DOWNLOAD the catalogue of the association as a PDF file

CATALOGUE OF MEMBERS
www.medtechnik.cz
Organisation:
ASSOCIATION OF MANUFACTURERS
AND SUPPLIERS OF MEDICAL DEVICES
Vinařská 6
603 00 Brno
CZECH REPUBLIC
tel./fax: +420 543 243 032
e-mail: asociace@medtechnik.cz
Introduction
This catalogue of manufacturers and exporters of medical devices contains information of companies associated in the Association of
Manufacturers and Suppliers of Medical Devices and their product range.
A production of medical devices has a long tradition in the Czech Republic. Since 20th of the 20th century surgical instruments,
x-rays, and other orthopaedic and rehabilitation devices have been manufactured in our country.
A qualitative development started in 50th of the last century with electronics development. A production of ECG machines, sterilizers,
ventilators, anaesthetic devices, laboratory devices and other products has started. As early as in those years our industry reached
outstanding successes in the world. In 1958 we were awarded a gold medal for a cardiology defibrillator at the world exhibition in
Brussels. Another world success was reached with a polarograph invention for which professor Heyrovsky was awarded the Nobel Prize.
Engineering and electrical products have gradually been supplemented with products from plastics. Professor Wichterle has registered
an invention of hydro gel contact lenses. Industry has started to produce disposable syringes and needles.
Health care area continued its development and started to supply complicated technical systems such as central sterilizers, dental
units, x-ray units, cobalt irradiator, lithotriptor etc.
In 90th of the last century a transformation of the industry into market economy conditions took place in the Czech Republic. Today,
the sector of medical devices represents a wide complex of various entrepreneurial subjects comprising of production, designer,
business, and distribution companies. The Czech medical devices industry meets majority of key needs of health care facilities.
Companies are able to supply products from surgical instruments, various types of hospital beds, sterilizers including central sterilisation,
ventilators, anaesthetic devices, x-rays including panoramic x-rays, dental technique, ambulances, mobile hospitals, orthopaedic and
rehabilitation devices, kitchen and laundry equipment, technical gases and their distribution, and other assortment. The medical
devices industry in the Czech Republic is able to deliver complex supplies from a design to the equipment with technology products.
Our goal is to implement best solution from the viewpoint of technical excellence, quality and cost effectiveness. A complex program
meeting individual requirements of our customers from counselling , training to servicing is guaranteed.
All our companies use quality assurance system ISO. Their products have CE mark.
The aim of the catalogue is to inform health care workers of the possible product range for equipping their workplaces. More detailed
information of individual companies together with prices of products can be obtained on given contact addresses.
The catalogue of the Association of Manufacturers and Suppliers of Medical Devices can be found on the web pages www.medtechnik.cz.
All the members of the Association have a link on their company web pages there so that detailed information of individual companies
and their product ranges could be obtained this way too.
JUDr. Jaroslav Kopeček
Chairman of the Association of Manufacturers
and Suppliers of Medical Devices
List of companies
A
L
ABNER a.s. ....................................................................................................... 09
AKC konstrukce, s.r.o. .................................................................................... 10
ALPA, a.s. ........................................................................................................... 11
APOS-AUTO, s.r.o. .......................................................................................... 12
ARIES, a.s ........................................................................................................... 13
AUDY s.r.o. ........................................................................................................ 14
LabMediaServis, s.r.o. ................................................................................... 57
Lasak, spol. s r.o. ........................................................................................... 58
Linet spol. s r.o. ............................................................................................... 59
B
BEZNOSKA s.r.o. .............................................................................................. 15
Biomag CZ ........................................................................................................ 16
BIONIK Stapro Group s.r.o. ......................................................................... 17
BIOPHYS, spol. s r.o. ....................................................................................... 18
BLOCK a.s. ......................................................................................................... 19
BMT Medical Technology s.r.o. .................................................................... 20
BOCHEMIE a.s. ................................................................................................. 21
BORCAD cz s.r.o. ............................................................................................ 22
C
CLINITEX CZ s.r.o. ............................................................................................. 23
Codaco Electronic s.r.o. ................................................................................. 24
CompuGroup Medical Česká republika s.r.o. ............................................ 25
D
Daniševský, spol. s r.o. ................................................................................... 26
DELONG INSTRUMENTS a.s. ....................................................................... 27
DESSTER s.r.o. ................................................................................................. 28
DIPLOMAT DENTAL s.r.o. ............................................................................. 29
DN FORMED Brno s.r.o. ............................................................................... 30
DOMKAT, s.r.o. ................................................................................................. 31
M
Martek Medical a.s., ....................................................................................... 60
MEDETRON s.r.o. .............................................................................................. 61
MEDIATRADE s.r.o. ......................................................................................... 62
MedFinance Megellan, s.r.o. ......................................................................... 63
Medical Fair Brno, , Rehaprotex ............................................................. 64
MEDICAL TECHNOLOGIES CZ a.s. .............................................................. 65
MEDILA s.r.o. ................................................................................................... 66
MEDIN, a.s. ...................................................................................................... 67
MEDIPO - ZT, s.r.o. ....................................................................................... 68
MEDIPROGRESS, spol. s r.o. ....................................................................... 69
MEDISET-CHIRONAX s.r.o. ........................................................................... 70
MEDKONSULT, s.r.o. ........................................................................................ 71
Merci, s.r.o. ....................................................................................................... 72
Miele, spol. s r.o. ........................................................................................... 73
MORAMEDICA SE .......................................................................................... 74
MTE spol. s r.o. ............................................................................................... 75
M.T.Z. s.r.o. ........................................................................................................ 76
MZ Liberec, a.s. ................................................................................................. 77
N
NanoTrade s.r.o. ................................................................................................ 78
O
ORTEX spol. s r.o. ........................................................................................... 79
E
P
EGO Zlín, spol. s r.o. ........................................................................................ 32
EKOVUK MEDI, s.r.o. ...................................................................................... 33
EKOM spol. s r.o. ............................................................................................ 34
ELLA-CS, s.r.o. .................................................................................................. 35
EMBITRON s.r.o. .............................................................................................. 36
eNZi.cz s.r.o. ..................................................................................................... 37
ERGON a.s. ....................................................................................................... 38
ERILENS s.r.o. ................................................................................................ 39
Parabel s.r.o. ..................................................................................................... 80
PATRON Bohemia a.s. .................................................................................... 81
Paultech s.r.o. .................................................................................................... 82
PD clean construction, s.r.o. .......................................................................... 83
Pharmdata s.r.o. ............................................................................................... 84
PROFIL NÁBYTEK, a.s. ..................................................................................... 85
ProSpon spol. s r.o. ......................................................................................... 86
PULSKLIMA spol. s r.o. .................................................................................... 87
PURO-KLIMA, a.s. ............................................................................................ 88
F
FAVEA Europe, s.r.o. ........................................................................................ 40
FOMA BOHEMIA spol. s r.o. .......................................................................... 41
G
R
RADIX CZ, s.r.o. ............................................................................................... 89
ROYAX, s.r.o. .................................................................................................... 90
GEA Heat Exchangers a.s. ............................................................................ 42
S
CH
SIAD Czech spol. s r.o. .................................................................................. 91
Sicar spol. s r.o. ............................................................................................... 92
SIVAK medical technology s.r.o. .................................................................. 93
Speciální Medicínská Technologie, s.r.o. .................................................. 94
S&T Plus s.r.o ................................................................................................... 95
STROJÍRENSKÝ ZKUŠEBNÍ ÚSTAV, s. p. ................................................... 96
Synthesia, a.s. ................................................................................................. 97
CHEIRÓN a.s. .................................................................................................... 43
CHEMCOMEX Praha, a.s. .............................................................................. 44
Chirana Medical a.s. ...................................................................................... 45
CHIRASTAR KDT, s.r.o. ................................................................................... 46
CHIRMAX s.r.o. ............................................................................................... 47
CHIRONAX-DIZ spol. s r.o. ........................................................................... 48
I
Ing. Jan Turek ................................................................................................... 49
ING corporation, spol. s r.o. ........................................................................ 50
INPARTNERS GROUP .................................................................................... 51
J
JIVA - Jirák, spol. s r.o. ................................................................................ 52
K
Klaro, spol. s r.o. .............................................................................................. 53
Klášterní officína ........................................................................................... 54
Komora zubních techniků ČR .................................................................... 55
KOVONAX spol. s r.o. ..................................................................................... 56
T
Trystom, spol. s r.o. ......................................................................................... 98
TSE spol. s r.o. .................................................................................................. 99
Textilní zkušební ústav, s. p. ........................................................................ 100
U
UJP PRAHA a.s. ............................................................................................... 101
V
VIACELL s.r.o. .................................................................................................... 102
VITAPUR, Vlasta Veselíková .......................................................................... 103
Z
Zdeněk Holomý Electronics ........................................................................... 104
ZES Brno, a.s. ................................................................................................. 105
ZPT Vigantice spol. s r.o. .............................................................................. 106
ABNER a.s.
Headquarters: Vaclavske nam. 56, CZ 110 00 Prague 1
Plant, sales, warehouse: Lanskrounska 87, CZ 571 01 Moravska Trebova
tel.: +420 461 313 111, fax:+420 461 313 171
e-mail: abner@abner.cz
www.abner.eu
History
End of 19th century – History of ABNER a.s. dates back to 1880 when there was
silversmith workshop established and began manufacture of trays, powder compacts,
cigarette cases, boxes and cutlery. In the later period developing of production is firmly
attached to the name BIBUS.
• 1981 – beginning of production of stainless steel equipment for hospital catering
– stainless steel tray systems and transport trolleys.
• 1993 – ABNER Ltd. was established.
• 1994 – extension of pressure cartridges production.
• 1997 – company certified according to ISO 9002/1994 by BVQI.
• 1999 – transformation from limited company to joint-stock company ABNER a.s.
• 2010 – beginning of production of insulated tray system with active heating.
Products
Our production programme is focused on catering equipment made of stainless steel –
wide range of transport and manipulation trolleys, trolleys with heating or cooling, etc.
Our products ensure modern way of distribution and transport of meals in kitchens,
canteens, hospitals, nursery homes, homes for the elderly.
Isothermal tray system THERMOLINE®
The THERMOLINE® tray system was specially developed for cook & serve catering. Great
attention has been given to the new requirements in the field of hygiene. The result is a
user-friendly system which maintains an optimum temperature. The heating system of
the THERMOLINE® system has been adjusted to a food temperature of 65° to 75°C. Each
heating zone is regulated individually by means of a temperature sensor. This automatic
heating system guarantees an even target temperature of all foods using the lowest power
consumption. The heating module is covered with a lid made of polypropylene with PUR
foam core. In this way an optimum insulation for hot foods is achieved and heat transfer
to cold foods is prevented. Both the heating module and the lid are fully dishwasher proof.
Variations of tablet THERMOLINE® :
- tablet THERMOLINE® A1 – active heating of plate with main meal only
- tablet THERMOLINE® A2 – active heating of plate main meal and bowl with soup
- tablet TERMOLINE® Passive – neutral version where pre-heated china ware is being used only
Active-Tray isothermal tray system
In the Active-Tray distribution system, hot meals are heated individually and covered
with insulated domes. This provides a thermal separation between hot and cold components
and allows individual meals to be heated as required, e.g. only the porridge for breakfast
or only the soup for supper.The Active-Tray system can be used with traditional ward
trolleys but also with a docking station and transfer cart. During regeneration, the
heating system does not heat the entire ward trolley, but channels the energy directly
to the hot meals of each individual tray.
9
CONTACTS
AKC konstrukce, s.r.o.
AKC konstrukce, s.r.o, Pivovarská 10, CZ 756 61, Rožnov pod Radhoštěm
tel.: +420 571 620 771, fax: +420 571 649 011
e-mail: info@akcmed.cz
www.akcmed.com
Company AKC konstrukce is designing, manufacturing and
installing built-in operating theatres under the brand AKCmed.
Part of the product range is also touch screen control panel for
operating theatres.
AKC konstrukce is also distributing products (metal furniture)
of company BLANCO on Czech and Slovak market.
Built-in operating theatres AKCmed
AKCmed - ideal solution for:
• building of new operating theatres and
their backgrounds
• reconstruction of existing spaces
AKCmed advantages:
• flexibility for future
• resistant surface
• modern solution
• easy maintenance
• fully certified system
• worldwide experience
• conformity with EU standards
Touch screen control panel AKCmed
The only one on the market enables intuitive control of all
functions needed for operating theatres operation.
Thanks to simple software adjustment enable to additionally
adjust its functions.
All is shown and controlled on 19“control panel.
Complete solution is set up with best components available on
the world market. Diagnosis over the internet is possible.
10
CONTACTS
ALPA, a.s.
ALPA, a.s., Hornoměstská 378, CZ 594 25 Velké Meziříčí
tel.: +420 566 521 401-3, fax: +420 566 521 669
e-mail: alpa@alpa.cz
www.alpa.cz
Tradition with the ALPA trade mark
The history of the ALPA company is the history of a steady
and prosperous company. The popularity of ALPA products
has lasted for decades. After the second world war when
the production was based in Brno the company moved
to the town of Velké Meziříčí. In 1994 the company was
privatised and up to the present date it is a modern and
forward thinking company. The main assets the ALPA brand
takes pride in are the ownership of the Czech trade mark and
almost 100 years lasting satisfaction of their customers. In
2004 the company has been awarded with the ISO 9001 and
ISO 14001 certificates.
At present the ALPA company manufactures cosmetics,
especially the ALPA embrocation and products designated
for massage – emulsions, gels and creams based on ALPA
embrocation, foot treatment products, hair products and
baby and infant lotions and powders. All the products are
presented on the company web sites www.alpa.cz.
Taking into account the very good acceptance of these
products, the company management decided to commence
production of a certain type of gel as a medical device using
the relax-el® trade name. This is made in three differing
types – containing menthol, clove extract and chestnut
extract. The intended function of relax-el® applied on the
skin is supported by the effect of agents contained in the
relax-el® medical device.
At the beginning of 2006 this medical device has been
approved and registered by the Czech Ministry of Health
(under its original name ALPAGEL) and the ALPA company
endeavours to supply the market place with the highest
quality standard of these products.
11
CONTACTS
APOS-AUTO, s.r.o. - divize elektro
APOS-AUTO, s.r.o., Pražská 7, č.p. 1602, CZ 678 49 Blansko
tel.: +420 516 426 822, fax: +420 516 426 888
e-mail: apos@apos-auto.cz
CONTACTS
www.apos-auto.cz
Our products and services
Advanced Medical Solutions s.r.o. develops and
commercializes non-invasive diagnostic products and
services to private clinics, individual expert doctors,
physiotherapists and the general public for home
medicine and telemedicine.
Competitive advantage and difference
The core competitive advantage and difference to other
solutions existing on the market lies in the capability
to diagnose cardiovascular risk factors, peripheral
perfusion and related organ function and perfusion
using one integrated and automated system designed
to be used by non-expert personnel including patients
themselves.
Product status
The products have been successfully selected by major private clinics and are operated
both directly and in the telmedical mode. All products are completely non-invasive and
the diagnostics is focused on the following areas:
• Heart rate
• Pulse wave
• Peripheral perfusion
• Perfusion and related function of individual organs
The solution is commercialized in the following way:
a) Integrated cardiovascular laboratory for expert doctors in cardiology and angiology
b) Integrated evaluation laboratory for physiotherapy
c) Telemedical solution for remote expert advice and home monitoring
Note:
a) Integrated cardiovascular laboratory serves for the early detection of cardiovascular risk-based peripheral perfusion and pulse wave
diagnostics and consists of the following components:
- a portable diagnostic unit used as a wireless peripheral for a notebook, serviced by an assistant
- portable ultrasound (notebook)
b) Integrated evaluation laboratory for physiotherapy serves for screening and early detection of risks related to the cardiovascular
system and overall health status in relation to training and therapy. The laboratory is based on peripheral and organ perfusion + pulse
wave screening and consists of:
- a portable diagnostic unit used in a cardiovascular lab
- an optical system for detecting organ perfusion
c) Telemedical solution serves for remote expert advice and remote monitoring
The solution is designed for use by the patient in a natural environment outside the hospital or in remote areas. The modular
platform enables the monitoring of parameters defined by the doctor or physiologist. The solution is fully compatible with a cellular
phone.
12
ARIES, a.s.
ARIES, a.s., CZ 512 33 Studenec 309
tel.: +420 481 595 111, fax: +420 481 595 481, mobile: +420 605 599 513
e-mail: info@aries.eu
www.aries.eu
Aries Company is a leading Czech manufacturer of fashion hosiery,
medical compressive products of a brand Avicenum and sports
compression products ROYAL BAY. Through its subsidiaries, Aries is also
active in the Polish and Slovak markets and exports to a number of
foreign markets. Thanks to own R & D Department and manufacturing
process Aries is able to respond quickly to the individual needs of
individual markets.
Medical assortment Avicenum includes compression hosiery especially;
in different compression classes: Avicenum 70 (prevention), Avicenum
140 and 310 (medical therapy support) and Avicenum 360 and
520 (medical therapy of edema, lymph edema and varicose veins).
Production offer is extended by socks for diabetics (Avicenum DiaFit).
Avicenum assortment is enriched with additional health benefits such
as: medical hems, antimicrobial Sanitized® silver ions, moisturizing
microcapsules Skintex® Anti-Heavy-Legs.
Traditional Czech manufacturer of medical compression
and sports compression products
13
CONTACTS
AUDY s.r.o.
AUDY s.r.o., Živného 1a, CZ 635 00 Brno
tel.: +420 511 114 900, fax: +420 511 114 905
e-mail: info@audy.cz
www.audy.cz
The company AUDY s.r.o. is the Czech private company.
It was established in Brno in 1990. The owner is Mr.
Alois Audy. The strategic orientation of the company
is the production, sale and service of medical, sanitary
and rehabilitation equipment for disabled people. The
company has long experience in this kind of heath and
holds an exceptional position in the Czech Republic. It
has exported successfully the major part of products
in the other countries since 2001. The highest priority
of firm is the top quality of products and services.
Therefore products supplied by the company conform
with the most demaging rules and requirements valid
for medical devices. All products were awarded the
CE Mark.
Quality assurance:
AUDY s.r.o. has been certified according to the
ISO 9001:2009 standard for design, development,
production, sale and maintenance service of health
care applications, rehabilitation aids, health care
furniture and equipment.Each AUDY‘s activity is being
accomplished with a strict respect to the environment,
which can be proven by a certificate according to
the ISO 14001:2005 standard for Environmental
Management System.
The line of products:
• Walkers
• Grabrails, equipment to the bathroom
• Transport wheelchairs
• Commode chairs
• Wooden care beds
• Medical screens
• Investigative deck-chairs
• Multifuctional carts
14
CONTACTS
BEZNOSKA s.r.o.
BEZNOSKA s.r.o., Dělnická 2727, CZ 272 01 Kladno
tel.: +420 312 660 670, fax: +420 312 662 464
e-mail: mailbox@beznoska.cz
www.beznoska.cz
Beznoska Co. Ltd. has been formed by privatization process of part of Poldi Steelworks in 1992. This unit has been producing
surgical instruments and implants for traumatology and orthopedics all ready since 1969.
Since 1995 the company has been certified in accordance with ISO 9001 standards and since 2003 with ISO 13485:2003.
IN the second case Beznoska was successfully certified by a Norwegian company “DNV”. Since 1998 our company has been
authorized to use the mark of conformity “CE” in accordance with the European directive 93/42/EEC for the whole product’s
assortment. This authorization has been awarded by “Notified Body” (NB 0434).
Nowadays more than 3.000 surgical instruments and implants are included in the production assortment. There are instruments,
implants and others surgical equipment for orthopedics, traumatology and bone surgery in general. According to the surgical
use, we could divide the products to the rank for osteosynthesis use (bone joining) and to the rank for arthroplasty use (total
joint replacements).
The principle of the company development is continuou innovation. All development activities are running on the company
frame . On the company development participate 11 constructors and technologists, who cooperate together on novelties from
draft to the final design with medical experts from clinical research institutes.
Consultation during the application of the product is a part of continuous improvement of the products quality and good
services with Beznoska Company gives its customers. Beznoska Company also organized training and workshops where the
surgeons could see new products.
More than 40 years tradition of production and selling of the implants and instruments for orthopedics and traumatology is
the guarantee of the highest quality and long-lasting lifespan of Beznoska’s products.
• Total Hip Joint Replacements
• Total Knee Joint Replacements
• Shoulder Hemiarthroplasty
• Tumorous Replacements
• Revision Systems
• Intramedullary Nailing
• Plates and Screws
• Instruments
15
CONTACTS
Biomag CZ
Biomag CZ, Průmyslová 1270, CZ 506 01 Jičín
tel./fax: +420 493 691 697
e-mail: biomag@biomag.cz
www.magnetic-therapy-biomag.com
Biomag® – development and production of pulsed magnetic therapy devices. Since 1991
The philosophy behind Biomag® is to produce high quality state-of-the-art products that help people
during the rehabilitation process as well as in the prevention of health problems. Biomag magnetic
therapy devices help both in health care facilities and home care.
The new generation of Biomag magnetic therapy devices again pushes the standards in pulsed magnetic
field therapy even higher. Thanks to the use of the most advanced technologies, new therapeutical
Biomag magnetic therapy devices provide high efficiency combined with sophisticated and organized
firmware layout that every member of medical staff will appreciate. Application of the pulsed Biomag
magnetic therapy is thus even more convenient than before.
Benefits of 3D Biomag pulsed magnetic therapy
The human body consists of several billion living cells. These cells have a slight electrical potential
around them. The Biomag pulsed magnetic field penetrates deep into the body and influences this
electrical potential of the cells, stimulating them to become active.
3D Biomag pulsed magnetic therapy creates optimal conditions to accelerate healing, reduce pain and
generally regenerate the body.
Professionals from 20 countries worldwide use Biomag devices.
Visit www.magnetic-therapy-biomag.com for your business opportunity.
1
2
3
1
2
3
1
2
3
16
CONTACTS
BIONIK Stapro Group s.r.o.
BIONIK Stapro Group s.r.o.,
Pernštýnské náměstí 51, CZ 530 02 Pardubice - Staré Město
tel.: +420 466 303 139, fax +420 466 303 130
e-mail: bionik@bionik.cz
www.bionik.cz
BIONIK has more than twenty years’ tradition. BIONIK was founded in 1990. As from 1. 9.
2013, its name was changed to BIONIK Stapro Group s.r.o. The goal of BIONIK Stapro Group
s.r.o. is to act actively and directly in specific segments of medical equipment market, to react
to continuous changes and to develop a product portfolio with efficiently focused service and
support provided to all its customers in the medical technology market in the Czech Republic
and in Slovakia. Our vision is to be a respected and reputable company. Our greatest
satisfaction consists in returning health to people with the help of devices, instruments and
implants delivered by us and used by the best physicians.
WE HELP PROFESSIONALS in their immeasurable effort to HELP PEOPLE TO RETURN TO
COMMON LIFE JOYS.
The cornerstones of our product portfolio are:
Mindray ultrasound devices
Mindray is one of the leading suppliers of medical devices,
occupying a top position worldwide in ultrasounds since it
was founded in 1991.
Fukuda Denshi devices
Fukuda Denshi, a traditional Japanese company, has long
years of experience with production of ECG devices. It offers
a complete range of ECG products including models for
ergometry. Its portfolio includes also ECG Holter and VaSera,
the special device intended for early and efficient diagnostics
of cardiovascular diseases.
HOFER bone implants
HOFER is a family-type company that was established in
1976 as a trade company acting on the medical market;
since 2003, it has its own production and development. Offer
of special bone implants aimed at small bone traumatology.
ChM bone implants
CHM was established in 1981. At present, the company is
respected at international level and highly appreciated by
producers and specialists on production and development
of implants. Its portfolio consists of implants for long bone
traumatology.
RUDOLF surgical instruments for surgery
RUDOLF Medical GmbH is a traditional family company
with registered office in Tuttlingen area. It produces
comprehensive instrumentarium for general surgery,
endoscopy and comprehensive assemblies of endoscopic
towers of RUDOLF Monolith series. RUDOLF Medical GmbH
offers more than 50.000 instruments.
Bionik surgical instruments for surgery
Bionik Stapro Group s.r.o. offers a comprehensive range of
surgical instruments presented under the BIONIK brand.
17
CONTACTS
BIOPHYS, spol. s r.o.
BIOPHYS, spol. s r.o., Převoznická 738/6, CZ 143 00 Praha 4
tel.: +420 244 400 896, fax: +420 241 770 680
e-mail: info@biophys.cz
www.biophys.cz
Biophys was established in 1991 as a company
specialized on delivering medical supplies to hospitals,
health centres, laboratories, general practitioners’ and
specialists’ practices, rehabilitation facilities, nursing
homes, etc.
The Company has the Integrated Management System
(ISO 9001:2008, ISO 14001:2004) in place.
Biophys is the leader of the exporting FIRST CZECH
HEALTH ALLIANCE (FCHA) managed by CzechTrade,
state agency for support to export. Within this
Alliance we supply original systems for construction
and reconstruction of medical and pharmaceutical
facilities, operating theatres, intensive care units (ICUs),
medical laboratories, pharmaceutical production lines,
PET centres (for oncology); we deliver diagnostic and
therapeutic devices for those facilities, we equip
interiors with medical and office furniture, etc.
Biophys is member of APP (Association for Consulting)
and has established good business relationships with
a number of teaching, regional, municipal and private
hospitals, laboratories and general practitioners’ and
specialists’ practices.
Additionally to the above stated export activities, we
are interested also in cooperation with manufacturers
and suppliers of interesting products for health care
who wish to distribute them in the Czech Republic and
in Slovakia.
• IVD Medical Devices
• Furniture for Healtcare Facili es
• Equipment for doctor’s offices
18
CONTACTS
BLOCK a.s.
BLOCK a.s., Stulíková 1392, CZ 198 00 Praha 9
Correspondence address:
BLOCK a.s., U Kasáren 727, 757 01 Valašské Meziříčí, CZ
tel.: +420 571 670 111, fax: +420 571 670 244, e-mail: block@block.cz
www.block.cz
BLOCK® Joint Stock Company directs its attention since its
establishment in 1991. Among the main spheres of activities
are pharmacy and biotechnology, chemistry, laboratories, health
service, electrical engineering and food processing industry.
BLOCK® will ensure a complex delivery of construction and
technological units beginning from their primary technical
proposal, over elaboration of all needed levels of project
documentation, till their realisation, putting into operation,
measurements and tests, validations and guarantee and afterguarantee service.
To realise any demanding constructions and technologies the
company developed and innovates furthermore the complex
systems fulfilling the most severe requirements in the rooms
with stress on high quality of environment (called clean rooms).
All systems are constructional variable and that is why they can
be proposed and realised to satisfy maximally any client and
user. For all systems we manufacture, we are in possession of
valid certificates and attests on compliance of our products with
requirements of European Union. On the top of it, our products
are certified according to the regulations of Russian Federation
as well.
19
CONTACTS
BMT Medical Technology s.r.o.
BMT Medical Technology s.r.o., Cejl 157/50, Zábrdovice, CZ 602 00 Brno
tel.: +420 545 537 111, fax: +420 545 211 750
e-mail: mail@bmt.cz
www.bmt.cz
Supplier of medical, laboratory and
pharmaceutical devices
BMT provides for its own development, production, sale
and service of medical, laboratory and pharmaceutical
technology – individually constructed steam, hot air
and low-temperature sterilizers, pressure sterilization
vessels, washer disinfectors, laboratory drying ovens
and incubators for drying, cultivation and heating of
different materials in all kinds of laboratories, and
stainless steel furniture for medical facilities.
• More than 85 years of the production tradition
• Member of the international MMM-Group
• Satisfied customers in more than 100 world
countries
• Subsidiary companies – Slovakia, Poland, Ukraine,
Novosibirsk, Russia, Germany, Spain, and the U.S.A.
• Wide worldwide sales and service network
• Quality management system certification according to EN ISO 9001:2008
and EN ISO 13485:2012
• Quality certificates declare the compliance with the technical and legal regulations
for the sale of medical and laboratory technology in Europe, Asia, Africa, South
America, European Union countries, the U.S.A., Canada, and China
• Wide range of customer services – e.g. steam sterilizers validation by the
company’s own accredited testing laboratory no. 1325 according to
EN ISO/IEC 17025; turnkey deliveries of central sterilization departments
• Thanks to the information received and customer needs specification all over
the world, we optimize the properties of our devices with the aim to offer the
maximum utility. For decades already, BMT Medical Technology s.r.o. has been
delivering its products to important and top worksites all over the world. We have
been delivering devices that are subject to the customer’s wishes only
•
•
•
•
•
•
•
Large and small steam, hot-air and low-temperature sterilizers
Pressure sterilization vessels, steam generators
Laboratory drying ovens and incubators
Washer disinfectors
Stainless steel medical furniture
Turnkey central sterilization departments
Validation of steam sterilizations according to EN ISO 17665-1
by an accredited testing laboratory
• Advisory services in ISO standards introduction at central
sterilization departments
20
CONTACTS
BOCHEMIE a.s.
BOCHEMIE a.s., Lidická 326, CZ 735 95 Bohumín
tel.: +420 596 091 111, fax: +420 596 013 462
e-mail: bochemie@bochemie.cz
www.bochemie.cz
Bochemie Inc. Profile
Bochemie Inc. is one of the market-leading producers of disinfection, cleaning and
fungicide products, inorganic chemical products and products for metal surfaces and
accumulator masses. Our disinfection and cleaning products are time-proven leading
products in the Czech and Slovakian markets and are rapidly expanding to other
markets in Central and Eastern Europe.
History
In 1904 Österreichische Chemikalienwerk R. Goldschmied & Co. was founded
in the town of Bohumin. The main aim of the company was to manufacture
pharmaceutical and chemical products, among them a key product like the
artificial sweetener SACHARIN. On by-product of the production of SACHARIN
was the starting point for the manufacture of the first disinfectant CHLORAMIN T
in the 20”s.. The production of CHLORAMIN B followed in the 30”s.
The aim to supply a whole range of special chemical products created the
foundation for the long-term prosperity of the company. In the post-war era
the company focused on the development and production of unique inorganic
chemical products, such as electrochemical materials, silicon semi-conductors
and extraordinary clean gases for microelectronics.
In 1994 the company was privatized, and since 2007 has been owned by the
investment groups Benson Oak Capital and ARX Equity Partners.
Products
Bochemie Inc. is a provider of a wide range of disinfectant and sanitary products
and services for hygiene in the medical and public health sectors, in institutional
markets, in animal care, food production and food processing industries.
Traditional halogen-release based are Chloramine T and B. Currently, Bochemie
Inc. puts strict emphasis on the development of eco-friendly disinfectants, such as
our SEPTODERM, DESAM, DESPREJ, CHIROSAN and DISCLEEN series.
Quality Certifications
Bochemie Inc. repeatedly retains ISO 9001 certification of a fair and responsible
business in the chemical industry – responsible care. In 2012 ISO 13485:2003
certification was awarded which applies to the entire manufacturing process
of pharmaceuticals. Classes lla and llb of the CE certification were granted for
biocide products designed for cleaning of pharmaceutical products.
Product portfolio:
• Cleaning, disinfection and hand skin protection: Prosavon, Septoderm, Balmea
• Products for reprocessing of surgery instruments and endoscopes: Discleen, Chirosan
• Products for cleaning and disinfection of surfaces: Desam, Desprey
• Water disinfection: Desam Solid, Savagro Basic, Chloramin B
• Textile disinfection: Chirox, ProTextile Dez
21
CONTACTS
BORCAD cz s.r.o.
BORCAD cz s.r.o., Fryčovice č. 673, CZ 739 45 Fryčovice
tel.:+420 559 640 632, fax:+420 558 640 629
e-mail: borcad@borcad.cz
www.borcad.cz, www.gracie.eu
Company profile
The company BORCAD cz was established in 1990 as a construction
and development studio. It was founded by its present owner and
Executive Head Ing Ivan Boruta. Today BORCAD cz is a leading
European producer of railway and medical technologies. The
company employs 150 people, exports to 69 countries worldwide
and thanks to its unique design and original construction
solutions, it is one of the most innovative companies in this field.
In 2011 its turnover reached CZK 430 million.
Company references
In the area of medical technologies - Wissner-Bosserhoff,
Maquet, Atom Medical. In the area of railway technology Siemens, Stadler, Deutsche Bahn, ČD, Leo Express, Aeroexpress,
Alstom.
Our Portfolio
BORCAD focuses on the development, construction and
production of birthing beds and chairs (AVE and VITA),
gynaecological (GRACIE), transport (SELLA) and multifunctional
chairs (PURA).
22
CONTACTS
CLINITEX CZ s.r.o.
CLINITEX CZ s.r.o., 1. máje 3236/103, CZ 703 00 Ostrava
tel.: +421 597 578 688, fax: +421 597 579 005
e-mail: info@clinitex.cz
www.clinitex.cz
CLINITEX CZ s.r.o. (Ltd. company) was established in 2005 and
then it was focussed purely on medical textile manufacture. The
company was certified with ISO 9001:2009 and ISO 14385:2012
and nowadays, it is a major supplier of CLINITEX brand products
both to medical facilities of various types and especially to
laundries oriented to provide services for them, i.e. renting linens
and textiles in health care industry.
In the sector of medical aids’ production the company is
manufacturing and developing surgical gowns, clothing and
drapes for clean areas under the CLINITEX brand; the parameters
comply with EN 13795:2011+A1:2013 European standard. New
products include production and supply of incontinence products
in standard version as well as in special custom-made version.
If you choose CLINITEX medical wear, you will always get verified
quality, appropriate materials and components as well as perfect
design an ergonomic cut. We are anxious to listen carefully to
our customers and combine their feedback with our extensive
experience as well as hard work of the whole CLINITEX team. We
feel this is the only way for our workshops to make professional
and high quality wear.
Our manufacturing programme consists of these main
product ranges:
• Outfits for doctors
• Outfits for nurses
• Outfits for patients
• Outfits for surgery personnel
• Surgery protection and drapes
• Bed linens and flat textile products
• Incontinence products
23
CONTACTS
Codaco Electronic s.r.o.
Codaco Electronic s.r.o., Hemy 825, CZ 757 01 Valašské Meziřčí
tel.: +420 571 612 405, fax: +420 571 615 566
e-mail: codaco@codaco.cz
www.codaco.cz
The firm Codaco Electronic s.r.o. was founded
in 1993, and its main subject of activity is the
development, production, delivery and servicing
of communication systems for healthcare
(so-called “nurse-patient systems”) and control
systems for industry.
Production is implemented on our own
modern antistatic premises, meeting the strict
criteria of the standard ČSN EN 61340-5-1.
Our company is certified, and all production
processes are subject to the quality control
system ISO 9001:2008. As standard the
electronic components are made without lead
in the solder alloys and in compliance with the
valid RoHS directive of the European Union.
We currently offer an integrated range of
communication and signalling devices intended
for hospitals, sanatoria, social care institutes
and retirement homes. The systems reliably
ensure communication between clients and personnel. We offer queue management
systems for medical waiting rooms, simple nurse-patient signalling (without voice)
system and a comfortable IP communication (call) system for the inpatient wards of
medical facilities. A high level of comfort for patients and personnel, easy operation
and long-term operational reliability are our priorities.
Thanks mainly to their quality and high user value our products are used in hundreds
of medical facilities, not only in the Czech and Slovak republics, but also in Finland,
Saudi Arabia, Dubai, Poland, Russia, Kazakhstan, Azerbaijan, Cyprus, Serbia,
Montenegro, Bulgaria, Libya, Vietnam, Oman and Jordan.
24
CONTACTS
CompuGroup Medical Česká republika s.r.o.
CompuGroup Medical Česká republika s.r.o.
Jeremiášova 1422/7b, 155 00 Praha 5
tel.: +420 246 007 922
e-mail: info@compugroup.cz
CONTACTS
www.cgm.cz
We connect the health service world!
CompuGroup Medical is one of the leading eHealth companies in
the world. Its software products and communication solutions are
designed to support all medical and organizational activities in
doctors’ offices, pharmacies, laboratories and hospitals.
CompuGroup Medical’s services are based on a unique customer
base of over 400.000 doctors, dentists, hospitals, pharmacies and
networks as well as other service providers. Our locations are in 19
countries with customers in 43 countries worldwide.
CompuGroup Medical Czech Republic
CompuGroup Medical Czech Republic was established in 2009
by the merger of software companies, owned by the parent
company CompuGroup Medical. The vision of the company is fully
computerized healthcare. The company is a leader in the domestic
market of hospital and ambulatory information systems. Doctors
are highly satisfied with their products and services, as is confirmed
by periodic surveys. The company is perceived as subject that is
flexible, innovative, and interested in the problems and needs of
physicians, which in the end makes their life easier. 110 employees
work in branches in Prague, Brno, Pardubice and Ústí nad Orlicí.
CompuGroup Medical Czech Republic is a member of ICT Union
since May 2012.
Vision
Our vision is fully electronized health service. Paperless, with data stored safely and in a structured electronic form, and
at the same time accessible to authorized persons at the right moment – anytime and anywhere – to guarantee the best
possible health care.
Assignment
Our assignment is to provide our clients with the best products and services to make their work easier and more effective
and thanks to that bring them the highest possible value.
25
Daniševský, spol. s r.o.
Daniševský, spol. s r.o., Hegerova 987, CZ 572 01 Polička
tel./fax: +420 461 724 219
e-mail: danisevsky@danisevsky.cz
CONTACTS
www.danisevsky.cz
The Danisevsky Ltd., company, established in 1992, is a Czech
medical devices manufacturer and supplier of a wide range of
its products and services.
We design and produce ceiling stands, swing arms, ceiling
installation bridges and bedplatforms for anaestheticresuscitation
departments, intensive care units, operating theatres and bed
compartments of health-care units.
We project, supply and install complete distribution piping of
oxygen, compressed air and vacuums and other gases for health
service, pharmacies, food and other industries.
We supply ready-to-use compressor and vacuum plants,
step-down pressure plants and other sources of medical and
technical gases, including gas-treating units and separation of
condensate.
Ceiling stands and swing arms
We provide complete deliveries of technology in the field of
distribution, cleaning and filtration of medical and technical
gases and vacuum, either for common use or for atypical highly
effective biofiltration and other types of filtration.
Ceiling instalation bridges
Compressor station
Bed head units
Vacuum station
26
DELONG INSTRUMENTS a.s.
DELONG INSTRUMENTS a.s., Palackého třída 153b, CZ 612 00 Brno
tel.: +420 549 123 511, fax: +420 541 217 976
e-mail: sale@dicomps.com
www.dicomps.com
The establishment of the company dates back to
May 1990. From the beginning, the company was
concentrated on the areas of electron microscopy and
vacuum technology. The company is entirely Czech
subject.
• LVEM 5
• Desktop Low Voltage
• Electron Microscope
27
CONTACTS
DESSTER s.r.o.
DESSTER s.r.o., Balbínova 9, CZ 400 01 Ústí nad Labem
tel.: +420 472 742 023, fax: +420 472 742 023, GSM: +420 602 147 269
e-mail: desster@volny.cz
www.desster.cz
Desster s. r. o. is a sales and service company operating on Czech market since 1993. It was founded by former employees of
Chirana OTS, therefore it actually followed the tradition of a company which had been selling and servicing medical equipment
since 1955.
Its activities are aimed above all at the area of sterilisation and rehabilitation in health-care. It sells and provides customer
service for medical appliances used to sterilise all materials and tools, which are needed in this field, further on, it sells and
services equipment for hydrotherapy.
Desster s. r. o. is a sales and authorised service partner of the biggest manufacturer of medical equipment in the Czech
Republic, BMT Medical Technology s. r. o. Brno, authorised business and service partner of Kovos Czech s. r. o., manufacturer of
rehabilitation bathtubs. It is also an authorised service partner of Chirana Progress s. r. o., manufacturer of hydrotherapeutic
equipment.
Even though we are a smaller company, we can do what bigger companies can. We have contract partners and with them we
can realise workplace reconstructions, including construction adjustments. Last reconstruction of such proportions was the
reconstruction of central sterilisation unit in Litoměřice Municipal Hospital. We have also provided sterilisation technology for
hospitals in Slaný, Most, Žatec, and for many private practices.
The aim of our activity is to completely satisfy our customer by ensuring high-quality and complex service.
Activities of this company:
• Design and solutions of workplace equipment
• Equipment sale
• Mounting, warranty and after-warranty service
• Staff training
• Equipment revision
• Consumer material delivery
• Safety and technical checks
• Technical condition assessment
Our products:
• All sterilisation appliances made by BMT Medical Technology s. r. o.
• Low-volume steam sterilisers designed according to customer’s
requirements
• Hydrotherapeutic appliances made by Kovos Czech s. r. o. and Chirana
Progress, s. r. o.
• Hawo sterilisation packaging welders
• Packaging materials for sterilisation by all media made by Stericlin
• Indicators and tests for sterility checks with all media
• Other consumer materials and equipment according to costumer’s
requirements
28
CONTACTS
DIPLOMAT DENTAL s.r.o.
DIPLOMAT DENTAL s.r.o., Vrbovská cesta 17, SK 921 01 Piešťany
tel.: +421 (033) 79 54 111, fax: +421 (033) 79 54 445, 77 26 326
e-mail: info@diplomat-dental.com
CONTACTS
www.diplomat-dental.com
Allow us to introduce to you our company DIPLOMAT DENTAL
s.r.o. situated in the word-famous spa town of Piešany, known for
its thermal water and long-term tradition of medical engineering
production. The firm continues to draw upon the experience of
workers from the former company of Chirana Piešany a.s. founded in
1962. Since its foundation in July 1997, DIPLOMAT DENTAL s.r.o. has
focused on the development, production, sale and service of dental
equipment.
The field of the production of dental units, dental chairs and stools
of the DIPLOMAT series has become the leading programme of the
company.
DIPLOMAT DENTAL s.r.o. is a classic representative of an engineering
company with its own development department which tries to develop
and enhance dental products intended for all kinds of demanding
operations and expectations of dental practice in accordance with
the customer’s requirements. Products of Diplomat series cover the
CONSUL, LUX and ADEPT dental units, DE20 and DM20 dental chairs,
D10L dental stool and Xenos dental operating light. The units are fitted
with high-quality instruments of the Swiss-based company BIEN AIR
with the possibility to choose individual instruments. Delivered with
the units are a programmable chairs, which together with the dentist
stool and assistant stool form the harmonic set.
The saleability of our products is enhanced by a wide commercial
and service network both in Slovakia and abroad. Training sessions
are regularly organized from the knowledge of merchandise for
business partners and training sessions for service engineers.
The main objective of DIPLOMAT DENTAL s.r.o. is to obtain perfect
satisfaction of customers, which results, among others, also in the
fact that since its foundation the company reaches growth in the
sales volume of more than 20% each year. In the year 2008 the
sales reached the level of more than 2400 pieces of dental units,
2400 pieces of dental chairs and 3000 pieces of stools.
Export, particularly to Russia, Ukraine, Poland, Czech Republic,
Hungary, Kazakhstan, Lithuania, Latvia, Croatia, Portugal, Germany,
France and other EU Member States, South-East Asia and Arabic
world makes 95% of the total volume of sales.
Diplomat Adept DA 170
Diplomat Adept DA 370
Diplomat Consul DC 350
Diplomat Lux DL 210
29
DN FORMED Brno s.r.o.
DN FORMED Brno s.r.o., Hudcova 76a, CZ 612 48 Brno
tel.: +420 532 198 888, fax: +420 532 198 889
e-mail: dnformed@dnformed.cz
www.dnformed.cz
The company was founded in 1992 as original Czech Business
Company specialized for sale of the medical devices for hospitals,
laboratories and spa. The company was certified by TÜV SUD
according to the EN ISO 9001:2009 system.
The company disposes with an engineering office specialized in
medical and laboratories technology for securing delivery of
complex technological solution for medical fields.
•
•
•
•
•
•
•
•
Operation room
Devices for surgery, gynecology, urology and proctology
Intensive care
Mothers care
Rehabilitations and balneology equipment
Laboratory equipment
Service, metrology and validation
Design studies and project
Export division
• Design studies, business plan and project for
rehabilitation and spa
• Hydrotherapy, physiotherapy
• Cryotherapy and cryochambers
• Design studies and project for laboratory equipment
• Boxes for cytostatic and pharmacy
• Medical Technology for modular hospital
30
CONTACTS
DOMKAT, s.r.o.
DOMKAT, s.r.o., U Rybníka 1922/17, CZ 586 01 Jihlava
tel./fax: +420 567 210 057, GSM: +420 736 626 023
e-mail: info@domkat.cz
www.domkat.cz
DOMKAT, s.r.o. is engaged in developing and manufacturing hydraulic pumps / actuators designated mainly for manufacturing
medical beds, chairs and bathroom jacks. All products are designed with the needs of medical furniture producers. Since its
foundation 2003 all activities have been based on close cooperation with well-known customers from Europe.
DOMKAT, s.r.o. is going to do the best to be the reliable partner of you.
• Professional hydraulics for medical furniture
31
CONTACTS
EGO Zlín, spol. s r.o. (Ltd.)
EGO Zlín, spol. s r.o. (Ltd), U Pekárny 438, Štípa, CZ 763 14 Zlín
tel.: +420 577 100 031, fax: +420 577 914 363
e-mail: sekretariat@egozlin.cz
CONTACTS
www.egozlin.cz
EGO Zlín, spol. s r.o. (Ltd), the Czech private company, established in 1992, has been becoming very early a highly regarded
producer and distributor of systems used when dealing with critical situations (traffic accidents, environmental disasters, industrial
disasters, occurrence of dangerous infections). The marketing activities of the company EGO Zlín are focused on deliveries to
clients working for public sector such as hospitals and their infection wards or incoming emergencies, health rescue service, fire
brigades, police, hygiene clinics, veterinary service, county and municipal crisis wards, public funds, military health and logistic
units, CBRN defense units, etc.
The company´s products have been finding its satisfied clients in more than 30 foreign countries, not only the neighbor ones such
as Slovakia, Austria, Poland, but also in Lithuania, Latvia, Estonia, Croatia, Ukraine, Russia, Kazakhstan, Belarus, Taiwan, Brazil, and
many others.
The company participates at least twice a year in prestigious international health care or defense industry trade fairs (MEDICA
Düsseldorf, ARAB HEALTH Dubai, IDET Brno, DSEi London, EUROSATORY Paris, etc.). Company EGO Zlín also annually holds
a special international conference called „Medicine of Disasters“, which focuses on dealing with crisis situations.
•
•
•
•
•
Transport bags for contagious patients
Mobile chambers for patient isolation
Decontamination system
Individual portable inflation tents
Vacuum fixation splints and mattresses
System of biological protection
...includes the products to be used in protection
system when dangerous microorganisms
appear in the environment (highly dangerous or
virulent infections);
•
•
•
•
Stretchers and groundsheets
Optimized medical rucksacks or suitcases
Antidecubite stretchers, mattresses and pads
Items for hygiene of immobile patients
Tent system
...includes the products to be used for short or
long terms shelters in field conditions;
Emergency system
...includes wide range of products used in
urgent medicine such as high quality vacuum
fixation splints and mattresses, specialist rescue
equipment such as stretchers and groundsheets
etc, optimized medical rucksacks or suitcases
fully equipped under the relevant laws.
Decontamination system
...includes products ensuring immediate
decontamination, rinsing and cleansing
of people, equipment and devices in field
conditions;
System of items for immobile patients
...includes products which help to care for
immobile patients, such as antidecubite
stretchers and mattress (various types according
to the severity of bedsores), antidecubite pads,
items for hygiene of immobile patients, etc.
32
EKOVUK MEDI, s.r.o.
EKOVUK MEDI, s.r.o., Na Maninách 1590/29, CZ 170 00 Praha 7
tel.: +420 220 303 000, fax: +420 220 303 008
e-mail: info@pneuven.cz
www.pneuven.cz
The company manufacturing and supplying
medical devices for pressure therapy
was established in 1992. The devices,
together with the respective sleeves, are
intended for special lymphological medical
centres, dermatic clinics, surgeries spas,
rehabilitation departments, beauty salons
and all specialized centres using pressure
therapy. The company has a certificate for
QMS in accordance with ISO 13485 and
our products are CE marked.
PRODUCT RANGE
Devices PNEUVEN are produced in three
categories:
PNEUVEN MEDI
PNEUVEN RELAX
PNEUVEN KOSMETIK
The devices are universally applicable for following indica ons:
• Swellings caused by congenital and acquired disorders of the
lympha c system
• Swellings a er vein inflamma ons
• Preven on of deep vein inflamma ons pre- and post- opera ons
• Rehabilita on of post- thrombosis disorder
• Chronic venous deficiencies
• Therapy of calf-ulcers
• Swellings caused by func onal wear-out of lower limbs
• Rehabilita on of sportsmen and persons with strained limbs
• Organism regenera on
• Cosme c improvements of thighs
33
CONTACTS
EKOM spol. s r.o.
EKOM spol. s r.o., Priemyselná 5031/18, SK 921 01 Piešťany
tel.: +421 337 967 211, fax: +421 337 967 223
e-mail: ekom@ekom.sk
www.ekom.sk
EKOM spol. s r.o. is a Slovak company dealing with the development
and production of medical equipment in particular and since
2000 also with thin sheet metal processing using CNC technology.
The company´s main objective is to manufacture competitive
products which meet the most-demanding market requirements
and to improve product quality and the quality of manufacturing
technologies systematically.
The core of Ekom´s product range consists of oil-free dental
compressors, suction units as well as their accessories. All of them
are designed for use in dental surgeries, dental laboratories and for
small and middle sized central air supply systems.
Along with dental compressors company produces medical compressors for supplying lung ventilation
equipment with medical grade air. Nowadays Ekom supplies the whole range of standard and
customized medicine compressors solutions to the majority of ventilators and anesthetic devices
manufacturers.
Self-lubricating piston rings made of Teflon, medically sound components, internal surface of air
chambers covered with a protective layer, automatic dryers and filtration units are the guarantee of
a high quality air supplied by Ekom compressors. Thanks to a low noise level and oil-free technology
do Ekom products respect also environment protection requirements. Even this advantage makes the
products very attractive worldwide and therefore Ekom spol. s r.o. exports 99% of annual production
abroad.
Obviously the mentioned products meet the quality and safety standard in accordance with the
international European directive MDD93/42 EEC (ISO9001:2000/ISO13485:2003), the American
k510 (FDA) as well as the Canadian CMDCAS system.
• Dental compressors for dental prac ces and dental laboratories
• Suc on pumps
• Components for air filtra on and drying systems
34
CONTACTS
ELLA-CS, s.r.o.
ELLA-CS, s.r.o., Milady Horákové 504, CZ 500 06 Hradec Králové 6
tel.: +420 495 279 111, fax: +420 495 265 655
e-mail: info@ellacs.eu
www.ellacs.eu
This company was established in 1991 and specializes in production of special
medical equipment. ELLA-CS is a purely domestic company without any foreign
ownership. At present it has 110 employees.
The company came into existence as a logical continuation of production activity
dating from 1986 under the auspices of the Medical Faculty of Charles University,
Institute of Experimental Oncology in Hradec Králové. Export activities began with
special thermocouple probes for radiothermotherapy that were developed in the
above mentioned institute.
The company extended its range of products to include production of implantable
stents, extractors and other special devices. Our core business is the development
of original products in close cooperation with eminent clinical centres. Currently,
the company has a portfolio of 3 globally unique products – biodegradable BD
Stent, Danis Stent to stop bleeding from esophageal varices and ELLA Extractor
for easy and safe removal of implanted stents in the esophagus.
Clean room technology, utilizing GMP (Good Manufacture Practice) in ISO Class 7
(EN ISO 14644) was installed for our two production facilities. GMP meets the
highest criteria for production of implants and is validated for this kind of activity.
The audit (TÜV) for obtaining the ISO 9001, EN 46001 and first CE Mark certificate
was successfully conducted in 1996. Since 2004 the company is certificated and
meets the requirements of EN ISO 13485 standard. The credo of the company has
been since the very beginning to be a partner to physicians when solving their
problems – either in experimental or clinical fields – and to react in a flexible way
to their demands.
The company has also focused on solving developmental tasks in cooperation with
prestigious foreign and domestic institutions. The company intends to be a leader
in development of new types of medical devices in the Czech Republic and to be a
direct commercial provider. In addition, the company intends to gradually extend
the range of newly developed products and further expand exports and future
branch offices outside the Czech Republic.
•
•
•
•
Gastrointestinal stainless steel and nitinol stents
Esophageal biodegradable stent
Extractor for esophageal nitinol stents
Quality System in accordance with EN ISO 13485:2003
35
CONTACTS
EMBITRON s.r.o.
EMBITRON s.r.o., Borská 55, CZ 301 00 Plzeň
tel.: +420 377 423 556
e-mail: embitron@embitron.eu
www.embitron.eu
Embitron Ltd. is the producer and distributor of medical devices for physiotherapy,
spa and wellness as contactless electrotherapy, biostimulation lasers, pressotherapy,
passive motion devices etc.
Embitron company is an important initiator and innovator of the vacuum compression
therapy for the treatment of the arterial diseases, metabolism stagnations of
the arterial, diabetic, neurocirculatory or post-traumatic origin (medical device
EXTREMITER 2010 Better future edition). Another method which was researched,
produced and implemented into medical care, is distance electrotherapy with VAS07 Better Future edition device inducing analgetic, healing and regeneration effects.
Moreover, EMBITRON company is focusing either on individuall bussiness, research,
development, projecting and consulting activities in complex rehabilitation, spa and
wellness projects in Czech and Slovak Republic as well as foreign countries all over
the world.
Embitron Ltd. is fully certified in research, development, production by quality
mark ISO 13 485 : 2003. All of the devices supplied are compatible and certified
by European Union Directive 93/42/EEC and CE mark. Some of the devices are also
certified for medical care in Russia and USA.
• Vacuum Compression Therapy
• Distance Electrotherapy
• Pressotherapy and local bulb vacuum
therapy
• Electrotherapy
• Biostimulation Lasers
• Lymphodrainages
• Passive motion devices
• Acupuncture Devices
• Komplex projects of Spa and Wellness
REHABILITATION
DIABETOLOGY
ANGIOLOGY
PHLEBOLOGY
PHYSICAL THERAPY
36
CONTACTS
eNZi.cz s.r.o.
eNZi.cz s.r.o., Poláškova 32, CZ 757 01 Valašské Meziříčí
tel.: +420 571 610 387, +420 777 773 567, +420 777 773 568
e-mail: enzi@enzi.cz
www.enzi.cz
Design works
Design works with focus on pharmaceutical industry and public health
care from the formation of concept, consulting with the customer and
user up to elaboration of project for building permit and project for
realization of construction.
Supply and installation
Supply and key-ready installation (arranging for engineering activities
– built-in clean premises including air-conditioning and ventilation,
technology, equipment, installation of media. All that using components
and materials specifically intended for the given type of job order.
• Design and installation of clean premises for development, research
and production of pharmaceutical products, drugs and other
preparations
• Design and installation of operating theatres of all the categories,
complete operation tracts, hospital assemblies, intensive care units,
anesthesiological-resuscitation wards, central sterilization departments,
laboratories
• Realization of production premises with high demands for absence of dust,
temperature, humidity and overpressure
• Validation – installation, operational qualification of clean premises, media
and technologies including measurement and regulation systems; we ensure a
complete package of services in the area of validations - DQ, IQ, OQ, PQ, VMP,
consulting of GMP and QA regulations
• Service – within supplies we ensure professional service of devices supplied by us
We realize our businesses in many regions and countries, we specialize predominantly
in Russian Federation, EU countries and Czech Republic.
We dispose of design and realization team of experienced professionals, engineers
and technologists that have long been engaged in the area of design and installation
of clean premises.
Design, realization and supply of clean premises and technological
assemblies in the area of pharmacy and medicine.
We offer our services predominantly in the area of pharmaceutical
industry and public health care. Briefly there where it is necessary
to meet the conditions of GMP and GLP regulations and with
regard to special technologies installed in clean facilities.
37
CONTACTS
ERGON a.s.
ERGON a.s., Papírenská 1, CZ 166 11 Praha 6
tel.: +420 234 123 111
e-mail: info@ergon.cz
www.ergon.cz
Ergon a.s. is a leading Czech manufacturer of health
clothing and the largest Czech manufacturer of
individual orthopaedic footwear and insoles.
The firm’s history dates back to the early 20th century,
it was transformed into a stable stock company without
foreign participation in 1997. The firm has invested
a substantial amount of financial volume into the
reconstruction of its premises in Prague 6 over the past
years that, together with the quarters used directly by
our company, represent a contemporary commercial
and administrative centre.
Regarding the manufacture of health clothing,
our firm looks back on many years of tradition, seeing it
advance to the position of a well-established supplier in
both the Czech and foreign markets, and its products are
sought after based on their quality and the firm’s pricing
policy. Ergon a.s. manufactures: hernia, abdominal, and
lumbar belts, orthoses, bandages and physiotherapy,
anti-decubitus and positioning pads, fixation devices.
Manufacture of individual orthopaedic footwear
and insoles
Ergon a.s. is currently the largest domestic manufacturer of
individual orthopaedic footwear and insoles, with a broad
range of activities that span the whole Czech Republic
territory. The unique production technology of individual
orthopaedic insoles was established several years ago and
relies on the digiMED system – a digital baropodometry
(pedography) system that enables the exact measurement
of pressure loadings to the soles of the feet, and the exact
design of insoles including computerised correction according
to a physician’s prescription, and 100% exact milling with a
computer-controlled small cutter.
Our more than three-quarter century long production
tradition foreshadows the rich experience and craftsmanship
that guarantee the quality of our products. At the same time,
Ergon a.s. is a firm that employs cutting-edge technologies,
designing methods and materials.
Activity of the firm focuses on the following spheres:
• Manufacture of health clothing
• Manufacture of individual orthopaedic footwear and insoles
• Sale and lease of digiMED systems
• Operation of medical device retail stores
38
CONTACTS
ERILENS s.r.o.
ERILENS s.r.o., Papírenská 114/5, CZ 160 00 Praha 6
tel.: +420 234 123 456, fax: +420 234 123 360
e-mail: info@erilens.cz
www.erilens.cz
The company’s mission is to create optimal conditions for health
and home care providers and for their work to help patients in
their daily life, using recent technology and modern methods.
ERILENS was established in 1992 as a family company. The family
members are active in company’s management. Since 2010 was
ophthalmological division moved to the Videris Ltd. (Prague,
Czech Republic), company of ERILENS Group.
There are 21 employees in ERILENS. The turnover of the company
is growing.
Currently there are two main activities in different divisions in
ERILENS:
The ROOMER division
is projecting and completing unique system for transportation
of disabled immobile persons. The system helps to move patient
very easy from anywhere you need: from bed, chair, water closet,
and bath or from house to car.
It isn’t necessary to modify the facility’s walls, doors etc. to
install the system. The rails of portable overhead lift are discrete and good looking.
ERILENS prepares all technical documentation, incl. checking of system’s statics in
specific facility.
The REHA division
The mission of the REHA division is to provide handicapped persons and those who
care about them with services and products created to make the care easier and the
life more comfortable. The division was established in 1997 by acquisition of existed
facility. The technology and the products were innovated. Currently ERILENS Ltd. is
the market leader on the market of walking - locomotion aids in the Czech Republic.
A significant volume of the product is exported especially to a number of European
countries.
ERILENS finalized new design and development of 2 new types of crutches in
autumn 2009. The first of them is new designed forearm crutch FD93NEW. There
is the enhanced strength (150 kg) and new anti-clacking system on it. The second
one is wholly new type VERA with softened gripe.Last but not least products of the
REHA division are for example finger splints, plaster fixation material Optima Cast
and oscillated saw for removing the plaster and similar casts at hospital’s surgery
departments.
Activities of ERILENS s.r.o. in Slovak Republic:
In 2001 was founded firm named ERILENS Slovensko s.r.o., which is extending
activities of both divisions within territory of Slovak Republic.
39
CONTACTS
FAVEA Europe, s.r.o.
FAVEA Europe, s.r.o., Business Center Gemini,
Building B, Na Pankráci 129/1724, CZ 14000 Prague
tel.: +420 777 121 000, fax: +420 225 992 201
e-mail: prague@favea.org
www.favea.org
FAVEA is a leading engineering company in realization of new pharmaceutical
projects and in renovation of existing facilities. Since 1992, FAVEA has developed and
realized pharmaceutical projects such as building of cleanrooms and surgery blocks,
air conditioning and ventilation systems. FAVEA also supplies equipment, launches
production lines, performs validation and certification of the new objects in compliance
with GMP.
Our client base includes such famous companies as «Nizhpharm», «Pharmstandard»,
«Tathimpharmpreparaty», «Soteks», BHFZ, Darnitsa etc.
In the year 2010, in Moscow, FAVEA won a prestigious “Platinum Ounce”, a special
award for “The successful implementation of the pharmaceutical projects in accordance
with the GMP standards in the Russian Federation”. This significant award was granted
for the realization of many successful projects during more than ten-years practice in
accordance with modern standards of Good Manufacturing Practice (GMP).
• Development of pharmaceutical production and medical facilities, cleanrooms and
operational blocks projects in compliance with GMP standards;
• Projection works in compliance with international standards, Russian norm GOST
R 52249-2004 introduced in 01.01.2005, and Ukrainian norm - DBN A.2.2-97;
• Pharmaceutical and medical engineering;
• Organization of construction works;
• Complex supply of clean rooms in compliance with requirements of GMP standards
and ISO 14644 (space planning, doors, floors, ceilings, lighting, filters, ventilation
grates, etc.);
• “Turnkey” installation of clean rooms, including ventilation and air condition
systems etc.;
• Delivery of special stainless furniture for clean rooms;
• Delivery of the pharmaceutical technological equipment;
• Delivery of equipment for gaining, distribution and storage of water PW and water
for injection WFI;
• CIP / SIP stations;
• Installation and launch of the technological and auxiliary equipment;
• Startup of pharmaceutical production;
• A full validation of the pharmaceutical production in compliance with the GMP: the
specification of the project, specification of clean rooms and ventilation systems,
specification of technological equipment and engineering systems, validation of
processes including the validation of projection documentation;
• Training of qualified personnel for our Customer;
• Delivery of GMP education and consultancy;
• Building/reconstruction financing services.
40
CONTACTS
FOMA BOHEMIA spol. s r.o.
FOMA BOHEMIA spol. s r.o., Ul. J. Krušinky 1604, CZ 501 04 Hradec Králové
tel.: +420 495 733 288, fax: +420 495 733 376
e-mail: foma@foma.cz
www.foma.cz
The company profile
FOMA BOHEMIA spol.s r.o. is a manufacturer of photographic materials with more
than 90 years of tradition.
In the 1997 year the quality assurance system according to the ČSN EN ISO 9001
and ČSN EN ISO 13485 Standards has been implemented. In 2001 the entitlement
to use the European Conformity mark CE according to the Directive of the EU No.
93/42/EHS for the X-ray films of MEDIX and DENTIX brand names has been obtained.
The production lines and actual offer
• The films and processing chemicals for the radiology, for the dentistry and for the
veterinary
• The X-ray devices for medical use and the accessories for them – versatile usable
high-frequency X-ray system FOMAtec HF for general radiography. Option: direct
digital radiography with a flat-panel detector technology, using a control monitor
for displaying captured image and data storing in DICOM 3.0 system
• Accessories for X-ray working places
• Indirect radiography - CR
• The darkroom equipment – cassettes, intensifying screens, the protection aids,
the safe-light sources, the viewers (negatoscopes), the sensitometers and
densitometers, the film processors
•
•
•
•
X-ray films
Processing chemical for X-ray films
Medical X-ray systems
Accessories for X-ray working places
41
CONTACTS
GEA Heat Exchangers a.s.
GEA Heat Exchangers a.s., Slovanská 781, CZ 463 12 Liberec 25
tel.: +420 485 225 111, fax: +420 485 225 112
e-mail: airtreatment-cz@gea.com
CONTACTS
www.gealvz.cz
Top GEA competence for optimum quality Healthcare
Energy-efficient packages for strictest hygienic requirements in hospitals
GEA: leading worldwide in heat exchange
As an internationally active technology group, GEA Group concentrates on process
technology and components for demanding production processes in a wide variety of end
user markets. GEA Heat Exchangers, the largest segment within GEA Group, consolidates
all the activities in the area of heat exchange and offers the probably largest portfolio
worldwide in this field. Heat exchange with HX-Factor: that means customized, reliable,
and sustainable solutions conforming to the signs of the times. GEA Clean Rooms are
impressive proof of this quality and innovative strength.
GEA Clean Rooms
Clean rooms and ultra-clean rooms represent some of the most complex challenges for air
treatment. They demand absolutely top standards of competence, sophisticated air treatment, as well as specific experience for clean rooms that
you can trust. GEA Clean Rooms satisfy all international clean room standards and ISO classifications. They far exceed conventional quality levels.
Covering the entire process for turnkey solutions
GEA customers profit from our comprehensive overall expertise in room air handling and filter technology. In contrast to other providers, we cover
the entire process of air treatment and air filtration for supply air and extract air systems. We understand the interrelationships and manage
them down to the smallest detail. As a result, we can offer highly effective, process-dedicated package solutions with energy-efficient technology
– optimized for your sector and applications. Efficient GEA Heat Recovery Systems and reliable GEA Air Filtration Systems with low pressure
drop assure considerable energy savings. We deliver turnkey solutions on a one-stop shopping basis: beginning with building elements such as
ceiling grid modules, filter and panel ceilings, laminar flow ceilings, room walls, wall panelling, windows, and doors – including development and
installation of your clean room facilities and extending to after sales service.
One-stop solutions:
•
•
•
•
•
Room air handling
Air filtration
Cleanroom design software
Laminar flow modules
Ceiling, including lighting
•
•
•
•
•
Partition-wall panels
INWALL Click® covering panels
Windows and doors
Monitoring and documentation systems
After sales service
GEA Clean Room system solutions
Maximum benefits with manageable investment
GEA manufactures and delivers a comprehensive system of built-in clean rooms, which enables a decrease in the number of undesirable airborne
particles to a level suitable for healthcare complying with the requirements of standard EN ISO 14644. The GEA portfolio includes wall panels,
wall lining, doors, pass-through boxes, ceilings, laminar fields, ceiling air outlets, light fixtures, as well as air handling and HVAC components.
GEA Clean Rooms allow easy integration of display and diagnostics systems into the internal wall cladding of operating rooms. The whole product
range conforms to strict requirements for working areas prescribed by health care systems: e.g., specifications relating to as clean ability, air
exchange, even air flow, and lighting.
Applications:
• Operating rooms
• Intensive care units
• Pharmacies
• Radiography, CT, MR
• Laboratories
42
CHEIRÓN a.s.
CHEIRÓN a.s., Ulrychova 2260/13, CZ 162 00 Praha 6
tel.: +420 377 590 433, fax: +420 377 590 435
e-mail: export@cheiron.eu
CONTACTS
www.cheiron.eu
SUCTION UNITS
History
Founded in 1994, CHEIRÓN a.s. is today a leading company in development,
production, import, distribution, export and service of medical equipment and
it is well known in more than 45 countries.
Products
The company´s product portfolio consists of product lines of international
award winning electrical suction units VICTORIA, portable suction units
DYNAMIC, QUICK VAC TRANSPORT, complete range of jet suction sets and
accessories, aerosol and oxygen therapy devices.
DYNAMIC
Quality
Our company policy focuses especially on high quality and 100% safety of
delivered products and services. The complete production process is controlled
as per standard harmonised system and it is fully in accordance with DIR
93/42/EEC and other requirements valid in EU and GOST standard. CHEIRÓN
a.s. is certified by compliance to EN ISO 9001 and EN ISO 13485.
A team of top specialists with long-term professional experience is working
hard to meet all the needs of our customers. CHEIRÓN a.s. runs a systematic
professional training programme for each of the teams members, including
external training sessions at our international suppliers. Thanks to the growing
experience and skills each of our employees significantly contributes to the
improvement and further development of CHEIRON´s products.
QUICK VAC TRANSPORT
Distributor leadership
To ensure maximum availability of products and services CHEIRÓN a.s. has
established a number of local offices all across the Czech Republic and it is
creating a powerful network of international distributors worldwide. In order
to keep tight contact with our customers we meet our clients and business
partners regularly at several international congresses and trade fairs, e.g.
Medica – Dűsseldorf, Zdravoochranienie – Moscow and Arab Health – Dubai.
The complete range of all our products is presented on our web site enabling
direct order placing.
VICTORIA
43
CHEMCOMEX Praha, a.s.
CHEMCOMEX Praha, a.s., Elišky Přemyslovny 379, CZ156 00 Praha - Zbraslav
tel.: +420 226 259 111
e-mail: chemcomex@chemcomex.cz
CONTACTS
www.chemcomex.cz
SED
SED is a system for automated calculation, evaluation and archiving of
organ and effective doses obtained by a patient during diagnostic and
intervention examinations employing ionising radiation exposure for
medical purposes.
Data
Data of individual examinations are sent to the system by means of DICOM
files, usually originating from the hospital’s PACS system. The SED system
also allows capture of the examination data directly from the individual
devices. Optional connection to the hospital’s information management
system such as RIS is also available.
Calculation
SED provides automated dose calculation for the following essential
modalities:
• radiography
• computed tomography
• angiography
• mammography
DRL
SED also performs automated calculation of the values of local radiological
levels from the collected and evaluated data. This allows to directly
compare performance of the individual devices against the national
radiological standards or to monitor temporal changes of these values.
Web Interface
• on-line dose indication – SED system provides web interface that allows
to easily read patient’s obtained effective and organ doses within
minutes after the examination in question took place.
• statistics – the web interface works with a whole range of statistical
data regarding the number of examinations, dose averages for each
examination, comparison of individual devices or comparison of
doses related to the operating personnel. This analysis can contribute
to detection of discrepancies and thus to reduction of the radiation
exposure of the patients. Statistical analysis is presented by means of
well-arranged tables and interactive graphs.
• data export, protocols – web interface also provides exporting
functionality of the data for post-processing using external resources.
That includes export to ubiquitous PDF format. There is also an option to
generate protocols regarding the obtained dose for each patient.
SED is therefore an essential tool for any hospital or medical establishment
concerned with QA of medical examinations involving ionising radiation.
44
CHIRANA Medical, a.s.
CHIRANA Medical, a.s., Nam. Dr. A. Schweitzera 194, SK 916 01 Stara Tura
tel.: +421 918 714 000, fax: +421 327 752 218
e-mail: medical@chirana.eu
www.chirana.eu
The history of a company started in 1935, in the early
1960’s the production of dental equipment began.
The production of medical devices still continues in
companies CHIRANA Medical and CHIRANA, STARA
TURA.
The Group’s strategy is to continually offer high quality
products in very short delivery periods. To be able to
ensure the necessary high quality, the company uses
modern technologies, such as NC and CNC machines.
In the last couple of years, significant investments have
been made in the entire holding, which were aimed at
changing the manufacturing process and the complete
overhaul of both plants (dental and healthcare devices
production). The investments have had very positive
effect with regards to lowering costs, increasing the
flexibility of production and also the visual, safety and
environmental aspects of production. Wide range of
product portfolio has traditional features. If compared
with major worldwide competitors the Group’s product
portfolio is comparable regarding to utility parameters
and quality and in the area of range and special
features outperform most competitors in the business.
Product portfolio of CHIRANA:
• dental units CHEESE, Smile
• dental chairs
• dental instruments
• anaesthesia units VENAR
• breathing units – CHIRANA Aura
• patients monitoring systems for intensive care
The modular concept is the characteristic feature of the products. It allows
costumers to choose from many various products. The company doesn’t
produce the products to stock for further sale but prefer the production in
accordance with concrete order of customer following its specific request
and features. Standard delivery time is in range from 14 to 45 days.
Put our trust on tradition
... since 1935
45
CONTACTS
CHIRASTAR KDT, s.r.o.
CHIRASTAR KDT, s.r.o., Vlnitá 52/425, CZ 147 00 Praha 4
tel./fax: +420 244 464 234
e-mail: kdt@iol.cz
www.chirastar.com
The Czech company CHIRASTAR KDT, s.r.o. has been
developing and manufacturing dental equipment
since 1994. The main product in program composes
of the production of dental sets under the registered
trade mark BOHEMIA. Quality Management System is
certified according to EN ISO 13485:2003 (Directive
93/42/EEC), Certificate CQS – IQNet.
Export is a very substantial part of our business
activities. We are authorized to sell our products not
only on the market in Czech Republic and EU and also
in Russia and Belorussia.
On the year 1997 we are finished the development
own stomatologic set. For the control the tools we
are used own simple and reliable system, developed
at the reconstruction olderst sets – also several years
examinated. The set we are drafted how chair-carried
with upper guiding of the tool-hoses. In the course of
the development we are bringed to the market another
types – five-tools sets, stationary sets, sets with lower
guiding of the tool-hoses and the latest-set with
external tooltable with a large tool-server.
If we may keep relativ low price, we are invested in
metal-working machine and in this time our firm
producted 80% components in our product-areas in
Prague and Brno.
Export is for Chirastar priority business.
46
CONTACTS
CHIRMAX s.r.o.
CHIRMAX s.r.o., Komořanská 955, CZ 143 10 Praha 4-Modřany
tel.:+420 241 768 407-8, fax:+420 244 400 910
e-mail: chirmax@chirmax.cz
www.chirmax.cz
The tradition of manufacturing surgical suture material
at Chirmax goes back over more than 80 years.
Classical material have been supplemented by
a large number of synthetic fibers and result in the
current modern product range of absorbable and
non-absorbable sutures which in the meantime amout
to more than 1200 individual products. Production
takes place in accordance with GMP guidelines and a
comprehensive quality management system has been
implemented.
PRODUCT RANGE
ABSORBABLE
MONOLAC monofil
POLYDOX monofil
Description
Polyglycolic acid and e-caprolacton
copolymer, violet, natural
Polyglycolic acid, violet, natural
Polyglycolic acid, violet, natural
quick absorbable
P-Polydioxanone, violet
NON-ABSORBABLE
CHIRAFLON monofil
CHIRALEN monofil
SILON monofil
TERVALON braided
SILON / ORSILON braided
SILK braided
Description
PVDF (similar to Teflon), blue
Polypropylene, blue
Polyamide-6 or 6/6, blue
Polyester, green
Polyamide, white
Coated with silicone, black
Chiralen meshes
Capromeshes
non-absorbable
partially absorbable
CHIRLAC braided
CHIRLAC rapid braided
47
CONTACTS
CHIRONAX-DIZ spol. s r.o.
CHIRONAX-DIZ spol. s r.o., V Korytech 23, CZ 106 00 Praha 10
tel.: +420 272 769 891, fax: +420 272 766 807
e-mail: chironax-diz@volny.cz
www.chironax-diz.cz
Chironax-Diz Co. Ltd. is the successor company – firm after n. u. CHIRANA
OTS, which was established in 1953 as the greatest deliverer, firm of sanitary
technology in Czechoslowakia and had set up in business practically all
sanitary organizations at contemporary export to the states of Eastblock and
so called Third countries.
The contemporary undertaking CHIRONAX-DIZ is engaged in this branch
already 10 years and in the latest time has shared on the building of great
sanitary integrities, first af all in the Czech Republic. The undertaking disposes
in the branch of sanitary technology with qualified specialists and cooperates
at the building with trustworthy partner firms. It ensures the new building
and reconstruction of sanitary arrangements in the whole extent, i. e. from
the project over the deliveries, training of attendance, assembly, coordinate
activity to the advising. The yearly average turnover at 30 employed persons
is 150 mil. Kc.
PRODUCT RANGE:
In the last three years have been ensured - except others - the decisive
actions;
• Central military hospital – pavilion CH 1, pavilion B III
• State hospital Trutnov – pavilion biochemestry
• Pavilion gyn-obstetrics
• FH Motol – stage VII and VIII
• Hospital with policlinic Trebíc – more useful pavilion
• Policlinic MO and GŠ Prague
• Military treatment institution Karlovy Vary
• District institution of social services Prague 7 and additional.
48
CONTACTS
Ing. Jan Turek
Ing. Jan Turek, Krátká 192, CZ 391 37 Chotoviny,
Branch: Táborská 195, CZ 391 37 Chotoviny
tel.: +420 605 151 379 (Ing. J. Turek - executive), +420 380 427 217 (office)
e-mail: janturekzt@seznam.cz, janturek@tiscali.cz
www.janturek.cz
About us
We are a South Bohemian company, based near the town of Tabor. Our beginnings
date back to 1993.
We manufacture equipment for health care, mainly for physiotherapy, however we
are active in other disciplines as well (e.g. gynecology). Greater development of the
company occurred in 2008. We have moved into new production facility, began
to develop new products and managed to multiply the volume of our production.
We are capable to manufacture equipment for our customers according to their
wishes and requirements. We always strive to provide the best quality at the best
price to our customers.
Services
Besides the development and manufacture of our own products, we also do custom
manufacturing. We are capable to design and manufacture equipment according
to your requirements.
Our services:
•
•
•
•
custom metal works (cutting, machining, welding, etc.)
surface treatment (we provide painting, electroplating etc.)
service and repair of machinery and equipment
designing and engineering
(workshop drawings for both existing and new equipment)
We always strive to provide the best quality at the best price to our customers.
Products:
•
•
•
•
•
•
Universal multi-purpose chair
Universal veterinary table - 1300 VET
Universal gynecological examination chair - GYNO 1
Universal gynecological examination chair - GYNO 2
Dog grooming table
Universal gynecological examination chair - GYNO 4
49
CONTACTS
ING corporation, spol. s r.o.
ING corporation, spol. s r.o., Dr. Jánského 3238, CZ 738 01 Frýdek-Místek
tel.: +420 558 663 215, fax: +420 588 663 217
e-mail: info@ingcorporation.cz
www.ingcorporation.cz
ING corporation, spol. s r.o. is involved in a research, development, service,
application and sale of medical devices in the field of prosthetics and orthotics.
ING corporation, spol. s r.o. was founded as a family owned company in 1991. Our
company is a continually developing dynamic team with open and new ideas. We
believe in carefully listening to our customer’s wishes and finding solutions. We
work at bringing about our customer’s respect and satisfaction through a friendly
atmosphere. Our goal is to provide high quality products and services.
We are focused on modern approaches to design, production, application and
distribution:
• Quality (ISO 9001:2000 Certificate)
• Teamwork with universities and hospitals
• Application of CAD/CAM methods by the design and development of medical
devices
Our products have been awarded prizes at the Rehaprotex and HospiMedica trade
fairs in Brno. We have also been recipient of the Good Design Award from Design
Centrum, Czech Republic.
Range of products and activities:
• Lower limb prosthetic modular components
• Spinal and modular limb orthotic systems
• Silicone prostheses of missing body parts
• Foot orthoses
• Diagnostic and measurement devices
• Organisation of professional trainings and seminars
50
CONTACTS
INPARTNERS GROUP
INPARTNERS GROUP, Lidická 51, CZ 602 00 Brno
tel.: +420 541 247 251, +420 541 233 816, fax: +420 541 247 251
e-mail: kendereski@inpartners.cz, info@inpartners.cz
www.inpartners.cz
INPARTNERS GROUP is a network of mutually collaborating independent Czech and Slovak patent attorneys and advocates
with long-time practice.
INPARTNERS GROUP renders complete legal and professional services, especially for business subjects, in the field of intellectual
property, commercial, civil, labour, family and criminal law. The services are provided in foreign languages as well.
The firm is fully qualified to file particularly patents, utility models, industrial designs, trademarks, geographic denominations,
appellations of origin, lay-out designs of electronic circuits, and also any pleading considering unfair competition and copyright.
It can carry out patent and trademark searches in national or international databases as well as searches of available literature.
It can also provide the qualified representation before the Industrial Property Office of the Czech Republic (UPV), World
Intellectual Property Organization (WIPO), European Patent Office (EPO), Office for Harmonization in the Internal Market
(OHIM) and other relevant authorities. The firm is also able to provide the qualified representation before courts, particularly
in the field of both the civil and administrative proceedings. The members take part in the professional meetings and work in
various associations involved in the protection of industrial property both in the Czech Republic and abroad.
INPARTNERS GROUP also provides trainings in the field of business protection and development of intellectual property.
Patent and Law agency
51
CONTACTS
JIVA - Jirák, spol. s r.o.
JIVA - Jirák, spol. s r.o., Vestec u Prahy 170, CZ 252 42 Jesenice
tel.: +420 241 932 073, +420 241 932 269, +420 241 931 828,
+420 241 931 965, +420 602 309 497, +420 602 309 498
e-mail: info@jiva.cz
CONTACTS
www.jiva.cz
Manufacturer of stainless steel equipment for health
service establishments and catering industry.
Founded in 1935.
The Czech family firm JIVA JIRÁK is one of the largest
companies in this branch in the Czech Republic.
Technological processes used in the manufacture
are based on the most advanced technologies
implemented on top-level machinery and operated by
a highly qualified staff trained at foreign companies.
All products are made of high-quality stainless steel
and meet the European public-health standards.
The company‘s products are characterised by the high
quality and its name has earned a very good reputation
on the domestic and foreign markets, which is the
trend that we are trying to maintain and develop.
All products that we offer are made of high-quality
stainless steel materials with required certificates and documents. The material
used in the production is composed of foreign-made stainless steel sheets
18/8 Cr/Ni /17240 and 17241/ of top-level quality.
It is non-magnetic sheet metal specially designed to be used in the health service
establishments and food industry, and thus having the required certificates. Since
2002 the company has been in possession of the Quality Management System
certificate ISO CSN EN 9001:2001, and since 2003 it has been a holder of the
National Security Authority certificate entitled “Reserved“, 1st grade, which
enables the company to implement orders for the Army of the Czech Republic.
Owners of comapny:
Ladislav Jirák, Václav Jirák Jr., Václav Jirák
(from the left)
Product range for the health service establishments
• Wide range of stainless steel furniture for health service facilities
• Equipment for hot and neutral meals delivery
• Stainless steel furniture for sterilisation departments
• Atypical stainless steel equipment
52
Klaro, spol. s r.o.
Klaro, spol. s r.o., Podolská 103/126, CZ 147 00 Praha 4
tel./fax: +420 241 431 266, +420 241 431 253
e-mail: klaro@klaro.cz
www.klaro.cz
KLARO limited company is the Czech leading producer of cleaning and operating
trolleys including the complete selection of accessories.
At the time of its foundation in the year 1993 the company started its production
by manufacturing of two sorts of simple operating trolleys. At present time, the
company makes several product series of trolleys which involve more than one
hundred basic sorts and several variant solutions. Thus the company nowadays
supplies the market with healthcare, hotel and cleaning trolleys including the
complete selection of stainless trolleys, trolleys for restaurants, laundries or
warehouses. Original approach of the frame solving of the trolleys thus unables
the potential customer with the help of modular parts to combine the single parts
or the whole minor structures together and to create from the basic sort of trolley
the one, which matches its service, capacity or aesthetic needs.
Except the original trolley frames, the company KLARO limited takes pride in top
quality of its products together with fast and flexible response to customer needs.
If in the year of the company’s foundation the production was made with the
help of basic machinery equipment, nowadays the company disposes of the
top technology equipment, which together with the emphasis on use of quality
materials, modern methods of management control and teamwork of highly
professional workers unables the company to place on the market the pruducts of
exceptional high quality with high utility value for the final customer. This strategy
unabled the company KLARO limited to become within a few years not only one
of the most significant suppliers of operating trolleys on the Czech market, but in
the last few years also to become an important exporter of its products to many
countries within the European Union and outside it.
KLARO limited company is producer of healthcare, stainless, hotel, operating
and cleaning trolleys.
53
CONTACTS
Klášterní officína
Ing. Marek Motyčka - Klášterní officína, Bezručova čtvrť 1115, Kuřim 664 34
tel.: +420 776 767 020, +420 776 565 309
e-mail: info@klasterofficina.cz
www.klasterofficina.cz
History
The company Ing. Marek Motyčka - Klášterní officína was established in 2000. In
the beginning was mainly the cultivation of medicinal herbs. Then, the company
focused on the production and processing of herbs herbal supplements. The
company wants to build on the tradition of medieval monastic pharmacies. Its
aim is rediscovering forgotten recipes and financial support restoration of an
important cultural and spiritual center of the Benedictine monastery in Rajhrad
u Brna.
Benedictine order is the oldest organized religious communities in Western
Europe, which was founded in the year 529 by the St. Benedict. The first mention
of the Benedictine monastery in Rajhrad u Brna dates from 1045. Hitherto, the
only remaining nestarším a Benedictine monastery in Moravia.
In 1465 the vineyards were founded and subsequently Cellars. From the 14th
century. in the monastery begins to boil beer. The monks take care of the “Garden
of Eden” with the planting of medicinal plants, which the brothers received the
manufacture of medicinal liquors, elixirs, tinctures, salves and herbal teas.
Centuries of experience with natural resources and have given rise to a harmonized
proven recipes that are beneficial to humans today’s “hectic rush”
Main Products: Herbal syrups
All of our herbal syrups are registered as food supplements. Herbal syrups are
currently manufactured in 45 species. They are sweeten with fructose . Fructose is
also intended for diabetics, as it is a simple sugars - easily digestible. I’m sure you
know Echinacea, Plantain or Buckthorn. These herbs can be found in our products.
Our other products
•
•
•
•
Herbal Liqueurs.
Herbal drops.
Herbal cosmetics.
Jam with fruits and herbs.
54
CONTACTS
Komora zubních techniků ČR, (KZT)
Komora zubních techniků ČR, Ostrovského 253/3, CZ 150 00 Praha 5
tel.: +420 224 213 168, +420 602 224 298, fax: +420 224 213 168
e-mail: sekretariat@komorazt.cz
www.komorazt.cz
The Chamber of dental technicians in the Czech Republic is a
professional, non-profit, voluntary, non-political civic association
with legal standing. It is open to all dental technicians and
assistants of dental technicians.
The Chamber of dental technicians supports the profession of
dental technicians and the operating standards in accordance
with the general binding regulations and ethics.
It supports the legitimate professional interests of its members by
making legislative proposals relating to the industry and business
conditions within the industry and profession.
It advises on the rules of its members for conducting business, to
meet the standards for the operation of dental laboratories.
It mediates on technical issues that have become controversial
for some reason between dental laboratories and third parties.
It provides information in support of raising the skills of members
and in the development field and if necessary can provide an
expert in the field of dental technology.
55
CONTACTS
KOVONAX spol. s r.o.
KOVONAX spol. s r.o., Sušilova 477, CZ 768 61 Bystřice pod Hostýnem
tel.: +420 573 378 379 (306), fax: +420 573 378 311
e-mail: kovonax@knet.cz
www.kovonax.cz
The firm has had more than Hundred Years tradition and it
was established in 1908 at Bystřice pod Hostýnem. Kovonax
is a prominent Czech producer of furniture for medical and
solicitous establishments.
The main object is to achieve maximal satisfaction of the
patient as well as of the attending personnel.
The firm has had a long established quality system
conformable with ČSN EN ISO 9001:2001 a ČSN EN ISO
13485:2012.
Products of the company KOVONAX serve patients and
personnel not only in many countries of European Union but
also in Russia, Belorussia, Ukraine, Kazakhstan and Moldavia.
•
•
•
•
•
•
Hospital beds
Beds for solicitous establishments
Hospital furniture
Mattresses decubitus
Accessories for beds
Sitting furniture
56
CONTACTS
LabMediaServis, s.r.o.
LabMediaServis, s.r.o. , Národní 84, CZ 551 01 Jaroměř
tel./fax: +420 491 810 090
e-mail.: paprskar@labmediaservis.cz
www.labmediaservis.cz
Why buy prepared media?
• Quality culture medium as the corner stone of a good diagnosis
• Batch reproducibility – validation of the production method, guarantee
of the composition, temperature, timing, volume etc.
• Top quality control – each batch undergoes a series of tests of the
sterility, celectivity and growth properities
Why buy from LMS?
• Advanced technology in a new complex equipped with HEPA filters
• Our own ram herd, low price of the input material, low sell price
• Possibility of custom made products – based on your recipe, ingredients
of different companies, in tune with your workspace
• Short-notice work – in cas of an urgent need we’re able to provide the
medium in 24 to 48 hours
Why LabMediaServis?
• Production of brand new batches, higher colony-growth dynamics
• ISO 9001, 14001 and 13485 on production of culture media and blood
derivates
• Quality certificate, media index, protocol of the tests run and a user
manual come with each product
Production method
• Weighing of the dehydrated medium
• pH check
• Filling the preparator
• Temperature selection
• Adding blood, supplements, antibiotics
• Connecting with the batching machine
• Batching
• Drying
• Tests, check
• Packing
• Stroing and transporting
• Producer and distributor of culture media
57
CONTACTS
LASAK s.r.o.
LASAK s.r.o., Českobrodská 1047/46, CZ 190 01 Praha 9 – Hloubětín
tel.: +420 224 315 663, +420 233 324 280, fax: +420 224 316 051
e-mail: export@lasak.cz
www.lasak.com
LASAK Ltd. is a research-oriented medical technology company,
established in 1991 in Prague, Czech Republic. The mission of
the company is the development, production and sale of medical
devices.
Currently LASAK is one of the leading Czech companies in the field
of dental implantology and bone tissue regeneration.
Since 1992, the research and development of bioactive materials
for bone-tissue replacement has been carried out systematically
at LASAK in cooperation with universities, research institutes
and major clinics in the Czech Republic and abroad. Results of
the research have then been used in the development of new
products, which successfully entered the market. These products
are now widely used in clinical practice, especially in the fields
of dental implantology, maxillofacial surgery, orthopedics,
neurosurgery, as well as in other fields. An important product
line consists of resorbable and nonresorbable materials for bone
regeneration based on calcium phosphates (e.g. PORESORB®-TCP,
OssaBase®-HA). Significant progress has been achieved by the
development of surface-treated bioactive titanium, which exhibits
unique properties enabling faster, safer and more predictable
implant healing.
This new biomaterial has been successfully used in the production
of dental (IMPLADENT® and BioniQ®) and spinal (IMPLASPIN)
titanium implants.
The development results and clinical evaluations are widely
documented in a number of research and clinical studies published
in professional journals, conference proceedings and monographs.
•
•
•
•
Dental Implantology
Neurosurgery
Bone Regeneration
The 20-year history of LASAK is one of creative,
tenacious people – people helping clinicians and
patients apply technology to achieve new levels of
treatment success and quality of life
58
CONTACTS
LINET spol. s r.o.
LINET spol. s r.o., Želevčice 5, CZ 274 01 Slaný
tel.: +420 312 576 111, fax: +420 312 522 668
e-mail: info@linet.cz
www.linet.com
LINET spol. s.r.o. is a leading global manufacturer and distributor of beds for
hospital and nursing-care settings. The company was founded in 1990 by
Zbyněk Frolík; its manufacturing facilities and corporate headquarters are
located in Želevčice u Slaného, Czech Republic. Annual production capacity
is 80,000 beds, over 90 percent of which is exported to more than 100
countries around the world.
In addition to beds for hospital and nursing-care settings, LINET also
manufactures passive and active systems for the prevention and treatment
of pressure ulcers, as well as hospital furniture and mobiliary. The
company’s product portfolio is rounded out with a sophisticated offering
of comprehensive services, including educational and training activities for
caregivers, an advanced system for monitoring the technical status of beds,
and consultancy in the interior design of clinics and patient rooms.
LINET is a technological leader in its field. Thanks to its intensive
collaboration with healthcare professionals, the company regularly unveils
innovative solutions that contribute to a greater level of comfort and
safety for patients and caregivers alike. By integrating unique features and
functions with outstanding design, LINET has forged a path to success in
international markets.
In 2011, the owners of LINET, together with their longstanding strategic
partner Wissner-Bosserhoff GmbH, a German manufacturer of nursing care
beds, established the holding LINET Group SE. Today, the holding employs
approximately 900 people in the Czech Republic, Germany, Belgium,
Holland, France, Italy, Spain, Great Britain, Sweden, Russia, the USA, Mexico,
Brazil, and China. Thanks to its extensive distribution network, LINET Group
SE has also launched successful undertakings in other markets in South
America, Africa, the Middle East, and India. With an annual production
capacity of 120,000 beds is LINET Group SE the European market leader.
Product portfolio:
• Intensive care beds
• Universal hospital beds
• Hospital furniture
• Social care beds
• Home care beds
• Pressure sore mattresses
• Social and nursing home furniture
• Hospital and social care equipment
59
CONTACTS
Martek Medical a.s.
Martek Medical a.s., U Spalovny 4582/17, CZ 796 01 Prostějov
tel.: +420 582 400 000, fax: +420 582 400 001
e-mail: info@mme.agel.cz
http://martekmedical.agel.cz
The key business activities of the Martek Medical a.s. company
include comprehensive solutions with regard to the sale of healthcare
consumables, paper programme, detergents and disinfectants, as well
as the sale of special healthcare materials to healthcare facilities in the
Czech Republic. Thanks to its stable and strong partner – the AGEL group
– and extensive distribution network, the Martek Medical a.s. company
has become Czech and Central European leader with regard to selected
commodities.
The quality of the company’s products, processes and services is proved
and documented through three significant certificates. In June 2006
the company successfully passed the ISO 9001 certification process
which addresses quality management systems. In addition, the company
was awarded in 2007 the ISO 14001 certificate on the environmental
management system and the OHSAS 18 001 certificate on the
occupational health and safety management system. Having combined
the three aforementioned certificates, the company implemented
an integrated management system, which is subject to periodical
recertification – allowing the Martek Medical a.s. company to offer the
highest standards of quality of its products, processes and services.
We strive for the continuous growth of the company, continuous
development of products tailored to the needs of individual types
of customers, or the improvement of the position of a strong and
independent distributor of medical devices on the Czech market. This is
why a technological service department was founded in our company.
Its services include the deliveries of equipment and investment units,
thereby allowing the company to provide services with an added
value to healthcare institutions within the AGEL a.s. group as well as
to other customers of Martek Medical a.s. This department provides
post-warranty servicing and regular inspections of apparatuses through
qualified technicians and specialised servicing partners.
Martek Medical a.s. BRANCHES:
• Třinec
• Praha
• Prostějov
60
CONTACTS
MEDETRON s.r.o.
MEDETRON s.r.o., Vavrečkova 5673, 54. budova, areál Svit a.s., CZ 760 01 Zlín
tel./fax: +420 577 212 004
e-mail: obchod@medetron.cz
www.medetron.cz
MEDETRON s.r.o. was established in 1992 as a developer and producer of
modern measuring equipment for hospitals, surgeries & clinics, and other
health or social care institutions. The company is focused on the development,
production and sales of two key areas:
medical measuring systems
• urodynamic measuring systems Dynamic (for urologic, gynecologic and
pediatric examinations),
• Integrated Prenatal Care System for the diagnostics of premature labour
in high- risk pregnancies
expendable supplies for:
• urology,
• assisted reproduction,
• gynecology,
• other common purposes
The business strategy is mainly based on our own innovative solutions and their
implementation into practice. The company always works closely with doctors
and nurses on developing new products in order to fully meet the needs of
modern medical care in a functional and quality design.
For the development and production of medical diagnostic devices, our company
is certified according to Quality Management System EN ISO 9001:2008 and
EN ISO 13485:2003.
In the development and manufacturing of expendable supplies, the company
cooperates closely with the Tomas Bata University in Zlín. In the distribution
of expendable supplies, especially abroad, the company is interested in forming
relationships with new business partners.
• Urodynamic modular system
• Prenatal Care System for diagnostics of premature labour
• Expendable supplies and catheters
61
CONTACTS
MEDIATRADE s.r.o.
MEDIATRADE s.r.o., Havlíčkova 869/25, CZ 757 01 Valašské Meziříčí
tel.: +420 737 784 177, fax: +420 571 619 677
e-mail: business@mediatradecz.eu, mediatrade@volny.cz
www.mediatradecz.eu
Company MEDIATRADE Ltd.
Main focus of our company is production of external pacemakers. We are
successfully delivering our products for more than 20 years.
We are continuously improving our products with medical doctors. Based on
their requirements we are launching new lines of our pacemaker EPG 10.
EPG 10 BIPHASIC (cardiology, cardiac surgery)
EPG 10 MONOPHASIC (cardiology, cardiac surgery)
EPG 10 MULTIFOCAL - ESOPHAGEAL (cardiology, cardiac surgery)
EPG 10 NEUROSTIM (anesthesiology)
EPG 10 BIPHASIC, MONOPHASIC, MULTIFOCAL - single chamber external
pacemaker that preserves the required pulse of the patient.
EPG 10 NEUROSTIM - neurostimulator designed for blockades of the
peripheral nerves.
All our products are available at affordable prices and they fulfil all the clinical
requirements for this type of devices.
Our devices are known for reliability, long service life, easy maintenance and
also simple and safe manipulation.
Company MEDIATRADE Ltd. distributes products
for following specialties:
•
•
•
•
Cardiology
Cardiac surgery
General surgery
Operating rooms
•
•
•
•
Anesthesiology
Radiology
Gastroenterology
Neurosurgery
The creed of the company is satisfaction of the customer achieved by quality
product at affordable price, fast delivery time and quality service.
62
CONTACTS
MedFinance Magellan, s. r. o.
MedFinance Magellan, s. r. o., Šárecká 33, CZ 160 00 Praha 6
tel.: 233 931 678, fax: 233 931 677
e-mail: magellan@magellan.com.cz
www.magellan.com.cz
MedFinance Magellan s.r.o. is a financial institution which operates in the field of financial services in medical sector on the
Middle European market. Enterprise Investors that manage the biggest group of mutual funds in the Middle Europe give us the
base for capital security. The shares of our mother company Magellan S.A. are traded on the Warsaw Stock Exchange.
Exclusive groups for our financial services are health care suppliers and medical facilities.
What can be acquired using our services?
- improving business relations with hospitals by tripartite negotiations
- unblocking liability limits after maturity date and therefore increasing the client’s sales in medical facilities
- lowering the risk of late payments or non-payments
- improving cash flow
- secured planned cash flow
- by cutting the time limits you would not have to create recoverable amounts
For the time period up to 31. 1. 2012 we have prepared a special offer of guarantees, loans, factoring service and restructuring
of your liabilities towards medical facilities, especially hospitals.
What can we offer?
We offer guarantee of liabilities against medical facilities.
In case the claim was not paid, we shall pay for the hospital.
We will arrange the payment limits and conditions with each medical facility. The hospitals are given the right of choice to pay
the suppliers or to establish a long-term timetable of repayments with MedFinance Magellan.
We can offer a loan requiring the only liability – claim liability for the medical facilities.
What is common for our services ?
-
the priority is to keep good relationships between the supplier and the medical facility
minimum of formalities and quick negotiations
flexible adaptation to client’s requirements and particular business relations
security and transparency of business partnership - we guarantee that received liabilities are not rendered
every offer is custom made to a particular client and his business partners
Factoring – we will finance your sale of goods to hospitals and take over every payment related risk.
We will buy overdue claims from you.
The advantages of transferring the liabilities:
- preserving good relations with customers MedFinance Magellan does not recover liabilities but prefers conciliation with the
offer of financial services for hospitals
- most of the contracts are non-recourse based, our company takes over all the risks of not paying the liabilities
- short time period of claim payment, in the time period up to 31. 1. 2012 it is 7 days from signing a contract
- attractive price with margin from 3 % of the value of the liability, we increase the margin only in case of worse rating of a
medical facility
Do not hesitate to contact us in case you are interested!
63
CONTACTS
Medical Fair Brno, Rehaprotex
Medical Fair Brno - Central Europe / Rehaprotex
Organiser: BVV Trade Fairs Brno, Výstaviště 1, CZ 647 00 Brno
tel.: +420 541 152 818, fax: +420 541 153 067
e-mail: medicalfair@bvv.cz, rehaprotex@bvv.cz
CONTACTS
www.medicalfair.cz, www.rehaprotex.cz
MEDICAL FAIR Brno
International Fair for Medical Technology and Healthcare
REHAPROTEX
International Fair for Rehabilitation, Compensation and Prosthetics Aids
Date: 12–15 May 2015
Venue: Brno Exhibition Centre, Czech Republic
Basic information
BRNO MEDICAL FAIR and REHAPROTEX have been a traditional and important meeting place for domestic and foreign suppliers to the
providers of healthcare, rehabilitation and social care. These trade fairs are part of the “Medical Summit Brno”, when dozens of conferences,
congresses and seminars are held on a variety of specialized topics.
REHAPROTEX, which represents a wide range of compensation, prosthetic, orthopaedic and rehabilitation equipment, with services in the
field of wellness, offers for seniors and presentations of social services, does not have any competition anywhere in Central Europe.
64
MEDICAL TECHNOLOGIES CZ a.s.
MEDICAL TECHNOLOGIES CZ a.s., Radimova 2342/36, CZ 169 00 Prague 6
e-mail: sales@medictech.com
www.medictech.com, www.btlnet.com
Medical Technologies CZ a.s. is involved in the development and production of BTL
brand-name devices. The main development and production portfolio includes
products for physiotherapy, cardiology, pneumology and medical aesthetics.
Products for physical therapy include electrotherapy, lasers, ultrasounds,
magnetic therapy, pressotherapy and manufacture of couches and whirlpools.
Its cardiology segment offers a wide range of electrocardiographs, software
solutions, and products for holter monitoring. Pneumology products include a
desktop spirometer and spirometry options for ECGs. Aesthetic medicine division
offers cutting edge technologies for fat-dissolve, skin tightening, anti-cellulite
and anti-wrinkle care. The newest device of aesthetic medicine - Vanquish
-is a revolutionary non-contact Selective RF™ system for non-invasive body
contouring and fat removal treatments. The pain-free procedure with its safe
and consistent results is tailored to modern clinical practice needs.
With over 20 years of experience in design and manufacturing of medical
equipment, the company offers the most advanced technology available in
physical therapy. The products are supplied to more than 100 countries. The
major markets include Europe, United States and East Asian markets. For more
information, please check BTL corporate website at www.btlnet.com.
The products have been ISO and CE certified, and many of them cleared by US
FDA, as well as by number of other regulatory bodies. It is innovative nature
of the company, drive and determination of its employees that make BTL fast
growing company.
•
•
•
•
•
Physiotherapy
Shockwave therapy
Cardiology
Pneumology
Medical aesthetics
65
CONTACTS
MEDILA s.r.o.
MEDILA s.r.o., Dominikánská 25/14, CZ 301 00 Plzeň
tel.: +420 377 242 209, fax: +420 377 242 209
e-mail: obchod@medila-plzen.cz
www.medila.eu
The company Medila is the exclusive distributor of the latest technology in cosmetic
medicine, physiotherapy and balneology. In the specialized workshop and beauty
salon in the center of the city Pilsen, they introduce all its product offerings. The
main products distributed by Medila is an ultrasonic cavitation with vacuum massage
VaCaVITE Prestige, a successful device for easy removal of body fat after just one use.
Among other products for cosmetic medicine include lymphatic drainage, pulsed
light, radiofrequency, and more. In the field of balneology is a novelty Ocean de Luxe
PC, modern whirlpool tub with a touch screen controlled by Windows system. The
company Medila also sell medical supplies and ultimately provides maintenance and
servis of all medical devices.
66
CONTACTS
MEDIN, a.s.
MEDIN, a.s., Vlachovická 619, CZ 592 31 Nové Město na Moravě
tel.: +420 566 684 336, fax: +420 566 684 385
e-mail: export@medin.cz
www.medin.eu
MEDIN is the biggest Czech producer of humane-medicine implants and instruments.
The complete offer includes solution for all main medical fields, esp. implants for
traumatology, dental instruments, both rotary and surgery, and surgical instruments.
A long-standing tradition of medical instruments production, founded as early as
1949, has established a know-how that enables us to take a leading position in the
Czech market and also to compete successfully with foreign producers.
Satisfied customers that have chosen our company with expectation of fulfilling
their wishes and needs are our highest priority. As a means to the customers
satisfaction we choose quality that is above all of the other criterions and it is
a main condition of the competitiveness.
To meet the customers´ demands we use the quality system corresponding with
provisions of the ČSN EN ISO 9001 international standard and also ČSN EN ISO
13485 for medical devices. In the area of environment protection, the compliance
with international norm ČSN EN ISO 14001 Systems of Environment Management
is ensured.
According to the legal standards for the product distribution either to abroad or
to the local territories, there are all the processes prepared for their fulfilment. We
are authorized to mark our products by international marks of the Czech Republic,
Russia and Ukraine and also by the CE Conformity mark.
Traumatology
• bone screws
• plates
• angularly stable plates
• small-implants for bone
fragments fixation
• nails
• dynamic hip and condylar
screws
• implants for acetabular
protrusion
• reconstruction of ligaments
• instruments for traumatology
Dentistry
• dental instruments
• rotary instruments
• laboratory instruments
Surgery
• diagnostics
• cutting instruments
• scissors
• forceps
• clamp-forceps
• bone rongeurs
• grasping forceps
• hook, retractors
• spatulas
• specula
• elevators
• raspatories
• spoons
• curettes
• saws, files
• chisels, mallets
• drills, burs
needles, needle holders
• probes
• trocars, suction tubes
• dilators
• special instruments
• sets
• others
67
CONTACTS
MEDIPO – ZT, s.r.o.
MEDIPO – ZT, s.r.o., Kohoutova 24, CZ 613 00 Brno
tel./fax: +420 548 525 348
e-mail: info@medipo.cz
CONTACTS
www.medipo.cz
The company MEDIPO - ZT, s.r.o. (Ltd.) was founded in 1996. In the field
of medical technology, which is the priority, the company provides for the
development, production, and service of its own products.
The MEDILIT lithotriptor is a powerful device especially designed for noninvasive removal of concrements in the kidneys and the urinary and bile ducts
using a focused shock wave. It can also be used in the urological surgery, the
therapy of Peyronie’s disease and in the treatment of various orthopaedic
conditions.
The machine is operated from the control room and the entire therapy process
is computer-controlled.
The staff is thus protected not only from the x-ray radiation but also from
the acoustic manifestations of the shock wave. The table top is motor-driven
and can be positioned multidirectionally in all three axes (x,y,z). It can be
tilted to the Trendelenburg position to facilitate the determination of the
optimum point of entry of the shock wave into the patient’s body. An x-ray
and ultrasound (optional) direction systems are available for concrement
localization. Both systems can operate in conjunction, which considerably
reduces radiation burden in continuous monitoring of the quality of
localization and of the therapeutic effect.
Paediatric vaginoscope MT 1000 with cold light source MT 2002 is designed for
easy gynecological examination of children and adults. With the vaginoscope
it is possible to see the changes on the vaginal mucous membrane and on the
cervix, or an alien body and its positioning can be seen.
Rektoskope MT 1100 is designed for basic examination in the area of rectum.
Amnioskope MT1200 enables executing of an amnion, amniotic fluid and
foetus part.
The company MEDIPO - ZT, s.r.o. has assessment of full
quality assurance system pursuant to Annex II to Directive
93/42/EHS. This quality management system is applied
to all activities, starting from the design, development,
production, and services related to the supplies and service.
68
MEDIPROGRESS, spol. s r. o.
MEDIPROGRESS, spol. s r. o., Vrbovská cesta 17, SK 921 01 Piešťany
tel.: +421 337 624 420, fax: +421 337 625 010
e-mail: mediprogress@mediprogress.sk
www.mediprogress.sk
MEDIPROGRESS, s.r.o. Piestany, SLOVAKIA was founded in 1996 and fully
expanded its activity beginning 1997. The corporation has been registered
as a Limited Company in accordance with the Slovak Commercial Law. Its
staff is formed by experienced and educated business professionals who
have been involved in foreign trade for long time, particulary export of
medical appliances. Within a short period the company has gained a status
of a reliable and fair business partner on local and foreign markets.
The main goal of MEDIPROGRESS is to provide full consulting, business
and technical services to clients buying medical equipment and materials.
For that purpose we continuously expand our own production of medical
equipment. Thanks to this we are able to supply the appropriate items to
our customers with reference to the utility function they expect under
adequate marketing and service conditions.
MEDIPROGRESS owns two production plants right now:
• Chirana Progress Piestany – production of hydrotherapy, inhalation
and X-ray diagnostic equipment
• Chiradent, s.r.o. Piestany – production of dental units and chairs
Thanks to customer-oriented marketing and sales strategy, MEDIPROGRESS
has soon gained wide range of customers since its foundation. Regular and
significant deliveries were effected and are still being realized to some of
our clients below:
•
•
•
•
•
Ministry of Health of Russian Federation
Ministry of Health of Kazakhstan
World Bank / European Bank for Reconstruction and Development
Slovak Institute for Heart and Vascular Diseases
University Hospital in Kosice, Eastern Slovakia
Main activities:
• Export and import of medical equipment
• Production of dental units, chairs
and diagnostic X-ray machines
• Supplies of disposable itmes for medical purposes
• Sale of diagnostic devices and medical electronics
• Production of physiotherapeutic tubs, rehabilitation equipment
and inhalators
• Complete supplies for hospitals, clinics and private physicians
69
CONTACTS
MEDISET-CHIRONAX s.r.o.
MEDISET-CHIRONAX s.r.o., Boženy Němcové 54, CZ 370 01 České Budějovice
tel.: +420 387 311 874-5, fax: +420 387 311 872, GSM: +420 777 126 381-2,
e-mail: info@mediset.cz
www.mediset.cz
The Company Mediset-Chironax s.r.o. has been active on the medical equipment
market for more than 17 years. In the course of this period, a stable and wellexperienced team of business and technical specialists has been established.
Mediset-Chironax s.r.o. it the holder of the QMS Certificate of Quality (ISO 9001:
2001), a member of The Association of Manufacturers and Sellers of Medical
Equipment as well as a member of the Czech Chamber of Commerce.
Our business philosophy consists in sustaining a broad range of products
showing a good use value – quality - price ratio. We have been eager to avoid
extremely cheap products, unless their advantageous price is accompanied by a
sufficient quality, use value and service support.
Most of our products are supplied to hospitals including teaching hospitals,
private clinics and health centers, health institutions run by the Ministry of
Defense and the Ministry of Interior Affairs, medical schools and medical
faculties.
The amount of our supplies to private medical practices, spas, seniors´ homes,
rehabilitation centers and the general public has also grown.
70
CONTACTS
MEDKONSULT, s. r. o.
MEDKONSULT, s. r. o., Balcárkova 1258/8, CZ 779 00 Olomouc
tel.: +420 585 414 511, +420 585 411 273, fax: +420 585 416 045
e-mail: medkonsult@medkonsult.cz
www.medkonsult.cz
Medkonsult company was founded in 1992, when the experienced developers and
doctors in urodynamics and ultrasonography gathered into specialized company.
A full range of devices for Czech and Slovak market was produced, the export
into foreign countries begun in 2005. We use a model of close cooperation with
independent distributors, some of them sell our devices as OEM products under their
own trademark (DANTEC Dynamics, BUCK Elektromedizin).
Our innovative activities are very strong thanks to direct cooperation with specialists
in hospitals as well as in private cliniques. Nowadays, the most modern electronic
components are used and our developers are able to tailor a device according to
customer´s requirements and needs. We are able to offer the widest spectrum of
equipment for urodynamics and anorectal measurement which can be connected
with imaging device (videourodynamics). It can be an X-ray videourodynamics as
well as pelvic floor ultrasonography simultaneously scanned with urodynamics or
anorectal manometry.
Unique feature is the possibility of inbuilt ultrasonographic module (B ModeoColor
Flow mapping) into our urodynamic devices and thus the possibility of complex
functional and anatomical examination of urogenital tract.
Medkonsult is also exclusive distributor of BK Medical company, the Danish producer
of high quality ultrasound systems. BK Medical is a part of Analogic corporation
and uses its unique technology for construction of excelent quality and ergonomical
systems with great price-utility ratio. The whole range of ultrasound equipment is
unique and is offered by BK Medical only.
BK Medical ultrasound systems are traditionally focused especially on urology,
surgery and interventional use. There are also speical applications as ultrasoundguided brachytherapy for which Medkonsult produces specialized steppers and other
equipment.
Recently, a new generation of BK Medical devices has been focused on radiologic/
general ultrasound application, and on obstetrics and fetal medicine or
musculoskeletal application. New field is the usage of ultrasound in anesthesiology.
Medkonsult cooperates with experienced specialists and our customers are thus
provided with specialized courses and workshops.
Medkonsult can also offer other products, developed on customers´ requests, e.g.
CondaTest systems with terminals for wireless connection for knowledge testing,
voting, e-learning activities etc.
Medkonsult offers complex diagnostic solutions, education and educational
technology. There is our branch office in Prague and Slovak Republic (Trencin).
• Development, production, sales and service of urodynamic devices
• Exclusive representative of BK Medical ultrasound systems for Czech
and Slovak republic
• ISO Certification 9001:2000, 13485:2003
• Education and training centre for doctors and medical staff
71
CONTACTS
Merci, s.r.o.
Merci, s.r.o., Hviezdoslavova 55b, CZ 627 00 Brno
tel.: +420 548 428 411, fax: +420 548 211 485
e-mail: merci@merci.cz
www.merci.cz
MERCI, s.r.o. is a production-and-trade company that employs 70 to 80 people. The
company’s scope of activities include design, manufacturing, provision and delivery
of laboratories and chemical facilities to science and research institutions, colleges
and universities, chemical and pharmaceutical industry and healthcare, and the
provision of control and service laboratories for all kinds of business sectors.
The company’s manufacturing activities are linked to research and development
activities that result in the introduction of new products and technologies to the
company’s product portfolio.
As far as design and projecting of laboratory facilities are concerned, the company
is known for its complex approach towards laboratory projects that already include
furniture, exhaust hoods, necessary laboratory technologies plus recommended
methodologies and procedures, instrumentation and the subsequent provision and
delivery of consumable supplies.
The MERCI, s.r.o. company has been a provider of laboratory equipment since 1993.
Every year the company handles several hundred successful projects of all sizes and
of various levels of significance. Furthermore, it provides professional sales services to
more than 2,000 clients. These services include sales and consultancy services. They
are provided by experienced employees who must have knowledge of, and experience
from, various business fields. The company is also an authorised service provider with
respect to the equipment and technologies the company provides.
A key milestone was the company’s decision to manufacture its own brand of specialpurpose laboratory furniture, including exhaust hoods and wall units. Since 2004
the company has been manufacturing these components in its own factory building
and it even has its own design department whose role is to prepare manufacturing
processes and to deal with research and development of new products that reflect
today’s needs and demand for working conditions in all types of laboratories, as
well as products that support the investors’ efforts to establish flexible, modern and
energy-saving facilities.
For several years now, the company has focused on the development of a modern
and energy-saving exhaust hood. The company operates its own design centre for
the purpose of design activities and technology projects. Its assets include a team of
trained experts in a broad scope of laboratory-related issues. The company cooperates
with hundreds of manufacturers of special-purpose laboratory equipment and pilot
equipment, as well as with numerous specialised Czech and foreign contractors.
The company enjoys a strong position on the Czech and Slovak markets and it also
attempts to succeed on foreign markets, in order to exploit its extensive knowledge and
expertise. Its unique approach and high level of expertise and maximum complexity
have won the company most major projects in the respective business sector. Out
of hundreds of references the company especially values the provision of equipment
for laboratories of the Masaryk University campus in Brno or for the University of
Pardubice campus; the provision of laboratory equipment for the 1st Faculty of
Medicine of Charles University in Prague, or equipment for the laboratories of the
Znojmo hospital, or equipment for service and control laboratories (and the related
harmonised methodologies) for the Hill’s company in Hustopeče, etc.
The activities of the MERCI s.r.o. company are based on extensive knowledge, the
ability to solve complex issues as a team and to absorb new trends from the area of
laboratory technologies.
The company is certificated according to the norms and quality standards OHSAS
18001:2007, ISO 9001:2000, ISO 14001:2004 and ISO 13485:2003.
72
CONTACTS
Miele, spol. s. r.o.
Miele, spol. s. r.o., Spielberk Office Center, Holandská 4, CZ 639 00 Brno
tel.: +420 543 553 111, fax: +420 543 553 119
e-mail: info@miele.cz
www.miele.cz
Messrs. Carl Miele and Reinhard Zinkann established the company Miele in 1899. At the present time the company has been
managed by the fourth generation of the family. The company
Miele manufactures top-class washing and disinfecting automatic machines for preparation of medical instrumentarium or
laboratory glass, washing and disinfecting automatic machines
of the Discher system for bedpans as well as professional laundry machines (washing machines, driers, ironing machines) and
professional dish washers.
Mechanical preparation of OP instrumentarium for laboratory
glass in washing and disinfecting automatic machines Miele
provides safe, standardized, documentable and validable course
with optimal performance and high economy. Using intensive
user – technical research and close co-operation with hygienists, OP instrumentarium manufacturers and users, the company
Miele gained leading position in the innovation market. As soon
as now, the new generation of Miele appliances meets the requirements of the international standard pr EN ISO 15883-x. Interleaved washing and disinfecting automatic machines have already been installed
in more then 40 central sterilisation stations in the Czech Republic.
The company Miele also offers washing and disinfecting automatic machines of
the Discher system for bedpans, ducks, stool bowls, chamber pots for children and
kidney-shaped bowls. The machines are used mainly in hospitals, rest homes, social
care institutes, etc.
In the sphere of professional care for textile, the company Miele offers professional
automatic washing machines with capacity of 5,5 up to 32 kg of wash, optimally
completed with professional driers and ironing machines. The absolute top-class
section of the production program for laundry appliances Miele includes automatic
washing machines with capacity of 10 – 32 kg with freely programmable control
unit Profitronic M, being also produced with the capacity of 24 and 32 kg – the
hygienic interleaved variant for hospital and institutional laundries.
In the field of dish washing, the company Miele offers professional dish washers
with fresh water intake system for each washing stage as well as tank dish washers
with hot water reservoir.
Produc on program
• Single-door or interleaved washing and disinfec ng automa c
machines for prepara on of OP instrumentarium or laboratory
glass
• Washing and disinfec ng automa c machines for bedpans, ducks,
stool bowls, chamber pots for children and kidney-shaped bowls
• Professional automa c washing machines, driers and ironing
machines for industrial and hospital laundries
• Professional dish washers with thermic disinfec on
73
CONTACTS
MORAMEDICA SE
MORAMEDICA SE, Martinický palác,
Hradčanské náměstí 67/8, CZ 118 00 Praha 1 - Hradčany
GSM: +420 724 241 575, +420 724 090 009, fax: +420 227 077 187
e-mail: info@moramedica.cz
www.moramedica.cz
Company Profile
The European company MORAMEDICA SE was established as a
trading and manufacturing company at the beginning of 2010. The
company is based on purely Czech capital.
MORAMEDICA SE company gained exclusive representation of
leading domestic and foreign producers of medical devices in the
Czech and Slovak Republics. MORAMEDICA SE also implements
built-in clean rooms and delivers even the complete medical
facilities. We have developed our own comprehensive program of
the mobile medical facilities.
Thanks to cooperation with financial institutions our company
provides its customers an opportunity of the supply funding.
Basic offer
• Supply of clean rooms
• Opera ng and examina on lights
• Distribu on systems of medicinal gases
• Opera ng tables
• Pa ent trolley and surgery trolley systems
• Anesthesia equipment
• Lung ven lators
• Pa ent transport trolleys
• Stretchers
• Medical carts
• An -decubitus program
• Consumable supplies
• Nanotechnology with a focus on products with
an bacterial,fungicidal and virucidal effects
• Stainless steel furniture and medical facili es
equipment
• Filtering systems for medical facili es
• Assembly works related to the supply of medical
facili es
• Deliveries of small medical units
• Consul ng and advisory services in construc on and
equipping of health facili es
74
CONTACTS
MTE spol. s r.o.
MTE spol. s r.o., Hybešova 43, CZ 620 00, Brno
tel.: +420 543 432 400, fax: +420 543 432 405
e-mail: mte@mte.cz
www.mte.cz
www.inzulinova-pumpa.cz
MTE Ltd. is a modern, dynamic company, dealing from 1991 with
development and distribution of medical aids for diabetic patients
and patients with vessel disorders. During its long-lasting existence
it became one of the leaders in distribution of medical aids for
diabetics and became one of the biggest companies operating in the
area of specialised distribution in the Czech Republic.
The main activity of MTE company is a reliable distribution of
our products in the pharmacies, medical aids shops, hospitals,
ordinations, to patients and also marketing support of these
products. The companies and products, which we represent in the
Czech Republic, are of top quality in their areas (Johnson & Johnson
- division LifeScan, Roche, Abbott, Bata, Bio-Rad, Loana, Eli Lilly,
Novo Nordisk, SOOIL).
MTE company deals also with development of medical aids. Among
our own product, e.g. one of the first glucometers in the Czech market
or pen for capillary blood sample taking from fingertip can be found.
At present, we produce very popular diabetic socks Diacomfort.
MTE also - except of development and distribution of certain
products - runs a shop of medical aids and pharmacy, which both
offer complete assortment of remedies, food supplements, cosmetics
and medical aids for patients at attractive conditions.
More informa on you can find on websites:
www.mte.cz
www.inzulinova-pumpa.cz
75
CONTACTS
M.T.Z. s.r.o.
M.T.Z. s.r.o., Koněvova 19, CZ 130 00 Praha 3
tel.: +420 724 890 808, fax: +420 222 582 010
e-mail: info@mtzcz.com
www.mtzcz.com
M.T.Z. Ltd. Is a Czech company its main activity is export of medical
equipments and supplies to Iraq. The company was founded in
2010 and now is planing to manufacture selected and necessary
materials for healthcare for export. M.T.Z. Ltd is registered in the
Ministry of Health in Iraq, wher is cooperating with its sister
company “Aldaman Alhandasi” to secure marketing and service
activities and preparing offers for private and regional demand.
Our other cooperation is with “Medical Solutions Scientific
Bureau” to secure the public and state tender agenda.
In Iraq we are home and active in the market since 2003. Our
company has a large team of professionals covering entire the
country and especially the capital city Baghdad and the southern
provinces of the country. Our motto is to provide the best service
and after-sales service. Now we can consider M.T.Z. Ltd. as one of
leading Czech provider of medical technology to Iraq.
It is also important to note that due to demand in the Iraqi market,
M.T.Z. Ltd. expanded its objectives and established three of its
subsidiaries in the Czech Republic, which are active in other fields
such as construction, energy and general trade (MZ Construction
Ltd., MT Energy Services Ltd., TM General Trading Ltd.).
76
CONTACTS
MZ Liberec, a.s.
MZ Liberec, a.s., U Nisy 362/6, CZ 460 01 Liberec 3
tel.: +420 488 040 111, fax: +420 488 040 326
e-mail: info@mzliberec.cz, export@mzliberec.cz
CONTACTS
www.mzliberec.cz
We are Czech private company having a long-term
manufacture experience since 1958.
We are focusing our production scope on installation of final
elements to medical gas distribution systems, including gas
sources, gas pipeline network and medgas power supply
units. We also produce lights and spring balance arm systems
being able to carry any lights, cameras, monitors, touch scren
panels and other medical equipment.
We offer all-inclusive options like project engineering study,
interior design, build-up, manufacture, final assembly on-site
as well as after-sale services.
We have strong and flexible team of designers-engineers who
are able to provide a full customized solution.
We comply international directives and rules related to medical
devices concerned and medical gas distribution system.
We use first-class materials and apply latest technology in
production processing, which contributes to a protection of
environment.
We provide all-in-one assistance to our customers through
authorized dealers located on-site.
75 Pct of our products are exported to about 40 countries
worldwide.
We are reliable and long-term partner for healthcare
professionals worldwide.
Duo ceiling pendant solution within operation theatre
PRODUCT PORTFOLIO:
• Bed head units
• Ceiling pendants
• Medical beams
• Supply columns
• Spring balanced arm system
• Surgical lights
• Medical gas source sta ons
• Gas distribu on elements, accessories
Bed Head Unit - children´s option (RN07-DN3)
Star Light 160 with camera and arm system SPR-11 Duo
Production facility and R&D center since 2013
77
NanoTrade s.r.o.
NanoTrade s.r.o., Mozartova 178/12, CZ 779 00 Olomouc
office: Polská 48a, CZ 779 00 Olomouc
tel./fax: +420 585 221089
e-mail: info@nanotrade.cz
www.nanotrade.cz, www.nanosilver.eu
Czech innovative company specialized in applied R&D
of technology, materials and commercial products
which use the nanotechnology. Our core business are
products and technology with Antibacterial effects
and Material surface treatment. The representatives
of our traditional products are products with our brand
name nanosilver® both textiles (clothes, fabrics, filters)
as well as intermediates and products from polymers
(packaging, foils, plates) or healthcare products (gels,
oitments, desinfectants, protective devices for wound
healing).
Thanks to the support and close cooperation with
research institutes in the Czech Republic, EU, USA
and Asia we have been operating in a practical test,
but even in its applied development samples of new
materials, technology and application processes at all
levels. These activities are also completed by laboratory
and practical testings, certifications and appovals.
The complexity of our services in the field of
nanotechnology is supplemented by providing of new materials, marketing and
market analysis, technology transfer preparation and realization, consultation and
advice.
Furthermore, we organise technical seminars for experts from R&D, OEM´s and
manufacturers. Our company is also co-founder of the Czech Nanotechnology Cluster
and member of CSNMT (the Czech Association for new Materials and Technology)
and brings these links to the projects. Company is active in range of research of
commercial projects in the Czech Republic. Other activities of the company in the
area of nanotechnology deal with providing new materials, marketing and analyses,
defining and preparing projects, application implementation, defining manufacturing
processes, relevant marketing, consultation services and trading activity in
nanotechnology products.
• Func onal tex le clothing with an bacterial effect with
the brand nanosilver®
• Veterinary applica on for wound healing with the
brand TraumaPet®
• Paints and technology for surface treatment with
bacterial, fungi and virus protec on
• Technology for clean rooms and material protec on
(nanosilver® and NanoDEO)
78
CONTACTS
ORTEX spol. s r.o.
ORTEX spol. s r.o., L. Váchy 173, CZ 760 01 Zlín
tel.: +420 577 011 272-4, fax: +420 577 011 275
e-mail: ortexzlin@ortexzlin.cz
www.ortexzlin.cz
An effective tool for treatment of damaged joints and ligaments
The company was founded in1990. Since the beginning of its existence it targeted
on highly professional and quality service in the production and deliveries of braces
designed for post-operative and conservative treatment of damaged joints and
ligaments.
During the production we are permanently cooperating with head doctors of clinic
departments and also with relevant institutions abroad. The range of products is
being constantly enlarged with new products. ORTEX products are also used for the
first treatment of injuries in emergency rooms of surgeries, orthopedic departments
and traumatology centers. The company is certified in the quality management
system in compliance with EN ISO 9001:2008 EN ISO 13485:2003.
The products are tested in clinics before their launching on the market. During
its existence the company became famous worldwide in its field. The products
correspond with all requirements of technical and hygienic norms and the materials
used guarantee to patients comfort even in climatically demanding conditions, while
not irritating even the sensitive skin. One of major activities of the company Ortex,
Ltd. is the export. We offer not only our own range of products for exportation, but
also production of braces according to special requests of clients. At the moment the
company is successful not only in Europe, but also in Russian Federation, Asia and
the Balkans.
The good quality of products, constant enlarging of the product range and markets
offer good guarantee for next development of the company.
• Development, modern design and series production of braces
used for treatment after injuries of joints and ligaments for
conservative and post-operative treatment, as well as for
rehabilitation
• Products sales
79
CONTACTS
Parabel s.r.o.
Parabel s.r.o., Padělky 192, CZ 763 17 Lukov
tel.: +420 577 112 060, fax: +420 577 911 505
e-mail: info@parabel.cz
www.parabel.cz
The company Parabel was founded in 1996 as a limited
liability company. In the course of development the
company split up into two divisions. One division
occupies with production of engineering products
from metal, rubber, plastics and their combinations.
The second division products medical means. The main
activity of this division is development, construction,
production and a service of medical means as a
customer wishes. We are able to work out an optimal
offer of our products according to designs, models and
producing materials of our customers.
We assume complite realization of commission from
a demand to delivery at a place of destination. The
clarification of technical details is a matter of course
for us, as well as a permament careful inspection of
quality during the whole production process. Nowadays,
we occupy ourselves with the development of system
which enables to carry out effective locomotory
therapy in rehabilitation centres or at home.
Our effort is to help the patients who have lower ability of walking or stopped
walking after a disease or an accident. We try to improve this ability and to provide
a system which is user-friendly for both patients and therapists.
All types of medical means are produced in accordance with European regulations
and are certificated by CE certificates. The majority of our production is heading for
export. The priority aim for us is satisfaction of customers with who we comunicate
actively and their knowledge are used for next development and modernization of
products.
We deepen this connection by regular exhibitions of our products at selected trade
fairs and using sales representatives.
The company Parabel Ltd holds certificates ISO 9001:2008 and ISO 13 485:2003
80
CONTACTS
PATRON Bohemia a.s.
PATRON Bohemia a.s., Českolipská 3419, CZ 276 01 Mělník
tel.: +420 315 630 111, fax: +420 315 630 199
e-mail: info.en@patron.eu
www.patron.eu
Company PATRON was established in 1995, in the town Melnik (35 km north from
Prague). Melnik-region is very well known as the traditional place of baby and
rehab equipment production. Thanks to the gradual and fast development the
company right now consists of 2 divisions - Division REHA, Division BABY, with its
own production facility and extensive distribution network covering more than 40
countries around the world.
Division REHA - belongs to the major wholesaler and suppliers of specialized medical
equipment (medical devices) in the Czech Republic. PATRON belongs to the major
middle European manufacturers of rehabilitation equipment and medical devices.
All products of company PATRON Bohemia a.s. fulfilled all legally requested standards
and conditions, as well as widely requested EC Council Directive regulations. The
company is ISO 9001:2008 certified. Design and production is focused to the high
technical level of products, high level and fully functional design, high level of
quality and especially good flexibility in combination of orders according to the
customer’s requests.
Thanks to the high quality and technical level of our products we have been awarded
by number of prices on the shows and exhibitions.
We co-operate with the best specialists of those branches from the whole Czech
Republic and from foreign countries as well for many years. Those achieved awards
and high interest in our new products persuade us about the right direction of our
development. Our competition ability is based on the competitive price / use value
ratio, high level and fully functional design, high level of quality and especially good
flexibility in combination of orders according to the customer’s requests.
Product range:
• Wide range of multipurpose, fully foldable rehab-buggies
• Wide range of multipurpose, fully foldable rehab-strollers
• Wide variety of fixation and positioning accessories for buggies
and strollers
• Paediatric manual wheelchairs, standard and customized manual
wheelchairs
• Foldable wheelchairs
• Walkers, rollators, toilet and bath aids, and other items ...
81
CONTACTS
Paultech s.r.o.
Paultech s.r.o., Vinařská 6, CZ 603 00 Brno
GSM: +420 721 108 108
E-mail: office@paultech.cz
www.paultech.cz
Supplier of medical technologies and equipment
The Czech company PAULTECH s.r.o. is an authorized distributor of a wide range
of medical technologies and equipment. PAULTECH s.r.o. is a company based in
the Czech Republic and owned by Czech owners. The company’s focus is solely on
medical supplies.
Our offer includes:
• Modular operating theatres
• Ambulance cars
• Multipurpose operating tables
• All vital sign monitors (ECG, ECG holters, ultrasonic and
telemetric equipment, etc.)
• Operating and examination lighting devices (a new era of LED
surgical lights)
• Sterilization containers
• Instrument sets
• Pressure ulcer prevention program and special pressure ulcer
prevention beds
• Laparoscopic, arthroscopic and endoscopic instruments,
instruments for gynaecology and urology
• Titanium bone plates with fixed and variable angle screws
• Consumables
• Surgical gowns and patient clothing
• Medical gas distribution systems
• Medical carts, trolleys and furniture
• Equipment for infirmaries and medical offices
All products from our offer are manufactured in the Czech Republic or the European
Union. Servicing and staff training for every supply are provided as a matter of course.
In addition, we are making preparations for in-house manufacture of products
unavailable on the market at the moment.
The crucial part of our portfolio is consumable supplies where quality and price are
our primary concern. On the other hand, we bring very good and quality products
from many manufacturers who supply top-quality and professional products at very
competitive prices.
82
CONTACTS
PD clean construction, s.r.o.
PD clean construction, s.r.o., U Vodojemu 1241, CZ 757 01 Valašské Meziříčí
tel.: +420 775 252 158
e-mail: pd@ciste-vestavby.cz
www.ciste-vestavby.cz
The company PD Clean Construction is specialized in
implementation of clean rooms in form of complete
deliveries including all components for clean rooms.
These deliveries are arranged starting from the design
through the delivery, installation up to putting into
operation or arrangement of permanent servicing.
Our company is a stable partner of building companies and for investors from the Czech Republics
as well as from abroad in the area of deliveries for
health-service facilities and for hospital rooms.
Clean rooms are mostly built in areas as manufacture
of medicines and active pharmaceutical ingredients,
operating theatres and rooms for health service which
have special requirements for purity of environment.
We deliver a comprehensive system of components
called FRESH for implementation of demanding
plants and rooms; this system includes components
designed specially for built-in clean rooms. They
are mainly panels for partition walls and wall facing, cofferings as well as panel soffits, doors including automatic control by means of sensors, laminar
fields and components for air-handling systems. Last
but not least, we also deliver a wide assortment of
health-service equipment.
83
CONTACTS
Pharmdata s.r.o.
Pharmdata s.r.o., Pelikánova 7, CZ 162 00 Praha 6 – Liboc
tel.: +420 235 363 617, +420 235 363 614
e-mail: info@pharmdata.cz
www.pharmdata.cz
The goal of the Pharmdata company is to collect, maintain and integrate information
from a particular sphere of healtcare, so that it is always up to date and easily
accessible for every user. The majority of processed data is designed for experts. All
data is sorted by the needs of the different types of users. Some information was
adapted to meet the needs of a laymen and is available to the general public.
For hospitals
For doctors
•
•
•
•
•
•
• searching for all basic information about
pharmaceuticals, food supplement and current
medical devices
• entire SPC of medical devices
• comparing of current additional payments in ATC
• directory of producers and suppliers
nomenclature of medical devices
code-book of medical devices
pairing of the assortment within holding
catalogues of medical devices
declaration of conformity
directory of producers and suppliers
For public drugstores and ZP shops
• code-book of pharmaceuticals, medical devices,
food supplements and other medical assortment
• logistic information (packaging, weight, storage
temperature etc. of medical devices)
• searching for assortment, detail information,
SPC, declaration of conformity etc.
• directory of producers and suppliers
For manufactures
•
•
•
•
•
•
registration products to code-book PDK and ZP
assignation PDK and APA codes
document check-up
photo documentation
statistics about the interest in products
product diversification
For online drugstores
• code-book of pharmaceuticals, medical devices,
food supplements and other medical assortment
• immediate application of actual leaflets, display
of preparations and other selected information
• logistic information (packaging, weight, storage
temperature etc. Medical assortment
• directory of producers and suppliers
For manufacturers and distributors
• code-book goods
• logistics information (weigh, storage temperature
etc.)
• address books of drugstores
• statistics about the interest in products
• certificates
For public
• fundamental information about medicine and
other pharmaceutical goods
• address book of pharmacies
• e-pharmacy contacts
84
CONTACTS
PROFIL NÁBYTEK, a.s.
PROFIL NÁBYTEK, a.s., Hradská 280, CZ 396 01 Humpolec
tel.: +420 565 300 111, fax: +420 565 300 112
Showroom: Vinohradská 130, 130 00 Praha, tel.: +420 777 740 479
e-mail: info@profil-nabytek.cz
www.profil-nabytek.cz
PROFIL NÁBYTEK since 1992 focus on complete interior
furnishing for hospitals, consulting rooms, laboratories,
operating rooms, waiting rooms, nursing homes, bed
sections, nurse rooms, canteens.
We provide custom service - consulting, design,
project and computation, own production, expedition,
transport and assembly. Certificate of warranty and
after warranty service are a matter of course.
We successfully installed the integrated quality control
systems CSN EN ISO 9001:2001 and CSN EN ISO 14001
: 1997. Our products went through an evaluation by
the National Examination Institution of Light Industry
s.p. in Ceské Budejovice. Decisive indicators for the
approval of products were realized and on that basis
we received the certificate which assures czech quality
and ecologically friendly products for the customers.
We have insisted on extending custom service ever
since the establishment of the company.
Furniture lines PROFIL, PRAKTIK, PRAKTIK 2 are designes for heakth service offering
variable, comfort solutions of user demands according to function and aim of work
to create friendly space for doctors, patiens, visitors, medical facilities staff as well.
We furnish interiors all arend Czech republic, Slovakia and EU countries. POLYGON
furniture follows individual design and trends, which we created in cooperation with
DIVAN design studio.
We offer komplex, reliable, experienced realizations together with atypic, challenging
and individual solutions of your needs.
Furniture for:
• health service
• nursing homes
• laboratories , doctors
• atypic, custom rooms
Work units, tables, cabinets, file cabinets, containers, beds, chairs,
desks, accessories.
85
CONTACTS
ProSpon spol. s r.o.
ProSpon spol. s r.o., Jiřího Voskovce 3206, CZ 272 01 Kladno
tel.: +420 312 247 763, fax: +420 312 248 927
e-mail: prospon@prospon.cz
www.prospon.cz
ProSpon is a Czech company established in 1992. We are developing, manufacturing
and distributing implants and instruments for orthopaedic surgery and traumatology.
Since the company was established it focused on external fixators, currently supplies
also implants and instruments for ACL reconstruction, spinal fixators, oncological
replacements of all big joints and succesfull shoulder replacement Sosna. Most of
the distributed products are manufactured by our company, moreover we are Czech
distributor of companies Orthomed (France), Implantcast (Germany), Teknimed and
JEIL Medical Corporation (Korea). Our products are saled in most Czech hospitals,
both public and private. We have customers also in Slovakia, Russia, Baltic countries,
in Greece, Turkey and France.
Company collaborates with many scientific organizations at the development (CVUT
- Czech technical university Faculty of mechanical engineering, The first Medical
Faculty of Charles University in Prague) Manufacturing takes place mostly in our
premises, we are equipped with both mechanical and CNC turning machines and
milling machines and with EDM (wire cutting) machine. Our production department
manufactures aside medical devices also custom made products following customers
technical drawings.
External fixators:
• UNI-FIX
• PH-FIX
• Hybrid fixator
• MP-FIX
•
•
•
•
•
•
•
•
•
•
ACL reconstruction
Individual oncological implants
Spinal fixators
Shoulder EP Sosna
Knee replacement VEKTOR
Cervicocapital endoprosthesis of hip joint
Wrist replacement
Metatarsophalangeal joint replacement
Set for knee joint fusion
Set for compression arthrodesis of knee joint
86
CONTACTS
PULSKLIMA spol. s r.o.
PULSKLIMA spol. s r.o., Andělská cesta 609/11, CZ 460 01 Liberec 12
tel./fax: +420 485 122 159, +420 485 122 109
e-mail: pulsklima@pulsklima.cz
www.pulsklima.cz
Dear Business Friends and Partners,
let us introduce you our company PULSKLIMA Ltd. with
the registered office in Liberec. The PULSKLIMA brand
enjoyed good market reputation due to our special
installations for the so-called CLEAN ROOMS (Note:
A clean room means a room or more rooms where a
certain class of air purity is required to be maintained
with use of a special technology). We supplied complete
installations of clean rooms and HVAC equipment to
significant suppliers and investors in the pharmaceutical
industry and health service.
At the present time, we still specialize in the
implementation of the so-called clean rooms; however,
our supplies are comprehensive, covering all components
for clean rooms, HVAC, air conditioning, cooling systems,
and measuring and regulation systems. The supplies are
provided in the whole range, i.e. from a project, supply,
installation, putting into operation, and permanent
servicing of the installation if required.
As regards the supplies for health service faciliƟes
and hospitals, our company has become a significant
partner of construcƟon companies and investors both in the Czech Republic and abroad. Even in other industrial branches
demanding supplies of top-quality HVAC equipment or cooling systems, the PULSKLIMA company has impressed itself
on the mind of customers as a reliable partner with professional approach at implementaƟon of even most challenging
construcƟons.
RECONSTRUCTION - ADAPTATION - CONSTRUCTION
Systems for installaƟon of CLEAN ROOMS enable variable sets of necessary technologies and equipment.
The components used for installaƟons have the top quality, a reasonable price, necessary cerƟficates and a design as
required.
•
•
•
•
Supplies of laminar fields
Supplies of air conditioning
Supplies of hygienic ceilings – including recessed light fittings
Adaptations of interior walls
– Panelling
– Fore-walls and partitions
• Signalling and blocking
• Initial system regulation
• Qualified installation of the equipment
87
CONTACTS
PURO-KLIMA, a. s.
PURO-KLIMA, a. s., Štěchovická 2266/2, CZ 100 00 Praha 10
tel.: +420 261 144 111, fax: +420 261 144 160
e-mail: info@puro-klima.cz
www.puro-klima.cz
PURO-KLIMA, a.s. is a 100% Czech engineering and supply company
with own design office, specializing in services for the entire spectrum of
health service facilities, ranging from teaching hospitals to the smallest
medical facilities, both in the public and private sectors.
PURO-KLIMA provides the following services:
• Consultation with managers - selection of best-suited technologies,
based on most current trends and standards, consultation with endusers of equipment
• Technical support and preparation of documentation
• Project documentation from preliminary study to final drawings and
documentation design
• Project author supervision
• Complex delivery and installation of investment projects – “turn key
BORCAD delivery bed AVE
projects”
• Delivery of medical equipment for:
- Operating rooms, Intensive care, Central sterilization, Cardiological
centers, Transplant centers Diagnostic centers, x-ray diagnostics
- Computer tomography and magnetic resonance
- Radiation equipment and equipment for nuclear medicine
- Systems of emergency medicine
- Transfusion sections/machines
- Dialysis sections, labs
- Inpatient care sections
- Rehabilitation and spa technologies
- Food sections, laundry solutions
- Special infection sections of civil and military medicine, biological
laboratories
- Clinics, dental centers including labs, pharmacies
- Systems for decontamination of infected waste, etc.
• Deliveries of special building technologies
(centralised medical gas distribution, built-in operating rooms, air conditioning, laminar air flow supply)
• Technical control of building readiness
• Professional training of medical staff
• Warranty and post warranty service
PURO-KLIMA, a.s. supports a wide spectrum of healthcare facilities not only in the Czech republic. PURO-KLIMA, a.s.
is presented in Slovakia by the organization unit – PURO-KLIMA, a.s. (in Piešťany) and by the form of representative
office in Vietnam – VPDD PURO-KLIMA, a.s. in Ho-Chi-Minh City. In the field of foreign trade cooperates with its sister
company PURO-KLIMA EXPORT a.s.
PURO-KLIMA, a.s. also offers its services through the companies TOO PURO-KLIMA (Almaty, Kazakhstan) and
PURO-KLIMA, S.A.R.L. (Libreville, Gabon), which like the subsidiary companies operate in the presented territories.
88
CONTACTS
RADIX CZ, s.r.o.
RADIX CZ, s.r.o., Čáslavská 231, CZ 284 01 Kutná Hora - Karlov
tel.: +420 327 315 980, fax: +420 327 315 981
e-mail: radix@radixcz.cz
www.radixcz.cz
RADIX as a trading company focusing on deliveries of sanitary technology, material
and implants as well as on comprehensive furnishing of sanitary facilities (from
ambulances to hospital facilities) was established in the year 1991. We collaborate
solely with renowned world producers of sanitary technology.
In the year 2003 the company’s marketing strategy expanded to the Czech market
where the daughter firm, RADIX CZ, is active. It supplies sanitary technology to the
extent corresponding with the parent company’s product portfolio. The business
strategy of the company is based on high demands in the area of quality of offered
products and services as well as on maximum satisfaction of customers. Among the
most crucial qualitative criteria is quality management system and STN EN ISO 9001
: 2001 Certificate which RADIX obtained in the year 2004. Professional approach of
in-house employees contributes to achievement of high degree of satisfaction of our
customers.
Manufacturers represented in the Czech Republic by RADIX CZ
KARL STORZ
MERIVAARA
TRILUX
DE SOUTTER MEDICAL
ECLERIS
MEDIVATORS
CONDOR
SPIEGGLE & THEIS
INSAUSTI
AIRINSPACE
Endoscopy for ENT, Orthopedics, Neurosurgery, ARO and
Emergency medicine, Oral and Maxillofacial Surgery
and Gastroenterology
Operating tables
Surgical and Examination lights
Drilling and Sawing systems
ENT microscopes, colposcopes
Washing and disinfecting machines for flexible
endoscopes, drying cabinets
Retractors for all surgical disciplines
Narrow specialization in ENT (TORP, PORP, ventilation
tubes, etc.)
Hospital Furniture
Decontamination air
Customer service
• formation of implants consignment warehouses
• possibility to test sanitary technology before purchase
• flexible servicing and (subsequent) after-sales customer care
• possibility to borrow substitute technology during the time of repair
• organization of trainings for customers
• the bestselling products are immediately delivered from a warehouse
89
CONTACTS
ROYAX, s.r.o.
ROYAX, s.r.o., Hlavní 827, CZ 250 64 Hovorčovice
tel.: +420 321 123 111, fax: +420 321 123 112
e-mail: info@royax.eu
www.royax.eu
ROYAX is a well-established company engaged in manufacturing
medical equipment, especially emergency medical equipment in
EMS. The company has entered market with the aim to address
professional public through high quality products, using new
materials, manufacturing technologies, services, and customeroriented approach.
Company ROYAX produces the following products:
Medical Kits
ROYAX medical cases and kits have been designed and produced
with the purpose of providing quality and durability. The most
important comfort criterion of these products is to offer quick access
to all chambers, sections, and medical instruments. Hard cased
kits, which have the ability to resist shocks and effects of water,
dust, oil, etc., provide remarkable safety for all medical instruments
inside. Therefore, they can be used in uncommon and challenging
rescue situations. The major design and production criterion for soft
cases was “ergonomics”. Three different handlings, such as handy,
shoulder, and back bag, are possible.
Immobilizers
Utilizing polyurethane and PVC coated material along with high
frequency welding are main improving factors in maintaining
lightweight, easy to use, quick fasten, and easy to wash features for
all ROYAX splints and immobilizers.
Stretchers
We use lightweight and high-strength material and intelligent
design for safe mobility and transportation.
In order to present high technologies, materials, and intelligent
design ROYAX cooperates with leading research and development
institutions located in the European Union.
The company is certified by the norms EN ISO 9001:2008, EN ISO
13485:2003 + AC: 2009, and EC Certificate and is a member of
Association of Manufacturers and Suppliers of Medical Devices.
Moreover, all the products conform to the European Standards
EN 1789 and EN 1865.
ROYAX is an independent, privately owned company, with an internal
mission to work in close co-operation with customers and official
distributors worldwide.
90
CONTACTS
SIAD Czech spol. s r.o.
SIAD Czech spol. s r.o., Braňany u Mostu, c.p. 193, CZ 435 22 Braňany u Mostu
tel.: +420 476 765 000, fax: +420 476 129 286
e-mail: siad@siad.cz
www.siad.cz
The company SIAD Czech spol. s r.o. is a branch of
Italian firm SIAD S.p.A. which was established in 1927
in Italy by the Sestini’s family. In the late eighties of
the last century SIAD entered into an agreement with
PRAXAIR one of the leading American manufacturers
and suppliers of medical, industrial and technical
gases. In the Czech Republic SIAD has been operating
since 1993 starting with the sales and distribution in
the medical gases in 2001 and expanding its activity in
the medical devices and instruments business in 2008.
•
•
•
•
•
•
•
•
•
•
•
Medical gases and respiratory mixtures
Gases for anesthesia
Gases for sterilization and laboratories
Gases for laparoscopy, cryosurgery
Cryogenic dewar vessels
Cryopreservation containers
Bags for preservation of blood cells
Devices and equipment for laparoscopy
Devices for sleep diagnostic
Devices for ventilation treatment
Hardware system for audio*visual
stimulation in fMRI
• Custom made cranial prosthesis
91
CONTACTS
Sicar spol. s r.o.
Sicar spol. s r.o., Masojedy 59, CZ 282 01 Český Brod
tel.: +420 321 613 200, fax: +420 321 613 209
e-mail: info@sicar.cz
www.sicar.cz
Our company Sicar spol. Ltd was estabilish in December 28th
1993 in Sibřina village situated on the east fringe of Prague. From
the start production , the company is manufacturer of sanitary
vehicles mainly . Since 2005, the company has its own production
facilities with a capacity of approximately 500 ambulances a year.
The new facility allows to produce other types of special vehicles
in a different model variants. Now the company operates about 40
employees. In year 2007 we produced 270 ambulances. Today the
company delivers ambulances to other countries such as Germany,
Austria, Switzerland, Slovakia, Syria, Russia, Belgium, Scandinavia,
Romania, Holland, etc. Therefore come into being an export
department, which is in charge of their own exports, but also guide
our branches in the world. They are Sicar - M in Moscow, Sicar
Slovakia, Sicar Nordic.
In year 2003 we received certification according to standards ISO
9001:2001, which we introduced in the renowned French company
BVQI. In 2005, we introduced the assembly of the interior of
ambulances in the standard EN 1789. We are currently working on
other qualitative standards such as the environment, etc.
With coming of new types of vehicles such as VW, MB, Renault,
Ford, technically we modernize our buildings – interior - so that
their technical levels reach those vehicles and modern trends.
With the entry into the European Union, we opened up new
opportunities in the European free market. This is a big appeal for
further development of our company and our products.
We are pleased to invite you cordially, our honored customers, to
visit us.
92
CONTACTS
SIVAK medical technology s.r.o.
SIVAK medical technology s.r.o.
Jana Masaryka 1713, CZ 500 12 Hradec Králové
tel.: +420 495 220 684, fax: +420 495 221 327
e-mail: sivak@sivak.cz
www.sivak.cz
Since its establishment in 1990, the SIVAK Company has dealt with services for
people with physical disabilities. At the beginning, the company provided mainly
maintenance services, later it enlarged its activities with commercial and consulting
services. Since 1995, the SIVAK Company has been the exclusive representative
for US Company INVACARE, an umbrella organization for well-know European and
worlds brands, of the Czech Republic.
The INVACARE products became highly popular on the Czech market of which they
became an inherent part. At present, SIVAK belongs to the largest suppliers of the
health care equipment and operates and further broadens its own its own network
of service centers allover the republic. SIVAK supplies a rich assortment of products,
especially electrical and mechanical wheelchairs for indoor and outdoor use, lifting
devices, beds with adjustable positioning, oxygen concentrators, toilet chairs and
wheelchairs, aids and hygiene products for home and institutional care.
Most products are paid by insurance companies of which SIVAK is an important
partner. The main feature of the INVACARE products is not only their premium
quality and new production technology,
but also modern design, easy operation, a wide range of accessories, long warranty
periods, and affordable prices.
The SIVAK Company is also a partner of other major European producers in the Czech
Republic in particular: AKS, HANDICARE, HANSE, VITAACTIVA, REHASTAGE.
The SIVAK Company became a regular participant in all significant exhibitions and
fairs held in the Czech Republic and its products are always in the center of visitors´
attention and receive many awards, to name at some: SIVAK received seven Golden
Rehaprotex awards that are given at the REHAPROTEX international fair in Brno. The
company publishes its own information newspaper, goes to see its clients in their
homes, cooperates with associations for the disabled as well as with professionals
from amongst the disabled and with their various organizations, which enables
SIVAK to better orientate in their needs. It is a common place for SIVAK that delivers
and services its aids as well as that it provides high-quality consulting.
•
•
•
•
Commercial and service activities
Consulting
Organization of and participation in exhibitions
Delivers and maintenance service of products:
active mechanical wheelchairs, sport wheelchairs,
special wheelchairs and position adjustable beds;
home care aids, baths, lifters and hygiene products.
93
CONTACTS
Speciální Medicínská Technologie, s.r.o.
Speciální Medicínská Technologie, s.r.o., Papírenská 114/5, CZ 160 00 Praha 6
tel.: +420 233 320 201, +420 224 316 720, fax: +420 224 318 011
e-mail: smt-praha@smt-praha.com
www.smt-praha.com
Special Medical Technology Co. Ltd. is an all-Czech design
and manufacturing company, which is founded mainly on
the expert knowledge and experience that the company
promoters have gained during the past two decades.
The company is owned by seven shareholders. There are
four main employees in the commercial department and
twenty-five contractual salesmen for the domestic market
and eight others for the foreign market.
The principle decisions are made at the company’s general
meeting. The company director manages the company’s
current operational direction, either directly or through the
heads of the company’s individual departments.
The company’s orientation and main operational areas
include the development, design, manufacture, sales and
service of the ELECTROSURGICAL and CRYOSURGICAL
systems, instruments, tools and accessories for various
human medical specialisations, including special
equipment for dentistry as well as a parallel line of
equipment for veterinary surgery. The company has been
granted international certificates that confirm that its manufactured products
are conformable with the standards currently in effect in the European Union
and the Czech Republic (ISO 9001, ISO 13 485, the European Council Guidelines
93/42 EEC, EN 60601-1, EN 60601-1-2, EN 60601-2-2) as well as certificates in
accordance with the Collection of Ordinances of the Government of the Czech
Republic ČR NV 336/2004 Coll. and other Czech internal standards and operative
regulations. The certification body for the Czech Republic and the EU is now the
EZÚ Prague-NB 1014, (previously the G-MED-NB 0459 located in Paris, France).
The company products hold the CE Mark of conformity CE 1014 (previously the
CE 0459). All the company’s products are delivered with a valid Declaration of
Conformity.
Special Medical Technology, Ltd. is the only manufacturer of instruments for
ELECTROSURGERY and CRYOSURGERY in the Czech Republic. Its professional
products are noted not only for their high quality, multi-purpose utility and safety
but for their favorable price and accessible service as well. The company’s credomission is to equip physicians with modern, high quality instruments that have a
high utility value and reliable service and all for a reasonable and accessible price.
HIGH TECH but not HIGH PRICE!
The company thus works together with Czech as well as foreign physicians
on the development of instruments for the fields of CRYOSURGERY and
ELECTROSURGERY.
• Electrosurgery and Cryosurgery Equipments Manufacturer
94
CONTACTS
S&T Plus s.r.o
S&T Plus s.r.o, Novodvorská 994, CZ 142 21 Praha 4
tel.: +420 239 047 500, fax: +420 239 047 549
e-mail: info@sntplus.cz
www.sntplus.cz
Since 1999 the company S&T Plus has been a reliable and respected
supplier of medical devices for a wide range of customers. The initial
assortments of the company at the outset of its existence were the
products of the Hewlett-Packard medical division. These products
especially covered ultrasound systems and patient monitors. Due
to organizational changes the Hewlett-Packard product portfolio
moved under the wings of the PHILIPS concern, who remain one of
the key partners for S&T Plus even today.
S&T Plus currently offers complex customer solutions in the field
of cardiology instruments, ultrasound imaging systems and patient
monitoring. AirLiquide French pulmonary ventilation systems are
also an important part of the product offer. Cooperation with
the Norwegian company Laerdal, one of the global leaders in the
manufacture of patient stimulators, manikins and aids for medical
emergency and rescue service/urgent care, was started in 2008.
S&T Plus is especially aimed at an individual approach to its clients
and their long-term satisfaction with the provided services –
starting from the project preparation, through business realization
until the after-sale services.
95
CONTACTS
STROJÍRENSKÝ ZKUŠEBNÍ ÚSTAV, s.p.
STROJÍRENSKÝ ZKUŠEBNÍ ÚSTAV, s.p. (Engineering Test Institute)
headquarters Brno, Hudcova 424/56b, CZ 621 00 Brno
tel.: +420 541 120 111, fax: +420 541 211 225
e-mail: szu@szutest.cz
www.szutest.cz
The Engineering Test Institute, acting as Accredited
testing laboratory and Certification body for
certification of products, management systems and
persons.
IN THE FIELD OF MEDICAL DEVICES:
• Health care beds, manual/electric wheelchairs,
stretchers, hoists
• Walking aids
• Electric/non-electric operating tables
• Dental units
• Mechanical/electric anesthetic equipment,
anesthetic gas monitors
• Lung ventilators
• Incubators, radiant heaters
• Diagnostic and monitoring devices –
electrocardiographs, electromyographs, …
• Electrosurgical instruments, power units for instruments
• Equipment for extracorporeal circulation, suction devices,
pumps and dispensers
• Washing and disinfecting equipment, sterilizers, centrifuges,
water distillers
• Devices for ultrasonic imaging, X-ray, lasers and other
equipment
PROFESSIONAL COMPETENCE (EC DIRECTIVE – GR):
• 2006/95/EC,(17/2003 Coll.) Low-voltage equipment
• 2006/42/EC,(176/2008 Coll.) Machinery
• 2004/108/EC,(616/2006 Coll.) EMC
ACTIVITIES:
• Assessment of product conformity pursuant
to Act No. 22/1997 Coll., as amended
• Product certification
• Product testing
• Certification of quality management systems according
to ISO 9001, EN ISO 13485
• Special equipment manufacturing
• Training and seminars
• Information services
• Consultancy services
96
CONTACTS
Synthesia, a.s., SBU Nitrocellulose, BU Oxycellulose
Synthesia, a.s., SBU Nitrocellulose, BU Oxycellulose,
Semtín 103, CZ 530 02 Pardubice
tel.: +420 466 824 503, +420 466 824 502, fax: +420 466 822 958
e-mail: oxycellulose@synthesia.eu
www.okcel.eu, www.synthesia.eu
Synthesia, a.s. is the major European producer of qualified chemistry.
With 1630 employees, turnover around 130 million € and more
than 90 years long tradition, we produce hundreds of products
for customers in 60 countries all over the world. 100% shares are
owned by Agrofert, a.s.
SYNTHESIA is divided in these Strategic Business Units:
•
•
•
•
•
SBU Pigments and Dyes
SBU Nitrocellulose
SBU Organic Chemistry
SBU Energetics
VUOS (Research Institute for Organic Syntheses)
BU Oxycellulose is a part of SBU Nitrocellulose, which can boast
more than 20 years of experience in dealing with oxidized cellulose
and production of semi-products intending for further finalization
of medical devices (powder form oxycellulose), but also with the
production of final medical devices (flat forms). This product line
is called OKCEL® and the whole portfolio of these products is
classified as class III medical devices. OKCEL® range products were
CE certified in 2010. All of the products are produced according to
ISO 13485:2003. OKCEL® is used directly by surgeons during various
invasive procedures for the control of hemostasis of capillary,
venous and arterial small diffuse bleeding. After application of
OKCEL®, it can be retained in the body because this product line
is fully biocompatible and after 21 days is fully absorbed, without
any residues. As the raw material used for manufacturing OKCEL®
is natural, vegetable origin, it does not cause allergic reactions. Due
to the low pH, OKCEL® has the antimicrobial effects which promote
the healing of operational and other injury of internal organs.
Our portfolio contains also Chitosan acetate, which is semi-finished
product of an animal origin. Chitosan acetate is mainly used for
acute bleeding in the non-sterile environment (car crash, natural
disasters or military conflicts).
Products are available in the forms as follows:
Textile form
• OKCEL H-T (original textile form of oxidized cellulose)
• OKCEL H-D (heavy duty textile form of oxidized
cellulose with higher absorbency)
• OKCEL F (flexible, layered cotton wool form)
Linter/powder form
• OKCEL H-L
• MDOC (exclusive production)
• OKCEL Ca-L (calcium salt of oxidized cellulose)
• Chitosan Acetate
97
CONTACTS
Trystom, spol. s r.o.
Trystom, spol. s r.o. , Pasteurova 15, CZ 772 00 Olomouc
tel.: +420 585 225 262, fax: +420 585 225 262
e-mail: trystom@trystom.cz
www.trystom.cz
The Laboratory and Medical Equipment Division of the
company TRYSTOM spol. s r.o., was established in 1993 by
privatization of Development Laboratories and Workshops
of the Palacky University in Olomouc with the intention
of developing and manufacturing equipment for dental
laboratories. The ensuing success in this field meant
that the division, and subsequently also the production
programme, gradually expanded. Currently, the division’s
main spheres of activities include development and
production in the following fields:
• instrumentation equipment for dental laboratories
• components and equipment for urological and
ultrasound devices
• armamentarium for anthropometric measuring devices
• custom development and production of laboratory and
medical equipment
TRYSTOM, through its structure and personnel setup,
primarily focuses on the development of instrumentation
and equipment with subsequent small-batch production.
It has its own production and technical background,
which, together with a team of qualified and experienced
technicians, enables it to fully comply with the demanding
requirements for production of today’s laboratory and
medical equipment. TRYSTOM has been the holder of the
ISO 9001/2000 (or more precisely 9001/2008) quality
management system certificate for “Development,
production, sale and service of instrumentation and
medical devices” since 1999, the validity of which is
successfully renewed every year through recertification
audits. TRYSTOM aims for total satisfaction of its customers
and for supporting their technological development.
We strive to achieve this goal through the professionalism
expended by our employees and by virtue of innovative
approaches to addressing new development challenges.
This layout of our customers’ portfolio and competitive
range of products enable our active development and
continuation of the tradition.
98
CONTACTS
TSE spol. s r.o.
TSE spol. s r.o., Mánesova 390/74, CZ 371 52 České Budějovice
tel.: +420 386 721 149 (107), fax: +420 386 721 102
e-mail: medical@tse.cz
www.tse.cz
TSE spol. s r.o. has been engaged in the development, design, manufacture, installation
and service of medical equipment for neonatology since 1992. More than 50-year
tradition in electronic manufacturing, custom development and production, qualified
stuff system ensure high quality of our products, which are exported to countries all
across the world through our distribution channels.
TSE spol. s r.o. specializes in the production of neonatal equipment such as the
stacionary incubators, the transport incubators and the phototherapy lamps. The
latest line of stationary infant incubators is designed for intensive care, providing
the patient and staff comfort required for modern medical products. The incubators
may also be supplemented with a phototherapeutic lamp, designed for the treatment
of neonatal jaundice.
TSE spol. s r.o. focuses on high added value products, supporting its customers with
the full range of services from installation to professional training and warranty &
after-warranty service. The company has implemented a quality management system
according to ISO 9001, ISO 13485, ISO 14001 in accordance with Directive 93/42/
EEC and its products meet all the relevant requirements.
TSE spol. s r.o. also distributes and supplies a wide range of products and accessories
for neonatology from domestic and foreign manufacturers and partners.
•
•
•
•
•
•
Patient monitors and ECG
Infant cribs
Lung ventilators
Respiration monitors
Suction units
Resuscitation units
99
CONTACTS
Textilní zkušební ústav, s. p.
Textilní zkušební ústav, s. p. , Václavská 6, CZ 658 41 Brno
tel.: +420 543 426 711, fax: +420 543 426 742
e-mail: info@tzu.cz
www.tzu.cz
The Textile Testing Institute with the seat in Brno is an organisation,
which directly follows up the tradition of textile testing in the Czech
Republic. It has been providing services in this line of business for more
than three decades and is one of the key institutions focusing on testing
and certification of textile products in the CZ. This is corroborated by the
fact that the TTI laboratory was the first body to be accredited to carry
out tests in the CZ in compliance with European standards as early as
1991.
Testing
The Accredited Testing Laboratory performs over 300 accredited
tests and uses hundreds of methods in compliance with national and
international standards. The laboratory is ready to test any type of
fabric in any form. We test materials, finished technical fabrics, such as
geotextiles, floor coverings and many other products.
Product Certification
May be voluntary, guaranteeing the product quality, or compulsory
in accordance with statutory provisions, where safety of products
is assessed. As the Notified Body No. 219 and Notified Body No.
1021 TTI may assess compliance of the products in question with
the European directives from the point of view of meeting safety
requirements. For some of these products, inspection of the quality
production management is required and it can be arranged through the
certification of the production management system.
System Certification
Is accredited for awarding certificates in compliance with the
requirements of ISO 9001:2001 for quality management system, system
of environmental management pursuant to ISO 14001, and furthermore
ISO 13485 for medical equipment. The certificates are internationally
recognised, because they are awarded within the IQNet international
network. Moreover, TTI provides certificates in the areas of standards
for ensuring occupational health and safety under the title of OHSAS
18001 and the system of critical points of the food industry - HACCP
and industrial laundries - RABC.
The Textile Testing Institute carries out its activities according to
the latest methods trying to keep up with world trends in testing,
metrology, standardization and certification as much as possible. We
are aware of the fact that our future is closely connected with cooperation on a European level, and therefore we keep in touch with
the other professional institutes involved in certification, testing and
research, of our closest neighbours - Austria, Germany, Poland, Slovakia
and obviously also Hungary.
Thanks to the knowledge and expertise of our workers we continuously
maintain a high professional level of the services provided. We will be
only too happy to satisfy your requirements and wishes.
We will assess your quality ...
100
CONTACTS
UJP PRAHA a.s.
UJP PRAHA a.s., Nad Kamínkou 1345, CZ 156 10 Praha-Zbraslav
tel.: +420 227 180 304, fax: +420 227 180 390
e-mail: obchod@ujp.cz
www.ujp.cz
Company is manufacturer and supplier of medical equipment and system for
radiotherapy. We provide a wide range of services related to our equipment for
to have our customer fully satisfied with our device, warranty and after-warranty
service and personal training including. Equipment is operated in many countries,
e.g. Slovakia, former SU, Indonesia, Mongolia and others.
RADIOTHERAPY EQUIPMENT AND SYSTEMS
Radiotherapy X-ray simulator TERASIX
Unique concept of X-ray simulator for radiotherapy for the planning of the
radiotherapy treatment of the patient virtually complemented with all the
information for application of the treatment.
• Simulation of all types of teletherapeutic irradiators
• Simulation of multi-leaf collimator (MLC) at arbitrary position
• Possibility of modification proposal for individual fields shaping devices
• Digitalization of the X-ray image in real time
Radiotherapy cobalt unit TERABALT
Modern equipment guarantees a high quality irradiation of oncological patients
with the application of the most modern digital technologies of control systems
• TYPE 80/100 (SAD 80/100), symmetric (model SCS) and asymmetric (model
ACS) collimation system
• Accurate radiation dose transfer in the space
• Application of the most modern radiotherapy trends
• On-line diagnostics at the operating unit conditions
Radiotherapy planning system PlanW
The planning system for external radiotherapy
• Support of the saving of the patients data
• Fully 3D mode in the calculations and views
• Support of interconnections of radiotherapy equipment
and system via the data format DICOM RT
Record and Verify system TERAGIS
TERAGIS is the database system allows to acquire, store and use the patient´s
treatment data.
• Verification of the treatment parameters
• Own treatment calendar for working day planning and patients
• System is fully integrated part of RCU TERABALT and TERASIX simulator
101
CONTACTS
VIACELL s.r.o.
VIACELL s.r.o., Klíšská 1346/14, CZ 400 01 Ústí nad Labem
tel.: +420 475 621 361 nebo +420 475 621 502, fax: +420 475 621 304
e-mail: info@viacell.cz
CONTACTS
www.viacell.cz
Viacell Ltd. is a genuinely Czech company which was established in 2003. Its primary focus
are the medical devices which assist healing of wounds on the basis of hydrogel. The hydrogel
sheets are devised to help as a first aid in case of burns. Furthermore, they support the healing
both of chronic and of acute wounds. In addition to the hydrogel sheets, we have a great
variety of products including special adhesive plasters for healing minor wounds (i. e. hydrogel
plasters to prevent and dress blisters), as well as adhesive plasters for diabetics and the most
common ones.
In the range of common plasters, there are to be found blue detectable plasters for food
industry; children’s picture plasters; and adhesive strips of various shapes, sizes and appearance.
for burns
for scratches
We cooperate with doctors and by doing so, we gain practical experience which helps us and
our clients to make better use of the modern devices for wound-healing on the basis of wet
therapy.
The packaging and the instructions of these modern devices are suitable both for the general
public as well as for clinical facilities. Thanks to the cooperation with other Czech producers,
we are competent to provide the clinical facilities with a complete supply of adhesive plasters
and medical dressings, including the modern devices for wound-healing on the basis of wet
therapy.
for healing
for diabetics
for blisters
against wrinkles
102
VITAPUR
VITAPUR, Vlasta Veselíková, Nová 856, CZ 570 01 Litomyšl
tel.: +420 461 612 579
e-mail: info@vitapur.cz
www.vitapur.cz
Let us introduce our company to you. It was established in 1991. Under
the brand of VITAPUR we are developing, producing and selling products
for professional and home care: antidecubitus mattress, hygienic bedding
(bed sheets, mattress pads, bed pads, etc.), positioning and stabilizing
means, antidecubitus means, anatomic pillows and other products. Our aim
is to provide users with fully-fledged functional products, solutions with
no compromise which are 100% reliable. Therefore we are developing our
own constructions and designs and we use and combine special functional
breathable but impermeable materials with modern technologies of
connecting them.
The company uses quality management systems in accordance with ČSN EN
ISO 9001:2009 and ČSN EN ISO 13485:2003 for the following spheres of
activities: development, production and sale of health care equipment and
equipment for home care, social welfare facilities and hospitals.
RANGE OF PRODUCTS
• antidecubitus mattress
• hygienic bedding
• positioning means
• stabilizing means
• antidecubitus means
• anatomic pillows
103
CONTACTS
Zdeněk Holomý Electronics
Zdeněk Holomý Electronics, Hemy 829, CZ 757 01 Valašské Meziříčí
tel.: +420 571 685 970 (971), fax: +420 571 685 979, GSM: +420 603 102 858
e-mail: sales@holomy.cz
www.holomy.cz
Warning equipment for priority vehicles,
nurse-calling systems
Company Zdeněk Holomý Electronics is the most
significant Czech producer of warning equipment
for emergency and special vehicles and language
laboratories. Signalling nurse-call systems intended
for hospitals and nursing homes are also part of the
production.
Own development and production base, more over
70 years tradition of electronic production, qualified
team and modern management style are guarantee
of high-quality and competitive products and
services which are exported to customers world-wide
– Slovakia, United Kingdom, Switzerland, Greece,
Holland, Germany, France, Austria, Russia etc.
All products comply with requirements of European
regulations and norms.
Quality Management System is certified according to
EN ISO 9001:2008 and EN ISO 13485:2012, Certificate
No.: CQS 2129/2013 and CQS 102/2013.
• Warning equipment for emergency vehicles
(lightbars, beacons, electronic sirens,
warning lights, LED displays, work lights …)
• Signalling nurse-call systems for hospitals,
intensive care units and nursing homes with
wireless pager option
• Systems for real-time screen transfer and
PC control
• Equipment for language training classrooms
104
CONTACTS
ZES Brno, a.s.
ZES Brno, a.s., Sladovnická 4, CZ 620 00 Brno
tel.: +420 602 709 671
e-mail: marketing@zes.cz
www.pulse-magnetotherapy.com
Zes Brno has been involved in the development,
production
and
repair
service
of
the
magnetotherapeutical medical devices for the home
care, as well as professional use in spas, health resorts,
hospitals and other medical organizations. The joint
stock company ZES Brno has been established on the
1st Jan 1994. Its activities (beside medical instruments
including also polygraphy, publishing, logistics) are
carried out in its own 14 000 sq. meter premises. Since
1997 the company has been developing regnerative and
medical magnetotherapeutic devices with the trade
mark Renaissance. The temporary face and quality
of the devices are the result of the work of the last
seventeen years. The product, which meets the highest
customer requirements on the quality and safety,
is the result. The product parameters are regularly
controlled on the base of high quality standards (EAN
ISO 12485:2003). Renaissance® products meet all
requirements on the EC certifications (norms 93/42/
EHS).
Magnetotherapeutic devices Renaissance support cell regeneration, intensify
and several times accelerate the exchange of substances in the cells, promote
blood ciculation in a perfect way at the respective tissue and blood systém, have
possitive effect on inflamatory processes, brings analgetic effects and improve
immunity.
Because of these effects magnetotherapy brings a lot of applications in the
healing of many health problems, either as a main curative means or as the
supportive one, which accelerates common medical treatment. Nowadays, lowfrequency pulsing magnetotherapy is successfully applied in the fields such
as internal medicine, orthopedics, sport medicine, balneology, rehabilitation,
pediatrics, geriatrics, dermatology, neurology, dentistry, urology, and also in
veterinary medicine. By the distribition network ZES Brno successfully expands
the market share (besides the Czech rep also within other Europaean countries
– Slovakia, Poland, Spain, France and others).
ZES Brno has a long experience in the field of magnetotherapy instrument
production, carefully pays attention to the highest quality processing, warrants
healing effects and clinical results, minimal failure rate and invests a relevant
funds to the development and inovation of the magnetotherapeutic devices
based on the highly-effective electrical low-frequency pulsing magnetic field.
105
CONTACTS
ZPT Vigantice spol. s r.o.
ZPT Vigantice spol. s r.o., Vigantice 266, CZ 75661 Rožnov pod Radhoštěm
tel.: +420 571 757 330 (346), fax: +420 571 757 349
e-mail: medicall@zptvigantice.cz
www.zptvigantice.cz
ZPT Vigantice spol. s r.o. was established in 1993. The main
production programme - product line MediCall – nursepatient communication and signalling systems for healthcare
institutions. The main priorities of the company are product
quality, reliability, individual approach, and professionalism.
Systems work in hundreds of hospitals in the Czech Republic,
in Slovakia, Russia, Kazakhstan, Georgia, Belorussia.
Products
Nurse call system (communication) MDC V02, MDC V03 IP
Nurse call system (signalization) MDC SV05, MDC C03
Calling system MDC AV03
References
Praha UVN, Praha IKEM, Praha VFN, Bratislava UN, Košice
UN, Plzeň FN, Brno FN, Ostrava FN, Brno UN.
Voronezh - Dorozhnaya klinicheskaya bol’nica, Moskva Nauchnyi centr imeni Kulakova, Perm’ - FCSSH, Astrahan’
- Travmatologicheskii centr “LOKOHELP”, Vladivostok - Centr
DVFU, Aktobe - Medicinskii centr Daru, Petropavlovsk –
Kardiocentr, Tbilisi - Central’naya respublikanskaya bol’nica,
Poti - Mnogoprofil’naya klinika.
106
CONTACTS
www.medtechnik.cz
AVDZP_catalogue_EN_04/2014
Organisation:
ASSOCIATION OF MANUFACTURERS
AND SUPPLIERS OF MEDICAL DEVICES
Vinařská 6
603 00 Brno
CZECH REPUBLIC
tel./fax: +420 543 243 032
e-mail: asociace@medtechnik.cz