Auction Brochure - Thomas Industries

MAJOR ONSITE & WEBCAST AUCTION
FEATURING:
(11) CNC MACHINING CENTERS & TURNING CENTERS
• TOOLROOM • INSPECTION • PLANT SUPPORT
New
1998
Low
Hours
New
2005
New
2003
SUPERMAX #YCM-XV-1020A CNC VERTICAL
MACHINING CENTER
OKAMOTO #12-24ST
HYDRAULIC SURFACE
GRINDER
Very
Late
HARIG 6" X 12" SURFACE
GRINDER
New
2005
Low
Hours
New
1989
MOORE #G-18 JIG
GRINDER
New
2000
SUPERMAX #MAX-3 CNC VERTICAL
MACHINING CENTER
1 of 2
SUPERMAX #YCM-XV-560A CNC
VERTICAL MACHINING CENTER
Ultra-Clean CNC and Grinding Machinery
SALE SITE: Mutual Precision, Inc., 100 Doty Circle, West Springfield, Massachusetts
SALE DATE: TUESDAY, JULY 14, 10:30 AM (EDT)
Sale under Management of:
Thomas Industries, Inc.
2414 Boston Post Road, Guilford, CT 06437-2310
Phone (203) 458-0709 • Fax (203) 458-0727
email: gavel@thomasauction.com • www.thomasauction.com
CNC MACHINING CENTERS & TURNING CENTERS
Low
Hours
New
1989
FADAL #VMC-4020-HT CNC VERTICAL MACHINING CENTER
SUPERMAX #YCM-XV-1020A CNC VERTICAL MACHINING CENTER
CNC VERTICAL MACHINING CENTERS
(2) (New 2005) SuperMax #YCM-XV-560A CNC Vertical Machining Centers
W/ 16 1/2" x 27 1/2" Table, (20) Position ATC, #BT-40 Spindle, Tavels 18"-X,
16"-Y, 12"-Z, Coolant System W/ Skimmer, Full Enclosure and FANUC MXP200i CNC Controls, S/N 410609; 409583
(New 2003) SuperMax #YCM-XV-1020A CNC Vertical Machining Center W/
20 1/2" X 44" Table, (24) Position ATC, #BT-40 Spindle, Travels 40"-X, 20"-Y,
20"-Z, Full Enclosure, Auger Type Chip Conveyor and Coolant System W/
Skimmer, FANUC MXP-100i CNC Controls, S/N 309579
(New 2000) SuperMax #Max-3 CNC Vertical Machiing Center W/ 15 1/2" X
37" Table, (24) Position ATC, #BT-40 Spindle, Travels 34"-X, 17"-Y, 24.8"-Z,
Coolant System W/ Skimmer, Full Enclosure and FANUC OM CNC
Controls, S/N 0041092
(New 1997) SuperMax #Max-2 CNC Vertical Machining Center W/ 16 1/2" X
33" Table, (20) Position ATC, #BT-40 Spindle, Travels 24"-X, 16"-Y, X 19"-Z,
Coolant System, Full Enclosure, and FANUC OM CNC Controls, S/N
504005
(New 1989) Fadal #VMC-4020-HT CNC Vertical Machining Center, W/ 20" x
48" Table, (20) Position ATC, #BT-40 Spindle, Travels 40"-X, 20"-Y, 20"-Z,
Coolant System, Full Enclosure and Fadal 88 CNC Controls, S/N 8910692
(New 1988) SuperMax #MAX-1 CNC Vertical Machining Center W/ 13" x 36"
Table, (16) Position ATC, #BT-40 Spindle, Traels 24"-X, 16"-Y, 16"-Z, Coolant
System, Splash Guards and FANUC Om CNC Controls, S/N 809479
(New 1987) Hitachi-Seiki #VM-40 CNC Vertical Machining Center W/ 16" x
30" Table, (20) Position ATC, #BT-40 Spindle, Tavels 22"-X, 16"-Y, 16"-Z,
Coolant System, Full Enclosure, 6000 RPM and Seicos CNC Controls, S/N
VM40212SC
(New 1984) Shizuoka #Millmaster-B-5V CNC Vertical Machining Center W/
13" X 35" Table, (30) Position ATC, 5,000 RPM, #BT-40 Spindle, Travels 26"-X,
16"-Y, 18"-Z, Coolant System and FANUC 6MB CNC Controls, S/N 64214
2
3.15"
SPINDLE
HOLE
New
1998
OKUMA #CROWN BIG BORE CNC LATHE with
OKUMA CNC CONTROLS / OKUMA CNC LATHE
INTERIOR VIEW
CNC LATHES
(New 1999) Okuma # 762S-BB
"Crown" Big Bore CNC Lathe
W/ Kitagawa 10" Hydraulic
Chuck, 21.65" Swing over Bed,
15.75" Swing Over Cross-Slide,
10.63" Max. Turning Diameter,
Max. Turning Length 20.47",
Spindle Bore 3.15", Spindle
Speeds 65-3500 RPM,Tooleye,
(12) Position Turret, Tailstock,
Chip Conveyor and Okuma
#OSP-700L CNC Controls, S/N
0756
C O M P L ET E LO T C ATA LO G & P H O T O S AT : W W W. T H O M A S A U C T I O N . C O M
SALE DATE: TUESDAY, JULY 14, 10:30 AM (EDT)
Fanuc
OM
Control
HITACHI-SEIKI #VM-40 CNC VERTICAL MACHINING
CENTER
SHIZUOKA #MILLMASTER B-5V CNC VERTICAL
MACHINING CENTER
COORDINATE MEASURING
MACHINE
(New 2005) Brown & Sharpe # TESAMicro-Hite-3D Coordinate
Measuring Machine W/ 22" X 19
1/2" Table and #MH-3D controls
w/ Reflex Software, S/N 04110025
Brown & Sharpe #Validator
Coordinate Measuring Machine
W/ 18" X 24" Table, S/N 087200
MILLERS, CNC
(New 1996) SWI-TRAK #DPM CNC
Bed Type Miller W/ 10" X 50"
Table, #40 Taper Spindle, 70-4200
RPM, Power Draw Bar, Spray Mist
Coolant and TRAK-AGE-3 CNC
Control, S/N 96-2420
(New 1996) Bridgeport 2 HP Series I
Vertical Miller W/ Power Draw
Bar, 9" X 48" Table, 12" Knee,
Spray Mist Coolant and ProtoTRAK-MX2 CNC Control, S/N
271545
SUPERMAX #MAX-1 CNC VERTICAL MACHINING
CENTER
VERTICAL MILLERS
Bridgeport 2 HP Series I Vertical
Milling Machine W/ 9" X 48"
Table, 12" Knee, and ACU-RITE III
DRO, S/N 238274
Bridgeport 2 HP Series I Vertical
Milling Machine W/ 9" X 42"
Table, 12" Knee and ACU-RITE II
DRO, S/N 187784
(2) SuperMax #YCM 1 1/2 V Vertical
Milling Machine W/ 9" X 42"
Table, 12" Knee and ACU-RITE III
DRO, S/N 80919550 & 80619192
Kearney & Trecker #10HP-2CK
Heavy Duty Vertical Miller W/ 13
1/2" x 56" Table, #50 Taper
Spindle, 15-1500 RPM and 10 HP,
S/N 1-7375
New
1997
SUPERMAX #MAX-2 CNC
VERTICAL MACHINING CENTER
EDWARDS #1440 ENGINE LATHE
HORIZONTAL MILLER
Milwaukee # 3H "Universal" Heavy
Duty Horizontal Miller W/ 13 1/2" X
64" Table, #50 Taper Spindle, 202000 RPM and Vertical Milling
Head Attachment, S/N 9-5506
New
1996
HARRISON #M-350 ENGINE LATHE
C N C
•
T O O L R O O M
•
I N S P E C T I O N
•
P L A N T
S U P P O R T
3
SALE TO BE CONDUCTED LIVE ONSITE & WEBCAST
New
1997
DO-ALL C-916A AUTOMATIC BANDSAW
New
1997
OVERVIEW OF RAW MATERIAL
Very
Low Hours
BRIDGEPORT-HARIG
#EZ-SURF CNC GRINDER
OKAMOTO #ACCUGAR-124N
HYDRAULIC GRINDER
JIG GRINDERS
Like
New
SURFACE GRINDERS, HYDRAULIC
300+
Available
#BT-40 CNC TOOLHOLDERS
(New 1980) Moore #1 1/2 Jig Borer
W/ 11" X 20" Table, S/N J-920
ENGINE LATHES
(New 1997) Harrison #M-350 Engine
Lathe W/ 17" X 40" Cap, #D-1-8
Cam-Lock Spindle, Taper
Attachment, 2.137" Spindle Hole,
40-2200 RPM and FAGOR DRO,
S/N 351515-1503
Edwards #1440 Engine Lathe W/ 14"
X 40" Cap, #D-1-6 Cam-Lock
Spindle, 35-2000 RPM and Trav-ADial, S/N 6012
D AT E :
NOVA VIBRATORY
FINISH MACHINE
(New 1997) Harig #618 EZ-Surf CNC
Surface Grinder, W/ Walker 6" x
18" Magnetic Chuck and
Bridgeport 2-Axis Programmable
Control S/N 165-EZ
JIG BORER
S A L E
CLARK 2500 LB
ELECTRIC FORKLIFT
SURFACE GRINDERS, CNC
(New 1986) Moore #G-18 Jig
Grinder W/ 11" X 24" Table and
Sony DRO, S/N G-3477
Moore #3 Jig Grinder W/ 11" X 24"
Table and Acu-Rite DRO, S/N G249
Moore Tool Cabinet, Moore
Grinding Heads, Moore Vise,
Moore Strap Sets
4
SEA CONTAINER STORAGE SHED
(New 1998) Okamoto ACC #1224ST Hydraulic Surface Grinder
W/ 12" X 24" Electro-Magnetic
Chuck, Coolant System W/
paper Filtration and Splash
Guards, S/N 83153
Okamoto #ACCUGAR-124N
Hydraulic Surface Grinder W/ 12"
X 24" Electro-Magnetic Chuck,
Coolant System and
Splash Guards S/N 6429
T U E S D AY,
(300) #BT-40
TOOLHOLDERS
(30) VISES
AVAILABLE
SAMPLE OF #BT-40 TOOLING & KURT VISES
J U LY
1 4 ,
1 0 : 3 0
A M
( E D T )
TREMENDOUS AMOUNT OF NEW CARBIDE
& HIGH SPEED CUTTING TOOLS
1 of 2
Like
New
LARGE QUANTITY OF MACHINE ACCESSORIES
LARGE QUANTITY OF INSPECTION TOOLING
DUSTKOP DUST COLLECTOR BRIDGEPORT 2 HP SERIES
I MILLING MACHINE
New
1996
New
2005
BRIDGEPORT
2 HP MILLER
W/ PROTOTRAK CNC
CONTROL
3-Axis
SUNNEN HONING MACHINE
K & T MILWUAKEE HEAVY DUTY
VERTICAL MILLER
BROWN & SHARPE #TESA 3-D COORDINATE MEASURING MACHINE
SURFACE GRINDERS
(New 2005) Harig #612 Surface
Grinder W/ Walker Magnetic
Chuck, S/N 21206
Accu-Finish #AE-841 Carbide
Grinder
(New 2004) Harig #612 Surface
Grinder W/ Walker Magnetic
Chuck, S/N 20311
Kalamazoo 6" Heavy Duty Belt
Grinder
Covel 6" X 18" Surface GrinderW/
Magnetic Chuck, S/N 10-780
(3) Dayton 8" Double End Grinders
Harig #Super 612 Surface Grinder
W/ Magnetic Chuck S/N 13910
Rockwell 6" Double End Grinder
SAWS
(New 1997) Do-All #C-916A
"Automatic" Horizontal Bandsaw
W/ 9" X 16" Cap, 1" Blade, AutoFeed Conveyor, Coolant System
and Digital Counter Controls, S/N
528-97277
(New 1982) W.F. Wells #W-9
Horizontal Bandsaw W/ 1" Blade,
Hydraulic Controls and Coolant,
S/N 823779
HONING MACHINE
Sunnen #MBB-1660 Honing
Machine, S/N 83221
Large Assortment of
Sunnen Tooling
AIR COMPRESSORS &
DRYER
(New 1997) Ingersoll Rand
#SSR-EP15SE Air
Compressor 15 HP, S/N
KE4370U97083
Ingersoll Rand #15H-SP Air
Compressor W/ New
Tank, 15 HP, S/N K0117V84A
Zeks #Heat Sink Tru Cycling
Air Dryer
OPTICAL COMPARATOR
New
1980
MOORE 1 1/2 JIG BORER
MOORE #3 JIG GRINDER
SUPERMAX
MILLING
MACHINE
Mitutoyo #PH-350 Optical
Comparator W/ 14"
Screen, Surf Illumination,
6" X 16" Micrometer
Table, 10X Lens, S/N
C O M P L E T E L O T C ATA L O G & P H O T O S AT : W W W. T H O M A S A U C T I O N . C O M
5
LARGE QUANTITIES OF LIKE NEW TOOLING
& MACHINE ACCESSORIES
New
1997
New
1996
New
Tank 2007
3-Axis
KALAMAZOO 6" BELT SANDER
INGERSOLL-RAND 15 HP AIR
COMPRESSOR
INGERSOLL-RAND 15 HP AIR
COMPRESSOR
ZEKS #HEAT SINK AIR DRYER
SWI-TRAK #DPM CNC MILLING
MACHINE
PORTABLE PARTS CART 5
AVAILABLE
VIEW OF INSPECTION
TOOLING
HARDNESS TESTER
NORCO HYDRAULIC SHOP
PRESS
MOORE TOOLMAKERS CABINET
FORKLIFT
TOOLING
PLANT SUPPORT
Clark #TM-15S Electric Forklift W/
2500 Lb Cap, 170" Lift Height,
Triple Mast, Solid Tires and Battery
Charger, S/N TM127-0089-4900FA
FIE #R Hardness Tester S/N 2196
(3) Starrett 24" X 36" Pink Granite
Surface Plates W/ Cart
48" X 70" Granite Surface Plate
Large Quantity of Mitutoyo &
Brown & Sharpe Intra-Mikes
Sunnen, Mitutoyo, Gage Blocks,
Micrometers, Bore Gages, Pin
Gages, Ring Gages, Mitutoyo
Surf Indicator, Height Gages,
Deltronic Pin Gages, Etc.
A & B Tool Motorized 5C Indexer
YUASA #550-008 8" Super Indexer
Cushman 8" Air Flash Indexer
(300+) #BT-40 CNC Toolholders
(6) Tool Setters, Flex Collets,
Carbide Endmills & Drills, Boring
Bars, Carbide Inserts, Aloris
Toolposts & Holders, Bridgeport
Right Angle Heads, Milling
Cutters, R-8 Collets, Radius Angle
Wheel Dressers
Nova #1000 Vibratory Finish
Machine-(2) Dustkop Dust Collectors
(New 2005)- Taft-Pierce 10" X 24"
Bench Center- Lassey Tapping
Machine-Baystate Tapping Machine(6) 18" X 24" Rock of Ages 2-Ledge
Granite Surface Plates- Norco 20 Ton
Hydarulic Shop Press- Evansville #1
Arbor Press- TECO Machine Strap
Sets-Darex Drill Sharpener S/N 53575
Rockwell 1" Belt Sander W/ CartIndustrial Magnetics DemagnitizerBridgeport Sine Table-(5) Basnik 4-Tier
Heavy Duty Parts Carts- Rotary
Tables-Shelving- Rack ShelvingCarts- (6) HUOT CNC Tool Carts &
Racks- (15) Wood Top Work Benches22' Sea Container Storage ShedHand Truck- Large Quantity of
Rubber Shop Mats
VISES
(30) 6" Kurt #3600V Milling Vises
8" Kurt Machine Vise
6
RAW MATERIAL
Large Assortment of Raw Material,
Aluminum, Steel and Stainless
Steel W/ Racks
SALE TO BE CONDUCTED LIVE ONSITE & WEBCAST
AUCTION INFORMATION
MAJOR ONSITE & WEBCAST AUCTION
TO BE CONDUCTED LIVE ONSITE AND WEBCAST
AUCTION SITE
Mutual Precision, Inc.,
100 Doty Circle
West Springfield, Massachusetts
SALE DATE
Tuesday, July 14, 10:30 AM (EDT)
INSPECTION
Monday, July 13, 9 -4 PM (EDT)
REMOVAL: No Later Than Friday, July 24
BUYER’S PREMIUM
12.5% Onsite & 15.5 % Webcast
WEBCAST BIDDING AVAILABLE:
Onsite Registration – Payment Terms
In order to obtain a bid paddle a
$100.00 refundable fee is due at time
of registration. Payment terms: A 25%
deposit due day of sale, payment in full
within 24 hours, by cash, certified
check or wire transfer (we do not
accept credit cards). Company or
personal checks will only be accepted
if accompanied by a bank letter, subject to Thomas’ approval guaranteeing
unqualified payment to Auctioneer.
Any and all checks must be drawn on
a United States Bank in US Funds. All
purchases are subject to applicable
federal, state and local taxes unless
auctioneer is provided with a valid
sales tax exemption certificate.
Sales & Use Tax:
All purchases are subject to applicable federal, state and local taxes
unless auctioneer is provided with a
valid sales tax exemption certificate.
Proxy Bids
If you are unable to participate in this
sale Proxy Bids are accepted. Proxy
bids may be submitted online directly
from the lot catalog or call (203) 4580709 for a proxy bid form.
REMOVAL DATE:
Webcast Registration - Payment Terms
All Internet bidders wishing to bid offsite will be required to register with
www.bidspotter.com. All successful
internet bidders will be invoiced within
24-hours following the auction sale by
email, with payment instructions.
Payment is due in full within 48-hours
of receipt of your emailed invoice , by
cash, certified check or wire transfer
(we do not accept credit cards).
Representation of Equipment
All items are sold As Is - Where Is with
all faults. The Auctioneer expressly disclaims any warranty of merchantability or fitness for a particular purpose. It
is the bidders’ sole responsibility to
examine or inspect items prior to
placing their bids.
Disclaimer: Please Note Items Offered
May Be Subject To Prior Sale.
Auctioneer is not responsible for errors,
omissions, additions or deletions.
Items offered may not necessarily be
sold as described and/or photographed. Buyers should verify all
aspects of their potential purchases
during inspection as all items offered
will be sold “as is, where is” with all
faults. Please check with the auctioneer’s office for additions or deletions.
UPCOMING AUCTION
AUGUST 4TH
LATE MODEL AMADA
FABRICATING EQUIPMENT
SMTC CORP.
FRANKLIN, MASS.
150,000 SF FACILITY
• AMADA CNC TURRET PUNCH
#EMK-3610-NT (NEW 2008)
• AMADA CNC TURRET PUNCH
#PEGA-358-S (NEW 2000)
• AMADA CNC LASER
#LC-1212-A2, 1500 WATT
• (5) AMADA 8-AXIS CNC
PRESS BRAKES (NEW 2000)
• INSERTERS • TIME SAVERS
• TOOL ROOM • PLANT SUPPORT
• OVER 1200 LOTS
THOMAS INDUSTRIES
APPRAISAL DIVISION
Accurate appraisals
supported by over 56
years of conducting
worldwide auctions
and liquidations.
Call (203) 458-0709 for
a confidential appraisal
of your assets. One piece
of equipment or
an entire plant.
THOMAS INDUSTRIES
2414 Boston Post Road
Guilford, CT 06437-2310
(203) 458-0709 • (203) 458-0727 Fax
http://www.thomasauction.com
PLEASE NOTE ALL EQUIPMENT MUST BE REMOVED NO LATER THAN JULY 24TH , NO EXCEPTIONS 7
Under Management of:
THOMAS INDUSTRIES
2414 Boston Post Road
Guilford, CT 06437-2310
(203) 458-0709 • (203) 458-0727 Fax
http://www.thomasauction.com
PRESORTED FIRST
CLASS MAIL
U.S. POSTAGE
PAID
Permit No. 80
Milford, CT
MAJOR ONSITE &
WEBCAST AUCTION
Mutual Precision, Inc.
FORWARDING SERVICE REQUESTED
FEATURING:
(11) CNC MACHINING CENTERS &
TURNING CENTERS • TOOLROOM
• INSPECTION • PLANT SUPPORT
SALE DATE Tuesday, July 14, 10:30 AM (EDT)
INSPECTION Monday, July 13, 9-4 PM (EDT)
AUCTION SITE
Mutual Precision, Inc.,
100 Doty Circle
West Springfield, Massachusetts
MUTUAL PRECISION BUILDING AVAILABLE FOR SALE
CONTACT: Kevin M. Jennings
Jennings Real Estate Services, Inc.
73 Chestnut Street, Springfield, MA 01103
413.731.7770 (ph)