Tool Lanyard Brochure

Transcription

ridgegear-tool-lanyard.com
The Range Selector
Eliminates
the danger
of dropping
tools and
keeps them
close at hand.
Tool Lanyard is a
new range of height
safety products from
RidgeGear specifically
designed to eradicate
injuries from falling
tools, a significant
cause of fatalities in
the workplace.
Made in the EU at our
factory in Leek, England,
our Tool Lanyard range is
manufactured to the
same high standards as
our renowned harnesses
and lanyards, so you can
be sure of the quality
from start to finish.
TOOL LANYARDS
Our lanyards come in three different ranges so whatever your
requirement, we have a lanyard to suit your needs.
COLOUR CODED LABELS
Easy capacity identification.
Standard
High quality flat webbing for basic tool restraint.
Please be aware this is only a guide, you should always
weigh your own tools before deciding which Tool Lanyard
to use. Check individual Tool Lanyard information for
actual capacity.
Elastic
Webbing with added elastication for ease of movement and
convenience and basic energy absorbing properties.
CONNECTION LOOP
Shock Absorbers
Made from either advanced Kinetic webbing
or incorporating a neat shock pack,
these lanyards are the pinnacle
of tool safety. In the event
of dropping a heavy tool,
they significantly minimise
the risk of the user
being pulled off a
ladder or platform by
drastically reducing
the peak loads.
For karabiner connection
to harness.
For simple, direct
connection of tools.
Our lanyards have a range
of tethering options that
can be easily choked
around tools with a
captive handle or
waisted tools.
CONNECTORS
In addition to tethers, we have a range of
unique connectors designed to make it easy
to attach almost any of your existing tools.
STANDARD
ELASTIC
SHOCK
ABSORBER
Capacity Ranges
Capacity Ranges
Capacity Ranges
1kg
UP TO 3kg
1kg
UP TO 5kg
5kg
UP TO 10kg
UP TO
CHOKE LOOPS
TETHERING
Use the guide below to select the correct Tool
Lanyard range and capacity for some commonly
used tools.
‘O’ RING
For connecting
tools to your belt
when not in use.
UP TO
UP TO
Standard Range
Sales Hotline: 01538 392616
Our Standard lanyards are designed
to be our entry level product that
does the job perfectly.
RTLS 1
TOOL LANYARD WITH CHOKE LOOP
MAX.
CAPACITY
3kg
They are all made from our high quality
20mm flat webbing which is specially
treated to be water repellent and resistant
to oil and grease.
Elastic Range
The Elastic range of lanyards is the
next step in tool arrest, allowing
the user greater flexibility and
usability.
RTLE 1
ELASTIC TOOL LANYARD WITH CHOKE LOOP
MAX.
CAPACITY
5kg
These are all made from our high quality
20mm elasticated webbing. The benefit
of using elasticated webbing is less slack,
reducing any trip or snag hazards and
keeping all your equipment closer to
your body while also offering basic shock
absorption.
As well as the choke loop method of
connecting a tool, the Standard range has
the option of a clip buckle lanyard (RTLS2).
This lanyard allows the user to keep
several small tools looped, so when a
particular tool is needed it can be swiftly
connected onto the lanyard using the
clip buckle.
Length:
1.22 metres
Web material:
20mm Water Repellent Polyester
Webbing strength:
> 1000 kg
Tool attachment:
190mm Choke Loop
Our Elastic range, in addition to the
standard choke loops, offers a bungee
loop version (RTLE2) for added
versatility.
RTLS 2
RTLS 2A
RTLE 2
TOOL LANYARD WITH CLIP BUCKLE
PLUS PACK OF 3 CHOKE LOOPS (RTLS 2A)
CLIP BUCKLE CHOKE LOOPS (PACK OF 3)
for use with RTLS 2
ELASTIC TOOL LANYARD WITH BUNGEE CHOKE LOOP
MAX.
CAPACITY
1kg
Length:
Length:
0.60 metres (extending to 1.25 metres)
Web material:
20mm Elasticated Polyester
Webbing strength:
> 1000 kg
Tool attachment:
190mm Choke Loop
RTLE 3
MAX.
CAPACITY
MAX.
CAPACITY
1kg
1kg
ELASTIC TOOL LANYARD WITH CHOKE LOOP
AND BELT ATTACHMENT ‘O’ RING
5kg
1.22 metres
Length:
0.26 metres
Length:
Length:
Web material:
Web material:
Web material:
Web material:
Webbing strength:
> 1000 kg
Webbing strength:
> 1000 kg
Webbing strength:
> 1000 kg
Webbing strength:
> 1000 kg
Tool attachment:
190mm Choke Loop (as RTLS 2A)
Tool attachment:
190mm Choke Loop
Tool attachment:
190mm Bungee Choke Loop with Toggle
Tool attachment:
190mm Choke Loop and 50mm ‘O’ ring
RTLS 3
RTLS 4
TOOL LANYARD WITH CHOKE LOOP
TWIN TOOL LANYARD WITH CHOKE LOOPS
RTLE 4
THE BENEFITS OF ELASTIC.
ELASTIC TWIN TOOL LANYARD WITH CHOKE LOOPS
MAX.
CAPACITY
MAX.
CAPACITY
MAX.
CAPACITY
3kg
3kg
5kg
We all know how frustrating it can be when
something keeps getting tangled around your
legs or snagged. The solution - our Elastic
range, it takes up the slack by over half!
OUR ELASTIC RANGE
Resting length 0.60m
STANDARD RANGE OF
THE SAME REACH
Length:
1.22 metres
Length:
1.22 metres x 2
Length:
0.60 metres (extending to 1.25 metres) x 2
Web material:
Web material:
Web material:
Webbing strength:
> 1000 kg
Webbing strength:
> 1000 kg
Webbing strength:
> 1000 kg
Tool attachment:
Tool attachment:
190mm Choke Loop x 2
Tool attachment:
190mm Choke Loop x 2
MAX.
CAPACITY
Extending length 0.65m
SLACK REDUCED BY
650mm
Overall Length 1.25m
NOTE: Karabiners sold separately. See Connectors page.
Shock Absorber Range
Our Shock Absorber range of
lanyards is the pinnacle of our range
of tool lanyards, offering unrivalled
fall protection built in.
RTLA 1
RTLK 1
SHOCK PACK TOOL LANYARD WITH CHOKE LOOP
KINETIC TOOL LANYARD WITH CHOKE LOOP
MAX.
CAPACITY
5kg
If a user drops a heavy tool while working
at height, there is a very real danger that
they could be pulled off a ladder or
platform by the falling tool. Our Shock
Absorber range is specifically designed to
significantly reduce that risk.
The range is split into two: the unique
Shock Pack version and the top-of-therange Kinetic version, both offering
outstanding safety characteristics.
THE DEPLOYED SAFE
DISTANCE BENEFITS OF
USING A SHOCK ABSORBER
TOOL LANYARD.
MAX.
CAPACITY
10kg
Our Kinetic tool lanyards are our top-of-therange product offering unrivalled protection
for the user.
Kinetic is our unique webbing specially designed and
developed to reduce the potentially devastating
shock involved in the event of a fall. It was originally
developed for our fall arrest lanyards but the principle
is exactly the same and equally important in the event
of a falling tool.
Length:
1.25 metres
Web material:
Webbing strength:
> 1000 kg
Tool attachment:
210mm Choke Loop
A Kinetic tool lanyard significantly reduces the risk of
a dropped tool dragging the user off a platform and,
because the deployed distance is less than the shock
pack tool lanyard, it can reduce the risk below too.
RTLA 2
RTLK 2
SHOCK PACK TOOL LANYARD WITH CHOKE LOOP
KINETIC TOOL LANYARD WITH CHOKE LOOP
MAX.
CAPACITY
Length:
1.25 metres
Web material:
25mm / 20mm Water Repellent Polyester
Webbing strength:
> 1000 kg
Tool attachment:
210mm Choke Loop
RTLK 3
5kg
MAX.
CAPACITY
TWIN KINETIC TOOL LANYARD WITH CHOKE LOOPS
10kg
10kg
MAX.
CAPACITY
3kg
One of the additional benefits of using a
shock absorber tool lanyard is that once
deployed it can carry the tool beyond
the user’s feet, further reducing injury
from a swinging tool.
STANDARD
TOOL
LANYARD
SHOCK
ABSORBER
TOOL LANYARD
Length:
1.25 metres
Length:
1.25 metres
Length:
Kinetic 1.25 metres / Standard 1.22 metres
Web material:
Web material:
Web material:
Webbing strength:
> 1000 kg
Webbing strength:
> 1000 kg
Webbing strength:
> 1000 kg
Tool attachment:
Tool attachment:
Tool attachment:
210mm Choke Loop x 2 and 50mm ‘O’ ring
THE SHOCK ABSORBING
BENEFITS EXPLAINED.
Using our extensive in-house testing lab, we
are able to show the radical reduction in the
forces exerted on the user and the virtual
eradication of the dangerous ‘bouncing’
effect when using one of our Shock Absorber
Tool Lanyards.
The table opposite shows the force traces
from our tests when a 10kg tool is dropped
from a height of just 2.5 metres. You can see
that with a standard tool lanyard a 10kg tool
will be nearly 30 times its original weight!
NOTE: Karabiners sold separately. See Connectors page.
MAX.
CAPACITY
3.0
2.5
A STANDARD TOOL LANYARD measures nearly 3kN,
that’s a massive 300kg for a 10kg tool!
30 x HEAVIER
25 x HEAVIER
2.0
kN
1.5
OUR SHOCK ABSORBER TOOL LANYARD measures
just 0.7kN, that’s just 70kg for a 10kg tool!
20 x HEAVIER
15 x HEAVIER
1.0
BOUNCING EFFECT
10 x HEAVIER
0.5
5 x HEAVIER
0.0
Connectors Range
In addition to our range of tool
lanyards we have a comprehensive
range of connectors.
RTLX 1
RTLX 2
TOOL TIE WITH BOLT TIGHTENING (PACK OF 5)
for use with RTLW 1/2/3
MAX.
CAPACITY
TOOL TIE WITH HOLED STEEL CONNECTOR (PACK OF 5)
for use with RTLX 1
MAX.
CAPACITY
1kg
All our lanyards come with a choke loop
which can be used with tools that have
an opening, but what happens when
you have an existing tool with no
opening, such as a hammer?
1kg
WHICH CONNECTOR DO
I NEED FOR MY TOOLS?
We’re sure you’ll find your own favourite and
safest way of connecting depending on your tools,
but here is a short guide to the most common
tools and recommended methods of tethering.
Well, we’ve got that covered too,
because with our Tool Ties you can
connect your existing tool by simply
tightening around an appropriate
section.
Length:
240mm
Length:
240mm
Width:
10mm
Width:
10mm
RTLR 1
7mm Hex Bolt
Closure type:
7mm Hex Bolt
ACCESSORY CORD
Closure type:
RTLW 1
RTLW 2
LOOPED TOOL CONNECTORS (PACK OF 5)
for use with RTLX 1
FLAT TOOL CONNECTORS (PACK OF 5)
for use with RTLX 1
MAX.
CAPACITY
Small or lightweight tools
with holes.
RTLW 3
1kg
MAX.
CAPACITY
D-RING TOOL CONNECTORS (PACK OF 5)
for use with RTLX 1
1kg
MAX.
CAPACITY
1kg
with any RTLC if
needed.
Lightweight tools without holes
or openings.
RTLX 1
TOOL TIE
Length:
70mm
Length:
60mm
Length:
70mm
Web material:
Web material:
Web material:
Attachment type:
Folded loop for use with a karabiner
Attachment type:
Flat loop for use with a karabiner
Attachment type:
Flat loop with D ring
RTLW 4
RTLR 1
RTLC 1
DOUBLE D-RING CHOKE STRAP (PACK OF 5)
2MM ACCESSORY CORD
for connection of lightweight holed tools
STEEL SNAP GATE KARABINER
for tool connection, use with RTLR 1
MAX.
CAPACITY
1kg
MAX.
CAPACITY
1kg
with RTLW 1/2/3
and any RTLC.
Or RTLW 4.
MAX.
CAPACITY
1kg
Heavier tools with a waist
or an opening.
Choke Loop
STANDARD ON ALL
TOOL LANYARDS
Length:
340mm
Gate opening:
8mm
Web material:
Length:
Available in 10m lengths
Size:
50mm x 25mm
Attachment type:
Flat loop for use with a karabiner
Material:
2mm Nylon cord
Closure type:
Snap Gate
with or without
RGK 1 or RGK 4
Connectors Range
CONTINUED
RTLC 2
RTLC 3
STEEL SNAP GATE KARABINER (IN 2 SIZES)
for tool connection
STEEL SCREW GATE KARABINER (IN 2 SIZES)
for tool connection
MAX.
CAPACITY
MAX.
CAPACITY
3kg
A
MAX.
CAPACITY
B
5kg
A
MAX.
CAPACITY
B
5kg
10kg
Gate opening:
A: 6mm / B: 8mm
Gate opening:
A: 5mm / B: 5mm
Sizes:
A: 50mm x 25mm / B: 60mm x 30mm
Sizes:
A: 40mm x 20mm / B: 50mm x 25mm
Closure type:
Snap Gate
Closure type:
Screw Gate
RGK 1
RGK 4
STEEL SCREW GATE KARABINER
for harness connection
ALUMINIUM TWIST LOCK KARABINER
for harness connection
MAX.
CAPACITY
DEALER DETAILS
10kg
MAX.
CAPACITY
10kg
Gate opening:
18mm
Gate opening:
22mm
Size:
108mm x 58mm
Size:
110mm x 75mm
Closure type:
Screw Gate
Closure type:
Twist Lock
RIDGEGEAR - THE COMPLETE
HEIGHT SAFETY SOLUTION
At RidgeGear we pride ourselves on
being able to manufacture and provide
a complete range of products and
services for anyone working at height.
Our extensive product catalogue has
32 pages of innovative and essential
products alongside helpful information.
For your free copy contact us:
Tel: 01538 392616
©2014 RidgeGear Limited
or email: sales@ridgegear.com
All the information and imagery within this brochure is subject to copyright.
While we make every effort to ensure all the information in this brochure is correct and up-to-date, it is always worth checking with us before ordering. We reserve the right to change
product specifications when necessary without prior notice.
USE THE QR CODE TO DOWNLOAD
HEAD OFFICE
Nelson Street,
Leek,
Staffordshire
ST13 6BB
United Kingdom
Tel: +44 (0)1538 392616
Fax: +44 (0)1538 387350
Email: sales@ridgegear.com
ridgegear.com
PART OF THE UNITEX GROUP
FT5954-10/2014/1K
Designed and produced by www.fronttwo.com
THE UNITEX APP

Tool Lanyard Brochure

Transcription

Similar documents

TEMPLATE HOW-TO MAKE A GUM PASTE BOW

Self Retracting Lanyard Leaflet

Manifolds - AXON Energy Products

Portable Antenna Support

Building a Windom HF Antenna

TD4 X-說明書(o)

Product Experience

If your safety harness is weighing you down

Overview of the Bike Course (radar and Smedleys