure durability and
smooth shifting. Replace most heim joints with
5/16"-24 right hand threads. Sold each.
16586 Stainless steel . . . . . . . . . . . . . . . . . . . .$27.44
16327 Chrome . . . . . . . . . . . . . . . . . . . . . . . . .$24.49
Fastener Covers
Apparel
Flame
Bike Kits
& Trailers
Seats
& Bags
Eagle
Foot
Controls
640186
Starter Bolt Covers
640184
Cross
Skull
Chrome-plated plastic starter bolt cover adds a
custom detail. Includes cover, knurled starter
bolt and silicon adhesive. For Big Twins from
1989 to present. . . . . . . . . . . . . . . . . . . . . . . . . . .$6.89
66024 Dome design
66046 Skull Design
Hand
Controls
Lighting
Electrical
Chrome Bolt Caps for Hex Heads, and Socketheads,
Superior Bolt Caps available with one of a kind internal clip that will prevent caps from
flying off your bike. No more tape, adhesive or set screw (except for Headbolt cover kit has set screw)
to mess with. Just clip on and go! Skull, Flame, Maltese Cross, and Eagle designs available in 1/4",
5/16", 3/8" head bolt sizes. Sold in packs of 4.
Hex Heads
Exhaust
Socketheads
Part #
Size
Qty.
640160
640161
640162
640163
640164
640165
640166
640167
640168
640169
640170
640171
1/4"
5/16"
3/8"
1/4"
5/16"
3/8"
1/4"
5/16"
3/8"
1/4"
5/16"
3/8"
4
4
4
4
4
4
4
4
4
4
4
4
Design
Part #
Size
Eagle . . . . . . . .$26.74
Eagle . . . . . . . .$27.69
Eagle . . . . . . . .$28.44
Flame . . . . . . . .$26.74
Flame . . . . . . . .$27.69
Flame . . . . . . . .$28.44
Skull . . . . . . . . .$26.74
Skull . . . . . . . . .$27.69
Skull . . . . . . . . .$28.44
Cross . . . . . . . .$26.74
Cross . . . . . . . .$27.69
Cross . . . . . . . .$28.44
640172
640173
640174
640175
640176
640177
640178
640179
640180
640181
640182
640183
1/4"
5/16"
3/8"
1/4"
5/16"
3/8"
1/4"
5/16"
3/8"
1/4"
5/16"
3/8"
Qty.
4
4
4
4
4
4
4
4
4
4
4
4
Design
Eagle . . . . . . . .$26.74
Eagle . . . . . . . .$27.69
Eagle . . . . . . . .$28.44
Flame . . . . . . . .$26.74
Flame . . . . . . . .$27.69
Flame . . . . . . . .$28.44
Skull . . . . . . . . .$26.74
Skull . . . . . . . . .$27.69
Skull . . . . . . . . .$28.44
Cross . . . . . . . .$26.74
Cross . . . . . . . .$27.69
Cross . . . . . . . .$28.44
Intake
Engine
Dome Lifter
Block Bolt Covers
Don‘t ignore the lifter blocks when going for
the full custom look. Set of eight covers install
in seconds with included silicon adhesive.
66004 Fits Big Twins from late
1976 thru 1999 . . . . . . . . . . . . . . . . . .$15.39
Gaskets
Tranny
& Clutch
Chrome Bolt Cover Kits with Smooth Finish
1/4" Sockethead Cap Screw Cover
640184 10 pack . . . . . . . . . . . . . . . . . . . . . . . . . .$42.44
Twin Cam 88® Rocker Box Covers
640185 4 pack . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.29
Driveline
12 Point Caliper Bolt Covers
640186 4 pack . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.74
Wheels,
Tires
& Brakes
Head Bolt Covers
640187 4 pack . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.34
Frames
Forks
& Shocks
Sheetmetal
General
17.89
Cross
Reference
Fastener Covers
Pike Nuts by Colony
Chrome plated steel, packs of10.
Part# Size
501280 #10 - 32 . . . . . . . .$1.60 each
501281 #10 - 24 . . . . . . . .$1.60 each
501282 1/4" - 20 . . . . . . .$1.90 each
501283 1/4" - 24 . . . . . . .$1.90 each
501284 1/4" - 28 . . . . . . .$1.90 each
501285 5/16" - 18 . . . . . .$2.00 each
501286 5/16" - 24 . . . . . .$2.00 each
501287 3/8" - 16 . . . . . . .$2.25 each
501288 3/8" - 24 . . . . . . .$2.25 each
501289 7/16" - 14 . . . . . .$3.88 each
501290 7/16" - 20 . . . . . .$3.88 each
501291 1/2" - 13 . . . . . . .$5.74 each
501292 1/2" - 20 . . . . . . .$5.70 each
Bolt Cap
Mushroom
500452
Chrome Sockethead Screw Plugs
Assortment tray of show chrome metal plugs for
sockethead screws. 303 piece kit includes 100
each plugs for 1/4", 5/16" and 3/8" sockethead
screws, 3 sample bolts for demonstration and a
handy storage tray. Made in the USA.
500452 Screw plug kit . . . . . . . . . . . . . . . . . . . .$97.99
Screw Plug Refills
Sold in poly bags of 100 pieces.
500453 Fits 1/4" screws . . . . . . . . . . . . . . . . . . .$37.99
Chrome Bolt Covers
Finish the look of plain exposed knurled
sockethead bolts with these chrome plated
plastic covers. Available as bolt caps or
mushroom socket head plugs.
Dome Bolt Caps
PART #
66001
66002
66003
66005
66006
66007
66012
66013
66014
SIZE PACKED
1/4"
1/4"
1/4"
5/16"
5/16"
5/16"
3/8"
3/8"
3/8"
20 . . . . . . . . . . . . . . . . . . . . .$20.14
50 . . . . . . . . . . . . . . . . . . . . .$33.29
100 . . . . . . . . . . . . . . . . . . . .$55.49
20 . . . . . . . . . . . . . . . . . . . . .$18.49
50 . . . . . . . . . . . . . . . . . . . . .$38.59
100 . . . . . . . . . . . . . . . . . . . .$56.99
10 . . . . . . . . . . . . . . . . . . . . .$16.79
50 . . . . . . . . . . . . . . . . . . . . .$55.49
100 . . . . . . . . . . . . . . . . . . . .$95.49
Dome Mushroom
PART #
SIZE PACKED
66009 5/16"
66010 5/16"
50 . . . . . . . . . . . . . . . . . . . . .$49.39
100 . . . . . . . . . . . . . . . . . . . .$87.99
Skull Bolt Caps
PART #
66027
66029
66031
66032
66037
66038
Spectre® Chrome Bolt Caps™
Transform standard hardware into eye catching,
show stoppers with these two-piece caps.
Patented nylon retainers are placed over the
head of the bolt, then caps are snapped on to
completely cover the heads of standard bolts.
Sold in packs of 6. . . . . . . . . . . . . . . . . . . . . . . .$13.89
11893 7/16"
11884 1/2"
11889 9/16"
11896 5/8"
SIZE PACKED
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
20 . . . . . . . . . . . . . . . . . . . . .$19.99
100 . . . . . . . . . . . . . . . . . . . .$61.69
50 . . . . . . . . . . . . . . . . . . . . .$53.49
100 . . . . . . . . . . . . . . . . . . . .$70.39
50 . . . . . . . . . . . . . . . . . . . . .$72.99
100 . . . . . . . . . . . . . . . . . . .$114.99
SIZE PACKED
General
66034 5/16"
66035 5/16"
The ideal way to complement the sockethead
screws that fasten most of the gear, transmission
and primary covers to your engine. They’re
simply pressed into place in the head of the
screw, and are available in bulk packs, or an
assortment which contains plugs to fit 1/4",
5/16" and 3/8" sockethead screws.
32350 Complete assortment
(300 pieces) shown . . . . . . . . . . . .$107.99
Individual Sizes
32351 Fit 1/4" screws (pack of 100) . . . .$42.99
32352 Fit 5/16" screws (pack of 100) . . .$42.99
32353 Fit 3/8" screws (pack of 100) . . . .$42.99
32354 Fit 7/16" screws (pack of 100) . . .$42.99
32355 Fit 1/2" holes (pack of 10) . . . . . . .$10.99
32356 Fit 17/32" holes (pack of 10) . . . .$10.99
Skull Mushroom
PART #
Chrome Plugs
for Sockethead Screws
50 . . . . . . . . . . . . . . . . . . . . .$49.29
100 . . . . . . . . . . . . . . . . . . . .$80.99
Fork Cover Set
for Springer Models
Complete the look of your Springer front end.
This chrome steel, 7 piece set includes 2 axle
caps, 4 rocker nuts and stem cap. . . . . . . .$142.99
28919 For FXSTS models from 1988 to present
Chrome Brake Pedal Nut Cover
Hide the ugly nut and washer on floorboard
brake pedals. Chrome-plated cover installs
easily. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
15191 Fits FL Softail® models from 1986
to present
17
17.90
Diamond Engineering Hardware Kits
Apparel
Diamond Engineering Polished Stainless Steel Bolt Kits
All of these bolt kits feature mirror polished stainless steel fasteners that won’t chip,
peel, or rust even in the harshest salt-spray environments.
Custom Transformation Kits
Includes:
• Primary, Inspections & Inner Primary (& Footpeg Mount XL)
• Cam & Points (& Sprocket & Rear Master Cylinder XL)
• Oil Pump or Oil Line Cover, Filter Mount & Sensors (Twin Cam 88® Dyna Glide
and ‘Touring’ models) or Oil Filter Plugs & Sensors (Twin Cam 88® Softail® models)
• Lifter Blocks
• Rocker Box
• Coil & Circuit Breaker Covers (Dyna Glide models)
• Transmission Side Cover
• Oil Filler (FLT)
• Transmission Top Cover
• Handlebar Clamp, Switch Housings & Master Cylinder
• Front Fender Rail or Swingarm Pivot Blocks & Rear Floorboard Brackets (FLT)
• Side Covers (FXR)
Engine Kits
Includes:
• Primary and inspection covers, and inner primary (& Footpeg Mount XL)
• Cam and points covers (& Sprocket & Rear Master Cylinder XL)
• Oil Pump or Oil Line Cover, Filter Mount & Sensors (Dyna Glide & FLT models)
or Oil Filter Plugs & Sensors (Twin Cam 88® Softail® models)
• Rocker boxes and lifter blocks
Part #
Price
Description
502213 $97.99 Polished engine bolt kit for FXR and ‘Touring’ models 1992 thru 1998
502202 $105.99 Polished engine bolt kit for Softail® models from 1992 thru 1999
and Dyna Glide models from 1991 thru 1998
502220 $131.99 Polished engine bolt kit for 1999 Twin Cam 88® ‘Touring’ models
502230 $134.49 Polished engine bolt kit for 1999 Twin Cam 88® Dyna Glide models
502203 $135.99 Polished engine bolt kit for 2000 Twin Cam 88® Softail® models
502244 $109.99 Polished engine bolt kit for Sportster® models from 1991 thru 1999
Individual Kits
Polished Stainless Steel
Part #
Price
Description
502363 $31.49 Primary bolts for all FXR, FLT, FLHT, FLHS and Road King®
models from 1985 thru 1998
502366 $35.49 Primary bolts for Softail® models from 1989 thru 1994
502367 $39.99 Primary bolts for Softail® models from 1995 thru 1999
502368 $37.99 Primary bolts for Twin Cam 88® Dyna Glide models
502369 $32.99 Primary bolts for Twin Cam 88® FLT, FLHT and Road King®
models from 1999 to present
502320 $49.99 Points cover screws for all models from 1970 thru 1999
(box of 24 sets)
502321 $22.99 Cam cover bolt kit for S&S engines
502322 $13.99 Cam and points cover bolt kit for all Big Twins from 1970
thru 1999 (except FXR and Dyna Glide models)
502323 $13.99 Cam and points cover bolt kit for FXR and Dyna Glide
models from 1987-1998
502374 $18.49 Rocker cover bolts for Evolution® models from 1984
thru 1999
502375 $24.99 Rocker cover bolts for Twin Cam 88® models from 1999
to present
502382 $24.99 Transmission side cover bolt kit for Softail® models from
1993 thru 1999, and FXR, FLT, FLHT, FLHS, Road King® and
Dyna Glide models from 1987 thru 1999
502312 $27.99 Sprocket bolt kit for laced wheels from 1987 thru 1994
502330 $22.99 Front brake rotor bolts for Wide Glide® models
from 1984 thru 1999 (12 point)*
502331 $12.49 Front brake rotor bolts 1984-1999 with countersunk holes
502332 $23.99 Rear brake rotor bolts for all models 1992-1999 (12 point)*
502333 $13.99 Rear brake rotor bolts for all models with countersunk
holes 1984-1991(12 point)
$9.49 Front brake rotor nuts for all models 1984-1999
502335
with steel hubs
$9.49 Rear brake rotor nuts (rear) for all models 1984-1999
502336
with steel hubs
502395 $68.99 Motor mount bolt kit for 2000 Twin Cam 88® Softail® models
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
502113
502114
Hand
Part #
502101
502102
502110
502111
502114
502132
Price
$224.99
$224.99
$214.99
$214.99
$249.99
$164.99
Description
Controls
Polished bolt kit for 1992-1995 Softail® models
Polished bolt kit for 1996-1999 Softail® models
Polished bolt kit for 1991-1995 Dyna Glide models
Lighting
Polished bolt kit for 1996-1998 Dyna Glide models
®
Polished bolt kit for 2000 Softail models
Polished bolt kit for 1996-1999 Sportster® models
Electrical
502203
Exhaust
Intake
Part #
Price
Description
502300
$6.49 Air cleaner bolt kit for S&S air cleaner
502376 $148.99 Polished head bolt kit for Evolution® models from 1992
thru 1999
502377 $93.99 Polished head bolt kit for Panhead and Shovelhead models
from 1948 thru 1984
502392 $12.49 Transmission top cover bolt kit for all 5-speed Big Twins
from 1988 thru 1997
502393 $12.49 Transmission top cover bolt kit for all 5-speed Big Twins
from 1998 thru 1999
502351 $13.99 Switch housing bolt kit for all models from 1982 thru 1995
502352 $13.99 Switch housing bolt kit for all models from 1996 thru 1999
502340 $39.99 Fender strut bolts for Softail® models from 1986 thru 1999
(sockethead)
502341 $18.49 Footpeg bolts for all models with male mount pegs
502310 $23.99 Sprocket bolt kit for cast wheels from 1973 thru 1986,
and laced laced wheels from 1995 thru 1999
502313 $23.99 Sprocket bolt kit for cast wheels from 1987 thru 1999
502311 $27.99 Sprocket bolt kit for laced wheels from 1973 thru 1986
502314 $23.99 Sprocket bolt kit for cast and laced wheels on 2000
Softail® and Dyna Glide models
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
* indicates Professional Series
• 12 Point High Strength Kits
• 170,000 PSI (15% Stronger than GR8)
Forks
& Shocks
502352
502323
Sheetmetal
502332
General
17.91
Cross
Reference
Custom Chrome® Hardware Kits
Side Cover Kits for Sportster® Models
Application
Description
1991 thru 2003 XL models
Right side; cam cover, crankcase,
sprocket cover and rear master
cylinder mount
36374 Smooth . . . . . . . . . . . . .$62.99
36373 Knurled . . . . . . . . . . . . .$52.99
Left side; crankcase and inspection
covers and shifter bolt
36376 Smooth . . . . . . . . . . . . .$54.39
36375 Knurled . . . . . . . . . . . . .$43.74
Cam, primary and oil fill check screw
36368 Smooth . . . . . . . . . . . . .$35.89
36333 Knurled . . . . . . . . . . . . .$23.39
Cam, primary, sprocket cover and oil
fill check screw
36369 Smooth . . . . . . . . . . . . .$35.64
25094 Knurled . . . . . . . . . . . . .$22.39
Cam, primary and oil fill check screw
36367 Smooth . . . . . . . . . . . . .$33.39
25093 Knurled . . . . . . . . . . . . .$22.69
Sockethead and flathead screws for
cam, primary and oil fill check screw
25091 Knurled . . . . . . . . . . . . .$47.59
Cam and primary covers
25092 Knurled . . . . . . . . . . . . .$36.89
Cam and primary covers
25090 Knurled . . . . . . . . . . . . .$40.84
1971 thru 1976 Sportster® models
Custom Chrome® Engine and Cover Sets
Chrome-plated components in kits for specific applications by year and
model. Most kits are available in chrome-plated knurled sockethead hardware, or with the head polished smooth before plating. Some kits may contain hex or buttonhead hardware where sockethead hardware is not
appropriate.
Complete Motor Kits for Sportster® Models
Application
Description
Upper and lower front and top center motor mounts, rocker box, primary, inspection, crankcase, shifter,
cam, sprocket cover, rear master
cylinder mount, right side crankcase,
timing hole plug and point cover
36380 Smooth . . . . . . . . . . .$257.29
36379 Knurled . . . . . . . . . . .$225.69
Cam, primary, rocker box, lifter base,
top motor mount, oil filter mount
and point cover
36358 Smooth . . . . . . . . . . . .$96.19
36338 Knurled . . . . . . . . . . . .$71.34
top motor mount, oil filter mount
and point cover
36339 Knurled . . . . . . . . . . . . .$74.34
top motor mount, point/magneto
cover and generator mount
36357 Smooth . . . . . . . . . . . . .$99.99
25088 Knurled . . . . . . . . . . . . .$72.69
top motor mount, generator mount,
sprocket cover and point cover
36356 Smooth . . . . . . . . . . . . .$88.59
25087 Knurled . . . . . . . . . . . . .$63.49
Cam, primary, lifter base, magneto
cover, generator, sprocket cover,
rocker box and top motor mount
25086 Knurled . . . . . . . . . . . . .$87.34
Cam, primary, magneto cover, top
motor mount, lifter base, sprocket
cover, rocker box and generator
mount
25085 Knurled . . . . . . . . . . . . .$88.49
Cam, primary, lifter base, magneto
cover, generator, sprocket cover,
rocker box and top motor mount
25084 Knurled . . . . . . . . . . . . .$88.79
1986 thru 1990 XL Evolution® models
1984 thru 1985 XL alternator models
1977-early 1984 XL models
General
1957 thru 1969 XLCH
1967 thru 1970 XLH and 1970 XLCH
1957 thru 1966 XLH
1967 thru 1970 XLH and 1970 XLCH
with 9-bolt aluminum primary
1957 thru 1969 XLCH with 8-bolt
tin primary
1957 thru 1966 XLCH models
with 3-bolt aluminum primary
Complete Motor Kits for Big Twin Models
Application
Description
1987 thru 1993 Big Twins (except
Softail® and Dyna Glide models)
inner primary, timing plug, motor
mounts and point cover
36351 Smooth . . . . . . . . . . . .$178.94
36341 Knurled . . . . . . . . . . .$153.24
Cam, inner and outer primary covers
point cover, timing plug, rocker box,
lifter base, top motor mount, transmission end cover and transmission
bearing support plate
36353 Smooth . . . . . . . . . . . .$194.84
36352 Knurled . . . . . . . . . . .$172.34
36350 Smooth . . . . . . . . . . . .$138.69
Cam, primary, inner primary, point
cover, timing plug, rocker box, lifter
base, motor mounts, and header
mounts
36344 Knurled . . . . . . . . . . . . .$75.24
36370 Smooth . . . . . . . . . . . .$150.59
Cam, primary and transmission
covers
36346 Knurled . . . . . . . . . . . . .$55.39
Primary cover ONLY
32761 Smooth . . . . . . . . . . . . .$42.84
32760 Knurled . . . . . . . . . . . . .$30.99
Sockethead and buttonhead screws
for cam, primary and transmission
covers
36335 Knurled . . . . . . . . . . . . .$46.46
Cam, primary, chain and clutch
inspection covers
36365 Smooth . . . . . . . . . . . . .$31.99
25083 Knurled . . . . . . . . . . . . .$22.39
Buttonhead and flat head screws for
cam, primary, and chain inspection
covers
25082 Knurled . . . . . . . . . . . . .$43.94
Cam, primary and derby covers
25096 Knurled . . . . . . . . . . . . .$33.59
1989 thru 1993 Softail®
and Dyna Glide models
1987 thru 1988 Softail® models
1985 4-speed Evolution® models
and 1984 thru 1985 Softail® models
1984 thru 1986 5-speed Evolution®
models (except Softail® models)
1989 to present Softail®
1970 thru 1986 FX/FL 4-speed models
1965 thru 1969 Big Twins
1936 thru 1964 Big Twins
17
17.92
Hardware Kits
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Chrome Hardware Sets
These sets dress-up your bike with
top-quality chrome-plated hardware for a big improvement over
stock cadmium-plated or old rusty
hardware. Kits come with smooth
or knurled sockethead hardware
Handlebar Controls
Fit all models from 1982 to present
(master cylinder screws fit 1985 to
present)
32755 Smooth . . . . . . . . . . .$22.89
32754 Knurled . . . . . . . . . . .$16.59
Driver/Passenger
Footpeg Bolts
Fit all Sportster® and Big Twin
models (set of two 3/8"-16 x 11/2"
bolts and nylon-inserted lock nuts)
32764 Smooth . . . . . . . . . . . .$9.59
Riser Bolts
Sets of two riser bolts with hex,
Torx® or 12-point heads.
For Softail® Models from
1984 to Present
A pair of 1/2"-13 x 21/2" bolts
(repl. OEM 3450)
32767 Hex . . . . . . . . . . . . . . .$10.14
32769 Torx® . . . . . . . . . . . . . .$28.89
32771 12-point . . . . . . . . . .$27.89
For FXR and Dyna Glide Models
from 1991 to Present
A pair of 1/2"-13 x 23/4" bolts
(repl. OEM 3471)
32768 Hex . . . . . . . . . . . . . . .$13.19
Chrome Timing Plug
35623 Sockethead style for all models from 1970 to present
(repl. OEM 720) . . . . . . . .$7.94
Colony Acorn Kits
Chrome-plated acorn-style hardware kits
for specific applications.
36157 Cam cover screws for 1957
thru 1970 Sportster® models . . . . .$25.99
36158 Cam cover screws for 1971
thru 1985 Sportster® models . . . . .$22.99
36130 Kickstart cover kit for 4-speed
Big Twins from 1936 thru 1986 . . .$18.24
36131 Primary cover kit for 1971 thru
1976 Sportster® models . . . . . . . . . .$27.49
36132 Primary cover kit for 1977 thru
36133 Sprocket cover kit for 1971 thru
36144 Cylinder base nuts for 1936 thru
1977 Big Twins . . . . . . . . . . . . . . . . . .$15.99
36178 Cylinder base nuts for 1978 thru
1984 Shovelheads . . . . . . . . . . . . . . .$22.99
36147 Generator screws for 1958 thru
1969 Big Twins . . . . . . . . . . . . . . . . . . .$8.89
36160 Generator screws for 1971-early
1984 Sportster® models . . . . . . . . . . .$8.89
36163 Lifter base screws for 1957 thru
1975 Big Twins . . . . . . . . . . . . . . . . . .$21.49
1984 Shovelheads . . . . . . . . . . . . . . .$21.49
36177 Lifter base screws to mount late
lifter blocks to Big Twins with
early engine cases . . . . . . . . . . . . . . .$22.99
36151 Rocker box nuts for 1966 thru
1984 Big Twins . . . . . . . . . . . . . . . . . .$39.49
36161 Rocker box bolts for 1957 thru
36162 Rocker box bolts for 1977 thru
36154 Lower motor mount kit for 4-speed
36155 Top motor mount kit for 4-speed
36164 Motor mount kit for 1957-early
36152 Head bolt kit for Big Twin models
(except Evolution® models) from
1948 thru 1984 . . . . . . . . . . . . . . . . . .$48.49
36156 Transmission plate-to-frame kit
for 4-speed Big Twins from 1936
thru 1986 . . . . . . . . . . . . . . . . . . . . . . .$21.49
72067 Motor case kit for Evolution®
Big Twins 1996 thru 1999 . . . . . . . .$43.99
36312 Timing cover kit for Original Equipment covers on Big Twins from 1936
thru 1969 . . . . . . . . . . . . . . . . . . . . . . .$28.99
72057 Timing cover kit for Evolution®
Hand
Controls
Colony Chrome Hardware Kits
Original Equipment-style replacement hardware kits.
Available chrome-plated.
36074 Slotted lifter base screws with starwashers
for 1936 thru 1953 OHV Big Twins . . . . . . . . . . . .$12.49
36075 Cylinder base nuts for 1936 thru 1978 OHV
Big Twins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.59
36076 Cylinder base nuts for 45" engines and
Sportster® models . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.49
36077 Long oil pump nut for 1936 thru 1967 OHV
Big Twins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
36079 Transmission side cover and clutch arm kit
for all 4-speed Big Twins thru 1986 . . . . . . . . . . . .$12.49
36080 Timing plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.84
36081 Case drain plug for all Big Twins from 1930
thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.79
36082 Transmission filler plug for all 1940 thru 1986
4-speed Big Twins . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.54
72070 Transmission filler/dipstick for Big Twins 1987
to present (repl. OEM 37075-87) . . . . . . . . . . . . . .$16.19
36083 Kicker spring stud . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49
36088 Case kit for 1948 thru 1964 Panheads . . . . . . . . .$40.79
36089 Case kit for 1965 thru 1969 Big Twins . . . . . . . . .$40.79
36090 Case kit for 1970 thru 1978 Shovelheads . . . . . .$40.79
36091 Case kit for 1979 thru 1984 Shovelheads . . . . . .$40.79
72068 Flanged nut and stud case kit for for Evolution®
Big Twins from 1996 thru 1999 . . . . . . . . . . . . . . . .$37.99
36092 Circuit breaker screws for OHV Big Twins
from 1936 thru 1964 . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99
36093 Slotted transmission top cover screws for OHV
Big Twins from 1936 thru 1964 . . . . . . . . . . . . . . . .$16.74
36094 Slotted timing cover screws for OHV Big Twins
from 1936 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . .$14.49
36095 Generator screws for Big Twin models
from 1936 thru 1957 . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
36096 Generator screws for 1958 thru
1969 Big Twins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.89
36097 Slotted tin primary cover screws for Big Twins
from 1936 thru 1964 . . . . . . . . . . . . . . . . . . . . . . . . .$13.49
36100 Upper and lower motor mount kit for Big Twins
from 1936 thru 1969 . . . . . . . . . . . . . . . . . . . . . . . . .$42.49
36078 1/4"-24 nuts and lockwashers (pack of 6) . . . . . . .$5.79
36101 1/4" Flatwashers (pack of 12) . . . . . . . . . . . . . . . . . .$4.99
36102 5/16" Flatwashers (pack of 12) . . . . . . . . . . . . . . . . .$4.99
36103 3/8" Flatwashers (pack of 6) . . . . . . . . . . . . . . . . . . . .$4.99
36104 7/16" Flatwashers (pack of 6) . . . . . . . . . . . . . . . . . .$4.99
Lighting
Electrical
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
17.93
Cross
Reference
Hardware Kits
Chrome Acorn Nuts
Sold on skin-packed display card.
Available in fine, coarse or
metric threads.
PART #
Custom Chrome Engine and Cover Sets
®
These kits contain show-quality chrome-plated components in
kits designed for specific applications by year and model.
Most kits are available in chrome-plated knurled sockethead
hardware, or with the head polished smooth before plating.
Some kits may contain hex or buttonhead hardware where
sockethead hardware is not appropriate. These kits add visual
appeal with functional top-quality, American-made fasteners.
Miscellaneous Kits for Sportster® Models
Application
Fits Sportster® models
from 1991 thru 2003
Fits Sportster® models
from 1991 thru 2003
Description
Rocker box sockethead screw set
36378 Smooth . . . . . . . .$28.79
36377 Knurled . . . . . . . .$24.44
Motor mount sockethead screw
set; front upper and lower and
top center mounts
36372 Smooth . . . . . . .$100.29
36371 Knurled . . . . . . . .$93.29
Miscellaneous Kits for Big Twin Models
Application
Description
Fits 1989-1993
Dyna Glide models
Motor mount set. Sockethead
and hex head screws for top and
bottom motor mounts
36384 Smooth . . . . . . . .$36.79
36383 Knurled . . . . . . . .$34.44
Primary cover set. Sockethead
screws for derby, inspection, inner
and outer primary
36382 Smooth . . . . . . . .$63.09
36381 Knurled . . . . . . . .$57.79
Primary cover set. Sockethead
screws
25079 Knurled . . . . . . . . .$9.99
Derby and chain inspection
cover set
25095 Flat head screws .$13.19
Lifter base set. Sockethead screws
36366 Smooth . . . . . . . . .$17.44
Cam cover set
25080 Buttonhead
. . . . . . . . . . . . . . . .$28.89
screws
Fits 1989-1993 Softail®
Fits 1936-1964
Big Twins
Fits 1936-1964
Big Twins
General
Fits Late 1976-1999
Big Twins
Fits 1936-1964
Big Twins
17
Chrome Axle Adjusters for Softail® Models
Sold in pairs.
35629 Fits all Softail® models from 1993 thru 1999
(repl. OEM 47579-93) . . . . . . . . . . . . . . . . . . . . . . .$10.59
36198 Fits Softail® models from 1986 thru 1992
(repl. OEM 47579-86) . . . . . . . . . . . . . . . . . . . . . . .$11.24
17.94
Colony Chrome Show Bike Kits
Acorn-style kits with all the necessary hardware
to transform a stock engine into a classic.
36173 Fits Sportster® models from
1977 thru 1985 . . . . . . . . . . . . . . . . .$242.99
36174 Fits Panheads from 1958
thru 1965 . . . . . . . . . . . . . . . . . . . . . . .$274.99
36262 Fits Shovelheads from 1966
thru 1969 . . . . . . . . . . . . . . . . . . . . . . .$281.99
thru 1975 . . . . . . . . . . . . . . . . . . . . . . .$274.99
thru 1977 . . . . . . . . . . . . . . . . . . . . . . .$274.99
thru 1984 . . . . . . . . . . . . . . . . . . . . . . .$284.99
36330 Fits Shovelhead FLT and FLHT
models from 1980 thru 1983 . . . .$296.99
36332 Fits 5-speed Evolution® Big Twin
models from 1984 thru 1986 . . . .$199.99
14429
14427
14401
14403
14405
14407
14409
14411
14413
14415
14417
14419
14421
14423
14425
SIZE
PACKED
10-32
10-24
1/4"-20
1/4"-28
5/16"-18
5/16"-24
3/8"-16
3/8"-24
7/16"-14
7/16"-20
1/2"-13
1/2"-20
6mm
8mm
10mm
5
5
5
5
4
4
3
3
2
2
1
1
5
4
3
. . . .$7.64
. . . .$7.64
. . . .$7.64
. . . .$7.64
. . . .$6.36
. . . .$6.36
. . . .$5.99
. . . .$5.99
. . . .$5.99
. . . .$5.99
. . . .$5.99
. . . .$5.99
. . . .$9.09
. . . .$8.29
. . . .$8.29
Krommets
Show-chromed studded Krommets.
Long-popular, classic dress-up
hardware for chrome dresser panels and accessories. . . . . . .$2.60 each
12291 Sold on a display card
of 10 pairs
Chrome Rear Fender Strut
Mounting Kits by Colony
Include all necessary hardware for mounting
struts.
35165 For mounting four hole
struts on Fat Boy® and
Heritage Softail® models from 1986 to
present (repl. OEM 59969-86) . . . .$63.44
35164 For mounting six hole struts
on Springer, Custom and Bad Boy™ models (repl. OEM
59954-86) . . . . . . . . . . . . . . . . . . . . . . .$63.44
Hardware Kits
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Chrome Hardware Kits for Twin Cam 88® Models
Whether you are looking to turn your new Twin Cam 88® model into a
show bike or just to add that extra sparkle of chrome, Custom Chrome
has you covered. From complete kits to individual sections for your motor
or transmission.
Electrical
Complete Kits for Motor and Transmission
32068 With knurled sockethead & buttonhead Torx® hardware . . . .$202.79
32069 With smooth sockethead & smooth buttonhead hardware . .$241.79
Individual Kits
These individual hardware kits are the same as the ones found in the complete kits. All hardware is sockethead unless otherwise specified.
Cam Cover
Transmission Top Cover
32070 Knurled . . . . . . . . . . . . .$26.69
32071 Smooth . . . . . . . . . . . . .$31.69
32081 Knurled . . . . . . . . . . . . .$19.89
32082 Smooth . . . . . . . . . . . . .$24.69
Rocker Box Covers
Transmission Side Cover
32075 Knurled . . . . . . . . . . . . .$34.19
32076 Smooth . . . . . . . . . . . . .$41.19
32083 Knurled . . . . . . . . . . . . .$34.99
32084 Smooth . . . . . . . . . . . . .$47.29
Lifter Blocks
Miscellaneous Kits
32077 Knurled . . . . . . . . . . . . .$26.19
32078 Smooth . . . . . . . . . . . . .$26.69
Include buttonhead Torx® hardware
32072 For clutch cover . . . . . .$17.79
32073 For inspection cover .$17.99
32074 For cam position
sensor cover . . . . . . . . .$19.19
Inner Primary Cover
32079 Knurled . . . . . . . . . . . . . .$6.34
32080 Smooth . . . . . . . . . . . . . .$7.69
Rocker Box
Hardware Kit
Full 32-piece rocker box mounting
kit contains everything needed to
install two rocker boxes.
94053 Fits the lower rocker
boxes on all Evolution®
Big Twin and Sportster®
models . . . . . . . . . . . . .$17.49
Shock Mounting Kit
Includes precision-machined shoulder bolts and washers for the correct installation of rear shock
absorbers on all Softail® models
from 1984 thru 1999. . . . . . . . .$17.09
28399 Set of four
Exhaust
Show Bike Kits for Twin Cam 88® Models by Colony
Give your bike the ultimate in bolt-on beauty. Chrome-plated sockethead
kits for motor and transmission.
Intake
Complete Kits
36949 For all 1999 Dyna Glide models . . . . . . . . . . . . . . . . . . . . . . . . . . . .$155.99
36980 For all 1999 FLT, FLHT and Road King® models . . . . . . . . . . . . .$148.99
Individual Kits for Dyna Glide and FLT, FLHT and Road King®
Models from 1999 to Present
36982 For cam cover . . . . . . .$13.99
36989 For primary cover
on Dyna Glide
36983 For lifter blocks . . . . . .$10.99
models . . . . . . . . . . . . . .$35.99
36984 For engine case . . . . . .$17.49
36990 For primary cover
36985 For oil filter adapter . .$5.79
on FLT, FLHT and
Road King® models . .$24.99
36986 For oil hose cover . . . . .$5.79
36991 For rocker boxes . . . . .$18.24
36987 For front motor
mount . . . . . . . . . . . . . .$16.99
36992 For transmissionto-motor mount . . . . .$12.49
36988 For point cover . . . . . . .$5.84
Other Colony Dress-Up Kits
35927 Complete upper and lower motor mount kit for Softail®
models from 1984 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37.99
95195 Motor mount bolts for Evolution® style engines in after market
frames feature a 31/2" upper and 23/4" lower . . . . . . . . . . . . . . . .$37.99
72073 Buttonhead fork drain screw kit with brass washers
(repl. OEM‘s #45790-80, #45996-73) . . . . . . . . . . . . . . . . . . . . . . . . . .$3.24
72056 Polished sockethead timing cover kit for Evolution®
Big Twin models from 1993 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . .$9.99
72055 Cap nut oil pump mounting kit for 1992 thru 1999 Evolution®
Big Twin models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99
33290 Pack of 10 chrome flathead allen screws for mounting
CC #12748 kickstand to the forward control location
on Softail® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99
36319 Acorn primary cover screw kit for Softail® and Dyna Glide
models from 1989 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.99
Zinc-Plated Kits
72058 Motor mount kit. Fits Softail® models from 1984 thru 1999 . . .$31.99
72062 Lower motor mount kit. Fits FLT, FLHT FLHS, Road King®
and FXR models 1980 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.49
72064 Transmission mount kit. Fits 5-speed Softail® models
from 1986 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.59
72069 Flanged nut and stud case kit for Evolution® Big Twin
models from 1996 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$33.49
17.95
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
Cross
Reference
Colony Hardware
Chrome Brake Rotor, Drum and Sprocket Hardware
Chrome-plated bolts and where required, nylon insert backing nuts. The finest Americanmade quality by Colony.
A
Brake Rotor Kits
H
B
I
C
J
D
K
E
L
F
M
General
G
N
P
O
Q
Style
Part
Description
A 36233 Rear rotor-to-hub screw kit for FLT and FLHT models from 1982
thru 1985 (repl. OEM #1642) 7/16"-14 x 1.75" countersunk . . . . . . . . . . . . . . . .$11.99
B 36230 Rear rotor-to-hub screw and nut kit for FX and Sportster® models from
1979 thru 1991, and FL models with spoke or cast wheels from 1981
thru 1984 (repl. OEMs 1605 and 1604) 3/8"-16 x 1.5" countersunk . . . . . . . . .$11.99
C 36232 Rear rotor-to-hub screw kit for FLT models from 1980 thru 1981
(repl. OEM #1643) 7/16"-14 x 1.25" countersunk . . . . . . . . . . . . . . . . . . . . . . . . . .$10.89
D 36225 Front rotor-to-hub screw and nut kit for FXWG models from 1980
thru 1983 (dual disc requires 2 sets). 5/16"-18 x 1" countersunk . . . . . . . . . . .$11.19
E 25193 Front rotor-to-hub screws for dual disc FX and Sportster® models
from 1978 thru 1982. 5/16"-18 x 1" countersunk . . . . . . . . . . . . . . . . . . . . . . . . . .$16.14
F 36228 Front rotor-to-hub screws for single disc FX and Sportster® models
from 1974 thru 1977. 1/4"-20 x 5/8" countersunk . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99
G 35657 Rear rotor-to-hub screws for FX models from 1974 thru 1980
Sportster® models 1974 thru 1977. 5/16"-18 x 1.25" countersunk . . . . . . . . . .$9.49
H 36226 Front or rear rotor-to-hub thin hex head bolt and nut kit for rear of
FL models 1973 thru 1980, front on FL models 1973 thru 1974, front on FX
and XL models 1973 (repl. OEM #41198-73) 3/8-16" x 1" thin hex . . . . . . . . .$10.99
I 36227 Same as 36226, above, but with buttonhead screws instead of hex . . . . . . . .$10.99
J 35660 Rear cast wheel rotor-to-hub for FX and FL models from 1979 thru
1991 and XL models 1979 thru 1996. 3/8"-16 x 1" buttonhead . . . . . . . . . . . . .$9.49
K 36231 Front rotor-to-hub screw and nut kit for Softail® and FXWG models
from 1984 to present. 5/16"-18 x 7/8" buttonhead . . . . . . . . . . . . . . . . . . . . . . . .$10.99
L 36229 Front rotor-to-hub screws for FX, FXR, Sportster® and FLT models
from 1984 to present (dual disc requires 2 sets). 5/16"-18 x 7/8"
buttonhead screws (repl. OEM 3655) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.89
Rear Brake Drum Kit
M 36324 Rear brake drum bolt and nut kit special shouldered bolts and locknut
for 1952 thru 1978 XL models with rear drum. 5/16"-24 special hex . . . . . . .$13.99
Sprocket and Pulley Kits
L 36229 Front rotor-to-hub screws for FX, FXR, Sportster® and FLT models
from 1984 to present (dual disc requires 2 sets). 5/16"-18 x 7/8"
buttonhead screws (repl. OEM 3655) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.89
N
36114 . . .Sockethead bolt and nut kit for FXWG and FXRS models from 1985
to present with belt drive and spoke rear wheel (repl. OEM 4726) . . . . . . . . .$19.49
O 36113 Sockethead bolt and nut kit for FL, FX, and XL models with chain
drive spoke rear wheel from 1973 to present (repl. OEM 41197-73) . . . . . . . .$19.49
P 36112 Sockethead bolt and washer kit for FL and FX models from 1973
to present and Sportster® models 1973 thru 1991 with cast rear
wheel and belt drive (repl. OEM 3769) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.74
Q 35659 Bolt, nut and washer kit with special domed hex bolts for FX, FL
and XL models from 1973 thru 2003 with spoke rear wheels . . . . . . . . . . . . . .$25.99
Q 35658 Bolt and washer kit with special domed hex bolts for FX and FL
models from 1973 to present with cast rear wheels . . . . . . . . . . . . . . . . . . . . . . .$23.38
— 72059 Custom sprocket hardware kit with flat socket screws, countersunk
washers and locknuts. Fits chain drive FL. FX and XL models with
spoke wheels from 1973 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.99
— 72060 Custom sprocket hardware kit with flat socket screws and countersunk washers. Fits belt or chain drive FL, FX and XL models with cast
wheels from 1973 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.49
— 72061 Custom sprocket hardware kit with flat socket screws, countersunk
washers and locknuts. Fits belt drive FXWG, FXRS models with spoke wheels .
from 1985 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.99
Inspection Cover Screw Kit
for Big Twin Models
Chrome Swingarm Pivot Bolts
Chrome hex head swingarm pivot bolts. Grade 8 bolts
measure 3/4"-16 x 3"-long. Sold in pairs. . . . . . . . . . . .$26.54
84378 Fit all Softail® models from 1984 thru 1999
Swingarm Pivot Bolt Spacers
Fit all Softail® models from 1987 thru 1999. . . . . . . . .$29.99
84602 Pack of 10
Countersunk screws for the inspection cover
on all Big Twin models from 1989 thru 1997.
Kit includes four 1/4"-20 x 1/2"-long screws
and two 1/4"-20 x 21/4"-long screws. 1989 thru
1993 models require four 1/2"-long screws.
1994 thru 1997 models require two 1/2"-long
and two 21/4"-long screws. . . . . . . . . . . . . . . .$18.49
58686 Complete kit
17
17.96
Colony Cross Reference
Apparel
Colony Cross Reference List
A quick checklist of all Colony products carried by Custom Chrome®, in numerical order by Colony part number. Please use this list in conjunction with the
Custom Chrome® part number-to-page cross reference guide in the back of the catalog for more information on a given kit.
Colony
1000-P
1001-P
7017-16
7106-1
7112-19
7113-2
7118-9
7120-4
7129-12
7131-8
7134-8
7135-8
7136-14
7137-22
7139-4
7141-18
7142-4
7143-4
7149-11
7150-8
7153-20
7154-2
7155-4
7156-2
7207-8
7349-3
7351-2
7408-10
7412-24
7500-2
7501-1
7507-20
7508-20
7509-20
7600-4
7601-2
7603-4
7604-7
7618-1
7619-1
7628-8
7629-14
7631-11
7800-8
7801-2
7802-1
7803-11
7807-3
7808-4
7809-2
7813-8
7815-4
7822-12
7823-12
CC
36949
36980
36144
36068
36130
36147
36157
36030
36312
36149
36042
36041
36161
36151
36163
36164
36065
36064
36131
36158
36152
36160
36133
36067
36184
36055
36066
36134
36153
36062
36072
36038
36037
36039
36061
36060
36154
36155
36069
36070
36150
36162
36132
36156
36052
36071
36287
36051
36040
36059
36178
36024
36049
36048
Colony
7824-12
7825-20
7904
7908
7909
7910
7911
7915
7916
7918
7919
7920
7921
7922
7923
8005-12
8101-6
8102-16
8104-16
8106-16
8108-1
8110-12
8112-20
8114-1
8116-1
8118-1
8119-1
8134-34
8137-34
8140-34
8143-34
8145-10
8147-13
8149-12
8151-2
8153-2
8155-30
8164-19
8166-12
8167-12
8168-6
8169-6
8170-10
8203-6
8206-9
8400-8
8402-2
8405-2
8441-1
8449-22
8480-8
8494-1
858A
8600-8
CC
Colony
CC
36047
36012
36173
36174
36262
36261
36175
36329
3330
36332
36282
36283
36284
35710
36288
36182
36073
36074
36075
36076
36077
36078
36079
36080
36081
36082
36083
36088
36089
36090
36091
36092
36093
36094
36095
36096
36097
36100
36101
36102
36103
36104
36181
36105
36183
36119
36285
36109
36110
36111
36177
36191
58680
36142
8601-8
8602-20
8604-16
8608-36
8610-1
8614-4
8616-4
8618-20
8700-2
8701-2
8702-2
8703-2
8704-2
8705-2
8706-6
8707-6
8708-8
8714-20
8717-4
8718-4
8738-10
8739-10
8747-12
8748-12
8750-14
8753-2
8754-2
8757-8
8758-10
8759-5
8761-7
8764-2
8765-2
8766-10
8776-2
8787-2
8791-10
8792-5
8793-5
8794-10
8811-16
8831-10
8834-10
8835-10
8842-10
8847-5
8856-8
8857-8
8858-8
8860-8
8861-8
8863-1
8869-13
8870-21
36143
36141
36137
36190
36186
36188
36189
36192
36201
36202
36203
36204
36205
36206
36210
36211
36275
36277
36222
36223
36226
36227
36297
36268
36269
36270
36265
36266
25193
36228
36264
36258
36259
36260
36252
36251
36230
36232
36229
36231
36324
36225
36113
36112
36114
36233
36193
36194
36195
36196
36197
15234
35901
36299
Colony
8871-13
8879-30
8880-18
8881-18
8909-13-P
8910-5
8917-19
8919-19
8919-19-P
8921-5
8931-16
8934-2
9202-12
9213-4
9304-1
9305-7
9307-17
9402-1
9420-21
9424-8
9507-8
9515-2
9516-12
9517-12
9518-6
9519-6
9600-5
9608-10
9609-15
9632-5
9633-50
9636-8
9637-13
9639-22
9644-2
9653-4
9654-4
9655-4
9749-11
9750-6
9751-11
9752-4
9758-2
9759-4
9760-4
9762-16
9763-16
9764-16
9765-4
9766-4
9767-15
9768-15
9769-17
9770-17
CC
36294
36304
36305
36306
36978
36300
36319
36313
36989
36301
36298
36198
36050
35627
35622
35620
35619
35623
35635
36053
36107
35629
35600
35601
35602
35603
35657
35658
35659
35660
35604
35607
35621
35633
35614
35636
35637
35638
35665
35666
35667
35668
35672
35673
35674
35675
35676
72055
35677
35678
35679
35680
35681
35682
Colony
9771-8
9772-22
9773-8
9774-8
9775-8
9776-10
9777-8
9778-8
9782-4
9783-4
9784-4
9785-9
9787-12
9788-24
9789-17
9789-17-P
9793-9
9794-12
9795-12
9796-12
9799-20
9806-8
9807-10
9809-4
9810-4
9811-3
9812-3
9817-15
9818-5
9819-12
9819-12-P
9820-6
9822-4
9823-3
9824-3
9825-4
9826-4
9827-12
9833-24
9834-8
9835-8
9836-5
9843-8
9844-5
9854-28
9855-28
9856-15
9857-10
9858-15
9859-20
9860-2
9861-2
9863-5
9865-20
CC
35683
35684
35685
35686
35687
35688
35689
35690
35691
35696
35697
35698
35700
35701
35711
36979
35715
35716
35717
35718
35702
35709
35912
35932
35933
35911
35935
35695
35914
35913
72056
72057
35909
36278
36279
36280
36281
35915
35922
35923
35921
35920
35925
35924
35927
72058
72059
72060
72061
35926
72062
35928
35929
72063
Colony
9866-18
9867-18
9871-10
9870-16
9872-10
9873-16
9882-22
9883-20
9884-20
9885-2
9887-20
9904-17
9910-4
9912-2
9913-2
9914-2
9915-4
9916-2
9920-46
9921-56
9935-8-P
9937-20-P
9939-6-P
9942-16-P
9944-24-P
9946-20-P
9950-6-P
9952-11-P
9954-5
9956-18-P
9959-38-P
9968-12
9969-4
9970-20
9971-5
9974-4
9975-4
9981-8
9986-8
9988-4
9989-4
9990-5
9991-5
9992-5
9993-5
9994-4
9995-4
9996-3
9997-3
9998-3
9999-3
SHC-995
Bike Kits
& Trailers
CC
36327
72064
72065
36326
72066
36325
72067
72068
72069
72070
72071
72072
72073
72074
72075
35162
35163
36981
35165
35164
36992
36987
36985
36983
36991
36982
36986
36977
36988
36984
36990
36120
36121
36122
14370
35721
35722
35723
35724
35725
35726
35727
35728
35729
35730
35731
35732
35733
35734
35735
35736
14371
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
17.97
Cross
Reference
Hardware Assortments
Chrome-Plated Nuts
and Washers
Stainless Steel Nuts
and Washers
• Assortment contains 1200
pieces of fine and coarse hardware in the sizes listed below
• Can be re-ordered in individual
packs of 100 of each size
25070 Complete
assortment . . . . . . . .$388.69
• Assortment contains 600 pieces
of fine and coarse hardware in
the sizes listed below
32360 Complete
assortment . . . . . . . .$604.99
Part #
Chrome-Plated ‘Grade 8’ Torx® Sockethead Screws
• Available with smooth or knurled finishes
• Assortment contains 20 sizes of UNC and UNF buttonhead screws
• Can be re-ordered in individual packs of 10 of each size
33321 Complete smooth assortment (fine and coarse – 200 pieces) . .$549.99
33300 Complete knurled assortment (fine and coarse – 200 pieces) . .$342.69
Smooth
General
33322 . . . . . . . . . .$29.24
33323 . . . . . . . . . .$29.24
n/a
n/a
33326 . . . . . . . . . .$31.19
33328 . . . . . . . . . .$34.24
33329 . . . . . . . . . .$35.84
33330 . . . . . . . . . .$37.44
33331 . . . . . . . . . .$34.24
33332 . . . . . . . . . .$43.49
33333 . . . . . . . . . .$43.89
33334 . . . . . . . . . .$29.24
33335 . . . . . . . . . .$32.59
33336 . . . . . . . . . .$27.69
33337 . . . . . . . . . .$37.44
33338 . . . . . . . . . .$34.24
33339 . . . . . . . . . .$34.89
33350 . . . . . . . . . .$50.54
Knurled
25173
25176
25174
25177
25175
25178
25179
25182
25180
25183
25181
25184
Size
1/4" Lock washer . . .$31.59
1/4" Flat washer . . . .$34.59
5/16" Lock washer . .$29.99
5/16" Flat washer . . .$31.59
3/8" Lock washer . . .$29.99
3/8" Flat washer . . . .$29.99
1/4"-20 Hex nut . . . .$30.39
1/4"-28 Hex nut . . . .$30.39
5/16"-18 Hex nut . . .$33.89
5/16"-24 Hex nut . . .$33.89
3/8"-16 Hex nut . . . .$43.99
3/8"-24 Hex nut . . . .$43.99
Part #
32361
32362
32363
32364
32365
32366
32367
32368
32369
32370
32371
32372
Size
1/4" Lock washer . . .$52.89
1/4" Flat washer . . . .$52.89
5/16" Lock washer . .$64.14
5/16" Flat washer . . .$64.14
3/8" Lock washer . . .$73.69
3/8" Flat washer . . . .$73.69
1/4"-20 Hex nut . . . .$51.29
1/4"-28 Hex nut . . . .$73.69
5/16"-18 Hex nut . . .$59.29
5/16"-24 Hex nut . . .$59.29
3/8"-16 Hex nut . . . .$68.89
3/8"-24 Hex nut . . . .$68.89
Size
33301 . . . . . . . . . .$13.99
33302 . . . . . . . . . .$14.89
33303 . . . . . . . . . .$14.89
33304 . . . . . . . . . .$15.74
33305 . . . . . . . . . .$20.09
33306 . . . . . . . . . .$16.59
33308 . . . . . . . . . .$17.54
33309 . . . . . . . . . .$20.09
33310 . . . . . . . . . .$21.09
33311 . . . . . . . . . .$25.39
33312 . . . . . . . . . .$26.14
33313 . . . . . . . . . .$15.74
33314 . . . . . . . . . .$16.59
33315 . . . . . . . . . .$16.59
33316 . . . . . . . . . .$17.54
33317 . . . . . . . . . .$18.39
33318 . . . . . . . . . .$20.99
33319 . . . . . . . . . .$20.09
1/4"-20 x 5/8"
1/4"-20 x 3/4"
1/4"-20 x 7/8"
1/4"-20 x 1"
1/4"-20 x 11/8"
1/4"-20 x 11/4"
1/4"-20 x 11/2"
1/4"-20 x 13/4"
1/4"-20 x 2"
1/4"-20 x 21/4"
1/4"-20 x 21/2"
5/16"-18 x 3/4"
5/16"-18 x 7/8"
5/16"-18 x 1"
5/16"-18 x 11/4"
5/16"-18 x 11/2"
5/16"-18 x 13/4"
3/8"-16 x 11/4"
Parts Organizer System
Sturdy, plastic storage module is an easy way to organize parts and components. Unique design permits additional modules to be attached to the top
or sides. Each module contains two non-divided drawers, each of which
measures 41/2"-wide x 13/8"-high x 65/8"-deep.
14600 Two-drawer module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49
17
17.98
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Chrome Nylon-Inserted
Lock Nut Assortment
Chrome Acorn Nut
Assortment
of fine and coarse nuts in the
sizes listed below
packs of each size
14620 Complete
assortment . . . . . . .$136.99
of fine and coarse screws in the
sizes listed below
packs of each size
14601 Complete
assortment . . . . . . . .$166.99
Part #
14621
14622
14623
14624
14625
14626
14627
14628
14629
14630
14631
14632
Size
10-24
10-32
1/4"-20
1/4"-28
5/16"-18
5/16"-24
3/8"-16
3/8"-24
7/16"-14
7/16"-20
1/2"-13
1/2"-20
Qty
10 . . . . . . . .$7.29
10 . . . . . . . .$7.29
10 . . . . . . . .$7.64
10 . . . . . . . .$7.64
10 . . . . . . . .$8.19
10 . . . . . . . .$8.24
10 . . . . . . . .$9.69
10 . . . . . . . .$9.69
10 . . . . . . .$10.39
10 . . . . . . .$10.39
5 . . . . . . . . .$6.69
5 . . . . . . . . .$6.69
Part #
14606
14607
14608
14609
14610
14611
14612
14613
14614
14615
14616
14617
Size
10-24
10-32
1/4"-20
1/4"-28
5/16"-18
5/16"-24
3/8"-16
3/8"-24
7/16"-14
7/16"-20
1/2"-13
1/2"-20
Qty
10 . . . . . . . .$11.94
10 . . . . . . . .$11.94
10 . . . . . . . .$12.29
10 . . . . . . . .$12.29
10 . . . . . . . .$13.19
10 . . . . . . . .$13.19
10 . . . . . . . .$15.59
10 . . . . . . . .$15.59
10 . . . . . . . .$18.44
10 . . . . . . . .$18.44
5 . . . . . . . . .$15.59
5 . . . . . . . . .$15.59
Hand
Controls
Lighting
Chrome-Plated Spacers
90-piece assortment of chrome-plated steel spacers to fit screws with 1/4",
5/16" and 3/8” diameter. Can be re-ordered in individual packs
14641 Complete assortment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$239.39
Part #
Size
14642
14643
14644
14645
14646
14647
14648
14649
14650
1/4" x 1/8"
1/4" x 1/4"
1/4" x 3/8"
1/4" x 1/2"
1/4" x 3/4"
1/4" x 1"
5/16" x 1/8"
5/16" x 1/4"
5/16" x 3/8"
Qty
5
5
5
5
5
5
5
5
5
. . . .$7.39
. . . .$7.49
. . . .$7.59
. . .$10.69
. . .$10.79
. . .$13.29
. . . .$7.39
. . . .$7.49
. . . .$8.59
Part #
Size
14651
14652
14653
14654
14655
14656
14657
14658
14659
5/16" x 1/2"
5/16" x 3/4"
5/16" x 1"
3/8" x 1/8"
3/8" x 1/4"
3/8" x 3/8"
3/8" x 1/2"
3/8" x 3/4"
3/8" x 1"
Electrical
Qty
5
5
5
5
5
5
5
5
5
. . .$10.69
. . .$10.79
. . .$13.29
. . . .$7.49
Exhaust
. . . .$8.49
. . .$10.29
. . .$11.19
Intake
. . .$12.29
. . .$13.39
Engine
Chrome Flat Washer
Assortment
Chrome 7/16" and 1/2"
Bolt Assortment Trays
• Compartmented assortment trays
include sizes and quantities of parts
listed as components
• Components can be re-ordered
in individual packs of each size (refill
quantities listed)
32811 Complete assortment $477.79
• Compartmented assortment trays include
sizes and quantities of parts listed as components
• Components can be re-ordered in individual
32830 7/16" and 1/2" coarse (UNC)
hex bolt assortment . . . . . . . . . . . .$181.59
32845 7/16" and 1/2" fine (UNF)
hex bolt assortment . . . . . . . . . . . .$181.59
Part #
32812
32813
32814
32815
32816
32817
32818
32819
32820
32821
32822
32823
32824
32825
32826
32827
Size
Qty
1/4" AN 50 . . . . . . . . . . . . .$49.69
5/16" AN 50 . . . . . . . . . . . . .$49.69
3/8" AN 50 . . . . . . . . . . . . .$49.69
7/16" SAE25 . . . . . . . . . . . . .$18.99
1/2" SAE 25 . . . . . . . . . . . . .$18.09
9/16" SAE25 . . . . . . . . . . . . .$20.99
#10 USS 25 . . . . . . . . . . . . .$16.54
1/4" USS 25 . . . . . . . . . . . . .$17.29
5/16" USS25 . . . . . . . . . . . . .$17.29
3/8" USS 25 . . . . . . . . . . . . .$16.99
7/16" USS25 . . . . . . . . . . . . .$18.09
1/2" USS 25 . . . . . . . . . . . . .$20.24
1/4" x 7/8"25 . . . . . . . . . . . .$23.84
1/4" x 1" 25 . . . . . . . . . . . . .$26.94
5/16" x 11/2"25 . . . . . . . . . .$34.94
3/8" x 11/4"25 . . . . . . . . . . .$36.49
Coarse
32831 . . .$10.34
32832 . . .$10.84
32833 . . .$10.99
32834 . . .$12.39
32835 . . .$13.34
32836 . . .$10.84
32837 . . .$10.99
32838 . . .$11.74
32839 . . .$12.39
32843 . . .$19.59
32841 . . .$14.99
32842 . . .$15.99
32844 . . .$14.39
Fine
32846
32847
32848
32849
32850
32851
32852
32853
32854
32855
32856
32857
32858
Size
. . . .$9.89 7/16" x 1"
Gaskets
Tranny
& Clutch
Driveline
. . .$10.44 7/16" x 11/4"
. . .$10.49 7/16" x 11/2"
. . .$11.79 7/16" x 13/4"
. . .$12.99 7/16" x 2"
Wheels,
Tires
& Brakes
. . .$10.44 1/2" x 3/4"
. . .$10.49 1/2" x 1"
. . .$11.09 1/2" x 11/4"
Frames
. . .$11.79 1/2" x 11/2"
. . .$13.74 1/2" x 2"
. . .$14.24 1/2" x 21/4"
. . .$15.29 1/2" x 21/2"
Forks
& Shocks
. . .$18.69 1/2" x 23/4"
Sheetmetal
General
17.99
Cross
Reference
Chrome-Plated ‘Grade 8’
Sockethead Screws
Chrome-Plated Grade 8 ‘Smooth’
Sockethead Screws
Stainless Steel
Sockethead Screws
• Assortments contain 24 sizes of UNC or UNF
sockethead screws
• Can be re-ordered in individual packs of 10
of each size
(coarse – 215 pieces) . . . . . . . . . . . .$361.39
(fine – 215 pieces) . . . . . . . . . . . . . .$361.39
• Assortments contain 24 sizes of UNC or
UNF sockethead screws with polished
“smooth” heads
of each size
(coarse – 215 pieces) . . . . . . . . . . . .$449.99
(fine – 215 pieces) . . . . . . . . . . . . . .$454.19
• Assortments contain 24 sizes of UNC or UNF
sockethead screws
of each size
(coarse – 215 pieces) . . . . . . . . . . . .$634.19
(fine – 215 pieces) . . . . . . . . . . . . . .$634.19
Coarse
32503 ....$20.99
32504 ....$20.99
32505 ....$22.69
32506 ....$22.69
32507 ....$24.39
32508 ....$25.99
32509 ....$27.59
32510 ....$27.59
32511 ....$30.79
32512 ....$24.39
32513 ....$25.99
32514 ....$25.99
32515 ....$27.59
32516 ....$30.79
32517 ....$30.79
32518 ....$34.09
32519 ....$37.34
32520 ....$38.94
32521 ....$30.79
32522 ....$34.09
32523 ....$37.34
32524 ....$40.64
32525 ....$42.24
32526 ....$47.09
Coarse
General
32103 ......$9.69
32104 ......$9.69
32105 ......$9.99
32106 ....$10.69
32107 ....$10.99
32108 ....$11.34
32109 ....$11.34
32110 ....$11.64
32111 ....$12.34
32112 ......$9.99
32113 ....$10.69
32114 ....$10.99
32115 ....$11.34
32116 ....$12.34
32117 ....$12.79
32118 ....$13.09
32119 ....$13.99
32120 ....$15.34
32121 ....$11.64
32122 ....$12.79
32123 ....$12.79
32124 ....$13.74
32125 ....$14.89
32126 ....$15.74
Fine
32127.......$9.89
32128.......$9.89
32129.....$10.19
32130.....$10.89
32131.....$11.19
32132.....$11.49
32133.....$11.49
32134.....$11.79
32135.....$12.49
32136.....$10.24
32137.....$10.89
32138.....$11.19
32139.....$11.49
32140.....$12.49
32141.....$12.99
32142.....$13.29
32143.....$14.24
32144.....$15.59
32145.....$11.79
32146.....$12.99
32147.....$13.29
32148.....$14.24
32149.....$14.89
32150.....$15.99
Size
1/4" x 5/8"
1/4" x 3/4"
1/4" x 7/8"
1/4" x 1"
1/4" x 11/4"
1/4" x 11/2"
1/4" x 13/4"
1/4" x 2"
1/4" x 21/4"
5/16" x 5/8"
5/16" x 3/4"
5/16" x 7/8"
5/16" x 1"
5/16" x 11/4"
5/16" x 11/2"
5/16" x 13/4"
5/16" x 2"
5/16" x 21/4"
3/8" x 3/4"
3/8" x 1"
3/8" x 11/4"
3/8" x 11/2"
3/8" x 13/4"
3/8" x 2"
32203 ....$17.49
32204 ....$17.49
32205 ....$17.79
32206 ....$18.29
32207 ....$18.79
32208 ....$18.99
32209 ....$18.99
32210 ....$19.69
32211 ....$20.19
32212 ....$17.79
32213 ....$18.29
32214 ....$18.79
32215 ....$18.99
32216 ....$20.19
32217 ....$20.49
32218 ....$20.79
32219 ....$21.79
32220 ....$23.09
32221 ....$19.69
32222 ....$20.49
32223 ....$20.49
32224 ....$21.49
32225 ....$22.69
32226 ....$23.39
Fine
32227.....$17.59
32228.....$17.59
32229.....$17.99
32230.....$18.49
32231.....$18.99
32232.....$19.19
32233.....$19.19
32234.....$19.89
32235.....$20.39
32236.....$17.99
32237.....$18.49
32238.....$18.99
32239.....$19.19
32240.....$20.39
32241.....$20.69
32242.....$20.99
32243.....$21.99
32244.....$23.19
32245.....$19.89
32246.....$20.69
32247.....$20.99
32248.....$21.99
32249.....$22.89
32250.....$23.59
Size
1/4" x 5/8"
1/4" x 3/4"
1/4" x 7/8"
1/4" x 1"
1/4" x 11/4"
1/4" x 11/2"
1/4" x 13/4"
1/4" x 2"
1/4" x 21/4"
5/16" x 5/8"
5/16" x 3/4"
5/16" x 7/8"
5/16" x 1"
5/16" x 11/4"
5/16" x 11/2"
5/16" x 13/4"
5/16" x 2"
5/16" x 21/4"
3/8" x 3/4"
3/8" x 1"
3/8" x 11/4"
3/8" x 11/2"
3/8" x 13/4"
3/8" x 2"
Coarse
Fine
32527.....$22.54
32528.....$24.19
32529.....$25.79
32530.....$38.69
32531.....$26.99
32532.....$26.99
32533.....$30.59
32534.....$33.89
32535.....$35.49
32536.....$27.39
32537.....$30.59
32538.....$30.59
32539.....$33.89
32540.....$33.89
32541.....$33.89
32542.....$37.09
32543.....$37.74
32544.....$40.34
32545.....$33.89
32546.....$33.89
32547.....$30.59
32548.....$33.89
32549.....$37.09
32550.....$38.69
Small Item Storage Box by Flambeau
Translucent plastic storage box measures 11" x 63/4" x 13/4".
18 compartments, each measures 13/4" x 2" x 11/2". Great
for small carburetor parts, nuts and bolts, clips, etc. . .$6.14
100500 Sold each
17
17.100
Size
1/4" x 5/8"
1/4" x 3/4"
1/4" x 7/8"
1/4" x 1"
1/4" x 11/4"
1/4" x 11/2"
1/4" x 13/4"
1/4" x 2"
1/4" x 21/4"
5/16" x 5/8"
5/16" x 3/4"
5/16" x 7/8"
5/16" x 1"
5/16" x 11/4"
5/16" x 11/2"
5/16" x 13/4"
5/16" x 2"
5/16" x 21/4"
3/8" x 3/4"
3/8" x 1"
3/8" x 11/4"
3/8" x 11/2"
3/8" x 13/4"
3/8" x 2"
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Stainless-Steel
‘Smooth’ Sockethead Screws
UNF sockethead screws with polished
“smooth” heads
of each size
(coarse – 215 pieces) . . . . . . . . . . .$906.14
(fine – 215 pieces) . . . . . . . . . . . . . .$906.14
Coarse
32603 . . .$30.59
32604 . . .$33.84
32605 . . .$33.84
32606 . . .$33.84
32607 . . .$37.04
32608 . . .$37.04
32609 . . .$40.34
32610 . . .$40.34
32611 . . .$41.94
32612 . . .$35.44
32613 . . .$37.04
32614 . . .$38.04
32615 . . .$39.09
32616 . . .$41.49
32617 . . .$41.94
32618 . . .$43.54
32619 . . .$48.39
32620 . . .$51.59
32621 . . .$59.64
32622 . . .$64.54
32623 . . .$67.74
32624 . . .$69.34
32625 . . .$74.09
32626 . . .$78.14
Fine
32627 . . .$33.84
32628 . . .$35.44
32629 . . .$36.99
32630 . . .$36.64
32631 . . .$38.64
32632 . . .$38.29
32633 . . .$40.29
32634 . . .$42.44
32635 . . .$46.69
32636 . . .$38.64
32637 . . .$40.29
32638 . . .$40.29
32639 . . .$42.44
32640 . . .$44.09
32641 . . .$41.89
32642 . . .$45.09
32643 . . .$46.69
32644 . . .$51.54
32645 . . .$64.49
32646 . . .$67.69
32647 . . .$56.29
32648 . . .$57.94
32649 . . .$64.49
32650 . . .$67.69
Size
1/4" x 5/8"
1/4" x 3/4"
1/4" x 7/8"
1/4" x 1"
1/4" x 11/4"
1/4" x 11/2"
1/4" x 13/4"
1/4" x 2"
1/4" x 21/4"
5/16" x 5/8"
5/16" x 3/4"
5/16" x 7/8"
5/16" x 1"
5/16" x 11/4"
5/16" x 11/2"
5/16" x 13/4"
5/16" x 2"
5/16" x 21/4"
3/8" x 3/4"
3/8" x 1"
3/8" x 11/4"
3/8" x 11/2"
3/8" x 13/4"
3/8" x 2"
Chrome-Plated
‘Grade 5’ Hex Head Capscrews
Polished Stainless
Steel Hex Head Capscrews
UNF capscrews
of each size
(coarse – 220 pieces) . . . . . . . . . . .$387.79
(fine – 220 pieces) . . . . . . . . . . . . .$387.79
• Assortments contain 24 sizes of polished UNC
or UNF capscrews
of each size
(coarse – 220 pieces) . . . . . . . . . . . .$749.99
(fine – 220 pieces) . . . . . . . . . . . . . . .$749.99
Coarse
25125 . . .$16.79
25126 . . .$20.19
25127 . . .$20.19
25128 . . .$16.79
25129 . . .$16.79
25130 . . .$16.79
25131 . . .$20.19
25132 . . .$20.19
25133 . . .$21.74
25134 . . .$20.19
25135 . . .$15.99
25136 . . .$20.19
25137 . . .$15.99
25138 . . .$15.99
25139 . . .$15.99
25140 . . .$21.74
25141 . . .$15.99
25142 . . .$16.79
25143 . . .$20.19
25144 . . .$15.99
25145 . . .$21.74
25146 . . .$21.74
25147 . . .$18.59
25148 . . .$16.79
Fine
25149 . . .$15.89
25150 . . .$15.89
25151 . . .$15.89
25152 . . .$16.79
25153 . . .$16.79
25154 . . .$20.19
25155 . . .$20.19
25156 . . .$20.19
25157 . . .$20.39
25158 . . .$20.19
25159 . . .$20.19
25160 . . .$20.19
25161 . . .$20.19
25162 . . .$20.19
25163 . . .$20.39
25164 . . .$20.39
25165 . . .$20.39
25166 . . .$20.99
25167 . . .$20.19
25168 . . .$20.39
25169 . . .$20.39
25170 . . .$20.99
25171 . . .$20.99
25172 . . .$21.59
Size
1/4" x 5/8"
1/4" x 3/4"
1/4" x 7/8"
1/4" x 1"
1/4" x 11/4"
1/4" x 11/2"
1/4" x 13/4"
1/4" x 2"
1/4" x 21/4"
5/16" x 5/8"
5/16" x 3/4"
5/16" x 7/8"
5/16" x 1"
5/16" x 11/4"
5/16" x 11/2"
5/16" x 13/4"
5/16" x 2"
5/16" x 21/4"
3/8" x 3/4"
3/8" x 1"
3/8" x 11/4"
3/8" x 11/2"
3/8" x 13/4"
3/8" x 2"
Coarse
Fine
32403 . . .$38.19
32404 . . .$38.19
32405 . . .$30.29
32406 . . .$30.29
32407 . . .$39.94
32408 . . .$30.29
32409 . . .$30.29
32410 . . .$31.94
32411 . . .$31.94
32412 . . .$30.29
32413 . . .$30.29
32414 . . .$31.94
32415 . . .$46.14
32416 . . .$40.69
32417 . . .$38.99
32418 . . .$41.44
32419 . . .$41.44
32420 . . .$32.69
32421 . . .$41.44
32422 . . .$31.94
32423 . . .$41.44
32424 . . .$42.99
32425 . . .$42.99
32426 . . .$42.99
32427 . . .$39.09
32428 . . .$39.09
32429 . . .$30.99
32430 . . .$33.44
32431 . . .$33.44
32432 . . .$32.69
32433 . . .$30.99
32434 . . .$32.69
32435 . . .$32.69
32436 . . .$30.99
32437 . . .$30.99
32438 . . .$30.99
32439 . . .$40.84
32440 . . .$39.94
32441 . . .$42.39
32442 . . .$34.29
32443 . . .$42.39
32444 . . .$33.44
32445 . . .$42.39
32446 . . .$34.29
32447 . . .$42.39
32448 . . .$34.29
32449 . . .$43.99
32450 . . .$33.44
Hand
Controls
Lighting
Size
1/4" x 5/8"
1/4" x 3/4"
1/4" x 7/8"
1/4" x 1"
1/4" x 11/4"
1/4" x 11/2"
1/4" x 13/4"
1/4" x 2"
1/4" x 21/4"
5/16" x 5/8"
5/16" x 3/4"
5/16" x 7/8"
5/16" x 1"
5/16" x 11/4"
5/16" x 11/2"
5/16" x 13/4"
5/16" x 2"
5/16" x 21/4"
3/8" x 3/4"
3/8" x 1"
3/8" x 11/4"
3/8" x 11/2"
3/8" x 13/4"
3/8" x 2"
Metal Parts Rack System
These heavy-duty racks are great for
organizing shop small-parts storage.
They’re ideally suited to holding the
hardware assortment trays sold by
Custom Chrome®. Each tray slides
completely out permitting unobstructed access to the assortment’s
contents.
32097 2-drawer rack . . . . . .$124.14
32098 4-drawer rack . . . . . .$176.19
Electrical
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
17.101
Cross
Reference
Chrome Long
Buttonhead Screws
Chrome-Plated
‘Grade 8’ Torx®
Buttonhead Screws
• Assortment contains 20 sizes of
UNC and UNF buttonhead screws
packs of each size (refill quantities listed below)
(fine and coarse –
200 pieces) . . . . . . . .$502.89
Part #
33381
33382
33383
33384
33385
33386
33387
33388
33389
33390
33391
33392
33393
33394
33395
33396
33397
33398
33399
33400
Size
Qty
8-32 x 1/2"
10 . .$27.39
8-32 x 5/8"
10 . .$27.39
10-24 x 1/2"
10 . .$27.39
10-32 x 1/4"
10 . .$27.39
10-32 x 1/2"
10 . .$27.39
1/4"-20 x 5/8" 10 . .$23.69
1/4"-20 x 3/4" 10 . .$23.69
1/4"-20 x 7/8" 10 . .$29.19
1/4"-20 x 1"
10 . .$29.19
1/4"-20 x 21/2"10 . . .$37.29
1/4"-28 x 1/2" 10 . .$29.19
1/4"-28 x 3/4" 10 . .$29.19
5/16"-18 x 1/2"10 . . .$29.19
5/16"-18 x 3/4"10 . . .$29.19
5/16"-18 x 1" 10 . .$32.19
5/16"-18 x 11/4"10 . .$43.59
5/16"-24 x 1/2"10 . . .$24.49
5/16"-24 x 1" 10 . .$29.19
3/8"-16 x 1"
10 . .$33.99
3/8"-16 x 11/4"10 . . .$33.99
Chrome-Plated
‘Grade 8’ Buttonhead
Sockethead Screws
• Assortment contains 24 sizes of
UNC and UNF buttonhead screws
240 pieces) . . . . . . . .$415.79
Part #
32301
32302
32303
32304
32305
32306
32307
32308
32309
32310
32311
32317
32318
32319
32312
32313
32314
32320
32321
32322
32315
32316
32323
32324
Size
8-32 x 1/2"
8-32 x 5/8"
8-32 x 3/4"
10-24 x 1/2"
10-32 x 1/2"
10-32 x 3/4"
10-32 x 1"
1/4"-20 x 5/8"
1/4"-20 x 3/4"
1/4"-20 x 7/8"
1/4"-20 x 1"
1/4"-28 x 1/2"
1/4"-28 x 3/4"
1/4"-28 x 1"
5/16"-18 x 1/2"
5/16"-18 x 3/4"
5/16"-18 x 1"
5/16"-24 x 3/8"
5/16"-24 x 1/2"
5/16"-24 x 1"
3/8"-16 x 3/4"
3/8"-16 x 1"
3/8"-24 x 3/4"
3/8"-24 x 1"
Qty
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Chrome-Plated
‘Grade 8’ Torx®
Sockethead Screws
• Assortment contains 24 sizes
of UNC and UNF screws with
smooth Torx® socketheads
32702 Smooth assortment
240 pieces) . . . . . . . .$501.49
. .$13.09
Part #
. .$13.09
32727
32728
32729
32730
32731
32732
32733
32734
32735
32736
32737
32738
32739
32740
32741
32742
32743
32744
32745
32746
32747
32748
32749
32750
. .$13.09
. .$13.39
. .$13.39
. .$13.39
. .$13.39
. .$13.69
. .$13.69
. .$13.69
. .$13.69
. .$13.69
. .$13.69
. .$13.69
. .$13.99
. .$13.99
. .$13.99
. .$13.99
. .$13.99
. .$13.99
. .$15.99
. .$15.99
. .$15.99
. .$15.99
Size
8-32 x 1/2"
8-32 x 5/8"
8-32 x 3/4"
10-24 x 1/2"
10-32 x 1/2"
10-32 x 3/4"
10-32 x 1"
1/4"-20 x 5/8"
1/4"-20 x 3/4"
1/4"-20 x 7/8"
1/4"-20 x 1"
1/4"-28 x 1/2"
1/4"-28 x 3/4"
1/4"-28 x 1"
5/16"-18 x 1/2"
5/16"-18 x 3/4"
5/16"-18 x 1"
5/16"-24 x 1/2"
5/16"-24 x 3/4"
5/16"-24 x 1"
3/8"-16 x 3/4"
3/8"-16 x 1"
3/8"-24 x 3/4"
3/8"-24 x 1"
Qty
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
. .$20.99
. .$21.09
. .$21.29
. .$21.39
. .$21.59
. .$21.89
. .$22.49
. .$27.89
. .$27.89
. .$28.79
. .$29.89
. .$21.89
. .$22.59
. .$23.29
. .$22.29
. .$28.79
. .$30.89
. .$23.29
Part #
. .$27.89
. .$24.19
. .$25.09
General
Hardware Trays
Heavy duty polycarbonate plastic hardware
organizers with snap tight lids. . . . . . . . .$9.99
14603 15 pocket
14604 12 pocket
Qty
• Compartmented assortment
trays include sizes and quantities of parts listed below
in individual packs of each size
(refill quantities listed)
32786
Complete
assortment . . . . .$458.99
32727
32787
32788
32789
32790
32791
32792
32793
32794
32795
32796
32797
32798
32799
32800
32801
32802
32803
32804
32805
32806
32807
32808
32809
32810
. .$23.29
Size
1/4"-20 x 11/4" 5 . . .$12.94
1/4"-20 x 11/2" 5 . . .$13.79
1/4"-20 x 13/4" 5 . . .$14.99
1/4"-20 x 2"
5 . . .$16.79
1/4"-20 x 21/2" 5 . . .$16.79
5/16"-18 x 11/4" 5 . . .$12.64
5/16"-18 x 11/2" 5 . . .$10.44
5/16"-18 x 2" 5 . . .$15.29
3/8"-16 x 11/4" 5 . . .$10.59
3/8"-16 x 11/2" 5 . . .$22.29
3/8"-16 x 13/4" 5 . . .$18.74
3/8"-16 x 2"
5 . . .$19.84
3/8"-16 x 21/4" 5 . . .$23.49
3/8"-16 x 21/2" 5 . . .$23.09
3/8"-16 x 23/4" 5 . . .$27.29
3/8"-16 x 3"
5 . . .$30.74
Chrome Countersunk
Sockethead Screws
. .$24.99
This satchel-style case is
molded from rugged
copolymer resins and features 15 removable
dividers so you can customize this case from
9 to 24 compartments.
Measures 15"-wide x
113/4" x 21/2" . . . . .$29.49
32099 Sold each
17.102
Part #
32051
32052
32053
32054
32055
32056
32057
32058
32059
32060
32061
32062
32063
32064
32065
32066
. .$24.19
Plastic 24-Pocket
Assortment Tray
17
• Compartmented assortment
trays include sizes and quantities of parts listed below
in individual packs of each size
(refill quantities listed)
32050 Complete
assortment $354.19
Size
Qty
8-32 x 1/2"
10 . .$20.99
8-32 x 1/2"
10 . .$20.59
8-32 x 5/8"
10 . .$20.59
8-32 x 3/4"
10 . .$21.19
10-24 x 1/2"
10 . .$21.19
10-24 x 3/4"
10 . .$21.19
10-32 x 3/8"
10 . .$21.19
10-32 x 1/2"
10 . .$21.19
10-32 x 3/4"
10 . .$21.49
1/4"-20 x 1/2" 10 . .$21.49
1/4"-20 x 5/8" 10 . .$21.49
1/4"-20 x 3/4" 10 . .$21.19
1/4"-20 x 1"
10 . .$21.19
1/4"-20 x 11/2" 10 . .$22.29
5/16"-18 x 1/2" 10 . .$24.29
5/16"-18 x 5/8" 10 . .$23.59
5/16"-18 x 3/4" 10 . .$24.29
5/16"-18 x 1" 10 . .$24.29
5/16"-18 x 11/4"10 . .$25.69
5/16"-24 x 5/8" 10 . .$26.09
5/16"-24 x 3/4" 10 . .$26.09
5/16"-24 x 1" 10 . .$26.59
3/8"-16 x 3/4" 10 . .$27.89
3/8"-16 x 1"
10 . .$28.29
3/8"-24 x 1"
10 . .$28.29
Custom Chrome®
Hardware Spinner Kits
Available for coarse thread and fine thread products. Includes assorted chrome acorn nuts, socketheads, nuts, buttonheads, washers and spacers.
Replacement hardware is available separately.
Spinner Kits
68000 Complete assortment (coarse) . . .$1,357.00
68200 Complete assortment (fine) . . . . .$1,242.00
Replacement Parts for Both Kits
Part #
Description
68029
68030
68031
68036
68037
68038
68039
68040
68041
68042
68043
68074
68075
68076
68077
68078
68079
68080
68081
68082
68083
68084
68085
68086
68087
68088
68089
68090
68091
Sockethead hole plug 1/4"
Lockwashers
#10
Lockwashers
1/4"
Lockwashers
5/16"
Lockwashers
3/8"
Flatwashers
#10
Flatwashers
1/4"
Flatwashers
5/16"
Flatwashers
3/8"
Steel Spacers
1/4" x 1/8"
Steel Spacers
1/4" x 1/4"
Steel Spacers
1/4" x 3/8"
Steel Spacers
1/4" x 1/2"
Steel Spacers
1/4" x 3/4"
Steel Spacers
1/4" x 1"
Steel Spacers
5/16" x 1/8"
Steel Spacers
5/16" x 1/4"
Steel Spacers
5/16" x 3/8"
Steel Spacers
5/16" x 1/2"
Steel Spacers
5/16" x 3/4"
Steel Spacers
5/16" x 1"
Steel Spacers
3/8" x 1/8"
Steel Spacers
3/8" x 1/4"
Steel Spacers
3/8" x 3/8"
Steel Spacers
3/8" x 1/2"
Steel Spacers
3/8" x 3/4"
Steel Spacers
3/8" x 1"
Size
Qty
10
10
10
4
4
4
4
4
4
4
4
2
2
2
2
1
1
2
2
2
2
1
1
2
2
2
2
1
1
Replacement Parts for Coarse Thread Kit
Part #
Description
Size
Qty
68001
68002
68003
68004
68005
68006
68007
68008
68009
68010
68011
68012
68013
68014
68015
68016
68017
68018
68019
68020
68021
68022
68023
68024
68025
68026
68027
68028
Acorn Nuts
Acorn Nuts
Acorn Nuts
Acorn Nuts
Acorn Nuts
Acorn Nuts
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
10-24
1/4"-20
5/16"-18
3/8"-16
7/16"-14
1/2"-13
1/4"-20 x 5/8"
1/4"-20 x 3/4"
1/4"-20 x 7/8"
1/4"-20 x 1"
1/4"-20 x 1.25"
1/4"-20 x 1.5"
1/4"-20 x 1.75"
1/4"-20 x 2"
5/16"-18 x 5/8"
5/16"-18 x 3/4"
5/16"-18 x 7/8"
5/16"-18 x 1"
5/16"-18 x 11/4"
5/16"-18 x 11/2"
5/16"-18 x 13/4"
5/16"-18 x 2"
3/8"-16 x 3/4"
3/8"-16 x 1"
3/8"-16 x 11/4"
3/8"-16 x 11/2"
3/8"-16 x 13/4"
3/8"-16 x 2"
4
4
4
2
2
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Replacement Parts for Coarse Kit (cont.)
Replacement Parts For Fine Kit (cont.)
Part #
Description
Size
Qty
Part #
Description
Size
Qty
68032
68033
68034
68035
68044
68045
68046
68047
68048
68049
68050
68051
68052
68053
68054
68114
68055
68056
68057
68058
68059
68060
68061
68062
68063
68064
68065
68066
68067
68068
68069
68070
68071
68072
68073
68092
68093
68094
68095
68096
68097
68098
68099
68100
68101
68102
68103
68104
68105
68106
68107
68108
68109
68110
68111
68112
68113
Hex Nut
Hex Nut
Hex Nut
Hex Nut
Bumper Bolt
Bumper Bolt
Bumper Bolt
Bumper Bolt
Bumper Bolt
Bumper Bolt
Bumper Bolt
Bumper Bolt
Bumper Bolt
Bumper Bolt
Bumper Bolt
Bumper Bolt
Nylok® Nuts
Nylok® Nuts
Nylok® Nuts
Nylok® Nuts
Nylok® Nuts
Nylok® Nuts
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
10-24
1/4"-20
5/16"-18
3/8"-16
1/4"-20 x 1"
1/4"-20 x 11/2"
1/4"-20 x 2"
5/16"-18 x 1"
5/16"-18 x 11/2"
5/16"-18 x 2"
3/8"-16 x 1"
3/8"-16 x 11/2"
3/8"-16 x 2"
7/16"-14 x 1"
7/16"-14 x 11/4"
7/16"-14 x 2"
10-24
1/4"-20
5/16"-18
3/8"-16
7/16"-14
1/2"-13
8-32 x 1/2"
8-32 x 5/8"
8-32 x 3/4"
10-24 x 1/2"
1/4"-20 x 5/8"
1/4"-20 x 3/4"
1/4"-20 x 7/8"
1/4"-20 x 1"
5/16"-18 x 1/2"
5/16"-18 x 3/4"
5/16"-18 x 1"
3/8"-16 x 3/4"
3/8"-16 x 1"
1/4"-20 x 5/8"
1/4"-20 x 3/4"
1/4"-20 x 7/8"
1/4"-20 x 1"
1/4"-20 x 11/4"
1/4"-20 x 11/2"
1/4"-20 x 13/4"
1/4"-20 x 2"
5/16"-18 x 5/8"
5/16"-18 x 3/4"
5/16"-18 x 7/8"
5/16"-18 x 1"
5/16"-18 x 11/4"
5/16"-18 x 11/2"
5/16"-18 x 13/4"
5/16"-18 x 2"
3/8"-16 x 3/4"
3/8"-16 x 1"
3/8"-16 x 11/4"
3/8"-16 x 11/2"
3/8"-16 x 13/4"
3/8"-16 x 2"
4
4
4
4
2
2
2
2
2
2
2
2
2
2
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
68207
68208
68209
68210
68211
68212
68213
68214
68215
68216
68217
68218
68219
68220
68221
68222
68223
68224
68225
68226
68227
68228
68229
68230
68231
68232
68285
68244
68245
68246
68247
68248
68249
68250
68251
68252
68253
68254
68255
68256
68257
68258
68259
68260
68261
68262
68263
68264
68265
68266
68267
68268
68269
68270
68271
68272
68273
68274
68275
68276
68277
68278
68279
68280
68281
68282
68283
68284
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Smooth Sockethead
Hex Nut
Hex Nut
Hex Nut
Hex Nut
Nylok® Nuts
Nylok® Nuts
Nylok® Nuts
Nylok® Nuts
Nylok® Nuts
Nylok® Nuts
Nylok® Nuts
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Buttonhead
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
1/4"-28 x 5/8"
1/4"-28 x 3/4"
1/4"-28 x 7/8"
1/4"-28 x 1"
1/4"-28 x 11/4"
1/4"-28 x 11/2"
1/4"-28 x 13/4"
1/4"-28 x 2"
5/16"-24 x 5/8"
5/16"-24 x 3/4"
5/16"-24 x 7/8"
5/16"-24 x 1"
5/16"-24 x 11/4"
5/16"-24 x 11/2"
5/16"-24 x 13/4"
5/16"-24 x 2"
3/8"-24 x 3/4"
3/8"-24 x 1"
3/8"-24 x 11/4"
3/8"-24 x 11/2"
3/8"-24 x 13/4"
3/8"-24 x 2"
10-32
1/4"-28
5/16"-24
3/8"-24
8-36
10-32
1/4"-28
5/16"-24
3/8"-24
7/16"-20
1/2"-20
8-36 x 1/2"
8-36 x 5/8"
8-36 x 3/4"
10-32 x 1/2"
1/4"-28 x 5/8"
1/4"-28 x 3/4"
1/4"-28 x 7/8"
1/4"-28 x 1"
5/16"-24 x 1/2"
5/16"-24 x 3/4"
5/16"-24 x 1"
3/8"-24 x 3/4"
3/8"-24 x 1"
1/4"-28 x 5/8"
1/4"-28 x 3/4"
1/4"-28 x 7/8"
1/4"-28 x 1"
1/4"-28 x 11/4"
1/4"-28 x 11/2"
1/4"-28 x 13/4"
1/4"-28 x 2"
5/16"-24 x 5/8"
5/16"-24 x 3/4"
5/16"-24 x 7/8"
5/16"-24 x 1"
5/16"-24 x 11/4"
5/16"-24 x 11/2"
5/16"-24 x 13/4"
5/16"-24 x 2"
3/8"-24 x 3/4"
3/8"-24 x 1"
3/8"-24 x 11/4"
3/8"-24 x 11/2"
3/8"-24 x 13/4"
3/8"-24 x 2"
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4
4
4
4
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Replacement Parts For Fine Thread Kit
Part #
Description
Size
Qty
68201
68202
68203
68204
68205
68206
Acorn Nuts
Acorn Nuts
Acorn Nuts
Acorn Nuts
Acorn Nuts
Acorn Nuts
10-32
1/4"-28
5/16"-24
3/8"-24
7/16"-20
1/2"-20
4
4
4
2
2
1
17.103
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Lighting
Electrical
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Forks
& Shocks
Sheetmetal
General
Cross
Reference
68300
Custom Chrome® Coarse Thread
Hardware Wall Display Kits
General
Point of purchase slat wall display kit comes
with one peg board, all pegs and 2 packages of
each piece of Custom Chrome’s most popular
chrome hardware. Available in a 35 piece or
70 piece kit. Sold each.
68290 35-piece wall display kit . . . . . . . . .$258.69
68300 70-piece wall display kit . . . . . . . . .$580.39
17
Replacement Parts of 35-Piece Display Kit
68002 Acorn Nuts
1/4"-20
68003 Acorn Nuts
5/16"-18
68004 Acorn Nuts
3/8"-16
68033 Hex Nuts
1/4"-20
68034 Hex Nuts
5/16"-18
68035 Hex Nuts
3/8"-16
68041 Flat Washers
1/4"
68042 Flat Washers
5/16"
68043 Flat Washers
3/8"
68056 Nylon-Inserted Hex Nuts 1/4"-20
68062 Buttonheads
8-32 x 5/8"
68063 Buttonheads
8-32 x 3/4"
68064 Buttonheads
10-24 x 1/2"
68066 Buttonheads
1/4"-20 x 3/4"
68067 Buttonheads
1/4"-20 x 7/8"
68068 Buttonheads
1/4"-20 x 1"
68076 Chrome Steel Spacers
1/4" x 3/8"
1/4" x 3/4"
5/16" x 3/8"
5/16" x 3/4"
3/8" x 3/8"
3/8" x 3/4"
68093 Hex Head Cap Screws
1/4"-20 x 3/4"
1/4"-20 x 1"
1/4"-20 x 11/2"
1/4"-20 x 2"
5/16-18 x 3/4"
5/16"-18 x 1"
5/16-18 x 11/2"
5/16"-18 x 2"
3/8"-16 x 1"
3/8"-16 x 11/2"
3/8"-16 x 2"
17.104
Replacement Parts of 70-Piece Display Kit
68002 Acorn Nuts
1/4"-20
68003 Acorn Nuts
5/16"-18
68004 Acorn Nuts
3/8"-16
68008 Smooth Sockethead
1/4"-20 x 3/4"
1/4"-20 x 1"
1/4"-20 x 11/2"
5/16-18 x 3/4"
5/16"-18 x 1"
5/16-18 x 11/2"
3/8"-16 x 3/4"
3/8"-16 x 1"
3/8"-16 x 11/2"
68029 Sockethead Hole Plugs
1/4" socket
5/16" socket
3/8" socket
68033 Hex Nuts
1/4"-20
68034 Hex Nuts
5/16"-18
68035 Hex Nuts
3/8"-16
68037 Lockwashers
1/4"
68038 Lockwashers
5/16"
68039 Lockwashers
3/8"
68041 Flatwashers
1/4"
68042 Flatwashers
5/16"
68043 Flatwashers
3/8"
68062 Buttonheads
8-32 x 5/8"
68063 Buttonheads
8-32 x 3/4"
68064 Buttonheads
10-24 x 1/2"
68066 Buttonheads
1/4"-20 x 3/4"
68067 Buttonheads
1/4"-20 x 7/8"
68068 Buttonheads
1/4"-20 x 1"
1/4" x 1/4"
1/4" x 3/8"
1/4" x 1/2"
1/4" x 3/4"
1/4" x 1"
5/16" x 1/4"
5/16" x 3/8"
5/16" x 1/2"
5/16" x 3/4"
5/16" x 1"
3/8" x 1/4"
3/8" x 3/8"
3/8" x 1/2"
3/8" x 3/4"
3/8" x 1"
1/4"-20 x 5/8"
1/4"-20 x 3/4"
1/4"-20 x 7/8"
1/4"-20 x 1"
1/4"-20 x 11/4"
1/4"-20 x 11/2"
1/4"-20 x 13/4"
1/4"-20 x 2"
5/16-18 x 5/8"
5/16-18 x 3/4"
5/16-18 x 7/8"
5/16"-18 x 1"
5/16-18 x 11/4"
5/16-18 x 11/2"
5/16-18 x 13/4"
5/16"-18 x 2"
3/8"-16 x 3/4"
3/8"-16 x 1"
3/8"-16 x 11/4"
3/8"-16 x 11/2"
3/8"-16 x 13/4"
3/8"-16 x 2"
Shown stacked
(These handy storage
cabinets are made from
heavy duty plastics and
interlock so you can stack
them vertically or
horizontally making them
even more convenient.)
501510
IDS™ Stackable Storage Cabinet
Ideal for use in anyone’s shop, these tough cabinets are perfect for storing all types of smaller
items. They are made from heavy duty copolymer which resists oil, gas, and common chemicals. The tough exterior is dent-proof and has a
scratch resistant textured finish that will stay
newer longer. Inside you’ll find five drawers
with snap down lids to store your stuff. Each
drawer has four rows and 16 dividers to place
where ever you want them. They can be placed
3mm apart for total customization. The entire
tray can be removed for added convenience.
The cabinets interlock so you can stack them as
high as you want. They are even wall mountable. Each cabinet measures 15.5" x 16" x 14.6"
(394mm x 394mm x 400mm) and weighs 19.3
lbs. (8.7 kg). Made in the USA.
501510 Sold each . . . . . . . . . . . . . . . . . . . . . . .$105.99
501511 Replacement divider box . . . . . . . . .$15.29
Service Manuals
Apparel
Bike Kits
& Trailers
440290
Seats
& Bags
6890419
6890428
6890421
6890430
Foot
Controls
Hand
Controls
400291
Lighting
6890422
Haynes™ Service Manuals
Comprehensive manuals written from hands-on experience to meet the
needs of the professional mechanic or owner enthusiast. Includes:
• Step-by-step procedures linked to hundreds of easy-to-follow photos
• Quick and easy troubleshooting sections
• Detailed wiring diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.99
440290 Big Twin models from 1970 thru 1991
440291 Sportster® models from 1970 thru 1990
Tech Tips & Tricks
from Easyriders
The editors of Easyriders have put
together a wide variety of performance and maintenance tips. There
are charts, reference material, and
time-saving tools and advice. Tech
Tips #1 was out of print but is
available again. Tech Tips #4 is the
latest edition . . . . . . . . . . . . . . .$14.99
26826 Tech Tips #1
26831 Tech Tips #2
26832 Tech Tips #3
26827 Tech Tips #4
6890420
6890429
Repair Manuals from Clymer
The most complete repair manuals available outside of the factory.
Presented in everyday, clear, straightforward language. Each of these 71/2" x
10" books packs everything from tips to complete wiring diagrams. Illustrated
with hundreds of photos, drawings and charts. Clear, easy-to-follow, step-bystep explanations.
6890423 For Twin Cam 88® Softail® models from 2000 thru 2003 . . . . .$39.95
6890421 For Evolution® Big Twin models with rigid-mounted
engines from 1984 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.50
6890430 For Twin Cam 88® Touring models from 1999 thru 2003 . . . . .$28.50
6890422 For Evolution® Big Twin models (except Dyna Glide models)
with rubber-mounted engines from 1984 thru 1994 . . . . . . . .$28.50
6890424 For Evolution® Dyna Glide models from 1991 thru 1998 . . . . .$28.50
6890425 For Twin Cam 88® Dyna Glide models from 1999 thru 2003 . .$28.50
6890420 For Shovelheads from 1966 thru 1984 . . . . . . . . . . . . . . . . . . . . . .$28.50
6890418 For Panheads from 1948 thru 1965 . . . . . . . . . . . . . . . . . . . . . . . . .$28.50
6890429 For 5-speed Evolution® Sportster® models from 1991
thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.50
6890428 For 4-speed Evolution® Sportster® models from 1986
thru 1990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.50
6890419 For Sportster® models from 1959 thru 1985 . . . . . . . . . . . . . . . . .$28.50
Electrical
Exhaust
Intake
Engine
Gaskets
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
How To Restore Your
Harley-Davidson® Motorcycle
By Bruce Palmer III. The most complete guide
available to restoring the most collectable
Harley® models. Illustrations detail each change
year-by-year. Covers Knuckleheads, Flatheads,
Servi-Cars, solos and Panheads (no Shovelheads
or Sportster® models). . . . . . . . . . . . . . . . . . . . .$39.99
440349 Softbound, 640 pages with 750 b&w
illustrations. 81/4" x 105/8".
Frames
Forks
& Shocks
Service Bulletins for
Harley-Davidson®
Motorcycles
440216 Volume I. Shop dope
technical series from
1912 thru 1929 . . . .$25.99
17.105
Sheetmetal
General
Cross
Reference
General
Parts & Service Manuals
Harley-Davidson®
Factory Parts Books
Harley-Davidson®
Factory Service Manuals
The same ones used by the franchise parts guys.
Accurate illustrations of every part. . . . . . .$76.99
75000 For 1987 thru 1990 1340 models
75001 For 1991 thru 1992 1340 models
75002 For 1993 thru 1994 1340 models
75003 For 1995 thru 1996 1340 models
75004 For 1941 thru 1984 4-speed FL models
75005 For 1971 thru 1984 4-speed FX models
75006 For 1985 thru 1986 4-speed FX models
75008 For 1984 thru 1986 FLT, FLHT models
75009 For 1982 thru 1983 FXR models
75010 For 1984 thru 1986 FXR models
75096 For Softail® models 1997 thru 1998
(repl. OEM 99455-98)
631735 For 1999 Softail® models
631731 For 1997 Dyna Glide models
75007 For 1980 thru 1983 FLT, FLHT models
75098 For FLT models 1997 thru 1998
(repl. OEM 99456-98)
631734 For 1999 FLT models
631746 For 2002 Touring models
631749 For 2002 V-Rod® models
75011 For 1964 thru 1978 Sportster® models
(repl. OEM 99451-98)
631736 For 1999 Sportster® models
The same manuals franchise dealers use to
repair bikes. Available in English only. . . . .$87.99
75017 For 1940 thru 1947 Big Twins
75018 For 1959 thru 1969 FL models
75019 For 1970-early 1978 FX/FL models
75020 For 1978 thru 1984 FX/FL models
75026 For 1985 thru 1990 Softail® models
75030 For 1991 thru 1992 Dyna Glide models
75021 For 1980 thru 1983 FXR/FLT models
75025 For 1995 thru 1996 FLT models
75093 For 1997 thru 1998 FLT models
17
17.106
Publications & Misc.
Bikers Atlas by American Bikers Guide
For anyone that attends events, the Bikers Atlas will provide you with a
complete listing of all major events nationwide throughout the entire
year.
• The latest edition with detailed information of over 400 events, rallies
and rides
• With over 100 maps that will guide you to all the action
• The event maps also feature popular places and attractions
• Provides over 3,000 business listings including every Harley-Davidson®
dealer in the country and thousands of aftermarket dealers.
• Features current U.S. Helmet Law map and U.S. Rally Locator
643909 Bikers Atlas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.95
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
Hand
Controls
Page 97 of Atlas featuring maps
and literature of the Sturgis Rally
Lighting
Electrical
Exhaust
Intake
RevTech® Performance 'Oil Change Center' Banner
Let your customers know your shop uses the finest lubricants available.
Banner is 62"-wide x 28"-tall and constructed of heavy duty vinyl with
metal grommets and nylon rope for hanging. Sold each.
606099 RevTech® 'Oil Change Center' banner . . . . . . . . . . . . . . . . . . . . . . . $49.99
Custom Chrome®
Sticker Sheet
Engine
Stickers neatly represent Custom
Chrome on glass, bumpers, helmets
and where ever else needs a little class.
One sheet includes 16 stickers in various sizes of Custom Chrome®, Santee®
Gaskets
and RevTech® printed on clear matte.
Sold each.
677017 Sticker Sheet . . . . . . . . . . . .$14.99
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
Frames
Unofficial
Flat Rate Manual
Improves repair and service estimates for yourself and your customers. Based on actual experience, not by guess work. No pictures, just 26 pages of valuable
information. Covers Big Twin and
Sportster® models. . . . . . . . . . .$12.49
440180 Unbound
Custom Chopper Cookbook
440173 The nuts and bolts of building custom
motorcycles . . . . . . . . . . . . . . . . . . . . .$19.99
Forks
& Shocks
Embroidered Toilet Seat
Sheet-
One bad ass gift idea. Biker toilet seat adds that distinct touch metal
of class to your rest facility. Made of black vinyl with an
embroidered eagle staring you in the eye, with the lid open
or closed. Cushy, padded seat cradles and caresses you.
Completely assembled with plastic attachment hardware
included. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99 General
37235 Complete seat
17.107
Cross
Reference
“How To” & Performance Publications
The Performance Pro Series by Crystal Publications
• For street rodders, racers, engine builders, tuners and novices
• Jam-packed with hard-to-find performance information
• Positively reviewed by Hot Bike, Hot Rod Bikes, American Rider, Iron
Works and Motorcycle Consumer News magazines
The Big Twin High-Performance Guide, Volume One
Ultimate Books by Motorbooks International
Before getting started on building your ultimate dream bike, it would be
wise for the builder to note pros and cons, right and wrong. These books
flourish with helpful information as well as photos that illustrate the latest.
Consists of great topics such as design and construction materials, triple
trees and fork tubes, shock absorbers, wheels and tires, electronics and
so much more!
‘How to Build A Chopper’
Detailed photos and tech descriptions guide you on all the steps to
build in the classic style. Guided by great bike builders such as Jesse James,
Arlen Ness and Donnie Smith. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.69
25748 Sold each
‘How to Build The Ultimate V-Twin Motorcycle’
Describes the pros and cons of various frame designs, engines, wheels
and sheetmetal. Contains professional advice to aid you in building that
dream bike. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49
25762 Sold each
‘How to Build The Ultimate V-Twin Chassis’
Like the V-Twin Motorcycle book, this one also describes pros and cons
and teaches drive train alignment, squaring the frame and going from
a bare frame to a rolling chassis with engine. . . . . . . . . . . . . . . . . . . . . . .$21.49
25783 Sold each
‘How to Restore Your Motorcycle’
Covers restoration on your engine, wheels, suspension, frames, tires,
brakes and bodywork. Contains illustrated guides, resource list
and bibliography. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.49
25755 Sold each
• Ultimate high-performance manual for Harley Davidsons
• Fully explains performance theories and proven engine combos
• Covers big-bore carbs, power cams & valvetrains, high compression,
high-flow exhausts, hot ignitions and pro tuning tips
24941 238 pages with 216 b&w photos and illustrations . . . . . . . . . . . .$29.99
The Big Twin High-Performance Guide, Volume Two
• Build a bulletproof bottom end for maximum performance and reliability
• Topics include performance fundamentals,
crankcase selection & prep, rod and crankshaft setup, bottom-end balancing, gearcase
how-to, oiling system mods, blueprinting
secrets, assembly tips & tricks and more!
624942 About 224 pages and 300 b&w photos
and illustrations . . . . . . . . . . . . . . . . .$35.99
The V-Twin Tuner’s Handbook,
Volume One
• Hardcore tech for engine designers, builders
& tuners, including pro engine design and
tuning secrets
• Covers essential theory, equations & reference
tables for maximizing performance
The V-Twin Tuner’s Handbook, Volume Two
• How to design and tune your Harley® for maximum performance
• Covers step-by-step engine design, optimized dyno-tuning, trackside
power tuning, flowbench science, engine simulation software, dyno
tested engine combos, Twin Cam 88® hop-up and more!
General
‘Ultimate American V-Twin Engine’
Shows you hop-up techniques for Evolution® and Twin Cam 88® engines.
Illustrations and descriptions cover popular upgrades and also installing
a Twin Cam 88® engine in an Evolution® frame. . . . . . . . . . . . . . . . . . . . .$22.79
25756 Sold each
‘The Harley-Davidson® Century’
The most comprehensive Harley-Davidson® history yet published!
Specific model series are covered by respected authorities on
each topic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99
25778 Sold each
‘Harley-Davidson®: Celebration of a Legend’
Visually-dynamic look at the first century of Harley-Davidson®
motorcycles. Reviews history, profiles of significant bikes and role in
popular culture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.49
25779 Sold each
17
17.108
How to Build A
Kit Bike
You can’t buy this much “custom” for any price! You must
build! Whatever your tastes or
budget, you can’t build anything better than HR3
Complete Kits. . . . . . . . . . . .$29.99
660101 Sold each
Performance Publications
Apparel
Bike Kits
& Trailers
Seats
& Bags
Foot
Controls
101 Performance Projects for
Harley-Davidson® Evolution®
Big Twin and Sportster® Models
By Kip Woodring and Kenna Love. This book
takes you step by step through 101 projects to
help get the most out of your bike. This is a
book created with the weekend mechanic in
mind. At the beginning of each project is an
outline of estimated time to complete the project, tools and parts needed, a cost estimate, a
rating of difficulty, a tech tip, the ultimate performance gain, and a complimentary modification. Filled with more than 350 color photographs and 50 charts and illustrations. . . .$29.99
24938 Softbound, 246 pages. 81/4" x 101/2"
Harley-Davidson® Sportster®
Performance Handbook
Hand
Controls
By Buzz Buzzelli. Get the most from your
Sportster®, from street tuning to full-out drag racing! The Sportster® is examined from 1957 to present, with details of its development and all the
important changes. . . . . . . . . . . . . . . . . . . . . . . .$29.99
440348 Softbound, 192 pages with 300 b&w
illustrations (measures 81/4" x 105/8")
Lighting
Electrical
Exhaust
Intake
Engine
Gaskets
How To Build
Harley-Davidson®
Horsepower
By Tom Murphy. This book offers
countless helpful tips in tearing down
and rebuilding Big Twin and Sportster®
engines, tranny trouble-shooting, forced
induction and nitrous oxide and suspension
modifications. It also has a list of performance
parts and services and racing
organizations. . . . . . . . . . . . . . . . . . . . . . . . . . .$21.99
440357 Softbound, 160 pages
Tranny
& Clutch
Driveline
Wheels,
Tires
& Brakes
The Sportster®/Buell® Engine Book
The book that teaches you the things you must
know, to build the ‘X’ - engine in your Sportster®
or Buell® the right way. . . . . . . . . . . . . . . . . . .$29.99
660102 Sold each
Frames
Forks
& Shocks
Sheetmetal
General
17.109
Cross
Reference

17 - Custom Bikes by Mike

Transcription

Similar documents

RAYPAK ILLUSTRATED PARTS LIST

060275_Wilners Jewelry.qxp

Where you come to know.

online catalog

See Audrey`s work for Bas Bleu here.

Mikuni Cruise Control

Gary L. Brandt, Faculty Northwest Indian College, gbrandt@nwic.edu

Illustrated Parts Catalog

Group Finder - WestwoodToday.com

Sheet - Silver Sounds Music