أطل - International Group For Modern Coating (Mido)

‫دهانات األخشاب‬
‫‪Unleash your Imagination‬‬
‫‪WOOD PAINTS‬‬
‫‪WOOD‬‬
‫‪Paints‬‬
‫دهانات‬
‫األخــشاب‬
‫أطلق لخيالك العنان‬
‫‪1‬‬
‫دهانات ميدو لألخشاب‬
‫المجموعة الدولية للدهانات الحديثة ( ميدو)‬
MIDO HEADQUARTERS :
New Borg El-Arab city,
2nd Industrial Zone
Alexandria, Egypt.
Tel.: +203 4593 555
Fax: +203 4592 655
contact@midoco.com
export@midoco.com
PHAROS FACTORY :
New Borg El-Arab city,
2nd Industrial Zone
Alexandria, Egypt.
Tel.: +203 4593 555
Fax: +203 4592 655
EURO FACTORY :
New Borg El-Arab city,
4th Industrial Zone
Alexandria, Egypt.
Tel.: +203 459 5981
Fax: +203 459 5980
ENDMOUN FACTORY :
New Borg El-Arab city,
4th Industrial Zone
Alexandria, Egypt.
Tel.: +203 459 5981
Fax: +203 459 5980
www.midoco.com
NEW PLAST FACTORY :
New Borg El-Arab city,
4th Industrial Zone
Alexandria, Egypt.
Tel.: +203 459 5981
Fax: +203 459 5980
ALEXANDRIA BRANCH:
314 El-Kodaa’ Buildings,
Smouha, Alex, Egypt.
Tel.: +203 421 0316 / 7
Fax: +203 421 0315
Contents
1
Mido Wood Paints
International Group of Modern Coatings (MIDO)
• Wood Stains03
• Wood Insulators07
• Wood Sealers11
• Wood Varnishes19
• Wood Fillers and Surfacers
33
• Wood Decorative Paints
39
• Wood Glue43
www.midoco.com
Mido Wood Paints
2
WOOD STAINS
Sofa Stain
5
SOFA STAIN
Description:
Sofa stain is a high quality stain, formulated from high-quality dyes which can be diluted with
water and thinner. It is very effective in coloring furniture and wood works as it emphasizes
the natural beauty of wood.
Technical data:
Color
20 colors
Raw Materials
organic dyes – special resins – solvents – additives.
Drying Time
Air temperature ( 20º C).
• Surface Drying: 2 – 3 minutes.
• Complete Drying: 5 minutes.
Mixing Ratio
5 – 10 ml Stain : 100 ml ( Thinner, Alcohol or water )
Application Method:
Dilute the stain with thinner, alcohol or water as following:
• 5 – 10 ml stain : 100 ml (Thinner, Alcohol or water).
• Spray Viscosity: 10 – 12 seconds using Ford Cup No. 4 at 25º C.
• Spray using Spray gun: Nozzle diameter (1.2 – 1.4 mm); air pressure (3 – 4 bar) or
using a piece of cotton.
• Number of Coats: 2 coats or depending on the desired color.
Surface Preparation:
• Ensure that the surface to be painted
is free from dust, grease and other
contaminations.
• For previously painted surfaces, all loose
paints must be thoroughly removed to
ensure the paint adhesion.
Recommended Uses:
Specially formulated to color wood
5
Mido Wood Paints
surfaces and furniture.
Shelf Life:
2 years from the date of production,
provided storing in proper conditions at 25º
C and 65% of relative humidity.
Packaging: 250 ml – 1Liter
International Group of Modern Coatings (MIDO)
WOOD INSULATORS
Sofa Insulator (Polyurethane)
9
SOFA
Insulator
(Polyurethane)
Description:
Sofa Polyurethane insulator (clear) is used to prepare wood surfaces before spraying
polyester paints. It is especially designed to insulate oils excreted by the wood pores.
Technical data:
Viscosity
12 seconds at 25º C by Ford Cup No. 4.
Color
Clear
Mixing Ratio by Volume
1 insulator : 1 Hardener.
Clotting Time
4 – 5 hours at 25º C.
Drying Time
Air temperature (25º C).
• Surface Drying: 20 – 30 minutes.
• Complete Drying: 2 hours.
Coverage Rate
9 – 12 m2 / kg depending on the surface and film thickness.
Application Method:
• Spray using Spray gun: Nozzle diameter (1.5 – 1.8 mm); air pressure (3 – 4 bar) or
using a piece of cotton.
• Surface can be painted with polyester paint after 2 – 3 hours of painting the insulator,
and the insulator can be sanded before repainting polyester paint.
• Insulator must be sanded in case of drying more than 16 hours.
9
Mido Wood Paints
Recommended Uses:
Specially formulated to paint wood which
is known to excrete different types of oils.
the hardener from the date of production,
provided storing in proper conditions at 25º
C and 65% of relative humidity.
Shelf Life:
2 years for the insulator and one year for
Packaging:
1 liter of Insulator – 1 liter of Hardener.
International Group of Modern Coatings (MIDO)
WOOD SEALERS
• Nitrocellulose Sealer
Vniwood Sealer
Modern Touch Sealer
Nova Sealer
13
14
15
17
• Polyester Sealer
Jet Sealer
• Polyurethane Sealer
2K Polyurethane Sealer
18
Vniwood Sealer
Description:
Vniwood Sealer is a high-build material to fill pores in wood surfaces. This product
is especially designed to prepare wood surfaces before using varnish and to produce
a smooth, hard, seal coat without any influence on natural wood grain. It boasts easy
sanding and superior adhesion without any effect on the wood color.
Technical data:
Color
Clear – dark.
Specific Gravity
1 ± 0.05 gm. /cm3.
Viscosity
32000 - 82000 centipoise / 25º C.
Drying Time
• Surface Dry: 8 minutes.
• Complete Dry: 1.5 hour.
Coverage Rate
6 – 8 m2.
Film Thickness
120 – 200 micron.
Dilution
ordinary Duco thinner
Application Method:
• Sand the surface well.
• Dilute sealer with ordinary Duco thinner till obtaining the desired viscosity.
• Apply using spray gun or a piece of cotton.
• Spray the first coat, and allow it to dry for about 5 minutes.
• Spray the second coat and allow it to dry well (35 – 45 minutes). Then, sand it with
sandpaper No. 320, to get a smooth coat ready for varnish application.
Shelf Life:
2 years from the date of production, provided storing in proper conditions at 25º C and
65% of relative humidity.
Packaging: 1 kg – 4 kg – 10 kg – 15 kg.
13 Mido Wood Paints
International Group of Modern Coatings (MIDO)
Modern Touch Sealer
Description:
Modern Touch Sealer is a high-build material formulated from nitrocellulose to fill pores in
wood surfaces. This product is especially designed to produces a smooth, hard, seal coat
as a foundation before using Duco varnish without any influence on natural wood grain. It
is characterized by high filling, easy sanding, and superior adhesion without any effect on
the wood color.
Technical data:
Color
Clear – dark
Specific Gravity
1 ± 0.05 gm./cm3.
Viscosity
80000 : 120000 centipoise / 25º C.
Drying Time
• Surface Dry: 8 minutes.
• Complete Dry: 1.5 hour.
Film Thickness
120 – 200 micron.
Coverage Rate
8 – 10 m2.
Dilution
Ordinary Duco thinner.
Application Method:
• Sand the surface well.
• Dilute sealer with ordinary Duco thinner till obtaining the desired viscosity.
• Apply using spray gun or a tpiece of cotton.
• Spray the first coat, and allow it to dry for about 5 minutes.
• Spray the second coat and allow it to dry well (35 – 45 minutes). Then, sand it with
sandpaper No. 320, to get a smooth coat ready for varnish application.
Shelf Life:
2 years from the date of production, provided storing in proper conditions at 25º C and
65% of relative humidity.
Packaging: 4.25 kg – 10 kg – 15 kg.
www.midoco.com
Mido Wood Paints 14
Nova Sealer
Description:
Nova Sealer is a high-build material formulated from nitrocellulose to fill pores in wood
surfaces. This product is especially designed to prepare the wood surfaces before using
Duco varnish, producing a smooth, hard, seal coat without any influence on natural wood
grain. It is characterized by easy sanding and superior adhesion without any effect on the
wood color.
Technical data:
Color
Clear – dark
Specific Gravity
1 ± 0.05 gm./cm3.
Viscosity
140000 - 180000 centipoise / 25º C.
Solid Content
58 ± 2 %
Film Thickness
120 – 200 micron.
Coverage Rate
5 – 6 m2.
Dilution
ordinary Duco thinner.
Drying Time
• Surface Dry: 8 minutes.
• Complete Dry: 1.5 hour.
Recommended Use:
Specially formulated to be used on all types of furniture to be sprayed with Duco varnish,
and can be used on all types of veneer as a surfacer to seal pores.
Shelf Life:
2 years from the date of production, provided storing in proper conditions at 25º C and
65% of relative humidity.
Packaging: 4.25 kg – 10 kg – 15 kg.
15 Mido Wood Paints
Application Method:
• Sand the surface well.
• Dilute sealer with ordinary Duco thinner till obtaining the desired viscosity.
• Spray the first coat, and allow it to dry for about 10 minutes.
• Spray the second coat and allow it to dry well. Then, sand it with sandpaper No. 320.
• Spray the last coat, so the wood work becomes ready for varnish application.
International Group of Modern Coatings (MIDO)
Jet Sealer
Description:
Jet Sealer is a high-build clear material formulated from polyester to fill pores in wood
surfaces. This product produces a smooth, hard, seal coat as a foundation before using
Duco varnish without any influence on natural wood grain. It boasts maximum filling, easy
sanding and superior adhesion.
Technical data:
Color
Clear
Specific Gravity
1 ± 0.05 gm./cm3.
Viscosity
80000 - 120000 centipoise / 25º C.
Film Thickness
120 – 200 micron.
Dilution
Polyester thinner (25 – 30 %).
Drying Time
• Surface Dry: 2 hours.
• Complete Dry: 9 hours.
Recommended Use:
Specially formulated to be used on all
types of furniture to be sprayed with Duco
varnish, and can be used on all types of
veneer as a surfacer to seal pores.
Shelf Life:
2 years from the date of production,
provided storing in proper conditions at
25º C and 65% of relative humidity.
17 Mido Wood Paints
Packaging:
Application Method:
• 1 kg Sealer – 18 gm.
auxiliary – 18 gm. Hardener.
• Add 2 – 3 % auxiliary agent to the sealer, and then stir well. Add Hardener at 2 – 3 %
• 2 kg Sealer – 52 gm.
auxiliary – 52 gm. Hardener.
• Dilute polyester sealer with special thinner (25 – 30 %), taking into account that run time
• 10 kg Sealer – 180 gm.
auxiliary – 180 gm. Hardener.
• Spray the first coat, allow it to dry, and sand it.
and then stir well again.
is 20 – 30 minutes from the beginning of adding the hardener.
• Spray the second coat if necessary.
International Group of Modern Coatings (MIDO)
Polyurethane Sealer 2K
Description:
Polyurethane Sealer 2K is a high-build clear material formulated from polyurethane two
components to fill pores in wood surfaces. This product produces a smooth, hard, seal
coat as a foundation before using Duco varnish without any influence on natural wood
grain. It boasts water, scrubbing and marine condition resistance, easy sanding, and
superior adhesion without any effect on the wood color.
Technical data:
Color
clear
Finish
smooth and soft
Solid Content by Volume
40 ± 2 %.
Specific Viscosity
0.99 kg/liter (mixed) ± 0.5 kg/liter
Viscosity
120 seconds / Ford Cup # 4 / 25º C.
Coverage Rate
10 m2 /liter.
Film Thickness
40 micron
Respraying Time
5 minutes.
Dilution
polyurethane thinner 20 – 25 % (depending on the
application method).
Mixing Ratio
2 polyurethane sealer : 1 Hardener : 20 – 25 % Thinner.
Drying Time
• Surface Dry: 2 – 3 hours.
• Complete Dry to sanding: 5 - 6 hours.
Shelf Life:
18 months from the date of production,
provided storing in proper conditions at 25º
C and 65% of relative humidity.
Packaging: 5 kg – 20 kg
www.midoco.com
Recommended Use:
Specially formulated to be used on wood
surfaces for all purposes, as it boasts high
filling and easy sanding.
Application Method:
• First, sand the surface well.
• Mix the sealer with hardener at a rate of 2 for sealer : 1 for hardener
• Dilute it with Duco thinner at a rate of 20 – 25 %
• Spray 2 coats.
• Sand the surface with sandpaper No. 320.
Mido Wood Paints 18
WOOD VARNISHES
• Alkyd Varnish
Clear Coat Varnish Clear Coat Varnish (El Shagara) Lux Varnish
Mido Star Lux Varnish 21
22
23
24
• Nitrocellulose Varnish (Duco)
Vniwood Varnish
Jet Varnish
Soft Matt Varnish
Soft Touch Varnish
Mido DucoVarnish
25
26
27
28
29
• Polyurethane Varnish
Polyurethane Varnish 1:1
Polyurethane Varnish 2:1
31
32
Clear Coat Varnish
Description:
It is a modified, clear alkyd varnish. It boasts superior gloss, high hardness, adhesion, and
supreme resistance to weather conditionsand home chemicals (alcohol, grease, and oils
….etc). It is used to paint wood works, including kitchens, furniture and boats.
Technical data:
Application Method:
• Apply Vniwood Sealer. After drying, sand the sealer with Duco sandpaper P 320.
• Repaint Vniwood Sealer multiple times to get a polished surface.
• Dilute the varnish with mineral or vegetarian oil by 5 – 10 % in case of using the brush
or benzene in case of spraying with the gun.
• It can be repainted after 16 – 18 hours of painting the first coat.
Finish
high gloss
Viscosity
5 – 5.5 minutes / Ford Cup # 4 / 25º C.
Density
0.91 ± 0.02 %.
Gloss
90 degree.
Drying Time
50 – 60 minutes at 25º C.
Repainting Time
after 16 – 18 hours of painting the first coat.
Dilution
mineral or vegetarian oil – benzene.
Recommended Use:
Specially formulated to be used in painting
wood works, including kitchens, furniture
and boats.
Shelf Life:
2 years from the date of production, provided
storing in proper conditions at 25ºC and 65%
of relative humidity.
Packaging: 1 liter.
21 Mido Wood Paints
International Group of Modern Coatings (MIDO)
Clear Coat Varnish
(El Shagara)
Description:
It is a polyurethane varnish, used to paint wood works, including kitchens, furniture and
boats. It boasts superior gloss, high hardness, adhesion, and supreme resistance to home
chemicals (alcohol, grease, and oils ….etc).
Technical data:
Application Method:
• Apply Vniwood Sealer. After drying, sand the sealer with Duco sandpaper P320.
• Repaint Vniwood Sealer multiple times to get a polished surface.
• Dilute the varnish with mineral or vegetarian oil by 5 – 10 % in case of using the brush
or benzene in case of spraying with the gun.
• Clear Coat varnish (El Shagara) can be repainted after 16 –18 hours of painting the first
coat.
www.midoco.com
Finish
clear coat - high gloss
Viscosity
5 – 5.5 minutes / Ford Cup #4 / 25º C
Density
0.91 ± 0.02 %.
Gloss
90 degree.
Drying Time
50 – 60 minutes at 25º C.
Repainting Time
after 16 – 18 hours of painting the first coat.
Dilution
mineral or vegetarian oil – benzene
Recommended Use:
Specially formulated to be used in painting
wood works, including kitchens, furniture
and boats.
Shelf Life:
2 years from the date of production, provided
storing in proper conditions at 25ºC and 65%
of relative humidity.
Packaging: 925 gm. – 3 kg.
Mido Wood Paints 22
Lux Varnish
Description:
Lux Varnish is a modified, clear alkyd varnish. It is used to paint wood works, including
kitchens, furniture and boats. It boasts superior gloss, high hardness, adhesion, and
supreme resistance to home chemicals (alcohol, grease, and oils ….etc) and weather
conditions.
Technical data:
Application Method:
• Apply Vniwood Sealer. After drying, sand the sealer with Duco sandpaper P320.
• Repaint Vniwood Sealer multiple times to get a polished surface.
• Dilute the varnish with mineral or vegetarian oil by 5 – 10 % in case of using the brush
or benzene in case of spraying with the gun.
• Lux varnish can be repainted after 16 – 18 hours of painting the first coat.
Finish
high gloss.
Viscosity
4 – 4.5 minutes / Ford Cup # 4 / 25º C.
Density
0.91 ± 0.02 %.
Gloss
at least 85 degree.
Dilution
mineral or vegetarian oil – benzene
Drying Time
40 – 60 minutes at 25º C.
Repainting Time
after 16 – 18 hours of painting the first coat.
Recommended Use:
Specially formulated to be used in painting wood works, including kitchens,
furniture and boats.
Shelf Life:
2 years from the date of production, provided storing in proper conditions at 25º C and
65% of relative humidity.
Packaging: 925 gm. – 3 kg.
23 Mido Wood Paints
International Group of Modern Coatings (MIDO)
Mido Star Lux Varnish
Description:
Mido Star Lux Varnish is an economical, clear alkyd varnish. It is used to paint wood works,
including kitchens, furniture and boats. It boasts superior gloss, fast drying, excellent
hardness, easy application and maximum resistance to weather conditions.
Technical data:
Application Method:
• Apply Vniwood Sealer. After drying, sand the sealer with Duco sandpaper P320.
• Repaint Vniwood Sealer multiple times to get a polished surface.
• Dilute the varnish with mineral or vegetarian oil by 15 – 20 % in case of using the brush
or benzene in case of spraying with the gun.
• Mido Star Lux varnish can be repainted after 16 – 18 hours of painting the first coat.
www.midoco.com
Finish
high gloss
Viscosity
6500 – 7000 centipoise.
Density
0.88 ± 0.02 %.
Gloss
at least 85 degree
Dilution
mineral or vegetarian oil – benzene.
Drying Time
• Surface Drying: 100 – 120 minutes at 25º C.
• Complete Drying: 3 – 4 hours at 25º C.
Repainting Time
after 16 – 18 hours of painting the first coat.
Recommended Use:
Specially formulated to be used in painting wood works, including kitchens,
furniture and boats.
Shelf Life:
2 years from the date of production, provided storing in proper conditions at 25º C and
65% of relative humidity.
Packaging: 800 gm. – 3 kg.
Mido Wood Paints 24
Vniwood Varnish
Description:
Vniwood Varnish is a high-quality Nitrocellulose varnish, based on specially-formulated
alkyd resins. This product boasts high transparence, excellent gloss, fast drying, superior
hardness and scratch resistance.
Technical data:
Application Method:
• Sand the surface well.
• Spray 2 coats of Vniwood Sealer, and then one coat of Jet Sealer. Sand the surface
well after complete drying.
• Apply Sofa Stain.
• Dilute Vniwood Varnish with a suitable Duco thinner to get suitable spraying viscosity.
• Apply it using spraying gun diameter nozzle (1.5 – 1.8) mm.
• Spray 2 coats of the varnish, leaving 5 – 10 minutes flash-off time between coats.
25 Mido Wood Paints
Density
1 ± 0.1 gm. / cm3.
Viscosity
2000 – 3000 centipoise / 25º C.
Drying Time
• Surface Drying: 15 minutes at 25º C.
• Complete Drying: 30 minutes at 25º C.
Gloss
glossy, semi-glossy and matt.
Thinner
Proper Duco Thinner.
Finish
Clear
Recommended Use:
Specially formulated to be used in painting wood works, including kitchens,
furniture and boats.
Shelf Life:
2 years from the date of production, provided storing in proper conditions at 25º C and
65% of relative humidity.
Packaging: 1050 gm. – 36 kg.
International Group of Modern Coatings (MIDO)
Jet Varnish
Description:
Jet Varnish is a high-quality Nitrocellulose varnish, based on specially-formulated alkyd
resins. This product boasts high transparence, excellent gloss, fast drying, superior
hardness and scratch resistance.
Technical data:
Application Method:
• Sand the surface well.
• Spray 2 coats of Vniwood Sealer, and then one coat of Jet Sealer. Sand the surface
well after complete drying.
• Apply Sofa Stain.
• Dilute Jet Varnish with a suitable Duco thinner to get suitable spraying viscosity.
• Apply it using spraying gun diameter nozzle (1.5 – 1.8) mm.
• Spray 2 coats of the varnish, leaving 5 – 10 minutes flash-off time between coats.
www.midoco.com
Density
1 ± 0.1 gm. / cm3.
Viscosity
2000 – 3000 centipoise / 25º C.
Drying Time
• Surface Drying: 15 minutes at 25º C.
• Complete Drying: 30 minutes at 25º C.
Gloss
glossy, semi-glossy and matt.
Thinner
Proper Duco Thinner.
Color
Clear
Recommended Use:
Specially formulated to be used in painting furniture, kitchens, and other wood works.
Shelf Life:
2 years from the date of production, provided storing in proper conditions at 25º C and
65% of relative humidity.
Packaging: 1/2 kg – 4 kg – 15 kg.
Mido Wood Paints 26
Soft Matt Varnish
Description:
Soft Matt Varnish is a high-quality matt nitrocellulose varnish, based on specially-formulated
alkyd resins with special additives to give attractive matt finish, smooth touch and high
resistance to friction and scrubbing.
Technical data:
Application Method:
• Using spray gun nozzle diameter 1.5 – 1.8.
• Air pressure: 3 – 4 bar.
• Spray viscosity: 18 – 20 seconds using Ford Cup No. 4 at 25º C.
• Coats: 2 coats.
27 Mido Wood Paints
Finish
Clear
Specific Gravity
0.92 kg /liter.
Viscosity
4 minutes at 25º C.
Gloss
matt (5%).
Drying Time
• Surface Drying: 15 minutes at 25º C.
• Complete Drying: 30 minutes at 25º C.
Repainting Time
5 minutes.
Recommended Use:
Specially formulated to be used in painting wood and furniture to give attractive matt finish,
smooth touch and high resistance to friction and scrubbing.
Shelf Life:
2 years from the date of production, provided storing in proper conditions at 25º C and
65% of relative humidity.
Packaging:
950 gm. – 3.5 kg.
International Group of Modern Coatings (MIDO)
Soft Touch Varnish
Description:
Soft Touch Varnish is a high-quality semi-gloss nitrocellulose varnish, based on speciallyformulated alkyd resins with special additives to give attractive semi-gloss finish, smooth
touch and high resistance to friction and scrubbing.
Technical data:
Application Method:
• Using spray gun nozzle diameter 1.5 – 1.8.
• Air pressure: 3 – 4 bar.
• Spray viscosity: 18 – 20 seconds using Ford Cup No. 4 at 25º C.
• Coats: 2 coats.
www.midoco.com
Finish
Clear
Solid Content by Weight
37 ±1 %.
Specific Gravity
0.9 kg /liter.
Viscosity
4 minutes at 25º C.
Gloss
semi-gloss (25 – 30%).
Drying Time
• Surface Drying: 15 minutes at 25º C.
• Complete Drying: 30 minutes at 25º C.
Repainting Time
15 minutes.
Recommended Use:
Specially formulated to be used in painting wood and furniture to give attractive semiglossy finish, smooth touch and high resistance to friction and scrubbing.
Shelf Life:
2 years from the date of production, provided storing in proper conditions at 25º C and
65% of relative humidity.
Packaging:
950 gm. – 3.5 kg.
Mido Wood Paints 28
Mido Duco Varnish
Description:
Mido Duco is a high-quality Nitrocellulose varnish, based on specially-formulated alkyd
resins. This product boasts high transparence, excellent gloss, fast drying, superior
hardness and scratch resistance.
Technical data:
Application Method:
• Sand the surface well.
• Spray 2 coats of Vniwood Sealer, and then one coat of Jet Sealer. Sand the surface
well after complete drying.
• Apply Sofa Stain.
• Dilute Mido Duco Varnish with a suitable Duco thinner to get suitable spraying viscosity.
• Apply it using spraying gun diameter nozzle (1.5 – 1.8) mm.
• Spray 2 coats of the varnish, leaving 5 – 10 minutes flash-off time between coats.
29 Mido Wood Paints
Finish
Clear
Color
all colors.
Specific Gravity
white 1 – colors 0.96.
Viscosity
2500 – 3000 centipoise / 25º C.
Drying Time
• Surface Drying: 15 minutes at 25º C.
• Complete Drying: 30 minutes at 25º C.
Repainting Time
5 minutes
Recommended Use:
Specially formulated to be used in painting furniture, kitchens, and other wood works.
Shelf Life:
2 years from the date of production, provided storing in proper conditions at 25º C and
65% of relative humidity.
Packaging:
1 kg – 3 kg.
International Group of Modern Coatings (MIDO)
Polyurethane Varnish 1:1
Description:
Polyurethane Varnish 1:1 is a high-quality polyurethane varnish (gloss - semi-gloss – matt),
based on two components of high-quality resins and special additives to give maximum
performance and can be sanded after 24 hours. It boasts smooth touch, high hardness,
flexibility and resistance to weathering and and scrubbing.
Technical data:
Raw Materials
resins – solvents – special additives.
Drying Time
(at a film thickness of 50 - 60 micron / air drying 25º C.)
• Surface Drying: 2 hours at 25º C.
• Complete Drying: 4 – 6 hours at 25º C.
Film Thickness
50 – 60 micron per coat.
Coverage Rate
6 – 8 m2 / liter.
Mixing Ratio
1 polyurethane varnish : 1 polyurethane hardener
+ 25 % polyurethane thinner.
Available time for repainting
after mixing
3 - 4 hours at 25º C.
Flash-off time
5 minutes between coats.
Application Method:
• The surface must be clean and free of dust, grease and oil.
• Sand the surface well using sandpaper No. 320.
• Spray new surfaces with Polyester Sealer or Polyurethane Sealer, and sand it with
sandpaper No. 320 to get a smooth surface. Then, spray Polyurethane Varnish.
• Sand old surfaces with sandpaper No. 1000, and then spray the varnish.
• Using spray gun nozzle diameter (1.5 – 1.8 mm), and air pressure (3 – 4 bar).
• Spray viscosity: 18 – 20 seconds at 25º C.
• Number of Coats: 2 coats.
• Polish the surface after 24 hours to get smooth and attractive surface.
31 Mido Wood Paints
Recommended Use:
Specially formulated to be used in painting furniture, kitchens and other wood works,
whether interior or exterior.
Shelf Life:
2 years from the date of production, provided storing in proper conditions at 25º C and
65% of relative humidity.
Packaging:
850 gm. – 4.5 kg.
International Group of Modern Coatings (MIDO)
Polyurethane Varnish 2:1
Description:
Polyurethane Varnish 2:1 is a high-quality polyurethane varnish (gloss - semi-gloss – matt),
based on two components of high-quality resins and special additives to give maximum
performance and can be sanded after 24 hours. It boasts smooth touch, high hardness,
flexibility and resistance to weathering and scrubbing.
Technical data:
Raw Materials
resins – solvents – special additives.
Mixing Ratio
2 polyurethane varnish : 1 polyurethane hardener + 25 %
polyurethane thinner.
Available time for
repainting after mixing
3 - 4 hours at 25º C.
Drying Time
(at a film thickness of 50 - 60 micron / air drying 25 º C.)
• Surface Drying: 1 hour at 25º C.
• Complete Drying: 24 hours at 25º C.
Film Thickness
55 – 70 micron per coat.
Coverage Rate
6 – 8 m2 / liter.
Application Method:
• The surface must be clean and free of dust, grease and oil.
• Sand the surface well using sandpaper No. 320.
• Spray new surfaces with Euro Ester Sealer, and sand it with sandpaper No. 320 to get a
smooth surface. Then, spray Polyurethane Varnish.
• Sand old surfaces with sandpaper No. 1000, and then spray the varnish.
www.midoco.com
Recommended Use:
Specially formulated to be used in painting
furniture, kitchens and other wood works,
whether interior or exterior.
Shelf Life:
2 years from the date of production,
provided storing in proper conditions at
25º C and 65% of relative humidity.
Packaging: 800 gm. – 4 kg.
Application:
• Using spray gun nozzle diameter:
1.5 – 1.8 mm.
• Air pressure: 3 – 4 bar.
• Spray viscosity: 18 – 20 seconds at 25º
C.
• Number of coats: 2 coats.
• Flash-off time: 5 minutes between coats.
• Polish the surface after 24 hours to get
smooth and attractive surface.
Mido Wood Paints 32
WOOD FILLERS & SURFACERS
Jet Filler 1k
35
Jet Surfacer
36
Polyurethane Surfacer
37
Jet Filler 1K
Description:
Jet Filler 1K is a one-component fillerused to paint car panels. It is also used as a foundation
on wood surfaces. It boasts maximum filling of wood pores as well as fast drying.
Technical data:
Finish
Filler
Colors
all colors
Specific Gravity
1.4 gm. / cm3.
Viscosity
25.000 centipoise at 25º C.
Drying Time:
• Surface Drying: 15 minutes.
• Complete Drying: 2 hours.
Flash-off Time
15 minutes
Application Method:
• Using spray gun nozzle diameter: 1.8 – 2 mm.
• Spraying Pressure: 3 – 4 bar.
• Spraying viscosity: 30 – 35 seconds using Ford Cup at 25º C.
• No. of coats: 2 – 3 coats.
Recommended Use:
Specially formulated to be used in repainting modern cars, metal surfaces, and furniture.
Shelf Life:
2 years from the date of production, provided storing in proper conditions at 25º C and
65% of relative humidity.
Packaging: 1500 gm.
35 Mido Wood Paints
International Group of Modern Coatings (MIDO)
Jet Surfacer
Description:
Jet Surfaceris specially formulated from nitrocellulose and resins to be used directly
before the top coat to get smooth and soft surface. This product boasts easy sanding
and excelling filling properties for wood and metal to give smooth surface after sanding,
avoiding matt touch in the top coat.
Technical data:
Finish
Matt
Colors
All basic colors
Specific Gravity
1.4 gm. /cm3
Viscosity
25.000 centipoise at 25º C
Drying Time
• Surface Drying: 15 minutes.
• Complete Drying: 30 minutes.
Flash-off time
15 minutes.
Application Method:
• Use the spray gun (Nozzle: 1.8 – 2 mm / air pressure: 3 – 4 bar) in application after diluting
paint with proper Nitrocellulose thinner till attaining the desired viscosity.
Recommended Use:
Specially formulated to be used in painting wood and metal works after putty to give
smooth surface.
Shelf Life:
2 years from the date of production, provided storing in proper conditions at 25º C and
65% of relative humidity.
Packaging: 1350 gm. – 5 kg.
www.midoco.com
Mido Wood Paints 36
Polyurethane Surfacer
Description:
Polyurethane Surfacer 2K with hardeneris specially formulated to be used directly before
the top coat to give smooth and soft surface. This product boasts excelling filling properties
for wood to give smooth surface after sanding, avoiding matt touch in the top coat. The
surface becomes ready for painting 2K products.
Technical data:
Finish
Matt
Colors
All basic colors.
Specific Gravity
1.4 gm. /cm3.
Viscosity
15.000 centipoise at 25º C.
Drying Time
• Surface Drying: 2 hours.
• Complete Drying: 4 – 6 hours.
Flash-off time
5 minutes.
Application Method:
• Application tools: Use the spray gun (Nozzle: 1.8 – 2 mm / air pressure: 3 – 4 bar) in
application after mixingsurface with hardener at rate 2:1 and then diluting withNitrocellulose
thinner till attaining the desired viscosity.
37 Mido Wood Paints
Recommended Use:
Specially formulated to be used in painting wood after putty to get smooth surface.
Shelf Life:
1 year from the date of production, provided storing in proper conditions at 25º C and
65% of relative humidity.
Packaging: 1350 gm. – 5 kg.
International Group of Modern Coatings (MIDO)
WOOD DECORATIVE PAINTS
Hammer Finish – Atlanta 2000 Crackle Paint 41
42
Hammer Finish Atlanta 2000
Description:
Hammer Finish Atlanta 2000 is high gloss enamel, specially formulated from alkyd resin and aluminum
paste with high-quality additives,featuring an excellent hammered pattern.
It boasts fast drying, excellent mechanical properties and supreme resistance to weathering without
any impact on paint finish.
Technical data:
Color
Available in all colors except white.
Density
1± 0.1 gm. / cm3
Dilution
25 – 30 % (using good thinner).
Drying Time
• Surface Drying: 20 – 25 minutes.
• Complete Drying: 2 – 3 hours.
Coverage Rate
8 – 10 cm3 / kg.
Gloss
85 ± 5 at 60O.
Application Method:
• Sand the surface well.
• Ensure that the surface to be painted is free from dust, grease and other contaminations.
41 Mido Wood Paints
Recommended Use:
It's an ideal paint for tools, machinery, and other industrial uses.
Shelf Life:
12 months from the date of production, provided storing in proper conditions
at 25º C and 65% of relative humidity.
Packaging:
1 kg – 4 kg – 15 kg.
International Group of Modern Coatings (MIDO)
Crackle Paint
Description:
Crackle is a decorative nitrocellulose matt paint, especially formulated from high-quality resins and
additives to give special effects similar to crocodile leather in its appearance.
Application Method:
• To get the best crackle effect, you should follow these instruction:
• Spray duco paint (Midoduco – Jet) according to the required color.
• Dilute the Crackle paint with proper duco thinner: 20 – 25%.
• Spraying distance: 30 – 40 cm.
• Pressure: 1.5 – 2 bar.
• Nozzle diameter: 1.8 – 2 mm.
• In case of distance less than 30 cm, you can obtain wide crackle effect.
• In case of distance more than 40 cm, you can obtain narrow crackle effect.
Technical data:
Color
12 colors
Viscosity
1500 – 2000 centipoise.
Dilution
Using proper nitrocellulose thinner.
Drying Time
10 – 15 minutes.
Recommended Use:
Used in painting all wood works.
Shelf Life:
12 months from the date of production, provided storing in proper conditions
at 25º C and 65% of relative humidity.
Packaging:
1 kg – 4 kg.
www.midoco.com
Mido Wood Paints 42
WOOD GLUE
Jet (Clear Glue) Jet (White Glue)
45
46
Jet (Clear Glue)
Description:
It's clear glue, manufactured from high quality materials and characterized by its perfect
adhesion. It is suitable for adhering wood, papers, and cartons. It is characterized by fast
dry.
Technical data:
Finish
Clear
Drying Time
• Surface Dry: 10 – 15 min.
• Completely Dry: 60 min.
Recommended Use:
It is suitable for adhering wood, papers, and
cartons.
Surface Preparation:
Surface should be clean and free of dust,
grease, and oil.
Shelf Life:
1 year from the date of production in
the original, tightly-sealed package.
provided storing in proper conditions at 25º
C and 65% of relative humidity.
Packaging: 900 gm.
Application Method:
• Surface should be clean and free of dust, grease, and oil.
• Dilute by water till getting better consistence.
• The diluted glue must be used completely.
• After diluting the glue with water, put a suitable amount on the surface and press well.
45 Mido Wood Paints
International Group of Modern Coatings (MIDO)
Jet (White Glue)
Description:
It's white glue, manufactured from high quality materials and characterized by its perfect
adhesion. It is suitable for adhering wood, papers, and cartons. It is characterized by fast
dry.
Technical data:
Finish
White
Drying Time
• Surface Dry: 10 – 15 min.
• Completely Dry: 60 min.
Recommended Use:
It is suitable for adhering wood, papers, and
cartons.
Surface Preparation:
Surface should be clean and free of dust,
grease, and oil.
Shelf Life:
1 year from the date of production in
the original, tightly-sealed package.
provided storing in proper conditions at 25º
C and 65% of relative humidity.
Packaging: 900 gm.
Application Method:
• Surface should be clean and free of dust, grease, and oil.
• Dilute by water till getting better consistence.
• The diluted glue must be used completely.
• After diluting the glue with water, put a suitable amount on the surface and press well.
www.midoco.com
Mido Wood Paints 46