Improve - 3MCollision.com

3M Paint Application Systems
3M™ Accuspray™ System HVLP Spray Gun
PPS™ Paint Preparation System
Improve
Efficiency
Reduce Waste
The 3M™ Accuspray™ System and 3M™ PPS™ Paint Preparation
System offer the best solutions for mixing and spraying coating
materials for a variety of applications and uses. These systems
will revolutionize the way operators mix and spray coatings while
offering better spray precision, less overspray, and less cleanup!
If you are looking to reduce consumption of hazardous materials
and boost productivity in your facility, the combination of these
systems offer the best option to you.
3M™ Accuspray™ System/ HVLP Spray Gun
How The
System
Works
1
Hand tighten or use two wrenches
to connect the air flow
control value.
7
When you are finished using the
system remove the air line and
3M™ PPS™ Cup.
The 3M™ Accuspray™ System features the HVLP spray gun and disposable/
replaceable nozzles - virtually allowing you to have a brand new spray gun
on - demand. The innovative technology was designed for the efficient and
economical application of material without sacrificing quality. The
replaceable atomizing head minimizes clean up time while reducing coating
consumption.
2
Attach an atomizing head to the
gun - pull trigger back and hold,
making sure the release buttons
are aligned with latch openings
- listen for a double click to
ensure that it is fully engaged.
8
Flush out atomizing head with
appropriate solvent until the
atomizing head is clear of coating.
3
Attach 3M™ PPS™ cup filled with
coating and attach compressed
air hose.
9
Remove atomizing head - be
sure to pull trigger back and pull
the atomizing head straight out
from the gun body to avoid
bending the fluid needle.
Technical Data
Weight
11.4 oz
Nozzle Size
1.8 mm
Operating Pressure (Full Trigger)
20 psi max
Operating Pressure (First Stage)
30 psi max
Air Consumption
10 cfm
4
Set air pressure at 30 psi for 1st
stage (only air flowing).
10
Wipe off any additional residue
from the fluid needle.
5
Set air pressure at 20 psi for 2nd
stage (air and fluid flowing).
11
Inspect atomizing head for damage
or wear which could result in fluid
leaks or poor performance.
6
Adjust fan and fluid flow to achieve
the desired size and wetness of the
pattern. NOTE: when closing the fan
adjustment completely it may be
necessary to re-adjust the air
flow control valve.
12
Re-attach the same atomizing
head or when necessary replace
with a new one.
3M™ PPS™ Paint Preparation System
Directions
For
1
The 3M™ PPS™ Paint Preparation System is a unique, closed system which enables
operators to mix less material, reduce gun cleaning time and minimize the amount of
solvent use. By eliminating the need for traditional mixing cups and strainers, coatings
can now be mixed and sprayed out of the same PPS™ Liner. Specifically designed
adapters allow operators to use the PPS™ system with virtually any spray gun. The liner,
lid and built-in filter are all disposable, leaving only the adapter and spray gun to clean.
Used with the new Accuspray System HVLP Gun, it virtually eliminates the cleanup
required. A key advantage of this closed system is that it enables a spray gun to
function at any angle, even upside down!
Use 2
3
4
Remove existing cup from spray gun.
Thread correct adapter to spray gun.
Remove liner from wall dispenser and
place into 3M™ PPS™ mixing cup.
Weigh the paint according to paint
manufacturer’s guidelines.
If not using a scale to measure, insert
3M™ PPS™ Mix Ratio Film into
cup before inserting liner in order to
measure the paint according to paint
manufacturer’s guidelines.
5
6
7
8
Mix product as needed.
Take a lid (with built-in filter) from wall
dispenser and snap into the 3M™
PPS™ cup/liner.
Position locking collar onto the 3M™
PPS™ cup/liner and turn until tight.
Insert sealing plug prior to shaking.
3M™ PPS™ shaker core is used to
distribute clamping force when shaker
machines are used to mix material.
9a
9b
Spray gun with correct adapter is
attached with a quick quarter turn.
Make sure that the lid fingers are fully
engaged above adapter edge.
12
To return material back into gun cup
before disconnecting spray gun,
disconnect air line, invert gun (gravity
feed only) and pull trigger fully for a
few seconds.
16
13
Remaining material can be capped
and stored for later use.
Storage of paint should follow all
local regulations.
10
11
The spray gun is now ready to spray
as normal. NOTE: For spraying upsidedown, follow directions in the “Tips”
section on purging air.
Due to the fact 3M™ PPS™ is a closed
system, painters may now spray their
gun completely perpendicular to their
intended surface without fear of material
dripping on their job.
14
15
When you’re done using the system,
the lid and liner can easily be removed
from the cup.
Remove unused material from
the liner and place into proper
disposal container.
3M PPS
™
17
Paint Preparation
System
Consult paint or solvent Material Safety
Data Sheet (MSDS) in addition to local
regulations or authorities for safe use
and proper disposal.
A squeeze bottle (Part No. 37720)
containing solvent or water enables fast
gun cleaning once the 3M™ PPS™
cup is removed. More efficient painters
make facility more productive.
™
Great Value
Speed&
Performance
It’s Easy as Click and Spray
This revolutionary product allows you to have a brand new spray
gun on demand. The innovative technology was designed from
the inside out for the efficient and economical application
of material. These atomizing heads deliver a large usable
pattern, with very low overspray and exceptional atomization.
Reduces
Overspray
Improves Transfer
Efficiency
Lowers
Coating Consumption
Flatter
Smoother Finish
Decreases
Sanding Time
Reduces Solvent
Consumption
Reduces
Clean Up Time
Creates “Like New”
Gun Performance
Part No.
Description
Items/Billing Unit
Billing Units/Case
16570
3M™ Accuspray™ Spray Gun Model HG09 (1 HVLP Spray Gun, 3 Nozzles & Air Flow Control Valve)
1
1
16610
3M Accuspray Atomizing Head Dispenser and 2 Refill Kits (2 Kits = 8 Nozzles)
1
1
16611
3M Accuspray Atomizing Head Refill Kit (4 Nozzles)
4
6
16571
3M Accuspray Fluid Needle
1
1
16572
3M Accuspray HG09 Test Air Cap
1
1
16573
3M Accuspray Air Flow Control Valve
1
1
™
™
™
™
™
™
™
™
™
™
Contact your local 3M representative for gun model specific adaptors.
For more information, contact your 3M sales representative today for
procedure and application recommendations or check out our website
at www.3M.com/accuspraysystem
Key Benefits of using the 3M™
PPS™ Paint Preparation System
• Only one PPS™ cup for mixing and spraying
• Enables painters to mix less paint
• Up to 70% savings of cleaning solvent
• Closed system - no outside contamination
• Faster system - from mixing to disposal
• Less operator exposure to solvents and
reduction in VOCs
• Spray gun functions at any angle
• Available in 3 sizes: 180 mL, 650 mL., 850 mL.
Part No.
Description
Items/Box
Boxes/Case
Lids & Liners
16114
Mini Lids and Liners w/200 micron filters
50
1
16000
Standard Lids and Liners w/200 micron filters
50
1
16024
Large Lids and Liners w/200 micron filters
25
1
Cups & Collars
16115
Mini Cup/Collar
2
4
16001
Standard Cup/Collar
2
4
16023
Large Cup/Collar
1
4
16121
Type H/O Pressure Cup (mini)
1
4
16124
Type H/O Pressure Cup (large)
1
2
Accessories
16098
Mini Lid/Liner Dispenser
1
1
16019
Standard/Large Liner Dispenser
1
1
16099
Standard/Large Lid Dispenser
1
1
37720
Detailing Squeeze Bottle
24
1
For more information, contact your 3M sales representative today for
procedure and application recommendations or check out our website
at www.3M.com/pps
3M™ Dirt Trap Surface Protection System
Temporary Surface
Protection
Applications
Foreign Object/Debris During
Manufacturing or Repair
Paint Booth Protection
Equipment and Facilities
Ground Protection
Traffic and Floor Protection
Surface Finish Protection
For more information, contact your 3M sales representative today for
procedure and application recommendations or check out our website
at www.3M.com/dirttrap
Part No.
Item
Description
Boxes/Case
36851
3M™ Dirt Trap Protection Material
14” x 300 ft roll – wall and floor protection material
1 roll/case
36852
3M Dirt Trap Protection Material
28” x 300 ft roll – wall and floor protection material
1 roll/case
36853
3M Dirt Trap Protection Material
56” x 300 ft roll – wall and floor protection material
1 roll/case
36856
3M Dirt Trap Protection Film – Clear
18” x 100 ft roll – window and light protection film
1 roll/case
36862
3M Dirt Trap Protection 28” Material Dispenser
Magnetic metal dispenser for material
1 per case
36863
3M Dirt Trap Protection 14” Film Dispenser
Magnetic metal dispenser for film
1 per case
36861
3M™ Dirt Trap Protection System Intro Kit
1 roll of material, 1 roll of film, 2 dispensers,
2 installation tools and installation instructions
1 kit/case
36865
3M™ Dirt Trap Material 28” Floor Applicator
Versatile, floor applicator for 28” wide material
1 per case
36864
3M Dirt Trap Material 56” Floor Applicator
Versatile, floor applicator for 56” wide material
1 per case
08888
3M Glass Cleaner
19 oz can
™
™
™
™
™
™
™
Paint Application Systems
3M Center
Building 223-6N-01
St. Paul, MN 55144-1000
Please recycle. Printed in U.S.A.
3M is a trademark of 3M.
© 3M 2011. All rights reserved.
60-4402-7738-6
12 cans/case