Office Ergonomic Analysis and Workplace Design
Transcription
Office Ergonomic Analysis and Workplace Design
Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Office Ergonomics: Recognizing Hazards and Identifying Solutions Presented by: Jonathan Tyson, MASc, CPE Workplace Consultant Workers’ Compensation Board of Nova Scotia March 25, 2011 Session Overview • In this session, you will: – Discover what design related hazards exist in almost all office workplaces – Learn why these hazards can lead to discomfort / pain, reduced performance and increased costs – Begin to ‘see’ the design-related hazards that may contribute to discomfort / pain in office workplace settings. Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 1 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Session Objectives • At the end of this session you will: – Know why office ergonomics is important – Understand why and how poor design contributes to pain and discomfort – Be able to identify design related hazards in your office workplace – Know how to make simple changes to the setup of computer workstations and the equipment in order to: improve the health and well-being of workers reduce costs for your organization! First Things First! • Computerized office workplaces have hazards! – Research shows that exposure to these hazards can lead to increased pain / discomfort, reduced performance and increased costs reducing exposure to these hazards can reduce the risk for workers, improve performance and reduce costs Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 2 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 What do you think is the biggest ‘hazard’ most office workers are exposed to? First Things First! • The focus of this workshop is on design-related hazards – Physical design Equipment design, set-up, etc. – Organizational / task design Work organization, cognitive and physical variety, work methods, etc. • The worker is not a hazard – We need to design for them! Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 3 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Ergonomics - Definition • Ergonomics is a systematic process for designing the workplace for people through the application of our knowledge of humans to: – – – – the equipment they use the environments in which they work the tasks they perform and the management systems in which they work • The key to good ergonomics is taking a human-centred view – Capabilities and needs of the users must be taken into account Office Ergonomics • Office Ergonomics tends to focus on computer workstations – Designing workstation components to fit the user and the task(s) they are performing • What design features do we need to consider when looking at the ergonomics of an office / computer workstation? Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 4 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Office Ergonomics • Key workstation design features: – Work surfaces and work space, leg room and knee space – Chair design, fit, comfort – Set-up of keyboard, input devices, telephones – Documents, paper-work – Other equipments (calculators, etc) – Filing cabinets, shelves – Space (for movement) Office Ergonomics • We also need to consider – The specific task(s) being performed Accounting is different than computer based drafting, which is different than customer service – The work environment – Work organization issues Opportunities for mental and physical variety Opportunities for rest / recovery – Other hazards that might exist (manual material handling, etc.) Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 5 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 The Goals Ergonomics • Optimize the ‘fit’ between – the person – the task(s) they are required to perform – the equipment needed to perform the task • Maximize comfort, health and performance • Ensure that individual needs are addressed. What are some ‘individual needs’ that we need to consider? Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 6 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 What are the consequences of poor design in office workplaces? Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 7 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Consequences of Poor Design • Pain and discomfort – – – – MSIs Headaches Neck and shoulder Eye discomfort • Vision concerns – Dry eyes • Errors • Low productivity • Poor customer service Musculoskeletal Disorders (MSDs) • Types of MSDs – General Muscle Pain Forearm, arm Shoulder, upper back – Lower Back Pain Muscles Discs / nerves – Rotator Cuff Syndrome Shoulder – – – – Tension Neck Syndrome Tendonitis Tenosynovitis Carpal Tunnel Syndrome Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 8 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Key MSD Hazards Force Repetition Posture Key MSD Hazards • Force, posture, and repetition hazards are all influenced by time • Time / Duration – The longer the exposure to the hazard the greater the risk 20 minutes vs. 4 hours – Long duration tasks / postures with little or no opportunity for recovery / postural change are higher risk Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 9 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Other MSD Hazards • Some other MSD hazards found in offices include: – – – – – Cold temperatures Hot work environments Lighting / Glare Work organization Work methods Key MSD Hazards in Offices • Can you think of any force-related hazards we will find in an office? – Low level forces for long duration Gripping mice ‘Fingers’ hovering over mouse buttons Keying Tasks ‘Force’ to maintain sitting & working postures – High level forces Lifting of paper boxes Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 10 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Key MSD Hazards in Offices • Can you think of any awkward / sustained postures found in an office? – Sitting – Sitting while not using the backrest, feet not fully supported, no lumbar support – Reaching, wrist extension / deviation when mousing – Wrist extension and deviation when keyboarding – Neck extension, ‘chin out’, neck rotation – Holding phone handset between ear and shoulder Key MSD Hazards in Offices • Can you think of any repetition-related hazards found in an office? – Repetitive keyboarding – Repetitive mousing – Repetitive neck flexion and rotation when viewing documents Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 11 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Key MSD Hazards in Offices • Duration – Performing the same tasks, adopting the same postures All day, day after day – Lack of physical variety is a major issue in offices Lack of mental variety is also often a problems – Sitting for long periods with little or no posture change is a major hazard in office work settings Design-Related Hazards • A mismatch between the design / set-up of work, the person doing the work, and / or the tasks being performed • Poor design contributes to awkward and hazardous working postures • Awkward / hazardous postures can lead to pain and discomfort • Design also impacts performance, errors, job satisfaction, operational costs, etc. Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 12 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 We are never without the best tools for recognizing designrelated hazards in offices! What do you think these tools are? Key Point To Remember … • There is no such thing as an ergonomic: – Chair, keyboard, mouse!! • Why is this important to remember? • Nothing is in of itself ergonomic … a work system could be described as being ergonomic but individual components are only ergonomic if they: – Match the task, the user, the environment and ‘fit’ the other components in the system Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 13 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Recognizing Hazards • Postural hazards are most common hazards in offices – Most of us can easily see / recognize when others are working in awkward / non-neutral postures • We need to ask the worker about their concerns, discomfort, issues • We need to find out what the worker does and how perform their job tasks Office Ergonomics Checklists • A checklist can be used to help guide your observations and questions – Remember that a checklist can never be all inclusive • Use the one provided if it works for you! • There are lots of them out there! • Search the Internet and find one that works for you! Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 14 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Common Design Issues Keyboard too high or low - on high work surface - on poorly designed / improperly adjusted support Why is this an issue? Common Design Issues Mouse and keyboard at different heights - keyboard support too small for mouse - mouse under a work surface so it can’t be used comfortably Why is this an issue? Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 15 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Common Design Issues Mouse too far away from the user’s side - arm / elbow must be moved away from the body Why is this an issue? Keyboard / Mouse Supports Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 16 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Common Design Issues Chair does not provide optimal fit / comfort - adjustments not used / understood - adjustments / design not adequate - chair too large / too small Common Design Issues Chair Issues - seat pan too long / wide - arm rests too wide - lack of adequate lumbar support - armrests that are too long / not padded - armrests that are not adjustable - chair will not adjust high or low enough Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 17 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Common Design Issues Monitor set-up / location - too far away / too close - too high / too low - not set-up so that it is directly in front of user Why is this an issue? Common Design Issues Work surfaces that are too high / too low - for paper-based tasks such as reading, writing, editing, etc. - for keyboarding - for legs (too low) Why is this an issue? Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 18 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Common Design Issues Inadequate knee space, room for legs / feet - due to file drawers - due to legs and other workstation structures - due to shoes, boxes, etc. Why is this an issue? Common Design Issues Reading from / referring to documents while keying - documents placed to one side / at an angle - documents flat on the work surface Writing on documents while working at computer - documents off to one side - far reach over keyboard Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 19 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Common Design Issues Telephone use with the computer or when working with documents - holding the telephone handset between shoulder and ear - reaching for phone to dial / answer Why is this an issue? Common Design Issues Contact stress with hard or sharp surfaces Why is this an issue? Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 20 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Common Design Issues Glare on screen - direct from windows or lights - indirect due to bright visual background such as windows or bright lights behind the monitor Why is this an issue? Common Design Issues Using a laptop in an office - Keyboard too high - Monitor too low - Text / screen too small Why is this an issue? Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 21 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Common Design Issues Sitting for too long - even good sitting postures, if held for too long, can lead to pain and discomfort - even with the best chair, prolonged sitting can lead to discomfort Why is this an issue? Recognizing Hazards Image 1: what do you see? Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 22 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Recognizing Hazards Image 2: what do you see? Recognizing Hazards Image 3: what do you see? Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 23 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Simple Solutions for Design-Related Hazards in Computerized Offices Simple Solutions - Seating • Find a chair that fits the user • One style / model of chair will NOT fit all potential users – small and extra large folks can be very hard to fit • Users should have the opportunity to try chairs before purchase – Five days minimum recommended Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 24 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Simple Solutions - Seating Simple Solutions - Seating • Adjustable features that all chairs should have: – Seat Height – Seat Pan Depth Critical adjustment – Seat Lock/Rocking – Seat Tension – Back Rest Height – Back Rest Angle – Back Rest Lock/Rocking – Lumbar Support Height – Lumbar Support Amount – Arm Rest Height / Width Critical adjustment – If Headrest, Adjustable for Height and Angle Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 25 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Simple Solutions - Seating • Ensure seat pan depth is not too long – ~2” free space before back of knee – Sometimes very hard to find a chair with a short enough seat pan • Set seat pan at correct height – Feet firmly on the floor – Back up against lumbar support – Knees slightly lower than hips • Lumbar support is set to provide firm support the small of back Simple Solutions - Seating • Armrests at correct height / width – If can’t be set to correct height / width consider removing them • Back rest angle set for a slightly reclined sitting posture • The user knows how to use all of the chair’s adjustable features – And why they should be used! Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 26 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Key Point To Remember • Many people think a good chair will solve all their problems! • The best chair in the world is not going to compensate for a bad workstation design Simple Solutions – Keyboard / Mouse • Keyboard and mouse on same surface, at correct height - shoulders relaxed - elbows at approx. right angles, wrists straight • Can be on desk surface or with keyboard / mouse tray Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 27 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Simple Solutions – Keyboard / Mouse • Keyboard / mouse tray designed to fit the workstation – wide enough for both the keyboard & mouse – adjusted so top of keyboard is at seated elbow height – keyboard and tray should be flat – support should be designed to ‘fit’ the workstation Simple Solutions – Keyboard / Mouse • A couple of points about keyboard / mouse trays – Well-designed trays can be very beneficial – With most workstations they do tend to push you back away from your other work surfaces Reaching for phone, etc. Reaching over to read / write on documents • Palm / wrist rests – good or bad? Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 28 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Simple Solutions – Keyboard / Mouse • When the mouse is too far away from the side of the body – Change mouse to left side – Use keyboard without number pad or number pad on the left side Simple Solutions –Alternative Mouse • Some people can really benefit from alternative mice / input devices Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 29 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Simple Solutions – Monitors • Always buy monitors with height adjustable stands • Set the top of monitor at eye level – ~15 degrees downward gaze angle to centre of screen – Unless user wearing bifocals (then lower) • Monitor set as far away as practical – User can easily see / read information / text on screen Simple Solutions – Monitors • Move monitors so they are aligned with the letter ‘H’ on the keyboard – for users who type – may need to adjust the location of the keyboard / mouse adjustable mechanism Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 30 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Simple Solutions – Documents • Use in-line document holders – Documents in-line with monitor and keyboard – Holder between monitor and keyboard – Documents angled up towards the user’s face • Use an in-line document holder that is stable / strong enough to allow for writing – Consider one where the surface can be pull out over the keyboard Simple Solutions – Documents Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 31 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Simple Solutions – Workstations • Work surfaces too high / high – Adjustable height keyboard / mouse supports – Raise / lower work surface heights 1 – 2” above seated elbow height Feet firmly supported on floor Sitting back in chair – Raise seat pan height / use a foot rest only as a last resort! Simple Solutions – Workstations • Buy / use easily adjustable workstations – For seated work – Sit / Stand Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 32 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Simple Solutions – Workstations ? ? ? • Provide good work surface area for all job tasks • Ensure adequate knee room – 30” min free space • Ensure adequate leg / foot space • Provide a separate work space for computer- and paper-based tasks • Provide adequate, easily accessible storage Instructions · Choose the workstation configuration that most closely applies. · Where appropriate, indicate chair position relative to the workstation. · Indicate relavent dimensions. · Is there a keyboard support in place? (yes / no) · Does it adjust in height? (yes / no) · Is the mouse on a separate worksurface? (yes / no) · Is the mouse higher or lower than the keyboard? (higher / lower / same) · Is the monitor 90° to an outside light source? (yes / no) · Is there indirect glare on the monitor from an overhead light source? (yes / no) About Footrests • Footrests are a MUST if your feet don’t rest firmly on the floor! • BUT … everyone can benefit from using a good foot rest – Vary the posture of your feet & legs – Push you back into your chair! Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 33 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Simple Solutions – Glare • Position monitor perpendicular to windows and between overhead light fixtures • Use blinds • Use indirect lighting or welldesigned louvers – Parabolic / egg crate • Use matte surfaces • Consider task lighting for documents Simple Solutions – Laptop Use • Use a docking station for the laptop – Separate, adjustable height monitor – External keyboard and mouse • Limit use to < 2 hr if external devices not provided Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 34 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Simple Solutions – Telephones • Provide a headset – Wireless headsets are preferred – Consider accessory that allows for automatic lifting of phone handset • Where practical consider using a speaker phone • Move phone close to front edge of work surface – Even when using a headset Simple Solutions – Contact Stress • Ensure work surfaces are at the correct height • Ensure keyboard / mouse are at the correct height • Consider a palm rest – Use when resting not when keying / mousing – Make sure there isn’t pressure on the wrist Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 35 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Simple Solutions – Sitting • Stand up – 5 minutes each hour • Move about – When possible stand up and walk about – Use wireless headsets – Don’t provide local printers – Take breaks / meals away from desk • Use sit / stand workstations Simple Solutions – Sitting • Interject keying tasks with other work tasks to add variety and a break • Use natural pauses in work to relax muscles (e.g. stand occasionally when on telephone, remove hands from keyboard when waiting for computer) • Vary your posture by rearranging adjustments of furniture (e.g. recline and work for 10 minutes every hour) Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 36 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Thank you for coming! Any questions? HumanScale – 500 Big Board Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 37 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 HumanScale – 400 Diagonal Board HumanScale – 800 Radius Ergonomic Accessories Ergonomic Accessories Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 38 Office Ergonomics: Recognizing Hazards and Identifying Solutions May 25, 2011 Banana Board Reversible Corner Platform Workrite Jonathan Tyson, MASc, CPE Workers Compensation Board of Nova Scotia 39