Electronics 123

Transcription

Electronics 123

Shop1 Moulton Centre, Cnr. of Codonia & Moulton Street, Waverley, Pretoria, South Africa
PO Box 31113 Waverley Pretoria 0135, Tel: (012) 332 2356, Fax: (012) 332 0487
E-mail: archimedes@electronics123.co.za, Internet: http://www.electronics123.co.za
Dear Electronics Enthusiast
1 April 2006
The products that are advertised in this new catalogue can be
purchased at our shop. You are invited to visit our shop
and see the products firsthand, however for your convenience
all the products may also be ordered from our website.
Electronics123 is a well-established company providing a
service to thousands of electronic hobbyists, students and
professionals throughout South Africa.
Manager:
Jaco Smit
Editor:
Cornelius
Mail Orders:
Hilda
Administration:
Vicky
Best regards,
Jaco Smit.
Store:
Lucas
Sales:
Ananias
Joshua
Norman
Welcome
Members: JJ Smit/ JH Smit/ J Smit
ELECTRONICS123
Archimedes Products cc t/a
TECHNOLOGY STATION IN ELECTRONICS
Electronic
Assembly Facility
Introduction
Going online:
www.electronics123.co.za
Our website makes online shopping
as easy as 123
Step 1: Use the Catalogue for product codes.
Step 2: Know immediately if we have stock.
Step 3: Get the exact price of the product.
Situated at the Tshwane University of Technology
(TUT), the Technology Station in Electronics
(TSE) aims to assist SMEs to become global
competitors through:
Automated Electronic Assembly
Rapid Prototyping
Prototype Rework
Contacts
Dr SJ Jacobs(Director)
Mr Kobus Vorster (Facility Co-ordinater)
Tel: (012) 318-5039
Fax: (012) 318-4166
E-mail: vorsterk1@tut.ac.za
tseinfo@tsem.co.za
9
INDEX
MICRO CONTROLLER PROGRAMMERS................... 02.58
REMOTE CONTROLLERS............................................02.60
BOOKS & MAGAZINES
MAGAZINES.................................................................. 01.1
HI-FI AND AUDIO.......................................................... 01.4
COMPUTERS................................................................ 01.4
MICROCONTROLLERS................................................ 01.4
DATA, THEORY AND REFERENCE............................. 01.5
GENERAL CIRCUITS AND PROJECTS.......................01.8
SERVICING MANUAL................................................... 01.9
KITS & MODULES
ROBOTICS AND MECHANICAL MOTION................... 02.1
BATTERY CHARGERS AND ACCESSORIES............. 02.5
RELAY UNITS AND SWITCHES................................... 02.63
FLUID LEVEL SENSORS..............................................02.66
TEMPERATURE SWITCHES........................................ 02.66
SOUND SWITCHES...................................................... 02.68
LIGHT SENSITIVE SWITCHES.....................................02.69
TOUCH SWITCHES.......................................................02.70
LIGHT DIMMERS...........................................................02.70
MOTOR SPEED CONTROLLERS................................ 02.71
RADIO TRANSMITTERS...............................................02.73
RADIO RECEIVERS...................................................... 02.74
TV AND VIDEO..............................................................02.76
POWER SUPPLIES....................................................... 02.6
SECURITY......................................................................02.77
ALARM SIMULATORS AND DETERRENTS
INVERTERS AND CONVERTERS................................ 02.9
ELECTRONIC KEY AND KEY-PAD SWITCHES.......... 02.77
CIRCUIT PROTECTION................................................ 02.10 ALARM CONTROL PANELS........................................ 02.78
SIGNAL GENERATORS................................................02.11 LIGHT BARRIERS.........................................................02.79
SOUND IMITATIONS..................................................... 02.12 TIMERS.......................................................................... 02.80
VARIOUS SOUNDS.......................................................02.13 TESTING INSTRUMENTS AND DEVICES................... 02.84
AUDIO AMPLIFIERS..................................................... 02.16 MISCELLANEOUS KITS............................................... 02.86
AUDIO SIGNAL MODIFIERS........................................ 02.27
LIGHT EFFECTS........................................................... 02.29
FLASHERS.................................................................... 02.31
RUNNING LIGHTS........................................................ 02.33
SOUND TO LIGHT MODULATORS.............................. 02.37
EXPERIMENTATION PROJECTS
EXPERIMENTATION PROJECTS................................. 02.86
NO SOLDERING REQUIRED PROJECTS................... 02.88
SOLDERING FOR STARTERS..................................... 02.89
CONSUMER PRODUCTS
AUDIO SIGNAL LEVEL INDICATORS......................... 02.39 CLOCKS........................................................................ 03.1
DISPLAYS......................................................................02.40 LIGHT PRODUCTS....................................................... 03.1
GAMES AND FUN STUFF.............................................02.45 AUDIO PRODUCTS.......................................................03.2
SPY STUFF.................................................................... 02.48 TOYS..............................................................................03.2
TELEPHONE ACCESSORIES...................................... 02.48 HOME AND GARDEN................................................... 03.3
INTERCOMS.................................................................. 02.49 CAR AND MOTORCYCLE............................................ 03.3
RECORDING DEVICES.................................................02.49
SECURITY
HEALTH, SAFETY AND ENVIRONMENT.....................02.50 VIDEO CAMERA MODULES........................................ 04.1
CAR ACCESSORIES.....................................................02.52 FAKE SECURITY CAMERAS....................................... 04.2
COMPUTER ACCESSORIES........................................02.54 HOME AND BUSINESS SECURITY SYSTEMS........... 04.2
CAR / MOTOR CYCLE SECURITY SYSTEMS............ 04.3
JUMPER WIRES............................................................05.18
SWITCHES AND LOCKS.............................................. 04.5
STRIPBOARD / VEROBOARD..................................... 05.19
SIRENS AND WARNING LIGHTS.................................04.5
PRINTED CIRCUIT BOARD (PCB)...............................05.19
SECURITY SENSORS...................................................04.7
PCB ACCESSORIES.....................................................05.20
REMOTE CONTROLS...................................................04.9
SOFTWARE
ELEKTOR CD-ROMS.................................................... 05.20
SECURITY COMMUNICATORS....................................04.11
TOOLS
EDUCATIONAL CD-ROMS........................................... 05.22
EAGLE PCB DESIGN SOFTWARE.............................. 05.23
TEST AND MEASUREMENT
POWER SUPPLIES AND INVERTERS
OSCILLOSCOPES........................................................ 05.1
RECTIFYING POWER SUPPLIES................................ 05.23
SIGNAL GENERATORS................................................05.3
PLUG IN UNREGULATED AC TO DC ADAPTORS.....05.24
MULTIMETERS..............................................................05.4
FIXED VOLTAGE........................................................... 05.24
REGULATED POWER SUPPLIES
PANEL MOUNT DISPLAYS...........................................05.6
TESTING DEVICES....................................................... 05.7
TOOLS
VARIABLE VOLTAGE................................................... 05.24
REGULATED POWER SUPPLIES
INVERTERS................................................................... 05.25
ANTI-STATIC PROTECTION.........................................05.8
VOLTAGE CONVERTERS.............................................05.26
IC HANDLING................................................................ 05.8
SOLAR PANELS AND ACCESSORIES........................05.27
ASSISTING TOOLS.......................................................05.8
TWEEZERS................................................................... 05.9
PLIERS AND CUTTERS................................................05.9
HARDWARE
MISCELLANEOUS
ADHESIVES...................................................................06.1
WIRE STRIPPERS.........................................................05.10
TAPE.............................................................................. 06.1
CRIMPING TOOLS........................................................ 05.10
ADHESIVE RUBBER FEET...........................................06.1
SCREWDRIVERS.......................................................... 05.11
GROMMETS.................................................................. 06.1
TOOL KITS.................................................................... 05.11
GEARS AND PULLEYS................................................ 06.1
PCB DRILLING TOOLS................................................ 05.12
NUTS AND BOLTS
DRILL BITS....................................................................05.13 STEEL............................................................................ 06.3
MILLING BITS............................................................... 05.13 DISTANCE BOLTS........................................................ 06.3
CUTTING DISCS........................................................... 05.13 SPACERS...................................................................... 06.3
GRINDING BITS............................................................ 05.14
ENCLOSURES
STANDARD PLASTIC ENCLOSURES......................... 06.3
SURFACE FINISHING BITS..........................................05.14
FLANGED PLASTIC ENCLOSURES........................... 06.4
SOLDERING IRONS......................................................05.15
PLASTIC UTILITY / STORAGE ENCLOSURES.......... 06.4
SOLDERING IRON REPLACEMENT TIPS.................. 05.16
SPECIAL PLASTIC ENCLOSURES............................. 06.4
SOLDERING STANDS.................................................. 05.17
SIMPLEX METAL ENCLOSURES................................ 06.5
TOOLS FOR DESOLDERING....................................... 05.17
AND SOLDER REMOVAL
SIMPLEX WITH VISOR METAL ENCLOSURES..........06.5
SOLDER WIRE.............................................................. 05.17 ALL PURPOSE + VISOR METAL ENCLOSURES....... 06.5
CIRCUIT PROTOTYPING
VENTILATED METAL ENCLOSURES.......................... 06.5
BREADBOARDS........................................................... 05.18
SPECIAL METAL ENCLOSURES.................................06.6
COMPONENTS
BATTERIES AND ACCESSORIES
LEAD ACID RECHARGEABLE BATTERIES............... 07.1
ADHESIVE MOUNTING BLOCKS................................ 07.13
SPIRAL CABLE WRAPPING........................................ 07.13
EMI FILTER CABLE CLAMPS...................................... 07.13
CONNECTORS AND SOCKETS
GENERAL PURPOSE BATTERIES.............................. 07.1
ALKALINE BATTERIES................................................ 07.2
LITHIUM BATTERIES....................................................07.3
NICKEL CADMIUM RECHARGEABLE BATTERIES... 07.3
NI-MH RECHARGEABLE BATTERIES........................ 07.3
BATTERY HOLDERS.................................................... 07.4
BATTERY CHARGERS AND ACCESSORIES............. 07.5
LIGHT PRODUCTS
XENON STROBE LAMPS............................................. 07.5
FLUORESCENT LAMPS...............................................07.6
ULTRAVIOLET BLACKLIGHTS................................... 07.7
NEON LAMPS / INDICATORS...................................... 07.7
SPOTLIGHTS AND COLOURED LAMPS.................... 07.7
FILAMENT LAMPS........................................................07.7
LAMPHOLDERS AND REFLECTORS......................... 07.8
LIGHT EFFECT / DISPLAY DEVICES.......................... 07.9
CABLES AND ACCESSORIES
IC SOCKETS................................................................. 07.14
AUDIO JACK CONNECTORS...................................... 07.14
RCA PHONO / XLR CONNECTORS............................ 07.15
ADAPTERS AUDIO JACK / XLR / RCA PHONO.........07.16
RJ10, RJ11, RJ12, RJ45 CONNECTORS.................... 07.17
BANANA CONNECTORS............................................. 07.18
DC / AC POWER CONNECTORS.................................07.18
MAINS POWER CONNECTORS...................................07.19
’D’ TYPE AND COMPUTER CONNECTORS............... 07.20
IDC HEADER PLUGS AND SOCKETS........................ 07.22
SINGLE ROW HEADER PLUGS AND SOCKETS....... 07.22
POWER CONNECTOR PLUG / SOCKET SETS..........07.23
SCREWLOCK MULTIPIN CONNECTORS................... 07.23
DIN SOCKETS AND PLUGS.........................................07.23
BNC / TNC / SMA CONNECTORS............................... 07.24
N / PL259 (UHF) TYPE CONNECTORS....................... 07.25
PANEL FLEX................................................................. 07.10 RADIO / TV / SATELLITE CO-AX CONNECTORS...... 07.26
RIPCORD / TWIN FLEX................................................ 07.10 TERMINAL / CONNECTOR TAGS AND....................... 07.27
PRESS CONNECTORS
LOUDSPEAKER CABLE.............................................. 07.10
POWER CABLE............................................................ 07.11
SIGNAL / BURGLAR ALARM CABLE......................... 07.11
CATEGORY 5E LAN DATA CABLE..............................07.11
RIBBON CABLE............................................................07.11
SCREENED AUDIO COAXIAL CABLE........................ 07.12
COAXIAL CABLE..........................................................07.12
FIBRE OPTIC CABLE................................................... 07.12
ENAMEL INSULATED COPPER WIRE........................ 07.12
TINNED COPPER WIRE............................................... 07.12
RESISTANCE WIRE...................................................... 07.12
HEAT SHRINK TUBING.................................................07.13
CABLE CLIPS............................................................... 07.13
CABLE TIES.................................................................. 07.13
LOUDSPEAKER CONNECTORS................................. 07.28
TERMINAL BLOCKS.....................................................07.29
CROCODILE CLIPS...................................................... 07.29
WIRE CLIPS.................................................................. 07.29
THERMAL MANAGEMENT
HEATSINKS................................................................... 07.30
HEATSINK ACCESSORIES.......................................... 07.30
COOLING BRUSHLESS FANS.....................................07.30
PELTIER MODULE........................................................07.31
CIRCUIT PROTECTION
FUSES........................................................................... 07.31
FUSE HOLDERS........................................................... 07.32
PTC RESETTABLE FUSES.......................................... 07.33
THERMAL CUTOFF FUSES......................................... 07.33
THERMAL CIRCUIT BREAKERS................................. 07.33
KEYPADS...................................................................... 07.67
GAS TUBE ARRESTORS............................................. 07.33
PUSH-BUTTON SWITCHES......................................... 07.67
METAL OXIDE VARISTORS (MOV)..............................07.33
MICRO SWITCHES....................................................... 07.68
TRANSIENT VOLTAGE SUPPRESSOR DIODES........ 07.34
PASSIVE COMPONENTS
ROCKER SWITCHES....................................................07.68
INDUCTORS.................................................................. 07.34 TOGGLE SWITCHES.................................................... 07.68
CAPACITORS................................................................ 07.35 SLIDE SWITCHES.........................................................07.70
RESISTORS...................................................................07.39 ROTARY ENCODERS................................................... 07.70
ANALOGUE COUNTING DIAL MECHANISMS........... 07.45 ROTARY SWITCHES.....................................................07.70
POTENTIOMETER KNOBS.......................................... 07.45 KEY SWITCHES............................................................ 07.70
AND KNOB ACCESSORIES
TILT SWITCHES............................................................ 07.71
QUARTZ CRYSTALS.................................................... 07.48
TIME SWITCHES...........................................................07.71
CRYSTAL OSCILLATOR MODULES............................07.48
REED SWITCHES......................................................... 07.71
CERAMIC RESONATORS.............................................07.48
PERMANENT MAGNETS..............................................07.71
SEMICONDUCTORS
INTEGRATED CIRCUITS.............................................. 07.48
LOUDSPEAKERS AND SOUND
PIEZO TRANSDUCERS................................................ 07.71
TRANSISTORS..............................................................07.52
BUZZERS...................................................................... 07.71
DIODES..........................................................................07.55
HEADPHONES.............................................................. 07.72
LEDs.............................................................................. 07.56
MICROPHONES............................................................ 07.73
LASER DIODES............................................................ 07.60
SPEAKERS....................................................................07.73
OPTO COUPLERS........................................................ 07.60
SPEAKERS IN ENCLOSURES..................................... 07.73
THYRISTORS................................................................ 07.60
SPEAKER ACCESSORIES........................................... 07.74
TRIACS.......................................................................... 07.60
SENSORS
MOTORS
DC PERMANENT MAGNET MOTORS......................... 07.74
LIGHT SENSORS.......................................................... 07.60
DC GEARED MOTORS................................................. 07.75
SOUND SENSORS........................................................07.61
STEPPER MOTORS......................................................07.76
TEMPERATURE SENSORS..........................................07.61
DISPLAYS
LCD WITH DRIVER....................................................... 07.62
MINI SERVO MOTORS................................................. 07.76
TRANSFORMERS
CHASSIS MOUNT TRANSFORMERS..........................07.76
PLAIN LCD.................................................................... 07.62
RADIO AND TV
PCB MOUNT TRANSFORMERS.................................. 07.76
RF TRANSMITTER / RECEIVER MODULES............... 07.62 PLUG IN TRANSFORMERS......................................... 07.77
TV AMPLIFIERS............................................................ 07.64 TOROIDAL TRANSFORMERS..................................... 07.77
ANTENNAS................................................................... 07.64 VARIABLE TRANSFORMERS......................................07.77
RELAYS
SPECIAL APPLICATION TRANSFORMERS............... 07.77
REED RELAYS.............................................................. 07.64
TRANSFORMER AND FERRITE CORES.................... 07.78
PCB MOUNT RELAYS.................................................. 07.65
PLUG-IN RELAYS......................................................... 07.66
SWITCHES
TACTILE / KEYBOARD SWITCHES.............................07.66
BOOKS & MAGAZINES
Note: Our range of books cover a
vast spectrum in electronics and
computers. For additional circuits and data refer to the computer software section of the catalogue.
We continuously expand our
range of books. Our policy is to
cater for the practical person,
thus the books offered are filled
with circuits and projects to
build. For electronic components
required to build the circuits
described in the books refer to
the Electronic Components section in this catalogue.
CATALOGUE
ELECTRONICS123 CATALOGUE
The catalogue contains over 5000 different
products including:
Electronic projects, kits, books, components,
wires, soldering tools, test equipment, alarm
systems, batteries, meters, enclosures and
more.
(Should you order only the catalogue: the
catalogue with its postage and packaging will
cost thirty Rand: R30 VAT is included).
ORDER CODE: XB001
ELEKTOR ELECTRONICS
(OCTOBER 2004)
ATX Power Supply Tester checks voltages
Delphi for Electronic Engineers (1)
ORDER CODE: AB747
ELEKTOR ELECTRONICS
(FEBRUARY 2005)
In this issue:
Review on 22 Oscilloscopes
LabView: program for electronics engineers
Profilab-Expert: PC acquisition card software
Poor man’s 1GHz input buffer probe
Slave Flash for Digital Cameras
Four in a Row: electronic game project
ORDER CODE: AB391
ELEKTOR ELECTRONICS
(DECEMBER 2004)
In this issue:
Wireless Connectivity: WLAN, Bluetooth, etc.
Build the following:
13.56MHz RFID Detector
Wireless Microphone
VHF FM Antenna Booster
Butterfy Dipole Indoor Antenna for DVB-T
ORDER CODE: AB993
ELEKTOR ELECTRONICS
(MARCH 2005)
ELECTRONIC MAGAZINES
Note: The following magazines
were in stock at the time of printing.
ELEKTOR
ELEKTOR ELECTRONICS
(SEPTEMBER 2004)
In this issue:
Home automation using digital bus systems
USB / I2C and SMBus
I2C-homebus under PC control
Collection of circuits and component ideas
IR Remote Control
Kitchen table: LED Christmas Tree
ORDER CODE: AB715
ELEKTOR ELECTRONICS
(JANUARY 2005)
In this issue:
Anti-noise Systems
Opinions on Valves versus Transistors
2 x 40W High-end Power Amplifier
EL156 Valve Audio Power Amplifier
Solitaire Game using an ATMEL AT90S2313
Serially Programmable Crystal Oscillator
ORDER CODE: AC581
ELEKTOR ELECTRONICS
(APRIL 2005)
In this issue:
New Product Trends in Microcontrollers
Versatile: Basic, 8051, RS232, USB project
Step-by-step Construction: Rolling Dice
Bluetooth Remote using PDA / mobile phone
USB Embedded Host Controller
In this issue:
ORDER CODE: AB387
31 Power Supplies on the market compared
Theory: Cuk Switched-Mode Power Supply
Build a Cuk SMPSU
PIC18Flash Development Board
01.1
In this issue:
Microcontroller Comparison Guide
32-bit ARM micro. Development System
SC-Analyser 2005: Semiconductor Tester
Super Lithium Batteries: new developments
Lithium-polymer bat. charger for 2 or 3 cells
New Road Toll Systems: auto toll collection
ORDER CODE: AC357
ELEKTOR ELECTRONICS
(OCTOBER 2005)
ELEKTOR ELECTRONICS
(MARCH 2006)
In this issue:
Biometrical Imaging overview
Fingerprint-based authentication explained
PC Data authentication and Cryptography
Flash Lock for PCs instead of password
Texas Instruments TIRIS RFIDs and Reader
ORDER CODE: AC904
In this issue:
Versatile FPGA Module with the schematic
Cheap Logger using a web router
Travel Charger: use solar cell, Li-ion charger
Tge Good Old 6502 8-bit processor in use
Available Electronic Development Kits
Theory on Linear Motors and Applications
Application Board for R8C/13 microcontroller
ORDER CODE: AD268
ELEKTOR ELECTRONICS
(MAY 2005)
In this issue:
PetInspect: wearable computer for pets
Universal DCC Programmer Model Trains
Magnetic Flux Density Tester
5.1 Surround Switch Box: simply useful!
Description of Automotive Sensors
Glow Plug Heater for RC model engines
ORDER CODE: AC601
ELEKTOR ELECTRONICS
(DECEMBER 2005)
ELEKTOR ELECTRONICS
(APRIL 2006)
ELEKTOR ELECTRONICS
(SEPTEMBER 2005)
In this issue:
Electronic Warefare using invisible HPM
8-Channel A/D Converter via USB
Telephone Supervisor: logs calls on PC
Great ideas for Christmas gifts
PC-controlled colourful Light Strings
Remote Switching with mini R/C toy’s circuits
ORDER CODE: AD010
In this issue:
Modifying the Microsoft Xbox
Testing popular USB PC-Oscilloscopes
Build the following:
ESR / Capacitance Meter
Ultrasonic Distance / Liquid-level Meter
Precision Barometer / Altimeter
Optical Racetrack Timer using PC software
ORDER CODE: AC843
ELEKTOR ELECTRONICS
(JANUARY 2006)
In this issue:
Electrical Safety in circuits versus price
Rechargeable AA cell characteristics tester
Power halogen lamps with PC power supply
Using the R8C/13 hardware control functions
SPI Box quicker microcontroller programmer
ORDER CODE: AD269
NUTS & VOLTS
NUTS AND VOLTS
(MARCH 2005)
In this issue:
SMD Reflow Soldering Oven
Reverse engineering pulse-dial telephones
Environment: Battle against Electronic Waste
Build 95-Watt 19V 5A laptop PSU for the car
Build accurate camera shutter time meter
Build timer switch for your washing machine
ORDER CODE: AD267
01.2
In this issue:
Analogue-to-Digital Flash Conversion
Build a Geiger Counter (part 1)
Roulette / Dice Project
HDTV: the past, present and its future
Getting Started with PLCs (part 2)
PID controller theory (part 3)
ORDER CODE: AB988
NUTS AND VOLTS
(MAY 2005)
In this issue:
Supercomputers
Strobe Light photograhy for fast pictures
Thermal chamber: do tests below 0 degrees
Performing Integer Square Roots
Video Text Over Video using a PIC (part 2)
ORDER CODE: AC579
NUTS AND VOLTS
(SEPTEMBER 2005)
In this issue:
Description of the Capacitor Family Tree
Build a pool timer
Two simple methods of D/A conversion
The Space Elevator (SE)
ORDER CODE: AC906
NUTS AND VOLTS
(OCTOBER 2005)
NUTS AND VOLTS
(JULY 2005)
In this issue:
PIC-based Motorcycle Gear Indicator
Battery Analyzer for RC Power using a PC
The Ultimate Utility Meter (part 1)
BLOG your new home on the internet awaits
Construction of a BalloonSat for near space
Field Effect Transistors (FET) Basics
ORDER CODE: AC807
In this issue:
Basic Stamp Project: Candle with LED flame
The Heil Air Motion Transformer (AMT)
Wireless Mesh Networks with multiple nodes
Build a Basic MP3 Player Platform (part 1)
ORDER CODE: AC950
NUTS AND VOLTS
(NOVEMBER 2005)
NUTS AND VOLTS
(DECEMBER 2005)
In this issue:
The fying Marbellos Sculpture
The Poor Man’s CNC Milling Machine
Using the 4007UB CMOS digital IC
DIY Ethernet/frame thrower using ENC28J60
Internet End-to-End Digital Telephony
ORDER CODE: AD115
NUTS AND VOLTS
(JANUARY 2006)
In this issue:
CanadArm: the robotic arm like in space
Theory on Analogue Music Synthesizers
Auxiliary radio control channel for RC toys
build the Perceptron circuit like one neuron
Getting Started with PIC Microcontrollers
ORDER CODE: AD266
NUTS AND VOLTS
(FEBRUARY 2006)
NUTS AND VOLTS
(AUGUST 2005)
In this issue:
Deter Bluetooth Phracking (phone hacking)
PIC-Based Inductor / frequency Meter
Midi-nator: the USB to MIDI interface
The Ultimate Utility Meter (part 2)
SDR and Cognitive radio that thinks
ORDER CODE: AC905
In this issue:
Human / PC interface using XHTML + voice
Small DC motor PWM Speed Control
The ZILOG Z8Encore! XP microcontroller
An introduction to Analogue Filters
Build a Basic MP3 Player Platform (part 2)
ORDER CODE: AD001
01.3
In this issue:
Build a high speed photo flash trigger
Magnetic Amplifier Technology of the 1950s
Overview: short-range wireless technologies
Microchip PIC-based resistor checker
Use the LM399 to measure tiny air currents
ORDER CODE: AD248
modern audio circuits can no longer be
imagined. Variants of these four circuits
return in many of the other circuits contained
BUILD YOUR OWN HIGH-END AUDIO in this book.
Building circuits, including ancillary and speEQUIPMENT
cial ones, forms the practical parts of this
book. These circuits can be applied to audio
equipment as well as certain musical instruments. There are preamplifiers, filters, output
stages, power supplies, compandors, mixer
panels, level meters, bandwidth limiters,
headphone amplifiers, and playback stages,
as well as tips on construction and faultfinding. 350 Pages, size 17 x 23.5 cm, softcover.
ORDER CODE: GB544
HI-FI AND AUDIO
HANDBOOK FOR
SOUND TECHNICIANS
GB543
In the 1990s, top-of-the-range hi-fi apparatus
became known as high-end equipment, and
the name is a good indication of the prices
charged for it. For those who cannot, or will
not, pay these high prices, there is a solution
offered in this book: build your own at considerable cost savings. This book is aimed
not only at this sector of the market, but also
at the many enthusiasts who want to be able
to experiment and to make their own modifications to their high-end equipment.
Contents include solid-state and valve preamplifiers and power amplifiers, active
crossover filters, an active subwoofer, a
headphone amplifier and more. 262 Pages,
size 17 x 23.5cm, softcover.
ORDER CODE: GB543
DESIGNING AUDIO CIRCUITS
AB745
A sound technician has to be a jack-of-alltrades. The technician requires not only a
thorough knowledge of recordinf and playback audio equipment and electro-acoustics,
but must also have sufficient practical experience in electronics. Knowledge of music and
music instruments is also required to be able
to make recordings of a variety of music
instruments.
This book contains basic theory on microphones, musical instruments, various types
of amplifiers, loudspeakers, sound effects
equipment, recording techniques, lighting
equipment, faultfinding and small repairs. It
also contains a useful description of terms
that are used in sound engineering and a list
of adjectives that are used to describe sound
colouring. Written by F.P. Zantis, 318 Pages,
size 17 x 23.5 cm, softcover.
ORDER CODE: AB745
access PC interfaces using a DOS computer, under Windows things are not all that
simple. This book shows you how it can be
done.
The construction and operation of programs
and circuits for the following applications are
extensively described:
Control Circuits
Measurement Equipment using the
sound card and video capture card
Analogue / digital Converters
EPROM Programmer
Storage Oscilloscope
I2C Applications
Asynchronous serial data transmission
and many more
In addition to exact, practically oriented
descriptions of the traditional PC interfaces
(what can they do and how they are
addressed via software), the authors
describe the DIY construction and programming of a number of highly interesting circuits, all of which can be connected to the
PC ports. It is not necessary to open up the
PC for any of these projects.
The applications described in this book are
based on 32-bit operating systems (Windows
95/98). The preferred programming languages are Visual Basic and Delphi.
The CD-ROM contains all the example programs in VB5, Delphi 3 or Delphi 4, with all
source files in executable form. PORT.DLL is
also included. In addition, there are two complete application programs on the CD-ROM:
COMPUNI.EXE - a universal interface application program
SSCAN.EXE - a complete oscilloscope application for the sound card.
Burkhard Kainka, Hans-Joachim Berndt
265 Pages, size 17 x 23,5 cm
ORDER CODE: GB545
MICROCONTROLLERS
EASY STEP'N VERSION 1.0
COMPUTERS
GB544
How does speech, music, or, indeed, any
sound get from the record, the CD, or the
cassette tape to the loudspeaker? This is a
question that many people keep on asking
and to which this book endeavours to give a
comprehensible answer.
Understanding the background of the
process is a first requirement, which is why
the author in the description of single components makes clear what exactly happens
in the component. An understanding is also
engendered of phenomena such as noise,
hum, distortion, and others, as well as standards such as the decibel and the RIAA
characteristic.
Designing circuits is well nigh impossible
without an understanding of the various networks involved in the conversion of the input
sound to the sound emanating from a loudspeaker. To this end, the author describes
four important basic circuits using an operational amplifier, a component without which
PC INTERFACES UNDER WINDOWS
GB404
“Easy Step'n, An Introduction to Stepper
Motors for the Experimenter,” explains to
the reader how to determine surplus motor
electrical and mechanical specs by using
easy-to-build electrical and mechanical test
equipment. The experimenter will learn to
design and build microcontroller based control systems and to design and build driver
circuits to switch power applied to stepper
motor windings. The book is hands-on and
full of experiments. The format of the books
uses flow charts and many code examples in
a step-by-step approach. By David Benson,
200 pgs, 218 x 278mm.
PC Interfaces can be used for more than just
ORDER CODE: GB404
the printer, mouse, modem and joystick!
Although It was relatively easy to directly
GB545
01.4
EASY MICROCONTROL’N VERSION
4.0
tion between a PIC microcontroller and a PC
via a RS-232 conversion circuit and a terminal program. These techniques are used in a
digital voltmeter/data logger experiment for
uploading data to a PC for display plus
graphing using a spreadsheet program.
Moving up or down from the now familiar
PIC16F84 to other devices is covered in
detail so that you will easily be able to work
with the new devices being introduced by
Microchip. Finally, use of the Microchip in-circuit debugger (ICD) is described.
"Microcontrol'n Apps" gives the reader the
tools to design, build, and debug intermediate level microcontroller-based instrumentation and systems. By David Benson, 437
pages, 218 x 278mm.
ORDER CODE: GB369
GB403
“Easy Microcontrol'n” is intended to ease the
beginner toward understanding and application of the PIC line of microcontrollers from
Microchip Technology, Inc. This book is the
same as Easy PIC'n. Examples of assembly
language programs range from a simple one
to turn on LED's to more complex ones for
timing and for event-counting. Writing programs is covered in-depth and the use of
flow charts, as an aid to visualizing what a
program does, is emphasized. The approach
is hands-on with many examples, all of
which may be demonstrated using a very
simple demo board (a project) in the beginning of the book. By David Benson, 178
pages, 218 x 278mm.
ORDER CODE: GB403
SERIAL COMMUNICATIONS
VERSION 3.0
GB559
TIME’N AND COUNT’N VERSION 1.0 This book introduces serial communications,
GB370
including asynchronous and synchronous
communications. This book is the same as
Serial PIC'n, but with new information on
I2C hardware slave. It shows you how to
communicate serially with the PICmicro family of microcontrollers and provides you with
a large set of serial communications functions and subprograms. These source code
modules make up the PICmicro Serial
Communications Toolbox and implement
most of the serial operations you will need
for your embeded PICmicro applications.
Serial Communications is a comprehensive
advanced level book which details various
methods for implementing serial communications between a Microchip PIC microcontroller and an external device. Asynchronous
serial communications is covered both by
using an on-chip USART and by bit-bang
methods. The RS-232 standard is explained.
A discussion of synchronous serial communications includes the I2C (Philips
Semiconductors), SPI (Motorola) and
Microwire (National Semiconductor) protocols. The Dallas Semiconductor 1-Wire bus
is described. Many code examples are
included as modules which will provide the
basis for the reader's own PIC microcontroller applications. By Roger Stevens, 566
pages, 218 x 278mm.
ORDER CODE: GB559
“Time'n and Count'n” is an intermediate level
book on 16-bit timing and counting applications using Microchip Technology's PIC
microcontrollers. Customers who have
PIC'n Techniques should not buy this
book. More opportunities for creating fun
projects are described. Learning to use timer
1 (TMR1) with it's powerful capture, compare
and pulse width modulation (PWM) modes
will expand your PIC microcontroller design
capabilities significantly. TMR1, which is an
on-board feature of many of the mid-range
PIC microcontrollers, is a 16-bit timer/counter. The maximum count is 65,535 vs. 255 for
timer 0 (TMR0). This is a big help! TMR1
used in conjunction with the capture, compare, PWM (CCP) module may be proDATA, THEORY AND
grammed to do useful things unattended
REFERENCE
leaving the PIC free to perform other tasks.
“Microcontrol'n Apps” is an intermediate level A special pin may be used for external inputs
applications guide covering Microchip
to TMR1 and another special pin may be
APPLIED BASIC ELECTRONICS /
Technology's PIC Microcontrollers. This
used as an external output from TMR1. The
TOEGEPASTE BASIESE
book is an improved “PIC'n Up The
techniques presented in the book are useful
ELEKTRONIKA
Pace”. Serial communication as a means of for generating single time intervals and free
transferring data between PIC microconrunning outputs as well as for measuring
trollers and peripheral chips and also
period and frequency. PWM using TMR1
between two or more PIC microcontrollers is unattended is also described. These timing
described. Use of the 93C46 serial EEPand counting techniques serve as the basis
ROM is detailed as an example. Since we
for designing and building your own period
live in an analog world, A/D and D/A are dis- and frequency generating and measuring
cussed with several methods illustrated for
test equipment as described in the book. By
each. Conditioning signals from sensors with David Benson, 218 pages, 218 x 278mm.
an analog voltage output is described.
ORDER CODE: GB370
Interfacing PIC microcontroller-controlled
systems with humans requires some math,
binary to decimal conversion and vice versa,
alphanumeric LCD interfacing and scanning
keypads. Single wire serial communication
with a PIC-controlled LCD module which can
be built by the reader is included. A digital
thermometer project brings these topics
The main factor in writing this book is to protogether as an example. The book also
vide a book which is easy to read, easy to
explains how to establish serial communicaunderstand and has the minimum of mathe-
MICROCONTROL’N APPLICATIONS
VERSION 2.0
GB369
VB045
01.5
matics. The book’s main attempt is to give a
practical, no nonsence introduction to the
basic components and circuits found in
everyday electronics. The book is written in
both English and Afrikaans. By Deric
Aspeling
EASY CNC
A BEGINNER'S GUIDE TO CNC
TECHNIKA ELEKTRONIES/
ELEKTRIES GR 11
Die hoofoorweging vir die skryf van hierdie
boek is om ’n boek daar te stel wat maklik is
om te lees, te verstaan en wat ’n minimum
wiskunde bevat. Die hoofdoel van die boek
is om ’n praktiese, geen nonsens, inleiding
te gee tot die basiese komponente en
stroombane wat in die allerdaagse elektronika aangetref word. Die boek is in beide
Afrikaans en Engels geskryf. Deur Deric
Aspeling.
ORDER CODE: VB045
APPLIED DIGITAL ELECTRONICS / “Easy CNC” is a guide for beginners who
want to learn about CNC (computer numeriTOEGEPASTE SYFERELEKTRONIKA
VB046
The book approaches the subject of applied
digital electronics in a practical and straightforward manner, making it an easy teacher
for the hobbyist as well as for the serious
student. Mathematics has been kept to the
absolute essentials and should not deter
those readers without any schooling in higher mathematics. Since the subject is a vast
one and impossible to cover comprehensively in a volume of this size. The book concentrates on those standard digital building
blocks to be found in any digital circuit. The
book is written in both English and Afrikaans.
By Deric Aspeling.
Die boek benader die onderwerp van
toegepaste syferelektronika op ’n praktiese
en eenvoudige manier, wat dit ’n maklike
’onderwyser’ maak vir beide die knutselaar
asook die ernstige student. Wiskunde is
beperk tot die absoluut-noodsaaklike en
behoort dus nie daardie studente met geen
opleiding in gevorderde wiskunde af te skrik
nie. Aangesien die onderwerp enorm is en
dit onmoontlik is om volledig te dek in ’n volume van hierdie grote word daar gekonsentreer op die standaard syferelektronikaboustene wat in enige syferstroombaan
aangetref word. Die boek is in beide
Afrikaans en Engels geskryf. Deur Deric
Aspeling.
ORDER CODE: VB046
Die boek bevat prakties uitvoerbare elektroniese en elektriese eksperimente met
cal control) concepts. CNC methods and
bykomende vrae. Die teorie wat behandel
machines enables one to duplicate parts with word is ooreenkomstig die graad 11 skoolsillminimum labor and cost. The authors goal
abus. Elke eksperiment het meegaande
with this book is to present the EASY way of praktiese en teoretiese invulvrae met
actually making something with CNC. The
voorgestelde punte toekennings.
examples in this book are based on using
Gevolgtrekkings bevat invulvrae wat die
software that works and is easy to use.
werking van kringbane en komponente
Software is not included. You do not have to opsom. Alle eksperimente is prakties
be a computer expert to use this book, but
getoets. Volledige memorandums is apart
you need to know the fundamentals.
beskikbaar. Saamgestel en geskryf deur C.F.
Some of the topics covered are as follows:
Marais, 131 bladsye, 210 x 297mm.
using a computer
ORDER CODE: GB365
CNC concepts: toolpath
MEMORANDUM VIR
CNC software: G-code
EKSPERIMENTBOEK GR 11
CNC machine operation:
creating drawings: CAD programs
using a CAM program - DXF to G-code
By David Benson, 200 pages, 214 x 275mm.
ORDER CODE: AC844
TECHNIKA
ELEKTRONIES/ELEKTRIES GR 10
Die boek bevat al die antwoorde op die vrae
in Eksperimentboek Graad 11 (GB365).
Saamgestel en geskryf deur C.F. Marais,
145 bladsye, 210 x 297mm.
ORDER CODE: GB367
word is ooreenkomstig die graad 10 skoolsillabus. Elke eksperiment het meegaande
praktiese en teoretiese invulvrae met
opsom. Alle eksperimente is prakties
ORDER CODE: GB364
TECHNIKA ELEKTRONIES/
ELEKTRIES GR 12
word is ooreenkomstig die graad 12 skoolsil-
01.6
labus. Elke eksperiment het meegaande
praktiese en teoretiese invulvrae met
opsom. Alle eksperimente is prakties
ORDER CODE: GB366
TECHNICS ELECTRONIC/ELECTRIC
GR 12
with essential formulae, circuit symbols and
heaps of worked examples with detailed calculations to ensure success in N1 Industrial
Electronics. This book is also suitable for
persons studying Electrical or Radio and TV
theory, Grade 10 (Std 8) Technicon students,
teachers and hobbyists. By Deric Aspeling,
66 pgs, 256 x 289mm.
ORDER CODE: AA294
TOWERS INTERNATIONAL
MOSPOWER AND FET SELECTOR
NTE CROSS-REFERENCE
DATA BOOK
EB889
The book contains some 9000 devices - high
power, small signal junction and MOSFETS.
Similar in format to the companion EB890,
this data reference will establish basic
parameters and if necessary possible substitutes for the majority of discrete Field Effect
Transistors.
ORDER CODE: EB889
EB838
This book is the English translation of
Technika Elektronies / Elektries Gd 12
(GB366). Compiled and written by C.F.
Marais, 151 pages, 210 x 297mm.
ORDER CODE: GB554
MEMORANDUM VIR
EKSPERIMENTBOEK GR 12
NTEs 11th edition of it`s Semiconductor
Technical Guide and Cross Reference. The
book is designed to give assistance in
selecting the NTE component best suited for
their specific application or circuit. If you
have a device and know the part number
you may simply turn to the cross-reference
section to locate and appropriate NTE
replacement. You can also the Product
Alphabetical Index to locate products.
ORDER CODE: EB838
UP-TO-DATE WORLDS
TRANSISTORS, DIODES,
THYRISTORS & ICS VOL. 1
TOWERS INTERNATIONAL
TRANSISTOR SELECTOR
UPDATE 5
EB876
An excellent reference book. This book lists
semiconductor manufacturer codes from A to
Z. Over 200 000 comparisons and equivalents. Comparison tables of transistors,
diodes, thyristors and ICs. Nearly 130 000
types with brief data and pin assignment.
ORDER CODE: EB876
Die boek bevat al die antwoorde op die vrae
in Eksperimentboek Graad 12 (GB366).
Saamgestel en geskryf deur C.F. Marais,
155 bladsye, 210 x 297mm.
ORDER CODE: GB373
N1 INDUSTRIAL ELECTRONICS
UP-TO-DATE WORLDS
TRANSISTORS, DIODES,
THRYRISTORS & ICS VOL. 2
EB890
This book has already established itself as
the most user-friendly short-form transistor
substitution manual. Update 5 offers many
new entries plus a surface mount crossindex. There is enough data for the user to
be able to determine the salient parameters
and likely alternatives for the majority of discrete bipolar transistors. Over 29 000 transistors listed.
ORDER CODE: EB890
This book lists semiconductor manufacturer
codes from 1N to 2S, numbers up to
60 000 and codes starting with ‘µ’.
It includes comparison tables and brief data
The companion bookfor those embarking on
a course in Industrial Electronics N1 at any
Technical College. The book is crammed
01.7
and pin assignments of different types of
transistors, diodes, thyristors and ICs that
are used daily.
Over 200 000 comparisons and equivalents
are given.
ORDER CODE: EB877
305 CIRCUITS
308 CIRCUITS
GB537
308 Circuits, the ninth in the 300 series of
circuit design books, contains a wide range
of circuits, tips and design ideas. This book
is a compilation of articles originally published in the Small Circuits Collection sections of the July/August and December
issues of Elektor Electronics magazine, year
volumes 2000, 2001 and 2002.
The book has been divided into sections,
making it easy to find related subjects in a
single category.
308 Circuits not only detailed DIY electronic
circuits for home construction but also inspiring ideas for projects you may want to
design from the ground up. Because software in general and microcontroller programming techniques in particular have become
key aspects of modern electronics, a number
of items in this book deal with these subjects
only.
Like its predecessors in the 300 series, 308
Circuits covers the following disciplines and
interest fields of modern electronics: test &
measurement, radio and television, power
supplies and battery chargers, general interest, computers and microprocessors, circuit
ideas and audio & hi-fi.
368 Pages, Size 17 x 23,5 cm, softcover
ORDER CODE: AB188
GENERAL CIRCUITS
AND PROJECTS
302 CIRCUITS
AB188
GB542
Like its predecessors in the 300 series of
electronics projects books, 302 Circuits is
aimed at the active electronics enthusiast,
professional or amateur. Since the series
was started in the early 1980s, many thousands of readers have found in these books
that new approach, new concept, or new circuit they were looking for.
In 302 Circuits you will find new ideas, new
concepts and new circuits covering the
gamut of electronics. The book is arranged
in subject sections to make it easier for you
to find the circuit or idea you are looking for.
354 Pages, size 14 x 21 cm, softcover
ORDER CODE: GB542
Above all, 305 Circuits demonstrates the
practical aspects of electronics through projects that can be built at home, in a small
workshop, or in the physics or science
department of schools and colleges.
There are projects for everyone, covering
audio & hi-fi, computers & microcontrollers,
music and electrophonics, radio & television,
and test & measurement. The projects range
from fairly simple circuits for use in the home
to complex ones like communications
receivers and computer adjuncts.
ORDER CODE: GB537
307 CIRCUITS
304 CIRCUITS
THE 555 IC EXPERIMENTER’S
CONSTRUCTION KIT
GB536
307 Circuits, the eighth in the 300 series of
circuit design books, is a compilation of
applications, projects, circuits and tips originally published in the July/August and
December issues of Elektor Electronics magazine. This book brings the total of published
designs in the 300 series to well over 2,300.
Books in the 300 series are popular with
engineers, students, teachers, hobbyists and
other electronics enthusiasts all over the
world.
ORDER CODE: GB536
GB538
Like its predecessors in the 300 series of
electronics projects books, 304 Circuits is
aimed at the active electronics enthusiast,
professional or amateur. Since the series
was started in the early 1980s, many thousands of readers have found in these books
that new approach, new concept, or new circuit they were looking for.
In 304 Circuits you will find new ideas, new
concepts and new circuits covering the
gamut of electronics. The book is arranged
in subject sections to make it easier for you
to find the circuit or idea you are looking for.
336 Pages, size 17 x 23,5 cm, softcover
ORDER CODE: GB538
This book explains 23 useful circuits that you
can build. Fun for beginners and a useful
reference for experienced hobbyists. The
book will teach you about the most common
of all Integrated Circuits - the 555 IC. The
book is divided up into two parts - the practical experiments, and the technical reference
about the 555. All you need to build the projects is school science and a bit of common
sense, the theoretical part is a bit harder and
assumes that you have some idea about
electronics and that you know how a resistor,
capacitor and a transistor works.
01.8
Please note that this is only the book and
nothing else is supplied with it.
ORDER CODE: VB050
SERVICING MANUAL
HOW TO REPAIR TV’S IN SA
(BLACK & WHITE TV’S)
Fault-finding basics:
- fault sources, failure mechanisms and fault
models
- principles of testing and diagnosis
- recognition and localization of faults
- substitution and differential diagnosis
Built-in provision for testing and fault-finding:
- on-line error detection
- accessibility
- built-in self-test provision
Test and measurement techniques:
- theory
- measuring basic electrical values
- using the oscilloscope
- testing digital circuits
Practical testing and fault-finding:
- an extensive treatment of testing and faultfinding at the component and assembly
level, with specific reference to modern PC
systems.
ORDER CODE: AC609
The book aims at guiding the newcomer to
TV repair through the faulty sets to easy and
quick fault diagnosis. The book explains the
fundamental operation of a TV receiver without using radio and electronic theory with
complex mathematical equations. It is
assumed that anyone attempting TV repair
has the necessary knowledge and experience of fundamental electronic circuits and
component operation and testing. By Deric
Aspeling, 128 pgs, 210 x 290mm.
ORDER CODE: VB047
FAULTFINDING IN COMPUTERS
AND DIGITAL CIRCUITS
Modern electronic equipment is characterized by the predominance of digital techniques, high clock rates and complexity. This
applies not only to specialized equipment
such as microprocessor systems, microcontrollers and "industrial" PCs, but also to consumer items such as personal computers,
multimedia devices, digital television and so
on.
The knowledge and technical skills needed
to put such equipment into service, and to
maintain it in good working order, go beyond
the level of simple self-help tips and basic
measurements.
The object of this book is to help the reader
to acquire this knowledge and understanding. It is primarily aimed at PC users, service
technicians, PC hobbyists and persons who
are responsible for their firm's PC systems,
but it should also be useful for students and
vocational trainees.
This book addresses the following subjects:
01.9
01.10
KITS & MODULES
Note: This section of the catalogue contains kits and modules.
Definitions:
An electronic building kit consists of an instruction pamphlet,
a PCB (printed circuit board) and
all the electronic components
that are required to assemble the
complete circuit board of the kit.
The aim with a kit is for the end
user to do all the assembly work
by soldering (mounting) the electronic components onto the PCB.
The supplied instruction pamphlet should be used as an
assembly guide.
STEGOMECH
AUTOMECH
Dimensions: 370 x 100 x 180mm
KIT ORDER CODE: GC139
SKELETON
TRAINMECH
A module is a pre-assembled kit.
A module is a completely soldered, pre-assembled electronic
kit / circuit that is tested before
sale.
Please Note: Some of the kits are
used with mains, 230Vac, power
supply and should only be used
under responsible supervision.
ROBOTICS AND
MECHANICAL MOTION
HEXAPOD ROBOT
ROBOMECH
MOTORISED MECHANICAL
WOODEN KITS
A series of motorised, mechanical, wooden,
non soldering kits for future engineers. Learn
about the operation of transmissions steered
by gears and driven by an electric DC motor.
It is easy to build and does not require any
glue or soldering.
Features:
Transmission: gear drive operation,
supplied with: pre-punched boards, gearbox,
gears, shafts, switch, motor, battery holder
and all necessary parts,
instructions are easy to follow,
Power Supply: 2 x 1.5V size AA cells (not
included)
Required Tools: knife, screwdriver, long-nose
KIT ORDER CODE: GB825
pliers
TYRANNOMECH
COPTERMECH
02.1
This Hexapod Robot kit is ideal for the future
engineer. Build this kit and find out how
much fun electronics & mechanics can be!
This Hexapod Robot uses infrared (IR) emitting diodes for eyes and propels itself with its
6 legs. It moves backward, to the left, while
detecting an obstacle in front of it and from
then on it keeps moving forward as long as
the sensor does not detect any new obstacles. This kit contains two motors, each with
its own gear set (unassembled).
Specifications:
power supply:
Powering the Motors:
2 x 1.5V size AA cells (not included)
Powering the Electronics:
9V-battery (not included)
Dimensions: 130 x 140mm, 100mm height
ROBOT FROG
CRAWLING MICROBUG
it stops in total darkness.
Specifications:
Power Supply: 2 x 1.5V size AAA cells (not
include)
Dimensions: 100 x 60mm
SCARAB ROBOT KIT
This is a robot kit for the future engineer.
Build these kits and find out how much fun
electronics & mechanics can be!
The Robot Frog has a sound sensor. Control
it by clapping your hands each time that you
want to change the way it moves. Its motion
changes sequentially, with every clap, in the
following order:
start (move forward) -> stop -> left turn ->
stop -> right turn -> stop.
This kit contains two motors, each with its
own gear set (unassembled).
Specifications:
Powering the Motors:
2 x 1.5V size AA cells (not included)
Powering the Electronics:
9V-battery (not included)
ROBOT CAR
This is an attractive, brightly coloured, bugshaped, miniature robot kit. The Crawling
Microbug is always hungry for light and consequently it drives towards it.
Features:
it uses 2 open chassis sub-miniature motors,
it has adjustable light-sensitivity that suits
almost any light condition and controls it’s
‘bug-like’ behaviour,
adjustable driving speed,
choose between two different walks,
LED ‘eyes’ indicate the driving direction,
it stops in total darkness
Specifications:
included)
The Scarab Robot is an attractive, bugshaped, miniature robot that uses 2 touch
sensors to detect obstacles. One must try
building this kit to find out just how much fun
electronics and mechanics can be!
When its antennas (touch sensors) detect an
obstacle, it will first step back and then automatically execute a two-step maneuver. The
maneuver is a combination of “left turn”,
“right turn”, “reverse” and “stop”. It does so
in an attempt to avoid bumping hard into
obstacles or getting stuck.
The robot moves about on 6 legs. Two sets
of differently designed legs, which move in
CRAWLING MICROBUG WITH SHELL their own distinct way, are supplied with this
kit.
Specifications:
included) use (AC589)
KIT ORDER CODE: AC856
LADYBUG ROBOT KIT
This is the Crawling Microbug kit that is supplied with a bug-shaped shell. The shell is
made of lightweight plastic. This kit has the
This is a robot kit for the future engineer.
same specifications as (GB601) except for
Build these kits and find out how much fun
the additional shell.
electronics & mechanics can be!
Specifications:
This Robot Car makes use of a sound senPower Supply: 2 x1.5V size AAA cells (not
sor. It usually moves straight forward, but
included)
each time the sensor detects noise or when Dimensions: 130 x 90mm, 50mm height
the car bumps into an object it will reverse to
KIT ORDER CODE: AB356
the left and automatically go forward again.
RUNNING MICROBUG
This kit contains one motor with a gear set
(unassembled).
Specifications:
Power Supply: 2 x 1.5V size AA cells (not
included)
This is an attractive, brightly coloured, bugshaped, miniature robot kit. The Running
Microbug is always hungry for light and consequently drives towards it!
Features:
It uses two open chassis sub-miniature
motors
it has adjustable light-sensitivity that suits
almost any light condition and controls it’s
‘bug-like’ behaviour
LED ‘eyes’ indicate the driving direction
02.2
The Ladybug Robot is an attractive, bugshaped, miniature robot. One must try building this kit to find out just how much fun
It uses IR (infra-red) emitting diodes and IR
sensitive photo diodes for “eyes”.
The robot normally walks in a straight line.
When it senses an obstacle, in front of it, it
will automatically keep on making a left turn
until its forward path is clear again.
their own distinct way, are supplied with this
kit.
Specifications:
Dimensions:
Robot: 120 x 150 x 85mm
Length per Feeler: 40mm
ESCAPE ROBOT KIT
COMPUTER INTERFACE
FOR 4 WIRE
STEPPER MOTORS
MODULE ORDER CODE: GB754
MANUFACTURED BY: KEMO
4-WAY INTERFACE SPLITTER
The Escape Robot is an attractive, bugshaped, miniature robot. One must try building this kit to find out just how much fun
It never fails to find its way out of a maze. It
uses 3 IR (infra-red) emitting diodes to transmit invisible light and 1 IR receiver module to
receive IR light that is reflected back.
A built-in microprocessor enables it to
process the gathered information on its
immediate surroundings so that it can avoid
bumping into obstacle.
their own distinct way, are supplied with this
kit.
Specifications:
MANUFACTURED BY: VELLEMAN
DRIVER FOR 6 WIRE
STEPPER MOTORS
This module drives 4-wire, bipolar stepper
motors, like (GB500), by using a personal
computer. The motor may either be controlled by hand, using the computer keyboard, or by automatic program flow, written
by the user. It is connected to the computer’s
printer port, LPT1, and is controlled with the
supplied software:
DOS and Win98 / NT / 2000 / ME / XP.
The user manual is also supplied on disk.
The operating voltage of the module and the
stepper motor is the same. It is possible to
operate up to 4 of these modules simultaneously by using the PC Interface Splitter module (GB808).
Specifications:
Supply Voltage: dual supply ± (4 - 18Vdc)
Supply Current: 2A max.
COMPUTER INTERFACE
FOR 6 WIRE
STEPPER MOTORS
This module can drive a 6 wire stepper
motor without using a personal computer.
The direction and speed of rotation of the
stepper motor’s axis can be controlled. A
double pole switch (FB801) is required for
changing the direction of rotation. A linear
1M Ohm potentiometer (HB171) is required
for changing the speed of rotation. The operating voltage of the module and the stepper
motor is the same.
Specifications:
Supply Voltage: 5 - 12Vdc
Stepping Frequency: 2 - 1000 Hz
This module drives 6-wire, unipolar stepper
motors, like (GB499) and (AB217), by using
a personal computer. The motor may either
be controlled by hand, using the computer
keyboard, or by automatic program flow,
written by the user. It is connected to the
computer’s printer port, LPT1, and is controlled with the supplied software for DOS
and Windows. The user manual is also supplied on disk. The operating voltage of the
module and the stepper motor is the same. It
is possible to operate up to 4 of these modules simultaneously by using PC Interface
Splitter module (GB808).
Specifications:
02.3
This 4-way interface splitter module is meant
to be used with the 4 wire stepper motor
driver (GB785) or 6 wire stepper motor driver
(GB754). It is connected to the computer’s
printer port, LPT1, and then up to 4 motor
interface modules may be connected and
operated independently at the 4 interface
outputs.
BIPOLAR
STEPPER MOTOR DRIVER
This is a very useful circuit to drive bipolar
stepper motors that have 4 or more wires. A
six wire unipolar stepper motor can be connected as a bipolar motor if the two center,
(common), wires are left unused. The circuit
and stepper motor may use separate supply
voltages. It uses four MTP2955 and four
IRFZ44 high current MOSFETS. It can operate either freestanding or PC-controlled. The
motor can be stepped single steps with a
STEP input. The direction of rotation can be
set with the DIRection input. Both inputs are
opto-isolated by the 4N25 optocouplers and
should be controlled with externally supplied
5Vp-p pulses / levels. This innovative circuit
only uses standard CMOS IC's 4013 and
4030.
Specifications:
Supply Voltage: (kit) 8 - 30Vdc
(stepper motor): 5 - 50Vdc
Trigger Voltage: 5Vdc
Trigger Current: 4.3mA
Supply Current: (kit) 100mA max.
(stepper motor): 6A max. per winding
MANUFACTURED BY: DIY
UNIPOLAR
STEPPERMOTOR DRIVER
STEPPER MOTOR-CONTROL
any power source. The stepper motors
require power. The kit is designed to fit into
an extended D-shell plastic case (included).
A DOS based program written specifically to
drive stepper motors should be downloaded
from the Internet:
http://kitsrus.com/soft.html the file k113.zip
(C source code for DOS).
KIT ORDER CODE: AA249
STEPPER MOTOR CARD
WITH STEPPER MOTOR
This kit is a very useful circuit for driving 5, 6
or 8-wire unipolar stepper motors. It can
operate either freestanding or PC-controlled.
The circuit and stepper motor may use separate supply voltages. Four high current
IRFZ44 MOSFETs are used at the output.
The motor can either be stepped by the
internal, variable oscillator or by external
5Vp-p pulses. The direction of rotation can
be set with a switch. This innovative circuit
only uses standard CMOS ICs 4013, 4030
and 4093. Full explanations are given.
Specifications:
Supply Voltage: (kit) 7 - 12Vdc
(stepper motor): 8 - 35Vdc
Supply Current: (kit) 0.1A max.
(stepper motor): 6A max. per winding
A 6-branch unipolar stepper motor can be
operated with this kit. The kit works without a
computer. Suitable for 6 to 12V stepper
motors with a maximum branch current of
1.5A. The stepping rate can be adjusted
between 15 and 240 steps per second. An
addisional double pole, double throw (DPDT)
toggle switch (DB252) is required to change
the direction of rotation. The operating voltage of the stepper motor is the same as the
supply voltage of the kit (6 to 12VDC).
KIT ORDER CODE: FB645
This is a stepper motor card kit that is capable of controlling uni- and bi-polar stepper
motors (maximum 1A). A high precision, 12V
stepper motor, (AB216), and a test program
is supplied with this kit. This kit has to be
used together with the PC Interface Board
ENCODER
(GB693) (not included). It is easily connectSTEPPER MOTOR DRIVER
ed to the PC interface board, via 3 wire connections. While the motor turns you can
simultaneously check the status of switches
using the PC interface board or drive anothUNIPOLAR STEPPER MOTOR
er stepper motor. You can always give an
DRIVER (555 & UCN5804)
emergency stop signal. There are two onboard tactile push-buttons to test the card
without the PC Interface Board. The circuit
and stepper motor have to use the same
supply voltage. This kit can be used in every
application where positioning is required: for
This kit illustrates the complex operations
example a plotter, a printer, a valve, etc…
that can go on inside modern dedicated inte- Specifications:
grated circuits. A pre-programmed PIC16C54 Motor and Circuit Supply Voltage: (depends
and a stepper motor driver IC UCN5804B,
on the motor voltage) 7 - 25V DC or AC
from Allegro Microsystems, are used in this
Supply Current:
This kit drives any 5, 6 or 8-lead unipolar
kit. The kit is designed for 6-wire unipolar
200mA (card) + 1A max. (motor)
stepper motor. The circuit is based on the
stepper motors. A bi-directional, digital,
Communication
Protocol: I²C
purpose made stepper motor controller IC,
rotary encoder is supplied to step a unipolar Controlled by a computer printer port via
UCN5804, from Allegro Microsystems. All
stepper motor. Each turning click of the
the required PC Interface Board (GB693)
features of this IC (direction, on/off, pins 9 & encoder causes the stepper motor to turn
The address, 0 to 15, of the card is selec10) are utilised using 5 on-board SPDT
either half a step or one step at a time. The table via 4 on-board DIP-switches
switches. A continues pulse train from a 555 direction in wich the encoder knob is turned
astable, adjustable oscillator is used to con- determines the turning direction of the step- Please note that only up to 4 controller cards
trol the stepper motors’ stepping rate of rota- per motor. The driving voltage of the stepper can be used per PC Interface Board
Program: Turbo Pascal in DOS, Quick Basic
tion. In order to do fine, single-step position- motor is the same as the supply voltage of
and Visual Basic (Win95/98/ME)
ing, switch to manual mode and press the
this kit. The stepper motor is not included.
Adjustable drive speed
on-board tactile switch each time to make a Specifications:
Emergency stop can be sent to one
step. Four LEDs enable one to see the
or all cards
phase pattern, coils being turned on/off, dur- Supply Current per Winding: max. 1.25A
ing every step that is made. Three stepping Dimensions: 46 x 57mm, 25mm height
methods are supported. Full explanation is
KIT ORDER CODE: EB624
given.
Specifications:
1 TO 4 SERVO MOTOR DRIVER
PARALLEL PORT
USING PIC16C711
Supply Current per Winding: max. 1.25A
DUAL STEPPER MOTOR DRIVER
This kit enables users to control two unipolar
stepper motors via a parallel/printer port of a
Using a PIC16C711 this kit will independentPC. Four digital inputs are also included.
ly control up to 4 servo motors. Servo
These can be used for monitoring external
motors are used in radio-controlled models
switches and inputs. The kit does not require
02.4
(cars, planes), robotics, theme park special
effects, test equipment, industrial automation. The motors themselves are black boxes
which contain a motor, gearbox and decoder
electronics. Three wires go into the box; 5V,
ground and signal. One potentiometer is
required for each motor. The potentiometers
and the servo motors are not supplied.
Full instructions provided. The program is
included in the instruction paper.
Required potentiometer(s): 1 to 4 potentiometers 10k Ohm (HB167) (not included)
Supply Voltage: 5V DC
LEAD-ACID BATTERY
CHARGER / CONDITIONER
BATTERY CHARGERS
AND BATTERY
ACCESSORIES
This lead-acid battery charger/conditioner kit
is suitable for charging and maintaining both
sealed and open type 6V and 12V lead-acid
batteries. Charging current: 0.3 or 1A. The
battery can be hooked-up to the unit for an
indefinite time, and will be kept in optimal
13.8V/1A POWER SUPPLY /
condition. The battery voltage and charging
CHARGER
current are selectable, while the charging
process is fully automatic. The heat sink is
supplied. It requires an 18V transformer.
Specifications:
Supply Voltage: 18Vac
Supply Current: 1.5A
a suitable 18V transformer is (AA750)
Please Note: Do not charge NiCd, NiMH or
non-rechargeable batteries with this unit
Recharge only one 6V or 12V, sealed or
open type, lead-acid battery at a time
Selectable Charging Current: 0.3 or 1A
This 13.8Vdc regulated power supply modStatus Indicator LEDs: for charge, float, endule can serve as a charger specifically for
of-charge and for reversed battey polarity
12V lead acid batteries. It has an output curProtection against reversed battery polarity
rent limit between 1 and 2 Amps. It can be
permanently connected to a 12V lead acid
battery without over charging it. It has a
MANUFACTURED
BY: VELLEMAN
built-in output diode that prevents the battery
MANUFACTURER CODE: K8012
from ever discharging into the charger. It has
2 output leads with spade connectors and a
CHARGING CURRENT SPLITTER
power on indicator LED. It requires a 16V
FOR
TWO LEAD ACID BATTERIES
DC / AC power supply like (PB032).
MODULE ORDER CODE: FB400
UNIVERSAL NI-CD BATTERY
CHARGER 5-600MA
This is a battery charger for 1.2 to 15 Volt
NiCd batteries. It automatically adjusts the
charging voltage across the battery in order
to regulate the constant charging current. An
indicater LED shines while batteries are
charging. The constant charging current is
set by using one of seven supplied resistors.
A heatsink is supplied.
Specifications:
Supply Voltage: 18 - 20V (AC or DC)
Select one of the following charging currents:
5, 10, 25, 45, 100, 200 or 600mA.
Dimensions:
PCB: 55 x 55mm
Heatsink: 60 x 72 x 18mm
Not Included:
Transformer: 230 to 2 x 9V, 0.6A (AB888)
MANUFACTURER CODE: B079
LOW COST
UNIVERSAL BATTERY CHARGER
13.8V/1A POWER SUPPLY /
LEAD ACID BATTERYCHARGER
This is a low cost charger kit for NiCd and
NiMH batteries. It has a connector socket for
connecting to a mains adapter. It is ideal for
charging the batteries of cellular phones,
This module has to be connected to the out- toys, portables, etc... Selectable charging
put of a lead acid battery charger. It may
current. LED charge indication.
then be used to distribute the charging curSpecifications:
rent, from the charger, between two identical Supply Voltage: from 6.5V to 21V depending
lead acid batteries, (of the same voltage).
on the voltage of the battery being charged
More current will flow to the empty battery,
Supply Current: same as charging current
that has a lower voltage, than to the charged Select the Charging Current with a resistor:
This module is a regulated 13.8VDC power
one. This module is useful for motor cara50mA, 100mA, 200mA, 300mA or 400mA
supply with built-in 1.5A current limiting.
vans where one battery powers a television Power supply reverse polarity protected
It can serve as a 12V lead acid battery
or radio while the other must remain charged LED Indicator: Shines while charging
charger that starts charging when the battery
in order to start the motor.
Dimensions: 40 x 60, 30mm height
voltage decreases below 13.8V. The charger
Specifications:
can be left to “trickle” charge 12V lead acid
Input Current: max. 8A continuous
batteries indefinitely, even when the batteries
Output: 2 lead acid batteries of the same
are not used. It can also be used with solar
voltage: 6 to 24V
panels to charge 12V batteries. It stops
charging when the battery voltage reaches
13.8 - 14.2V.
Specifications:
Input Voltage: 16 - 20Vdc
Output Voltage: regulated 13.8 - 14.2Vdc
Output Current: 0 - 1.5A max. depending
on the charging state of the battery
Short circuit and reverse current proof
02.5
NICD AND NIMH BATTERY
CHARGER / DISCHARGER
This is an universal NiCd and NiMH battery
charger kit. It can be used to charge different
NiCd and NiMH batteries at two different
charging rates. In order to ensure that the
battery is fully discharged prior to charging,
and thus has a longer life cycle, an automatic discharger is also included.
Specifications:
Supply Voltage: 15Vdc
Supply Current: 800mA
Charging Currents: 15, 30, 55, 75, 100, 120,
150, 200, 300, 400, 550 and 750mA
Battery Voltages: 1.2, 2.8, 3.6, 4.6, 6, 7.2,
8.4 and 9.6V
Automatic Discharge followed by the Charge
cycle
Charging Time:
Quick Charge: 52 minutes
Normal Charge: 14 hours
BATTERY GUARD 3 TO 15V
permanently connected to a car’s battery terminals due to its low current consumption.
It has three indicator LEDs. The red LED
shines when the battery is under charged.
The green LED shines when the battery is
fully charged. The orange LED shines when
the battery is over charged.
Specifications:
Supply Current: 40mA max.
3 Indicator LEDs
MANUFACTURED BY: SMART KIT
MANUFACTURER CODE: 1034
DUAL UNREGULATED
+40V AND -40V / 3A
POWER SUPPLY
BATTERY GUARD FOR 12V
CAR BATTERY (MODULE)
Many power amplifiers require a dual DC
power supply for their operation. Usually this
consists of some diodes and electrolytic
capacitors to convert an AC voltage to a +/DC voltage. This kit is a dual unregulated
power supply. It consists of a PCB, four onboard 3A/100V diodes and four 2200µF/50V
electrolytic capacitors. It has to be powered
by a center-tapped transformer (not included).
Maximum Transformer Voltage: 28-0-28Vac
Maximum Transformer / Output Current: 3A
This device protects the 12V car battery
against total discharge by disconnecting the
battery load when the battery voltage drops
below 12V+/-0.2V. This device has a relay
output with contact rating of 8A max. The
relay resets (reconnects the load) again
when the battery is recharged to 12.5V.
DUAL UNREGULATED
+40V AND -40V / 10A
POWER SUPPLY
POWER SUPPLIES
UNREGULATED
POWER SUPPLY MODULE
This kit warns one when the battery voltage
becomes too low in order to prevent total
battery discharge. It can be used for battery
voltages between 3 and 15 Volt. A LED indicator will light up whenever the battery voltage falls below the predetermined value.
This threshold voltage value, that is used for
comparing to the actual battery voltage, is
adjustable. There is no need for any additional power supply as this kit is powered by
the batteries that it is testing.
CAR BATTERY CHECKER KIT
This kit is very simple, easy to build and
inexpensive. It is easily mounted inside a
car’s dashboard. It is used to help prevent
unpleasant “surprises” by indicating a 12V
car battery’s state of charge. This kit can be
This is a DC power supply kit designed for
high power audio amplifiers. It is suitable for
circuits requiring a positive and negative rail
voltage of up to 45 Volts per side. This is a
+40V and -40V / 10A dual unregulated
power supply kit. This rectifying power supply requires a suitable center-tapped transformer. Never use a transformer larger than
32-0-32V, as the capacitors voltage rating
will be exceeded. It consists of a PCB, a
This kit makes the ideal unregulated power
10A/560V rectifier diode bridge and four
supply for audio circuits: power amplifiers,
4700µF/50V radial electrolytic filter capacimixer panels, etc. The transformer is not
included. Center tapped, toroidal core, trans- tors.
formers may be used for symmetric output
voltages.
Specifications:
Symmetric Voltage Outputs:
+24Vdc and -24Vdc / 2A max.
Two fuse holders for 20 x 5mm 2A fuses
PCB Dimensions: 60 x 60mm
02.6
POWER SUPPLY MODULE FOR
FB696 AND FB697 AMPLIFIERS
POWER SUPPLIES
FIXED REGULATED
+12V AND -12V 0.5A STABILIZED
POWER SUPPLY
Maximum transformer voltage 18-0-18Vac
POWER SUPPLIES
VARIABLE REGULATED
POWER SUPPLY 1
Many power amplifiers require a dual DC
power supply for their operation. This is a
+40V and -40V / 6A dual unregulated power
supply kit. This rectifying power supply
requires a suitable center-tapped transformer
(not included). It is ideal for the Velleman
audio power amplifiers:
200W Mono/Stereo Amplifier (FB696) and
400W Mono/Stereo Amplifier (FB697)
It consists of a PCB, a 6A/140V rectifier
diode bridge and two 10 000µF/50V radial
electrolytic filter capacitors. It has 2 PCB
mounted 6.3A fuses and 2 power-on indicator LEDs.
Optional two Filter Capacitors: 2 x (AB343)
+40V AND -40V / 6A
POWER SUPPLY
This is a symmetrical stabilized power supply
that has a +12V and -12V supply rail and
common ground. This kit can be used for
many different applications that require a
dual supply voltage. It can also supply
24Vdc if only the +/-12Vdc outputs are used.
Specifications:
Supply Voltage: 12-0-12V (AC or DC)
Output Voltages: +12Vdc, -12Vdc and 0V
Output Current: 500mA max.
Not Included:
Transformer: 12-0-12V, 0.5A (code: QB074)
Two Heatsinks: 2 x (AA787) or 2 x (HB262)
KIT ORDER CODE: PB197
Batteries soon become an expensive way to
power your electronic kit and electronic
games. This is a basic power supply in a box
using two 7805 regulators. Input up to 20V
AC from a transformer or power pack. Two
regulated outputs are available - one fixed at
5V, the other variable. Good introduction to
three terminal regulators.
UNIVERSAL POWER SUPPLY
5 - 14VDC / 1A
UNIVERSAL DUAL POLARITY
STABILIZED POWER SUPPLY
The ideal unregulated power supply for high
power audio amplifiers. Ideal for an amplifier
that requires +40Vdc, -40Vdc and 0V supply
voltages and 3A current per channel. If the
power supply is used for a MONO amplifier,
a 2 x 28V / 3A transformer is required. If you
supply a STEREO amplifier, the transformer
should have an 6A rating, 2 x 28V / 6A.
Suitable transformers: (not included)
28-0-28V / 4A (code: RB012) or
30-0-30V / 5A (code: AA259)
Specifications:
Symmetric Voltage Outputs:
+40Vdc / -40Vdc with 2 x 28V transformer
Current Rating: 6A max. per supply rail
Two 20 x 5mm fuse holders
KIT ORDER CODE: SB023
This is an adjustable power supply kit that is
suitable for electronic circuits that require a
This kit contains the parts to build a dual
regulated voltage between 5 and 12Vdc, and
polarity stabilized power supply, but it
no more than 1A. It has thermal overload
excludes the required 2 voltage regulators
protection.
and centre tapped transformer. Both the pos- Specifications:
itive regulator, a 78xx series, regulator and
the negative, a 79xx series, has to be 3 ter- Supply Current: 1A
minal TO-220 packages. These regulators
Maximum Power Dissipation: 7W
can handle maximum 1A load current. The
Output Voltage Range: 5 - 14Vdc (regulated)
positive and negative regulators do not have Output Current: max. 1A
to be matched. You can for example:
Use a +5V (7805) and -8V (7908)
regulator pair. The transformer must be
8-0-8V / 1A for 1A max. load current.
Use the following pos. / neg. regulators:
(there are no regulators included)
POWER SUPPLY 0 TO 12V 0.8A
+ 7805 (HB107) / - 7905 (HB115)
+ 7806 (HB265) / - 7906 (HB269)
+ 7808 (HB108) / - 7908 (HB116)
+ 7809 (HB298) / - 7909 (GB578)
+ 7812 (HB109) / - 7912 (HB117)
+ 7815 (HB110) / - 7915 (HB118)
and following centre tapped transformers:
(there are no transformers included)
6-0-6V / 1A (QB072)
8-0-8V / 1A (QB073)
12-0-12V / 1A (EB925)
This is an adjustable electronic power supply
15-0-15V / 1A (AA731)
02.7
kit. It is simple to construct and ideal for
powering experimental circuits.
Specifications:
Supply Voltage: 15Vac or 15Vdc
Adjustable Output Voltage: 0 to 12Vdc
Output Current: 0 - 800mA max.
Not Included:
transformer (QB073)
heat sink: (AB008) or larger
POSITIVE ADJUSTABLE
POWER SUPPLY
This is an positive, adjustable, regulated
power supply kit. It is compact, and easy to
build. The voltage is adjusted with a multiturn trimpot. It is ideal for powering any
1A POWER SUPPLY KIT
application requiring a positive DC supply
voltage at current levels up to 1.5A.
A dual-rail power supply can be built by
using this kit together with the kit: “Negative
Adjustable Power Supply” (EB636).
Specifications:
Supply Voltage: (AC or DC supply voltage)
AC Supply Voltage: 0 to 24Vac or
DC Supply Voltage: 0 to 37Vdc
Note: The magnitude of the supply voltage
must be at least 3V more than the magnitude of the kit’s output voltage.
Adjustable Output Voltage: 1.5 to 35Vdc
Output Current: 1.5A maximum
This is a compact, adjustable, regulated volt- Dimensions: 37 x 84mm, 45mm height
Not Included:
age power supply kit. The output voltage is
Transformer: 12-0-12V, 1.5A (code AA753)
adjusted with a pre-set potentiometer. The
LM317 regulator is used. Please note that a
heatsink is required (AB008) or larger.
Specifications:
Maximum Supply Voltage: 39Vdc or 28Vac
NEGATIVE ADJUSTABLE
Output Voltage Range: 1.5 - 35Vdc
POWER SUPPLY
Output Current: 1.5A max.
POWER SUPPLY 1.2V TO 30V / 2A
This is a regulated, adjustable voltage power
supply kit. It makes use of a voltage regulator IC.
Specifications:
Supply Current: 2A
Adjustable Output Voltage: 1.2 - 30Vdc
(2A maximum using a large heatsink and
the output voltage must exceed 15Vdc)
Not Included:
Transformer: 24Vac, 2A (AC661)
Heatsink: (AB266) or (AB267)
3 TO 30 VOLT 2.5 A
ADJUSTABLE POWER SUPPLY
1.5 TO 30V / 1.5A
ADJUSTABLE POWER SUPPLY
This is a negative, adjustable, regulated
power supply kit. It is compact, and easy to
build. The voltage is adjusted with a multiturn trimpot. It is ideal for powering any
application requiring a negative DC supply
voltage at current levels up to 1.5A.
A dual-rail power supply can be built by
using this kit together with the kit: “Positive
Adjustable Power Supply” (EB635).
Specifications:
Supply Voltage: (AC or DC supply voltage)
AC Supply Voltage: 0 to 24Vac or
This is a basic adjustable voltage power supDC Supply Voltage: 0 to -37Vdc
ply using the popular three pin regulator,
Note: The magnitude of the supply voltage
LM317T. You can select any voltage
between 1.5V and 30V using a potentiome- must be at least 3V more than the magnitude of the kit’s output voltage.
ter. The LM317T is rated at 1.5A so you
must use a larger heat sink when drawing
Adjustable Output Voltage: -1.5 to -35Vdc
high currents. Unregulated AC or DC input
via terminal block or power jack.
Suitable transformer for upto 20V output is
Not Included:
Code: AA579 or AA750.
Transformer: 12-0-12V, 1.5A (code AA753)
02.8
This is a variable, stabilized, voltage power
supply for electronics workshop use. It is
very reliable and therefore suitable for professional or amateur applications. No workshop should be without one! It is short circuit
protected. It uses the well known voltage
regulator IC LM723 and one 2N3055 power
transistor. A large heatsink is supplied with
this kit.
Specifications:
Supply Current: 3A
Adjustable Output Voltage: 3 - 30Vdc
Short-Circuit Protected
Dimensions:
PCB: 56 x 111mm, 45mm height
Heatsink: 65 x 121 x 38mm
Not Included:
Transformer: 24Vac, 3A (Code: PB196).
3 TO 30 V / 3A POWER SUPPLY
POWER SUPPLY 1.2 TO 18V / 8A
INVERTERS AND
CONVERTERS DC TO DC
This kit is meant to be used as an auxiliary
or permanent power supply for electronic circuits that require a stabilised DC voltage
between 3 and 30V provided that the current
consumption does not exceed 3A. The voltage is adjusted with an on-board trimmer
potentiometer. It may also be used as an
adjustable power supply unit by replacing the
trimmer with a panel mountable potentiometer. The transformer not supplied. The heat
sink is supplied with this kit.
Specifications:
Supply Voltage: 9 to 30Vac (depending on
the desired output voltage)
Required transformer for up to 30Vdc output:
230V to 15-0-15V 2x5.33A 160VA (AB374)
Adjustable Output Voltage: 3 - 30Vdc
Maximum Output Current: 3A
Output Voltage Ripple : 0.5mV
Short-circuit protected
Overload protected
Optional: 10k Ohm potentiometer (HB167)
POWER SUPPLY 1.2 TO 30V / 5A
VOLTAGE TRANSFORMER
INPUT: 6 TO 12V,
OUTPUT: 12 TO 30V
This kit is an adjustable, high-power, regulated, voltage supply. It works with 5 adjustable
voltage regulators, of the LM317 type, that
are connected in parallel. Four 25A diodes
are supplied that can be used for rectifying
an AC-supply voltages to DC-voltage.
Specifications:
Supply Current: 10A
Adjustable Output Voltage: 1.2 - 18Vdc
Output Current: 8A maximum
Not Included:
Transformer: 9-0-9V, 2 x 8.8A (AB295)
Heatsink: 15 x 10 x 2 cm or larger (AB266)
Mica Insulators for TO220: 5 x (DB312)
Insulating Bushes for TO220: 5 x (DB315)
Nuts, Bolts, Washers
Heatsinks for Rectifier Diodes: 2 x (AC824)
Optional (instead of using four 25A diodes):
Rectifier Diode Bridge: 25A, 400V (MB085)
0 - 30V / 0 - 10A POWER SUPPLY
This laboratory power supply kit is no doubt
a valuable tool for both the professional and
amateur electronics engineer. It has a digital
voltmeter and a digital ampere-meter with
This is a stabilized, 1.2 to 30V variable voltred LED, 7-segment displays on the front
age, 5A, power supply kit. It makes use of
panel. This power supply is capable of operthe LM337 adjustable negative voltage reguating at full load for extended periods of time
lator and a high-power NPN bipolar junction
due to the integrated fan. The housing,
bypass-transistor, like the 2N3055, to boost
knobs, transformers and digital displays are
the output current to 5A maximum.
supplied with this kit.
Specifications:
Specifications:
Supply Voltage: (for 30 Vdc max. output)
24 Vac transformer or
Power Consumption: 300Watt
35Vdc
Output Voltage Range:
Supply Current: 5A
continuously adjustable from 0 to 30Vdc
Output Voltage Range: 1.2 - 30 Vdc / 5A
Output Current Range:
Not Included:
current limit is adjustable from 0 to 10A
24Vac / 5A transformer (Code: AA752)
8A continuously, but only 10A peaking
Heatsink (AB267)
LED Indication: shines during a current limit
Digital Voltmeter: 3 digit, 0.1V accurate
Digital Ampere-meter: 3 digit, 0.01A accurate
Maximum Voltage Ripple: 0.5mVrms
Fine Tuning Range: over 1V
Short-circuit protection
Dimensions:
Width: 330mm
Height: 90mm
Depth: 215mm
Hint: You should ground the front panel if the
displays are unstable.
02.9
This kit makes a DC to DC Converter, that is
also called a voltage step-up power supply. It
is ideal for powering appliances that require
a higher operating voltage than what is available. Example: Use this step-up power supply to power 12Vdc amplifiers, CB-radios
from a 6V-battery. The output voltage can be
limited electronically. The step-up transformer is supplied with this kit.
Specifications:
Input Voltage Range: 6 - 12Vdc
Input Current: 5A maximum
Output Voltage:
for 6Vdc input: 12 - 13.5Vdc output
for 12Vdc input: 15 - 30Vdc output
Output Current: 1A maximum
Dimensions:
PCB unit: 55 x 55mm, 35mm height
Transformer: 38 x 63mm, 33mm height
Not Included:
Insert a 5A fuse, (AA951), between the stepup power supply and its input voltage.
Insert a 2A fuse, (AA947), at the output of
the step-up power supply.
In-line Fuse Holders: 2 x (FB471)
Heatsink: 8 x 8 x 2cm or larger (AB267)
INVERTERS AND
CONVERTERS DC TO AC
FLUORESCENCE KIT 11-16 VDC
8 - 40WATT
This circuit is useful for the country and
camping. It is powered from a car battery
and can light any fluorescent lamp in 8-40
Watt size. The special design of the circuit
ensures the maximum illumination without
inserting any spikes in the mains.
Power supply: 11 to 16 VDC / 1.3A
Frequency: 58 kHz
MANUFACTURER CODE: 1069A
FLUORESCENT LAMP
VOLTAGE CONVERTER 12VDC
INVERTER 12VDC TO 220VAC /
50 HZ 100 WATT
9-0-9V to 220V / 160VA (AB295)
CIRCUIT PROTECTION
LOUDSPEAKER PROTECTION UNIT
9-15VDC
Fluorescent lamps can be powered with this
voltage converter module that requires only
12Vdc, like a car battery. It is ideal for camping, gardenhouses etc. It operates at high
frequency and low current consumption. It is
energy efficient even at full brightness.
Lamps may be connected to the module
without any series devices like chokes or
starters!
Technical data:
Supply Voltage: 12 - 13.8Vdc
Supply Current: 0.7 - 1.5A (variable)
Output Voltage: with no load > 600V
Operating Frequency: 10 - 30 kHz
Output Power: 8 - 18 Watt
Dimensions: 70 x 60 x 26 mm
(without brackets + cooling angle)
FLUORESCENT LAMP
VOLTAGE TRANSFORMER
Fluorescent lamp voltage transformer
INVERTER 12V IN
UP TO 220VAC 70WATT
Voltage converter for 12V car-battery up to
220V alternating voltage, approx. 50 Hz
(adjustable). Also necessary: 2 cooling elements approx. 10 x 15 x 4 cm (or similar)
and one power transformer 220V / 2 x 10V,
approx. 20 to 120VA (transformer power
should be twice as much as the desired output power).
A useful project for those who like camping
and caravaning but not leaving behind modern facilities that require a mains power supply. This circuit will convert 12 VDC to 220
VAC and can supply loads of up to 150
Watts. The kit includes the heatsinks for the
power transistors (transformer not included).
Suitable transformer SB041.
Power supply: 12VDC
Output voltage: 220VAC square wave
Output frequency: 50 Hz
KIT ORDER CODE: QB064
This kit is an ideal accessory for your audio
system. It works with any amplifier from 1 to
100 Watts and protects your speakers from
peak signals and you from unpleasant and
expensive surprises! It completely eliminates
the possibility of loud speaker burning due to
overloading.
Specifications:
Supply Voltage: 9-15Vdc
Supply Current: 2mA
Max. speaker current required by kit: 50mA
Max. input power to speaker: 100W
INVERTER 12VDC TO 220VAC /
50 HZ / 160 WATT
SPEAKER PROTECTION MODULE
Faulty power amplifier output stages often
result in speaker voice coil burn out. This
simple but efficient device prevents the loss
of your expensive speaker. It also includes
an anti-plop function. This device only proThis inverter kit is ideal for use in cars,
tects one speaker output. The power amplifitrucks, boats, caravans or other places
where only 12 volt battery power is available. er’s output is connected to the 2 input spade
Output of 220Vac for powering audio equip- connectors and the speaker is connected to
ment, video recorders, television, computer, the 2, spring loaded, lever connectors.
Specifications:
electric shaver, etc.
It will automatically shut-off when the voltage Supply Voltage: 12Vdc
of the 12V battery (supply) dropps below 9V. Supply Current: 50mA
DC Changeover Voltage: 2Vdc
The heatsink is supplied.
Please Note: This inverter is not suitable for Minimum amplifier operating voltage: 10Vdc
electric motors and requires a step-up trans- Maximum amplifier operating voltage: 90Vdc
Maximum current handling: 10Amps
former (not included).
Maximum Audio Power: 300Wrms
Specifications:
MODULE ORDER CODE: AA345
Supply Current: (from 12V battery)
quiescent current: 0.5A
FOR ONE CHANNEL
required for full load: 15A
Output Voltage: 220Vac
Monitors:
Output Voltage is controlled
Low Battery Voltage indication / protection
Output Frequency: 50Hz (crystal oscillator)
Output Power: 160Watt max.
Efficiency: 90%
Noise Suppress Output Filter built in
FET Power Transistors are used
Dimensions:
PCB: 82 x 110mm
Heatsink (supplied): 75 x 173 x 28mm
Burn out of a power amplifier’s output stage
Not Included:
02.10
nearly always results in a dangerous direct
current to the loudspeaker’s terminals. In
turn, this results in loudspeaker burn out.
This kit is a speaker protection device that
does not require an additional power supply.
It is simply connected between the amplifier’s speaker output terminals and the speaker in the speaker cabinet. This device disconnects the speaker as soon as a direct
current flows through the speaker cable.
Ideally suited for use in the car.
Specifications:
Does not require an external power supply
Maximum Input Voltage: 90Vdc
Maximum Current: 10A
Minimum Safety Voltage: 10Vdc
FOR TWO CHANNELS
This kit is a stereo speaker protection
device. It is connected between the amplifier’s speaker output terminals and the speakers. It prevents switch-on clicks by delaying
the speakers connections directly after
switch-on. It also prevents DC components
on the speakers. It disconnects the speaker
as soon as a direct current flows through the
speaker cable.
Specifications:
Power Supply: 220Vac
Indicator-LED:
for occuring switch-on delay and
Error: DC on amplifier’s speaker outputs
Switch-delay: ±6 seconds
Maximum Input Voltage: 200Vpp
Maximum Current per channel: 10A
Minimum Safety Voltage: ±1V
through jumper)
signal frequency: approximately 1kHz (fixed)
output amplitude: adjustable from 0 to
100mVrms (LEVEL potentiometer)
Specifications:
Power Supply: 9V battery (not included)
MANUFACTURER CODE: MK105
SIGNAL GENERATORS
VARIABLE FREQUENCY
20HZ-20KHZ
FUNCTION GENERATOR
SIGNAL-INJECTOR
Universal square-wave sound generator with
approximately 1000 Hz basic frequency and
a great number of harmonic waves which
lead up to VHF-range. The signal can be listened through a highly ohmic earphone or
could be amplified for loudspeakers through
an amplifier. Ideal as repair equipment for
radios and amplifiers, in order to feed a
sound signal at various stages of the defect
object.
Operating voltage: 6 to 12VDC
3 KHZ MINI SIGNAL HORN 6 TO 12V
An audio frequency function generator capable of covering the frequency range between
20Hz and 20KHz. It produces sinusoidal, triangular (sawtooth) and square waveforms. It
can be used very well for accurate adjustments in the laboratory. It has separate level
controls for each waveform shape and it can
be easily set to give exactly the same signal
level for each waveform at the same time.
Operating voltage: 24VAC
Output voltage: 4V RMS (10V pp) Sine and
Triangular
10V RMS (16V pp) Square wave
Output inpedance: 600 Ohm
PCB size: 120x65mm
20MHZ FUNCTION GENERATOR
With a mini-loudspeaker (approx. 14 x 11
mm) this device emits a tone of approximately 3000 Hz. Ideal for fitting it into miniature models, as signal unit, morse sound
generator, etc. Of course, it is possible to
connect a greater loudspeaker.
OSCILLATOR BUILDING BLOCKS
AUDIO SIGNAL
GENERATORS
FIXED FREQUENCY
1 KHZ SIGNAL GENERATOR
A learning module. Build and experiment
with astable, monostable and SR flip-flop
multivibrators on the one PCB. 6 LED`s &
9V battery-powered. See and understand
exactly how each works. Good introduction
to electronics.
Features:
The kits output signal: sine wave, triangle,
square wave and integrator (selectable
02.11
This is a compact function generator kit built
around the MAX038 from Maxim Integrated
Products. It provides sine, square and triangle waveforms up to 20 MHz over 3 ranges.
It has fine and course frequency adjustment
controls. Output amplitude is adjustable. A
TTL output is also provided. BNC output
connectors are used. An enclosure with silkscreened front and rear panels is supplied.
Specifications:
Power Supply: 7-12V transformer (QB071)
Frequency Range:
Sine:
10Hz - 20MHz
Square: 10Hz - 10MHz
Triangle: 10Hz - 10MHz
Sinewave Distortion: less than 2%
Squarewave Rise/Fall Time: less than 10ns
Output Voltage Range: 0 - 2 Vpp
TTL Output: between 0 and 2 - 5V
synchronised with analogue zero crossing
Output Impedance: 50 Ohm
Dimensions of Enclosure: 140x35x110mm
OP-AMP FUNCTION GENERATOR
6 - 6000 HZ 9VDC
Good value-for money & simple circuit to
generate square, (pseudo) sine and triangle
waveforms in the 6 - 6000 Hz audio range. It
uses a quad op-amp LM348 and passive
components. The sine wave is made by
wave shaping. It requires a 9V battery like
(EB160).
METRONOME
UNIVERSAL CRYSTAL TIMEBASE
MARINE DIESEL MOTOR
In many clocks and circuits mains frequency
is used as the time base, because of its high
accuracy. If these devices are to be supplied
by batteries (e.g. in the event of power failure) another time base should be provided to
prevent the clock from stopping. This kit provides the standard 50Hz mains frequency,
100Hz (for devices operating with hundreds
of seconds) or 400Hz signals (selectable).
Specifications:
Output Frequency: 50, 100 or 400Hz (adaptable for 1Hz)
Supply Voltage: 5 - 25VDC
Supply Current: 5mA
SOUND IMITATIONS
MACHINES AND
MECHANICAL SOUNDS
This kit includes a miniature speaker and a
LED-beat-indicator. Adjustable volume and
beats / minute by using potentiometers. On /
off switch on board.
Specifications:
SQUARE WAVE OSCILLATOR
5 - 18VDC
lowing are independently adjustable: exhaust
system noise, rumbling of the valves, running velocity. The running velocity can be
adjusted continuously to sound like an electro traction motor.
For loudspeaker: 4 to 8 Ohm 7 to 10 Watt
Operating Voltage: 7.5 to 12 Volt
Dimensions: 35x70mm, 30mm height
The kit produces the very real noise of a running marine diesel engine. The diesel sound
and the running speed are adjustable.
Operating Voltage: 12VDC
Loudspeaker: 4 to 8 Ohm
FOUR TRAIN SOUNDS (COB PCB)
WITH MOTHERBOARD 2.4 - 6VDC
ROBOT VOICE 9 TO 12 VDC
The kit distorts the introduced speech so that
it sounds like the voice of a robot. Adjustable
effects. The device should be connected
between the microphone and amplifier (or
tape recorder).
SUPER DIESEL SHIP MOTOR
A square wave oscillator is one of those
pieces of equipment that has many uses in
the workshop yet few hobbyists have. This
kit, based on the popular 555 timer IC, generates 6 preset frequencies for 1Hz to
100kHz. It has a wide operating voltage rand
and even provides visual indication of the
output.
PCB size: 78x50mm (Enclosure supplied)
Supply voltage: 5 - 18VDC
This kit produces exceptionally original, rumbling sound of a Super Diesel motor. The fol-
02.12
The kit imitates four train sounds: whistleblowing, chugging, level crossing bell and
the clackety clack of a train crossing a
bridge. Just 4 switches and 4 components to
add. Motherboard supplied to fit COB PCB
and components into.
Dimensions:
PCB assembly: 24x33mm, 17mm height
Speaker: 80mm diameter, 25mm height
Supply voltage: 2.4 - 6VDC (battery holder
included)
MANUFACTURER CODE: SG1MKIT
STEAMER NOISE WITH
STEAM WHISTLE AND BELL
SOUND IMITATIONS
ANIMAL AND
INSECT SOUNDS
ELECTRONIC CRICKET
special-voice-synthesizer-IC. The sound is
adjustable, i.e. from little yelper to big
naughty dog.
Operating voltage 9V
VARIOUS SOUNDS
The kit produces very life-like the wheezing
and hissing of a steamer. Furthermore a
steam whistle and steam bell may resound.
The noises can be released individually by
means of a switch. The sound and speed of
the noises are ajustable. Besides the single
noises, it is also possible to play a program
including all noises of a train arriving at the
station: The train approaches, becomes
louder, whistles and tinkles, enters the station vociferously, slows down and stops with
a loud hissing.
Operating voltage: 4.5 to 6 Volt
Loudspeaker connection: 8 Ohm, 1 Watt
STEAM ENGINE SOUND
GENERATOR WITH WHISTLE
CELLULAR PHONE SOUNDS
(COB PCB) WITH MOTHERBOARD
2.5 - 5VDC
The cellular phone sounds kit imitates real
phone tones like the engaged and ringing
sounds, in total eight different electronic
This kit can be used for fun and also to sim- sounds are produced. The kit is ideal for use
ulate cricket sounds during a hot summer
in childrens toys.
night. It automatically comes on when it gets Motherboard supplied to fit COB PCB and
dark. This Cricket’s light sensitivity is also
components into.
adjustable. The repetition rate (time between COB PCB: 16x29mm.
two cricket sounds) and tone of the cricket
Supply voltage: 2.5 - 5VDC (battery holder
sounds are adjustable.
included)
Specifications:
Supply Current: 5mA
MANUFACTURER CODE: SG02M
SOUND EFFECTS GENERATOR
9VDC
4 ANIMAL SOUNDS:
HEN, CAT, COW, DOG
This kit generates the sound of a vintage
steam engine. The “speed” and volume is
adjustable. It is great for model railroads,
radio plays, stage and as a gadget. With
“steam whistle”-push button.
Specifications:
This Chip-on-Board PCB contains four animal sounds. It requires a power supply 2.4V
to 6V. The standby current is less than 1 uA.
Operating current is 0.17 to 0.23 mA.
There are four animal sounds:
Switch 1, cat
Switch 2, hen
Switch 3, cow
Switch 4, dog
An easy to build project that will create many
interesting sound effects. It can produce
many different sounds from bird chirps to
sirens. The sound combinations which are
produced are practically infinite! The circuit
can be operated from a small 9VDC battery.
Power supply: 9VDC / 20mA
Output power: 0.05 Watt.
SOUND GENERATOR
ELECTRONIC DOG BARKING
9 VOLT
Produces almost realistically and loudly the
barking of a dog. For one loudspeaker 8
ohms, > 1 W. The barking is stored on a
02.13
The ideal device for DJ's, jingles for radio
stations or just to attract attention. With one
output for direct connection to a speaker and
one line output for connecting to a mixer
panel or amplifier. The following effects may
be generated directly by means of a push
button :
European siren
US siren
Phasor gun
Machine gun
Racing car with motor howl
Screeching of car tires on a curve
Explosion
Mortar fire followed by explosion
“Wild charge tune”, “Snake charmers tune”
Specifications:
Supply Voltage: 8 - 10Vdc or 9V battery (not
included)
Line Output: 1Vrms
Speaker Output: 1W
SIRENS, ALARM BELLS,
DISTRESS AND
DANGER SOUNDS
POLICE SIREN
Enter the world of amazing electronic
sounds and noises. Create or imitate sirens
of all kinds by adjusting 3 trimmers. Powerful
sound with a 2W amplifier on the PCB.
Specifications:
power supply : 8 - 14VDC / 1A
dimensions : 79 x 57mm
MARTIN SIREN GERMAN POLICE
SIREN 12V
An especially high-powered siren with the
tune similar to the german police siren:
tatü...tatü...tatü.
Loudspeaker connection: 8 to 16 Ohm
3 SIRENS & MACHINE GUN
FBI SIREN 12V 15W
9V SIREN
Audible electronic siren with a tone of the
american police siren.
A surprisingly loud siren for such a simple
Operating voltage: 12V.
circuit. Uses voltage controlled oscillator. 1/2 Loudspeaker: 8 to 32 Ohm
Watt, 8 ohm speaker supplied. 9V operation. Power: 3 to 15 Watt, depending on the loudIdeal to attach to an alarm system which
speaker.
requires a siren sounder module.
KOJAK-SIREN 12V 15W
The classic noises little children love! Three
sirens- ambulance, police and fire enginesplus a machine gun. All with 2 flashing
LEDs. COB PCB 16mm x 29mm with motherboard.
8 DIFFERENT SOUNDS:
SIREN, BOMB & RIFLE SOUNDS
PIEZO ALARM SIREN 110DB
Especially audible siren, in rapid sequences
rising up and reducing sound (like the one
used in Kojak police cars). Due to the high
Do you want to know what noise with a
110dB sound pressure sounds like? This kit operating frequency the sound will become
extremely aggressive and widely audible!
generates 108 to 111dB measured at 1
meter distance using a sound level meter. An For loudspeakers: 8 to 32 Ohm
enclosure (resonant cavity) with 2 preglued
piezo sounders, with soldered red/black
leads, is also supplied. The oscillating freMANUFACTURER CODE: B091
quency is swept about the resonant frequency of the piezo sounders for maximum loudness.
Specifications:
Supply Voltage: 5 - 15VDC
Supply Current: 400 - 500mA
Sound Pressure: 108 - 111dB
Dimensions : 32 x 55 x 114mm
02.14
AB683
This kit can generate 8 different sounds that
include siren, bomb and rifle sounds. It
makes use of a sound generator CMOS LSI
chip. This preprogrammed chip is bonded
onto a PCB and is called a COB (chip-onboard). The COB, loudspeaker, battery holder and 8 push-button switches are supplied,
one for each sound. Once a button is
pressed, the sound that is associated with
that specific button starts to play for a short
while and then stops automatically.
Specifications:
Supply Voltage: 2.5 - 5Vdc
the supplied battery holder takes two 1.5V
size AA Cells (not included)
Supply Current:
Quiescent Current in stand-by: 5µA
Operating Current (no speaker): 0.6mA
Number of Sounds: 8
Speaker: 8 Ohm / 0.5 Watt min.
Dimensions:
Speaker: 77mm diameter, 25mm height
COB: 16 x 29mm
Motherboard: 23 x 34mm
Battery Holder: 17 x 30 x 65mm
MANUFACTURER CODE: SG12
DESTROYER SIREN
DOOR SOUNDERS,
CHIMES AND GONGS
16 DOOR CHIMES
SIREN SOUND GENERATOR
Warship siren ’Clear decks for action’. In
rapid intervals sounds a shortly swelling
tone: Uiiit... Uiiit...
Power: 3 to 15 W, depending on the operating voltage
Operating Voltage: 6 to 12 Volt
Loudspeaker: 8 Ohm
SIREN MAX. 1W, 3 TO 9VDC
AIR-RAID SIREN
This kit generates 4 different sounds : police
siren, fire brigade, emergency vehicle and
laser gun. The sound pitch is adjustable (pot.
RV1). On/off switch and PCB speaker are
included.
Specifications:
Loud siren with increasing and decreasing
sound. Perfect for model making! Complete
SHIP SIREN
with loudspeaker!
SPACE SIREN 12V, 15W
The kit produces a loud, deep hooter tone
similar to those of the big vessels. Also suitable for alarm-systems, door bells etc.
Loudspeaker socket: 8 Ohm, max. 5W
FOG HORN 5W
Extremely audible, nerve-shattering siren
sound with the attack alarm known from the
movie ’Star Wars’.
Operating Voltage: 12 Volt 0.3 to1.2 A
Loudspeaker: 8 to 32 Ohm.
Power: 3 to 15 Watt, depending on the loudspeaker
The kit generates a deep, noisy sound similar to the fog-horns of ships. Operating voltage: 4.5 to 12 Volts. Power: max. 5W
depending on the voltage. For 8 ohms loudspeakers.
Sixteen door chime tunes. Tunes cycle
through the sixteen tunes with each keypress. LED fluctuates according to the sound
level. Designed for high quality melody products. Supplied with motherboard.
MULTI-TONE CHIME
Electronic tones can be generated simply
and cheaply using the device. This kit is primarily intended for use as a replacement for
the traditional mechanical doorbell. Of
course, it can also be used for many other
types of applications. The number of tones
may be selected up to a maximum of three,
each of which is output one after the other.
This can be used to help locate the place
being called. Volume and tone can also be
set. The existing bell transformer can be
used as a power supply.
Specifications:
adjustable tone and volume control
1, 2 or 3 tones selectable
loudspeaker output : 0.3W / 8ohm
power supply : 6 to 9VAC / 0.2A or 4.5V battery (3 x 1.5V AA batteries (not incl.)
idle current : less than 10µA
dimensions : 53 x 59mm
3 TONE GONG 9 VOLT
Melodious, electronic 3-tone Gong with the
Siemens IC SAB 600. Ideal as doorgong,
identification signal, announcement of news
etc. Operating voltage: 9 V. For loudspeaker
8 Ohm. Released through a pushbutton or
with a voltage 6 to 12V coming from the
doorbell system (DC or AC voltage).
02.15
DING/DONG DOOR CHIME
(COB PCB) WITH MOTHERBOARD
AND SPEAKER 3 VDC
TWO MELODY TRANSISTORS KIT
(SPEAKER NOT INCLUDED) 3 VDC
The chip on board PCB contains the traditional ding dong door chime. All the components and switches are supplied. Extra
capacitors are supplied so you may experiment with the ’ding’ and the ’dong’ duration’s. Motherboard supplied to fit COB PCB
and components into. The speaker is also
included.
Power supply: 3VDC (battery holder included)
Two melody transistors in a TO92 package.
All you have to do is connect 3VDC and a
speaker. The tune will play continuously as
long as the power is connected. The kit is
suitable to use in birthday cards, childrens
toys etc. Speaker not included, suitable
speaker: PB244.
Supply: 3 VDC (2 x battery holders included)
MANUFACTURER CODE: SG6KIT
TWO COMPLETE MELODY UNITS
MUSIC, MELODIES,
TUNES AND SONGS
Operating voltage: 3V
ELECTRONIC MELODY:
COO COO WALTZ
This kit plays the famous Waltz melody in an
expressive high-quality sound. The melody
will start through a push-button and stop
automatically. Loudspeaker included.
MICROPHONE
PREAMPLIFIERS
MICROPHONE PREAMPLIFIER
6-20V
6 MELODY GENERATOR
Every time after pressing the key, the
melody generator plays one of the 12 stored
melodies in succession. The melodies
always play for about 15 to 25 seconds.
Use: doorbell, break signal, etc
Operating voltage: 3 to4.5VDC
Not Included:
MUSIC BOX ENGINE 3 VDC
AB685
These are two identical melody generator
modules. Each continuously rotates through
three Christmas melodies only while the onboard switch is closed. Each has adhesive
backing and is ideal for mounting inside a
Christmas card so that it sounds when it is
opened. There is one preprogrammed
CMOS LSI chip and one 1.5V button-cell
bonded onto each PCB. The chip has a builtin oscillator and directly drives a piezo transducer (speaker). This kit can easily be modified to be used as a building block for door
bells, alarms etc.
Specifications:
3 Christmas Tunes: Jingle Bells and 2 others
Dimensions: 29 x 51mm, 5.5mm height
MODULE ORDER CODE: AB685
MANUFACTURER CODE: SG14
The input impedance is adjustable for any
microphone from 4 Ohm up to 100 k Ohm.
Input: approx. 2 to 40mV
Output: max. 1.8 Vpp.
Amplification is adjustable.
Frequency: approx. 20 to 40.000 Hz
MICROPHONE PREAMPLIFIER
6-12V
ELECTRONIC MELODY:
IT´S A SMALL WORLD
A preamplifier to use with an electret or other
microphone to boost the signal before feeding into an amplifier. It has a gain greater
This kit is the electronic equivalent of a
than 40dB which is more than enough for
mechanical music box. It has a range of
most applications. The kit is simple and easy
tunes that are contained in an IC. Tunes are
to build. (include electret microphone)
started by light falling on an LDR. The kit
Power supply: 6 to 12VDC
can be placed anywhere that you want a
Current drain at 12V: 3mA
tune to play when light falls on it for example
Current drain at 9V: 2mA
a jewely box, toy chest, cupboard etc. Two
PCB size: 30x43mm
music IC’s provided.
This kit plays the famous Waltz melody in an
Power supply: 3VDC (battery holder includMANUFACTURED BY: DIY
expressive high-quality sound. The melody
ed)
will start through a push-button and stop
automatically. Loudspeaker included.
02.16
supply voltage.
Specifications:
Frequency Range: 10 Hz - 100k Hz
Input Signal Voltage Range: 2 - 50mV
Output Voltage Range: 200mV - 1V
Voltage Gain versus Supply Voltage:
65 using 9Vdc
80 using 12Vdc
100 using 24Vdc
This highly sensitive microphone is able to
receive after being fitted in a half-ball-shaped
reflector (divided play ball), noises and
UNIVERSAL, MONO, SUPER WIDE
words from more than some hundred
BAND PRE-AMPLIFIER
meters. Ideal for observing animals, for
detectives etc.
Technical data:
Operating voltage: 9VDC
Microphone: highly sensitive electret microphone
Output impedance: 8 Ohm for headphone or
loudspeaker
PCB size: 55x44mm
A 2-step preamplifier for 12 to 30V operating
voltage. Input: 2 to 20mV, output: 200mV to
2V. Application: pre-amplifier for high-power
amplifier, headphones-amplifier, etc.
SUPER STEREO MICROPHONES
PARABOLIC-MICROPHONE 9VDC
UNIVERSAL MONO PRE-AMPLIFIER
Bandwidth)
max. Input Voltage: 50mVrms
Adjustable Voltage Gain: 40dB max.
Output Impedance: 1Kohm
Power Supply: 10 - 30Vdc
Supply Current: 5mA
STEREO RIAA PRE-AMPLIFIER
This kit is a RIAA stereo pre-amplifier for md
(record player) pick-ups. Low noise.
Specifications:
Supply Voltage: 10 - 30Vdc (regulated)
Supply Current: 5mA
Gain (at 1kHz): 35dB
Input Signal Range: 5 - 10mV
Input Impedance: 47kOhm
GUITAR PREAMPLIFIER WITH
TONE CONTROL 9-12V
This stereo audio microphone amplifier
boosts sound 50 times. It is great for the
hearing-impaired (e.g. when watching TV),
as a gadget, science projects, ... With volume control and on/off switch.
Specifications:
Power Supply: 3 x 1.5V AA batteries (not
included)
VARIOUS AUDIO
PREAMPLIFIERS
UNIVERSAL PRE-AMPLIFIER
MODULE 9 - 24VDC
This kit has been developed for use as a
pre-module for a number of audio applications where there is insufficient input signal
amplitude. It may be used as a microphone
pre-amplifier or for signal level correction.
Specifications:
Output Impedance: 1kOhm
Adjustable Signal Gain: max. 40dB
Frequency Range: 20Hz to 20kHz (-3dB
Bandwidth)
max. Input Signal Amplitude: 40mV
This is a preamplifier with very good specifications that will satisfy even the most
demanding users. It has BASS and TREBLE
controls and can be connected to any amplifier. The circuit is small enough to be placed
inside the guitar. It uses the well know IC TL082.
Max. current: 50mA
PCB size: 55x52mm
GUITAR HEADPHONE
AND PREAMPLIFIER
UNIVERSAL STEREO
PRE-AMPLIFIER
This mono pre-amplifier module is used to
amplify weak audio input signals. It is simply
connected between the output of a weak signal source, like a microphone, and the input
of a power amplifier. The voltage gain, from
input to output, depends on the module’s
This kit is a universal, low-noise stereo preamplifier.
Specifications:
Frequency Range: 40Hz - 30kHz (-3dB
02.17
An electric guitar cannot be connected to
just any amplifier or audio installation. This
pre-amplifier has been designed for this purpose and provides you with a headphone
output, allowing you to practice without disturbing others. Moreover, it is fitted with a
special device for tone adjustment, allowing
anyone to create their personal sound.
Specifications:
Adjustable Tone
Adjustable Input Sensitivity
Low Noise
Headphones Output Power: max. 2 x 50mW
/ 32ohm
Metal Enclosure included
VALVE CONTROL AMPLIFIER
HIGH-END CONTROL AMPLIFIER
DIGITALLY CONTROLLED
AUDIO PREAMPLIFIER
This is an audio control amplifier kit that
makes use of valves. Connect up to four signal sources to this amplifier’s stereo RCA
inputs: Auxiliary, CD, Tuner and A/V audio
inputs. One audio signal source is selected
A pre-amplifier is an indispensable device for at a time. This signal is split in 2: one signal
controlling a power amplifier. This pre-ampli- is connected to the MONITOR output and
fier was developed with DIGITAL control for the other is amplified (x2 or x4 max.) before
all functions, so that it contains no potenbeing connected to the LINE output. The
tiometers at all! All functions, such as volLINE output should be connected to the
ume, tone control, balance and input selecinput of an audio power amplifier.
tion can be operated using push buttons. A
Features:
LED display gives a clear indication of all
No compromise high-end design
settings. All functions may be operated with Four stereo audio inputs
an optional remote control unit (GC018).
Exclusive, high finish, aluminium enclosure
Specifications:
High quality ALPS volume potentiometer
Input Sensitivity:
Full valve design
PHONO RIAA: 5.5mV / 50 kOhm
Auto 30 sec. muting (warm up) at power on
CD: 500mV / 32 kOhm
Highly reliable reed relay input selection
TUNER, TAPE1 & 2: 360mV / 22 kOhm
Separate left and right input sections
LINE Output Level: 1Vpp
Programmable level adjustment: +6dB
Signal-to-noise Ratio (A weighted):
additional / increase in gain for each input
PHONO: 75dB
Regulated DC filament supply
TAPE, CD, TUNER: 100dB
Mute function for LINE output
Total Harmonic Distortion: 0.01%
On / off switchable MONITOR output
Frequency Response (-3dB): 8Hz - 150kHz
(for tape, CDR, MD,...)
Channel Separation: 90dB
Specifications:
Cross talk: -99dB
Headphones Output: 280mW / 32 Ohm
Power Consumption: 16W max.
Input Sensitivity for 0dB (0.775Vrms) output
LINE signal with the Gain set at x4 max.:
Weight: 5kg
200mV min. / 50 kOhm input
Maximum Output Signal Level: 35Vpp
Output Load Impedance: 10 kOhm or higher
Signal-to-noise Ratio: (A-weighted ref. 0dB)
for LINE Output: 100dB
IR TRANSMITTER FOR
Total Harmonic Distortion: 0.04% at 1kHz
DIGITAL PREAMPLIFIER GC017
using load with 47 kOhm impedance
Gain: (adjustable)
x2 max. (default maximum gain) or
x4 max. (when + 6dB LED indicator is on)
Frequency Bandwidth: (with x2 gain)
7Hz to 150kHz within (-3dB)
18Hz to 55kHz within (-0.3dB)
Channel Separation: 85dB at 0dB input
Input Cross Talk: -100dB at 0dB input
This IR transmitter may be used to remotely Weight: 2.7kg
operate the pre-amplifier (GC017). A special
key has been provided, which allows the
memory content to be preserved. Not only its
versatility, but also its aluminium housing
and the special VELLEMAN tactile keyboard
makes this remote control unit kit unique.
Specifications:
Transmitter Range: 30m
02.18
This is an audio control amplifier kit with
superb specifications although it does not
use valves. Connect up to four signal
sources to this amplifier’s stereo RCA inputs:
Phono / Auxiliary, CD, Tuner and A/V audio
inputs. It has a headphone output. The volume knob adjusts the headphone and LINE
outputs. One audio signal source is selected
at a time. This signal is split in 2: one signal
is connected to the MONITOR output and
the other is amplified (x2 or x4 max.) before
being connected to the LINE output. The
LINE output should be connected to the
input of an audio power amplifier.
Features:
No compromise high-end design
Four stereo audio inputs
Exclusive, high finish, aluminium enclosure
High quality ALPS volume potentiometer
Audio grade selected op-amps
Capacitor-less output coupling
Highly reliable reed relay input selection
Separate left and right input sections
Programmable level adjustment: +6dB
additional / increase in gain for each input
Headphones output socket
Mute function for LINE output (not phones)
On / off switchable MONITOR output
(for tape, CDR, MD,...)
Built-in phono RIAA input section and the
Phono / Aux input can be configured as
either a phono or line input
Specifications:
Input Sensitivity for 0dB (0.775Vrms) output
LINE signal with the Gain set at x4 max.:
PHONO: 3mV / 47 kOhm input
Auxiliary or LINE: 200mV / 50 kOhm input
Maximum Output Signal Level: 26Vpp
Signal-to-noise Ratio: (A-weighted ref. 0dB)
for LINE Inputs: 105dB
for the PHONO Input: 83dB
MONITOR Output Impedance: 1 kOhm
LINE Output Impedance: 360 Ohm
LINE Output Load Impedance: >10 kOhm
Headphones Power: 250 mW max. / 32 Ohm
Total Harmonic Distortion: 0.003% at 1kHz
using load with 47 kOhm impedance
Gain: (adjustable)
x2 max. (default maximum gain) or
x4 max. (when + 6dB LED indicator is on)
Frequency Bandwidth: (with x2 gain)
4Hz to 500kHz within (-3dB)
10Hz to 100kHz within (-0.3dB)
Channel Separation: 90dB at 0dB input
Input Cross Talk: -100dB at 0dB input
Weight: 2.2kg
AUDIO POWER
AMPLIFIERS
0.5 WATT TO 8 WATT
Frequency Bandwidth: 20 - 20 000 Hz
MONO AMPLIFIER 1 WATT
1 WATT STEREO AUDIO AMPLIFIER
WITH DC VOLUME CONTROL 12V
INTRODUCTION TO CLASS AB
MONO AMPLIFIERS
Using amplifier modules is modern, quick
and easy but it teaches nothing about how
they work. Here is a Class AB amplifier
made from individual components which will
deliver several watts of power into an ordinary 8 ohm speaker. Gives hands-on learning about cross-over distortion, bootstrapping, complementary pairs, and push-pull.
Detailed explanations given.
Small universal amplifier with a peak sound
capacity of 2 Watt.
Operating voltage: 6 to 9Vdc
Input sensitivity: approx. 50 mV
Loudspeaker connection: 8 ohm
Frequency range: approx. 20 to 25000 Hz
1 WATT STEREO AUDIO AMPLIFIER
The TDA7053A is an integrated stereo audio
power amplifier with DC volume control in a
16-pin dual-in-line plastic package. It is
designed for use in TVs and monitors but is
also suitable for battery-operated equipment.
Power Supply: 4.5 to 15V DC.
1 WATT STEREO AMPLIFIER WITH
VOLUME CONTROL 4-12V
0.5 WATT LOW VOLTAGE LM386
MONO AUDIO AMPLIFIER 4-12V
This stereo amplifier kit makes use of the
KA2209 or TDA2822. It is designed for
portable radios etc. Wide operating supply
voltage of 1.8 to 9Vdc suitable for battery
operation. Data sheet on Internet:
http://www.kitsrus.com/pdf/ka2209b.pdf
Specifications:
Stereo Output (using 4 Ohm speaker):
3Vdc supply voltage: 0.1W/ch
6Vdc supply voltage: 0.65W/ch
A kit designed to be used as a small power
9Vdc supply voltage: 1W/ch
audio amplifier or as a building block project
where a battery powered, variable gain
audio amplifier is required, for example radio
amplifiers, ultrasonic and server drivers, voltMANUFACTURER CODE: K087
age converters etc. The semiconductor
LM386 is a general purpose power amplifier
designed for use in low voltage applications. 1 WATT STEREO AUDIO AMPLIFIER
Gain may be set between 20 and 200.
LM386 data sheet included.
The kit uses two LM386N ICs on one PCB. It
has independent volume control as well as
an on-board jumper to change between a
gain of 20 and 200.
Power supply: 4 - 12V DC
Requires speakers rated 3W or more.
2 WATT MONO AUDIO AMPLIFIER
1 WATT LOW VOLTAGE TDA7052
MONO AUDIO AMPLIFIER 6-12V
This kit is a 1 Watt peak mono amplifier
using the Philips TDA7052 IC. It is a useful
building block where a battery powered
audio amplifier is required. Requires no
heatsink. Two may be used for stereo applications.
Output Power: 250 mW rms / 8 Ohm load
using 12Vdc supply
Supply Voltage: 3 - 15 Vdc
Supply Current: 300 mA max.
This stereo amplifier kit makes use of the
Philips TDA7053. 1 Watt peak output power
per channel at 6Vdc supply voltage. It is
designed for portable radios etc. Wide operating supply voltage of 3 to 18Vdc suitable
for battery operation.
Specifications:
Idle Current: 16mA max.
Peak Output Power per channel:
6Vdc supply voltage: 1W 4 - 8 Ohm load
9Vdc supply voltage: 1W 4 - 16 Ohm
12Vdc supply voltage: 2.5W 8 - 16 Ohm
12Vdc supply voltage: 0.25Wrms 8 Ohm
Frequency Response -3dB: 10 - 100 000Hz
Gain 39dB
Input Impedance: 4.7kOhm
02.19
This mono audio power amplifier kit is built
around the National Semiconductor LM380.
The peak power output is 2 Watt into a 4
Ohm loudspeaker. The circuit requires only a
few components. It does not require a
heatsink. It is short circuit and overload protected. High amplification gain.
Specifications:
Supply Current: approximately 0.3 A
Idle Current: 7 - 15 mA
Gain: (50x) or 34 dB max.
Power Output: (4 - 8 Ohm speaker loads)
2 Watt max. at 20Vdc supply voltage
0.5 Wrms at 12Vdc supply voltage
Frequency Bandwidth-3dB: 20 - 100 000Hz
Dimensions: of PCB 44 x 44mm
assembled total height: 25mm
UNIVERSAL 3.5W
AMPLIFIER MODULE
7W MONO AUDIO AMPLIFIER
STEREO AMPLIFIER 2 X 2.5 WATT
A mono audio amplifier module that is capable of driving a loudspeaker at 3,5 Watt.
Specifications:
The amplifier has an input sensitivity of
Maximum Output Power: 3,5W
approximtaely 100mV. If it is desired to con- Speaker Impedance: 4 - 16 Ohm
nect signal transmitters with inferior output
Input Sensitivity: 80mV
voltage (eg. some microphones), a preampli- Frequency Response: 40 - 20 000Hz
fier has to be connected in series. Any signal Dimensions: 30 x 25 x 15mm
source with superior output voltage as
Requires: a linear 10k Ohm potentiometer:
100mV, as eg crystal record player, cassette
(HB167)
tape-recorder, diode receiver etc. can, of
course, be connected directly. The amplifier
achieves its maximal power only with 12V
3 WATT STEREO AMPLIFIER 12V
operating voltage and using a 8 ohm loudspeaker. Screened cable will prevent any
hum interferences in the amplifier.
Operating Voltage: 6 to 12V
3W MONO AMPLIFIER
Features:
This small amplifier kit is constructed around
the TDA2003 IC, capable of delivering
4Wrms at 4ohms. The IC is completely thermally and short-circuit protected. A conventional direct voltage supply can be connected.
Specifications:
Peak Music Power Output: 7W / 4Ohm
RMS Power Output: 3.5W / 4Ohm or 2W /
8Ohm
Total Harmonic Distortion: 0.05% (1W /
1kHz)
Frequency Response: 20Hz to 20kHz (-3dB
Bandwidth)
Signal-to-Noise Ratio: 86dB (A weighted)
Input Sensitivity: 40mV / 150kOhm
Overload and Short-Circuit Protected
Supply Voltage: 15Vdc (8 to 18Vdc is possible)
A simple stereo 3 watt per channel amplifier
based on the BA5406 power amplifier monoMODULE ORDER CODE: AB353
lithic IC. Minimum component count. Runs
on 12Vdc power supply. Good general purMANUFACTURER
CODE: K4001 / VM114
pose amplifier. Dimensions = 67mm x
38mm. Requires heatsink (supplied.)
6 WATT STEREO AMPLIFIER
This mono audio amplifier kit is small but
powerful. The design makes use of the
TDA7267A fromST Microelectronics. It is
suitable for a wide range of low voltage,
audio amplifier applications.
Specifications:
Maximum Output Power: 3Wrms
using 15Vdc supply voltage at 10% THD
Speaker Impedance: 4 - 8 Ohm
Voltage Gain: 32dB (40x)
Frequency Response: 50 - 20 000Hz
Thermal and Short Circuit Protection
Requires: a log. 47k Ohm potentiometer:
(AB831)
This kit is a mono audio power amplifier
using 1 TDA2002 or TDA2003. 8 Watt peak
power for 4 Ohm load at 16Vdc. The
heatsink and all components are supplied
except the loudspeaker.
Operating Voltage: 6 to 18 Vdc
This is a stereo class AB audio power ampli- Supply Current: 1.2 max.
fier built around the TDA2005 ideal for hi-fi
Input Sensitivity: 100 mV / 40 dB gain
applications. Maximum output power of 8
Loudspeakers: 2 to 8 Ohm
Wrms is obtained with 2 Ohm speaker per
Output Power: 4 Wrms / 4 Ohm, 12Vdc
channel at 16Vdc / 2A. For maximum power Frequency Bandwidth -3dB: 20 - 40 000Hz
It will require a larger heatsink than what is
supplied. Note that the power supply should Not Included:
be well filtered to prevent mains hum.
Heatsink: (GB550)
Specifications:
Supply Current: 2A
Input Signal level: 150mV for full power
Gain: 30dB max.
Frequency Bandwidth -3dB: 15 - 50000kHz
Output Power per channel:
12Vdc supply voltage: 4Wrms 4 Ohm
Dimensions: of PCB is 46 x 76mm
total assembled height: 40mm
02.20
AUDIO POWER
AMPLIFIERS
8 WATT TO 80 WATT
(HB167)
MONO AMPLIFIER 12W
10 WATT MONO HI-FI POWER
AMPLIFIER
Hi-Fi amplifier, output: 4 to 12 watts,
depends on operating voltage and loudA Hi-fi amplifier with one IC. At the amplifier
speaker.
could be connected signal sources with at
Operating voltage: 8 to 16V
least 160mV output voltage (e.g. crystal
Loudspeaker: 1.6 to 8 ohms
record players, cassette recorders, etc.).
Frequency range: approx. 40 to 20.000 Hz.
With a pre-amplifier it will be feasible to
Vi: 50mV
increase the sensitivity up to approx. 1mV.
This is a general purpose mono hi-fi amplifi- Not Included:
Then, it would be possible to connect mirer, it is based on the TDA2002 IC. It can be Heatsink: approx. 10x4x2cm
cophones, too. In case that you want to con- used with any stereo preamplifier and with
nect at the amplifier magnetic record playtwo of these kits you can make a very good
ers, it will be necessary to pre-connect an
low power hi-fi system. It has an input sensiMANUFACTURER CODE: B075
equalizing pre-amplifier. The amplifier will
tivity of 50mV and works off 9 - 16VDC supachieve its max. power with 8 W at an oper- plies making it suitable for use as a booster
15 WATT MONO AMPLIFIER
ating voltage of 16 V. With lower voltage, the in the car or as an extra amplifier in portable
MODULE 10 TO 20 VDC
max. power will decrease correspondingly.
equipment.
Operating voltage: 6 to 16 Vdc.
Input sensitivity: 50mV
Sensitivity: approx. 160mV
Output impedance: 2-8 ohm
Loudspeakers: 4 to 16 Ohm
Freq. response: 40Hz- 15KHz
Frequency range: 40 to 20000Hz
Power supply: 9 to 16VDC / 1.2A
Quiescent current: 20mA
Max. currentL 1.2A
STEREO AMPLIFIER 2X8W
This sensitive mono amplifier module is ideal
10 WATT STEREO AMPLIFIER 8-28V for replacing obsolete small amplifier circuits.
The amplifier has an input sensitivity of
approx. 250mV. In case the signal sources,
to be connected, have low output voltages
(e.g. microphones), it is necessary to preconnect a preamplifier. The amplifier will
achieve maximal power solely with 15Vdc
operating voltage and with a 4 Ohm loudspeaker. When lowering operating voltages
and increasing loudspeaker impedance the
rated power will decrease correspondingly.
Please only use screened wires when for
connections at the input of the amplifier and
make sure to connect the screening network
with power supply ’earth’ (negative battery).
The screened wire will help to prevent any
hum interferences within the amplifier.
Suppy Voltage: 6 to 15Vdc
Loudspeaker Impedance: 4 to 16 Ohm
It has two inputs, with different input sensitivities, that makes it a very useful boosted
extension speaker driver.
Features:
Short circuit proof and thermally protected
High (speaker) and Low (line) level inputs
Boosted extension speaker driver
Adjustable gain using trimmer potentiometer
The kit uses the TDA2009 which is a class
Automatic quiescent current setting
AB dual hi-fi audio amplifier IC designed for Single voltage rail power supply
quality stereo applications. This is a standard Vertical and horizontal mounting holes
data book application circuit using a miniSpecifications:
mum of external components. Each channel Supply Voltage: 10 - 20Vdc
is capable of delivering 10 Watts into 4 Ohm Supply Current: 0.5 - 1A
speakers using a 24VDC supply voltage.
Maximum Output Power (4 Ohm): 15 Watt
Supply voltage: 8 - 28VDC
Output Load Impedance: 4 - 16 Ohm
PCB size: 77x43mm
Frequency Response: 15Hz to 80kHz
Size: 75 x 65 x 35mm
Not Included:
Rectifying power supply Code: AA290 and
Transformer Code: QB072
UNIVERSAL 12W
AMPLIFIER MODULE
UNIVERSAL 18W
AMPLIFIER MODULE
A mono audio amplifier module that is capable of driving a loudspeaker at 12 Watt.
Specifications:
Operating Voltage: 6 - 16Vdc
Maximum Output Power: 12W
02.21
A mono audio amplifier module that is capable of driving a loudspeaker at 18 Watt
music power.
Specifications:
Maximum Output Power: 18W
(HB167)
BOOSTER AMPLIFIER 2 X 25W
35 WATT STEREO AMPLIFIER
MODULE 16 TO 32VDC
18 WATT AUDIO POWER
MONO AMPLIFIER 8-18V
A very well designed power amplifier suitable
for use in the car as a power booster for the
existing stereo system. It can be connected
directly to the output of the car STEREO
(cassette player or radio). The heatsinks are
supplied.
Specifications:
Output Power: 2 x 25W / 4 Ohm speakers
This kit contains the essential components to
Quiescent Current: 50mA
build a low voltage, high power mono 18W
Bridge Tied Load (BTL) amplifier module
Load Impedance: 4Ohm
using the Hitachi HA13118. The circuit is
straight out of the data sheet. Only a few
external passive components are required to
MANUFACTURED
BY: SMART KIT
make the module. The IC contains surge
protection circuits and thermal shutdown circuits.
2 X 30W AUDIO POWER AMPLIFIER
Output power: 18W (THD = 10%) 14W (THD
= 1%)
Input resistance: 20 - 40k Ohm
Frequency response: 50Hz - 20kHz (-3dB)
20Hz - 40kHz (-6dB)
Current @ 18W: 2.5A (approx)
Operating voltage: 8 - 18V
This versatile, sensitive, stereo amplifier
module, with its large voltage and wattage
range, is ideal for replacing obsolete small to
medium amplifier circuits.
Features:
Stereo: separate left and right channels
Each channel’s gain is adjusted with a
trimmer potentiometer
Single voltage rail power supply
Vertical and horizontal mounting holes
Specifications:
Supply Current: 1 - 2A
Maximum Output Power (4 Ohm):
35 Watt MP or 20 Watt RMS
Input Sensitivity: 500mV for full output
Input Impedance: 100k Ohm
Not Included:
Transformer Code: AA579 or AA750
40W POWER
AMPLIFIER MODULE
25-0-25VDC
Kit contains the essential components to
build a hifi amplifier module using the
LM1875 IC. Heatsink, speakers and cables
are to be supplied by the user.
Power Supply: dual +/- 25VDC
Features:
This small stereo amplifier kit is constructed
with the TDA1521 IC, with a maximum output power capability:
2 x 15Wrms (4 Ohm)
2 x 10Wrms (8 Ohm)
The IC is thermally and short-circuit protected. Additional rectifier and smoothing filter
are unnecessary, as an AC, (alternating current), supply voltage can be directly connected to the amplifier. The heat sink is supplied.
Specifications:
Peak Music Power Output: 2 x 30W / 4ohm
RMS Power Output: 2 x 15Wrms / 4 Ohm or
2 x 10Wrms / 8 Ohm
specified at (1W / 1kHz)
Channel Separation: 70dB
Frequency Response: 7Hz to 60kHz (-3dB
Bandwidth)
Input Sensitivity: 300mV / 150k Ohm
Transient Suppression On/Off Switch
Overload and Short-Circuit protection:
for max. 1 hour
Power Supply: 2 x 12Vac
Supply Current: 2A use a centre-tapped
transformer like (PB196) (not included)
Dimensions: 70 x 50mm,
MANUFACTURER CODE: K4003 / VM113
02.22
Audio amplifier module that is capable of
driving loudspeakers at 40 Watt music
power.
Specifications:
Loudspeaker Impedance: 4 - 8 Ohm
Maximum Output Power: 40W into 4 Ohm
loud speaker using 16Vdc supply voltage
Frequency Range: 20 - 25 000Hz
(HB167) and also
Not Included:
Heat Sink: approx. 10 x 4 x 2 cm
MODULE 10 TO 36 VDC
This sensitive mono amplifier, with its wide
voltage range and on board gain control, is
ideal for replacing obsolete medium power
ICs and amplifier circuits.
Features:
Automatic quiescent current setting
Wide supply voltage range
Single voltage rail power supply
Specifications:
Supply Voltage: 10 to 36 Vdc
Supply Current: 1.5 - 3 A
Input Impedance 100k Ohm
Not Included:
transformer Code: AA753 or PB196
This is a mono 50Watt rms power amplifier
kit that makes use of the ST Electronics
TDA7294. It is intended to be used as a
class AB, high-quality, Hi-Fi amplifier. It
requires a large, high power heatsink and
dual voltage supply.
Specifications:
Power Supply: ±30Vdc dual supply
Supply Current: ±2A
Input Sensitivity: 1.3Vpp for full power
Input Impedance: 10 kOhm
Frequency Response: 16Hz - 100kHz
Slew Rate: 10V / µs
Power Output:
50Wrms into 8 Ohm loudspeaker
82Wrms into 4 Ohm loudspeaker
Not Included:
Heatsink: 1.4 °C/W use (AB267) and larger
Sensibility: 300mV
Frequency: 20 to 30.000 Hz
Not Included:
Heatsink: 10x4x2cm
50 WATT STEREO AUDIO
AMPLIFIER MODULE
(21-0-21VDC DUAL SUPPLY)
Amplification factor: 24
Sensitivity: 0.707-1.5 V
Freq. response: 5-35,000 Hz
Distortion: 1 kHz - 0.05%, 10 KHz-0.08%, 20
kHz - 0.1%
KIT ORDER CODE: QB002
A high quality power amplifier using a
TDA2030 amplifier IC.
Operating voltage: 24 to 40 V max.
This robust, versatile, stereo amplifier modLoudspeaker: 4 to 16 Ohm
ule, with its large voltage and wattage range,
Frequency Range: 20 to 20.000 Hz
is ideal for replacing obsolete small to mediNot Included:
um amplifier circuits. Its efficient dual supply
Heatsink: min. 15 x 5 x 3 cm
configuration giving more watts and clear
thermal resistance < 2K/W and
sound makes it an ideal hi-fi building block.
Insulating material for 3 x TO220 packages
Features:
Dual voltage rail power supply
AUDIO POWER
Power on mute-off of output signal
AMPLIFIERS
Specifications:
80 WATT TO 400 WATT
Dual Supply Voltage: -21Vdc and +21Vdc
Supply Current: 1.2 - 2.5A
140 WATT MONO AUDIO AMPLIFIER
MODULE (40-0-40V DUAL SUPPLY)
Not Included:
transformer Code: PB196 or AA731
60 WATT MONO
HI-FI POWER AMPLIFIER
This mono amplifier module gives the highest practical wattage obtainable from a single IC without forced cooling. The amplifier is
ideal for use as an active speaker driver, PA
amplifier or hi-fi building block. The heatsink
is supplied with this module.
Features:
Dual voltage rail power supply
Power on mute-off of output signal
Mute and standby functions
Produces full output into both 4 or 8 Ohm
Specifications:
This is a very well designed power amplifier
Dual Supply Voltage: 30-0-30 Vdc (4 Ohm)
that will give you true hi-fi quality. An amplifiDual Supply Voltage: 40-0-40 Vdc (8 Ohm)
er for the most demanding constructors. The
Supply Current: 1.2 - 2.5 A
circuit incorporates electronic protection for
Maximum Output Power (4 - 8 Ohm):
the output transistors. Suitable power supply
SB023 and transformer RB012.
Output power: 60W / 8 ohm or 80W / 4 ohm
Input Sensitivity: 1.3V for full output
(RMS)
High-quality Hi-Fi amplifier including bridge
Supply voltage: 40-0-40 VDC (8 Ohm load)
circuit with IC. Power: 50W music, 30W sine. Supply voltage: 30-0-30 VDC (4 Ohm load)
Dimensions:
Operating voltage: 6 to 18 Volt
Quiescent current: 60mA
Amplifier Module: 62 x 65 x 30mm
Current supply: max. 3A
Max. current: 4A
Heat Sink: 72 x 115 x 35mm (is supplied)
02.23
Not Included:
Transformer Code: GB995 or AA275
short-circuit protected. It is ideal for use in
an active speaker system, driving a subwoofer, guitar amplifier, home theatre systems etc.
ANTI SPEAKER PLOP FOR
The kit includes an AC to DC voltage rectifySTEREO 70W RMS/CHANNEL
CAR BOOSTER GC037
ing power supply. The transistor mica insula(OR 140W RMS MONO)
tors, insulating bushes, washers, nuts and
bolts are supplied. The heatsink and transPOWER AMPLIFIER
former are not included.
Specifications:
Supply Voltage: 2 x 25 - 30Vac
Supply Current: 2A
Peak Music Power Output:
200W into one 4 Ohm loudspeaker
RMS Output Power:
100W into one 4 Ohm loudspeaker
This stereo amplifier module gives the high70W into one 8 Ohm loudspeaker
est practical wattage obtainable from a pair
Distortion: 0.02% @ 1KHz / 10W
of ICs without forced cooling. The amplifier is
Damping Factor: >800
ideal for use as an active speaker driver, PA This kit is used to prevent any annoying plop Frequency Response (-3dB): 3Hz - 200kHz
amplifier or hi-fi building block. The heatsink from occurring in speakers when switching
Input Sensitivity: 0.6Vrms
the car booster, (GC037), on and off. In addi- Signal-to-Noise Ratio: 115dB
is supplied with this module.
tion, it provides protection for the MOSFET
Features:
PCB dimensions: 107 x 62mm
transistors and the car battery (monitoring
Not Included:
the voltage drop). The entire circuit can be
Safe operating area protected
Heatsink: 173 x 75 x 28mm (AC885) and
built into the the housing of the car booster. Transformer: 230 to 2 x 30V, 2A (AC884)
Specifications:
Only suitable for CAR BOOSTER 2 X 100W
kit with order code GC037
On-board rectifying power supply, but the
Soft start of the switched mode power supply
transformer is not included
Switch-on
delay
of
the
speakers:
±
2
sec.
Power on mute and anti plop circuit
200W MONO / STEREO AMPLIFIER
Immediate switch-off of the speakers when
Mute and standby functions connector pins
the car booster is switched off
An on-board, full wattage rated, heat sink is
Battery Voltage Monitor: switch off at 10V
supplied with this amplifier module
Produces full output into both 4 or 8 Ohm
Can also be modified to be a 300W PMPO
or 140W RMS mono bridged power amplifier
Specifications:
Supply Voltage (4 Ohm): dual 21-0-21 Vac
Universal, robust and compact are the words
200W MONO AMPLIFIER
Supply Voltage (8 Ohm): dual 30-0-30 Vac
to describe this amplifier kit.
Supply Current: min. 3A - ideally 5A
Universal:
Maximum Output Power per Channel:
A stereo or a mono amplifier. Three input
140 Watt PMPO or 70Watt RMS
sensitivities are selectable.
Robust:
Input Sensitivity: 1.3V for full output
Overload and short-circuit protection, protecInput Impedance: 100k Ohm
tion against incorrect power supply polarity
and thermally protected too. Speaker tranSize: 90 x 205 x 55mm (including heatsink)
sient suppression.
Not Included:
Compact:
Transformer Code: (AA275) or (RB012)
High-power mono amplifier kit of top-class
The PCB housing also functions as the
quality for a loudspeaker from 4 to16 Ohm.
heatsink. The amplifier may be used as a
It makes use of two TDA2030 amplifier ICs. built-in module, or as a freestanding unit.
CAR BOOSTER 2 X 100W
Operating voltage: 24 to 36V max. 5A
Specifications:
Frequency Range: 20 to 20.000 Hz
RMS Output Power:
Input Sensitivity: 0.5 - 0.8V
2 x 50W / 4Ohm ; 2 x 40W / 8Ohm
Not Included:
RMS Mono-Bridged Output Power:
Heatsink: min. dimensions are 20x10x4cm
100W / 8Ohm
(thermal resistance < 1K/W) and
Total Music Output Power: 200W
Insulators for six TO220 packages
Harmonic Distortion: 0.01% at 1kHz
Stereo Channel Separation: 85dB
At last a kit that enables you to build an
Damping Factor (at 100Hz): > 1000
affordable high power amplifier for your car.
Thanks to its universal connections, this
DISCRETE 200W
Input Sensitivity: either 300mV, 550mV or 1V
power amplifier may be connected to any
MONO POWER AMPLIFIER
switchable
equipment. For trucks, it can be adapted to
Thermal Protection: max. 1hour
be supplied from a 24V source. Double
Short-Circuit and Overload Protection: max.
switched mode power supply (PWM) with
10 sec.
MOSFET transistors. The heat sink and
Supply Voltage: + 28Vdc and - 28Vdc max.
housing is supplied.
Supply Current:
Specifications:
For two x 8 Ohm loudspeakers: 2.5A max.
For two x 4 Ohm loudspeakers: 4A max.
can be adjusted for 24Vdc supply voltage
Mono-Bridged single 8 Ohm: 4A max.
Output Power: 2 x 100W max.
Required Transformer: (not included)
CD / LINE / LS input and selectable
230V to 18-0-18V 2x4.44A 160VA (GB995)
This 200W mono amplifier kit is excellent
Frequency Bandwidth: 10Hz - 100kHz with
Required Power Supply: (not included)
value for money. Only discrete components
the signal connected at the CD input.
50V-0-50Vdc / 6A Module (AA258) or
are used in this design. The output section of
Input Impedance: 47 kOhm or 135 Ohm
+40V and -40V / 6A kit (AB303)
the amplifier makes use of epitaxial darlingDimensions: 250 x 190 x 50mm
ton transistors. The amplifier is overload and Dimensions: 210 x 85 x 64mm
02.24
MANUFACTURER CODE: K4004B
65W MONO AUDIO
VALVE AMPLIFIER
This is a valve audio power amplifier kit. It
has one channel, low distortion, deep bass
and delivers up to 65 Watt of pure class A
power. An attractive enclosure, with chrome
plated valve base rings and heavy duty cabinet feet, has been supplied to match this
state-of-the-art design.
Features:
Four quality KT88 output valves are used
in a push-pull combination
Gold plated speaker and RCA connections
Easy bias adjustment with LED readout
Standby mode stretches valve life
Soft start prevents fuse tripping at power-up
Very high quality components are used
Removable cabinet bottom
Transformers for power and output supplied
Specifications:
Maximum Power Consumption: 300VA
RMS Output Power: 65W class A into
one 4 or 8 Ohm loudspeaker
Valves: 4 x KT88, 1 x ECC81, 1 x ECC82
Bandwidth (-3dB): 8Hz to 80kHz at 1W
Harmonic Distortion: 0.1% at 1W / 1kHz
Signal-to-Noise Ratio: 110dB (A-weighted)
Input Sensitivity: 1Vrms min. (adjustable)
Specifications:
Power Consumption:
required at full power: 230W
in standby mode: 60W
RMS Output Power: 90W into
one 4 or 8 Ohm loudspeaker
Valves: 4 x EL34, 1 x ECC81, 1 x ECC82
Bandwidth (-3dB): 2Hz to 125kHz at 1W
Harmonic Distortion: 0.1% at 1W / 1kHz
Input Sensitivity: 1Vrms min. (adjustable)
5mVrms
Output:
Maximum RMS Output Power:
90W / 4 Ohm and 70W / 8 Ohm speaker
Minimum Load Impedance: 4 Ohm speaker
Damping Factor (ref. 8 Ohm / 100Hz): 1000
Weight: 3.4kg
2 X 90W AUDIO VALVE AMPLIFIER
WITH CHROME FINISH
HIGH-END 90W RMS MONO
MOSFET POWER AMPLIFIER
For most of us a high power valve amplifier
is unaffordable. This kit changes that, so that
now everybody can enjoy that sublime “valve
sound”. The sound of valves has never been
This is a mono MOSFET power amplifier kit. surpassed by transistors nor by FETs. In the
course of developing this amplifier, special
This high-end design has superb specificaattention was given to the housing so that
tions. Special attention was given to the
exclusive, high finish, solid aluminium enclo- the expensive valves are on display in a way
that is very pleasing to the eye. The weakest
sure. The power output level indicator, with
point of an valve amplifier are the output
backlight, is very pleasing to the eye.
transformers ; that’s why we use two ultra90W RMS MONO AUDIO
Features:
VALVE AMPLIFIER
No compromise high finish, high-end design linear and over-rated output transformers
(toroidal) to guarantee a rich bass response.
High grade speaker and input connections
To extend the life of the precious valves, the
Ideal to place next to the speaker (shorter
amplifier is provided with a switch-on delay,
speaker wires are required)
(1 minute), so that the high voltage supply is
Bypass output to drive bi-wired speakers
switched on after the valves have warmed
using separate amplifiers
Auto-power on mode when an input signal is up.
Features:
sensed
Auto-standby function after 15 minutes when Pure valve sound with high quality EL34
valves
no input signal has been sensed
Ultra-linear and output transformers
High quality D-MOS IC output stage
Robust supply with total of 40mF capacitors (toroidal)
High quality black and chrome housing:
Relay-less speaker DC protection
Upgrade your guitar amplifier, jukebox or
chrome valve socket covers
Real
Clipping
distortion
LED
indicator
construct your own audio system with this
Removable bottom for easy access and
Overheating
protection
with
LED
indicator
superb valve amplifier kit. It has one chanservice
Overload protection
nel, low distortion, deep bass and delivers
Gold plated input and speaker terminals
Specifications:
up to 90 Watt of audio power. It will satisfy
Easy bias adjustment with LED indication
even the most critical listener. A single PCB Power Supply: 230Vac
Standby function
Maximum
Power
Consumption:
100W
is used and the manual, valves, toroidal
“Soft start” circuit for power transformer
Signal-to-noise
Ratio
(A-weighted
ref.
max.
power and output transformers are supplied
Specifications:
out):
105dB
Please note that this kit does not include any
RMS Output Power:
Total
Harmonic
Distortion:
enclosure.
2 x 0 - 15 W class A
0.003% at 1kHz ref. 1W
Features:
2 x 15 - 90 W class AB
Frequency
Bandwidth
(-3dB):
Four quality EL34 output valves are used
Output Impedance: 4 or 8 Ohm
9Hz
to
120kHz
in
50W
in a push-pull combination
Power Bandwidth (-3dB): 15Hz - 40kHz
Input:
Easy bias adjustment with LED readout
for 50W output
Input
Sensitivity
for
maximum
output:
Standby mode stretches valve life
Frequency
Range (-3dB): 8Hz - 80kHz
0dBm 1Vpp (0.775Vrms)
Soft start prevents fuse tripping at power-up
for 1W output
Input
Impedance:
15
kOhm
Very high quality components are used
Harmonic Distortion:
Minimum auto-power switch on voltage:
02.25
0.1% (1kHz at 1W)
0.7% (1kHz at 90W)
Signal-to-noise Ratio: > 105dB
(A-weighted ref. 90W)
Channel Separation: > 75dB (ref. 90W)
Input Sensitivity: 1Vrms for 90W output
Damping Factor: > 10 (at 100Hz)
Weight: 17kg
2 X 90W AUDIO VALVE AMPLIFIER
WITH BLACK FINISH
This valve power amplifier kit has the same
specifications as the 2 x 90Wrms valve
amplifier, (GC015), except that this amplifier’s housing has a black instead of chrome
finish.
400W MONO / STEREO AMPLIFIER
This kit is a universal, robust and compact
audio power amplifier.
Universal:
It may be configured as a stereo or mono
amplifier. Three input sensitivities are selectable.
Robust:
Overload and short-circuit protection, protection against incorrect power supply polarity
and also thermally protected. Speaker transient suppression.
Compact:
The PCB housing also functions as the
heatsink. The amplifier may be used as a
built-in module, or as a freestanding unit.
Specifications:
RMS Output Power:
2 x 100W / 4ohm or 2 x 75W / 8ohm
RMS Mono-Bridged Output Power: 200W /
8ohm
Total Music Output Power: 400W
Total Harmonic Distortion: 0.003% specified
at 1kHz
Stereo Channel Separation: 76dB
Damping Factor (at 100Hz): > 2000
Input Sensitivity: either 150mV, 300mV or
950mV (selectable)
Supply Voltage:
For 8 Ohm Speakers:
+(40 to 45)Vdc and -(40 to 45)Vdc / 2.5A
Required: (Not included)
+40V and -40V / 6A kit (AB303) or
50V-0-50Vdc / 6A Module (AA258) and
30-0-30 V Transformer (AA259)
For 4 Ohm Speakers or Mono-Bridged:
+(30 to 35)Vdc and -(30 to 35)Vdc / 5A
Required: (Not included)
+40V and -40V / 6A kit (AB303) or
50V-0-50Vdc / 6A Module (AA258) and
25-0-25 V Transformer (AA275)
300W MONO MOSFET AMPLIFIER
This kit is a mono MOSFET audio power
amplifier that meets the strictest standards
for quality and robustness. The final output
stage is carefully designed for Class A operation, though without unnecessary power
loss. It is called “Efficient Class A”. There are
no adjustments required. The heatsink and
transformer are included. Ideally suited for
installations in disco, bars and active speaker systems.
Specifications:
Peak Music Power Output:
300W / 4 Ohm or 200W / 8 Ohm
RMS Power Output:
155W / 4 Ohm or 100W / 8 Ohm
Damping Factor: > 600
Input Sensitivity: 1Vrms
Speaker Switch-On Delay and Speaker
Protection
Thermal and Short-Circuit Protection
Weight: 4.8kg
300W RMS MOSFET MONO AUDIO
AMPLIFIER WITH POWER SUPPLY
This powerful state of the art MOSFET
power amplifier gives true hi-fi performance.
The generous power supply with its toroidal
transformer and the use of constant current
generators permit it to have a superior slew
rate. This very high speed response time
enables it to accurately reproduce even the
fastest changes in the music, giving clean
crisp sound right through the audio spectrum. Two amplifiers can be used at 600W
RMS in dual bridge operation.
Specifications:
Supply voltage: 220Vac
(a 12Vdc output point is included)
Output Power (4 Ohm): 310 Watt RMS
Output Power (8 Ohm): 180 Watt RMS
Frequency response: 15Hz - 60kHz
Input sensitivity: 0.775V RMS for full output
Input impedance: 47k Ohm
Harmonic Distortion: less than 0.01%
Slew rate: 100V/µs
Signal to Noise Ratio: 105dB
(measured at 1W into an 8 Ohm load)
Maximum Heatsink Temperature: 100°C
Dimensions:
350 x 100 x 115mm (including heatsink)
02.26
600W MONO / STEREO
MOSFET AMPLIFIER
This audio power amplifier meets the
strictest standards for quality and robustness. Using a very special circuit. The end
stage is always set to CLASS A, without any
unnecessary loss of power. That is why it is
called “EFFICIENT CLASS A”. It is stereo
with two separate mono amplifiers. By
switching both channels into a bridge configuration, a mono amplifier with double power
is obtained.
A major advantage of this amplifier kit is that
NOT A SINGLE ADJUSTMENT is needed to
any of the settings ! It comes complete with
heatsinks, transformers, housing and front
panel.
Optional: a LED power meter is available
with order code (GC014).
Specifications:
Power Supply: 230Vac / 50Hz
Music Power: 2 x 300W / 4 Ohm speakers
2 x 200W / 8 Ohm speaker
RMS Power: 2 x 155W / 4 Ohm speakers
2 x 100W / 8 Ohm speakers
Bridged Configuration Power: (Music Power)
600W Mono into one 8 Ohm speaker
Harmonic Distortion: 0.005%
Damping Factor: > 600
Input Sensitivity: 1Vrms
Signal-to-noise Ratio: 112dB (A-weighted)
Speaker switch-on Delay and Protection
Thermal and Short-circuit Protection
Weight: 11kg
MONO / STEREO
LED POWER METER FOR
MOSFET AMPLIFIER GC013
This LED power meter kit has to be built into
the GC013 MOSFET amplifier in order to
display amplifier power output. It includes
two meter panels that are mounted behind
the correct scale, which has to be illuminated, according to the speakers connected to
the amplifier (4 or 8 Ohms). When the amplifier is switched into a bridge configuration,
then both meters may be connected in
series.
Specifications:
Stereo Scale: (2 vertical displays)
0.001 to 100W / 8 Ohm speakers or
0.002 to 200W / 4 Ohm speakers
Each panel with 12 power levels, divided
over 12 LEDs, another 16 LEDs for scale
illumination
Mono Bridge Configuration: (horizontal)
0.001 to 400W / 8 Ohm speaker
The two panels are used together to indicate
24 power levels, divided over 24 LEDs
Supply Voltage: + 40V and - 40V supplied by
the amplifier GC013
AUDIO SIGNAL
MODIFIERS
VOLUME CONTROL WITH
RF REMOTE CONTROLLER
This is a stereo, passive, audio volume control kit with RF remote controller. The volume
knob, (potentiometer), is motorised. It can be
controlled either by the supplied, keychainstyle, RF remote control unit or manually.
It can be connected to two stereo signal
sources and it has one stereo signal output.
It can select only one signal source at a
time. The selected input signal is first attenuated by the stereo potentiometer, (volume
control), before being connect to the signal
output. The signal output of this device
should only be connected to the input of a
pre-amplifier or power amplifier. This device
can not amplify the input signal, but only
attenuate it, (make it smaller).
The 3-function, RF remote control unit has
two push-buttons: one for volume up and the
other for volume down. Pressing both buttons simultaneously changes the input signal
selection.
Features:
Gold plated RCA connectors
Stereo audio signal path only consists of
passive components
Motor or Manual operation is possible
RF remote control for all functions
The RF remote does not need to 'see' the
receiver like IR does
Self-learning code
Range: 15m max.
Relay (DPDT) controlled input selection
Please note that the RF remote control unit
requires a 12V battery (DB247).
Specifications:
Volume Control with Volume Knob:
Power Supply: 12Vdc
Two Stereo Audio Inputs: RCA connections
Input Signals Range: 1Vpp (line level)
One Stereo Audio Output: RCA connections
Output impedance Range: 0 to 2.5 kOhm
Output Signal Range: 0 to 1Vpp (line level)
the output signal amplitude is adjustable to
be smaller than or equal to the input signal
Volume Control: motorised, stereo, 5 kOhm,
0.1W, Log., single turn potentiometer
Volume Control Speed: 15s (min. to max.)
Indicator LEDs:
Two for channel 1 or 2 input selection
Two for volume up or volume down action
RF remote control unit:
Power Supply: 12V (A23) battery (DB247)
(not included)
keychain-style with 2 push-button switches
Operating Frequency: 433MHz
Approved design: (report BLC/96-0452
according to I-ETS 300 220)
Signal Amplitude: stereo line level input and
output: 2Vrms max.
Volume Range: 0dB to -78dB (62 steps)
LED volume indication
Optional: 2-Channel IR Remote Transmitter
kit (AB299)
MONO SOUND CONTROLLER
ELECTRONIC STEREO
VOLUME CONTROL
This mono sound controller must be superposed to the mono final amplifier. Trebles,
basses and volume are adjustable separately.
This is a stereo audio volume controller kit. It
has a built-in IR-receiver that enables one to
control the volume using an IR remote control. The 2-Channel IR Remote Transmitter
3-INPUTS MONO MIXER 18 VDC
kit (AB299) (not included) will be suitable.
This kit controls the volume of line-level
audio signals, suitable for PC or hi-fi applications. It is small enough to be built into existing units e.g. CD & DVD players, ...
Specifications:
2 Tactile Push-button Switches:
for volume up / down (mute)
This is an easy to build, inexpensive fully
‘Mute’-function with auto fade-in
featured mono mixer. It will prove itself very
Signal Amplitude: stereo line level input and useful in amateur FM transmitters, for mixing
output: 2Vrms max.
the output of musical instruments, in disco’s
Volume Range: 0dB to -78dB (62 steps)
and more. The circuit allows for individual
setting of the input sensitivity of each input
Optional: 2-Channel IR Remote Transmitter and also has separate BASS and TREBLE
kit (AB299)
controls.
Input sensitivity: 150-300 mV pp.
Max. input signal before distortion: 1 V pp.
Output signal level: 2.5 V pp
Max. output level before distortion: 15 V pp
IR ELECTRONIC VOLUME CONTROL Supply voltage: 18 VDC
PCB size: 185x60mm
GRAPHIC EQUALISER 12V DC
This is a stereo audio volume controller kit. It
has a built-in IR-receiver that enables one to
control the volume using an IR remote control. The 2-Channel IR Remote Transmitter
kit (AB299) (not included) will be suitable.
The enclosure is supplied with the kit. It is
suitable for PC or hi-fi applications. It can be
placed next to existing units like CD, DVD
player, ...
Specifications:
IR control of volume: up / down (mute)
‘Mute’-function with auto fade-in
02.27
A graphic equaliser with five bands over the
audio spectrum. A must for those who wish
to listern to real hi-fi sound and want the
best frequency response with a minimum of
distortion. Ideal for the car.
Working voltage: 12V DC
Current: 100mA
Adjustment Frequencies: 60, 250, 1000,
4000, 16000Hz
PCB size: 145x48mm
MONITOR AND EFFECTS FOR
AUDIO MIXER
mount them separated from each other in a
housing.
Output: max. 3V
Frequency: 20 to 20000 Hz
ACTIVE STEREO PRE-AMPLIFIER
MODULE 8 TO 50VDC
Monitor mixer amplifier (mono). Parametric
equaliser with controls for attenuation, centre
frequency and bandwidth to prevent microphone ’howl’. Effects mixer amplifier with
output level control. Effect return control to
mix the processed signal directly into the
master output, without using an additional
input channel.
Specifications:
output level : 0.775 / 1.5 / 2.5Vrms
center frequency : 100Hz to 10KHz
Q-factor : 0.4 to 2.5
attenuation : 0dB to 30dB
PCB dimensions : 58 x 203mm
DAUL INPUT AMPLIFIER
FOR AUDIO MIXER
Two input amplifiers, each may be built as :
- Mono microphone input, symmetric or
asymmetric
- Mono line input, symmetric or asymmetric
- Stereo line input
- Stereo phone input
Each amplifier has one gain control (±25dB).
Specifications:
two stereo channels
gain adjustment : 25dB
signal to noise ratio : > 80dB
total harmonic distortion : < 0.05%
frequency response : 20Hz to 20KHz (0.5dB)
RIAA correction : > 1dB
STEREO MIXER UNIT
It is possible to mix up 3 stereo signals and
to adjust each channel separately. Each
stereo channel has been mounted at an own
printed board. Therefore, it is possible to
STEREO TONE CONTROL
This stereo-tone-control may be connected
in front of the output-amplifier.
Treble, bass, and volume are separately
adjustable.
Operating voltage: 9 - 18 volts.
KARAOKE
This is a true hi-fi pre-amplifier module with
the following features:
Balance Range: greater than -40dB
Bass Filter: from 40dB cut to 20dB boost
Treble Filter: from 15dB cut to 15dB boost
Selectable filter contour
Protected input and output
High gain, low noise
The amplifier’s internal voltage is kept
constant by an on-board voltage regulator,
therefore the amplifier’s performance is not
effected by varying supply voltage
Specifications:
Volume Range: -90 to +23dB
Input Sensitivity: 100mV input for full output
Maximum Input Voltage: 2.5Vrms
Maximum Output Voltage: 3Vpp
STEREO PREAMPLIFIER AND
TONE CONTROL
This stereo preamplifier kit with tone control
makes use of the Philips TDA1524A.
It provides up to 20dB of voltage gain for
both channels, +/-15dB of bass and treble
control, left/right channel balance and selectable loudness contour. It is able to drive
most power amplifiers.
Specifications:
Supply Voltage: 12V battery/15Vdc adaptor
Supply Current: 50mA min.
Input Voltage / Gain: 300mV / Gain = 20dB
3Vrms / Gain = 0dB
Output Voltage: 3Vrms
Output Impedance: 300 Ohm
Frequency Response -1dB: 10 - 50 000Hz
Bass boost/cut: 15dB at 50 Hz
Treble boost/cut: 15dB at 15 kHz
Dimensions: of PCB is 67 x 114mm
assembled height: 25mm
02.28
Features:
Sing along with your favourite music
hook-up the unit between your CD-player,
MD-player or any other line-level source and
your amplifier
RCA input and output sockets
it has a 6.35mm microphone jack that fits
most microphones
adjustable microphone level
“vocal reduction”-switch reduces original
vocals on most stereo recordings
on/off switch and LED power indicator
Specifications:
GUITAR TREMOLO 9V DC
This is a TREMOLO with professional specifications. It creates fantastic effects with any
electric guitar. It has a variable tremolo frequency (1-12 Hz) and adjustable modulation
level from 0 to 90 % which makes it very
versatile and suitable even for professional
guitarists. It operates off a 9V battery which,
as the circuit has very low consumption will
last for a quite long time.
Supply voltage: 9V DC
Consumption: 5mA
Tremelo frequency: 1 - 20Hz
Frequency responce: 10Hz - 16KHz
PCB size: 100x50mm
LIGHT EFFECTS
FIXED LED
DECORATIVE SHAPES
TRAFFIC LIGHT
FLASHING HEART
MANUFACTURER CODE: MK116 /
MMK116
83 LED ANIMATED BELL
The kit flash 30 super-bright, red LEDs in a
variety of different patterns. The patterns are
read from a lookup table in a micro-controller. Electrically both circuits are the same;
it is only the lookup table and the physical
layout of the LEDs which is different. These
circuits would be impossible using normal
ICs. Both circuits are used with permission
from the designer, Les grant. All source code
is provided.
This kit is a multicolour bell. There is no
need to remove the battery when using an
external supply. Operating Voltage of 12V
makes it possible to use in cars, lorries,
FLASHING LED SWEETHEART
trucks. On/off switch is included.
Specifications:
Power Supply: 9 to 12Vdc or 9V alkaline battery (not included)
FLASHING STAR 12V
This kit is a miniature traffic light as used on
four-way junctions. It operates realistically
with an adjustable delay. It uses 12 LEDs. It
is great for model railroads, exhibitions, as a
toy, ...
Specifications:
ON/OFF switch
HALLOWEEN PUMPKIN
Show your love in an original way and also
that your heart still beats faster for him or
her. This kit uses 28 LEDs to form 2 blinking
hearts, one within another.
Specifications:
Supply Current: 8mA
RIDING SANTA
Features:
This kit uses 25 LEDs, bright-coloured
pumpkin-shape, Halloween gadget
it has a random flash effect that simulates a
flickering candle
contains 1 extra high intensity yellow LED
that illuminates the pumpkin
on/off switch
Specifications:
Features:
This kit is a 126 LED multicolour animated
Xmas gadget. There is no need to remove
the battery when using an external supply.
Operating voltage of 12Vdc makes it possible to use in cars, lorries, trucks. On/off
switch is included.
Specifications:
02.29
The kit flashes 30 super-bright, red LEDs in
a variety of different patterns. The patterns
are read from a lookup table in a micro-controller. These circuits would be impossible
using normal ICs. The circuits are used with
permission from the designer, Les Grant. All
source code is provided.
Power Supply: 12V
3D CHRISTMAS TREE
DE LUXE CHRISTMAS TREE
FIXED LED DECORATIVE
SHAPES USING SURFACE
MOUNT DEVICES
SMD LED STICK-ON-FLASHER
This kit is the ultimate Christmas gadget.
Features:
It uses 16 flashing red LEDs
contains extra green and yellow LEDs provided to customize your tree,
it can be hung on and powered with wires.
Specifications:
it will operate on 12VDC (e.g. in cars, ...)
Supply Current: 8mA
CHRISTMAS TREE 9V
Instructional construction set using SMD chip
construction parts. Included you will find a
very extensive and illustrated SMD introduction. When the parts are successfully solFeatures:
dered to the PC board, the result will be a
This kit makes a beautiful tree using 134
stick-on pin with an atomium motive and a
LEDs. 18 randomly blinking candles. There
LED alternating blinker, built up with modern
is no need to remove the battery when using SMD parts.
an external supply. Operating Voltage of 12V Operating voltage: 9 Volt Battery
makes it possible to use in cars, vans,
trucks. On/off switch is included.
Specifications:
SMD HAPPY FACE
MMK117
ELECTRONIC CHRISTMAS TREE
With 16 blinking LED’s. For decoration purposes.
Dimensions: 10 x 7.5cm
Christmas was never before so cheerful!
This kit really makes the difference. It uses
16 blinking LEDs.
Specifications:
Supply Current: max. 4mA
MMK100
02.30
Features:
This is a miniature size decorative gadget
it uses 2 LEDs that flash alternately
can be operated pending (cord supplied)
great to attract attention
ideal introduction to SMD (Surface Mounted
Device) technology
some extra parts are supplied, in case some
get lost or damaged
Hint: Use tweezers and a soldering iron with
a fine tip (25W max.) and thin solder wire.
Specifications:
Power Supply: 3Vdc Lithium button cell (e.g.
CR2025 or CR2032)
Supply Current: 9mA
Dimensions: Ø29 x 8mm
SMD FLASHING HEART
SIMPLE LED FLASHERS
FLASHING LEDS
JUMBO LED FLASHER
Features:
This is a miniature size decorative gadget
can be operated pending (e.g. around the
neck) or can be worn as a badge (pin supplied)
Device) technology
get lost or damaged
Specifications:
Power Supply: 3Vdc Lithium button cell (e.g.
CR2025 or CR2032) (not included)
Supply Current: 7mA
SMD CHRISTMAS TREE
Electronic flasher unit with a great 10 mm
light emitting diode. Ideal for decoration,
models etc.
Operating voltage: 6 to 12 V
Flashing frequency: 120 to 240 times per
minute
FLASHING LED 230VAC
A flash circuit with one red light emitting
diode Ø 5 mm which can be operated directly at 230VAC. Flash frequency: 2 Hz.
Usage: Control-lamp for devices and alarm
systems, start control for machines etc.
LED ALTERNATING FLASHER
This kit is useful for different applications
(such as model construction), and recreational. Adjustable flashing speed with two
potentiometers.
Specifications:
Supply Current: 8mA
TWO LED FLASHER
USING THE 555 IC
This kit makes use of the popular 555 IC. In
this kit it is used as an astable oscillator to
generate a square wave. It has 2 LEDs connected, to pin 3 of the IC, in such a manner
that one LED is always on while the other is
off. The two LEDs flash alternately. The duty
cycle and rate of flashing is adjustable.
Specifications:
LED FLASHER / 555 TESTER
9-12 VDC
Features:
This is a miniature size decorative Christmas
gadget
tree can be operated pending (e.g. from the
ceiling or Xmas tree) or can be worn as a
badge (pin supplied)
Device) technology
get lost or damaged
Specifications:
Power Supply: 3V Lithium button cell (e.g.
CR2025 or CR2032)
Supply Current: 5mA
This kit has one red and one yellow LED
(light emitting diode) that flash alternately.
The flashing rate is adjustable. It can be
used to make a dummy alarm, for flashing
adornments, display boards, etc.
Specifications:
Supply Current: 20mA max. at 12Vdc
Adjustable Flashing Rate: 2.5 - 5Hz
02.31
A useful project when you need a flasher like
in alarm systems, warning devices, indicators, signaling, toys and more. The circuit
uses the well known 555 TIMER IC and
besides all its other applications it can be
used as a tester for the 555 IC.
Power supply: 9 to 12VDC / 30 mA
DUAL WHITE LED STROBOSCOPE
INCANDESCENT
LAMP FLASHERS
FLASHER 6 TO 12V 100MA
Features:
It uses two super bright white LEDs
powerful flash effect
great for party’s, in scale models, to attract
attention, to observe moving parts, etc...
slow/fast selector switch and speed adjusting
knob
speed is adjustable between approx. 1 and
60 flashes/second
on/off switch
Specifications:
DUAL SUPERBRIGHT FLASHING
RED LIGHTS
Electronic flasher unit for glow lamps 6 to
12VDC maximum 100mA. Also suitable as
alternating flasher.
Flashing frequency: 1 to 3 times per second.
Ideal for usage within miniature constructing!
Together with the additional kit FB631 relay
card (not included in this kit) it is feasible to
operate flashers with loads up to 6 Ampere
current consumption!
FLASHER 4.5 TO 12V
Electronic flasher unit for one or several
glow lamps. Adjustable flash period: approximately 1 to 3 times per seconds. Usage: for
miniature builders, as bicycle blinker, flashing brooch etc.
Operating Voltage: 4.5 to 12 Volt
Maximal current load: 100mA
Suitable as flasher or alternating flasher.
Specifications:
Operating voltage: 6 - 12 Vdc
Operating mode: flasher or alternating flasher
Output: 2 outputs each for max. 300mA
Flash sequence:
approx. 2 - 3Hz (120 - 180 per minute)
Flashing / rest ratio: 50 : 50
(without fixing straps)
FLASHER FOR 1A LAMPS
MODULE 5 - 12VDC
Electronic flashing device for glow lamps up
to max. 1A current load.
Flash / rest ratio: 50 : 50
Specifications:
Operating voltage: 5 - 12Vdc
(depending on the connected lamp)
max. Current of the lamp: 1A
Flashing Rate: 2 - 4Hz
(120 - 240 flashes per minute)
LIGHT SWELLER 12VDC
MODULE 24W MAX.
ALTERNATING FLASHER FOR
2 SMALL LAMPS
Features:
This kit uses two super bright red LEDs
very powerful flash effect
it may be used for emergencies, warning
signs, as an eye-catcher, ‘alarm-active’ simulation, etc ...
it can be set to turn on at dark with
adjustable sensitivity
on/off switch
Specifications:
(12V is possible)
Flashes up 2 lamps or lamp groups alternating (max 100mA 4.5 to 16V). Adjustable
flash period. For miniature construction!
FLASHER FOR SMALL LAMPS
MODULE 6 - 12VDC
This light sweller regulates incandescent
lamps (halogen lamps, too) slowly from
"dark" to "light" and back again in continuously recurring succession. It is like a flasher, apart from the fact that the lamps do not
blink but slowly become light and dark.
Swelling sequence: every 5 - 8 seconds
max. lamp Current: 2A
LAMP POWER FLASHER
12 VDC / 40WATT
A power flasher suitable for alarms, warning
devices, car hazard lights, signaling devices
and more. It uses a power transistor to drive
It is possible to connect small glow lamps up the lamp and solid state circuitry to provide
to a max. current load of 300mA.
the necessary pulses which turn the lamp on
02.32
and off.
Supply voltage: 12VDC
Max. current: 4A
Max. Load: 50W
Flash rate: 40-90 flashes p/minute
SLOW FLASHER
MODULE 110/230VAC
8 LED MULTI SEQUENCE FLASHER
LIGHT PULSE DEVICE 230VAC
This is a versatile LED or filament bulb flashing kit. It is designed to make use of a
PIC16F84A microcontroller from Microchip.
This mains flasher has an adjustable flashing
The microcontroller is preprogrammed and
period: 0.6 - 9 seconds turn-on time.
the software can also be downloaded. The
For electric light bulbs up to 300 W / 230V
user can arrange the 8 LEDs in a pattern
Specifications:
they want. The brightness of each LED conThe kit is suitable as a flasher for alarm sys- Supply Voltage: 110 - 240Vac
tinually varies between fully on to fully off.
tems or for disco units using 230V light bulbs Rupturing capacity: for electric light bulbs
Flashing appears to be random. There are 5
(max. 880W). The flash rate is adjustable
110V up to max. 150W
switches used to select from up to 32
between approximately 0.5Hz up to 10Hz.
230V up to max. 300W
effects. Supply Voltage: 9 - 12Vdc
Technical data:
Minimum Power Load: 15W
Outputs: 8 x transistor open collector type
Supply voltage: 230VAC
Safety Fuse: installed 1.6A slow-blow
max. 0.5A / 45Vdc each
Load: Maximum 880W (4A)
Flashing Period:
PCB size: 35x35mm
On-time: 0.6 - 9 seconds (djustable)
Off-time: 50% of the on-time
FIVE LED MULTI SEQUENCE
FLASHER (COB/PCB)
POWER BLINKER 230VAC
FLASHER MODULE 230VAC
This is a 2-channel running light. This 2channel running light can flash alternately 2
lamps or lamp groups.
This blinking kit is designed for the activation Flashing Period: 0.5 - 1 second
and deactivation of 230Vac loads. It is ideally Specifications:
suited for steering e.g. disco lights, safety
Supply Voltage: 230 - 240Vac
signs, light bulbs, low-voltage halogen light- Channels: 2
ing with wirewound transformer, etc ...
Power Rating: max. 500W per channel
The on and the off durations can be adjusted Flashing Frequency: 1 - 2Hz
separately. The load can be resistive and
slightly inductive.
Specifications:
Noise suppressed according to EN55015
RUNNING LIGHTS
Load Current: 3A max. fused
Power Output: 500W / 200VA max. 240Vac
FIVE ULTRA BRIGHT LED FLASHER
Adjustable ON and OFF durations:
3 VDC
ON-time adjustable: 50ms and 2.5s
OFF-time adjustable: 0.5s and 15s
Two Indicator LEDs for ON and OFF states
Module Dimenions: 106 x 101 x 44.5mm
Weight: 172g
MODULE ORDER CODE: GC114
Five LEDs flash on and off in a random
sequence or sequential mode depending on
whether a switch is open or connected high.
Continuous flashing mode or toggle on/off is
selectable by another switch. The kit uses a
small chip on board PCB. A trimpot is used
to adjust the flashing rate. Motherboard supplied to mount all components.
Power supply: 3VDC (battery holder included)
Operating current: 10-16mA
PCB size: 39x30mm
02.33
Five Ultra Bright LEDs flash in seven patterns. The modes can be cycled through
using an on-board switch. When the desired
flashing pattern is found just leave the switch
and the pattern will remain flashing as long
as power goes to the board and the switch
remains set. Flash rate can be adjusted.
Power Supply: 3VDC (Battery holder included)
PCB Size: 40x30mm
COB PCB: 30x15mm
LED RUNNING LIGHT
This kit uses 8 LEDs. Different LED running
effects are selectable (PROG push button).
Adjustable effect speed (SPEED potentiometer). Power stand-by push button (OFF push
button).
Specifications:
MINI TRAFFIC LIGHT
This is a mini traffic light kit. It has 3 LEDs:
one green, one red and one yellow. After
connecting the power it takes a few seconds
before the LEDs start flashing sequentially,
one after the other. It is possible to connect
up to 12 LEDs to the circuit using 4 of each
colour. The additional LEDs are not included.
Specifications:
Supply Current (using 3 LEDs): 350mA at 6V
Optional: (not included)
LEDs: Green 3 x (HB075), yellow 3 x
(HB076), Red 3 x (HB074) together with
Resistors: 150 Ohm 9 x (DB046)
3-CHANNEL RUNNING LIGHT
230VAC
The running speed is adjustable. Each channel max. 500 Watt. It is possible to connect
single-lamps, light strings, or lamp combinations. Usage: For light effects in discotheques, shops, etc.
230VAC
This running light kit is the perfect addition to
your existing lighting system if you want to
create the kind of effects used in a disco. It
makes use of microprocessor technology.
The speed of this module can be adjusted
manually. Each of the four outputs has a
LED indicator.
230VAC + 12VDC
Specifications:
Load Current: 2A max. fused
Channels: four 230Vac / 2A outputs
Maximum Channel Output Power:
400W / 100VA max. 230Vac per channel
Flashing Rate: 0.2 to 3 times / second
MINI RUNNING LIGHT 9 - 12VDC
Weight: 177g
This digital 4-channel running light controls 4
different lamp outputs one after another and
in regular intervals, lighting up the corre4-CHANNEL MULTI-FUNCTION
sponding lamps one after another. The
RUNNING LIGHT 230VAC
velocity is adjustable. The device works with
fullwave control.
For 230VAC glow lamps, max. 100 Watt per
This mini running light has 3 small light bulbs output
and the running velocity is adjustable. It is
Operating Voltage: 12VDC and 230VAC
ideal for model construction, indication plates
etc. It requires a supply voltage between 9 MANUFACTURED BY: KEMO
12VDC.
MODULE 230VAC
This kit does more than an ordinary running
light: it not only runs in both directions, but it
6 TO 24V
also flashes with two groups of lamps (flipflop) and with all the lamps at the same time.
The four light effects follow each other automatically. This device can be synchronised
with mains frequency or it can work asynchronously. The running speed is fixed in
synchronous mode and it can be adjusted in
asynchronous mode. Radio interference is
only suppressed in synchronous mode.
This running light makes 4 lamps or lamp
Specifications:
groups light up one after the other at regular Supply Voltage: 220Vac
intervals and go out again. The running
4 Triac Outputs: max. 2A / 220Vac each
speed is adjustable: 20 - 200 cycles per
Output Power: max. 400 Watt per output
minute. For incandescent bulbs up to 300
Adjustable running velocity, operating voltwatt
maximum
per
channel
(maximum
total
age depends on the voltage of the lamps
output: 1200W).
connected. Each channel may be loaded
Depending
on
the
connection,
the
module
max. 3 Amps. The operating voltage of the
may be used for various applications:
ATOMIUM
board depends on the lamps used in the
For luminous advertising in shop
mounting. For example, when using a 12V
windows, for exhibition stands or light
lamp, the running light should be operated
warning signs.
through 12V.
Specifications:
Supply Voltage: 230 Vac
Channels: 4
Power Load per channel: max. 300 Watt
Runnig speed: adjustable
An especially decorative device, 6 yellow
02.34
LED’s (electrons) rotate around one red LED
(atomic nucleus) optically. Ideal as adornment, identity disc, clothes-pin, etc.
DISCO LIGHT EFFECTS
XENON TUBE FLASHER 6VDC
STROBOSCOPE 220VAC
LED RUNNING LIGHT
10 CHANNELS
Electronic running light with 10 light emitting
diodes. The running velocity of the kit is
adjustable. For usage in decorations, warning advices etc.
This Kit builds the circuit to trigger a high
voltage xenon flashtube using a 6 volt DC
input from a power supply. The flashrate is
fixed but we explain how you can vary it by
changing resistor and / or capacitor values.
XENON TUBE FLASHER 12VDC
Flashing light effects for discos. Make your
own snapshots and "lightning" light effects. It
has an adjustable flashing rate.
Specifications:
Adjustable Flashing Rate: 2 - 20 flash / sec.
DUAL FUNCTION STROBE 220VAC
RUNNING LIGHT
0.1A X 10 CHANNELS 12VDC
A 12V battery powered xenon tube flasher.
The flash rate is adjusted by a trimpot. The
frequency of the flash rate can be adjusted
from about once every 2 seconds to about 4
per second. The kit is useful for runners or
cyclists to aid in their visibility. The step-up
transformer is supplied with the kit. Full
instructions are provided.
Power supply: 12VDC
This high power, strobe light kit creates fantastic light effects for disco, photographics,
signalling, etc... It has two operating modes.
The first mode flashes the strobe on power
down. It is ideal for using together with the
Light Computer kit (GC069) or with the kit
Adjustable running speed. You may connect
DISCO STROBE LIGHT 230VAC
4-Ch. Multi-function Running Light (GC068)
small incandescent bulbs or light emitting
The second mode flashes continuously with
diodes (individually or in groups) up to a total
adjustable flashing rate. Simple screw termioutput of 100mA per channel. Ideal to use
nal power connections. High power, linear,
for: Decorative illumination of paintings, toys,
Xenon flash tube. Power on LED. A reflector
model systems (e.g. model airports for the
is also supplied with this kit.
landing area lighting), etc.
Specifications:
10 CHANNEL RUNNING LIGHT
3W on standby
Flashlight-stroboscope with U-flash tube and
Fuse Protection: 20 x 5mm 250mA in holder
9VDC + 230VAC
large charging capacitor for bright flashes.
Maximum Flashing Rate: 20 flashes per sec.
The speed of the flashes is adjustable
approximately 1-10Hz. Ideal as light shows,
discos or special effect photography.
PCB size: 60x62mm
LASER SHOW 6VDC
DISCO / WARINING STROBE LIGHT
220VAC
This digital 10-channel running light controls
10 different lamp outputs one after another
and in regular intervals, lighting up the corresponding lamps one after another. The
velocity is adjustable. The device works with
fullwave control.
For 230VAC glow lamps, max. 100 Watt per
output
Operating Voltages: 9VDC and 230VAC
The best of all light effects, previously available only as professional equipment for discos, now available to amateur constructors
at a very reasonable price. A 200/240V
xenon flash tube exactly like those found on
aircraft, signal beacons and discos is included. The flash tube is rated for 2 000 000
flashes.
Supply voltage: 220 VAC
Strobe frequency: 0.3 -3Hz
02.35
With this laser show many different geometric figures can be projected onto a wall by
means of a laser. With the two controllers
you can regulate two reflecting motors via
the installed electronics so that many different figures can be shown. (Requires a laser
module Code: FB110).
Max. current: 0.3A
PCB size: 100x74mm
board, tactile, push-button switches. Lowvoltage (24Vac) control circuit for extra safety. Each plug-in socket is fused.
LIGHT COMPUTER
Specifications:
Supply Voltage:
for control circuit: 24Vac
for plug-in units: 110 - 240Vac
Supply Current:
for control circuit: 300mA
for plug-in units: 2.5A fuse per plug-in unit
5 Separated plug-in unit channels
Input Current:
Relays are usually used to switch AC voltfor the five inputs that can be connected to
ages by means of an electronic control
open-collector outputs: 35mA per input
because of their simplicity. However, when
Push-button Control Current: 150mA
This is a light effects controller kit that has
switching occurs too frequently or too quickly LED Indicators:
sixteen different programs and seven triac
the life time of the relay contact points is
1 LED for 24Vac control circuit power
outputs. This kit can be used for party lightshortened considerably. This can be solved
1 LED for 230Vac mains power
ing, discotheques, advertisement lighting,
perfectly by replacing the relays with triacs.
5 LEDs to indicate active control signals,
signalling, etc. Each output is provided with
Using optocouplers for input isolation, the
one for each plug-in unit.
an indicator LED to view the programs
directly. The complete circuit can be installed entire, low DC voltage, interface network
remains electrically isolated from the AC
Optional:
so that the program selector, rotary switch,
Transformer: 12-0-12V 0.5A 12VA, (QB074)
and all the indicator LEDs are mounted on a voltage that has to be switched.
Specifications:
Push-button Switches: 5 x (GB723)
front panel. To enhance the spectacle furSupply Voltage: 9Vdc
ther, an unlimited number of circuits can be
connected together to work synchronously.
Two light computers can easily be cascaded Four Triac Outputs: 24 - 240Vac
MULTIFUNCTION RELAY MODULE
Output Current per Output: max. 1.5A
to have a combined 14 outputs. Only use
Four Opto-isolated Inputs
incandescent light bulbs with this kit. This
Four Indicator LEDs: shine when triac is on
device is not suitable for inductive loads.
Input Impedance: 820 Ohm
Specifications:
One Input per Triac Output:
Circuit Supply Voltage: 7.5 - 9Vac or 12Vdc
The ‘-’ input has to be pulled active low,
Circuit Supply Current: 250mA
(connected to the negative supply rail), to
Number of Outputs: 7
activate the corresponding indicator LED
Supply Voltage for the Lights: 24 - 240Vac
and triac when all ‘+’ inputs are 9 - 15Vdc
Current per Output: 1.5A max.
Triac is off if the input is not connected
Number of Programs: 16
Input Current: each input consumes 15mA
Adjustable Speed: 1 - 15 steps per second
when 15Vdc is connected across the
Input for external clock signal: 5Vpp
‘+’ and ‘-’ input terminals of each input
This is a programmable, multifunctional,
230Vac timer kit with an output relay switch.
10-CHANNEL LIGHT EFFECT
This kit is a plug-in unit for the Light Control
LIGHT CONTROL SYSTEM
GENERATOR 12VDC
System - Base Unit kit (GC075). It makes
-BASE UNIT
use of a preprogrammed microcontroller.
Two pre-programmed delays and learning
mode for delay times.The microcontroller
has EEPROM data storage to prevent memory loss if the power is removed. Functions
are selected with 4 on-board DIP-switches.
This kit has 14 different functions that
include timing, switching, flashing, interval,
random switching... On-board transient filter
for relay contacts or load (selectable). It is
suitable for controlling incandescent lighting,
halogen lighting, fluorescent lighting, fans,
This is a light effects generator kit. It has ten This is the base unit kit that is required to
valves, buzzers... This kit is also available as
different pre-programmed light patterns to
build your own domestic, modular, light con- a stand-alone version with screw terminals:
select from. It has ten outputs that can be
trol system. It has PCB mounted sockets
(GC102).
used to drive 12V light bulbs. It is ideal to
that can connect up to five plug-in controller Specifications:
use for advertisement lighting, party lights
units. Only the following plug-in units can be Supply Voltage:
and discos. There are two on-board pushused with this base unit kit:
110 - 125Vac or 220 - 240Vac 50 / 60Hz
button switches. One button is used for
“Multifunction Relay Module” kit (GC077), Maximum Output Current: 2.5A
selecting different light patterns and the
“Relay Output Module” kit (GC079),
2 Delay Times: each programmable for
other button can simultaneously switch all
“Dimmer Module” kit (GC076),
2 sec. up to 12 days
the outputs on or off. The speed of the dis“Slow On-Off Dimmer” kit (GC080)
Output Relay: 2.5A / 220Vac contact rating
play can be adjusted with an on-board preEach plug-in unit has three different inputs.
Transient Filter for the relay contacts
set potentiometer. There is a LED indicator
This base unit has five inputs that can be
for each output.
connected to open-collector transistor outKIT ORDER CODE: GC077
Specifications:
puts from controlling kits like:
“User-definable 8-Channel Touch Panel”
kit (AB304),
10 Selectable Programs
“10-Channel, 2-Wire Remote Control”
10 Outputs:
kit (GC057),
voltage per output: 12V
“15-Channel IR Receiver” kit (AB306),
current per output: 400mA max.
“PC Interface Board” kit (GB693)
There are five push-button switch inputs that
are optically isolated. The push-button
switches are not included. There are five onMANUFACTURED BY: VELLEMAN
QUAD TRIAC SWITCH CARD
02.36
Features:
This kit makes use of white LED technology
it uses 2 high-power LEDs (4500mcd)
SLOW ON-OFF DIMMER
estimated LED life: > 100.000 hours (more
than 11 years at a stretch!)
low power consumption
can run up to 10 hours on a single battery
(test conditions: 15s ON, 60s OFF continuous for 7 hours/day)
automatic battery management for efficient
use of battery power
built-in strobe effect for emergencies, can be
used to attract attention, ...
Specifications:
Power Supply: 12V battery e.g. (DB247)
(battery not included)
This is a 230Vac relay output switch that is
suited for both resistive and inductive output
Weight: 31g (with battery)
loads. This kit is a plug-in unit for the Light
This is a dual mode, 230Vac light dimmer kit.
Control System - Base Unit kit (GC075). If
This kit is a plug-in unit for the Light Control
this kit is used as a stand-alone unit then it
can be activated by an external push-button System - Base Unit kit (GC075). It makes
use of a preprogrammed microcontroller. It
switch or an open-collector output from a
SOUND TO LIGHT
has two pre-programmed delay times and a
controlling circuit. This kit has a transient
learning
mode
for
independently
changing
suppressor to reduce sparking across the
MODULATORS
the delay times. The microcontroller has
relay contacts.
EEPROM data storage to prevent memory
Specifications:
loss if the power is removed. Modes are
Supply Voltage: 110 - 240Vac 50 / 60Hz
LOW VOLTAGE LIGHT ORGAN
selected with 2 on-board DIP-switches.
Maximum Output Current: 2.5A / 220Vac
Mode 1:
LED Indicator: shines while relay is powered This mode simulates a ‘regular’ dimmer. The
light level is slowly increased from off to fully
on during the first time delay. The dimming
direction is changed every time the pushMANUFACTURED BY: VELLEMAN
button switch (not included) is pressed. After
the button has been pressed the second
DIMMER MODULE
time delay starts and the light level slowly
decreases until the light is off at the end of
This kit operates at safe voltage level (not
this delay. The light level can also be set
mains voltage). It makes lamps flash to the
manually and saved.
rhythm of the music. Usable for halogen
Mode 2:
bulbs. It receives its input signal (optically
The light switches fully on after the button
isolated) directly from a speaker. Adjustable
has been pressed and stays on for the dura- sensitivity. Can be used in the car, if the
tion of the first time delay. The second time
lamps are isolated from the chassis.
delay starts immediately after the first time
Specifications:
delay has ended. The light level starts to
Input Sensitivity: 2W to 60W
decrease, at the start of the second time
Power Supply: 12V to 24V DC or AC
delay, until the light is off at the end of this
max. load: 50W / 12V or 100W / 24V
delay. This kit has a soft start function that
extends the life of the bulbs. It is not suitable
for low voltage halogen lighting or electric
This is a 230Vac light dimmer kit. This kit is
transformers.
a plug-in unit for the Light Control System SIMPLE 1 CHANNEL LIGHT ORGAN
Specifications:
Base Unit kit (GC075). This kit is used for
Supply Voltage:
increasing and decreasing the brightness of
110 - 125Vac or 220 - 240Vac 50 / 60Hz
mains power light sources. A brief push of a
Maximum Output Current: 1.3A
single push-button (not included) toggles the
Maximum Output Power:
light on or off, while continually pushing it will
150W at 120Vac or 300W at 230Vac
start the dimming function. The dimmer has
Noise is suppressor according to EN55015
a non volatile memory that saves the last
light level setting before being switched off. It
1 sec. up to 1 hour
has a soft start and automatic turn-off funcDimensions: 67 x 57, 25mm height
tion that extends the life of the bulbs and
saves energy. It can be used for low voltage
(12V) halogen lighting only if it is used
together with a suitable wire-wound 230 to
This kit receives its input from a loudspeakWHITE LED FLASHLIGHT
12V step-down transformer.
er. It modulates a lamp according to the
Specifications:
music signal at the input. The input is optiSupply Voltage:
cally isolated from the loudspeaker.
110 - 125Vac or 220 - 240Vac 50 / 60Hz
Adjustable sensitivity.
Specifications:
Maximum Output Power:
Input Sensitivity: 2W to 60W
170W at 115Vac or 350W at 230Vac
max. load: 120W at 120Vac and 230W at
Transient Suppressor: used to avoid radio /
230Vac
TV interference according to EN55015
Maximum Phase Shift: 30 degrees
(when powering inductive loads at output)
Dimming Speed: approximately 5 seconds
Automatic Turn-off Time: 12 hours
RELAY OUTPUT MODULE
02.37
MUSIC TO LIGHT WITH
OPTO-COUPLER 230VAC
nels with 6 LEDs each that will respond to
different frequencies to create a beautiful
light effect. Add colour to your car’s interior
with this easy to build project.
3-CHANNEL LIGHT ORGAN
3 CHANNEL MUSIC TO HALOGEN
LAMPS 12VAC
A music-to-light modulator is a circuit which
controls the intensity of one or more lights in
response to an audio input. The kit is ideal to
give the rhythm to any party or disco without
much money. It uses an opto-coupler as a
coupling device between the audio and the
mains controlling stages of the circuit.
Operating voltage: 230 VAC
Power handling: up to 250 Watts
Input sensitivity: 2-60 Watts
SOUND-TO-LIGHT UNIT
This is a 3-channel music to light kit with a
stylish enclosure. The three channels are for
the low-, mid- and high-frequency ranges of
music. It receives sound waves with a builtin microphone. You can adjust the microphone sensitivity with the master level control knob. The output level for each channel
With this light organ it is possible to connect can be adjusted independently of each other.
12V halogen lamps up to a maximum of 300 This device is only suited for incandescent
light bulbs.
Watt (100W per channel). Each channel is
independently adjustable. To be used only at Specifications:
a 12V-transformer (alternating voltage), not
Maximum Power Output per Channel: 200W
for DC-voltage.
LED Indication: 1 power-on LED
3 testing LEDs, one for each channel
MUSIC TO LIGHT MODULE
3 CHANNEL 230VAC
Not Included:
1 power plug for 230Vac (AA280)
3 European 2-pin AC plugs: 3 x (GB830)
3 lights from (AA977, AA978, AA979, AA980)
3 lampholders: 3 x (EB276)
power cable (AA498) length as you require
MUSIC TO LIGHT 4 CHANNEL
WIRELESS 230VAC
This 3 channel music to light module has
three pre-fixed channels. The module creates a special play of light full of life. The
This kit, which uses four high-intensity LEDs controller is also programmed with alternating effects. It has to be wired to a speaker
and a microphone, lights up and reacts
output.This device requires an additional
simultaneously on every sound. It may be
used for different funny and practical applica- 2Watt, wire-wound potentiometer 100 - 250
Ohm (not included)
tions, such as: sound indicator, simple
sound-to-light unit for music, for the hearing Power supply: 230 VAC
Power Rating: max. 1500W (500W/230Vac
impaired: can be used to indicate the teleper channel)
phone, doorbell. Input sensitivity is
adjustable with a potentiometer.
Specifications:
WIRELESS 12VDC + 230VAC
MUSIC TO LIGHT FOR THE CAR
12VDC
Bring something of the atmosphere of a
disco in your car with this fascinating light
effect. The circuit has three different chan-
A music to light kit with mircophone pick-up,
therefore there is no need of connection to
an amplifier. Each channel is individualy
adjustable. Can handle a maximum of
1000W / 230Vac per channel.
Supply voltage: 12VDC and 230V for the
light bulbs.
PCB size: 66x60mm
02.38
A four channel music to light modulator that
can be used with any sound source, as it
requires no electrical connection with the
amplifier. The kit includes a microphone that
is used to pick up the sound waves. Each
channel has a separate sensitivity control. It
is ideal for parties and discos.
Specifications:
Output Power: 4 x 300W max.
Channel Frequencies:
500Hz, 1kHz, 5kHz and 10kHz
PCB size 114 x 39 mm
MANUFACTURED BY: ELECTRONICS123
230VAC (MONO OR STEREO)
On / Off slide switch
Built-in Microphone: senses audible sound
Volume Indication: 5 LEDs light up sequentially (bar display) with increased volume
Designer Enclosure: is supplied with an
adjustable sensitivity knob
LED-RECORDING
LEVEL INDICATOR 12VDC
Each channel can be adjusted separately. It
is feasible not to connect lamps of more than
500 Watt per channel. Extremely high input
sensitivity. Ideal for discos.
Total load: 3000W
PCB size: 70x100mm
AUDIO SIGNAL
LEVEL INDICATORS
POCKET VU METER
DUAL STEREO VU METER
An almost inertia-free measuring instrument
with a 5-LED indicators. Perfect as a recording level indicator for amplifiers or loudspeaker enclosures. The kit is also suitable
for use as a volt or ampmeter.
Technical data:
Indication: 5 LEDs
PCB size: 44x23mm
LED-VU-METER-11 LED’S
Surprise your friends in the disco. 5 LEDs
move to the rhythm of the music. This kit
uses 5 bright, red LEDs and a microphone.
Adjustable input sensitivity.
Specifications:
Power Supply: 3V disk type CR2032 battery
(AB018) (not included)
Supply Current: 10mA maximum
POCKET VU METER
BUILT INTO ENCLOSURE
This is an 11-LED, voltage level indicator kit
that is almost linear. It accepts DC and AC
input voltages. The left-most, green LED, is
continually lit while this device is powered.
The remaining 10 LEDs indicate the input
level in bar graph style. Minimum level is
indicated at the second green LED and maximum level at the last red LED. The input
sensitivity can be adjusted.
Specifications:
Input Voltage Range at Maximum Sensitivity:
0 to 1.5Vdc max. (all LEDs on at 1.5V)
LED-VU-METER 30 LED’S
This is a pocket-sized VU-meter kit. The
pocket VU-meter, (EB524), has been so successful that this version of the kit was made
with an attractive enclosure.
Specifications:
Power Supply: 3V disk type CR2032 battery
to 0V), or disconnected. As the input level is
increased the LEDs light up sequentially,
only one LED is on at a time, in a clock wise
direction. The maximum level is indicated by
the bottom-right LED. The input level is displayed in “dot mode”. The input sensitivity
can be adjusted.
Specifications:
Supply Voltage: 8 -16Vdc
30 Green LEDs
Maximum Input Voltage: 50Vdc
Input Voltage Range at Maximum Sensitivity:
0 to 9Vdc max. with 12Vdc supply voltage
This is a 30-LED, voltage level indicator kit
that is almost linear. It accepts DC and AC
input voltages. The LED, at the bottom-left,
is lit when the input is grounded, (connected
02.39
If all inputs of the mixer panel are to be
viewed or pre-adjusted, then this is indispensable. This module contains 2 stereo VU
meters with 2 x 5 LED indicators and can be
used with the 6 or 12 channel mixing panel.
May also be used with other equipment, to
indicate the output level of an amplifier.
Specifications:
indication : -13, -8, -3, 0, +3dB
sensitivity : 0dB = 0.775Vrms (easily
adjustable)
supply voltage : 14 - 18VDC / 62mA
MONO VU-METER 10 LEDS
VU meter with a audio power level scale
consisting of 10 LEDs. It has adjustable
input sensitivity. Dot or bar display. Supplied
with 1 front panel suitable for horizontal or
vertical mounting.
Specifications:
Scale: -20, -10, -7, -5, -3, -1, 0, 1, 2, 3dB
Frequency Range: 20Hz - 30kHz
Input Sensitivity: (select only 1 of 2 inputs)
Low Input: 150mV to 6Vrms with
47 kOhm input impedance for LINE levels
High Input: 1.5V to 60Vrms with
470 kOhm input impedance
STEREO VU-METER 2 X 10 LEDS
Stereo VU meter with two audio power level
scales with 10 LEDs each. It has adjustable
vertical mounting.
Specifications:
Scale: -20, -10, -7, -5, -3, -1, 0, 1, 2, 3dB
Frequency Range: 20Hz - 30kHz
STEREO VU-METER 2 X10 LEDS
A simple, low cost stereo VU meter. Two
LM3915 dot/bar display driver ICs are used
to drive 2 rows of 10 LEDs (14 green, 6 red)
in a moving bar display. Each row of LEDs
spans a power range of 0-30 dB in ten 3-dB
steps. This VU meter indicates “peak music
power” when used with audio amplifiers.
Ideal add-on for any of the amplifier kits.
Dimensions: 65mm x 42mm.
PRECISION STEREO VU METER
2 X 15 LEDS
2000Wrms. It does not require a special
power supply as it is powered directly by the
speaker output. Ideal for use with car audio
systems and PA systems. Also usable for
bridged amplifiers. A front panel and four
attractive front scale stickers are supplied
with the kit.
Specifications:
Selection of 4 different scales:
1) 4 Ohm load in Low Power Mode:
0.3 to 400Wrms
2) 4 Ohm load in High Power Mode:
10 to 2000Wrms
3) 8 Ohm load in Low Power Mode:
0.15 to 200Wrms
4) 8 Ohm load in High Power Mode:
5 to 1000Wrms
Minimum Input Voltage: 1.1Vrms (in Low
Power Mode)
Maximum Input Voltage: 130Vpeak (in High
Power Mode)
Current Consumption: 25mA at full scale
Luminous Intensity of LED: 8 to 20mcd
STEREO LED-VOLUME INDICATOR
STEREO LED POWER DISPLAY
MODULE 5 TO 20 VDC
Stereo VU meter with two audio power level
scales with 15 LEDs each. It has adjustable
vertical mounting.
Specifications:
This colourful, stereo indicator can give an
Scale: -23, -13, -10, -8, -6 and
accurate display of the amplifiers output
-4, -3, -2, -1, 0, 1, 2, 3, 4, 5dB
power once calibrated. It will enhance the
Accuracy: ± 0.5dB (at 1kHz)
amplifiers appearance or look good mounted LEDs: 10 green, 2 yellow, 3 red per channel
into the dashboard of your car. The units
Frequency Range (-3dB): 20Hz - 30kHz
inputs are directly connected across the
speaker outputs of the amplifier. Inputs can
be connected in parallel for mono amplifiers.
A separate DC supply powers this unit. It has
no effect on amplifier performance. The
power range (sensitivity) is adjustable. Red, PCB Dimensions: 150 x 57mm
yellow and green LED display.
Specifications:
Single Supply Voltage: 5 to 20Vdc
MONO AUDIO POWER METER
Supply current: max. 250mA
Audio Power Range: 25 to 150 Watts
Load Impedance: 4 - 16 Ohms
This audio power meter kit has a 10 level
LED scale and can measure up to
02.40
Almost inertialess volume indicator for amplifier units from 2 to 100 Watt. Indication is
realised through 22 LED’s (2 x 11 LED).
Easy connection with the loudspeakers.
Operating voltage: 12 V
FIXED MESSAGE
LED DISPLAYS
20CM LED DISPLAY
“COMMON ANODE”
This kit makes a single digit, 7-segment LED
display. It consists of 12 LEDs per segment
and 4 LEDs for the decimal point. There are
8 inputs with a common ground (0V) connection. Each input has to be pulled high, relative to ground, to activate the corresponding
segment.
Specifications:
Supply Voltage: 22 - 26Vdc (non-regulated)
Current per Segment: (static) 40mA
(multiplexed): 75mA
Total Current in static mode: 400mA max.
20CM LED DISPLAY
“COMMON CATHODE”
luminous letters Kit FB634.
Operating voltage: 12 to 15 V
Connecting outputs: 4, each max. 5 A
VARIABLE MESSAGE
DISPLAYS
LCD MINI MESSAGE BOARD
ADVERTISEMENT LED DISPLAY
WITH RED LEDS
Create your own message for personal
advertisements. The kit includes 12 self
definable characters, which are made by the
customer. 150 bright LEDs are supplied with
the kit. Many spectacular light effects on the
message (scrolling, blinking, rolling, panning
This kit makes a single digit, 7-segment LED etc). Adjustable effect speed. Vertical or horidisplay. This kit has the same specifications zontal position possible. Fixed displaying is
as (GC084) except that this kit is a common possible (no effects). Different displays can
cathode display.
be synchronized, to create longer messages
or to create giant advertisements.Please
note that this display is not programmable.
Specifications:
LUMINOUS LETTERS
Supply Voltage: 12 to 28Vdc
150 Bright Red LEDs: 60 - 80mcd max.
Number of Characters: 12
5 x 7 LED matrix for each of the characters
Oscillator output for synchronisation with
other display(s) (master / slave configuration)
Optional:
Housing for this display (AB331)
Spare 50 red LEDs for this display (GC074)
PCB size: 80 x 473mm
With this kit it is made possible to mount any
capital letter of the alphabet or any digit from
0 to 9. The concrete description of each letter and of each digit has been enclosed. The
kit includes especially bright LED’s. The
printed wiring board could be equipped also
with LED’s of any other colour. With each kit
it is feasible to mount any digit and putting
several kits together, you are capable to
build luminous nameplates, signboards,
house numbers etc.
Current consumption: 100 to 300 mA,
depending on the digit
Dimensions: 90x65 mm
Features:
This kit is a miniature message board making use of a 16 character 1 line LCD display
a message scrolls across from right to left
with adjustable speed
applications: at exhibitions, for advertising, to
greet visitors at the front door, as name tag,
...
46 character message memory
it enables you to add pauses during scrolling
Specifications:
Power Supply: 2 x AAA 1.5V cells,
LCD MINI MESSAGE BOARD WITH
BACKLIGHT AND ENCLOSURE
ADVERTISEMENT LED DISPLAY
WITH GREEN LEDS
Features:
This kit is a miniature message board making use of a 16 character 1 line LCD display.
This is an advertisement LED display kit with The LCD has a backlight. The enclosure is
12 self definable characters. This kit has the supplied. A message scrolls across with
same specifications as (EB849) except that
adjustable speed. It has a built-in message
its LEDs have a green colour instead of red. editor. You can add scrolling pauses into the
Optional:
message. Applications: use at exhibitions, for
Housing for this display (AB331)
advertising, to greet visitors at the front door,
Spare 50 green LEDs for display (GC073)
as name tag, ...
Specifications:
Power Supply: 9Vdc
HOUSING FOR ADVERTISEMENT
Message Memory: 124 character EEPROM
LED DISPLAY EB849 AND GC072
RS232-programming Mode: connect 2 wires
between a computer and the kit’s built-in
RS232 interface. You can use this mode to
type in your message via a Visual Basic
LUMINOUS LETTER CONTROL
program that can be downloaded:
This enclosure is specially made for the
Advertisement LED Display kits (EB849) and http://www.velleman.be
(GC072). The picture is meant to show what Velleman Product Code: MK158
the assembled kit, (EB849) or (GC072),
mounted inside this enclosure will look like.
Please note that this is only the empty encloMANUFACTURED BY: VELLEMAN
sure and there are no LEDs or electronics
PROGRAMMABLE
sold with it.
MESSAGE BOARD
Dimensions:
Length: 482mm
Width: 85mm
The device switches luminous letters or lamp Height: 25mm
groups slowly one after another on, keeps all
letters switched on for a while and switches
off all letters at the same moment. Then, the
process starts again. There are 4 connecting
outputs at which in each case either 1 letter
or one letter group could be connected (with
a lot of letters or with a whole text). The connecting velocity is ajustable. The control is
This is a programmable message board kit.
especially suitable to be used with our LED-
02.41
It makes use of a 16 character, 1 line, backlit
LCD. Messages can be transferred from a
computer via its RS232 port. Message transfer software can be downloaded from:
http://www.velleman.be
Velleman Order Code: K8045
You can replace up to 9 indicators or lamps
with this kit. Up to 9 sixteen-character messages are stored in non-volatile memory
(EEPROM). Messages can be recalled by
pressing a push-button switch. It also has 8
inputs. It has 4 operating modes:
1) Simultaneously display status of all inputs
2) Display all active inputs
3) Display the active input that has the highest priority
4) Display text messages in a ‘tickertape’fashion
A default message can be displayed to show
that no inputs are active.
Specifications:
Supply Voltage: 9-0-9Vac (AA749) (not incl.)
or 9 - 12Vdc
Inputs: 8 inputs accept logic levels, and can
be connected to open-collector outputs
Input Voltage Range: 24V max.
Display: supertwist 16 char., 1 line, backlit
Communication: RS232 serial, 2400/N/8/1,
no handshaking
For a RF wireless link you require:
1 Transmitter Module (AB341) together with
1 Receiver Module (AB342)
JUMBO 1-DIGIT CLOCK
This is a very unique 1-digit time display kit.
It displays the following digits successively:
first the ‘10-hour’ unit followed by
the hour unit,
the ‘10-minute’ unit and
last the minute unit
for example: time 12:57 ‘1’, ‘2’, ‘h’, ‘5’, ‘7’
Features:
Gadget Clock
Time is displayed as a sequence of digits
Bright, red, 57mm height 7-segment display
Enclosure is also supplied with the kit
Single button operation
Display-blank function to save power
Specifications:
Display: 12 hour system
1 digit displays time digits sequentially
Accuracy: 30ppm
Outer Dimensions: 74 x 59 x 32mm
with the kit. The time base is selected:
internal or mains-frequency (50/60Hz) controlled. The internal time base can be finetuned with the adjustable capacitor. The time
will be displayed for a couple of seconds
after the button was briefly pushed during a
power failure.
This digital clock kit makes use of a
PIC16F84 microcontroller. Large 41 x 57mm, Specifications:
Power Supply: 9Vac or 9Vdc recommended
hi-efficiency, red 7-segment digits are used
adaptor: (GB836) (not included)
to display hours and minutes, while smaller
10 x 14mm digits display the seconds. It can Backup Batteries: 3 x AA 1.5V cells:
be set for either 12 or 24 hour display forTime Display Selection: 12h- or 24h-mode
mat. The circuit has a dimming feature that
decreases the display brightness in the dark. Dimensions: 92mm width, 45mm depth,
101mm height
The clock may be adjusted for long-term
accuracy. Commented source code is availMANUFACTURED BY: VELLEMAN
able on the Internet.
Specifications:
ROLLING CLOCK
Dimensions: 2 x PCBs of 235 x77mm
assembled total height: 33mm
Note that the following is not included:
Space is provided for backup batteries:
4 x AA NiCd cells: 4 x (JB039) and
4 x single AA battery holders: 4 x (EB893)
THE BIG PIC CLOCK
MULTIFUNCTIONAL CLOCK /
DISPLAY WITH RF
This kit makes a nicely animated rolling time
and date display. Graphic display with 35
LEDs. Select hours, minutes, month or day
with SELECT and enter the values with SET.
Time display in 12h-mode (24h-mode when
setting clock). Fine-tune the clock by turning
6 x 36mm high digits. Time, Date & tempera- CV1.
ture indication, selectable with toggle option. Specifications:
1 sec. resolution chronometer with lap func- Power Supply: 9 - 12Vdc
tion. Count down function to a specific date, Supply Current: 20mA max
the last day H:M:S are displayed.
Backup Battery: 9V block type 6LR61 / 6F22
Scoreboard function (two players or teams,
Dimensions: 46/89 x 67mm
count up to 199). Random generator from 00
to 99. 2 digit dice. Count function. Chime
beep option. Relay output for temperature
control or time alarm. US or Europe display
ROLLING MESSAGE
option for time, date, degrees Celsius or
Fahrenheit format. All functions and settings
are wireless remote controlled.
Specifications:
Power supply : 12VDC/300mA
Fixed 433.92MHz transmitter frequency, as
required by law
Keychain remote control included
Temperature indication : from -20 to +70°C
(resolution 1°)
Temperature indication : from 0 to +150°C
(resolution 2°)
Memory backup option : 9V battery
Create your own moving message. This kit
Relay output : 1A / 24V max.
uses a 35-LED graphic display. The mesPCB dimensions : 255x80mm
sage can be up to 16 characters long.
Adjustable scrolling speed. Press “SET” to
change a particular character. Press the up
DIGITAL LED CLOCK
or down-key to select a character and end
with the “<”-sign. Display standby function:
press “Stby” (press RUN to restart).
Specifications:
Supply Current: 20mA max. / 4mA standby
Backup Battery: 9V block type (6LR61/
6F22)
Dimensions: 46/89 x 67mm
This is a digital, 7-segment, red LED display
Clock kit. An attractive enclosure is supplied
02.42
MAGIC MESSAGE
DIGITAL 7-SEGMENT
PANEL METERS
DIGITAL PANEL METER
LED DIGITAL VOLTMETER
Features:
Amaze your friends: wave the wand to make
the message appear
the message seems to be floating in the air...
lots of built-in messages and also gives you
the ability to enter your own 7-character
message
applications: novelty gadget, in emergencies,
at concerts or TV-shows, to welcome people,
etc...
it has excellent visibility due to the use of
high intensity red LEDs
auto power-off
Specifications:
Power Supply: 2 x AAA batteries (not included)
5 IN 1 EMERGENCY TOOL
This panel voltage meter kit is a good
replacement for the traditional, moving-coil
type, analogue instrument. It has good accuracy and stability. As it is very compact, this
unit can be built into all kinds of housings or
This is an electronic, DC (direct current), dig- even into existing equipment.
ital voltmeter kit. It has a 3-digit, 7-segment, Specifications:
green LED, digital display. The measuring
range may be extended up to max. 750V by Supply Current: 250mA
Minimum Voltage Displayed: -99mVdc
means of a prevoltage divider that is not
Maximum Voltage Displayed: +999mVdc
supplied. It is possible to mount the LED
Out-of-range Indication: positive / negative
indication unit separately from the display’s
driving electronics. The measuring input and Voltage Resolution: 1mV
Input Impedance: 100M Ohm
power supply have a common, “-”, ground
connection.
Hints: Use a 100 Ohm resistor for Rx.
Specifications:
Supply Voltage: 4.5 to 5.5Vdc
Voltage Measuring Range: 0 to +999mVdc
GENERAL 3 1/2 DIGIT PANEL
Precision: max. 0.1%
METER (7106)
LED Character Height: 13 mm
LED 3 1/2 DIGIT PANEL METER
5VDC
Features:
This kit makes use of microprocessor technology
functions include: flashlight, emergency
flasher, SOS Morse code flasher, SOS message wand and lighting distance meter
applications: camping, biking, hiking, boating, in the car, etc...
attractive enclosure with belt clip
Specifications:
Power Supply: 2 x 1.5V AAA batteries (not
included)
Make this general purpose 3 1/2 digit LCD
panel meter into your own voltage or current
meter or custom-make it to measure voltage
input from a transducer. Full details are
Make this general design 3 1/2 digit LED
given in the documentation. Uses the very
panel meter into your own voltage or current popular 7106 IC. The LCD section of the
meter. Or customize it to measure input from PCB may be cut off and mounted separately.
a transducer. Two PCBs allow low-profile
end-on viewing. All instructions to assemble
and operate meter are included. Meter can
3 1/2 DIGIT LCD PANEL METER
directly input an offset voltage, for example
from a weighbridge, use non-standard voltage inputs, measure current or high voltages.
Power supply: 5VDC
The 7106 contains in it all the active circuitry
for a 3 1/2 digit panel meter (DPM) in a single chip. It was designed to interface directly
to a liquid crystal display (LCD). Voltage is
02.43
the most frequently measured electrical
quantity. In temperature meters, current
meters, wind speed meters and resistance
meters what is actually being measured is
voltage, or more correctly, the potential difference between two points. With a few additional external passive components the 7106
chip may be made into an easy to use meter
for any of these purposes especially multiple
range digital volt meters.
4 DIGIT UP/DOWN COUNTER
4 DIGIT PRESETTABLE
DOWN COUNTER WITH OUTPUT
LCD PANEL METER
This is a 3 ½ digit, LCD, (liquid crystal display), panel voltage meter kit. It is a lot easier to read and much more precise than its
analogue equivalent. It is compact and and
easy to use. It can easily be used with a
sensor or adapter circuit that gives a voltage
output.
Specifications:
Supply Voltage: 8 - 15Vdc or a 9V battery
Display: 3 ½ digit LCD
Selectable Voltage Measuring Ranges:
-200mVdc to +200mVdc or
-2Vdc to +2Vdc
3-DIGIT LED COUNTER
PB300
This kit is an up counter with a 3 digit LEDdisplay. It has two push-button switches:
COUNT and RESET. Both buttons are
debounced to enable accurate counting and
reliable reset. There is an input for latching
the currently displayed count value. There is
a carry output that enables one to connect
together two or more counters to make a six
or nine digit display counter.
Specifications:
Display: 3 digit, 7-segment, red LED display
Counting Sequence:
Count from 0 to 999 then back to 0 again,
increment of +1 with every press of the
COUNT push-button.
Dimensions:
Display Unit: 50 x 80mm, 13mm height
Debounced Push-buttons Unit: 34 x 36mm
Push-buttons: 9mm diameter, 18mm height
Enclosure: 54 x 83mm, 29mm height
This is a low cost 4-digit Up/Down counter.
The count range is from 0000, 1, 2 … to
9999 (counting up) or 0000, 9999, 9998, ….
0001 (counting down). The Overflow output
pulses low (25ms) when the count wraps
This is a low cost 4 Digit Presettable Down
around to zero. This output allows two counCounter with output and reset. The count
ters to be connected together to make an 8
input can be used for both high and low
digit counter. There are 5 control pins:
speed counting applications. The counter
has four modes of operation that control how RESET, CLOCK, DOWN, DISABLE and
the output behaves when the count reaches OVERFLOW.
Power supply: 9 to 15VDC.
zero.
Maximum count rate: 30 counts per second.
Specifications:
4 Operating Modes:
MULTIFUNCTIONAL
count stops at zero and holds output low
UP/DOWN COUNTER
over-count past zero and holds output low
auto-reset at zero and pulse output low
over-count past zero and pulse output low
Count range: 0000 to 9999 (10,000 max).
Count speed: Low 30 cps / High 30,000 cps.
Inputs: Reset, Count, Rate.
Output Switch: 100mA 30V max.
(Open-Collector of NPN Transistor)
Display: red, 4-digit, 7-segment LED
Display Dimensions: 19 x 50mm
Dimensions: 51mm x 64mm, 15mm height
Features:
This kit comes in handy for people counting,
GENERAL 4 1/2 DIGIT
part counting, score keeping, ...
COUNTER (7224)
counts up or down
the count input may be obtained through onboard pushbuttons or by external pulses
display modes: normal or time (hh:mm and
mm:ss)
an internal oscillator allows time measurements
programmable pre-set value with equal output
self diagnostic mode at power up
easy board-to-wire connector included
(20cm wire)
Specifications:
Counter Input Voltage Range: 3 - 12Vdc
(dry contact switching also possible)
This general purpose 4 1/2 digit LCD counter EQUAL Output: 5Vdc / max. 50mA
is built around the 7224 IC. All the 7224 pins max. Counting Speed: 200 counts / sec.
are brought out. You can custom design it for
(2 / sec. with long debounce delay)
your own counter application.
max. Count: 4 digits (9999 / 23h59m /
59m59s)
Power Supply: 9 - 12Vdc or transformer 2 x
9Vac / 300mA
02.44
MULTIFUNCTIONAL
COUNTER MODULE
Display: LED, digital, 5 digits, 7-segment
PCB Dimensions (2 PCBs):
70 x 121mm and 33 x 77mm
50MHZ, 8-DIGIT
FREQUENCY METER
This multifunctional counter is Ideal for:
counting people or parts, for keeping scores,
etc... The HOURS:MIN and the MIN:SEC
functions are also very practical (displays
23:59 & 59:59). A built-in oscillator makes it
possible to measure time intervals without
making use of an external oscillator (clock
function). Counting impulses (addition & subtraction) can be received from the front panel
push-buttons and the counting inputs. A
memory function constantly compares the
current value with a pre-set value and activates an output for as long as both counts
are equal.
Features:
Display Modes: normal time or time interval
(hh:mm and mm:ss)
The Internal Oscillator enables one to do
time measurements
Count input through panel push-buttons or
by external pulses
Selectable input debounce delay
Programmable pre-set value and an output
for when the count is equal to pre-set value
Specifications:
Supply Voltage: 9-0-9Vac (AA749) or
9 - 12Vdc (AA729)
Maximum Value Display:
23h59m: 23 hours, 59 minutes or
59m59s: 59 minutes, 59 seconds or
Count 4 digits: 0000 up to 9999
Maximum Counting Speed:
200 counts per sec. or
2 counts per sec. (long debounce delay)
Counter Input Voltage Range: 3 - 12Vdc
can also use push-button like (GB723) or
reed switch and magnet (MB049) or
IR single beam crossing detector (AA703)
EQUAL Output: 5VDC / max. 50mA
Dimensions (frame included):
Height: 90mm, Width: 165mm, Depth: 35mm
FREQUENCY METER 10HZ - 1MHZ
Introduces 3 1/2 digit LCD and the very popular 7106 IC. This IC has been used in lowcost multimeters for over 13 years. We use it
to measure temperature using a ordinary
signal transistor as the sensor. Data sheets
are provided as is a breadboard area so you
can extend the circuit to build your own voltmeter, ammeter, resistance meter or extended-range temperature meter. Takes away the
mystery of how multimeters work. Box provided.
Supply voltage: 9VDC.
PCB Size: 94x55mm
Display Size: 50x20mm
DIGITAL TEMPERATURE SENSOR
WITH LED DISPLAY -40 TO 85ºC
This kit is a stand-alone frequency meter
capable of measuring the frequency of periodic signals up to 50MHz. It has two frequency ranges and two sampling rates. The
frequency is displayed on an 8-digit, LCD
display. A plastic enclosure and screen-printed front panel is supplied.
Specifications:
Frequency Ranges:
1Hz to 15MHz and
10Hz to 50MHz
Input Impedance: 1MOhm in parallel 10pF
Input Socket: BNC panel type
This kit makes use of the DS18B20 temperaKIT ORDER CODE: AB112
ture sensor from Dallas Semiconductor. A
preprogrammed PIC16F630 microcontroller
HUMIDITY METER WITH LCD
reads the temperature from this sensor and
displays it with a 2 digit, 7-segment, red,
LED display. Source code is also supplied.
This kit introduces one to SMD (Surface
Mount Devices) resistors that has to be soldered to the PCB.
3 x 1.5V AA cells, (AB748) (not incl.)
Supply Current: 30mA at 4.5Vdc
Temperature Range: -40 to 85ºC
Batter Holder: 48x63x17mm
A digital humidity meter with LCD (Liquid
Crystal Display) suitable for measuring the
relative humidity from 10 - 90 %. The circuit
is built around a special humidity sensor,
GAMES AND FUN STUFF
made by Philips Semiconductor, and nine
other integrated circuits.
Specifications:
ELECTROSTSTAT APPARATUS
TEMPERATURE / LCD
PANEL METER 9VDC
The device produces from a 3 to 4.5V battery voltage pulsating high-voltage pulses of
approximately 80 to 500V.
Usage: As joke, for use in physical tests or in
order to catch earthworms required for fishing.
A reliable frequency meter for the laboratory.
It counts with great accuracy from 1Hz to
1MHz covering the frequency areas of all the
trade generators .The meter will not load the
signal source that is connected to its input,
nor will it cause its frequency to change.
Specifications:
02.45
DEFTNESS GAME
BRAIN GAME
flashing LEDs indicate that you’re a red-hot
lover
it has a wide sensitivity range that covers the
entire spectrum, from the cool to a steaming
Latin lover!
power switch included
Specifications:
ELECTRONIC DECISION MAKER
The object of the game is to pass a small
wire loop through a thread wire with a lot of
bends and obstacles. The person who touches the thread wire with the wire loop, will
release an acoustic and optic signal. An
interesting game for parties and for neverending evenings.
STAIRWAY TO HEAVEN
A game of skill to turn on the Stairway of 6
LEDs as the bi- colour LED flashes.
Introduces you to several electronics basic
circuits with a surprisingly difficult game to
play. Box included. Good introduction to
electronics. 9V battery.
This kit using 4 LEDs and 4 push buttons
can provide hours of fun. The aim-of-thegame is to repeat a pattern that is generated
at random. The game can be played both
visually and audible or visually only (selectable). It features 4 difficulty levels that can
be selected at start-up. The replay speed
gradually increases during the game, to
make it even more challenging. Low power
consumption. Microprocessor controlled.
Auto power off.
Specifications:
Power Supply: 3 x 1.5V AA cells: (AB748)
(not included)
This kit helps making difficult YES or NO
decisions. Ideal for the indecisive. Simply
push the button to start the flashing of
YES/NO LEDs. The flashing speed gradually
BRAIN GAME WITH COVER
decreases and finally one LED remains lit.
Specifications:
Supply Current: 1µA idle / 8mA in use (this is
very low)
auto power-off
ELECTRONIC DICE
QUIZ TABLE
This is the brain game kit that is supplied
with a stylish cover and knobs. This kit has
the same specifications as (EB523) except
for the additional cover and knobs.
Specifications:
Power Supply: 3x1.5V AAA cells
(not included)
Up to four players can compete. LED indicates first button pushed. Quizmaster
‘RESET’ -button with ‘button pushed’-indication. Two units can be daisy-chained for
eight-player-fun!
Specifications:
on/off switch
LOVE TESTER
This kit is an electronic die with LED indication. It rolls out slowly when the push button
is released.
Specifications:
Hint: If the normally dimmed LEDs are still
Features:
lighting up, you can replace the 2V7 ZD1
Check your love life!
each partner holds one end of the PCB, then with a 3V6 zener diode (500mW).
they join hands, watch the meter go...
great fun at parties, among friends, etc...
it has a 10 LED readout and an audible
‘love-level’-indication
02.46
DICE WITH LED DISPLAY
USING PIC16C54
DAUL ELECTRONIC DICE
Power supply: 9VDC
ELECTRONIC WHEEL
OF FORTUNE
One of the most popular electronic kits ever
is the LED dice. Now we have used the popular small micro-controller, the PIC16C54 to
’roll the dice’. All software code is available
on the Internet: http://kitsrus.com/soft.html in
the file k69.zip. The documentation is commented so that you can learn how to program these devices yourself.
Power supply: 9V battery (EB160)
SHAKING DICE
Board games provide an excellent source of
pleasant and healthy entertainment.
However, the dice can be a constant source
of distraction : they fall off the table, allow
cheating, one or more players don’t see the
results properly and so on. There can be no
doubt at all about the result displayed on this
electronic dice module, and cheating is out
of the question. Two fully independent dice.
At your choice you can play with one or two
dice. Displays are switched off automatically
after 30 seconds to save battery power.
Specifications:
power supply : 8 to 12VDC or 6VAC / 60mA
After releasing the push-button, the light signal rotates quickly at the 10 LED’s, slows
down and then stops at random at one of the
LED’s. During operation all LED’s shine
except that LED that just receives the signal.
That’s why the luminous board looks very
decorative.
ROULETTE
WHEEL OF FORTUNE
Features:
This kit requires no push buttons, just give it
a shake
it rolls out slowly and flashes the last combination
microprocessor-controlled
auto power-off
Specifications:
Power Supply: 3Vdc battery (CR2025 or
CR2032) (not included)
Supply Current: 9mA
LED DICE WITH SLOWDOWN 9 VDC
Features:
This kit is a 10-LED wheel of fortune
push the button to start the spinning action
the spinning speed gradually decreases
finally it stops and one LED remains lit
auto power-off
Specifications:
MANUFACTURED BY VELLEMAN
This kit uses 37 LEDs. It generates a spinning sound when active. There is a ‘Winner’tune for each colour. It spins LEDs between
games. Pushbutton operation. It makes use
of microprocessor technology.
Specifications:
Power Supply: 3 x AA batteries (not included)
auto power-off
CLASSIC TV GAME - PAL VERSION
ROTATING ROULETTE 10 LEDS
9 VDC
The kit uses 7 LEDs to simulate the rolling of
a dice after the Roll button is pushed. It has
a slowdown feature so you can see the
’rolling’ of the dice slowing down and then
stop. The box is included with the kit.
Ten LEDs are arranged in a circle. Pressing
Power supply: 9VDC
the switch turns one LED on in turn to simuKIT ORDER CODE: PB222
late a roulette ball spinning in the wheel. A
slowdown circuit gradually brings the ball to
a stop. The circuit uses the versatile 4017 IC
and a voltage controlled oscillator circuit.
02.47
This kit is used to play a Tennis type Ball
Game on TV (complying with the PAL standard). One player mode: four difficulty levels,
to select a level hold one of the move buttons then press RESTART. Two player
mode: press RESTART. Press both move
buttons to “smash” or to start serve. Only the
server can score points.
Features:
It has Video and Audio Output
Adjustable Brightness
auto power off
Specifications:
Power Supply: 3 x 1.5V AA batteries
Detection range: 1 - 1000 MHz
DTMF TONE GRABBER /
DECODER 12VDC
HF-DETECTOR MODULE
SPY STUFF
LISTENING STETHOSCOPE
This DTMF grabber kit can detect and
decode the dial tones generated by a telephone (does not detect pulse dialling). It can
be connected to the telephone line or
With this high frequency (HF) detector it is
receive audio DTMF from a loudspeaker via
possible to locate small bugging devices that the built-in microphone. It makes use of the
are active in a room, computer or telephone. DTMF receiver CM8870 from California
The sensitivity of this detector is set so that
Micro Devices and a preprogrammed microonly the powerful, > 50mW, bugging devices, controller. The digits represented by the
with a transmitting radius larger than 150m, DTMF dial tones are displayed on a 16 charare detected. This instrument is used to
acter, single line LCD display. Although only
You are able to listen through thin walls,
doors, windows, etc. Highly sensitive pream- detect bugging device signals in the frequen- 16 digits are displayed, up to 32 digits can
cy range 1 to 200 MHz. Requires a 9V batbe saved in memory. All 32 digits can be
plifier with microphone capsule and headtery.
read by scrolling the display left and right.
phone. To be used for observing animals
There is also a serial output for sending the
(e.g. mice), as baby-alarm etc.
detected tones to a PC using ASCII characMANUFACTURED BY: KEMO
ters.
Specifications:
TELEPHONE
TAPE RECORDER SWITCH
ACCESSORIES
Display: 16 digit, single line LCD
Buffer: max. 32 digits
FOR TELEPHONE
Inputs: connect directly to telephone line or
via audio from speaker to microphone
REMOTE CONTROL VIA GSM
MOBILE PHONE (PHONE NOT INC.) Outputs: LCD display and serial RS232 in
ASCII character format
REMOTE CONTROL BY TELEPHONE
This kit uses a FET to switch on a tape
recorder when the phone is picked up. It will
work with low voltage tape recorders as low
as 1.5V. It requires the REMOTE & MIC
jacks of the tape recorder to be available.
Plugs are provided.
AM / FM TRANSMITTER ‘BUGS’
DETECTOR 9VDC
Features:
Turn equipment ON and OFF from a random
place via a cellular phone, that you specially
reserved to use with this kit.
Applications: Single relay output turns on the
lights or the heating, opens your gate, controls animal feeders, make believe you are at
home, activate a car alarm, etc.
It requires a cellular phone to receive all its
activating incoming calls. It can not receive
The placement of electronic eavesdropping
phone calls directly. Ring detection is used in
devices (bugs) is becoming a usual phenomthe circuit to avoid phone charges.
enon. The detection of electronic eavesdropNo need to open or modify your cellular or
ping devices is not very easy. Using this
connect it with other devices
detector you can ensure the privacy of your
Compatible with most cellular phones
personal life, because it allows you to sweep
Specifications:
for electronic eavesdropping devices.
Dual operation mode: toggle ON/OFF or ON
Sensitivity is adjustable using a potentiomewith auto turn-off timer
ter. Audible indication using a loudspeaker.
Timer settings: 0.5s, 2s, 30s, 1 min, 5 min,
Loudspeaker and telescopic antenna are
15 min, 30 min and 1 hour
included.
Single relay output: COM, NO/NC 3A
02.48
This kit makes it possible to remotely turn up
to three devices on or off over the telephone
line. There is place for 3 output relays, but
only 1 is supplied. It can only be controlled
by a tone dialing (DTMF) telephone. It is
also possible to check the condition of one
switch (open or closed). Example: when you
are away on holiday, you may switch the
lights on and off from time to time, turn on
the heating before returning home or check
the alarm. A major advantage of this circuit
lies in the fact that audio signals are used to
tell whether a specific output has been
turned on or off. Operation is protected by a
user defined security code, which is simply
keyed in from the telephone keypad.
Specifications:
Supply Voltage: 12Vac / 300mA
Output Relay Switch: (only 1 supplied)
12V SPDT 10A / 250Vac relay is used,
only the common and normally open
connections are used
Automatic pick-up can be selected for
± 3 or ± 8 rings
Automatic hang-up if no code is entered
within 20 seconds
Optional (not included):
Two Output Relays: 12V SPDT 10A / 250Vac
2 x (AC897)
TELEPHONE AMPLIFIER
FIBRE OPTICS VOICE
TRANSMISSION 9VDC
TELEPHONE LINE SWITCHER II
12VDC
This telephone amplifier may be used as a
freestanding amplifier with speaker, e.g. to
listen to a telephone conversation, or the
output may be connected to an amplifier or
mixing panel (e.g. radio stations).
Specifications:
Input: isolation transformer interface
Speaker Output: 0.5W / 8Ohm
Line Output: 0dB (0.775Vrms)
Power Supply: 7 - 9Vac or 9 - 12Vdc /
This device connects to the telephone line
150mA
and can be used to remotely control up to 4
relay outputs using a DTMF (tone dialing)
telephone. A number of user settings are
MANUFACTURED
BY: VELLEMAN
available to improve the useability and security of the device. The kit comes complete
SUCTION CUP PHONE PICKUP
with a small plastic case with silk-screened
WITH SPEAKER
front and rear panels.
The unit is controlled by an Atmel 89C2051
microcontroller. Source code is not available.
TELEPHONE CALL LOGGER 12VDC
The kit allows you to send sound through
1mm plastic fibre optic cable (4m cable
included). On the transmitter circuit board
there is a microphone and a circuit to modulate the light emitted from a LED. The LED is
contained in a plastic case which allows
easy connection of the fibre optic cable. On
the receiver board there is a photo-darlington receiver unit, a speaker and a circuit to
convert and amplify the detected signal back
into a sound wave. Because the signal travels in the fibre optic cable as a light wave it
is unaffected by any electric or magnetic
fields that it travels through.
Supply Voltage: 9VDC for each PCB
PCB size Tx: 25x45mm
PCB size Rx: 43x43mm
RECORDING DEVICES
This is a telephone call logger kit. It records
all outgoing telephone call numbers, their
“real time” start and stop times. It accepts
only DTMF tone keypresses. Data is stored
in 16K (is supplied) of non-volatile
EEPROM memory that is expandable up to
64K for storing 2848 10-digit phone numbers. This memory remembers data even
after power was removed. Although it operates stand alone, it does not have to be connected to a PC while logging, a PC is
required to receive call data via serial port.
This call data is in a format that can be easily imported into Microsoft Excel. An enclosure with screen-printed front and rear pannels is supplied.
It is often convenient for people in a room to
listern to both sides of a telephone conversation. The amplifier in this kit has been
designed for this purpose. A magnetic pick
up with suction cup attaches onto the earpiece of your phone at one end and into the
amplifier at the other end. Feeds into an 8
ohm speaker (included) after amplification.
Volume control trimpot built in. There is no
direct electrical connection to the telephone
system.
4 OR 20 SECOND MESSAGE
RECORDER / PLAYBACK MODULE
This is kit makes a high-quality voice (sound)
recorder with playback capability. It can be
INTERCOMS
used to greet visitors, play pranks, warn burglars,…
It can record 1 message of up to 20 seconds
TWO STATION INTERCOM 6-12 VDC or 5 different messages of up to 4 seconds
each.
Two Playback modes:
Push once to play message or
Play message until button is released
It makes use of EEPROM technology with
100-year message retention. No memory
loss in case of power failure. A line-output
and loudspeaker output is available. A loudspeaker and built-in microphone is supplied.
Optional: a rotary switch is required to select
one of five messages.
A very useful kit which can be used wherev- Specifications:
er a light, economical and portable intercom Power Supply: 8 - 18Vdc at power socket or
6V battery (4 x AA or AAA) (not included)
is required. Each unit contains its own microSupply Current:
phone, speaker and audio power amplifier
DC at power socket: 4mA to 100mA max.
circuit using the LM386. The circuit may be
Battery: 20µA standby / 100mA playback
modified to become a hard wired bug. The
kit includes 10m of cable and two speakers. Speaker Output: 120mW into 8 to 16 Ohm
Sampling Frequency: 6.4kHz
PCB Size: 55x30mm
02.49
Not Included:
Rotary Switch: (HB313)
MOSQUITO, FLEA AND TICK
REPELLER 9VDC
40 SECOND MESSAGE
RECORDER ISD2540
Loudspeaker Output: max. 4 additional
piezo loudspeakers!
Audio Frequency Range: (adjustable)
12kHz - 38kHz
POWERFUL ULTRASONICS
GENERATOR
The kit emits an adjustable, especially high
pitched whistling sound. This sound is avoided by mosquitoes. The frequency is
adjustable through a trimmer pot. The sound
Record as many messages as you can in
is adjustable from an especially high sound
this modern, non-volatile, combined audio
processing & memory chip from Information (audiable by humans) to the deep ultrasonic
range (not audiable by humans). These
Storage Devices (ISD2540). One button to
ultrasonic sounds also repell vermins such
START/PAUSE & a second button to
RESET. There is also the option to endlessly as ticks and fleas.
Power supply: 9VDC
loop the first recorded message.
Input current: <7mA
Power Supply: 6Vdc
Frequency: adjustable
PCB size: 27x55mm
120 SECOND MESSAGE RECORDER
ISD25120
Record as many messages as you can in
this modern, non-volatile, combined audio
processing & memory chip from Information
Storage Devices (ISD25120). One button to
START/PAUSE & a second button to
RESET.
Power Supply: 6V DC.
ULTRASONIC DOG WHISTLE
This electronic ultrasonic whistle emits highpowered ultrasonic sounds which are widely
audible for dogs. These high frequencies are
mostly not to be heard for the human being,
dogs can be drilled with it. The frequency is
adjustable between approximately 8000 to
25000 Hz. A special piezo loudspeaker is
included. Indispensable for all dog-owners!
This module can generate ultrasonic sounds
that scare away animals like rodents. It generates pulsating, powerful, ultrasonic soundwaves (high pitched audio signals) with
adjustable frequency. There are 4 piezoloudspeakers included with this module.
Specifications:
Supply Current: 50mA at 12Vdc and
100mA at 24Vdc
Loudspeaker Output: only for piezo loudspeakers!
10kHz - 40kHz
Dimensions of the piezo-loudspeakers:
(round part) 14mm x 30mm diameter
ULTRASONIC SOUND
GENERATOR MODULE
ULTRASONIC SOUND GENERATOR
HEALTH, SAFETY AND
ENVIRONMENT
This module can generate ultrasonic sounds
that scare away animals and insects: e.g.
rats, mice, wild rabbits, mosquitoes. It can
also be used as a dog whistle. It generates
ANTI-FLEA-GENERATOR
pulsating high pitched audio signals with
FOR THE CAT BASKET
adjustable frequency.
Specifications:
Supply Current: 50mA at 12Vdc and
100mA at 15Vdc
Loudspeaker Output: only for up to 5 piezo
loudspeakers!
10kHz - 40kHz
This ultrasonic generator module can gener- Dimensions: 75 x 45 x 28mm
This generator produces ultrasonic sounds,
It requires a piezo-speaker, like (GB784) or
ate ultrasonic sounds that scare away aniwhich are adjustable within the range of
(GB773) (not included)
mals and insects: e.g. rats, mice, wild rabapproximately 8 to 35kHz. It is said, that
bits, mosquitoes. It can also be used as a
crawling and jumping parasites are banished
dog whistle. It generates powerful, pulsating,
through the ultrasonic sound. Frequency can
high pitched sound-waves with adjustable
be adjusted so that the domestic animal will
frequency. The module contains a built-in,
not be disturbed.
special piezo loudspeaker. In case more outSpecifications:
put is required one can connect an additional
“piezo-tweeter with flare” (GB784) or “ultraNot Included:
sonic wall loudspeaker module” (GB773).
Loudspeaker 8 Ohm (not piezo) or
Specifications:
a dynamic 8 Ohm earphone
02.50
SMOKE ALARM 12V
This visual smoke alarm switches a relay if
thick smoke gets between the installed
infrared light barrier. Sirens, alarm lamps etc.
may then be switched by means of the relay.
This Smoke Alarm is a circuit for instruction
and amateur purposes. It is not suitable for
use as smoke alarm for the protection of
property and life! The circuit does not react
or hardly reacts to ”thin” smoke like e.g. cigarette smoke. So to try out you should use
heavy and thick smoke.
Operating voltage: 12VDC 150mA
GAS SENSOR - SPIRITS TESTER
GEIGER-MULLER COUNTER KIT
Radiation and radio active waste is bad for
the living and environment. This kit is used
to measure radiation and give an acoustic
indication of its intensity. The sensitivity is at
its highest for gamma rays and high energy
beta rays. The assembly is compact and
may be mounted into a plastic enclosure,
together with a 9V battery.
Specifications:
Power Supply: 9V battery (EB160) (not incl.)
battery life is approximately 2 months for
continuous use and normal radiation levels
Assembled Height: 25mm
Enclosure: (EB548) or (AA042)
A mains powered ion generator which may
be made into a negative or positive ion generator depending on the orientation of the 30
diodes. The use of this circuit will greatly
benefit your health by cleaning the air from
dust, pollen, smoke and pollution and effectively reduces the severity of symptoms in
some respiratory troubles. An increased concentration of negative ions in the air makes it
feel fresher, brings a feeling of well being,
helps in reducing stress.
This kit makes use of the Crockroft-Walton
voltage multiplier that consists of a string of
diodes and capacitors connected in succession. Although the output voltage is high, the
current is very low. A neon light indicates
whether the kit is on or off. The kit must be
built into a ventilated enclosure for routine
operation.
Specifications:
Fuse Protection: 20 x 5mm, 100mA / 250V
Output Voltage: 5kV
ELECTRONIC ACUPUNCTURE
3 TO 6VDC
ION GENERATOR
This instrument indicates gases such as
alcohol, acetone, benzole, propane, carbon
monoxide (contained in the smoke of fire).
Perfect as alarm for gases and fire.
Operating voltage: 12V approx. 150mA
Indication: LED and relay ( 1 x ON 3 A)
This electronic acupuncturing machine can
be used to cure many disorders using the
electronic acupuncturing method.
An illustration describes effective acupuncCreate your own Indoors Health Resort
ture points on the body where this kit can be
Climate with this device. This kit charges air used.
CLEAN-AIR MEASURING DEVICE
molecules negatively to become negative
Dr. Kazumi Masaki of the University of
air-ions. This is done by generating a very
Osaka was the first to make use of this elechigh negative output voltage that is required tronic technique.
to transfer electrons to surrounding air mole- Not only did it prove great success but even
cules. Although the output voltage is high,
improved on the age-old acupuncturing techthe output current is very low.
niques.
This kit has an air-regenerating effect by
By placing 2 electrodes against the skin the
removing dust and bacteria from the air. A
acupuncturing machine stimulates the nerve
high share of negative air-ions is necessary points and relaxes muscles
for the general well being: it reduces troupainless unlike the old needle technique.
bled sleep, aggressiveness, headache, sen- This method could one day even replace
sitivity to changes in the weather, lack of
conventional medicines.
concentration, etc.
Operating voltage: 3-6VDC
Specifications:
DECALCIFIER AGAINST
Output Voltage: 3 - 7kV
Changes of the clean-air are indicated with a
Dimensions: 44.5 x 54.5mm, 25mm height
CALCIFICATION
measuring unit. Depending on the intensity,
air contaminations through cigarette smoke,
solvent vapours, exhaust gas, kitchen
vapours, factory exhaust gas etc. are indicatNEGATIVE OR POSITIVE ION
ed by means of a measuring device. The
GENERATOR 220 VAC
device only indicates that the air quality has
changed, it is not able to analyse the kind of
This device is not harmful to the environair contamination (no chemical classificament, i. e. without chemicals and operates
tion!).
on a physical-inductive base. Easy to mount,
Operating voltage: 12VDC 200mA
no intervention into conduits. This module
protects washing machines, dish washers,
heating boilers etc.
Operating Voltage: 9 to 12VDC
02.51
Current load: <50mA
ULTRASONIC DISTANCER
ALERTER / ALARM
ULTRASONIC WIND SPEED METER
Operating Voltage: 9 to 12Vdc
ULTRASONIC RADAR 12 VDC
A LED lights up if a body approaches the
ultrasonic sensors at a distance of 10 to 80
cm. Ideal to use as a parking-in assistance
for cars in garages, alarm signal for persons
or animals staying in a certain area, object
recognition at assembly lines, theft monitoring for larger objects etc. The device works
This kit is used to measure wind speed. It
according to the same principle as the ultrahas no moving parts and makes use of two
sonic echo ranging of bats!
ultrasonic transducers facing each other and Operating voltage: 9 to 12VDC
spaced 18cm apart. Wind speed is displayed
on a 2 line, 16 character LCD. The circuit is
controlled by a PIC16F628 microcontroller.
CRYSTAL-LOCKED ULTRASONIC
Speed is displayed in meters and feet per
second and also kilometer and mile per hour.
MOVEMENT DETECTOR
There is also a full averaging mode using
previous readings.
Specifications:
Power Supply: 9V battery
Wind Speed: up to 80 km/h (50 mile/hour)
CAR ACCESSORIES
A circuit that can be used as a movement
detector in any closed space. It can be used
as a sensor for any alarm system. The circuit
is ideal for use in the car. The useful range
of the radar is about 10 meters. The sensitivity of the detector can be adjusted to suit
your particular need.
Power supply: 12VDC
ANALOGUE R.P.M. INDICATOR
WITH LED’S 12 VDC
This kit is useful for detecting movement
within 4m range in a 40 degree cone in front
of the sensor. A matched pair of ceramic
transducers, operating at 40 kHz is used for
PARKING RADAR
sensing. No calibration is needed since a 40
kHz crystal oscillator drives the circuit at the
optimum frequency of the transducers.
Sensitivity is adjustable. A LED lights up and
a transistor output goes low when movement
is detected. Operating voltage: 9 to 12VDC
The electronic version of the most essential
measuring instrument within a car. It is reliMANUFACTURED BY: DIY
able and simple to construct. The small size
makes the installation possible almost anyMOVEMENT DETECTOR II
where within a car. It provides a reading
within the range of 0 to 7000 rpm. The display takes the form of a circular light bar
If you have problems parking then this kit is
made up by LEDs and provides a reading
for you. Using (ultrasonic) sound waves,
with a discrimination of 250 revolutions per
whose frequency is beyond our range of
LED.
hearing, we can "measure" a distance.
Consequently, a sensor mounted at the back
Input impedance: 100k Ohm
of the car can give an indication of the disKIT ORDER CODE: PB220
tance between your car and the car parked
behind you or other obstacles (only at the
DIGITAL TACHOMETER
same height as the sensor). When the preset minimum distance is crossed, an audible
signal is generated.
Specifications:
This kit is useful for detecting movement
detection range : 5cm - 1.5m (adjustable)
through a doorway. A matched pair of ceramdetection angle : 5°
ic transducers, operating at 40 kHz is used
supply voltage : 10 - 15VDC / 16mA
for sensing. The ultrasonic sensors are most
PCB dimensions :
sensitive within a 40 degree cone in front of
sensor : 28 x 95mm
the kit. No calibration is needed since a 40
base : 48 x 125mm
kHz crystal oscillator drives the circuit at the For cars or motorcycles with a petrol engine.
optimum frequency of the transducers.
May be used as a general purpose revoluMANUFACTURED BY: VELLEMAN
Sensitivity is adjustable. A LED lights up and tion counter.
a transistor output goes low when movement range : 100 - 9900 revolutions/minute
is detected. It is best not to power this kit
2 digit display
with batteries, that go flat, because the kit’s
easy calibration
sensitivity is dependent on the supply voltpower supply : 10 - 15VDC / 200mA
age. Use a plug-in DC-supply like (AA729).
PCB dimensions : 80 x 45mm + 80 x 60mm
02.52
front panel dimensions : 70 x 90mm
See special instructions in manual for use
with electronic ignition.
DIGITAL R.P.M. INDICATOR 12 VDC
Wiper Rate: 10 - 60 times per minute
or two functions. To indicate that the head
lights should be switched off after switching
off the ignition contact (battery protection), or
to indicate that the head lights should be on
WINDSHIELD WIPER ROBOT OR
once ignition contact is switched on (obligaINTERVAL TIMER 12 VDC
tory in some countries).
Supply voltage: 12V DC
PCB size: 48x57mm
COURTESY LIGHT DELAY 12 VDC
The most essential and most useful instrument needed for a car is offered in an electronic version. The circuit is reliable, highly
accurate and easy to assemble. The engine
revolutions are counted and the result is displayed on a four digit display. Engine revolutions in the range between 0 and 7000 rpm
are measured. The circuit can be installed in
almost any car due to its small size.
Maximum reading: 7300 r.p.m.
ELECTRONIC TRANSISTOR
IGNITION FOR CARS
This is an adjustable interval, periodic timer
kit with two identical relay output switches.
Both relays switch simultaneously. Up to 3
different time intervals can be selected with
the PCB mounted rotary switch. Ideal for the
A clever and useful circuit for the driver.
windshield wipers of a car. It can also be
When you enter the car and the doors are
used for an automatic slide projector.
closed it keeps the interior lights on for a few Specifications:
seconds to give you time to put the key in
the lock, fasten your safety belt and start the Supply Current:
car. Stop fumbling in the dark! The delay is
relays off: 25mA
adjustable. The circuit has been designed to
relays on: 100mA
work off a car battery.
Timing Periods: (selectable) 5, 10 or 20 sec.
Power supply: 12VDC
Output Relay Swithes: (Two SPDT relays)
2 x COM., 2 x NC and 2 x NO connections
are available at screw terminals
Relay Contact Rating: 7A / 220V each
CAR COURTESY LIGHT
CONTROL KIT 12 VDC
CAR INTERFERENCE SUPPRESSOR
12 VDC
This kit gives your car the feel of an expensive luxury car. Better starting and smoother
running, particularly at very high and very
low RPM. Lower fuel consumption, less pollution, lower servicing costs. Drive economically and drive electronically. It may only be
used with petrol or gasoline engines and
only for cars with negative ground.
Specifications:
Supply Voltage: 12Vdc (6V is also possible)
Hint: For use on a 6V system replace the following parts:
R1, R2 with 150 Ohm / 1W
R3 with 68 Ohm 1/4W
R5, R6 and R7 with 68 Ohm / 1W
connection speed: up to 500kHz
This kit is useful for finding the ignition
switch or seat belt in the dark. This kit can
be used to control the interior illumination of
a car. One push-button operation. Adjustable
switch off delay. A safety circuit automatically
switches off the interior light after 5 minutes.
A Push-button is supplied. Protected against
battery polarity reversal.
Specifications:
Supply Current: 13mA min.
Switch-off delay: (adjustable) 0 to 60 sec.
WINDSHIELD WIPER CONTROLLER
WITH RELAY 12 VDC
HEAD LIGHT WARNING ALARM
12VDC
The head light indicator may be set for one
A very useful circuit that will let you adjust
the pause-time-interval between wipes of
your car’s wipers. One can adjust the wiper
rate according to the heaviness of the rain. It
can be fitted easily in any car. The kit
includes an output relay switch.
Working voltage: 12 - 14VDC
Current: max. 200mA
02.53
This kit is an electric filter that was designed
to eliminate the interference signals generated by a car’s engine, wipers, flash indicators
and air conditioning. These radio frequency
interference signals are particularly annoying
when trying to listen to weak radio broadcasts. This kit has to be connected in series
with the power supply cables of your radio.
Specifications:
Supply Voltage: 18Vdc max.
Current Rating: 3A
ORDER CODE: PB190
UNVERSAL CAR NOISE FILTER
12-BIT DATA ACQUISITION UNIT
Optional (not included):
Three Additional Temperature Sensors:
DS1820 or DS18S20: 3 x (AC848)
4 CHANNEL USB
RECORDER / LOGGER
This is yet another high quality electric filter
module that is used to suppress interfering
signals generated by a car’s engine. These
signals can affect devices such as the car
radio and audio system. You simply connect
this filter in series with the power line of the
affected device.
Maximum Current: 20A
MODULE ORDER CODE: AC527
12-bit Data Acquisition System. It uses a
MAX186 ADC. It all fits inside an extended D
shell case which plugs onto the parallel
DB25 connector of your PC. It has 8 analog
inputs, 4 digital inputs & 4 digital outputs.
PARALLEL PORT POCKET
SAMPLER 0-2V OR 0-20V
COMPUTER
ACCESSORIES
SERIAL KEYPAD MODULE
This kit can be used to record DC signals or
slow-moving signals over very long periods.
This compact PC-driven sampler monitors
It is connected to the USB port. The measvoltage changes over periods ranging from
urements are automatically stored on your
milliseconds to months. It can also be used
hard disk for further processing. No power
as a simple low frequency digital scope to
supply is required as it is powered by the
examine audio and other signals up to about
USB connection. Installation is easy and
5kHz. No batteries are required as it is powstraightforward. Signals are displayed on the
ered from the computers parallel port. The
PC screen using a DVM or analogue display.
kit fits into an extended D shell case that is
The enclosure, USB cable and PC-LAB2000
included. Software is only on the Internet:
Software is supplied.
http://kitsrus.com/soft.html and use the file
System requirements:
This serial keypad module can be used to
k112_v4.zip.
IBM compatible PC, Windows 98SE, ME,
input numerical information into a PC. It
XP software can be down loaded from
makes use of a pre-programmed microconMANUFACTURED BY: DIY
the Internet: http://www.velleman.be
troller. Data communication is done via the
click on Support, Downloads select the file:
serial port of a PC. Data is sent in ASCII
TEMPERATURE DATA LOGGER
PC-Lab2000 v1_36.zip or later and also,
character format that can be accessed with
K8047_PCS10_DLL.zip
Hyper Terminal, a standard Windows comSVGA display card (min. 800x600),
munication program. This module is ideal for
mouse, CD-Rom player
programmers who want to quickly test their
free USB port
own serial interface programs or speed up
Specifications:
the design process of a product. Computer
Hardware:
software is not included.
USB connected and powered
Specifications:
four DC-coupled input channels
This module is powered by the serial port
input impedance: 1Mohm
and does not require an external power supmaximum sampling frequency: 100Hz
ply
four input ranges: 3V, 6V, 15V and 30V
Current Consumption: 3mA
input sensitivity: 10mV
Keypad: 12 push-button, 3x4 matrix keypad
accuracy: ± 3% of full scale
Data Format: ASCII characters
This is an 8-pin micro controller based circuit maximum input: 30Vdc max.
Baud-rate: 9600 bits per second
for temperature data logging via the serial
power and recording / diagnostic LED
Parity Bits: none
port of any computer.
Software:
Data Bits: 8
Up to four remote digital temperature sendigital DVM readout or analogue trace
Stop Bits: 1
sors, DS1820 or DS18S20, can be connect- 4 channels record simultaneously
ed to this kit. Only one sensor is supplied in minimum / maximum sample hold function
Not Included:
this kit.
timescale: 1 sec. - 1000 sec. per division
A free serial RS232 port on a PC
screens or data can be saved and recalled
A serial cable 9-way plug to socket: (AB419) Use a terminal program or download the
software from the Internet to capture a con- automatic recording option (long recordings)
MANUFACTURED BY: ELECTRONICS123 tinuous temperature data stream. A jumper is on screen markers for time and voltage
used to select either Degrees Celsius or
DLL included for transferring Waveform Data
Fahrenheit temperature calibration. This kit
to an Excel Spreadsheet
does not require an external power supply
as the computer’s serial port powers it.
AB609
02.54
ONE CHANNEL DIGITAL PC SCOPE
The kit is a single channel digital storage
oscilloscope, using a computer and its monitor to display waveforms. All standard oscilloscope functions are available in the
Windows program supplied. Its operation is
just like a normal oscilloscope. Connection is
through the computer's parallel port, the
scope is completely optically isolated from
the computer port.
Features and General Information:
frequency response: 0Hz - 12MHz (± 3dB)
single channel
input impedance: 1Mohm / 30pF
markers for voltage, time and frequency
vertical resolution: 8 bit
auto setup function
optically isolated from computer
record and display of screens and data
supply voltage: 9 - 10Vdc / 500mA
dimensions: 230 x 165 x 45mm
weight: 400g
minimum system requirements:
IBM compatible PC, Windows 95, 98,
ME, (Win2000 or NT possible),
PC-Lab2000 v1_36.zip or later,
SVGA display card (min. 800x600),
free printer port LPT1, LPT2 or LPT3
Specifications:
Oscilloscope:
timebase: 0.1µs - 100ms per division
trigger source: Channel 1 or free running
trigger level: adjustable per ½ division
input sensitivity: 10mV - 3V / division
record length: 4096 samples
sampling frequency: 800Hz - 32MHz
(Real time)
true RMS readout (only AC component)
Transient recorder:
timescale: 20ms - 2000s / division
max. record time: 9.4hour / screen
automatic storage of data
automatic recording for more than 1 year
markers for time and amplitude
zoom function
Spectrum analyser:
frequency range: 0 .. 400Hz - 16MHz
linear or logarithmic timescale
zoom function
optional: (not included)
insulated measurement probe x1 / x10:
EB310 / GB407
soft carrying case: GB577
adapter 9Vdc / 850mA: AB006
MODULE ORDER CODE: GB835 / GB823
PC FUNCTION GENERATOR
0 - 1MHZ
PC DATA ACQUISITION UNIT
This DDS, (direct digital wave synthesis),
signal generator kit has to be connected to
your PC printer port.
Features:
frequency range: from 0.01Hz to 1MHz
crystal-based stability
optically isolated from the PC
low sine wave distortion
TTL-level synchronisation output
stores up to 32K of waveform points
you can create your own waveforms with
the integrated signal wave editor
function generator screen with signal
preview
predefined library waveforms are included:
noise, sweep, ...
standard waveforms: sine, square, triangle
extended bode plot possibility, used with
Velleman PC oscilloscopes
can be chained with Velleman PC
oscilloscopes to the same PC printer port
(LPT1, 2 or 3)
includes:
enclosure, user manual, CD with
PC-Lab2000 Windows™ software:
95, 98, ME, Win2000, XP or NT possible
for the function generator and Velleman
PC oscilloscopes
IBM compatible PC, Windows 95, 98, ME
(Win2000 or NT possible),
mouse, CD-ROM,
and free printer port LPT1, LPT2 or LPT3
Specifications:
maximum sample rate: 32M samples / sec.
direct digital wave synthesis (DDS)
32K wave table
distance control via RS232
frequency setting resolution: 0.01%
amplitude range: 100mVpp to 10Vpp with
a 600 Ohm output load
amplitude resolution: 0.4% of full scale
offset: from 0 to -5V or 0 to +5V max.
(resolution 0.4% of full scale)
vertical resolution: 8 bits (0.4% of full scale)
typical sine wave distortion (THD): < 0.08%
output impedance: 50 Ohm
supply voltage: 12Vdc
supply current: 800mA
PC parallel cable: GB714
output signal connecting cables
adapter 12Vdc / 800mA
MODULE ORDER CODE: GB840 / GB648
Use the parallel port of your PC as a real
world interface. It enables your PC to both
monitor & control external events and
devices. The world is a mixed analog & digital world. With the appropriate sensors the
PC can monitor physical variables such as
pressure, temperature, light intensity, weight,
switch state, movement, relays, etc, process
the information and then use the result to
control physical devices such as motors,
sirens, other relays, servo motors (up to 11)
& two stepper motors.
Hardware Features:
Eight digital Outputs. Open collector, 500mA,
33V max.
Sixteen Digital Inputs. 20V max. Protection
1K in series, 5.1V zener to ground.
Eleven Analog Inputs. 0-5V, 10 bit
(5mV/step.)
One Analog Output. 0.2.5V or 0-10V. 8 bit
(20mV/step.)
Small plastic box (140mm x 110mm x
35mm) with screen printed front & rear panels supplied.
Connected to the PC by a 25 pin straight
through cable.
Software utilities & programming examples
supplied.
Seven pages of documentation plus
schematic. Requires heatsink (supplied.)
02.55
SERIAL ISOLATED I/O MODULE
Serial Isolated I/O Module. 8-Relay Module
An extension of our Kit 74, PC controlled 8Relay Board with safe & protected 250V
switching relays and added features. It is in
a plastic case, latched relay operation,
250V/12A certified relays switched by using
Dinkle connectors (250V rated), and with 4
external inputs. Supply 9-12Vdc, 500mA min.
Programmable. Comes with case and end
panel pieces as shown in the photos. Uses
serial port so it can be located over 100
yards from the PC. After programming the
PC can be disconnected.
USB EXPERIMENT
INTERFACE BOARD
This kit is an interface board that has 5 digital input channels and 8 digital output channels. There are also two analogue inputs
and two analogue outputs with 8 bit resolution. The number of inputs/outputs can be
further expanded by connecting more (up to
a maximum of four) cards to the PC's USB
connectors. All communication routines are
contained in a Dynamic Link Library (DLL).
You may write custom Windows (98SE,
2000, Me, XP) applications in Delphi, Visual
Basic, C++ Builder or any other 32-bit
Windows application development tool that
supports calls to a DLL. The diagnostic software with its DLL is supplied with this kit.
Features:
Diagnostic / Test Software:
separate output / input testing
clear all / set all function
counter function on inputs 1 and 2 with
adjustable debounce (max 2kHz depends
on the total I/O load)
analogue output set sliders
analogue input bar-graph indication·
Minimum System Requirements:
Pentium class CPU
USB1.0 or higher connection
Windows 98SE or higher
(Windows NT excluded)
CD ROM player and mouse
Specifications:
Conversion Time: 20ms per command
Diagnostic software with DLL included
5 digital inputs (0= ground, 1= open)
(on board N.O. test buttons are provided)
2 analogue inputs with attenuation / amplification option (test +5V reference provided)
8 digital outputs with indicator LEDs
open collector type (max. 50V/100mA)
2 Digital to Analogue Conversion (DAC)
Analogue outputs:
Voltage Range: 0 to 5V (8 bit resolution)
Output Resistance 1.5k Ohm
2 Pulse Width Modulation (PWM) outputs:
Duty Cycle Range: 0 - 100%
open collector type (max. 40V/100mA)
Power Supply: via USB connector: 70mA
Requires an USB Cable (AB176)
PC INTERFACE BOARD
be used in certain control applications, or
certain control functions are to be carried
our, then an interface is needed. This kit is
an interface card that excels in its simplicity
of use and installation. The card is connected in a very simple way to the printer port
(there is no need to open up the computer).
Likewise there is no need to install an extra
printer port, even if a printer is to be used.
The printer can be connected to the card in
the usual manner. Connection to the computer is optically isolated, so that damage to
the computer from the card is not possible.
The Software works under Dos, Win3.11,
Win95, Win98 or WinME. The card may be
controlled using Turbo Pascal, Qbasic,
Visual Basic or C++ procedures. These procedures are pre-programmed and are provided along with test and example programs
on the supplied diskette. The card has 16
optically isolated digital connections that can
be configured as either inputs or outputs (eg.
6 inputs and 10 outputs). Furthermore, the
card has 9 analogue outputs, of which one is
high precision, and 4 analogue inputs. the
card is simply connected to the printer port.
If it is desired to use the interface card independently, without connecting to a computer,
it can be done using the Independent
Programmable Control Module (GC060). The
Stepper Motor Card kit, (GC061), requires
this interface card to operate. The digital outputs can also be connected to the Universal
16 Relay Card (GC055).
Specifications:
Digital outputs are optically coupled open
collector type: 50mA max. 30Vdc
Digital inputs are optically coupled: 5V/5mA,
max. 20V/40mA
Analogue outputs:
8 outputs DAC1 to DAC8 with Resolution:
64 steps
min. Output Voltage: 0.1V at 2mA
max. Output Voltage: 11.5V adjustable at
2mA
Resolution per step from 0.1 to 11.5V:
160mV +/- 90mV
1 Precision Output DA1, with Resolution:
256 steps
min. Output Voltage: 0V
max. Output Voltage: 4.5V adjustable at
0.5mA
Resolution per step from 0 to 4.5V:
17.5mV
Analogue inputs:
4 analogue inputs AD1 to AD4 with
Resolution: 256 steps
min. Input Voltage: 0V
max. Input Voltage: 5V
Input Impedance: 50Mohm
Resolution per step: 19.5mV
Communication Protocol: I²Cbus
LED indication for each I/O
25 pin D-type connector for computer
25 pin D-type connector for printer
Hint: Resistor R19 must be changed:
Replace the supplied 47 Ohm resistor with a
100 Ohm (DB044) (not included).
This kit is used to enable a computer to
communicate with the outside world. A computer is usually fitted with a keyboard, a display and perhaps a mouse. If however it is to
02.56
INDEPENDENT PROGRAMMABLE
CONTROL MODULE
This programmable controller kit has to be
used together with the PC Interface Board
(GB693). If it is desired to use the interface
board independently, without connecting to a
computer, it can be done using this kit. It can
easily be connected to the PC interface
board, via 5 wire connections, and once programmed by a computer it can be decoupled
from the computer and the system can continue to work independently. Programming of
this kit is done using its own 64 instruction
set, developed for this purpose, to write a
program of around 2500 instruction. The
instructions can be divided into the following
groups:
Branch: to skip part of the program
Timer: to start and stop time delays
Bit: to execute logical operations between
different bit variables
Comparison: to compare analogue values
Byte: to process analogue variables
Conversion: to convert bit variables to byte
variables and the other way round
The program can only be stored if the back
up batteries have been inserted in its holder.
The latest software version for this kit is
available from:
Velleman Product Code: K8001
Please note that this kit is not suitable for
use with the stepper motor card (GC061).
Specifications:
Supply Voltage: 5Vdc (regulated)
from the PC Interface Board (GB693)
Battery Back Up: 3 x 1.5V AA-cells,
Battery Back Up Current: 100mA
Independent control and monitoring of up to
four PC Interface Boards
Communication Protocol: I²Cbus
Time bases of 1, 2, 4, 8, 16, 32 and 64sec.
Eight programmable timers
Delays up to 128sec. in steps of 0.5sec.
Delays up to 9 hours 6 minutes in steps of
128sec.
Own Instruction Set: 64 commands
Instruction Cycle Time: 145msec. (average)
Volatile Memory: around 2500 instructions
Program is written via any ASCII word
processor on a MS-DOS machine
Compiler and programming software is
supplied for MS Windows
Programmed by a computer printer port via
the required PC Interface Board (GB693)
Not Included:
PC Interface Board Kit: (GB693)
4 CHANNEL COMPUTER SWITCH
Not Included:
A free serial RS232 port on a PC and
A serial cable 9-way plug to socket: (AB419)
8 CHANNEL COMPUTER SWITCH
This module enables one to switch up to 4
different electronic devices independently
using a personal computer. It is connected to
the computer’s printer port, LPT1, and is
controlled by the included software. The user
manual is also included on disk. An additional 25 pin D-type connector (JB048) is
required for connecting the output wires. The
module may only be operated with a DC
voltage supply and the total current of all 4
outputs added together should not exceed
2A. Voltages in the range 6 - 24Vdc can be
switched at the outputs. Use additional
relays (DB003) and a 12Vdc supply (AA729)
to switch larger load currents. 4 LEDs indicate which channel(s) are switched on. The
module is electrically isolated from the computer by means of optocouplers.
Not Included:
25 pin D-type Connector: (JB048)
4 Relays: (DB003)
SERIAL RELAY MODULE
AB608
This serial relay module has four relay
switches that can be switched on or off individually by a PC. It makes use of a pre-programmed microcontroller. Data communication is done via the serial port of a PC. Data
must be in ASCII character format that can
be sent with Hyper Terminal, a standard
Windows communication program. This
module is ideal for programmers who want
to quickly test their own serial interface programs or speed up the design process of a
product. Computer software is not included.
Specifications:
4 Indicator LEDs: each relay switch has one
red LED that shines when the respective
relay is switched on
Number of Relay Switches: 4
Output Relay Contacts: each relay is SPDT
with the following three switch contacts:
1 N.O. (normally open),
1 N.C. (normally closed) and
1 COM. (common)
Relay Contact Rating: max. 10A / 230Vac
Parity Bits: none
Data Bits: 8
Stop Bits: 1
loaded up to 3A each at maximum. By
means of the enclosed software it is possible
to switch on and off up to 8 different appliances at different times. It is also possible to
programme certain switching sequences
(also for several days) or attractive effect
lighting for stages and discotheques! The
module has to connected at the printer port
of a standard PC. Diskette 3.5’ is enclosed.
With DOS-software from AT286 and WIN 9X
software from P100 on.
Operating voltage of the relay board: 12VDC
SERIAL LCD MODULE
This module enables one to switch up to 8
different electronic devices independently
using a personal computer. It is connected to
the computer’s printer port, LPT1, and is
controlled by the included software. The user
manual is also included on disk. An additional 25 pin D-type connector (JB048) is
required for connecting the output wires. The
outputs are 8 solid-state-relays that can
switch maximum 0.4Adc or 0.2Aac per channel. The maximum voltage that can be
switched at an output is 40V (dc or ac). Use
additional relays (DB003) and a 12Vdc supply (AA729) to switch larger load currents.
The module is electrically isolated from the
computer by means of optocouplers.
Not Included:
25 pin D-type Connector: (JB048)
8 Relays: (DB003)
AB607
This serial LCD (liquid crystal display) module can be used to display alpha-numerical
messages that are sent from a PC. It makes
use of a pre-programmed microcontroller.
Data communication is done via the serial
port of a PC. Data must be in ASCII character format that can be sent with Hyper
Terminal, a standard Windows communication program. This module is ideal for programmers who want to quickly test their own
serial interface programs or speed up the
design process of a product. Computer software is not included.
Specifications:
This module is powered by the serial port
and does not require an external power supply
Current Consumption: 6mA max.
PARALLEL PORT PC RELAY
Display:
BOARD WITH 8 RELAYS 12VDC
16 characters x 2 line alpha-numeric LCD
(it does not have a backlight)
Displayed Characters:
This serial LCD module can display most
of the printing characters in the ASCIItable within the range: 20h to 7Eh
Implemented Control Characters:
Do you have an old PC lying around the
Clear Screen: 02h
house which absolutely no one wants? Then
Bell / Buzzer: 07h
you can convert it into a dedicated controller.
Backspace: 08h
Communicate with the real world via the parLine Feed: 0Ah
allel printer port on you PC. Simply connect
the printer cable from the computer to the
Centronics connector on the relay board.
Parity Bits: none
There are 8 relays, each capable of switchData Bits: 8
ing 12VDC/10A or 240VAC/5A. Each relay
Stop Bits: 1
has a LED to indicate when it is operated.
We provide two sets of complete, standNot Included:
alone software to control the relays: one
works under DOS so you can write your own A free serial RS232 port on a PC and
A serial cable 9-way plug to socket: (AB419)
batch files to control individual relays, the
other under Windows 3.1.
Power supply: 12VDC
INTRODUCTION TO LCDs
8-CHANNEL-RELAY BOARD
The device is suitable for switching different
appliances, lamps or motors by means of a
computer program. The relay points can be
02.57
Introduction to LCDs. Learn how to connect
a 2x16 LCD to a PC parallel port. First this
kit will show you how to write keystrokes
from the PC keyboard to display on the LCD.
It will show you how to process this data
(rotate the string left and right.) All the code
is provided. Second, there is an on-board
DS1620 to measure temperature. The temperature is displayed in F or C. Just press a
button to display either. With the DS1620
you may set breakpoints to turn a thermostat
on/off. We provide all the code to do this.
Once the DS1620 is programmed it may be
removed and placed in another device for
temperature control. Many web references
are given.
MICRO CONTROLLERS
PIC EXPERIMENTATION
PROGRAMMERS
INTRODUCTION TO THE PIC16F84
DEVELOPMENT
PROGRAMMER FOR PC
can be reprogrammed up to 1000 times. It
has test push-buttons and LED indicators to
carry out educational experiments as
described in the programming examples.
Software and one PIC16F627 is supplied.
This kit has to be connected to the serial
port of a computer.
IBM compatible PC, Pentium or better
Windows™ 95 / 98 / ME / NT / 2000 / XP
CDROM
free serial RS232 port
Specifications:
Supplied: Software to compile and program
your source code and
one 18 pin PIC16F627 microcontroller
suitable for programming Microchip FLASH
PIC microcontrollers like:
8 Pin: PIC12F629, PIC12F675
14 Pin: PIC16F630, PIC16F676
18 Pin: PIC16F83, PIC16F84, PIC16F84(A),
PIC16F627, PIC16F627(A), PIC16F628,
PIC16F628(A), PIC16F648(A), PIC16F818,
PIC16F819
28 Pin: PIC16F870, PIC16F872, PIC16F873,
PIC16F873(A), PIC16F876, PIC16F876(A)
and other FLASH PICs that fit the 4 sockets
This ICSP PIC programmer module is connected to your PC using the USB port. It can
only program FLASH PICs. It can program
the same PICs as the “ALL-FLASH USB
PORT PIC PROGRAMMER” kit, (AB121). It
does not have a programming socket as it
can only be used for ICSP programming via
the supplied 5 wire cable. It is not the purpose of this module to teach ICSP. It makes
use of the user interface software
MicroPro.exe that has to be down loaded
from the Internet. This module is powered by
the serial port and does not require an external power supply. An USB Cable A plug to B
plug (AB176) is required.
PIC PROGRAMMERS
ATMEL PROGRAMMERS
ALL-FLASH, USB PORT
PIC PROGRAMMER
ATMEL 89CXXXX PROGRAMMER
16VDC
ICSP, FLASH, USB PORT
PIC PROGRAMMER
AB613
SB043
The PIC16F84 has fast become the entry
point for hobbyists and beginners into micro
controller programming. This kit contains a
PIC16F84A micro controller, that is used for
programming, and all the components and
hardware that are required for programming
and testing. The software is easy to use and
is written for use on Windows 9x / NT / 2000
operating systems. The software and 40
page user manual is available on the
Internet. Four detailed, fully commented
source code examples are explained that
make the 5 on-board LEDs flash in a variety
of ways.
Specifications:
Supply Voltage:
17 to 30Vdc or
13 to 20Vac
PIC PROGRAMMER AND
EXPERIMENT BOARD
This is a FLASH PIC programmer kit. It is
ideal for experimenting with flash PICs that
This is a PIC programmer that is connected
to your PC using the USB port. This programmer does NOT program non-Flash
chips! Please make sure you know which
PIC chips are Flash (the ones with the 'F'!)
and which are not. It can also be used for
ICSP programming via the supplied 5 wire
cable. It makes use of the user interface
software MicroPro.exe that has to be down
loaded from the Internet.
http://www.kitsrus.com/upuc.html. Some
PICs that it can program: 12F629, 12F675,
16F627, 16F627A, 16F628, 16F628A,
16F630, 16F648A, 16F676, 16F684,
16F688, 16F73, 16F74, 16F76, 16F77,
16F737, 16F747, 16F767, 16F777, 16F83,
16F84, 16F84A, 16F87, 16F88, 16F818,
16F819, 16F870, 16F871, 16F872, 16F873,
16F873A, 16F874, 16F874A, 16F876,
16F876A, 16F877, 16F877A, 18F242,
18F248, 18F252, 18F258, 18F442, 18F448,
18F452, 18F458, 18F1220, 18F1320,
18F2220, 18F2320, 18F4220, 18F4320.
This kit is powered by the serial port and
does not require an external power supply.
Most components are already pre-soldered,
but some thru-hole components should still
be soldered onto the PCB. An USB Cable A
plug to B plug (AB176) is required. Please
note: although the ZIF socket (BB007) is not
included, a 40 pin IC socket is included.
02.58
This kit is a powerful programmer for the
Atmel 8051 family of microcontrollers. It supports the following devices: 89C1051,
89C2051, 89C4051, 89C51, 89LV51, 89C52,
89LV52, 89C55, 89LV55, 89S8252,
89LS8252, 89S53 and 89LS53. The programmer connects to the computer using a
serial port. All the programming intelligence
is built into the programmer so you do not
need any special software to run it. Uses any
terminal emulator program capable of ASCII
text file transfer. On-board firmware supplied.
Supply Voltage: 16VDC
PCB size: 118x70mm
ATMEL AVR PROGRAMMER 12VDC
This kit is a powerful programmer for the
Atmel AT90Sxxx (AVR) family of microcontrollers. The following AVR devices are sup-
ported: AT90S1200, AT90S2313, AT90S4414
and AT90S8515. It can also program the
AT90S4434 and AT90S8535 using kit
(AB120). It uses the serial port so it can use
any terminal emulation software. W95/98
use Hyperterminal. On-board firmware supplied.
Supply Voltage: 12VDC
PCB size: 109x68mm
ADAPTER BOARD FOR
AT90S4434 AND AT90S8535
This is the adapter board kit that enables
one to program the AT90S4434 and
AT90S8535 using kit (EB223).
OTHER PROGRAMMERS
BASIC Stamp microcontrollers, manufactogether with one DC-power plug (AA582)
tured by Parallax, have been used by engiMODULE ORDER CODE: AB697
neers and hobbyists since 1992. BASIC
MANUFACTURED BY: PARALLAX
Stamps are microcontrollers (tiny computers)
BASIC STAMP 2
that are designed for use in a wide range of
STARTER KIT
electronic and robotic projects that require a
level of intelligence.
Programming is done in PBASIC specifically
for the BASIC Stamps. This programming
language is simple and easy to learn. It
includes many BASIC instructions like:
GOTO, FOR...NEXT, IF...THEN, etc. PBASIC
also includes unique instructions like: PWM,
SERIN, COUNT, etc.
BASIC Stamp1 IC.
The BASIC Stamp 1 starter kit is built around
the BS1-IC (BASIC Stamp 1 IC). The BASIC
Stamp IC contains a BASIC Interpreter chip,
internal memory (RAM and EEPROM), a 5V
regulator, a number of general-purpose
(TTL-level: 0 - 5 volt) I/O (input / output) pins
and a set of built-in commands for mathematical and I/O functions.
PROGRAMMER FOR 8 BIT
SERIAL EEPROMS
This PC parallel port programmer kit is used
to program 8-bit, serial EEPROMS. It programs the following 24xxx and 93xxx series
EEPROMS: (generic part numbers)
2401, 2402, 2404, 2408, 2416, 2432, 2464,
24128, 24256,
9346, 9356, 9366, 9376, 9386
You can use a 16 pin ZIF socket (not included) for volume programming.
Supply Voltage: 9 - 12Vdc / 150mA adapter
Download the software from the Internet:
“EEPROG.EXE” http://kitsrus.com/soft.html
The software is DOS based but will run
under Windows 3.1, Windows 9x and
Windows NT4 (service pack 5).
BASIC STAMP 1
STARTER KIT
BASIC Stamp Super Carrier.
The picture above shows the BASIC Stamp
Super Carrier Board with the BS1-IC properly inserted into the socket. This board provides prototyping space for simple or moderate circuits. It has a 3-pin programming connector for conneting to a personal computer
for programming the BS1-IC. On-board reset
button, 9V-battery clip, DC-power connector,
5V-regulator and power indicator LED.
Includes:
BASIC Stamp 1 Module (BS1-IC)
BASIC Stamp Development Software on CD
BASIC Stamp Manual
BASIC Stamp Super Carrier Board
BASIC Stamp 1 Serial Adapter
16MB of RAM
1MB of available hard drive space
mouse, CD-ROM and
free printer port LPT1, LPT2 or LPT3 (DB25)
Specifications:
Programming Language: PBASIC
Number of PBASIC Commands: 32
Microcontroller: Microchip PIC16C56A
Processor Speed: 4 MHz
Instruction Rate: 2000 instructions per sec.
Program Size: 80 instructions
Number of I/O Pins: 8
PC Interface: Serial Printer Port connection
Text Editor Windows Software: Stampw.exe
Required: (not included)
9V-battery (EB160) or
230Vac to 6 - 15Vdc Power Adapter (AA729)
02.59
BASIC Stamp microcontrollers, manufactured by Parallax, have been used by engineers and hobbyists since 1992. BASIC
Stamps are microcontrollers (tiny computers)
that are designed for use in a wide range of
electronic and robotic projects that require a
level of intelligence.
Programming is done in PBASIC specifically
for the BASIC Stamps. This programming
language is simple and easy to learn. It
includes many BASIC instructions like:
GOTO, FOR...NEXT, IF...THEN, etc. PBASIC
also includes unique instructions like: PWM,
SERIN, COUNT, etc.
BASIC Stamp2 IC.
The BASIC Stamp 2 starter kit is built around
the BS2-IC (BASIC Stamp 2 IC). The BASIC
Stamp IC contains a BASIC Interpreter chip,
internal memory (RAM and EEPROM), a 5V
regulator, a number of general-purpose
(TTL-level: 0 - 5 volt) I/O (input / output) pins
and a set of built-in commands for mathematical and I/O functions.
Board of Education.
The picture above shows the Board of
Education programming board with the BS2IC properly inserted into the socket. This
board provides a small breadboard for quickly prototyping simple or moderate circuits. It
has a DB9 programming connector for conneting to a personal computer for programming the BS2-IC. On-board reset button, 4
servo connectors, 9V-battery clip, DC-power
connector, 5V-regulator and power LED.
Includes:
BASIC Stamp 2 Module (BS2-IC)
BASIC Stamp Development Software on CD
BASIC Stamp Manual
BASIC Stamp Board of Education
Small Component Pack
10 Jumper wires
Serial Cable
16MB of RAM
1MB of available hard drive space
mouse, CD-ROM and
free serial port (DB9)
Specifications:
Programming Language: PBASIC
Number of PBASIC Commands: 42
Microcontroller: Microchip PIC16C57C
Processor Speed: 20 MHz
Instruction Rate: 4000 instructions per sec.
Program Size: 500 instructions
Number of I/O Pins: 16
PC Interface: Serial Port DB9 connection
Text Editor Windows Software: Stampw.exe
9V-battery (EB160) or
230Vac to 6 - 15Vdc Power Adapter (AA729)
together with one DC-power plug (AA582)
MANUFACTURED BY: PARALLAX
(IR)
REMOTE CONTROLLERS
INFRA-RED TOGGLE SWITCH 815VDC
LED will light up and indicate that the
infrared remote control is operated. As
accessories is available our kit FB631 Relay
Card. This could be connected with the
Infrared Detector and it is then possible to
switch through the relay contact loads up to
6 A.
IR REMOTE CHECKER
This kit makes it easy to check that an IR
(infra red) remote operates properly. Simple
operation: point the remote at this kits IR
sensor and push any button. 4 Flashing
LEDs indicate remote operation.
Specifications:
Power Supply: 9V battery (not include)
2-CHANNEL IR TRANSMITTER
This is an IR (infra-red) toggle switch that
will work with any button on any modern IR
remote control such as a TV IR remote control unit. Press any button on the IR remote
and the (SPDT) 1A on-board relay will switch
on. Press any button later and the relay will
switch off. The on-board Kodenshi IR receiver module detects IR light that is on-off-modulated at 37.9kHz. One D-type flip-flop is
configured as a toggle flip-flop. This toggle
flip-flop does not only perform the latching
function of the relay, but also toggles the
relay between an on or off state.
Specifications:
INFARED DETECTOR
2-CHANNEL IR
REMOTE RECEIVER
This is a 2-channel IR (infra-red) remote
receiver kit with a program push-button
switch. Any of the following IR transmitters
can be used to control this kit:
2-Channel IR Transmitter (AB299) or
15-Channel IR Transmitter (AB305) and
15-Channel IR Remote Stick (AB307)
The 2 output relay switches can be programmed individually for toggle or pulse
operation. Settings are stored in EEPROM.
Specifications:
Power Supply: 12Vdc
Two Channels
Infra-Red Light Code Receiver
3 LED Indicators:
2 LEDs: indicates which relay(s) is on
1 LED: programming and signal receive
2 Output Relays: 1A SPST (COM, NO)
momentary or toggle operation setting
Range: 15m max. (when used indoors)
12 CHANNEL IR REMOTE
RELAY BOARD 12VDC
This kit consists of a commercial 14-button
infra-red (IR) remote control unit and a 12
This 2-channel, keychain-style, IR transmitter kit is used to control the 2-Channel Infra- relay IR receiver board. This kit makes it
red Remote Receiver (AB298). Easy channel very easy to add an IR remote control sysconfiguration using the 2 push-button switch- tem to any project or existing equipment.
One button is assigned to each relay output
es, there are no jumpers required.
with its own indicator LED. Outputs can be
Specifications:
set for momentary or toggling operation.
Specifications:
(not included)
Power for IR remote: 2 x 1.5V AAA cells
Two Channels
Supply Voltage: 12Vdc / 500mA adapter
Transmitter Range: max. 15m
(only when used indoors)
Infra-Red Light Code Transmission
Coding: 16 possible channels
Single LED: transmit-indication
With the aid of this circuitry it is made possible to carry out functional tests of infrared
remote controls used in TV-sets and video
devices, etc. Whenever there is radiation of
infrared beams on the Special-Sensor, the
02.60
IR REMOTE CONTROLLER
AND DECODER IC
15-CHANNEL IR REMOTE STICK
This kit makes it easy to build your own IR
(infra red) remote operated system.
This kit contains:
A commercial 14-button remote control unit
that transmits digital coded IR pulses when a
button is pressed.
A 3-pin IR receiver module that converts the
modulated 38kHz IR signal into electric digital data pulses.
A pre-programmed microcontroller that is
used to decode the received digital data
pulses. It sets only 1 of its 14 output pins
active low when receiving a valid code.
All the required components for the microcontroller are also supplied:
A 12 MHz ceramic resonator used for the
oscillator, resistor, capacitor and diode for
the power-on reset circuit and
two 10k Ohm pullup resistors.
A sample application / test circuit diagram, a
330 Ohm resistor and a LED are also supplied for testing.
Note that the PCB is not supplied, it is up to
the user to test on breadboard and make
their own PCB. Ideal for practical classes!
Specifications:
Power Supply:
Remote Control: 2 x 1.5V AAA cells not incl
Receiver IR module and decoder IC: 5Vdc
This is a 15-channel IR (infra-red) transmitter
kit. Its enclosure has a sleek design. It has 2
push-button switches. It can be set to 1 of 3
addresses, allowing the use of up to 3
receivers in 1 room. Consequently 3 transmitters can access 45 channels in 1 room.
The built-in ‘all clear’-function allows the user
to turn-off all channels of the current address
at the same time. You can operate the
remote and select the correct channel even
in total darkness.
Features:
It can be used with:
2-Channel IR Remote Receiver (AB298),
15-Channel IR Receiver (AB306),
IR Remote Controlled Dimmer (GC053) and
1-Channel IR Receiver (GC054).
Specifications:
Power Supply: 2 x 1.5V AAA-cells (not
included)
Range: 20m max. using IR receiver (AB306)
Up to 15 channels can be operated
Single push-button channel selection and
operation
LED Function Indication
15-CHANNEL IR RECEIVER
15-CHANNEL IR TRANSMITTER
This is a 15-channel IR (infra-red) receiver
This is a 15-channel IR (infra-red) transmitter kit.
Features:
kit. It has 10 rubber keypad push-button
switches. 4 Addresses allow the use of up to It can be controlled by:
4 receivers in 1 room. For example 3 trans- 15-Channel IR Transmitter (AB305)
mitters can access 45 channels in 1 room.
Its 15 open-collector outputs can be connectFeatures:
ed to the following relay cards:
It can be used with:
4 Relay Card (GC058)
2-Channel IR Remote Receiver (AB298),
8-Channel Relay Card (AB308)
15-Channel IR Receiver (AB306),
IR Remote Controlled Dimmer (GC053) and Universal Relay Card 8 Relays (GC056)
Universal Relay Card 16 Relays (GC055)
1-Channel IR Receiver (GC054).
Specifications:
Specifications:
Power Supply: 2 x (6 to 12)Vac or
8 to 14Vdc
included)
Range: 20m max. using IR receiver (AB306) Supply Current:
Standby Current: 10mA
All Outputs On: 150mA
Outputs: (each is pulled active low when on)
Rubber Keypad
15 NPN Bipolar Junction Transistor OpenLED Function Indication
Collector Screw Terminals Connections
02.61
Current Rating per Output: max. 50mA / 50V
LED Indication for each output
Transmitter - Receiver Range: 20m max.
Operating Modes: (4 modes)
15 independent outputs or
15 rotary outputs or
7 independent and 8 rotary outputs or
7 rotary outputs and 8 rotary outputs that
are independent of each other
Address Selection: (3 addresses)
allows the use of up to 3 receivers in one
room using 3 transmitters, like (AB305) or
(AB307), that should each be set for use
with a specific receiver
IR REMOTE CONTROLLED DIMMER
This is a single channel IR dimmer kit that
can be used together with: (not included)
This kit can be set to receive 1 of 15 transmitter codes so that 15 dimmers can be
operated, independently of each other, in the
same room. It has two memories to preserve
distinct dimmer presettings. A front plate with
a push-button panel key is supplied. Thanks
to its compact design this kit fits into a standard light switch housing. Please note that
this dimmer is not suitable for halogen lights.
Specifications:
Suppressed TRIAC Output: 2A max.
Power Output: 440 Watt max.
Channels: select only one of 15 channels
Addresses: 4
Memory: for 2 dimming, or on/off, states
Panel Push-button: for local dimmer control
Dimmer can be set for:
dimming to adjust brightness of bulbs only
toggle, change on/off state with each press
pulse output, only on as long as you press,
IR Transmitter-Receiver Range: 7m max.
Front Panel Dimensions: 85 x 85mm
1-CHANNEL IR RECEIVER
This is a single channel IR receiver kit that
can be used together with: (not included)
This kit can be set to receive 1 of 15 transmitter codes so that 15 receivers can be
operated, independently of each other, in the
same room. It has a relay output switch.
Specifications:
Channels: select only one of 15 channels
Addresses: 4
2 Memories: each saves an on or off state
1 Push-button: for local control
Receiver can be set to:
toggle, change on/off state with each press
pulse output, only on as long as you press,
IR Transmitter-Receiver Range: 9m max.
LED Indicator: shines when the relay is on
Output Relay: SPDT, N.O., N.C., COM with
max. 5A / 220Vac contact rating
Noise Suppressor for the relay contacts
Dimensions:
Part 1: 37 x 48mm, 17mm height
Part 2: 47 x 48mm, 25mm height
(RF)
REMOTE CONTROLLERS
2-CHANNEL RF CODE-LOCK
REMOTE TRANSMITTER
10-CHANNEL, 2-WIRE
REMOTE CONTROL
This is a keychain-style RF transmitter kit
with 2 push-button switches. It can be used
to control the “2-Channel RF Code-Lock
Remote Receiver” kit (AC908) or the assembled 2-channel receiver module (AB319).
Specifications:
(not included)
Two Channels
SAW resonator is used
Range: 30m max. (only when used outdoors)
This kit allows you to control up to 10
Approved Design: according to
devices using only 2 wires, over a long disI-ETS 300 220
tance, between the sender and receiver.
Coding: generates unique 32-bit code
Microprocessor controlled. The 10 inputs, at more than 1,000,000,000 unique codes
the sender, can be controlled with push-but- The code is easily changed
tons, switches or open collector outputs from There are no jumpers required
another device. The receiver has 10 open
Select continuous or 'burst' transmission
collector outputs that allow you to directly
Single LED on / off and battery indication
control externally connected relays. Screw
terminals are used for all input and output
connections. This kit can be used to reduce
the number of wires between the kits:
2-CHANNEL RF CODE-LOCK
User-definable 8-Chan.Touch Panel (AB304)
REMOTE RECEIVER
and the 8-Channel Relay Card (AB308)
Specifications:
Supply Voltage: 12 - 15V AC or DC
Number of Channels: 10
2-Wire Connection Range: 50m
One Input per Channel:
The input has to be pulled active low,
and open-collector output on the receiver
output is off If the input is not connected
Open Collector Outputs: 10 outputs
Each output can sink max. 100mA / 50V
This is a two channel RF code-lock receiver
Dimensions:
kit that works with random code.
Sender: 70 x 50mm, 16mm height
It can be controlled by the “2-Channel RF
Receiver: 103 x 50mm, 25mm height
Code-Lock Remote Transmitter” kit (AC916)
or the assembled 2-channel transmitter modMANUFACTURED BY: VELLEMAN
ule (AB318).
This kit has to be used together with at least
one of these transmitters to form the ideal 2channel remote control system for all kinds
of applications. Some applications: garage
door controller, car alarms and / or central
door locking systems, as well as for wireless
operation of in-door and out-door lighting,
etc. It is possible to use several transmitters
with one receiver and the other way round.
Specifications:
Supply Voltage: 9 to 12V AC or DC
Two Channels with relay output switches
Can be programmed to use any of more
02.62
than 1,000,000,000 unique codes
Can learn 32-bit transmitter codes
Store up to 31 transmitter codes in memory
Programming: using ‘setup’ button and LEDs
4 LED Indicators:
2 to show relay on / off,
2 for mode and timer functions
2 Output Relays: 3A SPDT (COM, NO, NC)
select pulse or toggle operation per output
Pulse Mode: set either of the two relay outputs by pressing the corrosponding transmitter button or set both outputs simultaneously
by pressing the two transmitter buttons at
the same time.
Selectable Output Relay Timers: 0.5s, 5s,
30s, 1min, 5min, 15min, 30min and 60min
keychain RF transmitter:
kit (AC916) or module (AB318)
RF 2-CHANNEL RELAY SWITCH
This kit is a 2-channel version of (AB139)
with a 2 button key-ring RF transmitter and 2
relay receiver board. This RF remote control
system makes use of the rolling code data
encryption technique that is close-to-impossible to brake. This high-security remote control system is ideal for use with alarm systems.
Specifications:
Power Supply:
Transmitter: 12V battery (A23) (DB247)
Receiver: 12Vdc / 200mA
Pre-built transmitter and receiver modules
Operating Frequency: UHF 433MHz
Range: 100m max.
Rolling Code Operation: 7.3 x 1019 codes
Channels: 2 button transmitter, 2 relay
receiver board with 2 indicator LEDs
Output Relays: 2A SPDT (COM, NO, NC)
momentary or toggle operation setting
RF 4-CHANNEL RELAY SWITCH
This kit uses a 4 button (4-channel) key-ring
RF transmitter and 4 relay receiver board.
This RF remote control system makes use of
the rolling code data encryption technique
that is close-to-impossible to brake. This
high-security remote control system is ideal
for use with alarm systems.
Specifications:
Power Supply:
Range: 100m max.
momentary or toggle relay operation
ROLLING CODE 10-CHANNEL
RADIO CONTROL
included)
1 stop bit
Input impedance: selectable 1 or 10 kOhm
RF Control: (this function requires):
433MHz Receiver Module (AB342) with
Rubber Keypad
8-Channel RF Remote Control (AB309)
LED Function / Mode Indication
Output Relay Contacts: each relay is SPST
(single pole single through) with Contacts:
1 x N.O. (normally open) and
1 x COM. (common)
Output Contact Rating: max. 5A / 230Vac
8-CHANNEL RELAY CARD
Relay outputs are all transient suppressed
RELAY UNITS AND
SWITCHES
TOGGLE FLIP-FLOP SWITCH
12V / 5A RELAY CONTACTS
AB682
This kit uses a 4 button key-ring RF transmitter and 10 relay receiver board. This RF
remote control system makes use of the
rolling code data encryption technique that is
close-to-impossible to brake. This high-security remote control system is ideal for use
with alarm systems. The key-ring transmitter’s 4 buttons can be pressed in ten different combinations:
1) press a single button, 1 of 4 buttons, at a
time in order to control 4 channels
2) press two of the 4 buttons simultaneously
at a time, for 1 of 6 different combinations, in
order to control another 6 channels.
Specifications:
Power Supply:
Range: 100m max.
momentary or toggle relay operation
8-CHANNEL RF
REMOTE CONTROL
This is a 8-channel RF (radio frequency)
transmitter kit. It has 10 rubber keypad pushbutton switches. 8 Addresses allow the use
of up to 8 receivers in 1 room. This kit is
used to control the 8-Channel Relay Card
(AB308) (not included). The transmitter has
an ‘all clear’- function that simultaneously
switches off all the relays on the receiver. It
also has a momentarily (pulse) or toggle
(latching) mode for each key.
Specifications:
This 8-channel relay card kit can be used in
several ways:
1) each of the 8 relays can be controlled by
an open-collector output or N.O. (normally
open) switch at each of the 8 inputs. This kit
does not have to be connected to any computer when it is used in this way.
2) the relay card can be remote controlled
using the 8-Channel RF Remote Control kit
(AB309) together with the 433MHz Receiver
Module (AB342) ( both are not included) or
3) the relay card can be remote controlled by
a computer, using the RS232 protocol, via 2
wires.
Since the card can be addressed using
RS232 commands, you may write custom
applications in any programming language
on any platform. Test software can be downloaded from the Velleman web site at:
Velleman Product Code: K8056
DIAGNOSTIC / TEST SOFTWARE:
(only required if one wants to control this kit
by using a computer)
1) separate relay on/off test with momentarily
(pulse) or toggle (latching) function
2) clear all or set all relays function
3) address selection: up to 255 addresses,
one per relay card, can be selected
4) emergency stop switches off all the relays
on a relay card
Minimum Computer System Requirements:
Pentium class CPU
Windows 95 or higher
mouse and free RS232 port
Specifications:
Power Supply: 12Vac or
15 - 17Vdc
Unregulated Output Voltage: 12Vdc / 200mA
Number of Relays: 8
10 Indicator LEDs:
1 Power LED: shines if card is powered
1 Data In LED: indicates incoming data
8 LEDs: one for each output relay switch,
that shines to indicate which relay(s) is on
Input Current drawn for Relay On: 50mA
One Input per Relay Output Switch:
and output relay switch
Relay is off If the input is not connected
RS232 Input:
to drive the card with computer or terminal
baud rate: 2400, no parity, 8 data bits,
02.63
This electronic switch is either on or off and
changes state with every press of a push
button. The on-board relay can switch current loads up to a maximum of 5 Amps
12VDC. An on-board fuse is included for current protection. The switch is controlled by a
remote N.O. push button switch (not included) (code: HB209). An on-board red LED
indicates the state of the relay. A remote indication LED (included) can be connected
directly to the board. It requires a 12VDC or
16-26VAC power supply.
TOGGLE FLIP-FLOP SWITCH
This electronic switch is either on or off and
changes state with every press of a push
button. The on-board relay can switch current loads up to a maximum of 10 Amps
220VAC. An on-board fuse is included for
current protection. The switch is controlled
by a remote N.O. push button switch (not
included) (code: HB209). An on-board red
LED indicates the state of the relay. A
remote indication LED (included) can be
connected directly to the board. It requires a
12VDC or 16-26VAC power supply.
RELAY BOARD
This is a transistor switched relay card kit.
The SPST (single pole single throw) relay is
switched on by any weak, positive going,
input DC-signal of approximately 5mA or
more. It is ideal for use as a switching amplifier for other kits, which only have a LED
(light emitting diode) as output. The input
signal is electrically isolated from the output
relay switch contacts.
Specifications:
Supply Current: 80mA max. (relay on)
Input Signal Voltage Range: 3 - 12Vdc
Input Current: 5mA min.
Output Relay Contacts: SPST with contacts
1 x N.O. (normally open) and
1 x COM. (common)
RELAY SWITCH MAINS POWER
Many electronic projects use a low-voltage
circuit that has to control mains voltage,
(230Vac), electrical devices and appliances.
Well this kit is the answer! It will take a +12V,
high or low going, input signal to switch on
the output relay that can switch 5A / 240Vac
loads. One DPDT (double pole double throw)
relay is used so that both sides of the mains
supply can be switched simultaneously. The
input signals are electrically isolated from the
12V AC/DC RELAY
output relay switch contacts. Screw terminals
12V/5A RELAY CONTACTS
are used for easy connections.
Specifications:
Supply Current: 50mA max. (relay on)
Input Impedance: 8.2 kOhm
Two Inputs for Relay Output Switch:
Input step-down is pulled active low to
switch relay on, input range 0 - 6Vdc
Input step-up is pulled active high to
switch relay on, input range 6 - 12Vdc
Relay is off If the inputs are not connected
This relay module consists of a 12V pcb
Output
Relay Contacts: one DPDT relay
mounted relay with back-EMF diode protecRELAY BOARD FOR 2X 1A
Total number of Contacts:
tion and five pcb mounted screw terminals.
2 x N.O. (normally open),
MINIATURE RELAYS
Two screw terminals, marked ‘VIN’, are used
2 x N.C. (normally closed) and
for connecting 12V to the relay coil. Three
2 x COM. (common)
screw terminals are used for the relay conOutput
Contact Rating: max. 5A / 230Vac
tact connections that are marked ‘N.C’.,
Fuse Protection: 20 x 5mm holder 5A fuse
‘N.O’. and ‘COM’.
LED-indicator: shines when the relay is on
Specifications:
Relay Coil Input Voltage: 12Vac or 12Vdc
Relay Coil Input Current: 37mA at 12Vac
Relay Contact Current Rating: 5A
Relay Contact Voltage Rating: 12V
DUAL RELAY BOARD
Quite often the hobbyist needs to use a com- Dimensions: 30 x 50mm, 20mm height
TRANSISTOR SWITCHED
pact, low power, dual relay unit. This simple
kit is ideal to fill these needs. It consists of 2
SPDT relays, 1 PCB, 2 back-EMF protection
12V AC/DC RELAY
diodes and 10 screw terminal blocks for con220V/10A RELAY CONTACTS
necting the input / output signals. The inputs
(FUSED)
to the 12V relay coils are electrically isolated
from the relay output switch contacts.
Specifications:
Relay Coil Input Voltage: 12Vdc for relay on
connect +12V to ‘+’ and 0V to ‘-’ terminal
This kit has two identical SPDT (single pole
Current Consumption per Relay Coil : 18mA
double throw) relays. Each relay has two low
Output Relay Contacts: two SPDT relays
current, TTL logic level input buffers. The
This relay module consists of a 12V pcb
input signals are electrically isolated from the
mounted relay with back-EMF diode protecoutput relay switch contacts. Screw terminals
tion and five pcb mounted screw terminals.
are used for easy connections.
2 x COM. (common)
Two screw terminals, marked ‘VIN’, are used
Specifications:
Output Contact Rating: max. 1A / 30V
for connecting 12V to the relay coil. Three
screw terminals are used for the relay conSupply Current: 110mA max. (both relays on)
tact connections that are marked ‘N.C’.,
‘N.O’. and ‘COM’. An on-board fuse is used
Two Inputs per Relay Output Switch:
for
protecting
the
relay
contacts.
RELAY CARD 12V
Input L has to be pulled active low to
Specifications:
switch relay on, input range 0 - 0.8Vdc
Relay Coil Input Voltage: 12Vac or 12Vdc
Input H has to be pulled active high to
Relay Coil Input Current: 45mA at 12Vac
switch relay on, input range 2.4 - 12Vdc
Relay Contact Current Rating: 10A
Relay is off If the inputs are not connected
Relay Contact Voltage Rating: 220V
Output Relay Contacts: two SPDT relays
2 x COM. (common)
Quite often the hobbyist needs to use a
relay. To fill this need this simple kit was
made consisting of 1 SPDT, (single pole
double throw), electro-mechanical relay, 1
PCB, 1 back-EMF protection diode and 5
screw terminal blocks. The input to the 12V
relay coil is electrically isolated from the
relay output switch contacts.
Specifications:
Relay Coil Input Voltage: 12Vdc for relay on
connect +12V to ‘+’ and 0V to ‘-’ terminal
Relay Coil Current Consumption: 30mA
Output Relay Contacts: SPDT with contacts
1 x COM. (common)
02.64
must not be mounted. The input signals are
electrically isolated from the output relay
switch contacts. It is ideal for improving the
output capabilities of the following kits:
PC Interface Board (GB693)
4 RELAY CARD
15-Channel IR Receiver (AB306)
10-Channel 2-Wire Remote Control (GC057)
Specifications:
Power Consumption: max. 12W
Output Voltage: 12Vdc / 250mA max.
Number of Relays: 16
Manual Control DIP-Switches: 16
17 Indicator LEDs:
1 Power LED: shines if 230V is connected
16 LEDs: one for each output relay switch,
that shines to indicate which relay(s) is on
Input Impedance:
Connecting a number of relays to the outWhen using ULN2803 ICs: 2.7 kOhm
puts of an electronic network may seem very
Without ULN2803 ICs: 263 Ohm
simple, but in reality it might create some
problems regarding the cabling. This 4 relay
When using ULN2803 ICs:
kit is a compact alternative. It has 4 inputs,
Input accepts TTL / CMOS voltage levels
one for each transistor switched SPDT relay.
Relay On: input range 3 - 30Vdc
Each relay is activated by a negative going
Relay Off: input range 0 - 0.8Vdc
input signal. Can be controlled by a device
Without ULN2803 ICs:
with open-collector outputs. The input sigThe input has to be pulled active low,
nals are electrically isolated from the output
relay switch contacts.
Specifications:
For 12V Supply: replace
Output Relay Contacts: each relay is SPDT
R1, R2, R3, R4 with 82 Ohm: 4 x (AA096)
(single pole double through) with Contacts:
For 6V Supply: replace
R1, R2, R3, R4 with wire jumpers
Supply Current: 340mA max. (4 relays on)
1 x COM. (common)
4 Indicator LEDs: shine when relay is on
Fuse Protection: 20 x 5mm 250mA fuse
MANUFACTURED
BY: VELLEMAN
UNIVERSAL RELAY CARD
WITH 8 RELAYS
Output Relay Contacts: four SPDT relays
4 x COM. (common)
UNIVERSAL RELAY CARD
WITH 16 RELAYS
This 8 relay card kit is a down graded version of the Universal Relay Card with 16
Relays (GC055). It has 8 SPDT 5A / 230Vac
output relays with screw terminals for each.
It has a PCB mount transformer.
Specifications:
Power Supply: 230Vac / 12W
Output Voltage: 12Vdc / 250mA max.
Number of Relays: 8
Fuse Protection: 20 x 5mm 250mA fuse
This 16 relay card kit has screw terminals for
all connections and a PCB mount power
supply transformer is also supplied. The 12V
power supply can be used to power other
electronic devices. Every relay output can be
equipped with a noise suppressor network.
16 DIP-switches are supplied to allow manual control of the relays in case of maintenance work. The relay card can be controlled with TTL / CMOS logic levels when
using the 2 supplied ULN2803 Darlington
transistor array ICs. It can also be controlled
by open-collector outputs, but then these ICs
02.65
MASTER-SLAVE
SWITCHING MODULE 230VAC
This module is useful for switching on or off
a secondary device after the primary 230Vac
device (master) has been powered. For
example: A vacuum cleaner (secondary) is
automatically switched on via the module’s
relay switch when switching on a drilling
machine (primary). The vacuum cleaner will
be switched off automatically after the drilling
machine has been switched off. This module
has to be connected in a power cable of the
230Vac primary device. This module senses
the electric current conducting through the
connected 230Vac primary load and then
swithes the built in, potential-free, SPDT
relay switch. This module can also be used
as an automatic safety-cutoff of a secondary
device when powering the primary device.
Specifications:
Operating Voltage: 230Vac / 410Vac
Output Relay: with COM.,NO.,NC. (SPDT)
Switching Capacity: max. 6A / 230Vac and
max. 10A / 24Vac
AC POWER SLAVE SWITCH
This kit is useful for activating a secondary
“slave” device when a primary “master”
230Vac device starts up. This device can be
used for automatic connection of a vacuum
cleaner when switching on a machine or
automatic safety-cutoff when starting another. This module senses the current conducting to the connected 230Vac primary load
and then swithes the built in, potential-free
relay switch. The secondary device will automatically disconnect a short while after the
primary device has been disconnected. The
device is protected against current variations
in the primary load.
Specifications:
Operating Voltage: 230Vac
Output Power Rating for Primary Device:
400W / 230Vac / 2A max.
Detects small resistive and inductive loads
Adjustable Sensitivity
Minimum Detectable Primary Load: 5W
Output Relay for Secondary Device:
(SPST) with COM. and NO contacts
Relay Switching Capacity: max. 5A / 230Vac
for max. 1100W / 230V secondary load
Output Relay contacts are protected against
voltage spikes that are caused by the switching of inductive loads
2 Power Indicator LEDs: Master and Slave
Dimensions: 83 x 101 x 44.5mm
Weight: 187g
FLUID LEVEL SENSORS
Note: Never use liquid sensors in
an inflammable enviroment, like
liquid gas or petrol, that will
cause fire or explosion. Do not
use the supplied sensors in corrosive chemicals, like acids,
since it will be eroded. Rather
use sensor electrodes that are
made of inert metals.
This kit generates an alarm sound when it
detects water. Incorporated alarm buzzer.
Water sensor can be placed at a distance by
cutting the board and using wires to connect
the sensor.
Specifications:
it will be destroyed.
Specifications:
Supply Voltage: 16 - 18Vdc or 12 - 14Vac
Supply Current: 0.1Adc or 0.3Aac
Output Relay Contact Rating: 240V/3A max.
Dimensions:
Controller PCB: 60 x 104mm
Sensor PCB: 25 x 104mm
FLUID LEVEL SENSOR /
RAIN ALARM 12 V
WATER LEVEL SENSOR 9V
Whenever two bare wires make contact with
water, the light emitting diode will light up.
The device is suitable to set an alarm in
A very useful circuit that constantly monitors case of overflowing rain barrels and gutters.
Optionaly one can connect (FB631), Relay
SMD HUMIDITY ALARM:
the level of any liquid in a container, and
connected with a suitable pump can maintain Card, to this kit that can switch other devices
WATER AND RAIN DETECTOR
(e.g. pumps) up to a maximum current conit within certain limits which you can preset
by placing the maximum and minimum level sumption of 3A.
sensors there. It can also be used as a rain Supply Voltage: 9Vdc
detector. Sensors are not included.
Please note: Never use the sensors in an
inflammable enviroment that will cause fire
or explosion.
TEMPERATURE
Supply Voltage: 12 Vdc
SWITCHES
Electronic humidity alarm with modern SMD- Relay: (SPST) with COM., N.O. and N.C.
chip construction parts and dynamical micro- Relay Contact Rating: max. 2A / 250V
loudspeaker. Whenever both sensors of the Dimensions: 31 x 57mm, 25mm height
FROST INDICATOR
device get in touch with water, an audible
sound will be heard. Ideal as warning device
for wet baby’s napkins, overflown washingLIQUID LEVEL CONTROLLER
machines, for miniature boats, etc.
Operating voltage: 9 Volt
WATER DETECTOR
The detector will make alarm in case of contact with water. This device will indicate main
water pipe bursts, overflown washingmachines, full baths, etc. The sensor may be
connected through a longer cable.
Operating Voltage: 6 to 9 VDC
WATER ALARM
This temperature sensing kit is used as a
low temperature warning device. It has an
This kit is used to monitor and control liquid indicator LED that only lights up close to
level. Perhaps forgotten to turn off the tap,
freezing point (0 to 3°C), by flashing, but
leaking washing machines, water level drop- below this temperature (-3°C) it will remain
ping in your aquarium, rain tank or water
on continuously. A reliable thermistor, with
tank suddenly dry or over flowing. This kit
mounting stud, is supplied to sense the temcan keep the liquid level within 2 limits, low
perature. It can be mounted on the outside
and high mark, by controlling a pump or
of a vehicle to sense the road temperature.
valve. An output relay switch with common,
Calibration of trigger temperature is possible.
normally-open and -closed connections is
Specifications:
supplied. The relay can be used to operate a Supply Voltage: 10 - 15Vdc
bell or other alarm device.
A PCB is supplied with 2 level sensors:
Temperature Sensor: stud-mount thermistor
Sensor1 for detecting the high level mark
NTC 6.8 kOhm / 25°C
Sensor2 for detecting the low level mark
It has 4 indicator LEDs:
High-level indicator LED1
Middle-level indicator LED2
Low-level indicator LED3
Relay on indicator LED4
An alternating sensing voltage with a 1kHz
frequency is used to avoid electrolysis or
deposits on the sensors.
Please note: Never use the sensors in an
inflammable enviroment that will cause fire
or explosion. Do not use the supplied sensors in corrosive chemicals, like acids, since
02.66
which the relay switches off.
TEMPERATURE SENSOR
These 2 temperature settings can be indeWITH LED DISPLAY
pendently set by the user.
Specifications:
Temperature Range: -40 to 85°C
2 trigger settings are within this range
Temperature Hysteresis:
This kit can be used to keep the measured
temperature within a fixed range. The smallThe kit switches a relay on or off according
est temperature range is 1°C.
to a preset temperature. It is ideal to use as Output Relay: SPDT with COM., N.O., N.C.
a thermostat, ice alarm, fire detector, etc.
contact rating: 5A max.
The temperature range is approximately Dimensions: 65 x 80mm, 25mm height
30deg C to 120°C.
This temperature sensor kit has the same
features as the Temperature Sensor kit
Relay: max. 3A
MANUFACTURED BY: ELECTRONICS123 (GC098). In addition, it has a LED display,
PCB size: 45x22mm
that shows the following three items:
TEMPERATURE SENSOR
1) The current temperature reading
2) Minimum temperature setting
3) Maximum temperature setting.
THERMOSTAT
It can be used together with kits:
Temperature Controller (GC099) and
Microprocessor Controller / Timer (GC097)
A splendid aluminium housing with front
sticker is supplied with this kit.
Specifications:
This temperature sensor kit has been devel- min. and max. thermometer
oped especially to be used together with kits: Sensor Temperature Range: -50°C to 150°C
It can be set to degrees Fahrenheit
Temperature Controller (GC099) and
Microprocessor Controller / Timer (GC097) LED Display: 3 ½ digit, 7-segment
This sensor is used with these kits to build a Resolution: 0.1°C
temperature regulation and control system.
This kit is a general-purpose low-cost therKIT ORDER CODE: GC100
The
advantage
of
a
separate
sensor
lies
in
mostat using a NTC temperature sensor. It
the fact that the distance between the actual
has a relay as output and a LED-indicator.
controller and the sensor is of no imporSpecifications:
TEMPERATURE CONTROLLER
Temperature Range: +5°C to +30°C approx. tance.
Specifications:
(41°F to 86°F)
Relay Power Rating: 24VDC/AC 3A
Power Supply: 12VDC
Sensor Temperature Range: -40°C to 150°C
Sensor Linearity:
from -10°C to 50°C is better than 0.5%
full scale: better than 2%
Output Signal: (PWM) the pulse width is
modulated with temperature: 200µsec/°C
DIGITAL TEMPERATURE
CONTROLLER WITH LED DISPLAY Generated Pulse Width:
at -40°C: 2 msec. (adjust ± 500 µsec.)
at +150°C: 40 msec. (adjust ± 2500 µsec.)
Output Current: 15mA current loop
Distance: is tested up to 50m (distance
between sensor PCB and controller)
Hints:
For temperatures below 0°C and above
70°C it is advisable not to install the electronic circuitry (pcb with components) near
the actual sensor with 2 leads. If you experience difficulties with calibration, replace
RV3, 5K with a 20K type, or replace the
This kit is a digital temperature controller that SG3524 IC ( Texas ) with a CA3524 ( Harris
This is a dual output temperature controller
) type.
measures temperature with the DS18B20
kit that displays temperature and time.
temperature sensor from Dallas
Unlike a normal thermostat, this kit has two
MANUFACTURED
BY:
VELLEMAN
Semiconductor. This sensor is factory calioutput relay switches. The HI-relay is for
brated. The kit is controlled with a preproswitching on a cooling device when the
grammed PIC16F627A microcontroller. The
measured temperature is too high, like
source code is supplied. The measured temswitching on the air conditioning fan. The
perature is displayed on a 2 digit, 7-segLO-relay is for switching on a heating device
ment, red, LED display. This kit can also
when the temperature is too low, like switchcontrol temperature by switching an external
ing on the central heating system. Both relay
heating or cooling element using the onoutputs have a temperature trigger point and
board relay switch.
hysteresis that can be independently adjustTemperature Trigger Settings:
ed. One external temperature sensor kit is
The on-temperature is the lower limit above
also supplied with this kit.
which the relay switches on.
Specifications:
The off-temperature is the upper limit below
TEMPERATURE SWITCH
-30 TO 120 °C 12V
02.67
Supply Voltage: 9Vac (50Hz for clock timing)
One optocoupled input for connecting to the
supplied Temperature Sensor kit (GC098)
(one Temperature Sensor kit is supplied)
Optional: (if sensor should have own display)
One can replace the supplied Temperature
Sensor kit, (GC098), with the Temperature
Sensor with LED Display kit (GC100).
Two Relay Outputs: each SPDT with COM.
NO. and NC. contact connections
Display: 4 digit, 7-segment, red LEDs
Temperature Display Range: -40°C to 150°C
Resolution: ± 0.1°C
Relay Trigger Point Temperature Range:
from -50°C to +154°C
Time Display: 24-hour format clock
(requires 50Hz mains frequency for timing)
Dimensions:
Front Panel: 60 x 117mm
Building-in Depth: 80mm min.
This enclosure is specially made for the thermostat with LCD display kit (GC096).
Please note that this is only the empty enclosure and there are no electronics sold with it.
Dimensions:
Length: 130mm
Width: 70mm
Height: 70mm
SOUND SWITCHES
TELEPHONE TWO-CALL/ DEVICE
NOISE SWITCH
THERMOSTAT WITH REMOTE
CONTROL VIA TELEPHONE
This acoustic switch works with a microphone and a relay. Whenever there is any
kind of noise, (e.g. ringing of a telephone,
doorbell etc.), the microphone senses it and
switches on the output relay switch. It stays
on until the noise stops. With the aid of this
device you may activate a sounder or light in
another room. Ideal for persons with hearing
problems. It can be used in rooms with high
ambient noise levels, as an acoustic alarm
THERMOSTAT WITH LCD DISPLAY
system etc. The microphone pick-up sensitivity is adjustable.
Operating voltage: 9 VDC
This thermostat kit is used as any other temperature controller, but with the added feaMINI-VOX AND RELAY 12VDC
ture that one can select either the day or
night temperature. Selection between day or
night setting is done by means of a pushbutton on the device front panel or a telephone. The remote control facility is operated via the telephone keypad, thus a DTMF
type phone is required (does not accept
This is a temperature controller kit with 3 ½
pulse dialling). It can indicate if the day or
digit LCD display. It attempts to steer the
night temperature setting is being used by
measured temperature towards an
means of audio signals sent down the teleadjustable set temperature. When you press phone line. It can be switched between the
the pushbutton, switch1, the set temperature day or night temperature setting by using a
is displayed else the measured temperature security code, set by the user, which is
is displayed. The display can be calibrated in keyed into the telephone in a simple manner. The idea behind a VOX kit is that instead of
degrees Celsius or in degrees Fahrenheit. It It can be set to control the ambient tempera- the user pressing a pushbutton switch, the
has an on-board output relay to do the
ture in a room by switching a heating device sound of the users voice activates a relay
switch. This kit enables hands-free control
switching of the heating or cooling device.
(not included). The preferred end-temperaover devices like tape recorders.
The amount of temperature hysteresis is
ture can be set to either the day or night
Power Supply: 12Vdc.
adjustable. There is also a connection for an temperature setting. The specific temperaKIT ORDER CODE: EB637
economy switch that lowers the set temperature settings can only be set manually with
ture, for example the room temperature dur- the two turning knobs on the front panel of
ing your absence, to save energy.
the thermostat. The enclosure is supplied.
VOX FOR AUTOMATIC RECORDING
Specifications:
Specifications:
6VDC
Supply: 230Vac (transformer is supplied)
Temperature Range: -50°C to +150°C
Output Relay: SPDT with COM., N.O., N.C.
Adjustable Hysteresis: 0.2 to 10°C
contact rating: 240Vac / 5A (1200W) max.
Display Resolution: 0.1°C
Local manual control
Output Relay: SPDT with COM., N.O., N.C.
Separate Temperature Settings:
This is a very sensitive, sound or voice acticontact rating: 240V / 3A max.
1 for day time temperatures:
vated switch which plugs into the remote
adjustable between 14°C and 26°C and
plug of a tape recorder. It is ideal for hands
1 for night time temperatures:
free operation of a tape recorder. It has a
Enclosure for this thermostat kit: AC982
adjustable between 6°C and 18°C
microphone, a delay circuit and adjustable
Temperature Hysteresis (allowed temperaKIT ORDER CODE: GC096
sensitivity. It will turn on the tape recorder
ture
swing):
±
0.1°C
when the microphone detects sound that is
Three LED indicators for:
louder than the preselected trigger sound
HOUSING FOR THERMOSTAT WITH
Day time temperature is selected
level. The recorder will remain on while the
LCD DISPLAY GC096
Night time temperature is selected
sound continues. The circuit will turn off the
Telephone call was received and
tape recorder approximately 6 seconds after
thermostat has picked-up the line
the sound level has remained below the trigRelay output switch is active (on)
ger level. A battery holder for 4 AA size 1.5V
Telephone pick-up after ± 3 or 8 rings
cells is supplied.
Report when the temperature is below 3°C
Power supply: 6VDC
Automatic hang-up if no security code is
received within 40 seconds
Possible security codes: from 000 to 999
02.68
CLAP SWITCH 12V
a LED.
As soon as the Light beam will be interrupted, the LED will switch off.
Operating voltage : 6-12VDC
LIGHT SENSITIVE SWITCH
LIGHT ALARM 9 VDC
This is a sound sensitive switch that toggles
a relay on and off whenever there is a noise
like the clapping of hands. The relay switch
will change from off to on or from on to off
with every clap. It does not have a built-in
timer. The sound sensitivity is adjustable.
Usage: For switching on and off lamps or
other devices like alarm system by simply
clapping your hands.
Specifications:
Relay Contact Rating: 3A max.
CLAP ON/OFF SWITCH
This kit detects the slightest light. Protect
your cash drawer, medicine cabinet or cookie jar with this light alarm. The kit uses the
MAL12 darlington phototransistors and a
4011 CMOS IC containing 4 logic NAND
gates. This kit is a good introduction to several electronic building blocks, especially
NAND gate operation and how to get a piezo
to sound loudly by using an inductor.
PCB Size: 23 x 50mm
LIGHT CONTROLLED RELAY
SWITCH 12VDC
This device has a sensor that is sensitive to
ordinary light and controls a relay. It can be
used in alarm systems and for twilight
switches. The relay can be set to switch on
when the light intensity is above or below a
specific level. This reference light level is
adjustable. It requires a 12VDC power supply. The relay can switch current loads up to
6 Amps 12VDC.
Features:
You can operate your lighting with a simple
handclap. It is ideal for disabled or elderly
people. It has good immunity against surrounding noises. It is microprocessor controlled. Output relay operation can be selected to be either ‘pulse’ or ‘toggle and latch’.
LIGHT / DARK ACTIVATED RELAY
Select one of two activation modes:
SWITCH 12-15 VDC
‘1-clap’ or ‘2-clap’-mode selection
‘2-clap’-mode features built-in safety turn-off
timer (5h approx.)
The output relay has a LED-indicator.
Specifications:
Relay Power Rating: 24VDC/AC 3A
Power Supply: 12VDC / 150mA
DC adapter socket is included
A simple and inexpensive circuit, suitable for
many applications like the automatic switching of the lights in a shop window or a room
according to the ambient light level. The cirLIGHT SENSITIVE
cuit uses a light dependent resistor (LDR). A
SWITCHES
light/dark option has been incorporated. The
term ’light/dark’ is used because the circuit
has a PCB-mounted switch on board. In one
LIGHT BARRIER
switch position a light-to-dark transition will
activate the relay. In the other position a
dark-to-light transition is required. So you
can use the falling light on the detector to
switch on a normally off circuit or switch off a
normally on circuit.
Relay: 240VAC/5A
PCB: 60x32mm
Whenever there is incidence of light onto the
phototransistor, the light barrier will switch on
02.69
This kit automatically Switches on at dusk
and turns off at dawn.
Features:
wide-range adjustable sensitivity
delay circuit avoids on/off-cycling
Specifications:
Power Supply: 12Vdc
Relay Output (SPDT): max.5A/24Vdc
Adapter-Connector is included
THREE LDR LIGHT / DARK
ACTIVATED RELAY SWITCHES
Three different light sensitive kits each with a
LDR (Light Dependent Resistor) and output
relay switch. Each circuit has its own features and disadvantages that are examined.
The kits feature:
Kit (A) can be set to switch the relay output
either on or off when the light level increases
above a preset value. Relay chatter occurs
during on/off switching.
Kit (B) is an improved version of (A) with
much less relay chatter. It makes use of a
LM741 op-amp used in a Schmidt Trigger
configuration.
Kit (C) is similar to (B). Two transistors are
used for the Schmidt Trigger.
Specifications:
Output Relay: SPDT with N.O., N.C. and
COM. contacts with 230V/10A max. rating
PCB Dimensions (3 PCBs): 37x60mm max.
LIGHT BARRIER-HEAT SWITCH 12V
With this ’combination construction set’ you
may optionally construct a light barrier, a
heat switch (-40ºC...+100ºC), ice alarm or a
twilight switch.
Operating voltage: 12 V
The relay has a max. load of 6 A
TWILIGHT SWITCH 230VAC
around the LM/NE555, from National
Semiconductor, used as a monostable multi
vibrator circuit. It switches on a relay once
activated that stays on for 1 or 5 seconds.
The relay has a 10A contact rating.
DC CONTROLLED DIMMER 220VAC
TOUCH / CONTACT SWITCH
12VDC / 220VAC
The switch is capable of switches loads up
to 3A 230VAC (e.g. energy saving lamps)
automatically at dusk via an installed relay
and switches off again at dawn. The kit can
also work the other way round: Switching off
at dusk and connection at dawn
Dimensions: 40x51mm, 30mm height.
TOUCH SWITCHES
SENSOR SWITCH 9V
Whenever the two screw heads will be
touched with the fingers, this device will light
up a light emitting diode. If a relay card, kit
FB631, is connected with the sensor switch,
it is feasible to switch through the relay contact loads up to 3A.
Operating voltage 9VDC
This kit is a small but handy circuit that is
ideal for replacing an existing dimmer or
switch, in order to be able to control a lamp,
set of lamps or even a motor via an
This kit combines a touch switch and a touch adjustable DC voltage. One obvious application is control via low voltage interface
plate all together in the same kit. In the
boards, thanks to its optically isolated input.
touch switch two leads must be shorted
together by your finger touching them. In the It has a pre-set adjustment for full brightness
touch plate on one plate need to be touched. and “soft start” feature to lengthen lamp life.
It is suitable for incandescent lamps, mains
A battery can power the touch switch but a
voltage halogen lighting and low voltage
mains power supply must be used for the
halogen lighting in combination with a contouch plate to work. A 12V relay rated at
ventional transformer.
switching 240V/3A is supplied.
Specifications:
Supply voltage: 12VDC / 220VAC
Supply Voltage: 110Vac or 230-240Vac,
PCB size touch switch: 50x47mm
50 or 60Hz
PCB size touch plate: 50x47mm
Suppression of radio and TV interference
according to EN55015
Power Output: 750W / 230Vac max.
Load Current: 3.5A max.
LIGHT DIMMERS
max. phase shift with inductive load: 30°
Stepless Control Range: 0 - 98%
Control Voltage Range: 0 - 12Vdc max.
TOUCH LIGHT DIMMER
Input Current: 2.25mA max. for 12V input
WITH MEMORY 220VAC
LEDs for status indication
PUSHBUTTON CONTROLLED
DIMMER 220VAC
SENSOR TOUCH SWITCH
By soft touching of the sensors with the fingers, nose, etc. it is possible to connect and
switch off devices (by a relay). Ideal as
secret switch (screw heads), as original bell,
for use in hidden switches, etc.
This is a very modern dimmer that only
needs a light touch to operate. A light tap on
its sensor will turn the light on or off. A longer
touch will either increase or decrease the
light level. The circuit incorporates a memory
and will switch the light on at exactly the
same level it was before switching off. Very
stable operation.
Working voltage: 220 VAC
Maximum power: 400W
Maximum current: 3.5 A
RELAY TOUCH SWITCH
This touch switch kit is activated by just
touching a wire or touch plate. It is built
02.70
This is a mains light dimmer kit. A single
pushbutton switch is used to control the
brightness of a light. A brief push of the
switch toggles the light either on or off, while
continual pushing initiates the dimming
action. It has a soft-start function. It is suitable for low voltage halogen lighting. The
dimmer saves the preferred light level in
volatile memory. The dimmer will lose its
memory if the mains supply voltage is disconnected from it. Note that it requires a
mains rated push-button switch (GB723).
Specifications:
Operating Voltages: 220 - 240Vac
Power Output: 750W / 3.5A max.
Noise is suppressed according to EN55015
Dimming speed: 3.5s between fully off / on
TRANSFORMER CONTROLLER
MODULE 230VAC
Weight: 207g
SUPPRESSED 3.5A DIMMER 230VAC
This device may be used to control the
power input to a tranformer. It is connected
at the 230Vac primary side of a transformer.
The brightness (power output) of low-voltage
halogen lamps can be controlled indirectly by
controlling the power input to the step-down
transformer that powers the lamp(s).
Specifications:
Operating Voltage: 230Vac
Power Output: max. 400W at the input side
(primary) of a transformer
Duty Cycle Range: 5 - 95 %
Required potentiometer: 500k Ohm linear:
(HB170)
MULTIFUNCTIONAL DIMMER
This is a compact dimmer kit that will easily
replace an existing on / off light switch. This
kit enables one to vary the brightness of a
single light or a group of lights that are connected in parallel. It may also be used to
adjust the speed of a vacuum cleaner or any
230Vac motor with carbon brushes. A mains
noise suppressor is used to filter out RF
interference.
Specifications:
Output Power: 750W max. at 240Vac
Noise suppression according to EN55015
Protected against induction voltage peaks
Fuse Protection: 20 x 5mm 4A fuse in holder
MAINS LIGHT DIMMER 220/240VAC
This multifunctional dimmer kit is designed
for controlling 230Vac lighting. It makes use
of microprocessor technology.
It has an advanced protection system with
LED fault indication. This protection system
automatically switches off the dimmer unit
when the load is too inductive or no load is
detected.
The dimmer can be operated from various
remote places by the parallel connection of
mains rated push-button switches (GB723).
The “soft start”-function prolongs the life of
your light bulbs.
It has 13 operating modes like on/off toggle,
regular dimmer, staircase light control, slow
on/off dimmer, interval timer, speed adjustment for fans, etc...
It is suitable for both resistive and inductive
loads: incandecent lightbulbs, high-voltage
halogen lighting and low-voltage halogen
lighting with wirewound transformer. On
board fuse and mode selection push-button.
Specifications:
Two delay timers that can be programmed
through the learning mode:
each between 5 seconds and 2 hours
No Memory Loss in case of power failure
Automatic Frequency Detection: 50 or 60Hz
Power Supply: 110 to 240Vac
Load Current: 2.5A max. fused
Power Output: 600W / 300VA max. 240Vac
MOTOR SPEED
CONTROLLERS
(AC MOTORS)
LAMP DIMMER,
MOTOR CONTROLLER
MODULE 600W / 230VAC
This device may be used to adjust and regulate the power used by incandescent lamps,
heaters, hand drills, etc.
A potentiometer is used to adjust the power
consumption of loads with operating voltages: 110 - 230Vac. An interface module
(GB801) may be used for making adjustments, using control voltages or digital signals, instead of a potentiometer.
Specifications:
Operating Voltage Range: 110 - 230Vac /
50 - 60 Hz
Max. admissible short time current: 6A and
(3A continuous duty)
Power Output at 230Vac: max.1200W and
600W continuous duty
Power Output at 110Vac: max 600W and
300W continuous duty
Duty Cycle: 100% at 3A or
20% at 6A (max. 3 min.)
Control: via a firmly connected rotary
potentiometer with knob (is included)
Loads: for ohmic or inductive loads
DC OR PULSE CONTROLLED
INTERFACE MODULE 230VAC
This is a standard triac light dimmer circuit
that can be used to adjust the brightness of
mains lights. It can also be used to control
the speed of AC motors. It has built in RF
anti-noise suppression in the circuit. It works
better than some commercial units on the
market especially at low light levels. It does
not flicker at low light levels. Power supply:
220VAC
Maximum Load: 600W
Must be built into a box for regular operation.
This device is specifically made to interface
with power controller modules (GB750) and
(GB796). This device enables one to adjust
the above mentioned modules without using
potentiometers, but directly replacing them.
The module can receive either a DC voltage
or TTL periodic pulse train input signal from
a microcontroller or computer. The inputs are
optically isolated from the internal circuitry.
02.71
The input signal is linearly interpreted to
drive the device output. The output is connected in the potentiometers place (refer to
included connection diagrams).
Specifications:
Operating Voltage: 110 or 230Vac is led to
the device via the connections
Output Signal: a control voltage for the
potentiometer input of (GB750) / (GB796)
Input Signals: (only 1 input used at a time)
DC Voltage Inputs: 1-5V / 1.4k Ohm,
3-12V/4.1k Ohm, or 6-24V / 9.1k Ohm
Pulse Train Input: pulses 0-5V / 1.1k Ohm
with Frequency Range: 1 - 10kHz and
Duty Cycle Range: 10% - 90% (full on)
Adjustment is done by changing the
pulse width.
DRILL SPEED CONTROLLER
220VAC
This is a circuit that may be used to adjust
the speed of rotation of drills and small electric motors in general. It is ideal for use when
the drill is used to drive a screw into place or
to wind a coil.
Power supply: 220VAC
Maximum Load: 600W
PCB size: 65x48mm
POWER CONTROLLER MODULE
230VAC / 2600W MAX.
MOTOR SPEED
CONTROLLERS
(DC MOTORS)
DC TO PULSE WIDTH MODULATOR
8 -35VDC
This mains voltage power controller is ideal
for driving ohmic and inductive loads, like
motors, heating sets, glow lamps etc.
Note that this device is not suitable for driving motors that require a starting capacitor or
fluorescent lamps. An expansion module
(GB801) may be used for making adjustments, using control voltages or digital signals, instead of a potentiometer.
Specifications:
Operating voltage: 230Vac
Power Output Rating: max. 2600VA
Required Potentiometer: 500k Ohm linear:
(HB170)
In case a fine control is required also use
additional potentiometer: 100k Ohm linear:
(HB169)
POWER CONTROL DIMMER
2600W, 230VAC
This control circuit is ideal for the accurate
control of DC motors, lighting levels, small
heaters as well as other applications. The
circuit converts a DC voltage into a series of
pulses, such that the pulse duration is directly proportional to the value of the DC voltage. The great advantage of such a circuit is
that almost no power is lost in the control circuit. Protected against overload and short
circuit.
Supply voltage: 8 - 35V DC
Maximum output current: 6.5A
Input voltage: 2.5 and 35V DC
PCB size: 85x48x45mm
DC MOTOR SPEED CONTROLLER
5 - 15 VDC
SPEED CONTROLLER
This kit will control the speed of any common DC motor rated up to 100V (5A). The
circuit operates on 5V to 15Vdc. It uses a
This unit controls steplessly glow lamps,
NE556 to pulse-width modulate a high curheating devices, (e.g. soldering irons,
rent switching power MOSFET, IRFZ44N or
heaters etc.) as well as motors (universal
IRF530N. In this way motor torque is mainmotors like drilling machines, keyhole saws, tained regardless of the adjusted speed.
etc.). Max. operating power: 2600 Watt. Max. Supply Voltage: 5-15 VDC
This is an AC motor speed controller kit. It is temporary operating power: 3600 Watt.
There is also necessary a cooling element
Enclosure Dimensions: 60 x 100 x 30mm
designed to control only single phase AC
with minimum dimensions: 10x10x3cm
motors that must have carbon brushes, like
electric saws, drilling machines, vacuum
cleaners, etc… This kit maintains acceptable
BIDIRECIONAL DC MOTOR
motor torque, even at low rotational speeds
SPEED CONTROLLER
(r.p.m.). It may also be used to control low
6 - 32 VDC
voltage, 24Vac, motors. The output load circuit, that includes the motor, is electrically
isolated from the mains power supply.
Specifications:
Output Load Voltage: 24 - 240Vac
Adjustable Speed: 5 - 95% of full speed
Suppression of radio and TV interference
This kit enables one to control the rotation
speed and direction of a DC motor with a
single potentiometer. The motor is off in the
center position of the potentiometer. The
motor will turn in opposite directions, when
the potentiometer is turned, to the left and
02.72
then to the right of center position. The further the potentiometer is turned, away from
the center position, the faster the motor will
turn. The motor’s speed is controlled by
using the PWM, (pulse width modulation),
current switching technique. Two IRFZ44N
and two IRF4905 power MOSFETs are used
for current switching. The circuit and motor
have to use the same supply voltage.
Specifications:
Motor and Circuit Supply Voltage: 6 - 32Vdc
Maximum DC Motor Current: 5A
ment) to obtain the required
license and obey the regional
regulations on radio communications and radio equipment.
FM TEST TRANSMITTER
FM OSCILLATOR
Mini FM radio transmitter with a built-in
microphone. The transmitter frequency can
be adjusted
Specifications:
Frequency Range: 88 - 108 MHz
DC MOTOR SPEED REGULATOR /
LIGHT DIMMER 12 - 24VDC / 10A
Attention: Use of this device has to be in
Mini FM modulator (100 - 108MHz).
accordance with your country regulations.
Integrated pre-amplifier, to which any type of
microphone may be connected. Family
broadcasts, babyphone, security. May be
TELEPHONE FM TRANSMITTER
received by any portable FM radio or tuner.
Specifications:
power supply : 9 - 12VDC
input sensitivity preamplifier : 5mV
This kit is attached to your telephone line
with the supplied alligator clips. When there
is a signal on the line, (when you pick up the
handset), the circuit will transmit the conversation a short distance in the 86 - 95 MHz
Electronic DC output regulator for incandesVHF-OSCILLATOR 2W
FM band. The transmission frequency may
cent lamps and motors up to max. 120W
be adjusted with the trimcap. No antenna is
(10A). The power can be extended up to
required. The phone line itself acts as an
max. 360W (30A). When using operating
antenna. There is no battery required.
voltages of 14 to 24V, it is necessary to buy
3 resistors (100 Ohm, 7W) in addition.
SPEED CONTROL FOR
Suitable for microphone or tape connector. In
9V FM TRANSMITTER BUG
MINI-DRILLING MACHINES
the EC the device may only be used by
licensed radio amateurs. The use as bugging
device (mini-spy) or private radio transmitter
is prohibited and a punishable offence in
many countries (e.g. Europe). Exceptions
exist in the USA or international waters. The
required coil is not enclosed. It is to be
This FM transmitter `bug` kit has improved
wound by using own material (bare wire).
frequency stability and range. The oscillator
Adjustable: approx. 80 to 120 MHz
coil (inductor) is etched onto the PCB and
Operating voltage: 9 to 26V max. 2W input.
the tracks are thicker. Frequency is tuned
within 89 - 109 MHz FM band using a trimThis device is suitable for operation of minia- accordance with your country regulations.
capacitor. Range of 100m in the open. You
ture drilling machines with DC-motors at a
can experiment with the antenna length for
transformer. The rectifier is already fitted,
optimum distance. The circuit is explained.
you need only a transformer with AC-voltage,
voltage according to the drilling machine. For TELEPHONE "BUG" TRANSMITTER Attention: Use of this device has to be in
motors up to 3A current input.
Operating Voltage: 12 to 24V
MINIATURE BUG
It is suitable for listening to telephone conversations within a small distance around the
RADIO, TV, VIDEO
transmitter. It is connected in series with the
TRANSMITTERS
telephone and as soon as the receiver is
picked up it starts transmitting. It is powered
Note: This section contains radio from the telephone line.
transmitters: FM- , VHF-oscillaaccordance with your country regulations.
tors, telephone bugs and FMThis FM transmitter is a minuature version of
Kit AA218 using normal passive compoMANUFACTURED BY: SMART KIT
transmitters. It is very important
nents. Components have been squashed
to know that transmitted radio
together as much as possible while still
signals may interfere with other
allowing good access to the tuning capacitor.
radio signals and radio equipAttention: Use of this device has to be in
ment. It is the full responsibility
of the client (user of radio equipMANUFACTURED BY: DIY
02.73
FM TRANSMITTER TWO STAGE
9VDC
Our most powerful FM transmitter to date.
Easy to build and tune in the upper part of
the FM band. Reaches between 100m to 1
Km in the open. Uses RF transistor for its
final stage. An on/off switch is mounted on
the PCB. Full circuit schematic provided.
Working frequency range: 63 - 130 MHz.
Power supply: 9V DC.
PCB size: 70x17mm.
FM TRANSMITTER 1 WATT
VCO FM 88 - 108 MHZ
3W TRANSMITTER
The ideal way to extend the range and the
capabilities of your transmitter without
spending a lot of money. This kit makes a
linear VCO, (Voltage Controlled Oscillator),
VHF amplifier for the frequency band 88 to
108 MHz and is used for frequency modulation, (FM), transmitters. This circuit is
designed with high frequency transistors like
the BFS22A and has output RF power of 3
Watt in the antenna. If you use this kit along
with (AB203), you have a complete FM PLL
transmitter. Easy tuning.
Very Important: A licence has to be obtained
to transmit with this kit. Be 100% sure that
your transmission does not interfere with
other radio station frequency bands.
Specifications:
adjust. The heatsink is included in the kit.
The circuit also has a relay that will switch
the aerial from the transmitter to the receiver
automatically.
Supply voltage: 13.5 VDC
Supply current: 2.5A max.
AUDIO/VIDEO TV MODULATOR
12 - 15VDC
If it is desired to connect a video signal originating from a camera or other video source
to a normal TV set, you will need this modulator. This kit has two RCA inputs. The one
input is for an audio signal and the other is
for a video signal. The two input signals are
converted into one UHF TV signal, at the
PAL socket, that can be connected to a TV
antenna input. In certain countries it is permitted to use this modulator as a mini transThis is a simple but very powerful FM transmitter by connecting a small antenna to its
mitter kit that will give you a very pleasant
FM STEREO ENCODER
output. With this facility it is possible to
surprise with its capabilities. It is built around
receive the signal from the video recorder or
two transistors. The first transistor stage is
camera elsewhere within your home (max.
an AF (audio frequency) preamplifier and the
range of 30m). Please note that this kit’s
second transistor stage is the RF (radio fremain purpose is to convert an audio and
quency) output oscillator. The kit includes a
video signal to an UHF signal, it is NOT
piezoelectric microphone. An open dipole
intended to be used for wireless transmisaerial can be used. This transmitter can
sion. A metal enclosure is supplied with this
deliver up to 2 Watts RF power if it is used
kit.
with a power supply voltage that is in the
Specifications:
range of 24 - 30 Vdc.
Supply Voltage: 12 - 15V DC
Two RCA Socket Inputs: audio and video
Antenna / TV PAL Socket Output:
This stereo encoder kit can improve the
UHF channel 21 (450-500MHz adjustable)
standard of your FM broadcasting. You can
Dimensions: 70x104x30mm
easily connect it to any existing FM transmitMANUFACTURED BY: SMART KIT
ter or modulator, (100-108MHz), without
PLL SYNTHESIZER FM 88-108 MHZ spending a lot of money or making compliKIT ORDER CODE: EB356
cated conversions. Try it and start broadcastMANUFACTURED BY: VELLEMAN
ing in professional STEREO today!
Specifications:
Supply Voltage: 24VAC / 110mA
RADIO, TV, VIDEO
PCB Dimensions (2 PCBs):
RECEIVERS
88 x 185mm and 36 x 165mm
FIELD-INTENSITY INDICATOR
Upgrade your FM transmitter, with a FM PLL
LINEAR CB 30 WATT
(Phase Locked Loop) synthesizer, that
ensures accurate tuning without the slightest
declination.This is accomplished by using a
combination of dip switches to select a certain frequency. The stability of the circuit is
excellent, due to Motorola's MC145151 and
a crystal. Bandwidth 88 to 108 MHz with
50KHz steps. If you use this kit along with
(AB204), you have a complete PLL transmitWith this indicator it is made possible to test
ter.
if the transmitter of your remote control
Specifications:
device, CB-radiotelephone device, radioteleSupply Voltage: 24 - 30 Vdc
phone, garage-door boy, etc. does really
A
linear
amplifier
that
will
make
possible
long
distance communications, with your existing transmit. It is possible to test within the
CB equipment in the 27 MHz Citizen Band. It range of 10MHz up to 100MHz. Indication is
is connected at the transmitter output before realised through LED. The measuring device
has simply to be connected with the antenna
the antenna and is very simple to built and
of your transmitter, there is no need of an
02.74
interference in your transmitter!
FM RADIO
CONVERTER 100 TO 200 MHZ
AM/FM ANTENNA AMPLIFIER
This amplifier provides 22dB gain wherever
you need it. DC power supply directly or via
the coax cable. Metal housing included.
Specifications:
gain : 22dB
power supply : 12V to 15V / 3mA
input- and output impedance : 50 - 75ohm
frequency range : 10MHz to 150MHz
dimensions : 86 x 36 x 24mm
Features:
Double fun: building and listening!
The converter makes it feasible to receive,
easy to assemble: no coils to wind
for example, taxi radio, amateur radio,
one single adjustment
marine radio broadcasting, television sound, pre-assembled and tested FM front end
etc. through an ordinary VHF-radio. The con- receives the complete FM band: 88-108
verter has simply to be placed within the
MHz
antenna lead! It is necessary to observe the with ON/OFF switch, volume control and
Postal Regulations! Operation is solely
LED indicator
allowed to amateurs holding the respective
Specifications:
licence!
Power Supply: 12VDC / 100mA (adapter
jack provided)
AM RADIO WITH AMPLIFIER STAGE
(SPEAKER INCLUDED) 9 VDC
FM-VHF RADIO RECEIVER
(SPEAKER REQUIRED) 9 VDC
ANTENNA AMPLIFIER 30 - 850 MHZ
9-12V
This wide band antenna amplifier covers the
frequency range of 30 to 850MHz. It is ideal
for weak VHF and UHF television signals
and also for the amateur radio bands. No
need for balancing.
Power supply: 9 - 12VDC
Output impedance: 60 Ohm
Max. amplification: 20dB
PCB Size 55x55mm
KIT ORDER CODE: MB095
This small high quality FM receiver is built
around the TDA7000 IC. The kit has excellent reception properties and selectivity.
Power supply: 9VDC
Range: 88 - 108MHz
A complete AM radio on a single PCB. The
LF-output power: approx. 1Watt
radio frequency is front end tuned. A single
Suitable speaker is Code: (GB820).
chip is used for the RF amplifier and detecPCB size: 60x70mm
tor and two stages of amplification of the
KIT ORDER CODE: MB090
audio signal into a speaker. The tuning coil is
pre-wound. All components included.
Power supply: 9VDC
FM RADIO RECEIVER WITH 5 WATT
AUDIO AMPLIFIER 9-12 VDC
IC-RADIO HF-MF-LF
ANTENNA AMPLIFIER
50 TO 1000MHZ
An easy to mount radio with loudspeaker. It
Single-stage antenna amplifier, with continu- is possible to receive high, medium or long
frequency. Excellent sound! Operating mode:
ously adjustable amplification up to maximum of 15 dB. For any television range from single-circuit. For 9V. Output: max. 1 Watt.
channel 2 up to channel 65, especially suitMANUFACTURED BY: KEMO
able for VHF radio and cable television.
Input and output impedance: 50 to 75 Ohm.
There are prepared clamps for coaxial cable
on the board. As required it is possible to
connect two antenna amplifiers one after
another. The total amplification will correspondingly increase.
02.75
A small FM receiver that will surprise you
with its sensitivity and quality. It uses the
TDA7000 which is a complete FM receiver in
a single IC package. It features varicap tuning for higher stability and also incorporates
a powerful audio amplifier with a 5 Watt output. The kit includes the speaker.
Working voltage: 9-12 VDC
Sensitivity: 1.5 uV
Audio output power: 5 Watts
Distortion: 0.7%
VHF RECEIVER 9V
TV AND VIDEO
VIDEO SIGNAL CLEANER 9VDC
AUDIOSCOPE
Features:
This kit is used to clean a video signal and
removes unwanted distortion. It stabilises the
picture quality and fluctuations in brightness.
The audioscope produces vertical black bars
Also improves picture quality on LCD monion the TV-screen, which move according to
tors and projectors.
the rhythm of the music (similar to an oscillaThere are inputs and outputs for both PAL
tor).
(composite video) and NTSC (S-video) forOperating Voltage: 9 to 14 VDC
mats. Please note that these video signals
can not be mixed. A LED indicates when the
STEREO DECODER 4.5 TO 12VOLT
video signal is distorted. Warning: this kit
may only be used for making backup of perTV PATTERN GENERATOR 9 VDC
sonal copies of which you are the rightful
owner. Check copyright information on the
original DVD, VHS, VCD,...
Specifications:
Recommended Adapter:
MODULE
ORDER CODE: GC117
A pattern generator is a very useful instruThe decoder has simply to be connected at
the A.F. output (e.g. loudspeaker connection) ment for the correct alignment of the timing
of a VHF-radio. It is then possible to connect circuits of a television set. This circuit is a
VIDEO AND RGB
at the output of the decoder a stereo amplifi- bar generator that will produce horizontal
CONVERTER / PROCESSOR
and vertical stripes (bars) on the TV screen,
er. Disconnectible, automatic switch-over
that will help you align the vertical and horimono-stereo when receiving the stereo sigzontal scanning synchronization circuits of
nal. Stereo indication through LED.
the receiver.
Operating voltage: 4.5 to 12V
Working voltage: 9 VDC
Current drawn: 2 mA
Operating Frequency: 170 - 250 MHz (VHF)
VHF - FM - TV RECEIVER
Horizontal scan frequency: 16525 Hz
Vertical scan frequency: 50 Hz
Output impedance: 75 ohm
This kit is used to process PAL colour video
VIDEO SIGNAL AMPLIFIER 12V DC signals. To process a PAL colour video signal it first has to be converted back into the
original red, green and blue signals. This kit
can separately adjust these colour signals
along with the colour intensity, brightness
A receiver that lets you listen to all the freand contrast. After processing, the signal can
quencies between 50 and 160 MHz. It can
then be converted back into the composite
receive signals in AM and FM. The tuning is Video cassette recorders are becoming ever PAL video signal. There is a PAL composite
so
popular
and
as
it
was
to
be
expected
the
done by means of a VARICAP diode which
video output and also separate RGB (red,
market is flooding with accessories that
gives the receiver greater stability. The
green, blue) colour signal outputs. It is also
make
the
use
of
the
VCR
easier
and
receiver has a 5 Watt output, audio, power
possible to connect a SVHS input signal.
enhance
its
operation.
This
circuit
is
a
broad
amplifier incorporated on the same board.
The enclosure is supplied.
band amplifier which will take the video sigSpecifications:
Specifications:
nals
from
your
VCR
and
will
amplify
them
Supply voltage: 12 - 15Vdc
sufficiently to drive up to 3 monitors, TV sets
Supply Current: 0.5A max.
(provided
that
they
can
accept
direct
video
Frequency Bandwidth: 50 - 160 MHz
Colour System: PAL (CCIR)
signals),
or
other
VCR’s
for
recording
from
AF Output Power: 5 Watts
3 Controls for:
one video to up to three others.
saturation (colour intensity)
It
will
also
make
possible
to
record
from
one
brightness and
video to two others and at the same time
contrast
have a monitor connected to check what you
3 Separate Controls for:
are recording. The amplifier is also very useRed, Green and Blue colour signals
ful if the video recorder is far from the moniComposite Video Input (RCA-connector)
tor. PCB 120mm x 35mm.
Input Amplitude: 1Vpp
Working voltage: 12V DC
Input Impedance: 75 ohm
Current: 100 mA
Composite Video Output (RCA-connector)
RGB-output: 9-pin SUB-D connector
Output Amplitude: 1Vpp
High-quality VHF-receiver with special-IC.
There is hardly no tuning necessity (2 coils
to be winded). Extraordinary sensitive and
selective!
Output: approx. 40mV for a final amplifier or
earphone.
02.76
Output Impedance: 75 ohm
RF Modulator Module (RFMOD) (AB416)
(module is used to generate UHF TV signal)
Enclosure Dimensions: 200 x 67 x 170mm
SECURITY
ALARM SIMULATORS
AND DETERRENTS
LED EMERGENCY KIT 6 TO 15V
If the operating voltage for the LEDEmergency light (transfo, power supply, battery) breaks down, the LED still luminescences > 15 minutes! During this time an
Gold-Cap-Elca supplies the LED with current. Use: marking of emergency exits,
switches, locks etc.
Operating voltage: 6 to 15V (DC) or (AC)
high-voltage pulses that may be as large as
3000 Volt.
This kit is used to make a weaker type of
ELECTRONIC WATCHDOG
electric fence instrument that is only suitable
for smaller fences and small animals. It is
not suitable for larger pastures and bigger
animals that will require a stronger electric
fence instrument. A heatsink and transformer
is required for this kit to work and it is not
included with this kit.
Specifications:
Supply Current: 1.5Adc
A circuit that produces a natural sounding
Required (not included):
barking dog with a sensitive “ear” to everything that comes near it. It is a faithful watch- Heatsink: 50x62x17.5mm (AC824)
dog, which never sleeps and never has to be Nut, Bolt, Washer, Insulators
Transformer: 230Vac to 12Vac, 1A (AC658)
taken out for a walk.
Specifications:
Power Supply: 2 x 8Vac or 9 - 12Vdc /
500mA
Choice of Two different “Dog Sounds”
ELECTRONIC KEY AND
Reacts to surrounding Noise with Adjustable
Sensitivity
KEY-PAD SWITCHES
Speaker Output: 2W at 4Ohm
Hints: If bark frequency is to low (very slow
ELECTRONIC KEY ACCESS
bark) reduce the value of C3 to 1500pF. If
microphone is to sensitive, lower the value of
R20 and increase the value of R2. If there is
a metallic background noise, put a 33pF
capacitor between pin 7 of IC3 and ground.
CAR ALARM SIMULATOR
HIGH VOLTAGE,
LOW POWER
DETERRING DEVICES
PARALYSER 10000 VOLT
When holding the supplied key pendant in
front of the sensor (distance 5 to 15 mm), a
relay on the circuit board switches on.
Application: non-contact door opener to
A flashing LED with ‘realistic-appearing’
switch appliances etc. You may hide the sensequence simulates an active car alarm syssor behind a non-metallic nameplate or a
tem.
door glass pane. In this case only ’insiders’
Features:
know, at which point you have to hold the
It activates automatically when the engine is
key pendant in order to open the door.
turned off
The key pendant does not require any bateasy to install, just two wires to be connecttery! One key pendant is supplied.
ed
Optional: spare key pendant (GB791)
adjustable sensitivity
Operating voltage: 12VDC 0.1A
Specifications:
With the aid of this device it is feasible to
produce with a battery 4.5 to 6V high-voltage
Supply Current: 12mA max
pulses of more than 10.000 Volt, which strike
A pre-wired LED-holder and two warning
through clothing and provide an ideal selfELECTRONIC COMBINATION LOCK
labels are included
defence weapon. The attacker will have a
’shock’ due to the strong electric shock. In
12VDC
USA this kind of paralyser (built-in riot sticks)
are used by the police. Also effective against
wild animals. The deterrent effect is already
ALARM DISPLAY
achieved through the jumping sparks and the
spark discharge noises!
ELECTRONIC FENCE
An introduction to a basic but fully working
combination lock. Separate touch pad with 9
pads. Lock is reset if an incorrect digit is
pressed. Relay is capable of switching 240V.
Robust and versatile.
In this alarm display there have been fitted 2
different coloured light emitting diodes, which
flash alternatively in short sequences. For
use in cars, weekend-houses, etc. in order to
simulate an armed alarm set.
This kit, when used together with an additional 230V-to-12V transformer, produces
02.77
panel, with nine membrane keys, can be
used inside and outside the house.
Specifications:
Supply Voltage:
8 - 12Vac or
9 - 15Vdc
Supply Current:
with relay off: 300nA
with relay on: 40mA
4-Digit security code (one of 3000 codes)
Time Limit for entering the code: 5 seconds
Output Relay: SPDT max. 5A / 220V
By touching the correct numbers a relay will Relay Pulse Setting: connect jumper 1 if the
relay should only be on for a short time
operate. In case that false numbers are
touched, the lock will block automatically for Indicator LED: lit if the lock is open (relay on)
some time. The number can be preset freely. Front Panel Dimensions: 80 x 80mm
Usage: For opening doors and gateways
without keys, to switch machines and elecMANUFACTURED BY: VELLEMAN
tronic devices, which should not be operated
USER-DEFINABLE
by unauthorized persons (through latching
8-CHANNEL TOUCH PANEL
relay). For selfmade electric locks at safes
and partition for valuables etc.
SENSOR NUMBER LOCK
DIGITAL NUMBER LOCK
WITH KEYBOARD 6VDC
Ever wanted your own keyboard with your
personal layout and symbols? Here is the
solution: a soft-touch see-through panel with
8 keys. Now simply print YOUR keyboard
layout on a transparent foil and make your
own keyboard! Each of the 8 keys has a
LED indicator and open-collector output.
Each key is backlit and can be set to either
momentary or toggle operation. Use jumpers
to select 1 of 4 different keyboard functions:
1) 8 independent keys (toggle or momentary)
2) 8 rotary keys (pushing one key will clear
all previously pressed keys and only set the
key that is currently being pressed)
3) combination of (1) and (2): 4 independent
keys and 4 rotary keys
4) 1 key can be set to serve as a pre-set
After typing in any four-figure number, the
memory for the other 7 keys or it can be set
relay will pull up. The code number can be
as a “clear all” key
programmed freely and is easily changed.
Completing the features of this unique keyUsage: As doorlock without using a key, to
board is a “click” sound when the keys are
switch on devices (radio, TV sets, machines, operated. The enclosure is supplied. The 8
etc.) which should not be operated by
open-collector outputs can easily be constrangers. Even suitable for safe doors!
nected to your own application or to a relay
Relay contact: 1xIN max. 5A load
card like:
the 8-Channel Relay Card (AB308) or the
Universal Relay Card, 16 Relays (GC055)
Specifications:
DIGITAL CODE LOCK
8 Keys: set for toggle / momentary operation
4 different functions (jumper selectable)
8 open-collector output switches:
max. 100mA / 50V per output
Board-to-wire Connectors: 20cm wire
keyboard operating force: 40g
Dimensions (frame included):
Height: 90mm, Width: 165mm, Depth: 35mm
This is a 4-digit, digital, code lock kit. It may
be used to switch an alarm on and off or to
open a electro-mechanical door lock. A LED
on the operating panel indicates the state of
the lock. The four code digits are easily
defined using wire jumpers. It has a relay
output switch. The aluminium operating
02.78
ALARM
CONTROL PANELS
MINI ALARM SYSTEM
It is feasible to connect as much alarm contacts as desired. The contacts (not enclosed
in the kit) have to be fixed at doors, windows, drawers, etc. which are to be protected. Whenever the alarm is activated, there
will sound for approximatley 2 seconds a
cheeping, shortly swelling up and down tone.
The sound is relatively silent, but will attract
attention and could be increased through an
additional amplifier. A mini-loudspeaker Ø
30mm is enclosed. Ideal as alarm unit for
drawers, cupboards and for children’s
rooms.
UNIVERSAL ALARM
FOR CAR, BOAT, HOUSE
Professional alarm unit for 12 Volt.
Connecting features: max. 20 rest contacts.
Contact control and alarm indication via
LED’s.
Adjustable rise-delay time and alarm duration: approx. 2 to 15 seconds and 8 to 30
seconds, in accordance with the police law.
MOTORBIKE ALARM 6 VDC
A project that will protect your motorbike. It
uses a simple vibration sensitive contact that
will detect the slightest movement of the bike
(sensitivity is adjustable) and will trigger the
alarm. When the alarm is triggered the output relay closes and its up to you to connect
it to a siren or the motorbike’s horn. The circuit has a preset alarm time that resets automatically.
Power supply: 6VDC
CAR ALARM SYSTEM 6 - 12 VDC
CAR ALARM SYSTEM
RF REMOTE CONTROLLED
LIGHT BARRIERS
PIR MOTION DETECTOR
A circuit that will effectively protect your car
from theft. It can be triggered from the vibrations that will inevitably be caused by anyone attempting to break into the car. It will
also detect a door opening as long as it is
connected with the courtesy light by sensing
the voltage drop across the car battery when
the light is turned on. It has entry and exit
delays and the alarm duration is adjustable.
It resets automatically after an alarm.
Needs a Piezo siren code PB042 if not connected to your car’s horn.
Power supply: 6 to 12 VDC
This kit makes an outstanding car alarm system. Please note that this kit has to be soldered and assembled by an experienced
constructor. This alarm system is controlled
by a RF (radio frequency) remote control
unit. It can be connected to a variety of sensors. The RF remote control unit allows this
alarm to control a central door locking system (not included).
Features:
Microprocessor technology is used in design
Multi-functional remote control operation
Audio and visual on/off indicators
Multifunction dashboard mounted LED
CAR ALARM
Automatic reset after alarm
Adjustable voltage drop detection (reaction
to interior lighting)
Voltage drop detection active immediately,
or after 5 minutes
Direct alarm trigger input
Warning alarm trigger input (2 triggers within
15 seconds = alarm) from optional
ultrasonic detector (FB089)
Warning
input can be switched off with the
This car alarm kit can detect sudden voltage
drops of the battery when the interior, trunk, remote control
Adjustable shock detector is supplied (can
or hood lights are switched on. To ensure
correct operation, a number of control indica- be switched off with the remote control)
Detector input for ventilator fan in order to
tions have been included, such as: flashing
LED to indicate that the adjustable exit delay avoid false alarms from voltage drop sensor
has expired, after you have left the car, and 2 Switches pin contact type for bonnet and
boot is supplied
that the alarm is armed. Pre-alarm buzzer to
Internal siren for on/off signal and alarm
indicate that the alarm is activated, so that
Output for external siren and pager (5A)
you will not forget to switch it off when you
get into the car. The alarm is easy to switch Alarm Sounding Duration: 30 seconds
on and off, either automatically or by means Starter interrupter for ignition or diesel fuel
pump (15A)
of the ignition switch or a latching remote
special starter motor interrupter
control unit. The alarm has a relay output
(30A) relay is supplied
switch that can be used to switch an external
Output
to hazard lights (2 x 6A max.)
siren either continuously or intermittently.
Output for central locking (100mA) can be
Specifications:
used with door lock interface (FB095)
Selectable code for the supplied RF remote
transmitter and receiver (8.748 codes)
Output Relay Switch: SPDT with COM, N.O.
Automatically
resets and arming in the event
contacts with 10A rating
of accidental switch off (60 seconds)
Battery Voltage Drop Detection
Input for optional ignition cut-off via security
Entry Delay Time: 2 to 30 seconds with
code keypad (FB087)
buzzer indication
Diagnosis facility to identify a triggered
Exit Delay Time: 2 to 180 seconds with
sensor at a later time
LED indication
Specifications:
Sounding Duration: (siren is not included)
60 seconds with automatic reset
Temperature Range: -40 to +85°C
Hint: To make the voltage drop detection
Battery for remote control unit: 12V type
more sensitive replace R1 with a lower
(DB247) (not included)
resistance value between 100 and 470 Ohm
Hint: Use the following capacitor values on
the RF remote control receiver:
C6 is 1nF (DB191) and
C7 is 100nF (DB202)
02.79
This kit, a state of the art passive infra red
(PIR) motion detector, uses a purpose made
IC, PCB-mounted Fresnel lens and a dual
element PIR detector. The sensitivity, lightlevel response and output on-time is
adjustable. A transistor open collector type
output with a LED indicator.
Range: 3m
COMPONENTS FOR
PIR MOTION DETECTOR
This kit contains the 3 essential components
required to make the PIR movement detector (AB099):
1 dual element PIR sensor
1 Fresnel lens
1 purpose made PIR motion detector IC
Application Notes are included.
INFRARED SPOTLIGHT
With the infrared spotlight CCD- and video
cameras may recognize objects also in complete darkness. The infrared light is invisible
to humans, CCD-cameras can see well with
an infrared spotlight. Perfect for inconspicuous observation of entrances, drives etc.
Operating voltage: 12 to 14VDC 300mA
Range: 5m
MINI-INFRARED LIGHT BARRIER
10CM
Infrared-light barrier with transmitter and
receiver and a range of approximately 10
cm. Application: for the model railway, entry
holes for aviaries, beehives etc. With invisible infrared light ray. The light-emitting diode
extinguishes if the light barrier is interrupted.
As accessories the kit FB631 Relay card is
available in case other loads shall be
switched via a relay.
INFRARED LIGHT BARRIER 5M
Infrared light barrier with transmitter and
receiver and a maximum range of approximately 5 metres. If the invisible infrared ray
of light is interrupted (if for example a person
walks through the ray of light), this will be
indicated by a light-emitting diode. If other
appliances shall be switched with the light
barrier (e.g. a siren), a relay can be connected in addition: (6V, >120 Ohm, not contained
in the kit).
IR LIGHT BARRIER 1 - 4M
board relay switch that can be connected to
a buzzer or alarm system.
Specifications:
Supply Current:
Transmitter: 40mA
Receiver: 50mA
Range: 20m
Relay Switch: SPDT with COM, NO and NC
Dimensions:
Transmitter: 33 x 46mm, 15mm height
Receiver: 49 x 52mm, 20mm height
for approximately 60 to 100 seconds. Usage.
As timer for games (e.g. for chess) or for
easy photographic and developing works. It
is possible to make time adjustable, if a
potentiometer 1M linear is connected (not
enclosed in the kit). We offer as accessories
our kit FB631 Relay Card, through which it is
made feasible to switch greater loads up to 6
A with the Mini-Timer.
PRECISION-SHORT-TIMER
0 TO 10 MINUTES
INFRARED LIGHT BARRIER-RANGE
OVER 18M
Light barrier with invisible infrared light
beam. Transmitter and receiver included!
Ideal for alarm systems, automatical animal
picturing, remote control for garage doors,
etc. With incorporated infrared filter for day
operation!
Operating voltage: transmitter 9V, receiver
12V, relay 1 x ON max. 3A
After pushing the button the relay will switch
on for approximately 2 seconds up to 5 minutes (adjustable) and will then switch off
again. Without adjusting possibility it is possible to set periods over 5 minutes (approximately 10 to 20 minutes).
Operating voltage: 12 Volt
Relay contact: 1 x change over 5 A.
TIME SWITCH MODULE 12 - 15VDC
INFRARED LIGHT BARRIER 50M
Applications of this kit are: announce visitors, warn against burglars, set boundaries,
for science projects,...
Specifications:
Audible (85dB) and Visual LED indicator
alert
Range: 1 to 4m
on/off switch is provided
Power Supply:
Transmitter: 9Vdc / 50mA max
Receiver: 9Vdc / 20mA max
Both units contain a 9V battery holder and
power adapter jack
Dimensions:
Transmitter: 55 x 40mm
Receiver: 100 x 50mm
Note: This kit is not recommended for outdoor use.
This electronic timer-switch module may be
used for exposure devices, battery charger
timing, machines, toys, illumination, etc.
It connects other devices by means of the
installed, potential-free relay switch. The
With the enclosed optics and highly sensitive relay connects at the beginning of a timing
photodetector this light barrier has a maxicycle after the start push-button has been
mum range of up to 50m. The infrared light
pressed and disconnects again automatically
ray is invisible to the human eye. If the light at the end of the pre-set time. The timing
ray between the transmitter and receiver is
cycle may be stopped at any time by pressinterrupted (if a person walks through it) the ing the stop push-button. In addition a 500k
relay in the receiver switches.
Ohm linear potentiometer (HB170) and 2
Operating voltage: transmitter: 9 to 12V
push-buttons, 2 x (HB209) or 2 x (GB723),
70mA, receiver 12VDC 100mA
for “start” and “stop” required (not included).
Relay contact: 1 x change over 3A
Specifications:
INFRA RED LIGHT BARRIER 20M
Supply Current: 20mA (relay is off)
80mA (with the relay switched on)
Output Relay: single connection (SPST)
MONOSTABLE TIMERS
Switching Capacity: max. 3A / 25V
Timing Duration:
without the 500k Ohm potentiometer
MINI-TIMER
adjustable 2 sec. - 10 min
using the 500k Ohm potentiometer
adjustable 10 - 30 min.
2 LED indicators: Green for power and
Red to indicate when the relay is on
This kit uses an IR (infra-red) light beam to
monitor door- and passage-ways for security.
It is suitable for detecting customers entering
a shop, cars coming up a driveway, etc. The
kit consits of a transmitter, that sends a
38kHz pulsed IR beam, and a receiver that
senses the IR beam. These must be aligned
so that the receiver can continuously detect Whenever the enclosed push button is
the IR beam. The receiver has a (SPDT) on- pushed, the light emitting diode will light up
02.80
ADJUSTABLE ELECTRONIC TIMER
PRECISION TIMER
0 TO 40 MINUTES
This electronic timer module can be set for
an adjustable time from 0.1 seconds to 20
minutes. Course time adjustment is done
using 2 jumpers to select 1 of 4 time ranges.
Fine time adjustment is done using a preset
potentiometer. This timer’s trigger and reset
inputs can be activated by connecting it to
the negative supply voltage rail. After the
timer has been triggered, the on-board relay
will be active for the selected time duration.
The relay is deactivated after the selected
time has ended. The relay activation time
can be ended prematurely by resetting the
timer. An on-board red LED indicates the onstate of the relay. The on-board relay can
switch current loads of up to 5 Amps maximum at 12VDC. An on-board fuse is included for current protection. Two N.O. push-button switches are required for trigger and
reset (code: HB209) and also a 12VDC or
16 to 26VAC power supply.
Adjustable time switch for switching operations from approximately 1 second to
approximately 40 minutes. The device
switches on after pressing the key and
switches off again when the adjusted time
has expired. The lapse of time may be interrupted any time with the reset key.
Rupturing capacity: max. 25V 3A
UNIVERSAL START / STOP TIMER
ing cycle. After the timing cycle has finished
the output is connected to the positive 12V
supply rail.
Specifications:
Timing Range: (adjustable) 2 sec. - 6 min.
Output Relay: 1 output connection with
240V / 10A max. contact rating
555 TIMER CIRCUIT
This is a classic monostable 555 timer circuit
that switches a relay for an adjustable period
of time. The time delay is determined by the
values of the capacitor and resistor connected to the 555 IC. The threshold trigger levels
are changed by connecting a voltage divider
to pin 5 of the 555 IC. A start push button
starts the timing cycle. The relay is only
switched on during the timing cycle. A stop
push button can stop the timing cycle before
the total time delay has elapsed. The relay
ADJUSTABLE ELECTRONIC TIMER
output has common, normally-open and This is a compact timer kit with one start and closed connections.
one stop push-button switch. It also has an
Specifications:
adjustable time delay between 1 second and Power Supply: 12 - 15Vdc
15 minutes. The output relay is switched on Timing Range: 1 sec to more than 5 minutes
and the time delay is started simultaneously Output Relay: SPDT, N.O., N.C., COM with
by pressing the start push-button. After the
pre-set time delay has expired the relay will PCB size: 43 x 61mm
switch off. The relay can be switched off at
any time by pressing the stop push-button.
Specifications:
TIME SWITCH 8 TO 8192 SECONDS
Supply Current:
This electronic timer module can be set for
(2.3 HOURS) 12 VDC
while the relay is off: 20mA
an adjustable time from 0.1 seconds to 20
while the relay is on: 55mA
minutes. Course time adjustment is done
using 2 jumpers to select 1 of 4 time ranges. Adjustable Time Delay: 0 - 15 minutes
Fine time adjustment is done using a preset LED Indicator: shines while the relay is on
potentiometer. This timer’s trigger and reset Output Relay Switch: SPDT, with COM., NO.
and NC. contact connections
inputs can be activated by connecting it to
Relay Contact Rating: max. 2A / 240V
the negative supply voltage rail. After the
timer has been triggered, the on-board relay PCB Dimensions: 38 x 69mm
will be active for the selected time duration.
The relay is deactivated after the selected
time has ended. The relay activation time
CLASSIC RC-TIMER
can be ended prematurely by resetting the
This is a long duration monostable timer kit.
12 - 15VDC SUPPLY, 240V / 10A
timer. An on-board red LED indicates the onThe 555 timer IC is used as an astable oscilstate of the relay. The on-board relay can
lator that is set to 1Hz (1 cycle per second).
switch current loads of up to 10 Amps maxiThe 555 output drives a 4020 IC that is a 14mum at 220VAC. An on-board fuse is includstage binary ripple counter. Eleven of the
ed for current protection. Two N.O. push-butcounter’s outputs are jumper selectable for
ton switches are required for trigger and
periods between 8 and 8192 seconds. One
reset (code: HB209) and also a 12VDC or
of the following timing periods can be used:
16 to 26VAC power supply.
8, 16, 32, 64, 128, 256, 512, 1024, 2048,
4096 or 8192 seconds. Once the circuit is
powered the timing period starts. After one
timing period has finished the relay output
changes state and the timer stops. The outThis is a classic monostable, RC-timer circuit put relay can be set to be either on or off
using the discharging of an electrolytic
during the timing period. The timer is reset
capacitor as timing element. Transistors
by switching it off and on again, that is the
sense the capacitor voltage and switch the
same as disconnecting the power supply
relay. The timing cycle is started by pressing and powering it again when required.
the push button. The relay is switched on
Specifications:
only during the timing cycle. The output is
Supply voltage: 12 Vdc
disconnected, (open circuit), during the timOutput Relay: SPDT, N.O., N.C., COM with
02.81
PCB size: 53 x 58mm
THREE TIMER KITS
This set of 3 monostable timers consists of
the following kits:
(EB620), (EB619) and (PB211).
20ms and the count is reset to initial value
4) Timer counts down to 0, sets output low
for 20ms, raps around to 9999 and counts
down. Reset to return to initial value
Specifications:
Output: transistor open collector 0.1A max.
TIME SWITCH WITH TRIAC
0 - 10 MIN 220 VAC
0 TO 60 HOURS START/STOP TIMER
KITCHEN TIMER
This kit can be used for 1 minute to 1 hour
timing. Single button, straightforward operation. Clearly visible 16-led readout. Audible
and visible alarm with discrete pre-alarm.
Auto power-off. Attractive designer enclosure.
Specifications:
it makes use of microcontroller technology
Settings:
1-10’: one minute steps
10-30’: five minute steps
30-60’: 15 minute steps
Basic Accuracy: better than 5%
Power Supply: 3 x AAA 1.5V batteries (not
included)
Dimensions: 76.5 x 75 x 32mm
An easy to build, inexpensive but nevertheless reliable and powerful time switch for
If a device has to be switched off after a
many applications. The delay time is
specified amount of time, then this timer kit
adjustable and can vary from a minimum of
is the ideal solution. Because of the large
40 seconds up to 10 minutes maximum. The
range of the timer, it may be used in almost power load can be anything up to 900 Watts.
any applications, such as switching off televi- The circuit draws its power from the mains
sion and hifi-equipment, lights (staircase
by means of an RC network. The switching
lighting), safety timer for coffee machine,
is done by a heavy duty triac avoiding
dark-room timer, providing a short ringing
mechanical relays that can cause arching,
signal, etc. Push buttons are provided for
delays and interference. The heat sink is
starting and early stopping, but it is also pos- supplied. The timer’s output is powered
sible to control the circuit by means of a
immediately after the timers power has been
relay or a transistor open collector output.
connected. After an adjustable time delay the
Specifications:
output will automatically turn off. The output
Power Supply: 24Vac / 50mA or 220Vac
can be powered by pressing the push-button
switch. The count-down timer is restarted
after the button has been released. The outTiming Range: 3 seconds - 60 hours
put is turned off again after the time delay.
Supply voltage: 220Vac
Output Current: max. 4A
Output Power: max. 900W
MAINS POWERED TIMERS Delay time: 40 sec to 10 min
FAN TIMER
AUTOMATIC LIGHT
TIMER-SWITCH 230VAC
4 DIGIT PROGRAMMABLE TIMER
This 4-digit, programmable, down counting
timer kit makes use of a preprogrammed
microcontroller. It has a 4-digit, 7-segment,
red, 14mm LED display. It only displays seconds and counts down from a maximum of
10 000 seconds, (2.7 hours), after the
START button has been pressed. Also has
STOP button. It has 4 operating modes that
control the, active low open collector, output
when the timer reaches 0:
1) Timer stops at 0 and the output is set
active low. Reset to continue
2) Timer counts down to 0, sets output low,
raps around to 9999 and counts down
3) When it reaches 0 the output is low for
This mains powered timer kit is controlled
with one 230V-rated switch (not included). It
has a triac output for driving 230Vac fan
motors and lighting. The output is off directly
after the power has been connected to this
timer. The output is only powered once the
switch has been switched on. The output
remains powered as long as the switch is
on. A count down timer starts once the
switch is switched off. After an adjustable
time delay the output will automatically turn
off. This turn-off timer is ideal for use in the
kitchen or bathroom for lighting. It is also
suitable for most types of fans. It can be
connected to existing installations. The triac
output has a noise suppression filter.
Specifications:
Output Current: max. 1A
Output Power: max. 200Watt
LED: shines when the output is powered
Adjustable Time Delay: 10sec. to 5min.
02.82
This electronic time-switch module may be
used for automatic staircase lighting, for
exposure devices, alarm alert timing etc. It
has a built-in potential-free, SPDT relay
switch that can be used to switch other
devices on or off. The relay is activated at
the beginning of a timing cycle, after the start
push-button has been pressed, and is deactivated again automatically at the end of the
pre-set time. The timing cycle may be
stopped at any time by pressing a stop
push-button.
Specifications:
Output Relay: with COM.,NO.,NC. (SPDT)
Switching Capacity: max. 3A / 230Vac
Timing Duration:
using a 1M Ohm linear potentiometer to
adjust: 1 sec. - 30 min
1M Ohm linear potentiometer (HB171) and
two electrically insulated push-buttons
2 x (GB723) for “start” and “stop”
MAINS TIMER (200V / 240V)
A 1 to 5 minute timer for the mains 200/240V
power supply using standard electronic
building blocks. Uses LM358 and a 2N6075
triac. Has START & RESET buttons.
Educational kit mounts on box provided to
show how it works. Caution: Uses mains
200/240V power supply. Kit must be safely
placed in closed box for routine use.
ing pulse time and it is off during pause time.
The pulse and pause times can be adjusted
independently of each other.
Specifications:
Adjustable Pulse Time: 0.5 to 5 seconds
Adjustable Pause Time: 2.5 to 60 seconds
LED Indicator: shines during pulse times
Output Relay Switch: SPDT, COM. with dry
switch-over NO. and NC. contacts
Relay Contact Rating: max. 3A / 24V
when the trigger signal is removed.
Oscillation will continue from where it
stopped when trigger is re-applied.
Timing Ranges:
1 - 255 seconds
10 - 2550 seconds
1 - 255 minutes
10 - 2550 minutes
MULTIFUNCTION RELAY SWITCH
MULTIFUNCTION TIMERS
MICROCONTROLLER-BASED
MULTI MODE TIMER
PERIODIC
RELAY SWITCHES
This programmable timer kit makes use of a
preprogrammed microcontroller. It has 7 timing modes and 4 time delay ranges that are
INTERVAL SWITCH
selected with on-board DIP-switches. No
other adjustments are required. An on-board,
optocoupler, trigger input is provided for
electrical isolation between the trigger
source and timer kit. It also has a reset input
and a relay output switch.
Specifications:
Trigger Voltage: 6 - 81V
Trigger Current: 5 - 80mA
Trigger Voltage Isolation: 2500V
The device is suitable for use as: interval
Trigger Pulse Width: min. 20msec.
switch for wiper/washer for cars, pulse
switch for lamps, motors, etc. Pulse genera- Output Relay: SPDT, N.O., N.C., COM with
240V/10A max. contact rating
tor for alarm systems, etc.
Timing Modes:
Pulse time: approx. 1 to 140 seconds
1) Level-trigger signal enables relay and
Pulse period: approx. 0.2 to 12 seconds
starts timing. Relay operates for set time
(adjustable)
then releases. If trigger signal is removed
Operating voltage: 7.5 to 15 V
the timing resets and relay releases.
Relay: max. capacity of 6 A.
2) Same as (1) except that when the edgePulse indication: LED
trigger signal is removed the timing is not
reset. Triggering during timing causes the
timer to restart (retrigger) timing.
INTERVAL TIMER
3) Level-trigger starts timing. At end of set
time the relay connects until trigger signal is
removed or if reset. If trigger signal is
removed during timing, the timer resets and
relay connects.
4) Trigger signal enables the relay, but timing
only starts after trigger signal has been
removed. Relay releases after set time.
5) Trigger signal enables relay to oscillate
with on and off time equal to set time, (50%
duty cycle). Oscillation stops if reset or when
the trigger signal is removed.
This is a periodic interval timer kit. It can be 6) Level-trigger signal enables relay and
used for the intermittent switching of circuits starts timing. Relay operates for set time
then releases. If trigger signal is removed
and equipment: blinking light, video / photo
single frame shooting, slide projector control, the timing pauses and relay is on. When trigger signal is re-applied timing will continue
miniature models, etc...
until the total set time then relay releases.
This design makes use of the well-known
NE555 timer IC (integrated circuit). The 555 7) Trigger signal enables relay to oscillate,
starting with off-time, that is equal to the set
IC is used as an astable oscillator that
time. After the set time the relay is connectswitches the on-board relay switch on and
off periodically. The relay is switched on dur- ed for 2 seconds and then it releases as the
cycle is restarted. Oscillation stops if reset or
02.83
This is a programmable, multifunctional timer
kit. It makes use of a preprogrammed microcontroller. Two pre-programmed delays and
learning mode for delay times. EEPROM
data storage to prevent memory loss if the
power is removed. Functions are selected
with 4 on-board DIP-switches.
It has 15 different functions:
1) Momentary Mode: relay is on only while
the button is being pressed
2) Toggle Mode: (latching) push once to
switch relay on then push again to switch off.
3) Start/Stop Timer: relay starts when the
button is pressed and stops after the pre-set
time, even if the button is held down.
4) Staircase Timer: Push button to switch the
relay on and after pre-set time it will go off.
Pushing button while on will restart the timer.
5) Dual-Time Staircase Timer: Short push
starts with delay time 1. Long push starts
with delay time 2. Relay switches off after
selected delay time has elapsed.
6) Non Re-triggerable Timer: Push button to
switch the relay on and after pre-set time it
will go off. Pushing the button during on-time
has no effect.
7) Turn-on Delay: Push the button continually for a pre-set time then the relay will switch
on. Switches off when the button is released.
8) Timer with Early Retrigger Prevention:
Push button to turn on with pre-set delay 1.
After time delay 1 has elapsed the relay is
held off for minimum time delay 2.
9) Turn-off Delay: Push button to switch the
relay on. The pre-set time starts after the
button has been released and after pre-set
time it will go off. Pushing the button during
the timing period will restart the timer.
10) Interval Timer: The relay switches on
and off periodically only while the button is
being pressed. On: delay 1. Off: delay 2.
11) Blinking Circuit: The relay switches on
and off periodically only while the button is
being pressed at a fixed frequency of 1Hz.
12) Blinking Circuit with Timer: Relay switches on and off periodically at a fixed frequency of 1Hz if the button is pressed. After the
button has been released, the timer starts
and turns off after the pre-set time has
elapsed. Pushing the button while the timer
is on will restart the timer.
13) Random Timer: The relay switches on
and off in a random manner only while the
button is being pressed. 9 min. to 2.5 hours
between every transition.
14) Trigger-at-release Timer: Push the button
then release it to switch the relay on. The
relay switches on and the pre-set time starts
after the button has been released. After the
pre-set time it will go off again. Pushing and
releasing the button while the timer is on will
restart the timer.
15) Interruptable Real Time Staircase Timer:
Short push starts with delay time 1. Long
push starts with delay time 2. Relay switches
off after selected delay time elapses even if
the button is held down continually. The
timer can be stopped by briefly pushing the
button.
It has 1 on-board tactile switch and an input
for an external push-button switch like
(GB723), (not included). The SPDT output
relay switch has transient protection for its
COM., N.O. and N.C. contacts. Screw terminals are used for connections. Suitable for
controlling incandescent ,halogen and fluorescent lighting, fans, valves, buzzers, etc.
Specifications:
Supply Voltage: 9 - 12ac or 12Vdc
Trigger Pulse Width: min. 20msec.
Trigger Voltage: pull input active high to the
positive supply rail, input range: 5 - 12Vdc
Trigger Current: 3 - 10mA
2 sec. up to 12 days
max. 2.5A / 220Vac contact rating
MICROPROCESSOR
CONTROLLER / TIMER
Dimensions:
Operating Front Panel: 120 x 235mm
Building-in Depth: 50mm min.
TESTING INSTRUMENTS
AND DEVICES
HANDHELD LCD OSCILLOSCOPE
This timer kit is controlled by a microprocessor. It has a backlit liquid crystal display
where all data, such as: output relay number,
the on/off state or temperature setting of a
specific relay switch, the day of the week
and time of day are displayed. It has an aluminium operating panel with four membrane
keys that are used for programming this kit.
It has four output relay switches that are
controlled independently of each other. Each
relay has a timing program, that is defined
MULTIFUNCTIONAL
by the user, that determines when it should
TIMER MODULE 230VAC
be switched on or off. The program, for each
relay, can be up to 50 lines long. Up to four
external temperature sensors can be connected to this kit for sensing the temperature
at four different places. Each relay channel
can be programmed to control temperature,
within user defined temperature limits, by
using the sensor information and accordingly
switching an external heating device.
Specifications:
Battery for Memory Back-up: 9V (EB160)
(the battery is not included)
Display: 1 line, 16 character, backlit LCD
This multifunctional timer module is ideal for Time: 24 hour clock with day indication
4 Opto-coupler temperature sensor inputs:
controlling light bulbs, halogen lamps, fluoSampling Rate: one sample per second
rescent lighting, fans, electric valves,
Optional: (to measure / control temperature)
buzzers, etc, ...
It makes use of a microcontroller. Thanks to then use up to four of the following kits:
Temperature Sensor (GC098) or
the EEPROM, this module’s delays are
Temperature Sensor with Display (GC100)
memorised, even in the event of a power
This unit detects the presence and tests for
failure.
the proper operation of the connected
This timer has 15 operating modes for timtemperature sensors
ing, switching, blinking, interval, random
4 Output Relay Switches: RF-noise free
switching, staircase light control, etc...
SPDT with COM. NO. and NC. contacts
Output Relay contacts are protected against
voltage spikes that are caused by the switch- Relay Contact Rating: max. 5A / 220V
4 LEDs: Indicate which relay-switches are on
ing of inductive loads
It can be mounted in a switch box on a DIN 50 Programming steps per relay switch
(thus 4 relays have 200 in total)
rail or on a wall
There are program instructions for switching
Specifications:
or temperature controlling events:
Output Relay Contact Rating: SPDT with C, 1) for a specific time of day on every day,
like 12:34 all seven days of every week
N.O. and N.C. max. 5A / 230V
2) a specific time of day only on a specific
Output Power: 1100VA max. at 230Vac
day of every week, like 12:34 on Tuesdays
Learning mode for timing delays of 2s up to
Programming Resolution:
12 days
Time: 1 minute
Time Resolution: ±2 seconds
Temperature: 0.1ºC
Two pre-programmed delays
Each output has programmable temperature:
Measuring / Control Range: -40 to +150ºC
Weight: 282g
Accuracy: ± 0.1ºC
Hysteresis Range: 0 to 25ºC, (0.1ºC steps)
push-button switch for controlling (GB723)
02.84
This is a compact handheld oscilloscope kit.
It has handy features which enables you to
perform on-the-spot measurements that are
quick, easy and accurate. Its high-contrast,
wide viewing angle LCD screen enables
operation under normal daylight conditions.
All functions are accessible by means of a
tactile keyboard with a pleasant touch feeling. The current operating mode is displayed
on-screen. If desired, auto-setup mode takes
care of all scope settings for instant visualisation of waveforms. The marker function
enables you to make accurate measurements of voltage, time and frequency. Can
be used as a digital voltmeter that displays
true rms, dB, peak-to-peak and DC volts.
With its built-in variable gain sine generator,
it allows easy service of audio equipment,
etc... A RS232 port enables screen data to
be sent to a PC for use in different applications. It has a built-in battery charging circuit
with indicator LED for rechargeable batteries
(batteries are not supplied).
Features:
True RMS or peak to peak readout
dB measurements
markers for voltage and time
auto setup function
DC readout with zero reference function
frequency readout through markers
sample-dot join function
screen hold function
waveform memory (only 1 location)
grid or ruler function
adjustable trigger level
trigger mode: normal, auto or single
trigger edge: rising or falling
RS232 data output to computer
auto power off after 8 min. (can be disabled)
Specifications:
Supply Voltage: 9Vdc (unregulated adapter)
Battery Back-up: 6 of 1.2V AA NiMH cells
Charge Time: 14 hours min.
Maximum Sampling Rate:
for repetitive signals: 5MHz
for single shot events: 0.5MHz
Input Amplifier Bandwidth (-3dB):
750kHz at 0.4V / Div. setting
Auto Set-up Function Bandwidth:
for repetitive signals: 400kHz
Input Impedance: 1M Ohm // 20pF
Maximum Input Voltage: 100Vp (AC + DC)
Input Coupling: DC, AC and GND
Vertical Resolution: 8 bit
(6 bits displayed on LCD)
Linearity: ±1 bit (for 8 bit data samples)
A/D-Converter Accuracy: ±2 bit
LCD Graphics: 64 x 128 pixels, high-contrast
dB Measurement Range: -73dB to +40dB
True RMS Range: (only for AC signals)
0.1mV to 80V (2.5% accuracy)
Peak to Peak and DC Measurement Range:
0.1mV to 180V (2% accuracy)
Timebase Range: (for repetitive signals)
20 and 50µs,
0.1, 0.2, 0.5, 1, 2, 5, 10, 20, and 50ms,
0.1, 0.2, 0.5, 1, 2, 5, 10 and 20s / Div.
Input Sensitivity: 5, 10, 20 and 50mV,
0.1, 0.2, 0.4, 1, 2, 4, 8 and 20V / Div.
Sine Wave Output: ±400Hz and
adjustable voltage: 0 - 1Vrms // 10k Ohm
Square Wave Output: ±400Hz, 3.5Vpp
Operating Temperature Range: 0 - 50°C
Weight: 600g (excluding battery weight)
Insulated measurement probe: (EB310)
Power Adapter: 9Vdc / 500mA (GB836)
Hints:
If the scope shows ‘startup’ troubles, (the onled lights, but the display remains blank),
when run on batteries, try replacing T6,
BC547B or BC547C with a BC517, (DB464),
and replace ZD1, 5V6 with a 6V2, (HB344)
type.
CONTINUITY TESTER
WITH PIEZO BUZZER
Continuity tester with piezo buzzer
CONTINUITY TESTER
tronics laboratory is the oscilloscope. With a
good oscilloscope, the experienced technician can make many measurements which
are otherwise difficult if not impossible to do.
One of the most important features found in
a good oscilloscope is the COMPONENT
TESTER. The component tester is an add
on circuit which by using a small AC voltage
and placing the components in a simple circuit performs a dynamic test giving a quick
and positive QUALITATIVE and approximately QUANTITATIVE indication of the
This is the most important piece of equipcomponent’s nature, its state and value. The
ment for testing and measuring digital equip- horizontal and vertical dimensions and
ment. It is usually used in fault finding and
shape of the displayed figures are important.
testing but can also assist in design work
Components that can be Tested:
and to find out how digital equipment works. Passive Components:
Switch for either TTL or CMOS. Our own
Inductors (Coils), Capacitors (Condensors)
modern design using a PUT. Includes detecand Resistors
tion circuit for very fast pulses. Gives visual
Semiconductors:
(3 LEDs) and audio (piezo buzzer) response.
LEDs, Plain-, Schottky-, Zener-Diodes,
Diacs etc.
Working Voltage: 8Vac (mains transformer is
included)
LOGIC PROBE 8-15 VDC
Current: 50 mA
LOGIC PROBE
A must for those who work with digital circuits. It will detect and display the logic
states of “1” and “0” by lighting respective
LEDs and will also give and indicate with a
third LED if it detects a pulse train. Suitable
for TTL and CMOS circuits.
Power supply: 8 to 15 VDC / 20mA
PCB size: 80x20mm
MAINS VOLTAGE DETECTOR
TRANSISTOR TESTER
WITH TESTING CLIPS 9 VDC
With this device wires can be very easily
checked for mains voltage. It can be used to
search for wires installed in or behind walls
or to trace interruptions in wiring. A flashing
LED indicates whether or not voltage is present. The flashing speed indicates how close
by the wire is. If an audible signal is also
This is a circuit that will help you sort the
desired, space has been provided on the
transistors you have in your electronic work- PCB for a buzzer to be connected.
shop, and will also help you choose the best Specifications:
of them for your projects. It will also show
Detection of Mains Conducting Cables
you if the transistor is PNP or NPN. The cir- LED Indication (buzzer optional)
cuit can be used to check some types of
Adjustable Detection Distance: max. 10cm
diodes. The printed circuit board is small and Distance Indication
if you use a small box to put it in you will
Supply Voltage: 9V battery (not included)
have a convenient and portable transistor
tester.
METAL SEARCHING DEVICE 9VDC
OSCILLOSCOPE COMPONENT
TESTER 8V AC
A continuity tester is one of the most useful
pieces of test equipment to have. It is used
for testing the electrical continuity between
two points. Our tester will ``buzz`` up to a
specified resistance or less. Two on-board
resistance ranges available. Full theory of
operation given. The user may adjust the
resistance ranges to suit his own requirements.
Power supply: 9V battery (not supplied).
The most important instrument for the elec-
02.85
The device locates any metal element upto a
maximum of 6 cm in walls, floors, etc.
Indication is realized through LED. The sensitivity is adjustable. With the help of the ferrite antenna exact locating is possible.
METAL DETECTOR
Output Voltage: 150mVrms
Output Impedance: 1Kohm
Power Supply: 12 - 15VDC or 9 - 12VAC
Supply Current: 5mA
recommended Housing: (G410)
MISCELLANEOUS KITS
LED SERIES PRINTED CIRCUIT
BOARD 230VAC
SIGNAL TRACER / INJECTOR KIT
LED signal lamp which can be directly operated at 230VAC. Use: signal lamp, operation
indication for 230VAC devices etc.
This metal detector kit is ideal for beginners.
It is undesirable to penetrate a water pipe or
electric cable while drilling a hole into a wall.
It can have catastrophic consequences.
Likewise, drilling into gas pipes or central
heating pipes can be extremely hazardous.
This handy metal detector can be used to
determine beforehand whether there are
metal objects concealed inside a wall, ceiling
or floor. It is operated with a single pus-button switch. A LED indicates if a metal object
is in the vicinity of the detector.
Specifications:
Power Supply: 9V battery (EB160) (not
included)
Metal Detection Range:
is adjustable up to 8cm maximum
On LED-Indicator: the brightness of the LED
indicates the distance and the size of the
metal object
Hints:
If you experience difficulties with the calibration of the unit (if the LED does not turn off,
if there is not any metal present), replace C1
with a ceramic 1.2nF, (AA467), capacitor.
This problem is due to the manufacturing tolerances on the component values and differences created when winding the coils.
This signal tracer / injector has been
designed to inject or detect a specific signal
into an audio circuit in need of repair (such
as amplifiers, radios, tone controls, and
more) so as to detect the fault. In this way
problems can be traced more easily. The signal tracer may also be used as a simple
monitor or amplifier.
Injector: 0-2.5Vrms output (adjustable)
Output impedance: 1.5K Ohm
Frequency: approximately 1KHz
Tracer: 3.5mV to 10Vrms sensitivity
Gain: 40dB
Input impedance: 50K Ohm
Output power: 0.5W / 8Ohms
Power supply 9-12VDC or 7-9VAC / 150mA
PCB size: 60x53mm
EXPERIMENTATION
PROJECTS
EXPERIMENTATION
PROJECTS
10-IN-1 ELECTRONIC
PROJECT LAB KIT 3VDC
CABLE POLARITY CHECKER
A great introduction into the world of electronics. Educational , fun with solderless,
spring terminal connections that make it safe
and easy to operate. Easy to read fully illustrated labstyle manual is included.
Build 10 exciting circuits: morse code, burglar alarm, radio, ...
ORDER CODE: AB033
MANUFACTURER CODE: EL101
PINK NOISE GENERATOR
This kit consists of two parts that must be
connected to the ends of a pair of cables. It
has 4 indicator LEDs: to check cables for
continuity (short between 2 wire ends), to
20-IN-1 ELECTRONIC
check for open circuits and identify individual
wires using the 2 polarity check LEDs, (correct or wrong polarity), and the end connecting clips. Ideal for speaker cable polarity
checking. Pushbutton operation with auto
power off.
Specifications:
This kit is used to analyse the acoustic propPower Supply: 9V battery (not included)
erties of a room (usually a living room). A
good pink noise generator together with a
Dimensions:
spectrum analyser is indispensable.
Main Board: 56 x 40 x 33mm
Moreover, a microphone with as linear a freRemote Board: 40 x 7mm
This electronic kit is safe, solderless, excitquency characteristic as possible (from 20Hz
ing, educational and fun! Spring terminals
to 20kHz) is needed. If you have an graphic
make it safe and easy to operate. No tool or
equaliser available, then the response can
soldering required
not only be checked but also corrected.
Easy-to-read illustrated operating manual
Easily adapted to produce “white noise”.
included
Specifications:
Learn as you perform 20 exciting experiit generates Pseudo Random Digital Noise
ments involving light, magnetism, sound and
Regulator Sliding Length: 33 bit
touch
Clock Frequency: adjustable 30 - 100kHz
Learn and build your own SENSOR ROBOT
Pink Noise Filter: 3dB / octave (20Hz to
safely and easily
20kHz)
02.86
Power Supply: 1 x 9V battery (not included)
ORDER CODE: AB034
30-IN-1 ELECTRONIC
A great introduction into the world of electronics. Safe, educational and fun with solderless connections. Easy to read fully illustrated labstyle manual is included.
Build 30 exciting circuits: a radio, burglar
alarm, water detector, morse code practice
circuit, simple computer circuits and much
more.
Power Supply: 2 x 1.5V AA cells (not included)
ORDER CODE: AA911
Educational and fun projects, safe and
solderless
Build 300 exciting circuits - safely and
easily
Practical and illustrated lab-style manual
included
300 electronics experiments in 1 package
Specifications:
Using this workstation gives one a great
introduction into the world of advanced electronics
Easy, quick and step-by-step learning of the
basics of electronics / no soldering or tools
are required
Everything you need to build 300 exciting
electronic projects:
a transistor radio, an IC organ, a burglar
alarm, a battery checker, a delayed timer, an
electronic game, a voltage-controlled amplifier, multiplier, a multiple counter, a digital light
dimmer, a tone burst generator, an audio signal tracer, an electronic candle, a voice level
meter, a metal detector, a rain detector, a
voltage drop alarm, a logic checker, a function generator and much more
Power Supply: 6 x 1.5V AA cells (not included)
ORDER CODE: GB658
DIGITAL TRAINER
130-IN-1 ELECTRONIC
A great introduction into the world of electronics and the fun way of learning about
electronics and of studying the wonders of
science. No experience required. Fun with
solderless, spring terminal connections that
make it safe and easy to operate. Easy to
read, fully illustrated, step-by-step, labstyle
manual for easy project construction is
included.
Build 130 exciting circuits: build a radio, an
AM broadcasting station, an electronic
organ, a kitchen timer, logic circuits and
much more.
Comes with built-in speaker, 7-segment LED
display, two fully integrated circuits and
rotary controls
Power Supply: 6 x 1.5V AA-cells (not incl.)
ORDER CODE: AB143
ELECTRONIC LAB KIT
300-IN-1-WORKSTATION
This is a solderless, multi-purpose Digital
Trainer, (work station), that is ideal for digital
circuit prototyping. The main purpose of this
Digital Trainer is to provide the junior college, training center, factory and amateur
hobbyist with the most convenient way of
learning digital logic design and training.
Specifications:
The Digital Trainer consists of:
Book: “User’s Guide and Experiment of
Basic Gates”
Power Supply: 230Vac to 9Vdc/1.5A adaptor
(is supplied)
Solderless Breadboard: 117x172mm,
Two Bounce-free Push-buttons
Eight 0V/5V Logic Level DIP-switches
User Power Supply: 5Vdc / 750mA
Power Clip Terminals for Logic Probe
Eight Buffered LED Display
Two Adaptors: pin tip hole to banana socket
Two Adaptors: pin tip hole to BNC socket
Clock Generator with Selector Switch:
10 - 40Hz and 1 - 20kHz, 0 - 5Vpp
Fine Clock Frequency Adjusting Knob
Logic Probe LP-2800: (AA713) (is supplied)
Dimensions: 310 x 255 x 50mm (LxWxH)
Weight: 0.9kg
ORDER CODE: AB336
MANUFACTURER CODE: DT-01
Features:
02.87
DIGITAL LAB
This is a solderless, multi-purpose Lab,
(work station), that is ideal for digital circuit
prototyping. The main purpose of this Lab is
to enable the user to conveniently acquire a
solderless breadboard with DC power supply, signal generator, digital volt meter, eight
LED display, two 7-segment LED displays
and logical function switches.
Specifications:
Power Supply: 220 - 240Vac / 0.5A max.
The digital Lab consists of:
Book: User Manual and Practice
Breadboard: 117x163mm, 1896 connections
Dual Adjustable DC Supply: 0 to +/- 15Vdc
Dual DC Fixed Power Supply: +/- 5Vdc
DC supplies are short-circuit protected
Function Generator: 1 Hz - 100kHz, 0 - 6Vpp
select from sine, triangle and square wave
3½ Digit LED Voltmeter: 0.2, 2, 20 and 200V
Two 7-Segment LED Displays
Eight Buffered LED Display
Eight data line DIP-switch
Two voltage selector switches
Two tactile push-button switches
Weight: 4.2kg
ORDER CODE: AB365
MANUFACTURER CODE: IDL-800
ANALOGUE LAB
This is a solderless, multi-purpose Lab,
(work station), that is ideal for analogue circuit prototyping. The main purpose of this
Lab is to enable the user to conveniently
acquire a solderless breadboard with DC
power supply, signal generator, analogue
current- and voltmeter, potentiometer and
switches that are oftenly used, but not easily
installed.
Specifications:
Power Supply: 220 - 240Vac / 0.5A max.
The analogue Lab consists of:
Book: User Manual
Breadboard: 117x163mm, 1896 connections
Dual Adjustable DC Supply: 0 to +/- 15Vdc
Dual DC Fixed Power Supply: +/- 5Vdc
DC supplies are short-circuit protected
Function Generator: 1 Hz - 100kHz, 0 - 6Vpp
select from sine, triangle and square wave
Ampere Meter: 0 - 100µA, impedance:1Ohm
Voltmeter: 0 - 30Vdc, impedance: 320kOhm
Two Slide Switches: 2-position (SPDT)
One Slide Switch: 3-position (SP3T)
One Rotary Switch: 6-position (SP6T)
One Potentiometer: linear 1kOhm
One Potentiometer: linear 100kOhm
One Speaker: 8 Ohm
Two voltage selector switches
Weight: 4.2kg
ORDER CODE: AB364
MANUFACTURER CODE: IDL-600
NO SOLDERING
REQUIRED PROJECTS
ELECTRONIC AM RADIO KIT
(CRYSTAL RADIO)
It's great fun to build your own amplitude
modulation (AM) radio and tune in to your
favourite AM radio stations in the 500 1600kHz frequency band. This experimental
kit is used to build an electronic crystal AM
radio. A crystal diode converts radio frequency (RF) power to audio power. Batteries are
not required since the radio is powered by
radio waves received with a long antenna.
Learn how radios work following the easy-toread, illustrated operating manual. It is safe,
solderless, exciting, educational and fun!
One crystal earphone is supplied.
ORDER CODE: AB145
Earphone is included.
Specifications:
Frequency Range: 520 - 1650kHz (AM)
and 88 - 108MHz (FM)
Power Supply: 1 x 9V battery (not incl.)
ORDER CODE: AB146
BASIC ELECTRICITY 50-IN-1
PHYSICS AND MAGNETISM
PROJECTS LAB KIT
With this experimental kit, containing a set of
This BASIC ELECTRICITY 50-in-1 kit was
43 elements, it is possible to perform 153
designed to demonstrate elementary principhysic and magnetism experiments.
ples in electricity. The 50 experiments that
A booklet is included that describes every
can be performed with this kit demonstrate
experiment in detail.
basic principles such as:
Power Supply: 1 x 9V battery (not incl.)
Conductivity properties of materials that are
ORDER CODE: AB144
found in and around the house.
Electrical continuity in circuits.
Electrical discontinuity in circuits resulting
SOLAR PLASTIC FAN
from poor electrical connections.
Electrical shorts in circuits.
Functioning of elementary electrical components such as switches, filament lamps,
fuses, batteries, resistors and diodes.
Use this plastic fan with electric motor
(AA902). It can be attached to a 2mm motor
axis.
Outer diameter: 58mm
ORDER CODE: AA926
This kit is ideal for the absolute beginner
with no previous experience in electrical circuitry. It is suitable for training students:
grade 5 to 9 (standard 3 to 7). Every school
teaching fundamental principals of electricity
and every child in South Africa that is lacking
this basic knowledge needs this kit.
This kit is rock bottom priced so that schools
and pupils with limited funds can afford it.
ORDER CODE: AB788
THE LITTLE ELECTRO-TECHNICIAN
4.5VDC
ELECTRONIC AM / FM RADIO KIT
Easy instructional construction set for beginners. The cables are not soldered, only
screwed or twisted. The experiments are
described with diagrams and helpful descriptions. Some of the experiments that can be
performed are:
Blister pack that contains one plastic fan that 1) ordinary circuit with small lamp
can fit onto a 2mm axis: 1 x (AA926).
2) electromagnetism
3) current proof through compass needle
ORDER CODE: AB749
Learn to build your own AM / FM radio using
4) radio transmitter system (Marconi)
this experimental radio kit. It is an education5) generator
al, safe, solderless and fun project. 1
02.88
6) self made battery and many more.
Included: compass with coil, small lamp,
electro-motor, luster terminals, litz, detailed
instructions.
Supply voltage: 4.5V
ORDER CODE: AA314
SOLDERING
FOR STARTERS
SOLDERING STARTER KIT 1
This soldering starter kit is ideal for
beginners.
It contains:
a soldering iron: 25Watt / 230Vac
solder wire: 17g of 1.0mm solder wire
contained in a dispenser
a soldering iron stand: (AA065)
a pair of wire-cutters: (EB256)
2 soldering kits: Flashing LEDs (FB662) and
Sound-to-light Unit (FB663)
ORDER CODE: GB613
MANUFACTURER CODE: K/START
SOLDERING STARTER KIT 2
This soldering starter kit is ideal for
beginners.
It contains:
a miniature 3.5 digit multimeter: 19 ranges,
500V, 10A, 2M Ohm and diode/transistor test
miniature long nose pliers: (EB257)
2 soldering kits: Electronic Dice (FB669) and
Pocket VU-meter Wireless (EB524)
Desoldering Solder Pump: (QB066)
Precision Screwdriver Set: 2 cross and 4 flat
screwdrivers
ORDER CODE: GB614
MANUFACTURER CODE: K/START2
02.89
02.90
CONSUMER PRODUCTS
CLOCKS
CLOCK WITH HYGROMETER AND
IN / OUT THERMOMETER
MULTIFUNCTIONAL TRAVELLING
CLOCK WITH BACKLIGHT
QUARTZ CLOCK MECHANISM
This is a clock mechanism that can be used
inside self-made wall clocks. Damaged
clocks can be repaired by simply replacing
the damaged clock mechanism with this one.
The clock’s timing is regulated by means of
a quartz crystal. This unit has a suspension
clip that can be used for mounting the clock.
Specifications:
Power Supply: 1 x 1.5V AA-cell (not incl.)
use: 1.5V alkaline AA-cells
ORDER CODE: AC849
CLOCK WITH ALARM, DATE,
STOPWATCH, COUNTDOWN AND
THERMOMETER
Features:
Large display:
Top display: time clock
middle display: temperature ºC / ºF
bottom display: relative humidity
Outdoor sensor with 3m weatherproof
cable (included)
Memory for min. and max. temperature and
relative humidity
Built-in stand for desktop display, but can
also be mounted on a wall
Specifications:
Power Supply: 1 x 1.5V AAA cell (included)
Digit height: 15mm
LCD size: 41 x 60mm
Dimensions: 108 x 58 15mm
ORDER CODE: GB712
Features:
Large LC-display with backlight
Alarm clock and snooze function
200-year Calender (1900 - 2099)
Temperature readout in ºC or ºF
2 countdown functions
Selectable 12 / 24 hour format
Specifications:
Coloured black
Power Supply: 1 x 1.5V AAA cell (not
included)
ORDER CODE: AB014
PEN HOLDER WITH CLOCK
ALARM, DATE AND TEMPERATURE
TRAVELLING CLOCK WITH, DATE,
TIMER, ALARM/COUNTDOWN
AND THERMOMETER
Features:
Large display:
Top display: time clock
middle display: month, date and day
bottom display: temperature
Countdown: max. 29:59:59
Temperature: switchable between ºC / ºF
Alarm with snooze function
Freestanding device
Specifications:
Power Supply: 3V CR2025 batt. (included)
ORDER CODE: GB711
Features:
Large LC-display with light
Alarm clock and snooze function
200-year Calender (1900 - 2099)
Temperature readout in ºC or ºF
countdown and count-up function
Selectable 12 / 24 hour format
Specifications:
Coloured black
Power Supply: 1 x 1.5V AAA cell (not
included)
ORDER CODE: GB728
Features:
5 Different modes:
Time mode: time, week and temperature
Alarm mode: set daily alarm with 8 tunes
Birthday mode: birthday reminder-song
Timer mode: countdown timer with ring
Thermometer mode: shows temperature
12 or 24 hour display mode
Specifications:
Power Supply: 1 x 3V CR2025 battery (not
included)
ORDER CODE: AB010
LIGHT PRODUCTS
LED AND HALOGEN HEADLAMP
Features:
A 2 -in-1 LED / Halogen headlamp
03.1
Dual bulb headlamp
Adjustable headband
Waterproof battery compartment
water-resistant
Long-life LED: 100 000 hours
Focus control (for Halogen lamp)
Operating time:
LED: 200 hours (alkaline cells)
Halogen: 11 hours (alkaline cells)
Specifications:
Power Supply: 4x1.5V D cells (not included)
Bulb type:
LED: white 5mm diameter
Halogen: 5.2V 5W G4 Halogen bulb
ORDER CODE: GB649
LED BIKE LIGHT
2 channels with 15 frequency bands each
2 VU meters indicate output signal levels
the housing is made to fit a 19 inch rack
input/output: actively balanced/unbalanced
2 adjustable master signal level controls
2 passive bypass switches
2 signal clipping indicator LEDs
built-in low-cut filter
Specifications:
2/3 octave frequency band isolation
filter type: constant Q
signal gain range: ± 12dB
low-cut filter: 20Hz / -18dB
total frequency range: 20Hz - 20kHz ± 1dB
THD + noise: < 0.01%
signal-to-noise ratio: > 110dB
Weight: 4.4kg
ORDER CODE: AC013
TOYS
TWO-WAY RADIO SET
Features:
Ultrabright LED bike light
Long-life LED: 100 000 hours
Mounting braket fits all types of bicycle
frames
Angle and direction entirely adjustable
Easy to take with and use a clip-on light
Operating time: 80 hours (alkaline cells)
Specifications:
Power Supply: 3 x 1.5V AA cells (included)
Bulb type: white LED 5mm diameter
Dimensions: 82mm x 28mm diameter
ORDER CODE: GB650
WHITE LED LIGHT
Features:
Ultrabright White LED light
Cylinder-shaped with keychain
Specifications:
Power Supply: 3 x 1.5V LR44 cells
3 x (GB718) (are included)
Bulb type: white LED 5mm diameter
Weight: 35g
ORDER CODE: AB011
AUDIO PRODUCTS
DUAL 15-BAND GRAPHIC
EQUALISER WITH VU METERS
Professional design with perfect reception
and long range (max. 2km). Perfect for outdoor communication, like mountaineering,
biking, hiking etc.
Features:
Personal Mobile Radio transmitter /
receiver set of two handsets
Selectable 8 channels 446 MHz
LCD Display with blue backlight
Call push-button
VOX and Squelch control
Beep sounder
Low-battery warning
2 Earphones included
2 blue and 2 red changeable front covers
2.5mm Jack for microphone/earphone
Specifications:
Output Power: 500mW maximum
Operating Frequency: 446 MHz
Number of Channels: 8
Power Supply for Set:
total of 8 x 1.5V AAA cells (not included)
Operating time: 15 hours maximum
when using alkaline cells (90% standby,
5% transmission, 5% reception)
ORDER CODE: GB702
This Radio controlled helicopter is easy to
pilot thanks to its proportional control and
can fly over 15 meters!
Features:
Contains: 1 Helicopter, 1 remote control, 1
helipad (charging/launching platform) and 1
user manual
Specifications:
The helicopter can change direction and has
variable rotor speed
Operating Frequency: 27.195 MHz
Dimensions: 400 x 365 110mm
Control Range of Helicopter: max. 100m
Flight time: on a full charge and in low wind
conditions the helicopter will fly between
30 sec. - 2 minutes
Note: Before the first flight you should
charge the helicopters battery 3 times.
Built-in Safety Feature: built-in temperature
sensor automatically limits the rotor speed
when the helicopters battery becomes too
hot, causing the helicopter to land gently
The Remote control requires 6 x AA cells
(alkaline)
The Helipad requires 8 x D cells
(alkaline)
The Helipad contains a charging circuit for
the helicopters battery
The Helicopter contains a built-in rechargeable battery (included)
Full-charging time is about 3 minutes
Please note: This rechargeable 7.2V Ni-MH
battery is overstrained during charging and
has a very limited lifetime. 1 Hour charging
at 0.2A is better.
Optional:
rechargeable battery (AB285)
remote control antenna (AC603)
helicopter housing (AC604)
helicopter motor (AC605)
helicopter wing set (AC606)
ORDER CODE: GB824
REMOTE CONTROL ANTENNA
This is a spare telescopic antenna for the
remote control unit of helicopter (GB824).
M3 mounting bolt with 4mm length at base,
fully extended length of antenna is 800mm
ORDER CODE: AC603
HELICOPTER HOUSING
RADIO CONTROLLED
HELICOPTER
This is a spare painted, polystyrene housing
for the helicopter (GB824).
ORDER CODE: AC604
This is a stereo graphic equaliser that
enables one to control the frequency composition of music. Each channel is divided into
15 frequency bands. Each frequency band
has its own slider knob that is used to adjust
the signal’s gain within a specific frequency
range. Used for enhancing sound on stage.
Features:
03.2
HELICOPTER MOTOR
DECALCIFIER MODULE
This is a spare electric motor with gearwheel
for the helicopter (GB824).
Dimensions:
32mm length (excluding the shaft)
20.5mm width x 15.5mm height
Shaft: 2mm diameter x 7mm length
Weight: 33g
ORDER CODE: AC605
This module is used to prevent calcification
and corrosion in water pipes like inside boilers and washing machines. It is not, in any
way, harmful to the environment. It does not
use any chemicals and its operation is based
on physical-induction of magnetic fields. It is
HELICOPTER WING SET
easy to mount and does not require intervention into water piping.
Specifications:
Oscillating Frequency of Magnetic Field:
2KHz
Means of Field Transmission:
2 cables are coiled up helically around
the water pipe (10 windings per coil)
This is a spare set of rotor wings for the heliORDER CODE: GB794
copter (GB824). The set consists of a large,
horizontally mounted main rotor and small,
ELECTRONIC UNDERGROUND
vertically mounted tail rotor.
RODENT PEST REPELLENT
Dimensions:
Main Rotor: 205 x 370mm
Tail Rotor: 98mm longest dimension
ORDER CODE: AC606
HOME AND GARDEN
IN / OUT THERMOMETER WITH MIN.
This waterproof module emits powerful seis/ MAX. MEMORY
mic oscillations (vibrations) underground.
These oscillations are generated at a rapid
rate. This module should be buried 10 30cm deep, preferably close to the animal’s
(mole or similar rodent) tunnel. The connecting cable between the module and its power
supply should also be buried.
Specifications:
Supply Voltage: 9Vdc max.
Effected Area: 1000m² max.
ORDER CODE: GB778
temperature / voltage
External waterproof temperature sensor
Ice alert
Digital voltage meter as car battery monitor,
and charging level monitor
Analogue car battery level analyser icon
from empty to full
Voltage guard function: green LED flashes
when battery level is too low or high
Specifications:
Power Supply: 1 x 1.5V AAA cell (not incl.)
12V car plug is included for LED backlight
ORDER CODE: AB015
MOTORCYCLE INTERCOM
This motorcycle intercom is of excellent
quality and light weight. It has the most
advanced design amongst those in its class.
It is used between the motor-cyclist and one
passenger on the same motor cycle. Wires
are used to interconnect all the different
parts of this intercom system.
Specifications:
Power Supply : 2 x 1.5V AAA-cells (not incl.)
Signal-to-Noise Ratio: more than 60 dB
Output Signal Level: 150 mV
Frequency Response : 20 - 60000Hz ± 3dB
Volume Control and Auxiliary Audio Input
Input Circuit: 62dB ± 1dB (< 2.2Kohm unbalanced)
Output Earphone: 32 Ohm / 300mW
Dimensions of Control Unit:
63x56x25mm
Dimensions of Earphone + Microphone:
78x55x22mm
Weight: 40g
ORDER CODE: FB096
RODENT-DETERRENT FOR THE
MOTOR VEHICLE
CAR AND
MOTORCYCLE
Features:
Digital Thermometer -50ºC to +70ºC
Dual display: indoor / outdoor temperature
Min. / max. temperature memory
Mountable on a wall or placed on a table
External waterproof temperature sensor
with extremely thin cable allows a user to
shut the the window against the cable.
Specifications:
Power Supply: 1 x 1.5V AAA cell (included)
LCD size: 39 x 24mm
Cable length: 3m
ORDER CODE: AB016
IN / OUT THERMOMETER WITH
DUAL DISPLAY, BACKLIGHT AND
BATTERY TESTER
Features:
Digital Thermometer -50ºC to +70ºC and
Voltage meter / car battery analyser
Dual display: in / out temperature or
min. / max. temperature memory or
03.3
This module is a powerful ultrasonic soundgenerater. Humans do not hear it, but
rodents find it very irritating and try to avoid
it. In order to scare rodents away from the
motor vehicle the module should be mounted inside its engine compartment.
Specifications:
Supply Voltage 12 - 24Vdc
(without mounting straps)
ORDER CODE: GB757
03.4
SECURITY
entrances, drives etc.
Supply Current: 300 mA
Range: max. 5m
ORDER CODE: GB762
12Vdc powered (adapters are included)
(RCA) Audio/Video connectors and
A/C connections
Transmitter and Receiver both bave built-in,
directional antennas
MINI CAMERA B/W CCIR
Applications:
WITH MICROPHONE AND IR VISION
baby monitor
MINI CAMERA COLOUR CCD
entertainment equipment
9 - 12VDC
WITH MICROPHONE 9VDC
security systems
wireless audio transmissions
from TV to TV, VRC to TV, CCD camera
to monitor, or stereo set to another radio
This system works with all of your existing
audio or video components
Specifications:
Carrier frequency: 2.430 GHz
Transmission RF Power: 10mW max.
Range: 100m max. open space line of sight
30m max. indoors optimal conditions
A monochrome (black and white) CMOS
Video Input / Output: max. 1Vpp / 75ohm
A colour CMOS video camera built into a
video camera built into a miniature, bracket- miniature, bracketed metallic enclosure. It is Audio Input / Output: 0.8V nom. / 600 Ohm
ed metallic enclosure. It is ideal for short dis- ideal for security systems, video phones,
Audio Bandwidth: 50 - 17000Hz
tance viewing surveillance systems, video
industrial machine monitoring and toys.Each Audio / Video Connectors: RCA
phones, industrial machine monitoring and
RCA cables 2 x (EB550) (not included)
camera has a microphone, for audio monitoys as a very high resolution is not required toring, integrated into its enclosure.
for these applications. Each camera has 6 IR Electrical Connectors are supplied for:
Supply Current:
(Infra Red) LEDs, for night vision, and a
Transmitter: 110mA
DC Power Supply Input - 9V ‘PP3’ block batmicrophone, for audio monitoring, integrated tery clip,
Receiver: 180mA
into its enclosure.
Composite Video Signal Output - Yellow InElectrical Connectors are supplied for:
line RCA Phono Socket (female),
ORDER CODE: AB189
DC Power Supply Input - 9V ‘PP3’ block bat- Audio Sound Signal Output - White In-line
FLAT BLACK / WHITE
tery clip,
RCA Phono Socket (female),
CRT MONITOR
Composite Video Signal Output - Yellow InSpecifications:
line RCA Phono Socket (female),
Connects directly to standard video monitor
Audio Sound Signal Output - White In-line
or AV inputs of VCR
RCA Phono Socket (female),
Small size: 40x34x30mm
Specifications:
Supply Voltage: 9Vdc or 9V battery
Connects directly to standard video monitor Supply Current: 45mA max.
or AV inputs of VCR
On-chip auto exposure control
Small size: 40x34x30mm
Imager: 1/3 inch colour CCD sensor
Supply Voltage: 9 to 12Vdc or 9V battery
Pixels: 510(H) x 492(V) PAL
Electronic Shutter: 1/160 to 1/6000 sec
On-chip auto exposure control
Scanning: 2:1 interlace
Imager: 1/4 inch B/W CMOS sensor
Resolution: 380 TV lines
Pixels: 352(H) x 288(V) CCIR
Min illumination: 5 Lux at F1.4
Electronic Shutter: 1/160 to 1/6000 sec
Wide Viewing Angle: 72°
Scanning: 2:1 interlace
Video Output: 1Vpp (75 Ohm load)
Resolution: 240 TV lines
Weight: 85g
Min illumination: 0.1 Lux at F1.2
ORDER CODE: AB022
Wide Viewing Angle: 92°
2.43GHZ WIRELESS AUDIO / VIDEO
Video Output: 1Vpp (75 Ohm load)
Weight: 67g
TRANSMITTER / RECEIVER
This light and compact black / white monitor
ORDER CODE: AA420
uses a CRT (cathode ray tube). It comes
INFRA-RED SPOTLIGHT MODULE
without an enclosure.
FOR CCD CAMERAS
Features:
clear image
high resolution
internal synchronisation
Specifications:
4 inch B/W flat monitor
This is a single channel 2.430GHz wireless
(Radio transmission) audo / video transmitter Supply Current: 460mA
and receiver set. This device can be used
Power Consumption: < 6W
with all existing audio or video equipment
Composite Video Input: 1Vpp, 75 Ohm
with standard RCA connections. The unit
4 inch B/W cathode-ray tube:
operates on 12Vdc. An 12Vdc adapter is
Operating Voltage: 12V
supplied but you can also use an external
Operating Current: 75mA
12V-battery. The transmitter and receiver
With this IR (infra-red) spotlight CCD-camG2 Voltage: 300V
have built-in directional antennas. This pereras may recognize objects in complete
High Voltage: 6kV
darkness. Although IR light is invisible to the mits wireless transmission of audio and
human eye, CCD-cameras can see well with video signals over a distance of 100m in
Resolution: 350 TV lines (H)
open spaces or 30m indoors.
an infrared spotlight.
Available Pixels: > 80% (H) / > 80% (V)
It is perfect for inconspicuous observation of Features:
Brightness: 100cd/m³ max.
VIDEO CAMERA
MODULES
04.1
Temperature Range: -10°C to +55°C
External Dimensions: 204 x 105 x 35mm
Accessories: 6-pin and 4-pin cable, manual
ORDER CODE: AB142
Detection Range: 5 to 100cm
Dimensions:
ORDER CODE: GB503
IDS816 CONTROL PANEL
DUMMY SECURITY VIDEO CAMERA
B/W VIDEO QUAD SELECTOR
FOR 4 CAMERA INPUTS
Features:
This is a real-time, monochrome, quad video
selector that can be connected to up to 4
video cameras like (AA420) and (AB022).
It has 2 composite video outputs:
1 Quad video signal: combination of 4 inputs
(this signal can be used to view all 4 video
inputs simultaneously on 1 screen)
1 Sequential, every 3 sec., switching signal
(the device periodically selects 1 of the 4
input signals, 1 at a time; full-screen view)
The gain of each video input can be adjusted independently.
Specifications:
Supply Voltage: 12Vdc ±10%
Refresh Rate: 25 frames per second
Resolution: 720 x 576 pixels CCIR
380 TV lines
Monochrome: 256 grey shades
Video Inputs: composite video camera signal
4 x inputs 1Vpp 75 Ohm BNC connections
Video Outputs: 1 quad and 1 switching
composite video 1Vpp 75 Ohm BNC
Weight: 1.5kg
Five Adapters: BNC Plug to RCA Socket
5 x (EB430) for 4 inputs and 1 output
ORDER CODE: AB244
This is a dummy CCTV system camera that
looks very realistic. It can be used as a thief
and trespasser deterrent. The dummy can
also be used with your existing security system for additional protection. It is creamcoloured, has a life like lens and flashing red
LED to attract attention. A mounting bracket
and screws are included.
Power Supply: 4 x ’AA’ 1.5V cells (included)
ORDER CODE: FB404
HOME AND BUSINESS
SECURITY SYSTEMS
IDS805 CONTROL PANEL
FAKE
SECURITY CAMERAS
FAKE SECURITY CAMERA
WITH MOTION
This is a very realistic looking fake security
camera. It helps prevent and deter suspicious activity when placed in a survey area
like shops and at building entrances. It
appears to work like an actual security camera. It has a built in motion sensor that activates a red LED and rotates it from side to
side (motorised pan movement) at its base
that is connected to a mounting bracket. No
wiring needed. It has a on/off power switch.
Mounting screws are included.
Specifications:
Power Supply: 3 x AA 1.5V cells (not included).
The IDS805 Control Panel is a versatile,
state of the art, microprocessor based, 8
zone alarm panel. It is manufactured to the
highest specification and will provide many
years of service if it is installed correctly and
maintained. Most features are optional and
may be programmed either directly through
the keypad or via the telephone system,
using the IDS download software and appropriate modem. The IDS805 consists of an
IDS keypad and control panel. The IDS805
electronic control panel is built into a metal
cabinet that should be mounted indoors. The
metal cabinet has enough space to also take
a transformer (code: AA733) (not included)
and stand-by battery (not included) (code:
RB008). There are 8 programmable burglary
zones, appropriate outputs for siren and auxiliary power and 5 outputs that may be programmed to perform various trigger/switching functions. It has a built in telephone
dialer. For correct operation the IDS805
requires a transformer / battery combination,
sensors and signaling devices.
ORDER CODE: FB477
04.2
The IDS816 Control Panel is a versatile,
state of the art, microprocessor based, 8
zone alarm panel. It is intended to be used
for surveying up to 16 burglary zones. The
number of zones can be doubled by using
the zone doubling method that requires two
different end-of-line resistors per zone. The
recommended, easier way of doubling the
number of zones is by connecting one 8
zone expander module, (AC010) (not included), to the IDS816 Control Panel.
It is manufactured to the highest specification and will provide many years of service if
it is installed correctly and maintained. Most
features are optional and may be programmed either directly through the keypad
or via the telephone system, using the IDS
download software and appropriate modem.
Together with the 8 programmable burglary
zones there are also a dedicated panic zone,
monitored siren output, auxiliary power outputs and 5 programmable outputs which may
be programmed to perform various
trigger/switching functions.
The IDS816 electronic control panel is built
into a metal cabinet that should be mounted
indoors. It has a built in telephone dialer. For
correct operation the IDS816 requires a
transformer / battery combination, keypad,
sensors and signaling devices.
The metal cabinet has enough space to also
take a transformer (AA733) and one
12V 7Ah lead acid stand-by battery (RB008)
IDS 16 zone digital keypad (AC009)
IDS 8 zone expander module (AC010)
suitable sensors and signaling devices.
ORDER CODE: AC008
IDS 16 ZONE DIGITAL KEYPAD
This is an electronic keypad that can only be
used together with the IDS816 Alarm Control
Panel (AC008). It communicates digitally via
2 wires with the IDS816 Control Panel. It
also receives its power from the IDS816
Control Panel via another 2 wires. It can be
connected to the IDS816 Control Panel with
4 core signal/alarm cable (TB004). Please
note that the IDS816 Control Panel will support up to 8 keypads.
ORDER CODE: AC009
IDS 8 ZONE EXPANDER MODULE
Supply Current: 100mA for the module.
Key Tag Dimensions: 35 mm diameter
Module Dimensions: 75 x 60 x 22mm
ORDER CODE: GB755
MINI-FENCE
HIGH-VOLTAGE GENERATOR
SPARE KEY FOR
ELECTRONIC KEY MODULE
This is an electronic 8 zone expander module that can only be used together with the
IDS816 Alarm Control Panel (AC008). It is
used to add another 8 zone connections to
the existing 8 zone connections of the
IDS816 Control Panel. It is powered by the
IDS816 Control Panel. Please note that the
IDS816 Control Panel will support only one
expander module.
ORDER CODE: AC010
No battery is required!
Electronic Key Tag Dimensions: 35mm dia.
ORDER CODE: GB791
MULTI-PURPOSE
SECURITY KEYPAD
ELECTRONIC CARD SWITCH
MODULE
This device generates 2kVolt low power
pulses. It is not meant to deter burglars. it is
useful though for keeping small animals
bound or out of a garden with electric-fencing around it.
ORDER CODE: GB776
CAR / MOTOR CYCLE
SECURITY SYSTEMS
ULTRASONIC CAR ALARM
WITH REMOTE CONTROL 12VDC
This device optically reads a the coding on a
card and switches a relay if the coding is
correct. It can be used by a selected few to
switch devices, machines, alarm systems
etc. 3 Identical cards are included and their
coding can be changed.
Relay Output: max. 1A / 48V (SPST)
ORDER CODE: GB795
ELECTRONIC KEY MODULE 12VDC
When holding the electronic key tag in front
of the detection module (distance 5 - 15
mm), a relay switches on. Application: noncontact door opener to switch appliances
etc. You may hide the detection module
behind a non-metallic nameplate or a door
glass pane. Ideally only "insiders" know
where you have to hold the key tag to open
the door.
The key tag does not require any battery!
One key tag is supplied with the module.
You may buy a spare key tag (GB791).
Technical Specifications:
This is a self-contained, dual output keypad
for security control applications. It makes
use of microprocessor technology. It has
EEPROM memory that protects the stored
data in case of a power failure. User settings
and entry codes are stored in this memory.
There is one master code and two user entry
codes: code1 and code2. Over 100 million
combinations are possible for the codes.
User code 1 can be set to act as a duress
code that activates the duress output. This
output is connected to an alarm system or a
telephone dialler. Two separate relay outputs. Audible key operation. Built-in tamper
switch. A plastic mounting box is supplied for
easy installation onto a flat surface.
Specifications:
Keypad: 3 x 4 push-button keys
Code Combinations: 111111100 possibilities
Two Relay Outputs:
output 1: 5 Amp max.
output 2: 1 Amp max. with N.C., N.O. and
COM. dry contacts, 30Vdc max.
Duress Output: NPN transistor with open
collector output that switches to ground (-)
when activated, 100mA / 25Vdc max.
Available Codes:
User 1 & 2, Super User, Master, Duress and
Accelerated codes
Weight: ± 230g
ORDER CODE: AB379
04.3
The alarm features the following:
1) Two Key ring transmitters - each transmitter has 1 button (can be coded by user)
2) Alarm status:
The cars indicators will flash indicating when
the alarm is turned on or off. If the alarm is
turned on and any of the doors are left open,
the siren will beep until the door is closed.
The alarm system will then arm itself.
3) Two point immobilizer:
The immobilizer circuit will self arm 18 seconds after the vehicles ignition has been
turned off. There are two normally open contacts available rated at 20 Amps 12V DC.
4) Alarm activation:
Ultrasonic movement (ultrasonic sensor is
adjustable on the head). Door switches
(either positive or negative door switches
can be used). Panic switch (if the transmitter
button is pressed for longer than 2 seconds
the alarm activates)
5) Output for optional door lock control interface (FB095).
6) Battery backup:
A 9V battery can be connected (not supplied)
ORDER CODE: TB016
CAR ALARM
WITH REMOTE CONTROL
This compact all-in-one car alarm provides
optimal protection. Four alarm channels (one
optional). Built-in siren with current sensing.
Output for optional door lock control interface (FB095). Multifunctional transmitter for
remote control. Built-in adjustable shock sensor with pre-alarm option. Ignition cutoff and
audible and visual arming/disarming signal.
Specifications:
Operating Voltage : 8 - 16Vdc
Power consumption : arm/disarm : 100mA;
stand-by :10mA; alarm : 450mA
Back-up Battery: 9V (EB160) (not included)
Relay output (ignition cutoff) : 15A/120Vac
Operating range : 16 - 40m
Optional second transmitter (AB183)
Alarm cycle : 30 seconds
Passive re-arming timer : 30 seconds
Self-learning code system sequences :
118098 codes/alarm group ; 472392 different
codes
Output sound level : 110dB / 1m
Impact sensor : electronic shock sensor
Vibration : 6G repetitive
Alarm activation delay : 3 seconds
Trigger input : minus 0.6Vdc drop
Ground output : 500mA max
Transmitting frequency : 433.92 MHz
Flashing light output: two 5A outputs (fused)
Main fuse (red wire) : 5A
Dimensions : 115x115x75mm
Wiring harness : 2.5m
ORDER CODE: FB085
REMOTE CAR ALARM (2 WIRE)
ORDER CODE: FB086
SPARE 2 CHANNEL TRANSMITTER
FOR REMOTE CAR ALARM
ing of the door lock motor(s).
Complete with connections
Specifications:
Supply Voltage : 12Vdc
ORDER CODE: FB095
MOTOR
FOR CENTRAL DOOR LOCK
This 2 channel key-ring transmitter is used
with (FB085) and (FB086)
Specifications:
2 channels
keychain housing
Power Supply: 12V battery (DB247) (incl.)
Transmission Frequency: 433MHz
ORDER CODE: AB183
IGNITION CUT-OFF SYSTEM
WITH KEYPAD
This is an actuator motor that can be used in
a door locking system. You require 1 per
door for every door that you wish to automatically lock and unlock.
ORDER CODE: FB094
MOTOR FOR CENTRAL
DOOR LOCK WITH SWITCH
This set consists of an illuminated keyboard
and a relay. Can be disarmed with a personal 4-digit code. Special key for disarming the
system. The system is armed automatically
15 seconds after the engine has been shut
down. Valet function for protection at your
service station. A red flashing LED indicates
that the alarm is armed.
Specifications:
Supply Voltage : 10.5 - 14Vdc
Power Consumption : Arm/disarm : 8mA;
Stand-by : 44mA; Alarm : 140mA
Relay output : 12V / 20A
Passive arming timer : 15 seconds
ORDER CODE: FB087
POWER DOOR LOCK INTERFACE
This is an actuator motor that can be used in
a door locking system. The motor comes
with a built-in switch and wire connections:
Normally Closed (locked position) (brown)
Normally Open (unlocked position) (white)
Common (black)
Motor Power (blue and green)
ORDER CODE: FB093
CENTRAL DOOR LOCKING
SYSTEM WITH 4 MOTORS
This car alarm system is very easy to install
and is offered at a competitive price. Built-in
shock sensor (with pre-alarm mode) and
voltage drop detector. Auxiliary ground trigger input.
Please note that this alarm system does not
have any output for central door locking.
Specifications:
Operating Voltage: 9 - 16Vdc
Power consumption: stand-by 10mA,
alarm 650mA
Operating range: 6 - 40m
Optional second transmitter (AB183)
Alarm cycle: 60 seconds
Self-learning Code System: 472392 different
codes
Output sound level: 120dB / 1m
Impact sensor: fully electronic piezo shock
sensor
Vibration: 6G repetitive
Alarm activation delay: 3 seconds
Trigger input: minus 0.6VDC drop
Cable length: 1.3m
This central unit drives one or more door
lock motors: code (FB093) and (FB094).
Features:
Can be activated by an alarm system or
remote control receiver, (both not included),
using a single input connection. This input
has to be pulled active low to ground, (connected to the negative supply rail), to activate and unlock the door(s).
Once the input is disconnected or pulled
high, (connected to 12V supply rail), the door
lock motor(s) will return to the locked position again.
Please note that when the wires of the door
lock motor are swopped the door will unlock
instead of lock and the other way round.
Adjustable pulse cycle to prevent overheat-
04.4
Features:
Complete 4-door set that includes:
1 master motor with switch (FB093) for
use in the driver’s door and
3 slave actuator motors 3 x (FB094)
1 door lock interface
adjustable positioning hardware for easy
and safe installation
After correct installation:
When the driver’s door lock knob is pulled
up (unlocked) or pushed down (locked) the
other 3 door locks automatically do the
same. The 4 door locks can also be controlled by an alarm system or remote control
receiver, (both not included). This is done by
using 2 control wires, (25: white and brown),
that will toggle the door locks between a
locked state and unlocked state. Every time
these wires are reconnected the door locks
will change state.
Specifications:
Actuator motor Force: push / pull 6kg
Fits any model
Water-resistant
ORDER CODE: AB071
ORDER CODE: FB088
MORTICE LATCH FOR STRIKE
MOTOR CYCLE ALARM MODULE
ULTRASONIC DETECTOR
Detects glass breakage or other movements
within the car.
Features:
Separate detectors
Adjustable sensitivity
Easy installation
LED indication
Specifications:
Voltage Supply : 12Vdc
Wire length : ± 2m
(detectors : Ø12 x 20mm)
ORDER CODE: FB089
This device automatically switches on a
series connected horn or siren when the
motorbike is moved (tilted) from a parking
position to any other. It is waterproof and
shakeproof. It can also be used to protect
any other objects, which should not be
moved.
Supply Voltage: no need of own operating
voltage as it is just a switching device
(without mounting straps)
ORDER CODE: GB761
STANDARD MORTICE STRIKE
12 VAC
SWITCHES AND LOCKS
PANIC PUSH BUTTON
MOTOR CYCLE ALARM - REMOTE
A rectangular white plastic push-button with
with the word ’EMERGENCY’ printed in red
onto it. It has three screw terminals: N.O.,
N.C. and COM. It may be used to manually
trigger an alarm system.
ORDER CODE: HB015
GATE PUSH BUTTON
This alarm system is equipped with the latest
in security electronics. A multifunctional
transmitter with self-learning code is
enclosed. The indicators flash when the system is armed or disarmed. Ignition lockout is
in effect when the alarm is ON. Built-in
adjustable shock sensor with pre-alarm,
extra protection is possible for the boot and
for accessories. The compact central unit is
easy to install on a dry spot.
Specifications:
Operating Voltage : 9 - 15Vdc
Power consumption : arm/disarm : 70mA;
stand-by : 6mA; alarm : 40mA
Relay output (ignition cut-off) : 15A/120Vac
Operating range : 16 - 40m
Alarm cycle : 30 seconds
Passive rearming timer : 15 seconds
Self-learning code system : 472392 different
codes
Output sound level : 110dB / 1m
Impact sensor : fully electronic piezo shock
sensor
Vibration : 6G repetitive
Alarm activation delay : 3 seconds
Transmitting frequency : 433.92MHz
Wiring harness : 1.5m
Output indicator lights : 10A
Main fuse (red wire) : 3A
Narrow style latch for aluminum doors with
double cylinders. It should be used together
with the mortice strike, (PB127), where there
is restricted access on both sides of the
door. It has three identical keys that are
required for locking and unlocking the door
especially during a power failure when there
is no power for the mortice strike (not included). Dimensions: 23 x 130mm, 25mm depth.
Length of brass Lock: 54mm
ORDER CODE: PB126
This is a robust general purpose electric
strike suitable for installation in metal and
wooden frames. Also used in custom metal
housing for grill gates.
Specifications:
Power Supply: 12 Vac / 0.5A transformer
PB163, EB913 or at best PB161 (not incl.)
Resistance of Electromagnet: 30 Ohm
Dimensions: 25 x 160mm, 30mm depth
ORDER CODE: PB127
SIRENS AND
WARNING LIGHTS
MICRO PIEZO SIREN 6-14VDC
A rectangular white plastic push-button with
a picture of a gate printed in black onto it. It
has three screw terminals: N.O., N.C. and
COM. It can be used to open security gates
using Standard Mortise Strike (PB127).
ORDER CODE: GB150
04.5
A powerful, micro, electronic, piezo siren. It
has a black, ABS plastic enclosure. It has 2
wires and 48.5mm spaced mounting holes.
Specifications:
Supply Current: 170mA at 12Vdc
Oscillating Frequency: 4.5kHz
Sound Pressure: 115dBA at 1m
ORDER CODE: AB421
ELECTRONIC MINI SIREN
6 - 12VDC
A mini electronic alarm siren on a swivel
bracket with 22mm spaced mounting holes
Supply Current: 140mA at 12Vdc
Frequency Range: 1.5 - 3.5kHz
Weight: 47g
ORDER CODE: EB222
ELECTRONIC PIEZO SIREN 12 VDC
ELECTRONIC SIREN 6 TONE
20 WATT 12VDC
A compact electronic alarm siren, self-contained in a plastic housing with swivel
mounting. (Up to 15 Watt sound output select from 6 different sounds). Features low
current drain.
Voltage: 12VDC
ORDER CODE: FB453
OUTDOOR SIREN WITH
STROBE LIGHT 12VDC
FLASHING LIGHT RED LENS
12VDC (GLOBE)
Ideally suited for connecting to your home
alarm system. Should your alarm be triggered, the light will flash and draw extra
attention. The light comes in a splash proof
housing and has a built in flasher unit.
Specifications:
Dimensions: 78mm diameter, 45mm height
ORDER CODE: FB402
STROBE LIGHT RED LENS 12V
(XENON)
A very piercing two tone siren in a tough
ivory coloured plastic housing. High sound
pressure level using 2 piezo-elements.
Connection to the unit is with two colour
coded leads (red +, black -). Two mounting
lugs spaced 98mm apart are molded into the
case which allows the unit to be fixed to a
surface using M3 size screws.
Supply voltage: 6 to 15V DC
Operating voltage: 12V DC
Current usage at 12V DC: 120mA
Sound Pressure: 97dB
Frequency Range: 1.5 - 3.1kHz
Overall dimensions: 84x54x32mm
Leads: Approximately 130mm long
ORDER CODE: PB042
ELECTRONIC SIREN
12 VDC 15 WATT
A compact electronic alarm siren with red
flashing light built into it. The siren and light
are activated simultaneously with a 12Vdc
trigger input from an alarm panel or by cutting the power or by the hidden tamper
switch. It has a built-in, rechargeable backup battery with battery recharger. It requires
a permanent DC supply.
Specifications:
Supply Current:
Siren: 200mA
Strobe Light: 250mA
Siren Output: 120dB
Strobe Intensity: 25 lumen
ORDER CODE: AB017
FLASHING LIGHT GREEN LENS
12VDC (GLOBE)
A compact electronic alarm siren, self-contained in a black plastic housing with an
adjustable swivel mounting.
Specifications:
Supply Current: 1.3A at 12Vdc
Power Consumption: 15W
Type of Sound: periodic yelping sound
Case: Black ABS Plastic with metal bracket
Dimensions: 100mm x 110mm diameter.
ORDER CODE: XB009
Ideally suited for connecting to your home
alarm system. Should your alarm be triggered, the light will flash and draw extra
attention. The light comes in a splash proof
housing and has a built in flasher unit.
Specifications:
ORDER CODE: FB403
04.6
This flashing xenon light is ideally suited for
connecting to the output of your home alarm
system. This light starts to flash when powered by your triggered alarm. The flashing of
the light draws extra attention and indicates
where the alarm is being made. The enclosure is water proof and has two power leads.
Specifications:
ORDER CODE: SB034
STROBE LIGHT BLUE LENS 12VDC
(XENON)
Specifications:
Dimensions: 70mm diameter, 46mm heigh
ORDER CODE: GB427
STROBE LIGHT RED LENS 12 VDC
(XENON)
DOOR-REED SWITCH
AND MAGNET NC
A surface mounting reed switch and magnet
in similar white plastic moldings. Contacts
This flashing xenon light is ideally suited for are NC (normally closed) when the reed
connecting to the output of your home alarm switch and magnet are in close proximity to
system. This light starts to flash when poweach other. This is the preferred door-reed
ered by your triggered alarm. The flashing of switch for security systems. It can be used to
the light draws extra attention and indicates activate an alarm system when a door is
where the alarm is being made. The encloopened. Attached to surfaces by either dousure is water proof and has two power leads. ble-sided tape or screws (not included).
Specifications:
Specifications:
Operating Gap (for Closed Switch Contacts):
0 to 18mm
(between the magnet and reed switch that
are mounted onto non-metallic surfaces)
ORDER CODE: QB060
Reed Switch Contact Rating:
STROBE LIGHT AMBER LENS
max. 500mA / 100V
12VDC (XENON)
Dimensions (both parts): 55 x 12 x 13mm
Fixing centers: 54.5mm using M3 screws
ORDER CODE: MB049
ELECTRONIC SHOCK SENSOR
The sensor detects shocks, for example, collisions, break-ins, car towage, etc. It can be
installed anywhere in your vehicle. It has
adjustable sensitivity and LED indication.
ORDER CODE: FB090
INFRA-RED LIGHT BARRIER
MODULAR 4M
DOOR-REED SWITCH
AND MAGNET NO
Specifications:
ORDER CODE: GB556
SECURITY SENSORS
FLANGED, ROUND
REED SWITCH NC
A surface mounting reed switch and magnet
in similar white plastic moldings. Contacts
are NO (normally open) when the reed
switch and magnet are in close proximity to
each other. Can be used to activate an
alarm system when a door is opened.
Attached to surface by either double-sided
tape or screws (not included).
Specifications:
Operating Gap (for open switch contacts):
0 to 18mm
(between the magnet and reed switch that
are mounted onto non-metallic surfaces)
Reed Switch Contact Rating:
max. 250mA / 30V
Dimensions (both parts): 55 x 12 x 13mm
Fixing centers: 54.5mm using M3 screws
ORDER CODE: MB163
Already assembled IR (infra-red) light barrier
system consisting of separate IR transmitter
and receiver units. Range of 4m. When the
single IR beam, between the two units, is
interrupted, like when a person walks
through it, a relay switches. The relay output
is in the IR receiver unit and its on-time is
adjustable between 0.5 and 7 sec.
With this system it is possible to switch a
counting device or a bell for the on-time of
the relay.
Specifications:
IR Beam Range: 4m
Supply Current: max. 100mA (each unit)
Output Relay: max. 3A / 25V (SPST)
Transmitter Dimensions: 40 x 25 x 21mm
(with mounting straps)
Receiver Dimensions: 91 x 40 x 47mm
(with mounting straps)
A tilted IR reflector mirror is recommended if
the IR beams path should be deviated.
ORDER CODE: GB797
INFRA-RED SINGLE BEAM
LIGHT BARRIER 30M
VIBRATION DETECTOR
Recessable, flanged, round, in-line reed
switch with cylindrical permanent magnet.
Ideal for flush mounting in door and window
frames.
Specifications:
Normally Closed Switch Contacts
(when the two parts are in close proximity)
Operating Gap Distance: 20mm max.
Dimensions:
Front Mounting Disc: 19mm dia. x 2mm thick
Cylindrical Part: 9mm dia. x 32mm length
Mounting Hole Diameter: 9.5mm
This sensor is attached to a window and will
ORDER CODE: AB414
detect any vibrations that are caused by a
burglar trying to open or break the window.
ORDER CODE: AA483
04.7
Already constructed IR (infra-red) light barrier with separate transmitter and receiver.
This device can be used to detect the crossing or intrusion at a gate or door entrance.
The relay in the receiver switches when the
IR beam across the entrance is interrupted.
Separation range is 30 meters. Equipment
has an on-indicator LED at the receiver for
function indication and to assist when aligning and mounting the transmitter.
Supply Voltage for Transmitter:
9Vdc (approx. 60mA)
Supply Voltage for Receiver:
12Vdc (100mA max.)
Relay Switch Output at Receiver:
1 x change over (SPDT), max. 3A / 24V
Range: 30m
Ray of light:
Single IR (infra-red) beam that is invisible
to the human eye.
Optics: 2 clear 5mm IR LEDs at transmitter
1 clear 16mm dia. lens at receiver
Receiver Dimensions: 72 x 50 x 41mm
Transmitter Dimensions: 30 x 25 x 15mm
A tilted IR reflector mirror is recommended if
the IR beams path should be deviated.
ORDER CODE: GB748
INFRA-RED SINGLE BEAM 40M
mum time duration. This minimum time duraINFRA-RED REFLECTOR MIRROR
tion is called the obstruction time. The
obstruction time is adjustable.
The receiver contains a voltage monitor jack.
Connect any DC volt meter (not included) to
the monitor jack. Use the voltage reading to
help you align the transmitter and receiver to
the same optical axis.
The relay has three connections: normally
open, normally closed and common. The
transmitter and receiver each have a mounting bracket and built-in tamper switch.
This IR (infra-red) reflector may be used with
Specifications:
IR light barriers.
Dimensions: 51 x 69mm, 8mm thick
Supply Current:
ORDER CODE: GB809
Transmitter: 8mA at 12V
Receiver: 30mA at 12V
PASSIVE INFRA-RED DETECTOR
Maximum Range: 30m
(PARADOX)
Adjustable Obstruction Time: 50 - 700 msec.
Relay Switch Contact Rating: 0.5A / 30Vdc
Dimensions per unit: 82 x 171 x 77mm
ORDER CODE: AC493
SUNWAVE DUAL IR BEAM 40M
This infra-red beam security sensor consists
of two units: a transmitter and a receiver.
The units should be mounted on the opposite sides of an entrance. It can be used
both indoors and outdoors. The transmitter
sends a modulated infra-red light beam to
the receiver. The receiver contains a relay
switch. The relay is switched on, (normal
state), only while the receiver detects the
infra-red beam. The relay has three connections: normally open, normally closed and
common.
Specifications:
Supply Current:
Maximum Range: 40m
Relay Switch Contact Rating: 5A / 220Vac
ORDER CODE: AA703
The Pro Plus detector has been redesigned
with improved Auto Pulse Signal Processing.
Sensor Type Dual Element Infrared
Operating Temperature -10 C to +50 C
This is a security sensor that detects with
Power input 9 to 16Vdc / Vcc 31mA max
two infra-red light beams. It consists of two
Coverage 110 Viewing angle (10.6m x
units: a transmitter and a receiver. The units
10.6m) at an installation height of (2m to
should be mounted on the opposite sides of
2.7m)
an entrance. It can be used both indoors and
Auto Pulse Signal Processing
outdoors. The system features two mechaAutomatic Temperature Compensation
nisms that help to prevent false triggering.
RF Metal Shield
The system will only be triggered if:
ORDER CODE: PB031
1) both beams are interrupted simultaneously and
PASSIVE INFRA-RED MOTION
2) the interruption endures for a certain miniDETECTOR 230VAC WITH
mum time duration. This minimum time dura230V / 5A RELAY CONTACTS
tion is called the obstruction time. The
obstruction time is adjustable.
The receiver contains a voltage monitor jack.
Connect any DC volt meter (not included) to
SUNWAVE DUAL IR BEAM 30M
the monitor jack. Use the voltage reading to
help you align the transmitter and receiver to
the same optical axis.
The relay has three connections: normally
open, normally closed and common. The
transmitter and receiver each have a mounting bracket and built-in tamper switch.
Specifications:
Supply Current:
Features:
This passive infrared detector is suitable for
Maximum Range: 40m
both indoor and outdoor use
Adjustable Obstruction Time: 50 - 700 msec. Detection: 110° - max. 15m
Relay Switch Contact Rating: 0.5A / 30Vdc
Switching Capacity: 1000W / 230Vac (relay
This is a security sensor that detects with
output)
two infra-red light beams. It consists of two
ORDER CODE: AC887
Adjustable: sensitivity, detection distance
units: a transmitter and a receiver. The units
and switching duration
should be mounted on the opposite sides of
Specifications:
an entrance. It can be used both indoors and
Power Supply: 230Vac / 50Hz
outdoors. The system features two mechaOutput Voltage: = supply voltage 230Vac
nisms that help to prevent false triggering.
Output Power Rating: 1000W / 5A
The system will only be triggered if:
Warm-up Time: about 30 sec.
1) both beams are interrupted simultaneousAdjustable Light Sensitivity: for night / day
ly and
differentiation.
2) the interruption endures for a certain mini-
04.8
Detection Range: 15 m (at 20°C)
Detection Angle: 110°
Adjustable Detection Angle: ± 40°
Adjustable Timer Duration: 5 to 320 sec.
ORDER CODE: AB019
PIR WALL SWITCH
tive switching device. Its output relay-switch
is switched on when the light shining onto its
light-sensor is brighter than the pre-set
value. The relay-switch is otherwise switched
off. Not suitable for outdoor use.
Specifications:
Output Relay: 1 pole 2 way (SPDT), it has
COM., N.O. and N.C. wire connections
ORDER CODE: GB775
DAYLIGHT TIME SWITCH
STANDARD 230VAC 10A
This passive infrared sensor reacts to
changes in temperature emitted by objects
or persons passing through its detection
area. This sensor is meant to be connected
in series with a 230Vac incandescent light
bulb inside the home. The light turns on
automatically when the this sensor senses a
person entering into a room. The light turns
off automatically after the person leaves the
room. The automatic lighting drastically
saves money on the electricity bill as it turns
the light on only when it is needed. The
override feature allows the wall switch to
perform the function of an ordinary light
switch, as when the light switch is in the ón´
position, the light will remain on for as long
as the switch is in the ÓN´ position. Ideal for
Living Rooms, Staircases, Entrance Halls,
Garages, etc.
Feature:
-Adjustable preset Auto-Stop time
-Built-in Photocell adjusts the time for the
sensor to activate
-Switch controls on/off with Manual override
-Adjustable sensing angle 110 degrees
-Detecting distance of 9m at a height 5 - 6m
Specifications:
Power Requirements 220V - 240V AC 50Hz
Lighting Load: between 30 and 300 Watts
Please note: only use incandescent Lights
Fuse Rating 1.6A / 250V
Detection Angle 110 degrees
Detection Range up to 9m in length
Mounting Height 1 - 1.8m approximately
Power consumption Standby current 30mA
max, operating current 35mA max
Switching Function Auto, off and manual
override
Warming up time About 1 minute
Adjustable Time Delay: 8 sec. to 9 min.
Adjustable Light Sensitivity: 0 to 1000Lux
Manual override Switch is toggled back to
Ón´ from Óff´ within 2 seconds
ORDER CODE: FB451
The day/night switch comes complete with a
rear entry 20mm treaded adapter for easy
installation onto conduit. A unique snap on
mounting bracket for wall/pole mounting is
included. The switch should be so located
that only daylight will influence it (i.e. above
the lamp being switched). It is suitable for
outdoor use
Supply Voltage: 230VAC
Max. Current: 10Amp
ORDER CODE: EB214
Remote Control Receiver (FB483). The code
is set by means of a single 12-way dip
switch.
Supply Voltage: 12V alkaline battery (23A)
(DB247) (battery is included)
Maximum Dissipation Current: 20mA
Enclosure dimensions: 14x32x66mm
ORDER CODE: FB478
SENTRY UNIVERSAL REMOTE
CONTROL TRANSMITTER
3 CHANNELS
This 3-channel Sentry Universal keyring
transmitter is used with the Sentry Universal
Remote Control Receiver and Sentry French
is set by means of two 6-way dip switches.
Enclosure dimensions: 14x32x66mm
ORDER CODE: FB479
SENTRY FRENCH REMOTE
CONTROL TRANSMITTER
1 CHANNEL
TWILIGHT SWITCH
MODULE 230VAC
This single channel Sentry French keyring
transmitter is used with the Sentry French
This electronic twilight switch connects a
is set by means of a single 12-way dip
230Vac lamp automatically by means of an
switch.
installed relay at nightfall and off again at
daybreak. The module may also work the
other way round: on at daybreak and off at
nightfall. The module has a built in switching Maximum Dissipation Current: 10mA
delay to prevent immediate reaction to short Operating Frequency: 403MHz
lightning like headlights of a passing car. It is Enclosure dimensions: 14 x 32 x 66mm
ORDER CODE: FB481
suitable for outdoor use.
Specifications:
CONTROL TRANSMITTER
3 CHANNELS
Output Relay: (SPDT), max. 3A / 230Vac
Switching Delay: 15 - 45 sec.
Dimensions: 70 x 60 x 22mm (without
mounting flanges)
ORDER CODE: GB749
REMOTE CONTROLS
TWILIGHT SWITCH
MODULE 12VDC
SENTRY UNIVERSAL REMOTE
CONTROL TRANSMITTER
1 CHANNEL
This device can be used to switch on securi- This single channel Sentry Universal keyring
ty lights during night-time.It is a light-sensitransmitter is used with the Sentry French
04.9
This 3-channel Sentry French keyring transmitter is used with the Sentry French
is set by means of two 6-way dip switches.
Enclosure dimensions: 14 x 32 x 66mm
ORDER CODE: FB482
CONTROL RECEIVER 1 CHANNEL
This is the receiver unit that works with the
Sentry French keyring transmitters: (FB481)
and (FB482) and Sentry Universal keyring
transmitters: (FB478) and (FB479) to operate devices over a 10 to 30m distance. Ideal
to operate electrical gates, doors and alarm
systems. It is programmed to a specific
channel by pressing a single on-board push
button. It can be set to latching or non-latching mode using a single on-board jumper.
Enclosure dimensions: 29 x 66 x 89mm
ORDER CODE: FB483
2-CHANNEL RANDOM CODE
RF REMOTE TRANSMITTER
This 2-channel, RF, key holder transmitter is
an extra transmitter for the 2-Channel RF
Remote Control System (AB319).
This transmitter is also available in kit form
(AC916). It can also be used with the “2Channel RF Remote Receiver” kit (AC908).
Specifications:
(battery is supplied)
Two push-button switches, one per channel
Key holder housing
Generates unique 30-bit random code
The code can easily be changed
There are no jumpers used
There is a choice between ‘continuous’ or
‘burst’ transmitting
ORDER CODE: AB318
2-CHANNEL RF
REMOTE CONTROL SYSTEM
This receiver is also available in kit form
used with the Multitek Remote Control
(AC908). It can also be used with the “2Receivers (FB917), (FB918) and (FB919).
Channel RF Remote Tansmitter” kit (AC916). The code is set by means of a single 9-way
dip switch.
One transmitter and one receiver unit is sup- Supply Voltage: 12V alkaline battery (23A)
plied. The receiver also works with the 2(DB247) (battery is included)
Channel Random Code RF Remote
Transmitter (AB318). It is suitable for various Enclosure dimensions: 14.5mm x 37mm x
control applications:
82.5mm
light control, car alarm, opening the garage
door, front or back door to your home, etc... Transmission Range: 200m
ORDER CODE: FB915
Transmitter Specifications:
DYNO REMOTE CONTROL
TRANSMITTER
(not included)
Two push-button switches one per channel
3 CHANNELS 200M
Key holder housing
32-bit code generator
Codes: over 1.000.000.000 combinations
Optional Transmitter: (AB318)
This 3-channel Dyno keyring transmitter is
Receiver Specifications:
Power Supply: 9 - 12V DC or AC
Open Field Range: up to 30m max.
Can be programmed: up to 31 transmitters
Each channel has an unique 32-bit code
The code memory can be erased for safety
purposes
It is programmed to a specific channel by
pressing a single on-board push-button
Each output can be set for either pulse or
toggle operation
special function in pulse mode: press both
transmitter buttons simultaneously to
activate both the output relays
When an output is set for pulse operation it
will also have a turn off timer function
Selectable turn off times per output:
0.5, 5, 30 sec. and 1, 5, 15, 30, 60 minutes
It has two SPDT relay outputs, each with
COM, NO and NC: 3A max. contact rating
LED indicators for outputs and functions
ORDER CODE: AB319
MULTITEK REMOTE CONTROL
RECEIVER 1 CHANNEL
DYNO REMOTE CONTROL
TRANSMITTER
1 CHANNEL 200M
This single channel Dyno keyring transmitter
is used with the Multitek Remote Control
Receivers (FB917), (FB918) and (FB919).
The code is set by means of a single 9-way
dip switch.
Enclosure dimensions: 14.5 x 37 x 82.5mm
Transmission Range: 200m
ORDER CODE: FB914
DYNO REMOTE CONTROL
TRANSMITTER
2 CHANNELS 200M
This is a 2-channel, random code, RF
remote control system.
used with the Multitek Remote Control
Receivers (FB917), (FB918) and (FB919).
The code is set by means of a single 9-way
dip switch.
Enclosure dimensions: 14.5mm x 37mm x
82.5mm
Transmission Range: 200m
ORDER CODE: FB916
This 2-channel Dyno keyring transmitter is
04.10
This is a single channel receiver unit that
works with the Dyno keyring transmitters
(FB914), (FB915) and (FB916) to operate
devices over a maximum distance of 200m.
Ideal to operate electrical gates, doors and
alarm systems. It is programmed to a specific channel by pressing a single on-board
push button. It can be set to latching or nonlatching mode using a single on-board
jumper.
Maximum Dissipation Current: 50m
Enclosure dimensions: 29mmx87mmx87mm
ORDER CODE: FB917
RECEIVER 2 CHANNELS
SECURITY
COMMUNICATORS
INTERPHONE SYSTEM
WIRELESS REMOTE CHIME
This is a 2-channel receiver unit that works
with the Dyno keyring transmitters (FB914),
(FB915) and (FB916) to operate devices
over a maximum distance of 200m. Ideal to
operate electrical gates, doors and alarm
Maximum Current per Channel: 50mA
ORDER CODE: FB918
RECEIVER 3 CHANNELS
This intercom system consists of two identical ring-phones with a handset and call button each. When someone removes the
handset or pushes the call button on a
phone the other phone will ring. The ring
Features:
sounds like a telephone. The ringing will stop
It is easily installed and no wiring is required. when both handsets are removed. Both
This wireless doorbell may also be used for handsets should be put back when commuremote paging or as a panic switch.
nication is finished.
It has different ring tones: ding, ding-dong
and Westminster.
Power Consumption: 1W (when operating)
A digitally coded signal is used to prevent
Range: 300m, 2 core ripcord 3A (not incl.)
false triggering.
ORDER CODE: GB814
Specifications:
Range: 100m max.
Transmission frequency: 433.92MHz
Audio Power: 100dB
Power Supply:
Transmitter: 1 x 12V A23 battery (DB247)
(12V battery is included)
Receiver: 3 x 1.5V C cells
(not included)
ORDER CODE: AB012
DOOR PHONE
This is a 3-channel receiver unit that works
with the Dyno keyring transmitters (FB914),
(FB915) and (FB916) to operate devices
over a maximum distance of 200m. Ideal to
operate electrical gates, doors and alarm
Maximum Current per Channel: 50mA
ORDER CODE: FB919
This system consists of an outdoor station,
(doorbell, microphone and speaker), and
indoor station, (ring-phone, handset and
push button). When a visitor pushes the call
button on the outdoor station, at the door or
gate, the indoor station rings. The ring is a
gentle electronic chime bell sound. The host
removes the indoor stations handset and
communicates with the visitor and then puts
it back again. The push button on the phone
may be used if required.
Supply Voltage: 6Vdc or 4xAA 1.5V cells
Supply Current: 30mA talking, 150mA Ring
Range: 300m, 2 core ripcord 5A (not incl.)
ORDER CODE: GB812
04.11
04.12
TEST AND
MEASUREMENT
TOOLS
Compensation Range: 10 - 35pF
Cable Lenght: 1.2m
ORDER CODE: GB407
HPS10 HANDHELD SCOPE
PANEL OSCILLOSCOPE
OSCILLOSCOPES
OSCILLOSCOPE PROBE 60MHZ
Specifications (x1 setting):
Attenuation Ratio: 1:1
Bandwidth: DC - 15MHz
Signal Rise Time: 27ns
Input Impedance: 1M Ohm (oscilloscope)
Input Capacitance: 46pF + oscilloscope
input capacitance
Max. Input Voltage: 600V DC
Specifications: (x10 setting):
Signal Rise Time: 5.8ns
Input Capacitance: ±18pF
Max. Input Voltage: 600V DC
Compensation Range: 10 - 35pF
Cable Lenght: 1.2m
ORDER CODE: EB310
OSCILLOSCOPE PROBE 250MHZ
(HP9250)
This Velleman Panel Scope is a LCD, panel
mountable, single channel oscilloscope. This
oscilloscope is ideal for monitoring, system
analyses, educational purposes, system
demonstrations, sensor testing or even connecting it to an audio system!
Features:
panel mount
high contrast backlight LCD
recorder roll mode
easy to use set-up menu
measurements: rms, dB(rel), dBV, dBm
Direct Audio power measurements
x1 and x10 probe calculation
6 display modes
Specifications:
1-channel oscilloscope
power supply: 9-13Vdc or 6Vac / 300mA
10MHz sampling rate
input impedance: 1 M Ohm // 30pF
BNC-input connector
AC or DC selection for input coupling
0.1mVpp sensitivity
5mV - 20V/division in 12 steps
200ns - 1hour/division time base
full auto set up
X and Y position signal scrolling
DVM (digital voltmeter) with x10 options
audio power calculation (rms and peak)
dBm, dBV, DC, rms ... measurements
recorder function (roll mode)
Display: 128x64 pixels LCD white backlight
Dimensions: 165 x 90mm, depth 35mm
oscilloscope probe x1 / x10: EB310
adapter 9Vdc / 500mA: GB836
ORDER CODE: AB354
Signal Rise Time: 58ns
Input Impedance: 1M Ohm (oscilloscope)
Input Capacitance: 47pF + oscilloscope
input capacitance
Max. input Voltage: 600V DC
Signal Rise Time: 1.4ns
Input Capacitance: Approx. 14pF
Max. input Voltage: 600V DC
05.1
The single channel Velleman HPS10
Personal-Scope is not a graphical multimeter
but a complete portable oscilloscope at the
size and the cost of a good multimeter. Its
high input sensitivity - down to 0.1mV/division - and extended scope functions make
this unit ideal for hobby, service, automotive
and development purposes. Because of its
extreme value for money, the PersonalScope
is well suited for educational use in schools
and colleges. Suitable for measurements on
audio equipment, mains voltage applications,
digital signals, all kind of sensors, signal
analysis in automotive applications, car
stereo, etc… Its full auto setup function,
makes measuring waveforms very easy.
Specifications:
10MHz sampling rate
0.1mVpp sensitivity
200ns - 1hour/division time base 32 steps
full auto set up
trigger modes: run, normal, once, roll, slope
DVM readout with x10 options
audio power calculation (rms and peak)
dBm, dBV, DC, rms ... measurements
signal markers for Voltage and Time
frequency readout (through markers)
recorder function (roll mode)
signal storage (2 memories)
LCD: 128x64 pixels / high-contrast
up to 20hours on alkaline batteries
it has a built-in battery charging circuit
one oscilloscope probe is supplied
power supply: 5 x 1.5V AA cells of type:
alkaline: 2x AB748 (not included) or
NiMH: 5x AA545 (not included) or
NiCd: 5x JB039 (not included)
practical holster: GB838
handcase: GB839
adapter 9Vdc / 500mA: GB836
ORDER CODE: GB576
HPS40 HANDHELD SCOPE
240Ms/s ADVANCED
PERSONAL SCOPE APS230
The Velleman APS230 is an advanced dual
channel, “hand-held” oscilloscope. A power
supply, battery pack, user manual, serial
cable, and two insulated 60MHz (x1 / x10)
oscilloscope probes are supplied.
The goal with the single channel Velleman
Specifications:
HPS40 is to have a user-friendly, feature2-Channel Oscilloscope
packed and genuinely "hand-held" oscilloSupply Voltage: 9Vdc (DC regulated)
scope.
Features:
Rechargeable Battery: (is supplied)
low noise, high sensitivity, modest weight, a
6V / 1800mAh NiMH battery pack
backlit LCD and a choice between regular
Built in Fast Charger:
batteries or rechargeable ones. It also offers
charging current: 400mA
a selection of 5 different screen layouts.
Maximum Sample Rate per channel:
Both novices and professional users will
240M samples / sec. for periodic signals
admire the fast and fully automatic setup
60M samples / sec. for single shot events
function, allowing them to perform measureMax. Input Amplifier Frequency Bandwidth:
ments without physically touching the unit!
30MHz per channel (except the 1mV and
Floating voltage measurements are com2mV boost range)
pletely safe thanks to battery-powered operInput Impedance: 1M Ohm // 20pF
ation and the (included) fully insulated measMaximum Input Voltage: 100Vpeak (DC+AC)
uring probe. These features make the
Input Coupling: DC, AC and GND
HPS40 indispensable to the professional
(use GND for auto zero referencing)
user, service centres and even to the hobbyVertical Resolution: 8 bit ± 1 bit linearity
ist.
X and Y position shift
Specifications:
Step markers for voltage, time, ...
Full auto set-up for volt/div. and time/div.
40MHz sampling rate
Trigger Modes: Run, Normal, Once and
Roll mode for 10 sec./Div. and slower
0.1mV input sensitivity
Adjustable Trigger: level and select
positive or negative signal slope
50ns - 1hour/division time in 34 steps
Display: 128 x 192 pixels, high contrast LCD
full auto set up
with white LED backlight
adjustable trigger level
Signal Storage: 256 samples per channel,
but 2047 samples in Roll mode for up to
DVM readout
25 hours of recording per screen
audio power calculations (rms and peak)
Stereo Scope mode for audio measurement
for 2, 4, 8, 16 and 32 ohm loads
Direct Audio power measurements
dBm, dBV, DC, rms ...measurements
dBm Measurement (0dBm = 0.775V):
Voltage and Time signal markers
-80 to +40dB (60dB max. with x10 probe)
frequency readout (through markers)
± 0.5dB accuracy
transient recorder function (roll mode)
dBV Measurement (0dBV = 1V):
signal storage (2 memories)
-78 to +38dB (58dB max. with x10 probe)
high resolution LCD 192x112 pixels
± 0.5dB accuracy
LCD backlight
True-rms Measurement:
optical isolated RS232 output for PC
0.03mV to 80V (400Vrms max. x10 probe)
HPS40 unit, user manual, one oscilloscope
2.5% accuracy
probe, RS232 connection lead (to DB9),
Peak Measurements:
flexible carry protection holster, handy rigid
min., max. and peak to peak
carry case and battery charging circuit
Other Measurements:
power supply: 5 x 1.5V AA cells of type:
dB(rel) and dBG
alkaline: 2x AB748 (not included) or
Timebase Range:
NiMH: 5x AA545 (not included) or
25nsec. to 1 hour / Division in 35 steps
NiCd: 5x JB039 (not included)
Input Sensitivity Range:
1mV to 20V/Div. in 14 steps (x1 probe)
adapter 9Vdc / 500mA: (GB836)
10mV to 200V/Div. in 14 steps (x10 probe)
ORDER CODE: GB813
Probe Calibration Output: 1.2 kHz / 3Vpp
Computer Interface:
internal optical isolation
57600 bps Baud rate, RS232 for screen
and data transfer
Protection: IEC1010, 600V CATII
Weight: 850g (battery weight is included)
Optional: soft carrying case (GB577)
ORDER CODE: AB315
05.2
CARRYING BAG FOR PORTABLE
HPS-SERIES OSCILLOSCOPES
A practical leather and clear plastic holster.
ORDER CODE: GB838
CARRYING CASE FOR PORTABLE
HPS-SERIES OSCILLOSCOPES
A sturdy blow moulded carrying case.
ORDER CODE: GB839
PCS100 DIGITAL STORAGE
OSCILLOSCOPE FOR PC
The Velleman PCS100 is a single channel
digital storage oscilloscope, using a computer and its monitor to display waveforms. All
standard oscilloscope functions are available
in the Windows program supplied. Its operation is just like a normal oscilloscope.
Connection is through the computer's parallel port, the scope is completely optically isolated from the computer port.
single channel
input impedance: 1Mohm // 30pF
markers for voltage, time and frequency
auto setup function
record and display of screens and data
supply voltage: 9 - 10Vdc / 500mA
weight: 400g
includes:
PCS100 unit, 1 oscilloscope probe,
PC parallel cable, user manual and
CD with software
ME, (Win2000 or NT possible),
free printer port LPT1, LPT2 or LPT3
Specifications:
oscilloscope:
timebase: 0.1µs - 100ms per division
trigger source: Channel 1 or free running
trigger level: adjustable per ½ division
input sensitivity: 10mV - 3V / division
record length: 4096 samples
sampling frequency: 800Hz - 32MHz
(Real time)
transient recorder:
timescale: 20ms - 2000s / division
max. record time: 9.4hour / screen
automatic storage of data
automatic recording for more than 1 year
zoom function
spectrum analyser:
frequency range: 0 .. 400Hz - 16MHz
linear or logarithmic timescale
zoom function
adapter 9Vdc / 850mA: AB006
PLEASE NOTE: GB835 INCLUDES THE
ADAPTER
ORDER CODE: GB823
mouse, CD-ROM and free printer port
Specifications:
Oscilloscope:
timebase 20ns - 100ms / division
trigger sources: CH1, CH2, EXT or free
running
trigger on rising or falling edge
trigger level is adjustable over whole
screen
step interpolation linear or smoothed
markers for voltage and frequency
input sensitivity 5mV - 15V / division
auto setup-function
pre-trigger function
recording length 4096 samples / channel
sampling frequency:, 1.25kHz - 50MHz
(real-time) and 1GHz (repetitive)
Spectrum analyser:
frequency range 0...1.2kHz - 25MHz
linear or logarithmic time scale
operating principle FFT (Fast Fourier
Transform)
PCS500 DIGITAL STORAGE
FFT resolution 2048 lines
OSCILLOSCOPE FOR PC
FFT input channel: CH1 or CH2
zoom function
markers for amplitude and frequency
Transient recorder:
time scale 20ms - 2000s / division
max. recording time: 9.4hours / screen
automatic data storage and recording
for more than 1 year
sampling rate: 1 sample / 20sec. - 100s / s
zoom function
recording and display of screens
data format: ASCII
adapter 9Vdc / 1000mA (AC672)
The Velleman PCS500 is a dual channel digPLEASE NOTE: GB834 INCLUDES THE
ital storage oscilloscope that uses a computADAPTER
er and its monitor to display waveforms. All
ORDER CODE: EB850
standard oscilloscope functions are available
SOFT CARRYING CASE /
using the supplied Windows program. Its
operation is identical to that of normal oscilGENERAL INSTRUMENT BAG
loscope apart from the fact that all operations can be performed with the mouse.
Connection is made through the computer's
parallel port and the scope is completely
optically isolated from the computer port.
The oscilloscope and transient recorder have
two completely separated channels with a
sampling frequency up to 1GHz. Any waveform displayed on the screen can be stored
for later use in documents or for the comparison of waveforms.
frequency response: DC - 50MHz (± 3dB)
Cyan coloured material bag with a zipinputs: 2 channels
fastener. Dimensions: 240 x 180 x 50mm.
1 external trigger input
ORDER CODE: GB577
input impedance 1Mohm // 30pF
max. input voltage 100V (AC + DC)
input coupling: DC, AC and GND
supply voltage: 9 - 10Vdc
includes:
PCS500 unit, 2 oscilloscope probes,
PC parallel cable, user manual and
CD with software
05.3
SIGNAL GENERATORS
PC FUNCTION GENERATOR
0 - 1MHZ
Features:
The Velleman PCG10 has a
frequency range: from 0.01Hz to 1MHz
crystal-based stability
optically isolated from the PC
low sine wave distortion
TTL-level synchronisation output
stores up to 32K of waveform points
you can create your own waveforms with
the integrated signal wave editor
function generator screen with signal
preview
predefined library waveforms are included:
noise, sweep, ...
standard waveforms: sine, square, triangle
extended bode plot possibility, used with
Velleman PC oscilloscopes
can be chained with Velleman PC
oscilloscopes to the same PC printer port
(LPT1, 2 or 3)
includes:
PCG10 unit, PC parallel cable,
user manual, CD with PCLab2000
software: Windows™ integrated software
for the function generator and Velleman
PC oscilloscopes
mouse, CD-ROM,
and free printer port LPT1, LPT2 or LPT3
Specifications:
maximum sample rate: 32M samples / sec.
direct digital wave synthesis (DDS)
32K wave table
distance control via RS232
frequency setting resolution: 0.01%
amplitude range: 100mVpp to 10Vpp @
600 Ohm load
amplitude resolution: 0.4% of full scale
offset: from 0 to -5V or 0 to +5V max.
(resolution 0.4% of full scale)
vertical resolution: 8 bits (0.4% of full scale)
typical sine wave distortion (THD): < 0.08%
output impedance: 50 Ohm
supply voltage: 12Vdc
signal connecting cables
adapter 12Vdc / 800mA
PLEASE NOTE: GB840 INCLUDES THE
ADAPTER
ORDER CODE: GB648
MULTIMETERS
TEST LEADS
Display: analogue
Ranging mode: manual
Weight (with battery): ± 280g
Accessories: manual, test leads and battery
ORDER CODE: RB004
DIGITAL MULTIMETER WITH
TEMPERATURE METER MTD10
DIGITAL MULTIMETER 3 ½ DIGIT
4mm Multimeter Test Leads with protection
caps. 1kV /15A max.
(IEC1010 CLASS 2 protection)
ORDER CODE: QB076
INSULATED TEST PROBE
WITH STAINLESS STEEL TIP
Test probe with plastic insulating
sleeve. The thin stainless steel
tip penetrates insulation and
oxide layers. It has a built-in
4mm Ø brass banana socket.
Voltage Rating: 60Vdc
Volume Resistance: 50mOhm
Features:
voltage measurements: AC 600V max. and
DC 600V max.
current measurements: max. 10A
AC827 Black
resistance measurements: 2M Ohm max.
AC828 Red
automatic polarity function
low-battery indication
ANALOGUE MULTIMETER
transistor and diode test
Specifications:
DC Voltage: 200m/2/20/200/600V
Basic Accuracy: ±0.5%
AC voltage: 200/600V
Frequency Range: 45 to 450Hz
max. Input Voltage: 750Vac
DC Current: 200µ/2m/20m/200m/10A
Basic Accuracy: ±1.0% for 200µ/2m/20mA
±1.2% for 200mA range
±3.0% for 10A range
Ideal for beginners.
Overload Protection:
Features:
0.2A is fused / 10A is not fused
Mirror scale for accurate reading
Resistance: 200/2k/20k/200k/2M Ohm
DC and AC voltage measurements: up to
1000V
±1.0% for 2M range
DC current: 50µA to 250mA
Overload Protection: 220V
resistance measurements
two transistor tests: Iceo-test and hFE-meas- Over Range: shows “1”
Transistor Test: base current 10µA/Vce 2.5V
urements
Diode Test: 0.7mA forward test current
diode test: reverse and forward current
Low-Battery indication: shows “BAT”
measurements
max. Display: 1999
with dB-scale
LCD Display Size: 46 x 15mm
Specifications:
Ranging Mode: manual selection knob
DC Voltage:
100m/500m/2.5/10/50/250/1000V
Basic Accuracy: 3% at FSD
Input Impedance: 20kOhm/V
Accessories: manual, test leads and battery
AC Voltage: 10/50/250/1000V
ORDER CODE: PB279
Input Impedance: 9kOhm/V
max. Input: 1000V
DC Current: 50µ/2.5m/25m/0.25A
Overload Protection: 1.5A
Resistance: x1/x10/x100/x1k/x10k Ohm
Overload Protection: 1.5A
Transistor Test: hFE 0-1000 (with extra connector) / Iceo
Diode Test: yes, forward and reverse current
05.4
The MTD10 is a compact pocket size 3 ½
digit multimeter for measuring DC and AC
Voltage, DC Current, Resistance and Diode.
This meter provides Temperature, Transistor
measurements and an audible continuity test
function. Full range overload protection and
low battery voltage indication is provided.
Specifications:
DC Voltage: 200m/2/20/200/1000V
AC Voltage: 200V / 750V
DC Current: 2000µ/20m/200m/10A
Temperature: -20ºC to 1370ºC
Transistor Test: NPN or PNP transistors
Continuity Test: Buzzer sounds if measured
connection resistance is less than 20 Ohm
Typical Accuracy:
DC voltage: ±0.5 % rdg + 2 dgt
AC voltage: ±1.2 % rdg + 1 dgt
DC Current: ±1.2 % rdg + 2 dgt
Resistance: ±0.8 % rdg + 2 dgt
Temperature: ±3 % rdg + 2 dgt
Temperature Resolution: 1ºC
Accessories: Holster, Battery, Test Leads,
Temperature Probe and Instruction Manual
Weight: 220g
Power Source: 9V Battery
ORDER CODE: GB519
3 ¾ DIGIT DIGITAL MULTIMETER
This is a professional, 3 ¾ Digit, LCD,
digital multimeter.
Polarity, low-battery indication and
bargraph annunciators
Overload protection
auto/manual ranging
Data-hold function
Transistor, diode and continuity test
Capacitance measurements: up to 32.6µF
Frequency measurements: up to 150kHz
Holster is included
Specifications:
DC Voltage: 326m/3.26/32.6/326/1000V
AC voltage: 3.26/32.6/326/750V
Frequency Range: 40 to 1000Hz
max. Input Voltage: 750Vac
DC Current: 326µ/3260µ/32.6m/326m/10A
Basic Accuracy: ±1.2% (±2% 10A range)
Overload Protection: 0.5A and 10A fused
AC Current: 3.26m/32.6m/326m/10A
Basic Accuracy: ±0.5% (±2% 10A range)
Overload Protection: 0.5A and 10A fused
Resistance:
326/3.26k/32.6k/326k/3.26M/32M Ohm
Basic Accuracy: ±0.8% (±1.2% for 32.6M
range)
Capacitance: 326n/32.6µF
Frequency Measurement: 32kHz/150kHz
Over Range: yes “OL”
Continuity Buzzer: yes
Transistor Test: yes 10µA /3.4V
Diode Test: yes 0.4mA
Low-Battery indication: yes
max. Display: 3999 + bargraph
LCD Display Size: 31 x 61mm
Ranging Mode: auto/manual
Data hold: yes
Accessories: Manual, Test Leads, Holster
and 9V Battery
ORDER CODE: PB007
range)
AC Current: 2m/20m/200m/10A
Basic Accuracy: ±0.5% (±2.0% for 10A
range)
Overload Protection: 10A
Resistance:
200/2k/20k/200k/2M/20M/200M Ohm
Basic Accuracy: ±0.3% (±5.0% for 200M
range)
Capacitance: 2000p/20n/200n/2µ/20µF
Frequency: 20kHz
Over Range: yes “1”
Transistor Test: yes 10µA / 3.2V
Diode Test : yes
max. Display: 9999
LCD Display size: 30 x 61mm
Ranging mode : manual
Data Hold: yes
Auto Power-Off: yes
Weight (with battery): 310g
Accessories: Manual, Test Leads, Holster,
Capacitance Connector and 9V Battery
ORDER CODE: RB007
Resistance: 400/4k/40k/400k/4M/40M Ohm
Basic Accuracy: ±1.2% (±3.0% for 40M
range)
Overload Protection: 250Vdc or 250Vrms
Capacitance: 4n/400nF
Temperature: 0° to 400°C / 400°C to 750°C
Over Range: yes “OL”
Transistor Test: yes
Diode Test: yes
max. Display: 3 ¾ Digit + 38 seg. Bargraph
Ranging Mode: Auto / Manual
Data Hold: yes
Backlight: yes
Weight (with battery): ±300g
Accessories: user manual, test leads,
holster, 9V battery, RS-232C cable,
software and K-type thermocouple
ORDER CODE: GB670
DIGITAL CLAMP METER
3 ¾ DIGIT, BACKLIT,
DIGITAL MULTIMETER
WITH RS-232 OUTPUT
4½ DIGIT TRUE RMS
DIGITAL MULTIMETER
This is a professional, True RMS. 4 ¾ Digit,
LCD, digital multimeter.
Polarity, low-battery indication and
10 different functions and 32 ranges
Overload protection
Data-hold function
Auto Power-off
Capacitance measurements: up to 20µF
Frequency measurements: up to 20kHz
Holster is included
Specifications:
DC Voltage: 200m/2/20/200 /1000V
AC voltage: 2/20/200/750V
Frequency Range: 40-1000Hz
DC Current: 2m/20m/200m/10A
This is a professional, 3 ¾ Digit + 38-segment bargraph, LCD, digital multimeter.
Polarity, low-battery indication and backlight
Auto/manual ranging
Overload protection
Data-hold function
Temperature measurement
Capacitance measurements
RS232C standard interface to connect PC
Specifications:
DC Voltage: 4/40/400/1000V
Basic Accuracy: ±0.5% (±0.8% for 1000V
range)
AC Voltage: 4/40/400/750V
Basic Accuracy: ±1.2% (±1.5% for 750V
range)
Frequency Range: 40-400Hz
DC Current: 4m/400m/10A
range)
Overload Protection: 15A/250V-fuse
(for 10A-range)
AC Current: 4m/400m/10A
range)
Overload Protection: 15A/250V-fuse
(for 10A-range)
05.5
This is a low-cost digital clamp meter. High
current / voltage measurements are taken
without cutting or making direct electric contact with live wires.
Features:
3 ½ Digit LCD display with
automatic polarity indication
data-hold function
AC current measurements: max. 1000A ·
insulation test: max. 2000MOhm ·
voltage measurements:
AC (max. 750V) and
DC (max. 1000V)
resistance measurements: max. 20Kohm
a carrying bag is included
Specifications:
DC voltage: 1000V max.:
basic accuracy: ±0.8%
input impedance: >9Mohm
AC voltage: 750V max.:
input impedance: >9Mohm
AC current: 200/1000A:
overload protection: 1200A for 60 seconds·
resistance: 200/20k:
(insulation test : 20M/2000M)
(±2.0% for insulation test)
overload protection: 500V
overrange: yes "1"
continuity buzzer: yes
low-battery indication: yes "BAT"
ranging mode: manual
data hold: yes
Weight (with battery): ±320g
Accessories: manual / test leads / battery /
carrying bag
ORDER CODE: AB157
DIGITAL CAPACITANCE METER
UP TO 20MF
and capacitor values from 1pF to 200µF.
Direct insert jacks are used for easy measurement and a set of external test clips are
also supplied.
Specifications:
Power Supply: 9V battery (is supplied)
3 ½-Digit LCD display with
Battery-Low Indication
4 Inductance Measuring Ranges:
2mH, 20mH, 200mH, 2H
Accuracy:
2mH - 200mH range: ±2%
2H range: ±5%
Note: This meter is not recommended for
measuring inductor values below 100µH.
6 Capacitance Measuring Ranges:
2nF, 20nF, 200nF, 2µF, 20µF, 200µF
Accuracy: ±4.0%
Accessories:
Manual, Test Clips, Holster and 9V Battery
ORDER CODE: AC862
ANALOGUE, MOVING COIL,
DC VOLTAGE PANEL METERS
GB699
GB700
EB807
EB360
15V
15V
30V
30V
DC,
DC,
DC,
DC,
47
60
47
60
x
x
x
x
60mm
70mm
60mm
70mm
ANALOGUE, MOVING COIL,
DC CURRENT PANEL METERS
PANEL MOUNT DISPLAYS
This digital capacitance meter can test a
wide range of capacitor values. It can measure capacitors from 0.1pF up to 20,000µF.
The zero adjustment knob enables one to
take accurate measurements. Direct insert
jacks are used for easy measurement and a
set of external test clips are also supplied.
Specifications:
Power Supply: 9V battery (is supplied)
3 ½-Digit LCD display with
Battery-Low Indication
9 Capacitance Measuring Ranges:
200pF, 2nF, 20nF, 200nF, 2µF, 20µF,
200µF, 2mF and 20mF
Accuracy:
200pF - 200µF range: ±0.5% of full scale
2mF range: ±1.0% of full scale
20mF range: ±2.0% of full scale
Capacitor Testing Frequencies:
800Hz: from 200pF up to 2µF range
80Hz: 20µF range
8Hz: 200µF range and larger
External Zero Adjust: ±20pF
Dimensions: 31.5 x 91 x 189mm
Accessories:
Manual, Test Clips, Holster and 9V Battery
ORDER CODE: AA694
3 ½ DIGIT LC METER
3 ½ DIGIT, LOW COST,
DIGITAL PANEL METER 9VDC
AB404
GB698
AD069
AB405
GB661
AC955
AC888
EB436
EB806
FB725
50µA DC, 47 x 60mm
100µA DC, 60 x 70mm
1mA DC, 47 x 60mm
50mA DC, 60 x 70mm
100mA DC, 60 x 70mm
500mA DC, 60 x 70mm
1A DC, 60 x 70mm
5A DC, 47 x 60mm
5A DC, 60 x 70mm
15A DC, 60 x 70mm
DIGITAL THERMOMETER
Specifications:
3 ½ digit LCD display
Supply Current: 1mAdc
Please Note: the 9V-supply ground, (0V),
should not be connected to the negative,
input (VIN-).
Sampling Rate: 2 - 3 samples per second
Maximum Input Voltage (only DC voltages):
200mVdc full-scale factory set,
but by changing some resistors it can be
set for full-scale display:
20Vdc, require 9.9M and 100k Ohm or
200Vdc, require 9.99M and 10k Ohm or
500Vdc, require 9.999M and 1k Ohm
(only use ½W, ½% metal film resistors)
High Input Impedance: 100M Ohm
Guaranteed zero reading for 0V input
Accuracy: ±0.5%
Automatic Polarity Indication
Decimal Point Selection: with wire jumper
Character Height: 13mm
Dimensions:
Visible LCD: 20 x 46mm
Outer Edges: 44 x 68mm
Panel Hole: 38 x 54.5mm
ORDER CODE: GB701
MANUFACTURER CODE: PM-438T
This digital LC meter can test a wide range
of inductor, ‘L’, and capacitor, ‘C’, values. It
measures inductor values from 100µH to 2H
05.6
Features:
Easy panel mounting
Large and clear display
High-grade ABS casing
Specifications:
3 digit LCD display
Supply Voltage: 1 x 1.5V button cell (GB718)
(1.5V cell is included)
Temperature Measuring Range:
-50°C to 70°C
Accuracy: 1°C
Cable Length of Temperature Sensor: 1.5m
Dimensions:
Display: 12 x 6.5mm
Panel: 47 x 26mm, 13mm height
ORDER CODE: AB502
TESTING DEVICES
LOGIC PROBE
LP-2800
Carrying bag is supplied
Specifications:
Power Supply: 9V-battery (not included)
Tests for Cable Types:
RJ45, 10 Base-T, Token Ring, RJ11, RJ12
and BNC coaxial cable
Cable Fault Tests:
continuity, open-circuit, short-circuit and
crossed wire pairs
ORDER CODE: AD247
DIGITAL ALCOHOL
BREATHALYSER
LED TESTER MODULE
Input impedance: 1M Ohm
Width of minimum pulse: 30 ns
Maximum input frequency: 17 MHz
Measurable Logic Gate: TTL and CMOS
Logic 1 (red LED lights) and then buzzes.
2.3V approx. 0.2V 70% Vcc
Logic O (green LED lights) and then buzzes.
0.8V approx. 0.2V 30% Vcc
Input overvoltage protection
This LED (light emitting diode) tester may be
Pulse (yellow LED) flashing time: 500 ms
used to determine the functionality, brightORDER CODE: AA713
ness, colour and polarity of various types of
LEDs. The LEDs may also be tested using
LOGIC PULSER LP-540H
the following DC currents:
1mA, 2.5mA, 5mA, 10mA, 20mA and 50mA.
A LEDs 2 leads are easily inserted into the
chosen test-current contacts even when covered with residual solder. The brightness of
any two LEDs may be compared by using
the two 10mA test sockets that are set side
by side.
Specifications:
Supply Voltage: 9V battery
LED-Connection: test-contact sockets
LED-Testing Currents: 1mA, 2.5mA, 5mA,
10mA, 20mA and 50mA DC
The logic pulser is a very effective tool for
inspecting and repairing logic circuits.
ORDER CODE: GB766
Specifications:
Sync input impedance: 1M Ohm
INFRA-RED DETECTING MODULE
Pulse repetition rate: 0.5pps/400pps
Pulse width in pulser output at 100m: 10us
Output current
1 pulser mode: 100mA sink/source
2 square wave output: 5mA sink/source
Maximum allowable supply voltage: 20V
Operating supply voltage range: 3 - 15V
ORDER CODE: AA714
LAN TESTER
FOR RJ45, RJ12, RJ11, RJ10 & BNC
This "Infra-red Detector" module contains an
IR (infra-red) sensor to detect IR-radiation.It
may be used to determine if an IR remote
control unit is functional by testing for its IRradiation when pressing any button on the
unit.
This LAN (local area network) tester can be It can also be used, in the same way, to test
IR-light barriers etc. The module lights up a
used for testing different cable types. It is
LED while detecting IR-radiation. It is suitindispensable during the installation and
maintenance of computer network and tele- able for testing most remote controls and IRtransmitters. An indispensable test instruphone cables.
ment for radio and TV workshops.
Features:
Specifications:
LEDs are used for test indication
It is user friendly and makes testing easy
Sensitivity: reacts on almost every IRTest cables from a remote location and
remote control
in places that are not easily accessible
All the different tests are automatically done Display: indication with built-in LED
BNC adapter is supplied for BNC cable tests Dimensions: 30 x 40 x 17 mm
ORDER CODE: GB792
05.7
This digital breathalyser provides a good
indication of the blood alcohol level using a
digital LC display. It also produces a beeping
sound if you are legally intoxicated (0.5%
blood alcohol concentration). Please note
that although this device provides a good
indication of the blood alcohol level, it is not
precise and should not be used irresponsibly. There is no substitute for responsible
alcohol consumption and you should never
drink and drive!
Specifications:
Display: LC display with backlight
Range of Reading: 0.2 - 1.2% BAC
Alert Threshold Level: 0.5% BAC
Power Supply: 3 x 1.5V AAA cells (not
included)
Auto Power Off: 2 minutes
Breath Sampling Time: > 5 seconds of
continuous breathing
Recycle Time: ± 30 seconds (between
measurements)
Dimensions: 105 x 45 x 24mm (pocketsize)
Weight: 50g (without batteries)
Accessories: 3 blowing tubes
ORDER CODE: FB119
SPARE BREATHALYSER TUBES
Five spare tubes for the digital alcohol
breathalyser (FB119).
ORDER CODE: AB503
METAL DETECTORS
A Metal detector detects metal
objects that are buried in dry
ground better than in wet
ground. Objects are harder to
detect in dens ground than in
loose sea sand. The type of
metal also plays a role in the
detection.
Larger objects are easier to find
than smaller ones. For example:
The metal detector (FB114) can
find a coin with a diameter of
25mm at the depth of 100mm.
Although most items are found at
a depth of less than 300mm, an
aluminium pot was found at a
depth of 500mm.
METAL DETECTOR TYPE 100
Specifications:
power supply: 2 x 9V-batteries (not included)
weight: 0.85kg
ORDER CODE: AB290
PLCC IC EXTRACTOR
TOOLS
ANTI-STATIC
PROTECTION
ANTI-STATIC WRIST STRAP
Hunt for coins, relics, jewelry, gold and silver
just about anywhere. The detector has a
built-in speaker, 3.5mm headphone output,
VU-meter, waterproof search coil and an
adjustable stem.
Specifications:
Power Supply : 6 x size AA 1.5V cells
Detection Range: 150mm max.
Dimensions:
Search Coil: 165mm diameter
Adjustable Stem: 390 - 690mm
Control Unit: 101 x 122 x 235mm
Adjustable, blue, PVC anti-static wrist strap
Weight: 895g
with crocodile clip for connection to a
ORDER CODE: FB114
grounded point. Grounding coil cord with
embedded 1mega Ohm resistor for safety
METAL DETECTOR TYPE 150
protection.
ORDER CODE: QB077
IC HANDLING
The extractor is suitable for removing 18pin to 124-pin PLCC IC’s.
ORDER CODE: AA712
IC STRAIGHTENER FOR 0.3 AND 0.6
INCH DIP IC’S
This tool is ideally suited when you wish to
straighten the pins of IC’s that have to fit a
breadboard. The tool can also be grounded
to protect your IC against static.
ORDER CODE: PB298
ASSISTING TOOLS
HELPING HAND PCB STAND
ANTI-STATIC IC EXTRACTOR
Features:
Hunt for coins, relics, jewellery, gold and silver.
3-Tone Audio Discriminator
Built-in Speaker
3.5mm Headphone Output
VU-Meter
Waterproof Search Head (20cm diameter)
Adjustable Stem
Specifications:
Power Supply : 3 x 9V-battery (not included)
Weight: 1.483kg
ORDER CODE: AB147
This is a very useful pair of adjustable crocoIdeally suited for the electronic hobbyist. The
dile clips and magnifying (2.5 Dioptre)
extractor is suitable handling and removing
device. Size: 125 x 55 x 195mm
ICs. Size: 105mm
ORDER CODE: EB934
ORDER CODE: AA433
DIP IC EXTRACTOR
QUICK RATCHETING BAR CLAMP
METAL DETECTOR C.SCOPE
This IC (integrated circuit) extractor is ideal
for removing DIP (dual in-line) ICs from ICsockets and solderless breadboards. It is
ideal for those who do circuit prototyping on
solderless breadboards.
ORDER CODE: AA711
Features:
Hunt for coins, relics, jewellery, gold and silver.
Ideal for starters
Headphones output socket
Waterproofed ISOCON Search Head with
25cm diameter
Easy to assemble
User-friendly with only two button controls
05.8
This is a light weight, easy to use bar clamp.
You only need to use one hand to operate
this clamp. A ratchet is used for tightening
the clamp and maintaining clamping pressure. The clamp is operated by repeatedly
pressurising and releasing the lever on the
handle. The two jaws of the clamp can either
be clamped towards each other or spread
away from each other to exert an outward
pressure. Press the button above the handle
to release the grip of the ratchet.
Specifications:
Maximum Jaw Opening: 100mm
Jaw Material: nylon fibre filled composite
ORDER CODE: AC860
LAMP WITH MAGNIFYING GLASS
60mm GRIPPING TOOL 8pcs
This light weight, easy to use gripping tool is
supplied in a pack of 8 pieces.
Specifications:
Length: 60mm
ORDER CODE: AC861
127mm GRIPPING TOOL 30pcs
This light weight, easy to use gripping tool is
supplied in a screw-top, plastic container of
30 pieces.
Specifications:
Length: 127mm
ORDER CODE: AC859
SET OF 4 TWEEZERS
STAINLESS STEEL
This magnifying lamp is designed as an aid
for all kinds of precision work that requires a
good field of visibility. A three-dioptre lens
(1.75 magnification) is encircled by a 22W
fluorescent tube. A well-balanced, universally
jointed arm for maximum adjustment. A base
clamp is used to mount the device on the
edge of a table top.
Specifications:
Colour: black
Dimensions:
Arm length: 105cm
Lamp Holder Diameter: 24cm
Spare circular lamp: (AB227)
ORDER CODE: AB173
SPARE CIRCULAR
FLUORESCENT TUBE 22W
This is a set of four antimagnetic, stainless
steel tweezers that consists of the following:
1 x bent nose, 1 x flat spade, 1 x self-closing
and 1 x normal
ORDER CODE: AB399
SET OF 4 TWEEZERS
NON-CONDUCTIVE
This is a set of four non-conductive plastic
tweezers.
ORDER CODE: AB400
3-PRONGED GRIPPING TOOL
COMPUTER MONITOR SHELF
A circular fluorecent tube rated 22Watt for
the Lamp with Magnifying Glass (AB173)
ORDER CODE: AB227
This device is used to save desk-top space.
It is placed on top of a computer monitor to
form a shelf. Dimensions : 43 x 46 cm.
ORDER CODE: GB381
TWEEZERS
POCKET TOOL WITH LED LIGHT
AND POUCH
This is a pencil shaped gripping tool with
three retractable hooking wires at the front
end and a releasing knob at the back end. It
is ideal for removing small objects from out
of difficult to reach spaces like a hole.
Size: 115mm
ORDER CODE: AD016
MINI-TORCH 3V
PLIERS AND CUTTERS
A strong mini torch of aluminium alloy. The
torch is 145mm longth, 28mm diameter.
Spare lamp is (GB697).
Supply voltage: 3V (2 x AA 1.5V cells)
ORDER CODE: FB046
Features:
A stainless steel Pocket Tool with LED light
the lifetime of the LED light: 100 000 hours
water-resistant
Tools: flat nose pliers, woodsaw, small
blade, small screwdriver and bottle opener
battery life: 12 hours (alkaline)
a nylon belt pouch is included
Specifications:
Power supply: 3 x 1.5V AG3 button cells
bulb type: white LED 5mm diameter
ORDER CODE: GB651
05.9
FB488 Precision flush cutting side cutter
130mm long
QB041 Electronic Diagonal Side Cutter
120mm Long
HEAVY-DUTY KNIFE SET 51 PCS
EB256 Side Cutter 120mm Long
AD102 Universal, Heavy-Duty Cutter
165mm Long
This knife set is ideal for doing model work
with soft materials like balsa wood, thin card
board, paper, etc...
Contains:
5 aluminium blade holders with 5 blades
31 spare blades
2 prickers with 2 pricker needles
4 pricker needles
1 tube of super glue
1 whetstone
ORDER CODE: AB329
WIRE STRIPPERS
ADJUSTABLE WIRE STRIPPER
RJ11 CRIMP ON TOOL
FOR RJ11 PLUGS
A 6 contact RJ11 (AA969) and RJ12
(GB720) modular telephone plug crimping
tool that cuts, crimps and strips.
Closed lock. All steel construction.
ORDER CODE: EB880
RJ45 CRIMP ON TOOL
FOR RJ45 PLUGS
A 8 contact RJ45 (AA520) modular UTPcable plug crimping tool that cuts, crimps
and strips.
Closed lock. All steel construction.
ORDER CODE: AA607
COAX CRIMPING TOOL
RATCHET TYPE
EB258 Bent Nose Plier 120mm Long
EB257 Long Nose Plier 120mm Long
This is an adjustable wire cutter / stripper. It
has a brass adjusting screw that is used to
set the required cutting depth for different
wire thicknesses. It is chrome-plated.
Strips Wires from 0.2 to 3mm diameter
ORDER CODE: AB396
AUTOMATICALLY ADJUSTABLE
WIRE STRIPPER
CRIMPING TOOL FOR
CRIMPING CONNECTORS
RATCHET TYPE
QB006 Electronic Long Nose Pliers
140mm Long
SB008 Plastic Retractable Utility Knife
with snap off blades
This is a crimping tool with ratchet. It can be
used for crimping BNC, TNC, N, and F-connectors onto coaxial cable.
Specifications:
RG-type cables: 59, 62, 140, 210
BELDEN 8279, 55, 58, 141, 142, 223, 303,
400, FIBREOPTIC
Size: 220mm
ORDER CODE: AB398
This is an automatically adjusting wire cutter
or stripper. It strips wires with diameters:
1, 1.6, 2, 2.6 and 3mm
ORDER CODE: AB397
CRIMPING TOOLS
CRIMP ON TOOL
FOR RJ-TYPE PLUG (4P4C)
AB401 12 Spare Blades in container for
Retractable Utility Knife (SB008)
This is a RJ9 / RJ10 crimping tool. It is used
for crimping telephone handset connectors.
ORDER CODE: AB162
05.10
This is a crimping tool with ratchet. It can be
used for crimping red, blue and yellow insulated crimping connectors onto wire.
Specifications:
Crimping Wire Sizes:
Wire AWG: 22 - 18, 16 - 14, 12 - 10
Wire Size: 0.5 - 1, 1.5 - 2.5, 4 - 6 mm²
Size: 220mm
ORDER CODE: AC737
SCREWDRIVERS
2 PIECE CERAMIC ADJUSTER SET
SCREW DRIVER BIT SET 100 PCS
3 PIECE SCREWDRIVER SET
(2 X SLOTHEAD, 1 X CROSSHEAD)
This is a 2 piece ceramic adjuster set. It is
ideal for adjusting trimmer capacitors that
are electrically active in a powered circuit. It
These screwdrivers are ideal for all electron- is made of materials that will not interfere
with the electromagnetic fields in an electric
ic industry use. They have nickel-chrome
molybdenum steel blades with special hard- circuit.
Specifications:
ened tips. This precision screwdriver set
This ceramic adjuster set consists of:
consists of the following:
Two Protective Caps: one for each adjuster
Two Slothead Tip Screwdrivers:
One Slothead Tip Ceramic Adjuster:
2.4mm width x 75mm length
1.8mm width (flat 1.8)
One Cross-head Tip Ceramic Adjuster:
One Cross-head Tip Screwdriver:
Philips No. 0 (PH0)
Philips No. 0 x 75mm length
Ceramic Adjuster Size: 100mm
ORDER CODE: SB033
ORDER CODE: AD017
6 PIECE ELECTRONICS
SCREWDRIVER SET
This screwdriver set is ideal for electronics
applications: for fixing computers, TV sets,
communication instruments, radios, cameras, glasses, clocks, watches and other
kinds of precision devices. Each has a black
oxidised screwdriver tip and swivel-headed
cap.
This precision screwdriver set consists of:
Three Slothead Tip Screwdrivers:
Three Cross-head Tip Screwdrivers:
ORDER CODE: AB207
6 PIECE ELECTRONICS
SCREWDRIVER TORX SET
This is a screwdriver bit set that contains
100 pieces.
Contents:
cross bits: PH.0, PH.1, PH.2 (5x), PH.3
pozzi bits: PZ.0, PZ.1, PZ.2 (5x), PZ.3
square bits: S0, S1, S2, S3
flat bits: 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8mm
antenna remover bits: 4, 6, 8, 10
torx bits: T8, T10, T15, T20, T25, T27, T30,
T40, T45
tri-wing bits: 6, 8, 10
torx with centre bits: T8, T10, T15, T20, T25,
TOOL KITS
T27, T30, T35, T40
four-wing bits: 1, 2, 3, 4
metric hex bits: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6,
HOBBY TOOL KIT
8mm
clutch bits: 1, 2, 3
fractional hex bits: 1/16, 5/64, 3/32, 7/64,
1/8, 9/64, 5/32, 3/16, 7/32, 1/4
dodecagonal torx bits: M5, M6, M8
metric hex with centre bits: 2, 2.5, 3, 4, 5,
6mm
fractional hex with centre bits: 5/32, 9/64,
1/8, 7/64, 3/32, 5/64
This value for money tool kit is ideally suited 1 wing nut driver
for the electronic hobbyist. The kit contains
4 extension bits:
all necessary tools a hobbyist may require in
socket bit holder: 1 piece
a handy carry case:
magnetic bit holder: 1 piece
6 piece precision screwdrivers (phillips #0,
1/4" sq. x 1/4" x 2" extension: 1 piece
phillips #1, slotted 1.4, slotted 2.0, slotted
1/4" sq. x 1/4" x 1" extension: 1 piece
2.4, slotted 3.0).
ORDER CODE: AB327
Stainless tweezers
4inch Long nose pliers
CELLULAR PHONE TOOL SET
4inch Side cutter
10 piece bits pack (5mm, 6mm, #1, #2, no.1,
no.2, T-10, T-15, T-20, socket adaptor)
Handle
Extension bar.
ORDER CODE: AA274
TOOL SET 11 PCS
This TORX screwdriver set is ideal for: TV
sets, communication instruments, optical
instruments, cameras, computers, VCRs,
telephones, etc. It is used for driving TORX
screws that have 6-pointed, star shaped cavities.
This precision screwdriver set consists of:
TORX sizes:
T6, T7, T8, T9, T10 and T15 x 50mm
Screwdriver Size: 130mm
ORDER CODE: AB538
The home electrician will find this toolset
very useful.
Contents:
Flat Screwdrivers: 4 x 100mm, 3 x 75mm,
5.5 x 125mm, 6.5 x 150mm
Cross Screwdrivers: PH0 x 75mm,
PH1 x 100mm, PH2 x 100mm
Voltage Tester + Neon Indicator: 230 - 250V
Heavy-duty Pliers: 160mm
Heavy-duty Long Nose Pliers: 160mm
Heavy-duty Universal Cutter: 150mm
ORDER CODE: AB328
05.11
This screwdriver tool set is ideal for the cellular phone repairer. The set contains:
U-shaped, curved, needle tip, cross, flat,
3 x torx and 2 antenna removers with
coloured swivel caps.
ORDER CODE: AB149
COMPUTER SERVICING
TOOL KIT SY-805
The tool kit comes complete in a black zipper vinyl case and includes the following:
IC Inserter (14 - 16, 24 - 28 Pin ICs)
IC Extractor
Antistatic wrist strap
Solder Sucker
Solder Reel
Soldering Iron 25W
3 pcs soldering aid tools
Heat Sink
Long nose pliers with cutting edge
Side Cutter
ORDER CODE: AB337
PCB DRILLING TOOLS
DRILL WITH SPEED CONTROL
12-18VDC
DRILL 12 - 18V, MAINS ADAPTOR
AND DRILL STAND
COMPUTER SERVICING
TOOL KIT SY-815
The tool kit comes complete in a black zipper vinyl case and includes the following:
3 pcs Flat Screwdrivers
3 pcs Phillips Screwdrivers
Reversible T10/T15 Torque Driver
2 pcs Nut Drivers
IC Inserter (14 - 16 Pin ICs)
IC Extractor
Solder Sucker
Solder Reel
Soldering Iron 25W
3 pcs Soldering Aid Tools
Heat Sink
Spare Parts Tube
Tweezers
Reverse Action Tweezers
3 Claw Parts Retriever / Extractor
Long nose pliers with cutting edge
Adjustable Wrench
Wire Cutter
ORDER CODE: AA715
This drill is ideal for the electronic hobbyist’s
use. Useable on any workable material. The
12 - 18Vdc power supply allows the safe use
of coolant. It has precision ball bearings to
minimize axial and radial play. The thyristor
electronic speed control is enabled only
when used with Mains Adapter (GB194) and
is then adjustable from 5 000 to 20 000 rpm.
Six hardened steel collets are included: shaft
This is a complete starter drill set for detailed diameters: 1.0, 1.5, 2.0, 2.4, 3.0, and 3.2mm
The 20mm drill collar fits drill stand (AA190).
work. This set includes:
Power consumption 40W at 12 - 18V max.
Drill with speed control (AA188),
Length: 220mm, Mass approx. 230g.
Mains Adapter for drill:
(220Vac input with 12V output at 1.0A),
ORDER CODE: AA188
Drill Stand,
MAINS ADAPTER
Flexible Shaft with triple ball bearings,
FOR
DRILLING MACHINE
A plastic case and 34 bits are supplied,
6 hardened Steel Collets that can fit onto
both the drill and the flexible shaft.
ORDER CODE: AA189
DRILL WITH SPEED CONTROL
240VAC
This drill is ideal for the electronic hobbyist’s
use. Useable on any workable material. It
has precision ball bearings to minimize axial
and radial play. The rotational speed is
adjustable from 5 000 to 20 000 rpm. The
full wave electronic speed control nearly
maintains constant torque, even at lower
speeds. The keyless chuck accepts drill bit
shaft diameters of 0.5 to 3.2mm.
The 20mm drill collar fits drill stand (AA190).
A platic case and 40 bits are supplied.
Power consumption 100W at 220 - 240Vac
Class 2 electrical insulation
Length: 185mm, Mass approx. 450g.
ORDER CODE: AB709
This mains adapter is specially made for
Drilling Machine (AA188). This adapter
enables the speed adjusting function of the
drill. It has automatic overload cut-out without uncontrolled restart of the drill. A LED
indicates the working condition. Holes are
provided for storing bits as well as a foldaway tool rest. Input voltage 220-240VAC.
Output 12V at 2A operation and 16V open
circuit.
ORDER CODE: GB194
STEEL COLLETS
FOR DRILLING MACHINE
A set of 6 triple slit, hardened steel collets
05.12
and a steel collet clamping jaw. These parts
fit drilling machines (AB709) and (AA188).
Collets for drill bit shaft diameters of 0.8-1.0,
1.2-1.5, 1.8-2.0, 2.2-2.4, 2.8-3.0 and 3.03.2mm.
ORDER CODE: GB195
KEYLESS CHUCK
This is a high speed steel drill set that contains 7 pieces. One of each of the following:
0.5, 0.8, 1.0, 1.2, 1.5, 2.0 and 3.0mm dia.
ORDER CODE: AB714
HIGH SPEED STEEL
AD063 a single 0.6mm drill bit
AD064 a packet that contains 10 pieces of
0.6mm drill bits
AA403 a single 0.8mm drill bit
0.8mm drill bits
Keyless, 3 jaw chuck that can be used with
drilling machines (AB709) and (AA188).
It accepts drill bit shaft diameters of 0.5 to
3.2mm.
ORDER CODE: AA396
DRILL STAND 220 X 120MM
MACHINED BASE
CYLINDRICAL CUTTERS 2pcs
AA404 a single 1.0mm drill bit
1.0mm drill bits
This is a set of two pieces. Ideal for milling
rectangular grooves. Used to make 3mm
wide grooves. Shaft diameter is 3mm.
ORDER CODE: AB704
CONE SHAPED CUTTERS 2pcs
1.2mm drill bits
1.3mm drill bits
TUNGSTEN VANADIUM
Note: shaft diameter is 2.4mm
This is a set of two pieces. Ideal for profiling
work. The cone is 6mm diameter at its
widest and 4mm at the tip. Shaft diameter is
2.35mm.
ORDER CODE: AB713
SET OF PRECISION CUTTERS 5pcs
AA397
AA398
AA399
AA400
AA401
0.5mm
0.8mm
1.0mm
1.2mm
1.6mm
set
set
set
set
set
of
of
of
of
of
3
3
3
3
3
pcs
pcs
pcs
pcs
pcs
DIAMOND MICRO DRILLS 2pcs
The drill stand features the following:
Rigid chromed steel column diameter 20mm,
length 280mm.
Stable boom yields 140mm throat (column to
tool center) and 30mm travel.
Chrome operating lever and strong return
spring.
Machine milled guides and fittings.
Thumb screw for easy height adjustment
and drill locking as well as depth stop.
Holds drilling machines like (AA188) with
20mm or 34mm drill clamp.
Drill clamping section maneuverable 90
degrees to either side.
Two G-clamps included for fastening down,
but holes for fixing base to workshop are
also provided.
ORDER CODE: AA190
This is a diamond micro drill set that contains 2 pieces. Each bit is covered with natural diamond dust for drilling holes into precious stones, pearls etc. Used for drilling
0.8mm and 1.2mm diameter holes. Shaft
diameter is 2.35mm.
ORDER CODE: AB699
MILLING BITS
DRILL BITS
HIGH SPEED STEEL
This is a set of five pieces. Ideal for profiling
work. The set consists of the following bits:
Cone shape: 2.3mm diameter
Gear shape: 3.1mm diameter
Cylindrical shape: 2.3mm diameter
Arrow Tip shape: 2.3mm diameter
Ball shape: 2.3mm diameter
Shaft diameter is 2.35mm.
ORDER CODE: AB701
CUTTING DISCS
Note: These discs are used for
cutting wood, plastics and nonferrous metals.
CUTTING DISCS 10pcs
Note: Tungsten Vanadium milling
bits with the head and shaft
made out of a single metal piece.
It is used on soft / hard woods,
plastics and plaster of paris.
This set consists of ten Corundum cutting
discs and one mounting shaft.
Dimensions:
Disc: 22mm diameter, 0.7mm thickness
Shaft: 2.35mm diameter, 40mm length
05.13
ORDER CODE: AB712
CUTTING DISCS 50PCS
This set consists of fifty spare Corundum
cutting discs that can be used with (AB712).
Please note: Mounting shaft is not included.
Dimensions:
ORDER CODE: AB698
METAL CUTTING BLADES 3pcs
ALUMINIUM OXIDE GRINDING BITS
4pcs
This set consists of four mounted aluminium
oxide grinding bits. Various shapes for the
widest range of applications. The set consists of the following bits:
Ball shape: 5mm diameter
Gear shape: 6mm diameter
Cylindrical shape: 2.5mm diameter
Cone shape: 7mm diameter
Shaft diameter is 2.35mm.
ORDER CODE: AB705
ORBITAL GRINDING DISCS 10pcs
FLEXIBLE SILICON CARBIDE
POLISHING BITS 6pcs
This is a set of six pieces. It is made of a
flexible plastic compound that contains silicon carbide particles. Ideal for smoothing
and polishing non-ferrous metals, glass,
porcelain, wood and plastics. The set consists of the following pieces:
1 x Cone shape:
5mm diameter, 15mm height
2 x Discs with flattened edge:
22mm diameter, 3.8mm thickness
2 x Discs with 90° edges:
22mm diameter, 3mm thickness
1 x Shaft: 2.35mm diameter, 40mm length
ORDER CODE: AB711
BRASS WIRE CONE BRUSH 2pcs
This set consists of three flexible, spring
steel cutting discs and one mounting shaft.
Dimensions:
Disk thickness: 0.1mm
Small Disc: 16mm diameter
Medium Disc: 19mm diameter
Large Disc: 22mm diameter
ORDER CODE: AB707
DIAMOND CUTTING DISC
This set consists of ten Carborundum orbital
grinding discs and one mounting shaft.
Dimensions:
Disc: 22mm diameter, 3mm thickness
ORDER CODE: AB710
SURFACE FINISHING BITS
Note: These bits are used for
sanding, cleaning or polishing of
surfaces.
SAND PAPER FLAP WHEEL
BRASS WIRE WHEEL BRUSHES
5pcs
This diamond cutting disc is used for cutting
very hard materials like steel, porcelain,
fibreglass and non-ferrous metals.
Dimensions:
ORDER CODE: AB706
GRINDING BITS
Note: These Carborundum bits
are used for grinding work on
hard materials.
This is a set of two pieces. These brass wire
cone brushes are ideal for working on alloys,
copper, precious metals, semi-precious
stones, plastic and wood. Acid proof. Good
conductor of electricity. Electrically neutral.
Suitable for working electronic components.
Dimensions:
Brush: 8mm diameter, 11mm length
ORDER CODE: AB708
This flap wheel is used for sanding concave
curves and inaccessible spots. This flap
wheel is elastic and takes on the shape of
the workpiece. Sand paper grit is 120.
Dimensions:
Abrasive part: 20mm diameter, 10mm height
Shaft: 3mm diameter, 39mm length
ORDER CODE: AB700
05.14
This set consists of five brass wire wheel
brushes and one mounting shaft. These
brushes are ideal for working on alloys, copper, precious metals, semi-precious stones,
plastic and wood. Acid proof. Good conductor of electricity. Electrically neutral and suitable for working with electronic components.
Dimensions:
Brush: 22mm diameter, 2mm thickness
ORDER CODE: AB702
completely isolated from the 230V mains
Ceramic Heating Element Power: 48W max.
built-in heating element temperature sensor
Adjustable Temperature Range:
either switched OFF or ON: 150 - 450°C
Suitable for lead-free soldering
Built-in soldering iron stand and sponge tray
a sponge and spare bit is also supplied
ORDER CODE: AD054
SET OF FELT POLISHERS 3pcs
This is a set of three pieces. Ideal for polishing softer metals like brass, gold and silver.
The set consists of the following bits:
Cylindrical shape: 7mm dia., 15mm height
Cone shape: 8mm diameter, 15mm height
Disc shape: 16mm diameter, 4mm thickness
ORDER CODE: AB703
SOLDERING IRONS
SOLDERING SET
4 PARTS
This soldering set is especially suitable for
soldering electronic components onto PCBs
(printed circuit boards). It consists of the four
main parts that are used for soldering work.
This set consists of the following four parts:
one 25 Watt soldering iron
one desoldering pump
one soldering iron stand
solder wire that is contained in a dispenser
ORDER CODE: AD193
LAB-1 THREE-IN-ONE LAB UNIT
The LAB-1, three-in-one unit, is an economic, space saving solution for the electronics
laboratory and home! It is a perfect solution
for starters and schools.
It consists of the following three parts:
one multimeter,
one power supply and
one soldering iron
Specifications:
Power Supply: 230Vac and one 9V battery
Power Consumption: 70 Watt max.
Mains Power Cable and manual is supplied
PORTABLE,
VARIABLE TEMPERATURE,
GAS SOLDERING IRON
Multimeter Specifications:
This is a digital multimeter with:
3 ½ digit, 7 segment, backlit LCD
Power Supply: 9V Battery (included)
Automatic polarity indication
DC Voltage: 200m/2/20/200/600V
AC Voltage: 200V and 600V
DC Current: 200µ/2m/20mA/200m/10A
Continuity Test: Buzzer sounds if measured
connection resistance is less than 60 Ohm
Transistor Test: NPN or PNP transistors
Diode Test
Data-hold function
Continuity Buzzer
Low battery Voltage Indicator
Input Overload Protected
Input Connections: IEC1010
three 4mm banana sockets
Overvoltage between the terminals and earth
ground: CAT I 600V and CAT II 300V
Testing Leads are also supplied
The Portasol Technic is an economical,
portable, pocket sized soldering iron. Its temperature can be varied up to 400°C. Its heat
output is equivalent to a 10 - 60 Watt soldering iron. It is powered by standard butane
cigarette lighter fuel. The continuous operating time per refill is dependent on the temperature setting and is typically 1 hour. A
protective cap prevents gas flow when it is
put on the soldering iron and it is fitted with a
flint ignitor. The 2.4mm replacement tip,
(AB249), incorporates a catalytic converter
for flame-free soldering. Tips are available in
5 widths.
ORDER CODE: FB826
SOLDERING STATION WITH
CERAMIC HEATER 48W / 230VAC
Power Supply Specifications:
This is a regulated DC power supply with:
Selectable DC Regulated Output Voltages:
3 / 4.5 / 6 / 7.5 / 9 / 12Vdc
Low Ripple Voltage
Maximum Output Current: 1.5A (2A peak)
LED Output Overload Indicator
LED power indication
Output on/off Switch
Output Power Terminals:
two 4mm banana sockets for ‘+’ and ‘-’
Soldering Station Specifications:
This is an adjustable, temperatue-controlled
soldering station with:
Soldering Iron uses a Low Voltage: 24V
05.15
The GB662 temperature controlled soldering
station incorporates a sophisticated temperature regulating circuit that enables the user
to adjust the tip temperature between 150°C
and 420°C. Complete electronic switching
protects voltage and current sensitive components against transient spikes The soldering iron is heated with a ceramic heating element that operates on 24V. A separate soldering iron stand is included.
Dimensions: 160 x 120 x 95mm (without the
stand and soldering iron)
Optional:
Replaceable tips: (AB198) and (AB199)
Replaceable Soldering Iron: (AC573)
ORDER CODE: GB662
SPARE SOLDERING IRON
FOR (GB662)
This is a replacement soldering iron for the
soldering stations GB662.
ORDER CODE: AC573
PROFESSIONAL SOLDERING
STATION 48W / 230VAC
TEMPERATURE CONTROLLED
SOLDERING STATION 48W/230VAC
SOLDERING IRON 30 WATT 230VAC
This is a mains-powered soldering iron.with
a ceramic heating element.
Specifications:
The EB403 temperature controlled soldering Power Rating: 30Watt
station incorporates a sophisticated tempera- Replaceable tip: (AD195)
ture regulating circuit using a temperature
ORDER CODE: AD194
sensor. The tip temperature is adjustable
ELECTRIC SOLDERING GUN
between 150°C and 420°C. Complete electronic switching protects voltage and current
WITH FAST HEATING ELEMENT
sensitive components against transient
30 - 130W / 230VAC
spikes The soldering iron is heated with a
ceramic heating element that operates on
24V. A mountable soldering iron stand is
included. A spare soldering iron, (EB840),
and tips are available.
ORDER CODE: EB403
TEMPERATURE CONTROLLED
SOLDERING STATION 50 W / 230V
This is a professional temperature controlled
soldering station incorporates a sophisticated
temperature regulating circuit using a temperature sensor. It also has a digital temperature display. The tip temperature is
adjustable between 160°C and 480°C.
Complete electronic switching protects voltage and current sensitive components
against transient spikes The soldering iron
is heated with a ceramic heating element
that operates on 24V. A mountable soldering
iron stand is included. A spare soldering iron,
(EB840), and tips are available.
Weight: 2.1kg
ORDER CODE: AB222
SPARE SOLDERING IRON
FOR (EB403) AND (AB222)
This is a gun shaped electric soldering iron.
It has a dual-power ceramic heating element. The switch can be set to “Lo” for normal soldering work on electronic circuits. Set
the switch to “Hi” for fast heating or for soldering work that requires more heat than
usual.
Specifications:
Ceramic Heater with dual-power Rating:
30 Watt with switch in “Lo”-position
130 Watt with switch in “Hi”-position
Replaceable tip: (AD195)
ORDER CODE: AD242
1. Adjustable between 175°C and 480°C.
2. Fine steel tip.
3. Replaceable tip (AA363).
4. Externally mounted ground output.
5. Integrated soldering iron stand.
6. Ideal for general purpose and electronic
use.
7. Handle has firm comfortable grip.
8. 50 Watt 220/240V.
ORDER CODE: SB022
SOLDERING IRON
REPLACEMENT TIPS
AB992 Replacement tip for FB826
1.0mm
SOLDERING IRON 30 WATT 230V
AB249 Replacement tip for FB826
2.4mm
This is a replacement soldering iron for the
soldering stations AB222 and EB403.
ORDER CODE: EB840
1. Fine steel tip.
2. Replaceable tip.
3. Ideal for general purpose and electronic
use.
4. Handle has firm comfortable grip.
5. 30 Watt 220/240V
ORDER CODE: TB001
05.16
AB198 Replacement tip for GB662
0.5mm
AB199 Replacement tip for GB662
1.0mm
SOLDERING STANDS
SOLDERING IRON STAND
GB677 Replacement tip for EB403
0.8mm
used for removing solder from PCB tracks. It
is used by pressing it down against the soldered area with a heated soldering iron tip.
The desoldering braid will transfer the heat
from the soldering tip to the solder and then
absorb the molten solder. The braid is on a
reel, has 2mm diameter and 1.5m length.
ORDER CODE: AB403
DESOLDER PUMP
AB351 Replacement tip for EB403
2.0mm
Components that have been soldered onto a
PCB can be removed by using this pump
and a soldering iron.
ORDER CODE: QB066
FB081 Replacement tip for EB840/AB222
0.4mm
0.8mm
1.6mm
This stand is ideally suited for the soldering
irons (TB001) and (AD194). One cleaning
sponge is supplied.
A spare cleaning sponge: (EB402)
ORDER CODE: AA065
SOLDERING IRON STAND
WITH HOLDER FOR SOLDER
SPARE TIP FOR (QB066)
This is a spare removable tip for the
Desolder Pump (QB066).
ORDER CODE: AB402
PROFESSIONAL
SOLDER TIP CLEANER
GB654 Replacement tip for EB840/AB222
3.2mm
AA363 Replacement tip for SB022
0.8mm
AD195 Replacement tip for AD194 / AD242
EB221 Replacement tip for Oryx 2mm
EB220 Replacement tip for Weller (7)
1.5mm 400°C, 62mm long
fitting part 30mm x 6mm dia.
AB211 Replacement tip for Weller (5)
fitting part 17mm x 5.3mm dia.
AB212 Replacement tip for Weller (9)
fitting part 17mm x 5.3mm dia.
This soldering iron stand has a built-in holder Diameter: 90mm
for one reel of solder wire and one cleaning Spare golden curls, (FB078), can be ordered
sponge. It is ideally suited for the soldering
for the holder.
irons (TB001) and (AD194).
ORDER CODE: FB077
One cleaning sponge is supplied.
SPARE GOLDEN CURL FOR
Spare cleaning sponge: (EB402)
The solder wire is not included.
SOLDER TIP CLEANER
Solder Wire Reels: (MB031) or (MB048)
ORDER CODE: AD196
The spare golden curls for solder tip
cleaner FB077.
ORDER CODE: FB078
SOLDER WIRE
EB402 Cleaning Sponge for solder stand
TOOLS FOR
DESOLDERING AND
SOLDER REMOVAL
DESOLDERING BRAID
Note: Soldering wire with a resin
core
MB031 Solder Wire 500g 0.71mm
MB048 Solder Wire 500g 1.25mm
This is flexible, copper braid (wick) that is
05.17
PB168 Breadboard GL-12N 172x65x9mm
(840 contact points)
QB055 Breadboard GL-10N 172x39x9mm
BREADBOARD ON BASE
WITH POWER POSTS GL-36N
Blister pack that contains 50g of 0.71mm
resin core soldering wire.
ORDER CODE: HB001
CIRCUIT
PROTOTYPING
BREADBOARDS
EB579 Breadboard AD-100 81x41x9mm
This breadboard is mounted on a plastic
baseboard and comes with power terminals.
The power terminals will accept 4mm
banana plugs.
(2420 contact points 4 power posts)
Dimensions: 240x195mm
ORDER CODE: XB034
JUMPER WIRES
STIFF JUMPER WIRE
BLISTER PACKS
contains 200 uninsulated wires
AD205 5.1mm (0.2 inch) Jump Wire Pack
contains 200 Red jumper wires
contains 200 Orange jumper wires
contains 200 Yellow jumper wires
contains 200 Green jumper wires
contains 150 Blue jumper wires
contains 150 Violet jumper wires
contains 150 Grey jumper wires
contains 150 White jumper wires
AD213 25.4mm (1 inch) Jump Wire Pack
contains 100 Brown jumper wires
contains 100 Red jumper wires
contains 75 Orange jumper wires
AD216 102mm (4 inch) Jump Wire Pack
contains 75 Yellow jumper wires
AD217 127mm (5 inch) Jump Wire Pack
contains 75 Green jumper wires
STIFF JUMPER WIRE KITS
Note: These are sets of insulated,
tinned copper, solid core, stiff
jumper wires.
Core diameter is 0.6mm (SWG23)
JUMP WIRE KIT (14 X 5 PCS)
14 Different lengths, 5 wires of each length.
ORDER CODE: EB583
AD197 Power Block with 5 Binding Posts
this attaches to breadboard EB579
(the posts take 4mm banana plugs)
81x30x19mm (15 contact points)
ORDER CODE: EB582
Different Lengths: 2.54mm, 5mm, 7.62mm,
10.16mm, 12.7mm, 15.24mm, 17.78mm,
20.32mm, 22.86mm, 25.4mm, 50.8mm,
101.6mm, 76.2mm and 127mm
Wire Core Diameter is 0.6mm
Box Dimension: 134 x 272mm, 32mm height
ORDER CODE: AD199
AD198 Power Bus AD-4D 81x12x9mm
this attaches to breadboard EB579
(48 contact points)
FLEXIBLE JUMPER WIRES
PB309 Breadboard KH-102N 81x60x9mm
Note: Each blister pack contains
a multiple of stiff jumper wires
that have the same length and
insulation colour. It is used with
solderless breadboards. Jumper
wires are made of insulated,
tinned copper, solid core wire.
Core diameter is 0.6mm (SWG23)
05.18
jumper wire has a stiff, hard pin at each end.
Pin Dimensions: 0.6mm dia. x 7mm length.
ORDER CODE: AD201
100mm FLEXY JUMP WIRE PACK
Note: These are flexible jumper
wires that are used with solderless breadboards. Each jumper
has 11 strands of 0.16mm copper
wire that is very flexible. It has a
stiff, hard, gold-plated pin and
eyelet at each end. The eyelets
are ideal for clipping on oscilloscope probes and makes convenient testing points. Each eyelet has a 2mm hole diameter.
Each pin is 0.6mm thick and
7mm long.
AB332
AB333
AB334
AB335
Flexible
Flexible
Flexible
Flexible
Jumper
Jumper
Jumper
Jumper
Wire
Wire
Wire
Wire
15cm
30cm
45cm
60cm
length
length
length
length
Blister pack that contains 10 flexible jumper
wires. The length of each jumper wire,
excluding the length of pins, is 50mm. Each
ORDER CODE: AD200
AB152 1 Sided Eurocard IC Pattern
tinned tracks, fibreglass
more than 38 x 52, 1.05mm dia.
0.1 inch, 2.54mm spacing
ORDER CODE: AD202
AB153 1 Sided Eurocard Full Line
ORDER CODE: AD203
STRIPBOARD /
VEROBOARD
PRINTED CIRCUIT BOARD
(PCB)
Note: Fibreglass Board (FR4)
Paper Based Board (FR2)
Copper layer is 35 microns thick
MIXED PACK OF PCBs
GB811 1 Sided Dot-grid Board
Gold-plated tracks
38 x 60 holes, paper based
AB154 1 Side Eurocard 3-Hole Islands
QB056 1 Sided Stripboard
Gold-plated tracks
38 x 60 holes, paper based
05.19
A mixed pack that contains different PCBs.
PCBs are plain, copper-laminated single and
double sided. Weight: approximately 500g.
ORDER CODE: AB636
FIBREGLASS SINGLE SIDED 0.51MM per is removed from the board
except where protected by varnish.
Etching solution: 400g ferric
chloride per litre of water
Shelf life of the board is more
than a year at normal room temperature.
AB239 100x160x0.51mm FR4
AD189 160x200x0.51mm FR4
the board lightly up and down within the
solution. Complete development is achieved
within about 45 seconds. It is necessary to
rinse the board under flowing tap water after
development has been completed.
ORDER CODE: AC985
HEXAHYDROUS /
FERRIC CHLORIDE
GRANULES 400G
SINGLE SIDED BOARD
GB810 100x160mm FR2 paper based
FIBREGLASS SINGLE SIDED 1.55MM AC983 100x220mm FR4 fibreglass
FIBREGLASS PRESENSITIZED
DOUBLE SIDED BOARD
AC984 100x220mm FR4 fibreglass
PCB ETCHING SET
QB057 100x160x1.55mm FR4
AD190 160x200x1.55mm FR4
AD191 200x320x1.55mm FR4
PCB ETCH RESISTANT
MARKER PEN
PRESENSITIZED
PRINTED CIRCUIT BOARD
Note: The boards are protected
against unwanted light exposure,
dirt and scratches by a special,
coloured, adhesive layer that
should be peeled off only just
before use.
Presensitized: copper layer is
covered with Ultra Violet light
sensitive, positive working varnish 5 µm thick.
Fibreglass Board (FR4) and
Paper Board (Pertinax) (FR2)
1.5mm thick. Copper layer 35
micron.
Use a transparency with solid
black artwork to create a positive
image of varnish on the copper
layer of the board. Eventually
black on the transparency will
become copper on the etched
board.
Exposure Time: 5 minutes with
UV light:
use one or more of blacklight
(GB494).
Insure good contact between the
artwork and the board.
Development solution: 10g caustic soda per liter of water.
During the etching process cop-
Dissolves or etches the unprotected copper
layer parts on a PCB. Make a solution by
mixing 1 part of the chemical with 2 parts of
water. Sufficient to make 1 Litre.
ORDER CODE: PB149
This starter set is ideal for etching printed
circuit boards (PCBs). It contains:
3 Single sided bare copper FR2 PCBs:
1 x PCB: 100 x 160mm
2 x PCB: 80 x 100mm
1 Presensitized single sided FR2 PCB:
black adhesive layer: 80 x 100mm
Developer for presensitized PCB
Etching Chemical for removing copper
1 Pair of plastic Tweezers
1 Plastic Etching Bowl
and comprehensive, illustrated Instructions
ORDER CODE: GB758
The pen is used to draw the circuit traces
directly on the PCB. This is a easy way to
make your own PCB’s.
ORDER CODE: MB057
POSITIVE 20 PHOTORESISTANT
FOR PCB PRODUCTION
PCB ACCESSORIES
Ultra Violet light sensitive Positive 20 is used
for producing PCB with a photographic
process. A positive of the circuit layout is
used to produce the PCB.
ORDER CODE: PB280
CONDUCTING SILVER
SOFTWARE
This Silver-conductive varnish conducts electricity very well and adheres to glass, circuit
boards, ceramics etc. It is ideal for repairing
window alarm loops, window antennas, window heatings and circuit boards.
Conducting Capacity: 0,02 to 0,1 Ohm/cm²
Contained in glass bottle with
Outer Dimensions: 10mm dia. 49mm long
Silver Contents of the bottle approx. 3g
ORDER CODE: GB756
DEVELOPER FOR
PRESENSITIZED PCBs
Positive developer for presensitized PCBs.
One packet of developer is mixed with one
litre of water. One litre of the solution is sufficient for about 0.5 m² of board. The development process should be assisted by tilting
05.20
ELEKTOR CD-ROMS
ANNUAL VOLUME OF ELEKTOR
MAGAZINES ON CD-ROM
Note: Each annual Elektor CD
contains all the editorial articles,
except the News and New
Products sections, in the Volume
of editions of the English Elektor
magazine published during that
year. Using Acrobat Reader (supplied on the CD-ROM). Articles
are presented in the same layout
as originally found in the magazine.
Features:
Produce hard copy of PCB layouts at printer resolution,
Adapt PCB layouts using your
favourite graphics program,
Zoom in / out on selected PCB
areas,
An extensive search machine is
available
to locate keywords in any article,
including those contained on
previous annual CD-ROMs
Ideal companion for science projects
Export circuit diagrams and
illustrations to other programs
CD ELEKTOR 2001
CD ELEKTOR 2005
CD ELEKTOR 1996
NEW: HTML overview for Macintosh
Operatin System and Linux users
ORDER CODE: GB541
CD ELEKTOR 2002
NEW Features:
The installation program now allows Elektor
year volume CD-ROMs you have available to be copied to hard disk, so you do
not have to eject and insert your CDs
when searching in another year volume.
Simply follow the steps indicated with the
program DiskMirror.
HTML overview for Macintosh Operatin
System and Linux users
ORDER CODE: AD166
OTHER ELEKTOR CD-ROMS
ORDER CODE: GB533
SOFTWARE TOOLBOX 1
CD ELEKTOR 1997
NEW: HTML overview for Macintosh
Operatin System and Linux users.
ORDER CODE: AB092
CD ELEKTOR 2003
ORDER CODE: GB534
CD ELEKTOR 1999
ORDER CODE: AB187
CD ELEKTOR 2004
ORDER CODE: GB539
CD ELEKTOR 2000
ORDER CODE: AC607
ORDER CODE: GB540
05.21
This is the first CD-ROM in the TOOLBOX
series. It contains essential information and
tools needed by every electronics enthusiast
for programming the microprocessor-driven
hardware that he / she is developing.
It covers the following topics:
- programming tools for the developer (sdCC
for 8051 microcontrollers and the GNU environment for 68HC11 microcontrollers)
- subroutines for arithmetic operations on
signed and unsigned numbers and for DSP
(add, substract, multiply, divide, BCD, fixed
point, floating point, square root, fft, etc.)
- serial communication (RS232, RS485, I2C,
USB and more)
- infrared communication (theory, practical
examples, useful tips)
- how to implement A/D and D/A conversion
on various microcontrollers
- how to achieve passive and active filtering
on various microcontrollers
- how to interface LCD displays with various
microcontrollers
- miscellaneous, mainly I/O related topics,
including battery charging, buffering, dialling,
fuzzy logic, keypad decoding, measuring,
motor driving, sorting, etc.)
- overview of the IEEE-754 standard for
floating-point number representation, and
- overview of the MIDI interface, with emphasis on the less known MIDI SHOW CONTROL protocol, where the MIDI interface is
used to control multimedia gear.
ORDER CODE: AC773
SOFTWARE TOOLBOX 2
Commander) and other ingenious software
covering functions like file renaming.
ORDER CODE: AB091
THE AUDIO COLLECTION 2
ECD ELEKTOR'S
COMPONENTS DATABASE
The second Toolbox CD-ROM contains a
vast collection of carefully selected software
tools for the electronics enthusiast.
In your profession or hobby, how often did
you experience that your project failed to
reach the target in time because essential
information was missing? Toolbox 2 offers
new inroads to obtain information you just
can't do without. This new CD-ROM contains
software tools for, and information about,
microcontrollers. However, just being aware
of the existence of a microcontroller is often
not sufficient - available data often needs to
be extended with facts and figures about the
right memory devices and communication
channels.
That's why this CD-ROM gives specific
attention to technical documentation (specifications, application notes, standards) about
protocols (DiSEqC - Digital Satellite
Equipment Control), field buses (including
LON and HART), as well as modern information carriers (Smart Media, CompactFlash,
SD card, etc.) which find increasing use.
The hardware side of things is not forgotten
either - Toolbox 2 contains data on connectors, cables and adapters (audio/video,
GSM, memory, networks, parallel, serial,
keyboard/mouse).
The CD-ROM also contains a large number
of useful Internet addresses.
ORDER CODE: AB090
Elektor's first interactive Databank CD-ROM
has just been published!
This CD-ROM is a must-have for all electronics enthusiasts.
ECD is Windows XP compatible
The program package consists of four databanks covering ICs, transistors, diodes and
optocouplers. A further nine applications
cover the calculation of, for example, zener
diode series resistors, voltage regulators,
voltage dividers and AMV's. A colour band
decoder is included for determining resistor
and inductor values.
The ECD gives you easy access to design
data for over 5,300 ICs, over 22,500 bipolar
transistors, over 4,900 FETs, thyristors and
triacs, just under 25,000 diodes and 1,800
optocouplers.
All databank applications are fully interactive,
allowing the user to add, edit and complete
component data.
ORDER CODE: AB093
This CD contains more than 75 audio circuit
designs from the past five year volumes of
Elektor Electronics magazine. The circuits
are Ideal for home construction.
Articles on the CD-ROM cover:
test & measurement equipment,
amplifiers,
digital audio and
loudspeaker technology
Highlights include:
Audio-DAC 2000,
Audio-ADC 2000 and
the IR-S/PDIF Transmitter and Receiver
Using the included Acrobat Reader you are
able to browse the articles on your computer,
as well as print texts, circuit diagrams and
PCB layouts.
ORDER CODE: AD265
EDUCATIONAL CD-ROMS
DIGITAL ELECTRONICS
THE AUDIO COLLECTION 1
FREEWARE & SHAREWARE 2003
This CD-ROM is an extensive introduction
into the principles and practice of digital
electronics and discusses a.o. binary and
hexadecimal applications, fundamental
gates, monostables, JK- and D-type flipThis CD contains more than 75 audio circuit flops, equivalent logic, specialized logic functions (including parity checkers, multiplexers,
designs from the past five year volumes of
half and full adders, scrambling circuits),
Elektor Electronics magazine. The circuits
clocks, counters, BCD, shift registers, A/D
are Ideal for home construction.
Some examples of circuits that are included: and D/A converters, memories and an introduction to microprocessor-based systems. A
surround-sound decoder,
Just like previous editions, the crop of 2003
large number of common digital ICs and
compact audio amplifier,
supplies useful programs that can be run on
photographs of digital circuit applications is
sampling rate converter,
various operating systems, linked directly or
also included.
battery powered preamplifier,
indirectly to electronics in general, programFeatures:
the Titan 2000
ming, microcontrollers for sure, but also to
Circuit simulation carried out on-screen
Using the included Acrobat Reader you are
many allied areas.
able to browse the articles on your computer, Unique virtual laboratories
Besides the usual sections (CAD, Audio,
Editable worksheets
Calculation Tools, Programming, Simulation, as well as print texts, circuit diagrams and
Full audio commentary
PCB layouts.
etc.) the 2003 edition of the Freeware &
Over 20 links to pre-designed electronics
Shareware CD-ROM contains a collection of
ORDER CODE: AC890
workbench circuits and crocodile clips
'must-haves' which are not specifically linked
to electronics, but valuable when it comes to
ORDER CODE: FB124
writing or manipulating programs and files
(assembly code, C, Delphi and others). This
collection comprises utilities like xnView (for
graphics file visualisation), dirprint (file, directory and subdirectory listing), Total
Commander (previously known as Windows
05.22
ROBOTICS ACTUATORS & SENSORS MECHANICAL
3)Autorouter - this takes a lot of routine circuit layout work away from you. It can handle boards of up to 16 layers and the smallest routing grid is 0.02mm. Automatic routing
can be applied to individual signals, groups
of signals or to all signals that have to be
routed.
-CAM Processor: matrix, laser, postscript
printers and pen plotters. Also write Gerber,
Excellon and Sieb&Meyer files.
Hardware Requirements:
IBM compatible PC 586 (or higher)
Windows 95/98/NT4/2000/XP
Mouse
RAM: at least 32MB
Hard Disk: at least 40MB of free space.
3.5’’ Stiffy Drive for reading the license file
In Robotics, electronics meets information
technology as well as mechanical engineering. The meeting results in a boundless
AA449 EAGLE Light for 1 user,
experimental field. Do you want to explore
Includes all three modules
it? For beginners the shortest way is along
Max. 1 schematic sheet
the kits line, while experienced users and
Max. 2 signal layers
programmers are best served by DIY con(Max. PCB size 100 x 80mm)
struction. Both options are available on this
CD-ROM thanks to a large collection of
GB747 EAGLE Non-profit for 1 user,
datasheets, software tools, tips and tricks,
addresses, Internet links to assorted robot
constructions and general technical informaNon-profit, declaration is required
tion. All aspects of modern robotics are cov(Max. PCB Size 160x100mm)
ered, from sensors to motors, mechanical
parts to microcontrollers, not forgetting
AC012 EAGLE Standard 4.1 for 1 user,
matching programming tools and libraries for
signal processing. Robots built from LEGO®
Max. 99 schematic sheets
bricks also get a fair amount of attention.
ORDER CODE: AC608
(Max. PCB size 160 x 100mm)
EAGLE PCB DESIGN
SOFTWARE
One 4700µF smoothing capacitors
Use only correctly rated transformer
Maximum Transformer Voltage: 16Vac
ORDER CODE: AA290
25V-0-25V DC
DUAL POWER SUPPLY MODULE
Features:
Screw terminal inputs and outputs
6 Amp bridge rectifier
Two 4700µF smoothing capacitors
ORDER CODE: AA292
50V DC POWER SUPPLY MODULE
AC011 EAGLE Professional 4.1 for 1 user,
Max. 99 schematic sheets
(Max. PCB size 1600 x 1600mm)
POWER
SUPPLIES AND
INVERTERS
RECTIFYING
POWER SUPPLIES
The Eagle software is an easy to use, yet
powerful tool for designing printed circuit
Note: Each of these power supboards (PCBs). The name EAGLE is an
plies will accept an AC input voltacronym, which stands for:
age from a transformer and rectiEasily Applicable Graphical Layout Editor
fy (convert) it to give a DC output
You can use Eagle to create PCB films and
documentation that satisfy the highest
voltage. These power supplies
demands on quality. There is no need to
have to be used together with
compromise either quality or size.
suitable transformers
Features:
-Eagle software is very easy to use, in spite
25V DC POWER SUPPLY MODULE
of all its facilities.
-Schematic, Layout and Component editors
have identical user interfaces.
-Includes a full set of parts (components)
libraries.
-Easily create your own parts.
-The program includes three modules:
1)Schematic Creator / Editor - used for making a schematic representation of an electronic circuit using standard component symbols.
2)PCB Layout Editor - used for designing the
PCB artwork that consists of the actual cop- Features:
per signal tracks, component footprints, con- Screw terminal inputs and outputs
nection pads, etc.
05.23
Features:
One 4700µF smoothing capacitors
Maximum Transformer Voltage: 30Vac
ORDER CODE: AA291
50V-0-50V DC
DUAL POWER SUPPLY MODULE
Features:
Two 4700µF smoothing capacitors
ORDER CODE: AA258
PLUG IN UNREGULATED
AC TO DC ADAPTORS
FIXED VOLTAGE
REGULATED
POWER SUPPLIES
FIXED 13.8VDC / 10A
POWER SUPPLY
Note: European Plug (2 round
pins)
Input: 230Vac / 50 Hz
Thermal cut-off
DC plug: 2.1 x 5.5mm
Cord: 1.85m
GB836 9Vdc / 500mA (non-regulated)
AB006 9Vdc / 800mA (non-regulated)
AC672 9Vdc / 1000mA (non-regulated)
AC673 12Vdc / 1000mA (non-regulated)
AB510 15Vdc / 1000mA (non-regulated)
GC304 24Vdc / 1000mA (non-regulated)
UNIVERSAL ADJUSTABLE
AC TO DC ADAPTORS
Note: Input Voltage: 220Vac
Selectable Output Voltages:
(non-regulated)
3 / 4.5 / 6 / 7.5 / 9 / 12Vdc
Multi-connector
Polarity Changer
Cord: 1.5m
AA729 500mA, 90 x 55 x 46mm
AA730 1000mA, 110 x 62 x 54mm
Features:
Fuse-protected
Housing: white-grey plastic
Specifications:
Output Voltage: 13.8Vdc (regulated)
Ripple Voltage: 120mV
Output Current Range: 0 to 10A (12A max.)
Power Connections: 4mm banana sockets
Weight: 4.0kg
ORDER CODE: AB408
FIXED 13.8VDC / 30A
POWER SUPPLY
Features:
Fuse-protected
Housing: white-grey plastic
Specifications:
Output Voltage: 13.8Vdc (regulated)
Ripple Voltage: 150mV
Output Current Range: 0 to 30A (32A max.)
Power Connections: 4mm banana sockets
Weight: 9.3kg
ORDER CODE: AB259
power-hungry heat-producing
mains adapters. These adapters
use state-of-the-art switching
mode power supplies and feature
major advantages such as:
cooler running
regulated DC output
short-circuit / overload protection
compact design
very low current consumption
Features:
Universal Input Voltage Range:
90 - 264Vac (47 - 63Hz)
Continuous Short-circuit
Protection
High Efficiency: 85%
meets UL, CSA, TUV, CE standards
Ideal as spare power supply for
portable PC
SWITCH MODE ADAPTER 12VDC
Specifications:
Output Voltage: 12Vdc (regulated)
Ripple and Noise: 1%
Voltage Accuracy: ± 2%
Line Regulation: ± 1%
Load Regulation: ± 5%
Input Characteristics:
Input Voltage: 90 - 264Vac (47 - 63Hz)
Inrush Current: 50A max. @ 264Vac
Input to Output Insulation: 4242Vdc
Leakage Current: 0.25mA
Output characteristics:
Short-circuit Protection: continuous
Operating Temperature: 0°C to +40°C
Connector: 2.1 x 5.5mm
Cable Length: ±190cm
Please Note:
The IEC Mains Cable (EB003) is required
ORDER CODE: AB357
VARIABLE VOLTAGE
REGULATED
POWER SUPPLIES
VARIABLE DC LAB
POWER SUPPLY 0-15V/3A
70W SWITCH MODE
POWER SUPPLIES
Note: Get rid of those bulky
05.24
Features:
LCD displays with backlight for voltage and
current
Adjustable voltage and current
Fuse-protected
Housing: plastic front panel / other panels
made of steel
Output power connectors: IEC1010
(4mm banana sockets / binding posts)
Specifications:
Output Voltage Range: 0-15V adjustable
Output Current Range: 0-3A adjustable
Ripple Voltage: 1.0mV(rms)
Weight: 3.5kg
ORDER CODE: EB404
VARIABLE DC LAB
DUAL POWER SUPPLY
2 X 0 - 30V & 5V / 2 X 0 - 10A
VARIABLE DC LAB
POWER SUPPLY 0-30V/10A
Features:
This power supply has two power sections
that can either be used seperately or be
connected in series or in parallel
Four LCD Displays: two for voltage and two
for current
Protection mode: current limit set with knob
Fuse-protected
made of steel
Features:
Specifications:
Two 7-segment LED displays for voltage and
current
Fixed Output: 5Vdc / 10A maximum
There are coarse and fine adjustment knobs
Output Voltage Range: 2 x 0-30V adjustable
for voltage and current
Output Current Range: 2 x 0-10A adjustable
Protection mode: current limit set with knob
Ripple Voltage: 1mV
Fuse-protected and short-circuit protected
Weight: 11.6kg
made of steel
ORDER CODE: AC953
Specifications:
Output Voltage Range: 0-30V adjustable
Output Current Range: 0-10A adjustable
Ripple Voltage: 1.0mV
Ripple Current: 5mA
Weight: 12.0kg
ORDER CODE: AC995
VARIABLE DC
VOLTAGE SUPPLY 3-15V/1.5A
VARIABLE DC LAB
DUAL POWER SUPPLY
2 X 0 - 30V / 2 X 0 - 3A
Features:
Analogue Displays: voltage and current
Protection mode: current-limit set with knob
Output Power Connections: IEC1010
Specifications:
Output Voltage Range: 2 x 30V (adjustable)
Output Current Range: 2 x 3A (adjustable)
Ripple Voltage: 1mV
Ripple Current: 5mA
Weight: 9.3kg
ORDER CODE: AB062
This variable, DC voltage power supply is
ideal for low power loads that require a specific fixed, stabilized voltage.
Specifications:
Short circuit-proof
Input Voltage Range: 6 - 28Vdc
Output Voltage Range: stabilized 3 - 15Vdc
Note: the input voltage must always be at
least 3V larger than the output voltage
Power Dissipation: 10W with 60x60x20mm
ribbed heat sink (not included) and 3W max.
without a heat sink
ORDER CODE: GB752
05.25
UNIVERSAL SWITCH MODE
ADAPTER 230VAC / 120W
This is an universal, switch mode, power
supply with a regulated DC output. This
power supply is ideal for notebook computers and digital electronic devices. An output
voltage can be selected from 15 to 24Vdc. It
is compact, efficient and has low output ripple voltage. It has six detachable, DC power
plugs. It is short-circuit- and overload-protected.
Specifications:
15, 16, 18, 19, 20, 22 or 24Vdc
Output Current:
6A max. for 15, 16, 18, 19 or 20Vdc ouput
5A max. for 22 or 24Vdc output
Output Power: 120W max.
Output Connecting DC Plugs:
straight types: 6.5x4.5, 6.3x3.0, 4.75x1.7mm
right-angled types: 5.5x2.5, 5.5x2.1mm
Please Note:
The IEC Mains Cable (EB003) is required
ORDER CODE: AB406
INVERTERS
Note: Used for computers, televisions and VCR’s, home stereos,
CD players
lighting fixtures
fans and fax machines
medical instruments
communication systems
Features:
Soft-Start series: compact dimensions
advantage of soft-start series:
can start inductive loads (e.g.
drill)
modified sine wave, (Square
Wave), output
output is Short-Circuit Protected
Low-Battery Alarm
Low-Battery Shutdown Function
Thermal and Overload Protection
Child-Safe
12VDC TO 230VAC POWER
INVERTER SQUARE WAVE 150W
Specifications:
Supply Voltage: 12Vdc (10-15V)
No Load Current: 430mA max.
Power Socket Outlet: spring earth type
Please note: the inverter requires one 2 Pin
European Power Plug (GB829) or (GB830)
Rated Output Power: 150W
Weight: 0.8kg
ORDER CODE: EB924
Weight: 3.15kg
ORDER CODE: AB193
IN-CAR REGULATED DC STEPUP
SWITCH MODE ADAPTER 120W
VOLTAGE CONVERTERS
24VDC TO 12VDC CONVERTER
1.1A MAX.
Specifications:
Supply Voltage: 12Vdc (10-15V)
Please note: the inverter requires one 2 Pin
European Power Plug (GB829) or (GB830)
Weight: 1.0kg
ORDER CODE: FB484
This module converts a 24Vdc input to
12Vdc. This module may be used in a lorry
with 24V batteries to power 12Vdc devices.
The maximum load current per module is
1.1A. Several modules may be connected in
parallel to increase the current output.
ORDER CODE: GB774
3A MAX.
This is a regulated DC, stepup, switch mode
power supply. It is ideal for use within a car
that has a 12Vdc power system. Now you
can operate your favourite electronic gear in
your car. Equipped with plugs that can be
used virtually anywhere. They can be connected with your car’s cigarette plug (with
neg. ground). Ideal for notebook computers
and digital electronic devices. It is fuse-,
short-circuit- and overload-protected with
thermal cut-off.
Specifications:
Input Voltage: 12 - 16Vdc
15, 16, 18, 19, 20, 22 or 24Vdc
Output Current:
6A max. for 15, 16, 18, 19 or 20Vdc ouput
5A max. for 22 or 24Vdc output
Output Power: 120W max.
Output Connecting DC Plugs:
straight types: 6.5x4.5, 6.3x3.0, 4.75x1.7mm
right-angled types: 5.5x2.5, 5.5x2.1mm
ORDER CODE: AB358
STEPUP DC VOLTAGE CONVERTER
6 - 12VDC TO 11 - 26V
Specifications:
Supply Voltage: 12Vdc (10-15Vdc)
No Load Current: 1.2A max.
Fuse: 4 x 35A fuse, 4 x (AB194)
Please note: the inverter requires two 2 Pin
European Power Plugs (GB829) or (GB830)
Weight: 3.15kg
ORDER CODE: AB192
Specifications:
Supply Voltage: 24Vdc (20-30Vdc)
Fuse: 2 x 30A fuse, 2 x (AA639)
Please note: the inverter requires two 2 Pin
European Power Plugs (GB829) or (GB830)
This module converts a 24Vdc input to
12Vdc. This module may be used in a lorry
with 24V batteries to power 12Vdc devices.
The maximum load current per module is
3A. Short circuit-proof. Requires a ribbed
heat sink 50 x 100 x 30 mm at full load.
ORDER CODE: GB782
20A MAX.
This module takes a DC input voltage and
gives a DC output voltage that is nearly double the input. With an additional linear potentiometer of 4.7k (HB166) one can limit the
output voltage within a preset lower value.
The maximum input voltage is 14.5Vdc. The
output voltage decreases linearly with
increase of load current. Load currents
This DC-to-DC voltage converter changes a should preferably not exceed 1A.
24Vdc input to 12Vdc output. It may be used
ORDER CODE: GB781
in a lorry, with 24V batteries, to power 12Vdc
SOLAR POWER DC TO DC
devices.
CONVERTER
Specifications:
Input Voltage: 24Vdc
Output Voltage: 12Vdc
Maximum Output Current: 20A
Fuse-Protected
Output Power Connectors:
ORDER CODE: AC918
05.26
This module takes a low DC voltage input,
(0.3 to 0.5Vdc), from a solar cell and converts it to a higher stabilized output voltage.
The output voltage is just larger than 12Vdc
at a load current of 50mA. Use a 12V, 0.5W
Zener diode for 12V voltage regulation. It is
ideal for low current battery charging.
ORDER CODE: GB790
dimensions : 57 x 57 x 7mm
ORDER CODE: GB765
SOLAR CELL 2V / 200MA
77X21X3.0mm
SOLAR PANELS
AND ACCESSORIES
Note: Solar cells and panels are
used to convert light energy into
electrical energy. Solar cells can
supply electric current to an electrical load only while light is
being shined onto the light sensitive area of the cell. Solar panels
should be mounted in a position
where they will receive maximum
sunlight.
voltage : 2V
current : 200mA
connections : leads
dimensions : 66x 95 x 6mm
ORDER CODE: FB118
SOLAR PANEL 13.5V / 4.7W
352X338X16mm
SOLAR CHARGING CONTROLLER
12VDC / 5A MAX.
This module is an electronic switch that is
used in a solar powered battery charging
system. This module electrically connects
the solar cell(s) to a 12V lead acid battery
while charging. This module disconnects the
charging current once the battery is fully
charged. A low-loss MOS transistor is used
for switching the charging current.
Please note: You must directly connect the
module’s battery leads to the 12V battery
terminals, if possible. Use a 5 Amp fuse to
protect the module.
Specifications:
Input Current: max. 5A
Input Voltage from Solar Cells: 14 to 22Vdc
Connecting Voltage: less than 13.0Vdc
Disconnecting Voltage: larger than 13.4Vdc
LED Indicators:
orange LED “charging”
green LED “full” when not charging
Own Power Consumption: max. 3.9mA
Fuse: 5A fuse (AA951)
Fuse Holder: in-line type (FB471)
ORDER CODE: GB787
This solar panel can be used to trickle
charge 12V lead acid batteries of a vehicle
or boat. It is also ideal for powering remote
security sensors, low power transmitters, etc.
Features:
It is double glass lamination for protection,
weather-resistant,
built-in indicator light that is on while it is
charging a battery.
Specifications:
Output Voltage: 13.5V
Output Current: 350mA
Output Power Rating: 4.7W
Connections: 3m leads with crocodile
battery clamps and cigarette lighter plug
Colour of Casing: grey
ORDER CODE: AD061
SOLAR CELL 0.5V / 800MA
voltage : 0.5V
current : 800mA
connections : leads
05.27
05.28
HARDWARE
MISCELLANEOUS
ADHESIVE RUBBER FEET
MOTOR GEAR / PULLEY
PACK OF 10pcs
COMPRESSION AND TENSION
SPRINGS 30pcs
AB349 Round shape 10.7 dia. x 5.2mm
the packet contains 20 pieces
AB648
A mixed pack that contains 30 springs of the
compression and tension type.
ORDER CODE: AB648
ADHESIVES
AB350 Square shape 9.7 x 9.7 x 2mm
the packet contains 10 pieces
GROMMETS
Clear, all purpose adhesive. Formulated for
bonding china, pottery, glass, wood, leather
and most plastics. Ideally suited for sticking
wires to walls, ceilings and more. (Do not
use on enamel painted surfaces). Apply
adhesive, bring surfaces together, separate
surfaces until tacky then press the surfaces
firmly together.
50ml Tube.
ORDER CODE: MB076
TAPE
AA695 Grommet 3.2mmØ hole fit 1.6mm
thick panel 4.8mmØ hole
FB705 Grommet 4mmØ hole fit 1.6mm
thick panel 8mmØ hole
GB521 Grommet 6.3mmØ hole fit 1.6mm
thick panel 9.5mmØ
AA938 Grommet 8mmØ hole fit 1.6mm
thick panel 11mmØ hole
A pack that contains 10 clear nylon spur
gear / pulleys. It can be used as a pinion,
(smaller driving gear), when mounted onto a
2mm shaft of an electric motor. It will mesh
perfectly with all the advertised red gears.
Each gear / pulley has a removable, tight fitting ring that is pushed onto the side shaft of
the gear. This ring is used to adjust the pulley’s belt contact width.
Specifications:
Number of Cogs (Gear Teeth) per Gear: 10
Meshing Radius of Gear: 4.5mm
Gear Dimensions:
Outer Diameter: 12mm
Width: 4mm
Hole Diameter for Shaft: 2mm
Belt Contact Diameter of Pulley: 5mm
Maximum Belt Contact Width: 3mm
Total Length: 11mm
Hint:
This gear / pulley can be used with any of
the following DC permanent magnet motors:
Motor 1.5 to 3Vdc 10 000rpm: (AB214)
Motor 2.4 to 6Vdc 11 400rpm: (AA902)
ORDER CODE: AC840
GEAR PACK
PACK OF 50pcs
GEARS AND PULLEYS
Note: Double sided foam tape
AB074 5m x 18mm x 1.2mm
EB189 Insulation Tape Black 20m
MOTOR MOUNTING CLIPS
PACK OF 10pcs
A pack that contains 40 spur gears and 10
coupling shafts. All the parts are made of
red, hard plastic.
Gears are supplied in 4 different sizes and
10 gears of each size.
Four Gear Sizes:
15 Toothed Spur Gear:
A pack that contains 10 plastic motor clips.
Width: 6mm
Each clip can be used to mount a round, DC
permanent magnet motor. Please note that
the motor is not included.
Dimensions:
Outer Diameter: 31.8mm
Clips onto a round motor with Diameter:
Width: 6mm
20 - 24mm
Mounting Base: 25 x 39mm
Height: 24.5mm
Meshing Radius of Gear: 22mm
ORDER CODE: AC892
Width: 6mm
06.1
Width: 6mm
PULLEY PACK
PACK OF 30pcs
Crown Gear:
Coupling Shaft:
This gear is meant to be used together with
It is used to connect 2 gears together axially.
the bevel gear. The axes of rotation must
Connecting Distance: 8mm
cross each other at a right-angle.
Number of Gear Teeth per Gear: 60
Meshing Radius with Bevel Gear: 28mm
ORDER CODE: AC834
height: 15mm
SPECIALIZED GEAR PACK
PACK OF 40pcs
ORDER CODE: AC835
REDUCERS
PACK OF 10pcs
A pack that contains 40 specialized gears.
The gears are made of red, hard plastic.
Four different types of gears are supplied
and 10 gears of each type.
Worm Gear:
12 Gear Teeth per 37mm Gear Length
Length: 38.6mm
Toothed Rack Gear:
This gear will mesh perfectly with all the
advertised red gears, except the worm gear.
48 Gear Teeth per 150.3mm Gear Length
Length: 150.3mm
Width: 5.5mm
Height: 11mm
A pack that contains 10 red, plastic reducers.
Often it is required to reduce the size of an
axial hole in a gear or pulley. It can be done
by plugging a reducer, which has a smaller
hole size, into the over-sized hole. Each
reducer has a 2mm diameter hole and fits
tightly into a 4mm diameter hole.
Dimensions:
Length of Fitting Part: 5.7mm
Outer Diameter of Fitting Part: 4.1 - 4.15mm
Hole Diameter: 2mm
Skirt Diameter: 7.3mm
Total Length: 8mm
Hint:
This reducer fits onto the shaft of any of the
following DC permanent magnet motors:
Motor 1.5 to 3Vdc 10 000rpm: (AB214)
Motor 2.4 to 6Vdc 11 400rpm: (AA902)
ORDER CODE: AC839
GREEN, RIGID, PLASTIC RODS
PACK OF 50pcs
Bevel Gear:
Number of Gear Teeth per Gear: 20
Meshing Radius with Spur Gear: 10.3mm
Meshing Radius with Crown Gear: 8.6mm
height: 14.2mm
A pack that contains 50 green, rigid, hollow,
plastic rods. These rods can be used to construct various structures, for example building a model of a bridge, car’s frame, etc.
Each rod can be used as a fixed shaft for all
the advertised pulleys, wheels and gears
that have a shaft hole diameter of 4mm.
Dimensions:
Outer Diameter: 4 - 4.1mm
Hole Diameter: 2.1mm
Length: 450mm
ORDER CODE: AC891
06.2
A pack that contains 30 yellow, hard, plastic
pulleys. Pulleys come in three different sizes
and ten pulleys of each size is supplied.
Three Pulley Sizes:
29mm Pulley:
Width: 8mm
Belt-Contact Diameter of Pulley: 25mm
Maximum Belt-Contact Width: 3mm
39mm Pulley:
Width: 8mm
Belt-Contact Diameter of Pulley: 35mm
49mm Pulley:
Width: 8mm
Belt-Contact Diameter of Pulley: 45.3mm
ORDER CODE: AC836
BLACK PULLEY BELT 10m
This is round, black, elastic, non-sticky, pulley belt that is sold in a length of 10 meters.
It can be wound around the outer circumference of two or more pulleys.
Dimensions:
Diameter under Tension: 1.5mm minimum
Diameter when Relaxed: 1.7mm maximum
ORDER CODE: AC893
48mm PLASTIC WHEEL
PACK OF 50pcs
A pack that contains 50 black, hard plastic,
disc shaped wheels.
Dimensions:
Diameter: 47 - 48mm
Thickness: 5.5mm
Hole Diameter for Shaft: 4 - 4.2mm
ORDER CODE: AC841
69mm PLASTIC WHEEL
PACK OF 50pcs
NUTS
AND BOLTS
MIXED PACK WITH SCREWS
AND ACCESSORIES 250g
A pack that contains 50 black, hard plastic,
disc shaped wheels.
Dimensions:
Diameter: 68 - 69.5mm
Thickness: 5.5mm
ORDER CODE: AC842
36mm RUBBER WHEEL
PACK OF 50pcs
screw hole at each end.
Male-to-female type has a bolt at
one end and a screw hole at the
opposite end.
METAL
FB134
FB135
FB136
FB137
FB138
female-female
female-female
female-female
female-female
female-female
FB141
FB142
FB143
FB144
FB145
FB146
male-female
male-female
male-female
male-female
male-female
male-female
M3
M3
M3
M3
M3
M3
M3
M3
M3
M3
M3
L5 distance bolt
L10 distance bolt
L15 distance bolt
L20 distance bolt
L30 distance bolt
L5 distance bolt
L10 distance bolt
L15 distance bolt
L20 distance bolt
L30 distance bolt
L40 distance bolt
PVC PLASTIC
AC769 a packet that contains 20 pieces of
male-female M3 L10 distance bolts
A mixed pack that contains screws and
accessories. Weight: approximately 250g.
ORDER CODE: AB633
STEEL
SPACERS
A pack that contains 50 black, firm rubber,
realistic looking wheels.
Dimensions:
Diameter: 35.5 - 36mm
Width: 14.5mm
ORDER CODE: AC838
54mm RUBBER WHEEL
PACK OF 50pcs
AD152 Hexagonal Nut M3
AD153 Flat Washer M3
Note: These are black, cylindershaped, plastic spacers.
AC767 Plastic Spacer length 5mm,
inner dia. 3.5mm, outer dia. 7mm
AC768 Plastic Spacer length 10mm,
inner dia. 4mm, outer dia. 7mm
AD154 Bolt M3x8mm Slotted Cheese Head
DISTANCE BOLTS
ENCLOSURES
A range of enclosures specifically manufactured for the
Electronics industry.
A pack that contains 50 black, firm rubber,
realistic looking wheels.
Dimensions:
Diameter: 53.5 - 54mm
Width: 20mm
ORDER CODE: AC837
STANDARD PLASTIC
ENCLOSURES
Note: Manufactured from hiimpact styrene and ABS.
Enclosures are supplied complete with lids and screws.
Dimensions indicated for each
enclosure are the length, width
Note: These distance bolts or
stand-offs are used for mounting and height outer dimensions.
a PCB onto a panel or inside an
enclosure. Both ends have the
same, M3 (3mm) or M4 (4mm),
screw thread.
Female-to-female type has a
06.3
NON RIBBED
AA034
AA035
AA036
AA037
74x54x37mm
94x65x42mm
114x74x52mm
134x85x52mm
SPECIAL
PLASTIC ENCLOSURES
Note: Auxiliary enclosures for
specific use in the Electronics
industry.
Note: The lid is lipped to ensure
good fit. The insides of the boxes
are smooth.
GB583
MB025
MB027
AC597
AA040
AC490
AA041
PB200
PB199
RB014
RB013
SB039
SB038
EB548
AA042
SB042
SB037
black 85x35x18mm
black 70x50x25mm
white 70x50x25mm
grey 85x56x30mm
black 111x61x26mm
matt black 112x62x26mm
black 111x61x40mm
black 130x70x44mm
white 130x70x44mm
black 105x105x50mm
white 105x105x50mm
black 150x90x55mm
white 150x90x55mm
grey 174x107x30mm
black 174x107x30mm
black 195x110x60mm
white 195x110x60mm
GB531 Enclosure Black,
85x55x30mm
Note: Key ring remote control
plastic enclosure
MB034 black 60x35x18mm
MB033 white 60x35x18mm
AA998 Ventilated Enclosure Black
105x75x63mm
RIBBED
AA044 Key pad enclosure black
(for key pads MB077 / GB178)
outer dimensions 76x57x18mm,
46x57mm opening, 15mm deep
GB532 Enclosure cream coloured,
99x59x26mm
Note: The lid is lipped to ensure
a good fit. The insides of all the
boxes have slotted walls (ribs) to
accept PCBs, etc.
MB028
MB029
PB125
PB124
SB026
SB025
SB028
SB027
SB030
SB029
black
white
black
white
black
white
black
white
black
white
85x56x30mm
85x56x30mm
130x70x44mm
130x70x44mm
105x105x50mm
105x105x50mm
150x90x55mm
150x90x55mm
195x110x60mm
195x110x60mm
FLANGED PLASTIC
ENCLOSURES
Note: Enclosures have ’ears’ to
facilitate easy wall mounting.
Colour is black
This black enclosure with clip-in battery lid
for battery compartment: 18 x 27 x 52mm
(can take one 9V PP3 block battery)
Other compartment: 75x77mm, 32mm deep
Outer dimensions: 82x112mm, 39mm height
ORDER CODE: GB910
Note: Enclosures have detachable ’ears’ to facilitate easy wall
mounting. Colour is black
GB530 104x74x46mm
AA038 104x74x63mm
PLASTIC UTILITY /
STORAGE ENCLOSURES
AA351 Modular Drawer Box with
16 drawers, interlocking 4 sides
dimensions: 238x183x138mm
drawer inside: 120x50x33mm
06.4
This black enclosure with clip-in battery lid
for battery compartment: 30 x 30 x 63mm
(can take two 9V PP3 block batteries)
ORDER CODE: AB077
This cream coloured remote control enclo-
sure with space for keyboard (no holes or
opening yet made). Clip-in battery lid.
Battery compartment: 17 x 28 x 52mm
(can take one 9V PP3 block or two 1.5V AA
batteries)
2 Spring and 2 end plates to make contact
with AA cells, 1 matching colour plastic faceplate and 1 red IR filter plate of the same
size are supplied.
ORDER CODE: GB901
230x110x80mm
SIMPLEX WITH VISOR
METAL ENCLOSURES
AA997 Enclosure plastic white
120x114x42mm
AB380 Enclosure for 3-pin plug top
transformer, black, dimensions:
outer: 75x112mm,67mm height
inner: 62x78mm, 50mm height
AC491 Enclosure for transformer, white
Dimensions:
AC492 Enclosure for transformer, black
Dimensions:
AA594 Stock box 5 simplex
101x131x202mm
GB582 Enclosure plastic white
65 x 46 x 32mm with
grooved lid base for rubber seal
XB026 Sealed, white 210x132x150mm
rubber seal and inner metal plate
SIMPLEX
METAL ENCLOSURES
Note: This range of boxes are
chemically de-rusted, de-greased
and zinc-phosphated prior to
being powder coated. Fixing
screws as well as rubber feet are
supplied. Boxes are constructed
from 0.8mm and 1.0mm (22swg)
mild steel.
Note: A simply constructed box
with a visor effect in front for the
protection of instruments and
pleasing visual effect.
60x80x100mm
80x100x120mm
100x120x140mm
120x140x180mm
visor
visor
visor
visor
ALL PURPOSE
WITH VISOR
METAL ENCLOSURES
Note: This box has a visor effect
and is very economical to assemble due to the base interlocking
with the cover and having only
two fixing screws.
AA602 Stock box 1 all purpose
70x175x125mm
70x218x152mm
80x310x230mm
100x380x300mm
VENTILATED
METAL ENCLOSURES
Note: A simply constructed box
with only 2 fixing holes. PCB can Note: The framed front gives
your instruments protection as
be mounted on flanges in base.
well as a pleasing visual effect.
Ventilation is supplied in the
51x76x102mm
form of slots on the sides and
top.
51x91x152mm
AA043 Power supply unit white
76x101x132mm
76x116x182mm
06.5
AA599 Stock box 1 purpose visor
60x150x165mm
70x200x165mm
80x270x165mm
SPECIAL
METAL ENCLOSURES
Note: Auxiliary enclosures each
with a specific use.
FB828 Wall mount box 1, hinged,
lockable door, 200x295x75mm
FB829 Wall mount box 2, hinged,
lockable door, 285x285x88mm
06.6
COMPONENTS
BATTERIES AND
ACCESSORIES
LEAD ACID
RECHARGEABLE
BATTERIES
Note: Lead acid rechargeable
batteries that are sealed. Ideally
suited for standby power for
alarm systems.The non-spillable
feature of these batteries means
that they can be operated in any
position. Some care has to be
taken while charging as these
batteries are sealed and can
explode if recharged incorrectly.
It is recommended that a stabilized, constant voltage source
should be used, with current limiting that is proportional to the
battery’s Ah (Amp x hour) rating.
Car battery type chargers must
never be used. The 6V batteries
are designed to be recharged at
a constant voltage of 6.9Vdc and
12V batteries are recharged at
13.8Vdc.
FB868 12V 3Ah, height 60mm
length 134mm width 66mm
AC586 Pack that contains 10 size AA 1.5V
(1200mAh) cells
FB869 12V 5Ah, height 101mm
AC587 Pack that contains 2 size C 1.5V
(3200mAh) cells
RB008 12V 7Ah, height 94mm
FB870 6V 4.5Ah, height 101mm
GB558 12V 17Ah, height 167mm
AC588 Pack that contains 2 size D 1.5V
(8000mAh) cells
GENERAL PURPOSE
BATTERIES
PB242 12V 1.2Ah, height 50mm
Note: These are low cost zinccarbon batteries. Not rechargeable.
JB056
EB266 12V 2Ah height 60mm
07.1
Battery size ’PP3’ 9V (400mAh)
GB718 1.5V Button Cell AG13 / LR44
11.6x5.5mm (125mAh)
AC590 Pack that contains 2 alkaline
size C 1.5V (7800mAh) cells
Blister pack that contains one size ‘PP3’ 9V
block battery: 1 x (JB056).
ORDER CODE: AB736
AC592 Pack that contains 10 Button Cells
1.5V Cells of type AG13 / LR44
11.6x5.5mm (125mAh)
ALKALINE BATTERIES
Note: These are long-lasting
alkaline batteries. Not rechargeable.
size D 1.5V (16500mAh) cells
size AAA 1.5V (1100mAh) cells
GC317 4.5V Battery Alkaline flat,
height 65.1mm, width 62,
thickness 21.6mm (4400mAh)
size N 1.5V (800mAh) cells
cell dimensions: 29x11.5mm
GB729 6V Battery 4LR44 25x13mm
(165mAh)
EB160 9V Battery Alkaline size PP3
26.2x17.5x48.5mm (500mAh)
DB247 12V Battery alkaline (A23)
for Remote Control Transmitters
28.5x10.2mm (33mAh)
AB748 Pack that contains 4 alkaline
size AA 1.5V (2600mAh) cells
AA976 Pack that contains 24 alkaline
AC886 6V Battery made of 4 button cells
for Remote Control Transmitters
21x8mm (72mAh)
AD184 Pack that contains 10 Button Cells
1.5V Cells of type AG3 / LR41
7.9x3.6mm (28mAh)
07.2
AC818 3V Disc Battery CR2430
24.5x3.0mm (280mAh)
AC595 Blister Pack that contains 2 Ni-MH
AB741 Pack that contains 1 alkaline
(A23) 12V (38mAh) battery
battery dimensions: 28.5x10.3mm
ORDER CODE: AB741
LITHIUM
BATTERIES
AB520 3V Lithium Battery CR14250
with axial connecting leads
10.5g, 25.5x15mm (950mAh)
NICKEL CADMIUM
RECHARGEABLE
BATTERIES
EB282 3V Disc Battery CR1220
12.5x2.0mm (35mAh)
AC596 Blister Pack that contains 4 Ni-MH
EB340 3.6V Battery pack 400mAh
height 31mm, length 43mm,
width 14.5mm, weight 35g
used in cordless telephones
GB518 size C 1.2V 4000mAh
GB517 size D 1.2V 7000mAh
GB567 '9V' (actually 8.4V) 200mAh
AD251 Pack that contains 5 lithium
3V Disc Batteries CR2016
20x1.6mm (85mAh)
AB018 3V Disc Battery CR2032
20x3.2mm (230mAh)
AD230 Blister Pack that contains 2 Ni-Cd
size AAA 1.2V (300mAh) cells
EB267 7.2V Battery pack 2000mAh
width 25mm, weight 295g
AC594 Pack that contains 5 lithium
3V Disc Batteries CR2032
20x3.2mm (230mAh)
NI-MH RECHARGEABLE
BATTERIES
AA544 size AAA 1.2V 700mAh
AA545 size AA 1.2V 1500mAh
07.3
AC898 PCB Mount 4.8V Battery pack
143mAh, charge for 16hrs at 13mA
height 16mm, length 17.6mm,
width 23mm, weight 24g
AB285 7.2V Battery pack 180mAh
width 21.5mm, weight 30g
used in RC Helicopter (GB824)
BATTERY HOLDERS
AC808 PCB Mount Disc Battery Holder
outer Ø24.2mm/ inner Ø20.4mm
ideal for 3V CR2032 (AB018)
GB492 6 x AA cells 57x45x27mm
Blister pack that contains 2 Battery Holders
that each take 2xAA size cells: 2 x (MB058).
ORDER CODE: AB735
MB060 8 x AA cells 57x62x29mm
AB499 PCB Mount Disc Battery Holder
outer Ø28mm/ inner Ø25.5mm
ideal for 3V CR2430 (AC818)
AC998 3 x AA cells 48x57x15mm
(with solder tags, flat mount)
EB892 1 x C cell 60x29x25mm
(with solder tags)
GB681 1 x N cell 35x13x13mm
(with solder tags)
GB426 3 x AA cells 48x57x15mm
(flat mount)
MB061 2 x C cells 61x56x24mm
GB731 2 x N cells 39x28x14mm
(with leads)
QB054 4 x C cells 110x54x16mm
GB721 1 x AAA cell 51x13x13mm
(with solder tags)
(flat mount)
EB891 1 x D cell 70x35x26mm
(with solder tags)
GB722 4 x AAA cells 52x22x19mm
(with solder tags)
EB893 1 x AA cell 55x15x13mm
(with solder tags)
MB062 2 x D cells 71x71x32mm
AB500 4 x AA cells, lid, switch and leads
(flat mount)
QB053 4 x D cells 130x71x32mm
07.4
BATTERY CHARGERS
AND ACCESSORIES
GB491 1 x 9V battery (with leads)
AB501 1x 9V battery, lid, switch and leads
JB038
Battery Clip for 9V PP3 Battery
Blister pack that contains 5 battery clips that
fit onto a 9V PP3 battery: 5 x (JB038).
ORDER CODE: AB732
BATTERY TERMINAL CLIP
UNIVERSAL NI-CD / NI-MH
BATTERY CHARGER
6.9VDC/1A 3 PIN 230VAC PLUG-IN
POWER SUPPLY / CHARGER
Features:
This battery charger is designed to only
recharge NiCd and NiMH: 1.2V AAA, AA, C
This 6.9VDC regulated power supply plugs
and D size cells and 9V ‘PP3’ block size batinto a 230VAC mains wall socket. It can
teries.
serve as a 6V lead acid battery charger /
trickle charger. It has a 1A current limiter that Charges up to 4x AAA, AA, C or D cells at
250mA each and 2x 9V block batteries at
protects against destructive short circuits
and excessive current loading. It has a built- 13mA each.
Charging Time is switch selectable for 3, 6, 9
in transformer and a LED that indicates
or 24 hours as indicated on the charging
when the power supply is powered.
timetable. LEDs indicate charging in
ORDER CODE: AC894
progress. When the pre-set time is reached,
13.8VDC/1A 3 PIN 230VAC PLUG-IN the charger will automatically switch to trickle
POWER SUPPLY / CHARGER
charge mode.
Cell Tester is used to determine the
rechargeability and charge condition of AAA,
AA, C or D cells.
Discharge function is only used on NiCd
AAA, AA, C and D cells.
ORDER CODE: EB162
This 13.8VDC regulated power supply plugs
into a 230VAC mains wall socket. It can
serve as a 12V lead acid battery charger /
trickle charger. It has a 1A current limiter that
protects against destructive short circuits
and excessive current loading. It has a builtin transformer and a LED that indicates
when the power supply is powered.
ORDER CODE: FB401
LIGHT
PRODUCTS
XENON STROBE LAMPS
12V CAR BATTERY PROTECTOR
AB418 20W Linear Xenon Strobe Lamp,
70mm length, 3.6mm diameter
This device is clipped on to 2 battery blade
terminals. It enables one to easily and neatly
connect up to 4 wires to each battery terminal. It has two 7mm wide spade sockets with
midpoints spaced 46mm apart. Each spade
socket is connected to one 5mm wide blade The battery protector prevents appliances
terminal and 3 pcb mounted screw terminals. (e.g. cool box) from draining the battery of
ORDER CODE: FB405
your car. The device continuously monitors
your car battery’s voltage and charge status.
Specifications:
Input Voltage: 12Vdc from the car’s battery
Maximum Operating Current: 10A
Required Input (battery) Voltage for the output load to be connected:
12.5V ± 0.3V
Input (battery) Voltage for the output load to
be cutoff (disconnected):
11.2V ± 0.3V
ORDER CODE: AB407
07.5
AB375 900W Linear Xenon Strobe Lamp,
240mm length, 11mm diameter
STROBO TUBES S106A
The strobe is ideal for signal and timing
applications.
Specifications:
Min.anode voltage : 300V
Nom.anode voltage : 400V
Mmax.anode voltage : 600V
Trigger voltage : 4kV min.
Flash rate / min. : 6000 max.
Voltage across prim. : 200V
Energy : 0.6mWs
Dimensions:
a: 22mm; b: 32mm; c: 15mm; d: 6mm
ORDER CODE: FB097
STROBO TUBES S4030
The strobe is ideal for signal applications.
Specifications:
Min. anode voltage : 200V
Nom. anode voltage : 330V
Max. anode voltage : 400V
fl/min. : 4 max.
Life : 8000
Ws : 20
Anode voltage : 330
Main capacitance : 360µF
Trigger capacitor : 0.047µF
Energy : 0.9mWs
Dimensions:
a: 12mm; b: 30mm; c: 15mm; d: 4mm
ORDER CODE: FB098
STROBO TUBES S4668
The strobe is ideal for signal and warning
applications.
Specifications:
fl/min. : 100 max.
Life : 2 x 106
Ws : 45
Energy : 0.8mWs
Dimensions:
a: 32mm; b: 53mm; c: 40mm; d: 6mm
ORDER CODE: FB099
STROBO TUBES S6030
The strobe is ideal for signal applications
Specifications:
Trigger voltage : 4KV min.
fl/min. : 4 max.
Life : 8000
Ws : 25
Anode voltage : 330
Energy : 0.9mWs
Dimensions:
a: 19mm; b: 30mm; c: 15mm; d: 6mm
ORDER CODE: FB100
STROBO TUBES S6049
Life : 8000
Ws : 27
Anode voltage : 330
Energy : 0.9mWs
Dimensions:
a: 16mm; b: 49mm; c: 15mm; d: 6mm
ORDER CODE: FB101
STROBO TUBES STC150
STROBO TUBES S8538
The strobe is ideal for photographic applications.
Specifications:
Nnom. anode voltage : 400V
fl/min : 6 max.
Ws : 100
Energy : 0.8mWs
Dimensions:
a: 25mm; b: 45mm; c: 15mm; d: 6mm
ORDER CODE: FB102
Specifications:
Trigger voltage : 6KV min.
fl/min : 60 max.
Life : 4 x 106
Ws : 120
Anode voltage : 450
ORDER CODE: FB103
STROBE LAMP 50W
XENON U-STROBO TUBE
The strobe is ideal for signal and warning
applications.
Specifications:
Min. trigger voltage : 6kV
Max. flash rate : 100 flashes / min.
Max. energy / flash : 45Ws
Width of device : 20mm
Length excluding pins : 45mm
Length of pins : 40mm
Diameter of tube : 6mm
ORDER CODE: JB051
XENON U-STROBO TUBE U106
The strobe is ideal for signal and timing
applications.
Specifications:
Min. trigger voltage : 4kV
Max. flash rate : 6000 flashes / min.
Max. energy / flash : 4Ws
Width of device : 22mm
Length excluding pins : 36mm
Length of pins : 15mm
Diameter of tube : 6mm
ORDER CODE: GB326
Specifications:
fl/min. : 4 max.
07.6
Power Rating: 50 Watt
ORDER CODE: GB726
FLUORESCENT LAMPS
EB168 white fluorescent tube 2Ft (60cm)
COLD-CATHODE
FLUORESCENT LAMPS
Note: These are cold-cathode fluorescent lamps that are ideal for
decorative lighting. Lamps are
available in 100mm and 300mm
lengths and different colours.
The lamps and their power supplies are sold separately.
Specifications:
Tube Voltage: 180 - 800V
Average Brightness: 15 000cd/m²
Average Life: 15 000 hours
Lamp Diameter: 4mm
100MM LENGTH
COLD-CATHODE LAMPS
AB384 Blue Cold-Cathode Lamp 100mm
AC598 Green Cold-Cathode Lamp 100mm
300MM LENGTH
COLD-CATHODE LAMPS
AC359
AC360
AC361
AD243
Internal Gas: Mercury vapour
Dimensions: 170 x 75(Ø)mm
It emits ultraviolet radiation for exposing presensitized PCBs like (AC983)
Please Note: To extend the life of the lamp
one should cool it with a fan when in use.
ORDER CODE: GB494
Blue Cold-Cathode Lamp 300mm
Green Cold-Cathode Lamp 300mm
Pink Cold-Cathode Lamp 300mm
White Cold-Cathode Lamp 300mm
ORDER CODE: GB764
SPOTLIGHTS AND
COLOURED LAMPS
NEON LAMPS /
INDICATORS
POWER SUPPLIES
FOR COLD-CATHODE
FLUORESCENT LAMPS 12VDC
AB070 Halogen Lamp 150W / 230Vac
57.5 x 18.5mm diameter
AA961 Neon Lamp 220Vac (16x52mm),
14mm screw-thread
Note: These power supplies are
specially made for use with the
cold-cathode, fluorescent lamps.
In order to prevent power supply
damage, only use cold-cathode
lamps of the correct size.
Specifications:
Maximum Supply Voltage: 12Vdc
Supply Current: ±375mA
Output Voltage: 180 - 800V
Dimensions:
61 x 21mm, 15mm height
AB385 Power Supply for Cold-Cathode
lamps that have 100mm length
AC389 Power Supply for Cold-Cathode
lamps that have 300mm length
ULTRAVIOLET
BLACKLIGHTS
JB137
Neon Lamp, wire-ended, 16mmx
6mm dia., operates on 240Vac
using a 330k Ohm series resistor
AA978
AA979
AA977
AA980
Note: Panel Mount Indicator with
a built-in lamp. The front is
square 11.5x11.5mm, 38mm long.
Use 10.2mm diameter panel hole
GREEN
AD084 12V Panel Lamp
GB691 220V Panel Lamp
FILAMENT LAMPS
Note: Mini Torch Lamps that are
wire-ended
GB663 1.2V / 300mA, 8mmx3.5mm dia.
AC863 Blister pack that contains 4 lamps:
1.2V / 300mA, 8mmx3.5mm dia.
GB697 2.4V / 300mA, 12mmx5mm dia.
GB668 6V / 80mA, 10mmx3.15mm dia.
GB669 12V / 60mA, 10mmx3.15mm dia.
UV BLACKLIGHT TUBE
IN HOUSING 12VDC
BLACKLIGHT BULB 160W/230V
Bulb Blue 60W / 240Vac
Bulb Green 60W / 240Vac
Bulb Red 60W / 240Vac
Bulb Yellow 60W / 240Vac
AMBER
RED
Specifications:
Supply Voltage: 8x1.5V AA cells or 12Vdc
Lampholder: 12 inch (30cm) 8W, UV Tube
Power Cord: 3m long with a cigarettelighter
plug connected at its end
Dimensions: 318mm long
ORDER CODE: GB709
Disco
Disco
Disco
Disco
GB710 UV Light Tube 1Ft (30cm) 8W
EB169 UV Light Tube 2Ft (60cm) 20W
EB170 UV Light Tube 4Ft (120cm) 40W
EB215 PAR 38 Spotlight 150W / 230Vac
Note: Panel Mount Indicator with
a built-in 12V lamp. The front is
round 13mm diameter, 32mm
long. Use 10.2mm diameter panel
hole. Power lead length: 130mm
AD234
AD235
AD236
AD237
AD238
Amber 12V Panel Lamp
Blue 12V Panel Lamp
Red 12V Panel Lamp
Green 12V Panel Lamp
Clear 12V Panel Lamp
AA265 Mini Lamp 3W / 220Vac
bayonet fitting
EB175 Reverse Stop Indicator Lamp
12V / 21W
15mA INDICATOR LED 4 - 30VDC
EB176 Front Park Light Lamp 12V
Specifications:
Power Rating: 160W / 230Vac
Lampholders: (EB276) or (GB708)
This indicator LED (light emitting diode)
circuit will operate with almost constant
brightness on voltages: 4 - 30Vdc / 15mA
07.7
GROUP
Note: Mini-lamps 10x28mm bayonet fitting
EB180 Lampholder Nylon Bayonet
22mm inner dia. fits (EB177)
AA015 6V / 3W
AA016 12V / 3W
GROUP
Note: Mini-lamps 10x28mm screw
fitting
GB151
GB152
GB196
AA013
FB076
AA014
EB179 Lampholder Brass Bayonet
22mm inner dia., base 46mm dia.
Blister pack that contains 2 mini lamp holders for 10mm screw-in lamps: 2 x (AB174).
ORDER CODE: AB733
2.5V / 0.75W
3.8V / 1.2W
4.8V / 2.4W
6V / 2W
12V / 3W
24V / 2W
REFLECTORS
REFLECTOR PAR56
EB276 Lampholder Porcelain Edison
Screw in Fitting, M3 fixing holes
LAMPHOLDER WITH ARMATURE
FOR 1 SCREW IN BULB 160W/230V
Reflector for PAR56 fitting with ceramic connector and socket GY9.5.
Dimensions : 90 x 178(Ø)mm
ORDER CODE: FB106
Specifications:
Power Rating: max. 160W / 230Vac
Lampholder: Single Edison Screw in Fitting
Weight: 3.4kg
ORDER CODE: GB708
Blister pack that contains 5 mini lamps 2.5V
screw fitting: 5 x (GB151).
ORDER CODE: AB734
LAMPHOLDERS AND
REFLECTORS
AA266 Mini Lamp Holder Screw in
Fitting for 10mm lamps
REFLECTOR PAR64
Reflector for PAR64 fitting with ceramic connector and socket GY9.5.
Dimensions : 103 x 202(Ø)mm
ORDER CODE: FB107
MIRROR BALL
LAMP HOLDERS
EB177 Brass Flanges / Base Plate
10mm screw-thread
AB174 Mini Lamp Holder Screw in
Fitting for 10mm lamps,
black, round plastic base with two
3.5(Ø)mm mounting screw holes
This Mirror ball is ideal for disco,
has a 30cm diameter and weighs 2.12kg
ORDER CODE: AB155
07.8
MINI, BRIGHT,
FLASHING NECKLACE
LIGHT EFFECT /
DISPLAY DEVICES
YELLOW ROPE LIGHT
2 CHANNELS 8M
SMOKE MACHINE 500 WATT
Note: A brightly flashing LED is
used to attract attention.
Available in 4 different colours.
Power Supply:
3 x 1.5V AG3 button cells
This machine is ideal for creating thick
smoke on stages, in theatres, etc.
It uses the special smoke liquid, (AB764), to
make smoke. It has a remote control with
on/off switch. This machine has to be
cleaned with the cleaning liquid (AD053).
Specifications:
Tank Capacity: 0.95 litre
Warm-up Time: 5 - 8 minutes
Output Smoke Volume Rate: 55m³ / min.
Weight: 2kg
ORDER CODE: AD052
STANDARD SMOKE LIQUID 5L
This is standard smoke liquid that should be
used with proper smoke or fog machines.
Contains five litres of smoke liquid.
ORDER CODE: AB764
GB815
GB816
GB817
GB818
Blue
Green
Red
Yellow
ROPE LIGHTS
1 CHANNEL 9M
These are single-channel, waterproof, flexible rope lights. Used for decorative lighting.
Bendable to any shape. For outdoor / indoor
use.
Specifications:
Power Supply: 230Vac / 50 Hz
Power Rating: 150 Watt (16.5W per meter)
Total Lenght: 9m
Diameter: 13mm
Bulb Specifications:
Power: 6.5V / 70mA / 0.45W each
Operating Time: 20 000 hours
Bulb Spacing: 2.8cm interval, 36 bulbs / m
GC230
GC231
GC232
GC233
AC809
Blue
Clear
Yellow
Red
Green
YELLOW ROPE LIGHT
2 CHANNELS 8M
SMOKE MACHINE CLEANING LIQUID
250mL
This is a 2-channel, waterproof, flexible rope
light. Used for decorative lighting. Bendable
to any shape. For outdoor / indoor use. A
control box with 8 programs is supplied.
Specifications:
This is the cleaning liquid for the smoke
Colour: Yellow
machine (AD052). It must be used periodiTotal Lenght: 8m
cally to clean the interior of the smoke
machine. It works perfectly with the low price Diameter: 13mm
machines as well as with the professional
machines for shows. It is not dangerous and Power: 6.5V / 70mA / 0.45W each
conforms to strict international standards.
Contains 0.25 litres of cleaning liquid.
ORDER CODE: GC238
ORDER CODE: AD053
This is a 2-channel rope light with red, blue,
green and yellow lights that flash according
to 1 of 8 flashing programmes. Flashing is
controlled by a built-in control box. Used for
decorative lighting. Flexible tubing. It may
only be used indoors.
Specifications:
Colour: clear plastic with lights that shine
red, blue, green and yellow
Total Lenght: 8m
Diameter: 13mm
Power: 6.5V / 70mA / 0.45W each
ORDER CODE: AC810
CHRISTMAS LIGHTS
This is a christmas tree decorative light
string. It has low-voltage, micro lamps. It
makes use of a low-voltage transformer. For
outdoor / indoor use. A control box with 8
programs is supplied.
Specifications:
Power Supply: 24Vdc from 230Vac adapter
(is included)
Lamps: 160 lamps in total
Light String Length: 8m
Power Cord Lenghth: 9m
Control Box Programs:
combination, wave, sequence, slow glow,
chase, slow fade, twinkle and steady on
GC248 4 Different Colours, 8m
GC249 White, 8m
DISCO LIGHT KIT 230VAC
This disco light set consists of:
07.9
Pin Spotlight with 30W / 6.4V lamp and builtin lamp power supply 230Vac
5 colour wheel with a motor 2rpm 230Vac
Mirror ball with 20cm diameter, 0.9kg
Motor rotates the mirror ball 3rpm, 230Vac
ORDER CODE: AB004
DOUBLE ROCK BALL LIGHTS
300W / 230VAC
AA376 Black cable sold per meter
SB010 Black cable sold in a roll of 100m
AA368 Blue cable sold per meter
SB015 Blue cable sold in a roll of 100m
AA369 Brown cable sold per meter
SB018 Brown cable sold in a roll of 100m
AA370 Green cable sold per meter
SB011 Green cable sold in a roll of 100m
AA371 Grey cable sold per meter
SB013 Grey cable sold in a roll of 100m
AA372 Orange cable sold per meter
SB019 Orange cable sold in a roll of 100m
AA377 Red cable sold per meter
SB014 Red cable sold in a roll of 100m
This double rock ball is used to create
colourful rotating light effects. Two 34 lens,
composite light globes rotate at each end of
a rotating base.
Constant speed rotation
Light spots in 6 colours
Power supply: 230Vac
Weight: 4.7kg
Required (not included): 2 Halogen lamps
150W / 230Vac - 2 x (AB070)
ORDER CODE: AB005
AA373 Violet cable sold per meter
SB016 Violet cable sold in a roll of 100m
AA374 White cable sold per meter
SB012 White cable sold in a roll of 100m
AB566 Brown cable sold in a roll of 100m
AB512 White cable sold per meter
AB567 White cable sold in a roll of 100m
0.4 SQ MM 2.5A 40V
SB035 White cable sold in a roll of 100m
0.5 SQ MM 3A 300V
AA774 Black cable sold in a roll of 100m
TB022 White cable sold in a roll of 100m
1.0 SQ MM 10A 300V
AB689 White cable sold per meter
LOUDSPEAKER CABLE
STANDARD
LOUDSPEAKER CABLE
AA375 Yellow cable sold per meter
SB017 Yellow cable sold in a roll of 100m
0.5 SQ MM
AB616 Red/Black cable sold per meter
AB617 Red/Black cable sold in roll of 100m
1.5 SQ MM
FB125 Red/Black cable sold per meter
SUPERLASER PATTERN-MAKER
2.5 SQ MM
4.0 SQ MM
O.F.C. LOUDSPEAKER CABLE
This device contains a red laser of 4.9mW,
that projects 16 pre-programmed geometric
patterns. Compact, affordable laser that is
perfect for the creation of laser light effects.
It has 3 operating modes: cycles through
patterns automatically, music-controlled or
manual operation
Specifications:
Power supply: 9Vdc / 0.3A (adapter is incl.)
Weight: 0.36kg
ORDER CODE: AB148
CABLES AND
ACCESSORIES
PANEL FLEX
AA490 0.2mm² Multi Stranded Wire
2m of each of the 10 colour wires
0.50 SQ MM 3A 300V
AA699 Black cable sold in a roll of 100m
AD231 Blue cable sold per meter
AD232 Blue cable sold in a roll of 100m
AA701 Red cable sold per meter
AA700 Red cable sold in a roll of 100m
AB614 Violet cable sold per meter
AB615 Violet cable sold in a roll of 100m
RIPCORD / TWIN FLEX
0.20 SQ MM 1.4A 100V
0.2 SQ MM 1.4A 40V
AB511 Brown cable sold per meter
07.10
1.5 SQ MM
Colour: transparent PVC
Size: 2 x 1.50mm²
Inner conductor: 0.1mm x 189
Outside Ø: 2.85mm x 2
ORDER CODE: FB130
100M ROLE ORDER CODE: AB571
2.5 SQ MM
Size: 2 x 2.5mm²
ORDER CODE: FB131
4.0 SQ MM
Size: 2 x 4.0mm²
ORDER CODE: FB132
POWER CABLE
TB004 4 core white sold in a roll of 100m
POWER CABLE CABTYRE
AA507 6 core white cable sold per meter
XB004 6 core white sold in a roll of 100m
0.5 SQ MM 3A 300V
TB021 White cable sold in a roll of 100m
FB492 Black cable sold per meter
AB574 Black cable sold in a roll of 100m
0.75 SQ MM 6A 300V
sold per meter
AB582 4 Core White Foil Screened Cable
sold in a roll of 100m
AA771 4 Core White Cable sold per meter
AB583 4 Core White sold in a roll of 100m
AA772 6 Core White Cable sold per meter
AB693 12 Core White Cable sold per meter
CATEGORY 5E
LAN DATA CABLE
AA178 30 core white sold in a roll of 100m
1.0 SQ MM 10A 300V
AA606 4 twisted pair, multi stranded,
LAN cat5E cable
sold per meter
AB585 4 twisted pair, multi stranded,
LAN cat5E cable
POWER CABLE HOUSE WIRE
Note: PVC insulated, 7-strand
copper wire. The earth wire is not
insulated. Suitable for house
wiring and heavy currents.
EB166 Black 2.5mm² 25A 600V cable
sold per meter
AB577 Black 2.5mm² 25A 600V cable
EB165 Red
sold
AB578 Red
sold
AC854 0.2mm² Solid Core Wire,
PVC insulated, tinned copper core,
10m black and 10m red,
5m of each of the following colours:
blue, brown, green, grey, orange,
violet, white and yellow
FLEXIBLE, FLAT, 4 CORE
COMMUNICATION CABLE
2.5mm² 25A 600V cable
per meter
2.5mm² 25A 600V cable
in a roll of 100m
AA971 Uncoated Copper Wire 1.5mm²
(7 strands) cable sold per meter
AB579 5kg Uncoated Copper Earth Wire
1.5mm² (7 strands)
SIGNAL / BURGLAR
ALARM CABLE
AA500 4 twisted pair, solid core,
LAN cat5E cable
sold per meter
AB586 4 twisted pair, solid core,
LAN cat5E cable
GB733 4 twisted pair, solid core,
braid-foil screened, LAN cat5E
cable sold per meter
AB587 4 twisted pair, solid core,
braid-foil screened, LAN cat5E
cable sold in a roll of 100m
RIBBON CABLE
Note: Suitable for internal wiring
of computers, office equipment
Note: This is 4 core, multi strandand a variety of modern electroned, flat, white, PVC, telephone
ic equipment. The pitch between
cable.
conductors is 1.27mm.
GB727 4 core cable sold per meter
AB580 4 core cable sold in a roll of 100m
GREY COLOUR
FLEXIBLE, FLAT, 8 CORE
COMMUNICATION CABLE
SOLID CORE
COMMUNICATION CABLE
GROUP
NB001 10 way cable sold per meter
AB588 10 way cable sold in a roll of 30m
Note: This is 8 core, multi stranded, flat, white, PVC, telephone
cable.
Note: These cables are ideal for
alarm systems and light current
applications. The outer sheath is
white PVC, with coloured PVC
insulated 0.5mm tinned solid
copper cores.
AB422 8 core cable sold per meter
AB581 8 core cable sold in a roll of 100m
MULTI STRANDED, ROUND
COMMUNICATION CABLE
AB590 20way cable sold in a roll of 30m
AA506 4 core brown cable sold per meter
SB036 4 core brown sold in a roll of 100m
EB301 4 Core White Foil Screened Cable
07.11
COAXIAL CABLE
MULTI COLOUR
AA393 Black RG58 Co-ax Cable, 50 Ohm
5mm outer diameter
sold per meter
RB019 Black RG58 Co-ax Cable, 50 Ohm
5mm outer diameter
GROUP
GB179 10 way cable sold per meter
GB205 16 way cable sold per meter
AB629 34 way cable sold per meter
SCREENED AUDIO
COAXIAL CABLE
AA962 Black RG59 Co-ax Cable, 75 Ohm
6mm outer diameter
sold per meter
AB600 Black RG59 Co-ax Cable, 75 Ohm
6mm outer diameter
EB156 White TV Co-ax Cable, 75 Ohm
6.5mm outer diameter
sold per meter
AB601 White TV Co-ax Cable, 75 Ohm
6.5mm outer diameter
FIBRE OPTIC CABLE
Note: Enamel insulated copper
wire that is supplied in packets.
AC864
AC584
AC865
AC866
AC867
AC868
AC869
AC870
AC871
AC872
AC873
Wire
Wire
Wire
Wire
Wire
Wire
Wire
Wire
Wire
Wire
Wire
Dia.
Dia.
Dia.
Dia.
Dia.
Dia.
Dia.
Dia.
Dia.
Dia.
Dia.
0.1mm,
0.2mm,
0.3mm,
0.4mm,
0.5mm,
0.6mm,
0.7mm,
0.8mm,
1.0mm,
1.2mm,
1.5mm,
Length:
Length:
Length:
Length:
Length:
Length:
Length:
Length:
Length:
Length:
Length:
140m
115m
55m
23m
23m
16m
12m
10m
6m
6m
4m
TINNED COPPER WIRE
EB879 Black Mono Microphone Cable,
Multi Stranded, 5.8mm outer dia.
sold per meter
AB596 Black Mono Microphone Cable,
GB249 Fibre Optic Cable, 1mm diameter
plastic core, sold per meter
AA394 Grey Mono Audio Signal Cable,
sold per meter
AB597 Grey Mono Audio Signal Cable,
AA437 Black Stereo Microphone Cable,
sold per meter
AB598 Black Stereo Microphone Cable,
EB878 Black Stereo, Twin Screened Cable,
Multi Stranded 2 x 2.6mm outer dia.
sold per meter
AB599 Black Stereo, Twin Screened Cable,
Multi Stranded 2 x 2.6mm outer dia.
ENAMEL INSULATED
COPPER WIRE
Note: Tinned solid copper wire
that is supplied in packets. This
wire does not have any electrical
insulation on the surface. It is
ideal for making PCB jumpers
(wire links) and for repairing
cracked PCB tracks.
AC874
AC875
AC876
AC877
AC878
AC879
Wire
Wire
Wire
Wire
Wire
Wire
Dia.
Dia.
Dia.
Dia.
Dia.
Dia.
0.6mm,
0.8mm,
1.0mm,
1.2mm,
1.5mm,
2.0mm,
Length:
Length:
Length:
Length:
Length:
Length:
10m
7m
5m
3m
2m
0.8m
RESISTANCE WIRE
Note: Enamel insulated copper
wire for transformers, electromagnets and electric motors.
Caution: Do not inhale toxic
fumes while removing enamel
from the wire with a soldering
iron. Always solder in a well ven- Note: It is ideal for making wiretilated area. Supplied in rolls of
wound resistors that have stable
250g
resistance over a wide temperature range. It is made of
FB726 0.15mm SWG38, 1470m, 26mA
Constantan: a 55% copper and
AA032 0.56mm SWG25, 137m, 304mA
45% nickel alloy. Supplied in 5
MB126 0.8mm SWG21, 53m, 779mA
meter lengths.
AA608 30 Ohm per meter, 0.18mm dia.
AC001 60 Ohm per meter, 0.13mm dia.
07.12
CABLE TIES
HEAT SHRINK TUBING
INSULATING PLASTIC TUBES
AB994 a packet containing 10 pieces of
Mounting Blocks for cable ties
cable tie widths: 2.0 to 4.8mm
Adhesive Dimensions: 28 x 28mm
(cable ties are not included)
SPIRAL CABLE WRAPPING
AB630
A mixed pack that contains a range of insulating plastic tubes. Diameters ranging from
2 to 8mm. Please note that the pack contains heat shrink tubing but also plain insulating tubing that will not shrink when heated.
ORDER CODE: AB630
Note: The maximum shrinkage
when heated. is 50%. Supplied in
1 meter lengths. The indicated
diameter is before shrinkage.
EB886
AA001
AA002
AA003
AC915
AA004
AC914
AA005
AC913
EB887
EB888
Black 1.6mm diameter
Clear 6.4mm diameter
Black 19mm diameter
CABLE CLIPS
EB197 Flat 5mm
EB201 Round 4mm
Note: These are packets of nonrelease, nylon cable ties. A cable
tie can be used to bind cables
together or fasten it to objects.
BLACK COLOUR
AB660 a packet consisting of 100 pieces of
75 x 2.5mm cable ties
AB662 a packet consisting of 100 pieces of Note: These are spiral shaped
cable wraps that are made of
AB663 a packet consisting of 100 pieces of polythene. Spiral wrap is used to
200 x 5mm cable ties
group cables together. Spiral
wrap can be expanded up to four
AB665 a packet consisting of 100 pieces of times in diameter. Cables can be
taken through it at the ends and
between adjacent spiral turns.
AB667 a packet consisting of 100 pieces of The outer diameter / Inner diame400 x 5mm cable ties
ter is indicated for spiral wrap
AB668 a packet consisting of 50 pieces of that is not expanded.
AB669 a packet consisting of 50 pieces of AB430 outside Ø: 6mm / inside Ø: 4mm,
transparent white spiral wrap
sold per meter
AB602 outside Ø: 6mm / inside Ø: 4mm,
sold in 10m length
WHITE COLOUR
AB431 outside Ø: 10mm / inside Ø: 7.5mm,
sold per meter
AB603 outside Ø: 10mm / inside Ø: 7.5mm,
sold in 10m length
sold per meter
sold in 10m length
EMI FILTER
CABLE CLAMPS
ADHESIVE
MOUNTING BLOCKS
Note: These are mounting blocks
with a self-adhesive area that can
Note: These are ferrite cores
be stuck onto a clean, flat surdesigned to reduce induced or
face.
07.13
radiated electromagnetic interference (EMI) in mains, data and
signal cables. The ferrite halves
are mounted in a hinged nylon
housing that clamps around a
cable.
JB008
JB009
JB010
JB011
8 pin
14 pin
16 pin
18 pin
JB140 22 pin
JB013 24 pin
GB354 28 pin
0.6 INCH DUAL IN LINE
AA725 Panel Mount Mono 2.5mm
Socket
AB428 Clamp Filter for 4mm dia. cable
AB260 Clamp Filter for 7.5mm dia. cable
CONNECTORS
AND SOCKETS
Black Insulated
AUDIO 3.5MM CONNECTORS
Note: These connectors are suitable for mono and stereo applications. The wires can be soldered to the plug.
JB014
JB015
CONNECTORS 100pcs
24 pin
28 pin
JB141
JB016
32 pin
40 pin
IC SOCKETS ROUND PIN
Note: Round pin high quality IC
socket with a pin spacing of 0.1
inches (2.54mm).
DB306 Black Insulated Mono 3.5mm
Plug
DB307 Black Insulated Stereo 3.5mm
Plug
AB646
A mixed pack that contains 100 connectors.
ORDER CODE: AB646
IC SOCKETS
JB001
JB002
JB003
JB004
6 pin
8 pin
14 pin
16 pin
JB005
JB006
JB143
GB529
18
20
24
28
pin
pin
pin
pin
AD006 Black Insulated 4-Pole Stereo
3.5mm Plug
IC SOCKETS 30pcs
AB435 RF shielded 3.5mm mono jack plug
AB436 RF shielded 3.5mm stereo jack plug
JB144
JB145
24 pin
28 pin
JB146
JB147
32 pin
40 pin
SINGLE ROW
AA276 Inline Mono 3.5mm Socket Black
AB651
A mixed pack that contains 30 IC sockets.
ORDER CODE: AB651
IC ZIF SOCKETS
BB007 40 pin Aries Universal ZIF Socket
DB557
DB558
AB338
MB139
20
32
40
64
pin
pin
pin
pin
EB881 Inline Stereo 3.5mm Socket
Black
AUDIO
JACK CONNECTORS
IC SOCKETS WIRE WRAP
AA585 Wire wrap pin 15mm
STANDARD IC SOCKETS
Note: Standard IC socket for dual
in line package (DIP / DIL) with a
pin spacing of 0.1 inches
(2.54mm). Contact resistance:
0.03 Ohm. Current rating: 1A
JB007
AA735 Black Insulated Mono 2.5mm
Plug
EB326 Black Insulated Stereo 2.5mm
Plug
6 pin
EB327 In-Line Mono 2.5mm Socket
JB012
20 pin
AC707 RF shielded in-line mono 3.5mm
Socket
AC708 RF shielded in-line stereo 3.5mm
Socket
07.14
DB236 Panel Mount Mono 3.5mm
Socket
EB321 4 Panel Mounted RCA Sockets,
in-line, 75 x 25mm
DB305 Panel Mount Stereo 3.5mm Socket
Note: These connectors are suitable for mono and stereo applications. The wires can be soldered to the plug.
MB121 Black Insulated Mono 6.35mm
Plug
MB123 Black Insulated Stereo 6.35mm
Plug
FB888 RF shielded mono 6.35mm plug
FB891 RF shielded stereo 6.35mm plug
FB904 Gold-Plated, RF shielded, Stereo
6.35mm Plug, red marking
AA277 RF shielded in-line mono 6.35mm
socket
AC709 RF shielded in-line stereo 6.35mm
socket
EB882 In-Line Stereo 6.35mm Socket
Black Insulated
MB122 Panel Mount Mono 6.35mm
Open Socket
FB906 4 Panel Mounted RCA Sockets,
square, 52 x 36mm
AC805 RCA Socket PCB Mount
AC705 Gold-Plated RCA Socket
Black Marking, Panel Mount,
8mm diameter panel hole
MB124 Panel Mount Stereo 6.35mm
Open Socket
AC706 Gold-Plated RCA Socket
Red Marking, Panel Mount,
Note: Mono 6.35mm Plug
Professional die-cast
FB766 black marking
FB764 blue marking
FB756 red marking
Note: Stereo 6.35mm Plug
Professional die-cast
FB757 red marking
FB767 black marking
FB956 Panel/PCB Mount Mono 6.35mm
Socket
Note: Panel Mount RCA Socket
FB935 Panel/PCB Mount Stereo
6.35mm Socket
RCA PHONO / XLR
CONNECTORS
Note: These connectors are suitable for audio and video applications. The wires can be soldered
to the plug.
HB305
HB303
FB910
FB931
Black
Red
Yellow
White
Note: In-Line RCA Socket
EB432
AA279
AA278
EB433
Black Insulated
Blue Insulated
Green Insulated
Red Insulated
Note: Mono 6.35mm Plug, GoldPlated, Spring cable guide
FB903 blue marking
FB892 red marking
Note: Insulated RCA Plug
FB907 2 Panel Mounted RCA Sockets,
52 x 20mm
07.15
HB302
HB304
FB752
FB751
Red Insulated
Black Insulated
White Insulated
Yellow Insulated
at each end, 1.2m
EB871 Adapter Mono 6.35mm Plug to 2
RCA Sockets
FB942 90° Black Insulated RCA Plug
with screw connection
EB872 Adapter Mono 6.35mm Plug to
Mono 3.5mm Socket
Note: RF shielded RCA Sockets
AB424 Audio Lead with 4 RCA plugs
at each end, 1.2m
AC710 Adapter Stereo 3.5mm Plug to
Stereo 6.35mm Socket
AC701 Black marking
AC702 Red marking
AC703 Yellow marking
Stereo 6.35mm Socket
AB389 3 Pin XLR Plug with
solder connections
Note: RF shielded RCA Plugs
FB895 Adapter Mono 6.35mm Socket to
Mono 3.5mm Plug
FB955 Black marking
FB833 Red marking
AC704 Yellow marking
AB388 In-line 3 pin XLR Socket with
solder connections
EB884 Gold-Plated Audio Lead 5m 2 RCA
Plugs to Stereo 3.5mm Plug
AB076 Panel Mount XLR Socket
round panel hole: 23.5mm dia.
Dimensions: front 26 x 32mm,
38mm deep,4 solder connections
ADAPTERS AUDIO JACK /
XLR / RCA PHONO
Note: Audio Lead with 2 RCA
Plugs at each end.
AA063 1.2m
EB550 2.5m
EB551 5m
EB867 Adapter Mono 3.5mm Plug to 2
Mono 3.5mm Sockets
RCA Socket
GB832 Adapter Mono 6.35mm Socket
to 3 pin XLR Socket
GB833 Adapter Stereo 6.35mm Socket
to 3 pin XLR Socket
EB426 Adapter RCA Plug to 2 RCA
Sockets
FB838 Adapter RCA Plug to F Socket
EB865 Adapter RCA Socket to 2 RCA
Sockets
EB325 Adapter Stereo 3.5mm Plug to
2 Stereo 3.5mm Sockets
AC358 Adapter Mono 6.35mm Plug to
RCA Socket
EB870 Adapter Stereo 3.5mm Plug to 2
RCA Sockets
FB953 Adapter Mono 3.5mm Socket to
Mono 2.5mm Plug
AB423 Audio Lead with 3 RCA plugs
07.16
2 Stereo 3.5mm Sockets
AA520 RJ45 crimp on plug 8 pin 8 way
11.68mm wide
EB874 Adapter Stereo 6.35mm Plug to 2
RCA Sockets
Note: Venus Lead RJ11 Plug to
RJ11 Plug
Stereo 3.5mm Socket
FB936 Gold-plated Adapter
Stereo 6.35mm Plug to
Stereo 3.5mm Socket
AD106 RF shielded Connector
RCA Plug to RCA Plug
EB429 Connector RCA Socket to RCA
Socket
RJ10, RJ11, RJ12, RJ45
CONNECTORS
EB316 Protea Telephone Plug
EB317 Protea Telephone Socket
Note: These soft, plastic boots
(covering caps) are used to
colour code the ends of RJ45
network cables. Each boot must
be mounted onto the cable end
of a RJ45 plug just before crimping it onto the cable.
AD254
AD255
AD256
AD257
AD258
AD259
AD260
AD261
Black
Grey
Red
Yellow
Green
Blue
Beige
White
GB392
GB393
GB394
EB167
GB395
GB396
GB397
2m
5m
7.5m
10m
15m
20m
30m
GB385 Adapter Protea Socket to RJ11
Plug
GB384 Adapter RJ11 Socket to Protea
Plug
AB460 RJ10 PCB Mount Socket (4P4C)
for telephone handset connections
GB278 RJ11 PCB Mount Socket (6P4C)
for telephone cable connections
for telephone cable connections
for computer network connections
GB388 Connector RJ11 Socket to RJ11
Socket
GB389 Phone Twist Hinge Connecter
RJ10 Socket to RJ10 Plug
EB319 RJ9 / RJ10 (4P4C) crimp on plug
4 pin 4 way, 7.62mm wide
AA969 RJ11 crimp on plug 4 pin 6 way
9.65mm wide
AA970 RJ11 wall mount socket
GB398 Protea Lead Protea Socket to
Protea Plug, 10m
AB382 RJ12 wall mount socket
GB383 Splitter RJ11 Plug to 3 RJ11
Sockets
GB720 RJ12 crimp on plug 6 pin 6 way
9.65mm wide
AA515 RJ45 wall mount socket
07.17
GB399 Splitter RJ11 Plug to 5 RJ11
Sockets
4mm, banana type, safety plug at each end.
Nickel-plated copper beryllium contact
spring. The cable has integrated kink protection made of highly flexible stranded lead
with double insulation. Coloured blue. Length
is 250mm. Rated current is 16A. Rated voltage is 1000V (IEC-1010).
ORDER CODE: GB717
GB382 T Adapter RJ11 Plug to 2 RJ11
Sockets
Note: 4mm panel mount banana
socket
JB043 Black
JB054 Red
GB994 Yellow
GB391 Venus Lead RJ11 Plug to 2 RJ11
Sockets, 5m
Note: 4mm Banana binding post
20A
GB386 RJ10 (4P4C) Plug at each end 3m
GB387 RJ10 (4P4C) Plug at each end 5m
AB462 RJ12 (6P6C) Plug at each end 4m
AC664
AC665
AC666
AC667
AC668
Black
Blue
Green
Red
Yellow
Note: 4mm Banana plug, screw
connection
JB042
JB053
FB323
FB324
EB322
Note: Spiral Cord with identical
RJ-type plugs at each end of the
cable.
Note: These cables have a 4mm
banana plug moulded onto each
end. Very flexible PVC coated
cable is used.
Current Rating: max. 3A / 125Vac
Cable Length: 1m
BANANA PLUG
CONNECTING CABLES 20A
EB422 Black
EB423 Red
AB383 Telephone ADSL / Phone Splitter
BANANA PLUG
CONNECTING CABLES 3A
Black
Red
Yellow
Blue
Green
Note: These cables have a 4mm
banana plug moulded onto each
end. Very flexible silicone coated
cable is used. The banana plugs
are stackable with built-in 4mm
Note: 4mm Banana plug 30A, sol- banana sockets. IEC1010 rated.
Current Rating: max. 20A/250Vac
der connection
Cable Length: 1m
AB454 Black
AB455 Red
AB456 Yellow
AC669 Black
AC670 Red
AC671 Yellow
DC / AC POWER
BANANA CONNECTORS
Note: In-line socket for 4mm
CONNECTORS
Banana plug 16A, solder connecNote: The wire is connected to
Note: The wires can be soldered
the plug by tightening a screw or tion for wire.
to the plug. The socket has a
soldering. The socket can be
AB457 Black
break contact to allow disconmounted onto a panel.
AB458 Red
nection of an internal battery
AB459 Yellow
supply. The outer / inner dimensions are indicated.
FB884 2 Panel Mounted 4mm Banana
Binding Posts
CONTACT-PROTECTED,
INJECTION-MOULDED
MEASURING LEAD
Note: Adapter 2mm plug to 4mm
banana socket
FB834 Black
This injection-moulded measuring lead has a FB950 Red
07.18
AA586
FB943
AA582
DB309
FB965
3.4mm/1.3mm,
3.4mm/1.0mm,
5.5mm/2.1mm,
5.5mm/2.5mm,
6.3mm/3.1mm,
9mm long
9mm long
9mm long
9mm long
10mm long
AC675 2.4mm/0.75mm easily replaceable
spare plug
AA581 Car cigarette lighter plug
GB831 2 Pin European AC Flat Socket
2.5A 250V Black
spare plug
AB716 4.0mm/1.7mm easily replaceable
spare plug
AB410 Panel Mount Socket for Car Plug
AB409 In-line Socket for Car Plug
spare plug
AB412 In-line DC/AC Power Socket
5.5mm/2.5mm
AC677 In-line DC/AC Power Socket
5.5mm/2.1mm
GB745 Mains Plug Adapter for American
Power Socket
GB746 Mains Plug Adapter for European
Power Socket
AB411 Spiral Cord Car Plug to Socket 1m
MAINS POWER
CONNECTORS
FB939 4mm/1.3mm Power Socket
PCB Mount, 6.5mm deep
AA584 5.5mm/2.1mm Power Socket
PCB Mount, 9mm deep
FB962 5.5mm/2.0mm Power Socket
Panel Mount
AA583 6mm/2mm Power Socket Panel
Mount, 9mm deep
DB308 6mm/2.5mm Power Socket Panel
Mount, 9mm deep
AA280 3 Pin Plug 230V 15Amp White
GB744 Mains Plug Adapter
for a European 2 pin Power Socket
GB829 2 Pin European AC Power Plug
10A 250V Black
AB258 Figure 8 panel mount AC plug
FB938 5.6mm/2mm Power Socket Panel
Mount, 9mm deep fits (AA582)
AC779 5.6mm/2.5mm Power Socket Panel
Mount, 9mm deep fits (DB309)
EB329 Con. Figure 8 panel mount plug
GB830 2 Pin European AC Flat Plug
2.5A 250V Black
AB413 Figure 8 Extension Cord, 2m
FB947 6mm/2.1mm Power Socket Panel
Mount, 9mm deep
07.19
inline
’D’ TYPE AND COMPUTER
CONNECTORS
’D’ TYPE CONNECTING CABLES
AD015 IEC Mains 3 pin Plug with a built-in
EMI filter for max. 250Vac / 10A,
Temp. Range: -25°C to +85°C,
panel hole size: 31.5 x 22.5mm
AD168 AC Cord IEC Mains 3 pin Socket
to IEC Mains 3 pin Plug, 1.8m
AB419 Serial Lead 9 pin Plug
to 9 pin Socket, 2m
AB087 IEC Mains 3 pin Plug and Switch
panel mount, can take 20 x 5mm
5A fuse (AB056) (not included)
EB003 AC Cord IEC Mains 3 pin Socket
to 3 pin Plug, 2m
EB182 Multiplug Adaptor 2x15amp
AA644 IEC Mains 3 pin Power Plug
panel mount, can take 20 x 5mm
5A fuse (AB056) (not included)
GB714 Serial Lead 25 pin Plug
to 25 pin Socket, 2m
’D’ TYPE CONNECTING CABLES
EB181 Multiplug Adaptor 2x5amp
1x15amp
AD167 IEC Mains 3 pin Plug and Socket
panel mount, current rating: 10A
EB196 Multiplug Adaptor non illuminated
4x15Amp 2x5Amp
GB378 Dual Serial Laplink Lead 25 pin
Socket to 9 way Socket, 2m
AA643 IEC Mains 3 pin Power socket
chasis mount
EB212 Switchplug Duo with cover 4x4
GB377 Parallel Laplink Lead 25 pin Plug
to Plug, 2m
AA642 IEC Mains 3 pin Power Plug
inline
EB210 Switchplug with cover 2x4
EB164 Switchplug with enclosure 2X4
GB379 VGA Monitor Lead 15 pin 3 row
High Density Socket to Plug, 2m
AB294 IEC Mains 3 pin Power Socket
07.20
’D’ TYPE CONNECTORS
PCB MOUNT
Note: 15 pin 3 row High Density
connectors for computer monitors.
AA501 Plug
AA502 Socket
GB380 Parallel Printer Lead 25 pin Plug
to Centronics Plug, 3m
JB048
JB049
GB375 Serial Adapter 9 pin Socket to 25
pin Plug
25 pin Plug
25 pin Socket
MB155
MB159
MB156
MB160
MB157
MB161
MB158
MB162
9 pin Plug right angle
9 pin Socket right angle
15 pin Socket right
AC759 37 pin Plug
AC760 37 pin Socket
AC762 15 pin, 3 row, High Density Socket,
right angle, PCB mount
IDC MOUNT
GB182 Parallel Centronics Socket
AB176 USB cable A plug to B plug, 5m
AB366 USB 2 cable A plug to A plug, 2m
WIRE SOLDER
Note: Wires are soldered to the
back of the connector pins.
These connectors are often used
in computer equipment.
MB099
MB100
MB101
AC761
9 pin Connector Cover
AA539
AA536
AA540
AA537
AA541
AA538
AC765
AC766
9 way Plug
9 way Socket
15 way Plug
15 way Socket
25 way Plug
25 way Socket
37 way Plug
37 way Socket
COMPUTER CONNECTORS 25pcs
GB204 Screws for H Cover (GB203)
JB046
JB047
9 pin Plug
9 pin Socket
AB649
JB127
15 pin Plug
JB126
15 pin Socket
A mixed pack that contains 25 computer
connectors.
ORDER CODE: AB649
GB203 H Cover, Dual 25-way
AC763 USB A socket, 90° PCB mount
07.21
IDC BOX PLUG DUAL ROW 90°
LATCHING TYPE
PCB MOUNTING
AB530
AB531
AB532
AB533
AB534
AC764 USB B socket, 90° PCB mount
IDC HEADER PLUGS
AND SOCKETS
Note: IDC connectors with 0.1
inch (2.54mm) pin spacing. The
open plug connectors can be cut
to 10, 14, 16, 20, 26, 34, 40 and 50
pins as needed. These connectors are often used in computer
equipment.Connector pins have
2.54mm pitch.
IDC SOCKET DUAL ROW
FOR RIBBON CABLE
Note: These connectors are often
used in computer equipment like
membrane keyboards. Connector
pins have 2.54mm pitch.
AD116
AD117
AD118
AD119
10
14
16
20
Pin
Pin
Pin
Pin
AD120
AD121
AD122
AD123
26
34
40
50
Pin
Pin
Pin
Pin
8 Pin
9 Pin
10 Pin
11 Pin
12 Pin
AB535
GB279
AB536
AB537
13
14
15
16
Pin
Pin
Pin
Pin
90° MEMBRANE KEYBOARD
CONNECTOR SOCKETS
SINGLE ROW PCB MOUNTING
IDC OPEN PLUG DUAL ROW
PCB MOUNTING
GB478 10 Pin
AB539 13 Pin
MB154 80 Pin
IDC ACCESSORIES
IDC OPEN PLUG DUAL ROW 90°
PCB MOUNTING
DB745 Mini Jumper 0.1 inch
AA649 80 pin
MB141
MB142
MB143
MB144
10
14
16
20
Pin
Pin
Pin
Pin
MB145
MB146
MB147
MB148
26
34
40
50
Pin
Pin
Pin
Pin
IDC BOX PLUG DUAL ROW
PCB MOUNTING
IDC OPEN PLUG SINGLE ROW
PCB MOUNTING
AA555 40 Pin
IDC OPEN PLUG SINGLE ROW 90°
PCB MOUNTING
DB560
DB561
DB562
DB563
10
14
16
20
Pin
Pin
Pin
Pin
DB564
DB565
DB566
DB567
26
34
40
50
Pin
Pin
Pin
Pin
AA661 40 pin
IDC SOCKET SINGLE ROW
PCB MOUNTING
IDC BOX PLUG DUAL ROW 90°
PCB MOUNTING
10
14
16
26
Pin
Pin
Pin
Pin
AA648 34 Pin
AA667 40 Pin
AA668 50 Pin
IDC BOX PLUG DUAL ROW
LATCHING TYPE
PCB MOUNTING
5 Pin
8 Pin
10 Pin
40 Pin
IDC SOCKET DUAL ROW
PCB MOUNTING
AC850
AC851
AC852
AC853
10
16
20
40
10
14
16
20
Pin
Pin
Pin
Pin
AD111
AD112
AD113
AD114
26
34
40
50
GB616
GB618
GB620
GB622
GB624
GB626
GB628
Pin
Pin
Pin
Pin
2
3
4
5
6
7
8
Pin
Pin
Pin
Pin
Pin
Pin
Pin
GB630
GB632
GB634
GB636
GB638
GB640
GB642
9 Pin
10 Pin
11 Pin
12 Pin
13 Pin
14 Pin
15 Pin
FRICTION LOCK SOCKET
HOUSINGS
MEMBRANE KEYBOARD
CONNECTOR SOCKETS
SINGLE ROW PCB MOUNTING
AD108
AD109
FB497
AD110
Note: MOLEX connectors with
0.1 inch (2.54mm) pin spacing.
The rigid PCB mount header,
with friction lock, only fits the
socket housing in one way. The
socket housing may have wires
connected to it else it accepts
crimp terminals (sold separately).
These connectors are often used
to make PCB interconnections.
FRICTION LOCK HEADER
PLUGS PCB MOUNT
AC820
AC821
AC822
AC823
AA662
AA663
AA664
AA666
SINGLE ROW HEADER
PLUGS AND SOCKETS
Pin
Pin
Pin
Pin
07.22
GB617
GB619
GB621
GB623
GB625
GB627
GB629
2
3
4
5
6
7
8
Pin
Pin
Pin
Pin
Pin
Pin
Pin
GB631
GB633
GB635
GB637
GB639
GB641
GB643
9 Pin
10 Pin
11 Pin
12 Pin
13 Pin
14 Pin
15 Pin
FRICTION LOCK SOCKET
HOUSINGS WITH WIRE
CRIMP TERMINAL FOR
WIRE-TO-WIRE PLUG HOUSING
DIN SOCKETS
AND PLUGS
AD031 Pin Crimp Terminal for Plug
AB463
GB460
AB464
AB465
GB200
AB466
AB467
AB468
AB469
AB694
2 pin, with 15cm wires
CRIMP TERMINAL
FOR SOCKET HOUSING
SCREWLOCK MULTIPIN
CONNECTORS
Note: These are RF shielded, circular, multipin connectors. Two
connectors are fastened together
with a screwlock mechanism.
Contact Rating: max. 0.5A / 50V
AB437 2 Pin DIN Plug
AB438 In-line 2 Pin DIN Socket
PANEL MOUNT
SCREWLOCK MULTIPIN PLUGS
AB439 2 Pin DIN Panel Mount Socket
GB644 Crimp Terminal
WIRE-TO-WIRE
POWER CONNECTOR
PLUG / SOCKET SETS
Note: Panel mount plugs that
have solder connections at the
back.
Panel hole diameter: 15.7mm
Panel thickness: 6mm maximum
AC738
AC739
AC740
AC741
2
3
4
5
Pin
Pin
Pin
Pin
AC742 6 Pin
AC743 7 Pin
AC744 8 Pin
FB967 4 Pin, PCB Mount Mini DIN
Socket
IN-LINE
SCREWLOCK MULTIPIN SOCKETS
AB151 4 Pin, Mini-DIN Plug
Note: These connectors can be
used for wiring harnesses that
make multiple, high current, wireto-wire connections.
These connectors are sold in
sets. Each set consists of one
plug housing, one matching
socket housing and the required
crimp terminals.
Current Rating: 8A / 50V
Voltage Rating: 300Vac
Pin Spacing: 6.2mm
Accepts wires: 0.5 to 2.1mm²
Housing: Nylon UL 94V-0
Crimp Terminals: tin-plated phosphor bronze
AD023
AD024
AD025
AD026
1x2
1x3
1x4
2x2
Pole
Pole
Pole
Pole
Note: Each in-line socket has a
built-in cable clamp.
Internal solder connections.
Cable diameter: 5 - 7mm
AC745
AC746
AC747
AC748
2
3
4
5
Pin
Pin
Pin
Pin
AC749 6 Pin
AC750 7 Pin
AC751 8 Pin
AB441 In-line 4 Pin Mini-DIN Socket
MB152 5 pin, 180° DIN Plug
IN-LINE
SCREWLOCK MULTIPIN PLUGS
AA533 5 pin, 180° In-Line DIN Socket
AD027 2x3 Pole
AD028 3x3 Pole
AD029 3x4 Pole
CRIMP TERMINAL FOR
WIRE-TO-WIRE SOCKET HOUSING
AD030 Pin Crimp Terminal for Socket
Note: Each in-line plug has a
built-in cable clamp.
Internal solder connections.
Cable diameter: 5 - 7mm
AC752
AC753
AC754
AC755
2
3
4
5
Pin
Pin
Pin
Pin
MB153 5 pin, 180° Panel Mount DIN
Socket
AC756 6 Pin
AC757 7 Pin
AC758 8 Pin
AB442 6 Pin Mini-DIN Plug
07.23
Stereo 6 pin Din Plug (5 pins
over 180° + 1 centre pin)
FB873 Adapter BNC Socket to N Plug
AB443 In-line 6 Pin Mini-DIN Socket
FB911
6 pin, (5 pin, 240° + 1 centre pin)
DIN Plug
GB376 Keyboard PS2 Lead, 6 Pin MiniDIN Socket to Plug, 2m
FB863 Adapter BNC Socket to SMA Plug
FB850 Adapter BNC Socket to TNC Plug
FB893 6 pin, (5 pin, 240° + 1 centre pin)
Panel Mount DIN Socket
GB703 Keyboard PS2 Adapter, 5 pin,
180° DIN Socket to 6 Pin MiniDIN Plug
BNC / TNC / SMA
CONNECTORS
FB862 Adapter BNC Socket to UHF / PL
Plug
AA785 7 pin, 270° DIN Plug
EB431 Adapter BNC Plug to F Socket
FB871 Adapter SMA Socket to TNC Plug
AC695 Adapter BNC Socket to F Plug
JB201
FB934 7 pin, 270° Panel Mount DIN
Socket
BNC Plug 50 Ohm Terminator
FB885 8 pin, (7 pin, 240° + 1 centre pin)
DIN Plug
EB430 Adapter BNC Plug to RCA Socket
AC681 90° Black Insulated BNC Plug
with screw connection
FB855 Adapter BNC Socket to RCA Plug
AC999 S-Video Cable, 4 pin Mini-Din Plug
to 4 pin Mini-Din Plug, 5m
FB849 BNC Plug for TV coaxial cable
7mm max. diameter coaxial cable
FB837 Adapter BNC Plug to TV PAL
Socket
GB695 Adapter 8 pin Mini-Din Plug to
Stereo 3.5mm Jack Plug, 2m
AC687 Adapter BNC Socket to TV PAL
Plug
FB875 Adapter BNC Plug to UHF / PL
Socket
GB696 Adapter 8 pin Mini-Din Plug to
07.24
MB130 BNC Plug, twist-on for RG58/U,
50 Ohm, 5mm diameter cable
EB334 BNC Plug, twist-on for RG59/U,
75 Ohm, 6.2mm diameter cable
AC679 BNC Plug, crimp-on for RG58/U,
AC680 BNC Plug, crimp-on for RG59/U,
EB816 T Adapter BNC Plug to 2 BNC
Sockets
AB264 In-line BNC Socket twist-on
for RG58/U, 50 Ohm,
5mm diameter coaxial cable
EB333 In-line BNC Socket twist-on
for RG59/U, 75 Ohm,
6.2mm diameter coaxial cable
AC699 SMA Connector SMA Socket to
SMA Socket
FB860 TNC Plug, twist-on for RG58/U
GB743 In-line TNC Socket crimp-on
for RG58/U, 50 Ohm,
AC682 Panel Mount Insulated BNC Socket,
5mm diameter coaxial cable
solder connections, IEC1010 rated,
N / PL259 (UHF) TYPE
CONNECTORS
FB853 Adapter Mini UHF Socket to SMA
Plug
FB872 Adapter N Socket to SMA Plug
EB328 Panel Mount TNC Socket,
solder connections,
AC683 Panel Mount BNC Socket
with square mounting plate,
solder connections,
9.5mm diameter panel hole
FB877 Adapter N Socket to TNC Plug
FB882 SMA Plug crimp-on
AA740 Panel Mount BNC Socket,
solder connections,
FB848 Adapter SMA Socket to UHF / PL
Plug
AC696 In-line SMA Socket crimp-on
AC907 Adapter TNC Plug to N Plug
AC686 BNC Connector BNC Socket to
BNC Socket
AC697 Panel Mount SMA Socket,
solder connections,
FB878 Adapter TNC Socket to N Plug
FB852 L Adapter BNC Socket to BNC Plug
AC698 Panel Mount SMA Socket,
with square mounting plate,
crimp-on connections,
FB836 Adapter UHF / PL Socket to N Plug
FB842 Adapter UHF / PL Socket to TNC
Plug
AC688 T Adapter BNC Socket to 2 BNC
Sockets
FB880 L Adapter SMA Socket to SMA
Plug
07.25
FB857 UHF / PL Twist-On Plug for RG59
coaxial cable
AA415 2m
AA417 5m
AB452 TV Panel Mount (PAL) Socket
FB846 Gold-Plated TV Adapter PAL Plug
to F Socket
FB843 Adapter RCA Socket to UHF / PL
Plug
RADIO / TV / SATELLITE
CO-AX CONNECTORS
AD264 TV Outlet Box with PAL Socket
FB854 TV Adapter PAL Socket to F
Socket
EB883 Car radio Aerial Plug
AA726 TV PAL Plug
AB440 In-line Car Radio Aerial Socket
AC694 TV Adapter PAL Socket to F
Plug
EB157 TV In-Line PAL Socket
FB861 L Adapter F Socket to F Plug
AB453 Adapter TV (PAL) Socket to
3.5mm Mono Jack Plug
AB449 RF shielded TV coaxial (PAL) plug
AD225 T Adapter 3 x F Sockets
EB158 Samoosa TV Adapter PAL Plug
to 2 PAL Sockets
AB450 RF shielded in-line TV coaxial
(PAL) socket
AC689 F Plug, crimp-on for RG58/U,
AC690 F Plug, crimp-on for RG59/U,
FB496 RF shielded TV T-adapter PAL
plug to 2 PAL sockets
FB831 TV L shaped PAL Plug
AA728 Screwless TV coaxial cable
Connector
AB448 TV L shaped PAL Socket
AA727 TV Connector PAL Socket to PAL
Socket
AC691 F Plug, twist-on for RG58/U,
AC692 F Plug, twist-on for RG59/U,
AB451 TV Panel Mount (PAL) Plug
Note: TV Coaxial lead PAL socket
to PAL plug
07.26
AC693 Panel Mount F Socket,
solder connections,
TERMINAL / CONNECTOR wire acceptance x hole size.
TAGS AND
DB253 1.5mm x 4mm, 1mm thick
EB192 1.5mm x 5mm, 1mm thick
PRESS CONNECTORS
SOLDERING TERMINALS 50pcs
EB193
EB194
EB155
EB195
FORKED SPADE
CRIMPING CONNECTORS
2.5mm x 4mm, 1mm thick
2.5mm x 5mm, 0.8mm thick
3.5mm x 6mm, 1.3mm thick
3mm x 5mm, 1.2mm thick
SOLDERLESS, INSULATED
CRIMPING CONNECTORS
AB647
A mixed pack that contains 50 soldering terminals.
ORDER CODE: AB647
PCB MOUNT BLADE CONNECTOR
PACK OF 100pcs
Note: Insulated connectors that
are crimped onto wire and do not
have to be soldered. One can use
a crimping tool like (AC737).
Made of tin-plated copper with an
insulating plastic sleeve.
Colour of Sleeving:
Red:
use wire diameter: 0.6 - 1.2mm
wire size: 0.5 - 1.0mm²
Blue:
wire size: 1.0 - 2.5mm²
Yellow:
wire size: 2.5 - 6mm²
RING CRIMPING CONNECTORS
RED
AC719 blister pack containing 10 pieces of
forked connector with 3.7mm gap
BLUE
YELLOW
PCB mount blade connector. Pack of 100
pieces. Dimensions: 11mm length, 2.8mm
width, 0.8mm thick for 1mm diameter hole.
ORDER CODE: AB631
PCB MOUNT BLADE CONNECTOR
BLADE / RECEPTACLE
CRIMPING CONNECTORS
RED
ring connector with 3.7mm hole
PCB mount blade connector
Dimensions: 16mm length, 6.3mm width
ORDER CODE: AC736
RING LUG
PACK OF 30pcs
blade connector, 2.8mm wide
FB408 ring connector with 5.3mm hole
FB336 receptacle connector, 2.8mm
AC791 packet containing 100 pieces of
receptacle connector, 2.8mm
BLUE
Ring Lug. Pack of 30 pieces. Dimensions:
23mm length, 13mm width, 0.5mm thick, 6.5
x 9.5mm hole.
ORDER CODE: AB634
CRIMPING RING LUGS
RED
FB332 blade connector, 4.8mm wide
AA197 receptacle connector, 4.8mm
YELLOW
AA195 blade connector, 6.35mm wide
AA196 receptacle connector, 6.35mm
BLUE
Note: Uninsulated Crimping Ring
Lugs. Dimensions indicated are
07.27
YELLOW
AA199 bullet connector socket
bullet connector socket
BLUE
FB328 bullet connector plug
bullet connector plug
AB426 3 Wires Press Connector, green
0.4 - 0.8mm diameter wire
FB330 bullet connector socket
bullet connector socket
ROUND PIN
CRIMPING CONNECTOR
Note: These connectors are used
on the ends of multi stranded
wire to prevent wire fraying.
AA194 red 1.9mm dia. pin connector
red 1.9mm dia. pin connector
INSULATED RECEPTACLE
CRIMPING CONNECTORS
FB326 blue 1.9mm dia. pin connector
blue 1.9mm dia. pin connector
AB427 4 Wires Press / Splice Connector,
green, 0.9 - 1.3mm diameter wire
LOUDSPEAKER
CONNECTORS
LOUDSPEAKER
CONNECTION TERMINALS
Note: Loud speaker connection
terminals are black and red. It
accepts wires with diameters up
to 2.5mm. These terminal blocks
can be used where wire connections have to be changed easily
and quickly.
FB327 yellow 2.8mm dia. pin connector
yellow 2.8mm dia. pin connector
RED
insulated receptacle, 6.35mm
INSULATED BUTT / SPLICE
CRIMPING CONNECTORS
FB753 2 Lever Loudspeaker Terminal
square, 55 x 55mm
BLUE
insulated receptacle, 6.35mm
PIGGY-BACK
CRIMPING CONNECTORS
Note: Each connector is used to
make a permanent joint between
two wires.
FB754 2 Lever Loudspeaker Terminal
round, 76.2mm diameter
RED
butt connector
RED
piggy-back connector, 6.35mm
BLUE
piggy-back connector, 6.35mm
BULLET
CRIMPING CONNECTORS
BLUE
butt connector
YELLOW
butt connector
PRESS / SPLICE CONNECTORS
AD007 Professional loudspeaker connector
Panel Mount Socket, 4 pins,
round, 50mm diameter
solder connections
RED
AA198 bullet connector plug
bullet connector plug
AB425 2 Wires Press Connector, orange
0.4 - 0.8mm diameter wire
07.28
In-line Socket, 4 pins
solder connections
Plug with Lock Lever, 4pins,
screw connections
TERMINAL BLOCKS
PCB Screw connectors
Note: The PCB connectors can
be mounted directly onto a PCB.
The 2 and 3 screw connectors
can be stacked to create any
number of terminals. Connector
pins have 5.08mm pitch.
JB044
connecting to wires. Header
plugs are directly mounted (soldered) onto PCBs. The sockets
fit the header plugs only in one
way.
Current Rating: 10A / 300V
Accepts wires up to 2mm diameter
Connector pins have 5.08mm
pitch
JB220
JB221
JB222
JB223
35mm
35mm
44mm
44mm
Black Insulated
Red Insulated
Black Insulated
Red Insulated
AC711 55mm Black Battery Clip with Screw
AC712 55mm Red Battery Clip with Screw
PLUG-IN CABLE MOUNTING
SOCKETS
AB540
AB541
AB542
AB543
2
3
5
8
Pin
Pin
Pin
Pin
AB996 55mm Red Insulated Battery Clip
AB997 55mm Black Insulated Battery Clip
PLUG-IN PCB MOUNT
HEADER PLUGS
PCB Mounted 2 Screw Terminal
Block, 2.3mm holes, 5mm Pitch
AB544
AB545
AB546
AB547
2
3
5
8
EB314 80mm Red Battery Clip
EB315 80mm Black Battery Clip
Pin
Pin
Pin
Pin
SET OF 10 CROCODILE CLIPS
90° PLUG-IN PCB MOUNT
HEADER PLUGS
Blister pack that contains 5 PCB mount
2-screw terminal blocks: 5 x (JB044).
ORDER CODE: AB738
AB548
AB549
AB550
AB551
2
3
5
8
A very useful pack containing ten pieces of
insulated stranded wire of different colours
terminated at each end by an insulated crocodile clip of the same colour.
ORDER CODE: MB140
Pin
Pin
Pin
Pin
12 SEGMENT PVC
STRIP CONNECTORS
JB045
PCB Mounted 3 Screw Terminal
Block, 2.3mm holes, 5mm Pitch
PLUG-IN AND SCREW
PCB MOUNT CONNECTORS
WIRE CLIPS
40mm WIRE CLIPS
MB032 3A
AC678 10A
AA933 15A
2.7mm holes
4.0mm holes
4.3mm holes
CROCODILE CLIPS
Note: Clips that have retractable
connecting hooks. Each clip has
a solder connection.
Note: Plug-in terminal connectors that are used in plug-andsocket pairs. It is ideal for making easily removable wiring harness to PCB connections.
Sockets have screw terminals for
AC713 black
AC714 red
FB902
AB218
AB219
AB220
JB218
JB219
27mm White Insulated
27mm Blue Insulated
27mm Green Insulated
27mm Yellow Insulated
27mm Black Insulated
27mm Red Insulated
07.29
135mm WIRE CLIPS
Note: Clips that have retractable
connecting hooks and are suitable for connecting to 4mm
banana plugs / connecting
cables.
GB549 Heatsink for TO3/TO66/TO220
45x45x24mm, 7.7°C/W
AC885 Heatsink without holes
75x173x28mm, 1.8°C/W
AB020 black
AB021 red
THERMAL
MANAGEMENT
GB297 Heatsink T0220
27x31x33mm, 17°C/W
HEATSINKS
Note: The thermal resistance of a
heatsink gives one an indication
of how well it can conduct
(absorb) heat at the mounting
surface and radiate the heat to
the surrounding air. The smaller
the thermal resistance is, the better the heatsink transfers heat.
Measured in Kelvin per Watt K/W
or Degrees Celsius per Watt
°C/W (these are the same).
AB267 Heatsink for 2 x TO3’s
75x120x64mm, 1.6°C/W
AB266 Heatsink without holes
75x120x64mm, 1.6°C/W
HEATSINK ACCESSORIES
GB235 Heatsink vertical mount, TO220
12x34x40mm, 8°C/W
AB007 Heatsink vertical mount,
TO220/TO3P, 12x35x44mm,
10.9°C/W
AA623
PB281
GB172
DB315
DB314
DB312
DB311
DB313
Heat Sink Compound 25g
Heat Sink Compound 150g
Greaseless Insulator for TO220
Insulating Bushes for TO220
Insulating Bushes for TO3
Mica Insulator for TO220 1.2 K/W
Mica Insulator for TO3, 0.3K/W
Mica Insulator for TOP3, 0.8K/W
COOLING BRUSHLESS
FANS
GB548 Heatsink TO5/TO39 clip on
15x15x9mm, 55°C/W
DB018 Heatsink TO220 clip on 25°C/W
AB008 Heatsink vertical mount,
TO220/TO3P, 20x36x38mm,
9.6°C/W
AA787 Heatsink TO126/TO220
25x15x20mm, 18.2°C/W
GB550 Heatsink vertical mount,
TO220/TO3P, 42x38x25mm,
5°C/W
HB262 Heatsink TO220/TO3P
30x25x13mm, 15.5°C/W
PB243 Heatsink for TO3
45x45x24mm, 7.7°C/W
AC824 Heatsink without holes
50x62x17.5mm, 4°C/W
07.30
EB345 12VDC Brushless Fan
40x40x10mm sleeve bearing
EB264 12VDC Brushless Fan
PB308 12VDC Brushless Fan
AD165 12VDC Brushless Fan
80x80x25mm ball bearing
FB266 12VDC Brushless Fan
FB489 12VDC Brushless Fan
AA282 24VDC Brushless Fan
FB499 115VAC Brushless Fan
PB307 230VAC Brushless Fan
120x120x38mm ball bearing
METAL FINGER GUARDS
AC647 a box that contains 10 pieces of
250mA fast 20 x 5mm fuses
FUSES 30pcs
JB023 a single 315mA fast 20 x 5mm fuse
AD076 a single 400mA fast 20 x 5mm fuse
AD077 a box that contains 10 pieces of
AD150 Finger Guard for 80x80mm Fan
mounting hole spacing: 71.5mm
AD151 Finger Guard for 120x120mm Fan
mounting hole spacing: 104.5mm
PELTIER MODULE
PELTIER MODULE 40 X 40MM
This is a Peltier effect thermoelectric cooling
module. It consists of 127 p-n junctions that
are connected electrically in series, but thermally in parallel, sandwiched between 2
ceramic faceplates. When current is passed
through the module heat is pumped from
one surface and deposited on the opposite
surface, (hot side), of the module. Heat must
be removed from the hot side by a heat sink
or cooling fan to prevent the module from
overheating.
Specifications:
Supply Voltage: 15.4Vdc max.
Power (Q max.): 51.4Watt max.
Temperature difference (delta T):
67°C max at an ambient temperature of
30°C with no load
number of couples: 127
Weight: 21.8g
ORDER CODE: AB103
CIRCUIT
PROTECTION
FUSES
Note: Fuses are used to protect
electric circuits against too high
electric currents. A fuse disconnects permanently when the current flowing through it exceeds
the fuse rating.
AB653
A mixed pack that contains 30 fuses.
ORDER CODE: AB653
FAST-ACTING PICO FUSES
Note: Pico fuses are space saving and axially leaded. Each fuse
has a protective sleeving. Clearly
marked. Fast-acting.
Body Dimensions: 4 x 10mm
AB472
AB473
AB345
AB474
AB346
AB475
AB347
100mA
150mA
250mA
300mA
500mA
800mA
1A
AB476
AB477
AB478
AB479
AB480
AB481
1.5A
2A
2.5A
3A
4A
5A
AB031 a single 630mA fast 20 x 5mm fuse
JB026 a single 1A fast 20 x 5mm fuse
1A fast 20 x 5mm fuses
AD078 a single 1.25A fast 20 x 5mm fuse
1.25A fast 20 x 5mm fuses
JB027 a single 1.6A fast 20 x 5mm fuse
EB128 a single 3.5A fast 20 x 5mm fuse
JB031
Note: The fuses are either fastor slow-acting.
Construction: glass cartridge, silvered caps.
Voltage rating: 250Vac
a single 4A fast 20 x 5mm fuse
EB928 a single 6.3A fast 20 x 5mm fuse
FAST-ACTING FUSES 20X5MM
AA563 a single 15A fast 20 x 5mm fuse
EB929 a single 160mA fast 20 x 5mm fuse
JB022
a single 250mA fast 20 x 5mm fuse
07.31
EB174 a single 25A fast 20 x 5mm fuse
SLOW-BLOW FUSES 20X5MM
AB037 a single 50mA slow 20 x 5mm fuse
50mA slow 20 x 5mm fuses
AB058 a single 8A slow 20 x 5mm fuse
8A slow 20 x 5mm fuses
AB039 a single 100mA slow 20 x 5mm fuse AB059 a single 10A slow 20 x 5mm fuse
CAR BLADE FUSES
Note: Fast-acting (19.1x18.7mm)
AA634
AA635
AA636
AA637
5 Amp
10 Amp
15 Amp
20 Amp
AA638
AA639
AB194
AB195
25 Amp
30 Amp
35 Amp
40 Amp
FUSE HOLDERS
FAST-ACTING FUSES 32X6.35MM
AA939
a single 100mA fast 32 x 6mm fuse
AA940 a single 200mA fast 32 x 6mm fuse
AB045 a single 400mA slow 20 x 5mm fuse AC663 a box that contains 10 pieces of
JB019
Fuse Holder Clip PCB Mount
require 2 clips per 20x5mm fuse
HB308 Fuse Holder PCB Mount with
Base for 20x5mm Fuse
AA946 a single 1.6A fast 32 x 6mm fuse
AB050 a single 1.25A slow 20 x 5mm fuse
1.25A slow 20 x 5mm fuses
AB482 Fuse Holder Cover for (HB308)
JB018
Fuse Holder In-line
for 20x5mm Fuse
FB471 Fuse Holder In-line
for 32x6.3mm Fuse
FB830 a single 6A fast 32 x 6mm fuse
JB017
Fuse Holder Panel Mounting
for 20x5mm Fuse
EB159 Fuse Holder Panel Mounting
for 32x6.3mm Fuse
AB483 In-line Fuse Holder
for Car Blade Fuses
07.32
AB484 Panel Mount Fuse Holder
for Car Blade Fuses
PTC RESETTABLE FUSES
table axial fuses that provide
upper limit temperature protection. The metal case of the fuse
is not isolated and will be at the
supply voltage.
Max. Current is 10A / 250V
The fusing-off temperature, at
which the fuse disconnects, is
indicated below.
AB485
AB486
AB487
GB694
AB488
AB489
AD049
AD050
GB679
Note: These are PTC resettable
fuses that are current and temperature sensitive. It is used to
permanently protect circuits
against short-circuit and overcurrent faults. It is a slow-acting
type of fuse. The holding current,
Ih, is the normal operating cur-
58°C the tolerance is ± 3°C
THERMAL
CIRCUIT BREAKERS
designed with surge limiting voltage characteristics within a
defined level. Circuits, equipment, and personnel are protected from abnormally high transient voltage caused by lightning, accidental contact with
power lines, or electromagnetic
induction by the sparkover that
occurs in the gas chamber at the
given voltage.
DB728 Gas tube arrestor single 90V axial
AC489 Gas tube arrestor double 90V
radial 3 pins
FB247 Gas tube arrestor double 350V
radial 3 pins
METAL OXIDE VARISTORS
(MOV)
rent of the PTC. The tripping current, It, is the current limit at
which the PTC’s resistance
increases rapidly to stop the current flowing through it. The PTC
will remain in a high resistance
state after it has been tripped. It
will automatically reset again if
the fault condition is removed.
Temperature Range: -40 to 85°C
Max. temp. when tripped: 125°C
Max. Current: 40A
Indicated Max. Voltage of PTC
Indicated Resistance is at 23°C
AD019 Ih=0.1A, It=0.2A, 60V, 2.5-7.5E
AD032 Ih=0.17A, It=0.34A, 60V, 2-7E
AD033 Ih=0.2A, It=0.4A, 60V, 1.5-4.4E
AD020 Ih=0.25A, It=0.5A, 60V, 1-3E
AD034 Ih=0.3A,
AD035 Ih=0.4A,
AD021 Ih=0.5A,
It=0.6A, 60V, 0.76-2.1E
It=0.8A, 60V, 0.52-0.86E
It=1A, 60V, 0.41-1.17E
AD036 Ih=0.65A,
AD037 Ih=0.75A,
It=1.3A, 60V, 0.27-0.72E
It=1.5A, 60V, 0.18-0.6E
AD022 Ih=0.9A, It=1.8A, 30V, 0.07-0.22E
AD038 Ih=1.1A, It=2.2A, 30V, 0.05-0.18E
AD039 Ih=1.35A, It=2.7A, 30V, 0.04-0.13E
AD040 Ih=1.6A, It=3.2A, 30V, 0.03-0.11E
AD041 Ih=1.85A, It=3.7A, 30V, 0.03-0.09E
AD042 Ih=2.5A, It=5A, 30V, 0.02-0.07E
Note: These are heat sensitive,
automatically resettable circuit
breakers. It can be used to provide upper limit temperature protection and can also be used in
automatic temperature control
systems. It is used in home
appliances like electric heaters.
Dimensions:
19mm diameter x 15mm height
Switching Type: normally closed
Switching Voltage: 240Vac
Contact Rating: 6A / 240Vac
(for resistive loads)
Operating Tolerance: ± 5%
Temperature Overshoot: 5 - 10°C
Auto-reset below the opening
temperature as indicated.
AD044
AD045
AC583
AD046
AD047
AB688
AD048
60°C
70°C
80°C
100°C
120°C
140°C
160°C
GAS TUBE ARRESTORS
AD043 Ih=3A, It=6A, 30V, 0.02-0.08E
THERMAL CUTOFF FUSES
Note: Heat sensitive non-reset-
Note: Gas tube arresters are
07.33
Note: Disc type varistors - radial
leaded, for overvoltage protection in a wide range of applications typically installed in PC
boards.
Benefits:
Eliminates Dangerous Voltage
Transients
Lowers Overall System Costs by
Reducing Downtime and
Maintenance Costs
Improves Component and
System Reliablity
Reduces Lightening Effects
Reduces EMP/RFI Interference
Promotes Personal Safety
Features:
Nanosec. Switching Response
Time,
High Transient Current Capability
(up to 100,000 Amps)
No Extinguishing or Follow-on
Current Limitations
Small Size for Compact Designs
Wide Operating Temperature
Range -40 to +85 degrees C
Excellent Clamping
Characteristics
Low Standby Power
Consumption
Tolerance: ±10%
AA305 MOV Suppressor 11VAC 14VDC
18V@1mA 11mm dia., 7mm pitch
FB239 MOV Suppressor 14VAC 18VDC
22V@1mA 15mm dia., 7.5mm pitch
AD085 MOV Suppressor 17VAC 22VDC
205V@1mA 15mm dia. 7.5mm pitch
EB349 MOV Suppressor 250VAC 320VDC
time to reach a maximum current
of Ipp, then current must reduce
to half Ipp within 1msec or less.
AD157 6.8V Bidirec. Transient Suppressor
Vbr 6.45-7.14Vdc@10mA, Vso 5.8V
Vc 10.5V@ Ipp 60A
AD158 15V Bidirec. Transient Suppressor
Vbr 14.3-15.8Vdc@1mA, Vso 12.8V
Vc 21.2V@ Ipp 29A
Vbr 22.8-25.2Vdc@1mA, Vso 20.5V
Vc 33.2V@ Ipp 19A
Vbr 25.7-28.4Vdc@1mA, Vso 23.1V
Vc 37.5V@ Ipp 16.8A
Vbr 28.5-31.5Vdc@1mA, Vso 25.6V
Vc 41.4V@ Ipp 15A
Vbr 31.4-34.7Vdc@1mA, Vso 28.2V
Vc 45.7V@ Ipp 13.8A
Vbr 34.2-37.8Vdc@1mA, Vso 30.8V
Vc 49.9V@ Ipp 12.6A
Vbr 190-210Vdc@1mA, Vso 171V
Vc 274V@ Ipp 2.2A
BIDIRECTIONAL TYPE
1500W PEAK PULSE POWER
Note: These are axially leaded,
bidirectional, fast acting transient
voltage suppressor diodes. It has
the same electrical characteristics in both directions. It is used
for overvoltage protection by
means of a voltage clamping
action. It will fail, becoming a
TRANSIENT VOLTAGE
permanent short-circuit, when
SUPPRESSOR DIODES
the power or pulse current rating
is exceeded.
UNIDIRECTIONAL TYPE
Dimensions of Central Part:
600W PEAK PULSE POWER
5.4mm diameter x 9.5mm length
Breakdown Voltage: Vbr
Vbr Tolerance: ±5%
Note: These are axially leaded,
No Surge, Stand-off Voltage: Vso
unidirectional, very fast acting
Clamping Voltage: Vc
transient voltage suppressor
Peak Pulse Current: Ipp
diodes. Its electrical characterisSurge Pulse Current: 10µs rise
tics are similar to those of a
time to reach a maximum current
zener diode. It is used for overof Ipp, then current decreases to
voltage protection by means of a
half Ipp within 1msec or less.
voltage clamping action. It will
fail when the power or pulse cur- AD136 6.8V Bidirec. Transient Suppressor
Vbr 6.45-7.14Vdc@10mA, Vso 5.8V
rent rating is exceeded. The
Vc 10.5V@ Ipp 150A
colour band is closest to the
cathode lead.
Vbr 11.4-12.6Vdc@1mA, Vso 10.2V
Vc 16.7V@ Ipp 90A
3.1mm diameter x 6.7mm length AD138 15V Bidirec. Transient Suppressor
Vbr 14.3-15.8Vdc@1mA, Vso 12.8V
Steady State Power Rating: 5Watt
Vc 21.2V@ Ipp 71A
Peak Forward Voltage: 3.5V / 50A AD139 16V Bidirec. Transient Suppressor
Breakdown Voltage: Vbr
Vbr 15.2-16.8Vdc@1mA, Vso 13.6V
Vc 22.5V@ Ipp 70A
Vbr Tolerance: ±5%
No Surge, Stand-off Voltage: Vso AD140 18V Bidirec. Transient Suppressor
Vbr 17.1-18.9Vdc@1mA, Vso 15.3V
Clamping Voltage: Vc
Vc 25.5V@ Ipp 59.5A
Peak Pulse Current: Ipp
Vbr 22.8-25.2Vdc@1mA, Vso 20.5V
Surge Pulse Current: 10µs rise
07.34
Vc 33.2V@ Ipp 45A
Vbr 25.7-28.4Vdc@1mA, Vso 23.1V
Vc 37.5V@ Ipp 40A
Vbr 28.5-31.5Vdc@1mA, Vso 25.6V
Vc 41.4V@ Ipp 38A
Vbr 31.4-34.7Vdc@1mA, Vso 28.2V
Vc 45.7V@ Ipp 33A
Vbr 34.2-37.8Vdc@1mA, Vso 30.8V
Vc 49.9V@ Ipp 30A
Vbr 37.1-41.0Vdc@1mA, Vso 33.3V
Vc 53.9V@ Ipp 28A
Vbr 332-368Vdc@1mA, Vso 299V
Vc 482V@ Ipp 3.2A
PASSIVE
COMPONENTS
INDUCTORS
SMD SHIELDED INDUCTORS
Note: These are SMD, shielded,
high frequency, inductors. It has
an enameled wire winding on a
ferrite core and enclosed inside a
ferrite housing. It is used for low
power DC/DC converters.
Width: W = 12.7mm
Height: H
RMS AC Current: Irms
DC Saturation Current: Isat
Self Resonant Frequency: SRF
AD185 47µH, H=6.5mm, SRF 7MHz min
Irms 1.25A max., Isat 2.5A max.
AD186 56µH H=8.5mm, SRF 16MHz min
AD187 220µH H=5.5mm, SRF 3MHz min
AXIAL INDUCTORS
Note: High frequency chokes
with a copper-wire winding on a
ferrite core. Colour coded.
Tolerance: ±10%
4mm diameter x 10.5mm length
Helpful Tip:
1000nH = 1µH
1000µH = 1mH
DB410
DB411
DB412
AB490
DB413
AB491
DB414
DB415
DB416
DB417
DB418
DB419
DB420
DB421
DB422
DB423
DB424
DB425
DB426
DB427
DB428
DB429
DB430
DB431
DB432
DB433
DB434
DB435
DB436
DB437
DB438
DB439
DB440
DB441
DB442
DB443
DB444
DB445
DB446
DB447
AB492
AB493
AB494
AB495
GB227
100nH, Irms 630mA max.
1µH, Irms 650mA max.
1.5µH, Irms 580mA max.
1mH, Irms 70mA max.
1.5mH, Irms 40mA max.
10mH, Irms 10mA max.
TOROIDAL INDUCTORS
Note: These are linear, high frequency, RF chokes. Wire wound
on toroidal core. They are indispensable in the field of power
electronics. It is used for mains
filters in power supplies, control
of DC or stepper motors, chopper amplifiers etc.
Indicated outer dimensions:
diameter x thickness
AB504
GB243
AB505
AB506
AB507
AB508
AD226
AB509
AD227
50µH, 26x11mm, Irms 3.5A max.
1mH, 35x15mm, Irms 1.7A max.
1.4mH, 24x12.5mm, Irms 1.7A max.
2.2mH, 27x12mm, Irms 0.7A max.
2.3mH, 15.5x8mm, Irms 2.1A max.
FERRITE BAR INDUCTORS
GB294 Coil & Ferrite Bar set for Radio
(DIY Kit 63)
35V
HB196
HB197
HB212
HB198
HB199
HB200
HB214
10µF
22µF
33µF
47µF
100µF
220µF
330µF
HB192
HB193
HB194
HB274
HB195
HB217
HB218
HB219
HB220
0.47µF
1µF
2.2µF
3.3µF
4.7µF
10µF
22µF
33µF
47µF
HB244
HB179
HB180
HB181
HB182
HB229
HB230
HB231
HB232
0.47µF
1µF
2.2µF
3.3µF
4.7µF
10µF
22µF
33µF
47µF
HB275
HB276
HB277
HB278
HB279
HB280
HB281
HB282
0.47µF
1µF
2.2µF
3.3µF
4.7µF
10µF
22µF
33µF
INDUCTORS AND CHOKES 50pcs
HB201
HB202
HB203
HB216
HB204
AC484
470µF
1000µF
2200µF
3300µF
4700µF
10mF
50V
HB221
HB222
HB223
HB224
HB225
HB226
HB227
HB228
AB343
100µF
220µF
330µF
470µF
1000µF
2200µF
3300µF
4700µF
10mF
63V
AB639
A mixed pack that contains 50 inductors and
RF chokes.
ORDER CODE: AB639
CAPACITORS
ELECTROLYTIC CAPACITORS
(RADIAL)
HB233
HB234
HB235
HB236
HB237
HB238
MB083
MB084
FB461
100µF
220µF
330µF
470µF
1000µF
2200µF
3300µF
4700µF
10mF
100V
HB283
HB284
HB285
HB286
HB287
MB102
MB103
47µF
100µF
220µF
330µF
470µF
1000µF
2200µF
160V
AC306 100µF
250V
Note: These Electrolytic capacitors are suitable for use on printed circuit boards. These capacitors are polarity sensitive. The
longer lead is positive (anode)
and the shorter lead is negative
(cathode). Operating temperature: -25 to +85ºC. Surge voltage
is 25% higher than rated working
voltage. Tolerance: ±20%.
Leakage current: 0.02xCxV+3µA.
Helpful Tip:
1000nF = 1µF
1000µF = 1mF
HB370
AC485
AC486
HB371
HB372
HB373
1µF
2.2µF
4.7µF
10µF
22µF
33µF
JB206
JB207
AC309
JB208
AC307
1µF
2.2µF
3.3µF
4.7µF
10µF
16V
HB379
HB380
HB381
HB382
HB183
HB184
HB211
HB185
HB186
HB187
HB213
10µF
22µF
33µF
47µF
100µF
220µF
330µF
HB245
HB246
HB247
HB248
HB249
HB250
HB251
10µF
22µF
33µF
47µF
100µF
220µF
330µF
HB188
HB189
HB190
HB215
HB191
AC310
AC482
470µF
1000µF
2200µF
3300µF
4700µF
6800µF
10mF
25V
HB252
HB253
HB254
HB255
HB256
AC311
AC483
07.35
470µF
1000µF
2200µF
3300µF
4700µF
6800µF
10mF
HB374
HB375
HB376
HB377
HB378
AA786
47µF
100µF
220µF
330µF
470µF
1000µF
350V
AC308
JB209
JB210
JB211
22µF
33µF
47µF
100µF
400V
AC487 330µF
AC488 470µF
450V
1µF
2.2µF
10µF
22µF
HB272
HB383
HB384
HB385
33µF
47µF
100µF
220µF
LOW IMPEDANCE
(RADIAL)
case is fully insulated. A safety
vent is located in the bottom of
the case. Used for switching
power supplies, power storage
for digital equipment, energy
storage in pulse systems and
electric filters.
Temperature Range: -55 to +85ºC
Tolerance: 20%
40V
Note: These capacitors have a
low impedance: low ESR (equivalent series resistance). It has a
long operating life. It is used for
switching power supplies and
high frequency applications.
Tolerance: ±20% at 120Hz, 20ºC
Temperature Range:
-40 to +105ºC
Maximum impedance is indicated
at 20ºC, 100kHz
Maximum RMS ripple current is
indicated at 105ºC, 100kHz
Dimensions: diameter x length
AC329 4700µF
AC330 10 000µF
AC331 15 000µF
1µF, 5.3x12mm
2.2µF, 5.3x12mm
4.7µF, 2 Ohm, 65mA, 5.3x12mm
10µF, 1.75 Ohm, 0.1A, 5.3x12mm
22µF, 0.8 Ohm, 0.2A, 6.3x12mm
33µF, 0.14A, 6.3x12mm
47µF, 0.56 Ohm, 0.3A, 8x12mm
100µF, 0.3A, 10x13mm
220µF, 0.08 Ohm, 0.7A, 10x21mm
330µF, 0.055 Ohm, 1.2A, 13x21mm
470µF, 0.053 Ohm, 1.6A, 13x26mm
1000µF, 0.05 Ohm, 2.9A, 16x31mm
50V
1µF
2.2µF
4.7µF
10µF
22µF
33µF
47µF
AB894
AB899
AB903
AB893
1µF
2.2µF
4.7µF
10µF
EB760
EB773
EB785
EB794
EB766
EB782
EB803
100µF
220µF
330µF
470µF
1000µF
2200µF
4700µF
100V
AB898
AB902
EB755
AB896
22µF
47µF
100µF
220µF
250V
AB897 220µF
63V
350V
AC332 4700µF
AC333 10 000µF
AB900 2.2µF
DOUBLE LAYER, RADIAL,
ENERGY STORAGE CAPACITORS
100V
AC334 1000µF
AC335 10 000µF
ELECTROLYTIC CAPACITOR PACK
50 PIECES
63V
AC931
AC932
AC933
AC934
AC935
AC936
AC937
AC938
AC939
AC940
AC941
AC942
63V
EB767
EB768
EB789
EB761
EB776
EB786
EB798
AB632
A mixed pack that contains 50 electrolytic
capacitors.
ORDER CODE: AB632
(AXIAL)
high capacitance-to-volume ratio.
It can be used as a short-term,
back-up, voltage supply for low
power, digital circuits. These
capacitors are polarity sensitive.
Voltage Rating: 5.5Vdc max.
Temperature Rating: 70ºC max.
Pin Spacing: 5mm
AC825 47mF (that is 47 000µF) / 5.5Vdc
leakage current: 30 - 69µA
internal resistance: 120 Ohm / 1kHz
13mm diameter, 7mm height
AD098 2200µF, 0.032 Ohm, 3A, 18x36mm
AC826 1F (that is 1 000 000µF) / 5.5Vdc
leakage current: 30 - 315µA
internal resistance: 30 Ohm / 1kHz
21mm diameter, 7.5mm height
35V
AD099 3300µF, 0.02 Ohm, 2.6A, 16x36mm
25V
AD100 4700µF, 0.02 Ohm, 2.9A, 18x36mm
HIGH CAPACITANCE
(RADIAL)
NON-POLARISED
16V
EB756
EB769
EB783
EB790
100µF
220µF
330µF
470µF
EB774
EB796
EB757
AB895
EB784
22µF
47µF
100µF
220µF
330µF
AB892
EB775
AB901
EB758
EB771
10µF
22µF
47µF
100µF
220µF
EB797
EB759
EB772
EB793
47µF
100µF
220µF
470µF
EB762 1000µF
EB778 2200µF
EB799 4700µF
25V
EB791
EB763
EB779
EB787
EB800
470µF
1000µF
2200µF
3300µF
4700µF
35V
EB792
EB764
EB780
EB788
EB801
470µF
1000µF
2200µF
3300µF
4700µF
50V
high capacitance-to-volume ratio.
Protected against rapid charging
and discharging. The aluminium
EB765 1000µF
EB781 2200µF
EB802 4700µF
07.36
Note: These capacitors are not
polarity sensitive
100V
AA651 1µF
AA652 2.2µF
AA653 3.3µF
AA654 4.7µF
AA655 10µF
AA656 22µF
63V
AA657 33µF
AA658 47µF
AA659 100µF
AA660 220µF
TANTALUM CAPACITORS
low leakage current and impedance, very small physical size
and exceptional temperature stability. These capacitors are polarity sensitive. The longer lead is
positive (anode) and the shorter
lead is negative (cathode).
Suitable for coupling and
bypassing, filters, timing circuits
and general applications.
Tolerance: ±20%.
16V
DB285
DB286
DB287
DB288
AC364
2.2µF
3.3µF
4.7µF
10µF
15µF
DB273
AC362
DB274
DB275
DB276
AC363
DB277
AC366
DB278
0.1µF
0.15µF
0.22µF
0.33µF
0.47µF
0.68µF
1µF
1.5µF
2.2µF
DB289
DB290
DB291
DB292
22µF
33µF
47µF
100µF
35V
DB279
DB280
AC367
DB281
AC365
DB282
DB283
DB284
3.3µF
4.7µF
6.8µF
10µF
15µF
22µF
33µF
47µF
TANTALUM CAPACITOR PACK
100 PIECES
AB652
A mixed pack that contains 100 tantalum
capacitors.
ORDER CODE: AB652
CERAMIC CAPACITORS
SMD 1µF 16V CAPACITOR
CASE SIZE 1206
AC929 1uF 16V SMD ceramic capacitor
SMD 10µF 16V CAPACITOR
CASE SIZE 1210
DB184
DB185
DB186
AA464
DB187
150pF
180pF
220pF
270pF
330pF
DB200
AC272
DB201
DB202
47nF
56nF
68nF
100nF
MULTILAYER TYPE CAPACITORS
50V
AC930 10uF 16V SMD ceramic capacitor
THROUGH-HOLE CAPACITORS
AC475
AC476
AC477
AC478
AC337
AC338
AC339
AC340
AC479
1nF
2.2nF
3.3nF
4.7nF
10nF
22nF
33nF
47nF
68nF
AC336
DB203
DB204
DB205
DB206
GB568
GB569
GB570
AC928
100nF
150nF
220nF
330nF
470nF
680nF
820nF
1µF
3.3µF
DISK TYPE CAPACITORS 1000V
GB320 270pF
AA614 1nF
Note: These are general purpose,
cement coated, ceramic disc and
multilayer (monolithic) capacitors
with small case sizes. The values
larger than 100nF are multilayered capacitors. These capacitors are not polarity sensitive.
Tolerance: -20 and +85%
AA615 10nF
FB235 22nF
AD252 4.7nF
AD253 10nF
Helpful Tips:
Coding: Write down the first two
digits of the code. After this two
digits append the number of
zeros that is indicated by the
third digit of the code. The unit is
pF (pico Farad).
Capacitor Code : Capacitance
‘10’ or ‘100’: 10pF
Blister pack that contains 10 ceramic capaci‘101’: 100pF
tors of 100nF 50V: 10 x (DB202).
‘102’: 1000pF = 1nF
ORDER CODE: AB758
‘103’: 10 000pF = 10nF
CERAMIC CAPACITOR PACK 100pcs
‘104’: 100 000pF = 100nF
‘105’: 1000 000pF = 1µF
Example:
‘330’ = 33pF and ‘331’ = 330pF
AC341
AA450
AA451
AA452
DB175
AA453
AA454
DB176
AA455
DB177
AC275
DB178
AA456
AA457
AA458
DB179
AA459
DB180
AA460
DB181
DB182
AA461
AA462
DB183
AA463
1pF
1.8pF
2.2pF
2.7pF
3.3pF
3.9pF
4.7pF
5.6pF
6.8pF
8.2pF
9pF
10pF
12pF
15pF
18pF
22pF
27pF
33pF
39pF
47pF
56pF
68pF
82pF
100pF
120pF
AA465
DB188
DB189
AA466
DB190
DB191
AA467
AA468
DB192
DB193
AA469
DB194
AA470
DB195
DB196
AC273
AC274
DB197
AC342
AC343
AC344
DB198
AC270
DB199
AC271
07.37
390pF
470pF
560pF
680pF
820pF
1nF
1.2nF
1.5nF
1.8nF
2.2nF
2.7nF
3.3nF
3.9nF
4.7nF
5.6nF
6.8nF
8.2nF
10nF
12nF
15nF
18nF
22nF
27nF
33nF
39nF
AB635
A mixed pack that contains 100 ceramic
capacitors.
ORDER CODE: AB635
POLYESTER CAPACITORS
Note: Operating Temperature: -55
to +100°C (above 85% voltage
POLYPROPYLENE FILM
CAPACITORS
factor 1.25% per °C) These
capacitors are not polarity sensitive.
Capacitance Tolerance: ±10%
GB162 6.8pF to 40pF, yellow
HB386 10pF to 150pF, black
63V
DB257
AC250
DB258
DB259
DB260
DB261
DB262
AC346
DB263
DB264
DB265
1nF
1.5nF
2.2nF
3.3nF
4.7nF
6.8nF
10nF
15nF
22nF
33nF
47nF
AA159
AC345
AA160
AA161
AA162
AA163
AA164
AC349
AA165
AA166
AA167
AA168
AA169
1nF
1.5nF
2.2nF
3.3nF
4.7nF
6.8nF
10nF
15nF
22nF
33nF
47nF
68nF
100nF
DB266
DB267
AC347
DB268
DB269
DB270
DB271
AC324
DB272
AC348
AC315
68nF
100nF
150nF
220nF
330nF
470nF
680nF
820nF
1µF
1.5µF
2.2µF
Note: Operating Temperature:
-55 to +100°C
These capacitors are not polarity
sensitive.
Capacitance Tolerance: ±20%
150nF
220nF
330nF
390nF
470nF
680nF
1µF
1.5µF
2.2µF
3.3µF
4.7µF
6.8µF
AD171
AD172
AD173
AD174
15nF
22nF
33nF
47nF
56nF
68nF
82nF
100nF
150nF
220nF
AA503
AC251
AC312
AA489
AC252
AC313
AC256
AA504
AC314
DB698
AC253
AC353
AA780
DB476
1nF
1.2nF
1.5nF
2.2nF
2.7nF
3.3nF
3.9nF
4.7nF
6.8nF
10nF
12nF
15nF
18nF
22nF
DB483
DB484
AA782
DB485
AC320
DB486
AC318
10nF
22nF
33nF
47nF
68nF
100nF
150nF
DB480
AA779
DB491
DB482
DB475
AC243
AC326
AC244
AC245
100pF
220pF
330pF
470pF
330nF
390nF
470nF
680nF
1µF
1.5µF
2.2µF
3.3µF
4.7µF
AD175
AD176
AD177
AD178
680pF
1nF
1.5nF
2.2nF
AC259 220nF
AC260 470nF
AC261 1µF
1250V
AC264 100nF
1600V
AD240 47nF
2000V
AB522
AB523
AB525
AB526
680pF
1nF
1.5nF
3.3nF
AB527 4.7nF
AB528 6.8nF
AB529 10nF
FOIL CAPACITORS 100pcs
400V
AA781
DB477
AC323
DB478
DB699
DB479
AC328
AC321
DB481
EB140
AA616
AC248
AC249
33nF
47nF
82nF
100nF
150nF
220nF
330nF
390nF
470nF
680nF
1µF
1.5µF
2.2µF
1000V
AC319 33nF
250VAC
AD128
AD129
AD130
AD131
AD132
AD133
AD134
1nF
2.2nF
3.3nF
6.8nF
10nF
22nF
33nF
AD135
AD188
HB239
HB240
FB475
HB241
HB242
47nF
68nF
100nF
220nF
330nF
470nF
1µF
AC266 2pF to 10pF, yellow
7.6mm diameter x 10mm height
Voltage Rating: 250Vdc max.
HB206 2pF to 22pF, green
AC267 3.3pF to 33pF, brown
AC268 5.5pF to 40pF, grey
HB207 5.5pF to 65pF, yellow
AC265 7pF to 100pF, violet
AB655
A mixed pack that contains 100 foil type
capacitors.
ORDER CODE: AB655
630V
220nF
330nF
470nF
680nF
1µF
2.2µF
HB205 1.4pF to 10pF, yellow
5.5mm diameter x 6.8mm height
AC269 5.5pF to 80pF, red
TRIMMER CAPACITORS
DB487
AC327
GB329
AC247
AC246
GB321
Note: Miniature single turn trimmer capacitors that are suitable
for mounting directly onto a PCB.
It can be trimmed with a ceramic
adjuster of set (AD017).
Dielectric: polypropylene film
630V
AC263 22nF
AC262 47nF
AC258 100nF
AB521 470pF
AB524 2.2nF
250V
AC350
DB472
AC352
DB473
AA778
DB474
AC255
DB489
AC351
DB490
AD179 3.3nF
AD180 4.7nF
AD181 6.8nF
100V
100V
AA777
AA170
AA171
AC254
AA172
AA173
AA174
AC316
GB238
GB410
AC322
AC242
63V
Note: Miniature single turn trimmer capacitors that are suitable
for mounting directly onto a PCB
(printed circuit board). It can be
trimmed with a ceramic adjuster
of set (AD017).
Dimensions: 5mm lead pitch
Dielectric: ceramic
GB256 4.2pF to 20pF, red
07.38
GB289 60/160 pF AM/FM Tuning
Capacitor, 3 pins, 2 trimmers
GB290 Screw for Tuning Capacitor
(GB289), (2 required)
GB291 13mm Brass Extension for Tuning
Capacitor (GB289)
GB292 Screw for Knob/Extension of
Tuning Capacitor (GB289)
TRIMMER CAPACITORS 20pcs
AB640
A mixed pack that contains 20 trimmer
capacitors.
ORDER CODE: AB640
RESISTORS
SMD 0.25W 1% RESISTORS
CASE SIZE 1206
AC781 1k (resistor coding: 1001)
REEL OF SMD RESISTORS
5000pcs
CARBON FILM 0.125 (1/8)W 5%
EB040
EB041
EB042
EB043
EB044
EB045
EB046
EB047
EB048
EB049
EB050
EB051
EB052
EB053
EB054
EB055
EB056
EB057
EB058
EB059
EB060
EB061
EB062
EB063
EB064
EB065
EB066
EB067
EB068
EB069
EB070
EB071
EB072
EB073
EB074
EB075
EB076
EB077
EB078
EB079
EB080
EB081
EB082
EB083
1E
1.2E
1.5E
1.8E
2.2E
2.7E
3.3E
3.9E
4.7E
5.6E
6.8E
8.2E
10E
12E
15E
18E
22E
27E
33E
39E
47E
56E
68E
82E
100E
120E
150E
180E
220E
270E
330E
390E
470E
560E
680E
820E
1k
1.2k
1.5k
1.8k
2.2k
2.7k
3.3k
3.9k
EB084
EB085
EB086
EB087
EB088
EB089
EB090
EB091
EB092
EB093
EB094
EB095
EB096
EB097
EB098
EB099
EB100
EB101
EB102
EB103
EB104
EB105
EB106
EB107
EB108
EB109
EB110
EB111
EB112
EB113
EB114
EB115
EB116
EB117
EB118
EB119
EB120
EB121
EB122
EB123
EB124
EB125
EB126
4.7k
5.6k
6.8k
8.2k
10k
12k
15k
18k
22k
27k
33k
39k
47k
56k
68k
82k
100k
120k
150k
180k
220k
270k
330k
390k
470k
560k
680k
820k
1M
1.2M
1.5M
1.8M
2.2M
2.7M
3.3M
3.9M
4.7M
5.6M
6.8M
8.2M
10M
12M
15M
DB049
AC369
DB050
DB051
DB052
DB053
DB054
DB055
DB056
DB057
DB058
DB059
DB060
DB061
DB062
270E
300E
330E
390E
470E
560E
680E
820E
1k
1.2k
1.5k
1.8k
2.2k
2.7k
3.3k
DB093
DB094
DB095
DB096
DB097
DB098
DB099
DB100
DB101
DB102
DB103
DB104
AA957
DB105
1.2M
1.5M
1.8M
2.2M
2.7M
3.3M
3.9M
4.7M
5.6M
6.8M
8.2M
10M
12M
15M
Blister pack that contains 100 resistors of
220 Ohm 1/4W 5%: 100 x (DB048).
ORDER CODE: AB763
AC368
DB020
DB021
DB022
DB023
DB024
DB025
A reel of 1k Ohm 0.25W 1% SMD (surface
DB026
mount device) resistors. Resistor case size
DB027
1206. One reel contains 5000 SMD resistors. DB028
ORDER CODE: AC780
DB029
DB030
THROUGH-HOLE RESISTORS
DB031
DB032
RESISTOR PACK 200PCS
DB033
DB034
DB035
DB036
DB037
DB038
DB039
DB040
DB041
DB042
DB043
DB044
DB045
DB046
A mixed pack that contains 200 resistors.
DB047
ORDER CODE: AB624
DB048
AB624
0E
1E
1.2E
1.5E
1.8E
2.2E
2.7E
3.3E
3.9E
4.7E
5.6E
6.8E
8.2E
10E
12E
15E
18E
22E
27E
33E
39E
47E
56E
68E
82E
100E
120E
150E
180E
220E
DB063
DB064
DB065
DB066
DB067
DB068
DB069
DB070
DB071
DB072
DB073
DB074
DB075
DB076
DB077
DB078
DB079
DB080
DB081
DB082
DB083
DB084
DB085
DB086
DB087
DB088
DB089
DB090
DB091
DB092
07.39
3.9k
4.7k
5.6k
6.8k
8.2k
10k
12k
15k
18k
22k
27k
33k
39k
47k
56k
68k
82k
100k
120k
150k
180k
220k
270k
330k
390k
470k
560k
680k
820k
1M
1k Ohm 1/4W 5%: 100 x (DB056).
ORDER CODE: AB757
10k Ohm 1/4W 5%: 100 x (DB068).
ORDER CODE: AB759
AB311 Resistor Pack (480 resistors)
16 values x 30 each 1/4W 5%
E3-series carbon film 10E to 1M
AB312 Resistor Pack (610 resistors)
61 values x 10 each 1/4W 5%
E12-series carbon film 10E to 1M
METAL FILM 0.25 (1/4)W 1%
KB001
KB002
KB003
KB004
KB005
KB006
KB007
KB008
KB009
KB010
KB011
KB012
KB013
KB014
KB015
KB016
KB017
KB018
KB019
KB020
KB021
KB022
KB023
KB024
KB025
KB026
KB027
KB028
KB029
KB030
KB031
KB032
KB033
KB034
KB035
KB036
KB037
KB038
KB039
KB040
1.0E
1.1E
1.2E
1.3E
1.5E
1.6E
1.8E
2.0E
2.2E
2.4E
2.7E
3.0E
3.3E
3.6E
3.9E
4.3E
4.7E
5.1E
5.6E
6.2E
6.8E
7.5E
8.2E
9.1E
10E
11E
12E
13E
15E
16E
18E
20E
22E
24E
27E
30E
33E
36E
39E
43E
KB086
KB087
KB088
KB089
KB090
KB091
KB092
KB093
KB094
KB095
KB096
KB097
KB098
KB099
KB100
KB101
KB102
KB103
KB104
KB105
KB106
KB107
KB108
KB109
KB110
KB111
KB112
KB113
KB114
KB115
KB116
KB117
KB118
KB119
KB120
KB121
KB122
KB123
KB124
KB125
3.6k
3.9k
4.3k
4.7k
5.1k
5.6k
6.2k
6.8k
7.5k
8.2k
9.1k
10k
11k
12k
13k
15k
16k
18k
20k
22k
24k
27k
30k
33k
36k
39k
43k
47k
51k
56k
62k
68k
75k
82k
91k
100k
110k
120k
130k
150k
KB041
KB042
KB043
KB044
KB045
KB046
KB047
KB048
KB049
KB050
KB051
KB052
KB053
KB054
KB055
KB056
KB057
KB058
KB059
KB060
KB061
KB062
KB063
KB064
KB065
KB066
KB067
KB068
KB069
KB070
KB071
KB072
KB073
KB074
KB075
KB076
KB077
KB078
KB079
KB080
KB081
KB082
KB083
KB084
KB085
47E
51E
56E
62E
68E
75E
82E
91E
100E
110E
120E
130E
150E
160E
180E
200E
220E
240E
270E
300E
330E
360E
390E
430E
470E
510E
560E
620E
680E
750E
820E
910E
1.0k
1.1k
1.2k
1.3k
1.5k
1.6k
1.8k
2.0k
2.2k
2.4k
2.7k
3.0k
3.3k
KB126
KB127
KB128
KB129
KB130
KB131
KB132
KB133
KB134
KB135
KB136
KB137
KB138
KB139
KB140
KB141
KB142
KB143
KB144
KB145
KB146
KB147
KB148
KB149
KB150
KB151
KB152
KB153
KB154
KB155
KB156
KB157
KB158
KB159
KB160
KB161
KB162
KB163
KB164
KB165
KB166
KB167
KB168
KB169
160k
180k
200k
220k
240k
270k
300k
330k
360k
390k
430k
470k
510k
560k
620k
680k
750k
820k
910k
1.0M
1.1M
1.2M
1.3M
1.5M
1.6M
1.8M
2.0M
2.2M
2.4M
2.7M
3.0M
3.3M
3.6M
3.9M
4.3M
4.7M
5.1M
5.6M
6.2M
6.8M
7.5M
8.2M
9.1M
10M
METAL FILM 0.6W 5%
AC390
AC391
AC392
AC393
AC394
AC395
AC396
AC397
AC398
AC399
AC400
AC401
AC402
AC403
AC404
AC405
AC406
AC407
AC408
AC409
AC410
AC411
AC412
AC413
AC414
AC415
AC416
AC417
AC418
AC419
AC420
AC421
1E
1.2E
1.5E
1.8E
2.2E
2.7E
3.3E
3.9E
4.7E
5.6E
6.8E
8.2E
10E
12E
15E
18E
22E
27E
33E
39E
47E
56E
68E
82E
100E
120E
150E
180E
220E
270E
330E
390E
AC433
AC434
AC435
AC436
AC437
AC438
AC439
AC440
AC441
AC442
AC443
AC444
AC445
AC446
AC447
AC448
AC449
AC450
AC451
AC452
AC453
AC454
AC455
AC456
AC457
AC458
AC459
AC460
AC461
AC462
AC463
AC464
07.40
3.9k
4.7k
5.6k
6.8k
8.2k
10k
12k
15k
18k
22k
27k
33k
39k
47k
56k
68k
82k
100k
120k
150k
180k
220k
270k
330k
390k
470k
560k
680k
820k
1M
1.2M
1.5M
AC422
AC423
AC424
AC425
AC426
AC427
AC428
AC429
AC430
AC431
AC432
470E
560E
680E
820E
1k
1.2k
1.5k
1.8k
2.2k
2.7k
3.3k
AC465
AC466
AC467
AC468
AC469
AC470
AC471
AC472
AC473
AC474
1.8M
2.2M
2.7M
3.3M
3.9M
4.7M
5.6M
6.8M
8.2M
10M
AA073
AA074
AA075
AA076
AA077
AA078
AA079
AA080
AA081
AA082
AA083
AA084
AA085
AA086
AA087
AA088
AA089
AA090
AA091
AA092
AA093
AA094
AA095
AA096
AA097
AA098
AA099
AA100
AA101
AA102
AA103
AA104
AA105
AA106
AA107
AA108
AA109
AA110
AA111
AA112
AA113
AA114
AA115
AA116
1E
1.2E
1.5E
1.8E
2.2E
2.7E
3.3E
3.9E
4.7E
5.6E
6.8E
8.2E
10E
12E
15E
18E
22E
27E
33E
39E
47E
56E
68E
82E
100E
120E
150E
180E
220E
270E
330E
390E
470E
560E
680E
820E
1k
1.2k
1.5k
1.8k
2.2k
2.7k
3.3k
3.9k
AA117
AA118
AA119
AA120
AA121
AA122
AA123
AA124
AA125
AA126
AA127
AA128
AA129
AA130
AA131
AA132
AA133
AA134
AA135
AA136
AA137
AA138
AA139
AA140
AA141
AA142
AA143
AA144
AA145
AA146
AA147
AA148
AA149
AA150
AA151
AA152
AA153
AA154
AA155
AA156
AA157
AA958
AA158
AA285
4.7k
5.6k
6.8k
8.2k
10k
12k
15k
18k
22k
27k
33k
39k
47k
56k
68k
82k
100k
120k
150k
180k
220k
270k
330k
390k
470k
560k
680k
820k
1M
1.2M
1.5M
1.8M
2.2M
2.7M
3.3M
3.9M
4.7M
5.6M
6.8M
8.2M
10M
12M
15M
18M
CARBON FILM 1W 5%
DB110
DB348
DB349
DB350
DB111
DB351
DB352
DB353
DB112
DB354
DB113
DB355
DB114
DB356
DB357
DB358
DB115
1E
1.2E
1.5E
1.8E
2.2E
2.7E
3.3E
3.9E
4.7E
5.6E
6.8E
8.2E
10E
12E
15E
18E
22E
DB124
DB378
DB125
DB379
DB126
DB380
DB381
DB382
DB127
DB383
DB384
DB385
DB128
DB386
DB129
DB387
DB130
4.7k
5.6k
6.8k
8.2k
10k
12k
15k
18k
22k
27k
33k
39k
47k
56k
68k
82k
100k
DB359
DB360
DB361
DB116
DB362
DB117
DB363
DB118
DB364
DB365
DB366
DB119
DB367
DB368
DB369
DB120
DB370
DB121
DB371
DB122
DB372
DB373
DB374
DB123
DB375
DB376
DB377
27E
33E
39E
47E
56E
68E
82E
100E
120E
150E
180E
220E
270E
330E
390E
470E
560E
680E
820E
1k
1.2k
1.5k
1.8k
2.2k
2.7k
3.3k
3.9k
DB388
DB389
DB390
DB131
DB391
DB392
DB393
DB132
DB394
DB133
DB395
DB134
AA332
AA333
AA334
AA335
AA336
AA337
AA338
AA339
AA340
AA341
AA342
AA343
AC370
AC371
120k
150k
180k
220k
270k
330k
390k
470k
560k
680k
820k
1M
1.2M
1.5M
1.8M
2.2M
2.7M
3.3M
3.9M
4.7M
5.6M
6.8M
8.2M
10M
18M
22M
CARBON FILM 5W 5%
GB505 10k
DB503
DB504
DB505
AC383
DB507
DB508
DB509
DB510
DB511
DB512
DB513
DB514
DB515
DB516
DB517
AC379
DB519
DB520
DB521
DB522
DB523
DB524
DB525
0.1E
0.12E
0.15E
0.18E
0.22E
0.27E
0.33E
0.39E
0.47E
0.56E
0.68E
0.82E
1E
1.2E
1.5E
1.8E
2.2E
2.7E
3.3E
3.9E
4.7E
5.6E
6.8E
8.2E
10E
12E
15E
18E
22E
27E
33E
39E
47E
56E
68E
82E
100E
120E
150E
180E
220E
270E
330E
390E
470E
560E
680E
820E
1k
1.2k
1.5k
1.8k
2.2k
2.7k
3.3k
3.9k
4.7k
5.6k
6.8k
8.2k
10k
12k
15k
18k
22k
WIRE-WOUND 10W 5%
DB493
AC376
DB495
DB496
DB497
DB498
DB499
DB500
DB501
DB502
0.1E
0.12E
0.15E
0.18E
0.22E
0.27E
0.33E
0.39E
0.47E
0.56E
DB526
DB527
DB528
DB529
AC378
DB531
DB532
DB533
DB534
DB535
56E
68E
82E
100E
120E
150E
180E
220E
270E
330E
390E
470E
560E
680E
820E
1k
1.2k
1.5k
1.8k
2.2k
2.7k
3.3k
3.9k
4.7k
5.6k
6.8k
8.2k
10k
12k
15k
18k
22k
AB776
AB777
AB778
AB779
AB780
AB781
AB783
AB784
AB787
AB789
AB790
AB791
AB792
AB793
AB794
AB795
AB796
AB797
100E
120E
150E
180E
220E
270E
330E
390E
470E
680E
820E
1.0k
1.2k
1.5k
1.8k
2.2k
2.7k
3.3k
AB809
AB810
AB811
AB812
AB813
AB814
AB815
AB816
AB817
AB818
AB819
AB820
AB821
AB822
AB823
AB824
AB825
AB826
39k
47k
56k
68k
82k
100k
120k
150k
180k
220k
270k
330k
390k
470k
560k
680k
820k
1M
PCB MOUNT
PRESET / TRIMMER
POTENTIOMETERS
HIGH-POWER RESISTORS 50PCS
TRIMMING POTENTIOMETERS 50pcs
SINGLE ROW
RESISTOR NETWORKS
GB506 22k
DB338
DB146
DB339
DB147
DB340
DB341
DB342
DB148
DB343
DB344
DB345
DB149
DB346
DB150
DB347
DB151
AA322
AA323
AA324
AA325
AA326
AA320
AA327
AA328
AA329
AA330
AA331
AA321
AC372
AC373
AC374
AC375
DB536
DB537
DB538
DB539
DB540
DB541
AC384
DB543
DB544
DB545
DB546
DB547
DB548
DB549
AC386
AC387
AC388
AC377
AC380
AC381
AC382
AC385
A mixed pack that contains 50 high-power
resistors in the range of 1 to 7 Watt.
ORDER CODE: AB642
WIRE-WOUND 5W 5%
DB135
DB316
DB317
DB318
DB136
DB319
DB320
DB321
DB137
DB322
DB138
DB323
DB139
DB324
DB325
DB326
DB140
DB327
DB328
DB329
DB141
DB330
DB142
DB331
DB143
DB332
DB333
DB334
DB144
DB335
DB336
DB337
DB145
0.68E
0.82E
1E
1.2E
1.5E
1.8E
2.2E
2.7E
3.3E
3.9E
4.7E
5.6E
6.8E
8.2E
10E
12E
15E
18E
22E
27E
33E
39E
47E
Note: These are SIL, thick-film
resistor networks. It is used for
high density circuit design. It can
be used for multiple pull up or
pull down resistors. Each package contains resistors that have
one common connection at pin 1
(closest to the dot). Each internal
resistor is rated (1/8) Watt
Resistor Tolerance: 5%
Note: These are 5 pin SIL resistor
networks. Each contains 4 identical resistors. Pin pitch: 2.54mm.
GB266 100k
10E
12E
15E
18E
22E
27E
33E
39E
47E
56E
68E
7MM MINIATURE PCB MOUNT
PRESET POTENTIOMETERS
GB339
GB263
GB333
GB231
GB226
GB157
200E
10k
20k
100k
500k
1M
Koa trimpot
Koa trimpot
trimpot
Koa trimpot
Koa trimpot
Koa trimpot
10MM PRESET POTENTIOMETER
HORIZONTAL MOUNT
Note: These are 9 pin SIL resistor
networks. Each contains 8 identical resistors. Pin pitch: 2.54mm
AB765
AB766
AB767
AB768
AB769
AB770
AB771
AB772
AB773
AB774
AB775
AB626
A mixed pack that contains 50 preset potentiometers.
ORDER CODE: AB626
AB798
AB799
AB800
AB801
GB207
AB803
AB804
AB805
AB806
AB807
AB808
07.41
3.9k
4.7k
6.8k
8.2k
10k
12k
15k
18k
22k
27k
33k
AC291
DB162
DB298
DB163
DB164
DB299
DB165
DB166
DB300
47E
100E
220E
470E
1k
2.2k
4.7k
10k
22k
DB167
DB168
DB301
DB169
DB170
DB302
AC354
AC292
47k
100k
220k
470k
1M
2.2M
4.7M
10M
VERTICAL MOUNT
AC293
DB153
DB293
DB154
DB155
DB294
DB156
DB157
DB295
47E
100E
220E
470E
1k
2.2k
4.7k
10k
22k
DB158
DB159
DB296
DB160
DB161
DB297
AC355
AC294
47k
100k
220k
470k
1M
2.2M
4.7M
10M
10MM CERMET SINGLE-TURN
TRIMMER POTENTIOMETER
HORIZONTAL MOUNT
Note: These are top adjust, single-turn trimmer potentiometers.
The 3 pins are arranged in a triangle.
Power Rating: 0.5 Watt
AB959
AB960
AB962
AB963
AB964
AB965
AB966
10E
20E
100E
200E
500E
1k
2k
AB967
AB968
AB969
AB970
AB971
AB972
5k
20k
100k
500k
1M
2M
VERTICAL MOUNT
Note: These are side adjust, single-turn trimmer potentiometers.
The 3 pins are arranged in a triangle.
AB973
AB974
AB975
AB976
AB978
AB979
AB980
AB981
10E
20E
50E
100E
200E
500E
1k
2k
AB982
AB983
AB984
AB985
AB986
AB987
AB998
5k
10k
50k
100k
200k
500k
2M
VERTICAL MOUNT
Note: These are side adjust, single-turn trimmer potentiometers.
The 3 pins are arranged in a line.
AB940
AB941
AB942
AB943
AB944
AB945
AB946
AB947
AB948
10E
20E
50E
100E
200E
500E
1k
2k
5k
AB949
AB950
AB951
AB952
AB953
AB954
AB955
AB957
10k
20k
50k
100k
200k
500k
1M
2M
VERTICAL MOUNT
(SPINDLE TYPE)
DB654
DB655
DB656
DB657
DB658
DB659
DB660
DB661
DB662
100E
220E
470E
1k
2.2k
4.7k
10k
22k
47k
DB663
DB664
DB665
DB666
GB166
GB959
AC301
AC302
100k
220k
470k
1M
1M Log.
2.2M
4.7M
10M
MULTI-TURN TOP ADJUST
TRIMMER (TY-SERIES)
HORIZONTAL MOUNT
(SPINDLE TYPE)
DB667
DB668
DB669
DB670
DB671
DB672
DB673
DB674
100E
220E
470E
1k
2.2k
4.7k
10k
22k
DB675
DB676
DB677
DB678
DB679
AC295
AC296
47k
100k
220k
470k
1M
2.5M
4.7M
VERTICAL MOUNT
(SPINDLE TYPE)
AC297
DB633
DB634
DB635
DB636
DB637
DB638
47E
100E
220E
470E
1k
2.5k
4.7k
DB639
DB640
DB641
DB642
DB643
DB644
DB645
10k
22k
47k
100k
220k
470k
1M
Note: These are top adjust, multiturn trimmer potentiometers. The
3 pins are arranged in a triangle.
Number of Screw Rotations:
electrical: 22 turns
mechanical: 25 turns
AB926
AB927
AB928
AB929
AB930
AB931
AB932
50E
100E
200E
500E
1k
2k
5k
AB933
AB934
AB935
AB936
AB937
AB938
AB939
10k
20k
50k
100k
200k
500k
1M
TRIMMER (TW-SERIES)
HORIZONTAL MOUNT
(SPINDLE TYPE)
DB618
DB619
DB620
DB621
DB622
DB623
DB624
DB625
100E
220E
470E
1k
2.2k
4.7k
10k
22k
DB626
DB627
DB628
DB629
DB630
AC298
AC299
AC300
07.42
47k
100k
220k
470k
1M
2.2M
4.7M
10M
Note: These are top adjust, multiturn trimmer potentiometers. The
3 pins are arranged in a line.
AB920
AB921
AB922
DB700
DB701
DB702
DB703
DB704
DB705
10E
20E
50E
100E
200E
500E
1k
2k
5k
DB706
DB707
DB708
DB709
DB710
DB711
AB923
AB924
AB925
10k
20k
50k
100k
200k
500k
1M
2M
5M
MULTI-TURN SIDE ADJUST
TRIMMER (TX-SERIES)
triangle.
AB904
AB905
AB906
AB907
AB908
AB909
AB910
AB911
10E
50E
100E
200E
500E
1k
2k
5k
AB912
AB913
AB914
AB915
AB916
AB917
AB918
AB919
10k
20k
50k
100k
200k
500k
1M
2M
PRESET POTENTIOMETER
ACCESSORIES
PLUG-IN SPINDLES FOR
PLUG-IN EDGE WHEEL FOR
GROUP
Note: This picture shows an edge
wheel that is plugged into a spindle type preset potentiometer.
Edge wheels are sold separately
from the preset potentiometers.
AB605 Edge Wheel 11.5mm diameter
for 10mm spindle type
preset potentiometers
AC305 Edge Wheel 16mm diameter
for 14mm spindle type
preset potentiometers
PANEL MOUNTABLE
ROTARY
POTENTIOMETERS
GROUP
Note: The picture on the left
shows a black, plastic spindle
that is plugged into a preset
potentiometer. The picture on the
right shows plug-in spindles that
Note: These are side adjust,
will only plug into spindle type
multi-turn trimmer potentiometers. The 3 pins are arranged in a preset potentiometers. Spindles
are sold separately from the preline.
set potentiometers.
FOR 10MM SPINDLE TYPE PRESET
AC303 Spindle for 10mm preset pot.
length 10.4mm x 3mm diameter
DB712
DB713
DB714
DB715
DB716
DB717
100E
200E
500E
1k
2k
5k
DB718
DB719
DB720
DB721
DB722
DB723
10k
20k
50k
100k
200k
500k
DB632 Spindle for 10mm preset pot.
length 10mm x 5mm diameter
POTENTIOMETERS 20pcs
AB628
A mixed pack that contains 20 potentiometers.
ORDER CODE: AB628
ROTARY POTENTIOMETERS
(LINEAR)
TRIMMER (CM-SERIES)
length 25.5mm x 4.9mm diameter
FOR 14MM SPINDLE TYPE PRESET
AB086 Spindle for 14mm preset pot.
length 9.5mm x 6mm diameter
DB631 Spindle for 14mm preset pot.
Note: Linear, carbon, single turn
potentiometers.
Grooved Spindle: 5.9mm diameter
GB224 500E
GB299 5k
GB296 10k
GB241 250k
(LINEAR WITH PLASTIC HOUSING)
Note: These are side adjust,
multi-turn trimmer potentiometers. The 3 pins are arranged in a
potentiometers.
07.43
Spindle Diameter: 6mm
AB782
HB165
HB257
HB166
HB167
JB062
470E
1k
2.2k
4.7k
10k
22k
HB168
HB169
AA784
HB170
HB171
potentiometers.
100E
220E
470E
1k
2.2k
4.7k
10k
22k
AC284
AC285
AC286
AC287
AC288
AC289
AC290
47k
100k
220k
470k
1M
2.2M
4.7M
AC018 2.2M
DUAL POTENTIOMETER
(LINEAR WITH SWITCH)
47k
100k
220k
470k
1M
(LINEAR)
AC276
AC277
AC278
AC279
AC280
AC281
AC282
AC283
EB408 10k
AB836
AB837
AB838
AB839
AB840
AB847 1k
AB848 2.2k
AB849 4.7k
Note: Log., carbon, single turn
potentiometers.
AB875
AB876
AB877
AB878
AB879
AB880
AB881
100E
220E
470E
1k
2k
4.7k
10k
AB882
AB883
AB884
AB885
AB886
AB887
22k
47k
100k
220k
470k
1M
DUAL POTENTIOMETER
(LINEAR)
Note: Two Linear, carbon, single
turn potentiometers in one package with 6 pins.
AC002
AC003
AC004
AC005
AC006
AC007
100E
220E
470E
1k
2.2k
4.7k
AC014
EB409
EB412
AC015
AC016
AC017
22k
47k
100k
220k
470k
1M
1k
2.2k
4.7k
10k
22k
AB841
AB842
AB843
AB844
AB845
47k
100k
220k
470k
1M
Note: Two Linear, carbon, single
DUAL POTENTIOMETER
turn potentiometers in one pack(LOGARITHMIC
WITH SWITCH)
age.
Each potentiometer has a singlepole switch.
Switch Rating: 0.3A max./ 250Vac
and 1A max. / 24Vdc
Note: Two Log, carbon, single
turn potentiometers in one packAC023 220E
AC027 22k
age.
AC024 470E
AC030 470k
Each potentiometer has a singleAC025 2.2k
AC031 1M
AC026 4.7k
pole switch.
Switch Rating: 0.3A max./ 250Vac
and 1A max. / 24Vdc
(LOGARITHMIC)
(LINEAR WITH SWITCH)
potentiometers that have a builtin single-pole switch.
Switch Rating: 0.3A max. /
250Vac
turn potentiometers in one package with 6 pins.
HB172
HB258
HB173
HB174
HB259
1k
2.2k
4.7k
10k
22k
AC019
HB176
AC020
HB177
HB178
AB851 470k
AB852 1M
AB853 2.2M
MULTI-TURN
(LINEAR LOW COST)
47k
100k
220k
470k
1M
(LOGARITHMIC WITH SWITCH)
Note: Low-cost, Linear, wirewound, 10-turn, multi-turn potentiometers.
Note: Log., carbon, single turn
potentiometers that have a builtin single-pole switch.
Switch Rating: 0.3A max. /
250Vac
AB827
AB828
AB829
AB830
AB831
1k
4.7k
10k
22k
47k
AB832
AB833
AB834
AB835
AB854
AB855
AB856
AB857
AB858
100E
200E
500E
1k
2k
AB859
AB860
AB861
AB862
5k
10k
20k
50k
MULTI-TURN
(PRECISION LINEAR)
100k
220k
470k
1M
DUAL POTENTIOMETER
(LOGARITHMIC)
Note: Highly Linear: (0.1%), wirewound, 10-turn, multi-turn potentiometers.
Note: Two Log, carbon, single
07.44
AB863
AB864
AB865
AB866
AB867
100E
500E
1k
2k
5k
AB868
AB869
AB870
AB871
10k
20k
50k
100k
Weight: 10g
ORDER CODE: AB873
ANALOGUE COUNTING DIAL
(15 TURNS)
ANALOGUE COUNTING
DIAL MECHANISMS
(PRECISION 20 TURNS)
This analogue counting dial enables one to
make fine adjustments to the rotational position of a potentiometer. It has a locking lever
that is used to prevent the adjusting knob
from accidentally turning.
This analogue counting dial must be connected to the spindle of a multi-turn rotary
potentiometer. It is recommended that this
dial is used together with one of the 0.1%
linear, 10-turn, multi-turn potentiometers.
Specifications:
Number of Knob Turns: 20
Number of Dial Divisions: 100 per turn
Readout Accuracy: 1/1000 over 10 turns
Housing Material: Hard Chrome Cast Metal
High Force Locking Lever
Dimensions:
Body Diameter: 46mm
Total Height: 24mm
Spindle Diameter: 6.35mm max.
Weight: 55g
ORDER CODE: AB872
(LOW COST 15 TURNS)
potentiometer.
Specifications:
Housing Material: Aluminium
Locking Lever
Dimensions:
Body Diameter: 22.8mm
Total Height: 25mm
Weight: 7g
ORDER CODE: AB874
POTENTIOMETER KNOBS
AND KNOB ACCESSORIES
BLACK WITH A WHITE LINE
AB177 Knob for spindle with 3mm diameter
AC033 Knob for spindle with 4mm diameter
HB306 Knob for spindle with 6mm diameter
GREY WITH A WHITE LINE
Note: These are standard potentiometer knobs that have a black
matt finish with a white dot and
narrow skirt. Each knob has a
tightening screw that enters radially from the side.
GB239 Knob for 6mm diameter grooved
spindle.
It does not have a tightening screw.
potentiometer.
Specifications:
Housing Material: Plastic
Locking Lever
Dimensions:
Total Height: 25mm
Note: These are collet potentiometer knobs. Each knob has a
brass insert (collet) that is tightened onto the potentiometer's
spindle. This is done by turning a
nut in a clock wise direction
when looking at the top of the
knob. The nut and collet are hidden underneath a removable cap.
These knobs come in black or
grey colour with a white line.
POTENTIOMETER KNOBS
WITH NUT
(SEDER TYPE)
Note: These are seder type
potentiometer knobs. Each knob
has a brass insert (collet) that
can be tightened onto the poten-
07.45
tiometer's spindle. This is done
caps can also have printed symcome in black or grey colour.
by turning a nut in a clock wise
bols like a dot, line, arrow or triBLACK
direction when looking at the top
angle.
of the knob. The nut and collet
BLUE CAPS
10mm diameter x 14.5mm height
are hidden underneath a removFOR 10MM DIAMETER KNOBS
able cap. These knobs come in
AC064 Knob for spindle with 4mm diameter AC070 Cap that is plain without a symbol
black or grey colour.
BLACK
AC071 Cap with a white dot
AC072 Cap with a white arrow
AC066 Knob for spindle with 6mm diameter AC073 Cap with a white line
FOR 15MM DIAMETER KNOBS
AC097
AC098
AC099
GREY
AC100
AC102
AC050 Knob for spindle with 6.35mm dia.
AC059 Knob for spindle with 4mm diameter AC101
Cap
Cap
Cap
Cap
Cap
Cap
that is plain without a symbol
with a white dot
with a white triangle
with a white arrow
with a white line
with a white clockwise arrow
AC052 Knob for spindle with 4mm diameter AC061 Knob for spindle with 3mm diameter AC131 Cap
AC132 Cap
AC133 Cap
AC054 Knob for spindle with 6mm diameter AC063 Knob for spindle with 4mm diameter AC134 Cap
AC135 Cap
with a white dot
with a white arrow
with a white line
with a black line
AC056 Knob for spindle with 6mm diameter AC065 Knob for spindle with 6mm diameter
AC158
Cap that is plain without a symbol
AC160 Cap with a white line
AC058 Knob for spindle with 6mm diameter AC068 Knob for spindle with 6.35mm dia.
GREY
BLACK WITH A WHITE LINE
AC177 Cap that is plain without a symbol
AC045 Knob for spindle with 4mm diameter AC067 Knob for spindle with 6mm diameter
GREY WITH A WHITE LINE
GREY CAPS
CAPS FOR SEDER TYPE
AC075 Cap with a white triangle
POTENTIOMETER KNOBS
AC079 Cap with a black line
AC076 Cap with a white counter-clockwise
arrow
AC103
AC104
AC105
AC106
AC107
AC108
POTENTIOMETER KNOBS
WITH SCREW
(SEDER TYPE)
Cap
Cap
Cap
Cap
Cap
Cap
with a white dot
with a white arrow
with a white line
with a black arrow
AC136
AC137
AC138
AC139
Cap
Cap
Cap
Cap
with a white arrow
with a white line
with a black clockwise arrow
AC161
AC162
AC163
AC164
Note: These are seder type
potentiometer knobs. Each knob
has a brass insert (collet) that
can be tightened onto the potentiometer's spindle. This is done
by turning a screw in a clock
wise direction when looking at
the top of the knob. The screw
and collet are hidden underneath
a removable cap. These knobs
Cap
Cap
Cap
Cap
with a white arrow
with a white line
with a black arrow
Note: These are stylish caps that
fit on top of the seder type potentiometer knobs. The caps are
round and come in different
colours and diameters. These
07.46
YELLOW CAPS
AC081 Cap with a white triangle
AC109
AC110
AC111
AC112
AC113
AC114
Cap
Cap
Cap
Cap
Cap
Cap
with a white dot
with a white arrow
with a white line
with a black line
AC140
AC141
AC142
AC143
AC144
Cap
Cap
Cap
Cap
Cap
with a white dot
with a white arrow
with a white line
BLACK CAPS
AC085
AC086
AC087
AC088
Cap
Cap
Cap
Cap
with a white arrow
with a white line
AC115
AC116
AC117
AC118
AC119
Cap
Cap
Cap
Cap
Cap
with a white dot
with a white arrow
with a white line
AC145
AC146
AC147
AC149
AC148
Cap
Cap
Cap
Cap
Cap
with a white arrow
with a white line
with a white clockwise arrow
AC150
AC151
AC152
AC153
AC154
Cap
Cap
Cap
Cap
Cap
with a white dot
with a white arrow
with a white line
with a black line
GREEN CAPS
AC093
AC094
AC095
AC096
Cap
Cap
Cap
Cap
with a white arrow
with a white line
AC207 Blue
AC208 Grey
AC209 Yellow
AC210 Black
AC211 Red
AC212 Green
AC213 Blue
AC214 Grey
AC215 Yellow
AC216 Black
AC217 Red
AC218 Green
AC219 Blue
AC220 Grey
AC221 Yellow
AC222 Black
AC223 Red
AC224 Green
AC225 Black
AC226 Red
AC227 Yellow
AC228 Red
INDICATOR SKIRTS
FOR SEDER TYPE
POTENTIOMETER KNOBS
AC126
AC127
AC128
AC129
AC130
Cap
Cap
Cap
Cap
Cap
with a white arrow
with a white line
with a black arrow
POINTERS FOR SEDER TYPE
POTENTIOMETER KNOBS
Note: These are indicator skirts
that are fixed underneath the
seder type potentiometer knobs.
The skirt extends outwards from
underneath the knob. It is used
to indicate the knob’s angle of
rotation.
AC229 Skirt is grey with a white line
outer diameter of skirting is 22mm
AC230 Skirt is black with a white line
AC231 Skirt is grey with a black triangle
AC232 Skirt is grey with a white line
AC233 Skirt is black with a white line
NUMBERED SKIRTS
RED CAPS
AC089
AC090
AC091
AC092
Cap
Cap
Cap
Cap
with a white arrow
with a white line
AC120
AC121
AC122
AC123
AC124
AC125
Cap
Cap
Cap
Cap
Cap
Cap
with a white dot
with a white arrow
with a white line
with a black arrow
FOR SEDER TYPE
Note: These are pointers that are
POTENTIOMETER KNOBS
fixed underneath the seder type
potentiometer knobs. It is used
to indicate the knob’s angle of
rotation. The pointers are round
and come in different colours
and diameters.
Note: These are numbered, transparent indicator skirts that are
AC201 Blue
AC204 Black
fixed underneath the seder type
AC202 Grey
AC205 Red
potentiometer knobs. The skirt
AC203 Yellow
AC206 Green
extends outwards from underneath the knob. Each number
07.47
can be used to indicate a specific
angle of knob rotation.
AC234 Skirt has black numbers: 0 - 11
AC236 Skirt has white numbers: 1 - 12
AD062
AC554
DB220
GB277
AA474
DB221
DB222
AB257
GB671
GB501
AC523
AA627
DB223
EB127
DB224
AA755
AA054
AB348
AC524
AC525
EB905
AC526
3.2768 MHz
3.6864 MHz
4.0 MHz
4.096 MHz
4.433619 MHz
6.0 MHz
8.0 MHz
8.8672 MHz
9.8304 MHz
10 MHz
11 MHz
11.0592 MHz
12.0 MHz
12.288 MHz
16.0 MHz
20.0 MHz
24.0 MHz
24.576 MHz
27.0 MHz
30.0 MHz
32.0 MHz
48.0 MHz
CRYSTAL OSCILLATOR
MODULES
AC534
AB515
AC531
AC532
AB516
AB517
AC533
AB518
8 MHz
10 MHz
12 MHz
16 MHz
20 MHz
30 MHz
32 MHz
40 MHz
CERAMIC RESONATORS
AA378
GB463
AD169
GB477
AD170
455kHz (CSB455E) 2 pins
455kHz (ZTB455E) 2 pins
4MHz 2 pins
4.19MHz 3 pins
16MHz 3 pins
SEMICONDUCTORS
QUARTZ CRYSTALS
INTEGRATED CIRCUITS
INTEGRATED CIRCUITS 20PCS
Note: General purpose quartz
crystals. Suited for microprocessor oscillators, frequency synthesizers and more.
Tolerance at 25°C: 30ppm
Frequency Drift (-10 to +60°C):
30ppm
Load Capacitance: 30pF
Pin spacing: 4.9mm
Width x Thickness: 10x3.5mm
Height:
Low Profile: 3.3mm
Standard Size: 13mm
AA053 32.768 kHz
FB460 40.0 kHz
LOW PROFILE
AD219
AD222
AC919
AD223
AD220
AC920
AC921
DB405
AD221
AC922
3.5795 MHz Low Profile
4.0 MHz Low Profile
6.0 MHz Low Profile
8.0 MHz Low Profile
STANDARD SIZE
AD005 1.0 MHz
GB186 3.5795 MHz
Note: These are 5Vdc Crystal
Oscillators with a single signal
output. The output signal has a
frequency as indicated on the
hermetically sealed metal casing.
The connection pins are spaced
to fit into a 14-pin DIP IC socket.
Pin Numbers:
1: No Connection
7: GND (negative supply rail 0V)
8: Oscillator Signal Output
14: Vcc (positive supply rail
5Vdc)
Supply Voltage: 5Vdc ± 10%
Output signal rise/fall time / supply current:
1 - 8MHz: 15ns max. / 10mA
9 - 30MHz: 10ns max. / 10 50mA
32 - 66MHz: 5ns max. / 50mA
Operating Temperature: 0°C to
+70°C
Frequency Drift: 0°C to +70°C
±100ppm
Frequency stability: ±0.01% at
25°C
AC530 1 MHz
AB514 4 MHz
07.48
AB627
A mixed pack that contains 20 integrated circuits and a data pamphlet.
ORDER CODE: AB627
4000 CMOS LOGIC IC’S
JB067
4000B
HB124
4001B
JB068
4001UB
JB069
4002B
JB071
4007B
AA254
4008B
AA052
4009UB
AC505
4010B
HB125
4011B
GB228
MC14011
2 CMOS 3-input NOR
gate (DIP14)
4 CMOS 2 input NOR
gate (DIP14)
4 CMOS 2-input NOR
gate (DIP14)
2 CMOS 4-input NOR
gate (DIP14)
2 CMOS complementary
pair (DIP14)
CMOS 4-bit binary full
adder (DIP16)
Hex Buffers Inverting
(DIP16)
Hex Non-inverting Buffers
(DIP16)
4 CMOS 2-input NAND
gate (DIP14)
Quad 2-Input NAND
JB073
4012B
HB126
4013B
JB074
4014B
JB075
4015B
JB076
4016B
HB127
4017B
GB222
MC14017
JB077
4018B
JB078
4019B
HB128
4020B
HB129
4021B
JB079
4022B
JB080
4023B
HB130
4024B
JB081
4025B
HB131
4026B
JB082
4027B
JB083
4028B
JB084
4029B
JB085
4030B
AC516
4031B
AC517
4033B
JB086
4035B
HB132
4040B
JB087
4041B
JB088
4042B
HB133
4043B
JB089
4044B
HB134
4046B
HB135
4047B
HB136
4049B
JB090
4050B
JB091
4051B
JB092
4052B
JB093
4053B
AC518
4055B
AC519
4056B
HB137
4060B
HB138
4066B
JB094
4068B
JB095
4069B
JB096
4070B
JB097
4071B
JB098
4072B
JB099
4073B
Gate (DIP14)
2 CMOS 4-input NAND
gate (DIP14)
2 CMOS D-type flipflops (DIP14)
CMOS 8-bit static shift
(DIP16)
2 CMOS 4-bit static
shift (DIP16)
4 CMOS bilateral
switches (DIP14)
CMOS 5-stage
Johnson count (DIP16)
Decade Counter/Divide
(DIP16)
CMOS preset divide-by-n
(DIP16)
4 CMOS 2-input multi
plexer (DIP16)
CMOS 14-stage binary
count (DIP16)
CMOS 8-bit static shift
(DIP16)
CMOS 4-stage divide-by-8
(DIP 16)
3 CMOS 3-input NAND
gate (DIP14)
CMOS 7-stage binary
count (DIP14)
3 CMOS 3-input NOR
gate (DIP14)
7-Seg. display driver decade
counter/divider (DIP16)
2 CMOS JK flip-flop
(DIP16)
CMOS 1-of-10 decoder
(DIP16)
CMOS synchronous
up/down (DIP16)
4 CMOS Exclusive-OR
gate (DIP14)
64-stage static shift register
(DIP16)
7-Seg. display driver decade
counter/divider (DIP16)
CMOS 4-bit universal
shift (DIP16
CMOS 12stage binary
ount (DIP16)
4 CMOS true/comple
ment buf (DIP14)
4 CMOS D-latch
(DIP16)
4 CMOS R/S latch 3state (DIP16)
4 CMOS R/S latch 3stage (DIP16)
CMOS phase-locked
loop (DIP16)
CMOS mono/astable
multivib (DIP14)
CMOS hex inverting
buffers (DIP16)
CMOS hex non-inverting
buf (DIP16)
CMOS 8-channel analogue
(DIP16)
2 CMOS 4-channel
analogue (DIP16)
3 CMOS 2-channel
analogue (DIP16)
BCD to 7-seg. decoder LCD
driver (DIP16)
BCD to 7-seg. decoder LCD
driver + input latch (DIP16)
CMOS 14-stage ripplecarry (DIP16)
4 CMOS bilateral
switches (DIP14)
CMOS 8-input NAND
gate (DIP14)
CMOS hex inverter
(DIP14)
4 CMOS EXCLUSIVE-OR
gate (DIP14)
4 CMOS 2-input OR
gate (DIP14)
2 CMOS 4-input OR
gate (DIP14)
3 CMOS 3-input AND
gate (DIP14)
JB100
4075B
JB101
4076B
JB102
4077B
JB103
4078B
HB139
4081B
JB104
4082B
AC520
HB140
4089B
4093B
JB106
4094B
AC521
4098B
AA499
4099B
HB141
4104B
EB688
4503B
JB108
4510B
HB142
4511B
JB109
4512B
EB689
4514B
AC522
4515B
JB110
4516B
JB111
4518B
JB112
4519B
JB113
4520B
JB114
4521B
JB115
4522B
JB116
4528B
JB118
4532B
EB690
4536B
JB119
4538B
JB120
4539B
HB143
4541B
JB121
4543B
GB213
MC14553
JB122
4555B
JB123
4556B
EB692
4585B
AC506
40102B
AA765
40103B
EB691
40106B
AC507
40107B
AC508
40109B
EB822
40110B
AC509
40161B
AC510
40162B
AC511
AC512
AC513
40174B
40175B
40192B
AC514
40193B
3 CMOS 3-input OR
gate (DIP14)
4 CMOS D-type register
(DIP16)
4 CMOS EXCLUSIVENOR gate (DIP14)
CMOS 8-input NOR
gate (DIP14)
4 CMOS 2-input AND
gate (DIP14)
2 CMOS 4-input AND
gate (DIP14)
binary rate multiplier (DIP16)
4 CMOS 2-input NAND
Schmit (DIP14)
CMOS 8-stage shift-anstore(DIP16)
Dual Monostable
Multivibrator (DIP16)
8-Bit Addressable
Latches (DIP16)
4 CMOS low to high
voltage (DIP16)
Hex Buffer 3 State
(DIP16)
CMOS BCD up/down
ounter (DIP16)
CMOS BCD - 7-segment
latch/Decoder/Driver(DIP16)
CMOS 8-input multiplexer
(DIP16)
4-bit latch / 4-to-16 decoder
set output is high (DIP24)
4-bit latch / 4-to-16 decoder
set output is low (DIP24)
CMOS binary up/down
counter (DIP16)
2 CMOS BCD counter
(DIP16)
plexer (DIP16)
2 CMOS binary counter
(DIP16)
CMOS 24-stage frequency
(DIP16)
CMOS program 4-bit BCD
(DIP16)
2 CMOS mono multi
vibrator (DIP16)
CMOS 8-input priority
(DIP16)
Programmable timer
(DIP16)
2 CMOS precision mono
stable (DIP16)
plexer (DIP16)
CMOS programmable
timer (DIP 14)
CMOS BCD to 7-seg. latch
(DIP16)
3-Digit BCD Counter
(DIP16)
2 CMOS 1-of-4 decoder
(DIP16)
2 CMOS 1-of-4 decoder
(DIP16)
4 B Magnitude comparator
(DIP16)
8-stage presettable 2-DEC
BCD down counter (DIP16)
Presettable 8-Bit Binary
Down Counter (DIP16)
4584B Hex shmitt trigger
(DIP14)
Dual 2-input NAND driver
open-drain outputs (DIP8)
Quad low-to-high Voltage
Level Shifter (DIP16)
decade up down counter
(DIP16)
Binary 4-bit Counter asynchronous clear (DIP16)
Decade 4-bit Counter synchronous clear (DIP16)
6 D-type flip-flops (DIP16)
4 D-type flip-flops (DIP16)
Presettable BCD up/down
Counter (DIP16)
Presettable Binary up/down
Counter (DIP16)
07.49
AC515
40194B
EB670
74HC00
Bidirectional 4-bit universal
shift register (DIP16)
7400 LOGIC IC’S
HB144
EB647
EB671
HB145
EB648
EB672
HB288
EB649
EB861
AA571
EB646
AA572
AA552
EB673
HB289
EB650
DB735
JB148
AA488
JB149
AA550
EB678
HB146
EB655
JB150
JB151
JB152
JB153
EB682
HB290
EB658
AA573
AA574
JB154
EB686
HB147
JB155
AA012
HB291
EB687
HB292
DB734
JB157
JB158
AC883
AA575
Gate Quad 2 Input NAND
(DIP14)
74HCT00 CMOS 4 2-input NAND
gate (DIP14)
74LS00
Quad 2 Input NAND
gate (DIP14)
74HC02
Gate quad 2 input NOR
(DIP14)
74HCT02 CMOS 4 2-input NOR gate
(DIP14)
74LS02
Gate Quad 2 input NOR
(DIP14)
74HC04
6 Inverter/Not gates (DIP14)
74HCT04 CMOS hex (6) inverter / Not
gates (DIP14)
74LS04
6 Inverter / Not gate (DIP14)
74HC05
6 Inverters / Not gates
Open Drain (DIP14)
74LS05
6 Inverter / Not gates
Open Collector (DIP14)
7406
6 Inverting / Not gate buffer
74LS06
6 Inverting/ Not gate buffer
7407
Hex (6) buffers with open
collector output (DIP14)
74HC08
Gate quad 2 input and
(DIP14)
74HCT08 quad 2-input AND gate
(DIP14)
74LS08
Gate Quad 2 Input and
(DIP14)
74LS09
Quad 2 Input AND Gate
with O/C (DIP14)
74HCT10 triple 3-input NAND gate
(DIP14)
74LS10
Triple 3-Input NAND Gates
(DIP14)
74HCT11 triple 3-input AND gate
(DIP14)
74C14
40106B 6 Inverting / Not
gate Schmitt trigger (DIP14)
74HC14
Hex schmitt trigger (DIP14)
74HCT14 CMOS 6 inverting / Not gate
Schmit Trigger (DIP14)
74LS14
6 Schmitt Trigger Not gates
(DIP14)
74HCT20 dual 4-input NAND gate
(DIP14)
74HCT21 dual 4-input AND gate
(DIP14)
74HCT27 triple 3-input NOR gate
(DIP14)
74HCT30 8-input NAND gate
(DIP14)
74HC32
quad 2-input OR Gate
(DIP14)
74HCT32 quad 2-input OR Gate
(DIP14)
74LS32
Gate quad 2 input or
(DIP14)
74LS42
BCD to Decimal Decoder
(DIP16)
74LS47
BCD-7seg. decoder/driver
(DIP16)
74HCT73 dual JK with reset (DIP14)
74HC74
Dual D type Flip-Flop
(DIP14)
74HCT74 CMOS 2 D-type flip flop
(DIP14)
74HCT75 quad bistable (DIP16)
74LS76
dual JK with set and reset
neg.-edge trigger (DIP16)
74HCT85 Magnitude comparator 4bit
(DIP16)
74HC86
Gate Quad 2 Input EXOR
gate (DIP14)
74HCT86 quad 2-input EXCL.-OR
gate (DIP14)
74LS90
Decade counter Divide by
2 and 5 (DIP14)
74HCT107 dual JK with reset (DIP14)
74HCT109 dual JK with set and reset
pos.-edge trigger (DIP16)
74HC112
dual JK with set and reset
neg.-edge trigger (DIP16)
74LS122
Retriggerable Resettable
EB674
74HC123
EB651
74LS123
EB675
74HC125
JB160
74HCT125
JB161
74HCT126
EB676
74HC132
JB162
74HCT132
AD249
74HC133
EB677
74HC138
HB148
74HCT138
EB653
74LS138
JB164
74HCT139
EB654
74LS139
HB294
74HCT151
JB165
74HCT153
FB459
74HC154
GB334
74HC157
JB166
74HCT157
JB167
74HCT161
JB168
74HCT163
HB149
74HCT164
GB551
74HC164
JB169
JB170
JB171
74HCT165
74HCT174
74HCT175
AA521
74LS190
JB173
74HC191
AA630
74HC194
AC909
74LS194
JB175
74HCT195
JB176
74HCT221
GB741
JB177
JB178
74HC238
74HCT238
74HCT240
JB179
74HCT241
JB180
74HCT244
EB656
GB418
74LS244
74HC245
JB181
74HCT245
EB657
74LS245
JB183
74HCT257
GB209
74HC259
JB185
74HCT259
EB681
74HC273
JB186
74HCT273
HB296
74LS283
JB187
74HCT299
EB683
74HC373
Multivibrator (DIP14)
Dual mono. multivibrator
(DIP16)
Monostable Multivibrator
(DIP16)
Gate quad buffer TS
(DIP14)
quad buffer/line driver
(DIP14)
quad buffer/line driver
(DIP14)
Quad 2 Inp Schmit trigger
(DIP14)
quad 2-input NAND
(DIP14)
13-input NAND gate
(DIP16)
3 to 8 Line decoder
(DIP16)
CMOS 3-8 line decoder
(DIP16)
3 to 8 Line Decoder
(DIP16)
dual 2-to-4 line decode
(DIP16)
Decoder / Demultiplexer
(DIP16)
octal-input multiplexer
(DIP16)
dual 4-input multiplex
(DIP16)
CMOS 4 to 16 Line
Decoder (DIP24w)
quad 2-input multiplex
(DIP16)
(DIP16)
4-bit binary counter
(DIP16)
(DIP16)
CMOS 8-bit serial-in
(DIP14)
CMOS 8-bit serial-in
(DIP14)
8-bit shift register (DIP16)
hex D-type flip-flop (DIP16)
quad D-type flip-flop
(DIP16)
Up/Down Decade Counter
Ripple Clock (DIP16)
(DIP16)
Bidirectional 4-Bit Universal
Shift Register (DIP16)
Bidirectional 4-Bit Universal
Shift Register (DIP16)
4-bit parallel register
(DIP16)
dual non-retrig. mono
(DIP16)
3-to-8 line decoder (DIP16)
3-to-8 line decoder (DIP16)
octal buffer/line drive
(DIP20)
(DIP20)
(DIP20)
Octal Bus Drivers (DIP20)
Octal bus transceiver
(DIP20)
octal bus transreceiver
(DIP20)
Octal bus transceiver
(DIP20)
(DIP16)
8-bit addressable latch
(DIP16)
8-bit addressable latch
(DIP16)
Octal D Type Flip-Flop
(DIP20)
octal D-type flip-flop
(DIP20)
binary full adder 4-bit
(DIP16)
8-bit univer. register
(DIP20)
Octal D type Flip-Flop
JB190
EB659
JB191
JB192
JB193
AB958
JB194
JB195
HB150
JB196
EB684
JB197
EB685
JB198
GB580
JB200
HB263
HB264
(DIP20)
74HCT373 octal D-type latch (DIP20)
74LS373
D-type latch (DIP20)
74HCT374 octal D-type flip-flop
(DIP20)
(DIP20)
74HCT390 dual decade rip. counter
(DIP16)
74HC393 dual 4-bit binary counter
(DIP14)
74HCT393 dual 4-bit binary counter
(DIP14)
74HCT540 octal buffer/line driver
(DIP20)
74HC541 CMOS 8 buffer/line driver
(DIP20)
74HCT541 octal buffer/line driver
(DIP20)
74HC573 Octal D-Type Latch TS
(DIP20)
74HCT573 octal D-type latch (DIP20)
74HC574 Octal D type flip-flop TS
(DIP20)
(DIP20)
74HC595 8-bit shift register (DIP16)
74HCT688 magnitude comp. 8-bit
(DIP20)
74C922
Keyboard Encoder (DIP18)
74C923
Keyboard Encoder /
Decoder (DIP20)
AUDIO AMPLIFIERS
GB664
GB313
A205K
BA5406
GB171
LM1875T
HB091
HB210
FB427
FB426
EB742
LM380N
LM386N-1
LM386N-3
LM386N-4
TBA810S
HB094
AA287
FB465
TBA820M
TDA1514A
TDA1521A
AA587
HB092
TDA1558Q
TDA2002
DB740
TDA2003
EB407
TDA2004
AA641
TDA2005
HB093
TDA2006
GB309
TDA2009A
AA580
TDA2030
EB265
TDA2040
EB585
TDA2611A
EB896
TDA2822M
EB843
TDA7052
GB351
TDA7053A
AA286
TDA7294
AC889
AD694JN
EB663
26LS31
EB668
75176AP
EB733
L298N
for Kemo FB579
Dual 3-W Audio Power
Amplifier (SIL12)
Audio Power Amp 20W
(5pin TO220)
Audio amp 2.5W (DIP14)
Audio Power Amp (DIP8)
LINEAR AUDIO AMP
5-10W (DIP12)
KA2201 Audio amp (DIP8)
Audio amp 50W
Stereo audio amplifier IC
2x6W at ±12V (9 pin)
Amplifier Audio 4x11W
(LM383) Audio amp 11W
(5pin TO220)
Audio amp 10W Supply 8 to
18V (5p TO220)
10+10 W Stereo Amplifier
(11 pin)
car radio bridge amplifier
20W 14V (11 pin)
Audio amp 8W ±12V
(5pin TO220)
10W + 10W Audio
Amplifier (11 pin)
Hi-Fi amplifier 14W
±6 to ±22V (5p TO220)
hi-fi audio power amplifier
20W (5 pin)
5 W audio power amplifier
(SIL9)
dual low-volt amplifier
(DIP8)
Mono audio amp. 1W BTL
(DIP8)
1W Stereo Audio Amp.
DC vol. adj. (DIP16)
Audio amp 100W Supply
±10 to ±40V
EB704
JB215
EB351
AC944
GB198
DB646
DB647
DB648
DB650
DB651
DB652
HB098
LM3914N
HB099
LM3915N
07.50
+5V RS232 driver/receiver
(DIP20)
MC1489P SN75189N
RS232C
Line Receiver (DIP14)
TDA1085C Universal Motor Speed
Controller
TC4426A Dual high-speed MOSFET
driver 1.5A (SMD SOIC8)
UCN5804B Unipolar Stepper Motor
Translator / Driver (DIP16)
ULN2001AN Darlington Array 0.5A
(DIP16)
(DIP16)
(DIP16)
ULN2068B Driver Switch 1.5A 35V
(DIP16)
ULN2803AN Darlington Array (DIP18)
ULN2804AN Darlington Array (DIP18)
MEMORY ICS
GB581
HB160
GB174
FB468
AC910
FB467
FB466
AD263
HB164
AC564
EB697
EB695
AA352
AA960
AT24C01A Serial EEPROM 1024-bit
(DIP8)
AT93C46
Serial EEPROM 1024-bit
(DIP8)
93LC46A/P Serial EEPROM 1024-bit
(DIP8)
AT24C02
I²C Serial EEPROM 2K-bit
(DIP8)
CAT24C02J I²C Serial EEPROM 2K-bit
(SMD SOIC8)
24LC32A-/P I²C Serial EEPROM 32K
(DIP8)
24LC64-/P I²C CMOS Serial EEPROM
64K (DIP8)
24LC256-I/P I²C CMOS Serial EEPROM
256K (DIP8)
6264
CMOS Static RAM 8Kx8
Winbond W2465-70LL
100ns (DIP28)
62256
70ns (DIP28)
62C1024
70ns (DIP32)
M27C128 CMOS UV EPROM 16Kx8
200ns (DIP28)
M27C256 CMOS UV EPROM
32K x 8 150ns (DIP28)
M27C512 CMOS UV EPROM
64K x 8 150ns (DIP28)
MICROCONTROLLER 51 FAMILY
HB157
EB698
HB155
HB156
AA519
HB151
80C31
Microcontroller 8-bit
(DIP40)
80C32
MCU 256x8 RAM (DIP40)
AT89C1051-24PC
Micro 8-bit
1K flash (DIP20)
AT89C2051-24PC
Micro 8-bit
2K flash (DIP20)
AT89C4051-24PC
Micro 8-bit
4K flash (DIP20)
AT89C51-20PC
Micro 8-bit
4K flash (DIP40w)
PIC MICROCONTROLLER FAMILY
EB811
PIC12C509A-04/P
MCU 4MHz,
1K OTP, 41B RAM, 6 I/O,
1x8bit TMR (DIP8)
AB444
PIC12F509-I/P
MCU 4MHz,
1K FLASH, 41B RAM, 6 I/O,
1x8bit TMR (DIP8)
AB445
PIC12F629-I/P
MCU 20MHz,
1K FLASH, 128B EEPROM,
64B RAM, 6 I/O, 1 Comp,
1x8bit 1x16bit TMR (DIP8)
AB446
PIC12F675-I/P
MCU 20MHz,
4 Ch. multiplex to 10bit A/D,
AC845
PIC12F683-I/P
MCU 20MHz,
Captur/Compare/10bit PWM,
DRIVERS
4-20mA Current Transmitter
Input: 0-2V / 0-10V (DIP16)
Line driver RS422 TS
(DIP16)
BI-Direct BUS Transceiver
(DIP8)
Dual full-bridge driver
46Vmax. 2A per channel
(15 pin MULTIWATT)
LED driver linear steps
(DIP18)
LED driver logarithmic
(DIP18)
MAX233
EB977 AN7117
NF-E, 9V, 2A, 0,65W
(SIP9)
Programmable I/O port
EB743 TDA1170
Linear Vertical Deflect
(DIP40w)
(DIP12)
ADC0804LCN 8-bit A to D converter
parallel output bus (DIP20)
REGULATORS FIXED VOLTAGE
ADC0809CCN 8-bit A to D converter
8 Ch. multiplex to 8-bit A/D
parallel output bus (DIP28w)
MCP3201-B 12-Bit A to D converter
SPI serial interface (DIP8)
DAC0800LCN 8-bit D to A converter
V-supply: 5/-12V (DIP16)
MAX232
ICL232 dual
transmitter/receiver (DIP16)
MAX3232CP dual RS-232 Transceivers
Low-Power (DIP16)
MAX691
Micro Bat SW/OVR
Watchdog (DIP16)
MICROPROCESSOR PERIPHERALS
JB130
PIC16C54C-04/P
MCU 4MHz,
HB161
0.5K OTP, 25B RAM, 12 I/O,
1x8bit TMR (DIP18)
DB730
DB732
PIC16C57C-04/SP
MCU 4MHz,
1x8bit TMR (narrow DIP28)
DB731
PIC16C57C-04/P
MCU 4MHz,
1x8bit TMR (wide DIP28)
AB447
FB424
FB425
AB376
AA430
FB342
GB496
AA895
EB572
AD262
EB348
AA048
PIC16F57-I/P
MCU 20MHz,
2k FLASH, 72B RAM, 20 I/O EB263
1x8bit TMR (wide DIP28)
PIC16F627A-I/P
MCU 20MHz,
1 x 10bit PWM, USART,
PIC16F628A-I/P
MCU 20MHz,
1 x 10bit PWM, USART,
PIC16F630-I/P
MCU 20MHz,
PIC16C711-04/P
MCU 4MHz,
1x8bit TMR (DIP18)
PIC16F84A-20/P
MCU 20MHz,
68B RAM, 13 I/O,
1x8bit TMR (DIP18)
PIC16F876A-I/SP
MCU 20MHz,
2 x 10bit PWM,
USART, I2C / SPI
2x8bit 1x16bit TMR
(narrow DIP28)
PIC16F877-20/P
MCU 20MHz,
2 x Captur/Compare/PWM,
USART, I2C / SPI, PSP,
2x8bit 1x16bit TMR
(wide DIP40)
EB706
OPERATIONAL AMPLIFIERS
EB720
HB083
EB726
EB727
HB090
HB089
AC501
EB823
DB738
HB086
HB087
DB746
EB899
EB900
AC503
EB710
EB711
HB085
DB739
HB084
DB653
EB298
EB901
HB088
HB261
EB740
EB741
EB744
AC846
AC847
PIC18F1320-I/P
MCU 40MHz,
4K FLASH, 256B RAM,
256B EEPROM, 16 I/O,
8bitx8bit hardware Multiplier,
Enhanced USART,
Enh. Captur/Compare/PWM,
AA186
AA070
AA187
3403PC
Quad Op-amp 3-36V
(DIP14)
LM741CN Op-amp General Purpose
(DIP8)
LM741CH Op-amp General Purpose
round metal package (TO5)
747N-14
Dual Op-amp (DIP14)
CA3130E op-amp MOSFET in
CMOS out (DIP8)
CA3140E op-amp MOSFET in BJT
out (DIP8)
CA3160E op-amp MOSFET in CMOS
out (DIP8)
ICL7611DCPA
Op-amp (DIP8)
LF347
wide band quad JFET opamp (DIP14)
LF351N
op-amp J-FET input (DIP8)
LF353N
dual op-amps J-FET input
(DIP8)
LF356
wide band JFET op-amp
(DIP8)
LF411CN op-amp
LF412CN op-amp
LM224N
quad low power op-amps
(DIP14)
LM301AN Op-amp General Purpose
(DIP8)
LM308N
Precision Op-amp (DIP8)
LM324N
quad op-amps (DIP14)
LM348
quad 741 op-amp (DIP14)
LM358N
dual op-amps (DIP8)
LM3900
Quad Op-Amp (DIP14)
MC1458N dual op-amp general pur
pose (DIP8)
MC33171P Low Power Single Supply
Op-Amp (DIP8)
NE5532N dual op-amp (DIP8)
NE5534AN low noise op-amp (DIP8)
OP07CP
Op-amp Low Offset (DIP8)
RC4558
Low Noise Wide Band
LM741 (DIP8)
TL061CP Single Op-amp Low Power
JFET (DIP8)
TL062CP Dual Op-amp Low Power
JFET (DIP8)
TL071CN J-FET single op-amp
(DIP8)
TL072CN dual JFET op-amp (DIP8)
TL074CN J-FET quad op-amp
(DIP14)
TL081CN JFET op-amp (DIP8)
TL082CN dual JFET op-amp (DIP8)
TL084CN quad JFET op-amp
(DIP14)
TLC27L2CP CMOS Dual Precision Opamp (DIP8)
TLC27L4CN CMOS Quad Precision
Op-amp (DIP14)
PIC18F2550-I/SP
MCU 48MHz,
16K FLASH, 2048B RAM,
256B EEPROM, 24 I/O,
8bitx8bit hardware Multiplier, EB748
10Ch. multiplex to 10bit A/D,
EB749
2 Comparators,
USB V2.0 Compliant,
Enhanced USART, I2C, SPI,
PROGRAMMABLE LOGIC DEVICES
2 x Captur/Compare/PWM,
(PLD)
1x8bit 3x16bit TMR
(narrow DIP28)
EB701 GAL20V8 Eraseable PAL (DIP24)
MC68HC705P6ACP (DIP28)
MC68HC908JB8JP (DIP20)
MICROCONTROLLERS
PREPROGRAMMED
GB574
EB745
AA066
AA067
AA068
OTHER MICROCONTROLLERS
AB256
AB180
82C55A
Kemo 513D
RADIO / TV SPECIAL FUNCTIONS
EB941
EB942
EB955
AN1555
AN1741
AN5135
EB970
AN6652
EB971
AN6880
for FB644
Timer (DIP8)
Uni, Serie 741, 18V (DIP8)
TV, Video+Ton, AGC, AFC
SDIP28
Motor Speed Control
(TO126/4)
Servo-Motor Control (SIP7)
07.51
AC923
MCP1700 - 2.5V
Vo = +2.5V ± 2%
Vi = +2.8V to +6.0V
Max. Io = 250mA
Max. Power = 369.6mW
Io = 0 to 103mA at Vi = 6.0V
Io = 0 to 250mA at Vi = 3.9V
(SMD 3pin SOT23A)
AC924
MCP1700 - 3.0V
Vo = +3.0V ± 2%
Vi = +3.29V to +6.0V
Max. Io = 250mA
(SMD 3pin SOT89)
AC925
MCP1700 - 3.3V
Vo = +3.3V ± 2%
Vi = +3.58V to +6.0V
Max. Io = 250mA
(SMD 3pin SOT89)
AC926
MCP1700 - 5.0V
Vo = +5.0V ± 2%
Vi = +5.25V to +6.0V
Max. Io = 250mA
(SMD 3pin SOT89)
AA707
EB735
EB728
AC494
EB713
LM2936Z-5.0V Reg micro power
5V 50mA (TO92)
78L05
IC Regulator +5V 100mA
(TO92)
LP2950CZ-5.0 Reg micro power
5V 100mA (TO92)
MC78M05CDT Positve Voltage Reg.
5V 500mA (SMD DPAK)
7805
IC Regulator +5V 1A
(TO220)
7805P
IC Regulator +5V 1A
isolated tab (TO220)
LM2940T-5 low dropout 5V 1A (TO220)
7805KC
Regulator +5V 1.5A (TO3)
L78S05
Regulator +5V 2A (TO220)
LM323K
Regulator +5V 3A (TO3)
HB270
78L06
HB265
7806
HB104
78L08
HB108
7808
HB300
78L09
HB298
7809
HB103
AA698
EB739
HB107
AC495
(TO92)
IC Regulator +6V 1A
(TO220)
(TO92)
IC Regulator +8V 1A
(TO220)
(TO92)
IC Regulator +9V 1A
(TO220)
HB299
HB105
HB109
EB734
AC496
EB729
AA896
7810
LM350T
HB121
DB550
LM723CN
TL431
78L12
(TO92)
7812
IC Regulator +12V 1A
(TO220)
LM2940T-12 low dropout 12V 1A
(TO220)
7812P
7812KC
Regulator +12V 1.5A
(TO3)
EB722
PB137ACV
13.7V Regulator 2A max.
used for Lead Acid battery
charger (TO220)
EB724
(TO92)
(TO220)
Regulator +15V 1.5A
(TO3)
EB746
HB106
78L15
HB110
7815
AC497
7815P
EB730
7815KC
AC498
78L18
HB267
7818
AC499
78L24
HB268
7824
HB111
79L05
HB115
(TO220)
EB721
7905
(TO92)
(TO220)
(TO92)
(TO220)
REGULATORS SWITCHING, PWM
AND CHARGE PUMP
AC502
EB723
EB737
EB750
EB751
EB752
EB731
AC943
AA303
EB732
7906
IC Regulator -6V 1A
(TO220)
HB112
79L08
HB116
7908
GB578
7909
IC Regulator -8V 100mA
(TO92)
IC Regulator -8V 1A
(TO220)
IC Regulator -9V 1A
(TO220)
AA304
DB736
HB113
79L12
HB117
7912
HB114
79L15
HB118
7915
EB717
7915KC
EB415
7918
DB737
EB702
AD155
(TO92)
IC Regulator -12V 1A
(TO220)
AA268
GB267
(TO92)
(TO220)
Regulator -15V 1.5A
(TO3)
EB709
FB464
AA677
EB808
DB729
EB416
7924
(TO220)
(TO220)
REGULATORS VARIABLE
VOLTAGE AND CURRENT
HB122
L200C
EB712
LM317K
HB119
LM317L
HB120
LM317T
EB715
LM334Z
JB216
LM334Z
AA047
LM337T
JB129
LM338K
EB719
LM338T
Regulator Adjust V & I
(5pin TO220)
Adust + Voltage Regulator
37V 1.5A (TO3)
Regulator 1.2 to 37V
100mA (TO92)
Regulator 1.2 to 37V 1.5A
(TO220)
Adjust Current Source
(TO92)
Adjustable Current Source
(TO92)
adjustable 1.5A negative
regulator (TO220)
Regulator 1.2 to 37V 5A
(TO3)
Adust Positve Voltage
SG3524N
Switching Regulator
(DIP16)
CA3524E Regulating SMPSU
Pulse Width Modulator
(DIP16)
SG3525AN PWM reg. + soft start
(DIP16)
3526CP
Voltage Mode PWM
Regulator (DIP18)
MC34063AP DC->DC Converter 40V
1.5A (DIP8)
TL494CN Switching Regulator
(DIP16)
UC3842N Switching Current
Regulator 1A (DIP8)
UC3843N Current Mode Controller
(DIP8)
UC3844N Current Mode PWM
Control (DIP8)
ICL7660CPA
Voltage Inverter
capacitor charge pump used
+(1.5 - 10)V to -(1.5 - 10)V
Io: 0 - 20mA, Ro: 55 Ohm
(DIP8)
TC962CPA
Voltage Inverter
capacitor charge pump used
+(3 - 18)V to -(3 - 18)V
Io: 0 - 80mA, Ro: 35 Ohm
(DIP8)
GB341
GB275
GB343
Convert (DIP8)
Audio IC COB for DIY Kit SG02M
Audio IC COB for DIY Kit 52m
Audio IC COB for DIY Kit SG04M
TIMERS, OSCILLATORS & WAVEFORM GENERATORS
HB271
HB101
FB243
HB100
JB065
EB907
JB139
AC504
JB138
7556/TS556 dual 555 CMOS timer
(DIP14)
GLC555
CMOS Timer (low power
555) (DIP8)
LM556N
Dual Timer (DIP14)
NE555
HA17555 IC Timer (DIP8)
NE556
dual 555 timer (DIP14)
TS555CN low power single CMOS
timer (DIP8)
XR2206
Waveform generator
(DIP16)
XR2207
Voltage Controlled Oscillator
Waveform generator (DIP14)
XR8038
Waveform generator
(DIP14)
VOLTAGE COMPARATORS
JB058
JB060
LM311
LM339
JB059
LM393
Voltage Comparator (DIP8)
Quad Voltage Compatator
(DIP14)
Dual Voltage Compatator
(DIP8)
TRANSISTORS
TRANSISTORS 20pcs
SPECIAL FUNCTIONS
(TO92)
IC Regulator -5V 1A
(TO220)
HB269
Regulator 5A (TO220)
Adj. Voltage regulator 1.2
32V 3A (TO220)
Voltage Regulator (DIP14)
Adj. Voltage Reference
(TO92)
AA764
AA176
AB756
AA678
AA679
EB738
GB191
GB192
GB678
FB469
GB345
AA626
AA438
AB561
EB753
EB754
CA3161E
BCD to Seven Segment
Decoder/Driver (DIP16)
CA3162E A/D Converter for 3-digit
Display (DIP16)
CM8870PI KT3170N low power DTMF
receiver (DIP18)
ICL7106CPL A to D Converter with LCD
driver (DIP40w)
ICL7107
A to D Converter with LED
driver (DIP40w)
ICL7136CPL A/D + LO Power LCD
Driver (DIP40)
AY0438
4-Digits 32-Segments Static
CMOS LCD Driver (DIP40w)
ICL7673CPA battery back up (DIP8)
ICM7224IPL Counter 0-19999 with LCD
driver (DIP40w)
LF398N
Monolithic Sample-and
Hold Circuit (DIP8)
LM2907N-14 Frequency to Voltage
Conv. (DIP14)
LM2917N Frequency to Voltage
converter (DIP14)
LM2917N-8 Frequency to Voltage con
verter (DIP8)
LM331
Voltage to frequency con
verter (DIP8)
LM567 / NE567
Tone decoder
(DIP8)
M66T-19L Melody transistor (TO92)
SAE800
Melody IC for FB677 (DIP8)
MC145026 coder (DIP16)
MC145027 decoder (DIP16)
MC34064P-5
Under Voltage
Sensor (TO92)
M3481
Music IC for DIY Kit 104
M3485
Music IC for DIY Kit 104
DS1307
Real Time Clock, 64 Byte
user memory (DIP8)
PCF8583P Clock/calender with RAM
(DIP8)
SG06
Set of 2 different Melody
ICs for DIY Kit
TDA1524A Stereo Audio Controller
UM3750
Programmable
Encoder/Decoder (DIP18)
UM3758
Tri-state Programmable
Encoder/Decoder (DIP18)
XR-2211ACP FSK Modulator/DE-MOD
Tone Decoder (DIP14)
XR4151CP Voltage to Frequency
07.52
AB641
A mixed pack that contains 20 transistors
and a data pamphlet.
ORDER CODE: AB641
NPN SILICON BPJ TRANSISTORS
FB147
AA861
FB148
DB251
DB213
AB394
DB743
AC946
AA862
AA863
FB149
HB022
2N1711
NPN 50V 600mA 70MHz
Hfe100 (T05)
2N1893
NPN 80V 0.5A 50MHz
Hfe40 (TO5)
2N2218A
NPN 40V 800mA 250MHz
Hfe40 (TO5)
2N2219A
NPN 60V 0.8A 300MHz
Hfe100 (TO5)
2N2222A NPN 40V 0.6A 300MHz
Hfe50/300 (TO18)
P2N2222A NPN 40V 0.6A 300MHz
Hfe150 (TO92)
PN2222A NPN 40V 0.6A 300MHz
Hfe50/300 (TO92)
SMBT2222A NPN 40V 0.6A 300MHz
Hfe35/300 SMD (SOT23)
2N2369
NPN 15V 0.5A 500MHz
Hfe40 (TO18)
2N2714
NPN 18V 0.1A Hfe80
(TO98)
2N3019
NPN 80V 1A 100Mhz
Hfe100 (TO5)
2N3053
NPN 60V 0.7A 100Mhz
Hfe50 (TO5)
FB150
HB023
FB151
AA864
AA865
EB818
AA310
2N3054
2N3055
2N3439
2N3440
2N3705
2N3772
2N3773
AA006
2N3904
DB401
2N4401
AA893
FB154
AA870
DB470
HB019
AA859
AA860
AA767
DB454
AA742
EB903
AA879
EB904
EB930
AA480
AA792
DB207
DB208
FB157
FB158
DB209
2N4427
2N4923
2N5551
2N6488
2N697
2N916
2N929
2SC1815
2SC3150
2SC3281
2SD1555
2SD313
2SD350
2SD669
2SD756
AC187-01
BC107B
BC108B
BC108C
BC109B
BC109C
HB021
BC140
AA055
BC141
FB159
AC542
AA790
AA531
EB897
AA184
FB160
AA795
FB161
AA798
DB019
FB163
AA800
FB164
BC141-10
BC141-16
BC147
BC167
BC169C
BC182B
BC182L
BC183
BC184B
BC207B
BC237B
BC237C
BC238B
BC238C
NPN 60V 4A 750KHz
Hfe25 (TO66)
NPN 60V 15A 0.2Mhz
Hfe20/70 (TO3)
NPN 350V 1A 15MHz
Hfe40 (TO5)
NPN 250V 1A 15MHz
Hfe40 (TO5)
NPN 30V 0.8A 100MHz
Hfe150(TO92)
NPN 60V 30A 200KHz
Hfe15/60 (TO3)
NPN 140V 30A 200KHz
15/60 (TO3)
NPN 60V 200mA
250MhzHfe100 (TO92)
ZTX300 NPN 40V 0.6A
250Mhz Hfe100 (TO92)
NPN 20V 0.4A 500MHz
Hfe10 (TO39)
NPN 80V 3A 3MHz Hfe20
(TO126)
NPN 160V 0.6A 100MHz
Hfe80 (TO92)
NPN 90V 15A 5Mhz
Hfe20 (TO220)
NPN 40V 0.5A 50Mhz
Hfe40/120 (TO5)
NPN 25V 0.1A 300MHz
Hfe50 (TO18)
NPN 45V 30mA 30MHz
Hfe40 (TO18)
NPN 50V 150mA 80MHz
Hfe70/700 (TO92)
NPN 800V 3A 15Mhz
Hfe10 (TO220)
NPN 200V 15A 30Mhz
Hfe55/160 (TOP3)
NPN 5A 3MHz Hfe8
(TOP3)
(TO220)
NPN 700V 11A Hfe3/8
(TO3)
NPN 120V 1.5A Hfe60/320
(TO126)
Hfe250 (TO92)
(X04)
NPN 50V 0.1A 150Mhz
Hfe200 (TO18)
NPN 30V 0.1A 150Mhz
Hfe200 (TO18)
Hfe420 (TO18)
Hfe200 (TO18)
NPN 30V 0.1A 150Mhz
Hfe420 (TO18)
NPN 40V 1A 50Mhz Hfe40
(TO39)
NPN 60V 1A 50Mhz
Hfe100 (TO39)
(TO39)
(TO39)
NPN 45V 0.2A 150MHz
Hfe110 (3pin X09)
NPN 45V 100mA 85MHz
Hfe120 (TO92)
NPN 20V 100mA 85MHz
Hfe380 (TO92)
Hfe120 (TO92)
Hfe120 (TO92)
NPN 30V 0.2A 150MHz
Hfe120 (TO92)
Hfe240 (TO92)
NPN 45V 0.1A 150MHz
Hfe240 (TO106)
NPN 50V 0.1A 150Mhz
Hfe200 (TO92)
Hfe420 (TO92)
NPN 20V 0.1A 150MHz
Hfe200 (TO92)
AA801
FB167
AA808
AA810
DB210
AC543
DB211
AB618
DB212
AA899
AA683
EB004
AA704
AA814
AA815
HB024
HB025
FB170
HB026
DB406
AA253
FB181
DB448
DB456
FB185
AA823
DB553
DB554
EB813
AA827
AA828
AA829
AA832
AA833
AA834
AA650
FB187
HB020
EB906
HB316
FB189
FB190
FB192
AA432
AC551
Hfe420 (TO92)
NPN 20V 0.1A 150MHz
Hfe200 (TO92)
BC337-40 NPN 45V 800mA 60MHz
Hfe250 (TO92)
BC338-25 NPN 20V 0.8A 60MHz
Hfe160 (TO92)
BC546B
NPN 65V 0.1A 150MHz
Hfe200 (TO92)
BC547B
NPN 50V 0.1A 200Mhz
Hfe200 (TO92)
BC547C
NPN 50V 0.1A 200Mhz
Hfe420 (TO92)
BC548B
NPN 30V 0.1A 200Mhz
Hfe200 (TO92)
BC548C
NPN 30V 0.1A 200Mhz
Hfe420 (TO92)
BC549B
NPN 30V 0.1A 200MHz
Hfe200 (TO92)
BC549C
NPN 30V 0.1A 200MHz
Hfe420 (TO92)
BC550C
NPN 45V 0.1A 200Mhz
Hfe420 (TO92)
BC637
(TO92)
BC639
(TO92)
BC817-40 NPN 45V 0.5A 100MHz
BC847B
NPN 45V 0.1A 100MHz
Hfe150 SMD (SOT23)
BD131
NPN 45V 3A 60Mhz
Hfe30 (TO126)
BD135
NPN 45V 1A 50Mhz
Hfe40/250 (TO126)
BD137
(TO126)
BD139
NPN 80V 1A 50Mhz
Hfe40/160 (TO126)
BD237
(TO126)
BD239C
(TO220)
BD241C
(TO220)
BD243C
(TO220)
BD249C
NPN 115V 40A 3Mhz
Hfe25 (TOP3)
BD437
(TO126)
BD439
(TO126)
BD711
NPN 100V 12A 3MHz
Hfe15/150 (TO220)
BD911
NPN 100V 15A 3MHz
Hfe15/150 (TO220)
BF199
NPN 20V 25mA 275MHz
Hfe38 (TO92)
BF224
NPN 30V 50mA 300MHz
Hfe30 (TO92)
BF255
NPN 40V 50mA 400MHz
Hfe30 (TO92)
BF259
NPN 300V 0.1A 90MHz
Hfe25 (TO39)
BFG65
Hfe60 planar (SOT103)
BFR91A
NPN 12V 35mA 6GHz
Hfe40 planar (X37)
BFR93A
NPN 12V 35mA 4.5GHz
Hfe50 SMD (SOT23)
BFW92A
Hfe20/150 planar (X37)
BFY50
(TO39)
BFY51
(TO5)
BU208A
NPN 700V 5A 4MHz
Hfe2.5 (TO3)
BU208D
(TO3)
BU2508AF NPN 700V 8A Hfe4
isolated tab (SOT199)
BU326A
(TO3)
BU426A
(TOP3)
BU508A
NPN 700V 8A Hfe10
(TOP3)
BU508AF NPN 700V 8A 7MHz Hfe6
FB193
BU508DF
AA840
BU806
AA353
BUT11A
AD224
BUT11AF
AA354
BUW11A
FB196
BUY69A
GB322
EB898
AA741
H1061
KTC9018C
MJ15003
FB211
MJ802
FB212
MJE13005
FB213
MJE13007
FB215
MJE3055T
AA844
MJE340
AA846
MPSA06
EB352
MPSA42
FB217
MPSA44
AA674
MPSH10
EB902
S2000
AA849
TIP29C
DB741
TIP3055
HB027
TIP31
FB224
TIP31C
AA851
TIP33C
AA853
TIP35C
HB028
TIP41
FB226
TIP41C
FB228
TIP49
AA855
TIP50
GB202
ZTX1053A
GB257
ZTX320
BC239B
07.53
NPN 200V 8A Hfe100
(TO220)
NPN 450V 5A Hfe5
(TO220)
NPN 450V 5A Hfe10
NPN 450V 5A Hfe5
(TOP3)
NPN 1000V 10A 2MHz
Hfe15 (TO3)
NPN 3A Hfe50 (TO220)
NPN 30V 20mA (TO92)
NPN 140V 20A 2MHz
Hfe25 (TO3)
(TO3)
(TO220)
(TO220)
(TO220)
NPN 300V 0.5A 10MHz
Hfe30 (TO126)
NPN 80V 0.5A 100MHz
Hfe50 (TO92)
NPN 300V 0.5A 50MHz
Hfe40 (TO92)
Hfe40 (TO92)
NPN 25V 0.5A Hfe60
TO92
NPN 1500V 5A 7MHz
Hfe2.2 (TOP3)
(TO220)
NPN 70V 15A 3Mhz
Hfe20/70 (TOP3)
NPN 40V 3A 3Mhz
Hfe20/100 (TO220)
NPN 100V 3A 3MHz
Hfe20 (TO220)
NPN 100V 10A 3MHz
Hfe20 (TOP3)
NPN 100V 25A 3MHz
Hfe10 (TOP3)
NPN 40V 6A 3Mhz
Hfe15/75 (TO220)
(TO220)
NPN 350V 1A 10MHz
Hfe30 (TO220)
NPN 400V 1A Hfe30
(TO220)
NPN 40V 3A 150Mhz
Hfe30 (TO92)
NPN 15V 0.5A 600Mhz
Hfe20 (TO92)
PNP SILICON BPJ TRANSISTORS
DB453
AA476
AB395
FB218
AC948
AA007
AA868
AA869
AA894
DB552
AA874
AA479
AA791
HB031
DB408
2N2905A
PNP 60V 0.6A 200Mhz
Hfe100 (TO5)
2N2907A
PNP 60V 0.6A 200MHz
Hfe50/300 (TO18)
P2N2907A PNP 60V 0.6A 200MHz
Hfe150 (TO92)
PN2907A PNP 60V 0.6A 200MHz
Hfe100/300 (TO92)
SMBT2907A PNP 60V 0.6A 200MHz
2N3906
PNP 40V 200mA 250Mhz
Hfe100 (TO92)
2N4403
PNP 40V 0.6A 200MHz
Hfe100 (TO92)
2N5401
PNP 150V 0.6A 100MHz
Hfe60 (TO92)
2SA1013
PNP 160V 1A 15MHz
Hfe60 (TO92)
2SA872A PNP 120V 50mA 60MHz
Hfe250 (TO92)
2SA970
PNP 120V 0.1A 50MHz
Hfe200 (TO92)
2SB716
PNP 120V 50mA 60MHz
Hfe250 (TO92)
BC157
PNP 45V 0.1A 130MHz
Hfe70 (X09)
BC160
PNP 40V 1A 50Mhz Hfe60
(TO39)
BC161-10 PNP 60V 1A 50Mhz Hfe60
DB214
BC177B
DB215
BC178C
DB216
BC179C
AA797
BC204B
AA185
FB162
BC212B
BC212L
AA799
BC214
AA802
BC257B
AA803
AA804
BC258B
BC259B
AA766
BC261A
AA805
BC307B/1
AA806
BC308B
HB030
BC327
FB165
BC327-25
FB166
BC327-40
AA807
BC328-25
AA809
BC369
FB168
BC556B
DB217
BC557B
AC544
BC557C
DB218
BC558B
AC545
BC558C
FB169
BC559B
DB219
BC559C
AA684
BC560C
AA705
BC640
AC947
BC807-40
AA821
BCX42
HB033
BD132
HB034
BD136
FB059
BD138
HB035
BD140
DB407
BD238
AA252
BD240C
FB182
BD242C
FB184
BD244C
DB457
BD250C
AA826
BD438
DB555
BD712
DB556
BD912
EB842
BF324
AA830
BF970
AA835
BFR99
HB032
MJ2955
(TO39)
PNP 45V 0.1A 130Mhz
Hfe180 (TO18)
PNP 25V 0.1A 100Mhz
Hfe380 (TO18)
PNP 20V 0.1A 100Mhz
Hfe380 (TO18)
PNP 45V 0.1A 100MHz
Hfe240 (TO106)
PNP 50V 200mA 200MHz
Hfe200 (TO92)
Hfe50 (TO92)
PNP 30V 0.2A 200MHz
Hfe140 (TO92)
PNP 45V 0.1A 130MHz
Hfe180 (TO92)
PNP 25V 0.1A 130MHz
Hfe180 (TO92)
PNP 20V 0.1A 130MHz
Hfe200 (TO92)
Hfe125 (TO18)
PNP 45V 0.1A 130MHz
Hfe240 (TO92)
PNP 25V 0.1A 100MHz
Hfe240 (TO92)
PNP 45V 0.8A 60Mhz
Hfe100 (TO92)
PNP 45V 800mA 60MHz
Hfe160 (TO92)
PNP 45V 800mA 60MHz
Hfe250 (TO92)
PNP 25V 0.8A 60MHz
Hfe160 (TO92)
PNP 20V 1A 65MHz Hfe85
(TO92)
Hfe240 (TO92)
PNP 50V 0.1A 100Mhz
Hfe200 (TO92)
PNP 50V 0.1A 100Mhz
Hfe420 (TO92)
PNP 25V 0.1A 100Mhz
Hfe420 (TO92)
PNP 25V 0.1A 100Mhz
Hfe420 (TO92)
PNP 25V 100mA 75MHz
Hfe240 (TO92)
PNP 25V 0.1A 25Mhz
Hfe420 (TO92)
PNP 45V 0.1A 150Mhz
Hfe420 (TO92)
(TO92)
PNP 45V 0.5A 80MHz
PNP 125V 0.8A 100MHz
Hfe25 SMD (SOT23)
(TO126)
PNP 45V 1A 50Mhz
Hfe40/250 (TO126)
PNP 60V 1.5A 50MHz
Hfe40 (TO126)
PNP 80V 1A 50Mhz
Hfe40/250 (TO126)
(TO126)
(TO220)
(TO220)
(TO220)
PNP 115V 25A 3Mhz
Hfe25 (TOP3)
(TO126)
PNP 100V 12A 3MHz
Hfe15/150 (TO220)
PNP 100V 15A 3MHz
Hfe15/150 (TO220)
PNP 30V 25mA 350MHz
Hfe25/60 (TO92)
PNP 35V 30mA 900MHz
Hfe25/90 planar (X37)
PNP 25V 50mA 1.4GHz
Hfe25 (TO72)
PNP 100V 15A 4Mhz
Hfe20/70 (TO3)
FB210
FB214
AA845
AA847
AA848
DB742
AA850
FB225
AA852
AA854
FB227
MJ4502
PNP 90V 30A 2MHz
Hfe25 (TO3)
MJE2955T PNP 60V 10A 2MHz Hfe20
(TO220)
MJE350
PNP 300V 0.5A 4MHz
Hfe30 (TO126)
MPSA56
PNP 80V 0.5A 50MHz
Hfe50 (TO92)
MPSA92
PNP 300V 0.5A 50MHz
Hfe25 (TO92)
TIP2955
(TOP3)
TIP30C
PNP 100V 1A 3MHz
Hfe40 (TO220)
TIP32C
(TO220)
TIP34C
PNP 100V 10A 3MHz
Hfe20 (TOP3)
TIP36C
PNP 100V 25A 3MHz
Hfe10 (TOP3)
TIP42C
PNP 100V 6A 3MHz
Hfe15 (TO220)
DARLINGTON SILICON
TRANSISTORS
DB463
BC516
DB464
BC517
AC546
BC618
AA819
BCV47
AA825
BD334
AC952
BD645
AC547
BD649
AC548
BD650
AC549
BD675
AC550
BD676
FB186
BD677
AA891
BD678A
DB458
BD681
DB459
BD682
AA309
BDW93C
AA308
BDW94C
DB460
BDX53C
DB461
BDX54C
AC552
MJ3001
EB821
MJ11016
FB216
MPSA13
FB220
TIP107
EB926
TIP112
EB927
TIP117
AA990
TIP121
HB029
TIP122
FB221
TIP126
HB038
TIP127
AA856
TIP132
FB222
TIP137
FB223
TIP142
AA857
TIP147
PNP 40V 400mA 150Mhz
Hfe30000 (TO92)
NPN 40V 400mA 120Mhz
Hfe30000 (TO92)
NPN 55V 500mA 155Mhz
Hfe2000 (TO92)
Hfe2000 SMD (SOT23)
(TO126)
(TO220)
(TO220)
(TO220)
(TO126)
(TO126)
(TO126)
(TO126)
NPN 100V 4A 1Mhz
Hfe750 (TO126)
PNP 100V 4A 1Mhz
Hfe750 (TO126)
NPN 100V 15A 20MHz
Hfe750 (TO220)
PNP 100V 15A 20MHz
Hfe750 (TO220)
NPN 100V 8A 50Mhz
Hfe750 (TO220)
PNP 100V 8A 50Mhz
Hfe750 (TO220)
NPN 80V 10A Hfe1000
150W (TO3)
NPN 120V 30A Hfe1000
200W (TO3)
KSP13
Hfe5000 (TO92)
PNP 100V 8A 4MHz
Hfe1000 (TO220)
NPN 100V 2A Hfe750
(TO220)
PNP 100V 2A Hfe750
(TO220)
NPN 80V 5A Hfe1000
(TO220)
NPN 100V 5A 4Mhz
Hfe1000 (TO220)
PNP 80V 5A 4MHz
Hfe1000 (TO220)
PNP 100V 5A 4Mhz
Hfe1000 (TO220)
NPN 100V 12A Hfe1000
(TO220)
PNP 100V 12A Hfe1000
(TO220)
NPN 100V 10A 4Mhz
Hfe500 (TOP3)
PNP 100V 10A Hfe500
(TOP3)
JUNCTION FET / RF MOSFET
HB039
2N3819
FB152
2N3820
AC535
BF245A
AA411
BF245B
AC536
BF245C
AA255
BF256B
HB301
BF982
AA831
BF989
AA872
2N7000
POWER MOSFETs
AA873
AA477
AA478
AA837
HB043
AD148
AC553
AC537
FB197
FB198
DB462
DB466
AA842
DB468
FB199
FB200
FB720
FB203
DB469
AC777
FB204
AC538
DB467
AA355
EB413
AD004
FB205
AA843
FB206
FB207
AC539
AC540
GB716
07.54
N-Ch. 25V 20mA Vgs25
Yfs4000 (TO92)
P-Ch. 20V 10mA 360mW
(TO92)
N-Ch. JFET Transistor
30V Idss=6.5mA (TO92)
30V Idss=15mA (TO92)
30V Idss=25mA (TO92)
N-Ch. JFET Vgss= -20V
Idss=6 to 13mA (TO92)
N-Ch. dual-gate MOSFET
20V 40mA planar (SOT103)
N-Ch. dual-gate MOSFET
20V 20mA SMD (SOT143)
N-ch. 60V 0.2A 5E
Vgs±20V (TO92)
2N7002
N-ch. 60V 180mA 5.3E
Vgs±20V SMD (SOT23)
2SJ162
(2SJ49) P-ch. 160V 7A
Vgs±15V (TO3P)
2SK1058
(2SK134) N-ch. 160V 7A
Vgs±15V (TO3P)
BS107
N-ch. 200V 0.15A 28E
Vgs±20V (TO92)
BS170
N-ch. 60V 0.5A 5E
Vgs±20V (TO92)
STP36NF06 N-ch. 60V 30A 0.04E
Vgs±20V (TO220)
BUZ73A
N-ch. 200V 5.5A 0.6E
Vgs±20V (TO220)
BUZ80A
N-ch. 800V 3A 3E
Vgs±20V (TO220)
IRF510
N-ch. 100V 4A 0.6E
Vgs±20V (TO220)
IRF520
N-ch. 100V 8A 0.3E
Vgs±20V (TO220)
IRF530
N-ch. 100V 14A 0.18E
Vgs±20V (TO220)
IRF540
N-ch. 100V 27A 0.085E
Vgs±20V (TO220)
IRF630
N-ch. 200V 9A 0.4E
Vgs±20V (TO220)
IRF640
N-ch. 200V 18A 0.18E
Vgs±20V (TO220)
IRF710
N-ch. 400V 1.5A 3.6E
Vgs±20V (TO220)
IRF730
N-ch. 400V 5.5A 1E
Vgs±20V (TO220)
IRF740
N-ch. 400V 10A 0.55E
(TO220)
IRF830
N-ch. 500V 4.5A 1.5E
Vgs±20V (TO220)
IRF840
N-ch. 500V 8A 0.85E
Vgs±20V (TO220)
IRF3205
N-ch. 55V 75A 0.008E
Vgs±20V (TO220AB)
IRF9530
P-ch. 100V 10A 0.3E
Vgs±20V (TO220)
IRF9520N P-ch. 100V 6.8A 0.48E
Vgs±20V (TO220)
IRF9540N P-ch. 100V 23A 0.2E
Vgs±20V (TO220)
IRF9630
P-ch. 200V 6.5A 0.8E
Vgs±20V (TO220)
IRF9640
P-ch. 200V 11A 0.5E
Vgs±20V (TO220)
IRFBE30
N-ch. 800V 4.1A 3E
Vgs±20V (TO220)
IRFP150
N-ch. 100V 40A 0.055E
Vgs±20V (TO247)
IRFP250
N-ch. 200V 30A 0.08E
Vgs±20V (TO247)
IRFP450
N-ch. 500V 13A 0.4E
Vgs±20V (TO3P)
IRFP460
N-ch. 500V 20A 0.27E
Vgs±20V (TO247)
IRFP530
N-ch. 400V 15A 0.3E
Vgs±20V (TO247)
IRFP9140N P-ch. 100V 19A 0.12E
Vgs±20V (TO247)
IRLZ44N
N-ch. 55V 40A 0.022E
DB465
AA588
AC541
FB230
5V logic level Vgs drive
(TO220)
IRFZ44
N-ch. 60V 50A 0.028E
Vgs±20V (TO220)
PHP37N06T N-ch. 55V 37A 0.035E
(TO220)
RFP50N06 N-ch. 60V 50A 0.022E
(TO220)
VN2222LL N-ch. 60V 0.75A 7.5E
(TO92)
AC555
EB932
AC556
AB344
JB128
JB057
W10G
Diode Bridge Rectifier
1000V 1.5A
KBP206
600V 2A in line
RS406/L
800V 4A in line
RS606
560V 6A in line
Diode Bridge Rectifier 6A 400V
Diode Bridge Rectifier 6A 800V
AA412
1N914
Small Signal Diode 75V
75mA max Vf = 1V / 10mA
UNIJUNCTION TRANSISTORS
HB044
AA871
2N2646 30V 50mA (TO18)
2N6027 Programmable UJ-Transistor,
40V 150mA (TO92)
DIODES
Note: Lead Information
DIODE PACK 100pcs
EB230
MB085
MB149
MB150
Diode
Diode
Diode
Diode
Bridge
Bridge
Bridge
Bridge
Rectifier
Rectifier
Rectifier
Rectifier
15A
25A
35A
50A
400V
400V
400V
400V
RECTIFIER DIODES FAST
RECOVERY
Blister pack that contains 100 1N4148 small
signal diodes 75V 150mA: 100 x (HB052).
ORDER CODE: AB761
SCHOTTKY RECTIFIERS
AB625
A mixed pack that contains 100 diodes and a
data pamphlet.
ORDER CODE: AB625
RECTIFIER DIODES
Note: General purpose rectifier
diodes.
HB053
HB054
AC558
HB307
1N4007
1N5408
BY228
PX6A06
Rectifier
Rectifier
Rectifier
Rectifier
Diode
Diode
Diode
Diode
1000V 1A
1000V 3A
1500V 3A
600V 6A
Note: Suitable for high frequency
circuits.
EB427
BYW95C
Fast soft-recovery rectifier
1.25A 600V 250ns
axial (SOD-64)
EB418
FR107
RP1510 Fast recovery
1A 1kV 500ns
axial (DO-41)
EB420
FR307
RP3103A Fast recovery
3A 1kV 500ns
axial (DO-201AD)
AC559
SF52
Ultra Fast Rectifier
5A 100V 35ns
axial (DO-201AD)
EB421
FR607
RP6106A Fast recovery
6A 1Kv 500ns
axial (R-6)
MB151
BYV29F-500 Ultra Fast rectifier
9A 500V 50ns isolated tab
2 pin TO220 (SOD100)
AB519
MUR1510
GB502
BYW81PI-200 high efficiency
fast recovery rectifier
15A 200V 40ns isolated tab
2 pin TO220 (TO-220AC)
Blister pack that contains 30 1N4007 rectifier AC778
diodes 1000V 1A: 30 x (HB053).
ORDER CODE: AB755
DIODE BRIDGE RECTIFIERS
AA565
FB476
AA629
DB578
DB579
AA956
BAT85
BAT48
1N5819
1N5822
1N5825
Signal Diode 200mA / 30V
Signal Diode 350mA / 40V
Schottky Rectifier 1A / 40V
Schottky Rectifier 3A / 40V
SB540 Schottky Rectifier
5A / 40V Vf=0.67V max.
AC775
MBR1645
Schottky Power Rectifier
15A / 45V Vf=0.63V max.
GERMANIUM SIGNAL DIODES
DB451
HB051
VOLTAGE REFERENCES
LM385Z-1.2
Vr = 1.235V ± 2.2%
Vr / Ir = 20mV / 20mA
Ir = 20µA - 20mA (TO92)
EB716
LM336Z-2.5
Vr = 2.49V ± 4%
Vr / Ir = 10mV / 10mA
Ir = 400µA - 10mA (TO92)
DB551
LM385Z-2.5
Vr = 2.5V ± 3%
Vr / Ir = 20mV / 20mA
Ir = 30µA - 20mA (TO92)
AC911
MCP1525-ITO
Vo = 2.5V ± 1%
Vi = 2.7V - 5.5V
Vo / Io = 2mV / 2mA
Io = 0mA to ±2mA (TO92)
AC912
MCP1541-ITO
Vo = 4.096V ± 1%
Vi = 4.3V - 5.5V
Vo / Io = 2mV / 2mA
Io = 0mA to ±2mA (TO92)
EB718
LM336Z-5.0
Vr = 5V ± 4%
Vr / Ir = 20mV / 10mA
Ir = 600µA - 10mA (TO92)
EB714
LM329DZ
Vr = 6.925V ± 4.7%
Vr / Ir = 20mV / 15mA
Ir = 600µA - 15mA (TO92)
BYW51-200 high efficiency fast recovery
Dual 10A 200V 25ns
centre common cathode
AA687
3 pin TO220 (TO-220AB)
SILICON SIGNAL DIODES
HB052
1N4148
HB055
AC557
1N4448
400V 1.5A
LM4040DIZ-10.0
Vr = 10V ± 2%
Vr / Ir = 18mV / 15mA
Ir = 113µA - 15mA (TO92)
ZENER DIODES 500MW 5%
Note: General purpose diode
bridge rectifiers.
W04
Signal Diode 45V 50mA
Signal Diode 115V 50mA
AA577
Ultra Fast Rectifier
15A 100V 35ns
BYV32E200 high efficiency fast recovery
Dual 10A 200V 25ns
centre common cathode
3 pin TO220 (TO-220AB)
1N60
OA91
150mA max Vf = 1V / 10mA
150mA max Vf = 1V / 0.1A
07.55
HB243
HB056
HB057
2.4V
2.7V
3.0V
HB323
HB067
HB068
12V
13V
15V
HB058
HB059
HB060
HB318
HB061
HB062
HB063
HB319
HB064
HB320
HB065
HB321
HB066
HB322
3.3V
3.6V
3.9V
4.3V
4.7V
5.1V
5.6V
6.2V
6.8V
7.5V
8.2V
9.1V
10V
11V
HB041
HB069
HB070
HB324
HB325
HB326
HB071
HB327
HB328
HB329
HB330
HB331
HB333
HB335
16V
18V
20V
22V
24V
27V
30V
33V
36V
39V
43V
47V
56V
75V
AC774
BB105
AB989
NTE610
AB990
NTE614
AB991
NTE618
UHF /TV variable cap. diode
11.5pF/3V, 2.8pF/25V 1MHz
one diode (SOD23 / CE37)
FM / TV variable cap. diode
6.8pF/4V, 2.8pF/30V 1MHz
one diode (2 pin TO92)
FM / TV variable cap. diode
33pF/4V, 12pF/30V 1MHz
AM variable cap. diode
420pF/1.2V, 24pF/8V 1MHz
LEDS
typical.
The cathode (negative shorter
lead) is denoted by the flat side
on the package.
HB075 3mm Green 2.0V 15 mcd
HB074 3mm Red 2.0V 5.0 mcd
HB076 3mm Yellow 2.0V 12.5 mcd
HB078 5mm Green 2.0V 20.0 mcd
HB077 5mm Red 2.0V 8.0 mcd
HB079 5mm Yellow 2.0V 20.0 mcd
ZENER DIODES 1W 5%
HB336
HB337
HB338
HB339
HB340
HB341
HB342
HB343
HB344
HB345
HB346
HB347
HB348
HB349
HB350
HB351
HB352
HB353
HB354
2.7V
3.3V
3.6V
3.9V
4.3V
4.7V
5.1V
5.6V
6.2V
6.8V
7.5V
8.2V
9.1V
10V
11V
12V
13V
15V
16V
HB355
HB356
HB357
HB358
HB359
HB360
HB361
HB362
HB363
HB364
HB365
HB366
HB367
AC560
AC561
AC562
HB368
FB495
18V
20V
22V
24V
27V
30V
33V
36V
39V
43V
47V
51V
56V
62V
68V
91V
100V
200V
ZENER DIODES 5W 5%
DB581
DB582
DB583
DB584
DB585
DB586
DB587
DB588
DB589
DB590
DB591
DB592
DB593
DB594
DB595
DB596
DB597
DB598
DB599
DB600
DB601
DB602
DB603
DB604
DB605
DB606
DB607
DB608
DB609
DB610
DB611
DB612
DB613
DB614
DB615
DB616
DB617
1N5333B 3.3V
1N5334B 3.6V
1N5335B 3.9V
1N5336B 4.3V
1N5337B 4.7V
1N5338B 5.1V
1N5339B 5.6V
1N5341B 6.2V
1N5342B 6.8V
1N5343B 7.5V
1N5344B 8.2V
1N5346B 9.1V
1N5347B 10V
1N5348B 11V
1N5349B 12V
1N5350B 13V
1N5352B 15V
1N5353B 16V
1N5355B 18V
1N5357B 20V
1N5358B 22V
1N5359B 24V
1N5361B 27V
1N5363B 30V
1N5364B 33V
1N5365B 36V
1N5366B 39V
1N5367B 43V
1N5368B 47V
1N5369B 51V
1N5370B 56V
1N5372B 62V
1N5373B 68V
1N5374B 75V
1N5375B 82V
1N5377B 91V
1N5378B 100V
DB697
GB330
DB3
Diac Vbo=32V It=2A
K1300E70 Sidac Vbo=120 - 138V
1A max. (2 pin TO-92)
Note: A LED (Light Emitting
Diode) converts electric current
to light. It can conduct current in
only one direction. Current If
flows into the LED at the longer,
positive lead (anode) and out the
shorter, negative lead (cathode).
The current should be more than
1mA and the maximum is usually
20mA. Each LED requires a forward voltage Vf to operate. A
EB920
BB204
FM / VHF 2 varicap diodes
36pF/3V, 14pF/30V at 1MHz
double diodes (TO92)
AA359 10mm Green 2.0V 20.0 mcd
AA382 10mm Red 1.8V 20.0 mcd
AA358 10mm Yellow 2.0V 20.0 mcd
protective resistor R can be connected in series with the LED to
limit the current flowing through
it.
How to calculate the resistor
value R:
R = (Vs - Vf) / If Ohm
where
Vs is the supply voltage used
across the series LED-resistor
combination
Blister pack that contains 30 green 3mm diffused 15 mcd LEDs: 30 x (HB075).
ORDER CODE: AB730
Vf is the voltage across the forward biased LEDs terminals
If is the current flowing through
the forward biased LED and
resistor R
Example:
Supply Voltage (Vs) = 12V
LED Voltage (Vf) = 1.7V
LED Current (If) = 10mA = 0.01A
Series resistor R = (12 - 1.7) /
0.01
= 1030 Ohm
the closest available value is
1000 Ohm
STANDARD DIFFUSED ROUND LEDs
DIACS
VARICAP DIODES
FB749 8mm Green 2.0V 20 mcd
FB770 8mm Red 1.9V 20 mcd
FB768 8mm Yellow 2.0V 20 mcd
Note: Max. current: 15mA
Max. reverse voltage: 5V
Indicated typical forward voltage
Vf for 10mA LED current.
Luminous Intensity Iv (mcd) is
07.56
Blister pack that contains 25 red 3mm diffused 5 mcd LEDs: 25 x (HB074).
ORDER CODE: AB728
5mm LEDs RED-GREEN-YELLOW
18 PIECES
AB650
A mixed pack that contains 18 LEDs. 5mm
round diffused: 3 yellow, 5 green and 10 red
ORDER CODE: AB650
SET WITH 50 GREEN LEDs
Blister pack that contains 15 yellow 3mm dif- Blister pack that contains 15 yellow 5mm diffused 12.5 mcd LEDs: 15 x (HB076).
fused 15 mcd LEDs: 15 x (HB079).
ORDER CODE: AB731
ORDER CODE: AB727
LED CREATIVE SET
Pack of 50 green 5mm LEDs 60 mcd max.
Used in the Advertisement Display (GC072).
ORDER CODE: GC073
SET WITH 50 RED LEDs
Blister pack that contains 20 green 5mm diffused 20 mcd LEDs: 20 x (HB078).
ORDER CODE: AB722
The set includes an assortment of approximately 50 LEDs and 20 resistors. Detailed
description and connecting diagrams are
included.
ORDER CODE: AA317
MANUFACTURER CODE: S093
Pack of 50 red 5mm LEDs 80 mcd max.
Used in the Advertisement Display (EB849).
ORDER CODE: GC074
HI-EFFICIENCY ROUND LEDs
LIGHT EMITTING DIODES 30pcs
Note: Indicated Vf for 10mA LED
current.
AA360 3mm Red 1.8V 20.0 mcd
AA361 5mm Red 1.7V 20.0 mcd
AA357 10mm Red 1.9V 120.0 mcd
AB643
A mixed pack that contains 30 LEDs (light
emitting diodes).
ORDER CODE: AB643
Blister pack that contains 20 red 5mm diffused 8 mcd LEDs: 20 x (HB077).
ORDER CODE: AB721
5mm RED LEDs 10pcs
AB656
A mixed pack that contains ten 5mm, red,
round, diffused LEDs
ORDER CODE: AB656
07.57
Blister pack that contains 15 hi-efficiency red
5mm diffused 20 mcd LEDs: 15 x (AA361).
ORDER CODE: AB729
SUPER BRIGHT ROUND LEDs
Note: Max. DC current: 20mA
Max. reverse voltage: 5V
The following are indicated:
forward voltage for 20mA current,
peak radiant emission wavelength,
half radiant intensity viewing
angle,
brightness for specified current.
AD241 5mm Ultraviolet, water clear lens
3.8V, 400nm, 20°
total radiant flux: 30mW at 20mA
(UV light is invisible to human eyes.
UV light exposure is harmful to your
skin and eyes. Do not use this LED
without appropriate UV protection.
Do not look into powered UV LED!)
AA381 3mm Red diffused
1.8V 600 mcd
AD250 3mm White water clear
3.2V 4500 mcd
AB718 5mm Purple water clear
3.5 - 4V 250 mcd
HB080 5mm Blue water clear
3 - 3.5V 1500 mcd
AB288 5mm Yellow water clear
2V 2800 mcd
AA045 5mm Green water clear
2.1V 100 mcd
AB372 5mm Orange transparent
1.9V 700 mcd
AB373 5mm Orange water clear
2V 50 mcd
AA380 5mm Red diffused
1.9V 300 mcd
DB255 5mm Red water clear
1.8V 1800 mcd
AD014 5mm Red water clear
2.2V 7000 mcd
AB287 5mm White water clear
3.5V 10000 mcd
AD229 5mm White water clear
3.2V 20000 mcd
AB562 10mm Red water clear
1.77V 2000 - 3000 mcd
ORDER CODE: AC576
Blister pack that contains 5 yellow 5mm
water clear 2800 mcd LEDs: 5 x (AB288).
ORDER CODE: AB726
Blister pack that contains 10 white 5mm
water clear 10000 mcd LEDs: 10 x (AB287).
ORDER CODE: AB746
FLASHING ROUND LEDs
Blister pack that contains 10 red 5mm water
clear 1800 mcd LEDs: 10 x (DB255).
ORDER CODE: AB720
Built in IC chip, flashes LED on
and off.
Flashing Rate: 2.0Hz.
Voltage Range: 2.1 - 9Vdc
DB245 5mm Green Diffused 5.0 mcd
DB244 5mm Red Diffused 20.0 mcd
AA443 5mm Yellow Diffused 20.0 mcd
AA442 5mm Super Red Diffused 100 mcd
Blister pack that contains one white 5mm
water clear 10000 mcd LED: 1 x (AB287).
ORDER CODE: AB719
Blister pack that contains 1 flashing green
5mm diffused 5 mcd LED: 1 x (DB245).
ORDER CODE: AC578
Blister pack that contains 2 blue 5mm water
clear 1500 mcd LEDs: 2 x (HB080).
07.58
angle,
peak radiant intensity for specified current.
HB072
W34F3BT
3mm blue transparent
1.2V 940nm 50°
10mW/Sr: 20mA
LD271
5mm grey transparent
1.3V: 0.1A pulse 950nm 50°
10mW/Sr: 0.1A 20ms pulse
LD274-3
5mm grey transparent
1.3V: 0.1A pulse 950nm 20°
SFH484-2 5mm violet transparent
1.5V: 0.1A pulse 880nm 16°
W53F3BT 5mm blue transparent
1.2V 940nm 20°
20mW/Sr: 20mA
W53F3C
5mm water clear
1.2V 940nm 20°
20mW/Sr: 20mA
L-514EIR1C 5mm water clear
1.3V 940nm 20°
30mW/Sr: 20mA
IE-0530HP 5mm water clear
1.4V: 0.1A 940nm 60°
60mW/Sr: 100mA
AA471
GB464
AC997
EB346
Blister pack that contains 2 flashing red 5mm GB527
diffused 20 mcd LEDs: 2 x (DB244).
ORDER CODE: AC577
EB936
MULTI-COLOUR ROUND LEDs
GB469
5V PANEL MOUNT LEDs
AD055 5mm Green 5V / 14mA
AD056 5mm Red 5V / 12mA
AD057 5mm Yellow 5V / 14mA
12V PANEL MOUNT LEDs
AD058 5mm Green 12V / 15mA
AD059 5mm Red 12V / 11mA
AD060 5mm Yellow 12V / 15mA
PLASTIC LED HOLDER CLIPS
DB577 3mm LED Holder clip
DB576 5mm LED Holder clip
AD228 Rubber 5mm LED Holder
PROMINENT PANEL LEDs
GB508 Concave 5mm LED Holder
A red and green LED integrated
into one package. For the two
Note: Indicated Vf for 15mA LED
terminal version the colour is
determined by the polarity of the current.
Max. current: 20mA
voltage applied to the terminals
of the LED. With the three termiFB790 5mm Red 1.8V metal
nal LED the center pin is the
FB791 5mm Green 2.1 - 2.2V metal
cathode (negative lead) and the
outer pins are the anodes (positive leads) of the red and green
LEDs. Indicated typical forward
voltage Vf for 15mA LED current.
The indicated luminous intensity
Iv (mcd) is typical.
Note: Panel mount LEDs with
black, convecs, plastic housings
and insulated leads. Each has a
mounting nut and requires a
panel hole diameter of 7.8mm.
Available in 5V or 12Vdc.
DB246 5mm Bi-Colour red/green (2 leg)
2.0 / 2.1 V, 20.0 / 15.0 mcd
AD218 3mm Bi-Colour orange/green (3 leg)
1.7 / 1.7 V, 24 / 30 mcd
DB256 5mm Bi-Colour red/green (3 leg)
1.9 / 2.1 V, 20.0 / 15.0 mcd
AA720 5mm Bi-Colour Super red/green
GB683
1.7 / 2.1 V 500 / 150 mcd (3 leg)
GB684
GB685
INFRA-RED LEDs
5V PANEL MOUNT LEDs
5mm Green 5V / 14mA
5mm Red 5V / 12mA
5mm Yellow 5V / 14mA
12V PANEL MOUNT LEDs
GB686 5mm Green 12V / 15mA
GB687 5mm Red 12V / 11mA
GB688 5mm Yellow 12V / 15mA
Note: These IR (Infra-Red) LEDs
emit light that is invisible to the
human eye. IR LEDs are used for
remote control systems and
security sensors.
forward voltage for 20mA current,
peak IR emission wavelength,
half radiant intensity viewing
Note: Panel mount LEDs with
chromed, convecs, plastic housings and insulated leads. Each
has a mounting nut and requires
a panel hole diameter of 7.8mm.
Available in 5V or 12Vdc.
07.59
GB692 Convex 5mm LED Holder
AB393 Metal 5mm LED Holder
SEGMENTED LED DISPLAYS
Note: 7-Segment, single digit,
LED displays.
Colour that LEDs shine
Common connection type
Digit size (height of digit)
Package Dimensions: LxWxH
Forward voltage at 20mA current
Typical brightness at 10mA
AA027 high efficiency red, common anode,
digit size 13.2mm, 17.5x12.4x7mm,
2V, 6.4mcd
AA028 high efficient red, common cathode,
2V, 6.4mcd
HB081 super bright red, common anode,
1.85V, 24mcd
HB082 super bright red, common cathode,
1.85V, 24mcd
AA887 red, common cathode,
digit size 57mm, 69.7x47.7x12mm,
18mcd
AA884 red, common cathode,
digit size 101mm, 122x90x15mm,
44mcd
JB225
10 red segments bar graph array,
1.85V, 31mcd (20 pin DIP)
Supply Voltage : 3Vdc ± 0.2V
Supply Current : 45mA
2.5mW (class IIIa)
Wavelength : 670nm (red)
Dimensions: 23mm lenght x 10.5mm dia.
Beam Ø : 3.2mm
Dot Ø : 2mm at 5m
Leads : 4cm
Weight : 8g
ORDER CODE: FB109
LASER MODULE 3MW 650NM 3V
CLASS IIA
Note: NEVER look into the laser
or shine onto someones face.
LASER MODULE
Features:
Small size
650nm / 3mW
Class IIIa
Specifications:
Supply Voltage : 3Vdc
Dimensions : 39mm lenght x 9mm dia.
ORDER CODE: FB110
KEY CHAIN LASER POINTER
Laser module <3.5mW
Red laser (approximately. 670nm)
Laser Class IIIa
Dimensions: 32mm lenght x 8.1mm dia.
ORDER CODE: FB654
THYRISTORS (SCR)
HB046
GB323
HB047
DB492
AC563
AA559
HB050
AA535
OPTO COUPLERS
Features:
Small size
Small beam divergence
Excellent beam visibility, even at maximum
range (50m indoors, 200m at night)
Specifications:
Blue Fibre Optice Emitter Module
1.8V LED 20mA max.
Black Fiber Optic Detector Module
Photodiode
2N5064
Thyristor 0.8A 200V
(TO92)
CR02AM-8 Thyristor 0.8A 400V
(TO92)
TIC106M
BT148 Thyristor 4A 600V
(TO220)
BT151
SCR 7.5A 600V (TO220)
TIC126M
Thyristor 12A 600V (TO220)
SCF25C60 Thyristor 25A 600V
(TO220F)
2N6509
TYN825 Thyristor 25A 800V
(TO220)
TRIACS
Power Supply: 3 x 1.5V cells LR44 cells
3 x (GB718) (included)
Dimensions: 71mm length x 13.5mm dia.
Weight: 35g
ORDER CODE: GB368
LASER MODULE 2.5MW 670NM
CLASS IIIA
GB250
AA251
LASER MODULE 1MW 660NM 3V
CLASS II
This Laser diode has the following features:
Small size
High reliability
Long life
Specifications:
1mW Class II laser product
Wavelength: 650 - 660nm (red)
Dimensions:
Length: 32.5mm
Diameter: 10.5mm
Leads: 15cm
Weight: 15g
ORDER CODE: FB108
TLP598G
GB251
LASER DIODES
Vce 55V Ic 50mA (DIP16)
Solid State Relay Iout 0.15A
400V peak, Ift 5mA (DIP6)
EB129
JB135
JB066
DB559
AA553
AC582
JB064
HB048
HB049
GB645
AB286
TIC206M
T106M Triac 4A 600V
(TO220)
BT136-600E Sensitive gate Triac 4A
TO220
BT136-600 Triac 4A 600V (TO220)
BT136F-600 Triac 4A 600V Insulated
Tab (TO220)
TIC225M
Triac 8A 600V Sensitive
gate 10mA (TO220)
BT137-600E Triac 8A 600V Sensitive
gate 10mA (TO220)
BTA08-600B Triac 8A 600V (TO220)
BT137-600 Triac 8A 600V (TO220)
BT138-600 Triac 12A 600V (TO220)
BT139-600 Triac 16A 600V (TO220)
STF16A60 Triac 16A 600V (TO220)
BTA140-800 Triac 25A 800V (TO220)
SENSORS
AC565
4N33
EB299
4N35
AC566
6N136
DB452
6N138
DB402
CNY17-3
AC567
CNY74-2
AC568
CNY74-4
AC569
K3020P
AC954
LTV847
DB403
MOC3021
EB350
MOC3041
EB820
PC814
EB819
PC817
FB244
TLP621
AC951
TLP621-4
Optocoupler high gain darlington transistor CTR500%
Optocoupler CTR100%
Optocoupler High Speed
Tp = 800ns CTR15%
LIGHT DEPENDENT RESISTORS
Optocoupler high gain darlington transistor CTR1300%
Optocoupler CTR34%
2 Optocouplers CTR50%
Optoisolator Triac Driver
400V peak, Ift 30mA (DIP6) AB889 LDR 540nm 90mW max.
4 Photocouplers CTR50%
light resistance: 2k - 20k Ohm
dark resistance: > 2M Ohm
3.5 x 4mm sensor, 33mm leads
400V peak, Ift 15mA (DIP6)
GB190 LDR 540nm 90mW max.
Zero-Cross, Ift 15mA (DIP6)
dark resistance: > 200k Ohm
Optocoupler CTR20%
4.3 x 5.1mm sensor, 33mm leads
Optocoupler CTR80%
DB152 LDR 540nm 200mW max.
Optocoupler CTR100%
8 x 9mm sensor, 33mm leads
LIGHT SENSORS
AB891 LDR 560nm 200mW max.
07.60
10.5 x 12mm sensor, 33mm leads
IR RECEIVER MODULES
TEMPERATURE SENSORS
Note: Phototransistor with a
water clear lens
HB073
W32P3C
3mm NPN Phototransistor
water clear lens
spectral sensitivity range:
450 - 1100nm, peak=940nm
angle of half sensitivity: 50°
dark current: 100nA max.
Ic: 0.1mA / Ee = 1mW/cm2
AA473
PT331C
water clear lens
450 - 1100nm, peak=940nm
AA718 IR 940nm Receiver Module
RF Shielded 37.9kHz
AC830 IR 940nm Receiver Module
RF Shielded 56.9kHz
GB526
GB283 IR 940nm Receiver Module
Unshielded 38kHz
AC776 IR 940nm Receiver Module
Unshielded 40kHz
PHOTO TRANSISTORS
AND DIODES
GB229
W53P3C
MAL12
water clear lens
450 - 1100nm, peak=940nm
AC917
TC1047A
convert temp. to voltage
measure: -40°C to +125°C
error: ±1°C
temp. coeff.: +10mV/°C
Vo = 750mV at 25°C
Vs = 2.5 - 5.5V
(SMD 3pin SOT23B)
HB123
LM35DZ
measure: 0°C to +100°C
error: ±0.9°C
Vo = 250mV at 25°C
Vs = 4 - 30V (TO92)
AA071
LM335Z
error if calibrated: ±1°C
must calibrate 2.98V at 25°C
Ir = 400µA - 5mA (TO92)
GB421
DS18B20
temp. to digital 1-wire bus
error: -10 to 85°C: ±0.5°C
error: -55 to 125°C: ±2°C
resolution: 9, 10, 11 or 12-bit
Vs = 3 - 5.5V (TO92)
DS1820
temp. to digital 1-wire bus
error: -10 to 85°C: ±0.5°C
error: -55 to 125°C: ±2°C
resolution: 9-bit
Vs = 3 - 5.5V (TO92)
NPN Photo-darlington
Transistor, water clear lens
650 - 1040nm, peak=900nm
AC848
Ic: 1mA / Ee = 1mW/cm2 if
using white light (2874°K)
3 pin (TO18L)
NTC THERMISTORS
SOUND SENSORS
EB281
BP104F
Rectangular Pin Photodiode
lens with daylight filter
840 - 1080nm, peak=950nm
dark current: 3.8nA / 25°C
Isc: 25µA / Ee = 1mW/cm2
pin spacing: 5.08mm
ULTRASONIC TRANSDUCERS
Ultrasonic Transducer / Sensor Pair
designed for sending and receiving ultrasonic sound waves through the air.
Specifications:
Note: Phototransistor with a lens Resonant Frequency: 40kHz ±1kHz
Range: 0.2 to 6m
that filters out daylight
Direction Angle: 30º
Temperature Range: -20ºC to +85ºC
AA472 SFH309FA 3mm NPN Phototransistor
Dimensions:
body: 12mm x 16.2mm diameter
770 - 1040nm, peak=900nm
leads: 8mm long, 10mm spacing
AC956
SFH203FA 5mm Pin Photodiode
780 - 1040nm, peak=900nm
dark current: 1.3nA / 25°C
Isc: 50µA / Ee = 1mW/cm2
Note: These are temperature
dependant resistors. Each has a
NTC (negative temp. coefficient),
which means that its resistance
will decrease with an increase in
temperature. Suitable for temperature measurement and control.
Disk diameter: 5mm
Maximum Temperature: 125ºC
The internal resistance indicated
below is measured at 25ºC.
TRANSMITTER:
Input Voltage: 20Vrms max.
Identified by letter ‘T’ on black at the leads
ORDER CODE: AB201
RECEIVER:
Sensitivity: -65dB
RF shielded around the sides and the back
ORDER CODE: AB200
07.61
AC570
AD103
AC572
AA050
AD104
DB171
100E
200E
500E
1k
2k
5k
DB172
AD105
DB173
DB174
AC571
10k
20k
50k
100k
150k
STUD MOUNT NTC THERMISTORS
Note: These stud mount thermistors can easily be mounted. It
has a lower thermal resistance
than the enamel coated type.
Suitable for faster temperature
measurements. Type K45.
Each has a M3 nut and bolt.
Bolt length is 7mm.
The internal resistance indicated
below is measured at 25ºC.
AD013 6.8k
DISPLAYS
NUMERICAL DISPLAYS 10pcs
Features:
Number of dots (pixels): 128 x 64
Duty: 1/64
Bias: 1/9
Type: positive
Specifications:
LCD type + colour: STN yellow-green
Supply Voltage for LCD driver (Vdd-Vo):
at 0°C: 10.2V typ.
at 25°C: 9.4V typ.
at 50°C: 9.1V typ.
Supply Voltage for logic (Vdd-Vss):
at 25°C: 5.0V typ.
Temperature Range: 0°C to +50°C
Storage Temperature: -20°C to +60°C
Overall Dimensions: 93 x 70mm
Viewing Area: 72 x 40mm
Dot Size: 0.48 x 0.48mm
Dot Pitch: 0.52 x 0.52mm
Pin assignment:
power supply (GND): 1 (Vss)
power supply (+5V): 2 (Vdd)
power supply for LCD driver: 3 (Vo)
data / instruction: 4 (D/I)
data read / write: 5 (R/W)
enable signal: 6 (E)
data bus lines: 7-14 (DB0 - DB7)
chip selection: 15 (CS1)
chip selection: 16 (CS2)
cup or external CR: 17 (RST)
negative voltage: 18 (Vout)
ORDER CODE: AB023
PLAIN LCD
AB654
A mixed pack that contains 10 numerical displays. Contains LED and LCD types.
ORDER CODE: AB654
LCD WITH DRIVER
GB154 LCD 3 1/2 Digit (VI-302-DP-RC)
GB268 LCD 4 1/2 Digit (VI-509-DP-RC)
RADIO AND TV
Note: Each LCD (liquid crystal
display) contains a built-in driver
IC and can be interfaced to a
microprocessor or computer.
Power supply: 5Vdc.
RF TRANSMITTER/
RECEIVER MODULES
TRANSMITTER MODULE TX433N
MB086 LCD & driver 16 Characters x 1 line
8/4 bit interface
MB087 LCD & driver 16 Characters x 2 line
8/4 bit interface
AD101 LCD & driver 16 Characters x 2 line
8/4 bit interface with LED backlight
2: Data Input
3: Vcc (positive supply rail 12Vdc max.)
4: Antenna Output
Supply Current: 45mA / 12Vdc
Carrier Frequency: 433.92MHz
SAW Resonator
Digital Date Rate: max. 8 kbits per sec.
Digital Signal Modulation: 50% duty-cycle,
on-off keying/ASK (amplitude shift keying)
RF Output Power: 10mW
Antenna: can be connected (not included)
ORDER CODE: AB341
RECEIVER MODULE RX433
AB342
This is a compact AM radio receiver module
with SMD components. It is suitable for
remote controls and telemetry, single direction (simplex). No adjustments are required.
This device also works with (AB341).
Specifications:
Pin Numbers:
2: Digital Output
3: Analogue Output
8: Antenna Input
Supply Current: 4.5mA
High Sensitivity LC Passive Design
Range: max. 200m in the open air
Digital Data Rate: max. 4.8 kbits per sec.
Demodulation:
AM and also ASK (amplitude shift keying)
Receiver Turn-on Time: 3msec. max.
1 digital output and 1 analogue output
RF Input Sensitivity: -106dBm, (3µVrms)
Antenna: can be connected (not included)
or just use wire 30 - 35cm long
Dimensions: 43.5 x 11.5 x 9.5mm
ORDER CODE: AB342
FM RADIO TRANSMITTER MODULE
FOR AUDIO SIGNALS
GRAPHICAL LCD MODULE
AB341
This is a graphic supertwist LCD module
with no backlight.
This is a compact AM radio transmitter module with SMD components. It is suitable for
remote controls and telemetry over a distance of up to 15m, single direction (simplex). No adjustments are required. It has a
stable output carrier frequency. This device
works with (AB342).
Specifications:
Pin Numbers:
07.62
AB612
This is a compact FM radio transmitter module. It makes use of thick-film, hybrid circuit
technology and SMD components. It is suit-
able for high quality audio radio transmission, radio telemetry of analogue signals and
radio remote control (DTMF) systems.
This module has an on / off power switch. It
has two separate audio frequency, voltage
amplifiers: AMP1 and AMP2. An external
pre-emphasis filter network can be connected between the output of AMP1 and the
input of AMP2. The centre frequency of the
output radio carrier wave is determined by a
SAW resonator. The frequency is modulated
by means of a varicap diode. A 50 Ohm
antenna should be connected at the output
of the matching network. No adjustments are
required. It can only transmit and therefore it
operates in a simplex mode. This module
works together with the FM radio receiver
module (AB611).
Specifications:
Carrier Centre Frequency (fc): 433.8MHz
Frequency Modulation Range: fc±75kHz
Audio Signal Frequency Bandwidth:
20Hz - 30kHz
Digital Date Rate: 10kHz max. 50% dutycycle ASK (amplitude shift keying)
Transmitter Turn-on Time: 100µsec. max.
Turn-on Voltage Range: 5 - 12V
Turn-off Voltage Range: 0 - 0.5V
AMP Input Impedance: 10 kOhm
AMP1 Input Voltage Range: 0 - 100mVpp
AMP1 Voltage Gain: 20
AMP2 Input Voltage Range: 0 - 2Vpp
2Vpp for maximum frequency modulation
AMP2 Voltage Gain: 5
RF Output Impedance: 50 Ohm
RF Output Power: +10dBm max.
(into a 50 Ohm load)
Antenna: 50 Ohm at 433.8MHz
can be connected (not included)
ORDER CODE: AB612
FM RADIO RECEIVER MODULE
FOR AUDIO SIGNALS
transmitter module (AB612).
Specifications:
Carrier Centre Frequency (fc): 433.8MHz
Reception Frequency Range: fc±75kHz
RF Input Impedance: 50 Ohm
Antenna: 50 Ohm at 433.8MHz
can be connected (not included)
RF Input Sensitivity: -100dBm
Audio Signal Frequency Bandwidth:
20Hz - 20kHz
Audio Output Impedance: 1.5k Ohm
Audio Output Voltage Range:
1.2V DC-offset + 0 - 100mV audio signal
100mV for maximum frequency modulation
Squelch Level Range: (externally adjustable)
sensitivity: -50dBm min. to -100dBm max.
Squelch Output Current: 100mA max.
20k Ohm Preset potentiometer for adjusting
the squelch level: (DB707)
ORDER CODE: AB611
audio signals into UHF television signals.
The modulator uses the PAL-system G.
Connections:
Pin Numbers:
1: Video Input
2: Audio Input
3: Vcc (positive supply rail 5Vdc)
5:Vcc (positive supply rail 5Vdc)
RF Output: PAL Plug (male) at top right
Antenna Input: PAL Socket at bottom right
Channnel Selector: screw at top left
Specifications:
System: PAL-G
Preset channel: CH36
Adjustable Channel Range: CH28 - CH41
Built-in test signal B/W pattern generator
ORDER CODE: AB416
UHF TV CHANNEL 22
AUDIO/VIDEO MODULATOR
ANTENNA TO TX/RX
SELECTOR SWITCH MODULE
This is a fast electronic antenna switch
SPDT module. No mechanical contacts. It
connects 1 antenna to either 1 transmit or 1
receive signal line used in Tx-Rx systems.
Specifications:
Working Frequency: 433.92MHz
RF Bandwidth: 20MHz
Switching Time: < 100µsec.
Input/Output Impedance: 50 Ohm
Switchable RF Power: 20dBm max.
Insertion Loss:
Receiving (Ant-Rx): ~ 0.5 dB
Transmitting (Tx-Ant): ~ 1.1 dB
Supply Current:
Receiving: (zero current consumption)
with 0V control signal voltage
Transmitting: ~ 10mA
with 5Vdc control signal voltage
Dimensions: 20.5 x 14.6 x 3mm
ORDER CODE: AB156
Low-cost CATV circuit for transmitting highquality audio/video signals in the UHF band.
Input signals can be fed from video cameras,
tuners, video tape players, etc... Makes
direct use of the signal lines of a standardised output connectors (i.e. SCART). A standard TV receiver receives this output RF signal.
Specifications:
RF Output Power: 2mW (75 Ohm load)
Dimensions: 29.5 x 25.5 x 8mm
ORDER CODE: AB026
UHF TV CHANNEL 22
CATV AMPLIFIER
RF MODULATOR MODULE (RFMOD)
AB611
This is a compact, FM, super-heterodyne
radio receiver module. It makes use of thickfilm, hybrid circuit technology and SMD components.
A single mixer stage is used in the FM
demodulation process. The local oscillator,
which is used for mixing, is built around a
SAW resonator. A squelch output is available
for switching on any external audio amplifier
whenever the received signal power is larger
than the squelch level. The squelch threshold level is externally adjustable. It is possible to connect a de-emphasis filter network
at the audio output. No on-board adjustments are required. It can only receive and
therefore it operates in a simplex mode. This
This is a compact RF modulator module. It
module works together with the FM radio
converts PAL composite video and line-level
07.63
Linear CATV circuit for high quality audio /
video signal amplification, operating on the
UHF TV Channel 22. The RF input signal
can be derived from an audio/video modulator (AB026). Its amplified RF output can be
received with any standard TV receiver.
Specifications:
Working Frequency: 479.5MHz
RF Output Power: 19dBm (75 Ohm load)
Dimensions: 38.2 x 22 x 4.2mm
ORDER CODE: AB027
12VDC/60MA POWER SUPPLY
FOR TV AMPLIFIER 230VAC
RADIO FM AERIAL 5 ELEMENTS
TV AMPLIFIERS
TV MASTHEAD AMPLIFIERS
Forward Gain: 8.5 dB
Front to Back Ratio: 22 dB
TV masthead amplifiers are used to amplify Horizontal Beam Width: 58º
weak TV signals coming directly from the TV Dimensions:
1720mm long, 1610mm wide, 900mm height
antenna. This power supply powers the TV
ORDER CODE: AB025
masthead amplifier and also provides a TV
signal path between the amplifier and TV
TV VHF AERIAL 13 ELEMENTS
set. This power supply is powered by
230VAC. It supplies a maximum current of
60mA at 12VDC and exhibits a signal loss of
approximately 1 dB.
ORDER CODE: FB485
Note: TV masthead amplifiers are
used to boost weak TV signals
from the aerial. Most amplifiers
have separate VHF and UHF
inputs for each aerial and one
combined output that goes to the
power supply. The output coaxial
cable from the amplifier carries
the TV signals as well as 12V DC
ANTENNAS
power for the amplifier. Amplifier
gain for each aerial can be varied
Note: Antennas that are mounted
with the adjustment screws.
externally on a mast. Supplied
with mast mounting clamp that
GB563 TV Masthead Amp.
25dBVHF/25dBUHF 12V/55mA
can be mounted for vertical or
GB562 TV Masthead Amp.
horizontal polarization.
Lightweight aluminium construcGB561 TV Masthead Amp.
tion. UV and corrosion protected.
High antenna gain is good for
12VDC/120MA POWER SUPPLY
receiving weak radio signals.
FOR TV AMPLIFIER 230VAC
High front to back Ratio is good
for minimising signal ghosting.
Beam width is an indication of
the antenna’s directivity.
Directivity is good for long-distance reception only when the
antenna is directed exactly
towards the transmitting, (radio
station), antenna.
Forward Gain: 9 - 12 dB
Horizontal Beam Width: 44º
Dimensions:
3000mm long, 850mm wide, 500mm height
ORDER CODE: AB369
RELAYS
RELAYS 5pcs
RADIO FM AERIAL 3 ELEMENTS
TV masthead amplifiers are used to amplify
weak TV signals coming directly from the TV
antenna. This power supply powers the TV
masthead amplifier and also provides a TV
signal path between the amplifier and TV
set. This power supply is powered by
230VAC. It supplies a maximum current of
120mA at 12VDC and exhibits a signal loss
of approximately 1 dB.
ORDER CODE: FB486
AB645
A mixed pack that contains 5 relays.
ORDER CODE: AB645
REED RELAYS
Forward Gain: 5 dB
Horizontal Beam Width: 70º
Dimensions:
1190mm long x 1610mm wide
ORDER CODE: AB024
07.64
Note: These epoxy moulded reed
relays are ideal in circuits requiring high density packing. Meant
for low current, dry contact
switching with minimum switch
bounce.
GB284 Mini Relay 12V, 950 Ohm Coil
1A Contacts SPDT
7.5 x 12.5mm, 10mm height
EB143 Reed Relay 5V / 500 Ohm Coil
0.5A Contacts SPST
8 contacts fits a 0.3 inch (DIP14)
AC901 Reed Relay 12V / 1k Ohm Coil
0.5A Contacts SPST
AC897 Relay 12V, 270 Ohm Coil
10A Contacts, SPDT
AD051 Mini Relay 6V, 90 Ohm Coil
1.5A Contacts SPDT
10.5 x 16mm, 12.5mm height
AD156 Mini Automotive Relay 12V Coil
20A Contacts SPDT
1.5A Contacts SPDT
AD124 Automotive Relay without a casing
12V, 88 Ohm Coil
12V 30A Contacts SPDT
AC902 Reed Relay 5V / 200 Ohm Coil
0.5A Contacts SPDT
AC903 Reed Relay 12V / 500 Ohm Coil
0.5A Contacts SPDT
PCB MOUNT RELAYS
1.5A Contacts SPDT
16 x 19.5mm, 16mm height
GB497 Automotive Relay 12V, 80 Ohm Coil
21 x 26.5mm, 21.5mm height
DB404 Relay 5V, 75 Ohm Coil
JB050
Relay 12V, 320 Ohm Coil
1A Contacts DPDT (DIL) 0.3 inch
10 x 20.5mm, 12mm height
1.2A Contacts DPDT (DIL) 0.3 inch
GB184 Relay 12V, 360 Ohm Coil
8A Contacts, DPDT (DIL)
AD149 Relay 5V, 61 Ohm Coil
8A Contacts, DPDT (DIL)
Blister pack that contains one PCB mount
12V coil relay 10A (SPDT): 1 x (DB003).
ORDER CODE: AB740
07.65
16A Contacts, SPDT (DIL)
PLUG-IN RELAYS
AC900 PCB Mount Socket / Base
for Plug-in Relay
240V 5A Contacts, SPDT
SWITCHES
TACTILE / KEYBOARD
SWITCHES
1.2A Contacts DPDT (DIL) 0.3 inch
10.5 x 21.5mm, 12.5mm height
GB666 Automotive Relay 12V, 80 Ohm Coil
12V 30A Contacts, SPST
Dimensions:
Base: 26.5 x 28.5mm
Height: 25mm without the tag
41mm with the 16mm tag included
GB189 Miniature Tactile PCB Switch,
3.6x6mm base, 5mm height
10A Contacts, SPDT
16A Contacts, SPDT (DIL)
Note: PCB, through-hole mounted, press to make click action
switches (Tactile). These switches are all single pole, that is only
1 switch contact is made when
pressed. Height is measured
from the base of the switch to
the knob tip.
AD239 Automotive Relay 12V, 92 Ohm Coil
12V 30A Contacts, SPDT
Dimensions:
Base: 26.5 x 28.5mm
Height: 25mm without the tag
41mm with the 16mm tag included
DB397
DB398
DB396
DB399
GB149
4.3mm height, 6x6mm base
5mm height, 6x6mm base
5.5mm height, 6x6mm base
GB706 Wide, Flat, PCB, Tactile Switch,
operating force: 160g (1.56N),
12 x 12mm base, 4.3mm height
AA202 Mains Relay 230Vac, 26k Ohm Coil
250V 8A Contacts, DPDT (DIL)
AC899 In-line Socket for Plug-in Relay,
with 60cm wires
AC817 Wide, PCB, Tactile Switch with stem
that is square and can take a cap,
operating force: 160g (1.56N),
12 x 12mm base, 7.3mm height
07.66
Note: Square Switch Caps that fit
on top of tactile switch (AC817).
Cap Dimensions: 12 x 12 x 4mm
AC813
AC814
AC815
AC816
Note: 8-Sided panel mount pushbutton switches. Maximum 3A /
250V
Black
Blue
Red
Ivory
GB725 push to make, NO, M12, red
FB493 latching, M12, red
FB724 90° Tactile PCB Switch, 6x6mm,
8.3mm from leads to knob tip
AB471 Key Pad 12 Keys, 3x4 (x-y)
separate switch outputs
fits key pad enclosure (AA044)
Note: Square panel mount pushbutton switches. Maximum 3A /
250V
GB724 push to make, NO, M12, black
JB213 latching, M12, black
GB159 Tactile Keyboard PCB Switch,
12x12mm red square, 11mm height
Note: Round panel mount pushbutton switches. Maximum 3A /
250V
AC896 Tactile Keyboard PCB Switch,
12x12mm red round, 11mm height
KEYPADS
Note: Key pads for limited data
entry. Mounted from the front or
rear. Dustproof construction.
Gold-plated contacts, low current
switching max. 20mA / 24V, contact resistance less than 200
Ohms.
EB428 Hex Keypad 16 Keys (4x4)
matrix switch connection outputs
GB723 push to make, NO, M12, black
JB212 latching, M12, black
PUSH-BUTTON SWITCHES
SWITCHES AND KEY BUTTONS
20 PIECES
GB665 Panel Push to Make NO Switch
black, 4-sided knob, M10, 1A
FB819 Panel Push-Button Switch, SPDT
NO / NC contacts, M6.3, 2A
A mixed pack that contains 20 switches.
ORDER CODE: AB638
AB470 Switch Cap for (FB819), black
GB178 Key Pad 12 Keys, 3x4 (x-y)
matrix switch connection outputs
fits key pad enclosure (AA044)
AA686 Panel push to break NC Switch,
red round knob, M6.9, 0.5A
AD233 Panel push to make NO Switch
nickel plated brass, 5A / 250V, M19
07.67
PIN SWITCH 7 X 65MM
HB209 Panel push to make NO Switch,
red round knob, M6.9, 0.5A
AB002 Panel push to make NO Switch,
black round knob, M6.9, 0.5A
AB289 Panel push to make NO Switch,
white round knob, M6.9, 0.5A
Panel mount pin switch with adjustable pin
protrusion distance.
It is open-circuit when pushed.
Single NC (normally closed) contact
Dimensions :
panel hole 7mm diameter
pin lenght 20mm
tip-to-tip length 65mm
ORDER CODE: FB091
SHORT PIN SWITCH 8 X 49MM
Blister pack that contains 2 red, push to
make, NO switches: 2 x (HB209).
ORDER CODE: AB742
Short pin, panel mount pin switch.
It is open-circuit when pushed.
Single NC (normally closed) contact.
Dimensions :
panel hole 8mm diameter
pin lenght 11mm
tip-to-tip length 49mm
ORDER CODE: FB092
Blister pack that contains one micro switch
with 54mm lever 6A / 250Vac: 1 x (EB188).
ORDER CODE: AB737
AB261 Micro switch with 26mm lever and
4.8mm diameter roller
12A / 125Vac and 6A / 250Vac
com, n/o and n/c pins (SPDT)
ROCKER SWITCHES
MICRO SWITCHES
AA640 Micro switch no lever
5A / 250V (SPST)
Blister pack that contains 2 black, push to
make, NO switches: 2 x (AB002).
ORDER CODE: AB743
AA628 Panel Rocker Switch, 1P on-on,
(SPDT), 21x13x19mm, black, 3A
AA669 Micro switch no lever
5A / 125Vac and 3A / 250Vac
AD011 Panel Rocker Switch, 2P on-on,
(DPDT), 34x25x26mm, black, 10A
EB528 Micro switch with 37mm lever
5A / 125Vac and 3A / 250Vac
GB246 90° PCB Push-Button Switch,
DPDT, 7.4x9x14.6mm, 0.1A
GB247 Knob for Switch (GB246)
FB823 90° PCB push to make Switch,
6x8.2x10mm, 0.5A
AD012 Panel Rocker Switch, 2P on-off-on,
(DPDT), 34x25x26mm, black, 10A
EB188 Micro switch with 54mm lever
12A / 125Vac and 6A / 250Vac
EB183 Surface Switch, SPST,
18x45x60mm, white, M3.5, 6A
TOGGLE SWITCHES
Note: Switching notation for tog-
07.68
gle switches:
On-On: only 2 possible positions
On-(On): 2 positions with a
spring forcing the lever to one
side
On-Off-On: 3 possible positions
with all contact pins disconnected when the lever is in the centre
position
(On)-Off-(On): 3 possible positions with all contact pins disconnected when the lever is in
the centre position and the lever
is forced to the centre position
by springs
(DPDT), 2A
FB798 Panel mini, 1P on-on,
(SPDT) 13.2x5.1x8.2mm,
M5, 1.5A
FB803 Panel mini, 2P on-on,
(DPDT) 12.7x8.3x9.2mm,
M5, 1.5A
SPST: 1pole (single pole), 1xway
(single throw)
SPDT / 1PDT: 1pole, 2xway (double throw)
DPDT / 2PDT: 2pole (double
pole), 2xway
Note: 2 pole, panel mount, toggle
switch
FB809 (on)-off-(on), 13x11.5x12.8mm,
(DPDT) M6.3, 2A
FB808 on-(on), 13x11.6x12.7mm,
(DPDT) M6.3, 2A
FB810 on-off-(on), 13x11.5x12.7mm,
(DPDT) M6.3, 2A
FB801 on-off-on, 13x11.5x12.7mm,
(DPDT) M6.3, 2A
DB252 on-on, 13x11.5x12.8mm,
(DPDT) M6.3, 2A
switch
FB811
FB820 90° PCB mini Toggle, 1P on-on,
(SPDT), 1.5A
FB813
Blister pack that contains one mini panel
mount (SPDT) toggle switch: 1 x (FB798).
ORDER CODE: AB725
FB799
FB800
FB812
FB817 90° PCB Toggle, 1P on-off-on,
(SPDT), 2A
on-(on), 14.5x12.7x16.6mm,
(3PDT) M6.3, 2A
on-off-(on), 14.6x12.8x16.7mm,
(3PDT) M6.3, 2A
on-off-on, 15.5x12.8x16.9mm,
(3PDT) M6.3, 2A
on-on, 14.7x12.8x16.6mm,
(3PDT) M6.3, 2A
(on)-off-(on), 14.6x12.9x16.7mm,
(3PDT) M6.3, 2A
switch
FB821 90° PCB/Panel Toggle, 1P on-on,
(SPDT), 1.5A
FB806 (on)-off-(on), 13x7x12.8mm,
(SPDT) M6.3, 2A
FB805 on-(on), 13x6.9x12.8mm,
(SPDT) M6.3, 2A
FB807 on-off-(on), 13x6.9x12.8mm,
(SPDT) M6.3, 2A
AA379 on-off-on, 13x7x12.8mm,
(SPDT) M6.3, 2A
DB017 on-on, 13.3x8x13mm,
(SPDT) M6.3, 2A
switch
FB815 (on)-off-(on),14.5x12.7x22mm,
(4PDT) M6.3, 2A
FB804 on-off-on, 15x12.8x21.9mm,
(4PDT) M6.3, 2A
AA576 on-on, 15.2x13.1x23mm,
(4PDT) M6.3, 2A
FB822 90° PCB mini, 2P on-on,
(DPDT), 1.5A
EB184 Panel Toggle, 1 pole, (SPST),
20.3x14x25mm, M11.9, 2A
FB824 90° PCB Toggle, 1P on-on,
(SPDT), 2A
(DPDT), 2A
Blister pack that contains one panel mount
(SPDT) toggle switch: 1 x (DB017).
ORDER CODE: AB739
07.69
AD107 Panel Toggle, 1 pole, on-on,
(SPDT) 33x20x29mm,
M12.2, 10A / 250Vac
EB187 Panel Toggle, 1 pole, on-off-on,
(SPDT) 33x20x29mm,
M12.2, 10A / 250Vac
ROTARY ENCODERS
HB313 2 pole 6 positions
HB312 1 pole 12 position
KEY SWITCHES
KEY SWITCH IN BOX
EB186 Panel Toggle, 2 pole, on-off-on,
(DPDT) 27x19.7x32.5mm,
M11.8, 10A / 250Vac
SLIDE SWITCHES
DB304 Panel Slide Switch, (DPDT),
11.7x7.3x13.2mm, M2, 0.1A
This switch encodes the turning direction
and incremental rotation of its axis.
Specifications:
24 pulses / rotation
output phase difference angle:
2 signals 54°±30° phase difference
rotation angle: 360°
rotational life: 100 000 rotations
ORDER CODE: GB483
BCD-SWITCH
Change-over key switch fitted in attractive
weather proof housing for outdoor use.
Tamper protected. 3 Keys are provided that
can be removed in both positions. Key
switch is off-set in housing for easy operation. Contains 1 fitted LED.
ORDER CODE: PB041
KEY SWITCH SPRING LOADED
EB229 PCB Slide Switch, (4PDT),
12x9.5x29mm, M2.5, 0.1A
Spring loaded normally open Key Switch
with 2 round keys provided. The key can be
removed in only one position. Ideal for burglar alarms and security systems. The switch
has two solder bucket terminals at the rear.
Fixing nut included.
Bezel diameter: 20mm
Panel cutout: 19mm diameter, 17mm across
with flat sides (provided to prevent twisting).
Bush length: 38mm
ORDER CODE: AA932
EB228 PCB Slide Switch, (DP3T),
11.5x9x25mm, M2.5, 0.1A
GB169 PCB Slide Switch, (DPDT),
5x7x8.7mm, 0.05A
GB156 PCB Slide Switch, (SPDT),
5x4.5x8.7mm, 0.05A
GB338 90° PCB Slide Switch, (DPDT),
5x7x9mm, 0.05A
DB303 90° PCB Slide Switch, (SPDT),
6x5x12mm, 0.1A
DIP SLIDE SWITCHES
This is a PCB mountable, rotary switch that
has BCD (binary coded decimal) output pins. GB680 Panel Key Switch, DPST, roundThe switch encodes the numeric value indikey, removable in both positions
cated by the adjustable pointer in the centre.
M19, 2A
Specifications:
Number of Positions Selectable: 10
Encoded Decimal Values:
0, 1, 2, 3, 4, 5, 6, 7, 8, 9
Output Pins:
4 pins to represent the binary code and
2 common pins
Contact Rating: 100mA / 5Vdc
AA200 Panel Key Switch, SPST, roundRotation Angle: 360°
key, removable in both positions
Operating Temperature: -10°C to +80°C
M12, 0.5A
ORDER CODE: AD080
KEY SWITCH 1 POLE ON-OFF
ROTARY SWITCHES
DB680
DB681
DB682
DB683
2
3
4
5
way
way
way
way
DB684
DB685
DB686
DB687
6 way
8 way
10 way
12 way
07.70
Double bitted flat key switch (SPST). It has 2
keys and 2 solder bucket terminals. Only 2
positions are possible: on or off (not spring
PERMANENT MAGNETS
loaded). The key can be removed in both
positions. It has a dust shutter that keeps
dust out and makes lock picking difficult. It is
ideal for burglar alarms and security systems.
Specifications:
switch: 1P on-off (SPST)
DB001 Cylindrical Permanent Magnet
Contact Rating: 2A / 250VAC
shiny metallic AINiCo
max. Panel Thickness: 19mm
5mm diameter, 16mm length
Mounting Hole Diameter: 19mm
a fixing nut and 2 keys are included
key can be pulled in both positions
dustproof
150 combinations available
ORDER CODE: HB016
AC832 Cylindrical Permanent Magnet
dull black ferrite
JB052
Panel Key Switch, DPST, flat-key,
removable in both positions
M19, 2A
AD246 Bar Shaped Permanent Magnet
shiny metallic Nickel-plated
Neodymium-Iron-Boron compound
50x20x8mm
LOUDSPEAKERS
AND SOUND
PIEZO TRANSDUCERS
Note: A Piezo Transdusers consists of a ceramic piezo-element
that is glued to a metal vibration
plate. It needs an externally driven oscillating voltage to sound.
Low current drain.
TILT SWITCHES
AC833 Cylindrical Permanent Magnet
dull black ferrite
AB415 PCB Mount Roller Ball Tilt Switch
Rating: 24Vdc / 25mA, 10 Ohm
GB158
DB747 Roller Ball Tilt Switch with metal
housing, 18mm long x 5.5mm dia.
29mm leads, (SPST), 100mA
AC831 Bar Shaped Permanent Magnet
dull black ferrite
50 x 19 x 5mm
PCB mount Piezo Transducer with 2 pins.
Resonant frequency is 2.048kHz. Voltage
range: 1-20Vac / 1mA. Sound pressure:
80dBA / 10cm . Diameter: 13.8mm, height:
7mm, pin spacing: 7.6mm. (needs driver)
ORDER CODE: GB158
TIME SWITCHES
MECHANICAL DAILY TIME SWITCH
(24HRS)
dull black ferrite
45x20x10mm
Piezo Transducer with leads. Resonant frequency is 4.5kHz. Voltage: 3-28Vac, rated
5Vac / 1.5mA. 90dB Sound pressure. Round
part: 30mm dia., 5.5mm height, 35mm
spaced mounting holes. (needs driver)
ORDER CODE: JB037
BUZZERS
The time switch is ideal to use for household
appliances that need to be switched on and
off daily for a set period of time. The timer
works directly from 230VAC.
shiny metallic Nickel-plated
ORDER CODE: EB213
Neodymium-Iron-Boron compound
20x10x5mm
REED SWITCHES
EB141 15x2mm glass body, 0.5A 200V
0.15 Ohm contact resistance (no)
07.71
Specifications:
Supply voltage: 3-6Vdc
Rated Voltage: 5Vdc
Round Part: 12mm dia., 7.5mm height
Pin Spacing: 7.6mm
PCB Mount
ORDER CODE: GB176
cable length: 1.2m
max. power input: 100mW
ORDER CODE: HB208
STEREO IN-EAR PHONES
Specifications:
Rated Voltage: 12Vdc
Pin Spacing: 7.6mm
PCB Mount
ORDER CODE: AD018
JB035
Blister pack that contains one 4 - 15Vdc
solid state buzzer with pins: 1 x (JB036).
ORDER CODE: AB724
Solid State Buzzer with leads
3-7Vdc 20mA,
33x16mm, 15mm height
Features:
Comes with: 3.5mm/6.35mm adapter and 2
foam pads
Specifications:
Transducer type: dynamic
Frequency Response : 20 - 20000Hz
Impedance: 32 Ohm
Maximum Power: 50mW
Sensitivity : 102dB
Weight: 5g
ORDER CODE: GB742
STEREO HEADPHONE SET
Specifications:
Supply Voltage : 3-16Vdc
Rated Voltage : 12Vdc
Sound Pressure : 85dB
Dimensions: 23.4mm dia., 18mm height
PCB Mount
ORDER CODE: FB246
PENETRATING TONE BUZZER
Blister pack that contains one 3 - 7Vdc solid
state buzzer with leads: 1 x (JB035).
ORDER CODE: AB723
Specifications:
Spacing of Holes: 34mm
Pin Spacing: 14mm
PCB Mount
ORDER CODE: JB036
Specifications:
Dimensions: 45mm dia., 26mm height
PCB Mount
ORDER CODE: GB682
HEADPHONES
Specifications:
Impedance: 32 ± 4 Ohm
Sensitivity: 101dB ± 3%
Maximum Output Power: 30mW
Magnets: anisotropic
Cable Length: 1.2m with 3.5mm L-plug
Weight: 56g
ORDER CODE: AB417
MULTIMEDIA STEREO
HEADSET AND MICROPHONE
SINGLE EARCUP HEADPHONE
Features:
Ø 27mm drive unit
Specifications:
drive unit: Ø 27mm mylar speaker with an
isotropic ferrite magnet
frequency response: 20 - 18000Hz
impedance: 32 ohm
sensitivity: 101dB
3.5mm nickel-plated plug
07.72
Features:
Professional design
For multimedia applications
Headphones with Microphone
Specifications:
Headphones:
Drive Unit: 30mm diameter mylar cone
Impedance: 30 Ohm
Sensitivity: 106dB
Maximum Output Power: 100mW
Cable of 1.8m with 3.5mm plug at the end
PIEZOELECTRIC TWEETER
WITH FLARE
GB507 Unidirectional Dynamic
Microphone
Microphone:
Supply Voltage: 1.5V to 12V
Supply Current: 0.8mA
Electret Condenser Type: 10mm diameter
Directivity: omnidirectional
Sensitivity: -58 ± 3dB
Output Impedance: low
Cable of 1.5m with 3.5mm plug at the end
ORDER CODE: AB420
SPEAKERS
MINIATURE SPEAKER
SPEAKERS
IN ENCLOSURES
MICROPHONES
HB273 Microphone Electret Condenser
10mm diameter (please connect
the two negative leads together)
This is a piezoelectric tweeter that has a rectangular flare. It has a built-in piezo transducer with an aluminium spherical cap
mounted onto it. It is ideal for reproducing
sound of higher frequencies.
Specifications:
Frequency Range: 2.5 - 45kHz
Maximum Input Voltage: 20Vp-p
Spacing of Hole Centres:
54 x 130mm, 5.5mm dia.
Dimensions: 65 x 145mm, 40mm deep
ORDER CODE: GB784
This is a miniature loudspeaker that can be
used inside office equipment, telephones,
music boxes etc.
Specifications:
Impedance: 8 Ohm
Power Rating: 150mW maximum
Frequency Range: 670 - 3000Hz
(at 1kHz / 100mW, at 10cm from speaker)
Dimensions: 29mm diameter, 7mm thick
Weight: 8.2g
ORDER CODE: AA724
MB056
GB820
PB244
GB821
GB822
8
8
8
8
8
Ohm
Ohm
Ohm
Ohm
Ohm
0.5W round, 50mm diameter
1W round, 57mm diameter
ULTRASONIC LOUDSPEAKER
MODULE
This ultrasonic loudspeaker module can be
used together with any ultrasonic signal generator like (GB779) and (GB806). It contains
a LED that only lights up when the loudspeaker is fed with ultrasonic sounds. It can
be mounted outside provided that it is protected from direct rain (e.g. below a roof). It
has 2 mounting flanges for wall fastening.
ORDER CODE: GB773
PROFESSIONAL SPEAKER
CABINET 2-WAY 200WRMS
MINI-PIEZOELECTRIC TWEETER
Blister pack that contains one electret condenser microphone 10mm dia.: 1 x (HB273).
ORDER CODE: AB744
AA717 Suction Cup
This is a mini-piezoelectric tweeter. It consists of a piezo transducer with an aluminium
spherical cap mounted onto it. The tweeter
has a flanged open frame mounting. It is
ideal for reproducing sound of higher frequencies.
Specifications:
Frequency Range: 2.5 - 45kHz
Maximum Input Voltage: 20Vp-p
Spacing of Holes: 37.5mm
Round Part: 30mm diameter, 14mm height
ORDER CODE: AA526
07.73
Features:
robust, suited for all PA applications
very cost-effective
metal protection grille and metal corner
guard
professional 4-pins speaker connector or
6.35mm jack
incorporated plastic handles and metal support for loudspeaker stand (Ø 35mm)
Specifications:
Woofer Size: 254mm (10 inch)
Tweeter Size: 102 x 254mm (4 x 10 inch)
Power: 200Wrms, 400W max.
Impedance: 8 Ohm
Sensitivity: 90dB
Frequency Response: 30Hz – 20kHz
Magnet Weights:
Woofer: 850g
Tweeter: 283g
Weight: 16kg
ORDER CODE: GB359
Weight: 14.5kg
ORDER CODE: AC996
MOTORS
SPEAKER ACCESSORIES
DC PERMANENT MAGNET
MOTORS
2- WAY CROSS-OVER
120 WATT 8 OHM MODULE
MINI MOTOR 0.5 TO 3VDC
It can be used with 2V solar cell (FB118)
Dimensions:
27mm length (excluding the shaft)
16mm width x 12mm height
Shaft: 1.4mm diameter x 9.5mm length
ORDER CODE: GB571
This 2-way cross-over network can be used
MOTOR 1.5 TO 3VDC 10 000RPM
inside speaker cabinets to connect 4 - 8 ohm
loudspeakers. For 1 bass speaker and 1
midrange.
Specifications:
Output Power: max. 120 W
Separating Frequency: approx. 3kHz/12dB
Loudspeaker Impedance: 4 - 8 Ohm
(without mounting flanges)
3 pole, permanent magnet DC motor
ORDER CODE: GB786
Specifications:
Supply Voltage Range: 1.5 - 3Vdc
3- WAY CROSS-OVER
Nominal Voltage: 3Vdc
120 WATT 8 OHM MODULE
Stall Torque: 7.7mN.m
Specifications with No Load:
Rotational Speed: 12 511rpm
Specifications at Maximum Efficiency:
Torque: 1.54mN.m
Output Power: 1.61W
Efficiency: 42.36%
Motor Dimensions:
For one bass speaker, mid speaker and one
Body Diameter: 24mm
or two tweeters 4 - 8 Ohm. Separating freLength: 27mm (excluding shaft length)
quency approximately 800 / 5000Hz. The
Shaft: 2mm diameter x 6.5mm length
rate of change of attenuation is 12dB/octave.
ORDER CODE: AB214
Size: 67x65x37mm
MOTOR 2.4 TO 6VDC 11 400RPM
ORDER CODE: PB271
H-BRIDGE STAND
WITH 2 EXTRA T-BARS
3 pole, permanent magnet DC motor
Specifications:
Supply Voltage Range: 2.4 - 6Vdc
Stall Torque: 27mN.m
This bridge stand consists of two single
stands that are connected together with a
horisontal beam. Each stand has a T-bar that Specifications at Maximum Efficiency:
can be adjusted in hight. A special, hammer
finish, coating offers better protection against
scratches and damage.
Torque: 4.444mN.m
Specifications:
Output Power: 5.312W
Maximum Load Mass: 60kg per single stand
Efficiency: 61.74%
Adjustable Height: 2.4 - 4m
Motor Dimensions:
Width: 3m
Body Diameter: 24mm
Colour: grey with black speckles
Length: 31mm (excluding shaft length)
07.74
Shaft: 2mm diameter x 10mm length
ORDER CODE: AA902
MOTOR 6 TO 24VDC 8 700RPM
A 3 pole, permanent magnet DC motor
Specifications:
Supply Voltage Range: 6 - 24Vdc
Torque: 6mN.m
Output Power: 5.617W
Efficiency: 59.58%
Motor Dimensions:
Length: 32.6mm (excluding shaft length)
Shaft: 2.3mm diameter x 12mm length
ORDER CODE: AB215
HIGH POWER DC MOTORS
Note: Powerful DC Motors
Dimensions:
Body:
37.5mm dia. x 57mm length
(excluding shaft length)
Shaft:
3.175mm dia. x 10mm length
Weight: 224g
7.2VDC MOTOR SP3657-30
Specifications:
Nominal Voltage: 7.2Vdc
Supply Current: 8A
Torque: 40mN.m
Output Power: 35W
Efficiency: 65%
ORDER CODE: AB231
12VDC MOTOR SP3657-50
Specifications:
Torque: 26mN.m
Output Power: 13W
Efficiency: 68%
ORDER CODE: AB232
DC GEARED MOTORS
GEARBOX
WITH 2 GEAR SETS
Features:
Use this gearbox set to build your own
motorised gadgets. Use one of the 2 gear
sets for one of two rotational speeds. Please
note that there are not any wheels supplied
in this kit.
Specifications:
Motor: (is supplied)
Specifications:
Rotational Speed: (no load, not geared)
12 000 rpm at 3Vdc / 250mA
Motor Dimensions:
Body Diameter: 21mm
Shaft: 2mm diameter x 8mm long
GEARBOX MOTOR G19/N2738-132
DC permanent magnet motor with gearbox.
Specifications:
RFI Suppression
Gear Ratio: 171:1
Peak Momentary Torque: 300mN.m
No Load Rotational Speed: 32 rpm
Rotational Speed: 25 rpm
Torque: 200mN.m (do not exceed this)
Dimensions:
Height: 29mm
Width: 58mm
Shaft: 3mm diameter x 10mm long
Weight: 110g
ORDER CODE: AB233
GEARBOX MOTOR 20GN152025
2 Gear Sets: (5 gears in each set)
(C: number of cogs, R: mesh radius mm):
Set 1: for approximately 42rpm at 3Vdc
Gear Ratio: 288:1 (for higher torque)
The following gears are fixed to shafts
Pinion Gear: C8 / R2, white
Spur Gear: C40 / R10, white
The following gears turn freely on shafts
Face Gear: C36 / R9.4 - C10 / R2.5, white
Spur Gear: C40 / R10 - C10 / R2.5, red
Spur Gear: C40 / R10 - C10 / R2.5, green
Set 2: for approximately 200rpm at 3Vdc
Gear Ratio: 60:1 (for higher speed)
The following gears are fixed to shafts
Pinion Gear: C10 / R2.5, white
Spur Gear: C36 / R9, white
The following gears turn freely on shafts
Face Gear: C36 / R9.4 - C14 / R3.5, white
Spur Gear: C36 / R9 - C14 / R3.5, red
Spur Gear: C36 / R9 - C14 / R3.5, green
ORDER CODE: GC144
12 RPM GEARBOX MOTOR
Specifications:
RFI Suppression
Gear Ratio: 312:1
No Load Rotational Speed: 12rpm
Rotational Speed: 11rpm min.
Torque: 300mN.m
Gearbox Length L: 24.5mm
ORDER CODE: AB228
4.8 RPM GEARBOX MOTOR
Gearbox Housing:
2 Metal Shafts:
Dimensions: 2 x 40mm and 3 x 52mm
Note: Permanent magnet DC
motor & gearbox. Dimensions:
Gearbox Length L: depends on
order code
Gearbox Diameter: 33mm
Motor Lenght: 41mm (excluding
shaft length)
Motor Diameter: 27.7mm
Shaft: 5mm diameter x 9.5mm
long
Weight: 140g
DC permanent magnet motor with gearbox.
Specifications:
RFI Suppression using a capacitor
Gear Ratio: 50:1
No Load Rotational Speed: 200 rpm
Rotational Speed: 175 rpm
Torque: 30mN.m
Dimensions:
Height: 20mm diameter of round gearbox
Length: 45.6mm (excl. drive shaft length)
Width: 20.4mm
Drive Shaft: 3mm diameter x 7.5mm long
Weight: 30g
ORDER CODE: AB234
GEARBOX MOTORS 33G/N2738
07.75
Specifications:
RFI Suppression
Gear Ratio: 781:1
No Load Rotational Speed: 4.8rpm
Rotational Speed: 4.2rpm
Torque: 300mN.m
Gearbox Length L: 29mm
ORDER CODE: AB229
1.9 RPM GEARBOX MOTOR
Specifications:
RFI Suppression
Gear Ratio: 1953:1
No Load Rotational Speed: 1.9rpm
Rotational Speed: 1.6rpm min.
Torque: 300mN.m
Gearbox Length L: 29mm
ORDER CODE: AB230
STEPPER MOTORS
BIPOLAR STEPPERMOTOR
SAIA UKD34NO4RNZ3
round part diameter: 28mm
mounting hole pitch: 35mm
Shaft: 5mm diameter x 8.5mm, no cogs.
Holding Torque: 310 g.cm, that is
30.411mN.m measured at 100 steps / sec.
Pull-in Torque: 380 g.cm, that is
Stepping Rate: max. 700 steps per second
ORDER CODE: AB216
TRANSFORMERS
CHASSIS MOUNT
TRANSFORMERS
UNIPOLAR STEPPER MOTOR WITH
GEARBOX, 12V, 60mA
Very strong stepper motor
Approximately 48 steps / rotation.
4 connections (2 stators with 2 wires each)
Approximately 10 Ohm per winding
Operating Voltage: 5V / 500mA per winding
Dimensions without axis: 57 x 26mm
Axis diameter = 4mm x lengh = 5mm
Mounting hole pitch = 67mm.
ORDER CODE: GB500
MINI UNIPOLAR STEPPER MOTOR
AEG S21/24A
Steps per Revolution: approximately 4080
6 connections (2 stators with 3 wires each)
4 phase
Ohms per Winding: 200 Ohm
Operating Voltage 12V
Operating Current: 60mA per winding
Gearbox Speed Reduction Ratio: 1:85
Angle of Rotation for each Step of the Shaft:
0.0882º = 7.5º / 85
Dimensions:
height without axis: 17mm
round part diameter: 35mm
mounting hole pitch: 42mm
Shaft: 5mm diameter x 8.5mm, no cogs.
Holding Torque: 750 g.cm, that is
Pull-in Torque: 650 g.cm, that is
Stepping Rate: max. 500 steps per second
ORDER CODE: AB217
MINI SERVO MOTORS
Approximately 24 steps / revolution,
6 connections (2 stators with 3 wires each),
Approximately 56 Ohm per winding
Operating Voltage: 6 - 12V per winding
Body Dimensions: 35 dia. x 25mm height
2 driving axles on opposite sides of body:
Each 2mm dia. x 8mm long and also
One gearwheel 15mm dia. with 28 cogs.
ORDER CODE: GB499
Note: All voltages indicated are
AC voltages.
QB070
QB071
QB072
AA733
AB786
QB073
AA579
AA749
AC660
AB888
AA750
SB041
EB217
AC658
AC659
AC895
EB216
AA751
QB074
EB925
AA753
AC661
PB196
AA752
AA731
AA409
AA410
AA732
AA647
AB370
RB012
UNIPOLAR STEPPER MOTOR WITH
GEARBOX, 12V, 43mA
PCB MOUNT
TRANSFORMERS
SERVO MOTOR 9g
Specifications:
Rotational Speed: 60° in 0.12 seconds,
that is 500° per second
Torque: 1.20kg.cm,
that is 117.72mN.m
Weight: 9g
ORDER CODE: AC600
Steps per Revolution: approximately 4096
5 connections (2 stators with 2 wires each
and common ground)
4 phase
Ohms per Winding: 280 Ohm
Operating Voltage 12V
Gearbox Speed Reduction Ratio: 1:64
Angle of Rotation for each Step of the Shaft:
0.0879º = 5.625º / 64
Dimensions:
height without axis: 19mm
SERVO MOTOR 16g
Specifications:
Rotational Speed: 60° in 0.16 seconds,
that is 375° per second
Torque: 1.50kg.cm,
that is 147.15mN.m
Weight: 16g
ORDER CODE: AC599
07.76
230V to 3-0-3V 1A 6VA
230V to 4-0-4V 1A 8VA
230 to 6-0-6V 1A 12VA
230V to 6-0-6V 2A 24VA
230V to 7.5-0-7.5V 0.3A 4.5VA
230V to 8-0-8V 1A 16VA
230V to 8-0-8V 1.5A 24VA
230V to 9-0-9V 250mA 4.5VA
230V to 9-0-9V 0.5A 9VA
230V to 9-0-9V 0.6A 11VA
230V to 9-0-9V 4A 72VA
230V to 10-0-10V 10A 200VA
230V to 11.5V 7.6A 87VA
230V to 12V 1A 12VA
230V to 12V 2A 24VA
230V to 12V 3.5A 42VA
230V to 12V 4A 50VA
230V to 12-0-12V 50mA 1.2VA
230V to 12-0-12V 0.5A 12VA
230V to 12-0-12V 1A 24VA
230V to 12-0-12V 1.5A 36VA
230V to 12-0-12V 2A 48VA
230V to 12-0-12V 3A 72VA
230V to 12-0-12V 8A 192VA
230V to 15-0-15V 1A 30VA
230V to 16-0-16V 0.62A 20VA
230V to 18-0-18V 0.44A 16VA
230V to 20-0-20V 1A 40VA
230V to 21-0-21V 1.6A 67VA
230V to 24-0-24V 1A 48VA
230V to 28-0-28V 4A 224VA
AA481
EB931
AB371
EB910
EB908
EB909
FB017
EB911
EB912
230V
230V
230V
230V
230V
230V
230V
230V
230V
to
to
to
to
to
to
to
to
to
2x3V 0.5A 3VA
2x6V 0.25A 3VA
2x6V 1A 12VA
2x7.2V 100mA 1.5VA
7.2V 200mA 1.5VA
9.5V 150mA 1.5VA
9V 166mA 1.5VA
12V 170mA 2VA
2x12V 2VA
PLUG IN TRANSFORMERS
230VAC TO 110VAC 300W
TRANSFORMER
WITH USA POWER SOCKET
VARIABLE
TRANSFORMERS
ADJUSTABLE AUTO-TRANSFORMER
PB162
PB163
PB161
PB032
230V
230V
230V
230V
to
to
to
to
9V 1A 9VA
12V 0.5A 6VA
12V 1A 12VA Fused
16V 1A 16VA Fused
TRANSFORMER
This is a 300W step down auto-transformer
Input Voltage: 200 - 240Vac
Output Voltage: 100 - 120Vac
Power Rating: 300VA maximum
Fuse Protection: 1.5A in fuse holder
Dimension:
Length: 192mm
Width: 133mm
Height: 101mm
Cable Length: 1.8m
Weight: 3.2kg
ORDER CODE: AA968
TOROIDAL
TRANSFORMERS
Dimension:
Length: 88mm
Width: 67mm
Height: 51mm
ORDER CODE: AA966
SPECIAL APPLICATION
TRANSFORMERS
TRANSFORMER
TELEPHONE TRANSFORMER
600 OHM / 600 OHM
Note: These are open style
toroidal transformers that may be
centre-tapped, or have two separate, secondary windings. A
mounting kit is supplied.
Dimension:
Length: 115mm
Width: 84mm
Height: 70mm
Cable Length: 1.8m
Weight: 1.1kg
ORDER CODE: AA967
This is an enclosed auto-transformer with
adjustable AC output voltage. It is suitable
for use in work shops, laboratories etc. It has
a built-in analogue panel meter that displays
the output voltage.
Specifications:
Input Voltage:
Single phase AC voltage 50 / 60Hz
inputs for 110Vac and 230Vac
Output Voltage Range:
Single phase, adjustable from 0 to 240Vac
input and output frequencies are the same
Transformer Power Rating: 1kVA
Weight: 7.2kg
ORDER CODE: AB390
AB295
AB374
GB995
AA275
AC884
AA259
230V
230V
230V
230V
230V
230V
to
to
to
to
to
to
9-0-9V 2x8.89A 160VA
15-0-15V 2x5.33A 160VA
18-0-18V 2x4.44A 160VA
25-0-25V 2x6.25A 300VA
30-0-30V 2x2A 120VA
30-0-30V 2x5A 300VA
This is a PCB mount, telephone line isolating
transformer. The primary and secondary
windings have the same impedance.
Specifications:
Turns Ratio: 1:1
Impedance Ratio:
primary Zp: 600 Ohm ± 5%
secondary Zs: 600 Ohm ± 5%
DC resistance:
primary Rp: 60 Ohm ± 5%
secondary Rs: 60 Ohm ± 5%
Impedance Variation: ± 3%
(at 1kHz, 1V amplitude, zero DC-current)
Frequency Response (± 3dB):
300Hz - 4kHz for 0dB at 1kHz
Centre top Unbalance: 3% max.
Primary-to-Secondary Winding Insulation:
100M Ohm min. / 100Vdc
Breakdown Voltage: 100V for 1 minute
Insertion Loss: 2.5dB max.
ORDER CODE: AC811
TRIGGER TRANSFORMERS
FOR XENON STROBO TUBES
07.77
0.6mJ TRIGGER COIL
In this transformer the primary and secondary windings have a common connection.
Output voltage : 4kV
Primary voltage : 130V
Energy : 0.6mJ
ORDER CODE: GB325
0.6mJ TRIGGER COIL
In this transformer the primary and secondary windings have a common connection.
Primary Voltage : 170V
Energy : 0.6mJ
ORDER CODE: JB136
AC880 Flat Ferrite Antenna Rod
13 x 5 x 55mm
AC881 Ferrite Antenna
10mm dia. x 60mm
AC882 Ferrite Antenna
8 x 5 x 80mm
2mJ TRIGGER COIL
In this transformer the primary and secondary windings do not have a common connection.
Primary Voltage : 300V
Energy : 2mJ
ORDER CODE: FB104
PCB MOUNT
STEP-UP TRANSFORMER
6V TO 360V, 13X16X15MM
This is a low power step-up transformer. It
has a primary to secondary turns ratio of 1 :
60. It can be used in battery driven xenon
tube flasher units.
ORDER CODE: GB324
TRANSFORMER AND
FERRITE CORES
FERRITE TOROIDAL CORES
Note: Dimensions are indicated:
Outer dia. x Inner hole dia. x
height
AA567 Toroidal Core 14.6x8.3x5.6mm
(3C85material)
AA568 Toroidal Core 26x13.8x10.7mm
(3C11material)
AA569 Toroidal Core 32.4x18.3x13mm
(3F3material)
07.78
Price List_1 in South African Rand Vat inc
Electronics123: TEL: 012 3322356 fax:012 3320487
AA...
AB...
AC...
AD...
BB...
DB...
EB...
FB...
GB...
GC...
HB...
JB...
KB...
MB...
NB...
PB...
QB...
RB...
SB...
TB...
VB...
XB...
P1
P2
P3
P5
P5
P5
P6
P7
P8
P9
P9
P9
P10
P10
P10
P10
P10
P10
P10
P10
P10
P10
Code
AA001
AA002
AA003
AA004
AA005
AA006
AA007
AA012
AA013
AA014
AA015
AA016
AA019
AA022
AA025
AA027
AA028
AA029
AA030
AA031
AA032
AA034
AA035
AA036
AA037
AA038
AA040
AA041
AA042
AA043
AA044
AA045
AA047
AA048
AA050
AA052
AA053
AA054
AA055
AA063
AA065
AA066
AA067
AA068
AA070
AA071
AA073
AA074
AA075
AA076
AA077
AA078
AA079
AA080
Price List1
R 3.81
R 4.49
R 5.40
R 5.76
R 6.48
R 1.14
R 0.86
R 9.42
R 3.17
R 3.67
R 3.35
R 4.33
R 317.84
R 93.80
R 120.99
R 9.72
R 8.68
R 26.68
R 26.68
R 317.84
R 47.57
R 12.63
R 18.54
R 21.10
R 20.66
R 25.24
R 14.26
R 18.00
R 23.03
R 78.84
R 14.83
R 1.66
R 7.65
R 13.52
R 3.17
R 0.96
R 1.50
R 4.67
R 3.53
R 4.47
R 13.67
R 4.70
R 4.94
R 5.35
R 5.10
R 13.73
R 0.14
R 0.16
R 0.27
R 0.14
R 0.18
R 0.14
R 0.14
R 0.14
AA081
AA082
AA083
AA084
AA085
AA086
AA087
AA088
AA089
AA090
AA091
AA092
AA093
AA094
AA095
AA096
AA097
AA098
AA099
AA100
AA101
AA102
AA103
AA104
AA105
AA106
AA107
AA108
AA109
AA110
AA111
AA112
AA113
AA114
AA115
AA116
AA117
AA118
AA119
AA120
AA121
AA122
AA123
AA124
AA125
AA126
AA127
AA128
AA129
AA130
AA131
AA132
AA133
AA134
AA135
AA136
AA137
AA138
AA139
AA140
AA141
AA142
AA143
AA144
AA145
AA146
AA147
AA148
AA149
AA150
AA151
AA152
AA153
AA154
AA155
AA156
AA157
AA158
AA159
AA160
AA161
AA162
AA163
AA164
AA165
AA166
AA167
AA168
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0.27
0.14
0.14
0.16
0.14
0.14
0.14
0.14
0.14
0.14
0.25
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.27
0.14
0.23
0.14
0.14
0.46
0.25
0.14
0.27
0.14
0.14
0.14
0.14
0.14
0.23
0.14
0.14
0.16
0.14
0.25
0.14
0.25
0.21
0.18
0.14
0.14
0.14
0.14
0.16
0.14
0.14
0.14
0.14
0.16
0.14
0.14
0.16
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.16
0.14
0.18
0.16
0.18
0.16
0.14
0.16
0.14
0.14
0.14
0.21
0.18
0.27
0.89
0.89
2.29
0.75
1.49
2.05
1.09
1.90
2.33
1.96
AA169
AA170
AA171
AA172
AA173
AA174
AA175
AA176
AA177
AA178
AA184
AA185
AA186
AA187
AA188
AA189
AA190
AA194
AA195
AA196
AA197
AA198
AA199
AA200
AA202
AA205
AA206
AA209
AA210
AA215
AA218
AA224
AA225
AA226
AA232
AA233
AA234
AA235
AA236
AA237
AA238
AA241
AA244
AA246
AA248
AA249
AA251
AA252
AA253
AA254
AA255
AA256
AA257
AA258
AA259
AA265
AA266
AA268
AA274
AA275
AA276
AA277
AA278
AA279
AA280
AA282
AA285
AA286
AA287
AA288
AA289
AA290
AA291
AA292
AA293
AA294
AA303
AA304
AA305
AA306
AA307
AA308
AA309
AA310
AA311
AA312
AA313
AA314
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
2.70
2.91
2.98
2.91
3.89
4.16
50.57
10.60
0.18
583.68
0.86
0.68
4.86
4.51
570.91
1,771.56
1,072.51
0.92
0.88
0.40
0.35
0.14
0.57
14.11
61.56
99.33
188.77
203.16
183.32
72.20
50.57
123.83
138.45
130.76
50.57
50.57
143.95
50.57
88.95
252.45
81.69
97.26
105.04
349.28
190.63
143.95
14.93
6.89
4.29
3.42
28.73
112.86
194.94
92.34
328.13
14.14
4.10
17.03
43.00
447.55
2.12
4.80
0.73
0.73
9.01
41.97
0.27
61.56
161.18
66.69
87.21
51.30
71.82
65.66
191.52
99.35
30.40
112.39
1.88
3.29
3.48
12.63
11.06
15.85
152.43
127.12
112.86
55.87
AA315
AA316
AA317
AA320
AA321
AA322
AA323
AA324
AA325
AA326
AA327
AA328
AA329
AA330
AA331
AA332
AA333
AA334
AA335
AA336
AA337
AA338
AA339
AA340
AA341
AA342
AA343
AA344
AA345
AA346
AA351
AA352
AA353
AA354
AA355
AA357
AA358
AA359
AA360
AA361
AA363
AA367
AA368
AA369
AA370
AA371
AA372
AA373
AA374
AA375
AA376
AA377
AA378
AA379
AA380
AA381
AA382
AA393
AA394
AA396
AA397
AA398
AA399
AA400
AA401
AA403
AA404
AA409
AA410
AA411
AA412
AA414
AA415
AA416
AA417
AA418
AA420
AA421
AA422
AA423
AA430
AA432
AA433
AA435
AA437
AA438
AA442
AA443
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
152.66
117.49
27.50
2.64
3.42
2.74
5.24
3.42
2.64
2.74
2.96
2.39
2.74
2.86
2.05
0.58
0.68
0.68
0.68
0.55
0.68
0.55
0.09
0.68
0.68
0.68
0.68
200.64
79.00
117.49
48.02
37.96
8.12
26.58
12.54
6.45
2.29
2.37
0.42
0.73
6.98
0.09
0.80
0.80
0.80
0.80
0.80
0.91
0.91
0.91
0.91
0.91
5.34
9.78
0.73
4.09
3.17
4.02
2.84
121.07
75.92
75.92
75.92
75.92
75.92
7.28
7.28
135.33
95.97
3.28
0.41
12.24
11.43
18.24
17.37
456.00
202.97
197.81
22.15
12.67
20.52
20.06
10.18
16.30
2.76
22.12
7.41
2.34
1
AA447
AA449
AA450
AA451
AA452
AA453
AA454
AA455
AA456
AA457
AA458
AA459
AA460
AA461
AA462
AA463
AA464
AA465
AA466
AA467
AA468
AA469
AA470
AA471
AA472
AA473
AA474
AA476
AA477
AA478
AA479
AA480
AA481
AA483
AA484
AA485
AA486
AA487
AA488
AA489
AA490
AA491
AA497
AA498
AA499
AA500
AA501
AA502
AA503
AA504
AA505
AA506
AA507
AA508
AA509
AA510
AA511
AA512
AA515
AA516
AA517
AA519
AA520
AA521
AA522
AA524
AA526
AA529
AA531
AA533
AA534
AA535
AA536
AA537
AA538
AA539
AA540
AA541
AA544
AA545
AA547
AA548
AA549
AA550
AA552
AA553
AA555
AA556
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
70.45
623.14
0.23
0.23
0.23
0.23
0.23
0.23
0.23
0.34
0.23
0.34
0.23
0.27
0.35
0.23
0.34
0.36
0.34
0.34
0.35
0.41
0.34
3.94
5.02
3.35
7.31
6.61
67.59
63.82
7.55
3.33
58.58
11.63
5.02
13.14
8.44
66.13
3.76
1.52
51.62
2.51
1.98
2.09
4.33
2.47
3.12
3.61
2.50
2.23
1.33
1.33
2.53
2.15
3.37
3.37
4.22
5.70
11.70
77.81
6.38
43.09
1.39
26.94
0.38
0.18
23.87
13.91
1.33
2.34
4.15
4.81
8.21
9.30
25.60
8.21
8.98
18.56
19.84
21.44
38.47
21.33
55.35
2.74
5.02
7.87
1.78
7.30
AA557
AA558
AA559
AA563
AA564
AA565
AA567
AA568
AA569
AA571
AA572
AA573
AA574
AA575
AA576
AA577
AA579
AA580
AA581
AA582
AA583
AA584
AA585
AA586
AA587
AA588
AA590
AA591
AA592
AA593
AA594
AA595
AA596
AA597
AA598
AA599
AA600
AA601
AA602
AA603
AA604
AA605
AA606
AA607
AA608
AA609
AA612
AA614
AA615
AA616
AA623
AA626
AA627
AA628
AA629
AA630
AA634
AA635
AA636
AA637
AA638
AA639
AA640
AA641
AA642
AA643
AA644
AA647
AA648
AA649
AA650
AA651
AA652
AA653
AA654
AA655
AA656
AA657
AA658
AA659
AA660
AA661
AA662
AA663
AA664
AA666
AA667
AA668
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
45.46
5.93
10.99
0.41
0.41
23.78
6.84
11.40
64.43
2.42
4.81
7.30
6.77
9.26
17.93
6.04
115.53
17.62
2.87
1.28
3.58
0.72
0.51
0.96
49.51
9.12
48.74
50.34
62.80
70.30
83.22
58.81
66.64
77.88
100.30
89.80
107.38
127.46
76.81
91.39
151.86
173.09
8.87
55.38
14.10
14.34
15.21
0.46
1.19
11.51
44.51
10.03
5.94
6.62
2.05
8.46
0.97
1.00
1.00
1.00
1.01
1.08
6.84
20.41
4.80
3.41
15.87
202.24
5.02
5.36
8.89
0.65
0.86
1.20
1.54
2.63
3.12
3.11
3.69
5.91
8.89
3.40
2.51
2.85
4.79
6.09
8.89
9.90
AA669
AA674
AA675
AA677
AA678
AA679
AA683
AA684
AA686
AA687
AA690
AA692
AA694
AA695
AA696
AA697
AA698
AA699
AA700
AA701
AA702
AA703
AA704
AA705
AA707
AA708
AA710
AA711
AA712
AA713
AA714
AA715
AA717
AA718
AA720
AA724
AA725
AA726
AA727
AA728
AA729
AA730
AA731
AA732
AA733
AA735
AA737
AA738
AA740
AA741
AA742
AA744
AA745
AA749
AA750
AA751
AA752
AA753
AA755
AA760
AA761
AA762
AA764
AA765
AA767
AA769
AA770
AA771
AA772
AA773
AA774
AA777
AA778
AA779
AA780
AA781
AA782
AA784
AA785
AA786
AA787
AA790
AA791
AA792
AA795
AA797
AA798
AA799
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
7.81
1.85
153.90
25.15
17.10
32.73
0.83
0.75
6.41
11.90
14.32
57.64
383.07
1.54
1.54
2.05
6.79
112.86
119.02
1.45
1.45
357.50
1.81
1.20
32.93
7.40
23.60
10.45
20.98
216.14
184.40
367.25
29.75
17.99
3.97
25.16
0.98
1.07
2.70
4.54
40.94
55.30
128.18
132.74
108.97
0.86
6.32
27.53
3.25
15.71
20.29
24.75
4.90
48.35
208.40
44.89
406.66
34.25
3.42
63.87
15.49
34.50
8.37
4.54
0.72
3.10
4.07
2.20
3.33
1.78
111.83
2.57
0.75
0.38
1.79
2.85
2.46
3.06
6.98
41.04
3.03
2.96
1.03
8.78
1.64
1.30
1.30
1.92
AA800
AA801
AA802
AA803
AA804
AA805
AA806
AA807
AA808
AA809
AA810
AA814
AA815
AA819
AA821
AA822
AA823
AA825
AA826
AA827
AA828
AA829
AA830
AA831
AA832
AA833
AA834
AA835
AA836
AA837
AA840
AA842
AA843
AA844
AA845
AA846
AA847
AA848
AA849
AA850
AA851
AA852
AA853
AA854
AA855
AA856
AA857
AA859
AA860
AA861
AA862
AA863
AA864
AA865
AA866
AA868
AA869
AA870
AA871
AA872
AA873
AA874
AA876
AA877
AA879
AA884
AA887
AA891
AA893
AA894
AA895
AA896
AA899
AA902
AA903
AA908
AA909
AA911
AA913
AA914
AA915
AA916
AA917
AA918
AA919
AA920
AA925
AA926
AA927
AA932
AA933
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
1.37
0.41
1.44
1.03
0.51
1.03
0.68
1.71
1.20
2.71
0.68
0.41
0.46
1.88
2.12
3.88
4.79
2.15
3.42
0.68
1.64
2.96
4.38
2.94
3.69
5.70
3.42
1.68
2.77
2.77
15.96
8.62
39.51
3.99
3.42
1.03
0.79
0.68
5.70
5.02
18.24
3.44
13.68
12.54
5.02
6.84
17.46
0.46
0.89
4.56
4.56
1.33
5.47
1.30
1.44
0.68
0.96
0.86
2.69
1.68
1.03
1.64
2.98
1,714.56
7.23
177.75
62.95
5.02
9.05
2.63
51.30
19.72
0.86
18.43
5.02
47.20
0.00
159.52
92.34
24.21
20.52
22.80
22.57
26.68
55.40
82.08
8.64
4.33
0.00
69.77
8.89
AA938
AA939
AA940
AA941
AA942
AA943
AA945
AA946
AA947
AA948
AA949
AA950
AA951
AA952
AA953
AA954
AA955
AA956
AA957
AA958
AA960
AA961
AA962
AA966
AA967
AA968
AA969
AA970
AA971
AA975
AA976
AA977
AA978
AA979
AA980
AA982
AA983
AA984
AA985
AA986
AA987
AA989
AA990
AA994
AA996
AA997
AA998
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
2.26
0.68
0.82
0.46
2.10
1.16
1.16
0.68
1.16
0.62
1.16
1.16
1.54
1.16
0.68
0.75
0.75
5.45
0.14
0.27
37.55
22.80
3.39
52.04
116.83
202.51
0.59
4.53
2.69
136.46
59.23
15.05
13.22
10.28
15.05
505.25
86.73
29.75
79.74
63.09
51.30
83.33
6.09
142.86
14.93
30.80
22.73
AB001
AB002
AB004
AB005
AB006
AB007
AB008
AB010
AB011
AB012
AB014
AB015
AB016
AB017
AB018
AB019
AB020
AB021
AB022
AB023
AB024
AB025
AB026
AB027
AB029
AB031
AB033
AB034
AB036
AB037
AB038
AB039
AB040
AB041
AB042
AB043
AB044
AB045
AB046
AB047
AB048
AB049
AB050
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
98.50
8.54
269.20
732.06
63.57
5.79
6.08
26.49
23.64
95.06
62.71
194.30
72.24
423.21
3.98
178.48
11.56
11.82
251.69
359.66
180.22
212.68
366.13
177.68
247.82
0.81
170.42
298.24
0.84
3.72
4.70
1.20
1.20
1.20
1.20
1.20
0.96
0.96
0.96
0.96
0.96
0.96
0.96
AB051
AB052
AB053
AB054
AB055
AB056
AB057
AB058
AB059
AB060
AB061
AB062
AB063
AB064
AB065
AB066
AB067
AB068
AB069
AB070
AB071
AB074
AB076
AB077
AB080
AB084
AB086
AB087
AB088
AB090
AB091
AB092
AB093
AB094
AB095
AB096
AB097
AB098
AB099
AB100
AB102
AB103
AB104
AB106
AB107
AB108
AB110
AB111
AB112
AB113
AB114
AB115
AB117
AB118
AB120
AB121
AB124
AB125
AB126
AB127
AB128
AB129
AB130
AB131
AB132
AB133
AB134
AB136
AB137
AB138
AB139
AB140
AB142
AB143
AB144
AB145
AB146
AB147
AB148
AB149
AB151
AB152
AB153
AB154
AB155
AB156
AB157
AB158
AB159
AB160
AB161
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0.96
0.96
0.97
0.96
0.96
0.96
0.96
1.11
0.96
2.30
0.96
990.40
113.49
10.72
77.98
21.66
20.29
20.29
20.29
31.04
165.31
7.91
5.67
27.50
105.10
79.37
1.73
20.94
72.06
214.58
214.58
292.59
266.22
85.59
50.57
50.57
167.30
50.57
143.95
93.37
105.04
100.80
428.82
155.62
85.59
190.63
66.13
116.71
525.31
77.81
136.16
722.78
186.74
51.21
42.80
335.45
50.57
50.57
136.16
335.45
105.04
147.84
128.39
66.13
178.96
286.77
133.82
387.33
273.20
105.04
335.45
50.57
1,037.35
361.15
303.34
55.68
104.63
570.76
342.27
44.12
3.12
37.02
34.28
33.27
114.58
82.83
101.20
72.06
2.79
2.01
11.49
AB162
AB163
AB164
AB165
AB167
AB169
AB170
AB171
AB172
AB173
AB174
AB176
AB177
AB178
AB180
AB183
AB187
AB188
AB189
AB192
AB193
AB194
AB195
AB196
AB197
AB198
AB199
AB200
AB201
AB202
AB203
AB204
AB205
AB206
AB207
AB208
AB209
AB210
AB211
AB212
AB213
AB214
AB215
AB216
AB217
AB218
AB219
AB220
AB222
AB224
AB225
AB226
AB227
AB228
AB229
AB230
AB231
AB232
AB233
AB234
AB235
AB239
AB242
AB243
AB244
AB248
AB249
AB251
AB252
AB254
AB255
AB256
AB257
AB258
AB259
AB260
AB261
AB264
AB265
AB266
AB267
AB281
AB283
AB284
AB285
AB286
AB287
AB288
AB289
AB290
AB292
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
55.38
20.29
3.08
17.08
11.40
19.38
52.33
43.09
111.83
253.34
2.77
19.39
2.91
72.06
62.91
132.17
289.38
348.11
1,269.38
1,520.91
1,953.38
1.01
1.01
284.54
391.25
8.88
8.88
36.41
22.79
76.56
437.02
413.35
890.01
178.07
61.22
262.33
536.43
690.36
78.39
72.33
206.70
6.51
21.95
88.67
109.98
0.55
0.67
0.67
680.51
14.52
53.10
160.06
52.36
297.00
300.41
300.41
200.28
200.28
300.41
300.41
72.06
14.64
233.47
414.96
467.34
72.06
67.92
494.67
494.67
2,683.98
2,683.98
49.25
7.05
4.34
922.48
9.61
13.20
3.98
72.06
51.22
56.94
0.09
814.05
814.05
128.22
13.98
4.66
2.34
3.47
1,461.22
107.13
2
AB293
AB294
AB295
AB296
AB297
AB298
AB299
AB300
AB303
AB304
AB305
AB306
AB307
AB308
AB309
AB310
AB311
AB312
AB313
AB314
AB315
AB316
AB317
AB318
AB319
AB320
AB321
AB322
AB323
AB324
AB325
AB326
AB327
AB328
AB329
AB330
AB331
AB332
AB333
AB334
AB335
AB336
AB337
AB338
AB339
AB340
AB341
AB342
AB343
AB344
AB345
AB346
AB347
AB348
AB349
AB350
AB351
AB352
AB353
AB354
AB355
AB356
AB357
AB358
AB359
AB360
AB361
AB362
AB363
AB364
AB365
AB366
AB369
AB370
AB371
AB372
AB373
AB374
AB375
AB376
AB377
AB379
AB380
AB382
AB383
AB384
AB385
AB386
AB387
AB388
AB389
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
4.75
5.80
218.66
170.85
227.93
120.46
102.81
1,201.08
138.46
424.73
272.76
186.31
156.28
313.14
260.95
255.42
48.18
53.47
440.51
390.20
4,103.89
376.10
455.87
166.68
417.51
81.83
148.72
114.43
163.66
113.68
113.68
113.68
64.44
100.50
107.95
57.46
201.35
4.24
4.82
6.58
7.28
1,694.13
334.05
10.48
143.95
81.69
48.07
53.39
77.39
8.27
2.29
3.17
4.00
7.60
16.68
12.36
8.88
192.11
93.15
1,477.05
117.42
155.31
448.82
275.10
2,580.73
2,580.73
52.18
172.09
173.54
2,023.14
2,782.23
23.15
236.31
192.02
89.17
3.73
2.57
224.41
265.46
20.58
61.56
234.67
25.65
10.17
52.60
32.48
29.74
57.46
102.94
7.10
5.76
AB390
AB391
AB393
AB394
AB395
AB396
AB397
AB398
AB399
AB400
AB401
AB402
AB403
AB404
AB405
AB406
AB407
AB408
AB409
AB410
AB411
AB412
AB413
AB414
AB415
AB416
AB417
AB418
AB419
AB420
AB421
AB422
AB423
AB424
AB425
AB426
AB427
AB428
AB430
AB431
AB432
AB435
AB436
AB437
AB438
AB439
AB440
AB441
AB442
AB443
AB444
AB445
AB446
AB447
AB448
AB449
AB450
AB451
AB452
AB453
AB454
AB455
AB456
AB457
AB458
AB459
AB460
AB461
AB462
AB463
AB464
AB465
AB466
AB467
AB468
AB469
AB470
AB471
AB472
AB473
AB474
AB475
AB476
AB477
AB478
AB479
AB480
AB481
AB482
AB483
AB484
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
1,002.47
72.06
4.58
1.47
3.00
19.02
56.73
136.66
17.53
22.15
10.25
4.62
8.19
44.76
49.50
414.80
82.15
287.33
6.62
15.34
31.36
2.31
12.95
26.00
4.34
69.62
27.93
40.05
15.20
36.57
49.42
3.10
9.33
11.06
0.99
1.22
3.73
5.31
8.97
4.06
6.27
2.75
2.78
2.59
2.60
1.62
7.09
6.24
3.51
6.97
17.51
20.16
20.66
25.65
1.85
2.33
2.33
3.32
2.53
2.99
10.81
10.81
10.64
10.00
9.45
10.00
3.52
4.07
13.35
2.43
3.43
4.83
7.36
8.40
8.61
15.68
0.46
48.93
3.09
3.27
2.28
2.28
3.27
2.83
3.27
3.27
3.27
3.17
0.97
7.24
19.45
AB485
AB486
AB487
AB488
AB489
AB490
AB491
AB492
AB493
AB494
AB495
AB496
AB497
AB498
AB499
AB500
AB501
AB502
AB503
AB504
AB505
AB506
AB507
AB508
AB509
AB510
AB511
AB512
AB514
AB515
AB516
AB517
AB518
AB519
AB520
AB521
AB522
AB523
AB524
AB525
AB526
AB527
AB528
AB529
AB530
AB531
AB532
AB533
AB534
AB535
AB536
AB537
AB538
AB539
AB540
AB541
AB542
AB543
AB544
AB545
AB546
AB547
AB548
AB549
AB550
AB551
AB553
AB554
AB556
AB557
AB559
AB560
AB561
AB562
AB563
AB566
AB567
AB568
AB569
AB570
AB571
AB572
AB573
AB574
AB575
AB576
AB577
AB578
AB579
AB580
AB581
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
2.37
2.63
2.37
2.37
2.37
2.47
1.90
3.33
2.39
3.33
2.67
4.55
5.72
7.44
4.47
6.38
5.99
91.63
4.57
6.01
7.60
12.14
33.46
5.00
14.54
81.11
1.14
1.14
40.16
38.13
41.31
43.49
44.30
8.11
29.49
4.97
5.43
6.00
6.85
6.42
10.33
10.78
11.45
14.43
21.43
1.50
1.77
22.50
21.42
2.42
2.64
3.31
49.36
2.21
3.61
4.45
6.92
10.59
2.18
3.28
3.37
5.45
2.22
2.31
3.50
6.11
1,839.55
1,803.48
2,272.38
2,272.38
712.29
712.29
32.24
5.16
72.06
102.60
106.70
434.11
735.07
963.07
319.47
566.01
1,266.30
297.31
353.86
342.91
210.95
194.71
3.33
111.39
217.27
AB582
AB583
AB584
AB585
AB586
AB587
AB588
AB589
AB590
AB591
AB592
AB593
AB594
AB595
AB596
AB597
AB598
AB599
AB600
AB601
AB602
AB603
AB604
AB605
AB606
AB607
AB608
AB609
AB611
AB612
AB613
AB614
AB615
AB616
AB617
AB618
AB619
AB620
AB621
AB622
AB624
AB625
AB626
AB627
AB628
AB629
AB630
AB631
AB632
AB633
AB634
AB635
AB636
AB638
AB639
AB640
AB641
AB642
AB643
AB645
AB646
AB647
AB648
AB649
AB650
AB651
AB652
AB653
AB654
AB655
AB656
AB657
AB658
AB659
AB660
AB661
AB662
AB663
AB664
AB665
AB666
AB667
AB668
AB669
AB670
AB671
AB672
AB673
AB674
AB675
AB676
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200.81
132.56
204.65
709.54
197.62
406.18
68.57
130.72
160.26
190.68
208.36
244.88
314.75
401.43
328.42
127.22
290.67
214.14
338.57
341.59
9.69
23.05
38.13
1.53
492.48
328.32
328.32
273.60
276.97
190.72
335.45
1.45
90.29
1.85
111.83
0.68
22.57
20.93
20.29
20.29
11.10
20.77
22.42
23.40
27.99
38.30
14.10
7.60
14.10
8.42
9.12
14.10
21.14
20.77
20.77
11.10
14.10
14.34
11.30
20.77
22.42
7.48
8.07
29.70
14.10
15.23
27.99
14.10
20.77
27.99
5.53
510.72
319.88
1,039.68
5.08
4.47
8.73
12.97
19.63
21.98
45.10
24.56
23.70
77.60
84.83
92.89
5.08
4.63
9.53
16.23
21.64
AB677
AB678
AB679
AB680
AB681
AB682
AB683
AB684
AB685
AB688
AB689
AB690
AB692
AB693
AB694
AB695
AB696
AB697
AB698
AB699
AB700
AB701
AB702
AB703
AB704
AB705
AB706
AB707
AB708
AB709
AB710
AB711
AB712
AB713
AB714
AB715
AB716
AB718
AB719
AB720
AB721
AB722
AB723
AB724
AB725
AB726
AB727
AB728
AB729
AB730
AB731
AB732
AB733
AB734
AB735
AB736
AB737
AB738
AB739
AB740
AB741
AB742
AB743
AB744
AB745
AB746
AB747
AB748
AB749
AB751
AB752
AB754
AB755
AB756
AB757
AB758
AB759
AB760
AB761
AB762
AB763
AB764
AB765
AB766
AB767
AB768
AB769
AB770
AB771
AB772
AB773
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
22.98
56.26
26.22
29.71
101.78
459.94
50.57
136.16
50.57
15.42
3.21
300.69
335.62
3.12
15.54
161.32
1,739.45
958.38
139.54
147.74
55.40
112.86
88.24
57.46
104.65
53.35
174.42
67.72
43.09
1,114.46
77.98
106.70
63.61
153.90
80.03
68.80
8.11
2.66
5.65
10.28
7.56
8.34
15.29
15.41
11.81
13.42
9.94
8.56
9.03
9.17
8.79
5.83
7.41
7.23
7.62
6.17
14.23
7.64
11.27
9.92
19.78
7.92
11.94
6.68
391.98
54.44
68.80
13.67
6.27
43.62
10.58
22.64
6.04
61.69
3.74
7.30
4.56
8.78
9.48
8.78
11.06
90.81
1.95
1.95
1.95
1.95
1.56
1.56
1.56
1.56
2.64
AB774
AB775
AB776
AB777
AB778
AB779
AB780
AB781
AB782
AB783
AB784
AB785
AB786
AB787
AB788
AB789
AB790
AB791
AB792
AB793
AB794
AB795
AB796
AB797
AB798
AB799
AB800
AB801
AB803
AB804
AB805
AB806
AB807
AB808
AB809
AB810
AB811
AB812
AB813
AB814
AB815
AB816
AB817
AB818
AB819
AB820
AB821
AB822
AB823
AB824
AB825
AB826
AB827
AB828
AB829
AB830
AB831
AB832
AB833
AB834
AB835
AB836
AB837
AB838
AB839
AB840
AB841
AB842
AB843
AB844
AB845
AB847
AB848
AB849
AB851
AB852
AB853
AB854
AB855
AB856
AB857
AB858
AB859
AB860
AB861
AB862
AB863
AB864
AB865
AB866
AB867
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
1.56
1.56
2.64
1.95
2.78
1.95
2.64
1.68
3.25
1.35
1.56
39.91
44.65
2.64
15.95
2.21
1.56
2.64
1.95
2.64
1.73
2.64
1.56
2.82
1.56
2.64
2.78
1.56
1.95
2.78
1.95
1.23
1.56
2.69
1.56
2.64
1.56
2.78
1.56
2.64
1.95
2.78
1.95
2.78
1.56
3.00
1.56
2.78
1.56
2.78
1.56
1.56
21.45
21.90
18.87
18.83
21.45
36.64
21.59
37.06
19.73
31.41
18.92
20.98
18.06
21.59
18.30
18.33
30.08
25.67
19.62
22.02
25.41
22.02
43.43
22.02
22.02
47.15
49.97
47.15
50.03
49.28
49.97
46.77
54.41
46.77
131.44
129.62
113.53
134.19
113.20
AB868
AB869
AB870
AB871
AB872
AB873
AB874
AB875
AB876
AB877
AB878
AB879
AB880
AB881
AB882
AB883
AB884
AB885
AB886
AB887
AB888
AB889
AB891
AB892
AB893
AB894
AB895
AB896
AB897
AB898
AB899
AB900
AB901
AB902
AB903
AB904
AB905
AB906
AB907
AB908
AB909
AB910
AB911
AB912
AB913
AB914
AB915
AB916
AB917
AB918
AB919
AB920
AB921
AB922
AB923
AB924
AB925
AB926
AB927
AB928
AB929
AB930
AB931
AB932
AB933
AB934
AB935
AB936
AB937
AB938
AB939
AB940
AB941
AB942
AB943
AB944
AB945
AB946
AB947
AB948
AB949
AB950
AB951
AB952
AB953
AB954
AB955
AB956
AB957
AB958
AB959
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
104.36
127.02
118.88
107.19
3.01
120.05
166.82
20.95
19.13
20.95
18.50
17.18
19.13
17.76
20.36
19.14
19.47
21.00
19.73
19.47
66.69
3.37
5.04
2.57
3.04
2.47
2.72
12.33
26.20
2.78
2.50
2.90
3.33
3.24
1.73
9.72
10.98
9.72
8.13
10.69
9.43
9.72
9.72
10.34
9.72
10.34
10.17
11.72
9.72
10.07
6.67
13.73
11.46
16.36
14.43
13.57
12.27
13.19
14.95
12.22
11.43
18.05
10.97
13.79
11.06
16.02
11.43
17.91
17.46
11.15
17.46
8.90
8.90
8.20
8.88
8.88
11.43
9.15
7.96
7.97
11.30
9.15
7.38
13.73
7.96
7.33
16.21
74.17
8.78
2.74
8.32
3
AB960
AB962
AB963
AB964
AB965
AB966
AB967
AB968
AB969
AB970
AB971
AB972
AB973
AB974
AB975
AB976
AB978
AB979
AB980
AB981
AB982
AB983
AB984
AB985
AB986
AB987
AB988
AB989
AB990
AB991
AB992
AB993
AB994
AB995
AB996
AB997
AB998
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
8.47
7.58
8.86
11.72
14.20
6.92
8.57
11.91
10.86
8.49
12.33
6.63
8.88
8.88
8.88
9.78
8.32
10.10
10.51
5.76
7.97
9.63
10.86
9.88
9.68
7.38
57.46
14.57
18.60
31.89
69.49
68.80
21.15
6.84
2.03
2.09
8.88
AC001
AC002
AC003
AC004
AC005
AC006
AC007
AC008
AC009
AC010
AC011
AC012
AC013
AC014
AC015
AC016
AC017
AC018
AC019
AC020
AC023
AC024
AC025
AC026
AC027
AC030
AC031
AC032
AC033
AC034
AC035
AC036
AC037
AC038
AC039
AC040
AC041
AC042
AC043
AC044
AC045
AC046
AC047
AC048
AC049
AC050
AC051
AC052
AC053
AC054
AC055
AC056
AC057
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
15.80
32.60
27.59
18.29
20.02
18.29
19.46
547.20
319.20
153.90
8,178.69
4,172.80
743.61
20.02
28.03
18.29
27.98
31.02
10.94
8.87
18.66
54.83
23.21
22.70
39.43
35.63
20.75
2.91
3.14
2.91
3.99
3.99
3.76
3.99
4.00
4.39
4.39
4.74
4.39
6.61
9.91
10.78
10.77
10.73
10.39
10.72
11.31
11.15
10.51
10.58
13.02
13.12
14.64
AC058
AC059
AC060
AC061
AC062
AC063
AC064
AC065
AC066
AC067
AC068
AC069
AC070
AC071
AC072
AC073
AC074
AC075
AC076
AC077
AC078
AC079
AC080
AC081
AC082
AC083
AC084
AC085
AC086
AC087
AC088
AC089
AC090
AC091
AC092
AC093
AC094
AC095
AC096
AC097
AC098
AC099
AC100
AC101
AC102
AC103
AC104
AC105
AC106
AC107
AC108
AC109
AC110
AC111
AC112
AC113
AC114
AC115
AC116
AC117
AC118
AC119
AC120
AC121
AC122
AC123
AC124
AC125
AC126
AC127
AC128
AC129
AC130
AC131
AC132
AC133
AC134
AC135
AC136
AC137
AC138
AC139
AC140
AC141
AC142
AC143
AC144
AC145
AC146
AC147
AC148
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
14.55
11.50
11.07
7.95
9.94
7.96
8.21
7.98
7.95
11.07
8.57
9.80
1.21
2.87
2.90
2.67
1.43
2.67
2.35
2.37
2.57
2.88
1.13
2.67
2.37
2.67
2.37
1.38
2.67
2.38
2.59
1.38
2.67
2.88
2.67
0.78
2.67
2.37
2.87
1.38
2.59
2.85
2.88
2.59
2.57
1.28
2.59
2.75
2.88
2.62
2.85
1.39
2.88
2.75
2.78
2.70
2.88
1.38
2.59
2.57
2.60
2.57
1.27
2.76
2.68
2.84
2.88
2.57
2.47
2.85
2.79
2.62
2.57
1.29
2.30
2.57
2.88
2.88
1.28
2.55
2.58
2.58
1.38
2.85
2.62
2.57
2.52
1.27
2.58
2.63
2.85
AC149
AC150
AC151
AC152
AC153
AC154
AC155
AC156
AC157
AC158
AC159
AC160
AC161
AC162
AC163
AC164
AC165
AC166
AC167
AC168
AC169
AC170
AC171
AC172
AC173
AC174
AC175
AC176
AC177
AC178
AC179
AC180
AC181
AC182
AC183
AC184
AC185
AC186
AC187
AC188
AC189
AC190
AC191
AC192
AC193
AC194
AC195
AC196
AC197
AC198
AC199
AC200
AC201
AC202
AC203
AC204
AC205
AC206
AC207
AC208
AC209
AC210
AC211
AC212
AC213
AC214
AC215
AC216
AC217
AC218
AC219
AC220
AC221
AC222
AC223
AC224
AC225
AC226
AC227
AC228
AC229
AC230
AC231
AC232
AC233
AC234
AC235
AC236
AC237
AC238
AC239
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
2.54
1.29
2.58
2.57
2.58
2.58
1.38
2.57
2.58
1.29
2.57
2.96
1.28
2.72
2.57
2.57
1.38
2.57
2.96
1.37
2.82
2.55
1.27
2.57
2.58
1.38
2.57
2.55
1.72
2.88
1.72
2.86
1.72
2.85
1.72
2.85
2.06
2.85
1.72
2.86
1.90
2.85
1.71
2.85
1.71
2.83
1.70
2.96
1.71
2.85
1.71
2.85
0.82
1.08
0.82
1.29
0.82
0.82
1.29
1.29
1.43
1.72
1.38
1.43
1.72
1.72
1.72
1.72
1.70
1.71
1.76
1.76
1.76
2.76
1.76
1.71
2.18
2.14
3.09
2.57
4.14
3.43
3.47
3.78
4.06
4.00
3.36
3.21
3.40
3.71
3.43
AC240
AC241
AC242
AC243
AC244
AC245
AC246
AC247
AC248
AC249
AC250
AC251
AC252
AC253
AC254
AC255
AC256
AC258
AC259
AC260
AC261
AC262
AC263
AC264
AC265
AC266
AC267
AC268
AC269
AC270
AC271
AC272
AC273
AC274
AC275
AC276
AC277
AC278
AC279
AC280
AC281
AC282
AC283
AC284
AC285
AC286
AC287
AC288
AC289
AC290
AC291
AC292
AC293
AC294
AC295
AC296
AC297
AC298
AC299
AC300
AC301
AC302
AC303
AC304
AC305
AC306
AC307
AC308
AC309
AC310
AC311
AC312
AC313
AC314
AC315
AC316
AC318
AC319
AC320
AC321
AC322
AC323
AC324
AC326
AC327
AC328
AC329
AC330
AC331
AC332
AC333
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
3.45
4.61
22.18
8.36
13.61
18.94
18.67
13.25
12.22
17.78
1.39
1.44
3.19
1.61
3.16
3.14
2.72
3.88
7.17
10.33
18.26
2.69
4.15
21.82
10.50
5.81
6.21
6.46
9.56
0.62
0.57
0.65
0.34
0.35
0.34
11.54
9.17
9.44
9.59
8.81
8.88
10.23
8.88
9.59
10.77
9.44
8.80
8.88
8.88
8.87
2.34
3.04
3.34
3.11
2.31
2.45
3.10
2.68
2.66
2.68
2.70
3.20
1.40
2.26
1.44
7.55
3.04
4.53
3.45
9.80
15.52
1.52
1.50
1.79
7.64
6.11
5.37
5.13
2.96
3.34
15.20
2.51
4.25
9.95
8.00
5.49
51.53
74.84
105.94
81.87
99.45
AC334
AC335
AC336
AC337
AC338
AC339
AC340
AC341
AC342
AC343
AC344
AC345
AC346
AC347
AC348
AC349
AC350
AC351
AC352
AC353
AC354
AC355
AC356
AC357
AC358
AC359
AC360
AC361
AC362
AC363
AC364
AC365
AC366
AC367
AC368
AC369
AC370
AC371
AC372
AC373
AC374
AC375
AC376
AC377
AC378
AC379
AC380
AC381
AC382
AC383
AC384
AC385
AC386
AC387
AC388
AC389
AC390
AC391
AC392
AC393
AC394
AC395
AC396
AC397
AC398
AC399
AC400
AC401
AC402
AC403
AC404
AC405
AC406
AC407
AC408
AC409
AC410
AC411
AC412
AC413
AC414
AC415
AC416
AC417
AC418
AC419
AC420
AC421
AC422
AC423
AC424
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
50.26
210.95
0.88
1.07
1.06
1.37
1.30
2.57
0.36
0.43
0.39
2.50
1.72
2.51
7.34
1.49
2.05
2.99
2.50
2.29
2.98
3.04
1.50
68.80
3.08
29.50
29.74
32.48
3.14
3.39
4.06
21.02
5.03
7.17
0.15
0.15
0.73
0.73
3.10
3.18
3.18
3.18
3.43
3.43
3.43
3.43
3.43
3.43
3.43
3.43
3.43
3.33
3.43
3.43
3.43
29.50
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.21
0.28
0.28
0.23
0.28
0.36
0.28
0.28
0.28
0.28
0.22
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.18
0.28
0.28
AC425
AC426
AC427
AC428
AC429
AC430
AC431
AC432
AC433
AC434
AC435
AC436
AC437
AC438
AC439
AC440
AC441
AC442
AC443
AC444
AC445
AC446
AC447
AC448
AC449
AC450
AC451
AC452
AC453
AC454
AC455
AC456
AC457
AC458
AC459
AC460
AC461
AC462
AC463
AC464
AC465
AC466
AC467
AC468
AC469
AC470
AC471
AC472
AC473
AC474
AC475
AC476
AC477
AC478
AC479
AC480
AC481
AC482
AC483
AC484
AC485
AC486
AC487
AC488
AC489
AC490
AC491
AC492
AC493
AC494
AC495
AC496
AC497
AC498
AC499
AC501
AC502
AC503
AC504
AC505
AC506
AC507
AC508
AC509
AC510
AC511
AC512
AC513
AC514
AC515
AC516
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0.28
0.31
0.28
0.28
0.28
0.28
0.28
0.21
0.28
0.28
0.28
0.28
0.28
0.32
0.28
0.21
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.32
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.32
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.28
0.41
0.41
0.41
0.41
0.62
464.79
43.62
5.13
11.13
12.20
0.75
0.96
29.24
42.99
9.05
14.26
21.07
23.22
581.40
16.31
6.74
7.41
5.19
3.43
3.43
11.25
16.52
12.28
41.82
2.59
12.07
3.81
8.99
9.21
5.65
5.40
6.67
12.00
7.41
10.25
18.94
AC517
AC518
AC519
AC520
AC521
AC522
AC523
AC524
AC525
AC526
AC527
AC530
AC531
AC532
AC533
AC534
AC535
AC536
AC537
AC538
AC539
AC540
AC541
AC542
AC543
AC544
AC545
AC546
AC547
AC548
AC549
AC550
AC551
AC552
AC553
AC554
AC555
AC556
AC557
AC558
AC559
AC560
AC561
AC562
AC563
AC564
AC565
AC566
AC567
AC568
AC569
AC570
AC571
AC572
AC573
AC574
AC575
AC576
AC577
AC578
AC579
AC580
AC581
AC582
AC583
AC584
AC585
AC586
AC587
AC588
AC589
AC590
AC591
AC592
AC593
AC594
AC595
AC596
AC597
AC598
AC599
AC600
AC601
AC602
AC603
AC604
AC605
AC606
AC607
AC608
AC609
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
19.41
3.28
3.75
7.68
5.02
18.43
5.96
6.04
8.17
6.93
51.73
63.57
30.28
28.16
30.51
34.22
3.75
4.09
36.83
13.60
27.35
28.60
18.30
11.72
0.70
0.86
1.04
2.70
7.72
8.82
6.03
6.35
21.95
30.94
21.79
6.99
3.82
7.11
0.46
3.44
6.03
1.53
1.50
2.88
9.56
36.14
2.96
8.86
6.22
12.39
6.11
2.49
3.35
3.17
161.55
0.00
0.00
10.24
4.09
8.69
44.79
68.80
68.80
12.95
15.42
14.34
15.42
14.00
6.84
10.03
14.98
22.44
23.61
7.89
8.53
22.42
53.58
93.86
13.83
31.09
101.19
118.77
68.80
102.27
37.38
45.69
74.76
30.77
310.81
216.96
600.94
4
AC610
AC611
AC612
AC613
AC614
AC615
AC616
AC617
AC618
AC619
AC620
AC621
AC622
AC623
AC624
AC625
AC626
AC627
AC628
AC629
AC630
AC631
AC632
AC633
AC634
AC635
AC636
AC637
AC638
AC639
AC640
AC641
AC642
AC643
AC644
AC645
AC646
AC647
AC648
AC649
AC650
AC651
AC652
AC653
AC654
AC655
AC656
AC657
AC658
AC659
AC660
AC661
AC662
AC663
AC664
AC665
AC666
AC667
AC668
AC669
AC670
AC671
AC672
AC673
AC674
AC675
AC676
AC677
AC678
AC679
AC680
AC681
AC682
AC683
AC686
AC687
AC688
AC689
AC690
AC691
AC692
AC693
AC694
AC695
AC696
AC697
AC698
AC699
AC701
AC702
AC703
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
8.07
8.07
8.07
8.07
8.07
10.68
8.07
5.62
5.87
38.77
48.94
8.33
9.01
8.34
9.01
8.34
6.68
6.68
7.42
6.68
6.68
6.68
6.68
6.68
7.22
6.78
6.75
6.75
6.68
6.68
8.61
6.68
16.02
6.68
5.62
9.55
8.61
8.61
5.62
5.62
5.62
5.62
5.62
6.25
5.68
5.68
5.62
5.62
28.04
47.94
21.18
41.10
43.62
14.56
16.10
13.14
12.92
15.04
14.90
38.16
38.12
41.78
74.51
67.70
2.86
8.81
2.70
2.98
2.85
3.20
2.95
3.98
29.66
4.87
3.42
2.58
6.91
1.05
1.17
1.05
0.96
1.93
3.19
3.35
15.45
14.84
11.30
11.95
3.52
3.53
3.16
AC704
AC705
AC706
AC707
AC708
AC709
AC710
AC711
AC712
AC713
AC714
AC715
AC716
AC717
AC718
AC719
AC720
AC721
AC722
AC723
AC724
AC725
AC726
AC727
AC728
AC729
AC730
AC731
AC732
AC733
AC734
AC735
AC736
AC737
AC738
AC739
AC740
AC741
AC742
AC743
AC744
AC745
AC746
AC747
AC748
AC749
AC750
AC751
AC752
AC753
AC754
AC755
AC756
AC757
AC758
AC759
AC760
AC761
AC762
AC763
AC764
AC765
AC766
AC767
AC768
AC769
AC770
AC771
AC773
AC774
AC775
AC776
AC777
AC778
AC779
AC780
AC781
AC782
AC783
AC784
AC785
AC787
AC788
AC789
AC790
AC791
AC792
AC793
AC794
AC795
AC796
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
2.86
6.05
6.10
3.07
3.28
4.78
2.34
0.92
0.97
3.71
3.74
5.85
6.89
6.12
7.26
6.89
6.53
6.11
6.89
6.89
6.19
7.96
8.47
8.61
6.62
6.89
11.42
8.25
8.61
52.29
46.74
7.71
0.99
131.43
5.21
5.83
6.09
6.91
6.71
7.06
8.30
4.90
4.66
6.17
5.73
7.41
7.95
8.01
8.58
8.70
8.28
8.29
11.57
9.53
9.25
3.91
4.42
2.33
3.78
2.41
2.85
32.99
35.64
0.79
0.64
27.79
25.74
35.90
232.47
7.55
8.09
9.12
13.45
9.14
6.38
228.00
0.11
4.99
6.89
11.63
11.35
7.18
22.45
6.89
28.35
22.67
7.36
26.08
7.09
28.23
7.71
AC797
AC798
AC799
AC800
AC801
AC802
AC803
AC804
AC805
AC807
AC808
AC809
AC810
AC811
AC812
AC813
AC814
AC815
AC816
AC817
AC818
AC820
AC821
AC822
AC823
AC824
AC825
AC826
AC827
AC828
AC829
AC830
AC831
AC832
AC833
AC834
AC835
AC836
AC837
AC838
AC839
AC840
AC841
AC842
AC843
AC844
AC845
AC846
AC847
AC848
AC849
AC850
AC851
AC852
AC853
AC854
AC855
AC856
AC857
AC858
AC859
AC860
AC861
AC862
AC863
AC864
AC865
AC866
AC867
AC868
AC869
AC870
AC871
AC872
AC873
AC874
AC875
AC876
AC877
AC878
AC879
AC880
AC881
AC882
AC883
AC884
AC885
AC886
AC887
AC888
AC889
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
7.71
7.57
39.68
8.25
8.95
7.30
7.23
10.33
6.06
48.62
14.52
117.42
144.62
22.31
61.56
1.27
1.85
1.64
1.85
2.63
7.06
2.46
3.03
2.83
5.40
20.52
45.69
45.69
17.51
18.34
4,856.29
20.63
5.70
12.54
18.24
133.38
133.38
102.60
141.59
119.02
11.40
24.62
138.51
152.36
100.38
305.41
26.27
55.87
99.56
38.99
15.22
1.47
2.19
3.24
4.01
42.73
241.58
241.58
184.44
163.66
153.42
13.11
13.52
519.61
11.75
14.10
14.34
14.10
14.10
15.23
14.10
14.10
14.10
14.10
14.10
14.10
14.10
15.23
15.23
15.23
15.23
7.48
5.53
8.07
3.12
193.33
65.63
18.24
620.16
55.06
113.58
AC890
AC891
AC892
AC893
AC894
AC895
AC896
AC897
AC898
AC899
AC900
AC901
AC902
AC903
AC904
AC905
AC906
AC907
AC908
AC909
AC910
AC911
AC912
AC913
AC914
AC915
AC916
AC917
AC918
AC919
AC920
AC921
AC922
AC923
AC924
AC925
AC926
AC927
AC928
AC929
AC930
AC931
AC932
AC933
AC934
AC935
AC936
AC937
AC938
AC939
AC940
AC941
AC942
AC943
AC944
AC946
AC947
AC948
AC949
AC950
AC951
AC952
AC953
AC954
AC955
AC956
AC957
AC958
AC959
AC960
AC961
AC962
AC963
AC964
AC965
AC966
AC967
AC968
AC969
AC970
AC971
AC972
AC973
AC974
AC975
AC976
AC977
AC978
AC979
AC980
AC981
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
230.47
71.82
30.78
22.80
171.96
77.11
5.12
13.57
28.00
18.05
6.86
16.51
42.97
41.46
69.65
74.03
74.03
8.60
202.22
3.42
7.98
7.68
7.68
21.76
16.94
15.05
126.20
9.28
326.03
2.74
3.42
3.42
2.91
5.75
5.84
5.84
5.84
48.85
5.70
0.86
3.42
0.44
0.86
0.62
0.62
0.75
1.71
0.86
2.78
3.08
3.42
5.02
11.40
26.27
11.40
0.51
0.41
0.51
70.86
75.72
15.96
21.66
3,348.16
11.06
42.93
5.02
200.22
184.22
190.70
230.87
199.09
321.90
193.36
193.36
399.18
499.88
259.35
780.60
172.76
143.01
143.01
199.09
199.09
192.73
169.47
161.89
195.77
240.53
88.09
159.61
134.43
AC982
AC983
AC984
AC985
AC986
AC987
AC988
AC989
AC990
AC991
AC992
AC993
AC994
AC995
AC996
AC997
AC998
AC999
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
176.83
35.36
45.33
7.59
912.65
797.27
752.81
240.21
373.58
488.00
701.74
904.12
531.50
1,273.96
701.93
5.02
4.37
22.01
AD001
AD002
AD003
AD004
AD005
AD006
AD007
AD008
AD009
AD010
AD011
AD012
AD013
AD014
AD015
AD016
AD017
AD018
AD019
AD020
AD021
AD022
AD023
AD024
AD025
AD026
AD027
AD028
AD029
AD030
AD031
AD032
AD033
AD034
AD035
AD036
AD037
AD038
AD039
AD040
AD041
AD042
AD043
AD044
AD045
AD046
AD047
AD048
AD049
AD050
AD051
AD052
AD053
AD054
AD055
AD056
AD057
AD058
AD059
AD060
AD061
AD062
AD063
AD064
AD065
AD066
AD067
AD068
AD069
AD070
AD071
AD072
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
73.02
68.99
69.55
11.92
64.58
13.34
12.38
22.04
20.77
70.86
10.67
17.68
12.85
8.57
38.10
17.36
71.32
18.98
3.34
3.40
3.43
3.75
5.71
8.95
9.98
9.63
12.05
14.46
19.62
1.03
1.03
3.34
3.34
3.55
3.55
3.43
4.01
3.75
3.74
3.75
4.53
4.99
5.19
15.42
15.42
15.42
15.42
15.42
2.37
2.63
6.73
239.45
25.01
989.36
16.88
16.99
25.84
14.81
14.79
14.65
300.66
6.48
6.48
68.34
6.48
68.34
6.48
68.34
71.82
3.23
33.79
1.09
AD073
AD074
AD075
AD076
AD077
AD078
AD079
AD080
AD081
AD082
AD083
AD084
AD085
AD086
AD087
AD088
AD089
AD090
AD091
AD092
AD093
AD094
AD095
AD096
AD097
AD098
AD099
AD100
AD101
AD102
AD103
AD104
AD105
AD106
AD107
AD108
AD109
AD110
AD111
AD112
AD113
AD114
AD115
AD116
AD117
AD118
AD119
AD120
AD121
AD122
AD123
AD124
AD125
AD126
AD127
AD128
AD129
AD130
AD131
AD132
AD133
AD134
AD135
AD136
AD137
AD138
AD139
AD140
AD141
AD142
AD143
AD144
AD145
AD146
AD147
AD148
AD149
AD150
AD151
AD152
AD153
AD154
AD155
AD156
AD157
AD158
AD159
AD160
AD161
AD162
AD163
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
8.61
5.68
8.61
0.72
5.62
0.72
5.62
19.45
5.62
5.13
4.64
4.64
3.31
3.42
2.39
2.74
2.74
3.65
2.05
2.74
2.96
2.74
2.05
3.42
9.12
11.97
8.57
8.34
83.22
32.51
3.17
2.29
3.17
5.46
16.99
3.53
3.25
2.42
4.31
5.65
5.04
5.13
71.32
2.29
3.60
3.20
3.60
3.60
4.32
5.04
4.92
11.38
14.25
13.34
14.93
3.42
2.74
2.74
2.96
3.99
5.02
4.56
4.56
4.56
5.02
5.02
5.70
5.02
5.02
4.56
4.56
5.02
5.70
4.56
6.84
7.98
20.41
9.12
9.23
0.11
0.05
0.32
39.50
15.96
3.21
2.87
2.87
2.87
2.87
2.87
2.87
AD164
AD165
AD166
AD167
AD168
AD169
AD170
AD171
AD172
AD173
AD174
AD175
AD176
AD177
AD178
AD179
AD180
AD181
AD184
AD185
AD186
AD187
AD188
AD189
AD190
AD191
AD192
AD193
AD194
AD195
AD196
AD197
AD198
AD199
AD200
AD201
AD202
AD203
AD204
AD205
AD206
AD207
AD208
AD209
AD210
AD211
AD212
AD213
AD214
AD215
AD216
AD217
AD218
AD219
AD220
AD221
AD222
AD223
AD224
AD225
AD226
AD227
AD228
AD229
AD230
AD231
AD232
AD233
AD234
AD235
AD236
AD237
AD238
AD239
AD240
AD241
AD242
AD243
AD244
AD245
AD246
AD247
AD248
AD249
AD250
AD251
AD252
AD253
AD254
AD255
AD256
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
2.87
53.04
289.38
10.65
20.55
3.42
4.26
1.71
2.05
2.05
2.57
2.74
3.42
3.42
3.42
3.42
3.42
3.42
5.32
8.89
8.89
8.89
6.61
26.37
26.37
52.75
67.35
43.43
50.00
6.86
81.48
37.60
7.14
99.29
29.72
29.72
29.72
29.72
19.10
42.41
42.41
42.41
42.41
32.62
32.62
33.73
33.73
23.94
28.59
23.94
23.94
23.94
1.71
3.42
3.42
2.74
2.51
2.85
5.68
3.23
15.96
15.96
1.20
10.88
20.12
1.88
112.86
16.83
32.73
32.71
32.71
36.42
35.86
30.78
11.63
32.64
27.49
31.68
15.96
22.57
73.87
510.46
44.31
4.49
21.23
20.33
2.60
10.81
0.96
1.13
1.13
5
AD257
AD258
AD259
AD260
AD261
AD262
AD263
AD264
AD265
AD266
AD267
AD268
AD269
R
R
R
R
R
R
R
R
R
R
R
R
R
1.13
1.13
1.13
3.72
3.72
28.19
13.22
3.75
214.18
44.31
69.02
66.61
66.48
BB007 R 145.77
DB001
DB003
DB017
DB018
DB019
DB020
DB021
DB022
DB023
DB024
DB025
DB026
DB027
DB028
DB029
DB030
DB031
DB032
DB033
DB034
DB035
DB036
DB037
DB038
DB039
DB040
DB041
DB042
DB043
DB044
DB045
DB046
DB047
DB048
DB049
DB050
DB051
DB052
DB053
DB054
DB055
DB056
DB057
DB058
DB059
DB060
DB061
DB062
DB063
DB064
DB065
DB066
DB067
DB068
DB069
DB070
DB071
DB072
DB073
DB074
DB075
DB076
DB077
DB078
DB079
DB080
DB081
DB082
DB083
DB084
DB085
DB086
DB087
DB088
DB089
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
8.23
7.98
8.17
7.25
1.04
0.14
0.09
0.14
0.14
0.14
0.09
0.09
0.14
0.09
0.09
0.14
0.14
0.09
0.14
0.18
0.09
0.09
0.14
0.14
0.14
0.09
0.09
0.14
0.08
0.07
0.14
0.18
0.14
0.07
0.09
0.09
0.14
0.07
0.07
0.07
0.14
0.06
0.09
0.07
0.09
0.14
0.09
0.09
0.07
0.15
0.14
0.09
0.09
0.07
0.09
0.08
0.07
0.07
0.14
0.14
0.14
0.07
0.14
0.09
0.09
0.14
0.09
0.09
0.14
0.09
0.14
0.14
0.09
0.14
0.14
DB090
DB091
DB092
DB093
DB094
DB095
DB096
DB097
DB098
DB099
DB100
DB101
DB102
DB103
DB104
DB105
DB110
DB111
DB112
DB113
DB114
DB115
DB116
DB117
DB118
DB119
DB120
DB121
DB122
DB123
DB124
DB125
DB126
DB127
DB128
DB129
DB130
DB131
DB132
DB133
DB134
DB135
DB136
DB137
DB138
DB139
DB140
DB141
DB142
DB143
DB144
DB145
DB146
DB147
DB148
DB149
DB150
DB151
DB152
DB153
DB154
DB155
DB156
DB157
DB158
DB159
DB160
DB161
DB162
DB163
DB164
DB165
DB166
DB167
DB168
DB169
DB170
DB171
DB172
DB173
DB174
DB175
DB176
DB177
DB178
DB179
DB180
DB181
DB182
DB183
DB184
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0.14
0.09
0.09
0.14
0.09
0.14
0.09
0.14
0.09
0.09
0.09
0.14
0.14
0.09
0.14
0.14
0.68
0.41
0.46
0.46
0.46
0.51
0.52
0.46
0.62
0.52
0.57
0.46
0.73
0.52
0.46
0.71
0.46
0.55
0.68
0.41
0.41
0.46
0.46
0.46
0.55
2.74
2.62
3.42
2.86
2.86
2.39
2.39
2.86
2.86
2.64
2.46
2.05
2.86
2.05
2.86
2.80
2.74
4.41
3.03
2.46
3.18
3.00
3.03
3.02
3.01
3.04
3.27
3.02
3.01
3.01
2.44
3.01
3.01
2.99
3.03
3.35
2.77
2.77
3.29
2.49
0.23
0.35
0.34
0.23
0.34
0.23
0.23
0.23
0.34
0.34
DB185
DB186
DB187
DB188
DB189
DB190
DB191
DB192
DB193
DB194
DB195
DB196
DB197
DB198
DB199
DB200
DB201
DB202
DB203
DB204
DB205
DB206
DB207
DB208
DB209
DB210
DB211
DB212
DB213
DB214
DB215
DB216
DB217
DB218
DB219
DB220
DB221
DB222
DB223
DB224
DB236
DB238
DB239
DB240
DB244
DB245
DB246
DB247
DB251
DB252
DB253
DB255
DB256
DB257
DB258
DB259
DB260
DB261
DB262
DB263
DB264
DB265
DB266
DB267
DB268
DB269
DB270
DB271
DB272
DB273
DB274
DB275
DB276
DB277
DB278
DB279
DB280
DB281
DB282
DB283
DB284
DB285
DB286
DB287
DB288
DB289
DB290
DB291
DB292
DB293
DB294
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0.34
0.34
0.34
0.34
0.34
0.41
0.35
0.34
0.23
0.34
0.34
0.34
0.34
0.46
0.57
0.63
0.87
0.79
2.78
2.17
1.95
3.34
6.81
2.39
2.51
0.50
0.71
0.62
2.74
5.75
0.92
2.74
0.91
0.58
0.99
4.45
5.87
4.79
2.85
3.42
0.73
0.27
0.05
0.05
2.21
5.99
1.40
6.95
3.42
11.09
2.92
1.37
2.88
2.14
1.79
0.86
0.86
1.39
1.61
1.61
1.16
0.86
1.56
1.45
2.86
2.70
2.53
2.91
3.03
3.97
1.30
5.05
2.05
4.61
3.35
2.36
2.44
9.15
6.84
8.64
14.71
1.88
3.15
2.50
5.84
3.99
38.82
5.93
15.85
1.71
3.25
DB295
DB296
DB297
DB298
DB299
DB300
DB301
DB302
DB303
DB304
DB305
DB306
DB307
DB308
DB309
DB311
DB312
DB313
DB314
DB315
DB316
DB317
DB318
DB319
DB320
DB321
DB322
DB323
DB324
DB325
DB326
DB327
DB328
DB329
DB330
DB331
DB332
DB333
DB334
DB335
DB336
DB337
DB338
DB339
DB340
DB341
DB342
DB343
DB344
DB345
DB346
DB347
DB348
DB349
DB350
DB351
DB352
DB353
DB354
DB355
DB356
DB357
DB358
DB359
DB360
DB361
DB362
DB363
DB364
DB365
DB366
DB367
DB368
DB369
DB370
DB371
DB372
DB373
DB374
DB375
DB376
DB377
DB378
DB379
DB380
DB381
DB382
DB383
DB384
DB385
DB386
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
3.04
3.61
3.19
3.24
3.24
2.51
3.01
3.25
1.08
6.84
1.72
0.83
1.05
3.92
1.19
0.68
0.78
0.41
0.92
0.81
2.39
2.05
2.05
2.05
2.39
2.05
2.39
2.05
2.05
2.74
2.39
2.05
3.20
2.64
2.05
2.05
2.39
2.27
2.05
2.64
2.39
2.55
3.42
2.39
2.05
2.39
2.05
2.05
2.74
2.05
2.05
2.39
0.68
0.58
0.55
0.68
0.68
0.68
0.51
0.68
0.68
0.58
0.55
0.48
0.48
0.46
0.52
0.52
0.46
0.52
0.51
0.68
0.46
0.46
0.68
0.46
0.38
0.41
0.46
0.38
0.51
0.48
0.58
0.48
0.46
0.46
0.46
0.38
0.55
0.46
0.46
DB387
DB388
DB389
DB390
DB391
DB392
DB393
DB394
DB395
DB396
DB397
DB398
DB399
DB401
DB402
DB403
DB404
DB405
DB406
DB407
DB408
DB410
DB411
DB412
DB413
DB414
DB415
DB416
DB417
DB418
DB419
DB420
DB421
DB422
DB423
DB424
DB425
DB426
DB427
DB428
DB429
DB430
DB431
DB432
DB433
DB434
DB435
DB436
DB437
DB438
DB439
DB440
DB441
DB442
DB443
DB444
DB445
DB446
DB447
DB448
DB451
DB452
DB453
DB454
DB456
DB457
DB458
DB459
DB460
DB461
DB462
DB463
DB464
DB465
DB466
DB467
DB468
DB469
DB470
DB472
DB473
DB474
DB475
DB476
DB477
DB478
DB479
DB480
DB481
DB482
DB483
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0.46
0.46
0.46
0.48
0.48
0.71
0.48
0.48
0.48
1.71
1.40
2.26
1.27
0.82
3.88
4.56
11.06
2.42
3.83
3.21
4.51
0.86
2.41
2.47
2.42
2.44
1.05
1.43
0.86
1.32
0.86
0.86
0.86
1.78
0.86
0.86
0.86
0.86
0.86
1.90
0.86
0.86
0.86
0.86
0.86
1.23
0.86
2.26
1.90
0.86
1.03
0.86
0.86
0.86
1.90
0.86
0.86
0.86
0.86
5.77
1.13
10.26
11.53
11.86
15.66
21.44
4.10
2.55
6.95
5.13
7.27
1.54
2.13
7.98
12.75
11.40
9.12
13.68
14.50
18.29
2.54
3.20
3.31
3.20
3.41
2.92
2.74
2.36
7.24
3.31
2.75
DB484
DB485
DB486
DB487
DB489
DB490
DB491
DB492
DB493
DB495
DB496
DB497
DB498
DB499
DB500
DB501
DB502
DB503
DB504
DB505
DB507
DB508
DB509
DB510
DB511
DB512
DB513
DB514
DB515
DB516
DB517
DB519
DB520
DB521
DB522
DB523
DB524
DB525
DB526
DB527
DB528
DB529
DB531
DB532
DB533
DB534
DB535
DB536
DB537
DB538
DB539
DB540
DB541
DB543
DB544
DB545
DB546
DB547
DB548
DB549
DB550
DB551
DB552
DB553
DB554
DB555
DB556
DB557
DB558
DB559
DB560
DB561
DB562
DB563
DB564
DB565
DB566
DB567
DB576
DB577
DB578
DB579
DB581
DB582
DB583
DB584
DB585
DB586
DB587
DB588
DB589
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
2.82
2.85
2.39
7.46
3.27
2.33
4.72
8.55
4.79
4.33
2.85
3.53
2.96
3.19
2.64
3.88
2.51
3.76
4.45
5.70
2.96
3.99
3.09
3.65
3.88
3.76
4.34
3.33
3.88
4.33
3.14
3.33
3.65
3.88
3.88
3.03
4.10
3.65
3.31
4.56
3.42
2.51
3.76
4.56
3.88
3.03
3.09
4.10
4.10
4.10
3.31
3.42
4.56
3.19
3.31
4.33
4.10
2.74
4.10
4.51
1.88
6.27
2.37
9.48
8.25
14.41
9.44
3.65
6.73
11.30
1.52
2.15
1.80
2.23
2.03
2.62
3.39
3.84
0.86
1.56
0.68
2.50
3.76
3.31
4.31
2.96
3.31
3.76
4.51
3.42
3.31
DB590
DB591
DB592
DB593
DB594
DB595
DB596
DB597
DB598
DB599
DB600
DB601
DB602
DB603
DB604
DB605
DB606
DB607
DB608
DB609
DB610
DB611
DB612
DB613
DB614
DB615
DB616
DB617
DB618
DB619
DB620
DB621
DB622
DB623
DB624
DB625
DB626
DB627
DB628
DB629
DB630
DB631
DB632
DB633
DB634
DB635
DB636
DB637
DB638
DB639
DB640
DB641
DB642
DB643
DB644
DB645
DB646
DB647
DB648
DB650
DB651
DB652
DB653
DB654
DB655
DB656
DB657
DB658
DB659
DB660
DB661
DB662
DB663
DB664
DB665
DB666
DB667
DB668
DB669
DB670
DB671
DB672
DB673
DB674
DB675
DB676
DB677
DB678
DB679
DB680
DB681
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
4.79
3.31
2.96
3.76
3.01
3.31
2.96
3.76
2.96
2.76
3.42
2.96
3.42
4.22
3.19
5.47
2.96
2.96
4.79
5.93
2.96
3.76
4.33
4.10
3.76
2.51
2.39
3.37
2.67
2.44
2.67
2.68
2.76
2.69
2.70
3.27
2.76
2.94
2.55
3.26
2.69
0.66
1.43
2.74
2.74
2.74
3.36
3.09
3.19
2.74
2.74
2.74
3.09
3.19
2.74
2.74
3.63
3.45
3.37
36.22
4.74
7.09
8.57
3.27
2.68
2.83
2.83
3.07
2.67
2.88
3.00
2.70
2.74
2.69
2.98
2.87
2.45
3.16
3.03
3.01
3.10
3.09
3.11
3.11
3.09
3.09
3.09
3.11
3.09
5.71
6.05
6
DB682
DB683
DB684
DB685
DB686
DB687
DB697
DB698
DB699
DB700
DB701
DB702
DB703
DB704
DB705
DB706
DB707
DB708
DB709
DB710
DB711
DB712
DB713
DB714
DB715
DB716
DB717
DB718
DB719
DB720
DB721
DB722
DB723
DB724
DB725
DB726
DB728
DB729
DB730
DB731
DB732
DB734
DB735
DB736
DB737
DB738
DB739
DB740
DB741
DB742
DB743
DB745
DB746
DB747
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
5.40
6.99
5.70
8.00
10.84
11.56
1.03
3.09
3.18
11.40
14.82
12.73
10.97
10.97
11.25
10.26
6.38
10.26
10.97
12.96
11.40
13.00
9.92
14.82
12.26
12.22
11.40
18.07
13.45
9.92
14.30
9.92
13.00
9.12
11.40
10.83
7.98
25.55
34.88
18.24
32.38
5.93
0.68
26.68
32.65
5.13
3.99
11.29
10.70
11.40
0.68
0.23
9.72
7.01
EB003
EB004
EB018
EB019
EB021
EB022
EB023
EB024
EB025
EB026
EB027
EB028
EB029
EB030
EB032
EB033
EB035
EB036
EB037
EB040
EB041
EB042
EB043
EB044
EB045
EB046
EB047
EB048
EB049
EB050
EB051
EB052
EB053
EB054
EB055
EB056
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
40.05
1.85
20.29
20.29
20.29
22.98
20.29
21.66
22.57
18.01
20.29
22.57
20.29
20.29
38.58
57.46
93.37
92.13
94.19
0.07
0.07
0.07
0.07
0.07
0.11
0.07
0.07
0.07
0.07
0.07
0.07
0.11
0.09
0.16
0.11
0.11
EB057
EB058
EB059
EB060
EB061
EB062
EB063
EB064
EB065
EB066
EB067
EB068
EB069
EB070
EB071
EB072
EB073
EB074
EB075
EB076
EB077
EB078
EB079
EB080
EB081
EB082
EB083
EB084
EB085
EB086
EB087
EB088
EB089
EB090
EB091
EB092
EB093
EB094
EB095
EB096
EB097
EB098
EB099
EB100
EB101
EB102
EB103
EB104
EB105
EB106
EB107
EB108
EB109
EB110
EB111
EB112
EB113
EB114
EB115
EB116
EB117
EB118
EB119
EB120
EB121
EB122
EB123
EB124
EB125
EB126
EB127
EB128
EB129
EB131
EB132
EB133
EB134
EB140
EB141
EB142
EB143
EB155
EB156
EB157
EB158
EB159
EB160
EB162
EB164
EB165
EB166
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0.07
0.11
0.11
0.11
0.11
0.16
0.11
0.11
0.09
0.16
0.11
0.09
0.11
0.11
0.09
0.11
0.09
0.11
0.07
0.07
0.07
0.11
0.11
0.07
0.11
0.09
0.11
0.07
0.07
0.09
0.11
0.07
0.09
0.11
0.09
0.07
0.09
0.11
0.09
0.07
0.07
0.09
0.11
0.11
0.11
0.11
0.11
0.09
0.09
0.09
0.11
0.09
0.11
0.07
0.09
0.09
0.07
0.11
0.11
0.09
0.07
0.11
0.07
0.11
0.07
0.07
0.07
0.09
0.09
0.09
2.74
0.41
25.89
20.29
49.25
50.48
34.88
4.31
5.02
48.51
18.14
1.61
3.80
1.12
2.50
2.37
16.53
97.07
73.15
3.36
3.36
EB167
EB168
EB169
EB170
EB171
EB172
EB174
EB175
EB176
EB177
EB178
EB179
EB180
EB181
EB182
EB183
EB184
EB186
EB187
EB188
EB189
EB192
EB193
EB194
EB195
EB196
EB197
EB201
EB210
EB212
EB213
EB214
EB215
EB216
EB217
EB220
EB221
EB222
EB223
EB224
EB225
EB228
EB229
EB230
EB234
EB235
EB236
EB239
EB247
EB248
EB250
EB251
EB252
EB253
EB254
EB256
EB257
EB258
EB263
EB264
EB265
EB266
EB267
EB276
EB281
EB282
EB298
EB299
EB301
EB302
EB303
EB304
EB305
EB306
EB307
EB308
EB309
EB310
EB311
EB314
EB315
EB316
EB317
EB319
EB321
EB322
EB325
EB326
EB327
EB328
EB329
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
23.16
49.56
84.13
171.86
1.54
1.54
2.36
6.04
5.70
5.02
19.06
31.91
5.15
15.62
17.33
18.13
16.07
27.70
19.24
13.77
6.09
0.87
0.93
0.13
1.15
118.30
0.14
0.15
68.43
119.02
76.74
96.75
57.05
150.80
217.69
86.16
81.54
23.78
42.80
190.63
0.00
5.02
3.08
20.95
27.41
27.41
27.41
27.41
27.41
27.41
27.41
27.41
27.41
27.41
27.41
12.46
12.81
12.94
18.31
25.00
24.62
83.11
151.03
9.80
7.98
5.24
3.39
2.91
3.21
3.01
3.01
3.25
3.25
1.85
2.19
0.44
2.19
150.10
15.85
4.79
4.79
14.68
15.30
0.52
2.87
2.01
2.79
1.97
2.17
3.18
4.42
EB333
EB334
EB340
EB341
EB345
EB346
EB348
EB349
EB350
EB351
EB352
EB354
EB355
EB356
EB357
EB358
EB359
EB360
EB402
EB403
EB404
EB407
EB408
EB409
EB412
EB413
EB415
EB416
EB418
EB420
EB421
EB422
EB423
EB426
EB427
EB428
EB429
EB430
EB431
EB432
EB433
EB436
EB437
EB523
EB524
EB525
EB528
EB530
EB532
EB535
EB548
EB549
EB550
EB551
EB552
EB554
EB555
EB557
EB559
EB560
EB561
EB562
EB570
EB572
EB579
EB582
EB583
EB585
EB589
EB590
EB591
EB592
EB593
EB595
EB596
EB597
EB599
EB600
EB601
EB602
EB603
EB604
EB605
EB606
EB607
EB608
EB609
EB610
EB611
EB616
EB618
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
3.98
4.78
28.63
51.52
31.52
2.44
17.28
2.05
10.15
28.60
0.68
234.32
103.35
286.76
100.90
63.52
130.91
46.76
4.90
323.24
406.23
16.23
18.63
19.72
19.45
14.51
5.43
4.89
1.88
2.92
5.38
2.74
2.77
3.10
2.74
55.38
1.53
2.99
3.66
0.73
0.73
45.44
109.73
90.92
57.66
123.56
8.25
27.94
113.27
118.20
23.03
7.33
5.78
9.09
89.99
61.56
113.27
85.36
118.20
108.35
141.18
61.56
135.74
41.04
21.60
33.19
23.27
12.54
50.57
50.57
50.57
81.69
73.92
50.57
58.36
66.13
50.57
58.36
128.39
186.74
50.57
50.57
66.13
62.24
167.30
70.03
81.69
50.57
196.08
187.23
102.55
EB619
EB620
EB621
EB622
EB623
EB624
EB625
EB627
EB628
EB629
EB630
EB631
EB633
EB635
EB636
EB637
EB638
EB639
EB640
EB641
EB642
EB643
EB644
EB645
EB646
EB647
EB648
EB649
EB650
EB653
EB654
EB655
EB656
EB657
EB658
EB659
EB663
EB668
EB670
EB671
EB672
EB673
EB674
EB675
EB676
EB677
EB678
EB681
EB682
EB683
EB684
EB685
EB686
EB687
EB688
EB689
EB690
EB691
EB692
EB695
EB697
EB698
EB701
EB702
EB704
EB706
EB709
EB710
EB711
EB712
EB713
EB714
EB715
EB716
EB717
EB718
EB719
EB720
EB721
EB722
EB723
EB724
EB726
EB727
EB728
EB729
EB730
EB731
EB732
EB733
EB734
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
77.81
66.13
108.93
85.59
601.74
183.29
143.95
89.48
418.45
190.63
54.46
89.48
456.49
89.48
97.26
73.92
143.95
128.39
128.39
235.16
178.96
50.57
128.39
120.60
3.76
3.31
2.96
2.96
3.08
2.96
3.88
3.31
4.51
5.93
3.42
5.02
7.52
4.56
2.74
2.74
2.74
2.74
3.76
2.96
3.19
3.88
2.74
3.76
3.08
3.76
3.31
4.22
2.74
2.69
5.45
13.22
12.52
2.85
5.24
78.59
49.25
28.73
18.58
60.53
98.50
50.38
21.24
10.92
64.13
29.86
54.23
13.22
11.29
4.67
24.42
4.51
22.80
6.61
19.05
18.14
15.18
57.46
61.72
9.72
22.61
23.62
16.07
9.76
22.47
64.99
11.40
EB735
EB737
EB738
EB739
EB740
EB741
EB742
EB743
EB744
EB745
EB746
EB748
EB749
EB750
EB751
EB752
EB753
EB754
EB755
EB756
EB757
EB758
EB759
EB760
EB761
EB762
EB763
EB764
EB765
EB766
EB767
EB768
EB769
EB771
EB772
EB773
EB774
EB775
EB776
EB778
EB779
EB780
EB781
EB782
EB783
EB784
EB785
EB786
EB787
EB788
EB789
EB790
EB791
EB792
EB793
EB794
EB796
EB797
EB798
EB799
EB800
EB801
EB802
EB803
EB806
EB807
EB808
EB810
EB811
EB813
EB816
EB818
EB819
EB820
EB821
EB822
EB823
EB834
EB836
EB838
EB839
EB840
EB841
EB842
EB843
EB844
EB845
EB846
EB847
EB848
EB849
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
8.89
7.98
7.75
6.61
4.33
2.84
5.38
21.09
4.51
3.65
3.65
8.09
8.09
2.92
3.19
5.02
41.69
17.10
3.19
1.78
2.54
2.26
2.39
2.51
1.57
2.74
3.42
8.90
8.44
9.07
1.50
2.38
2.22
2.51
2.39
4.33
1.71
1.44
1.81
8.63
8.21
9.07
14.82
33.44
2.39
2.74
4.47
2.22
5.61
11.17
1.71
2.70
3.35
5.06
4.10
6.04
1.68
2.02
2.36
8.89
9.69
29.74
45.35
34.78
45.34
41.72
53.90
84.82
15.66
1.20
7.41
15.73
2.69
4.33
36.94
9.94
31.27
86.18
119.22
133.38
185.88
97.89
159.51
2.05
21.89
48.62
82.47
153.49
114.42
40.56
488.28
EB850
EB858
EB861
EB862
EB865
EB867
EB868
EB870
EB871
EB872
EB873
EB874
EB876
EB877
EB878
EB879
EB880
EB881
EB882
EB883
EB884
EB886
EB887
EB888
EB889
EB890
EB891
EB892
EB893
EB895
EB896
EB897
EB898
EB899
EB900
EB901
EB902
EB903
EB904
EB905
EB906
EB907
EB908
EB909
EB910
EB911
EB912
EB914
EB920
EB921
EB924
EB925
EB926
EB927
EB928
EB929
EB930
EB931
EB932
EB934
EB936
EB937
EB941
EB942
EB955
EB969
EB970
EB971
EB977
EB988
EB997
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
3,445.73
54.33
3.39
2.62
3.34
2.92
2.27
2.93
3.29
2.80
3.45
2.45
242.99
226.22
3.09
3.18
54.13
2.30
2.28
7.57
10.99
3.23
20.93
29.57
142.03
210.67
3.52
3.43
2.83
6.73
9.03
2.36
1.20
21.27
15.71
11.13
9.92
8.64
13.50
6.35
26.06
6.84
43.43
46.02
30.78
52.33
36.02
10.24
2.96
86.18
334.53
109.04
6.34
4.33
0.81
0.58
8.48
40.07
2.85
27.19
0.95
16.84
2.57
2.44
19.38
10.99
4.56
6.61
2.39
13.20
3.19
FB017
FB018
FB046
FB047
FB052
FB053
FB054
FB055
FB056
FB057
FB058
FB059
FB061
FB062
FB063
FB064
FB065
FB066
FB067
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
43.43
793.44
24.60
160.06
3.99
1.13
2.71
0.75
0.44
1.61
0.49
3.34
0.38
0.48
1.72
2.85
0.93
1.48
0.17
7
FB069
FB076
FB077
FB078
FB079
FB080
FB081
FB085
FB086
FB087
FB088
FB089
FB090
FB091
FB092
FB093
FB094
FB095
FB096
FB097
FB098
FB099
FB100
FB101
FB102
FB103
FB104
FB105
FB106
FB107
FB108
FB109
FB110
FB114
FB116
FB117
FB118
FB119
FB120
FB124
FB125
FB127
FB128
FB130
FB131
FB132
FB134
FB135
FB136
FB137
FB138
FB139
FB140
FB141
FB142
FB143
FB144
FB145
FB146
FB147
FB148
FB149
FB150
FB151
FB152
FB154
FB157
FB158
FB159
FB160
FB161
FB162
FB163
FB164
FB165
FB166
FB167
FB168
FB169
FB170
FB181
FB182
FB184
FB185
FB186
FB187
FB189
FB190
FB192
FB193
FB196
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0.25
3.26
51.73
14.87
13.73
13.73
13.73
499.37
350.12
430.13
790.43
273.47
104.65
6.19
6.62
87.67
61.71
183.31
312.43
49.52
32.09
46.53
26.31
31.67
70.22
190.57
4.61
243.85
68.23
73.55
201.53
132.35
75.08
291.97
76.09
20.70
65.36
327.17
641.68
500.07
4.17
6.61
9.42
3.12
5.12
8.23
2.10
2.13
2.36
3.02
4.07
3.42
5.56
2.09
2.69
2.60
3.36
2.64
3.37
13.19
3.42
4.29
22.34
51.30
3.31
10.94
2.51
2.74
4.10
1.16
0.55
1.03
0.65
0.75
0.68
0.96
0.68
0.64
0.68
3.01
3.42
4.10
6.61
3.31
4.67
5.70
29.14
23.02
20.29
21.55
36.83
FB197
FB198
FB199
FB200
FB203
FB204
FB205
FB206
FB207
FB210
FB211
FB212
FB213
FB214
FB215
FB216
FB217
FB218
FB220
FB221
FB222
FB223
FB224
FB225
FB226
FB227
FB228
FB230
FB235
FB239
FB241
FB242
FB243
FB244
FB246
FB247
FB257
FB266
FB267
FB268
FB280
FB323
FB324
FB326
FB327
FB328
FB330
FB332
FB333
FB334
FB335
FB336
FB337
FB338
FB339
FB342
FB394
FB395
FB396
FB397
FB398
FB399
FB400
FB401
FB402
FB403
FB404
FB405
FB408
FB414
FB420
FB421
FB424
FB425
FB426
FB427
FB451
FB453
FB459
FB460
FB461
FB464
FB465
FB466
FB467
FB468
FB469
FB471
FB472
FB474
FB475
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
6.61
8.89
13.27
9.03
7.98
7.52
25.65
24.42
40.63
66.34
52.53
4.56
4.56
5.02
5.36
0.96
1.30
0.68
7.87
9.58
6.84
14.55
3.08
3.08
7.00
3.42
3.42
5.02
13.27
2.74
2.34
2.05
3.31
2.74
16.87
17.10
27.41
27.68
130.20
82.41
0.14
2.02
2.05
1.04
1.48
1.19
1.28
0.99
1.06
1.01
1.19
0.43
0.36
0.42
1.11
38.99
35.91
45.91
87.93
97.93
73.92
91.93
79.93
171.96
65.91
65.91
241.77
19.89
0.72
1.06
1.61
1.63
29.12
31.91
2.96
7.36
363.89
97.68
7.98
6.09
51.30
37.96
24.58
11.47
18.24
4.22
51.30
5.94
3.42
2.74
5.02
FB476
FB477
FB478
FB479
FB480
FB481
FB482
FB483
FB484
FB485
FB486
FB488
FB489
FB492
FB493
FB495
FB496
FB497
FB499
FB503
FB507
FB508
FB509
FB510
FB511
FB512
FB515
FB516
FB517
FB518
FB519
FB520
FB521
FB522
FB523
FB524
FB525
FB526
FB527
FB528
FB529
FB530
FB532
FB533
FB534
FB536
FB537
FB538
FB539
FB540
FB543
FB545
FB546
FB547
FB550
FB551
FB553
FB554
FB555
FB556
FB557
FB558
FB559
FB560
FB561
FB562
FB563
FB564
FB566
FB567
FB568
FB569
FB570
FB571
FB572
FB573
FB575
FB576
FB577
FB578
FB579
FB580
FB581
FB582
FB583
FB584
FB586
FB587
FB588
FB589
FB590
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
2.05
829.92
102.91
148.26
148.26
139.54
167.44
148.26
440.19
90.40
110.09
17.97
49.58
3.72
6.41
3.60
7.81
3.97
246.24
20.29
34.68
36.73
119.02
31.81
8.89
131.12
39.46
78.03
37.75
26.52
97.77
70.45
84.43
130.85
37.75
55.78
152.43
84.43
74.76
74.76
78.03
70.45
70.45
33.06
102.34
93.66
112.56
78.03
52.65
70.45
70.45
141.35
112.40
136.57
130.85
58.31
35.00
84.43
89.31
78.03
127.12
35.61
147.76
55.78
127.12
52.65
78.03
35.00
70.45
97.22
112.40
105.77
112.56
106.07
42.68
55.87
74.76
55.78
147.76
105.77
112.40
70.45
42.68
44.53
139.55
112.56
70.45
105.77
172.38
178.09
152.43
FB591
FB592
FB593
FB594
FB595
FB596
FB597
FB598
FB600
FB601
FB603
FB604
FB605
FB606
FB607
FB609
FB610
FB613
FB614
FB615
FB616
FB617
FB618
FB619
FB620
FB621
FB622
FB623
FB624
FB625
FB626
FB627
FB628
FB629
FB630
FB631
FB632
FB633
FB634
FB635
FB636
FB637
FB638
FB639
FB640
FB641
FB642
FB643
FB644
FB645
FB646
FB647
FB648
FB649
FB650
FB651
FB653
FB654
FB655
FB656
FB657
FB658
FB659
FB660
FB661
FB662
FB663
FB664
FB665
FB666
FB667
FB668
FB669
FB670
FB671
FB672
FB673
FB674
FB675
FB676
FB677
FB678
FB679
FB680
FB681
FB682
FB683
FB684
FB686
FB690
FB691
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
63.09
122.04
112.40
42.68
88.26
84.43
70.45
70.45
84.43
84.43
70.45
93.66
172.38
42.68
117.49
26.45
122.04
42.68
51.73
58.31
141.35
28.61
23.46
27.02
23.46
23.46
26.45
23.87
25.33
25.33
25.33
33.06
23.87
25.30
26.45
23.87
23.46
70.45
59.58
88.26
69.23
152.43
23.46
70.45
89.59
105.77
123.29
15.22
200.31
106.07
42.68
189.00
70.45
23.46
52.65
74.76
70.45
188.75
178.88
175.01
58.81
63.09
45.06
97.56
74.16
32.41
59.33
75.05
63.95
83.16
67.37
43.10
69.77
68.47
61.61
93.02
127.27
141.69
81.13
52.96
130.37
101.41
74.58
53.84
88.99
81.50
90.61
100.88
192.82
289.39
127.91
FB692
FB694
FB695
FB696
FB697
FB698
FB705
FB706
FB707
FB708
FB709
FB710
FB711
FB712
FB713
FB714
FB715
FB717
FB720
FB723
FB724
FB725
FB726
FB727
FB728
FB729
FB749
FB751
FB752
FB753
FB754
FB756
FB757
FB764
FB766
FB767
FB768
FB770
FB790
FB791
FB798
FB799
FB800
FB801
FB803
FB804
FB805
FB806
FB807
FB808
FB809
FB810
FB811
FB812
FB813
FB815
FB817
FB818
FB819
FB820
FB821
FB822
FB823
FB824
FB825
FB826
FB828
FB829
FB830
FB831
FB833
FB834
FB836
FB837
FB838
FB842
FB843
FB846
FB848
FB849
FB850
FB852
FB853
FB854
FB855
FB857
FB860
FB861
FB862
FB863
FB864
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
162.03
84.30
186.45
549.89
676.07
1,446.23
1.54
2.50
2.86
2.60
2.58
2.74
3.01
3.01
3.01
3.39
78.23
558.90
11.40
70.45
1.33
51.88
82.08
60.77
40.66
30.87
3.18
0.57
0.56
2.44
2.51
6.49
7.59
6.70
4.91
7.85
2.31
2.23
6.67
6.46
9.47
26.03
21.74
12.57
11.07
29.10
9.72
11.61
13.18
12.36
14.50
13.61
24.16
28.18
47.01
47.57
14.51
17.27
22.55
12.27
16.67
18.67
15.95
11.39
17.09
253.88
219.13
216.74
0.68
1.57
3.27
19.47
9.94
4.35
3.23
6.77
5.06
4.23
17.00
4.13
5.22
7.81
12.64
2.78
3.09
10.47
4.57
3.48
7.11
13.00
35.70
FB865
FB866
FB867
FB868
FB869
FB870
FB871
FB872
FB873
FB875
FB877
FB878
FB880
FB882
FB884
FB885
FB888
FB891
FB892
FB893
FB895
FB902
FB903
FB904
FB906
FB907
FB910
FB911
FB913
FB914
FB915
FB916
FB917
FB918
FB919
FB920
FB921
FB922
FB923
FB924
FB925
FB926
FB927
FB931
FB934
FB935
FB936
FB938
FB939
FB942
FB943
FB947
FB950
FB953
FB955
FB956
FB962
FB965
FB967
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
31.40
92.13
45.14
84.54
121.89
53.25
10.32
16.01
7.06
7.16
8.15
9.02
16.70
15.55
8.94
2.69
2.69
3.20
16.34
3.20
2.83
0.59
14.44
16.86
2.79
2.06
1.46
2.34
232.69
162.21
193.61
200.00
200.00
269.77
339.54
0.34
0.39
0.41
0.43
0.38
0.59
0.80
0.80
1.37
7.64
3.40
6.63
5.53
4.63
3.21
0.72
3.58
20.38
3.27
3.27
2.47
0.86
1.16
9.87
GB149
GB150
GB151
GB152
GB154
GB156
GB157
GB158
GB159
GB162
GB164
GB166
GB169
GB171
GB172
GB174
GB176
GB177
GB178
GB179
GB182
GB184
GB186
GB189
GB190
GB191
GB192
GB194
GB195
GB196
GB198
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
2.36
13.57
1.60
3.28
43.22
5.62
3.28
5.59
5.40
2.96
6.12
8.76
5.48
24.04
0.84
3.97
20.57
6.36
48.89
21.27
26.16
18.47
2.74
2.41
2.74
13.13
22.17
404.93
127.22
2.37
123.02
GB200
GB202
GB203
GB204
GB205
GB207
GB209
GB213
GB218
GB219
GB220
GB222
GB224
GB226
GB227
GB228
GB229
GB231
GB235
GB238
GB239
GB241
GB243
GB246
GB247
GB249
GB250
GB251
GB256
GB257
GB263
GB266
GB267
GB268
GB275
GB277
GB278
GB283
GB284
GB289
GB290
GB291
GB292
GB294
GB296
GB297
GB299
GB309
GB313
GB320
GB321
GB322
GB323
GB324
GB325
GB326
GB329
GB330
GB333
GB334
GB338
GB339
GB341
GB343
GB345
GB351
GB354
GB359
GB364
GB365
GB366
GB367
GB368
GB369
GB370
GB373
GB375
GB376
GB377
GB378
GB379
GB380
GB381
GB382
GB383
GB384
GB385
GB386
GB387
GB388
GB389
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
5.51
10.69
7.16
3.48
22.12
1.16
2.74
22.25
127.22
59.30
92.13
4.56
4.61
2.29
1.79
2.37
9.55
8.87
12.28
8.62
10.26
4.42
11.29
5.56
2.67
16.71
78.80
66.98
2.39
7.55
8.53
0.89
108.35
39.81
9.38
4.10
3.57
10.26
17.10
6.19
0.34
4.61
8.85
4.61
4.42
3.42
5.29
31.86
18.31
3.83
10.94
6.06
9.60
11.25
6.82
36.24
4.56
11.16
5.49
4.26
9.04
2.90
5.79
6.83
4.38
18.76
2.36
485.72
273.60
273.60
310.08
456.00
58.68
392.80
276.48
456.00
10.40
11.98
38.22
50.66
36.07
28.26
129.18
10.17
11.29
15.85
16.32
7.84
19.49
3.67
24.97
8
GB391
GB392
GB393
GB394
GB395
GB396
GB397
GB398
GB399
GB403
GB404
GB407
GB409
GB410
GB418
GB421
GB426
GB427
GB460
GB463
GB464
GB469
GB477
GB478
GB483
GB490
GB491
GB492
GB493
GB494
GB496
GB497
GB499
GB500
GB501
GB502
GB503
GB505
GB506
GB507
GB508
GB509
GB510
GB511
GB512
GB513
GB514
GB515
GB516
GB517
GB518
GB519
GB520
GB521
GB522
GB523
GB526
GB527
GB529
GB530
GB531
GB532
GB533
GB534
GB535
GB536
GB537
GB538
GB539
GB540
GB541
GB542
GB543
GB544
GB545
GB548
GB549
GB550
GB551
GB554
GB556
GB558
GB559
GB561
GB562
GB563
GB565
GB567
GB568
GB569
GB570
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
21.71
10.58
17.10
19.49
26.78
34.17
51.69
46.59
22.47
305.41
305.41
289.92
126.13
0.68
4.22
37.24
4.42
61.79
2.92
1.47
3.42
3.41
3.21
11.02
20.66
272.49
2.62
6.34
174.29
95.03
88.24
13.68
31.51
36.97
5.13
20.83
40.62
3.23
2.62
11.05
1.97
28.16
35.84
51.89
84.68
105.58
188.10
220.64
227.68
98.50
55.61
121.58
1.36
2.15
27.41
27.41
3.09
2.47
5.11
19.97
19.03
17.12
551.75
551.75
313.00
327.70
307.67
242.17
289.38
289.38
289.38
186.36
297.43
410.57
462.11
2.30
8.84
10.18
3.42
310.08
66.11
249.89
436.49
184.59
166.11
184.59
72.79
55.64
1.95
2.15
3.39
GB571
GB572
GB574
GB575
GB576
GB577
GB578
GB580
GB581
GB582
GB583
GB584
GB585
GB586
GB587
GB588
GB589
GB590
GB591
GB592
GB593
GB594
GB595
GB596
GB597
GB598
GB599
GB600
GB601
GB602
GB603
GB604
GB605
GB606
GB607
GB608
GB609
GB610
GB611
GB612
GB613
GB614
GB616
GB617
GB618
GB619
GB620
GB621
GB622
GB623
GB624
GB625
GB626
GB627
GB628
GB629
GB630
GB631
GB632
GB633
GB634
GB635
GB636
GB637
GB638
GB639
GB640
GB641
GB642
GB643
GB644
GB645
GB646
GB647
GB648
GB649
GB650
GB651
GB652
GB654
GB658
GB659
GB660
GB661
GB662
GB663
GB664
GB665
GB666
GB668
GB669
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
16.15
105.04
41.75
215.28
1,491.09
64.39
6.36
2.74
8.73
12.80
10.09
119.36
37.02
155.31
54.80
131.67
80.20
103.44
98.19
69.89
48.07
61.89
82.38
83.07
130.92
45.19
63.68
130.92
121.71
82.63
77.38
98.18
197.00
127.98
53.90
83.07
58.72
49.09
81.62
132.73
191.91
183.92
0.36
0.51
0.51
0.68
0.72
1.20
0.78
1.03
1.00
1.37
3.19
1.37
1.13
1.54
4.56
2.05
1.44
2.05
3.42
3.42
1.65
3.42
4.61
3.42
5.70
2.74
2.06
3.42
0.46
15.73
121.28
162.22
1,714.96
136.52
86.26
104.15
80.66
14.60
698.75
227.94
82.25
45.37
342.72
2.31
41.75
3.75
22.80
3.39
3.53
GB670
GB671
GB672
GB677
GB678
GB679
GB680
GB681
GB682
GB683
GB684
GB685
GB686
GB687
GB688
GB689
GB690
GB691
GB692
GB693
GB694
GB695
GB696
GB697
GB698
GB699
GB700
GB701
GB702
GB703
GB706
GB708
GB709
GB710
GB711
GB712
GB714
GB716
GB717
GB718
GB720
GB721
GB722
GB723
GB724
GB725
GB726
GB727
GB728
GB729
GB731
GB733
GB734
GB735
GB741
GB742
GB743
GB744
GB745
GB746
GB747
GB748
GB749
GB750
GB751
GB752
GB753
GB754
GB755
GB756
GB757
GB758
GB759
GB760
GB761
GB762
GB763
GB764
GB765
GB766
GB767
GB768
GB769
GB770
GB771
GB772
GB773
GB774
GB775
GB776
GB777
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
418.19
9.28
109.88
8.88
28.73
3.39
46.20
3.31
26.68
13.79
13.38
16.40
12.26
11.26
12.35
4.94
5.16
5.57
1.93
755.79
2.37
16.76
20.49
3.36
90.70
44.19
44.61
31.03
447.30
9.55
2.58
392.60
82.43
15.58
51.33
164.68
21.27
22.80
73.20
1.13
0.76
3.28
2.63
6.86
6.46
5.39
192.99
1.74
85.48
7.48
2.52
4.38
204.15
54.17
3.28
4.95
3.77
27.46
5.53
3.17
1,271.70
219.20
105.77
112.56
88.26
70.45
55.87
178.09
215.40
33.38
106.07
70.45
141.35
69.23
35.00
143.85
178.09
16.15
45.06
55.87
188.73
42.68
97.77
117.49
197.28
70.45
84.43
74.66
84.43
106.07
106.07
GB778
GB779
GB780
GB781
GB782
GB783
GB784
GB785
GB786
GB787
GB788
GB789
GB790
GB791
GB792
GB793
GB794
GB795
GB796
GB797
GB798
GB799
GB800
GB801
GB802
GB803
GB804
GB805
GB806
GB807
GB808
GB809
GB810
GB811
GB812
GB813
GB814
GB815
GB816
GB817
GB818
GB819
GB820
GB821
GB822
GB823
GB824
GB825
GB826
GB827
GB828
GB829
GB830
GB831
GB832
GB833
GB834
GB835
GB836
GB838
GB839
GB840
GB901
GB910
GB959
GB994
GB995
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
112.40
69.23
52.65
143.85
93.66
93.53
35.00
189.00
37.75
88.26
121.16
106.07
74.66
35.00
52.65
97.77
55.87
88.26
106.07
189.00
117.49
189.00
78.03
127.12
189.72
35.61
70.45
69.23
123.29
117.49
143.85
21.14
20.77
14.10
135.90
2,672.83
113.28
7.83
7.83
10.16
10.16
100.96
6.40
6.91
10.29
1,313.94
240.08
132.02
153.47
170.85
192.32
7.90
2.71
3.34
13.74
16.19
3,545.82
1,434.66
51.52
118.58
105.99
1,554.86
37.46
30.31
2.54
1.89
222.88
GC013
GC014
GC015
GC016
GC017
GC018
GC019
GC020
GC021
GC022
GC023
GC024
GC025
GC026
GC027
GC028
GC029
GC030
GC031
GC032
GC033
GC034
GC035
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
3,503.39
386.57
7,852.08
8,866.84
2,287.00
494.24
121.28
198.76
334.89
184.77
201.34
177.99
105.47
8,123.12
3,378.62
2,241.35
1,596.97
773.15
186.72
1,855.03
144.19
86.87
106.73
GC036
GC037
GC038
GC039
GC040
GC042
GC043
GC044
GC045
GC053
GC054
GC055
GC056
GC057
GC058
GC059
GC060
GC061
GC063
GC064
GC065
GC066
GC067
GC068
GC069
GC070
GC071
GC072
GC073
GC074
GC075
GC076
GC077
GC078
GC079
GC080
GC081
GC082
GC083
GC084
GC085
GC086
GC087
GC088
GC089
GC090
GC091
GC092
GC093
GC094
GC095
GC096
GC097
GC098
GC099
GC100
GC101
GC102
GC103
GC104
GC105
GC106
GC107
GC108
GC109
GC110
GC111
GC112
GC113
GC114
GC115
GC116
GC117
GC138
GC139
GC140
GC141
GC142
GC143
GC144
GC230
GC231
GC232
GC233
GC238
GC248
GC249
GC304
GC317
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
427.39
1,141.78
156.52
126.97
872.70
189.32
402.74
838.54
133.15
303.43
189.74
517.02
416.25
255.18
152.40
144.99
588.60
284.78
308.43
192.33
141.22
133.86
190.98
201.72
243.56
190.23
105.94
473.89
54.06
55.62
270.47
146.55
177.14
349.88
119.67
162.28
205.14
354.23
188.92
329.23
280.39
137.84
1,260.93
194.15
69.30
1,437.05
1,149.70
1,057.76
290.94
92.29
185.24
364.31
1,107.49
151.85
557.89
460.85
135.50
180.11
192.40
127.36
78.92
92.60
2,115.12
261.42
166.86
67.91
236.32
420.32
463.47
382.95
463.49
382.94
360.57
132.02
139.10
132.02
132.02
133.08
155.34
64.84
117.42
124.61
124.61
117.42
163.08
123.14
117.94
116.43
18.71
HB001 R 12.77
HB015
HB016
HB019
HB020
HB021
HB022
HB023
HB024
HB025
HB026
HB028
HB029
HB030
HB031
HB032
HB033
HB034
HB035
HB038
HB039
HB040
HB041
HB042
HB043
HB044
HB045
HB046
HB047
HB048
HB049
HB050
HB051
HB052
HB053
HB054
HB055
HB056
HB057
HB058
HB059
HB060
HB061
HB062
HB063
HB064
HB065
HB066
HB067
HB068
HB069
HB070
HB071
HB072
HB073
HB074
HB075
HB076
HB077
HB078
HB079
HB080
HB081
HB082
HB083
HB084
HB085
HB086
HB087
HB088
HB089
HB090
HB091
HB092
HB093
HB094
HB097
HB098
HB099
HB100
HB101
HB103
HB104
HB105
HB106
HB107
HB108
HB109
HB110
HB111
HB112
HB113
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
12.59
37.26
7.14
4.51
6.04
4.51
14.40
3.19
3.45
2.58
3.53
3.65
0.62
3.31
11.15
3.78
2.87
3.57
4.56
2.74
12.95
0.50
5.93
3.35
10.26
8.65
3.35
8.77
8.89
10.83
7.23
3.19
0.15
0.27
1.11
2.67
0.50
0.50
0.42
0.41
0.50
0.82
0.51
0.65
0.78
0.57
0.65
0.50
0.62
0.55
0.48
0.48
2.53
2.29
0.41
0.38
0.71
0.43
0.49
0.82
4.43
16.07
15.94
3.04
2.22
2.91
5.93
3.42
3.08
8.86
14.99
14.27
12.04
17.21
10.29
37.96
28.58
21.55
2.26
3.76
2.95
3.83
3.14
2.39
3.61
4.38
4.04
4.04
2.70
3.42
1.71
HB114
HB115
HB116
HB117
HB118
HB119
HB120
HB121
HB122
HB123
HB124
HB125
HB126
HB127
HB128
HB129
HB130
HB131
HB132
HB133
HB134
HB135
HB136
HB137
HB138
HB139
HB140
HB141
HB142
HB143
HB144
HB145
HB146
HB147
HB148
HB149
HB150
HB151
HB155
HB156
HB157
HB160
HB161
HB164
HB165
HB166
HB167
HB168
HB169
HB170
HB171
HB172
HB173
HB174
HB176
HB177
HB178
HB179
HB180
HB181
HB182
HB183
HB184
HB185
HB186
HB187
HB188
HB189
HB190
HB191
HB192
HB193
HB194
HB195
HB196
HB197
HB198
HB199
HB200
HB201
HB202
HB203
HB204
HB205
HB206
HB207
HB208
HB209
HB210
HB211
HB212
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
2.98
4.88
4.29
4.09
3.85
3.35
6.20
4.56
20.98
21.58
2.66
3.41
2.88
3.75
4.10
4.89
3.65
7.84
5.23
2.74
4.37
4.25
2.85
3.89
2.85
3.41
2.74
7.11
3.31
4.17
2.50
3.42
3.42
2.92
3.37
2.74
5.47
20.93
31.43
18.01
24.62
8.21
48.22
22.34
3.01
3.03
3.03
3.01
3.03
3.01
3.34
10.17
8.87
9.84
9.90
20.27
8.84
0.46
0.41
0.38
0.41
0.46
0.41
0.46
0.66
0.48
0.82
1.54
3.45
6.41
0.62
0.48
0.36
0.57
0.48
0.46
0.51
0.68
1.20
2.36
3.08
7.06
7.98
5.92
3.60
7.59
39.71
3.28
4.82
0.49
0.71
9
HB213
HB214
HB215
HB216
HB217
HB218
HB219
HB220
HB221
HB222
HB223
HB224
HB225
HB226
HB227
HB228
HB229
HB230
HB231
HB232
HB233
HB234
HB235
HB236
HB237
HB238
HB239
HB240
HB241
HB242
HB243
HB244
HB245
HB246
HB247
HB248
HB249
HB250
HB251
HB252
HB253
HB254
HB255
HB256
HB257
HB258
HB259
HB261
HB262
HB263
HB264
HB265
HB267
HB268
HB269
HB270
HB271
HB272
HB273
HB274
HB275
HB276
HB277
HB278
HB279
HB280
HB281
HB282
HB283
HB284
HB285
HB286
HB287
HB288
HB289
HB290
HB291
HB292
HB294
HB296
HB298
HB299
HB300
HB301
HB302
HB303
HB304
HB305
HB306
HB307
HB308
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0.86
2.68
15.44
5.47
0.57
0.73
0.41
1.00
1.29
2.59
1.33
2.88
3.88
6.84
18.50
18.24
0.54
5.86
0.68
1.14
1.81
1.68
4.00
4.97
9.03
11.40
3.42
3.17
5.70
13.47
0.50
0.73
0.36
0.56
0.41
0.60
0.62
1.43
2.35
1.09
1.64
2.51
6.84
8.09
3.01
9.15
11.10
9.31
2.43
133.38
106.70
4.79
4.24
4.30
3.20
2.74
9.78
8.39
5.70
0.64
0.92
0.67
0.46
0.41
0.48
0.84
0.62
1.03
1.85
3.53
3.99
11.58
6.82
2.74
2.96
5.18
4.56
3.42
7.43
5.52
2.74
5.34
3.42
4.47
0.55
1.36
0.56
1.36
4.00
2.28
1.96
HB312
HB313
HB314
HB315
HB316
HB318
HB319
HB320
HB321
HB322
HB323
HB324
HB325
HB326
HB327
HB328
HB329
HB330
HB331
HB333
HB335
HB336
HB337
HB338
HB339
HB340
HB341
HB342
HB343
HB344
HB345
HB346
HB347
HB348
HB349
HB350
HB351
HB352
HB353
HB354
HB355
HB356
HB357
HB358
HB359
HB360
HB361
HB362
HB363
HB364
HB365
HB366
HB367
HB368
HB369
HB370
HB371
HB372
HB373
HB374
HB375
HB376
HB377
HB378
HB379
HB380
HB381
HB382
HB383
HB384
HB385
HB386
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
14.23
15.07
14.73
13.77
18.70
0.41
0.57
0.62
0.50
0.50
0.50
0.48
0.50
0.44
0.48
0.48
0.48
0.48
0.50
1.20
0.86
1.87
0.89
1.06
0.99
1.37
1.03
0.86
1.40
0.89
1.03
0.75
1.04
1.78
1.03
0.82
1.40
0.86
1.04
1.03
1.03
1.03
1.04
0.86
0.99
0.99
0.99
0.99
0.68
0.86
1.20
1.03
1.30
1.30
21.96
0.68
3.01
2.98
3.42
3.42
9.12
19.27
20.06
22.80
1.27
2.22
3.42
9.12
9.10
11.40
33.76
5.68
JB001
JB002
JB003
JB004
JB005
JB006
JB007
JB008
JB009
JB010
JB011
JB012
JB013
JB014
JB015
JB016
JB017
JB018
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
1.44
2.28
2.55
2.92
3.28
3.65
0.96
0.41
0.75
0.57
0.68
0.72
1.16
1.37
1.00
1.29
3.16
3.19
JB019
JB020
JB021
JB022
JB023
JB024
JB025
JB026
JB027
JB028
JB029
JB030
JB031
JB032
JB033
JB035
JB036
JB037
JB038
JB042
JB043
JB044
JB045
JB046
JB047
JB048
JB049
JB050
JB051
JB052
JB053
JB054
JB056
JB057
JB058
JB059
JB060
JB062
JB064
JB065
JB066
JB067
JB068
JB069
JB071
JB073
JB074
JB075
JB076
JB077
JB078
JB079
JB080
JB081
JB082
JB083
JB084
JB085
JB086
JB087
JB088
JB089
JB090
JB091
JB092
JB093
JB094
JB095
JB096
JB097
JB098
JB099
JB100
JB101
JB102
JB103
JB104
JB106
JB108
JB109
JB110
JB111
JB112
JB113
JB114
JB115
JB116
JB118
JB119
JB120
JB121
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0.57
1.23
1.23
1.23
0.81
0.81
0.81
0.41
0.81
0.81
0.81
0.81
0.41
0.81
0.81
11.99
12.00
8.08
1.16
1.86
1.72
1.37
2.05
2.11
2.37
2.82
3.27
15.13
42.69
42.50
1.85
1.72
5.75
7.98
2.39
3.00
2.96
3.06
7.98
2.79
4.29
3.39
2.43
3.83
3.28
2.57
6.09
4.45
2.85
6.35
3.39
3.42
2.39
2.86
3.43
3.43
3.12
3.14
13.28
16.79
3.72
3.77
2.85
4.34
3.42
4.57
2.74
2.30
2.45
3.07
2.85
2.39
3.25
4.51
2.88
3.42
2.74
4.29
5.02
3.47
5.43
4.25
3.08
3.31
7.98
4.51
4.26
7.09
3.42
5.70
6.62
JB122
JB123
JB125
JB126
JB127
JB128
JB129
JB130
JB134
JB135
JB136
JB137
JB138
JB139
JB140
JB141
JB143
JB144
JB145
JB146
JB147
JB148
JB149
JB150
JB151
JB152
JB153
JB154
JB155
JB157
JB158
JB160
JB161
JB162
JB164
JB165
JB167
JB168
JB169
JB170
JB171
JB173
JB175
JB176
JB177
JB178
JB179
JB180
JB181
JB183
JB185
JB186
JB187
JB190
JB191
JB192
JB193
JB194
JB195
JB196
JB197
JB198
JB200
JB201
JB206
JB207
JB208
JB209
JB210
JB211
JB212
JB213
JB215
JB216
JB218
JB219
JB220
JB221
JB222
JB223
JB225
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
4.01
4.49
0.81
3.40
2.61
5.70
94.53
22.88
150.53
4.56
12.55
2.67
33.76
46.17
0.62
2.26
4.33
5.56
5.11
8.80
7.30
2.74
4.99
3.42
3.42
3.88
3.97
9.64
17.78
5.29
2.94
5.02
6.52
4.56
3.42
6.09
4.10
10.88
6.04
2.05
3.24
5.18
2.37
6.22
4.29
4.15
7.20
5.70
4.56
3.92
6.48
5.02
16.64
3.31
3.65
5.43
3.65
4.67
5.13
4.22
3.53
3.31
7.30
3.31
1.16
1.60
2.60
4.74
11.30
21.14
7.06
7.43
4.51
12.77
0.49
0.54
2.05
2.05
1.03
1.03
12.97
KB001
KB002
KB003
KB004
KB005
KB006
KB007
KB008
KB009
R
R
R
R
R
R
R
R
R
0.21
0.21
0.32
0.21
0.25
0.21
0.32
0.21
0.27
KB010
KB011
KB012
KB013
KB014
KB015
KB016
KB017
KB018
KB019
KB020
KB021
KB022
KB023
KB024
KB025
KB026
KB027
KB028
KB029
KB030
KB031
KB032
KB033
KB034
KB035
KB036
KB037
KB038
KB039
KB040
KB041
KB042
KB043
KB044
KB045
KB046
KB047
KB048
KB049
KB050
KB051
KB052
KB053
KB054
KB055
KB056
KB057
KB058
KB059
KB060
KB061
KB062
KB063
KB064
KB065
KB066
KB067
KB068
KB069
KB070
KB071
KB072
KB073
KB074
KB075
KB076
KB077
KB078
KB079
KB080
KB081
KB082
KB083
KB084
KB085
KB086
KB087
KB088
KB089
KB090
KB091
KB092
KB093
KB094
KB095
KB096
KB097
KB098
KB099
KB100
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0.21
0.21
0.21
0.32
0.21
0.27
0.21
0.27
0.27
0.34
0.21
0.32
0.21
0.25
0.21
0.21
0.14
0.16
0.21
0.16
0.21
0.21
0.21
0.14
0.21
0.16
0.21
0.21
0.21
0.21
0.21
0.21
0.14
0.23
0.21
0.21
0.21
0.21
0.21
0.25
0.14
0.16
0.18
0.25
0.21
0.23
0.14
0.25
0.25
0.21
0.21
0.18
0.23
0.16
0.21
0.14
0.16
0.21
0.21
0.14
0.16
0.14
0.21
0.14
0.14
0.21
0.21
0.21
0.25
0.21
0.16
0.14
0.14
0.21
0.21
0.21
0.21
0.21
0.21
0.14
0.21
0.14
0.21
0.25
0.25
0.14
0.25
0.14
0.21
0.21
0.14
KB101
KB102
KB103
KB104
KB105
KB106
KB107
KB108
KB109
KB110
KB111
KB112
KB113
KB114
KB115
KB116
KB117
KB118
KB119
KB120
KB121
KB122
KB123
KB124
KB125
KB126
KB127
KB128
KB129
KB130
KB131
KB132
KB133
KB134
KB135
KB136
KB137
KB138
KB139
KB140
KB141
KB142
KB143
KB144
KB145
KB146
KB147
KB148
KB149
KB150
KB151
KB152
KB153
KB154
KB155
KB156
KB157
KB158
KB159
KB160
KB161
KB162
KB163
KB164
KB165
KB166
KB167
KB168
KB169
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0.21
0.21
0.21
0.23
0.14
0.14
0.21
0.21
0.31
0.25
0.21
0.21
0.14
0.21
0.21
0.21
0.21
0.21
0.21
0.14
0.16
0.14
0.18
0.16
0.21
0.18
0.18
0.21
0.21
0.21
0.14
0.21
0.14
0.21
0.21
0.21
0.14
0.14
0.21
0.21
0.21
0.18
0.23
0.18
0.14
0.21
0.18
0.21
0.21
0.21
0.23
0.21
0.14
0.21
0.14
0.21
0.18
0.21
0.27
0.27
0.23
0.21
0.21
0.21
0.21
0.21
0.32
0.21
0.21
MB025
MB027
MB028
MB029
MB031
MB032
MB033
MB034
MB048
MB049
MB056
MB057
MB058
MB059
MB060
MB061
MB062
MB076
MB081
MB083
MB084
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
10.21
10.21
13.17
13.83
66.69
6.22
8.90
8.03
66.69
11.63
7.80
116.96
2.46
3.93
7.82
4.65
6.16
6.77
3.77
25.14
46.90
MB085
MB086
MB087
MB090
MB095
MB099
MB100
MB101
MB102
MB103
MB104
MB121
MB122
MB123
MB124
MB126
MB130
MB139
MB140
MB141
MB142
MB143
MB144
MB145
MB146
MB147
MB148
MB149
MB150
MB151
MB152
MB153
MB154
MB155
MB156
MB157
MB158
MB159
MB160
MB161
MB162
MB163
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
21.41
110.17
75.18
172.38
74.66
1.80
1.98
2.18
19.38
44.12
36.43
2.07
1.97
2.79
3.23
49.50
4.33
13.68
10.98
1.53
2.36
1.97
1.87
2.42
2.47
2.66
3.02
21.99
36.12
7.98
2.83
3.03
2.85
3.11
3.53
4.29
8.70
2.83
3.31
4.15
8.24
30.53
NB001
NB006
NB011
NB016
NB021
NB026
NB031
NB036
R
R
R
R
R
R
R
R
2.41
3.81
4.66
5.65
7.41
9.09
10.25
13.06
PB004
PB005
PB007
PB019
PB020
PB021
PB022
PB024
PB026
PB028
PB030
PB031
PB032
PB034
PB035
PB037
PB041
PB042
PB046
PB048
PB049
PB050
PB056
PB086
PB098
PB099
PB101
PB102
PB107
PB112
PB115
PB119
PB120
PB124
PB125
PB126
PB127
PB128
PB129
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
35.00
125.71
290.85
116.96
93.43
102.19
54.09
72.98
213.67
193.00
56.43
165.70
139.18
56.03
63.44
22.24
123.84
47.60
50.13
29.65
116.71
70.03
61.56
61.56
48.75
48.75
49.25
49.56
49.25
61.06
86.50
61.06
61.06
22.04
22.04
119.48
188.37
160.36
198.12
10
PB130
PB149
PB161
PB162
PB163
PB167
PB168
PB173
PB174
PB177
PB178
PB179
PB180
PB182
PB185
PB188
PB189
PB190
PB192
PB193
PB196
PB197
PB198
PB199
PB200
PB205
PB207
PB208
PB209
PB210
PB211
PB219
PB220
PB221
PB222
PB242
PB243
PB244
PB259
PB268
PB271
PB272
PB278
PB279
PB280
PB281
PB282
PB283
PB288
PB291
PB292
PB297
PB298
PB300
PB301
PB302
PB303
PB304
PB305
PB307
PB308
PB309
PB310
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
92.51
22.47
120.56
55.81
46.73
21.41
96.27
21.66
21.66
61.06
61.06
74.81
61.56
77.81
94.57
70.03
93.37
115.74
73.17
328.51
208.40
93.72
32.13
22.04
22.04
93.37
62.24
128.39
93.37
66.13
89.48
120.60
634.89
81.69
73.92
56.69
8.73
9.35
61.06
101.15
58.31
189.09
73.87
48.23
199.04
127.22
50.57
70.03
73.87
86.18
86.18
86.18
43.75
112.83
89.48
62.24
50.57
101.15
50.57
116.07
32.96
39.23
79.20
QB002
QB006
QB015
QB018
QB020
QB024
QB041
QB053
QB054
QB055
QB056
QB057
QB060
QB064
QB066
QB067
QB070
QB071
QB072
QB073
QB074
QB076
QB077
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
254.95
142.20
101.51
86.18
73.37
44.12
56.02
9.09
9.64
36.29
14.10
14.64
61.21
318.22
9.44
86.18
70.11
71.98
84.47
95.83
17.75
30.86
37.10
RB004 R 107.01
RB007 R 718.93
RB008 R 133.38
RB012
RB013
RB014
RB019
R
R
R
R
436.98
25.40
25.40
350.25
SB008
SB009
SB010
SB011
SB012
SB013
SB014
SB015
SB016
SB017
SB018
SB019
SB020
SB021
SB022
SB023
SB024
SB025
SB026
SB027
SB028
SB029
SB030
SB031
SB032
SB033
SB034
SB035
SB036
SB037
SB038
SB039
SB041
SB042
SB043
SB046
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
9.90
3.06
57.66
63.48
57.13
58.14
62.28
63.50
63.48
63.48
63.48
62.88
193.58
136.16
106.88
201.21
105.23
25.40
25.40
31.42
31.42
44.46
44.46
104.31
50.70
107.73
82.08
107.94
90.29
44.46
31.42
31.42
406.66
44.46
118.20
190.63
TB001
TB004
TB016
TB018
TB021
TB022
R
R
R
R
R
R
31.33
99.32
607.94
549.86
268.13
135.43
VB001
VB036
VB045
VB046
VB047
VB050
R
R
R
R
R
R
23.60
622.67
191.99
191.99
191.99
132.05
XB001
XB004
XB005
XB006
XB007
XB009
XB026
XB030
XB033
XB034
R
R
R
R
R
R
R
R
R
R
20.00
146.72
189.60
202.53
229.82
64.23
107.49
337.44
94.80
193.44
FAX: 012 3320487
HOW TO ORDER
TEL: 012 3322356
1. Use the order codes that appear in the catalogue to order products
2. Use the price list at the back of the catalogue prices are in Rand and VAT inclusive. (Price subject to change without prior notice)
3. Fax the order form to Electronics123 at 012 3320487
Code
Description of Product
Quantity
Price
Total
Add postage and packaging (see Remarks 1 to 3 below) R40/65/55
TOTAL R
REMARKS:
1. Add R40 for postage and packaging in RSA, allow 5-7 days for delivery.
2. Add R65 for postage and packaging all other countries, allow 30 days for delivery.
3. Add R55 for urgent dispatch with Speed Services Courier, parcel is delivered within 2-3 days at your local post
office (subject to stock availability). Phone for your parcel tracking number. (Only available in RSA)
Name and Surname
Client Number
Telephone Number
(Please complete if known)
Delivery Address
Postal Code
Debit my credit card for R
MasterCard
Card Holder Name
Visa
Signature
Credit Card Number
Last three digit of the number appearing on the reverse of your credit card
Expiry Date
For bank payment please complete the depositor’s reference on the bank deposit slip with your client number.
I have deposited R………………………….…into the following bank account (Gezina Branch):
⃞ABSA (Account 050-298-779)
Branch code: (33-41-45) Account name holder: (Electronics123)

Electronics 123

Transcription

Similar documents

Where you come to know.

NB-180 NEWBURG

P4400 KAW spec sheet V4b

Johnny Tremain by Esther Forbes Objectives

dedocool - Dedolight

SKYBOT HAND

official press kit 2015

ckc- St. LOUIS EXHIBITOR COUPONS 2016

Get It Together!

KIRCHOFF`S VOLTAGE LAW: EXAMPLE 1