Softball | Baseball - Schuttsports Europe

1000078
SCHUTT® SPORTS
710 S. Industrial Dr., Litchfield, IL 62056
800.426.9784.phone • 217.324.2732.fax
customerservice@schutt-sports.com
Dryz Intellitemp™ is a trademark of H.H. Brown Shoe Co.
Coolmax® and Lycra® are registered trademarks of INVISTA
MLB® and Major League Baseball® are registered trademarks of Major League Baseball Properties, Inc.
iPod® is a registered trademark of Apple
Minor League Baseball® is a registered trademark of National Association of Professional Baseball Leagues, Inc.
Softball | Baseball
INSIDE
Partners
Helmets
4-21
Helmet Accessories
22-24
Protective Gear
25-38
Umpire’s Gear
39-40
Equipment Bags
42-43
Training Aids
44-46
Bases
47-57
BB/SB Training Nets
58
Made in the
USA
The Largest Domestic Manufacturer
of Batter’s Helmets in the USA
Schutt Sports is a premier supplier of the best softball equipment in the game. We work diligently with all
our sponsored teams, affiliated organizations and the game itself. We’re proud of the role we play.
4
5
AiR-7 BB
Cool Vents
Not only do the air vents look good they also maximize air flow throughout the
helmet, keeping you cool and performing your best.
Schutt batter’s helmets are
Made in the USA
AEGIS® Anti-Microbial
All of the pads inside the AiR-7, including the AiR-Dri front pads, receive a
complete anti-microbial treatment. The pads also feature Dryz IntelliTemp™
moisture management and heat control, as well as Aegis® microbe shield
anti-microbial system.
Easy to Upgrade
Easy to upgrade with batter’s guards and chin straps: The AiR-7 is pre-drilled
for batter’s guards and chin strap snaps are standard. The BB model is not
pre-drilled and does not have chin strap snaps. Look on page 22 for Schutt brand
batter’s guards and on page 24 for Schutt brand chin straps.
Helmet/Padding System
Soft, comfortable AiR-Pod interior pads are vinyl covered but still offer maximum
protection. Plus, AiR-Dri front pads soak up excess sweat and help keep your eyes
and face clear. Helmet built from high-impact, durable ABS plastic.
Color Options
Available in the following color options: molded, high gloss and custom. Choose
from 8 different paint designs and over 1,000 color options. See pages 16-21.
AiR-7 BB
The same helmet as the AiR-7 but
built specifically for baseball players:
no chin strap snaps and not pre-drilled.
To determine your head size, use a measuring tape to measure the
circumference of your head one inch above your eyebrows
AiR-7
AiR-7 BB
3170012CCCCCC 3170512CCCCCC
X-Small
(6 1⁄2 - 6 3⁄4) (20 3⁄4 - 21 1⁄4”)
3170013CCCCCC
3170513CCCCCC Small
(6 7⁄8 - 7) (21 1⁄2 - 22”)
3170014CCCCCC
3170514CCCCCC Medium
(7 1⁄8 - 7 1⁄4) (22 1⁄4 - 22 3⁄4”)
3170015CCCCCC 3170515CCCCCC Large
(7 3⁄8 - 7 1⁄2) (23 - 23 1⁄2”)
3170016CCCCCC
3170516CCCCCC X-Large
(7 5⁄8 - 7 3⁄4) (23 3⁄4 - 24 1⁄4”)
317100X Replacement Pad Set (jaw pads included)
Sizes: XS (2), S (3), M (4), L (5), XL (6)
WARNING This faceguard/helmet system cannot protect the wearer from all injuries that might occur while participating in baseball or softball. This product was
specifically designed and fabricated to be mounted on a baseball/softball helmet and to be used as facial protection in the sport of baseball/softball. The product
is not designed for use with any other helmet or for any other purpose. Schutt® Sports disclaims any and all expressed or implied warranties, including the warranty of fitness for a particular purpose, other than as set forth herein.
All Schutt® helmets
exceed NOCSAE® standards
317000X
Jaw Pads w/ Snaps (sold in pairs)
Sizes: 1 1⁄4” (1), 1 1⁄8” (2), 1” (3), 7⁄8” (4), 3⁄4” (5), 5⁄8” (6)
6
7
AiR-5 BB PT
Cool Vents
Schutt batter’s helmets are
Made in the USA
Not only do the air vents look good they also maximize air flow throughout the
helmet, keeping you cool and performing your best.
AEGIS® Anti-Microbial
The AiR-5 Helmets are treated with a powerful anti-microbial agent to battle
mold, mildew, fungus and bacteria.
Easy to Upgrade
Easy to upgrade with batter’s guards and chin straps: The AiR-5 and AiR-5 PT are predrilled for batter’s guards and chin strap snaps are standard. The BB model is
not pre-drilled and does not have chin strap snaps. Look on page 22 for Schutt
brand batter’s guards and on page 24 for Schutt brand chin straps.
Helmet/Padding System
Comfortable, dual density foam pads give you maximum protection. Helmet
is built from high-impact, durable ABS plastic.
Color Options
Available in the following color options: molded, high gloss and custom. Choose
from 8 different paint designs and over 1,000 color options. See pages 16-21.
AiR-5 BB
AiR-5 PT
Same as the AiR-5
but built specifically
for baseball players:
no chin strap snaps
and not pre-drilled.
Our patented
Ponytail Port™
is the ideal fit
for players with
longer hairstyles.
U.S. Patent #5,666,670
WARNING This faceguard/helmet system cannot protect the wearer from all injuries that might occur while participating in baseball or softball. This product was
specifically designed and fabricated to be mounted on a baseball/softball helmet and to be used as facial protection in the sport of baseball/softball. The product
is not designed for use with any other helmet or for any other purpose. Schutt® Sports disclaims any and all expressed or implied warranties, including the warranty of fitness for a particular purpose, other than as set forth herein.
All Schutt® helmets
exceed NOCSAE® standards
To determine your head size, use a measuring tape to measure the
circumference of your head one inch above your eyebrows
AiR-5
AiR-5 BB
AiR-5 PT
3150011CCCCCC 3150511CCCCCC
3150911CCCCCC
2X-Small
(6 3⁄8 - 6 1⁄2)
(19 1⁄2 - 20 1⁄2”)
3150012CCCCCC 3150512CCCCCC
3150912CCCCCC X-Small
(6 5⁄8 - 6 3⁄4) (20 3⁄4 - 21 1⁄4”)
3150013CCCCCC
3150513CCCCCC 3150913CCCCCC Small
(6 7⁄8 - 7) (21 1⁄2 - 22”)
3150014CCCCCC
3150514CCCCCC 3150914CCCCCC
Medium
(7 1⁄8 - 7 1⁄4) (22 1⁄4 - 22 3⁄4”)
3150015CCCCCC 3150515CCCCCC 3150915CCCCCC
Large
(7 3⁄8 - 7 1⁄2) (23 - 23 1⁄2”)
3150016CCCCCC
3150516CCCCCC 3150916CCCCCC
X-Large
(7 5⁄8 - 7 3⁄4) (23 3⁄4 - 24 1⁄4”)
8
9
Cool Vents
AiR-3 BB PT
Not only do the air vents look good they also maximize air flow throughout the
helmet, keeping you cool and performing your best.
Schutt batter’s helmets are
Made in the USA
AEGIS® Anti-Microbial
The AiR-3 Helmets are treated with a powerful anti-microbial agent to battle
mold, mildew, fungus and bacteria.
Easy to Upgrade
Easy to upgrade with batter’s guards and chin straps: The AiR-3 and AiR-3 PT are predrilled for batter’s guards and chin strap snaps are standard. The BB model is
not pre-drilled and does not have chin strap snaps. Look on page 22 for Schutt
brand batter’s guards and on page 24 for Schutt brand chin straps.
Helmet/Padding System
Premium OSFA helmet with a high-impact, durable ABS helmet shell. Comfortable,
dual density foam pads give you maximum protection.
Color Options
Available in the following color options: molded, high gloss and custom. Choose
from 8 different paint designs and over 1,000 color options. See pages 16-21.
Bases Loaded
Special
Offer
Pre-built with attached batter’s guard and throat strap offered at an economical
price point. Available in two styles: AiR-3 with batter’s guard or AiR-3 with softball
batter’s guard and four molded colors: Black (006), Scarlet (003), Navy (008)
and White (002). Helmet and guard are matching colors.
AiR-3 BB
AiR-3 PT
Same as the AiR-3
but built specifically
for baseball players:
no chin strap snaps
and not pre-drilled.
Our patented
Ponytail Port™
is the ideal fit
for players with
longer hairstyles.
AiR-3 BB
AiR-3 PT
3130010CCCCCC 3130510CCCCCC
3130910CCCCCC
To determine your head size, use a measuring tape to measure the
circumference of your head one inch above your eyebrows
OSFA
(6 1⁄2 - 7 1⁄2)
(20 1⁄2 - 23 1⁄2”)
AiR-3 Bases Loaded
U.S. Patent #5,666,670
WARNING This faceguard/helmet system cannot protect the wearer from all injuries that might occur while participating in baseball or softball. This product was
specifically designed and fabricated to be mounted on a baseball/softball helmet and to be used as facial protection in the sport of baseball/softball. The product
is not designed for use with any other helmet or for any other purpose. Schutt® Sports disclaims any and all expressed or implied warranties, including the warranty of fitness for a particular purpose, other than as set forth herein.
AiR-3
All Schutt® helmets
exceed NOCSAE® standards
3130010CCC1CC
(with batter’s guard)
OSFA
(6 1⁄2 - 7 1⁄2)
(20 1⁄2 - 23 1⁄2”)
3130010CCC2CC
(with softball guard)
OSFA
(6 1⁄2 - 7 1⁄2)
(20 1⁄2 - 23 1⁄2”)
10
11
AiR-Pro Elite BB
Traditional Shell
Traditional helmet shape that so many players love and grew up with.
Schutt batter’s helmets are
Made in the USA
AEGIS® Anti-Microbial
The AiR-Pro Elite Helmets are treated with a powerful anti-microbial agent to
battle mold, mildew, fungus and bacteria.
Easy to Upgrade
Easy to upgrade with batter’s guards and chin straps: The AiR-Pro Elite is
pre-drilled for batter’s guards and chin strap snaps are standard. The BB model is
not pre-drilled and does not have chin strap snaps. Look on page 22 for Schutt
brand batter’s guards and on page 24 for Schutt brand chin straps.
Helmet/Padding System
Premium fitted helmet with a high-impact, durable ABS helmet shell.
Soft, comfortable AiR-Pod interior pads are vinyl covered but still offer
maximum protection.
Color Options
Available in the following color options: molded, high gloss and custom. Choose
from 8 different paint designs and over 1,000 color options. See pages 16-21.
AiR-Pro Elite BB
The same helmet as the AiR-Pro Elite
but built specifically for baseball players:
no chin strap snaps and not pre-drilled.
To determine your head size, use a measuring tape to measure the
circumference of your head one inch above your eyebrows
AiR-Pro Elite
AiR-Pro Elite BB
2800012CCCCCC 2800512CCCCCC
X-Small
(6 1⁄2 - 6 3⁄4) (20 3⁄4 - 21 1⁄4”)
2800013CCCCCC
2800513CCCCCC Small
(6 7⁄8 - 7) (21 1⁄2 - 22”)
2800014CCCCCC
2800514CCCCCC Medium
(7 1⁄8 - 7 1⁄4) (22 1⁄4 - 22 3⁄4”)
2800015CCCCCC 2800515CCCCCC Large
(7 3⁄8 - 7 1⁄2) (23 - 23 1⁄2”)
2800016CCCCCC
2800516CCCCCC X-Large
(7 5⁄8 - 7 3⁄4) (23 3⁄4 - 24 1⁄4”)
288100X Replacement Pad Set (jaw pads included)
Sizes: XS (2), S (3), M (4), L (5), XL (6)
WARNING This faceguard/helmet system cannot protect the wearer from all injuries that might occur while participating in baseball or softball. This product was
specifically designed and fabricated to be mounted on a baseball/softball helmet and to be used as facial protection in the sport of baseball/softball. The product
is not designed for use with any other helmet or for any other purpose. Schutt® Sports disclaims any and all expressed or implied warranties, including the warranty of fitness for a particular purpose, other than as set forth herein.
All Schutt® helmets
exceed NOCSAE® standards
317000X
Jaw Pads w/ Snaps (sold in pairs)
Sizes: 1 1⁄4” (1), 1 1⁄8” (2), 1” (3), 7⁄8” (4), 3⁄4” (5), 5⁄8” (6)
12
13
AiR-Pro Fitted BB PT
Traditional Shell
Schutt batter’s helmets are
Made in the USA
Traditional helmet shape that so many players love and grew up with.
AEGIS® Anti-Microbial
The AiR-Pro Fitted Helmets are treated with a powerful anti-microbial agent to
battle mold, mildew, fungus and bacteria.
Easy to Upgrade
Easy to upgrade with batter’s guards and chin straps: The AiR-Pro Fitted and AiR-Pro
Fitted PT are pre-drilled for batter’s guards and chin strap snaps are standard.
The BB model is not pre-drilled and does not have chin strap snaps. Look on page
22 for Schutt brand batter’s guards and on page 24 for Schutt brand chin straps.
Helmet/Padding System
Premium fitted helmet with a high-impact, durable ABS helmet shell. Dual
density foam pads are comfortable and give you great protection.
Color Options
Available in the following color options: molded, high gloss and custom. Choose
from 8 different paint designs and over 1,000 color options. See pages 16-21.
Fitted BB
Fitted PT
Same as AiR-Pro Fitted
but built specifically
for baseball players:
no chin strap snaps
and not pre-drilled.
Our patented
Ponytail Port™
is the ideal fit
for players with
longer hairstyles.
U.S. Patent #5,666,670
WARNING This faceguard/helmet system cannot protect the wearer from all injuries that might occur while participating in baseball or softball. This product was
specifically designed and fabricated to be mounted on a baseball/softball helmet and to be used as facial protection in the sport of baseball/softball. The product
is not designed for use with any other helmet or for any other purpose. Schutt® Sports disclaims any and all expressed or implied warranties, including the warranty of fitness for a particular purpose, other than as set forth herein.
All Schutt® helmets
exceed NOCSAE® standards
To determine your head size, use a measuring tape to measure the
circumference of your head one inch above your eyebrows
AiR-Pro Fitted
AiR-Pro Fitted BB AiR-Pro Fitted PT
2794011CCCCCC 2794511CCCCCC
2794911CCCCCC
2X-Small
(6 3⁄8 - 6 1⁄2)
(19 1⁄2 - 20 1⁄2”)
2794012CCCCCC 2794512CCCCCC
2794912CCCCCC X-Small
(6 5⁄8 - 6 3⁄4) (20 3⁄4 - 21 1⁄4”)
2794013CCCCCC
2794513CCCCCC 2794913CCCCCC Small
(6 7⁄8 - 7) (21 1⁄2 - 22”)
2794014CCCCCC
2794514CCCCCC 2794914CCCCCC
Medium
(7 1⁄8 - 7 1⁄4) (22 1⁄4 - 22 3⁄4”)
2794015CCCCCC 2794515CCCCCC 2794915CCCCCC
Large
(7 3⁄8 - 7 1⁄2) (23 - 23 1⁄2”)
2794016CCCCCC
2794516CCCCCC 2794916CCCCCC
X-Large
(7 5⁄8 - 7 3⁄4) (23 3⁄4 - 24 1⁄4”)
14
15
AiR-Pro OSFA BB PT
Traditional Shell
Schutt batter’s helmets are
Made in the USA
Traditional helmet shape that so many players love and grew up with.
AEGIS® Anti-Microbial
The AiR-Pro Fitted Helmets are treated with a powerful anti-microbial agent to
battle mold, mildew, fungus and bacteria.
Easy to Upgrade
Easy to upgrade with batter’s guards and chin straps: The AiR-Pro OSFA
and AiR-Pro OSFA PT are pre-drilled for batter’s guards and chin strap
snaps are standard. The BB model is not pre-drilled and does not have
chin strap snaps. Look on page 22 for Schutt brand batter’s guards and on
page 24 for Schutt brand chin straps.
Helmet/Padding System
One Size Fits All helmet with a high-impact, durable ABS helmet shell. Dual
density foam pads are comfortable and give you great protection.
Color Options
OSFA BB
OSFA PT
Same as AiR-Pro OSFA
but built specifically
for baseball players:
no chin strap snaps
and not pre-drilled.
Our patented
Ponytail Port™
is the ideal fit
for players with
longer hairstyles.
Available in the following color options: molded, high gloss and custom. Choose
from 8 different paint designs and over 1,000 color options. See pages 16-21.
AiR-Pro OSFA
AiR-Pro OSFA BB AiR-Pro OSFA PT
2793010CCCCCC 2793510CCCCCC
To determine your head size, use a measuring tape to measure the
circumference of your head one inch above your eyebrows
U.S. Patent #5,666,670
WARNING This faceguard/helmet system cannot protect the wearer from all injuries that might occur while participating in baseball or softball. This product was
specifically designed and fabricated to be mounted on a baseball/softball helmet and to be used as facial protection in the sport of baseball/softball. The product
is not designed for use with any other helmet or for any other purpose. Schutt® Sports disclaims any and all expressed or implied warranties, including the warranty of fitness for a particular purpose, other than as set forth herein.
All Schutt® helmets
exceed NOCSAE® standards
2793910CCCCCC
OSFA
(6 1⁄2 - 7 1⁄2)
(20 1⁄2 - 23 1⁄2”)
16
17
Color Options
Molded
High Gloss
Built from high-impact ABS plastic, our
molded helmets offer you the ultimate in
performance at an entry level price. Light
weight, maximum ventilation and durability.
Built from high-impact ABS plastic, our high
gloss helmets include a clear coat finish that
your players will love showing off. Light weight,
with maximum ventilation and durability,
these helmets take you to the next level of
on-field performance.
Black - 006
Scarlet - H03
Royal - 005
Scarlet - 003
White - 002
Royal - H05
Cardinal - H18
White - H02
Dark Green - 014
Cardinal - 018
Purple - 011
Dark Green - H14
Black - H06
Purple - H11
Gold - 004
Maroon - 012
Navy - 008
Gold - H04
Maroon - H12
Navy - H08
18
19
Custom Color Options
One Color
Other Custom Colors
Custom Colors now consist of:
One Color Two Color
Three Color
Kandy Colors
Temple University Red- 806
Metallic Purple - 241
Eastern H.S. Navy/Scarlet
572103
Predator Black/Scarlet
863103
Predator Black/Pearl
White/Burnt Orange
863144109
Pearl Gloss Royal Blue/
Pearl White/Kandy Scarlet
574144350
Kandy Royal - 356
Kandy Dark Green - 358
Pearl White - 144
Actual colors may vary slightly from what is shown.
Kentucky Blue
505
Dallas Blue
217
Pearl Dark Green
576
Yorktown Metallic Green
860
Viking Purple
612
Pearl Purple
586
Pearl Black
581
Explosion Pink
953
Atlanta Red
560
Minnesota Red
523
Optic Yellow
310
Pearl Gold
548
Metallic Copper
945
Metallic Dark Old Gold
226
Raider Silver
276
Tampa Bay Pewter
401
Two Color
Predator Black/Metallic Silver
863275
Kandy Scarlet/Predator Black
350863
Three Color
Eastern H.S. Navy/Pearl
White/Kandy Scarlet
572144350
Kandy Scarlet/Pearl
White/Predator Black
350144863
NEW
Kandy Color
Kandy Scarlet - 350
Kandy Purple - 355
20
21
Matte Paint Finish
Paint Styles
NEW
Step 1 - Pick Your Helmet
AiR-7/BB
AiR-Pro Elite/BB
2966 Hockey Style Catcher’s Mask
AiR-5/BB/PT
AiR-Pro Fitted/BB/PT
AiR-3/BB/PT
AiR-Pro OSFA/BB/PT
Step 2 - Pick Your Paint Style
(A)
(A)
(B)
(B)
Solid (1-color)
Feathered Wave (2-color)
(B)
Feathered Bill (2-color)
(A)
(B)
Masked Bill* (2-color)
Eclipse (2-color)
(B)
(B)
NEW
Catcher’s Feathered (2-color)
Step 3 - Pick Your Base Color (A)
Tri-Color* (3-color)
(A)
(A)
(B)
Catcher’s Solid (1-color)
NEW
Triangle* (2-color)
(A)
(C)
(B)
(A)
(A)
Feathered Wrap (2-color)
Catcher’s Wave (2-color)
White - 292
Dark Green - 295
Cardinal - 296
Royal - 294
Purple - 282
Gold - 293
Maroon - 297
Navy - 280
Scarlet - 279
Kelly Green - 281
NEW
Catcher’s Eclipse (2-color)
Step 4 - Pick Your Accent Color(s) (B) (C)
if necessary
Additional Information
- Minimum order quantity for custom painted batter’s helmets
is three pieces per color/paint style. For catcher’s helmets,
the minimum is one piece.
Black - 278
- C ustom paint orders cannot be canceled once helmets
have been painted.
- Custom painting requires additional lead time.
-W
hen specifying paint colors - base color number goes
first followed by accent color number(s).
- Paint charges are added to the molded helmet cost.
* Additional charge for masked paint design.
All New Paint Finish
Helmet or Catcher’s Mask
The New Matte Finish is available in 11 solid colors
and 4 paint styles (Triangle, Masked Bill, Feathered
Bill and Feathered Wrap).
The New Matte Finish is available in the Hockey
Style Catcher’s Mask or any Schutt Batter’s Helmet.
22
23
Fielder’s Guard
AiR-Steel Guards
NEW
Softball Guard
Batter’s Guard
2 1⁄4” Opening
Schutt Fielder’s guards are
Made in the USA
1 3⁄4” Opening
1 5⁄8” Opening
Baseball Model
2 1⁄4” Opening
Black - 006
White - 002
Dark Green - 014
7.4 oz Softball
Titanium Guard
Gold - 004
Dramatically Lighter
than regular model!
SOFTBALL
Softball Model
Cardinal - 018
Scarlet - 003
Navy - 008
Royal - 029
Scarlet - 03
Purple - 011
BATTERS
Burnt Orange - 009
Silver - 042
Black - 06
White - 02
Maroon - 012
AiR-Steel Guards
- Exceeds NOCSAE standards of protection.
®
- I nstalls over the bill which balances the weight of
the batter’s guard and prevents front-weighting.
- Solid steel construction that’s stronger than other batter’s guards.
- Wider field of vision: batter’s guard opening is 1 5⁄8” while the
softball guard features a full 2 1⁄4” opening.
- Easy to install. Helmets have pre-drilled holes or are dimpled
for easy drilling. All you need is a Phillips screwdriver.
12310CCC
12320CCC
12008293
12008294
12007349
15002527
15002524
12003399
Softball Guard
Batter’s Guard
Softball Hardware Kit
Batters Hardware Kit
1
⁄4” Screws
3
⁄8” Screws
Short T-Nuts
Loop Straps
WARNING This faceguard/helmet system cannot protect the wearer from all injuries that might occur while participating in baseball or softball. This product was
specifically designed and fabricated to be mounted on a baseball/softball helmet and to be used as facial protection in the sport of baseball/softball. The product
is not designed for use with any other helmet or for any other purpose. Schutt® Sports disclaims any and all expressed or implied warranties, including the warranty of fitness for a particular purpose, other than as set forth herein.
Complete Set
Complete Set
100 pack
100 pack
100 pack
100 pack
All Schutt® helmets
exceed NOCSAE® standards
- Available in Varsity and Youth Softball, Softball Titanium and Baseball models.
Royal - 29
- Facial and dental protection with solid state construction.
- Great visibility and sightlines so there are no obstruction for ground balls.
- Fully adjustable straps/harness; form-fitting padded chin cup.
- Forehead pad is machine washable (remove, wash on cold and let air dry).
- Softball Titanium model (not shown) is the same mask as the
Softball Fielder’s Mask but made from Titanium. Dramatically
stronger and lighter than regular model.
Pink - 93
(Softball Fielder’s Guards Only)
- Sleek, modern design and ultra-lightweight for max performance.
Fielder’s Guard
122100CC
Varsity Softball Fielder’s Guard
122150CC
Youth Softball Fielder’s Guard
122600CC Varsity Softball Titanium Fielder’s Guard
122200CC Youth Baseball Fielder’s Guard
24
25
Protective Gear
Accessories
Turns Your Ball Cap Into
A Protective Shield
NEW
Schutt Sliding Pad
- Nearly 100 square inches of protective layering
to prevent abrasions.
- One Size Fits Most accommodates nearly every athlete.
- Made from lightweight and breathable material.
- Non-Velcro® design lets you adjust the pad quickly and easily.
- Retail packaged.
- Available in Scarlet (03), Royal Blue (05), Black (06) and Navy (08)
Hard Head
Schutt Sliding Pad
126805CC
- Answers the demand for more protection for players
and coaches on the field.
- Constructed from durable, heavy-duty poly resin.
- Comfortable, impact-resistant foam pads included;
can be placed where you want – giving you the best fit.
- Fits easily in most caps while being impossible to see from the outside.
Hard Head
12510000
Ez-Slider II™
Fit-Tech Chin Strap
Throat Strap
- Patented design gives you extra protection.
- A dvanced design follows the contour
of your chin, giving you an amazing fit.
- Alternative for players who don’t
want to wear full chin strap.
- Hook and Loop attachments prevent it from rolling down.
-N
on-abrasive padding won’t cause
irritations to your skin.
- Made from tear-resistant nylon.
-H
ardened metal buckles (not plastic)
won’t rust and won’t come off.
- Retail packaged.
Contoured
Design
FIT-TECH™ Chin Strap
26652000
- Non abrasive and comfortable;
won’t irritate your skin.
- Retail packaged.
Throat Strap
26650699
WARNING This faceguard/helmet system cannot protect the wearer from all injuries that might occur while participating in baseball or softball. This product was specifically designed and fabricated to be mounted on a baseball/softball
helmet and to be used as facial protection in the sport of baseball/softball. The product is not designed for use with any other helmet or for any other purpose. Schutt® Sports disclaims any and all expressed or implied warranties, including
the warranty of fitness for a particular purpose, other than as set forth herein.
- Machine washable. Available in black only.
- Retail packaged.
Ez-Slider II™
12680406
12680306
12680206
12680106
Measured at calf
Short
Short
Long
Long
Small (11 1⁄2” - 16”)
Large (13 1⁄2” - 20”)
Small (11 1⁄2” - 16”)
Large (13 1⁄2” - 20”)
26
27
S2 Chest Protector
Modified “H-Back” Harness System
NEW Universal
Design for
Baseball
or Softball
The unique “H-Back” harness system hugs your back and shoulders and it
doesn’t billow up. The unique harness makes the S2 conform to the shape of
your shoulders for maximum protection and coverage.
Universal Design
Modified Protective cut accommodates both male and female athletes.
Wide-Weave Mesh
The S2 features hundreds of perforations to maximize airflow and ventilation,
without sacrificing protection or performance. The permeable wide-weave mesh
breathes with you, keeping you cool, dry and ready.
Adjustable Shoulder Caps
Features a wider area for adjustment of shoulder caps, completely customizing
your fit. Shoulder caps are removable.
Contoured Buckle System
The S2 features a contoured buckle system for quick-release action.
S2 Chest Protector
127054CC
127055CC
127056CC
127057CC
127058CC
12” w/detachable tail
13” w/detachable tail
15” w/detachable tail
16” 18” To determine the best
size, measure from the
top of your collar bone to
the bottom of your navel.
Navy/Gunmetal
52
Scarlet/Gunmetal
75
Royal/Gunmetal
81
Black/Gunmetal
85
28
29
S2 Multi-Flex Leg Guards
Triple Flex or Double Flex
NEW
NEW
Removable Triple Flex Third Knee guard allows the leg guard to convert into
a Double Flex Double Knee.
Side Protection
S2 Multi-Flex Leg Guards address a chronic unprotected area - your ankles.
Side protection is built right in for interior and exterior ankle protection.
Maximum Ventilation
S2 Multi-Flex Leg Guards feature hundreds of perforations, maximizing
ventilation without sacrificing protection or performance. Hard shell vents
align with padding vents to maximize airflow.
Gel Knee Pad
New design on Gel Knee pad better cushions the patella.
Aggressive Carbon Fiber Style
S2 Multi-Flex Leg Guards feature an aggressive carbon fiber look and feel.
S2 Multi-Flex Leg Guards
126474CC
126475CC
126476CC
126477CC
13”
14”
16”
17”
S2 Multi-Flex Leg Guards
S2 Multi-Flex Leg Guards
S2 Multi-Flex Leg Guards
S2 Multi-Flex Leg Guards
To determine the best
size, measure from the
middle of your knee to the
bottom of your ankle bone.
Navy/
Gunmetal
52
Scarlet/
Gunmetal
75
Royal/
Gunmetal
81
Black/
Gunmetal
85
30
31
Scorpion Softball/Baseball Chest Protectors
Softball Cut
The Scorpion Chest Protector was introduced
in 2008 – an innovative chest protector truly
designed for female fastpitch players. A true fit
that follows the contours of the player’s body,
giving you protection where it’s needed most.
“H-Back” Harness System
The unique harness system hugs your back and shoulders;
it doesn’t billow up. Instead, it conforms to the shape of
your shoulders for maximum protection and coverage.
Extra Protection
We’ve beefed up protection right over the chest and
heart where direct impacts can be especially dangerous.
The unique padding system also gives you maximum
protection but still has enough “feel” to it to allow you to
deaden the balls in the dirt.
Customizable Shoulder Caps
Navy/Gunmetal
52
You can customize the shoulder caps as you see fit,
moving them around or taking them off completely.
Maroon/Gunmetal
66
Scarlet/Gunmetal
75
Royal/Gunmetal
81
Scorpion Softball Chest Protector
127039CC
127040CC
127041CC
127042CC
12”
13” 15” 16” Softball Chest Protector
Softball Chest Protector
Softball Chest Protector
Softball Chest Protector
Black/Gunmetal
85
Dark Green/Gunmetal
91
Baseball Cut
The innovative Scorpion Chest Protector became
so popular that we introduced a model for baseball
players. A squared off cut that’s designed to better
fit baseball players, while still providing maximum
protection and performance.
Contour Design
New design is more cut and form fitting. The Contour Design
of the Scorpion wraps around your body, without impeding
your movement, giving you protection all over.
Coolmax® Lining
Catcher’s gear can get awfully hot when you’re behind the
plate. Our Coolmax® Lining helps air circulate through the
Scorpion, reducing heat build-up and helping you stay cool.
Plus, ventilation holes have been punched throughout the
padding to increase air circulation.
Hook & Loop Attachment
No more messing with tangled straps or clips! The
fast hook and loop attachment system means you can take
off (or put on) the Scorpion with a flick of the wrist.
Navy/Gunmetal
52
Maroon/Gunmetal
66
Scarlet/Gunmetal
75
Dark Green/Gunmetal
91
Royal/Gunmetal
81
Scorpion Baseball Chest Protector
To determine the best
size, measure from the
top of your collar bone to
the bottom of your navel.
127049CC
127050CC
127051CC
127052CC
127053CC
12” w/detachable tail
13” w/detachable tail
15” w/detachable tail
16” 18” Baseball Chest Protector
Baseball Chest Protector
Baseball Chest Protector
Baseball Chest Protector
Baseball Chest Protector
To determine the best
size, measure from the
top of your collar bone to
the bottom of your navel.
Black/Gunmetal
85
32
33
Scorpion Double/Triple Flex Leg Guards
Double Flex
For catchers that prefer a leg guard that doesn’t have the
extra protection of the Triple Flex™, the Scorpion™ leg guard
comes in the traditional Double Flex™ knee model.
Maximum Protection
Works Great for Softball or Baseball
raps around your leg with comfortable wings that offer
W
maximum protection. Toe plates offer extended protection
but can be removed.
Scorpion Triple Flex and Double Flex Leg Guards work in
tandem with the Scorpion Chest Protector and are great for either
softball or baseball.
Refined Design
Side Ankle Protection
Design is lightweight and ventilated, with ventilation holes
punched throughout the padding and hard, protective shell.
Scorpion Leg Guards address a chronic unprotected area - your
ankles. Side protection (both exterior and interior) is built right in.
Triple Flex
Upgrade with
Gel Knee Pads.
See page 38 for details.
Navy/
Gunmetal
52
Maroon/
Gunmetal
66
Scarlet/
Gunmetal
75
Royal/
Gunmetal
81
Black/
Gunmetal
85
Dark Green/
Gunmetal
91
Double Flex
Triple Flex
The Schutt® exclusive Triple Flex™ design
leaves no part of the leg unguarded. Even in a
crouch, your upper knee and leg are protected.
To determine the best
size, measure from the
middle of your knee to the
bottom of your ankle bone.
Triple Flex
Double Flex
126468CC
126469CC
126470CC
126473CC
126472CC
126471CC
14”
16” 17”
13”
14” 16”
Navy/
Gunmetal
52
Maroon/
Gunmetal
66
Scarlet/
Gunmetal
75
Royal/
Gunmetal
81
Black/
Gunmetal
85
Dark Green/
Gunmetal
91
34
35
2966 Catcher’s Mask
sign
e
D
W
E
N Lighter
15% t Major
s
than Moetitors
Comp
Kandy™ Black/Silver
863
Kandy™ Scarlet/Silver
350
Black Molded
006
Scarlet Molded
003
Kandy™ Navy/Silver
359
Kandy™ Royal/Silver
356
Navy Molded
008
Royal Molded
005
Kandy™ Dark Green/Silver
358
Metallic Maroon/Silver
212
Dark Green Molded
014
Maroon Molded
012
Schutt catcher’s helmets are
Made in the USA
2966 Catcher’s Mask
NEW DESIGN - Wider View
Deluxe, Adjustable Harness
A catcher needs to see all of the field, all of the time. Our
2966 has an increased field of vision, so you can see more
of the field and not sacrifice protection.
Our harness is both comfortable and functional. It fully adjusts
for a fit that’s just right and the secure fasteners keep it in place.
The adjustable harness features durable nylon straps.
Maximizing Air Flow
Anti-Microbial Agent
V entilation holes are built into the 2966 shell, maximizing
air flow and helping you keep cool.
I nterior padding is treated with an anti-microbial agent to battle
mold, mildew, fungus and bacteria, while helping to eliminate odors.
2966000CCC106
2966000CCC101
2967000CCC106
2967000CCC101
296190006
2965001
2961002
(6 5⁄8 - 7 1⁄2)
(20 3⁄4 - 23 1⁄2”)
5
1
(20 3⁄4 - 23 1⁄2”)
(6 ⁄8 - 7 ⁄2)
Hook & Loop Version
Hook & Loop Version
Ponytail Plate (Black Only)
Replacement Chin Pad
Replacement Hardware Kit
Molded Color Options
Painted Two Tone Options
Molded Color Options
Painted Two Tone Options
WARNING This faceguard/helmet system cannot protect the wearer from all injuries that might occur while participating in baseball or softball. This product was
specifically designed and fabricated to be mounted on a baseball/softball helmet and to be used as facial protection in the sport of baseball/softball. The product
is not designed for use with any other helmet or for any other purpose. Schutt® Sports disclaims any and all expressed or implied warranties, including the warranty of fitness for a particular purpose, other than as set forth herein.
All Schutt® helmets
exceed NOCSAE® standards
36
37
Youth Catcher’s Gear
Catcher’s Gear
s
Featurehter
g
i
New, L uard
Faceg
Youth Catcher’s Mask
AiR-Pro 2962
- Professional Hockey Style made from durable ABS.
- D-ring Buckle System Eliminates Snaps.
- Easy to adjust – even while wearing mask.
- Available in Scarlet (03), Royal Blue (05), Black (06) and Navy (08)
Schutt catcher’s helmets are
Made in the USA
- Same great rugged protection and performance.
- Large ventilation holes along the crown maximize air flow.
- Soft, vinyl covered pads are treated with anti-microbial agent
to battle mold, mildew, fungus and bacteria.
Youth Catcher’s Mask
126572CC
Ages 7-12
Scarlet - 003
Black - 006
Navy - 008
AiR-Pro 2962
Royal - 005
2962034CCC
2962056CCC
296200CCC
Small (6 3⁄8 - 7 1⁄4) (20 - 22 3⁄4”)
Large (7 3⁄8 - 7 3⁄4) (23 1⁄8 - 24 1⁄4”)
Replacement Mask & Chin Pad
Adjustable Leg Guard
- Ideal leg guard for youth teams that share equipment or for
leagues with umpires that share equipment.
- Easily adjusts between 11” and 18”.
- Double Knee construction; sleek design that will last for years.
Royal
05
- Coolmax® lining on the inside; helps air circulate through the
pad and around your leg.
Adjusts
U.S. Patent #5,732,411
Black - 06
Scarlet - 03
Navy - 08
Adjustable Leg Guard
126455CC SLG-A1114
12645906 SLG-A1418
11” - 14” 14” - 18” Youth Chest Protector
- Four elastic straps and D-rings.
- Body perforations maximize airflow and cooling power.
- Available in Scarlet (03), Royal Blue (05), Black (06) and Navy (08)
- Plastic reinforcement to protect the collar bone and heart.
- Detachable tail comes standard.
- Available in Scarlet (03), Royal Blue (05), Black (06) and Navy (08)
Youth Leg Guards
126574CC
Ages 7-9
126584CC
Ages 10-12
Youth Chest Protector
126573CC
Ages 7-9 126583CC
Ages 10-12
Youth (All Colors)
Adult (Black Only)
To determine the best size, measure from the middle of your knee to the bottom of your ankle bone
WARNING This faceguard/helmet system cannot protect the wearer from all injuries that might occur while participating in baseball or softball. This product was
specifically designed and fabricated to be mounted on a baseball/softball helmet and to be used as facial protection in the sport of baseball/softball. The product
is not designed for use with any other helmet or for any other purpose. Schutt® Sports disclaims any and all expressed or implied warranties, including the warranty of fitness for a particular purpose, other than as set forth herein.
Youth Leg Guard
All Schutt® helmets
exceed NOCSAE® standards
Youth Catcher’s Gear Combo
- All 3 parts of our Youth Catcher’s Gear at one great price.
- Available in Scarlet (03), Royal Blue (05), Black (06) and Navy (08)
Youth Catcher’s Gear Combo
126571CC
Ages 7-9
126581CC
Ages 10-12
(not pictured)
Special
Offer
38
39
Catcher’s Accessories
Throat Protector
Catcher’s Comfort Pads
- A ttaches to leg guards and provides additional back
support while you’re in a crouch.
- Fits S2 Multi-Flex, Scorpion™ and adjustable leg guards.
- U.S. Patent #5,073,986
Catcher’s Comfort Pads
12656006
Youth
12655006
Adult
5’8” and under
5’9” and up
AiR Flex Umpire Chest Protector
NEW
Design
- Adds additional protection for the neck and throat.
- Easily attaches to bottom of mask.
- Fits most catcher’s masks.
- Made of durable, high-density polypropylene.
Youth Throat Protector
12502006
TPY
Leg Guard Back Pad
Ponytail Backplate
- Reduces rubbing, as well as rashes, abrasions and scratches.
- Attaches to the leg guard straps and helps reduce muscle fatigue.
U.S Patents #5920915, 6032300,
6357054. Other patents pending.
Leg Guard Back Pad
12644604
- Easily attaches to any Schutt Catcher’s mask. Black Only.
- Accommodates longer hair and ponytails for female players.
SLG-CLSS-BP
Replacement Gel Knee Pad
Ponytail Backplate
29619006U.S. Patent # 5,666,670
Replacement Chin Pad
- For use with S2 Multi-Flex and Scorpion Leg Guards
- Provides extra cushioning for the patella.
Replacement Gel Knee Pad
12659006
Replacement Gel Knee Pad
Hardware Kits
- Replacement chin pad for Hockey Style Mask 2966.
Replacement Chin Pad
2965001
For use with Hockey Style 2966
Lightweight Body
Raised Corrugations
All new design that’s more form fitting to maximize protection.
Lighter than previous chest protectors and featuring a breathable,
mesh fabric that maximizes air circulation.
Raised corrugations make the body stronger and more resilient.
10mm ventilation holes in the body maximize air circulation and
evaporation of excess moisture.
Better Protection
New T-Hook Attachment
Features shoulder gap caps in high-risk impact area, a wider chest
plate for better protection and padded Y-back with Coolmax® lining.
The AiR Flex Umpire Chest Protector has a new T-hook attachment
for a secure fit. Also features epaulet style shoulder caps that are
adjustable and/or removable.
Brock Bead™ Construction
Brock Bead™ Construction gives you better protection and more
breathability. Brock Beads absorb more impact and allow more air
to circulate inside the chest protector.
Extended Deltoid Protection
The AiR Flex Umpire Chest Protector features extended protection
for deltoid area and removable deltoid pads.
- Everything you need for a quick repair in one handy package.
Hardware Kits
12008293
12008294
Softball Batter’s Hardware Kit
Batter’s Hardware Kit
AiR Flex Umpire Chest Protector
12703206
SCP-U
OSFA (13.5 h”)
38” - 52” coat size
40
Hockey Style
Helmet (OSFA)
Umpire’s Gear
RECONDITIONING
- Treated with an
anti-microbial treatment
to reduce bacteria.
Adjustable Leg Guard
- Easily adjusts between
14” - 18”.
- Ideal for Youth Leagues
that have umpires who
share equipment.
-R
emovable pads for
easy cleaning.
- Wider field of vision.
- Soft comfortable chin pad.
Hockey Style Helmet (OSFA)
2966000006106 (6 5⁄8 - 7 1⁄2)
(20 3⁄4 - 23 1⁄2”)
- U.S. Patent #5,732,411
Comfort-Lite™
Mask
Adjusts
Adjustable Leg Guard
12645906
SLG-A1418
- Full MRSA treatment on all cloth reconditioning (we kill any
bacteria growth)
- Up to 50% lighter than
most solid wire face masks.
14” - 18” - We recondition helmets with removable parts, along with
helmets with foam pads
- Coolmax® liner to keep
you cool and comfortable.
AiR-U5 Leg Guard
- L ightest, most breathable
protection on the field.
- T apered design gives you a
snug, comfortable fit with
maximum coverage and
movement.
-B
oth the foam padding and
outer shell are ventilated to
increase air circulation.
- S ee page 32 for fitting and
sizing instructions.
AiR-U5 Leg Guard
12641206
16” Fitted Leg Guard
12641306
17” Fitted Leg Guard
Indicators
Catcher’s equipment, batter’s helmets and even uniforms – all
of this equipment can be sent to us for reconditioning. You’ll
get it back, in like-new condition, for a fraction of the cost of
buying new gear. Here’s what we do for your gear:
Comfort-Lite Mask
12720706U.S. Patent #6,497,773
Outside
Chest Protector
- Unlike other reconditioners, all of our recon work stays in the
USA. We don’t send your gear out of the country; your gear
is reconditioned by American workers in American facilities
- On hardware, we use only original manufacturer’s parts,
giving you an assurance of quality and performance that
you can’t be sure of with other reconditioners
- Old school style and
design with built-in ball
storage pocket.
- Durable nylon material
covers 3” thick foam padding.
Outside Chest Protector
12700906
SCP-UO
- Schutt Recon is a Member in Good Standing with both
industry governing bodies, NOCASE and NAERA
- Batters Helmets are re-certified to NOCSAE standards
Accessories
- Multiple facilities, all located in the USA, to fill your orders
quickly, decrease shipping expenses and get your gear
back to you in as short a time as possible
Indicators
12823600
12823300
12823100
12823900
12823200
SBA-UI3/3PY
SBA-UI3/2L
SBA-UI3/20
SBA-UI4/PY
SBA-UI3/2
3-Function Metal (Left)
3-Function Metal (Middle)
3 Function Oval Metal (Not Pictured)
4-Function Plastic (Right)
4-Function Plastic (Not Pictured)
Accessories
12841000 SBA-UBBD
12847106 SBA-USBBD
12820000 SBA-UPB
Ball Bag Deluxe
Softball Bag Deluxe (Navy Only)
Plate Brush
schuttreconditioning.com
42
43
Equipment Bags
Large Team Equipment Bag
- Engineered to combine rugged durability with maximum
equipment storage capacity and ease of on-field use.
- Single compartment vented design to hold all of your gear
and equipment.
Hanging Baseball Helmet Bag
- Heavy-duty polyester material.
- Heavy-duty clips for attaching to fence.
- Oversized internal storage compartment for quick and
easy access to your equipment.
- Fold up straps with handle for easy and secure transportation.
- Heavy-duty polyester PU backed material.
- Zippered individual tops keep helmets securely in place.
- 2” Nylon webbing shoulder and handle strips.
- Velcro attachment tabs keeps top out of the way for quick and
easy access to helmets.
- Dimensions: 35”L x 25”W x 19”H
- Holds eight helmets in individual mesh pockets.
- Dimensions: 55”L x 41”W
Large Team Equipment Bag
12845506
SEB-EB
Hanging Baseball Helmet Bag
12845006
SEB-HHB
Rolling Large Team Equipment Bag
- Engineered to combine rugged durability with
extreme equipment.
- In-line skate wheels for smooth rolling,
storage and ease of use.
- Reinforced Buttons and Shoulder Straps.
Baseball Bat Portfolio
- Padded adjustable shoulder strap.
- Folding zippered case holds eight bats – each in
their own individual pocket.
- Heavy-duty 2” nylon webbing construction.
- Three heavy-duty clips for attaching to a fence.
- Dimensions: 35”L x 25”W x 19”H
- Carry handle with padded grip wrap.
Rolling Large Team Equipment Bag
12845606
SEB-WEB
Baseball Bat Portfolio
12845206
SEB-BTP
Youth Equipment Bag
- A single, heavy-duty clip quickly attaches it to
chin link fences.
- Built from solid, water resistant nylon. Easy to clean.
Individual Helmet Bag
Sack Pack
- Removable patch for customization.
- The ultimate protection for your helmet; drawstring enclosure.
- Great lightweight bag for storing your small stuff.
- Vented, mesh panel allows air to circulate, reducing odors.
- Drawstring straps for easy carrying and closing.
- Ideal space – bag will hold 2 bats, 1 helmet with
batter’s guard, gloves, uniform, cleats and caps
Individual Helmet Bag
12845106
SEB-IHB
Sack Pack
12845906
SEB-SP
Youth Equipment Bag
12848706
SEB-YEB
44
45
Training Aids
Swing Rite Tee
- Dual tee hitting system allows you to work on inside and outside
pitches, high or low, at the same time.
NEW
- Folds up into a compact package that’s easy to carry and store.
Great for traveling with the team.
- Includes comprehensive booklet of drills and training exercises.
Swing Rite Tee
12830500
12830505
12830502
12830510
Adjusts
Ultimate Travel Tee
Batting Tee
- Lightweight, portable hitting tool for baseball or softball.
-Heavy-duty, solid plastic construction: strong and durable
enough to last the entire season.
- A telescoping tee allows you to adjust the height of the
Ultimate Travel Tee.
- Folding base fits into a convenient, water-resistant
carrying bag (included).
Ultimate Travel Tee
12830615Ultimate Travel Tee
12830601 Replacement Top
- Telescoping tee allows you to adjust the height of the Batting Tee.
- Reinforced, full-size home plate serves as the tee’s base
(with a reinforced attachment area).
Batting Tee
12810500
12825000
SBB-BT
SBB-BTRT
Batting Tee
Top Tube Replacement
U.S. Patent #4,819,935
SWRT
SRRBT
SRRTT
SRRF
Swing Rite™ Tee
Tube System Replacement
Top Tube Replacement
Rubber Feet Replacement
DIRX™ Warm Up Bat
- Authentic bat grip.
DIRX™ Warm Up Bat
12913320 DX-200 Youth 34” 80 oz
12913330 DX-250 Adult 36” 96 oz
- Popular with Major League Baseball® clubs as a swing
trainer and to develop muscle memory.
- Unique adjustable weight makes your swing as heavy
or light as you want.
Tee Toppers
Striker®-II
-Endorsed by Tony Gwynn, 15-time All Star and 8-time batting champion.
-Great tool to enhance any training program, practice or
pre-game warm-up.
- Constructed with clear, soft plastic that’s rugged and durable.
- Easily attaches to any chain link fence.
- Clear design makes it easy to concentrate on hitting the ball,
not the topper.
- Unique wear indicator shows when you need to replace the ball/strap.
- For use with Batting Tee #12810500.
Softball
Tee Topper
Baseball
Tee Topper
Tee Toppers
12830520
12830515
U.S. Patent #5,386,986
SBB-SB
SBB-BB
Softball Topper
Baseball Topper
Striker®-II
12912295
12912315
STKRB-II
STKRBB-II
Striker®-II
Replacement Ball/Tether
46
U.S. Patent #4,887,811
Since 1939,
every field in
Major League
Slide-Rite™
- Use for indoor or outdoor workouts.
- Canvas sheet on top of rugged foam pad reduces wear and tear.
Slide-Rite™
12911240
Baseball
™
TT-SRS
Standard
42” x 12’
has used
our bases.
Strike Zone Home Plate™
Extended Strike Zone Home Plate™
- Great visual feedback for pitchers learning to
“work the edges”.
- Great visual feedback for pitchers learning to “work the edges”.
- Lightweight design goes anywhere and can sit
atop regular home plate.
- Great training tool for umpires learning the strike zone.
- Extra brown and black stripes on the outside of home plate
to help the pitchers “paint the corners”.
- Lightweight design goes anywhere and can sit atop
regular home plate.
- Great training tool for umpires learning the strike zone.
Strike Zone Home Plate
12806900
SHP-SZ
Strike Zone HP
Extended Strike Zone Home Plate
12806800 SHP-SZEExtended Strike Zone HP
The following are trademarks or service marks of Major League Baseball entities and may be used only with permission of Major League
Baseball Properties, Inc. or the relevant Major League Baseball entity: Major League, Major League Baseball, MLB, the silhouetted batter
logo, World Series, National League, American League, Division Series, League Championship Series and All-Star Game.
48
49
Bases
Level
Level
1
1
15” x 15” x 3”
15” x 15” x 3”
Jack Corbett® MLB® Hollywood Base®
Pro-Style Hollywood Impact®
- The exclusive base of Major League Baseball® for over 70
years. Used by all six National Pro Fastpitch Softball clubs.
- Features 1200 lb. of tensile strength to prevent
most cuts and tears.
- Our extended, tapered lip virtually eliminates all edge turn up.
Cheap, imitation bases will often have edges that “turn up.”
- Comes with 6” stanchions.
- Engineered to better withstand bad weather and also
includes special ultraviolet inhibitors.
- Shipping Weight: 13 lb. (12901040); 34 lb. (12901010)
- Anchor plugs and ground anchors sold separately.
See page 57.
- Same look and feel as the original Jack Corbett® Bases.
- Innovative engineering makes this base compress upon impact,
reducing stress and pressure on players and reducing injuries.
- Patented Chevron design on the underside of the base is truly
unique to the game. It provides stability, support and durability.
Plus, it’s vital to the base’s ability to compress upon impact.
- Comes with 6” stanchions.
- Shipping Weight: 13 lb. (12903040); 34 lb. (12903010)
Jack Corbett® MLB® Hollywood Base®
12901040
12901010
BBPLS
BBPL
- Anchor plugs and ground anchors sold separately. See page 57.
Single Base
Set of 3 Bases
- U.S. Patent #5,415,395
Pro-Style Hollywood Impact®
SKILL level
Level
1
PROFESSIONAL/ADVANCED
Level
2
COMPETITIVE
Level
3
RECREATIONAL
12903040
12903010
HIBPLS
HIBPL
Base Accessories
Single Base
Set of 3 Bases
12916532
12916550
Stanchion Convertor 8” Anchor Mounts Sold individually
Set of 3
50
51
Hollywood Impact® Base
- Premium, professional construction with patented chevron design.
- Chevron design adds support and durability.
- Patented technology compresses upon impact, reducing
risk of ankle, leg and knee injuries.
- Comes with 6” stanchions.
- Shipping weight: 11 lb. (12902040); 29 lb. (12902010);
Level
2
- Anchor plugs and ground anchors sold separately.
See page 57.
Hollywood Impact® Base
15” x 15” x 2 ⁄2”
1
12902040 HIBLS
12902010 HIBL
Level Level
2 3
Single Base
Set of 3 bases
15” x 15” x 2 1⁄4 - 3⁄4”
Hollywood Impact® Kwik-Release™ Base
Hollywood Slider Base
®
- Unique design features beveled corners and tapered base.
- Allows runners to slide right over the base, reducing risk of injury.
Level
2
- Officially Recommended Base of Babe Ruth League®
Baseball and Cal Ripken Baseball®.
- Patented design compresses upon impact, like other
Hollywood Impact® bases.
- Solid, one-piece construction.
- For additional safety precautions, the top of this base
will disengage upon strong enough impact.
- Comes with 4” stanchions (attached with nylock nuts).
- Two resistance levels available: Youth and Varsity.
- Soft orange tabs on the platform hold onto the top of the base
but are soft enough for players to slide over.
- Fully compliant with Little League® Rule 1.06.
- Ground Plugs and Anchors sold separately. See page 57.
- U.S. Patent #5,000,447 & 5,415,395. Other patents pending.
- Shipping weight: 16 lb. (12905090)
- Anchor plugs and ground anchors sold separately. See page 57.
Hollywood Impact® Kwik-Release™ Base
12906020 Youth Single Base
Hollywood Slider Base
®
15” x 15” x 2 1⁄2”
- Bottom features waffle-design that adds strength and flexibility.
12905090 SS1S Single Base
12905040 SS1
Set of 3 Bases
12905130 MADS-4Double 1st Base, 2 Slider™ Bases
Shipping Weight: 23 lb.
12906010 Youth Set of 3 Bases Shipping Weight: 69 lb.
The Schutt Hollywood® Kwik-Release Base
is the Recommended Base of Babe Ruth Baseball
and Softball, as well as Cal Ripken Baseball.
12906040 Varsity Single Base
Shipping Weight: 23 lb.
12906030 Varsity Set of 3 Bases Shipping Weight: 69 lb.
52
53
Pro-Style Base
- These official-size bases look just like Major League Baseball®
bases and are covered with a heavy-duty rubber protective layer.
- Comes with 4” or 6” stanchions.
Level Level
1 2
- Anchor plugs and ground anchors sold separately. See page 57.
- Shipping weight: 42 lb.
Level
2
Pro-Style Base
12814040 SBB-PSA-4
12814000 SBB-PSA-7
Set of 3 Bases 4” stanchions
Set of 3 Bases 6” stanchions
15” x 15” x 3”
30” x 15” x 2 1⁄2”
Hollywood Impact® Double First Base
Hollywood Impact® Double First Base
Impact® Throw Down Bases
- Patented technology compresses upon impact, reducing
risk of ankle, leg and knee injuries.
12902080 HDB
12902060 HIBD
- Shipping Weight: 26 lb. (12902080); 47 lb. (12902060)
Comes with 6” stanchions
- The ability to flex, or compress, lowers the risk of injury to
players sliding into the base. The waffle bottom helps the
base compress when a strong enough impact hits the base.
- Premium, professional construction with patented
chevron design, which adds support and durability.
1 Double First Base
1 Double First Base, 2 Impact® Bases
Level
3
- Shipping weight: 32 lb.
Impact Throw Down Bases
12814140 SBB-IBTD Set of 3 Bases
15” x 15” x 2 1⁄2”
THROW DOWN BASES
Level Level
2 3
15” x 15” x 2 ⁄4 - 2 ⁄4”
1
3
Hollywood Impact®
Kwik-Release™ Double First Base
- Comes in convenient and durable mesh carrying bag.
Level
3
- Unique waffle bottom design.
- Easy solution for indoor or outdoor games and practices.
- Shipping weight: 13 lb.
Throw Down Bases
12770300 MBSBB-WBTD
Set of 3 Bases
15” x 15” x 2 1⁄2”
-Officially Recommended Base of Babe Ruth League Baseball®
and Cal Ripken Baseball®.
- Patented design compresses upon impact, like other Hollywood
Impact® bases.
- For additional safety precautions, the top of this base will
disengage upon strong enough impact.
- Uses a single, 1 3⁄4” ground anchor.
- Bottom features waffle-design that adds strength and flexibility.
- Soft orange tabs on the platform hold onto the top of the base
but are soft enough for players to slide over.
Hollywood Impact® Double First Base
12906070 1 Double First Base, 2 Youth Bases
12906050 1 Double First Base, 2 Varsity Bases
12906060 1 Double First Base (Shipping weight: 36 lb.)
U.S. Patent #5,000,447 & 5,415,395.
Base Accessories
12916590 Anchor Plugs
Sold individually
12916532 Stanchion Convertor (HIB/33) Sold individually
12916580 Mushroom Plugs (BBP-64)
Set of 3
54
Hollywood MLB
Pro Style Home Plate
®
Level Level
Hollywood Bury-All
Home Plate
®
2 3
Economy Base Set
- Premium quilted covers for long product life and durability.
- Each base includes two nylon web straps and
two steel anchor stakes.
- Bonus mesh carrying bag included.
- Includes two steel anchor stakes with each base.
- Shipping weights: 13 lb. (Varsity); 9 lb. (Youth)
- 14” x 14” x 2” Youth; 15” x 15” x 3” Varsity
Economy Base Set
12802000 SBB-142
12770600 MBSBB-153
- Maximum strength, suitable for portable or temporary install.
- Includes 6” stanchion, 5 zinc plated spikes, 1 anchor and 1 plug.
- 1 ½” thick. (18 lb. shipping weight)
Hollywood MLB® Pro Style Home Plate
12807300 SHP-UM Home Plate
Set of 3 Bases (Youth)
Set of 3 Bases (Varsity)
Schutt® Bury-All Home Plate
- Premium all rubber construction for ultra durability.
- No spikes needed for installation.
- Waterproof. (24 lb. shipping weight)
Level
3
Level
3
Schutt® Bury-All Home Plate
12807100 SHP-RBABury-All Home Plate
Schutt® Spiked Home Plate
Throw Down Complete Set
Throw Down Home Plate
- Set includes: 3 bases, home plate, pitcher’s rubber and mesh bag.
- Made of heavy-duty molded rubber with a waffle bottom.
- Bases have waffle bottom and are suitable for indoor or outdoor use.
- 3 installation spikes and mesh carrying bag included.
- Shipping weight: 6 lb.
- Shipping weight: 7 lb.
Throw Down Complete Set
12770100
MBSBB-TD
Case packs of 5 available
Throw Down Home Plate
12770200
MBSHP-WB
- 5 spikes included.
- Black beveled edge. (13 lb. shipping weight)
Case packs of 5 available
Schutt® Spiked Home Plate
12805000
SHP-EC
Spiked Home Plate
- Maximum strength, all rubber construction.
- No spikes needed for installation. Non-skid rubber surface.
- Ideal for permanent installation. (24 lb. shipping weight)
Hollywood® Bury-All Home Plate
12908170
SRHP
Bury-All Home Plate
Schutt® Pro Home Plate
- Rugged, molded rubber construction.
- Stanchion mounted steel.
- Ground anchor included. (17 lb. shipping weight)
Schutt® Pro Home Plate
12807200 SHP-PSPro Home Plate
Hollywood® Strike Zone Mat
- Designed for slow pitch softball.
- Bright orange color for high visibility.
- Made of heavy-duty molded rubber. (2 lb. shipping weight)
Hollywood® Strike Zone Mat
12807000
SHP-SSM
16 1⁄2” x 25” Mat
55
56
57
Hollywood® Dual Stanchion
Removable Pitching Rubber
- Easy to remove and relocate for different levels of play.
- Includes anchor, stanchion and pitching rubber.
- 18” or 24”. (16 lb. shipping weight)
Hollywood® Dual Stanchion Removable Pitching Rubber
12920706 LBMPR218 18” Dual Stanchion
12920704 LBMPR224 24” Dual Stanchion
Hollywood® 4-Sided
Professional Pitching Rubber
Replacement Dual Ground Anchors
Base Caddy™
Base Plugs
- Anchor replacement for 18” and 24” dual stanchion.
removable pitching rubber.
- Shipping weight: 6 lb. (12920707)
Anchor Plugs
w/indicator
Replacement Dual Ground Anchors
12920707
18” Replacement Dual Ground Anchor
12920705 24” Replacement Dual Ground Anchor
Mushroom Plugs
- Plug has colored indicator that makes it easy to spot
the plugs but won’t be hurt by infield rakes or tractors.
- Mushroom plugs are a low cost alternative and easy
to install and remove.
- Shipping weight: 1
lb. (12916590); 3 lb. (12916580)
Schutt® 4-Sided
Professional Pitching Rubber
Base Plugs
12916590 Anchor Plugs w/Indicators Sold individually
12916580 Mushroom Plus (BBP-64) Set of 3
- Ultra-durable, premium molded rubber design.
- Interior aluminum tube for professional strength.
Hollywood® 4-Sided Professional Pitching Rubber
12909180 BBPB
Shipping weight: 22 lb.
Hollywood® 24” Step Down Pitching Rubber
Ground Anchor Mounts
- Interior plastic tube.
- Shipping weight: 11lb. (12809000); 25lb. (12808500)
Schutt® 4-Sided Professional Pitching Rubber
12809000
SPR-4SY Youth 4” x 18”
12808500
SPR-4SO Official 6” x 24”
Schutt® Step Down Pitching Rubber
- Multiple universal adapter pins on the Caddy accept all
types of bases and stanchions. Shipping weight is 33 lb.
- Our Base Caddy is a great way to store and carry all your bases.
Base Caddy
12915440
- Step-style improves footing; ultra-durable construction.
- Reduces maintenance and upkeep of pitcher’s mound.
Hollywood® 24” Step Down Pitching Rubber
12909190 SRSLSD
24” Step Down
- Durable economical step down pitching rubber.
- Shipping weight: 11 lb. (12810000); 16 lb. (12809500)
Schutt® Step Down Pitching Rubber
12810000
SPR-SDY
Youth
12809500
SPR-SD
Official
- 8” female ground anchor - 1 ¾” square.
- Cleans easily with Schutt® Digout tool. (5 lb. shipping weight)
Ground Anchor Mounts
12916550
BBP-44Set of 3 anchors
Base Caddy
Digout Tool
Stanchion Converter
- The perfect tool made specifically to clean out ground anchors.
- Easily converts a sleeve-style base to accept a male
(post-style) ground anchor.
4” x 18”
6” x 24”
Spike Installed Pitching Rubber
Includes
Mesh Bag
Youth
4” x 18”
Spike Installed Pitching Rubber
12770500 MBSPR-ECY Youth (6 lb. shipping weight)
Official
6” x 24”
Digout Tool
12916610
12770400
MBSPR-ECO
Official (10 lb. shipping weight)
TRB51
Digout Tool
Stanchion Converter
12916532 Stanchion Convertor
Sold individually
58
The Greatest
Names on the
Diamond Do It.
You Can Too.
BB/SB Training Nets
From the hallowed grounds
of Yankee Stadium, Chavez
Ravine and Wrigley Field,
to cherished icons with
names like Mud Hens, Biscuits
and Flying Squirrels, these
diamonds all build their brand
and fan experience with
custom base jewels.
- Get in hundreds of swings on the tee in a short time
- Can be used for Softball or Baseball
- T arget panel is adjustable, allowing pitchers to work
on specific locations
- Can also be used a training aid for pitchers
- Can also be used as a backstop
- Available in Varsity and Youth models
-B
reaks down quickly and transports easily in the
included nylon carry bag
Pre-Game Hitting Net
10002100
Youth
(5’ 6” x 4’)
10002200
It’s easy to do. In fact, we’ll do
it for you. Are you ready to join
the ranks of the greatest?
Varsity (7’ x 5’)
Ultimate Travel Tee
Batting Tee
- L ightweight, portable hitting tool
for baseball or softball.
-Heavy-duty, solid plastic
construction.
- A telescoping tee allows you
to adjust the height.
- Telescoping tee allows you to
adjust the height.
- F olding base fits into a convenient,
water-resistant carrying bag.
- Reinforced, full-size home plate
serves as the tee’s base.
Ultimate Travel Tee
12830615
Take your ordinary bases and
make them extraordinary.
Take your plain old diamond
and turn it into your very own
Field of Dreams.
Batting Tee
12810500
SBB-BT
Visit schuttsports.com for details.