DRIVE-TECHNOLOGY - INKOMA / ALBERT

Transcription

DRIVE-TECHNOLOGY - INKOMA / ALBERT
INKOMA - GROUP
DRIVE-TECHNOLOGY
KSH Bevel gear high speed screw jack
INKOMA-GROUP
INKOMA-GROUP Headoffice
Sitz der INKOMA Maschinenbau GmbH
Neue Reihe 44
D - 38162 Schandelah - Germany
phone: +49/(0)5306-9221-0
fax:
+49/(0)5306-9221-50
e-mail: info@inkoma.de
internet: www.INKOMA-GROUP.com
We reserve the right to make technical changes.
2014-1-MP-OE-e © INKOMA-GROUP
INKOMA - GROUP
INKOMA ALBERT A - I - M
KSH Bevel gear high speed screw jack
Product description
Bevel gear high speed screw jack KSH-1 to KSH-3
The INKOMA-bevel gear high speed screw
jack type KSH is a modular design in 3 sizes.
Each size is available with two ratios; 2:1 and
3:1. All gear housings are cubic in form and
are machined on all faces. They are
manufactured from GG 25 grey cast iron.
INKOMA-bevel gear high speed screw jacks
are distinguished from INKOMA-precision
screw jacks HSG series by the use of spiral
bevel gear sets. These bevel gears are of
Klingelnberg form and are lapped together in
pairs. High quality alloy steel is used in their
manufacture and they are case hardened.
Robust rolling bearings support the input
shaft and the lifting spindle axis giving a long
and trouble free life.
INKOMA-bevel gear high speed screw jacks
provide a lifting speed of up to 30 m/min with
ball screw and 13.5 m/min with trapezoidal
spindle. Due to the high efficiency of the
integral bevel gears a high overall efficiency is
provided.(ca. 75 % for ball screw and ca. 40 %
with trapezoidal spindle).
For all situations INKOMA provides a
comprehensive range of accessories. All
drive components are compatible with one
another and with a wide range of applications.
INKOMA products are our own manufacture
and incorporate our very high quality
standards.
If you have further questions please consult
our local sales office or our factory engineers.
We are always ready to assist with or advise
about our products and their applications.
Please make use of our wide experience.
143
KSH Bevel gear high speed screw jack
Accessories for rotating spindle version R
Page references
The comprehensive range of accessories for KSH bevel gear high
speed screw jack allows the designer the flexibility to tailor the use of
the screw jack precisely to the application. All accessories are
manufactured to the same exacting standards as the rest of the
INKOMA product range.
Duplex nut - DFM
connection of two bellows adaption for lubrication
see page 194
Automatic lubrication device
allows continuous grease supply
see page 200
In addition to this comprehensive selection, customers special
requirements can be accommodated.
Please consult our engineering staff.
Bearing plate - GL
to support the free end of the spindle
see page 198
Flanged nut - FMS/FM
for standard applications
see page 192
Trapezoidal spindle nut - TM/ST
for applications where space is critical
see page 196
Self aligning nut flange - SL
allows articulating fitting
see page 200
Safety nut - SFM
allows wear monitoring
see page 194
Mounting feet - BP
provides an alternative method
see page 210
Cardan shafts - GX/GE
provide torsionally stiff resilient connections
see page 222
Support bearings - SNH
to support extended cardan shafts
see page 224
Folding bellows - FB
provide spindle protection
see page 216
Spiral protective sleeve - SF
provide spindle protection
see page 220
3 phase motor
flange or foot mounting
see page 234 - 237
Trunnion adaptor - KA
allows articulating fitting of flanged nut
see page 210
Motor adaptor - MG
for positive and efficient
mounting of motors
see page 230
Bearing block - LB
base mounting bearing unit for KA or SL
see page 214
Elaflex coupling - EFK
flexible shaft coupling
see page 224
Bearing flange - LF
base mounting bearing unit for KA or SL
see page 214
Gear coupling - M
standard or light duty version
see page 226
144
KSH Bevel gear high speed screw jack
Accessories for translating spindle versions SA, SVA
Page references
Rod end bearing - GSK
for simple attachment
of the spindle end
see page 202
Clevis - GK
for simple attachment
of the spindle end
see page 204
Mounting flange - BF
for simple attachment
of the spindle end
see page 202
Spiral protective sleeve - SF
provide spindle protection
see page 220
Folding bellows - FB
provide spindle protection
see page 216
Mounting feet - BP
provides an alternative method
see page 210
Cardan shafts - GX/GE
provide torsionally stiff resilient connections
see page 222
Support bearings - SNH
to support extended cardan shafts
see page 224
Trunnion adaptor - KA
allows articulating fitting of flanged nut
see page 210
Gear coupling - M
standard or light duty version
see page 226
Elaflex coupling - EFK
flexible shaft coupling
see page 224
Motor adaptor - MG
for positive and efficient
mounting of motors
see page 230
3 phase motor
flange or foot mounting
see page 234 - 237
Bearing block - LB
base mounting bearing unit for KA
see page 214
Bearing flange - LF
base mounting bearing unit for KA
see page 214
Setting ring and limit switch with roller follower
for monitoring of the spindle position
see page 208
Setting ring and inductive proximity switch
for monitoring of the spindle position
see page 208
145
KSH Bevel gear high speed screw jack
Contents list
KSH bevel gear high speed screw jack with rotating and translating spindles
page
Versions
i
rotating version (R),
translating version (SA, SVA)
Dimensions KSH-1 to KSH-3
trapezoidal spindle
rotating and translating version (R, SA, SVA)
Dimensions KSH-1 to KSH-3
ball screw spindle
translating version (SA, SVA)
Dimensions KSH-1 to KSH-3
ball screw spindle
rotating version (R)
Flanged nut dimensions
flanged nut to DIN 69051 for ball screws
rotating version (R)
i
146
Calculations
see category HSG (for HSG and KSH) pages 128 - 142
147
page
148 - 149
page
150 - 151
page
152 - 153
page
154 - 155
page
156
KSH Bevel gear high speed screw jack
Versions
Rotating version (R)
In rotating version (R) linear motion of the nut results from rotational
motion in the spindle.
The spindle is axially fixed in the screw jack gearbox.
Rotating spindle
Version R
Trapezoidal spindle
C35 / St60
Ball screw spindle
stainless steel
Cf 53
Translating version (SA, SVA)
In translating version (SA, SVA) the linear motion results from
movement of the spindle. In the translating spindle version the
spindle moves axially through the screw jack gearbox. It is necessary
to ensure that the spindle is fixed against rotation. Over-travel of the
spindle is limited by a travel limiter (SA). Use of the rotation prevention
device prevents potential spindle rotation (SVA).
Translating spindle
Version SA
Version SVA
Trapezoidal spindle
Ball screw spindle
C35 / St60
stainless steel
Cf 53
147
KSH Bevel gear high speed screw jack
Dimensions KSH-1 to KSH-3
Trapezoidal spindle - rotating and translating versions (R, SA, SVA)
INKOMA-bevel gear high speed screw jacks with trapezoidal spindles
are normally supplied filled with oil. The oil level glass, oil filler and
drain plug are normally on face D. Deviations from standard can be
specified when ordering. The output is usually at face B. Additional
input and output shafts can be provided on faces D, E and F.
Versions:
R:
Rotating spindle
Ratio:
2:1, 3:1
SA:
Translating spindle
with travel limiter
Lubrication:
Oil
Material:
GG-25
Accessories:
see ”Accessories” page 185 - 238
SVA: Translating spindle
with rotation prevention and travel limiter
Questionnaire: see “HSG” page 140 - 142
Ø D5 j6
L = length of the running nut
see “Accessories”
d
H28, H29 deep
L13
Ø d1 h9
B
Version
SA, SVA
stroke
Z= L10+stroke
L6 L7 stroke
Version
R
L11 L12
L
Z= L5+stroke+L
L8 L9
D5
B
KSH
Ø H4
INKOMA
D
Ø d4 f7
H3
H27
H1
X
Y
INKOMA
Z
KSH
D
C
H25, H26 deep
A
stroke+L14
H27
H7
A
C
Ø d2 h9
d3
X = Breather and oil filling plug
Y = Oil sight glass
Z = Oil drain plug
H19, H20 deep
H18
H17
W1
E
Ø H24 f7
H23
Size 2
H16
Bevel gear high speed screw jack
Rotating spindle
Stroke 500 mm
Ratio 2:1
KSH - 2 - R - 500 - 2:1
148
Ø W j6
W2
Ø H14
H21, H22 deep
Ordering example:
F
H23
H16
L17
L15
L16
KSH Bevel gear high speed screw jack
Lift per
revolution
i
[kN]
2:1 / 3:1
[mm]
KSH-1-R-stroke
KSH-1-SA-stroke
KSH-1-SVA-stroke
15
15
15
2,5 / 1,66
2,5 / 1,66
2,5 / 1,66
2:1 / 3:1
2:1 / 3:1
2:1 / 3:1
KSH-2-R-stroke
KSH-2-SA-stroke
KSH-2-SVA-stroke
40
40
40
3,5 / 2,33
3,5 / 2,33
3,5 / 2,33
KSH-3-R-stroke
KSH-3-SA-stroke
KSH-3-SVA-stroke
90
90
90
4,5 / 3,0
4,5 / 3,0
4,5 / 3,0
Order code
1)
Ratio
Mass
max. static
lifting force 1)
Dimensions [mm]
SA
d3
SVA
d3
46
-
42
-
45
60
60
60
60
60
60
60
-
65
-
70
90
90
90
90
90
90
90
-
95
-
90
150 / 140
150 / 140
150 / 140
d
D5
d1
d2
9
9
9
Tr 24x5
Tr 24x5
Tr 24x5
17
M18
M18
46
39
39
2:1 / 3:1
2:1 / 3:1
2:1 / 3:1
23
23
23
Tr 40x7
Tr 40x7
Tr 40x7
25
M30
M30
2:1 / 3:1
2:1 / 3:1
2:1 / 3:1
85
85
85
Tr 60x9
Tr 60x9
Tr 60x9
45
M48x2
M48x2
Ø
[kg]
d4
2:1 / 3:1
The values for max. load apply only for initial jack selection. The actual permitted lifting force depends on the version of the jack and the operating
conditions.
Dimensions [mm]
H1
H3
H4
H7
H14
H16
H17
2:1 / 3:1
H18
2:1 / 3:1
H19
H20
H21
H22
H23
H24
H25
H26
H27
H28
140
KSH-1-R-stroke
140
KSH-1-SA-stroke
KSH-1-SVA-stroke 140
90
90
90
75
75
75
23
-
72
72
72
90
90
90
85
85
85
122
122
122
-
-
M10
M10
M10
15
15
15
-
89
89
89
M8
M8
M8
10
10
10
-
-
190
KSH-2-R-stroke
190
KSH-2-SA-stroke
KSH-2-SVA-stroke 190
140
140
140
115
115
115
32
-
-
140
140
140
128
128
128
180
180
180
M12
M12
M12
20
20
20
-
-
113
113
113
135
135
135
M10
M10
M10
15
15
15
110
110
110
M10
M10
M10
295
KSH-3-R-stroke
295
KSH-3-SA-stroke
KSH-3-SVA-stroke 295
230
230
230
200
200
200
40
-
-
230
230
230
213 / 228
213 / 228
213 / 228
305 / 310
305 / 310
305 / 310
M20
M20
M20
30
30
30
-
-
180
180
180
225
225
225
M16
M16
M16
20
20
20
-
-
Order code
Dimensions [mm]
H29
L5
L6
L7
L8
L9
L10
L11
L12
L13
L14
L15
L16
2:1 / 3:1
L17
W
2:1 / 3:1
W1
2:1 / 3:1
W2
2:1 / 3:1
KSH-1-R-stroke
KSH-1-SA-stroke
KSH-1-SVA-stroke
-
90
-
25
-
20
-
20
-
25
-
50
50
23
23
5
5
22
22
60
70
2
2
2
35
35
35
10
10
10
18 / 12
18 / 12
18 / 12
6/4
6/4
6/4
28
28
28
KSH-2-R-stroke
KSH-2-SA-stroke
KSH-2-SVA-stroke
20
20
20
25
-
25
-
30
-
65
65
32
32
4
4
29
29
70
90
2
2
2
50
50
50
15
15
15
32 / 28
32 / 28
32 / 28
10 / 8
10 / 8
10 / 8
45
45
45
KSH-3-R-stroke
KSH-3-SA-stroke
KSH-3-SVA-stroke
-
25
-
25
-
55
-
95
95
40
40
7
7
48
48
105
105
2
2
2
90 / 80
90 / 80
90 / 80
20
20
20
55 / 40
55 / 40
55 / 40
16 / 12
16 / 12
16 / 12
80 / 60
80 / 60
80 / 60
Order code
105,5 25,5
145
-
40
-
149
KSH Bevel gear high speed screw jack
Dimensions KSH-1 to KSH-3
Ball screw spindle - translating version (SA, SVA)
INKOMA-bevel gear high speed screw jack with ball screw spindle are
normally supplied filled with oil. The oil level glass, oil filler and drain
plug are on face D. Deviations from standard can be specified when
ordering. The output is usually on face B. Additional input and output
shafts can be provided on faces D, E and F.
Versions:
Z= stroke+A
SVA: Translating spindle
with rotation prevention and travel limiter
GG-25
see “Accessories” page 185 - 238
H25, H26 deep
Y
Z
H1
INKOMA
KSH
H2
Questionnaire: see “HSG” page 140 - 142
B
X
H27
Accessories:
H28, H29 deep
Ø H4
Material:
Version
SA, SVA
Ø d4 f7
Oil
Ø D2 h9
H5
Lubrication:
Ø D1 h9
H3
2:1, 3:1
D5
A1
Ratio:
KGS dxP
N
SA: Translating spindle
with travel limiter
C
H27
A
stroke+X
X = Breather and oil filling plug
Y = Oil sight glass
Z = Oil drain plug
H5
D
Ø D2 h9
d3
H19, H20 deep
H18
H17
E
Ø H24 f7
H23
H16
F
H23
H16
L17
L15
Ordering example:
Bevel gear high speed screw jack
Size 2
Translating spindle with travel limiter
Stroke 500 mm
Ratio 2:1
Ball screw / size
KSH - 2 - SA - 500 - 2:1 - KGS 40x5
150
Ø W j6
W2
W1
H21, H22 deep
Ø H14
L16
KSH Bevel gear high speed screw jack
1)
max. static
lifting force 1)
Order code
Fdyn.
[kN]
Fstat.
[kN]
[mm]
KSH-1-SA/SVA-stroke-KGS-25x5
KSH-1-SA/SVA-stroke-KGS-25x10
14,9
13,2
15
15
KSH-2-SA/SVA-stroke-KGS-40x5
KSH-2-SA/SVA-stroke-KGS-32x10
KSH-2-SA/SVA-stroke-KGS-32x20
23,4
33,4
29,7
KSH-3-SA/SVA-stroke-KGS-63x10
KSH-3-SA/SVA-stroke-KGS-63x20
76
90
Ratio
Lift per
revolution
Lifting force
Dimensions [mm]
SA
X
SVA
X
60
60
70
75
70
75
70
70
70
90
90
90
85
100
110
95
110
120
90
90
150 / 140
150 / 140
105
105
115
115
SA
d3
SVA
d3
M14
M14
42
42
45
45
40x5
32x10
32x20
M30
M20
M20
65
65
65
63x10
63x20
M48x2
M48x2
95
95
i
KGS
dxP
D5
2,5 / 1,66
5 / 3,33
2:1 / 3:1
2:1 / 3:1
25x5
25x10
40
40
40
2,5 / 1,66
5 / 3,33
10 / 6,66
2:1 / 3:1
2:1 / 3:1
2:1 / 3:1
90
90
5 / 3,33
10 / 6,66
2:1 / 3:1
2:1 / 3:1
Ø
d4
2:1 / 3:1
The values for max. load apply only for initial jack selection. The actual permitted lifting force depends on the version of the jack and the operating
conditions.
Dimensions [mm]
Order code
A
A1
D1
D2
H1
H2
H3
H4
H5
H14
H16
H17
2:1 / 3:1
H18
2:1 / 3:1
H19
H20
H21
KSH-1-SA/SVA-stroke-KGS-25x5
KSH-1-SA/SVA-stroke-KGS-25x10
50
65
30
45
39
39
50
50
140
140
70
70
23
30
75
75
10
18
72
72
90
90
85
85
122
122
-
-
M10
M10
KSH-2-SA/SVA-stroke-KGS-40x5
KSH-2-SA/SVA-stroke-KGS-32x10
KSH-2-SA/SVA-stroke-KGS-32x20
80
95
105
51
73
83
60
60
60
78
190
190
190
95
95
95
32
32
32
115
115
115
10
-
140
140
140
128
128
128
180
180
180
M12
M12
M12
20
20
20
-
KSH-3-SA/SVA-stroke-KGS-63x10
KSH-3-SA/SVA-stroke-KGS-63x20
95
95
47
47
90
90
-
295
295
147,5
147,5
40
40
200
200
-
-
230
230
213 / 228 305 / 310 M20
213 / 228 305 / 310 M20
30
30
-
Dimensions [mm]
Order code
H22
H23
H24
H25
H26
H27
H28
H29
L15
L16
2:1 / 3:1
L17
N
W
2:1 / 3:1
W1
2:1 / 3:1
W2
2:1 / 3:1
KSH-1-SA/SVA-stroke-KGS-25x5
KSH-1-SA/SVA-stroke-KGS-25x10
15
15
-
89
89
M8
M8
10
10
-
-
-
2
2
35
35
10
10
20
20
18 / 12
18 / 12
6/4
6/4
28
28
KSH-2-SA/SVA-stroke-KGS-40x5
KSH-2-SA/SVA-stroke-KGS-32x10
KSH-2-SA/SVA-stroke-KGS-32x20
-
113
113
113
135
135
135
M10
M10
M10
15
15
15
110
110
110
M10
M10
M10
20
20
20
2
2
2
50
50
50
15
15
15
29
22
22
32 / 28
32 / 28
32 / 28
10 / 8
10 / 8
10 / 8
45
45
45
KSH-3-SA/SVA-stroke-KGS-63x10
KSH-3-SA/SVA-stroke-KGS-63x20
-
180
180
225
225
M16
M16
20
20
-
-
-
2
2
90 / 80
90 / 80
20
20
48
48
55 / 40
55 / 40
16 / 12
16 / 12
80 / 60
80 / 60
151
KSH Bevel gear high speed screw jack
Dimensions KSH-1 to KSH-3
Ball screw spindle - rotating version (R)
INKOMA-bevel gear high speed screw jack with ball screw spindle are
normally supplied filled with oil. The oil level glass, oil filler and drain
plug are on face D. Deviations from standard can be specified when
ordering. The output is usually on face B. Additional input and output
shafts can be provided on faces D, E and F.
Versions:
KGS dxP
R: Rotating spindle
Ø D5 j6
2:1, 3:1
Lubrication:
Oil
Material:
GG-25
Accessories:
see “Accessories” page 185 - 238
stroke
Dimensions of flanged nut
see page 154
A1
Questionnaire: see “HSG” page 140 - 142
Version
R
L1
Z= stroke+A
A2 E
Ratio:
H28, H29 deep
B
H25, H26 deep
X
KSH
H2
For all un-dimensioned parts see KSH version
with trapezoidal spindle.
Ø d4 f7
INKOMA
H1
H27
Z
C
D
X = Breather and oil filling plug
Y = Oil sight glass
Z = Oil drain plug
Ø H4
Y
A
H27
H19, H20 deep
H18
H17
H21, H22 deep
W2
Ø H24 f7
H23
H16
W1
E
F
H23
H16
L17
L15
Ordering example:
Bevel gear high speed screw jack
Size 2
Rotating spindle
Stroke 500 mm
Ratio 2:1
Ball screw / size
KSH - 2 - R - 500 - 2:1 - KGS 40x5
152
Ø W j6
Ø H14
L16
KSH Bevel gear high speed screw jack
max. static
lifting force 1)
Lift per
revolution
Fdyn.
[kN]
Fstat.
[kN]
[mm]
KSH-1-R-stroke-KGS-25x5
KSH-1-R-stroke-KGS-25x10
14,9
15
15
15
KSH-2-R-stroke-KGS-40x5
KSH-2-R-stroke-KGS-40x10
KSH-2-R-stroke-KGS-40x20
25,9
39,8
23,8
KSH-3-R-stroke-KGS-63x10
KSH-3-R-stroke-KGS-63x20
84,7
90
Order code
1)
Ratio
Lifting force
Dimensions [mm]
i
KGS
dxP
d4
2:1 / 3:1
D5
2,5 / 1,66
5 / 3,33
2:1 / 3:1
2:1 / 3:1
25x5
25x10
60
60
15
15
40
40
36
2,5 / 1,66
5 / 3,33
10 / 6,66
2:1 / 3:1
2:1 / 3:1
2:1 / 3:1
40x5
40x10
40x20
90
90
90
25
25
25
90
90
5 / 3,33
10 / 6,66
2:1 / 3:1
2:1 / 3:1
63x10
63x20
150 / 140
150 / 140
40
40
The values for max. load apply only for initial jack selection. The actual permitted lifting force depends on the version of the jack and the operating
conditions.
Dimensions [mm]
A
A1
A2
E
H1
H2
H4
H14
H16
H17
2:1 / 3:1
H18
2:1 / 3:1
H19
H20
H21
KSH-1-R-stroke-KGS-25x5
KSH-1-R-stroke-KGS-25x10
133
155
45
47
25
27
20
20
140
140
70
70
75
75
72
72
90
90
85
85
122
122
-
-
M10
M10
KSH-2-R-stroke-KGS-40x5
KSH-2-R-stroke-KGS-40x10
KSH-2-R-stroke-KGS-40x20
171,5
192,5
193,5
58,5
67,5
50,5
33
25
25
30
30
30
190
190
190
95
95
95
115
115
115
-
140
140
140
128
128
128
180
180
180
M12
M12
M12
20
20
20
-
KSH-3-R-stroke-KGS-63x10
KSH-3-R-stroke-KGS-63x20
265
295
65
65
35
35
45
45
295
295
147,5
147,5
200
200
-
230
230
213 / 228
213 / 228
305 / 310
305 / 310
M10
M20
30
30
-
Order code
Dimensions [mm]
Order code
H22
H23
H24
H25
H26
H27
H28
H29
L15
L16
2:1 / 3:1
L17
W
2:1 / 3:1
W1
2:1 / 3:1
W2
2:1 / 3:1
KSH-1-R-stroke-KGS-25x5
KSH-1-R-stroke-KGS-25x10
15
15
-
89
89
M8
M8
10
10
-
-
-
2
2
35
35
10
10
18 / 12
18 / 12
6/4
6/4
28
28
KSH-2-R-stroke-KGS-40x5
KSH-2-R-stroke-KGS-40x10
KSH-2-R-stroke-KGS-40x20
-
113
113
113
135
135
135
M10
M10
M10
15
15
15
110
110
110
M10
M10
M10
20
20
20
2
2
2
50
50
50
15
15
15
32 / 28
32 / 28
32 / 28
10 / 8
10 / 8
10 / 8
45
45
45
KSH-3-R-stroke-KGS-63x10
KSH-3-R-stroke-KGS-63x20
-
180
180
225
225
M16
M16
20
20
-
-
-
2
2
90 / 80
90 / 80
20
20
55 / 40
55 / 40
16 / 12
16 / 12
80 / 60
80 / 60
153
KSH Bevel gear high speed screw jack
Flanged nut dimensions
Ball screw spindle - rotating version (R)
INKOMA-flanged nut to DIN 69051 is the standard connection
method from the screw jack to the moving component.
KGS dxP
L4
S
L3
L1
Ø D1 g6
L2
Z= stroke+A
stroke
A2
E
Ø D5 j6
A1
-0,2
Ø D1 -0,3
B
INKOMA
KSH
C
D
A
Lubrication connection
Ø D4
Ø D3
Ø D2
Flanged nut DIN 69051
(hole pattern 1)
154
90°
B
90°
B
30°
30°
22,5°
Ø D4
Ø D3
Ø D2
Flanged nut DIN 69051
(hole pattern 2)
Order code
Hole pattern
KSH Bevel gear high speed screw jack
KSH-1-R-stroke-KGS-25x5
KSH-1-R-stroke-KGS-25x10
Dimensions [mm]
KGS
dxP
A
A1
A2
B
D1
D2
D3
D4
D5
E
L1
L2
L3
L4
S
2
2
25x5
25x10
133
155
45
47
25
27
48
48
40
40
62
62
51
51
6,6
6,6
15
15
20
20
43
61
10
10
10
16
5
5
M6
M6
KSH-2-R-stroke-KGS-40x5
KSH-2-R-stroke-KGS-40x10
KSH-2-R-stroke-KGS-40x20
1
1
1
40x5
40x10
40x20
171,5
192,5
193,5
58,5
67,5
50,5
33
25
25
70
70
70
63
63
63
93
93
93
78
78
78
9
9
9
25
25
25
30
30
30
50
70
88
14
14
14
10
16
16
7
7
7
M8x1
M8x1
M8x1
KSH-3-R-stroke-KGS-63x10
KSH-3-R-stroke-KGS-63x20
1
1
63x10
63x20
265
295
65
65
35
35
95
100
90
95
125
135
108
115
11
13,5
40
40
45
45
120
150
18
20
16
25
9
10
M8x1
M8x1
155
KSH Bevel gear high speed screw jack
Calculations
see category HSG (for HSG and KSH) pages 128 - 142
Selection of screw jacks
i
notes about the design arrangements of screw jack systems,
arrangement examples
HSG - KSH definitions / calculations
i
definition of the applied loads, torques and speeds
calculation of the duty
maximum duty ED [%/h]
HSG - KSH calculations
i
critical buckling loads on the lifting spindle Fcrit. [kN]
critical spindle speed ncrit. (only for rotating spindle version R)
HSG - KSH calculations
i
torque in the lifting spindle Msp. [Nm]
braking torque Mbr. [Nm]
input torque Min. [Nm] for each screw jack
HSG - KSH calculations
i
total input torque Mtot. [Nm]
input speed nin. [1/min], input power Pin. [kW]
actual lifting speed Vlift act. [m/min]
HSG - KSH gear housing material
i
selection table
Installation and maintenance
i
assembly, maintenance of HSG-0 to HSG-5
1.
2. ...........
3.
.......
...
156
HSG - KSH questionnaire / accessories
for quotation purposes
accessories for version R (rotating spindle)
accessories for version S, SA, SV, SVA (translating spindle)
page
128 - 129
page
130 - 131
page
132 - 133
page
134 - 135
page
136 - 137
page
138
page
139
page
140 - 142

Similar documents

DRIVE-TECHNOLOGY - INKOMA / ALBERT

DRIVE-TECHNOLOGY - INKOMA / ALBERT Automatic lubrication device allows continuous grease supply see page 200

More information

DRIVE-TECHNOLOGY - INKOMA / ALBERT

DRIVE-TECHNOLOGY - INKOMA / ALBERT Accessories for screw jacks types HSG, KSH, HSGK and DSH The comprehensive range of accessories for high capacity screw jacks types HSG, KSH, HSGK and DSH allows the designer the flexibility to tai...

More information

HEICO-LOCK WEDGE LOCK WASHERS

HEICO-LOCK WEDGE LOCK WASHERS maximum reliability. When the bolt is tightened, the external radial teeth of the HEICO-LOCK wedge lock washers embed themselves in an interlocking fashion with the respective mating surface. If th...

More information