vertical baler: v63occ

BACE, LLC.
2205 North Tryon Street
Charlotte, NC. 28206
Phone: 877.506.2223
Fax: 704.394.2210
Web: bacecorp.com
VERTICAL BALER: V63OCC
Our standard high density baler has an
economical yet dependable design.
BACE equipment meets or exceeds
ANSI Standard Z245.5
VERTICAL BALER: V63OCC
The V63OCC baler is configured for generating mill size, marketable bales of corrugated materials (OCC) while controlling
equipment cost. This model is ideal for Retailers, Grocery Stores, Drug Stores, and other organizations that recycle OCC.
Specifications
Performance
Nominal Bale Size
60" x 30" x 48"
Bale Weight
Up to 1000 lbs OCC
Bale Volume
50 cu. ft.
No. of Bale Tie Slots
6
Compact Force lbs - Normal / Maximum
56,548 / 62,202
Platen Pressure
34 PSI
Average Cycle Time
48 Seconds
Loading Height
49.50”
Ejector System
Semi-Automatic
Hydraulic / Electrical
Motor HP
10
Voltage 3 Phase (V=Volts)
208V, 230V, 480V
Full Load Amps (A = Amps)
Pump GPM
30A, 28A, 14A
10.5
Normal System Pressure PSI
2000
Max. System Pressure PSI
2200
Cylinder Bore x Stroke
6”
Hydraulic Tank-Capacity Gallons
22
ADDITIONAL HYDRAULIC/ELECTRICAL CONFIGURATIONS ARE AVAILABLE. PLEASE CALL BACE FOR MORE INFORMATION.
AVAILABLE OPTIONS:
•
10HP-Submersible Power Unit (Call for Details)
•
Slotted Front Door
•
Wire Guides (allows for front bale tie-off)
•
Rear Feed Opening, Front Eject
•
Feed Chute
•
Counter Weighted Floppy Retainer Dogs
•
Oil Heater
•
Weather Proof Package
•
Full Bale Light
10”
254mm
24” / 609mm
39.00”
990mm
135.50”
3442mm
115 Degree Swing
58”
1473mm
49.50”
1257mm
88”
2235mm
39.00”
990mm
Due to continual product improvement BACE reserves the right to change specifications without notice.
The information and pictures used in the document are for illustrative purposes only. Printed on recycled paper. January 2013
CUSTOMER ORDER FORM: V63OCC
Customer Details
Bill To
Ship To
Company:
Company:
(Legal Name)
(Legal Name)
Address:
Address:
City / State / Zip:
City / State / Zip:
Attention:
Attention:
Phone:
Phone:
Fax:
Fax:
Order Details
Select HP / Voltage and Electrical Requirements - Standard Power Unit(s)



Motor HP
Voltage
Full Load Amps
Power Supply Required
10HP-DRY-3PH
208V
30
60
10HP-DRY-3PH
230V
28
60
10HP-DRY-3PH
460/480V
14
30
Customer is required to supply a fused disconnect and 12’ pigtail














Paid Options - Call for Pricing
Choose Door Swing - Drawing shows LEFT HAND
Optional Power _________V_________HZ_________PHASE
layout based on side of hinge when facing the baler.
Slotted Door
Single Phase Power Unit


LEFT HAND HINGE
RIGHT HAND HINGE
Rear Wire Guides
Full Bale Light
Rear Feed Front Eject
10”
254mm
Front Feed Chute
24” / 609mm
39.00”
990mm
Floppy Retainer Dogs
135.50”
3442mm
Oil Heater
115 Degree Swing
Weather Proof (outdoor use)
58”
1473mm
49.50”
1257mm
Wire ($90 per bundle) #
88”
2235mm
Custom Color / Color Code:
39.00”
990mm
Custom Logo / No charge
Standard Colors / No Charge

Gray

Green

Blue
DELIVERY DETAILS (If you require BACE to setup installation, please fill out Page 4 of this document).
What is your required delivery date?
_____ /_____ /_________
Do you require BACE to deliver?

YES

NO
To process this order, we must receive a signed copy of this document along with a signed copy of the Estimate from BACE for this job.
Signature: ______________________________________________
Date: _____ /_____ /_________
Please fax to: 704-394-2210 or email to SALES@BACECORP.COM
P.O. # __________________
CUSTOMER INSTALLATION FORM: V63OCC
Customer Installation Details
Contact Information
Installation Questions
Company:
Do you have a loading dock with
an 8’ wide door?
Address:

YES

NO

YES

NO

YES

NO

YES

NO

YES

NO
What is your ceiling height?
Any obstacles (steps, grade
City / State / Zip:
change, overhead pipes, etc)
Do we need to remove an
Attention:
existing baler?
Do you have a forklift on site?
(If no, a $350 forklift fee will apply)
Phone:
What is the capacity of your forklift?
Fax:
Provide a diagram for the proposed location of the baler similar to the drawing below.
To process this order, we must receive a signed copy of this document along with a signed copy of the Estimate from BACE for this job.
Signature: ______________________________________________
Date: _____ /_____ /_________
Please fax to: 704-394-2210 or email to SALES@BACECORP.COM
P.O. # __________________