Aerial Lift Truck Inspections
Transcription
Aerial Lift Truck Inspections
Bucket Truck Inspections Working Safely Aloft 2010 ITSC Denver, Colorado 1 Bucket Truck (aka Aerial Lift) 2010 ITSC Denver, Colorado 2 Typical “Bucket Truck” Vehicles – Personnel Positioning Bucket van – under 10,000 GVWR Bucket truck – 10,001+ Digger derrick with platform/basket – 26,001+ (material handling) Plant placer equipment with aerial platforms – 26,001+ (material handling) 2010 ITSC Denver, Colorado 3 Inspections – What Inspections? OSHA ANSI Manufacturer Federal Motor Carrier Safety Administration 2010 ITSC Denver, Colorado 4 Regulations & Standards 1910.67 1910.268 1926.453 ANSI/SIA A92.2-2009 (aerial lifts) ANSI/ASSE A10.31-2006 (digger derricks) Federal Motor Carrier Safety Regulations (49CFR parts 396.11, 396.13, 396.21) 2010 ITSC Denver, Colorado 5 Manufacturer’s Manual Operator’s manual Inspection schedule Forms Drawings – diagrams Maintenance schedule Safety decal listing 2010 ITSC Denver, Colorado 6 Inspections Daily Weekly Monthly Quarterly Biannually Annual (FMCSR & ANSI periodic) 2010 ITSC Denver, Colorado 7 Critical Items Proper tire inflation Operation of lift controls – all functions Emergency stop button works Pedestal base mounting bolts Wheel chocks – minimum of 2 Harness & lanyard in good condition 2010 ITSC Denver, Colorado 8 Daily Visual Inspection Hydraulic leaks – under truck & boom Loose/missing bolts, nuts, snap rings, cotter pins Cylinders & hoses Boom condition – welds, rust, damage Pedestal mounting bolts Bucket – mounting, door latch, safety 2010 ITSC Denver, Colorado 9 Turntable – bucket van 2010 ITSC Denver, Colorado 10 Boom; boom rest/cradle; pins, rings, bolts 2010 ITSC Denver, Colorado 11 Welds; look under the vehicle 2010 ITSC Denver, Colorado 12 Daily Visual Inspection Snow or ice buildup Outriggers Tire condition & inflation Safety decals Warning lights Safety/emergency equipment Fall protection harness & lanyard 2010 ITSC Denver, Colorado 13 Safety & Emergency Equipment Wheel chocks – minimum of 2 Outrigger pads/mats First aid kit Portable fire extinguisher – DOT 5 B:C Reflective triangles, fusees Spare fuses – 1 for each amp circuit 2010 ITSC Denver, Colorado 14 Wheel Chocks – minimum of 2 2010 ITSC Denver, Colorado 15 Safety & Emergency Equipment Petroleum spill kit Fall protection system Warning signs Traffic cones 2010 ITSC Denver, Colorado 16 Pedestal Mounting Bolts Look for the colored dye/paint mark on bolt and lock nut Four mounting bolts connect pedestal to truck bed/frame ¾” grade 8 bolt Torque to 160# (Dur-A-Lift examples) 2010 ITSC Denver, Colorado 17 Pedestal Mounting Bolts 2010 ITSC Denver, Colorado 18 Cargo Area Access to Inspect 2010 ITSC Denver, Colorado 19 Pedestal Collapse – Loose & Missing Bolts 2010 ITSC Denver, Colorado 20 Hydraulic Oil Level Sight gauge 2” from top of tank with cap removed (Dur-A-Lift) 2010 ITSC Denver, Colorado 21 Pre-Operation Inspection Operator tests daily before use Lower & upper controls Test all switches/controls Test hydraulic and 12 volt electrical “Safe operating condition” 2010 ITSC Denver, Colorado 22 PPE Inspection – Fall protection Full body harness with shock absorbing lanyard Shorter lanyard – 4’, maybe 3’ Inspected prior to use Wear, deterioration, cuts, loose threads, pulled rivets Manufacturer recommendation – 5 years use (from in-service date) 2010 ITSC Denver, Colorado 23 Commercial Motor Vehicle Inspection (DOT FMCSR) Covers truck chassis and safety/emergency equipment Pre-trip visual – “walk around” Post-trip written Driver vehicle inspection report Periodic (annual) Inspection decal on driver’s door 2010 ITSC Denver, Colorado 24 Resources - Manufacturers www.altec.com www.dur-a-lift.com www.versalift.com www.chocks.com 2010 ITSC Denver, Colorado 25 Resources – Regulations & Standards www.fmcsa.dot.gov www.osha.gov www.ansi.org www.buckettrucks.org 2010 ITSC Denver, Colorado 26 Inspections done – up we go 2010 ITSC Denver, Colorado 27 That’s It – Any Questions? 2010 ITSC Denver, Colorado 28