Innovation! Quality! Value!

Innovation! Quality! Value!
Dumor U.V. Coater
Dumor’s high quality
U.V. coater
Protect your valuable digital print, reduce scratching, scuffing, cracking! Due to the digital print
process, most digital toner/wax/inks stay on the surface of the paper and don’t sink in like regular
ink, this means the print is very tender and liable to be damaged very easily. One way around
this is to laminate, but with the increasing price of film, that can become expensive on larger
quantities. UV coating provides a durable coating that will reduce any damage to the print
surface, and enhance the depth, color, contrast and gloss of the print at the same time!
There are UV-coaters out there but they usually cost in excess of 30000 euro! Why pay a fortune
to UV-coat? Dumor has the right priced alternative: A compact machine with a low cost that
does the job at a fraction of the price of traditional machines. The compact dumor UV-coater
will coat most types of digital and offset print and thicker substrates e.g. foam board using
suitable fluids. The power supply is a ordinary wall socket with 16 amp capacity, (3 phase not
required). Easy to set up, suitable for widths up to ca. 48 cm, adjustable roller gap to 6 mm,
process speed to ca. 6 m / min, hand feeding (feeder in development).
showroom: Houtschelf 24 | 3371 KB | Hardinxveld | Netherlands | Tel. 085-4890015 | sales@dumor.eu | www.dumor.eu
Innovation! Quality! Value!
Technical specifications
Model
Features
Dumor UV Coater will coat most types of digital and offset output using a
suitable fluid, adjustable roll gap, tank with pre-heating of fluid to ca. 35
degrees for better coverage, optional sheet pre-heater for opening up
the print to receive the fluid and fluid pre-heater, caster mounted. Specs:
Paper from ca. 140 gsm to ca. 600 gsm, to 480 wide x ca. 650 long, max
roll spacing 6mm, feedspeed to 5 m / min, outer dimensions 117 (l) x 77
(w) x 130 (h), 300 kg, 2500W single phase, tank ca. 8 liters.
Dumor UV Coater
UV coater with 1 UV lamp, 1200W
Process speed to ca. 6 m / minute
Process width to 48 cm
Outfeed tray to ca. 650 long
Hand feeding
Roller gap from fully closed to 6 mm for board
Tank capacity ca. 8 liters
Tank preheated to ca. 30 deg C for better fluid coverage
Infeed sheet pre-heater (in development)
Conveyor ca. 100 cm
Cooling fans in UV area
Fume extraction nozzle on housing
Power supply 220V ac 50 hz, 2000W single phase supply with ground.
Dimensions
117 (h) x 77 (w) x 130 (l) for 200 kg nett
Delivered on skid and crated
Non contractual document, specification subject to change without notice, errors and omissions
excepted, copyright dumor 2012.
Diagram UV Adjustment
Wave of Fluid
Bloc
Silicone
Applicator
Roller
Upper Roller adjustment in and
out via upper wheel
Tap
Nozzle
IR 1500W
UV 2000W
Hood
Chrome Roller
Paper Infeed
Paper Path
Lower Roller Adjustment up
and down via lower wheel
Beth Drive
Tray
Air Flow
Fan
Chrome Roller
Fluid
Scraper
Doctor Blade
Middle Wheel
Drip Catch Tray
Air Exhaust
Return Pipe
Tank
Pump
Tank Nectar
Dumor UV Coater
Leaflet V02.02
showroom: Houtschelf 24 | 3371 KB | Hardinxveld | Netherlands | Tel. 085-4890015 | sales@dumor.eu | www.dumor.eu