FJS/FJHS 1300 Data Sheet

Titan FJS/FJHS
1300
Titan Monitor Nozzle
z
Adjustable from straight jet to
fog pattern
z
Self inducing foam venturi
z
Nominal flow 1,300 l/min
@ 7 bar
The Angus FJS 1300 bronze fog/jet
nozzle is a simple and reliable design
fitted with a rotating sleeve which allows
the water or foam stream to be adjusted
manually from straight jet to wide fog
pattern.
The outer sleeve is fitted with brass
handles to allow easy adjustment when
wearing gloves or operating under
difficult conditions.
THROW (m)
30.0
A foam
inlet on the side of the nozzle is
25.0
NARROW
FOG which can be set
controlled
by a valve
20.0
for 1%,
3%, 6% induction or closed (no
15.0
induction).
10.0
Water inlet connection
2½” BSP M, (NH thread optional)
3½” BSP F, (NH thread optional)
150 x 150 square flange with “O” ring seal
Weights
2½” – 9.5 kg
3½” – 10.5 kg
150 x 150 flange – 11.0 kg
Foam pick-up tube
25mm (1”) nominal diameter wire reinforced flexible PVC with chamfered dip
tube - length 2m
Hydraulic remote control
The FJHS 1300 is fitted with a hydraulic
cylinder for remote operation (with
manual overide)
K factor
490 (Flow l/min = K x √Pressure bar)
Hydraulic connections
¼” BSP F
Design pressure
Maximum working pressure 16 bar
Factory test pressure 24 bar
5.0 materials
Nozzle
0.0 body to EN CC491K, equivalent
Bronze
2
3
4
5
6
7
8
9 10
to LG2, Red Brass,
ASTM
B62 and UNI
PRESSURE
(bar)
7013-8
CopperZinc Lead
FOG JET
FULL JET
Tin
85%5%5% 5%
60.0
40.0
THROW (m)
Seals
30.0
Viton
seals rated up to 120°C
20.0
10.0
194
31/2" BSP F.
50.0
Handles:
brass STREAM
STRAIGHT
2
3
4
5
6
7
PRESSURE (bar)
8
9
10
135
0.0
FLOW RATE (l/min)
1600
1400
1200
1000
800
3
4
5
6
7
PRESSURE (bar)
8
9
10
198
225
25.0
THROW (m)
Titan FJS/FJHS 1300
15.0
10.0
5.0
0.0
Titan Monitor Nozzle
50.0
NARROW FOG
20.0
3
4
5
6
7
PRESSURE (bar)
8
9
10
15.0
10.0
5.0
2
3
140
4
5
6
7
PRESSURE (bar)
8
9
8
9
10
STRAIGHT STREAM
40.0
THROW (m)
THROW (m)
25.0
30.0
20.0
10.0
0.0
10
2
3
4
5
6
7
PRESSURE (bar)
120
Length and height of nozzle jet
Maximum water throw 42m* at an angle
to the horizontal of 32°60.0
80
60
* Based on water at nozzle 50.0
inlet pressure of 7.0 bar
and flow 1,300 l/min.
STRAIGHT STREAM
20
3
40.0
Note: The jet throw depends on a number of variables
such as wind direction, type 30.0
and concentration of
foam in the water and the condition of the monitor
5
620.0
7
8
water 4
ways and nozzle.
THROW (m)
40
Spread of Fog Spray

5 bar
30° fog jet
2.5m 60° fog jet
3.5m 9
1600
9 bar
2.3m
3.0m
1000
3
4
0.0
CROSS REFERENCE IN % BETWEEN JET HEIGHT AND LENGTH
2
3
4
5
6
7
PRESSURE (bar)
Reaction Force kg
50
25
0
32
45
60
0
FLOW RATE (l/min)
1600
75
25
1400
50
LENGTH OF JET IN %
140
100%
1200
9
Solvent cleaning
Primer coat Epoxy 30μm
Intermediate coat Epoxy grey 40μm
Finish coat Polyurethane 40μm
Red RAL3000
5
6
7
PRESSURE (bar)
8
9
10
10
120
100
80
60
40
20
75
8
Surface preparation
Total dry film thickness 110μm
800
10
10.0 (bar)
Pressure
75%
Optional Paint Finish
71400
bar
2.5m 1200 3.0m
FLOW RATE (l/min)
100
HEIGHT OF JET IN %
Reaction Force kg
2
60.0
30.0
0.0
NARROW FOG
20.0
3
4
5
6
7
8
9
10
Pressure (bar)
For throw and height calculations at different angles
refer to the chart above or the
Angus Interactive
1000
Electronic Throw Program.
800
Monitors
Fog/Jet Nozzles
3
4
5
6
7
8
9
10
The Angus monitor range includes
Angus fog/jet nozzles cover the range
PRESSURE (bar)
bronze models up to 8,500 l/min and
200 to 20,000 l/min with self inducing
stainless steel models up to 50,000 l/min.
options up to 4,000 l/min.
Cannons
Angus foam cannons cover the range
800 to 15,000 l/min with a self inducing
option and foam spreaders on all models.
Most models are available with lever or
gearbox control, automatic oscillation or
with hydraulic or electric remote control.
All are suitable for use where explosive
atmospheres may be present.
Angus is a company assessed to
ISO 9001:2008.
Monitors
RHEMB 50
GMS 30
REMS 200
Specialist nozzles for dry powder are also
available – refer to Angus.
Fog/Jet Nozzles
Cannons
RHEMB 85
LMB 30
REMS 80
Most models are available with hydraulic
or electric remote control options
suitable for use in explosive rated areas.
GMS 45
LMB 40
REMS 300
GMS 60
GMS 200
LMB 85
GMS 80
GMS 300
INTERNATIONAL SALES
Angus Fire Ltd
Angus House, Haddenham Business Park,
Pegasus Way, Haddenham, Aylesbury, HP17 8LB, UK
Tel: +44 (0)1844 293600 • Fax: +44 (0)1844 293664
UK SALES
Angus Fire Ltd
Station Road, Bentham, Lancaster, LA2 7NA, UK
Tel: +44 (0)1524 264000 • Fax: +44 (0)1524 264180
Email: general.enquiries@angusuk.co.uk • Web: www.angusfire.co.uk
Angus Fire operates a continuous programme of
product development. The right is therefore reserved
to modify any specification without prior notice and
Angus Fire should be contacted to ensure that the
current issues of all technical data sheets are used.
© Angus Fire
6454/3 02.14