JS Excavator Attachments Guide

Transcription

JS Excavator Attachments Guide
JS Excavator
Attachments Guide
ATTACHMENTS
Introduction
Contents
Our Range
Buckets ................................................................................................... 4 - 10
The following guide details our full range of excavator attachments.
For further information on this range or any of our other ranges please
Quickhitch .................................................................................................... 11
contact the team at JCB Attachments. Our contact details can be
found on the back page.
Selector Grabs .............................................................................................. 12
Why Choose JCB?
JCB’s machines are universally recognised for their quality, productivity and
innovation. Each attachment in our range has been extensively tested and
approved by our engineers and is the perfect partner for your machine.
Rock Wheel .................................................................................................. 13
Hammermaster Breakers ..................................................................... 14 - 15
You can be assured of reliability and efficiency. We have some of the best
availability in the industry and can quickly respond to your requirements.
When you use a JCB Attachment with a JCB machine you are using the
ultimate complete package. Both the machine and the attachment have
Multiprocessor - Cutter Crusher ................................................................ 16
Crushing & Screening Equipment ............................................................... 17
full JCB backup and support with a team of dedicated engineers, service
technicians and customer service advisors. We won’t let you down.
2
3
Excavator Buckets - General Purpose
Excavator Buckets - General Purpose
• Improved productivity from innovative design profile giving more efficient digging,
better soil retention and clean release of material
• Rear profile and torsion box has been redesigned which provides 100% fill factor
and reduced drag
• Hardox 400 toeplate
• Buckets shift up to 12% more material per litre of fuel when compared to old
JCB buckets making a standard work cycle more cost efffective to the end user
• JCB ‘CAT’ style teeth and adaptors with horizontal pin locking
• The pivot position has been lowered which retains a higher percentage tear out
force than previous and competitor’s buckets
Application (DIN18300): Class 1-4: Easily dug and medium stiff soils, clay and gravel.
Part number
(with pins)
Outer width
mm*
Capacity
m³
Teeth
Weight (with pins)
kg
JS115-JS145/JS130W-JS145W/JS220LR/JS260LR
980/A0390
600
0.35
3
309
980/A0391
700
0.42
4
335
980/A0392
800
0.50
4
358
980/A0393
1000
0.66
5
406
980/A0394
1200
0.81
5
451
980/A0395
1300
0.89
6
477
JS160-JS190/JS160W-JS175W/JS330LR/JS360LR
980/A0380
600
0.38
3
448
980/A0381
1000
0.70
4
577
980/A0382
1200
0.91
5
645
980/A0383
1300
0.99
5
673
JS200-JZ255/JS200W/JS330HDR
980/A0370
600
0.38
3
522
980/A0371
700
0.51
3
579
980/A0372
900
0.66
4
643
980/A0373
1100
0.81
4
696
980/A0374
1200
0.96
5
761
980/A0375
1350
1.11
5
813
980/A0376
1500
1.25
6
878
*Width may be up to 50mm wider than stated.
4
Application (DIN18300): Class 1-4: Easily dug and medium stiff soils, clay and gravel.
Part number
(no pins)
Outer width
mm
Capacity
m³
Teeth
Weight
kg
980/A9441
600
0.43
3
575
980/A9442
1200
1.05
5
867
980/A9443
1500
1.37
6
1011
980/A9119
900
0.86
4
834
980/A9130
1350
1.43
5
1058
980/A9131
1500
1.62
6
1145
980/A9132
1750
1.93
7
1277
JS240-JS260
JS290-JS360
5
Excavator Buckets - Heavy Duty
Excavator Buckets - Heavy Duty
• Improved productivity from innovative design profile giving more efficient digging,
better soil retention and clean release of material
• Hardox 400 components
• Rear profile and torsion box has been redesigned which provides 100% fill factor
and reduced drag
• Buckets shift up to 12% more material per litre of fuel when compared to old
JCB buckets making a standard work cycle more cost efffective to the end user
• JCB S Series ‘Esco Super V helix’ style teeth and adaptors with vertical pin locking
Application (DIN18300): Class 5 and 6: Soil not easily dug, easily broken rock and comparable soil
(hardened by drying or freezing or with high rock content).
Part number
(no pins)
Outer width
mm
Capacity
m³
Teeth
Weight
kg
JS115-JS145/JS130W-JS145W
980/A9188
600
0.35
3
336
980/A9189
700
0.42
3
364
980/A9190
800
0.50
4
402
980/A9191
1000
0.66
4
455
980/A9192
1200
0.81
5
520
980/A9193
1300
0.89
5
547
JS160-JS190/JS160W-JS175W
Application (DIN18300): Class 5 and 6: Soil not easily dug, easily broken rock and comparable soil
(hardened by drying or freezing or with high rock content).
980/99624
600
0.38
3
442
980/99623
1000
0.70
4
594
980/99622
1200
0.91
5
675
Part number
(no pins)
980/99621
1300
0.99
5
708
JS200-JZ255/JS200W
Optional bucket pin kit 980/88543 is available for JS115-JS145/JS130W-JS145W
Optional bucket pin kit 980/88544 is available for JS160-JS190/JS160W-JS175W
All of the JCB HD ECO Buckets feature Hardox 400 components for extended
working life. (These are identified in purple).
1. Toe Plate
3. Outer Shell
2. Side Cutter Plate
4. Side Wear Plate
Outer width
mm
Capacity
m³
Teeth
Weight
kg
980/A9000
600
0.38
3
543
980/A9001
700
0.52
3
609
980/A9002
900
0.66
4
690
980/A9003
1100
0.81
4
751
980/A9004
1200
0.96
4
812
980/A9005
1350
1.11
5
893
980/A9006
1500
1.25
5
954
980/A9351
600
0.43
3
647
980/A9352
1200
1.05
4
968
980/A9353
1500
1.37
5
1141
980/A9110
900
0.86
3
925
980/A9112
1350
1.43
4
1189
980/A9113
1500
1.62
5
1268
980/A9114
1750
1.93
6
1428
JS240-JS260
JS290-JS360
3
4
Optional bucket pin kit 980/88544 is available for JS200-JZ255/JS200W
Optional bucket pin kit 980/88545 is available for JS240-JS260
Optional bucket pin kit 980/88546 is available for JS290-JS360
1
2
6
7
Excavator Buckets - Extra Heavy Duty
Excavator Buckets - Grading/Ditch Maintenance
• Heavy duty construction with additional rear wear strips
• Central reinforcing rib for additional strength
• Delta shaped toe plate for improved penetration
• Drainage holes for ditching work in wet conditions
• ‘Cat’ style teeth and adaptors with horizontal pin locking
Application (DIN18300): Class 5 and 6: Soil not easily dug, easily broken rock and comparable soil
(hardened by drying or freezing or with high rock content).
Part number
(no pins)
Outer width
mm
Capacity
m³
Teeth
Weight
kg
1700
1.9
5
2050
JS290-JS360
980/A1111
Excavator Buckets - Rock
• Heavy duty construction with additional internal ribs and rear wear strips
• Delta shaped toe plate for improved penetration
• ‘MTG’ tooth system
• ‘MTG’ hard wearing toe plate lip and bucket heel shrouds and side cutter protection
Part number
Application (DIN18300): Class 7: Hard rock.
Part number
(no pins)
Outer width
mm
Capacity
m³
Teeth
1700
1.9
5
Weight
kg
JS330/JS360
980/A0716
2380
Outer width
mm
Capacity
m³
Teeth
Weight
kg
JS115-JS145/JS130W-JS145W/JS220LR/JS260LR
with pins
980/A2765
1524
0.65
-
475
980/A2766
1836
0.79
-
535
0.79
-
604
with pins and bolt-on toeplate
980/A1782
1836
JS160-JS190/JS160W-JS175W/JS330LR/JS360LR
with pins
980/A2767
1524
0.65
-
487
980/A2768
1836
0.79
-
545
1836
0.79
-
628
331/12864
1524
0.72
-
608
980/A2769
1830
0.87
-
698
980/A2770
2058
1.02
-
791
2058
1.02
-
830
2200
1.30
-
800
333/A2271
2200
1.71
-
1132
333/A2272
2500
1.96
-
1255
with pins and bolt-on toeplate
980/A1783
JS200-JZ255/JS200W
with pins
with pins and bolt-on toeplate
980/A1784
JS240-JS260
no pins
333/A2270
JS290-JS360
no pins
8
9
Excavator Buckets - Ripper
Hydraulic Quickhitch
(Requires quickhitch installation kit)
• Powerful penetration from unique, staggered ripper teeth
• Increased productivity: three times faster than single pointed ripper
• Allows safe, rapid attachment change without leaving the cab, minimising down time
• Forked teeth boost material break-up
• Ensures optimum attachment is always used
• Ability to rip and remove broken material in one pass
• Ultimate safety from two independent locking mechanisms
• JCB CE certified for use with JCB machines
• Linked to dipper position sensor on machine to ensure safe pick-up position
• Please see latest issue of JCB Attachments
sales flash ATT / 80 for more information
• The only JCB approved and fully CE
marked product for JS excavators
available on the market
Machine fitment
Installation kit
part number
Hitch
part number
Additional
parts
JS115-145 Mono
980/A7800
980/A7850
-
JS130-145 TAB
980/A7800
980/A7850
333/K9225
JZ130-145 Mono & TAB
TBA
980/A7850
-
JS160-195 Mono
980/A7800
980/A7851
-
JS160-195 TAB
980/A7800
980/A7851
333/K0183
JS200-220 Mono
980/A7801
980/A7852
-
JS200-220 TAB
980/A7801
980/A7852
333/K0183
JZ235-255 Mono & TAB
TBA
980/A7852
-
JS240-260 Mono
N/A
N/A
N/A
JS290-360 Mono
N/A
N/A
N/A
JS460
N/A
N/A
N/A
JS115-145 Mono
980/A8730
980/A7850
-
JZ130-145 Mono & TAB
980/A9121
980/A7850
-
JS160-195 Mono
980/A8730
980/A7851
-
JS160-195 TAB
980/A8730
980/A7851
332/A9142
JS200-220 Mono
980/A8731
980/A7852
-
JS200-220 TAB
980/A8732
980/A7852
-
JZ235-255 Mono & TAB
980/A9124
980/A7852
-
JS240-260 Mono
980/A7959
980/A6153
-
JS240-260 TAB
980/A7961
980/A6153
-
JS290-360 Mono & TAB
980/A7961
980/A6154
-
JS460
N/A
N/A
-
Smart Control
Part number
(no pins)
Outer width
mm
Capacity
m³
Teeth
Weight
kg
JS200-JZ255/JS200W
980/A3910
780
0.34
3
767
AMS Control
Additional parts required - for DECU/Smart Control
For machines without an additional hydraulic function (low flow hydraulics, double acting auxiliary etc.)
an additional HECU may be required.
If the machine is being upgraded with any of the above functions the same HECU is required. Only one
HECU is required for any combination of the Hitch installation, low flow, hammer pipe work or double
acting auxiliary etc. HECU kit part number 333/A5550.
10
11
Selector Grabs
(Requires double acting auxiliary and
low flow hydraulic service)
Rock Wheels
(Requires hammer pipework)
• The perfect excavation solution where accuracy of cut, low noise and low
vibration are important
• 360° unlimited rotation
• Ideal alternative to breakers where potential damage to surrounding buildings
and services is a concern
• No end stops ensuring grab will always close, even as the toe plates wear
• Quickhitch compatible
• Features direct drive with heavy duty bearings and seals for improved durability
• Clamping cylinder features a hose burst check valve for maximum safety
• Easy to replace tungsten steel bullet type teeth
• Perforated shells offering greater material retention and improved visibility
• 500 Brinell hard wearing toe plates are reversible for extended life
• Large jaw opening for ease of handling awkward items
• Side mounted hoses with guarding to prolong hose life
Machine ready with hanger bracket and hoses.
Part number
Model
Closed capacity
l
Closed capacity
m³
Weight
kg
Jaw width
mm
Opening width
mm
JS130/JS145/JZ140/JS130W/JS145W
980/A0601
Part number
SG325
325
0.325
870
800
1750
SG400
400
0.4
980
850
1830
SG530
530
0.53
1305
900
2000
SG620
620
0.62
1550
1100
2190
12
Max. pick force
kN
980/A1343
RW-50
720
830
6320
26.6
980/A1345
RW-50
765
830
6320
26.6
980/A1347
RW-100N
1400
1060
14270
44.2
RW-100N
1435
1060
14270
44.2
JS240-JS260
JS200WMH
980/A0606
Max. shaft torque
Nm
JS200-JZ255
JS200-JS220/JS200W
980/A0604
Cutting width
mm
JS160-JS190
JS20MH
980/A0603
Weight
kg
JS130-JS145
JS160/JS160W
980/A0602
Model
SG620
620
0.62
1550
1100
2190
980/A1349
13
Hammermaster Breakers
(Requires hammer pipework)
Hammermaster Breakers
(Requires hammer pipework)
• Quiet operation: dampers between casing and percussion unit minimise noise emissions
Machine ready with hanger bracket and hoses.
• High efficiency from power boost which captures recoil energy for reuse on the next stroke
• Performance matched to JCB machines
• Autogrease saves time and ensures proper
lubrication for long life
Part number
Model
Tool
supplied
Operating
weight
kg
Impact energy
J
Blow rate
bpm
JS115-JS145/JS130W-JS145W
• Autostop prevents blank firing to extend
component life
980/A8648
HM870Q
Moil
800
1343
850
980/A8649
HM870Q
Chisel
800
1343
850
• Dust wiper around steel prevent
damaging dust ingress
JS160-JS190/JS160W-JS175W
980/A8650
HM870Q
Moil
800
1343
850
980/A8651
HM870Q
Chisel
800
1343
850
JS115-JS145/JS130W-JS145W
980/A8900
HM1270Q
Moil
1200
2044
750
980/A8901
HM1270Q
Chisel
1200
2044
750
JS160-JS190/JS160W-JS175W
980/A8902
HM1270Q
Moil
1200
2044
750
980/A8903
HM1270Q
Chisel
1200
2044
750
980/A8904
HM1270Q
Moil
1200
2044
750
980/A8905
HM1270Q
Chisel
1200
2044
750
JS200W
JS160-JS190/JS160W-JS175W
980/A8910
HM1570Q
Moil
1500
2530
700
980/A8911
HM1570Q
Chisel
1500
2530
700
JS200-JZ255
980/A8912
HM1570Q
Moil
1500
2530
700
980/A8913
HM1570Q
Chisel
1500
2530
700
JS200-JZ255
980/A8920
HM1770Q
Moil
1800
3155
400-680
980/A8921
HM1770Q
Chisel
1800
3155
400-680
JS240-JS260
Hanger bracket and hoses not included. For use with non-JCB machines.
Part number
Model
Suitable carrier
machine weight
t
Tool
supplied
Operating
weight
kg
Impact energy
J
980/A8922
HM1770Q
Moil
1800
3155
400-680
980/A8923
HM1770Q
Chisel
1800
3155
400-680
980/A8940
HM2470Q
Moil
2200
3864
375-600
980/A8941
HM2470Q
Chisel
2200
3864
375-600
JS240-JS260
Blow rate
bpm
JS290-JS360
980/A8652
HM870Q
12-18
Moil
800
1343
850
980/A8942
HM2470Q
Moil
2200
3864
375-600
980/A8653
HM870Q
12-18
Chisel
800
1343
850
980/A8943
HM2470Q
Chisel
2200
3864
375-600
980/A8906
HM1270Q
15-24
Moil
1200
2044
750
JS290-JS360
980/A8907
HM1270Q
15-24
Chisel
1200
2044
750
980/A8930
HM3070Q
Moil
3000
5497
380-600
980/A8914
HM1570Q
17-28
Moil
1500
2530
700
980/A8931
HM3070Q
Chisel
3000
5497
380-600
JS460
980/A8915
HM1570Q
17-28
Chisel
1500
2530
700
980/A8924
HM1770Q
20-33
Moil
1800
3155
400-680
980/A8932
HM3070Q
Moil
3000
5497
380-600
980/A8925
HM1770Q
20-33
Chisel
1800
3155
400-680
980/A8933
HM3070Q
Chisel
3000
5497
380-600
980/A8944
HM2470Q
25-40
Moil
2200
3864
375-600
980/A8945
HM2470Q
25-40
Chisel
2200
3864
375-600
980/A8934
HM3070Q
35-55
Moil
3000
5497
380-600
980/A8935
HM3070Q
35-55
Chisel
3000
5497
380-600
14
15
Multiprocessor - Cutter Crusher
(Requires merged double acting auxiliary
and low flow hydraulic service)
Crushing & Screening Equipment
JCB Attachments also offer a full range of crusher buckets and powered screening products.
This range is capable of reducing brick, concrete rubble, (including materials with rebar), and rock
to hard core size and provides a viable, cost-effective alternative to the mobile crushing plant.
• Used to demolish buildings
in a safe and controlled manner
•
Crusher buckets are used for on-site recycling of demolition material, in quarries and construction,
boosting the earning potential and versatility of JCB Excavators in diverse applications.
Allows material to be removed,
processed and separated by one
machine so that the different
materials can be recycled
Please contact JCB Attachments for more information on this range.
• The heavy duty rotation unit
offers unlimited 360º rotation
•
All wear parts are reversible
and can easily be replaced
on-site without the need for
workshop facilities
Machine ready with hanger bracket and hoses.
Part number
Model
Type
Max cutting
force
t
Max. jaw
opening
mm
Weight
kg
980/A2389
MP200
Universal
200
750
1843
980/A2404
MP200S
Steel
200
750
1708
980/A2391
MP200
Universal
200
750
1680
980/A2405
MP200S
Steel
200
750
1520
980/A2376
MP200
Universal
200
750
2808
980/A2406
MP200S
Steel
200
750
2588
980/A2392
MP300
Universal
300
880
2740
980/A2408
MP300S
Steel
300
880
2690
JS160-JS190
JS200-JZ255
JS330HRD
JS240-JS260
JS290-JS360
980/A2393
MP300
Universal
300
880
2808
980/A2409
MP300S
Steel
300
880
2588
980/A2395
MP400
Universal
400
1010
3423
980/A2410
MP400S
Steel
400
1010
3222
JS460
Product
Model
Capacity
m³
CB60
0.6
CB70
0.66
CB90
0.90
CB120
1.30
CB150
2.30
SB10
0.60
SB14
1.2
SB18
2.4
SB23
4.7
JS130-JS160*
Crusher Bucket
JS175-JZ255*
Crusher Bucket
JS240-JS360*
Crusher Bucket
JS460*
Crusher Bucket
>70 TON UNIVERSAL*
Crusher Bucket
JZ70-JS190*
Powered Screener
JS130 - JS260*
Hanger bracket and hoses not included. For use with non-JCB machines.
Part number
Model
Suitable carrier
machine weight
t
Type
Max cutting
force
t
Max. jaw
opening
mm
Powered Screener
Weight
kg
980/A0768
MP200U
15-25
Universal
200
750
1680
980/A0769
MP300U
22-35
Universal
300
880
2640
980/A0775
MP400U
30-55
Universal
400
110
3480
16
JS200-JS260*
Powered Screener
JS360-JS460*
Powered Screener
*This is a general guide and is dependent on machine dipper lengths. Refer to machine stability matrix in
the attachment handbook for definite machine attachments configurations.
17
Notes
18
Notes
19
Sales Resources: Further sales support material is available
to download from www.jcbstore.com, including:
•Sales flashes
•Images
•Brochures
•Latest News
•Specification sheets
FO R I N T E R N A L U S E O N LY
For more information:
Email: attachments.hotline@jcb.com
Tel: +44 (0)1889 506047 www.jcb.com
JCB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and
accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. 9999/5817 en-GB 06/14 Issue 2

Similar documents

complete range guide

complete range guide The JCB product range encompasses compact products,

More information

Hydraulic Breaker Tools - Rock Drill Sales and Service

Hydraulic Breaker Tools - Rock Drill Sales and Service Advancing in large steps will decrease your performance. Advancing in small steps is more efficient and increases your productivity.

More information