dmf2mdl5ds front - Fluid Systems Incorporated

A WARREN RUPP PUMP BRAND
DRILLER’S
Quality System
ISO9001 Certified
MUD SERIES
2" Flap Valve
Models DMF2R
and DMF2S
Environmental
Management System
ISO14001 Certified
CE
II 2GD T5
2" (50mm) NPT(F)
Type 5
Air-Operated
Double Diaphragm Pump
0 to 140 gallons per minute
(0 to 530 liters per minute)
Up to 2" (50mm)
No-lube, no-stall
design.
125 psi or 289 ft. of water
(8.8Kg/cm2 or 88 meters)
(SANDPIPER® pumps are designed to be powered only by compressed air)
Model DMF2
Performance based on water
at ambient temperature.
Average displacement per
pump stroke: 1.60 liters.
TOTAL HEAD IN Kg/cm2
TOTAL HEAD IN PSI
Model DMF2
Performance based on water
at ambient temperature.
Average displacement per
pump stroke: .43 gallon.
CAPACITY IN US GALLONS PER MINUTE
DMF2
Type 5
DB-5-A
Manifold
Elbow
Outer
Chamber
Inner
Chamber
AL380DC
AL380DC
AL 380DC
CAPACITY IN LITERS PER MINUTE
Outer
Inner
Diaphragm Diaphragm Intermediate Diaphragm
Plate
Rod
Plate
Housing
PS
PS
AL = Aluminum
DC = Die Cast
B = Nitrile
PS = Plated Steel
356-T6AL
416SS
Valve
Seat
316SS
Flap
Seat
Hard- Diaphragm
Valve
ware
Material Gasket
PS
B
B
N/A
Sealing
Rings
Shipping
Wt.(lbs)
B
86
SS = Stainless Steel
SANDPIPER® is a tradenames of Warren Rupp, Inc. All rights reserved.
dmf2mdl5ds-REV0609
DMF2R
A WARREN RUPP PUMP BRAND
Operating Temperatures
Maximum*
Minimum*
Nitrile General purpose, oil-resistant. Shows good solvent, oil, water and hydraulic fluid
resistance. Should not be used with highly polar solvents like acetone and MEK, ozone,
chlorinated hydrocarbons and nitro hydrocarbons.
*Definite reduction in service life.
**Minimal reduction in service life at ends of range.
For specific applications, always consult The Warren Rupp Chemical Resistance Chart.
Model DMF2R
5.58
142
SUCTION PORT
2" CAM AND GROOVE
24.50
622
19.80
503
DISCHARGE PORT
2" CAM AND GROOVE
11.93
303
5.58
142
13.50
343
13.00
330
26.00
660
4.69
119
3/4" NPT AIR EXHAUST
27.00
686
3/4" NPT AIR INLET
*Equipped with 2" Cam and Groove Male Fittings
Copyright© 2009 Warren Rupp, Inc. All rights reserved.
Specifications are subject to improvement without notice.
®Warren Rupp and SANDPIPER® are tradenames of Warren Rupp, Inc.
WARREN RUPP®,
dmf2mdl5ds-REV0609
Telephone (419) 524-8388 s Fax (419) 522-7867 s www.warrenrupp.com
DMF2S
A WARREN RUPP PUMP BRAND
Model DMF2S
SUCTION PORT
2" CAM AND GROOVE
26.04
661
5.58
142
3/4" NPT AIR EXHAUST
23.85
606
DISCHARGE PORT
2" CAM AND GROOVE
15.98
406
3/4" NPT AIR INLET
8.73
222
5.58
142
32.00
813
18.50
470
Copyright© 2009 Warren Rupp, Inc. All rights reserved.
Specifications are subject to improvement without notice.
®Warren Rupp and SANDPIPER® are tradenames of Warren Rupp, Inc.
WARREN RUPP®,
dmf2mdl5ds-REV0609
Telephone (419) 524-8388 s Fax (419) 522-7867 s www.warrenrupp.com