New Efficiency. Thyssen Destination Selection

New Efficiency.
Thyssen Destination Selection Control DSC
for Elevator Groups.
A Company
of ThyssenKrupp
Industries
Thyssen Aufzüge
Elevator 1
Elevator 2
TK
Destination
call
Up to 30% Increase in Handling Capacity.
Directional-sensitive Elevator Control.
2
1
Fig. 1
In front of elevator
groups
Customized solution of
operating terminal in
elevator lobby.
Fig. 2
Inside elevator car
Display of floor, as well
as push-buttons for door
functions and emergency
call. No push-buttons for
input of floor destination.
3
Fig. 3-4
At operating terminal
Input of floor destination.
Call of help function on
demand.
4
Thyssen destination selection
control DSC
provides elevator
installations with
new efficiency
dimensions by
100 % increase in
information.
New group dynamics.
Elevator control on new levels:
unlike conventional control
systems Thyssen destination
selection control DSC does not
only register the desired travel
direction when a call is entered,
but also the floor destination
desired by the passenger.
Benefit: the control has “twice
as much” information available
as usual. Based on these data
the control can select the
elevator of the group which can
best serve the respective call.
Efficiency and Performance.
Well-directed Transportation.
Destination
call
6
5
1
Elevator 1
2
Elevator 2
3
Effective transport control by advanced call management. Departure floor and landing destination
are registered synchronously.
s
Up to 30 % increase in handling capacity.
Resulting in considerable gain in time and productivity in office buildings.
s
User-friendly flat touch-screen terminals for call
input. Use of most advanced TFT-technology
ensures excellent viewing quality from every
viewing angle.
s
Graphic user guidance ensures easy operation and
high degree of acceptance.
s
Stand-alone column, flush wall mounted system or
touch-key box on the wall with various front panel
options. Integration into architectural requirements
are possible.
s
Assignment of lift immediately after call input.
No additional car commands required.
Elevator 3
3
5
4
s
6
3
2
6
5
1
6
5
Flexibility and Comfort.
Higher Capacities, More Benefits.
Destination selection control DSC
High-performance passenger transport of a group of
3 elevators.
The number of intermediate
stops as well as empty trips are
reduced considerably; increase
in elevator availability and
service capacity by up to 30 %
compared to conventional
elevator groups. Considerable
increase in comfort and
handling capacity: enter your
call at advanced flat touchscreen terminals in the elevator
lobby of each floor. Right after
entering a call the passenger is
informed which elevator will
bring him to his destination.
No additional car commands
inside the car are required. A
clear graphic display ensures
easy operation and leads to
high acceptance by the users.
s
Retrofitting of all Thyssen TCM elevator controls
possible.
s
High adaptability to customer requirements.
Individual solutions for operating surface.
s
Continously growing program of special functions,
such as operation by disabled, cleaners use etc.
Individual special functions can easily be
programmed and adapted to changing needs
during “elevator life”.
s
Pre-connected function codes and identification
systems such as card readers can be connected
optionally. This ensures efficient prevention of
misuse of special applications.
s
Identification codes for special floors.
s
Integration of building management information
possible.
Range of Functions and Operation:
In 2 or Optionally 3 Steps.
Destination selection control DSC
for buildings up to
approx. 10 floors.
2-step operation for every
type of run mode.
Normal operation. Terminal
display for normal operation.
Press touch-key of the desired
floor (here 5, for example) and
the elevator which can best serve
the call will be calculated and
assigned:
Special functions. Special and
transportation runs are only
carried out after release of
special, pre-set elevators:
Information. Press information
touch-key and on-line information
on how to use the elevator
appears:
Please directly select your destination stop. Afterwards enter the
assigned elevator.
For special runs with elevator 4 or
5 please identify by holding your
card close to card reader.
In order to activate special functions
please operate touch-key SF,
afterwards enter the respective
function code.
A destination selection control from Thyssen Aufzüge
This clear graphic display helps
you to find “your” elevator very
quickly. Dependent on the setting
the picture is displayed only
shortly or some seconds.
Afterwards main menu page
appears again.
After check of identification the
special function will be displayed.
Choose either the desired floor or
simply enter the elevator which
can best serve the special command.
Area selection
Selection of destination stop
Normal operation
In higher buildings, first select
the floor area of the destination stop.
Afterwards enter destination
stop.
The elevator which can best
serve this call is calculated
and assigned.
The destination
selection control
DSC for buildings
above 10 floors.
First select the building
area.
Thyssen Destination Selection Control DSC.
Overview of a New Way of Controlling Elevator
Controls.
Thyssen destination selection
control DSC is based on
advanced microprocessor
technology and decentralized
data pre-processing. Use of
CAN bus technology ensures
reliable connection of all
components. Thyssen
destination selection control
DSC with integrated remote
diagnosis is designed for
use with almost any drive
system: from traction elevators without machine room
up to high-speed elevators
with external rotor gearless.
Listed beside are performance features which can
be realized with destination
selection control DSC.
Door-open-button
Brake test switch
Door-close-button
Service hour meter
Door protection systems, e.g. light curtain
Trip counter
Door re-opening (closing force limitation)
External main switch incl. fuse
(by customers) or protective motor switch
(by customers)
Repeated door closing in case of lock failure
Arriving with opening door
Nudging device (door-specific)
Partly opening (door-specific)
Car partition door
Door re-opening caused by new destination call
Selective open-through
Overload (110 %)
Disconnection control and light
Occupied device (80 %)
Re-levelling
Misuse “destination call without passenger”
Loadweighing
Position indicator
Flashing direction arrows on arrival
Text announcing device
Arrival gong
Flashing direction arrows/hall lantern
Priority
Out-of-service indicator
Protective motor switch at control cabinet or wall
Alarm button with integrated emergency lighting
Two-way intercom system
Remote monitoring system Teleservice
Emergency evacuation system (Emergenzamatic)
Fireman’s function in case of fire
Additional emergeny car lighting
Special run
Parking stop
Automatic return
Call control for priority car
Automatic barring of stops
Compulsory stop
Changing main stop
Key-operated call control
Key-operated call control and disconnection
Preferred call assignment to elevator with lowest
load
Collective fault message
Continued group operation in case of failure of
one elevator
Temperature monitoring lifting motor
Coding of stops
Monitoring “installation blocked”
Overlay system (for modernisation phase)
Thyssen Aufzugswerke GmbH
A Company of Thyssen Aufzüge Division
P.O. Box 23 03 70, D-70623 Stuttgart, Germany
Telephone: +49 (0) 71 58 12 - 0, Fax: + 49 (0) 71 58 12 - 25 85
e-mail: info@aufzuege.thyssen.com, www.thyssen-aufzuege.com
Printed in Germany 9700 000 1471-0 02/01
The details quoted in this brochure can only be
viewed as binding when confirmed expressly in
writing.
Presented by: