MODULAR FULL CONVECTION REFLOW OVEN

Transcription

MODULAR FULL CONVECTION REFLOW OVEN
Prototyping
Low Volume
Mid Volume
High Volume
M O D U L A R F U L L CO N V E C T I O N R E F LO W O V E N
Customized Solutions
ZO N D A S E R I E S S MT R E F LO W S Y S T E M
Zonda - 7 zone reflow system
Speeds up to 24 inches (60 cm) per minute
Zonda - 8/9 zone reflow system
Speeds up to 32 inches (80 cm) per minute
Zonda - 13 zone reflow system
Speeds up to 55 inches (140 cm) per minute
ZO N D A S E R I E S S MT R E F LO W S Y S T E M
Best value SMT Reflow Oven in
the market – designed for Low
Cost of Ownership
„ Modern reflow systems require a maximum in flexibility
regarding a large product variety in mid- and high-volume
productions – the Zonda series especially matches these
demands, still featuring low cost of ownership. “
With a high-capacity, 26-inch wide heater module, the Zonda
series offers unmatched flexibility in board handling. The oven
may be fitted with an adjustable single-rail edge hold conveyor/
mesh belt combo, to carry even the largest boards or multiboard panels (up to 20 inches wide) through the oven.
The Zonda series support high mix / medium volume up to
high mix / high volume throughput, at different speeds up to
accommodate the fastest pick & place systems , while conserving valuable factory floor space. Rapid response times and
precise temperature controls assure process uniformity,
regardless of component density or board loading, with
identical profile performance in either air or nitrogen.
The ultimate high volume Surface Mount Technology production solution delivering the highest levels of repeatability with
the lowest delta Ts.
F E AT U R E S A N D B E N E F I T S O F ZO N D A S E R I E S S MT R E F LO W S Y S T E M
Highest Yields and Tight Process Control
Heat transfer
Wide process window
Advanced profiling
The most efficient heat transfer from
Wide process window for „universal
Advanced 5 thermocouple PCB
extra high volume, high-velocity,
profiling“ - allows many different
profiling and process parameter
heating modules, producing heater
boards to be run on a single
logging capability with the capacity to
module response of less than one
temperature profile.
store up to 500 temperature recipes
second to temperature changes of less
than 0.1°C, thereby maintaining profile
integrity for heavy board loads.
and 500 profile graphs.
F E AT U R E S A N D B E N E F I T S
Smart reflow production
solutions
New Flux System Virtually
blanket the PCB with heat for
Eliminates Maintenance
the lowest delta Ts on the
This new flux collection system
toughest boards! Additionally,
traps the flux in a separate
the Uniform Gas Management
collection box with easy to
system eliminates net flow
remove plates. As a result, the
which results in nitrogen
oven tunnel is kept clean - thus
consumption reductions of up
saving time consuming P.M. A
to 40%!
collection jar captures the flux
and can be removed while the
Fastest Cooling Rates
oven is running for the
The new Blow Thru Cooling
ultimate in time savings!
module provides cool rates of
>3° C/sec - even on LGA 775!
Ultra-Parallel Conveyor
That rate meets even the most
System
demanding lead-free profile
Four (4) lead screws ensure the
requirements!
tightest tolerances and parallelism - even on boards with
New Frame
3mm clearance at the edges!
More than simply beautiful, this
new frame utilizes twice the
Process Control
insulation. This modification
Powered by ECD, this innovative
alone, reduces heat loss and
software package provides three
saves up to 40% on electricity
levels of process control from
costs!
Oven CpK, to Process CpK and
Product Traceability, this
Lowest Cost of Ownership
software ensures that all
With the Balanced Flow Heater
parameters are optimized and
Module (BFM) technology the
SPC reporting is fast and easy.
cost of running nitrogen has
been reduced by up to 50%!
Enhanced Heater Modules
And the LOW KW features have
Enhanced flow heater modules
reduced Electrical consumption
with 40% larger impellar,
by up to 40%!
E S S E MT E C W O R L D W I D E
Essemtec AG
Mosenstrasse 20
CH-6287 Aesch/LU
Switzerland
Phone: +41 (0) 41 919 60 60
info@essemtec.com
Essemtec Germany
Starnberg / Munich
Phone: +49 (0) 8151 268 55 01
info@essemtec.de
Essemtec USA
Glassboro, NJ + Phoenix, AZ
Phone: +1 / 856 218 1131
sales@essemtec-usa.com
Essemtec Brazil
Campinas / São Paulo
Phone: +55 / 19 3324 2452
sales-brazil@essemtec.com
Essemtec France
Bogève, France
Phone: +33 (0) 960 10 39 58
info@essemtec-france.com
Essemtec Poland
Warsaw, Poland
Phone: +48 (0) 661 922 962
sales-poland@essemtec.com
For a complete list of all representatives and more product
information please visit our website:
www.essemtec.com
Your local Essemtec partner:
Essemtec Benelux
Herselt, Belgium
Phone: +32 (0) 16 436 742
info@essemtec.be
Essemtec India
Delhi + Bangalore
Phone: +91 (0) 9880 795 227
sales@essemtec-india.com
Become a fan:
Essemtec Asia
Singapore
Phone: +41 (0) 79 729 10 10
sales-asia@essemtec.com