Introduction Introduction

Introduction
XE ------ European Parts Distribution System
Overview
AO ------ South America Parts Distribution System
The Parts List section provides exploded view illustrations of
all spared subsystem components and a listing of the
corresponding part numbers. The illustrations show the
relationships between parts.
Organization of this Section
The following elements make up the Parts List section:
Parts Lists (PL)
Each item number in the part numbers listing corresponds to
an item number in the illustration. All the parts in a given
subsystem of the machine will be located in the same
illustration or in a series of associated illustrations. The parts
which are not spared are indicated by “- -” in the Part column.
Exploded View Illustrations
An item that is called out on an illustration has a
corresponding listing within this section.
Components are given item numbers that correspond to the
part number listings.
Hardware items are lettered. All hardware dimensions are in
millimeters unless otherwise noted.
Assemblies and kits are a combination of several separate
components. A bracket is used on the illustration when an
assembly or kit is spared but is not shown. The item number
of the assembly or kit precedes the bracket; the item numbers
of the piece parts follow it.
XCL ------ Canada Parts Distribution System
P/J ------ Plug/Jack
P/O ------ Part of
W/ ------ With
W/O ------ Without
Tag
A Tag is used when a part or area of the system has been modified. The Change Tag Index, which is found in the General
Procedures/Information Section, lists the name and purpose of the Tag. In some cases, you will go to the parts lists and find a
part number listed as “with Tag.” Go to the Change Tag Index for a description of what the Tag is and what you need to install the
Tag. The Change Tag Index will either list a kit number or indicate “piece part.” If “piece part” is indicated, the parts lists
reference(s) will be given and all parts associated with the Tag will have to be individually located, ordered, and installed.
The notation “P/O Tag” after a part number indicates that the item is part of a Tag. The notation “Tag” after a part number will be
used only to indicate the entire Tag, whether that is a kit number or an individual part.
Whenever you install a Tag kit or all the piece parts that make up a Tag, mark the appropriate number on the Tag matrix.
Using the Parts List
1.
The numbers shown in each illustration correspond to the parts list number for that illustration.
2.
Throughout this manual, parts are identified by the prefix “PL”, followed by a number, a decimal point, and another number.
For example, PL3.1.12 means the part is item 12 of parts list 3.1.
3.
The capital letters “C”, “E”, and “S” shown in an illustration stand for C-ring, E-ring, and Screw, respectively.
4.
A shaded triangle t in an illustration indicates the item is part of an assembly.
5.
The notation “with X~Y” following an part name indicates an assembly that is made up of components X through Y. For
example, “1 (with 2~4)” means part 1 consists of part 2, part 3, and part 4.
Part Number Index
6.
The notation "RS" means that the part is a requested spare. Part numbers for these parts will be provided as soon as they
are available.
This index lists all the spared parts in the system in numerical
order. Each number is followed by a reference to the parts list
on which the part may be found.
7.
An asterisk * following a part name indicates the page contains a note about this part.
8.
The notation “J1<>J2 and P2” is attached to a wire harness. It indicates that connector jack 1 is attached to one end of the
wire harness and connector jack 2 is attached to the other end that is plugged into plug 2.
9.
A notation "(part of item 1.1)" indicates that the part is included with item 1.2.1 (PL1.2, line item 1).
Other Information
Abbreviations
Abbreviations which may be used in the parts lists text or
illustrations are as follows:
US ------ United States Parts Distribution System
Initial Issue
DocuPrint N2125
02/2000
5-3
Parts-list
Introduction
PL 1.1 Covers (1 of 3)
Item
Part
Description
1
2
3
4
5
6
7
8
48E64591
802K11330
48E64642
48K76454
802K09700
162K55281
48E64612
802K10800
9
10
11
12
13
14
15
16
17
18
19
------------3E48991
----3E43880
50K39130
48E64624
----891E95830
Left Cover
Left Interface Cover
Option Cover
Top Cover Assembly
Control Panel Assembly (with 6)
Control Panel Harness Assembly
Right Cover
Front Cover Assembly (with 10-13,
15-17, 20, 22)
Front Cover
Left Latch Assembly
Lever
Right Latch Assembly
Stopper Cover
Envelope Chute
Tray Stopper
MBF Tray Assembly
Left Front Cover
MBF Chute
Control Panel Overlay (English
110V)
Control Panel Overlay (Symbols
220V)
Control Panel Overlay (Spanish)
Control Panel Overlay (Portuguese)
Control Panel Overlay (French
Canadian)
Xerox Logo Badge
Hardware Kit (Includes Screw)
892E03010
892E15040
892E15050
892E15020
20
S
892E08500
600K79660
Initial Issue
DocuPrint N2125
02/2000
5-4
Parts-list
PL 1.1
PL 1.2 Covers (2 of 3)
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
S
Part
Description
------------------------600K79530
54K14991
----3E46120
--------802K10010
600K79660
Latch Spring
Left Latch
Right Latch
Latch Cover
Rear Cover
Direction Arm
Cap Kit (quantity 2)
Face Up Chute Assembly
Right Pivot Stopper
Stopper
Duplex Guide Rail-Left
Duplex Guide Rail-Right
Rear Cover Assembly (with 1-9)
Hardware Kit (Includes Screw)
Initial Issue
DocuPrint N2125
02/2000
5-5
Parts-list
PL 1.2
PL 1.3 Covers (3 of 3) Options
Item
Part
Description
1
-----
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
S
--------------------------------------------54K14991
--------3E46120
600K79530
600K79660
Rear Face-up Cover Assembly
(with 2-15)
Latch Spring
Left Latch
Right Latch
Latch Cover
Rear Cover
Face-up Sub Tray
Face-up Main Tray
Eliminator
Pinch Spring
Pinch Roll
Direction Arm
Face-up Chute Assembly
Right Stopper Pivot
Face-up Ground Spring
Right Stopper
Cap Kit (quantity 2)
Hardware Kit (Includes Screw)
Initial Issue
DocuPrint N2125
02/2000
5-6
Parts-list
PL 1.3
PL 2.1 Tray 1 (1 of 2)
Item
Part
Description
1
109R00448
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
S
----------------------------------------------------------------------------600K79660
Cassette Assembly (with 2-20 and
PL 2.2)
Bottom Plate Assembly
Customer Size Knob
Custom Size Plate
End Guide Assembly
Extension Housing
Rack Slide
Extension Spring
Latch Spring
Size Plate
Base Extension
Left Side Guide Assembly
Right Side Guide Assembly
Link
Tray 1 Base
Rack
Pinion
Sub Cassette Assembly
Tray 1 Actuator
Actuator Cover
Hardware Kit (Includes Screw)
Initial Issue
DocuPrint N2125
02/2000
5-7
Parts-list
PL 2.1
PL 2.2 Tray 1 (2 of 2)
Item
Part
Description
1
-----
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
S
--------------------5K82890
600K79550
----809E11830
--------------------------------------------127K24682
--------114E11680
--------600K79660
Cassette Assembly (with 2-27) (P/
O PL 2.1 Item 1)
Retard Cap
Retard Chute Base - Left
Retard Chute
Retard Chute Base - Right
Retard Shaft Assembly
Friction Clutch Assembly
Roll Assembly Kit
Retard Bracket
Retard Spring
Tongue Plate
Tongue Shaft Assembly
Lift Up Shaft Holder
Bearing
Lift Up Ground Spring
Cassette Housing
Lever
Cassette Handle Assembly
Motor Spring
Right Holder
Left Holder
Motor Assembly
Bearing
Motor Holder Assembly
Connector
Spring
Socket Guide
Hardware Kit (Includes Screw)
Initial Issue
DocuPrint N2125
02/2000
5-8
Parts-list
PL 2.2
PL 3.1 Paper Feeder
Item
Part
Description
1
2
3
4
5
6
7
8
9
10
11
12
22K51531
121K20151
----809E11630
----120E16960
830E18131
---------------------
13
14
15
16
17
18
19
20
21
22
130E81970
162K47211
----------------600K79320
-------------
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
130E81970
--------------------809E11610
------------------------160K52781
121K19010
------------600K79640
600K79650
22K56900
600K79550
108R00330
46
600K79660
Turn Roll Assembly (with 2)
Turn Clutch Assembly
Extension Spring
Chute Spring
Feed CST Cover
No Paper Actuator
Support Actuator
Feeder Frame Assembly
Clamp
Left Latch Spring
Low Paper Actuator (P/O item 42)
Low Paper Actuator Support (P/O
item 42)
Low Paper Sensor
No Paper Sensor Harness Assy.
Front Chute Assembly
Turn Chute
Roll 7
Feeder Cover
Feed Head Assembly (with 20-28)
Feed Shaft (P/O item 19)
Bearing (P/O item 19)
Nudger Support Assembly (P/O
item 19)
Stack Height Sensor (P/O item 19)
Gear Clutch (P/O item 19)
O/W Clutch Assembly(P/O item 19)
Roll Assembly (P/O item 44)
Gear 25T (P/O item 19)
Gear 31T (P/O item 19)
Nudger Spring
Gear 4
Gear 2
Gear Cover
Bracket
Gear 3
Gear 1
Feeder PWB
Feed Clutch Assembly
Bearing
N/MOT Harness Assembly
Socket
Socket & Harness Kit (with 39, 40)
Actuator & Support Kit (with 11, 12)
Feeder Assembly 1 Kit (with 1-40)
Feed Roll Kit (item 26- quantity 3)
Feed Roll Usage Kit (item 44quantity 2)
Hardware Kit (includes screw)
Initial Issue
DocuPrint N2125
02/2000
5-9
Parts-list
PL 3.1
PL 4.1 MBF Chute
Item
Part
Description
1
2
3
4
5
6
7
8
9
10
11
12
54K13630
----------------22K50812
--------------------120E17120
13
14
15
16
17
18
19
20
21
22
23
24
25
--------19K94570
130E81970
--------121E85920
809E20170
7E54660
----113K82141
----162K47021
26
S
19K96830
600K79660
MBF Chute Assembly (with 2-30)
MBF Roll Assembly (with 3-6, 28)
MBF Shaft Assembly
MBF Pick-up CAM
Core
MBF Roll Assembly
Bearing
Tray Bottom Assembly (with 11, 12)
MBF Bottom Pad
Tray Pick-up
Tray Bottom (P/O item 8)
MBF No Paper Actuator (P/O item
8)
MBF Bottom Spring Tray
Exit Bearing
Retard Pad Assembly
Paper Set Sensor
MBF Ground Plate
MBF Chute Assembly
Pick Up Solenoid
MBF Spring
Gear Pick Up
Envelope Connector Plate
Envelope Connector Assembly
MBF (Left) Cam Pick-up
MBF No Paper Harness Assembly
(J45-J451)
Pick Up Pad Assembly (with 9, 10)
Hardware Kit (Includes Screw)
Initial Issue
DocuPrint N2125
02/2000
5-10
Parts-list
PL 4.1
PL 5.1 Paper Handler Assembly
Item
Part
Description
1
2
3
4
------------54K14980
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
--------59K11910
--------120E13331
809E19721
130E81970
----9E79120
7E54671
7E54681
--------121E85820
--------------------------------162K47011
29
30
31
32
-----------------
33
34
35
36
37
S
----6E60980
7E54650
809E19030
600K79380
600K79660
Toner Sensor
Toner Holder Sensor
Toner Spring Sensor
Paper Handler Assembly (with 2, 531)
Registration Roll - Metal
Upper Chute Assembly
Registration Roll - Rubber
Chute Inlet
Ground Spring - Bottom
Registration Actuator
Registration Sensor Spring
Registration Sensor
Metal Bearing
Registration Spring - Right
Registration Gear - Metal
Registration Gear - Rubber
Right Bearing - Rubber
Left Bearing - Rubber
Registration Clutch
Upper Chute Bottom
Ground Spring - Right
Ground Spring - Center
Ground Screw
Left Spring
Resist Baffle
Lower Chute Bottom
CST Chute
Registration Harness Assembly
(J43-J431, J432)
Torsion Spring
Lever Handle
Right Metal Bearing
Toner Sensor Harness Assembly
(J42-J421)
TNS Cushion
Shaft 14
Gear 14
Registration Spring Left
Toner Sensor Kit (with 1-3, 32 & 33)
Hardware Kit (Includes Screw)
Initial Issue
DocuPrint N2125
02/2000
5-11
Parts-list
PL 5.1
PL 6.1 Chute Transport & Fuser
Item
Part
Description
1
2
3
4
5
6
22K55010
54K15000
------------126K10132
7
8
9
126K10141
--------162K47191
BTR Assembly
Transfer Chute Assembly (with 3-5)
Bearing BTR SUP
Spring BTR
Transport Chute (reference only)
Fuser Assembly (120V) (with 10,
11)
Fuser Assembly (230V)
DTS Wire Assembly
TR Wire Assembly
Fuser Harness Assembly (120V)
(J271, J11, J27, J262)
Fuser Harness Assembly (230)
(J271, J11, J27, J262)
Fuser Upper Cover Assembly
Heat Rod (120V)
Heat Rod (230V)
Usage Kit (120V) (with Fuser, BTR,
3 Feed Rolls)
Usage Kit (230V) (with Fuser, BTR,
3 Feed Rolls)
Hardware Kit (Includes Screw)
162K51861
10
11
12
802K10000
126K08410
126K09710
108R00328
13
108R00329
S
600K79660
Initial Issue
DocuPrint N2125
02/2000
5-12
Parts-list
PL 6.1
PL 7.1 Exit
Item
Part
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
105K14903
120E13350
----------------59K11950
------------59K11960
----------------130E81970
162K46981
18
19
20
21
22
23
24
25
26
------------127K24111
------------600K79540
54K15890
S
600K79660
Static Eliminator Assembly
Stack Full Actuator
Exit Gate
Exit Spring
Exit-17 Gear
Exit Bearing
MID-1-3 Roll Assembly
Out Exit Roll Pinch
Exit Roll Pinch
Exit Spring Pinch
MID-2 Roll Assembly
Roll Pinch
MID Spring Pinch
Spring Pinch
Exit Chute
Exit Photo Sensor
Stack Full Sensor Harness
Assembly (J30-J301)
Interlock Cover
Exit-23 Gear
Exit-33 Gear
Exit Motor Assembly
Exit Gear 17/47
Exit Gear -32
Exit Ground Spring
Bearing Kit (quantity 6 of item 6)
Exit Chute Assembly (with 1-16, 17,
19-24)
Hardware Kit (Includes Screw)
Initial Issue
DocuPrint N2125
02/2000
5-13
Parts-list
PL 7.1
PL 8.1 Drive & Xerographics
Item
Part
Description
2
113R00445
113R00446
-----
3
4
----32K94111
5
6
---------
7
162K46922
8
-----
9
10
62K09600
-----
11
12
13
14
15
--------7K85220
127K27791
32K94130
S
600K79660
Print Cartridge (XC 10K)
Print Cartridge (XC 15K)
Print Cartridge Sensor Harness
Assembly (J25-J251) (P/O item 15)
Arrow Label
Print Cartridge Top Guide
Assembly
Spring (P/O item 15)
Print Cartridge Sensor Assembly
(P/O item 15)
Laser Harness Assembly (J21J211, J212, J213)
VDO Harness Assembly (J22J223) (P/O item 7)
Laser Assembly
Print Cartridge Side Guide
Assembly-R (with 11, 12)
Print Cartridge Side Guide
Spring Clip
Drive Gear Assembly
Main Motor Assembly
Print Cartridge Sensor Kit (with 2,
5, 6)
Hardware Kit (Includes Screw)
1
Initial Issue
DocuPrint N2125
02/2000
5-14
Parts-list
PL 8.1
PL 9.1 Frame & Size Sensor
Item
Part
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
------------------------127K24771
--------------------162K47001
14
15
16
17
18
19
20
21
22
S
--------------------160K52771
162K48420
----802K09970
600K79660
Left Plate Assembly
Clamp Press
Left Clamp Press
Interface Clamp
Lower B Elec Box
Lower A Elec Box
Fan Assembly
Duct
Edge Saddle H
AC Clamp
Insulator Plate
Plate Handle
Feeder Harness Assembly (J33J331)
CAM Shaft
Size Sensor Actuators
Cover Size Sensor
Spring CAM
Lever CAM
Tray 1 Size PWB
Size Harness Assembly (J51-J52)
Size Sensor Housing
Size Sensor 1 Kit (with 13-21)
Hardware Kit (Includes Screw)
Initial Issue
DocuPrint N2125
02/2000
5-15
Parts-list
PL 9.1 Frame & Size Sensor
PL 10.1 Electrical
Item
Part
Description
1
162K47201
2
160K65650
160K65940
3
4
----162K49271
5
6
7
8
9
--------110K08571
----162K46991
10
162K46941
11
12
13
14
15
160K52761
110K08561
160K52414
105K15401
162K46972
16
105K14931
105K15411
110E93711
162K46962
105K14954
----160K71520
160K71530
160K71540
System Controller Harness
Assembly (J287-J282, J288)
System Controller PWB (Network)
System Controller PWB (Nonnetwork)
Back Panel
OCT Harness Assembly (J35P351)
Adapter
Power Cord
Rear Interlock Switch Assembly
AC Wire Assembly (J285)
Duplex Harness Assembly (J34P341)
Connector Harness Assembly (J23J231)
Connector PWB
Front Interlock Switch Assembly
Print Engine Controller PWB
5VDC PWB
LVPS Harness Assembly (J28J218)
LVPS PWB (120V)
LVPS PWB (230V)
Main Switch
HVPS Harness Assembly
HVPS PWB
HVPS Housing
Serial Card
10 Base 2 Network Card
Token Ring Card
Hard Disk Drive
16 mb Dimm
32 mb Dimm
64 mb Dimm
8 mb Flash Dimm
Hardware Kit (Includes Screw)
17
18
19
20
21
22
23
24
S
733W14695
733W14696
733W14697
160K71940
600K79660
Initial Issue
DocuPrint N2125
02/2000
5-16
Parts-list
PL 10.1
PL 11.1 500 Sheet Feeder (1 of 2)
Item
Part
Description
1
-----
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
----7E54920
----162K48431
----160K53061
--------------------162K48420
--------802E04930
22K56910
109R00448
802E04920
600K79670
802K09980
S
600K79660
Option Feeder Assembly (with 220)
Gear OPT Bracket Assembly
Gear OPT I
Top Plate
Option Size Harness Assembly
Size Sensor Housing
Size Option PWB
CAM Spring
CAM Lever
CAM Shaft
CAM SW
Cover Size Sensor
Size Harness Assembly
Clamp
Main Frame Assembly
Right Side Cover
Feeder Assembly
Cassette Assembly
Left Side Cover
Screw (quantity 3)
Size Sensor Housing Assembly
(with 5-13)
Hardware Kit (Includes Screws)
Initial Issue
DocuPrint N2125
02/2000
5-17
Parts-list
PL 11.1
PL 11.2 500 Sheet Feeder (2 of 2)
Item
Part
Description
1
2
3
4
5
6
7
8
9
10
11
12
----22K55001
121K20151
----809E11630
120E16960
-------------------------
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
130E81970
162K47211
----------------600K79320
----------------------------------------------------------------160K52781
121K19010
------------600K79550
600K79640
600K79650
22K56900
108R00330
S
600K79660
Feeder Assembly (with 2-40)
Turn Roll Assembly (with 3)
Turn Clutch Assembly
Spring Extension
Spring Chute
No Paper Actuator
Actuator Support
Feeder Frame Assembly
Clamp
Left Latch Spring
Low Paper Actuator (P/O item 43)
Low Paper Support Actuator (P/O
item 43)
Low Paper Sensor
N/Sensor Harness Assembly
Front Chute Assembly
Turn Chute
Roll 7
Feeder Cover
Feeder Assembly (with 20-28)
Feed Shaft
Bearing
Nudger Support Assembly
Nudger Chute
Gear Clutch
O/W Clutch Assembly
Roll Assembly
Gear 25T
Gear 31T
Nudger Spring
Gear 4
Gear 2
Gear Cover
Bracket
Gear 3
OPT Gear
Feeder PWB
Feed Clutch Assembly
Bearing
N/Motor Harness Assembly
Socket
Feed Roll Kit (item 26- quantity 3)
Socket & Harness Kit (with 39, 40)
Actuator & Support Kit (with 11, 12)
Feeder Assembly 1 Kit (with 1-40)
Feed Roll Usage Kit (item 41quantity 2)
Hardware Kit (Includes Screw)
Initial Issue
DocuPrint N2125
02/2000
5-18
Parts-list
PL 11.2
PL 12.1 Envelope Feeder (1 of 2)
Item
Part
Description
1
-----
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
S
54E14452
----------------------------59E93940
31E93291
------------------------------------130K60390
--------600K79310
600K79660
Envelope Feeder Assembly (with 223)
Top Chute
Retard Spring
Retard Holder
Torque 29 Clutch Assembly
Retard Roll Assembly (with 7)
Retard Roll
Feeder Bearing
Pinch Spring
Exit Pinch Roll
Weight Arm
Weight Holder
Envelope Left Side Guide
Envelope Right Side Guide
Envelope Feeder Sub Assembly
Pinion Gear
Bottom Cover
Tray Extension
Envelope Pinch Roll
Sensor Harness Assembly
Exit Sensor Assembly
Weight Cover
Weight Plate
Retard Roll Kit Assembly
Hardware Kit (Includes Screw)
Initial Issue
DocuPrint N2125
02/2000
5-19
Parts-list
PL 12.1
PL 12.2 Envelope Feeder (2 of 2)
Item
Part
Description
1
-----
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
S
----7E27420
----7E36080
121K87180
----7E28780
121K87201
----121K87190
6E47120
121K87210
121K87220
----------------------------130E81970
------------------------------------600K79660
Envelope Feeder Sub Assembly
(with 2-31)
Gear Cover
Gear 29
Gear Drive 21
Gear 23
Torque 25 Clutch Assembly
Feeder Bearing
Idler 21 Gear
One Way 26 Clutch Assembly
Bearing Clutch Elec
Feed Clutch
Clutch Shaft 17
One Way Clutch Assembly
One Way Clutch Assembly
Transport Roll Assembly (with 16)
Transport Roll
Bottom Roll Assembly
Envelope Pinch Roll
Feed Belt
Main Chassis
No Paper Actuator
No Paper Sensor
Feed Roll Assembly 1 (with 24)
Feeder Roll
Feed Roll Assembly 2 (with 26)
Feeder Roll
Envelope Connector
Main Harness Assembly
Clutch Harness Assembly
Envelope PWB
No Paper Harness Assembly
Hardware Kit (Includes Screw)
Initial Issue
DocuPrint N2125
02/2000
5-20
Parts-list
PL 12.2
PL 13.1 Duplex (1 of 2)
Item
Part
Description
1
2
3
-------------
4
5
6
S
54K15061
--------600K79660
Duplex Assembly (with 2-6)
Turn Chute Assembly
Connector Chute Assembly
Connector
Upper Chute Assembly
Duplex Drive Cover
Lower Duplex Chute Assembly
Hardware Kit (Includes Screw)
Initial Issue
DocuPrint N2125
02/2000
5-21
Parts-list
PL 13.1
PL 13.2 Duplex (2 of 2)
Item
Part
Description
1
-----
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
S
59K12151
3E47580
----------------127K24800
423W15455
----------------130E81970
160K53051
----130K83310
----600K79660
Lower Duplex Chute Assembly
(with 2-18)
Duplex Roll Assembly
Duplex Stopper Belt
Duplex Gear 17/Pulley
Duplex Bearing
Duplex Gear 18
Duplex Gear 17/39
Motor Assembly
Synchronous Belt
Lower Duplex Chute
Duplex Latch
Duplex Latch Spring
Duplex Sensor Harness
Face Up Tray Sensor
Duplex PWB
Duplex Cover
Duplex Transport Sensor
Duplex Handle Label
Hardware Kit (Includes Screw)
Initial Issue
DocuPrint N2125
02/2000
5-22
Parts-list
PL 13.2
PL 14.1 Offset Catch Tray (1 of 2)
Item
1
2
3
4
5
6
7
8
9
10
S
Part
Description
----50K38631
----50E89160
12E09550
802E02773
802E02755
54K14842
--------600K79660
Offset Catch Tray Assembly (with 2-10)
Exit Tray Assembly
Tray Spring
Exit Tray
Weight Link
Rear Cover
OCT Cover
Inner Exit Chute Assembly
Hook Cover
Lower Cover
Hardware Kit (Includes Screw)
Initial Issue
DocuPrint N2125
02/2000
5-23
Parts-list
PL 14.1
PL 14.2 Offset Catch Tray (2 of 2)
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
S
Part
Description
54K14842
--------160K47332
----127K28640
--------------------------------121K20551
11E09450
----130K84220
120E17191
130E81970
--------------------------------------------54E14431
802K05770
--------130E81970
----------------------------600K79660
Inner Exit Chute Assembly (with 2-43)
OCT Harness Assembly (J21-P202)
PWB Holder
OCT PWB
Ground Plate
Drive Motor Assembly
Gear Exit 20
Bearing Exit
Gear 27
Gear 26
Gear 47W
Gear Exit
Static Eliminator
HSG Gear
Direction Solenoid
Solenoid Lever
Solenoid Pin
Exit Sensor Assembly
Stack Full Actuator
Stack Full Sensor
OCT Sensor Harness Assembly (J224-225, J226, J227, J228)
Offset Roll Assembly (with 23-26, 43)
Exit Roll Assembly
Exit Roll Pinch
Offset Bearing
OCT Guide
OCT Holder
Exit Shaft
Mid Roll Assembly
OCT Pinch Roll
Mid Pinch Spring
Inner Exit Chute
Offset Assembly (with 35-39)
Offset Motor Assembly
Offset Housing
OCT Home Sensor
Offset Lever
Core Gear
Ferrite Core
OCT Wire Assembly
Sensor Bracket
Saddle Edge
Exit Pinch Spring
Hardware Kit (Includes Screw)
Parts-list
PL 14.2
02/2000
5-24
Initial Issue
DocuPrint N2125