our entire catalogue

By HighGear Specialties‚ Inc.
• GPS
• Radar Detectors
• Toll Transponder
• Cell Phones
• Audio/ Video
Equipment
• and more
2005
Mounting
Systems and
Accessories
MADE IN THE
U .S . A .
Developing quality motorcycle products and accessories since 199 5
CONTENTS
StemMounts . . . . . . . .2
HandlebarMounts . . . . . .3 - 4
1
MirrorMounts . . . . . . . .5
ControlMounts . . . . . . . .6
FairingMounts . . . . . . . .7
SpecialtyMounts . . .8 - 9 -10
LightMounts . . . . . . .11
AccessoriesTop Plates . . . . . . .12
Accessories . . . . . . .13
2
3
4
5
6
All TECHMOUNT brand-mounting systems
are designed and manufactured by HighGear
Specialties, Inc. in Oakland, Florida.
We have been developing quality motorcycle
products and accessories since 1995. Every
employee at HighGear is a motorcycle
enthusiast and motorcycle owner. We feel
this translates into pride, craftsmanship and
attention to detail in our products.
All of our accessory mounting systems
are machined from T6 6061 aluminum to
precise tolerances then plated with a durable
anodize or chrome finish. All hardware used
is stainless steel.
Feel free to call us with any questions or
comments. We appreciate hearing from
our customers.
7
1. Garmin Street Pilot III GPS
mounted on 30997MC Handlebar
mount with 60991C GPS/ XM
Radio Accessory top.
2. Garmin 12 map handheld GPS
on a 30997C Handlebar mount.
3. Radar detector on a 10997
Stem mount.
4. Cell Phone on a 10991
8
9
Stem mount.
5. Two-way radio on a 30997C
Handlebar mount.
6. PIAA 1100XX lights mounted
with a 51001 Light mount.
7. PIAA 1400X fog lamp mounted
with a 51001 Light mount.
8. Valentine 1 radar detector
10
11
on a 30997C Handlebar mount.
9. PDA mounted with a 30997MC
Handlebar mount.
10. Change holder on a 30997MC
Handlebar mount.
11. Garage door opener mounted
with a 10997 Stem mount.
StemMounts
Part # 10991
Stem Mount systems fit snugly
into the hole in your sport bikes
steering head, utilizing a series
of O- rings that get progressively
tighter as the mount is pushed
into the hollow stem hole.
Once installed this system
provides a secure centrally
located mounting location. The
top plate angle and shaft height
are adjustable to suit a variety of
accessories. There are no tools
needed for installation. Fits most
popular Japanese
and European
sport bikes.
Part # 10997D shown above
Available colors:
Black
Blue
Red
Silver
Gold
Chrome
Specifications:
Standard Top Plate: 3" x 2.25". Standard Shaft: 3.5”
Tall Shaft: 4.5”
Mini Shaft: 1.5”
StemMount
Tall
StemMount
DoubleTop
(Exspansion
nut base)
Stem Hole Sizes: 13mm, 15mm, 16mm, 17mm, 18mm,
19mm, 28mm
Top Plate Range of Movement: 180 deg.
Shaft Range of Movement: Front to back 180 deg.
Part # 40001
Part # 10997D
Max / Min Height: Standard 4.25” / 1.0” (from stem nut )
Weight: 6 ounces
Toll free: 866. 341.4192
info @ techmounts.com
techmounts.com
Kit Includes: Velcro, extra o-rings, installation instructions
2
HandlebarMounts
Part # 30996
Handlebar Mount systems are
universal clamp systems designed
for round tube handlebars from
7/8" thru 1-1/2” in diameter that
require only 1/2” of handlebar
space. The ball and socket
design used on these mounts
allow a wide range of movement
making installation
at complex angles possible.
Part # 30996 shown above
Specifications:
Standard Top Plate: 3" x 2.25"
Standard Shaft: 3.5”
Tall Shaft: 4.5”
Mini Shaft: 1.5”
Handlebar Sizes: 7/8”, 1”, 1-1/8”, 1-1/4”, 1-1/2”
Handlebar Mount
Mini
Black
Handlebar Mount
Mini
Silver
3
Handlebar
Mount
Standard
Handlebar
Mount
DoubleTop
Tall Shaft
Silver
Black or
Silver
Part # 30996M
Part # 30996
Part # 30996M
Part # 30996TD
Top Plate Range of Movement: 360 deg.
Shaft Range of Movement: Front to back 180 deg.
Toll free: 866. 341.4192
info @ techmounts.com
techmounts.com
Max /Min Height: Standard 4.25”/ 1.0” (from bar)
Weight: 6 ounces
Kit Includes: Velcro, installation instructions and tools
Available Colors: Black and Silver
HandlebarMounts Chrome
Part # 30997C
The top plate can be rotated 360
degrees, as well as offset left,
right or center. All of this
adjustability makes these one
of our most popular systems.
Part # 30997MC shown above
Specifications:
Standard Top Plate: 3" x 2.25"
Standard Shaft: 3.5”
Tall Shaft: 4.5”
Mini Shaft: 1.5”
Handlebar Sizes: 7/8”, 1”, 1-1/8”, 1-1/4”, 1-1/2”
Top Plate Range of Movement: 360 deg.
Handlebar Mount
Mini
Shaft Range of Movement: Front to back 180 deg.
Max /Min Height: Standard 4.25”/ 1.0” (from bar)
Weight: 6 ounces
Kit Includes: Velcro, installation instructions and tools
Available Colors: Chrome
Part # 30997MC
Toll free: 866. 341.4192
info @ techmounts.com
techmounts.com
Part # 30999C
4
MirrorMounts
Part # 31000L
Mirror Mount systems take
advantage of the unused threaded
mirror hole found on many Japanese
and European motorcycles. The
Mirror Mounts have all of the
adjustability and range of movement
of the handlebar mount systems.
Simply thread the mounts into the
holes on the handlebars originally
designed for mirrors. A good
alternative for motorcycles with
non-circular or limited bar space.
Part # 31000L shown above
Specifications:
Standard Top Plate: 3" x 2.25".
Standard Shaft: 3.5”
Tall Shaft: 4.5”
Mini Shaft: 1.5”
Mirror Hole Size: 10mm X 1.25 (right or left hand thread pitch)
Top Plate Range of Movement: 360 deg.
Shaft Range of Movement: Front to back 180 deg.
Max / Min Height: Standard 4.25” / 1.0” (from bar)
5
Weight: 6 ounces
Kit Includes: Velcro, installation instructions and tools
Available Colors: Black
Toll free: 866. 341.4192
info @ techmounts.com
techmounts.com
ControlMounts
Part # 31000
Control Mount systems fit widest
range of metric motorcycles.
These systems were designed
to mount onto the handlebar
control pinch bolts (clutch or
brake side). This mounting
location can be used on
motorcycles with closed or open
steering stems, no available
handlebar space and no available
mirror mount locations.
As long as the motorcycle has
two pinch bolts on the handlebar
controls this system can be used.
Range of movement and
adjustability are the same as
all ball and socket systems.
Part # 31000 shown above
Specifications:
Standard Top Plate: 3" x 2.25"
Standard Shaft: 3.5”
Tall Shaft: 4.5”
Mini Shaft: 1.5”
Control Bolt Size: 6mm X 1.00 (right hand thread pitch), 20 to 30 mm in length
Top Plate Range of Movement: 360 deg.
Shaft Range of Movement: Front to back 180 deg.
Max /Min Height: Standard 4.25”/ 1.0” (from bar)
Weight: 6 ounces
Kit Includes: Velcro, installation instructions and tools
Available Colors: Black
Toll free: 866. 341.4192
info @ techmounts.com
techmounts.com
6
FairingMounts
Part # 20992
Fairing Mounts systems are
recommended for sport
motorcycles when the highest,
most visible mounting location is
desired. Also this system provides
the most weather and wind
protection. Installation is simple.
Just remove one of the factory
10mm nuts on the inside of the
fairing support and thread the hex
shaped base onto the exposed
stud. This style mount remains
stationary when the handlebars
are turned.
** Not recommended for large
GPS or camcorders.
Part # 20992 shown above
Specifications:
Standard Top Plate: 3" x 2.25".
Standard Shaft: 4.5”
Fairing Bolt Size: 6mm X 1.00 (right hand thread pitch), 10 to 15 mm in length
Top Plate Range of Movement: 360 deg.
Shaft Range of Movement: Front to back 100 deg.
Max/ Min. Height: Standard 3.25” / 0.0” (from level)
Weight: 6 ounces
Kit Includes: Velcro, installation instructions and tools
7
Available Colors: Black
Toll free: 866. 341.4192
info @ techmounts.com
techmounts.com
SpecialtyMounts Yamaha FJR-1300
Part # 10998
This is a Stem Mount system
with a replacement stem nut
instead of the o-ring post used
on other Stem Mounts. These
mounts have all the same
features and adjustability as
any Stem Mount system.
The replacement stem nut is
machined from 6061 T6
aluminum and anodized to
match the original equipment.
Part # 10998 shown above
Specifications:
Standard Top Plate: 3" x 2.25"
Standard Shaft: 3.5”
Tall Shaft: 4.5”
Mini Shaft: 1.5”
Stem Bolt Sizes: 27mm x 1.0 thread pitch
Top Plate Range of Movement: 180 deg.
Shaft Range of Movement: Front to back 180 deg.
Max/ Min. Height : Standard 4.25” / 1.0” (from stem nut)
Weight: 7 ounces
Kit Includes: Velcro, installation instructions and tools
Available Colors: Silver
Part # 10998D
Toll free: 866. 341.4192
info @ techmounts.com
techmounts.com
8
• GPS
• Radar Detectors
• Toll Transponder
• Cell Phones
• Audio/ Video
Equipment
• and more
Part # Z6190 shown above
Mounting systems specially designed for BMW motorcycles
Handlebar
Mount
Mini
Handlebar
Mount
Mini
Handlebar
Mount
9
Color: Black
Fits: 7/8 inch
handlebars
Part # Z6190
Color: Chrome
Fits: 1 1/8 inch
handlebars
Part # Z6110
Color: Black
Fits: 7/8 inch
handlebars
Part # Z6192
SpecialtyMounts BMW
Fork Cap
Mount
K- Mount
Color: Black
Fits: BMW - K1200RS
• K1200GT
• 2001 and Later
BMW
Mirror
Mount
Color: Black
Fits: BMW- K1200LT
• R1150RT• R1100S
2001 and Later
Mounts on to the
fairing support on
a BMW K - bike.
Part # Z6120
Color: Black
Fits: R1100RS ’96
and Later
R1150RS - All
R1100S ’96
and Later
BMW Mirror Mount
mounts into the
unused mirror hole.
Part # Z6140
Part # Z6100
Mounting systems specially designed for BMW motorcycles
GPS/XM Radio
AccessoryTop
WidePlate
Accessory Top
DoubleTop
Handlebar
Mount
Tall Shaft
10
Color: Black
Fits: 7/8 inch
handlebars
Part # Z6191
Color: Black
Fits: all mounts
Except Double Mounts
Color: Black
Fits: All mounting systems
Part # Z6201
Part # Z6200
Toll free: 866. 341.4192
info @ techmounts.com
techmounts.com
LightMounts
Part # 51001
Light Mount systems are designed
for specific applications, our light
mount systems make adding
additional lights to your motorcycle
simple and clean. Our goal is to
give your PIAA accessory lights
a factory installed look.
Our Chrome Bar clamps are
designed to securely clamp onto
the 1-1/4” round tube engine
guards found on most Standard
and Metric cruisers today.
Part # 51001 mounted with PIAA 1400X shown above
Specifications:
Designed for PIAA 1400X and 1100XX lamps
(as shown above)
Bar Size: 1-1/4” round tube
Range of Movement : 360 deg.
Weight: 3 ounces
Kit Includes: installation instructions and tools
11
Available Colors: Chrome and Black
Part # 51003
Part # 51003 mounted with PIAA 004XT
and 540 Lamps
Toll free: 866. 341.4192
info @ techmounts.com
techmounts.com
AccessoriesTopPlates
Part # 60991
GPS / XM Radio Kit : A
small top plate measuring
just 2.25” x 2.5” with (4) four
rubber bushings designed
to add a level of vibration
damping to aid in the
mounting of sensitive
electronic devices.
The AMPS four hole bolt
pattern used in this plate,
is an industry standard
bolt pattern used by
Garmin GPS and Delphi
XM Radio for their
manufacturer supplied
mounting cradles. This kit
includes (3) three sets of
stainless mounting screws,
in sizes most commonly
used for GPS and XM
radio mounting cradles.
Part # 30997MC mounted with GPS/XM top shown above
Part # 60001/60002
Standard Top Plate: Replacement top plate that come standard on
all Techmounts. A good choice for a variety of small accessories
such as cell phones, pagers, change holders, PDA’s, small handheld
GPS, toll transponders, etc. Standard top plates come with one of
two pre-drilled hole patterns. One for Stem Mounts (pivot systems) that has (8) small countersunk
holes or all other mount systems (ball/socket) that has (3) larger countersunk holes. All standard
top plates have a single 1.25” hole used for mounting a camera thumbscrew .
Part # 60996
Wide Top Plate: Replacement top plate that is twice as wide as the
standard top plate and are pre-drilled for use with any of our mount
systems. This is a good choice for mounting two smaller devices
side by side on a single mount system.
Double Top Kit: Two standard size top plates that mount onto a
single shaft, but move independently. This is the right choice for
mounting two devices at different angles. For example: a radar
detector that needs to be level and a GPS that needs to be angled
toward the rider.
Note: Ball /socket systems require Kit # 60998 with replacement shaft
Part # 60997
Part # 61991
Toll free: 866. 341.4192
info @ techmounts.com
techmounts.com
Large GPS Top Plate: A 3.0” x 3.5” top plate with an extensive
pattern of mounting holes that make mounting large GPS
brackets simple. This top plate has pre-drills mounting holes
for most TouraTec brand GPS brackets as well as all of the
R.A.M. plastic cradles.
This is the best choice if you already have one of the these quality
GPS cradles and need to interface with our mounting system.
12
Accessories
Standard
Top Plate
Wide Top
Double Top Kit
60001
fits pivot shaft mounts
black, red, blue, gold, silver
60001C
fits pivot shaft mounts
chrome
60002
fits all ball shaft mounts
black, red, blue, gold, silver
60002C
fits all ball shaft mounts
chrome
60996
fits all except double mounts
black, silver, chrome
60996C
fits all except double mounts
chrome
60997
fits pivot shaft mounts
black, silver, chrome
60997C
fits pivot shaft mounts
chrome
60998
fits all ball shaft mounts
black, silver, chrome
60998C
fits all ball shaft mounts
chrome
60991
fits all mounts
black, silver, chrome
60991C
fits all mounts
61991
fits all mounts
61991C
fits all mounts
1.5” ball shaft with socket
62015B
fits all ball shaft mounts
black, silver, chrome
3.5” ball shaft with socket
62035B
fits all ball shaft mounts
black, silver, chrome
4.5” ball shaft with socket
62045B
fits all ball shaft mounts
black, silver, chrome
1.5” pivot shaft
62015P
fits all stem mounts
black, silver, chrome
3.5” pivot shaft
62035P
fits all stem mounts
black, silver, chrome
4.5” pivot shaft
62045P
fits all stem mounts
blac , silver, chrome
7.5” pivot shaft
62075P
fits all stem mounts
black
2.5” x 5.0”
(2) 2.25” x 3.0”
Double Top Kit
(w/shaft)
(2) 2.25” x 3.0”
GPS/XM radio
AMPS Top
2.25” x 2.50”
Large GPS Top
3.0” x 3.5”
Shafts
13
2.25” x 3.0”
black, silver, chrome
Bases
13mm o-ring post
63013
fits all stem mounts
black
15mm o-ring post
63015
fits all stem mounts
black
16mm o-ring post
63016
fits all stem mounts
black
17mm o-ring post
63017
fits all stem mounts
black
18mm 0-ring post
63018
fits all stem mounts
black
19mm o-ring post
63019
fits all stem mounts
black
28mm o-ring post
63028
fits all stem mounts
black
7/8” handlebar clamp
64078
fits all mounts
black, silver, chrome
1” handlebar clamp
64100
fits all mounts
black, silver, chrome
1 1/8” handlebar clamp
64118
fits all mounts
black, silver, chrome
1 1/4” handlebar clamp
64114
fits all mounts
black, silver, chrome
1 1/2” handlebar clamp
64112
fits all mounts
black, silver, chrome
(6)replacement o-rings
65013
13mm o-ring post
black
(6)replacement o-rings
65015
15mm o-ring post
black
(6)replacement o-rings
65016
16mm o-ring post
black
(6)replacement o-rings
65017
17mm o-ring post
black
(6)replacement o-rings
65018
18mm 0-ring post
black
(6)replacement o-rings
65019
19mm o-ring post
black
(6)replacement o-rings
65028
28mm o-ring post
black
replacement velcro
66000
standard size 2.25” x 3”
black
replacement velcro
66001
wide size 2.5” x 5”
black
Thumb Screw
fits all standard top plates
60006
1/2 “ x 1/4-20
black
Light Mount’s
fits all 1 1/4” round bars
51001
PIAA Bar Mount
black, silver, chrome
fits BMW RT/K1200LT
51002
PIAA Chassis Mount
black, silver, chrome
fits BMW R1200GS
51003
PIAA Light Bar
black
Handlebars
O-ring Kits
Velcro Kits
By HighGear Specialties‚ Inc.
940 West Oakland Avenue • Suite A10‚ Oakland‚ FL 34787
Tel: 407. 654. 3322 • Tf : 866. 341.4192 • Fax: 407. 656.3799
info@techmounts.com • techmounts.com