Rivnet - Barbour Product Search

Roof covering
Rivnet
®
Aluminium roof edging and parapet
wall raising piece system
Content
Description of the system
Roof edging
Rivnet series 80
Rivnet EWIS
3
4–5
6–7
Parapet wall raising piece
Composite Rivnet series 80
One-piece Rivnet series 115
8–9
10 – 12
Rivnet Folio series
Sample specification clauses
Order / Request for quotation
13 – 14
15
16
Patented system. Registered trade marks and designs
Examples of use are given for information purposes only.
In the catalogue, all measurements are given in mm.
2
page
®
Elements of the system
Rivnet is the registered trade mark of an
extruded aluminium roof edging and parapet
wall raising piece system.
– The profiles of a standard length of 3000
mm. Their fixing flange is provided with
factory-drilled holes.
Function
– In the case of the parapet wall raising
piece, the system can be supplemented by
the Rivnet capping profile, which protects
the roof covering skirting at the top.
Roof edging
The roof edging strips have two essential
functions:
– The accessories: Junction pieces, internal
and external angles
– the function of a drainage or weather drip
strip, to keep rainwater away from the
external wall facings and thus protect
them;
Finishes
– to provide a stop for and to make good the
roof covering at the edge of the parapet
wall.
– Mill finish aluminium: non-treated
aluminium, reflective appearance, turning
matt over time
●
Parapet wall raising pieces
In addition to these two functions, the
parapet wall raising pieces also raise the
roof covering above the level of the existing
parapet wall. The parapet wall raising piece is
used when the height of the parapet wall does
not comply with the regulations, for example,
after the addition of insulation on the roof.
●
Rivnet Folio series
Roof edging system that provides a mechanical
fixing for roofing membranes by clamping
them between two aluminium profiles.
– The Danivit stainless steel fixings
80
Rivnet EWIS
160
– Danilac powder-coated aluminium, colour
RAL 9006 white aluminium
– Danilac powder-coated aluminium to any
RAL colour
Specification
Composite Rivnet series 80
The use of accessories (junction pieces,
internal and external angles) is obligatory for
installation in accordance with good practice.
80
Parapet wall raising piece
●
Rivnet series 80
Roof edging
Description of the system
One-piece Rivnet series 115
115
Rivnet Folio series
83,5
3
Rivnet Folio series
Rivnet
Rivnet series 80
®
20
Roof edging
Ri
vn
et
Series 80 contains 5 edging
strips that will resolve most
cases. They are characterised by
a 80 mm fixing flange and are
distinguished by the size of their
downstand.
80
0/
17
80
Ri
vn
et
80
5/
11
80
Ri
vn
et
0
/8
70
Ri
Roof edging
80
vn
et
0
/8
50
80
70
50
Ri
vn
et
0
/8
35
80
35
4
115
170
Rivnet series 80
®
Roof edging
Example of use
Rivnet 35/80
Scale: 1:1
5
3
4
1
2
1 Rivnet 35/80*
2 Junction bracket
3 Danivit stainless steel
fixing Ø 6
4 Concrete background*
* The application of a cold sealing
compound to the background
and to the Rivnet are important
for proper adhesion of the
weatherproofing.
15
Danivit stainless
steel fixing Ø 6
Elements of the system
Internal angle
External angle
50
80
150
150
Junction bracket
5
3000
Profile in standard length of
3000 mm
200
200
5
Roof edging
5 Flat roof covering
Rivnet EWIS
®
20
The shapes and sizes of these
Rivnet units provide a solution for
special cases, particularly when
external wall insulation systems
are in use.
Rivnet 60/115
Its 20 mm raising piece allows
thick weatherproofing systems to
be concealed.
115
Roof edging
6 x 9 mm oblong holes
every 300 mm
20
Double holes available
upon request
Rivnet 60/160
Its 160 mm flange allows its
use where the external wall has
insulation on the outside.
40
160
60
15
0/1
6
t
ne
Riv
RivEco 50/100
Its wide flange and its 50 mm
downstand make it the ideal edge
strip for refurbishment.
100
5
Accessories
Each profile has its own
accessories (junction pieces,
internal and external angles) that
are essential for installation in
accordance with good practice.
6
45
60
50
Riv
Ec
0
/10
o 50
0
/16
0
6
net
Riv
Example of use
Rivnet 60/160
Scale: 1:1
5 Insulation
6 Facing
1 Rivnet 60/160*
7 Flat roof covering
2 Junction piece
Rivnet EWIS
3 Danivit stainless steel fixing
Ø 6 (Double holes possible on
request)
4 Concrete background*
6
5
1
4
3
7
3
Roof edging
2
* The application of a cold sealing
compound to the background
and to the Rivnet are important
for proper adhesion of the
weatherproofing.
15
Some ideas for use ...
1
2
1 Roof finish stop bead to
conceal spalling
2 Circular roofs
Rivnet is fitted to the curve by
factory-cutting of the flange
to a given radius.
7
*Rivnet capping:
Option for the
composite Rivnet
series 80
Raising piece of 170
0
0/8
17
net
Riv
170
On the basis of
the five standard
patterns, it is
possible to create
twenty types
of parapet wall
raising pieces.
Rivnet series 80
®
composite
parapet wall raising piece
35
Raising piece of 115
80
A combination of the various Rivnet is used to
form a raising piece of the required height.
The Rivnet thus composed is supplied either in
two sections to be clipped together easily on
site (ease of handling, reduction of volume to
transport), or in a single welded piece.
In your orders, always state the type of
composite Rivnet selected.
The first figure indicates the upper Rivnet and
the second the lower Rivnet.
115
35
Raising piece of 50
50
35
net
Riv
Type of
Rivnet
Visible height
in mm
Raising piece of 50
50/35/80
50/50/80
50/70/80
50/115/80
50/170/80
85
100
120
165
220
105
120
140
185
240
80
35/
0
net
Riv
8
50/
Parapet wall raising piece
150
165
185
230
285
80
50/
net
Riv
205
220
240
285
340
If a raising piece of more than 170 mm is
required, please refer to the solutions in the
Bandonet system shown in the Bandonet
catalogue.
50
0
0/8
70
70
0
0/8
17
net
Riv
0
0/8
et 5
n
v
Ri
0
0/8
7
net
Riv
115
0
7
net
Riv
/80
/80
115
net
v
i
R
70
0
0/8
et 7
n
v
Ri
80
/
170
net
Riv
70
80
70/
net
v
i
R
115
170
/80
115
net
v
i
R
0
0/8
7
net
Riv
115
0
5/8
t 11
e
n
Riv
0
5/8
t 11
e
n
Riv
80
15/
et 1
n
v
Ri
70
0
0/8
7
net
Riv
170
170
80
50/
net
Riv
/80
115
net
Riv
115
80
15/
et 1
n
v
Ri
net
Riv
50
50
115
80
50/
170
170
80
35/
net
v
i
R
80
70/
net
Riv
5
net
Riv
115
50
115
80
35/
net
v
i
R
80
/
170
net
Riv
0
0/8
et 5
n
v
Ri
80
70/
net
Riv
/80
170
net
v
i
R
8
70
0
0/8
7
net
Riv
70
70
Raising piece of 170*
170/35/80
170/50/80
170/70/80
170/115/80
170/170/80
35
0
0/8
et 5
n
v
Ri
Raising piece of 115*
115/35/80
115/50/80
115/70/80
115/115/80
115/170/80
70
50
50
50
Raising piece of 70
70/35/80
70/50/80
70/70/80
70/115/80
70/170/80
50
0
0/8
5
net
Riv
Raising piece of 70
/80
115
net
v
i
R
80
35/
net
Riv
115
0
5/8
t 11
e
n
Riv
170
170
170
/80
170
net
v
i
R
0
0/8
17
net
Riv
/80
170
net
v
i
R
/80
170
net
v
i
R
8
4
1
3
Rivnet series 80
®
7
Composite parapet wall
raising piece
Example of use
Rivnet 170/50/80
Scale: 1:1
1 Rivnet 170/80*
2 Rivnet 50/80
9
3 Junction piece
5
6
4 Rivnet capping
5 Danivit stainless steel fixing Ø 6
6 Concrete background*
7 Galvanised steel kerb (not supplied)*
8 Mastic adhesive
9 Flat roof covering
* The application of a cold sealing compound
to the background and to the Rivnet are
important for proper adhesion of the
weatherproofing.
Elements of the system
Rivnet capping
Internal angle
2
Danivit stainless steel
fixing Ø 6
External angle
150
50
Junction pieces
Profiles in standard
lengths of 3000 mm
Parapet wall raising piece
3
20 min.
150
5
200
200
9
Type of
Rivnet
Raising piece Lap
in mm
in mm
85/115
100/115
130/115
170/115
200/115
43
58
88
128
158
Visible height
in mm
42
42
42
42
42
85
100
130
170
200
Rivnet series 115
®
One-piece
parapet wall raising piece
15
0/1
0
1
net
Riv
The 115 series contains 5 profiles
that are characterised by a
115 mm fixing flange providing
a stable bedding and a
greater projection from
the external wall.
5
/11
0
3
1
net
v
i
R
58
115
100
42
88
20
115
130
Parapet wall raising piece
6 x 9 mm oblong holes
every 300 mm
43
115
42
85
42
115
/
5
8
net
Riv
10
g
pin
p
a
c
net
v
i
R
5
/11
0
7
1
net
Riv
Rivnet series 115
®
One-piece
parapet wall raising piece
5
/11
0
0
2
net
v
i
R
Usable as an edge strip or as a
parapet wall raising piece, the
profiles of the 115 series are in a
single piece (one-piece).
They have a common overlap of
42 mm and differ in their raising
piece of 43 to 158 mm.
6 x 9 mm oblong holes
every 300 mm
128
170
115
158
20
200
42
Parapet wall raising piece
The system is supplemented by
the Rivnet capping profile, which
protects the roof covering at the
top and is fixed by interlocking
and polyurethane sealant
adhesive.
115
42
11
7
3
1
2
Rivnet
series 115
®
6
One-piece
parapet wall raising piece
4
Example of use
Rivnet 170/115 one-piece
Scale: 1:1
8
5
1 Rivnet 170/115*
2 Junction piece*
3 Rivnet capping
4 Danivit stainless steel fixing Ø 6
5 Concrete background*
6 Galvanised steel kerb (not supplied)*
7 Sealant adhesive
8 Flat roof covering
* The application of a cold sealing compound
to the background and to the Rivnet are
important for proper adhesion of the
weatherproofing.
2
15
Parapet wall raising piece
Elements of the system
Rivnet
capping
Internal angle
Danivit
stainless steel
fixing Ø 6
Profile in standard
length of 3000 mm
External angle
150
50
12
Junction piece
150
5
200
200
Rivnet Folio series
®
Protection of fixing for
roofing membranes
Description of the system:
● a base profile
● a protective cover
Visible heights available:
100 mm
150 mm
●
●
Ease of fixing
The rounded and very accessible
shape of the base profile allows
the roof covering to be turned
up properly and the profile to
be adjusted to the correct level
easily.
20
e
l
rofi
p
e
as
B
The top of the roof covering is
effectively protected from the
weather by the protective cover
and is held in place by the striations provided for this purpose.
e
ofil
e pr
er
cov
n
tio
tec
o
r
P
83,5
6 x 9 mm oblong holes
every 300 mm
Bas
150
83,5
The cover is installed by simple
rotation. It adapts automatically
to all types of roof covering
raising pieces, from 1,2 mm up to
10 mm thick.
Appearance
The rounded line on the outside
and the harmonious overlap
on the inside are, in addition,
aspects that are very much
appreciated by architects
requiring a perfect finish.
100
0
10
olio
F
t
ne
Riv
0
15
olio
F
t
ne
Riv
13
Rivnet Folio series
The units are fixed using 4.8 x 16
mm self-tapping screws with a
sealing washer.
Example of use
Rivnet Folio 100
Scale: 1:1
Rivnet Folio series
®
Protection of fixing for
roofing membranes
8
7
6
4
1 Base profile
5 4.8 x 16 mm self-tapping
screw with sealing washe
2 Protective cover
6 Concrete background
3 Junction piece
7 Flat roof covering
4 Danivit stainless steel
fixing Ø 6
8 Cover strip
1
2
3
5
7
100
20 min.
4.8 x 16 mm selftapping screw with
sealing washer
Danivit stainless steel
fixing Ø 6
Profile in standard
length of 3000 mm
External angle
200
200
Rivnet Folio series
150
150
5
150
Internal angle
5
60
Junction piece
Elements of the system
14
150
200
200
Rivnet
®
Sample specification clauses
Parapet wall raising piece
type Rivnet series 80 composite
Rehausse
Extruded aluminium parapet wall raising piece, type Rivnet *
as
manufactured by dani alu (Tel.. +33 4 78 87 12 48), or technically equivalent. The units shall be
connected together using junction pieces. The angles and special parts shall be factoryprefabricated.
* select from the following 20 patterns :
Patterns
15
Recouvrement
80
Rivnet 170/50/80
Download the typical sections
and specification clauses you
need for your project from
www.danialu.com
.
The quality of the aluminium shall be **
Raising piece (mm)
Overlap (mm)
–
–
–
–
–
Rivnet 50/35/80
Rivnet 50/50/80
Rivnet 50/70/80
Rivnet 50/115/80
Rivnet 50/170/80
50
50
50
50
50
35
50
70
115
170
–
–
–
–
–
Rivnet 70/35/80
Rivnet 70/50/80
Rivnet 70/70/80
Rivnet 70/115/80
Rivnet 70/170/80
70
70
70
70
70
35
50
70
115
170
–
–
–
–
–
Rivnet 115/35/80
Rivnet 115/50/80
Rivnet 115/70/80
Rivnet 115/115/80
Rivnet 115/170/80
115
115
115
115
115
35
50
70
115
170
–
–
–
–
–
Rivnet 170/35/80
Rivnet 170/50/80
Rivnet 170/70/80
Rivnet 170/115/80
Rivnet 170/170/80
170
170
170
170
170
35
50
70
115
170
** select from the following 3 possibilities :
– Untreated aluminium
(Non-treated aluminium, reflective appearance, turning matt over time.)
– Danilac powder-coated aluminium colour RAL 9006
(white aluminium)
– Danilac powder-coated aluminium in any RAL colour
(Powder-coated aluminium using Danilac process – chrome-free, colour to be selected
from RAL range.)
15
Rivnet
dani alu UK Ltd.
Hexagon House, Avenue Four
Witney, Oxfordshire, OX28 4BN
Phone: 01865 595160
Fax: 01865 595161
E-mail: contact@danialu.co.uk
www.danialu.com
®
Date:..
Page:..
of..
Company / address / company stamp:..
(Tick the options required)
Phone:..
Contact:..
Fax:..
Mobile:..
Request for quotation
Site reference:..
e-mail:..
estimate
Supervising Officer:..
Order
In the case of an order, attach a survey of the dimensions
job on site
Anticipated date of the works:
Specifier:..
Roof edging
Pattern
Rivnet series 80 (page 4 – 5)
m
Rivnet EWIS (page 6 – 7)
m
Accessories:
Parapet wall raising piece
Junction pieces
No.
External angles
No.
Internal angles
No.
Rivnet capping
m
Pattern
Quantity
Rivnet series 80 composite (page 8 – 9)
m
Rivnet series 115 one-piece (page 10 – 12)
m
Accessories:
© 10/2012 dani alu • Subject to modifications.• 11-0185 • Druckhaus Müller
Quantity
Rivnet Folio series
Junction pieces
No.
External angles
No.
Internal angles
No.
Rivnet capping
m
Pattern
Quantity
Rivnet Folio series (page 13 – 14)
Accessories:
Finish of aluminium:
Rate
Amount
Rate
Amount
Rate
Amount
m
Junction pieces
No.
External angles
No.
Internal angles
No.
Mill finish aluminium
Powder-coated aluminium, RAL 9006 white aluminium
Powder-coated aluminium RAL No.
(state)