G A U G E B LO CK S REFEREN C E G A U GES

Transcription

GAUGE BLOCKS
REFERENCE GAUGES
E
E-1
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Gauge Blocks
Reference Gauges
CONTENTS
Gauge Blocks
Gauge Blocks
Features and Accuracies
Metric Gauge Block Sets
Inch Gauge Block Sets
Micrometer Inspection Gauge Block Set
Caliper Inspection Gauge Block Set
Individual Metric Steel Gauge Blocks
Individual Inch Steel Gauge Blocks
Wear Block Sets
Gauge Block Accessory Sets
Maintenance Kit for Gauge Blocks
Ceraston
Quick Guide to Gauge Blocks
Reference Gauges
Height Master
Height Master Accessories
Check Master
High Accuracy Check Master
Precision Square
Combination Square Set
Steel Rules
Thickness Gauges
Radius Gauges
Thread Pitch Gauges
Digital Universal Protractor
Universal Bevel Protractor
Spring Dividers and Calipers
Precision Levels
Bench Centres
Black Granite Surface Plates
Reference Gauges
E-2
E-3
E-5
E-6
E-7
E-8
E-9
E-11
E-12
E-13
E-15
E-16
E-17
E-19
E-20
E-21
E-22
E-23
E-24
E-25
E-26
E-27
E-28
E-29
E-29
E-30
E-30
E-31
E-32
E
Gauge Blocks
Features and Accuracies
Features of Mitutoyo Gauge Blocks
Grade and Application
Mitutoyo offers rectangular steel and ceramic (CERA Blocks) gauge blocks for use as length standards
in variously sized sets and as individual blocks. Accessories include wear blocks in tungsten carbide and
ceramic in the standard thicknesses. Mitutoyo gauge blocks are recognized to be of the highest quality
and are available in various grades to meet every need in respect of working conditions, environment and
application.
Grade 2:
These gauge blocks are intended for shop floor use to set and
calibrate fixtures as well as precision instruments.
Grade 1:
This grade is used within an inspection area to verify the
accuracy of plug and snap gauges as well as for setting
electronic measuring devices.
Grade 0:
These higher accuracy gauges are intended for use within a
controlled environment by skilled inspection staff. Mainly used
as reference standards for setting high precision measuring
equipment and for the calibration of lower grade gauge
blocks.
Accuracy
As a world-leading precision measuring equipment manufacturer, Mitutoyo is certified by the Japanese
government as an accredited calibration laboratory, which means that the accuracy of its gauge blocks
is guaranteed through traceability to the Metrology Management Centre of the National Institute of
Advanced Industrial Science and Technology (AIST).
Wringing
Lapping measuring surfaces is one of Mitutoyo’s specialties. Our advanced technique, developed over
more than half a century, enables us to achieve the optimum flatness and surface finish needed for
gauge blocks and thus maximize the wringing force.
Abrasion Resistance and Dimensional Stability of Steel Blocks
High-carbon high-chrome steel is employed to satisfy a variety of the material characteristics required
for gauge blocks. Our advanced heat treatment technology for steel blocks, which involves repeated
temperature cycling, simultaneously achieves excellent abrasion resistance and minimizes any change in
length over time.
CERA Blocks
CERA blocks are made of a ceramic material with a superior surface finish, created by Mitutoyo’s ultraprecision machining techniques, that provides a premium quality block with significant advantages:
1. Corrosion Resistant
Anti-corrosion treatment is not required when handled normally (i.e. with fingers), resulting in simple
maintenance and storage.
2. No Burrs Caused by Accidental Mishandling
Since the CERA Block is very hard, it will not scratch easily and is highly resistant to burrs. If a burr is
formed, it can easily be removed with a ceramic deburring stone (Ceraston).
3. Abrasion Resistant
CERA Blocks have 10 times the abrasion resistance of steel gauge blocks.
Steel
Abrasion loss data
Abrasion loss (µm)
E
0.4
Silicon nitride
Tungsten carbide
0.2
CERA Block
0
2000
4000
6000
Sliding distance (m)
4. Dimensionally Stable
CERA Blocks are free from dimensional change over time.
5. Clearly Marked Sizes
Black characters, indicating the nominal length, are
inscribed by laser and are clearly visible against the
white surface of the block.
6. Non-Magnetic Nature Prevents Steel Swarf
Contamination
7. High Wringing Force
Superior flatness and surface finish provides
maximum wringing force.
E-3
8000
The following table can be used to select the gauge block
grade according to usage (specified by DIN861, BS4311, and
JIS B 7506).
Usage
Applications
•Mounting tools and cutters
Workshop
•Manufacturing gauges
use
•Calibrating instruments
•Inspecting mechanical parts, Inspection tools, etc.
use
•Checking the accuracy of gauges
•Calibrating instruments
•Checking the accuracy of gauge blocks for workshop
Calibration •Checking the accuracy of gauge use
blocks for inspection
•Checking the accuracy of instruments
Grade
2
1 or 2
1 or 2
0 or 1
0
Constructing a Gauge Block Stack
The following points should be noted when constructing a
gauge block stack:
1.Use as few gauge blocks as possible to obtain the required length by selecting thick blocks wherever possible.
2.Select the block for the least significant digit first, then
work back through the more significant digits until the
required length is attained.
3.There are multiple combinations for the integer part of a
length. To reduce wear as much as possible, do not always
use the same gauge blocks.
Example: Required length = 45.6785 mm
•For a 1 mm-based gauge block set (112 pcs.)
1.0005
1.008
1.17
17.5
+ ) 25.0
45.6785 mm
•For a 2 mm-based gauge block set (112 pcs.)
2.0005
2.008
2.17
14.5
+ ) 25.0
45.6785 mm
Note: For details on the recommended method of wringing, refer to
page E-17.
Mitutoyo Gauge Blocks and
Inspection Certificates
A Certificate of Inspection is furnished with all Mitutoyo
gauge blocks with a serial number on the box (in the case
of sets) and an identification number on each block. The
deviation of each block from nominal length, at the time of
inspection, is stated. For this inspection, each gauge block
is measured relative to the upper level master using a gauge
block comparator.
8. Characteristics of CERA Blocks Compared with other Gauge Block Materials
Property
CERA Block
(ZrO2)
1350
9.3±0.5
1270
7
20.6
0.3
6.0
2.9
Hardness (HV)
Coefficient of thermal expansion (10-6/K)
Flexural strength by 3-point bending (MPa)
Fracture toughness K1c (MPa•m1/2)
Young’s modulus x10-4 (MPa)
Poisson’s ratio
Specific gravity
Thermal conductivity (W/m•k)
Steel
(Fe)
800
10.8±0.5
1960
120
20.6
0.3
7.8
54.4
Material
Tungsten Carbide
(WC-Co)
1650
5.5±1.0
1960
12
61.8
0.2
14.8
79.5
Silicon nitride
(Si3N4)
1500
2
580
6.5
28.4
0.3
3.2
16.7
Note: Ceramics have the advantage of a slow response to temperature changes due to the low thermal conductivity. However, caution is required when using CERA blocks in
an environment subject to rapid temperature change.
9. Closest Expansion Coefficient to Steel
The thermal expansion coefficient of a CERA Block is quite similar to that of a steel gauge block.
Difference
in dimension
(µm) 3
Silicon nitride
2
Tungsten carbide
1
17
18
CERA Block
19
20
21
22
23
Temperature (C)
–1
–2
–3
Differences in size between alternative
gauge block materials and steel that are
obtained when measuring over a length
of 100mm at each temperature.
10. Highly Resistant to Impact Damage
The CERA Block material is one of the toughest ceramics. It is extremely difficult to crack a CERA block in
normal use.
ACCURACY SPECIFICATIONS: BS 4311: Part 1: 1993 (UK)
Inch
Grade*
0
1
2
Tolerance on deviation of measured central length
Parallelism
Flatness
Parallelism
Flatness
Parallelism
Flatness
Nominal length (inch)
over 0.4
over 1
over 2
over 3
up to 1
up to 2
up to 3
up to 4
±6 µin
±8 µin
±10 µin
±12 µin
4 µin
5 µin
4 µin
±10 µin
±12 µin
±15 µin
±20 µin
±25 µin
6 µin
7 µin
8 µin
6 µin
±20 µin
±25 µin
±30 µin
±40 µin
±50 µin
12 µin
14 µin
10 µin
over 0
up to 0.4
±5 µin
Metric
Grade*
0
1
2
Parallelism
Flatness
Parallelism
Flatness
Parallelism
Flatness
Nominal length (mm)
over 10
over 25
over 50
over 75
up to 25
up to 50
up to 75
up to 100
±0.15 µm
±0.2 µm
±0.25 µm
±0.3 µm
0.1 µm
0.12 µm
0.1 µm
±0.25 µm
±0.3 µm
±0.4 µm
±0.5 µm
±0.6 µm
0.16 µm
0.18 µm
0.2 µm
0.15 µm
±0.5 µm
±0.6 µm
±0.8 µm
±1.0 µm
±1.2 µm
0.3 µm
0.35 µm
0.25 µm
over 0
up to 10
±0.12 µm
* At 20ºC
E-4
E
Gauge Blocks
SERIES 516 – Metric Gauge Block Sets
•Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of
industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required by the
target applications, the level of convenience desired (larger sets offer more combination possibilities)
and the environmental conditions in which they will be used.
CERA 88-block set
Steel 32-block set
Steel 103-block set
E
CERA 47-block set
Steel 47-block set
Steel 88-block set
SPECIFICATIONS
Steel 9-block set
Steel
Blocks per set
Code No.
1 mm base block sets
516-942-11
516-943-11
103
516-944-11
516-970-11
516-971-11
88
516-972-11
516-962-11
516-963-11
47
516-964-11
516-966-11
516-967-11
32
516-968-11
0.001 mm step block sets
516-982-11
516-983-11
9
516-984-11
Grade
Set configuration
0
1
2
0
1
2
0
1
2
0
1
2
1.005 mm, 1.01-1.49 mm by 0.01 step,
0.5-24.5 mm by 0.5 step,
25-100 mm by 25 step
1.0005 mm, 1.001-1.009 mm by 0.001 step,
1.01-1.49 mm by 0.01 step, 0.5-9.5 mm by 0.5 step,
1.005 mm, 1.01-1.19 mm by 0.01 step,
1.2-1.9 mm by 0.1 step, 1-9 mm by 1 step,
1.005 mm, 1.01-1.09 mm by 0.01 step,
10-30 mm by 10 step, 60 mm
0
1
2
1.001-1.009 mm by 0.001 step
Grade
Set configuration
0
1
2
0
1
2
1.0005 mm, 1.001-1.009 mm by 0.001 step,
1.01-1.49 mm by 0.01 step, 0.5-9.5 mm by 0.5 step,
Price
£2100.00
£1900.00
£1600.00
£1900.00
£1500.00
£1130.00
£1100.00
£900.00
£800.00
£800.00
£550.00
£490.00
£229.00
£177.00
£156.00
CERA
Blocks per set
Code No.
1 mm base block sets
516-370-11
516-371-11
88
516-372-11
516-362-11
516-363-11
47
516-364-11
1.005 mm, 1.01-1.19 mm by 0.01 step,
E-5
Price
£3410.00
£2840.00
£2390.00
£1860.00
£1590.00
£1360.00
SERIES 516 – Inch Gauge Block Sets
•Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of
industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required by the
target applications, the level of convenience desired (larger sets offer more combination possibilities)
and the environmental conditions in which they will be used.
E
CERA 81-block set
SPECIFICATIONS
Steel
Blocks per set
81
49
Code No.
516-903-11
516-904-11
Grade
1
2
516-911-11
1
516-912-11
Code No.
516-302-11
516-303-11
516-304-11
Set configuration
0.1001-0.1009" by 0.0001 step, 0.101-0.149" by
0.001 step, 0.05-0.95" by 0.05 step, 1-4" by 1 step
Price
£1700.00
£1050.00
£893.00
2
0.1001-0.1009" by 0.0001 step, 0.101-0.109" by
0.001 step, 0.01-0.19" by 0.01 step, 0.2-0.9" by
0.1 step, 1-4" by 1 step
Grade
0
1
2
Set configuration
0.1001-0.1009" by 0.0001 step,
0.101-0.149" by 0.001 step,
0.05-0.95" by 0.05 step, 1-4" by 1 step
Price
£5770.00
£2640.00
£2010.00
£804.00
CERA
Blocks per set
81
E-6
Gauge Blocks
SERIES 516 – Micrometer Inspection Gauge Block Set
Optional Accessory
•Set comprises ten gauge blocks and an optical parallel.
•For adjusting and calibrating outside micrometers.
516-607:
Gauge block holder
£353.00
516-607
(The gauge blocks are optional.)
E
516-106-10
SPECIFICATIONS
Metric
Blocks per set
Steel
10
Code No.
Grade
Set configuration
516-106-10
0
2.5, 5.1, 7.7, 10.3, 12.9, 15, 17.6, 20.2,
22.8, 25 mm, Optical parallel (t = 12 mm)
Price
£460.00
Sample application
E-7
SERIES 516 – Caliper Inspection Gauge Block Set
•Set includes two gauge blocks and a setting ring.
•For adjusting and calibrating calipers.
E
516-122-10
SPECIFICATIONS
Metric
Blocks per set
Steel
2
Code No.
Grade
Set configuration
516-122-10
1
41.3, 131.4 mm,
Setting ring (ø20 mm), Glove
E-8
Price
£537.00
Gauge Blocks
Individual Metric Steel Gauge Blocks
611675-131
E
SPECIFICATIONS
Metric
Length (mm)
0.1
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19
0.2
0.21
0.22
0.23
0.24
0.25
0.26
0.27
0.28
0.29
0.3
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.4
0.41
0.42
0.43
0.44
0.45
0.46
0.47
Code No.
611821-131
611860-131
611861-131
611862-131
611863-131
611822-131
611864-131
611865-131
611866-131
611867-131
611823-131
611868-131
611869-131
611870-131
611871-131
611824-131
611872-131
611873-131
611874-131
611875-131
611825-131
611876-131
611877-131
611878-131
611879-131
611826-131
611880-131
611881-131
611882-131
611883-131
611827-131
611884-131
611885-131
611886-131
611887-131
611828-131
611888-131
611889-131
Price
£98.00
£63.30
£98.00
£63.30
£98.00
£63.30
£98.00
£63.30
£98.00
£63.30
£85.00
£95.00
£95.00
£95.00
£95.00
£95.00
£95.00
£95.00
£95.00
£95.00
£70.90
£80.00
£80.00
£80.00
£80.00
£80.00
£80.00
£80.00
£80.00
£80.00
£65.00
£65.00
£65.00
£65.00
£65.00
£65.00
£65.00
£65.00
Length (mm)
0.48
0.49
0.5
0.51
0.52
0.53
0.54
0.55
0.56
0.57
0.58
0.59
0.6
0.61
0.62
0.63
0.64
0.65
0.66
0.67
0.68
0.69
0.7
0.71
0.72
0.73
0.74
0.75
0.76
0.77
0.78
0.79
0.8
0.81
0.82
0.83
0.84
0.85
Code No.
611890-131
611891-131
611506-131
611892-131
611893-131
611894-131
611895-131
611896-131
611897-131
611898-131
611899-131
611900-131
611901-131
611902-131
611903-131
611904-131
611905-131
611906-131
611907-131
611908-131
611909-131
611910-131
611911-131
611912-131
611913-131
611914-131
611915-131
611916-131
611917-131
611918-131
611919-131
611920-131
611921-131
611922-131
611923-131
611924-131
611925-131
611926-131
E-9
Price
£65.00
£65.00
£40.00
£40.00
£40.00
£40.00
£40.00
£40.00
£40.00
£40.00
£40.00
£40.00
£40.00
£40.00
£40.00
£40.00
£40.00
£40.00
£40.00
£40.00
£40.00
£40.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
Length (mm)
0.86
0.87
0.88
0.89
0.9
0.91
0.92
0.93
0.94
0.95
0.96
0.97
0.98
0.99
0.991
0.992
0.993
0.994
0.995
0.996
0.997
0.998
0.999
1
1.0005
1.001
1.002
1.003
1.004
1.005
1.006
1.007
1.008
1.009
1.01
1.02
1.03
1.04
Code No.
611927-131
611928-131
611929-131
611930-131
611931-131
611932-131
611933-131
611934-131
611935-131
611936-131
611937-131
611938-131
611939-131
611940-131
611551-131
611552-131
611553-131
611554-131
611555-131
611556-131
611557-131
611558-131
611559-131
611611-131
611520-131
611521-131
611522-131
611523-131
611524-131
611525-131
611526-131
611527-131
611528-131
611529-131
611561-131
611562-131
611563-131
611564-131
Price
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£35.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£22.00
£22.00
£22.00
£22.00
£22.00
£22.00
£22.00
£22.00
£22.00
£22.00
£22.00
£20.30
£20.30
£20.30
£20.30
DIMENSIONS
Unit: mm
Nominal length:
0.1 mm – 5.5 mm
9 -0.05
-0.2
Length
Nominal
Value
0
30 -0.3
Measuring
face
92123
Serial
number
Nominal length:
6 mm – 10 mm
9 -0.05
-0.2
Length
mm
0
30 -0.3
Nominal
Value
92123
Serial
number
Measuring
face
Nominal length:
10.3 mm – 100 mm
9 -0.05
-0.2
0
35 -0.3
Length
mm
Nominal
Value
92123
Serial
number
Measuring
face
Nominal length 125 mm – 1000 mm
Length (L)
9 -0.05
-0.2
Nominal
Value
2-Ø10
Lx0.211
0
35 -0.3
Lx0.211
Measuring
face
Airy line
25±0.5
Serial
number
25±0.5
Length (mm)
1.05
1.06
1.07
1.08
1.09
1.1
1.11
1.12
1.13
1.14
1.15
1.16
1.17
1.18
1.19
1.2
1.21
1.22
1.23
1.24
1.25
1.26
1.27
1.28
1.29
1.3
1.31
1.32
1.33
1.34
1.35
1.36
1.37
1.38
1.39
1.4
1.41
1.42
1.43
1.44
1.45
1.46
1.47
1.48
1.49
1.5
1.6
1.7
1.8
1.9
2
2.0005
2.001
2.002
2.003
2.004
2.005
2.006
2.007
2.008
Code No.
611565-131
611566-131
611567-131
611568-131
611569-131
611570-131
611571-131
611572-131
611573-131
611574-131
611575-131
611576-131
611577-131
611578-131
611579-131
611580-131
611581-131
611582-131
611583-131
611584-131
611585-131
611586-131
611587-131
611588-131
611589-131
611590-131
611591-131
611592-131
611593-131
611594-131
611595-131
611596-131
611597-131
611598-131
611599-131
611600-131
611601-131
611602-131
611603-131
611604-131
611605-131
611606-131
611607-131
611608-131
611609-131
611641-131
611516-131
611517-131
611518-131
611519-131
611612-131
611690-131
611691-131
611692-131
611693-131
611694-131
611695-131
611696-131
611697-131
611698-131
Price
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£20.30
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
Length (mm)
2.009
2.01
2.02
2.03
2.04
2.05
2.06
2.07
2.08
2.09
2.1
2.11
2.12
2.13
2.14
2.15
2.16
2.17
2.18
2.19
2.2
2.21
2.22
2.23
2.24
2.25
2.26
2.27
2.28
2.29
2.3
2.31
2.32
2.33
2.34
2.35
2.36
2.37
2.38
2.39
2.4
2.41
2.42
2.43
2.44
2.45
2.46
2.47
2.48
2.49
2.5
2.6
2.7
2.8
2.9
3
3.5
4
4.5
5
Code No.
611699-131
611701-131
611702-131
611703-131
611704-131
611705-131
611706-131
611707-131
611708-131
611709-131
611710-131
611711-131
611712-131
611713-131
611714-131
611715-131
611716-131
611717-131
611718-131
611719-131
611720-131
611721-131
611722-131
611723-131
611724-131
611725-131
611726-131
611727-131
611728-131
611729-131
611730-131
611731-131
611732-131
611733-131
611734-131
611735-131
611736-131
611737-131
611738-131
611739-131
611740-131
611741-131
611742-131
611743-131
611744-131
611745-131
611746-131
611747-131
611748-131
611749-131
611642-131
611750-131
611751-131
611752-131
611753-131
611613-131
611643-131
611614-131
611644-131
611615-131
E-10
Price
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£18.60
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£21.30
£17.80
£17.80
£17.80
£17.80
£21.30
£18.00
£18.00
£18.00
£18.10
Length (mm)
5.1
5.5
6
6.5
7
7.5
7.7
8
8.5
9
9.5
10
10.3
10.5
11
11.5
12
12.5
12.9
13
13.5
14
14.5
15
15.5
16
16.5
17
17.5
17.6
18
18.5
19
19.5
20
20.2
20.5
21
21.5
22
22.5
22.8
23
23.5
24
24.5
25
25.25
30
35
40
41.3
45
50
60
70
75
80
90
100
Code No.
611850-131
611645-131
611616-131
611646-131
611617-131
611647-131
611851-131
611618-131
611648-131
611619-131
611649-131
611671-131
611852-131
611650-131
611621-131
611651-131
611622-131
611652-131
611853-131
611623-131
611653-131
611624-131
611654-131
611625-131
611655-131
611626-131
611656-131
611627-131
611657-131
611854-131
611628-131
611658-131
611629-131
611659-131
611672-131
611855-131
611660-131
611631-131
611661-131
611632-131
611662-131
611856-131
611633-131
611663-131
611634-131
611664-131
611635-131
611754-131
611673-131
611755-131
611674-131
611857-131
611756-131
611675-131
611676-131
611677-131
611801-131
611678-131
611679-131
611681-131
Price
£65.60
£22.00
£22.80
£22.80
£22.80
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.30
£23.30
£27.70
£28.40
£28.40
£28.40
£60.00
£28.40
£28.40
£28.60
£28.60
£28.60
£28.80
£30.10
£30.10
£30.10
£30.40
£65.00
£30.40
£30.40
£31.10
£31.10
£31.10
£65.00
£31.30
£32.40
£32.40
£32.40
£32.40
£65.00
£32.90
£32.90
£32.90
£32.90
£32.90
£32.90
£35.70
£35.70
£38.80
£38.80
£38.80
£44.10
£51.30
£55.00
£60.70
£61.70
£63.50
£68.50
E
Gauge Blocks
Individual Inch Steel Gauge Blocks
DIMENSIONS
Unit: mm
611201-131
E
SPECIFICATIONS
Inch
Length (inch)
.05
.0625 (1/16)
.1
.10005
.1001
.1002
.1003
.1004
.1005
.1006
.1007
.1008
.1009
.101
.102
.103
.104
.105
.106
.107
.108
.109
.11
.111
.112
.113
.114
.115
.116
.117
.118
.119
Code No.
611105-131
611303-131
611191-131
611135-131
611121-131
611122-131
611123-131
611124-131
611125-131
611126-131
611127-131
611128-131
611129-131
611141-131
611142-131
611143-131
611144-131
611145-131
611146-131
611147-131
611148-131
611149-131
611150-131
611151-131
611152-131
611153-131
611154-131
611155-131
611156-131
611157-131
611158-131
611159-131
Price
£21.90
£21.50
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
Length (inch)
.12
.121
.122
.123
.124
.125
.126
.127
.128
.129
.13
.131
.132
.133
.134
.135
.136
.137
.138
.139
.14
.141
.142
.143
.144
.145
.146
.147
.148
.149
.15
.16
Code No.
611160-131
611161-131
611162-131
611163-131
611164-131
611165-131
611166-131
611167-131
611168-131
611169-131
611170-131
611171-131
611172-131
611173-131
611174-131
611175-131
611176-131
611177-131
611178-131
611179-131
611180-131
611181-131
611182-131
611183-131
611184-131
611185-131
611186-131
611187-131
611188-131
611189-131
611115-131
611116-131
E-11
Price
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£22.80
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
£23.00
Length (inch)
.17
.18
.19
.2
.21
.25
.3
.315
.35
.375 (3/8)
.4
.420
.45
.5
.55
.6
.605
.65
.7
.710
.75
.8
.815
.85
.9
.920
.95
1
2
3
4
Code No.
611117-131
611118-131
611119-131
611192-131
611221-131
611212-131
611193-131
611209-131
611213-131
611113-131
611194-131
611210-131
611214-131
611195-131
611215-131
611196-131
611211-131
611216-131
611197-131
611220-131
611217-131
611198-131
611226-131
611218-131
611199-131
611227-131
611219-131
611201-131
611202-131
611203-131
611204-131
Price
£23.00
£23.00
£23.00
£23.30
£24.80
£28.60
£29.00
£29.60
£29.60
£29.60
£29.60
£29.60
£35.90
£36.20
£36.60
£37.10
£37.10
£38.30
£38.80
£38.80
£39.10
£39.40
£39.40
£40.50
£42.20
£42.20
£42.20
£42.40
£59.30
£76.80
£91.40
SERIES 516 – Wear Block Sets
•For protecting the measuring surfaces of gauge blocks from excessive wear.
E
516-806-10
516-834-12
SPECIFICATIONS
Metric
Blocks per set
Carbide
2
Code No.
Grade
516-807-10
516-806-10
516-803-10
516-802-10
0
1
0
1
516-832-10
516-833-10
516-830-10
516-831-10
0
1
0
1
2 pcs.
Code No.
Grade
Contents
516-809-12
516-808-12
516-805-12
516-804-12
0
1
0
1
516-836-12
516-837-12
516-834-12
516-835-12
0
1
0
1
Contents
Nominal size
1 mm
2 pcs.
2 mm
Price
£154.00
£143.00
£154.00
£143.00
CERA
2
1 mm
2 mm
£90.00
£90.00
£90.00
£90.00
Inch
Blocks per set
Carbide
2
Nominal size
.05"
2 pcs.
.1"
Price
£154.00
£143.00
£154.00
£143.00
CERA
2
.05"
2 pcs.
.1"
E-12
£90.00
£90.00
£90.00
£90.00
Gauge Blocks
SERIES 516 – Gauge Block Accessory Sets
•To expand the range of gauge block applications, Mitutoyo offers gauge block accessories sets. By
assembling the items in a set, together with gauge blocks, you can easily and quickly build up a custom
precision gauge to suit your application.
516-601
(22 pcs)
E
516-602
(14 pcs)
SPECIFICATIONS
Item description
Holder
Base
Half round jaw
Plain jaw
Scriber point
Centre point
Tram point
Triangular straight edge
Item
Code No.
619002
619003
619004
619005
619009
619010
619011
619012
619013
619014
619018
619019
619020
619021
619022
619023
Set
22 pcs
516-601
14 pcs
516-602
—
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
—
—
—
4
4
—
4
—
Qty
1 pc.
One pair (2 pcs)
1 pc.
One pair (2 pcs)
1 pc.
Item
Price
£175.00
£183.00
£203.00
£213.00
£271.00
£192.00
£191.00
£225.00
£271.00
£346.00
£207.00
£71.60
£89.50
£313.00
£181.00
£288.00
* Only 1 pc is supplied for each Code No. However, half round jaws, plain jaws, and tram points are supplied in pairs.
Code No.
516-601
516-602
Description
22 pc set
14 pc set
Price
£2260.00
£1390.00
E-13
L
Application Examples
Holder
Finished surfaces
Thickness = 15 mm, width = 29.5 mm
Clamp
L
L
Finished surfaces
Finished surfaces Adapter
Clamp
619002 L = 15
- 60 mm
619003 L = 5 - 100 mmL
Gauging a bore using a pair of half round jaws and a holder.
Finished surfaces
Base
Finished surfaces
619004 L = 15 - 160 mm
619005 L = 20 - 250 mm
Used to clamp a stack of gauge blocks and jaws (or scriber point, etc.)
together to form a gauge
Adapter
Finished surfaces
619009
35±0.0008
Finished surface
Flatness tolerance of the finished surface: 0.5 μm
Flatness tolerance of the bottom surface: 1 μm
Holder mount
Half Round Jaw
Marking a workpiece using the base, a holder and the scriber
point.
C
C
B
9
E
Type ll
Type l
9
B
Measuring face
Measuring face
A
D
A
D
Finished surface
Finished surface
Code No.
619010
619011
619012
619013
619014
Type
Unit: mm
Size
2
5
8
12
20
I
II
A
2±0.0005
5±0.0005
8±0.0005
12±0.0005
20±0.0005
B
5.5
14
20
25
25
Plain Jaw (B type)
Scriber Point
619018
619019
50
8.5
20
25°
Setting a bore gauge using a holder
with the pair of Type I half-round jaws
arranged as flat contact surfaces.
C
40
45
50
75
125
9
160
Measuring and finished surface
9
Finished surface
Flatness tolerance of the finished surface: 1 μm
Centre Point
Tram Point
619020
619021
Finished surface 30°
60°
8.5
8.5
Finished surface
9
9
50
Eccentricity tolerance of the point: ±10 μm
Eccentricity tolerance of the point: ±10 μm
16
19.
5
Triangular Straight Edge
60°
16
(619022)
19.5
(619023)
L
100 mm (619022)
160 mm (619023)
Straightness tolerance of the edge: 1.2 μm
50
E-14
D
7.5
7.5
8.5
13
20
Gauge Blocks
SERIES 516 – Maintenance Kit for Gauge Blocks
•Maintenance kit for gauge blocks includes all the necessary maintenance tools for removing burrs and
contamination before use, and applying anti-corrosion treatment after use, etc.
Recommendation for Regular
Calibration
Gauge blocks are often used to define a company’s standard
of length for manufacturing and as such must be reliable. This
means that they need regular calibration to verify accuracy.
(The problem of damage or corrosion should be addressed
during use and blocks seriously affected must be discarded
immediately.) The frequency of calibration depends on the
tolerance requirements of the work, the amount of use and
conditions under which the gauge blocks are used. The most
economical cycle for any particular set of gauge blocks is best
determined by studying the calibration history. The list below
indicates timings for a typical initial calibration cycle for the
various grades of block.
E
Application
Reference
Standard
Inspection
Shop floor
516-650E
SPECIFICATIONS
Code No.
516-650E
Tools and accessories included
Ceraston (601645): For removing burrs on the measuring surfaces (100 x 25 x 12 mm).
Optical flat (158-117): For checking whether burrs exist on the measuring surfaces
(ø45 x 12 mm).
Tweezers (600004): For handling thin blocks.
Blower brush (600005): For blowing dust off the measuring surfaces.
Cleaning paper (600006): For wiping off rust preventive oil and contamination (500 pcs.).
Artificial leather mat (600007): For handling blocks on a benchtop to prevent contamination
and damage
Reagent bottle (600008): Bottle of cleansing solution (100 ml).
Gloves (600009): For handling large blocks to prevent expansion due to heat transfer from
operator.
E-15
Price
Cycle
1-2
2
2
0.5 - 1
Grade (reference)
K
K or 0
0 or 1
1 or 2
As an accredited calibration laboratory, Mitutoyo offers a
traceable calibration service for customers’ gauge blocks. Our
regular calibration service features:
•Gauge blocks manufactured by any maker can be calibrated.
•Cleansing and removal of burrs.
•Central dimension and dimensional deviations of each block
are measured.
•Calibration results are provided for immediate use and for
building a calibration history of each block.
£462.00
Ceraston – Accessory for Gauge Block Maintenance
Removing Burrs
•Alumina-ceramic abrasive stone for removing
burrs from hard materials such as ceramics that
ordinary stones cannot handle.
•Can be used both for steel gauge blocks and
CERA blocks.
Figure 1
•Excellent in the ease with which burrs can
be removed and for durability compared with
Arkansas stones.
•Both sides can be used.
CERASTON (Or Arkansas stone)
Figure 2
Rubber
CERASTON (Or Arkansas stone)
(1)Wipe any dust and oil films from the gauge block and the Ceraston (or Arkansas stone) using a solvent.
(2)Place the gauge block on the Ceraston so that the
measuring face that has burrs is on the abrasive surface of
the stone. While applying light pressure, move the gauge
block to and fro about ten times (Fig. 1). Use a block
rubber for thin gauge blocks to apply even pressure (Fig. 2).
(3)Check the measuring face for burrs with an optical flat. If
the burrs have not been removed, repeat step (2). If burrs
are too large, they may not be removed with an abrasive
stone. If so, discard the gauge block.
Note: The abrasive surface of a Ceraston must be made flat by lapping
it from time to time. After lapping the Ceraston, the lapping powder
must be completely removed from the surface to prevent the surface
of the gauge block from being scratched.
E
601644
601645
SPECIFICATIONS
Code No.
601644
601645
Dimensions
150 (W) x 50 (D) x 20 (H) mm
100 (W) x 25 (D) x 12 (H) mm
Mitutoyo does not offer Arkansas stones.
Application example.
E-16
Price
£285.00
£121.00
Quick Guide to Precision
Measuring Instruments
Gauge Blocks
■ Definition of the Metre
The 17th General Conference of Weights and Measures in 1983
decided on a new definition of the metre unit as the length of the
path traveled by light in a vacuum during a time interval of 1/299 792
458 of a second. The gauge block is the practical realization of this
unit and as such is used widely throughout industry.
■ Selection, Preparation and Assembly of a
Gauge Block Stack
(5)Gently overlay the faces of the gauge blocks to be wrung together.
There are three methods to use (a, b and c as shown below)
according to the size of blocks being wrung:
a.Wringing thick
gauge blocks
23
mm
Rotate the gauge blocks
while applying slight force to
them. You will get a sense of
wringing by sliding the blocks.
23
mm
1237690
c.Wringing thin gauge
blocks
Overlap one side of a thin
gauge block on one side of a
thick gauge block.
To prevent thin gauge blocks
from bending, first wring a
thin gauge block onto a thick
gauge block.
237015
14
a.Wipe each measuring face clean.
b.Gently place the optical flat on the gauge block measuring face.
c. Lightly slide the optical flat until interference fringes appear.
Judgement 1: If no interference fringes appear, it is assumed that there is a large burr or contaminant on the measuring face.
d.Lightly press the optical flat to check that the interference fringes disappear.
Judgement 2: If the interference fringes disappear, no burr exists on the measuring face.
Judgement 3: If some interference fringes remain locally while the flat is gently moved to and fro, a burr exists on the measuring face. If the fringes move along with the optical flat, there is a burr on the optical flat.
e.Remove burrs, if any, from the measuring face using a flat, fine-
grained abrasive stone.
(4)Apply a very small amount of oil to the measuring face and spread
it evenly across the face. (Wipe the face until the oil film is almost
removed.) Grease, spindle oil, vaseline, etc., are commonly used.
b.Wringing a thick gauge
block to a thin gauge block
23701534
Cross the gauge blocks at 90º
in the middle of the measuring
faces.
mm
Slide the thin gauge block
while pressing the entire
overlapped area to align the
measuring faces with each
other.
Then, wring the other thin
gauge block onto the first thin
gauge block.
14
mm
12376
Align the measuring faces with
each other.
Finally, remove the thick
gauge block from the stack.
Apply an optical flat to the surface
of one thin gauge block to check
the wringing state.
Irregular
interference fringes
1
2
3
7
6
9
0
2
m 3
m
E
Select gauge blocks to be combined to make up the size required for
the stack.
(1)Take the following things into account when selecting gauge blocks.
a.Use the minimum number of blocks whenever possible.
b.Select thick gauge blocks whenever possible.
c. Select the size from the one that has the least significant digit required, and then work back through the more significant digits.
(2)Clean the gauge blocks with an appropriate cleaning agent.
(3)Check the measuring faces for burrs by using an optical flat as
follows:
Wipe the exposed measuring face(s) and continue building up the
stack, in the same manner as above, until complete.
E-17
■ Thermal Stabilization Time
Elongation (µm)
The following figure shows the degree of dimensional change when
handling a 100 mm steel gauge block with bare hands.
Time fingers are released
9
8
7
6
5
4
3
2
1
The gauge block is held with five fingers.
The gauge block is held with three fingers.
5 10
20
30
40
50
60
70
Lapse of time (minutes)
E
E-18
Reference Gauges
SERIES 515 – Height Master
•For calibrating and setting height gauges.
•A double gauge block height micrometer with integrated counter that makes reading faster, easier and
error-free.
•The gauge blocks in the Height Master are arranged in two parallel rows, with a block step of 20 mm
or 1" depending on model.
•The digital models are equipped with a data output port that enables incorporation into measurement
networking and statistical process control systems.
Technical Data (Digital models only)
Display: Battery: Battery life: LCD
SR44 (2 pcs.), 938882
Approx. 1.8 years under normal use
Functions (Digital models only)
Zero setting, Presetting, ABS/INC switching, Data hold, Data
output, Auto power off, inch/mm reading (inch/mm models)
Alarm: Low voltage, Counting value composition error
Optional Accessories (Digital models only)
959149:
959150:
SPC data cable (1 m)
£34.60
SPC data cable (2 m)
£39.40
Reading
(3)
(2)
Staggered 20 mm or 1"
blocks (movable)
E
(A)
(A)
Vertical orientation
(A) Height A
(1) Scale (2) Counter (3) Thimble Riser block
515-322
(1)
280.
5.67
0.000
285.670 mm
515-374
SPECIFICATIONS
Metric
Measuring
Micrometer Micrometer Block pitch Parallelism
Retrace Mass
Graduation
Feed error
range
adjustment
feed
accuracy of blocks
error (kg)
Height Master
515-322
5-310 mm 0.001 mm 20 mm 0.5 mm/rev ±1.5 μm
1 μm
±1 μm
1 μm
23
Digital Height Master
515-374
10-310 mm 0.001 mm 20 mm 0.5 mm/rev ±1.5 μm
2 μm
±2 μm
2 μm 9.5
Code No.
Price
£2180.00
£1895.00
Inch
Code No.
Range
(H)
Height Master
515-311
.2-12.2"
Digital Height Master
515-375
.5-12"
Graduation
Micrometer Micrometer Block pitch Parallelism
Retrace Mass
Feed error
error (kg)
adjustment
feed
accuracy of blocks
Price
.00001"
1"
.025"/rev
±50 µin
40 µin
±40 µin
23
£2180.00
.00001"
1"
.025"/rev ±100 µin
50 µin
±100 µin 100 µin 9.5
£1895.00
40 µin
Note: The block accuracy and the parallelism of blocks are relative to the main unit reference surfaces.
E-19
SERIES 515 – Height Master Auxiliary Block Kit for Bore Gauge Setting
•Used for efficient reference-setting of dial bore gauges and tubular inside micrometers (18-150 mm) on
a Height Master.
515-112
SPECIFICATIONS
Metric
Code No.
515-111
515-112
Inch
Price
£195.00
£195.00
Suitable type
Digital Height Master (515-374)
Height Master (515-322)
Code No.
515-120
515-121
Suitable type
Digital Height Master (515-375)
Height Master (515-311)
Price
£195.00
£195.00
SERIES 515 – Height Master Riser Blocks
•The measuring range of a Height Master can be extended up to 900 mm by using 150, 300 or 600 mm
riser blocks.
515-113
515-114
515-115
SPECIFICATIONS
Metric
Code No.
515-113
515-114
515-115
Height
150 mm
300 mm
600 mm
Accuracy
±0.6 µm
±1 µm
±2 µm
Variation in length
0.6 μm
0.8 μm
1 μm
Mass
5.7 kg
11.8 kg
26.8 kg
Price
£321.00
£470.00
£709.00
Height
6"
12"
24"
Accuracy
±20 µin
±40 µin
±80 µin
Variation in length
20 µin
30 µin
40 µin
Mass
5.7 kg
11.8 kg
27.9 kg
Price
£321.00
£470.00
£709.00
Inch
Code No.
515-116
515-117
515-118
E-20
E
Reference Gauges
SERIES 515 – Check Master
•This calibration fixture is designed for calibrating the X-, Y- and Z-coordinate axes of precision machine
tools and coordinate measuring machines.
•Rigidly clamped 10 mm gauge blocks provide a step of 20 mm.
515-722
E
Single-row
10 mm (.5") blocks
Vertical
orientation
Horizontal
orientation
515-722
515-723
515-724
SPECIFICATIONS
Metric
Code No.
Range (H)
Block pitch
accuracy
Parallelism of
blocks
Mass
Price
515-720
300 mm
H ≤ 310 mm
310 < H ≤ 610 mm
610< H ≤ 1010 mm
H ≤ 310 mm
310< H ≤ 610 mm
610< H ≤ 1010 mm
515-721
450 mm
515-722
600 mm
515-723
1000 mm
±2.5 μm
—
±3.5 μm
—
±5 μm
12 μm
—
15 μm
7 kg
£2460.00
—
10 kg
£2840.00
13 kg
£3210.00
2 μm
22 kg
£5280.00
Notes: 1) The block accuracy and the parallelism of blocks are relative to the main unit reference surface.
2) Supplied with a wooden storage case as standard.
E-21
SERIES 515 – High Accuracy Check Master
•This calibration fixture is designed for calibrating the X-, Y- and Z-coordinate axes of precision machine
tools and coordinate measuring machines.
•Rigidly clamped 10 mm (or .5") gauge blocks provide a step of 20 mm (or 1").
Using in horizontal orientation.
Optional Accessory
601167:
Supporting base for vertical operation
£425.00
E
515-742
515-743
Supporting base
Single-row
10 mm (.5") blocks
Vertical
orientation
Horizontal
orientation
SPECIFICATIONS
Metric
Code No.
Range (R)
Block pitch
accuracy
Parallelism of
blocks
515-741
450 mm
H ≤ 310 mm
310 < H ≤ 610 mm
610< H ≤ 1010 mm
H ≤ 450 mm
450< H ≤ 1010 mm
Mass
Price
515-742
600 mm
±1.2 μm
±1.8 μm
515-743
1000 mm
—
±2.5 μm
1 μm
—
5.4 kg
£2940.00
1.5 μm
7.2 kg
£3340.00
12 kg
£5460.00
515-732
24"
±50 μin
±70 μin
515-733
40"
Inch
Code No.
Range (R)
Block pitch
accuracy
Parallelism of
blocks
515-731
18"
H ≤ 12"
12" < H ≤ 24"
24" < H ≤ 40"
H ≤ 18"
18" < H ≤ 40"
Mass
Price
—
±100 μin
40 μin
—
5.4 kg
£2940.00
60 μin
7.2 kg
£3340.00
Notes: 1) The block accuracy and the parallelism of blocks are relative to the main unit reference surface.
2) Supplied with a wooden storage case as standard.
E-22
12 kg
£5460.00
Reference Gauges
SERIES 916 – Precision Square
•Designed for layout and measurement work.
•Hardened, ground and lapped steel measuring edge.
•Squares are right-angled both inside and out.
E
916-402
SPECIFICATIONS
Code No.
Size (W x D x T)
916-401
916-402
916-403
916-404
916-405
916-406
916-407
75 x 50 x 4 mm
100 x 70 x 4 mm
150 x 100 x 4 mm
200 x 130 x 4 mm
250 x 165 x 5.5 mm
300 x 200 x 5.5 mm
400 x 250 x 8 mm
Squareness
Outside
6.5 µm
7 µm
8 µm
9 µm
10 µm
11 µm
13 µm
E-23
Inside
14 µm
15 µm
17.5 µm
20 µm
22.5 µm
25 µm
30 µm
Price
£75.10
£120.00
£119.00
£138.00
£160.00
£203.00
£350.00
SERIES 180 – Combination Square Set
Technical Data
Square head: Centre head: Protractor head: Used to set the rule at 90º or 45º to
an edge of a workpiece.
Used to locate centres of round
workpieces.
Used to set the rule at a desired angle
to an edge of a workpiece. Also used
for measuring angles.
•Three heads are attachable to the stainless steel rule (blade), allowing versatile measurements on
various types of workpieces.
Optional Accessory
180-603U:
600 mm / 24" blade with 4 scales graduated
1 mm, 0.5 mm, 1/32" and 1/64"
£75.00
E
180-907U
SPECIFICATIONS
Code No.
Full set
180-907U
Individual set items
Code No.
180-503U
180-102U
180-202U
180-301U
Size
Graduation
12" / 300 mm
1/32", 1/64",1 mm, 0.5 mm
Description
Blade (12" / 300 mm)
Square head
Centre head
Protractor
E-24
Price
£185.00
Price
£39.00
£46.00
£44.00
£75.00
Reference Gauges
SERIES 182 – Steel Rules
•Clear graduations on satin-chrome finish.
•Stainless tempered.
182-131
182-121
182-125
E
182-225
SPECIFICATIONS
Metric
Code No.
Wide rigid rules
182-111
182-131
Fully flexible rules
182-211
182-231
Graduations
Range
Width
Price
1 mm, 0.5 mm
(on both faces)
150 mm
300 mm
19 mm
25 mm
£6.80
£13.00
1 mm, 0.5 mm
(on both faces)
150 mm
300 mm
12 mm
12 mm
£11.50
£11.80
Graduations
Range
Width
Price
1/8", 1/16", 1/32", 1/64"
6"
12"
.75"
.98"
£6.80
£13.00
1/8", 1/16", 1/32", 1/64"
6"
12"
.47"
.47"
£6.80
£11.80
Graduations
Range
Width
Price
1/32", 1/64", 1 mm, 0.5 mm
6" / 150 mm
12" / 300 mm
18" / 450 mm
24" / 600 mm
.75"
.98"
1.18"
1.18"
£9.00
£19.00
£32.10
£45.70
1/16", 1/32", 1/64",
1 mm, 0.5 mm
40" / 1000 mm
.59"
£45.00
1/32", 1/64", 1 mm, 0.5 mm
6" / 150 mm
12" / 300 mm
18" / 450 mm
24" / 600 mm
.47"
.47"
.75"
.75"
£6.80
£11.80
£30.20
£38.40
Inch
Code No.
Wide rigid rules
182-101
182-121
182-201
182-221
Inch/Metric
Code No.
Wide rigid rules
182-105
182-125
182-145
182-165
Semi-flexible rules
182-309*
182-205
182-225
182-245
182-265
* Graduations engraved on the front side only.
E-25
SERIES 184 – Thickness Gauges
•Metric thickness gauges are available with
tapered leaves.
•Each leaf is marked with its thickness.
•Each leaf is detachable if necessary.
E
184-304S
SPECIFICATIONS
Metric
Code No.
184-304S
184-308S
Range
Composition of leaves
0.05 - 1 mm
20 leaves: 0.05 - 1 mm by 0.05 mm
0.05 - 0.8 mm 10 leaves: 0.05 - 0.2 mm by 0.05 mm, 0.3 - 0.8 mm by 0.1 mm
E-26
Remarks
Long leaf
Long leaf
Price
£23.50
£12.50
Reference Gauges
SERIES 186 – Radius Gauges
•Each leaf comprises an internal and an external
radius gauge of the same size.
•Radius size is stamped on each leaf.
•With locking clamp.
186-105
E
186-110
SPECIFICATIONS
Metric
Code No.
186-110
186-902
186-105
186-106
186-107
18 leaves: 0.4, 0.8, 1, 1.2, 1.5, 1.6 mm, 1.75 - 3 mm by
0.4 - 6 mm
0.25 mm, 3.5 - 6 mm by 0.5 mm
0.5 - 13 mm 26 leaves: 0.5 - 13 mm by 0.5 mm
1 - 7 mm
34 leaves: 1 - 3 mm by 0.25 mm 3.5 - 7 mm by 0.5 mm
7.5 - 15 mm 32 leaves: 7.5 - 15 mm by 0.5 mm
15.5 - 25 mm 30 leaves: 15.5 - 20 mm by 0.5 mm, 21 - 25 mm by 1 mm
Remarks
Price
90° arc
£31.60
90° arc
180° arc
180° arc
180° arc
£140.00
£28.00
£25.00
£53.70
Range
1/32" - 17/64"
1/32" - 1/4"
17/64" - 1/2"
9/32" - 33/64"
1/64" - 1/2"
Remarks
90° arc
180° arc
180° arc
90° arc
—
Price
£28.50
£28.40
£32.60
£31.50
£135.00
Range
Inch
Code No.
186-103
186-101
186-102
186-104
186-901*
16 leaves: 1/32" - 17/64" by 64ths
15 leaves: 1/32" - 1/4" by 64ths
16 leaves: 17/64" - 1/2" by 64ths
16 leaves: 9/32" - 33/64" by 64ths
25 leaves: 1/64" - 17/64" by 64ths, 9/32" - 1/2" by 32nds
* Each gauge has five measuring locations.
E-27
SERIES 188 – Thread Pitch Gauges
•Thread pitch is stamped on each gauge.
•Metric, Unified, and Whitworth screw pitch gauges.
188-101
E
SPECIFICATIONS
Code No.
Range
Metric screw pitch gauges
188-130
0.35 - 6 mm
188-122
0.4 - 7 mm
188-121
0.4 - 7 mm
Price
22 leaves:0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6 mm and 60° angle gauge
21 leaves:0.4, 0.5, 0.7, 0.75, 0.8, 0.9, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7 mm
18 leaves:0.4, 0.5, 0.75, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5,
7 mm
£29.60
£29.60
£29.60
Unified screw pitch gauges
30 leaves:4, 41/2, 5, 51/2, 6, 7, 8, 9, 10, 11, 111/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42 TPI
Metric and Unified screw pitch gauge set
0.4 - 7 mm/
188-151
51 leaves:consisting of sets 188-122 and 188-111
4 - 42 TPI
Whitworth screw pitch gauges
30 leaves:4, 41/2, 5, 51/2 , 6, 7, 8, 9, 10, 11, 111/2, 12, 13, 14, 15, 16, 18, 20, 22, 188-101
4 - 42 TPI
24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42 TPI
28 leaves:4, 41/2, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 19, 20, 22, 24, 25, 26, 188-102
4 - 60 TPI
28, 30, 32, 34, 36, 40, 48, 60 TPI
188-111
4 - 42 TPI
E-28
£32.70
£55.60
£30.70
£29.60
Reference Gauges
SERIES 187 – Digital Universal Protractor
•Universal Bevel Protractor with easy-to-read
digital display.
•Automatic turn-off after 10 minutes; fixed
reference points for easy adjustment.
•Fine adjustment for precise setting of angles.
•The protractor head slides and clamps at any
point along the blade.
•Will mount on Series 192 height gauges via
holder.
Technical Data
Battery:
Battery life: Lithium Battery
2,000 hours
Functions
Presetting
Accessory Included
950749:
Holder for mounting on height gauges
187-552
E
SPECIFICATIONS
Inch/Metric
Code No.
187-551
187-552
Blade length
150 mm / 6"
300 mm / 12"
Measuring range
Accuracy
Resolution
Repeatability
-360º to +360º
±2" (±0.03º)
1’ (0.01º)
1’ (0.01º)
Price
£592.00
£623.00
SERIES 187 – Universal Bevel Protractor
•High-precision instrument for accurate angle
measurement on machines, moulds, and jigs.
Accessory Included
•Can be attached to height gauges.
950750:
Holder for mounting on height gauges
187-908
SPECIFICATIONS
Inch/Metric
Code No.
187-907
187-908
Blade length
150 mm / 6"
300 mm / 12"
Graduation
Circle division
Remarks
5' (0° - 90° - 0°)
90° x 4 (360°)
w/60°, 45° edges
E-29
Price
£172.00
£181.00
SERIES 950 – Spring Dividers and Calipers
•Spring Divider — Fully hardened and tempered joints, spring, washers and divider points.
•Outside Spring Caliper — Contact ends fully rounded to give good contact with a workpiece.
•Inside Spring Caliper — Ends fully rounded to give good contact with a workpiece.
950-212
950-222
950-232
E
SPECIFICATIONS
Code No.
Range
Spring Divider
950-212
150 mm / 6"
950-213
200 mm / 8"
Outside Spring Caliper
950-222
150 mm / 6"
950-223
200 mm / 8"
Price
£13.80
£15.30
Code No.
Range
Inside Spring Caliper
950-232
150 mm / 6"
950-233
200 mm / 8"
Price
£13.80
£15.30
£13.80
£15.30
SERIES 960 – Precision Levels
•Intended for setting precision machine tools and
instruments to be truly level.
•Flat measuring faces, precision ground with vee ground base.
•Longitudinal and transverse bubble level.
•Adjustable for zero level.
•Can test surfaces for verticality as well as for
horizontal level (960-703).
960-703
960-603
SPECIFICATIONS
Code No.
960-601
960-602
960-603
960-703
Sensitivity
0.1 mm/m
0.05 mm/m
0.02 mm/m
Accuracy of graduations
0.05 mm/m
0.025 mm/m
0.01 mm/m
±0.3 DIV
E-30
Dimensions (W x D x H)
200 x 44 x 38.2 mm
200 x 44 x 200 mm
Price
£246.00
£278.00
£300.00
£493.00
Reference Gauges
SERIES 967 – Bench Centres
•Used with a dial test indicator (optional), these Bench Centres provide precision measurement of
concentricity on cylindrical workpieces.
•With an indicator clamp (holding stem diameter: 8 mm).
E
967-201-10
SPECIFICATIONS
Code No.
967-201-10
Maximum workpiece length
300 mm
Maximum workpiece diameter
150 mm
Mass
13 kg
Price
£973.00
DIMENSIONS
144
Unit: mm
500
400
55
75
300
E-31
SERIES 517 – Black Granite Surface Plates
Technical Data
Grade: Conforms to BS 817 1988
Optional Accessory
CM0700:
Granite cleaner (1 l)
£18.50
•Natural granite is free from deterioration or
dimensional change over time.
•Granite surface plates have significant advantages
over cast iron surface plates: twice as hard as cast
iron; non-magnetic; low thermal expansion.
•Free from burrs or protrusions because of the
fine grain structure and insignificant stickiness;
this ensures a high degree of flatness over a long
service life and causes no damage to workpieces
or instruments.
•Free from wringing, so there is no interruption of
work.
•Use these plates in a stable temperature
environment. Since flatness error occurs when
there is a temperature difference between the
working surface and the underside, avoid
working in direct sunlight. Also, do not place
a plate in the vicinity of an air conditioner, etc.
(Recommended environment: temperature
20±1°C, humidity 58±2%)
E
Granite surface plate
and stand
SPECIFICATIONS
Grade 1
Code No.
Without stand
517-901-1
517-902-1
517-903-1
517-904-1
517-905-1
517-906-1
517-907-1
517-908-1
With stand
517-909-1
517-910-1
517-911-1
517-912-1
517-913-1
517-914-1
517-915-1
517-916-1
517-917-1
517-918-1
Grade 0
Dimensions (L x W x H)
Price
300 x 200 x 65 mm
300 x 300 x 65 mm
450 x 300 x 75 mm
450 x 450 x 75 mm
600 x 450 x 75 mm
600 x 600 x 75 mm
750 x 600 x 100 mm
900 x 600 x 100 mm
£151.00
£208.00
£251.00
£355.00
£469.00
£578.00
£704.00
£876.00
900 x 600 x 100 mm
900 x 900 x 125 mm
1200 x 600 x 100 mm
1200 x 900 x 125 mm
1200 x 1200 x 150 mm
1500 x 1000 x 150 mm
1500 x 1200 x 150 mm
2000 x 1000 x 150 mm
2000 x 1200 x 150 mm
2400 x 1200 x 200 mm
£1210.00
£1870.00
£1670.00
£2370.00
£3060.00
£2750.00
£3560.00
£3340.00
£4130.00
£6560.00
Code No.
Without stand
517-901-0
517-902-0
517-903-0
517-904-0
517-905-0
517-906-0
517-907-0
517-908-0
With stand
517-909-0
517-910-0
517-911-0
517-912-0
517-913-0
517-914-0
517-915-0
517-916-0
517-917-0
517-918-0
E-32
Dimensions (L x W x H)
Price
300 x 200 x 65 mm
300 x 300 x 65 mm
450 x 300 x 75 mm
450 x 450 x 75 mm
600 x 450 x 75 mm
600 x 600 x 75 mm
750 x 600 x 100 mm
900 x 600 x 100 mm
£195.00
£254.00
£341.00
£404.00
£548.00
£686.00
£810.00
£941.00
900 x 600 x 100 mm
900 x 900 x 125 mm
1200 x 600 x 100 mm
1200 x 900 x 125 mm
1200 x 1200 x 150 mm
1500 x 1000 x 150 mm
1500 x 1200 x 150 mm
2000 x 1000 x 150 mm
2000 x 1200 x 150 mm
2400 x 1200 x 200 mm
£1350.00
£2040.00
£1890.00
£2590.00
£3290.00
£2990.00
£3880.00
£3650.00
£4590.00
£7210.00

G A U G E B LO CK S REFEREN C E G A U GES

Transcription

Similar documents

AeroForce Dual Interceptor Gauge (05

How to use your Clarks Toddler Foot Measuring Gauge

Hantech`s Quality Policy Test Equipment

gauges - Star Struck, LLC

Sporting Clays Challenge

Body Jewelry Measuring PDF

All About Air Pressure - Chase`n Race`n Online

Quadco`s Forespro® delimbers are engineered with the highest

CarpetPro® ENC-5418B Electric Stapler System SureShotTM 5424