02 March 2015 - MTI Magazine

Transcription

2 march
2015
For Impressive
Performances
www.mtionline.com
www.kingsland.com
sales@kingsland.com
Download the free MTI app
Now available on the
App Store
for iOS
Android App on
XYZ has it
MILLING
TURNING
BIG & SMALL
BIG & SMALL
From the far reaching XYZ SMX 5000 Bed Mill
with 1,500 mm capacity, to the small and nimble
XYZ EMX entry level Turret Mill, and all sizes in-between.
With three metres of serious turning power from the 6.5 ton
XYZ PROTURN SLX 555 right down to the compact
XYZ PROTURN SLX 1630 and all sizes in-between.
XYZ PROTURN SLX 555
XYZ PROTURN SLX 1630
XYZ SMX 5000 BED MILL
XYZ EMX TURRET MILL
3 metre gap bed lathe
Swing over bed 560mm
Spindle bore 104mm
Distance between centres 3,000mm
Maximum 1,800 rpm
Swing over bed 400mm
Spindle bore 54mm
Distance between
centres 760mm
Maximum 2,500 rpm
7.5hp variable speed head
1930 x 356mm table
1524 x 596 x 584mm travel
Programmable 5,000 rpm spindle
3 hp variable speed head
1069 x 228mm table
660 x 305mm travel
Visit the web site at www.xyzma
The XYZ 2015 machine tool range - each
All XYZ machine tools come with: Full warranty cover, full UK service
XYZ ProtoTRAK Turret Mills, Bed Mills and Lathes
XYZ Vertical Machining Centres & Turning Centres
IN UK
K
IN UK
K
STOC
NOW
XYZ ProtoTRAK® EMX
Turret Mills
3 Models
IN UK
K
STOC
NOW
XYZ ProtoTRAK® SMX
Turret Mills
4 Models
IN UK
K
STOC
NOW
XYZ ProtoTRAK® SMX
Bed Mills
4 Models
IN UK
K
STOC
NOW
XYZ ProTURN® Lathes
6 Models
STOC
NOW
XYZ Prototrak LPM system
IN UK
K
STOC
NOW
XYZ Mini Mill 560
IN UK
K
STOC
NOW
XYZ Vertical Machining Centres
3 Models
IN UK
K
STOC
NOW
XYZ High Speed VMC
Tel: 01823 674200 Fax: 01823 674201
MACHINE TOOL DEMOS ARE AVAILABLE AT ANY OF OUR SEVEN UK SHOWROOMS
covered
TURNING
CENTRES
MACHINING
CENTRES
BIG & SMALL
From the big and beefy 5.6 ton XYZ TC 400 Turning Centre,
to the small but mighty XYZ CT 52 Compact Turn
and all sizes in-between.
✔
BIG & SMALL
From the extra large, super heavyweight 25 ton XYZ 3010 VMC,
to the ingenious XYZ 2-OP portable machining system
and all sizes in-between.
Available with
Y axis live toolin
g
XYZ TC 400
XYZ CT 52
300 mm chuck
45 hp
3,300 rpm
78 mm bar capacity
600 mm swing
400 mm max turned dia
150 mm chuck
20 hp
5,000 rpm
52 mm bar capacity
400 mm swing
220 mm max turned dia
XYZ 3010 VMC
SUPER HEAVYWEIGHT
XYZ 2-OP
X travel 3,000 mm
Y travel 1,000 mm
Z travel 800 mm
56 hp
X travel 355 mm
Y travel 305 mm
Z travel 455 mm
3 hp
chinetools.com to see the videos
one the very best in its class, big or small.
cover, free training and free access to the XYZ Programming Helplines.
XYZ Heavyweight VMCs
IN UK
K
STOC
NOW
XYZ Compact Turn 52
IN UK
K
STOC
NOW
XYZ Turning Centres
2 Models
IN UK
K
STOC
NOW
XYZ Extra Heavy Weight VMCs
3 Models
XYZ Oil Country Lathes
IN UK
K
STOC
NOW
XYZ XL 780 & Oil Country Lathes
3 Models
sales@xyzmachinetools.com www.xyzmachinetools.com
DEVON NEWCASTLE BLACKBURN NUNEATON SHEFFIELD LIVINGSTON & LONDON
NEWS • UPDATES • EDITORIAL • ROUND UP
Machinery Trade International is
a controlled circulation publication,
published every Monday by MTI Ltd.
MACHINERY TRADE INTERNATIONAL
Appleby House, Headley Road
Leatherhead, Surrey KT22 8PT
Telephone: +44 (0)1622 859404
Fax: +44 (0)1372 373876
www.mtionline.com
enquiry@machinerytradeinternational.com
SUBSCRIPTION RATES:
Within U.K: £70 pa. Overseas: £105 pa.
To receive your free copy every week
please call +44 (0)1622 859404
Printed in England by The Magazine Printing Company
www.magprint.co.uk
HOW TO CONTACT US:
GENERAL ENQUIRIES
Telephone: +44 (0)1622 859404
Fax +44 (0)1372 373876
Account Manager
Caroline Heath
Telephone: +44 (0)796 7098 094
caz@machinerytradeinternational.com
Sales Director
Giovanni Cerrina Feroni
Telephone: +39 (0)346 233 0694
giovanni@machinerytradeinternational.com
Sales Administrator
Helen Barlow
Telephone: +44 (0)1233 280987
Fax +44 (0)1622 859402
admin@machinerytradeinternational.com
PRODUCTION CO-ORDINATOR
Simon Tilley
admin@machinerytradeinternational.com
GENERAL MANAGER
Janet Barlow
Direct Line: +44 (0)1622 859404
Direct Fax: +44 (0)1622 859402
janet@machinerytradeinternational.com
CIRCULATION
Paul Elsegood
paul@elsegood.co.uk
CONTRIBUTING EDITOR
Steed Webzell
steed@machinerytradeinternational.com
Mobile: +44 (0)797 421 4839
PUBLISHER AND CEO
Bob Sadat
Direct Line: +44 (0)1372 372073
Mobile: +44 (0)7967 098090
bob@machinerytradeinternational.com
© Machinery Trade International
The opinions expressed in Machinery Trade
International are not necessarily those of the Editor
or the Publisher. The Publisher cannot accept
responsibility for errors or omissions, although
the utmost care is taken to ensure that information
contained is accurate and up to date. No part of this
publication may be reproduced without the written
permission of the Publisher.
Follow us on www.mtionline.com/facebook
Contact us via www.mtionline.com/twitter
Delcam
supports DMG
Mori opening
Delcam was the only
CADCAM company invited
to exhibit at the grand opening of
the new DMG Mori Seiki showroom
in Jakarta recently, where staff from
Delcam’s Birmingham headquarters
and the Delcam Indonesia
subsidiary were in attendance. The
Delcam Indonesia booth featured
demonstrations of the company’s
family of CAM software along with
live machining on a DMC650V
vertical machining centre.
During the event, James Slater
from Delcam’s headquarters gave
three presentations highlighting
PowerMill’s five-axis capabilities,
particularly the simulation,
optimisation and verification
of five-axis machining. The
presentations also covered recent
examples of PowerMill being used
on DMG machine tools, including
development work for the Vortex
area clearance strategy on the
DMU160P at Delcam’s Advanced
Manufacturing Facility in the UK.
For further information
www.delcam.com
Production output climbs
Total production output increased by
0.1% between Q3 2014 and Q4 2014,
with the largest contribution to growth coming from
manufacturing. According to the Office of National
Statistics’ Index of Production, total production output
increased by 1.4% between 2013 and 2014. Of the
four main sectors, manufacturing output was the only
one to rise, increasing by 2.7%. Furthermore, total
production output is estimated to have increased by
0.5% in December 2014 compared with December
2013, with manufacturing again showing the only
main sector rise of 2.4%. This was driven chiefly by
sectors such as transport equipment manufacturing.
For further information www.ons.gov.uk
Tata Technologies
plans Euro HQ
Engineering services
firm, Tata Technologies,
has announced plans to develop
a new European headquarters
building in Warwick, UK.
The purpose-built European
headquarters building represents
a £16m investment and will
create 200 additional jobs in Tata
Technologies at all levels, from
graduate to more senior roles. The
building will hold approximately
600 staff in total.
The headquarters will
house Tata Technologies’
engineering support services,
as well as a modern R&D
centre that will further develop
the company’s capabilities and
growth opportunities, especially
in the automotive, aerospace and
industrial machinery sectors. Tata
Technologies expects to move into
the new building in the second half
of 2016.
www.tatatechnologies.co.uk
www.mtionline.com
Winds of
change
A South Korean
energy business
is set to build its European
headquarters on Humberside,
creating nearly 200 jobs in
the wind energy business.
The offshore wind tower
manufacturing facility will be
built after CS Wind was given
a £1m government grant via
the Regional Growth Fund. The
company, a subsidiary of South
Korea’s CS Wind Corporation,
says the extra jobs will be
created in the local supply
chain. The factory will be the
UK’s first dedicated to offshore
wind towers.
www.cswindcorp.com
Brose expands
A Coventry car parts
firm has announced
plans to build a new factory in
the city, creating nearly 500 new
jobs. Brose UK will start work
on its new plant on industrial
land near its base in Colliery
Lane, Exhall, this month.
The plant is part of a £34.8m
investment by the company that
will create 372 in-house jobs
by 2021 – with a further 74 in
the UK supply chain. Brose UK,
which supplies mechatronic
systems for doors, window
and seats to firms like Jaguar
Land Rover, Toyota, Volvo and
Nissan, has been awarded £3m
from the Regional Growth Fund
to support its expansion plans.
www.brose.com
Mills CNC
appointment
Mills CNC, the
exclusive distributor
of Doosan machine tools in the
UK and Ireland, has appointed
John Morning as its business
manager in Scotland. Mr
Morning has over 22 years’
experience in the machine tool
industry and has held a number
of senior sales positions in
leading machine tool companies
over the years – the most
recent of these being that of
sales manager (Scotland) at C
Dugard Ltd. Mr Morning is aged
51 and lives in East Kilbride
with his family.
www.millscnc.co.uk
2 March 2015
6
Nigerian
success for
Westermans
Westermans International
is reporting strong
sales in Nigeria, a country that
the company says has provided
a good source of income in
a difficult global economy.
Indeed, Westermans states
that Nigeria accounted for 15%
of the company’s revenue in
2013, thanks to being home to
clients such as Safety 2000, Iron
Ox Metalworks and AG Vision
Construction.
“While we did see a drop
in sales to Nigeria during 2014,
due in part to unfavorable foreign
currency rates and falling oil prices,
trade looks like it will recover in
2015 as oil prices have begun to
stabilise, and customs regulations
have been improved to make both
importing and exporting goods
easier,” says company director,
Claire Spillane (pictured).
Westermans supplies
equipment such as column and
boom welders, plasma cutters,
generators and CNC machines.
Equipment of this type is used
not just for pipeline and platform
installation, but also for ongoing
maintenance work.
“The kind of heavy equipment
in which we specialise is
something that will always have
fairly steady demand, especially in
emerging markets,” states Claire.
“Lagos in particular is a huge
hub for the oil and gas sector,
with a lot of offshore welding and
fabrication companies operating
from the region. Demand exists for
pipeline welding, civil engineering,
shipbuilding, construction and
marine maintenance. In addition,
the oil industry is thriving as there
have been a lot of improvements
to Nigeria’s infrastructure. This
sector requires heavy lifting and
welding equipment.
www.westermans.com
Riley Surface World,
a reseller of new and
used surface technology plant and
machinery, will be exhibiting in
hall 3 (stand E02) at the Hanover
Fair in Germany on 13-17 April.
The theme of the stand will be
opportunities for manufacturers
or subcontractors to acquire
complete, used process plants
and associated machinery
at greatly reduced prices in
comparison with new capital
equipment. Riley Surface World
is even able to decommission
the plants, relocate them to their
new sites and assist with any
reconfiguration or refurbishment.
Visitors to the show will also
have access to Riley Surface
World’s stock of over 1000 items
of new and used machinery,
covering all surface treatment
and coating categories. This
includes polishing and linishing,
ovens and furnaces, process
cooling, cleaning and degreasing,
shot blasting and peening, dust
and fume extraction and more.
There will be a 10% discount off
all advertised prices for items
purchased during the exhibition.
www.rileysurfaceworld.co.uk
Riley heads for Hanover Fair
www.mtionline.com
Looking good
in Germany
“The German machine
tool industry expects
increased production output
of 3% in 2015 boosted by
developments in the oil price
and the euro exchange rate,”
said Martin Kapp, chairman of
the VDW (German Machine
Tool Builders’ Association) at
the organisation’s annual press
conference in Frankfurt recently.
“The biggest current discernible
risk to our sector is our
business with Russia. Russia is,
or rather was, with a volume of
€500m and a share of 5.5%, the
third-largest market for German
machine tools.”
www.vdw.de
Proving Factory
opens doors
Vince Cable MP,
Secretary of State for
Business Innovation and Skills,
has launched an advanced
manufacturing initiative for the
automotive industry with an
investment of £21.8m from the
public and private sector. The
Proving Factory is a collaborative
project involving major
companies and groups in the UK
automotive industry. It will result
in component manufacturing at
Tata Steel’s site in Rotherham
and an assembly facility in the
West Midlands, managed by
Productiv. The Proving Factory
will industrialise and validate new
technologies and supply them to
vehicle manufacturers.
www.theprovingfactory.com
Fanuc boosts
production
Fanuc says it has
purchased 695,000
sq m of land on the Mibuhanyuda Industrial Park in
Japan to increase production
capacities for the installation of
new CNCs, servo motors and
servo amplifiers, as Europe's
demand for its products grows.
In the UK alone, Fanuc has
seen orders increase across the
board by over 50% in the past
12 months. Fanuc says it will
also expand its R&D facilities in
Japan with the construction of
four new factories.
www.fanuc.co.jp
2 March 2015
8
Renishaw
encoder
enters space
Metrology specialist
Renishaw, has reached
another milestone in the application
of its technology by deploying
products in space for the first time.
The European Space Agency's
Sentinel-1A satellite was launched
last year from the European
spaceport in Kourou, French
Guiana, with Renishaw's new space
encoder technology installed on the
optical communications payload of
the satellite.
The specially developed
space-qualified encoder shares
much of its core technology with
Renishaw's TONiC encoder
range. It is designed to withstand
operating temperatures from
-40°C to +80°C, bombardment by
solar/cosmic radiation and high
mechanical loads consistent with
rocket launch.
www.renishaw.com
Lord Bhattacharyya at WNC
An inspirational centre that is training
the next generation of engineers was
given the VIP seal of approval last month. West
Nottinghamshire College’s Engineering Innovation
Centre, which is training up to 600 students in the
sector, was opened officially by global engineering
icon, Professor Lord Bhattacharyya. Lord
Bhattacharyya, founder of the Warwick Manufacturing
Group, met with students who are studying on a
range of programmes from entry to university level.
The £5.8m centre provides students with vocational
training facilities including dedicated workshops for
mechanical engineering, fabrication and welding.
For further information www.wnc.ac.uk
Simtek appoints Cutwel
UK and Ireland tooling
supplier Cutwel has
become a new agent for Simtek, a
German manufacturer of internal
and external machining systems.
With more than 12,700 tools
available, Simtek manufactures
tools to cover almost any
application, including grooving,
threading, boring, turning and
milling, and offers a quick
turnaround on special requests.
The Simturn range, for
example, offers various tooling
systems for internal and external
applications – each range has
been structured and optimised
for particular bore diameters.
Simmill is another highlight from
the Simtek range that uses solid
micro-grain carbide milling cutters
with multiple cutting edges for
a range of milling operations.
Simtek has just released a 700
page catalogue which is available
to request now.
www.cutwel.co.uk
www.mtionline.com
Ryazan PT 604 Deep Hole Borer 4000mm
Asquith Butler CNC Elgamill
Poreba TPK90 x 6000mm Centre Lathe
30-100mm Solid Boring Capacity x 4000mm,
Counter Rotation Head, Retrofitted Electrics 2014/15
NEW 1997, Model HE4000S, 8000mm Table, 6200mm
Travel, 4th Axis, Tool Changer, Heidenhain Control
NEW 1986, 930mm x 6000mm Capacity,
Taper Turning, Power Feed to compound
Broadbent 15” BSO Oil Country Lathe
Hwacheon MEGA 100 CNC Lathe
DSG Type 25P x 120” Lathe
NEW 1980, 15” Hollow Spindle, Front & Rear
Chucks, Semi Auto Threading Cycle with Kick Out
NEW, Fanuc OiTD Control, 1000 x 4000mm Capacity,
255mm Spindle Bore, Boring Bar Attachment
REBUILT 2012, Front & Rear Chucks, 255mm
Hollow Spindle, DRO, Taper Turning & Air Kick Out
Webster & Bennett Vertical Borer
Giddings & Lewis Horizontal Borer
Union BFT 80/2 Horizontal Borer
New 1971, Model 144” DCH Chuck 3350mm,
Max Swing 3708mm, Height Under Rail 2135mm
Model 80B-130T, 130MM Spindle, Table 2490 x
1520mm, 3 Shear Column, Air Lift Rotary Table
80mm Spindle, 3 Axis DRO, Pendant Control,
1000 x 1120mm Table
Waldrich Siegen Roll Grinder WSF
Behringher Double Column Band Saw
Webster & Bennett 48” DH Vertical Borer
6 x 4500mm. Max Swing 750mm, Max Length
4,500mm, Max Weight 6,000kg, Year 1978
NEW 1989, Model HBP 800/1050, Semi Auto
800 x 1050 Capacity
48” Table, DRO
Machine Guards
New face
at KMWE
Precision component
specialist KMWE
says that Robbert van der
Kruk has been appointed as
director of development and
engineering. Mr van der Kruk
will also be responsible for the
KMWE Projects Division and
the joint venture IDEAS (Inde
Dutch Engineering Aerospace
Services), based in India. In
addition, KMWE’s development
and engineering activities will
be further expanded at its
facility in Malaysia, while the
company also has the objective
to commence operations later
this year in North America.
www.kmwe.com
Fourth HTEC
Swedish Haas Factory
Outlet, Edströms
Maskin AB, is celebrating the
opening of the latest Haas
Technical Education Centre
(HTEC) in Sweden, at the
Yrkeshögskolan/CVL Centrum
för vuxnas lärande (Centre for
adult learning) in Sandviken,
around three hours north of
Stockholm. The upgraded
training facility is the result of
collaboration between the school
board, the municipality, Haas
Automation, HFO Edströms, and
the Swedish engineering giant
Sandvik, located just 4 km away.
As well as being the 4th HTEC
in the country, the new facility is
the 86th HTEC in Europe as a
whole.
www.haascnc.com
LVD launches
Touch-i4
As Industry 4.0
becomes increasingly
relevant to the sheet
metalworking industry, LVD has
responded with a technology
that gives shop managers
production information in real
time. Touch-i4 is an industrial
strength Windows-based tablet
that provides an overview of
the entire fabrication workshop:
generating and presenting
the live information needed
to manage networked LVD
laser, punching and bending
machines.
www.lvdgroup.com
2 March 2015
10
Wallwork
invests in
HT capacity
With an investment
topping £2m, the
Wallwork Group has expanded
and upgraded the vacuum heat
treatment department at its
Birmingham facility. Housed in
a newly refurbished building
and supported by a grant from
Birmingham City Council, the
department provides high vacuum
heat treatment using modern
furnaces of different capacities
for the thermal processing of both
high and low batch metal parts.
Seven new positions have
been created at the Birmingham
facility as a direct result the
investment. Indeed, there are now
seven vacuum furnaces on site
ranging in load capacity from 250
kg to 4 tonnes. This includes one
of the largest furnaces in the UK,
which accepts loads of 4 tonnes
and over 2.7 m³ in size. The
company also operates from sites
in Manchester and Cambridge.
www.wallworkht.co.uk
KMF packing a punch
Staffordshire, UK-headquartered KMF
(Precision Sheet Metal) has expanded the
capacity of its facility in Trenčianske Stankovce,
Slovakia with the addition of a Trumpf Trupunch
3000 punching machine. The machine, with its 1000
hits/minute punch rate, will be used to enhance
the service already provided to customers across
mainland Europe, particularly those that have
the need to outsource larger volume production.
"The new machine will also enhance the offering
we can make to customers due to its tapping and
forming capability," says Radim Vaculín, the facility’s
business manager.
For further information www.kmf.co.uk
£5m for University
of Nottingham
The University of
Nottingham has been
awarded £5m by the D2N2 Local
Enterprise Partnership as part of
a Growth Deal expansion which
will help create a major new 8000
sq m centre for manufacturing to
attract future generations of world
class engineers to the city.
The new manufacturing
building will be home to the
University’s Institute for Advanced
Manufacturing (IfAM). The move
is part of a £100m investment
in manufacturing research and
training at the University of
Nottingham over the next 10
years, comprising funding from
the university, research councils,
industry, government and the EU.
www.nottingham.ac.uk/
manufacturing
www.mtionline.com
GREAT SPRING DEALS!
HWACHEON – KIHEUNG – SFM – DAH LIH
LARGE FRAME HEAVY DUTY CNC LATHES
AND MACHINING MACHINES – ALL IN STOCK
Hwacheon VT1150
Vertical CNC Lathe
Hwacheon Hi-Tech 850YLMC
Driven Tool Turning Centre with ‘Y’ Axis
Fanuc 0iTD with
Manual Guide,
40” hydraulic chuck,
Max. turning dia
1150mm,
Max. turning
length 950mm,
12 station turret,
65HP main motor
(twin range).
Fanuc 0iTD with Manual Guide, 32” hydraulic chuck,
Max. turning length 3500mm, 12 station turret,
60HP main motor (4 range), Driven tools (BMT85).
Hwacheon Hi-Tech 700MC
Driven Tool Turning Centre
Fanuc OiTD with Manual Guide, 24” hydraulic chuck,
Max. turning length 2000mm, 12 station turret, 50HP main
motor (twin range), Driven tools.
2 es
hin
Macilable
a
v
A
Dah Lih MCV-1700
Vertical Machining Centre
Fanuc 0iMD with Manual Guide, X=1700mm,
Y=800mm, Z=750mm, 32 ATC, BT50 Spindle.
SFM CST42160 Long Bed CNC Lathe
Fanuc 0iTD with Manual Guide, Swing over bed: 1070mm,
4,000 between centres, 50 HP main motor, Twin steadies,
Twin conveyors, 610mm 4 jaw chuck, Boring attachment.
SFM CST46200 Long Bed CNC Lathe
Fanuc 0iTD with Manual Guide, Swing over bed: 1170mm, 5,000mm
between centres, 50 HP main motor, Double chuck headstock,
2x610mm 4 jaw chucks (14” bore), Twin steadies, Boring attachment.
KIHEUNG KNC U1000/3100Y
Heavy Duty CNC Universal Milling Machine
Heidenhain i530 CNC system, Bed size: 3600mm x 1050mm,
X=3100mm, Y=1350mm, Z=1250mm, 50HP main motor
(twin range), Automatic universal head, 24 ATC, Conveyor.
Call us today for a great DEAL
Auction SPOTLIGHT
Auction Spotlight
Cottrill & Co is holding an online
auction of machinery used previously by Renold
Engineering, UK. Lots include: a Holroyd universal worm
grinder; a Holroyd automatic cycle swivelling head worm
milling machine; a Sunderland 5A gear planer with micro
process controls; a Goulder Mikron SF/P gear testing
machine; and a Holroyd gap type gear tester. Viewing is
by appointment only. Bidding ends on 10 March at 15:00.
+44 (0)121 328 2424 www.cottandco.com
1st Machinery is staging an online auction of
machine tools located in the Midlands, UK. Lots include:
a Ward 10C lathe; a Ward 8 lathe with collet attachment
and barfeed; a Ward 10/13 lathe; a Ward 7D lathe; a
Herbert 9C-30 lathe; a Ward 7D lathe with copy turning
attachment and DRO; a Ward 7C lathe; three Ward
7 lathes; a Herbert 7 lathe with pneumatic chuck and
turret; and a Herbert 7B lathe. Viewing is by appointment
only. Auction date is 12 March at 15:00.
+44 (0)2476 992205 www.1stmachineryauctions.com
1st Machinery is staging an online auction of
Haas CNC milling machines located in the Midlands, UK.
Lots include: a Haas VF-6SS (Super Speed) five-axis
vertical machining centre with Haas TRT 210 tilting/rotary
table; a Haas VF-5SS vertical machining centre featuring
Renishaw probe system and lots of other options;
and two Haas VF-4SS vertical machining centres with
Renishaw probe systems and lots of other options.
Viewing is by appointment only. Auction date is 19 March
at 15:00.
+44 (0)2476 992205 www.1stmachineryauctions.com
IAG is conducting an online auction of equipment
used previously by two wind turbine manufacturers (FD
Coiper and Comonor) in Ponferrada, Spain. Lots include:
a Sertom EMO-30/60 bending rolls machine; an Esab
CAB460 submerged arc welding column; a Lincoln/Bode
DC 1000/TRC submerged arc welding column; a Kaeser
DSD 241 compressor; and other equipment for welding,
assembling, blasting, painting and sheet forming. Sale
takes place on 20-27 March.
+34 638 959226 www.iagauction.com
Perfection Industrial is hosting an online
auction of machinery located in the United Arab
Emirates. Lots include: a 3600 x 3740 mm Wagner Bank
710 D1800-22-IV-150 heavy duty lathe (rebuilt 2004); a
Titan CNC horizontal boring mill; a Sangjin 970 grating
line; a Bertsch 3600 x 100 mm plate roll; a Kaltenbach
CNC drill and saw line; and various mobile and container
cranes and lifting equipment. Viewing is by appointment
only. Sale closes from 24 March.
+1 708 606 3240 www.perfectionindustrial.com
Upcoming
features
9 March
Workholding
16 March
Laser, punching,
waterjet and
plasma
23 March
Sawing
30 March
Metrology
FOR MORE AUCTIONS, SEE Pages 33 – 41
Auction Spotlight
Industrial auctioneers; plant, machinery and
equipment appraisals, valuations and auctions
sweeney-kincaid.com
All Enquiries: +44 (0) 141 570 4000
Tel: +44(0)207 098 3700
Email: sales@go-dove.com
international.go-dove.com
P lant & M achinery O nline a uctiOns ,
V aluatiOns a nd O utright P urchase
CALL 02476 992205
EMAIL: INFO@ISTMACHINERYAUCTIONS.COM
2 March 2015
12
www.mtionline.com
CNC MACHINING CENTRES AND MILLS
feature
MNB opts for Ward
CNC machines
MNB Precision is
investing more than
£1m in its future, establishing
new and larger headquarters in
Coventry to house a portfolio of
machine tools that will include
additional top-of-the-range
Soraluce milling and Hartford
machining centres from TW Ward
CNC Machinery (Ward CNC).
MNB Precision has developed
a reputation for tackling complex
parts in difficult-to-machine
and exotic materials such as
Inconel, beryllium copper and
non-magnetic stainless steels.
Rapid growth over the past few
years has prompted continuous
investment in new machines
to expand its capabilities and
capacity. Indeed, the company’s
machine portfolio already
includes a host of Ward CNCsupplied machines – five Hartford
machining centres and two
Soraluce milling machines.
It has been the reliability
and success of these machines
– coupled with customer
encouragement to continue to
invest in these brands – that
spurred the latest wave of
investment in the Soraluce
FL8000 travelling column
milling centre and Hartford
double column Blockbuster
PRO 3150AG machining centre,
as MNB Precision’s business
development manager Will
Melly explains: “Our expanding
order book, not only within
the oil and gas sector, was
putting increased pressure on
the throughput of our existing
machines, which are sited in
three separate but co-located
facilities that the company has
steadily acquired as we have
expanded.
“The imminent move to our
new site, which will effectively
double our floor space and allow
all machines to be housed under
the same roof, will certainly help
us to improve the logistics of
machining and further streamline
our processes,” he continues.
“Coincident with this major
expansion is our determination
to widen our customer base,
enabling new clients in sectors
like nuclear and aerospace to
exploit our expertise. It was with
this in mind – and a dogged
determination to continue to
provide all customers, existing
and new, with exactly what they
need in terms of machining
capacity – that we turned to Ward
CNC again.”
www.wardcnc.com
components up to 560 mm
diameter. The machining centres
are all grouped together in the
new factory, with room available
for the further expansion plans
that JKP Engineering has already
mapped out.
“The positive trend in
business since we relocated
has seen turnover continue to
rise, and the improved facilities
and location, just at the junction
of the M1 and M18, has seen
increased interest from new
customers,” says Mr Holt. “As a
result, in partnership with XYZ,
over the next 18 months we will
add another seven VMCs to our
capacity list to meet increased
demand.”
In terms of machine quality
Mr Holt is equally quick to
praise XYZ saying: “When we
take delivery of a machine we
monitor its performance closely
by running a test part upon
installation and again on a
regular basis. The most recent
tests that we ran on the XYZ
VMCs showed them to be as
accurate today as the day they
were delivered.”
www.xyzmachinetools.com
Productivity boost
fuels JKP relocation
The growing confidence
in the engineering
sector in and around Sheffield
prompted JKP Engineering (UK)
to invest £500,000 in relocating
from its existing premises in
the city centre, to larger, more
suitable premises earlier this
year. The move was funded in
part by productivity gains made
through a previous investment
in CNC machining capacity from
XYZ Machine Tools.
“We started the business 15
years ago with just one machine
tool and have gradually added
on when we had the free cash,”
says Andy Holt, managing
director. “This recent move was
no different, but was accelerated
when we purchased our first XYZ
machining centre. The increased
productivity that we achieved
generated new business and
improved profitability which
allowed us to bring forward
2 March 2015
14
the move, but not before we
had invested further in XYZ
machining centres.”
JKP Engineering now has
six XYZ machines, the latest of
which is a XYZ 1020 VMC with
a 300 mm 4th axis option that
allows the company to machine
www.mtionline.com
feature
Bridgeport provides
capacity and capability
Increasing the capacity
and capability of its
machine shop with two new
Hardinge Bridgeport machining
centres will ensure vintage and
historic car replica and restoration
specialist Tom Dark Engineering
maintains its pole position in this
highly competitive field. The two
machines were supplied by the
Engineering Technology Group
and have fitted seamlessly into
the company’s manufacturing
operations.
“Some of the replica’s
we create are of high value,
legendary cars from the likes
of Maserati, Bugatti and MG,”
explains founder and managing
director, Tom Dark. “Our
reputation has been built on being
able to recreate anything from an
obsolete suspension component
to a complete competition or road
ready car, and to do that we have
to have the manufacturing support
infrastructure.”
Tom Dark’s machine shop
and assembly plant is located in a
converted, custom designed barn
near Kiddington, Oxfordshire.
“We have a mixed workshop
capability but were very careful
when we specified the two
Hardinge machines to ensure they
gave us the optimum capacity
when we need it, coupled with the
precision, capability and reliability
essential in the business,” says
Mr Dark.
The company has acquired a
new Bridgeport XR 760 VMC and
a large capacity Bridgeport GX
1600 VMC, both of which provide
www.mtionline.com
the scope to machine large
components such as a complete
cylinder block casting to the
plethora of small components that
make up a car or sub-assembly.
“An in-house cylinder block
machining capability is important
to us because we also machine
pistons and camshafts, giving us
complete process control,” says
Mr Dark. “In the past, we have
machined blocks from billets not
castings – a Bugatti Type 50B
engine comes to mind – and that
whole project probably entailed
some 6000 hours of machining
and building.
“The Bridgeport machines are
undoubtedly the cornerstone of
our manufacturing operations,” he
concludes. “In the past we have
operated a range of Bridgeports,
so we are long standing users and
they have held us in good stead.”
www.engtechgroup.com
2 March 2015
15
feature
Heller machines
achieve 95% uptime
Following a
management buyout
(MBO) in 2009, one of the UK's
largest aluminium diecasters,
Welshpool-based CastAlum,
started adding value to its
products by machining some of
its castings. The development
was triggered by the award of
two major, long term automotive
contracts for the supply of
machined steering gear housings
and transmission cases. Until
then, all castings had been
delivered to customers in their raw
state for machining further along
the supply chain.
The projected production
volumes from the two new
contracts, which in 2015 will
require CastAlum to machine
700,000 castings, warranted
consideration of a transfer line.
However, it would have been
difficult to adapt if the automotive
components change in the
future. It would also have meant
a substantial investment before
the volumes had ramped up,
with potential to cause cash flow
problems.
Sequenced purchase of twinpallet, four-axis, horizontal-spindle
machining centres was deemed
to be the answer, as they could
be installed progressively to suit
rising throughput and are easy to
reconfigure to produce almost any
component.
Peter Radcliffe, CastAlum’s
chairman and one of four directors
involved in the MBO, says: “After
initial cutting trials we chose Heller
H2000 HMCs as the supplier
offered the best value turnkey
package and had a reputation
for good after-sales service. This
was key, as the initial two HMCs
installed in quick succession
during 2009 were our first
machine tools.
“Another factor that steered
us toward Heller was its close
working relationship with tooling
firm, Mapal, whose cutting tools
are used extensively in the
automotive industry.”
A total of 10 H2000 HMCs
now populate the main production
hall at Welshpool. Each is able to
machine any type of steering gear
housing or transmission case in
two operations.
Keith Brown, CastAlum’s
managing director, who was also
involved in the MBO, adds: “The
Heller machining centres have
an average uptime of 95%, which
is very high for manually loaded,
twin-pallet machines. This is
due to efficient presentation of
material to the second pallets, and
from there to the spindles, which
minimises changeover times.”
www.heller.biz
trunnion pivots and drives take up
a lot of space.
Additionally, Mr Gleeson
points out that the DMU table’s
swivel axis is from front to back,
in the Y-axis, unlike with most
trunnion machines on which the
swivel axis is in X. If the DMU
table is tipped up to 90° and
locked, there is a lot of clearance
for machining longer parts than
would normally be possible.
Duckworth & Kent has frequently
used this capability, which avoids
the need to use an angle bracket
for fixturing components.
The versatility of the machine
coupled with the low cost of fiveaxis manufacture has also resulted
in work queuing for the DMU 50.
It is the most accurate machine
currently on the shop floor, easily
able to hold ± 5 µm tolerance,
thanks in part to the optional linear
scales fitted in X, Y and Z.
The machine features an
18,000 rpm/35 kW spindle, 24 m/
min rapid traverse, tool and part
probing, and a Heidenhain-based
DMG ERGOline control with 19"
colour screen and 3D software.
www.dmgmori.com
Subcontractor expands
five-axis machining
Reading-based
precision engineering
company, Duckworth & Kent,
which specialises in low-tomedium volume production of
complex components in difficultto-machine materials, has
purchased a DMU 50 vertical
machining centre from DMG
Mori to strengthen its five-axis
machining capability.
The machine is the first on
site capable of interpolative
machining in all five axes
simultaneously, although to date
it has been used exclusively
for three-axis work with the
rotary CNC axes positioned and
clamped. A move to full five-axis
machining is planned.
According to managing
director Terry Gleeson, the DMU
50 was selected as its footprint
was small – space on the shop
floor is limited. The machine
2 March 2015
16
also happened to cost less than
the other shortlisted model. A
further advantage of the DMU
configuration is that the -5°,
+110° swivelling rotary table
offers a larger clamping area than
tables on equivalent trunnion-type
five-axis machines, on which the
www.mtionline.com
focus on
metal
Huvema’s extensive range of production machines includes a wide range of features
and high build quality as standard to meet the most demanding industrial applications.
Lathes
Radial drilling machine
CRDM 3050x1600 Topline
HU 430x1000 VAC Topline
with Newall DRO
Bandsaw machines
HU 4VK Newall
4 Topline
BMSY 325C
Industrial drilling machines
HU 32 Super Vario
Milling machines
To view the full range of Huvema products and machine specifications
please visit www.huvema.co.uk
For further details email sales@huvema.co.uk or call +44 (0)1283 791166
Unit 6, The Old Station Road, Croxall Road, Alrewas, Burton Upon Trent, DE13 7BD, England
feature
Starrag machines
keep BAE on course
The Starrag Group
currently has 43
machine installations on the BAE
Systems site in Salmesbury –
and all are achieving availability
rates of better than 95% as a
result of an ongoing ‘continual
progress’ partnership with the
Swiss machine tool builder based
on a programme of planned
maintenance.
Included in the portfolio
of Starrag machines at the
Lancashire site are twin, eightmachine FMS systems installed
three years ago in 610, the
machine shop dedicated to
titanium production. The 9000
sq ft facility is responsible for
producing 75 different components
for the Lockheed Martin F-35 joint
strike fighter jet, part of the biggest
recorded weapons programme in
history, with each plane reported
to cost some $100m.
Other facilities house, for
example, nine multi-million pound
Starrag Group Droop + Rein
machines. These are installed
in air- and humidity-controlled
booths and are producing profiles
and holes in hybrid titanium/
composite 3D panels ready for
assembly. This new method
of ‘direct-to-line’ assembly
eliminates any normal time
consuming ‘fitting’ operations as
part of the aft and vertical tails for
both the BAE Systems Typhoon
and F-35 fighter jets.
Even with such a number
of Starrag machines, BAE’s
commitment to investment is
not abating: further equipment
from the Swiss builder,
including an extension to the
existing FMS set-ups and
an additional, duplicate fourmachine installation, are on the
company’s order schedule to
meet strengthening F-35 volumes
and the upward forecast of some
3000 total flying units to be built
in the UK.
As a result, maintaining ROI
targets and ensuring annual
cost-down ratios are met through
productivity gains, means
machine availability is a primary
concern. And by working jointly
with Lockheed and the Starrag
Group, the 43 machines are on
record for maintaining better
than 95% availability, which
ensures the target utilisation of
85% for the planned load time
is achieved. To help with this,
Starrag has engaged its own
onsite manager at Salmesbury
with the support of six technical
engineers, who are also
permanently onsite.
www.starrag.com
the in-cut elements of the cycle
are shorter, as metal removal is
fast with the 26 kW/15,000 rpm
spindle.”
Large reductions in machining
times are evident across many
aerospace and automotive parts
produced in the cell by BCW
for well-known companies such
as Airbus, Messier Dowty, GKN
Driveline, JLR, Ford and Aston
Martin. The subcontractor is
a first tier supplier to many of
them, developing and supplying
prototypes as well as delivering
production components to tight
schedules.
The performance of
the new 40-taper, four-axis
MB5000H, which has 500 x 500
mm pallets and a machining
volume of 760 mm³, has
been so impressive that the
subcontractor has standardised
on Okuma for all future HMC
purchases. Mr Kilfoyle says
that the decision was reinforced
by NCMT’s installation and
commissioning of the machine,
which he described as the most
professional to date of any
supplier to BCW’s four factories
in the Burnley area.
www.ncmt.co.uk
Productivity doubled
at BCW Engineering
Subcontract machinist,
BCW Engineering, has
installed a Japanese-built Okuma
MB5000H horizontal machining
centre with a 10-pallet pool
to add capacity for producing
high precision components for
the aerospace, automotive and
off-road vehicle sectors. The
machining cell was delivered by
UK agent, NCMT, to BCW’s new,
30,000 sq ft unit in Burnley.
Tony Kilfoyle, group
engineering director says: “One
aluminium aerospace part we
machined on another make of
twin-pallet HMC took 23 minutes
to complete, whereas the Okuma
needed just 11 minutes. The
reduction is partly due to being
able to present a component
on its pallet to the spindle more
quickly – as it comes out of the
pallet pool already fixtured, so
set-up does not delay the start
of the next cycle. Changeover is
therefore limited to the automatic
2 March 2015
18
pallet change time, which is no
more than 35 seconds.
“Once the part is being
machined, the cycle is quicker
because idle times are short due
to the 60 m/min rapids in the
linear axes and 2.5 seconds tool
change,” he adds. “Additionally,
www.mtionline.com
GLEASON-PFAUTER CNC-gearprofile grinder P 1200 G
yr. 2007 Ø 1200, SIEMENS 840 D,
with measuring
REISHAUER Universal Thread& Worm-Grinder UL 900
yr. 1990 Ø 250 x 900 mm,
relieve grinding attachment
MIKRON CNC-gear hobber
A 35/36 Ø 200 x Mod 4 x 300 mm
with workpiece loading
SCHAUDT CNC-cylindrical grinder
PF 7 UB 4000
yr 91, Ø 700 x 4000 mm x 3000 kg,
SIEMENS 880, gauge ctrl
HANS-JÜRGEN GEIGER Maschinen-Vertrieb GmbH
James-Watt-Straße 12 • D-72555 Metzingen (Germany) •
Phone +49(0)7123/18040 • Fax +49 (0)7123/18384 •
E-Mail: Geiger@geiger-germany.com • www.geiger-germany.com
Furthermore
we have 200
gear machines
and more than
500 modern
machine tools
in stock !
Please check
our website for
pictures and
data !
feature
PAL Robotics installs
Haas Mini Mill
PAL Robotics is based
on the third floor of
an office building in central
Barcelona, a few minutes by car
from the city’s busy and famous
Las Ramblas promenade. The
company, run by Italian CEO
Francesco Ferro, is building a
reputation for its cutting-edge,
innovative humanoid robots used
in service applications such as
hotels and shops, as well as in
warehouses and supermarkets.
To the layman, these are humansized robots that look, move
and sound like automatons from
science fiction movies. But,
they’re not fantasy. They are in
fact advanced, highly engineered
creations, designed in-house by a
group of talented engineers.
Up until now, all of the metal
parts used to make a robot
have been sourced from various
external subcontractors and
suppliers in Spain and overseas.
“Using subcontractors has
its advantages, but also some
serious limitations, especially
during the prototype and
development phase of a new
design,” says Mr Ferro. “For
example, a complex assembly
such as a hand includes very
precise metal parts. We make
many changes and improvements
with an iteration of the design
process. Sourcing the parts
externally can slow down the
prototype process considerably.
“The Haas Mini Mill is the
perfect size and power for
our workshop,” he adds. “As
it’s our first CNC machine, it’s
also important that it’s easy to
program and use, and that it’s
reliable. I didn’t know much about
Haas before we bought it, but
when I started to investigate,
I discovered very good things.
The price and performance were
exactly what we were seeking.”
Shown in the accompanying
photograph is REEM: C, the
third version of a full-sized,
humanoid robot. With battery
life up to eight hours, PAL says
‘she’ can be used, for example,
as a receptionist at an event or
trade show, can entertain and
compliment guests, provide
dynamic information and even
make presentations and speeches
in many different languages.
www.haascnc.com
Tel ++48 56 658 66 22
Fax ++48 56 658 66 23
Email sales@ahinvestment.pl
www.ahinvestment.pl
Heavy Duty Lathe sCHNeIDeR sFAG T 53
Technical condition good. Turning length 10.000 mm.
Turning diameter 2000 mm. Bed width 1500 mm.
Horizontal Boring and Milling Machine UNIoN WMW BFKP 110 CNC
New 1990. Control CNC 800-3. Rotary table 1250x1600 mm.
Spindle diameter 110 mm. Spindle ISO 50. Facing disc 640 mm.
Max turning 1140 mm. X- 1600 mm/ W- 630 mm/ U-200 mm /
Z- 800 mm /X -2000 mm. Max weight of workpiece 12.500 kg.
2 March 2015
20
Vertical Turret Lathe
RAFAMeT KCG 200
New in 1978.
Technical condition
good – still under
power.
Turning diameter:
2130 mm,
face plates:
2000 mm.
Max turning height:
1250 mm,
workpiece weight:
10,000 kg.
Thread Rolling Machine UPWs 16
New in 1989.
Technical condition – very good.
Pipe Lathe RIAZAN 1M983
New in 1981. Technical condition: very good.
Machine has 2 chucks front & rear.
RoLLeRs
Diameter of all sets of roller is 54 mm
www.mtionline.com
More than 175 Lathes & 60 CNC Lathes
12
000 €
10
INDEX 170M
000 €
e
2
Must3b1st March
PINACHO SMART TURN 310VS
Max Ø : 370mm – BC : 450mm
Bore Ø : 42mm – SINUMERIC
€er.
0ur 0
0
contaeinfore
0
o
5
y
b
ed
d in
Loade remov 015
HC : 310mm – BC : 1625mm
Max Ø : 620mm – GE FANUC QUICK PANEL
SCHNEIDER-SFAC WSD 55II
HC : 850mm - BC : 8000mm
Maximum swing over cross-slide : 1400 mm – Maximum swing over bed : 1700 mm
Max admitted weight between centers (80 rpm) : 19000 kg
Max admitted weight between centers (20 rpm) : 35000 kg
More than 125 press brakes & 120 Guillotine Shears
0€
0€
0€
25 00
nes
2 machi
in stock
0€
12 00
17 00
15 00
!
AMADA HFBO 100/3
100T – 3220mm 8 axis – Operator 2
AMADA ITPS 100/3
100T – 3000mm – DELEM DA 65R
AMADA GPN 630
6 x 3050mm – with conveyor
HACO HSL 3016
16mm – 3050mm
More than 180 CNC & Conventional milling machineS
0€
29 00
0€
0€
46 00
3 500
75 00
€
ALCERA
803
800x300x500mm
Table :
1200x200mm
ANAYAK VH-V 1800
1600x920x900 – Table : 1800x700mm
4 axis – Heidenhain TNC 426
SACHMAN ARAKOS 521
3000x1050x1500mm
HEIDENHAIN TNC 415
UNION BFT 130/7
2235x1620x1020x1020mm
Heidenhain TNC 426 – Spindle Ø : 130mm – 5 axis
More than 50 Machining Centers
0€
31 00
AWEA BM 1020
1020x600x600mm – Table : 1120x600mm
FANUC Oi-MC
0€
6 000
12 00
nes
2 machi
0€
€
13 00
!
in stock
FAMUP MCP 70E
700x480x640mm – table : 600x450mm
Siemens 840D – 2 pallets
KONDIA B 1000
1000x500x500mm – Table : 1200x400mm
Heidenhain TNC 355 – 4 axis
LEADWELL VMC 40
1020x510x510mm – table :1200x500mm
4 axis – Mitsubishi
More Than 50 CNC Punching Machines & 50 Bending Rolls
0€
19 00
AMADA ARCADE 210
20 T – 6,4mm – 1500x3000 m/mn
0€
45 00
AMADA EUROPE 258
20T – 6.4mm – 1270x4000mm
0€
0€
20 00
45 00
nes in
3 machi
stock !
AMADA ARIES 245
20T – 4,5mm – 1000x2540mm
And Much Much More…
DAVI IT4R 30/E
30x3050mm
Metal Cutting
EDM / GRINDING / HONING / LATHES
Hunton Punch and
Die Grinders
make it easy
for punch
operators to
maintain
sharp
cutting
edges
on
punches
and dies.
6+)/'2/898/49.+
8:662>'4*7+(:/2*5,
Supplier of fully refurbished
Wire & Die Sink EDM machines
Consumables, Spares, Service &
Technical Support
+ '36
(: 2+
/2*
Tel: +44(0)1233 631554
Fax: +44(0)1233 631888 1823
**/9/54'28+7;/)+8/4)2:*+
Agiecut 150HSS
Classic v3
Fanuc Alpha 0Ia,
Alpha 0C,
Alpha 1B
W0, W4
• Robust
construction
• Manufactured
in the UK
40 Quality used machines in stock
Charmilles robofil:
240, 4020si, 4030si
roboform:
30, 40, 4000, 200
• converts surface
grinders to rotary work
A'4:'25497528
A')./4+8)'4(+8:662/+*
+(:/29 +)54*/9/54+*
57;+7.':2+*
A/4)/44'9/86'7+6'798
Visit our website for a full stock list
Tel: +44(0)1594 826779
Email: sales@edm.co.uk
Web: www.edm.co.uk 1414
Middlemore Lane West,
Redhouse Industrial Estate,
ALDRIDGE, Walsall,
West Midlands WS9 8BG, UK
Tel: +44 (0)1922 745075
Fax: +44 (0)121 378 3291
Email: enquiries@ajbaker.com
www.centrelessgrinders.com Delapena
SpeeDhone
Hand hone
machine
with central
foot pedal
and variable
speeds
between
250 – 1000
rpm. Suitable
for small and
medium size
batches of
1.14mm to
79.37mm.
For further details contact
Penico Gauges Limited
2046
Tel: +44(0)1274 511 044 Fax: +44(0)1274 510 770
penicogauges@yahoo.co.uk www.penico.com
50vat
,7rks +
£e5x wo
22
Specialists in Charmilles, Agie and Fanuc
Penico RoTARY
GRinDinG TABLe
75
,9
£1
www.mtionline.com
2
March
2015
GauGes Limited
Star JNC-16 Sliding Head CNC Lathe
Fanuc OTA CNC Control. LNS Hydrobar Bar
Feed. Maximum Machining Diameter 16 mm.
Maximum Stroke Of Headstock 160 mm.
Spindle Speeds 375-7500 rpm. Twin Opposed
Tool Posts Giving 6 Tools. #77664.
Email: sales@apperleyhoning.co.uk
Tel: +44 (0)1242 525868 1085
Email: jet@jetmachinery.eu
Tel: +44 (0)1384 633968
1724
• Standard Accuracy & Super Precision Manual Scroll Chucks
• Gripfast Combination Power Chucks • Oil Country Chucks
• Large 3 & 4 Jaw Independent Scroll Chucks
Phone: 01924 415000
Email: sales@600uk.com
Web: www.pratt-burnerd.co.uk
HitacHi SEiki HicELL 40
Tel: +44(0)1638 578764 Mobile: 07932 548923 Email: tony.bennett@talktalk.net
40 multi axis CNC Turning
and Milling Centre
Harrison M500
Gap Bed Lathe
Swing 500m/m. Distance
B/C 1500m/m. Spindle
Speeds 31-1600 r.p.m.
New 300m/m 3 jaw Chuck.
Large 3 point Roller
Steady. Quick Change
Tool Post. LV Machine
light. D.R.O 2 Axis.
Recommended (Sleervue
Sliding Chuck Guard).
£7,250.00 Ex.Works
1835
Year: 1995; Seicos L111 control; swing over bed
700mm; turning dia. 381mm x 2500mm long;
5 controlled axes ( 4 feeds ) X, Z, Y and C; two driven
tool stations, Z and Y, horizontal and vertical; tool
changer, 120 tool carousel, with over 100 pieces of
tooling; 480mm 3 jaw chuck fitted with A2-11 mounting;
spindle speeds 20 to 1800 rpm; spindle bore 120mm
dia.; 30Kw motor; programmable steady and tailstock.
New England Engineering Ltd
Tel: +44 (0)121 5449867
E: machines@newengland.co.uk W: www.newengland.co.uk
USETEC  karlSrUhE, gErmany
Planning on visiting
(13 th – 15 th April 2015)?
Come and meet the mTI team
HWACHEON HI-TECH 200B CNC LATHE
HWACHEON HI-TECH 200BMC DRIVEN TOOL TURNING CENTRE
KIHEUNG U1000/31000
CNC Universal Milling Machine
QUASER MK60 11H TWIN PALLET
HORIZONTAL MACHINING CENTRE
AS NEW ONLY 700 HOURS USE. Installed: 2013, Fanuc 0iTD,
10” Chuck, 12 st. turret, quick tool setter
Installed: 2010, Heidenhain i530 CNC, A4 automatic head,
bed size: 3,600mm x 900mm, X=3,100mm, Y=1,250mm,
Z=1,050, 24 ATC, through spindle coolant
Installed: 2010, Fanuc OiTD, 10” Chuck, 12 st. turret,
driven tools, chip conveyor (2 machines available)
Installed: 1999, Fanuc 18M CNC, Pallet size: 500mm x 500mm,
X=710mm, Y=610mm, Z=610mm, 60 ATC, chip conveyor,
through spindle coolant
FORTE AUTO
BANDSAW
16” capacity
with roller conveyor
Year: 1981
DSG TYPE 25 X 120
‘MANUAL PLUS’ CNC LATHE
Year 2003, Heidenhain CNC, quick change tool post,
3 + 4 jaw chucks, conveyor
Metal Cutting
OKK PCV-60 CNC VERTICAL
MACHINING CENTRE
www.mtionline.com
2
March
2015
24
MORI SEIKI SL-25B CNC TuRNING CENTRE
Okk PCv-60, Year: 1995, Control:
Fanuc 18M, Table: 1200mm X 600mm,
Traverses: 920mm X 600mm X 520mm,
Spindle Taper: BT40, Spindle Speed:
100-10000 Rpm, Feed Rate: 1 –
5000mm/min, Rapid Travel: 16m/min
(X + Y), 12m/min (Z), ATC: 30 Stations,
Plus: Nikken 4th Axis Unit – 250Mm
Mori Seiki SL-25B CNC turning centre,
Fanuc MF-T6 CNC control, 12 tool turret,
tailstock, swarf conveyor
SANGIACOMO T-50-CE
OPEN-FRONT PRESS
Make: Sangiacomo,
Model: T-50-Ce,
Year: 1997, Tonnage: 50 Tons,
Strokes Per Minute: 145 Spm,
Adjustable Stroke: 11-90mm,
Plus: Hydraulic Tool Clamping
DEFuM WFB 80A-1500
HORIZONTAL BORER
CHEVALIER FSG818-AD
HORIZONTAL SPINDLE GRINDER
SANDRETTO EuROMAP 790/200
INJECTION MOuLDING MACHINE
Model: Wfb 80a-1500, Year: 1978,
Spindle Diameter: 80mm, Facing
Chuck Diameter: 500mm, Table: 1100 X
1000mm, Travels (X, Y, Z): 1500 X 1200
X 1500mm, Tailstock: 1100mm, Spindle
Speed: 1400 Rpm, Plus: 3-Axis Mitutoyo
Digital Readout, Outriggers 2 Spindle
Support Flanges, Some Tooling
Make: Chevalier,
Model: Fsg818-Ad,
Chuck Size: 400mm X 200mm,
Table Size: 710mm X 210mm,
Plus: Electromagnetic
Chuck Newall Digipac-5 Digital
Readout Coolant Filtration
System
Make: Sandretto,
Model: Euromap 790/200,
Year: 1997, Capacity: 200 Tons,
Platen Size: 770mm X 770mm,
Distance Between Tiebars:
510mm X 510mm,
Stroke: 210mm – 630mm,
Shot Weight: 545 Gm/S
NILES DFS 2-3 AXIS
CNC LATHE
SHIGIYA GN30B CNC
CYLINDRICAL GRINDER
ELB-SCHLIFF SWBE 06VA
MK. II SuRFACE GRINDER
Make: Niles, Model: Dfs 2-3 Axis
CNC Lathe, Control: Fanuc 0t,
Chuck Size: 300mm, Swing: 650mm,
Between Centres: 1500mm, Turret: 12
Station C Axis, Tailstock: Included,
Plus: Hydraulic Steady Swarf Conveyor
Quantity Of Driven Tooling
Manuals
Make: Shigiya (Japan),
Model: Gn30b, Control:
Fanuc Oog-C, Capacity:
300mm X 600mm, Plus:
Angle Approach With Swivelling
Head Marposs Gauging
System Drop-Down Internal
Grinder Manuals very Clean
Make: Elb-Schliff,
Model: Swbe-06va Mk.Ii,
Chuck Size: 500mm X 600mm,
Table Size: 500mm X 1000mm,
Plus: Auto-Downfeed
Electromagnetic Chuck
Hydraulic Machine
MORI SEIKI MV-80 VERTICAL
MACHINING CENTRE
OKK MCH-600 CNC HORIZONTAL
MACHINING MACHINE
HEYLIGENSTAEDT LARGE
CAPACITY CNC LATHE
Control: Fanuc Om
Plus –
400mm Nikken 4th Axis Unit
Make: Okk:, Model : Mch-600, Year:
1998:, Control: Fanuc 16m, Number Of
Pallets: 2, Pallet Size: 630 X 630mm,
Traverses (Xyz): 1020mm X 850mm X
880mm, B Axis: Full, Continuous, Spindle
Taper: Bt 50, Speed Range: 30-6000
Rpm, Atc: 60 Stations, Plus: ThroughSpindle Coolant
Control: Fanuc 21t
Chuck: 900mm
(13 th – 15 th April 2015)?
 02476 602622 sales@odinengineering.co.uk
www.odinengineering.co.uk
Fully Inclusive with every machine
• 5 years Warranty (Electrical and Mechanical)
• 5 years Servicing • Free Delivery and Installation to UK
• Operator Training • £500 of free Kyocera Tooling
ST 180 x750
Full CNC
prices from £22,500
Promotional
offer until
31st March 2015
SC200 x 1000 Manual lathe
With Fr
e
Turret Me M0S
ill
Machin ing
e!
Rhino 5 metre
bed with 310mm
spindle bore
ONLY UK manufacturer of Broaching Machines with over 25 years’ experience
within the machine tool market.
Please contact our sales team for any enquiries sales@odinengineering.co.uk
Metal Cutting
MACHINING CENTRES / MILLING
Vertical milling machine
Tel: +31 76 5075750 • Fax: +31 76 5035169
info@jansenmachinehandel.nl
www.jansenmachinehandel.nl
Rambaudi RAM-Mill
Table : 510 x 1.600 mm
X/Y/Z : 1.150 / 450 / 550 mm
Intake : ISO50
Stock nr. : frees440
Shear
Naxos Union RTY 63/ 2000 CNC-S
LVD MVC-16
Grinding wheel diam.: 800 mm
Grinding wheel width : 100 mm
Between centers : 2.700 mm
Stock nr.: slijp233
Capacity : 4.000 x 16 mm
With electric backstop
With cutting angle adjustment
Stock nr. : sch270
r
obe
oct
28
(0)121 ols.co
+ 44 hineto ols.co
Tel: samac hineto
www.b samac
www.b
ground
12:00
Page
1
om
e.c
Tel: +46 (0)40 180230 Email: guax@guax.se Web: www.guax.se
INE
RY
Grinder:
Surface
mm
Rotary
1.200
11.499HRTC 1200 x
Mill:
ALPA Ø 1.200/1.400
Boring
Cap.:
mm
240
125/240V
Horizontal
N WFSpindle Ø
x 3.000
SCHARMAN
8.000
11.494B
X/Y:
Cap.:
Mill:
Boring
Horizontal
115 x 2.000 mm
ADS
DEFUM2.000 x 2.000
11.017A
lin
with SINUMERIK 840D.
The machine has 2 milling units.
It is suitable for milling cam profiles
and the space between lobes on
camshafts. Max Diam 450 mm;
Max length 1.250 mm. New in 1999.
CH
Netherlands
ACHINERY.COM
– The
(Gld)
INFO@VRAETSM
RD Nijkerk42 43 RY.COM
2 - 3861 (0)33 246
+31
TSMACHINE
45 Fax
Gezellenstraat
245 21
WWW.VRAE
+31 (0)33
Machine:
Bed Milling
CNC 3300
mm
HVM x 1.050
x 1.200
ANAYAK
2.700
11.510L
Corrugation
Hydr.
mm
MATTISON
x 4.650
Grinder:
Ø 600
11.158D
Mill:
Boring
Vertical200
mm
1.500
KCF
RAFAMET
Ø 2.000/2.400
Surface
X/Y/Z:
x
Cap.:
11.132I
1250
Hor. Machining
5-Axis MAZAK H
mm
11.433MMBB
(10 Pallets):x 1.550
Centre1.524 x 1.524
Machine:
X/Y/Z:
Bed Milling
CNC
mm
x 1.900
CS 1000
11.525DMD
x 1.250
Column
MECOF
7.300
SingleVertical
Cap:
CNC Mill:
Boring
Cap.:
11.509L
Deep
Boring
28
Hole
BTBH
mm
11.321E2 BEYER
x 6.000
Machine:
Ø 320
Cap.:
IN TIONAL: AND
AL
ISING
AND
CONVEN CYLINDRICAL
SPECIAL
AND LATHES, HORIZONT
MACHINES
CNC
OVER
WWW
B.V. accepts
Harry
App
Vraets
HANKOOK
140
VTB
Ø
x
Cap.:
1.400/1.600
900 mm
NERY
STOCK
ES IN
ACHI
ETSM
800 MACHIN
.VRA
MILLS,
DUTY
MILLING
BORING
HEAVY
, BED
VERTICAL
GRINDERS
ROLL
no liability
for the
content
may
etc..
.COM
be subject
to interim
(price)
changes,
printing
and/or
typing
of accuracy,
Now
the
completeness,
on
re
p Sto
available
Ap
for
MACHINING
iOS
I app
the
CENTRES
2003
H500
VICToR VCENTRE
2 pallets.
0.001 B axis unit. pallet.
500mm x 500mm
feedrates.
24m/min rapid
motor.
15kW spindle
speed.
6,000 rpm spindle
£49,950
1997
PoRTAL
BRIDGEPoRT
VMC 1500
control.
Heidenhain TNC426PB
feedrates.
28 m/minute rapid
motor.
13.5kW spindle
Traverses XYZ:
13.5kW spindle.
500mm.
1500 x 800 x
£PoA
CNC LATHES
e MT
ad
nlo
Dow
fre
42 TWIN TURRET
CoNqUEST
cutting diameter.
HARDINGE
18T control. 228mmmotor.
£17,950
42mm bar. Fanuc
length. 7.5kW spindle
353mm cutting
bar. 250mm chuck.
300L 76mm
2000 DAEWoo 399mm cutting diameter.
£37,950
Fanuc 18 control.
spindle motor.
length. 22kw
635mm cutting
TEACH LATHE
TAURUS 310
2007 PINACHo 10m/min rapid feedrates.
180mm quill stroke. 11kw spindle motor.
bore.
£22,500
105mm spindle
Fanuc control.
TAURUS 260
LYNX 220B
bar.
2007 DooSAN
barfeed. 52mm
Full length hydrafeed 0iT control.
Fanuc
210mm chuck.
VTL-1600 ATC
rise and fall.
2003 YoU JI
800mm cross-slide control. £PoA
18i
1600mm chuck.
feedrate. FANUC
2000m/minute
TMC 18
spindle.
1997 NAkAMURA
control. 4500rpm
52mm bar. FanucTool setter, coolant, tailstock,
catcher. £18,950
25 x25 tool size.
collet chuck, parts
collets, barfeed,
20
HoWA ACT
3 jaw chuck,
1997 okUMA
Interlocked guards,
£PoA
Fanuc 18T control. manuals.
chuck,
collets, collet
2008 PINACHIo
3 jaw chuck.
SL40 M
bar capacity.
2001 HAAS
control. 102mm
£PoA
15” chuck. HAAS 1016mm swing.
2400rpm spindle.
355
2004 XYZ VL
Prototrak VL control.spindle bore.
200mm chuck.
centres. 52mm
£14,950
1000mm between
360mm swing.
bar.
35B/35G 80mm feedrates.
2x ECoCA SJ
15m/min rapid
£PoA
120mm quill stroke. 800mm spindle.
motor.
20hp spindle
VMC600 DIGITAL
40
2001 BRIDGEPoRTcontrol. 11kw Spindle Motor.
change.
Heidenhain TNC410 ISO 40. 22 position tool
£20,950
- 8000 rpm Spindle. x 410 x 520mm.
600
Traverses XYZ:
2001
DAEWoo
ACE V400
ISO 40.
8,000 rpm
spindle.
32 m / min
rapid feedrates.
30 position
tool change.
Traverses XYZ:
560 x 400 x
570mm.£27,500
2004 CINCINNATI
CFV 550I
4TH AXIS
VMC500 with 4 axis,
volt light,
1997 BRIDGEPoRT
rotary table, low
Coolant, 4th axis
£17,500
4th axis interface.
£PoA
16II
1994 STAR RNC
VMC560/16
BRIDGEPoRT
HIT 20M
2002 HYUNDAI MC- 510V
1990 MATSUURA
36 FRNC
1997 HAAS VF-1
BENNET CNC
1997 WEBSTER
HARRISoN M540TooLRooM MILL
2003 HAAS TM1
2001 HAAS VF0E
2000 HAAS VF-0E
1998 HAAS VF-0E
£11,950
£12,500
£24,950
£8,500
£16,950
£PoA
£PoA
£9,950
£19,950
£PoA
£14,500
VMC 560/22
motor.
1996 BRIDGEPoRTcontrol. 7.5kW spindle 560 x
Heidenhain TNC370 speed. Traverses XYZ:
spindle
£12,500
40 - 10000rpm
Interlocked guards.
410 x 489mm.
th
with 4 axis
EAGLE SMV1000 motor.
1998 YANG
spindle
control. 11kW
table.
FANUC OMC
1200 x 450mm
BT40 tool. £17,950
8000rpm spindle.
change capacity.
20 station tool
A2100 control.
MV1100 Acramaticmm. 30 positions tool
2000 YANG
970 x 510 x 510
maximum
Traverses XYZ: BT40 Taper. 127 - 637 mm
£17,500
change capacity.
from table to spindle.
& minimum distance
ALSo
AVAILABLE
CoMBI 2000
between
1998 CoLCHESTER54mm bar. 1156mm
control.
nose.
FANUC 210iT
motor. D1-6 spindle £15,000
PUMA 400B
7.5kW spindle
2001 DooSAN chuck. Fanuc control.
1105mm. centres.
116mm bar. 400mm Traverses XYZ: 362 x
£PoA
motor.
26kW spindle
TEACH LATHE
2005
XYZ
VM 3500
3 controlled
axis. Traverses
XYZ: 787 x 508
x 584. 127mm
quill stroke. 5hp
spindle motor
power. 5000rpm
spindle speed.
Prototrak VM
control.
£11,500
£PoA
HIT 28S
1997 HYUNDAI chuck. Siemens 840D control.
cutting length.
70mm bar. 250mm
diameter. 434mm
speed. £19,950
254mm cutting
4000rpm spindle
15kw spindle motor.
SY/1250
SEIkI NL2500
2007 MoRI
degrees C axis.
machining diameter.
65mm bar. 0.001
SEIkI SL 25Y spindle motor.
£PoA
control. 275mm
1995 MoRI
Mori MX850 III length. 12 turret positions.
diameter. 15kW
Y axis
turning
340mm cutting 520mm swing. +_ 50mm
£32,500 1250mm
3500rpm spindle.
15 control.
chuck. Fanuc
travel. 250mm
x
rpm spindle. 770
MMC45 8,000
2004 TRYAX
position tool change
BT40 taper. 10
300 mm table.
XYZ travers. 5.5kW
x 300 x 250mm
control. £17,500
capacity. 450
PC based - Centroid
spindle motor.
VMC800/22
spindle motor.
1996 BRIDGEPoRT
control. 7.5kW
Heidenhain TNC370 840 x 360mm table.
£17,500
spindle.
40 - 7000rpm
tool size.
change. BT40
16 station tool
Machine
Auto Pallet Changer Twin
2003 YCM FV56A Size: 2 x 700 x 420mm.
Table
MACHINES.
TH AXIS
BT40 spindle.
CHOICE OF TWO
VF5 with 4
£PoA
7500rpm spindle
1998 HAAS
Pallet Auto Changer.
spindle motor.
20HP vector drive
BT40 taper.
584mm table.
£32,500
speed. 1321 x
MISCELLANEoUS
VH 1800
1995 ANAYAk size, Heidenhain TNC 415
table
65mm bar.
29NC
Swivelling Universal
1800 x 810mm
PUMA 240MB
JUNkERS BUAJ
Speed 2000 rpm, x 800mm. £PoA
centres.
1999 ERWIN
2008 DooSAN
& milling, swarf jaw
control, Spindle
800mm between
1600 x 800
3
C axis. C axis
Traverses XYZ:
low volt light,
Cylindrical Grinder.
0.001degrees
grinding wheel.
£PoA Head.
setter, tailstock,
400mm x 63mm 5.5kw spindle motor.
conveyor, tool barfeed, collet chuck, manuals,
30mm quill stroke.
chuck, magazine barfeed interface, swarf conveyor.
£51,500
C axis, magazine
£21,000
WANTED
URGENTLY
BRIDGEPORT
VMCs, JAPANESE
VMCs, HURCO
Mk60 II H
2000 qUASER Fanuc 18M control
taper.
BT40 spindle
rpm spindle.
motor. 10,000
15kw spindle
capacity.
60 position change
th Axis
VF4 with 4
1999 HAAS
feedrates.
25.4m/minute
taper. FANUC
spindle speed.
HAAS control.
1020A 40 spindle
£PoA
motor. 7500 rpm
2009 DAH LIH manual guide. XY 20m/min
22.4kW spindle
with
tool change capacity.
25 tool change.
18iMB control
ARRoW 500
£PoA 20 station
1250 X 660 table.
1313
2001 CINCINNATIcontrol. 7.5kW spindle motor. x
rapid feedrates.
1020/550/560.
865
Accramatic A2100 CAT40 spindle taper.
Traverses XYZ:
£14,500
spindle.
40-6000 rpm
change capacity.
table. 21 tool
ENQUIRIES
£PoA 510mm
– ALL TRADE
HEAD CNCS
VMCs, SLIDING
WELCOME
M A G A Z I N E
Email:
Telephone: +44 (0)1622 859404
www.mtionline.com
PUTRA WORLD TRADE CENTRE
KUALA LUMPUR – MALAYSIA
20 TH - 23 RD MAY 2015
THE 21st ASEAN INTERNATIONAL
MANUFACTURING SOLUTIONS EVENT
Fanuc E
Robodrill,
2006,
Fanuc 31iA,
trav 500 x
400 x 330mm,
rapids 54m/
min, 21atc,
BT30,
10,000rpm.
£POA
Haas VF1, 1997, gearbox, trav 508 x 406 x
508mm, bt40, 20atc, 7500rpm. £POA
Bridgeport VMC 600/22, 1997,
Heidenhain TNC370, trav 600 x 410 x 520mm,
6000rpm, 22atc, bt40, 5.5/7.5kw. £14,950
Mazak Nexus 100 - 2, 2007,
Mazatrol Matrix Nexus, 152mm chuck,
52mm bar cap, toolsetter, tailstock, swarf
conveyor, Hydrafeed MX1B bar feeder. £POA
Doosan Puma 2600LY, 2012, Fanuc i Series,
C & Y Axis, hydraulic steady rest, barfeed
interface, 4 driven holders, 250mm chuck,
12 stn turret, tailstock, swarf conveyor max turn
dia 376mm, length 1280mm. £95,000
(13 th – 15 th April 2015)?
errors.
The information
applicability
availability,
in terms
and information
Machinery
Android
on
Edward House • Marchants Way • Sheddingdean Industrial Estate • Burgess Hill • West Sussex RH15 8QY
Tel: +44 (0)1444 245414 • Fax: +44 (0)1444 247518
Email: nigel@stevenmooneymachinery.co.uk www.stevenmooneymachinery.co.uk
26
23/06/2010
Background:Back
MA
Mazak Variaxis 500 – 5X II, 2010,
Single Pallet, 15 Bar TSC, 12000rpm, cat40,
40atc, Swarf Conveyor. £POA
2
March
2015
Vraets
Phone
HitacHi Seiki Vk65 VMC
Fanuc 15M. 20 ATC. Table Size 1600 x
670 mm. Table Loading 1500 KG. X-Axis =
1250, Y-Axis = 670, Z-Axis = 670 mm. Swarf
Conveyor. Ex-MOD. Stock No: 77592.
1724
We’ll place
your advert
in 82
countries.
Harry
CNC Camshaft
milliNg maChiNe
helleR RfN
10-2-1.250
Email: jet@jetmachinery.eu
Tel: +44 (0)1384 633968
13
20
llence
Exce
ering & al
CNC
ention
Conv ines 4071 .uk
Mach 783
m
Deliv
1589
on
ti.m
w
w
w
50vat
9,7rks +
£2ex wo
www.mtionline.com
We have a large stock of
12.000 m2 used machines
Cylindrical grinding machine
Metal Cutting/
Metal Forming
MILLING / SAWING • PRESS BRAKES
r
obe
oct
28
13
20
llence
Exce
ering & al
CNC
ention
Conv ines 4071 .uk
Mach 783
m
Deliv
(0)121 ols.co
+ 44 hineto ols.co
Tel: samac hineto
www.b samac
www.b
A 4,000
production
run every
week.
ground
Harry
Vraets
23/06/2010
12:00
Page
1
Background:Back
om
e.c
lin
on
ti.m
w
w
w
CH
INE
RY
Netherlands
ACHINERY.COM
– The
(Gld)
INFO@VRAETSM
RD Nijkerk42 43 RY.COM
2 - 3861 (0)33 246
+31
TSMACHINE
45 Fax
Gezellenstraat
245 21
WWW.VRAE
MA
Phone
+31 (0)33
Grinder:
Surface
mm
Rotary
1.200
11.499HRTC 1200 x
Mill:
ALPA Ø 1.200/1.400
Boring
Cap.:
mm
240
125/240V
Horizontal
N WFSpindle Ø
x 3.000
SCHARMAN
8.000
11.494B
Machine:
Bed Milling
CNC 3300
mm
HVM x 1.050
x 1.200
ANAYAK
2.700
X/Y:
11.510L
Cap.:
Corrugation
Hydr.
mm
11.132I MATTISON
x 4.650
Grinder:
Ø 600
Mill:
Boring
Horizontal
115 x 2.000 mm
ADS
DEFUM2.000 x 2.000
11.017A
Mill:
Boring
Vertical200
mm
KCF x 1.500
RAFAMET
Ø 2.000/2.400
X/Y/Z:
11.158D
Surface
Cap.:
1250
Hor. Machining
5-Axis MAZAK H
mm
11.433MMBB
(10 Pallets):x 1.550
Centre1.524 x 1.524
Machine:
X/Y/Z:
Bed Milling
CNC
mm
x 1.900
CS 1000
11.525DMD
x 1.250
Column
MECOF
7.300
SingleVertical
Cap:
CNC Mill:
Boring
Cap.:
11.509L
Deep
Boring
28
Hole
BTBH
mm
11.321E2 BEYER
x 6.000
Machine:
Ø 320
Cap.:
IN TIONAL: AND
AL
ISING
AND
CONVEN CYLINDRICAL
SPECIAL
AND LATHES, HORIZONT
MACHINES
CNC
OVER
WWW
B.V. accepts
Harry
App
Vraets
HANKOOK
140
VTB
Ø
x
Cap.:
1.400/1.600
900 mm
NERY
STOCK
ES IN
ACHI
ETSM
800 MACHIN
.VRA
MILLS,
DUTY
MILLING
BORING
HEAVY
, BED
VERTICAL
GRINDERS
ROLL
no liability
for the
content
may
etc..
.COM
be subject
to interim
(price)
changes,
printing
and/or
typing
errors.
The information
applicability
availability,
in terms
of accuracy,
completeness,
and information
Machinery
on
Android
on
Now
the
re
p Sto
available
Ap
for
MACHINING
iOS
I app
the
2003
H500
VICToR VCENTRE
2 pallets.
0.001 B axis unit. pallet.
500mm x 500mm
feedrates.
24m/min rapid
motor.
15kW spindle
speed.
6,000 rpm spindle
£49,950
1997
PoRTAL
BRIDGEPoRT
VMC 1500
control.
Heidenhain TNC426PB
feedrates.
28 m/minute rapid
motor.
13.5kW spindle
Traverses XYZ:
13.5kW spindle.
500mm.
1500 x 800 x
£PoA
CNC LATHES
e MT
ad
nlo
Dow
CENTRES
fre
42 TWIN TURRET
CoNqUEST
cutting diameter.
HARDINGE
18T control. 228mmmotor.
£17,950
42mm bar. Fanuc
length. 7.5kW spindle
353mm cutting
bar. 250mm chuck.
300L 76mm
2000 DAEWoo 399mm cutting diameter.
£37,950
Fanuc 18 control.
spindle motor.
length. 22kw
635mm cutting
TEACH LATHE
TAURUS 310
2007 PINACHo 10m/min rapid feedrates.
180mm quill stroke. 11kw spindle motor.
bore.
£22,500
105mm spindle
Fanuc control.
TAURUS 260
LYNX 220B
bar.
2007 DooSAN
barfeed. 52mm
Full length hydrafeed 0iT control.
Fanuc
210mm chuck.
VTL-1600 ATC
rise and fall.
2003 YoU JI
800mm cross-slide control. £PoA
18i
1600mm chuck.
feedrate. FANUC
2000m/minute
TMC 18
spindle.
1997 NAkAMURA
control. 4500rpm
52mm bar. FanucTool setter, coolant, tailstock,
catcher. £18,950
25 x25 tool size.
collet chuck, parts
collets, barfeed,
20
HoWA ACT
3 jaw chuck,
1997 okUMA
Interlocked guards,
£PoA
Fanuc 18T control. manuals.
chuck,
collets, collet
2008 PINACHIo
3 jaw chuck.
SL40 M
bar capacity.
2001 HAAS
control. 102mm
£PoA
15” chuck. HAAS 1016mm swing.
2400rpm spindle.
355
2004 XYZ VL
Prototrak VL control.spindle bore.
200mm chuck.
centres. 52mm
£14,950
1000mm between
360mm swing.
bar.
35B/35G 80mm feedrates.
2x ECoCA SJ
15m/min rapid
£PoA
120mm quill stroke. 800mm spindle.
motor.
20hp spindle
VMC600 DIGITAL
40
2001 BRIDGEPoRTcontrol. 11kw Spindle Motor.
change.
Heidenhain TNC410 ISO 40. 22 position tool
£20,950
- 8000 rpm Spindle. x 410 x 520mm.
600
Traverses XYZ:
2001
DAEWoo
ACE V400
ISO 40.
8,000 rpm
spindle.
32 m / min
rapid feedrates.
30 position
tool change.
Traverses XYZ:
560 x 400 x
570mm.£27,500
2004 CINCINNATI
CFV 550I
4TH AXIS
VMC500 with 4 axis,
volt light,
1997 BRIDGEPoRT
rotary table, low
Coolant, 4th axis
£17,500
4th axis interface.
£PoA
16II
1994 STAR RNC
VMC560/16
BRIDGEPoRT
HIT 20M
2002 HYUNDAI MC- 510V
1990 MATSUURA
36 FRNC
1997 HAAS VF-1
BENNET CNC
1997 WEBSTER
HARRISoN M540TooLRooM MILL
2003 HAAS TM1
2001 HAAS VF0E
2000 HAAS VF-0E
1998 HAAS VF-0E
£11,950
£12,500
£24,950
£8,500
£16,950
£PoA
£PoA
£9,950
£19,950
£PoA
£14,500
VMC 560/22
motor.
1996 BRIDGEPoRTcontrol. 7.5kW spindle 560 x
Heidenhain TNC370 speed. Traverses XYZ:
spindle
£12,500
40 - 10000rpm
Interlocked guards.
410 x 489mm.
th
with 4 axis
EAGLE SMV1000 motor.
1998 YANG
spindle
control. 11kW
table.
FANUC OMC
1200 x 450mm
BT40 tool. £17,950
8000rpm spindle.
change capacity.
20 station tool
A2100 control.
MV1100 Acramaticmm. 30 positions tool
2000 YANG
970 x 510 x 510
maximum
Traverses XYZ: BT40 Taper. 127 - 637 mm
£17,500
change capacity.
from table to spindle.
& minimum distance
ALSo
AVAILABLE
CoMBI 2000
between
1998 CoLCHESTER54mm bar. 1156mm
control.
nose.
FANUC 210iT
motor. D1-6 spindle £15,000
PUMA 400B
7.5kW spindle
2001 DooSAN chuck. Fanuc control.
1105mm. centres.
116mm bar. 400mm Traverses XYZ: 362 x
£PoA
motor.
26kW spindle
TEACH LATHE
2005
XYZ
VM 3500
3 controlled
axis. Traverses
XYZ: 787 x 508
x 584. 127mm
quill stroke. 5hp
spindle motor
power. 5000rpm
spindle speed.
Prototrak VM
control.
£11,500
£PoA
HIT 28S
1997 HYUNDAI chuck. Siemens 840D control.
cutting length.
70mm bar. 250mm
diameter. 434mm
speed. £19,950
254mm cutting
4000rpm spindle
15kw spindle motor.
SY/1250
SEIkI NL2500
2007 MoRI
degrees C axis.
machining diameter.
65mm bar. 0.001
SEIkI SL 25Y spindle motor.
£PoA
control. 275mm
1995 MoRI
Mori MX850 III length. 12 turret positions.
diameter. 15kW
Y axis
turning
340mm cutting 520mm swing. +_ 50mm
£32,500 1250mm
3500rpm spindle.
15 control.
chuck. Fanuc
travel. 250mm
x
rpm spindle. 770
MMC45 8,000
2004 TRYAX
position tool change
BT40 taper. 10
300 mm table.
XYZ travers. 5.5kW
x 300 x 250mm
control. £17,500
capacity. 450
PC based - Centroid
spindle motor.
VMC800/22
spindle motor.
1996 BRIDGEPoRT
control. 7.5kW
Heidenhain TNC370 840 x 360mm table.
£17,500
spindle.
40 - 7000rpm
tool size.
change. BT40
16 station tool
Machine
Auto Pallet Changer Twin
2003 YCM FV56A Size: 2 x 700 x 420mm.
Table
MACHINES.
TH AXIS
BT40 spindle.
CHOICE OF TWO
VF5 with 4
£PoA
7500rpm spindle
1998 HAAS
Pallet Auto Changer.
spindle motor.
20HP vector drive
BT40 taper.
584mm table.
£32,500
speed. 1321 x
MISCELLANEoUS
VH 1800
1995 ANAYAk size, Heidenhain TNC 415
table
65mm bar.
29NC
Swivelling Universal
1800 x 810mm
PUMA 240MB
JUNkERS BUAJ
Speed 2000 rpm, x 800mm. £PoA
centres.
1999 ERWIN
2008 DooSAN
& milling, swarf jaw
control, Spindle
800mm between
1600 x 800
3
C axis. C axis
Traverses XYZ:
low volt light,
Cylindrical Grinder.
0.001degrees
grinding wheel.
£PoA Head.
setter, tailstock,
400mm x 63mm 5.5kw spindle motor.
conveyor, tool barfeed, collet chuck, manuals,
30mm quill stroke.
chuck, magazine barfeed interface, swarf conveyor.
£51,500
C axis, magazine
£21,000
WANTED
URGENTLY
BRIDGEPORT
VMCs, JAPANESE
VMCs, HURCO
Mk60 II H
2000 qUASER Fanuc 18M control
taper.
BT40 spindle
rpm spindle.
motor. 10,000
15kw spindle
capacity.
60 position change
ARRoW 500
2001 CINCINNATIcontrol. 7.5kW spindle motor. x
865
Accramatic A2100 CAT40 spindle taper.
£14,500
spindle.
40-6000 rpm
change capacity.
th Axis
VF4 with 4
1999 HAAS
feedrates.
25.4m/minute
taper. FANUC
spindle speed.
HAAS control.
1020A 40 spindle
£PoA
motor. 7500 rpm
2009 DAH LIH manual guide. XY 20m/min
22.4kW spindle
with
tool change capacity.
25 tool change.
18iMB control
£PoA 20 station
1250 X 660 table.
1313
rapid feedrates.
1020/550/560.
Traverses XYZ:
table. 21 tool
ENQUIRIES
£PoA 510mm
– ALL TRADE
HEAD CNCS
VMCs, SLIDING
WELCOME
Email:
Telephone: +44 (0)1622 859404
www.mtionline.com
THE SAWING
SPECIALISTS
HBA S500
Klaeger Fully
Automatic
Bandsaws
Bridgeport
turret Mill
in excellent condition
Forestor
Bandmills
Woodworking
Bandsaws
www.sawsuk.com
2205
Phone: +44 (0)1388 776052
sales@bdmtools.co.uk
www.bluediamondmachinetools.co.uk
Alligator
Bandsaws
Comet
Circular
Saws
Sawing specialists for over 50 Years
EURO-SPEC
.
.A
O
P.
PRESSBRAKE TOOLING
Design and
Manufacture
of standard
and special
tools up to
6.1 metres
long
Fast
24-hour
re-machining
service for
tools and
shear
blades
Large stocks
available for
immediate
despatch
Tooling
to suit
all types of
machine
AMADA HFE 1003S/7 110 Ton x 122”
CNC Press Brake. Mfg: 2000. (Mach 10144)
Email: jordan@jordancraigmachinery.com
Tel: 845-398-0073
1737
.
.A
O
P.
www.mtionline.com
M A G A Z I N E
ASHMORES
2
March
2015
28
1040
THE UK’S LONGEST ESTABLISHED
PRESSBRAKE TOOLING
MANUFACTURER WITH OVER
90 YEARS EXPERIENCE
Email: ashmores@pressbraketool.co.uk
Website: www.pressbraketool.co.uk
Tel: +44 (0)121 557 1064
Fax: +44 (0)121 557 1085
(13 th – 15 th April 2015)?
AMADA HFE 1704S/7 187 ton x 167”
“Down-Acting” Hydraulic CnC Press Brake.
Operateur 7-Axis CnC Backgauge. Mfg: 2000
- Only 2800 Hours. (Mach 10135)
Tel: 845-398-0073
1737
• direct access to more than 10,000 machines in stock
available immediately
• open and brand-independent trading platform
• no introductory fees or commission
• no registration required for potential buyers
• no anonymous machine adverts – direct
contact with the seller
• register free machine request
• user-friendly operation with
industry-speciﬁc search functions
• professional service covering the required Machine
m
o
c
.
c
e
t
e
s
u
.
www
e Germany
USETEC 2015
Karlsruh
5
1
0
2
C
E
T
E
y - US
sruhe German
Karl
...we think ahead
Metal Forming
www.mtionline.com
Tel: +44 (0)1903 721 281
Email: sales@chiviott.co.uk
heaVY Plate rOlls
aVailaBle
*****FOr eXPOrt OnlY*****
rOundO Ps 460 x 3000
SAFAN VS3106 3m x 6mm
hyd shear, PBG, BGA, Vari-Rake
SAFAN CNCB 3m x 110ton
3 axis pressbrake, guards, tooling
3 roll hydraulic plate roll,
prebend 3000 x 25mm,
rolling 3000 x 40mm,
top roll 460mm.
Serial No. 914862,
year 1991.
£ P.O.A
rOundO Ps 500 x 3000
SERTOM EMO 30-130S double pinch
rolls, 3m x 150mm rolling cap, 2012
3 roll hydraulic plate
roll with side support.
Prebend 3000 x 30mm,
rolling 3000 x 45mm.
Top roll 450mm,
side rolls 500mm. Serial
No. 802429,
year 1981.
£ P.O.A
HACO TS206 2m x 6mm
hyd shear, PBG, BGA, Vari-Rake
Barnshaws Plate Bending
LVD STRIPPIT 1500/H CNC
turret punch, 1500mm throat, 30tons
AMADA PEGA 345Q
CNC turret punch, 30tons, tooling
e-mail: lisa.deakin@barnshaws.com
Tel: +44(0)1902 886211 or +44(0)121 521 5219
DURMA
VHKM2006
hyd
vari-angle
notcher,
200 x 6mm
KINGSLAND KTSX3006 3m x 6mm
hyd shear PBG, BGA, Vari-Rake
NEW HYDRAULIC PRESSES
FROM 50 TONS – 3,000 TONS
AMADA D750 punching machine,
30tons, 750mm throat, tooling
SIMAT
3m x 10mm hyd shear, PBG, BGA
WARD FORSYTH VO50
hyd press, 50tons, guards
CMZ 9R power swager,
2mm cap, 610mm throat, wheels
CUSTOM BUILT KEEN PRICES
SHORT DELIVERY
WARRANTY AND COMMISSIONING
WANTED — GOOD QUALITY
USED MACHINERY!
A small selection of our used machinery stock,
please contact us for complete stock list.
2
March
2015
30
www.used-machinetools-uk.com
(13 th – 15 th April 2015)?
1137
Severn Machines Ltd.
Reconditioned Trumpf CNC Machines,
Technical Support and Service
+44(0)1885 485838
Specialists in Refurbished
Second Hand Trumpf CNC Machines
Severn Machines Limited, Unit 1, Bishop’s Frome Technology Park, Bishop’s Frome, Worcestershire, WR6 5AY
Telephone: ++44(0)1885 485838 E-Mail: info@severnmachines.co.uk
www.severnmachines.co.uk
Metal Forming
PRESS BRAKES / PRESSES / PROFILING / PUNCHING
.
.A
O
P.
.
.A
O
P.
STEVENS MACHINE TOOL COMPANY LTD.
HARE / Norton hydraulic presses
from 5 Ton to 100 Ton. Refurbished, various specs
HACO PPB 40180 Hydraulic Press Brake.
Capacity; 1800kN – working length; 4000mm.
With back gauge, gooseneck toptool.
www.c-metals.be
Email: info@c-metals.be
Tel: +32(0) 56 58 59 59
Tel: +32(0) 56 58 59 59
1213
.
.A
O
P.
.
.A
O
P.
AMADA GEMINI F0-3015NT
4000 WATT CNC Laser Cutter. Mfg: 2005
- Approx: 24,000 Hours - New 24K Turbo
Blower & New Vacuum Pump. (Mach 10127)
AMADA PEGA 367 33 ton Turret Punch
W/ Fanuc O4Pc cnc control. Mfg: 1992.
(Mach 10174)
AMADA VIPROS 367 QUEEN
33 ton Hydraulic Turret Punch. W/ Fanuc 18P
CnC Control. Mfg: 1999. (Mach 10082)
Tel: +32(0) 56 58 59 59
Tel: 845-398-0073
1737
Tel: 845-398-0073
1737
Tel: 845-398-0073
1737
1213
CUT it — PUNCH it — NOTCH it — BEND it — DRILL & MILL it : KINGSLAND does it
sales@kingsland.com
1
5
32
Tel: +44 (0)121 555 6392 • Fax: +44 (0)121 565 2438
e-mail: info@stevensmachinetools.co.uk • www.stevensmachinetools.co.uk
DURMA HAP 30200 Hydraulic press brake
Yom; 1999. Straight top tool + multi-V die.
www.c-metals.be
www.kingsland.com
2
surEWEld pf150 kVa pnEumatic spot WEldEr.
idEal WElding nuts With auto fEEd systEm
2
March
2015
1213
.
.A
O
P.
.
.A
O
P.
www.mtionline.com
LVD PPN 300/60 MNC8000 Hydraulic press
brake. Yom 1985. Capacity; 300ton.
Working length; 6000mm. Command control
MNC8000 Y-X.
www.c-metals.be
polysoudE
p4 orBital
WEldEr,
touch
scrEEn,
closEd
hEads
25mm 115mm
3
Esprit lightning hd 1500 cnc
With hypErthErm plasma
nElson
4000
draWn
arc
stud
WEldEr
for
shEar
studs
6
4
EsaB mEchtrac suBarc gantry
WEldEr for any BEams or column
7
EsaB a2
sEam
WElding
tractor
With EsaB
laE 800
poWEr
sourcE
on skids.
3 in stock
(13 th – 15 th April 2015)?
EuropEan WElding
positionErs 1000 – 5000kg nEW
8
BodE sar 20 ton sElf aligning
WElding rotators
WELDING • INSPECTION EQUIPMENT
ESAB ComBirEx CxD-P 4000
CNC PortAl GAS/PlASmA
ProfilE CuttEr
fully workiNG
PriCE oN APPliCAtioN
+44 (0)116 269 6941
www.western-tooling.co.uk
The Largest Used
Metrology
Dealer in the UK
+44(0)1179 773766
welding@westermans.com
westermans.com
International WANTED
ALL FORMS OF
Specialists in
GEAR MACHINERY, CENTRELESS
GRINDERS AND LARGE BORERS
Web: www.jandrinternational.co.uk
Email: info@jandrinternational.co.uk
30 years of trading experience ensures conﬁdentiality
www.yourcompany.com
1139
From advert
to website
salesdirector@yourcompany.com
to sale.
Tel:+44(0)24 7663 8280
sales@midland-metrology.co.uk
CASH!
AUCTIONS
Awaits job lots of
unused BEARINGS &
Bearing Housings
D I G I T A L
Email:
Telephone: +44 (0)1622 859404
www.mtionline.com
Contact Martin
Mob: +44(0) 7802 928128
Tel: +44(0) 114 2310310
Fax: +44(0) 1302 727791
Email: msowt@aol.com
1410
Maintenance stores wanted
Best price paid
www.thebearingwarehouse.co.uk
See our website: www.nobilla.co.uk
Email: john@nobilla.co.uk Tel: +44(0)1438 812409
Export orders welcome
Mann spricht deutsch
Hablamos español
On parle francais
1991
LATHES, LATHES, LATHES are what we do. COLCHESTER LATHES
are what we specialize in. SPARES & ACCESSORIES we have in stock – new & used.
The largest stock is here!
WANTED: REDUNDANT MACHINERY
We don'tsell manybutthisis a very goodone:
HarrisonM400 x 40" straightbedImperial&
3 & 4 jawchucks,faceplate,Quickchange
toolpost& holders,catchplate,bedstop,travel
steady,rotatingcentre,drillchuckspanners&
keys,lathein superbcondition......£4250
(13 th – 15 th April 2015)?
Bowers; Trimos;
Tesa; Mitutoyo;
Taylor Hobson;
Service,
Repair and
Training.
2455
Tel: +44 (0)1785 284655
New and Used
Measuring Equipment
Profile Projectors
CMM
Hardness Testers
Vision Systems
www.mtionline.com
Midland Metrology ltd
Metal Forming/
Assoc. Prod/Wanted
2
March
2015
33
Auctions
Online Auction Sale
Gear Cutting & Testing Machinery formerly used by
Renold Engineering
Bidding Ends: Tuesday 10th March 2015 at 3.00pm (UK Time)
www.mtionline.com
2
March
2015
34
Viewing by Appointment only
∙Holroyd Universal Worm Grinder, Swing over Bed: 24”,
Distance between Centres: 95”
∙Holroyd Auto Cycle Swivelling Head Worm Milling Machine, Max.
Swing: 12”, Distance between Centres: 38”, Spindle Speeds: 30—180rpm
∙Sunderland 5A Gear Planer with Micro Process Controls, Full CE
Guarding, Spur Gears: 12” diameter, 4” Face, 5D.P Module 5,
Spiral 60 degrees, 5/8” CP Normal Pitch
∙Goulder Mikron Type SF/P Gear Testing Machine, Distance between
Centres: 64”, Diameter: 14”, T-Slotted Rotating Gear Table—350mm
∙Holroyd Gap Type Gear Tester, Swing in Gap: 18”, Swing over Bed: 12”,
Distance between Centres: 62”
For Full Information please visit our Website:
www.cottandco.com
Please Contact Our Office for Further Information: Cottrill & Co, 401—407 Tyburn Road, Erdington, Birmingham, B24 8HJ
▪ Tel: + 44 (0) 121 328 2424 ▪ Fax: + 44 (0) 121 327 9550 ▪
▪ Email: info@cottandco.com ▪ Website: www.cottandco.com ▪
1308
Cottrill & Co is a Trade Name of Cottrill & Associates Ltd
Unit 4, Anglo African Ind Estate
Union Road, Oldbury
West Midlands B69 3EX
Phone: + 44 (0)121 544 9867
Email: auctions@newengland.co.uk
Web: www.newengland.co.uk
By Order Of Retained Client – Online Auction Of Plant &
Equipment No Longer Needed In Their Ongoing Business
IMI Components SALE 6: Machine Shop & Tooling
Sale Closes: From 14:00 12th March 2015 — Location: West Midlands
• Hitachi Seiki VS40
• Bridgeport VMC 600-22 Digital
• MHP CNC Lathes (Fanuc)
(Qty 7)
• Ajax AJ250HD Lathe
• Harrison M300 Lathe
• Addison HBS275
Horizontal Band Saw
• MecWash Duo 400 Parts
Cleaning System (2011)
• Nederman Swarf Briquetting
System
• Optimax Vision Optical
Measuring Systems
• Tooling
GO TO
www.newengland.co.uk
(13 th – 15 th April 2015)?
TO BId
1977
Online Auction Sale
Conventional and Fabrication
Equipment formerly used by
Precision Engineering Services & Others
Bidding Ends: Thursday 19th March 2015 at 3.00pm (UK Time)
Viewing by Appointment only with the Auctioneer
•Ajax Model 310 CNC Centre Lathe (2005)
•Lang Type 10B2 Centre Lathe
•Dean Smith & Grace Type 21x108 Centre Lathe
•Dean Smith & Grace Type 1709 x 80 Centre Lathe
•Colchester Triumph 2000 Gap Bed Centre Lathe
•Harrison M390 Gap Bed Centre Lathe
•Harrison TYPE VS-330-TR Tool Room Centre Lathe
•Harrison Type M300 Gap Bed Centre Lathe
•Uniprize TYPE UL 160 x 750 Straight Bed Centre Lathe
•Harrison M400 Gap Bed Centre Lathe
•Kitchen & Walker Model E50-1250 Radial Arm Drill
•Kitchen & Wade 4' Radial Arm Drill
•Arboga & Pollard Pedestal Drills
•Clarke Model CDP 9FB Pillar Drill
•Meddings DRILTRU Bench Drill
•Churchill RBY 25" Ri March Mk M2-87 Tool & Cutter Grinder
•Clarkson MK11 Tool & Cutter Grinder
•Eagle Manual Tool Room Surface Grinder
•Grindmaster Set Matic Flat Bed Grinding Machining Grinder
•Jones & Shipman Type PROMAT CNC Cylindrical Grinder
•Christen Type 2-32 Drill Grinding Machine
•Ajax AJT4 Turret Milling Machine
•KRV 2000 Turret Milling Machine
•XYZ 1500VS Turret Milling Machine
•Deckel FP3 Toolmakers Universal Milling & Boring Machine
•Parkson No. 1NA Universal Milling Machine
•Adcock & Shipley No.2 Universal Milling Machine
•Startrite Type V900H Toolroom Vertical Bandsaw
•Addison Horizontal Metal Cutting Bandsaw
•Bewo Model 270 MAN Single Mitre Pull Down Bandsaw
•Eisele VMS 11PV Auto Cut Off Saw
•Pedrazzoli Aluminium Chop Saw
•Startrite 20 RWF Vertical Bandsaw
•Gate-Velox 10" Power Hacksaw
•Promecam Type RG 2400-80 Hydraulic Upstroking Pressbrake
•Bradley & Turton Upstroke Hydraulic Press
•Drummond Type 30/18 Hydraulic Straightening Press
•Marlco Hydraulic Vertical Broach Press
•Walton Type UTG/40/16 & UTG/50/16 Treadle Guillotines
•Kingsland Initial Pinch Manual Sheet Metal Bending Rolls
•FIAC TKi 20/300 Encapsulated Rotary Screw Air Compressor
•Abac Model VT30 Rotary Screw Air Compressor
•Thermal Dynamics PAK Master 150XL Plasma Cutter
•Dust Extraction Unit Type
W185/ 11 kw
•Welding Manipulator
•Vixen Bench Top Shot Blast Cabinet
For Full Information please visit our Website:
www.cottandco.com
For Further Information please contact our Office:
Cottrill & Co, 401—407 Tyburn Road, Erdington, Birmingham, B24 8HJ
▪ Tel: + 44 (0) 121 328 2424 ▪ Fax: + 44 (0) 121 327 9550 ▪
▪ Email: info@cottandco.com ▪ Website: www.cottandco.com ▪
Cottrill & Co is a Trade Name of Cottrill & Associates Ltd
1308
IAG – International Auction Group, the biggest
specialized auctioneer in Spain, announces two
important public online auctions in the metalworking
sector with over 1600 lots.
From 12/03 to 14/03:
Sale of the assets of an important radiator
manufacturer: Steel radiator production line,
steel panel radiator production line, automatic
packaging line, cataphoresis automatic painting
installation, Mechanical Presses, Shears, Robots
and much more.
Link to Auction: http://bit.ly/15Iidc9
For more information please contact:
Leo Jarque (Project Manager): +34 671341384
Offices: +34 93 1121515 www.iagauction.com
Elements line
From 20/03 to 27/03:
F.D. COIPER 2000, S.L. and COMONOR, S.A.
Two important manufacturers of wind turbine
components, metal structures and heavy boiler
making manufacturers based in Ponferrada (León).
It is a unique opportunity to purchase high capacity
machine-tools for welding, assembling, blasting,
painting and sheet forming with immediate
availability.
One Week Sale – More than 1000 Lots.
For more information please contact:
Elia Ales (Project Manager): +34 638 959 226
Offices: +34 93 1121515
Bending rolls machine
(Lot nº 3 - ref. 16249)
SERTOM EMO-30/60
Submerged arc welding column
(Lot nº 144 - ref. 16266)
ESAB CAB 460
Compressor
(Lot nº 442 - ref. 16337)
KAESER DSD 241
Submerged arc welding column
(Lot nº 159 - ref. 16281)
LINCOLN / BODE DC 1000 /
TRC
Radiators/panels packaging line
Call us (+34 93 1121515) or visit our Webpage
(www.iagauction.com) to obtain more information.
PLEASE VISIT OUR NEW website
IAG International Auction Group
Tel: (+34)931121515 - Fax: (+34)931175899
C/Electronica 19, 5º A, Badalona (BARCELONA) - Spain
www.iagauction.com
1st Machinery Auctions are offering various Machines from Various UK Sites.
Please see each lot for details.
Online Auction Date: Thursday 5 th March 2015 3pm GMT Viewing Dates: Appointment only
Call us for more details: 02476 992205 or email info@1stmachineryauctions.com
Citcom Citizen M20 CNC Sliding Head Lathe
with LNS Barfeed and tooling package
HAAS VF-2
Vertical Machining Centre (1996)
• 48” V series fixed rail Webster & Bennett Vertical borer
• Takisawa TC-1 CNC Lathe
• Takisawa TS10 CNC Lathe with Fanuc 10TF
with Symbolic FAPT Turn Option
• Hitachi HT25D Twin Turret CNC Lathe
• 48” V series fixed rail Webster & Bennett Vertical borer
• Imasflex Rotary Transfer CNC Machine (1995)
• Ingersol SSR– ML55 Screw Compressor
• Talyrond 50 Roundness Tester
• Tighman Deburing Machine
• Asquith LDR Radial Drill 42 inch
• Asquith ODI 78 inch Radial Drill with Cube
• Asquith ODI Radial Drill 52 inch
• Archdale Radial Drill with Cube
• Water Scrubber Units, Manufactured by
Airflow Product Finishing Ltd
• Guyson Super 4 unit c/w: extractor and filtration unit
• Granite table 2.4m x 1.2m
• Jones & shipman 1076 Grinding machine
• Ingersoll Rand 3Phase Compressor
model EN3V30B 150 Ltr tank
• EMCO F1P/CNC Milling machine
• 2 x Large Worcester Extraction Units
• Mitutoyo boxed
4 Quality Late HAAS Super Speed CNC Milling Machines available from 1st Machinery Auctions.
Please see each lot for details.
Online Auction Date: Thursday 19 th March 2015 – 3pm GMT.
Location: Midlands. Viewing Dates: Appointment only
HAAS VF-6SS 5 Axis VMC (2011) with 4th & 5th Axis
preparation with HAAS TRT 210 Tilting CNC Rotary Table
HAAS VF-5SS VMC (2011) Lots of Options,
Including Renishaw Probe System
5 Axis Gantry Composite
Milling Machine available.
ATECH Engineering has precision engineering
Plant sale due to retirement.
Online Auction Date: Thursday 12 th March 2015 –
3pm GMT. Location: Near Loughborough. Must
be removed by the End of March 2015.
Online Auction Date: Thursday 26 th March 2015.
Auction Ends Between 15:00-15:30 GMT. Location: Poole, Dorset.
Witec Wissner Epsilon 201 5 Axis Gantry CNC Machine
XYZ Proturn 425 fitted with
Protrak SLX control (2013)
XYZ Bed Mill SMX 3500 fitted with
Prototrak SMX control (2013)
• Doall Vertical Bandsaw
• Double ended grinder
• Fobco Pillar Drill
• Meddings Pillar Drill
• Qualters & Smith saw
• Inspection Equipment
• Tooling
Plus Lots More
A Midlands-based Engineering Company is disposing of a large amount of Manual Machinery and Plant.
Location: Brierley Hill, West Midlands Viewing Dates: Appointment only.
5 0 LO
TS
Online Auction Date: Thursday 12 th March 2015 3pm GMT
OPEN DAY:
Call us for more details: 02476 992205 or email info@1stmachineryauctions.com TUESDAY 10TH MARCH
Ward 10c
Lathe Prelector
Ward 8 Lathe with Collet
attachment and Bar Feed
CALL: 02476
992205
• Herbert 9C-30 Lathe
• Ward 7D Lathe
• Ward 10/13 Lathe
• Ward 7D Lathe with copy
turning attachment and DRO
• Ward 7C
• 3x Ward 7 Lathes
• Herbert 7 Lathe Pneumatic
chuck and Turret
• Herbert 7B Lathe
• Herbert 4 senior
• Herbert 5 Senior lathe with
hand wheel collet attachment
• Still Fork Lift
• Abac Air Compressor
• 7 x Cranes and Hoists
• 5 x Ward 10 Lathes
• 2 x Herbert 9C-30 Lathe
• 6 x Ward 7D Lathe
• Herbert 7 Lathe Pneumatic
chuck and Turret
• Herbert 7B Lathe
• Herbert 4 senior
• Herbert 5 Senior lathe,
with hand wheel collet
attachment
• Pallet Truck
• Cluches from Herbert 4/5/7
• Die Heads x 3
• Job Lot of Lathe Parts
• Abac Air Compressor
• 4 x Granite Surface Tables
• Grey Pallet Racking x 3
• 4 x Clarke Strongarm Power Hoist
• Black & Yellow Pallet Racking x 2
• Abwood 8” Machine Vice
• Racking (various)
• Reamers
• Selection of Office Chairs
am5852_MTI 19/02/2015 15:11 Page 1
For Sale by Negotiation
Instructed by Outokumpu Stainless AB
following closure of the Kloster, Långshyttan
Thin Precision Strip Plant, Sweden
A Range of Clean Modern Mills
and Processing Equipment
to Produce Stainless and Silicon Steel Precision Strip
for the Automotive, Telecoms and Medical Sectors
(Min Thickness 0.05mm x Max Width 1100mm)
n
n
n
n
n
n
n
n
n
n
n
2006 Mitsubishi Hitachi 12Hi Cluster Mill
1998 Mitsubishi 12Hi Cluster Mill
2 x Innocenti ZR22 32 Sendzimir Mills
RWF Skin Pass Mill
2006 ChugaiRo Vertical Bright Annealing Line
2nd Vertical Bright Annealing Line
Fully Equipped Annealing and Pickling Line
7 x Various Slitting Lines – some with NLT Robot Tooling
Rewind and Inspection Lines
Core Cutting and Packing
2 x Herkules WS180 CNC Roll Grinders
For Sale Individually or In Lots
Early Inspection Recommended
Joint Selling Agents
Charles Moses F.R.I.C.S
Dr Phil Thomas
+44(0)7831 854971
+44(0)7738 804761
charles.moses@cjmasset.com
phil.thomas@parkegate.co.uk
Location:
Outokumpu Stainless AB, Kloster Plant,
PO Box 100, 77070 Långshyttan, Sweden.
Viewing:
Strictly by Appointment
Nearest International Airports,
Stockholm Arlanda (approx. 210KM)
and Västeras (approx. 120KM)
Services
DEEP HOLE DRILLING — SPINDLE REBUILD • LIVE LINKS
Deep Hole Drilling
#&#+ ()*.'
(%*"#%% #)&#'!"&
% - &#% #' (++,$(&
www.mtionline.com
1652
Sawing
Levelling Feet
& Castors
Looking for
All Goods In Stock

Next Working Day Delivery

Full On-Line Ordering

Bespoke Levelling Feet

honing
excellence?
T: 01242 525868
sales@apperleyhoning.co.uk
www.apperleyhoning.co.uk
+44(0)1327 312664
www.stainless-feet.co.uk
Rebuilding & Retrofitting — CNC/Manual
PROSAW
the sawing experts
with the
lARgeSt
range!
Ring +44(0)1536 410999
for information and prices
www.prosaw.co.uk
sales@prosaw.co.uk
Live Links
SDH CONTROLS AND SERVICES LTD
Approved Engineer for Heidenhain, Fagor and Anilam Systems
MACHINE TOOL RETROFITS
( Midlands Based )
CONTACT
Simon Hopkins of SDH Controls and Services Ltd
www.asquithbutler.com
Asquith Butler Machine Tool Technology
• Spares • Service • Refurbishment & Retrofitting
Info@asquithbutler.com
www.edm.co.uk
Phone: 07802 213377 Email: info@sdhcontrols.com
www.sdhcontrols.com
2215
Suppliers of Fully Refurbished Wire & Die Sink EDM Machines
sales@edm.co.uk
Sawing
THE SAWING
SPECIALISTS
HBA S500
Klaeger Fully
Automatic
Bandsaws
Alligator
Bandsaws
2208
www.internationalpowerpresses.com
World Leaders in Mechanical and Hydraulic Presses and Associated Equipment
sales@internationalpowerpresses.com
Comet
Circular
Saws
Forestor
Bandmills
Woodworking
Bandsaws
www.sawsuk.com
1040
Service, Spares & Repairs
Spindle Rebuild
SERVICE & REPAIRS
42
Machine Feet
Honing
International
WANTED
ALL FORMS OF
• All types of Servo Motor repairs
• Spindle motors and associated drives
• Stock of Cincinnati & Bridgeport spares
• Specialists in obsolete motors and drives
• Up to 50% cheaper than machine supplier
• Fast turnaround 24-48 hours
New motors & drives also available
FANUC – INDRAMAT – KOLLMORGEN – SIEMENS
2
March
2015
2324
GEAR MACHINERY, CENTRELESS GRINDERS AND LARGE BORERS
info@jandrinternational.co.uk • www.jandrinternational.co.uk
www.kingsland.com
CUT it — PUNCH it — NOTCH it — BEND it —
DRILL & MILL it : KINGSLAND does it
European Drives & Motor Repairs Ltd
T. +44(0)1604 499777
sales@kingsland.com
www.edmr.co.uk
(13 th – 15 th April 2015)?
Inter-Plast Andrzej Bodziachowski company was established in 1995 and is one of
the biggest companies in Poland selling used CNC metal working machines. We own
properties in the form of 1.5 ha of area partially built over with modern halls of 6000 m2.
There are over 100 machines in stock.
We would like to invite you to co-operate with us.
Andrzej Bodziachowski
CNC Vertical
Machining Centre
CNC Bending Center
HITACHI
SEIKI VS 50
CNC SEICOS 18 M
Year of production:
2000
Working travel
X/Y/Z:
1000/510/450 mm
Spindle speeds:
120- 12 000 rpm
WEINBRENNER
B 12/3060/225/2
89 000 EUR
65 000 EUR
CNC Bed Type
Milling Machine
CNC Portal
Milling Machine
CNC HEIDENHAIN
TNC 426
Year of production:
1996
Table: 8000 x 800 mm
Working travel X/Y/Z:
6500/1600/1200 mm
CNC MISUBISHI
MELDAS
Year of production:
1998
Table:
3100 x 1500 mm
Working travel X/Y/Z:
3000/1500/700 mm
SORALUCE
SORAMILL
SP 8000
HARTFORD
HB 3150
CNC Lathe
CNC Lathe
DOOSAN
PUMA 240 MB
OKUMA
LFS 15-2 SP
30 000 EUR
21 500 EUR
CNC FANUC 21i-TB
Year of production:
2005
Turning diameter over
bed: 530 mm
Max.turning diameter:
300 mm
Distance between
centres: 513 mm
CNC OKUMA
OSP700L
Year of production:
1998
Turning diameter
over bed: 720 mm
Max. turning
diameter: 150 mm
CNC Punch Laser Cutting
Machine
CNC Laser
Cutting Machine
TRUMPF
TRUMATIC
L 2503 E
45 000 EUR
32 000 EUR
CNC SIEMENS 880
Year of production:
1997
Working area:
Max: 1500 x 3060 mm
Min: 200x 400 mm
CNC BOSCH CC 220
Year of production: USA
Table area:
2500 x 1250 mm
Laser power: 1 500 W
TRUMPF
TRUMATIC
300
15 000 EUR
10 000 EUR
CNC BOSCH
Cutting surface:
2250 x 1580 mm
Max. sheet
thickness: 10 mm
Machine as it is
Our full offer available on: www.inter-plast.com.pl
Phone: 0048 34 362 79 09 Mobile: 0048 663 958 005 Email: zuzanna@inter-plast.com.pl

02 March 2015 - MTI Magazine

Transcription

Similar documents

CNC MACHINING CENTER FOR TRIMMING MOLD CUTTING

Company Brochure - Sigler Machine Company

Granger Machine Facilities List

One (1) Preowned Nardini 1760E Gap Bed Engine Lathe

our Tri-fold Brochure click here. - 3D

CONCEPT TURN 260 Industry 4.0 in CNC training

Summit sCs series cnc Lathes

CNC Milling Machines CNC Vertical Lathe CNC Horizontal Lathe

STYLE control system

Paul Schurman Machine, Inc.