J0YCe lIneaR ACtUatoRs

J 0 yc e L i n e a r A c t u at o r s
Joyce/Dayton Linear Actuators are the
newest addition to our extensive line
of lifting and positioning equipment.
Available in machine and ball screw
designs these heavy-duty actuators
can handle loads of up to 2000
pounds. Joyce actuators are offered
in two distinct versions-Motorized
and Integrated.
Joyce Motorized Actuator models
are available in 500 and 1500 pound
capacities and 115-volt AC or 12-volt
DC designs.
The 500 pound actuators are available
in 3”, 6”, 12”, and 18” travels and
speeds up to 42 inches per minute
(AC models) and 70 IPM (DC models).
The 1500 pound actuators come in
3”, 6”, 12”, 18” and 24” travels and
speeds up to 52 IPM (AC models)
and 36 IPM (DC models).
Joyce/Dayton motorized actuators are available in both 500 and 1500 pound capacities.
Joyce integrated actuators are available in capacities up to 2000 pounds.
Joyce Integrated Actuators are worm gear driven designs that incorporate an integrated NEMA 56C motor flange for easy motor
adaptation. Versatile Integrated Actuators are offered in both machine and ball screw models for maximum design flexibility.
Four Integrated Actuator models are available including two traveling nut (rotating screw) models and two translating stainless
steel tube models. Integrated Actuators are available in capacities up to 2000 pounds and Joyce will provide standard AC, DC,
or air motors at the customer’s request. Joyce Integrated Actuators come in your choice of 5:1 and 20:1 worm gear ratios for
speeds from 14 to 345 inches per minute. Standard Integrated Actuators are available in travel lengths up to 24” and come
equipped with an output shaft, which can be used to couple two actuators for synchronous operation. Joyce also offers optional
clevis and limit switch mounting options.
All Joyce Motorized and Integrated Actuators are designed for long service life and have been tested for thousands of cycles
to ensure trouble free operation. The lifting mechanisms consist of either a high tensile aluminum-bronze lifting nut or heattreated ball nut connected to a weather resistant lifting tube. For specific model information, please see the following pages.
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
147
J 0 yc e L i n e a r A c t u at o r s
500 POUND AC & DC Models
Specifications
• Double Clevis Mounting
• Standard Travels of 3", 6", 12", & 18"
• Double Lead Machine Screw
• Cast Aluminum Housing
• Stainless Steel Lifting Tube
• Spring Type Brake
• Temperature Range of -20° to + 104°F ambient
• Limit Switch Available
• AC Models are 115 Volt
• DC Models are 12 Volt
• Load Limiting Friction Slip Clutch Available
• Limit Switch w/10 Turn Potentiometer (AC Only)
• Lifting Tube Restraining Torque 60 in-lbs.
Options
• 90° Clevis Mount (Slip Clutch Models Only)
• AC Extend/Retract Actuator Controller
• DC Extend/Retract Actuator Controller
• Threaded Screw End (Slip Clutch Models Only)
115 VAC motor is an enclosed, permanent split
capacitor induction type. Load/no-load speeds
are approximately equal. The motor is equipped
with a thermal overload device that opens and
resets automatically. Standard motor requires
25 µF capacitor supplied by the customer or Joyce.
Note: Capacitor is supplied with the purchase of a Joyce
controls package.
12 VDC motor is totally enclosed, weather
resistant, permanent magnet type. Magnets
act as a secondary brake for added safety.
This type of motor is smaller, cooler running,
more efficient and has higher duty cycles than
series-wound motors. Lower current draw
provides for longer battery life. The Motor is
also equipped with a thermal overload device
that opens and resets automatically. The
rotation is reversible by reversing the two
color-coded leads, and torque is the same in
either direction.
Note: Some actuator surfaces may reach 230° F during operation at or near maximum duty cycle. All ratings are nominal and
based on the actuator being broken-in for approximately 2500 inches of travel.
Approximate weight LAO55L = 12 pounds + 0.3 pounds/inch
Approximate weight LAO55C = 11 pounds + 0.3 pounds/inch
For complete ordering information see page 169
148
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
J 0 yc e L i n e a r A c t u at o r s
500 POUND DC WITH LIMIT SWITCH
LA052L
Note: Drawings are artist’s conception — not for certification; dimensions are subject to change without notice.
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
149
J 0 yc e L i n e a r A c t u at o r s
500 POUND DC WITH SLIP CLUTCH
LA052C
Note: Drawings are artist’s conception — not for certification; dimensions are subject to change without notice.
150
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
J 0 yc e L i n e a r A c t u at o r s
500 POUND AC WITH LIMIT SWITCH
LA055L
LA055P
Note: Drawings are artist’s conception — not for certification; dimensions are subject to change without notice.
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
151
J 0 yc e L i n e a r A c t u at o r s
500 POUND AC WITH SLIP CLUTCH
LA055C
Note: Drawings are artist’s conception — not for certification; dimensions are subject to change without notice.
152
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
J 0 yc e L i n e a r A c t u at o r s
1500 POUND AC & DC MODELS
Specifications
• Double Clevis Mounting
• Standard Travels of 3", 6", 12", 18" & 24"
• Double Lead Machine Screw
• Cast Aluminum Housing
• Stainless Steel Lifting Tube
• Spring Type Brake
• Temperature Range of -20° to + 104°F ambient
• Limit Switch Available
• AC Models are 115 Volt
• DC Models are 12 Volt
• Load Limiting Slip Clutch Available (DC Only)
• Limit Switch w/10 Turn Potentiometer (AC Only)
• Lifting Tube Restraining Torque 190 in-lbs.
Options
• Trunnion Mount
• AC Extend/Retract Actuator Controller
• DC Extend/Retract Actuator Controller
• Threaded Screw End
115 VAC motor is an enclosed, permanent
split capacitor induction type. Speeds remain
approximately constant regardless of the load.
The motor is equipped with a thermal overload
device that opens and resets automatically.
The standard motor comes complete with
heavy-duty capacitor. (90µF)
12 VDC motor is totally enclosed, weather resistant, permanent magnet type. Magnets act as a secondary brake for added
safety. This type of motor is smaller, cooler running, more efficient and has higher duty cycles than series-wound motors.
Lower current draw provides for longer battery life. The Motor is also equipped with a thermal overload device that opens
and resets automatically. The rotation is reversible by reversing the two color-coded leads, and torque is the same in either
direction.
Note: Some actuator surfaces may reach 230° F during operation at or near maximum duty cycle. All ratings are nominal and based on the actuator being broken-in for approximately 2500 inches of travel.
Approximate weight LA155L = 25# + 0.5#/inch of rise
Approximate weight LA152C = 19# + 0.5#/inch of rise
For complete ordering information see page 169
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
153
J 0 yc e L i n e a r A c t u at o r s
1500 POUND DC WITH LIMIT SWITCH
LA152L
Note: Drawings are artist’s conception — not for certification;
dimensions are subject to change without notice.
154
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
J 0 yc e L i n e a r A c t u at o r s
1500 POUND DC WITH SLIP CLUTCH
LA152C
Note: Drawings are artist’s conception — not for certification;
dimensions are subject to change without notice.
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
155
J 0 yc e L i n e a r A c t u at o r s
1500 POUND AC WITH LIMIT SWITCH
LA155L
LA155P
Note: Drawings are artist’s conception — not for certification;
dimensions are subject to change without notice.
156
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
J 0 yc e L i n e a r A c t u at o r s
100-2000 POUND Integrated Models
Specifications
• Integrated NEMA 56C Motor Flange
• Standard Travels of 6", 12", 18" & 24"
• (8) Machine Screw Models
• (6) Ball Screw Models
• Traveling Nut and Translating Tube Versions
• Ball Screws in .250” & 1.000” Lead
• Worm Gear Drives in 5:1 & 20:1 Ratios
• Stainless Steel Lifting Tube
• Bolt Pattern for Standard Hydraulic Mounts
• Lift Speeds up to 345 Inches per Minute
• Limit Switch Available
• AC, DC and Air Motors Available
Options
• Clevis Accessories
• AC, DC, and Air Motors
• Limit Switches
• Custom Travel Lengths
Integrated Actuator Traveling Nut models are
used for lifting and positioning applications that
are relatively free of dust, dirt, and moisture.
Translating Tube models are well suited for
contaminated environments. Motors can be supplied by Joyce/Dayton or by the customer. Optional limit switches offer the
ability to set upper and lower travel limits. Actuator output shaft can be used to couple two actuators for synchronous operation.
Warning: These actuators are specifically designed for industrial applications and should not be used to lift support or
transport people unless specifically approved in writing by Joyce/Dayton Corp.
Approximate weight IA1TT/IA201TT = 10# + 0.5#/inch of rise
Approximate weight BIA51TT/BIA201TT = 13# + 0.5#/inch of rise
For complete ordering information see page 170
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
157
J 0 yc e L i n e a r A c t u at o r s
250-2000 POUND INTEGRATED
IA51TT / DIA51TT
IA201TT / DIA201TT
Lead - The distance a screw advances axially in a single turn.
Pitch - The distance from a point on a screw thread to a corresponding point on the next thread,
measured axially. It can also be expressed as the number of threads per inch.
158
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
J 0 yc e L i n e a r A c t u at o r s
250-2000 POUND INTEGRATED
IA51TN / DIA51TN
IA201TN / DIA201TN
Lead - The distance a screw advances axially in a single turn.
Pitch - The distance from a point on a screw thread to a corresponding point on the next thread,
measured axially. It can also be expressed as the number of threads per inch.
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
159
J 0 yc e L i n e a r A c t u at o r s
100-2000 POUND INTEGRATED
BIA51TT / HBIA51TT
BIA201TT
Lead - The distance a screw advances axially in a single turn.
160
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
J 0 yc e L i n e a r A c t u at o r s
100-2000 POUND INTEGRATED
BIA51TN
HBIA51TN
BIA201TN
Lead - The distance a screw advances axially in a single turn.
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
161
J 0 yc e L i n e a r A c t u at o r s
INTEGRATED ACTUATOR ACCESSORIES
Motors
Standard 56C-NEMA Frame motors are available in:
AC Motors
DC Motors
For availability and ordering information see page 170.
• 1/4, 1/3, 1/2, and 3/4 HP
• 1/4, 1/3, 1/2, and 3/4 HP
• 1140 or 1725 RPM
• 1750 RPM
• Singe or Three Phase
• 90 & 180 Volts
• With or Without Brake
Limit Switch (LS7 ONLY)
Limit Switch Position Nos.
Clevis Accessories
162
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
J 0 yc e L i n e a r A c t u at o r s
linear actuator control packages
Item No.
E08040376 115VAC - for 1500 lb. Actuators
E08040377 115VAC with 25µF Capacitor - for 500 lb. Actuators
E08040378 12 VDC - with Wired Relays - for all DC Actuators
Specifications
Nominal Dimensions. . . . . . . . . . . . . . . . . . . . . 6 x 6 x 4 inch
Enclosure. . . . . . . . . . . . . . . . . . . . . NEMA 12 CSA Approved
Extend/Retract Switch. . . . . . . . . . . . Illuminated Rocker typemomentary contact with
extend / retract indicator lights
Finish. . . . . . . . . . . . ANSI 61 Gray Polyester Powder Coating
Housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Gauge Steel
Hinge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Continuous
Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oil Resistant
Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External Feet
Note: All Packaged Controls include a terminal strip and are internally wired, ready for connection to the power source.
All connections must be made according to the instructions accompanying each control package.
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
163
O R D E R I N G I NFO R M AT I ON — J 0 yc e L I NEA R A c t uato r s
500 & 1500 POUND LINEAR ACTUATORS
Use the chart below to create part numbers for all 500lb and 1500lb linear actuators (pages 147 through 156)
Capacity
Voltage
Options
Base Mounting
SC=Standard Clevis
2=12 VDC
C=Clutch
RC=90° Rotated Clevis
L=Limit Switch
05=500lb
SC=Standard Clevis
SC=Standard Clevis
C=Clutch
RC=90° Rotated Clevis
5=115 VAC
Screw End
Travel
CL=Clevis
TE=Threaded
CL=Clevis
TE=Threaded
CL=Clevis
CL=Clevis
TE=Threaded
CL=Clevis
TE=Threaded
03, 06, 12, 18
L=Limit Switch
P=Limit Switch
w/Potentiometer
LA
SC=Standard Clevis
SC=Standard Clevis
C=Clutch
TM=Trunnion
2=12 VDC
SC=Standard Clevis
L=Limit Switch
TM=Trunnion
15=1500lb
SC=Standard Clevis
L=Limit Switch
TM=Trunnion
5=115 VAC
P=Limit Switch
w/Potentiometer
SC=Standard Clevis
TM=Trunnion
CL=Clevis
CL=Clevis
TE=Threaded
CL=Clevis
TE=Threaded
CL=Clevis
TE=Threaded
CL=Clevis
TE=Threaded
CL=Clevis
TE=Threaded
CL=Clevis
TE=Threaded
CL=Clevis
TE=Threaded
CL=Clevis
TE=Threaded
03, 06, 12, 18, 24
Example: LA152LSCCL-12 is a 1500lb actuator with a 12VDC motor, limit switch, standard double clevis mounting, and 12” of travel.
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
169
O R D E R I N G I NFO R M AT I ON — J 0 yc e L I NEA R A c t uato r s
100-2000 POUND INTEGRATED ACTUATORS
IA51 - TT - 12.00 - LJ20 - MMAA - KS
Model number
• Machine Screw - IA51, IA201, DIA51, DIA201
• Ball Screw - BIA51, BIA201, HBIA51
Design
• TT – Translating Tube
• TN – Traveling Nut
Rise in inches (max 24.00”)
Auxiliary drive shaft
•
•
•
•
•
•
XXXX – None (Remove Shaft)
STDX – Standard 0.5” shaft
LJ10 - Optional LS7-402 Limit Switch in Position 1
LJ20 – Optional LS7-402 Limit Switch in Position 2
LJ30 – Optional LS7-402 Limit Switch in Position 3
LJ40 – Optional LS7-402 Limit Switch in Position 4
C-Face Motor Mounting
•
•
•
•
•
MMAK – 1/4 HP Motor
MMAA – 1/3 HP Motor
MMAB – 1/2 HP Motor
MMAC – 3/4 HP Motor
MMAX – No Motor
Note: Unless specified in options below, all
motors listed here are 230/460v, 3 ph., 60 hz.
Options: Include as many codes as necessary
•
•
•
•
•
•
•
•
•
X=No additional options
M=Additional specification required (comment as necessary)
C12=12VDC Motor
C24=24VDC Motor
C90=90VDC Motor
C180=180VDC Motor
K=Brakemotor (see availability below)
R=1140 rpm
S=Single Phase Motor (115/230 3ph 60Hz )
Example: IA51TT-12.00-LJ20-MMAA-KS is a 5:1 Ratio translating tube Integrated Actuator with 12” travel, a LS7-402 limit switch in position 2, and
a 1/3 HP single phase brakemotor.
Additional accessories available from Joyce for the Integrated Actuator (as shown on page 162)
Part Number
08040368
08040369
08040370
Description
Eye Bracket
Clevis Bracket
Pin
Standard motors available from Joyce:
Voltage
115/230 VAC Single Phase
115/230 VAC Single Phase
115/230 VAC Single Phase w/brake
230/460 VAC Three Phase
230/460 VAC Three Phase
230/460 VAC Three Phase w/brake
12 VDC Permanent Magnet
24 VDC Permanent Magnet
90 VDC Permanent Magnet
180 VDC Permanent Magnet
Speed (rpm)
1/4 HP
1/3 HP
1140
1725
X
X
1725
X
1140
X
X
1725
X
X
1725
X
X
1800
X
X
1800
X
1750
X
X
1750
X
X
1/2 HP
X
X
X
X
X
X
X
X
X
X
NOTE: Other motors may be used on Joyce/Dayton Integrated Actuators. Please contact Joyce for assistance.
170
1-800-523-5204
Visit our website now for 2D and Interactive 3D models of all our Jacks and Actuators.
www.joycedayton.com
3/4 HP
X
X
X
X
X
X
X
X
X
X