Heating Guide

2009
www.denmans.co.uk
Heating Guide
Contents
04
New Classic
Storage Heaters
19
Portable Heaters
06
New Classic
Combi Heaters
20
Convector Heaters
07
New Classic
Panel Convector Heaters
21
Oil Filled Radiators
08
Storage Heaters
22
Halogen/Infra Red Heaters
09
Duoheat Radiators
23
Outdoor Patio Heaters
10
Ultra Slim Panel
Convector Heaters
24
Tubular Heaters
11
Focal Point Electric Fires
25
Frost Protection
12
MyHeat
Underfloor Heating
26
Water Heating
16
Towel Rails
27
Solar Thermal Hot Water
18
Overdoor, Screen and
Plinth Heaters
28
Branch List and Contacts
2
Introduction
Welcome to Denmans Electrical Wholesalers and Clearlight Electrical Company’s heating guide - brand new for 2009!
This heating brochure aims to illustrate and provide informative and technical guidance on a selection of our heating range,
with products that will provide you with the warmth and comfort needed over the cold winter months.
From domestic - whole house, bathroom and kitchen heating to commercial heating and general purpose heaters, including
portable fans and focal point fires, we also have a whole range of energy efficient appliances you can be confident in.
Alongside the increasing popularity of electric heating and emphasis on energy efficient usage, we are proud to introduce
our newly developed range of electric underfloor heating systems, MYHEAT®, and we are the first to bring to you the latest
products, including the Solar Thermal Hot Water System by Dimplex.
At Denmans/Clearlight, we recognise the importance of being able to respond quickly to changes in the market and to keep
you up-to-date with the latest news. It is also invaluable that our customers can contact us so we can work together to
improve our businesses by fulfilling orders efficiently, answer all your electrical queries and use our comprehensive supplier
database to ensure we can source all the electrical supplies you might need. So why not call in to your local branch today to
discuss your electrical queries? Alternatively, visit our website www.denmans.co.uk for more information.
Denmans/Clearlight - the source for all your heating requirements.
Online version available:
www.denmans.co.uk
3
New Classic - Heating Specification
If you need to obtain an indication of the heating requirements for estimating please use the Selection Guide below. Heater sizing for storage heaters and panels
can be easily calculated. Knowing the floor area, the wall construction and the number of outside walls, the heater loading in kilowatts is indicated in the
appropriate table.These tables do not take into account particularly old properties or those built very recently. If your property fits into one of these classifications,
please contact us so that we can provide a more accurate assessment. Note a ceiling height of 2.4m is assumed and a minimum of 75mm of roof insulation.
Floor
Area
m2
12
16
20
24
28
32
LIVING OR DINING ROOM
BEDROOMS
Storage Heaters. Heater loading in kW Temp 18ºC
Panel Heaters recommended. Heater loading in kW Temp 18ºC
Solid Walls
Number of outside walls
1
2
3
3.5
4.1
5.4
3.9
4.7
6.0
5.0
5.9
7.4
5.6
6.5
8.1
6.2
7.4
9.0
6.6
8.1
9.9
Cavity Walls
Number of outside walls
1
2
3
3.0
3.6
4.7
3.5
4.4
5.4
4.4
5.1
6.5
5.0
5.9
7.1
5.6
6.5
8.0
6.2
7.1
8.9
Floor
Area
Insulated Cavity Walls
Number of outside walls
1
2
3
2.1
2.4
3.2
2.6
3.0
3.6
3.2
3.6
4.4
3.9
4.4
5.0
4.1
4.7
5.6
4.5
5.1
6.0
m2
8
12
16
20
24
Solid Walls
Number of outside walls
1
0.8
0.9
1.2
1.4
1.5
m2
10
12
14
16
1
1.6
1.9
2.1
2.4
2
2.1
2.7
3.0
3.3
3
2.9
3.3
3.6
3.9
2
0.9
1.4
1.6
1.8
1.9
3
1.4
1.8
2.1
2.4
2.5
OFFICES AND GENERAL AREAS
Storage Heating. Heater loading in kW Temp 18ºC
Solid Walls
Number of outside walls
Insulated Cavity Walls
Number of outside walls
2
3
1
2
3
1
1.3
1.7
0.8
1.0
1.4
0.8
1.8
2.3
0.9
1.4
2.1
0.8
2.1
2.7
1.0
1.7
2.2
0.9
2.2
3.1
1.2
2.0
2.6
1.0
2.3
3.4
1.2
2.1
2.9
1.0
For storage heaters multiply all loading by 1.5
KITCHEN
Floor
Area
Cavity Walls
Number of outside walls
Panel Heaters. Heater loading in kW Temp 21ºC
Cavity Walls
Number of outside walls
Insulated Cavity Walls
Number of outside walls
1
1.4
1.7
2.0
2.1
For all kitchens with
cavity wall insulation
direct heating is fine,
choose from plinth
heaters or fan heaters
for all situations.
2
2.0
2.3
2.6
2.9
3
2.4
2.9
3.1
3.4
Floor Area
Solid Walls
Cavity Walls
m2
15
20
25
30
40
50
3.8
5.0
6.3
7.5
10.0
12.5
2.6
3.5
4.4
5.3
7.0
8.8
Insulated Cavity Walls
1.5
2.0
2.5
3.0
4.0
5.0
New Classic - Mini Storage Heater
Mini Storage Heater
B
Mini storage heater with preset manual input charge control.
• Designed for use in confined areas, for background
heating or to supplement an existing system.
• Ideal for use in bathrooms, cloakrooms & en-suites.
• BEAB approved.
• Frontal grille for efficient heat distribution.
• Suitable for domestic or commercial use.
A
• 850 Watt.
• Excellent value for money.
DETAILED SPECIFICATION
• Controls: No user adjustable controls.
• Storage core: High density bonded magnetite bricks.
• Element: 0.85 kW Incoloy sheathed.
• Insulation: Front: microtherm G.: Rear: resin free needle fibre.
Top and ends: low resin mineral wool. Base: calcium silicate slab.
• Thermal Cut Out: Bimetal, manual reset.
• Input Charge Controller: Bi metal thermostat, preset.
• Colour/Finish: Front, grille and side panels:Willow White.
• Cable Length: None fitted.
• Standard Warranty: 2 years.
• Approvals: CE, BEAB, IPX2.
C
Code
NC850MANU
Wattage
850W
A
B
C
Weight
707mm
332mm
170mm
41 kg*
Storage Heat Retention Bricks. These are the Industry standard bricks. Each element in a
heater has 4 bricks surrounding it. They are supplied in packs of two and weigh approx
7.5kg each.
* Including bricks
4
New Classic - Auto Storage Heaters
New Classic storage and panel heaters can provide heating solutions for every room in the house.Whether it’s a whole house heating system or a
single room one of the real benefits is that you can choose from a comprehensive range to meet your exact requirements, at a price that is
affordable.
Auto Storage Heaters
B
Storage heaters with automatic input charge control.
• Automatically adjusting input charge controller.
• Room temperature boost control.
• Frontal grille for efficient heat distribution.
• Suitable for domestic or commercial use.
A
• BEAB approved.
• Excellent value for money.
DETAILED SPECIFICATION
• Controls: Room temperature control. Room temperature boost.
Both controls concealed behind flap, top right hand corner.
• Storage core: High density bonded magnetite bricks.
• Element: 0.85 kW Incoloy sheathed.
• Insulation: Front: microtherm G. Rear: resin free needle fibre.
Top and ends: low resin mineral wool. Base: calcium silicate slab.
• Thermal Cut Out: Bimetal, manual reset.
• Input Charge Controller: Adjustable twin sensing hydraulic room
sensing thermostat and pre-set bi metal core limit thermostat.
• Damper Control (Boost): Bi-metal/cam assembly,
giving user adjustable boost selection.
• Colour/Finish: Front, grille and side panels:Willow White.
• Cable Length: None fitted.
• Standard Warranty: 2 years.
• Approvals: CE, BEAB, IPX2.
C
Wattage
A
B
C
Weight
700mm
700mm
700mm
560mm
788mm
1016mm
170mm
170mm
170mm
(see below)
Curtains
NC1700WAUT 1700W
NC2550WAUT 2550W
NC3300WAUT 3400W
Shelf or Overhang
(see below)
250
min
(see below)
Performance
Voltage (~AC)
Input rating
Charge acceptance (7hr)
No. Elements (0.85kW)
Weight (incl. bricks)
Packed weight
NC1700WAUT
230-240
1.70 kW
12 kWh
2
77 kg
16.5 kg
NC2550WAUT
230-240
2.55 kW
18 kWh
3
110 kg
21.5 kg
Wall,
Curtains or
furniture
75 min
NC3300WAUT
230-240
3.4 kW
24 kWh
4
145 kg
26.5 kg
75
min
A
C
Furniture
or other
Obstruction
Code
150
MIN
88
B
5
New Classic - Combi Heaters
This range provides the benefit and convenience of economy storage heating with the flexibility of “direct-acting” top up heat. Increased
controllability allows the user to turn on the convector and enjoy heat on demand. Comfort conditions are automatically maintained with the
convector element controlled by a thermostat. This range has the benefit of allowing the storage heat and convector to operate separately or
simultaneously. The convector element can be used even when the storage heater is charging. The convector switch incorporates a neon indicator
to avoid inadvertent use.
Combi Heaters
Storage heaters with automatic input charge control.
• Automatically adjusting input charge controller.
B
• Room temperature boost control.
• Frontal grille for efficient heat distribution.
• Suitable for domestic or commercial use.
• BEAB approved.
• Excellent value for money.
• Requires independent supply to run the convector.
A
DETAILED SPECIFICATION
• Controls: Convector room temperature control located top
right side of front panel.
• Storage core: High density bonded magnetite bricks.
• Element: 0.85 kW Incoloy sheathed.
• Insulation: Front: microtherm G. Rear: low resin mineral wool.
Top and ends: low resin mineral wool. Base: calcium silicate slab.
• Thermal Cut Out: Bimetal, manual reset.
• Input Charge Controller: Hydraulic room temperature sensing thermostat.
• Class: Class 1.
• Colour/Finish: Front, grille and side panels: Willow White.
• Cable Length: None fitted.
• Standard Warranty: 2 years.
• Approvals: CE, BEAB, IPX2.
C
Code
Wattage
A
B
C
Weight
NC170WCOM 1700W
NC255WCOM 2550W
NC330WCOM 3400W
700mm
700mm
700mm
560mm
788mm
1016mm
204mm
204mm
204mm
(see below)
Performance
Voltage (~AC)
Input rating
Charge acceptance (7hr)
No. Elements (0.85kW)
No. Bricks
Weight (incl. bricks)
Packed weight
NC170WCOM
230-240
1.7 kW
12 kWh
2
8
78 kg
17.5 kg
NC255WCOM
230-240
2.55 kW
18 kWh
3
12
112 kg
23.5 kg
(see below)
(see below)
NC330WCOM
230-240
3.4 kW
24 kWh
4
16
147 kg
28.5 kg
6
New Classic - Panel Convector Heaters
New Classic storage and panel heaters can provide heating solutions for every room in the house.Whether it’s a whole house heating system or a
single room one of the real benefits is that you can choose from a comprehensive range to meet your exact requirements, at a price that is
affordable.
Slim Line Wall Mounted Panel Convector Heaters
Available with and without 24 hour timer.
• Convected heat for rapid warm up.
• Five sizes available with heat outputs up to 3kW.
• Frost protection setting.
• Splash-proof, ideal for wet areas such as bathrooms.
• Suitable for domestic and commercial use.
• Excellent value for money.
• Colour matched to the New Classic storage heaters.
AVAILABLE WITH OR WITHOUT TIMER
DETAILED SPECIFICATION
• Controls: Adjustable thermostat. 24 hour timer (NC2PH Timer models only).
• Power Switch: Non timer models: Single pole ON/OFF switch.
Timer models: 24 hour timer which can be preset to 20min intervals
and incorporates manual override switch to provide either constant
heat or switch heater off. 1250W, 1500W and 2000W models offer choice of half
or full heat power settings.
• Element: Finned, metal sheathed mineral filled type.
• Thermostat: Gas filled type.
• Thermal Cut Out: Interrupt supply to reset type.
• Colour/Finish: Front, grille and side panels:Willow White.
• IP Rating: IPX4 (splashproof).
• Cable Length: 1 metre of flex fitted.
• Standard Warranty: 2 years.
• Approvals: CE, BEAB.
NC2PH750 NC2PH1250 NC2PH1500 NC2PH2000 NC2PH3000
Performance NC2PH750T NC2PH1250T NC2PH1500T NC2PH2000T NC2PH3000T
Loading kW
0.75 kW
1.25 kW
1.5 kW
2.0 kW
3.0 kW
Dimensions
Width (A) (mm)
620
690
690
860
860
Height (mm)
Depth (B) (mm)
(X) (mm)
Weight (kg)
430
108
287
6.2
430
108
355
6.6
430
108
355
6.6
430
108
527
8.0
430
115
527
10.0
7
Storage Heaters
Storage heaters use off-peak electricity to store heat in special heat-retaining bricks, thereby keeping running costs low. These then give out heat
slowly and are designed to keep warm for the whole of the following day. Easy to install, requiring no pipework or flues.
Slimline Storage Heaters
• Ultra slim design, offering performance, economy
and maintenance free reliability.
B
C
• The XLS range is suitable for a wide range of domestic
and commercial applications.
XL Range
XLS Range
• The automatic XLS range features automatic charge regulator, which automatically
adjusts the level of input charge to compensate for changing weather conditions without
the need for user intervention.
A
• At the heart of this system is the patented Twin Sensor®, which meets the requirements
of Building Regulations Part L1, which requires all electric storage heaters installed in
new builds to be fitted with automatic charge controls.
Code
XL12/XLS12
XL18/XLS18
XL24/XLS24
Wattage
A
B
C
Weight
• Running cost savings of up to 15% when compared to manual static storage heaters.
1700W
2550W
3400W
706mm
706mm
706mm
565mm
793mm
1021mm
146mm
146mm
146mm
76 kg
109 kg
144 kg
• Less than 150mm (6” deep).
• Smooth curved styling.
• Room temperature boost control increases heat output when required and may be used
automatically or manually.
• Easy to use controls, out of sight of young children. Secure wall fixings for safety.
• Frontal grille for efficient heat distribution.
• Feet may be fitted under carpet or on top of a suitable floor covering.
• Matches the PLX range of panel heaters.
• Compatible with all off peak tariffs.
• Drip proof construction (IPX2 rated).
The XL range features manually adjustable charge regulator to control the amount of heat
stored during the charge period.
Automatic Mini Storage Heater
B
C
• This mini storage heater is an extra compact version of our popular XLS storage heater
bringing the benefits of off peak heating to areas which were traditionally too small for
storage heaters such as bathrooms, cloakrooms and ensuites.
• Ideal to top up existing heating in cold spots, improving the overall comfort and
efficiency of the system.
A
• Automatic input control to automatically regulate the input charge according to changing
weather conditions.
• Suitable for use in confined areas, for background heating,
or to supplement an existing system.
• Input loading of just 850W.
• Secure wall fixing for safety. Feet may be fitted under
carpet or on top of suitable floor covering. Simple
assembly for flexible positioning and quick installation.
• Drip proof construction (IPX2 rated).
Code
XL6/XLS6
Wattage
850W
A
B
C
Weight
700mm
332mm
170mm
41 kg
• The XLS6 is designed specifically for use in wet areas
such as bathrooms and is Building Regulations Part L compliant.
• Accessory towel rail (part no. STR6) and shelf (SHE6) available.
8
XL6
XLS6
Storage Heaters
B
Combination Storage and Convector Heater
C
Similar to XLS models but with built in convector to supplement stored heating, or it can
be used as the sole heating if heat is required unexpectedly - for example in spring or
autumn. By providing two heaters in one compact case, the CXL saves space and its
smooth curved styling complements PLX panel heaters.
• Provides a continuous source of warmth, primarily from cheap off peak electricity.
• Conveniently positioned convector controls on the front panel.
• Convector gives completely silent top-up heating.
A
CXL Range
• Convector can operate independently of storage heater.
• Lower convector loadings selectable on installation.
• Flexible heating with instant top-up.
CXLS Range
• Secure wall fixing for safety.
• Feet may be fitted under carpet or on top of suitable floor covering.
Code
Wattage
CXL12/CXLS12 1700W
CXL18/CXLS18 2550W
CXL24/CXLS24 3400W
A
B
C
Weight
• Simple assembly for flexible positioning and quick installation.
706mm
706mm
706mm
565mm
793mm
1021mm
193mm
193mm
193mm
77 kg*
111 kg*
146 kg *
• CXLS range features automatic charge regulator, which automatically adjusts
the level of input charge to compensate for changing weather conditions
without user intervention.
• CXLS models are Building Regulations Part L compliant.
* Including bricks
• Requires independent supply to run the convector.
DuoHeat® Radiators
The very latest in electric heating - using a combination of off-peak and direct acting electricity together to ensure heat is available throughout the
day and evening, whilst keeping running costs low.
B
DuoHeat® Radiators
C
DUO Range
• Stylish, slim line design with concealed outlet grille.
• Heat output provided by a combination of off-peak and standard rate electricity sources.
• Patented ‘smart’ heat manager automatically controls output level from each heat
source, optimising controllability and economy*.
• Single, simple to use and understand electronic user control, with child lock facility.
• Electronic room temperature control allowing user adjustment of heater output.
• User configurable electronic automatic input charge regulator.
A
• Compatible with Dimplex 4-zone, wall mounted pilot wire and mains borne signalling
multi-heater programmers.
• Pre-wired electrical connections. Simple, secure wall fixings. Snap fit feet.
• Easy-fit front panel connections.
• Compatible with all off-peak tariffs.
Code
Wattage
A
B
C
Weight
DUO300i
DUO400i
DUO500i
1300W
1900W
2600W
712mm
712mm
712mm
600mm
830mm
1060mm
130mm (+10mm)
130mm (+10mm)
130mm (+10mm)
65 kg
94 kg
124 kg
• Energy-efficiency savings of up to 10% compared with traditional off-peak electric
heating systems, recognised by SAP2005, the tool for showing compliance with Part L
of the Building Regulations.
• Requires independent supply to run the radiant front panel.
* Patent number: GB2384300
9
Ultra Slim Panel Convector Heaters
The PLX range is a cost effective way to extend an existing heating system when buildings are being refurbished or new rooms added. It is a
popular choice for specifiers, home owners and contractors who demand stylish, space saving and efficient electric heating systems. Styled to
complement the Dimplex storage heaters and DuoHeat radiators, PLX panel heaters are often used to heat areas such as bedrooms, bathrooms,
kitchens and other areas that only require heating for short periods of the day.
Ultra Slim Panel
Convector Heaters
C
B
PLX Range
Within the range are 24 hour and 7 day timer models, and models with
no built-in controls for use with remote controllers.
• Suitable for domestic or commercial use.
• All models are splashproof (IPX4 rated) for use in bathrooms
and other wet areas.
• Convected heat for rapid warm-up.
• High accuracy adjustable thermostat/timer that responds to
very small changes in room temperature to reduce temperature drift.*
• Frost protection setting.**
• Front air outlet grille for efficient heat circulation.
A
• Lockable dust cover protects controls.
• Detachable hinged wall mounting frame for fast installation
and easy cleaning.
* PLX TI, PLX TX or PLX NC models fitted with appropriate
external thermostat/timer.
** Not applicable to PLX NC range.
Dimensions
Code
Wattage
A (h)
B (w)
C (d)
Weight
(see right)
500W
750W
1000W
1250W
1500W
2000W
3000W
430mm
430mm
430mm
430mm
430mm
430mm
430mm
450mm
620mm
620mm
690mm
690mm
860mm
860mm
108mm
108mm
108mm
108mm
108mm
108mm
143mm
4.8 kg
6.2 kg
6.2 kg
6.6 kg
6.6 kg
8.0 kg
10.0 kg
(see right)
(see right)
(see right)
(see right)
(see right)
(see right)
PLX Range of models include:
• Thermostat only: PLX[wattage]
• 24 Hour Timer: PLX[wattage]TI
• 24 Hour Timer White FInish: PLX[wattage]WTI †
• 7 Day Timer: PLX[wattage]TX ††
• No Controls: PLX[wattage]NC †††
† excludes 750W, 1250W and 3000W versions
†† available only in 2000W and 3000W versions
Versions available
Wattage
500W
750W
1000W
1250W
1500W
2000W
3000W
††† excludes 3000W
Thermostat
Only
•
•
•
•
•
•
•
24 Hour
Timer
24 Hour White
Timer
•
•
•
•
•
•
•
•
7 Day
Timer
•
•
•
•
•
No Controls
•
•
•
•
•
•
10
Focal Point Electric Fires
Electric fires provide a wonderful feeling of comfort and cosiness whilst adding a distinctive and modern design to your home.You can enjoy a warm
glow without the mess and maintenance of a real fire. The flame effect can also be used independently of the heating, to enjoy the appearance of
the flames without overheating the room - ideal for those dark but mild evenings.
Brayford 2kW Log Effect Fire
BFD20
• Compact stove designed to fit in or
on a standard fireplace and hearth.
• Optiflame® log effect.
• 1kW or 2kW fan heat selection.
• Black cast effect finish.
• Remote control on/off.
• Compatible with hearth pad accessory HPD001.
• Flame effect can be used independently of heat source.
Cheriton Freestanding Fire
CHT20
• Optiflame® effect and real coals.
• Fits 'flat to wall' - no inset required.
• Choice of 1kW or 2kW fan heat settings.
• Black and brass effect finish.
• Compatible with hearth pad accessory HPD001.
• Flame effect can be used independently of heat source.
• Model with LED effect also.
Exbury Brass Inset Fire
EBY15
• Canopy free fire - no protrusion from fan heater.
• Brass effect finish with real coals.
• 1.5kW inset or freestanding fire with unique Optiflame® effect with real coal.
• Electronic thermostatic control gives highly accurate room temperature control.
• Designed to fit 16" and 18" fireplaces and all conventional flues.
• Fits flat-to-wall with 70mm spacer (included).
• Manual or remote control giving armchair selection of on/off.
Danesbury Black Inset Fire
DAN20BL
• Inset fire with unique Optiflame® effect.
• Inset depth of just 55mm* fully inset or can be used flat-to-wall using spacer provided.
• Designed to fit 16" and 18" fireplaces and all conventional flues.
• Supplied with real coal. Flame effect can be used independently of heat.
• 2kW fan heater with choice of two heat settings.
• Controls concealed beneath lift-up canopy.
*55mm depth applies to series K and onwards; before series K inset depth is 115mm.
(SURROUNDS NOT INCLUDED).
11
Underfloor Heating - MyHeat
Why choose electric underfloor heating?
Electric underfloor heating systems are one of only two systems recognised by the Government's Standard Assessment Procedure (SAP) as
having the necessary parameters to qualify for inclusion into the SAP calculation - the other being storage heater systems with radiant panels built
in and which are controlled as a single unit. Long term there is little doubt that the future is electric. And of course, energy efficient electric
appliances are, by definition, 'renewables ready'. This means that as more renewable and low carbon sources of supply become available,
electricity will increasingly be favoured over gas.
MYHEAT® Electric Underfloor Heating Systems - made in the UK exclusively for Denmans/Clearlight. FREE design and quote service available.*
MYHEAT® Classic Heating Mats
MYHEAT® Classic is ideal for refurbishment projects in existing dwellings or in new-build
extension projects. Either as direct floor heating or as floor storage heating.
(See Figure 1).
There is no need to remove existing ceramic floor tiles - you can install the MYHEAT®
Classic heating mats directly on top of the existing tiles and then tile over them as
normal. There is normally no need to reduce door heights or raise skirting boards.
MYHEAT® Classic is ideally suited to installation within the adhesive layer, the method
preferred by professional floor tilers when laying ceramic tiles. MYHEAT® electric
underfloor heating systems are clean, quiet in operation, 100% efficient at the point of
use and require absolutely no maintenance at all.
MYHEAT® underfloor heating is one of the most energy efficient means of heat delivery in
existence.
Figure 1
INSTALLATION INTO BATHROOMS AND WET AREAS
MYHEAT® Classic heating mats have an earthed metallic sheath beneath their outer
jacket.
MYHEAT® complies fully with the requirements of Section 701.753 of the IEE wiring
regulations BS 7671:2008 and may be embedded in the floor below any zone of the
bathroom or shower room. Naturally, MYHEAT® Classic is the latest twin conductor
design that complies with the very latest EMC and electrical safety standards. Although
we design and make our products in our UK factory we have them tested by KEMA.
MYHEAT® Classic has a single earth-sheathed 3 metre long ‘cold tail’ connections lead
(only one connection cable to the thermostat).
MYHEAT® - Technical Data
• Voltage: 230V ~ 50Hz.
• Protection against electric shock: Class 2.
• Earth shield.
• 1.0 mm2 csa connection lead < 1600 Watts.
• 1.5 mm2 csa connection lead > 1600 Watts.
• Dielectric strength: 4000V dc between conductors and earth.
• Leakage current between conductors and earth: < 0.5 mA.
• Insulation resistance: > 50 Meg. ohms at 500V dc Megger test.
See page5 for product listing.
For more details visit:
www.myheat.co.uk
12
Underfloor Heating - MyHeat
MYHEAT® Radiant Heating Film
MYHEAT® Radiant Heating Film is the modern and easy way to install comfortable floor
heating systems that last for decades, requires no maintenance and provides significantly
lower running costs than alternative heating systems (such as ducted warm air, oil or gas
fired systems with traditional hot water radiators).
Probably providing greater comfort than any other heating system, MYHEAT® Film is the
most efficient means of heat delivery in existence. It is a low temperature system which
emits radiant heat energy (like that from the sun) to provide unrivalled comfort. Allergy
sufferers will benefit from the near absence of air circulation, dust and dryness
associated with traditional heating systems.
Installed as part of a refurbishment or new-build project, MYHEAT® Film radiant floor
heating can be mounted on top of concrete or timber subfloors or built into floors so that
you can apply any finish that you wish. It is ideal for installation where the intended floor
finish will be a floating hardwood, wood laminate or wooden parquet floor. It is also
equally suitable for carpets, vinyl, Hessian, ceramic tiles and just about any floor finish
that you wish.
MYHEAT® - Technical Data
• Voltage: 230V ~ 50Hz
• Output rating: 130 W/m2
•
•
•
•
•
•
•
•
•
•
Radiant energy: Far Infrared 5-20 microns (?m)
Insulation strength: 3000V between conductors and earth.
Leakage current between conductors and earth – 0.01 mA
Protection against electric shock: basic insulation.
1.5 mm2 csa x 3m long Brown (L) connection lead
1.5 mm2 csa x 3m long Blue (N) connection lead
Approved to safety standard BS EN 60335-1:2002
Complies with Low Voltage Directive 2006/95/EC
Complies with EMC Directive 89/336/EEC
CE marked and complies with all relevant standards
MYHEAT® 3000
MH3000
The 16 Amp Fully Programmable Thermostat and
Programmer is designed to provide an energy efficient system which provides the highest
levels of comfort and economy combined with energy savings.
WE’VE THOUGHT OF EVERYONE
MYHEAT® 3000 is ideal for installers as they can select the desired controller function ‘onsite’. If the customer wants a basic manual thermostat the installer can simply change the
slider switch setting. If the customer changes their mind it can easily be re-set as a fully
programmable controller again using the slider switch or the menu based program.
•
•
•
•
•
•
•
•
•
•
•
I/O button to switch ON ~ OFF.
Tamper proof lock for controls (2 levels).
Protected against loss of data during power cuts.
Frost protection to 5°C.
Floor temperature range 10°C to 45°C.
Room temperature range 5°C to 35°C.
Stand by power < 500 mW (1/2Watt).
Voltage 230/240V: 50Hz.
Dimensions: 86 x 86 x 55 mm.
Shows when replacement battery is required.
Floor sensor (3m lead) supplied.
Also available in a silver finish - MHSILVER.
13
Underfloor Heating - MyHeat
MYHEAT® 20W Screed Kits
This professional electric underfloor heating kit is the ideal solution for screeded floors in
conservatories and new build or refurbishment extensions.
MYHEAT® 20W Screed Kits complete with:
• MYHEAT® 3000 fully programmable thermostat.
• MYHEAT® In-screed heating cable rated 20W/m.
• Screed Fix™ Galvanised steel fixing strip.
• Floor sensor to measure temperature.
• Flexible conduit for floor sensor.
• Heavy duty adhesive tape.
• Full installation instructions supplied.
Easy Planning and Installation.
• Choose the kit that suits the application.
• Prepare the sub-floor.
• Plan the cable runs and site the thermostat.
• Secure Screed Fix™ fixing strip.
• Lay the heating cable at the correct spacing.
• Secure the heating cable to the Screed Fix™.
• Run the cold tail cable through conduit to the thermostat.
• Install the floor sensor and run the conduit to the thermostat.
• Get an electrician (Part P qualified) to connect up to the mains.
MYHEAT® Cable Kits
The popular MYHEAT® Cable Kits contain everything that you may need in one carton:
1 - MYHEAT® Thermostat
2 - 15W/m heating cable
3 - conduit for floor sensor
4 - Vysa-Bond™ PVA primer
5 - paint roller for primer
6 - waterproof strong adhesive tape
MYHEAT® Cable Kits are versatile because you can choose a cable spacing to provide
the appropriate power rating and, they suit rooms with irregular floor areas where a
heating mat might be awkward to lay.
MYHEAT® Thermal Insulation
MYHEAT® thermal insulation - must be laid before you install radiant underfloor heating
system. 6mm thick insulation provides:
• Protection against the heating elements being damaged.
• Prevention of heat losses into the sub-floor.
• Channels can be cut for wiring runs and floor sensor.
• Sound insulation to ‘quieten’ laminate floors.
MYHEAT® Mirror Demister
With MYHEAT® Mirror Demister installed behind your mirror and connected to the
bathroom lighting circuit you can view a clear mirror even though the bathroom is full of
steam.
MYHEAT® Mirror Demister will fit on most types of mirrors. On large mirrors several mirror
demisters can be combined to cover a larger area. Self-adhesive backing to the heater
pad sticks directly to the mirror. Connect to the existing room light circuit so that the
heater pad operates automatically when the light is switched on.
ASK IN BRANCH FOR PRODUCT LISTING AND FURTHER SPECIFICATION ON ALL
PRODUCTS ON THIS PAGE.
14
Underfloor Heating - MyHeat
MYHEAT® Classic Heating Mats
MYHEAT® Radiant Heating Film
100 W/m 2 for wooden floors
MYHEAT® Film 50 Width 500mm including 20mm selvage/side
0.5m Wide
Order code
MH4000
MH4001
MH4002
MH4003
MH4004
MH4005
MH4006
MH4007
MH4008
MH4009
MH4010
MH4011
Area to be heated
(m 2)
Heating Load
(W)
1.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
100
150
200
250
300
400
500
600
700
800
900
1000
Order code
MH4036
MH4037
MH4038
MH4039
MH4040
MH4041
MH4042
MH4043
MH4044
MH4045
MH4046
MH4047
MH4048
MH4049
MH4050
Length (m)
Heat (W)
Line Amps
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
65
98
130
163
195
228
260
293
325
358
390
423
455
488
520
0.27
0.41
0.54
0.68
0.81
0.95
1.08
1.22
1.35
1.49
1.63
1.76
1.9
2.03
2.17
MYHEAT® Film 80 Width 800mm including 30mm selvage/side
150 W/m 2 for concrete floors
0.5m Wide
Order code
MH4012
MH4013
MH4014
MH4015
MH4016
MH4017
MH4018
MH4019
MH4020
MH4021
MH4022
MH4023
Order code
Area to be heated
(m 2)
Heating Load
(W)
1.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
150
225
300
375
450
600
750
900
1050
1200
1350
1500
MH4051
MH4052
MH4053
MH4054
MH4055
MH4056
MH4057
MH4058
MH4059
MH4060
MH4061
MH4062
MH4063
MH4064
MH4065
Length (m)
Heat (W)
Line Amps
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
104
156
208
260
312
364
416
468
520
572
624
676
728
780
832
0.43
0.65
0.87
1.08
1.3
1.52
1.73
1.95
2.17
2.38
2.6
2.82
3.03
3.25
3.47
MYHEAT® Film 100 Width 1010mm including 20mm selvage/side
Order code
Length (m)
Heat (W)
Line Amps
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
130
195
260
325
390
455
520
585
650
715
780
845
910
975
1040
0.54
0.81
1.08
1.35
1.63
1.9
2.17
2.44
2.71
2.98
3.25
3.52
3.79
4.06
4.33
200 W/m 2 for concrete floors and high heat loss areas
0.5m Wide
Order code
MH4024
MH4025
MH4026
MH4027
MH4028
MH4029
MH4030
MH4031
MH4032
MH4033
MH4034
MH4035
Area to be heated
(m 2)
Heating Load
(W)
1.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
200
300
400
500
600
800
1000
1200
1400
1600
1800
2000
MH4066
MH4067
MH4068
MH4069
MH4070
MH4071
MH4072
MH4073
MH4074
MH4075
MH4076
MH4077
MH4078
MH4079
MH4080
15
Towel Rails
Is there any better feeling than stepping out of the shower to a warm, snug towel on a winter’s morning? There are many shapes, sizes and finishes
but they all keep you as snug as a bug in a rug!
TR Range
B
TR Range
TR range towel rails are permanently liquid filled for
maintenance free operation. They can be mounted for
left or right hand cable entry. No plumbing. No problems.
And they can be left switched on indefinitely.
• Choice of sizes and finishes.
• Oil filled
A
• Larger models will help to take the chill off a small bathroom or cloakroom.
• Mains neon indicator.
• Splash-proof (IPX4 rated) for use in bathrooms and other wet areas.
C
• All models can be mounted for left or right hand cable entry.
• Supplied with wall mounting brackets as standard.
• Feet available as an optional extra on selected models.
• Models TRC90/W and TRS120/W not suitable for floor standing.
Code
TRC90/W
TRC130/W
TRS120/W
Wattage
60W
90W
120W
A
B
C
Finish
616mm
851mm
616mm
533mm
533mm
533mm
93mm*
93mm*
93mm*
Chrome
Chrome
White
• Models TRC90/W and TRS120/W weight: 3.4 kg
• Model TRC130/W weight: 4.2 kg
* Including wall bracket. Depth with feet 165mm.
C
Daytona Range
B
DTR Range
New energy saving ladder style using the unique
DrytechTM Technology, available in sparkling chrome plated
or powder white finish.
ENERGY SAVING FEATURES:
A
• Unique DryTech™ Technology.
• Faster warm-up than conventional towel rails.
• Provides more heat from a lower output and is therefore more energy efficient.
OTHER FEATURES:
• Entirely liquid free – no leakage, no rusting.
• Even heat distribution – no cold spots.
• Rapid towel drying.
• Compact, slimline design.
Code
DTR175W
DTR350W
DTR175C
DTR350C
Wattage
175W
350W
175W
350W
A
B
C
Finish
610mm
843mm
610mm
843mm
453mm
602mm
453mm
602mm
80-100mm
95-115mm
80-100mm
95-115mm
White
White
Chrome
Chrome
• Lightweight for faster, easier installation.
• DTR175 models: 4.4 kg
• DTR350 models: 7.9 kg
16
Towel Rails
B
Electric Towel Radiators
Curved Style
CURVY Range
The stylishly designed dual energy towel radiators add a
modern touch to conventional bathroom heating and
combines practicality with the luxury of a warm
dry towel at any time.
A
• Electric element is ideal for use in summer when
main central heating is switched off.
• Can be drained for use with central heating systems.
• Easy installation, supplied complete with electric element
and filled, heating element and wall brackets.
C
Code
Wattage
CURVY Range 400W
A
B
C
Weight
• Available in White (CURVY/W) or Chrome (CURVY/C) with a generous 400W rating.
764mm
500mm
105-135mm*
13.1 kg
* When mounted on the wall can be adjusted between these two dimensions.
B
Stainless Steel
Heated Towel Ladder
RTL130ST03
• Stainless steel body.
A
• Dries and warms towels.
• Brackets and screws supplied for wall
or vertical surface mounting.
• Suitable for use in Bathroom Zone 2.
C
Code
Wattage
RTL130ST03
75W
A
B
C
Weight
730mm
500mm
100mm
4.0 kg
B
95W Chrome Effect Towel Rail
• Sealed power switch, built in power indicator.
• Polished chrome effect.
• Small neat design.
A
• Metal brackets. 2m cable. 13A plug. Fixing Kit included.
• Suitable outside of Bathroom Zones 1 & 2 if hardwired.
• IP21 rated.
• BS EN 60335-2-43.
C
Code
TR95W
Wattage
95W
* 95mm with fittings
A
B
C
Weight
615mm
545mm
28mm*
3 kg
17
TR95W
Overdoor, Screen & Plinth Heaters
Our powerful screen heaters provide a curtain of warm air at the entrance to offices, shops and show rooms. The heaters add heat where it is being
lost when external doors are opened on a frequent basis. Plinth heaters are sturdy and long-lasting, providing the ideal solution when floor space is
limited or portable heaters are impractical.
B
C
Overdoor Heaters
AC3
• Provides a ‘warm welcome’ above
single/double doorways.
A
• Integral control over full heat, half heat
& fan only settings.
AC3RN
• Adjustable air flow direction.
Code
AC3
AC3RN
Wattage
A
1500/3000W 200mm*
1500/3000W 200mm*
B
C
Weight
• Can be used as a high level fan heater.
605mm
605mm
135mm
135mm
5.1 kg
5.3 kg
• Also available the AC3RN - for use in single doorways
with the increased convenience of an infra-red
remote control.
* Add 14mm for total installed height.
B
Screen Heater
C
SH3WH
• Adjustable bracket to direct heat.
A
• 1.5kW or 3kW output.
• Heat setting options with cool & hot air operation.
• Fitted with 1.25 metre 3 core cable.
• Safety cut out should the unit overheat. Resets itself once the unit has cooled down.
Code
Wattage
A
B
C
Weight
580mm
180mm
6 kg
• Can be wall or ceiling mounted.
SH3WH
3000W (max) 105mm
• IP20 rated.
Plinth Heater
• 3 heat settings: 800W, 1600W & 2400W.
• Thermostatically controlled with thermal cut out.
• Brown, White and Steel fascia included.
• Four rubber feet - no vibration - easy to install.
• Pre-wired with 1.5 metres of cable.
Code
PFH2400
Wattage
A
2400W (max) 125mm
B
C
Weight
480mm
220mm
4.84 kg
18
PFH2400
Portable Heaters
Small, portable, quick to use and great value. Unlike the convection type, they’re great for heating up a room you were not planning to use - maybe
when an unexpected guest comes to stay.
B
1.2kW Halogen Heater
1.2KWHALOG
• Instant heat halogen technology.
• UV stop tubes prevent harmful radiation.
• Thermal and stability safety cut-out.
A
• Low running costs.
• Base dimensions: 410mm (w) x 310mm (d)
Code
1.2WHALOG
Wattage
A
B
C
Weight
1200W
550mm
340mm
110mm
3.7 kg
C
2kW Fan Heater with Stat
2KWFAN
B
• 2 heat settings: 1000W low, 2000W high.
• Cool blow facility.
• Adjustable thermostat.
A
• Carry handle.
• Overheat safety cut-out.
• Frost protection setting.
C
Code
Wattage
A
B
C
Weight
2KWFAN
2000W
130mm
240mm
240mm
1.5 kg
B
3kW Fan Heater with Stat
3KWFAN
• Thermostatically controlled with frost protection.
• Choice of 2 heat settings.
A
• Cool air setting for summer use.
• Overheat protection.
C
19
Code
Wattage
A
B
C
Weight
3KWFAN
3000W
238mm
247mm
184mm
1.3 kg
Convector Heaters
Silent, instant heat from a small portable source, which is great for the times when the central heating is not yet needed. We also do a turbo version
that has a built-in fan to give you an added boost. Both are controlled by a stat so when you get that cosy feeling, it turns off and saves you money.
B
2kW Convector Heater
C
2KWCONVECT
• 2kW Convector heater.
• 3 heat settings: 750W, 1250W & 2000W.
• Adjustable thermostat.
• Frost guard protection.
A
• Free standing or wall mounted using brackets supplied.
• 3 Year guarantee.
• White/grey colour.
• Other versions are also available.
Code
Wattage
2KWCONVECT 2000W
A
B
C
Weight
425mm
585mm
200mm
4.2 kg
2kW Turbo Convector Heater
B
C
2KWTURBO
• 2kW Turbo convector heater.
• 3 heat settings: 750W, 1250W & 2000W.
• Illuminated control switches.
• Fully adjustable thermostat for effective heat control.
A
• Frost guard protection.
• Turbo boost gives heat at the flick of a switch.
• Secure wall mounted option c/w wall brackets and fixings.
• 2kW version is also available with timer.
Code
2KWTURBO
20
Wattage
A
2200W (max) 425mm
B
C
Weight
585mm
200mm
4.9 kg
Oil Filled Radiators
Oil filled radiators with a totally enclosed heating element provide a safe and reliable source of heating for both domestic and commercial
applications. This range of oil filled radiators provide radiant heat, with the internal thermostat controlling its ouput once the required room
temperature has been reached. Their manoeuvrability makes them very versatile, and no moving parts means they are silent in operation
and are great for people who suffer from dust allergies.
B
Oil Filled Radiators
C
1.5KWOIL
• 1.5kW and 2kW power.
• 3 heat settings.
2KWOIL
• Adjustable thermostat.
• Overheat protection.
• Frostguard protection.
• Illuminated control switches.
• Easy grip handle and cord storage for portability.
• Compact design.
A
• Safety tip over switch.
• Omni-directional castors for ease of use.
• Timer version: 2KWOILTIM
• Fins: 1.5KWOIL 7 fins, 2KWOIL 9 fins, 2KWOILTIM 9 fins.
Dimensions
Code
Wattage
A
B
C
Weight
1.5KWOIL
2KWOIL
1500W
2000W
450mm
485mm
690mm
690mm
170mm
170mm
10 kg
12 kg
Settings
B
Code
Wattage
Heat Settings
Timer
1.5KWOIL
2KWOIL
1500W
2000W
600W, 900W, 1500W
800W, 1200W, 2000W
No
No
C
A
2KWOILTIM
Dimensions
Code
2KWOILTIM
Wattage
A
B
C
Weight
2000W
485mm
170mm
690mm
12 kg
Settings
Code
2KWOILTIM
21
Wattage
Heat Settings
Timer
2000W
800W, 1200W, 2000W
Yes
Halogen/Infra-Red Heaters
Good old fashioned heat from heaters that have been used for a long time, if you need a small wall mounted heat source with long life - this is it!
Ideal for rooms like the garage, these heaters provide a heating system with low energy intensity; an immediate effect on thermal comfort, which is
safe, quiet and requires minimal maintenance. The heaters provide directional heat and only warm surrounding persons and objects and not the air,
making them very economical to run.
B
C
IRX1200
A
Infra-Red Heater
Code
Wattage
A
B
C
Weight
IRX1200
1200W
91.5mm
750mm
75mm
2 kg
The IRX1200 is a practical source of heat in bathrooms, kitchens, work areas
- anywhere where fast localised heating is required.
• Designed to provide rapid beamed warmth, adjustable beam angle to
direct heat where it is needed.
• IPX3 rated - drip proof protection.
• 1200 Watt
Halogen Heater
HN-1500
Typical installations include: Loading bays, warehouses,
sports halls, churches and community halls, spectator
heating at sports grounds and open-air venues.
• Instant response & directional, thus it
only heats the area required.
• Easy low cost installation.
• 1500W linear tungsten halogen lamp.
• Choice of ruby or neutral density (gold glow) lamps.
• Metal protective guard.
Code
Wattage
A
B
C
Weight
• Heavy gauge metal case epoxy coated.
HN-1500
1500W
175mm
420mm
110mm
3.8 kg
• IP22, Class 1
Thermologika Heater
B
70002
Suitable for use in homes and business, particularly
when instant heat is required or if the room is in direct
contact with the outdoors. The Thermologika Heater works
like solar radiation, whereby solid bodies are directly heated
by radiated infra-red rays, travelling at the speed of light.
A
• No moving parts and no noise.
• Takes about 30 seconds to warm up.
• Double pole pull switch to select any of the three heat settings (600/1200/1800W).
C
• Complies with CEI EN 60335-2-30 standard.
• Easy installation and maintenance.
Code
70002
Wattage
A
B
C
Weight
• Has splashproof protection and can be installed in rooms with high relative humidity.
1800W
123mm
540mm
100mm
1.6 kg
• Directional heat delivery.
22
Outdoor Patio Heaters
These radiant heaters provide highly directional heat; the majority of which heats people and not the air around them. This makes them highly
efficient outdoors and kind to the environment. The 1.3kW model can be used for as little as 10p an hour*, whilst the 2kW runs from a meagre 14p
an hour*. Both are IPX4 rated. With a rugged yet attractive aluminium case, they are built to last and come with a strong steel wall bracket as
standard. Designed with a single Philips element, the 2kW is a halogen version that makes for a greater performance for those larger patios.
Outdoor Patio Heaters
B
OPH13
ENERGY SAVING FEATURES:
• Energy efficient heaters that heat people without
heating the air around them for a cost effective solution.
OPH20
• Low energy user (2kW) giving substantially
reduced emissions compared to gas heaters.
C
OTHER FEATURES:
A
• High quality aluminium case finished in two-tone silver.
• 1.3kW Quartz Infra-red model.
• 2.0kW Quartz halogen model with "gold" lamp for extended performance.
• Designed and rated for permanent external installations.
• Instant heat - avoiding the need for expensive pre-heating.
• Costs as little as 10p per her hour* to run.
• In-situ' lamp replacement for minimum downtime.
• Fitted guard included.
• Optional mounting kit for hanging or pole/mast
mounting available but not included.
• Weight: 3.4Kg
* Information for guidance only and is dependant on tariff.
Code
OPH13
OPH20
Wattage
A
B
C
Element
1300W
2000W
159mm
159mm
594mm
594mm
144mm
144mm
Infra-red
Halogen
Weatherproof Timer
B
Ideal for use with the OPH range, the MRT-16/WP
has an adjustable time delay period which can be
set up to time out between a few seconds and
2 hours. Dependant on the type of load connected,
the unit is rated as follows:
A
• For resistive loads = 16 Amps (max)
• For lighting loads = 10 Amps (incandescent lighting)
• 6 Amps (fluorescent)
C
Code
Wattage
A
B
C
95mm
95mm
54mm
• 3 Amps (compact fluorescent)
The enclosure is rated IP66.
MRT-16/WP
-
23
MRT-16/WP
Tubular Heaters and Guards
Tubular heaters are the ideal solution when low cost heating is required for domestic or commercial applications.Typical applications include
garages, workshops, greenhouses and conservatories. Wire guards are strongly recommended for use with the above, where the heater could be
exposed to small children or the elderly for added safety.
Tubular Heaters
THFT Range
• Steel construction
• Thermal overload cut out.
• Pre-wired with 1.8m of cable and 3 pin plug.
• Link facility
• Suitable for bathroom Zone 2 if hardwired.
• IP44 rated
• White
• Mounting kit for wall or floor mounting included.
Code
Wattage
TH1FT060
TH2FT120
TH1FT180
TH1FT240
60W
120W
180W
240W
Width
Diameter
Weight
305mm
600mm
915mm
1220mm
55mm
55mm
55mm
55mm
1.06 kg
1.69 kg
2.45 kg
3.25 kg
Guards
• Steel construction
B
• Provides sturdy protection to tubular heaters.
• Fixing kit supplied.
• White
A
• Standard: CE
C
Code
A
B
C
Weight
THG1FT
THG2FT
THG3FT
THG4FT
125mm
125mm
125mm
125mm
325mm
630mm
920mm
1230mm
150mm
150mm
150mm
150mm
0.65 kg
1.35 kg
1.95 kg
2.65 kg
24
THG Range
Frost Protection
The perfect solutions to protect your property and piping from frost and freezing conditions.
B
400W Convector Heater
FPC500
• Metal case
• Wall mounted
• Thermoplastic
• Control lamp
A
• White
• The thermostat switch automatically switches the frost detector on/off.
• Thermostat operates within the range of + 5ºC to 30ºC (approx).
• The thermal cut-out will turn the heater off should it overheat.
C
Code
FPC500
Wattage
400W
A
B
C
Weight
242mm
260mm
105mm
0.83 kg
Frost Protection Heat Tape
PGE Range
• Designed for the protection of hot and cold water
pipes that may be subject to freezing conditions.
• Ideal for single pipes (i.e. in domestic lofts or gardens).
• High grade alloy resistance wire, fully moisture-proof.
• Built in thermostat set to switch on when the pipe temperature falls below 3ºC.
(Available in other lengths and wattages)
PGE Range
Code
PGE-01
PGE-02
PGE-04
PGE-08
PGE-12
PGE-14
PGE-18
PGE-24
PGE-37
PGE-49
Wattage
Volts
Heated Length
Weight
17W
35W
71W
117W
187W
230W
275W
373W
550W
735W
230
230
230
230
230
230
230
230
230
230
1m
2m
4m
8m
12m
14m
18m
24m
37m
49m
0.4 kg
0.5 kg
0.6 kg
0.8 kg
1.0 kg
1.1 kg
1.3 kg
1.5 kg
2.3 kg
3.0 kg
PGE Selection Table Showing Minimum Required Watts Per Metre
Pipe
Diameter
25
12mm
Insulation Thickness
25mm
12/15
25
32
40
8
12
14
16
6
7
8
9
50
75
100
150
18
25
30
46
10
14
17
25
Water Heating
The Dimplex Ascari® flow boiler offers the convenience of wet central heating wherever there is mains electricity. It is the ideal option where a wet
central heating system is desirable but other fuel types are not available or impractical because of flueing restrictions, for example in flats or
apartments.
The Ascari®
Electric Central Heating Boiler
ASCARI
The Ascari can be sited anywhere within a property as it has no flue and it is not subject
to annual safety checks, as with a traditional gas boiler installation.
With a host of features including near silent operation, stainless steel elements and a cast
iron heat exchanger, as well as the ability to automatically modulate down to 4kW
depending on the heating load and heat requirements of the property, it ensures
extensive trouble free operation and minimal servicing.
ENERGY SAVING FEATURES:
• Autoadaptability - reduces heating system water temperature according to heat
requirements of property, minimising energy input, smooths temperature variation of
the home and on/off cycling of the boiler.
• Selectable heating system water temperature between 21ºC and 80ºC allows low
energy settings of heating system.
B
OTHER FEATURES:
• Best suited for use as a heating-only boiler with either radiators
or wet underfloor heating.
• Can also be used for sanitary hot water supply.
• Power selection 4-12kW.
• Includes 8 litre expansion vessel, 3bar pressure relief valve
and 3-speed pump for quick easy install.
• Near silent operation 38dBA
• Frost and pump protection
A
• Digital temperature and pressure display.
• Top or bottom cable entry.
• Ideal for well insulated properties of up to 80m2.
• 3 year guarantee on storage tank and 2 years on components.
• Low maintenance and no requirement for annual safety check.
C
Code
ASCARI
Wattage
4000-1200W
A
B
C
Weight
620mm
405mm
208mm
38 kg
26
Solar Thermal Hot Water
The new solar thermal hot water system from Dimplex offers a range of 15 packaged kits designed for the individual needs of UK homes making
specification simple and installation easy.
Solar Thermal Hot Water
SOL KITS
The new Dimplex Solar package is made simple by
combining all the components into easy to purchase kits
containing all the nessasary solar components needed for a standard installation. Each
component has been carefully selected for its quality and suitability to the UK climate.
With a range of cylinder sizes suitable for each property and a selection of roof mounting
options the Dimplex solution has an answer for every solar water heating requirement.
Every year the sun provides over 8000 times as much energy as we consume worldwide
and with the ever-increasing evidence of climate change, it is essential that we reduce
carbon dioxide emissions for the future of the planet. Not only will a solar thermal water
heating package help the environment but it will also make use of the free energy from
the sun, thereby providing a positive contribution to running costs. A solar system can
provide as much as 60%* of the total hot water used per year absolutely free!
* Subject to installation and property location.
Due to the requirements of the Code for Sustainable Homes and current and forthcoming
building regulation, it is becoming increasingly important to provide properties with low
energy losses. The use of a solar thermal water heating system in the building design
reduces energy consumption from other fuels,reducing the carbon dioxide emissions of
the property. These all help with getting the building to comply with the regulations.
Dimplex solar thermal hot water is ideal for all types of properties – from new build flats
through to social housing refurbishment.
• Complete solar hot water package – including 2, 4 and 6m2 collector kits,
heat transfer system, full range of installation accessories and choice of
solar hot water cylinders.
• Purpose designed solar cylinders with high efficiency coils, fully optimised for solar
water heating. Choice of options for electric heating or boiler based systems.
• Choice of roof mounting options for slate, tile or flat roofs or integrated
flush roof mounting.
• Separate control and pump station allowing flexible and convenient installation
in relation to the cylinder.
• 25 year solar cylinder warranty.
• 10 year solar collector warranty.
Join the club!
Become a Dimplex Accredited Solar Installer
Dimplex will shortly be announcing their new Accredited Solar Installer Scheme, which
contractors can join after they have completed one of their Solar training courses.
New courses will be announced shortly but you can register your interest now
and Dimplex will keep you informed of dates and details.
Please email – training@dimplex.co.uk or ring 0845 600 5111.
27
Denmans/Clearlight branch information
Denmans Branches
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
62.
63.
64.
65.
66.
67.
68.
69.
70.
71.
72.
73.
ACCRINGTON
BASILDON
BANBURY
BARNSLEY
BARNSTAPLE
BATH
BECCLES
BIRMINGHAM
Bordesley Green
Perry Barr
BOURNEMOUTH
BRACKLEY
BRAINTREE
BRISTOL
Bradley Stoke
Central
Redland
BURTON ON TRENT
BURY ST. EDMUNDS
CHELTENHAM
CHESTERFIELD
COVENTRY
CWMBRAN
DONCASTER
DORCHESTER
DUDLEY
ERDINGTON
EXETER
FALMOUTH
GLOUCESTER
HEREFORD
HIGH WYCOMBE
ILFORD
IPSWICH
KETTERING
KIDDERMINSTER
KING’S LYNN
KINGS HEATH
LEIGHTON BUZZARD
LIVERPOOL
Sandon Ind Estate
Boaler Street
LONG EATON
LOUGHBOROUGH
MACCLESFIELD
MANCHESTER
MANSFIELD
MELKSHAM
NEWTON ABBOT
NORTHAMPTON
NORWICH
NOTTINGHAM
OXFORD
PAIGNTON
PENZANCE
PLYMOUTH
POOLE
PRESTON
SALISBURY
SALTASH
SKELMERSDALE
SOUTHAMPTON
SOUTHPORT
ST AUSTELL
STROUD
TAUNTON
TELFORD
THETFORD
TIVERTON
WALSALL
WELLINGBOROUGH
WESTON-S-MARE
WIRRAL
WOLVERHAMPTON
WORCESTER
WREXHAM
STD Code
Phone no.
Fax No.
Postcode
email address
01254
01268
01295
01226
01271
01225
01502
383421
418181
259993
388948
374771
444644
715621
871065
541277
267549
387608
374774
421122
717593
BB5 1EF
SS15 6ED
OX16 2RB
S75 1JU
EX31 1QN
BA1 3EU
NR34 7TQ
accrington@denmans.co.uk
basildon@clearlight.co.uk
banbury@denmans.co.uk
barnsley@denmans.co.uk
barnstaple@denmans.co.uk
bath@denmans.co.uk
beccles@denmans.co.uk
0121
0121
01202
01280
01376
7666788
3565266
547396
705070
323816
7714124
3443219
537238
702433
346418
B9 4TA
B42 1BX
BH9 3AQ
NN13 7LE
CM7 2GB
bgreen@denmans.co.uk
perrybarr@denmans.co.uk
bournemouth@denmans.co.uk
brackley@denmans.co.uk
braintree@denmans.co.uk
01454
0117
0117
01283
01284
01242
01246
02476
01633
01302
01305
01384
0121
01392
01326
01452
01432
01628
0208
01473
01536
01562
01553
0121
01525
201320
9559959
9737639
531230
752481
226369
556831
683678
483666
328285
265522
455244
3825050
447744
373900
529546
357251
533333
5038866
622100
513152
740707
768287
4447721
374666
617074
9351095
9734553
512958
725712
226865
556282
683699
483832
341379
262959
213550
3777881
447100
375600
302134
263709
533400
5038877
623500
411367
755184
775642
4447936
852662
BS32 4EU
BS5 0BX
BS6 6EZ
DE14 3LX
IP32 7BX
GL51 8LZ
S40 3DL
CV6 4AZ
NP44 3AS
DN2 4PE
DT1 2PG
DY1 1RB
B23 6UJ
EX2 5GL
TR10 9DQ
GL1 3QA
HR4 9NS
HP10 9RS
IG3 8RN
IP5 3RG
NN16 0QZ
DY10 1HT
PE30 4HY
B14 7BB
LU7 4TZ
bradleystoke@denmans.co.uk
bristolcentral@denmans.co.uk
redland@denmans.co.uk
burtonontrent@clearlight.co.uk
burystedmunds@denmans.co.uk
cheltenham@denmans.co.uk
chesterfield@denmans.co.uk
coventry@denmans.co.uk
cwmbran@denmans.co.uk
doncaster@denmans.co.uk
dorchester@denmans.co.uk
dudley@clearlight.co.uk
erdington@clearlight.co.uk
exeter@denmans.co.uk
falmouth@denmans.co.uk
gloucester@denmans.co.uk
hereford@denmans.co.uk
wycombe@denmans.co.uk
ilford@clearlight.co.uk
ipswich@denmans.co.uk
kettering@denmans.co.uk
kidderminster@denmans.co.uk
kingslynn@denmans.co.uk
kingsheath@clearlight.co.uk
leighton@denmans.co.uk
0151
0151
0115
01509
01625
0161
01623
01225
01626
01604
01603
0115
01865
01803
01736
01752
01202
01772
01722
01752
01695
02380
01704
01726
01453
01823
01952
01842
01884
01922
01933
01934
0151
01902
01905
01978
2073787
2647171
9464838
240875
612378
8724994
655990
703102
367733
621711
412300
9266341
725500
663380
350221
220871
692868
822052
341263
844023
720444
773831
532261
66171
764542
337451
290047
755927
242023
646353
226062
412067
3344372
453551
616886
291186
2074782
2603500
9464784
240876
612872
8737564
655988
790166
367744
631391
412002
9670864
725580
663848
350281
601429
692128
258576
349662
847728
50281
777637
500227
68973
753341
336499
290249
752390
242003
723134
441370
620246
3348819
456666
616692
261683
L5 9YN
L6 9DF
NG10 2DD
LE11 5GU
SK10 2BN
M17 1RW
NG18 5ES
SN12 6SS
TQ12 4PB
NN1 2TN
NR6 5DR
NG5 6LJ
OX2 0ES
TQ4 7QN
TR20 8HT
PL4 0LE
BH17 7BP
PR1 1QE
SP2 7PU
PL12 6LE
WN8 8EB
SO15 OLA
PR9 0SF
PL25 5NE
GL5 3JX
TA1 1RS
TF3 3DG
IP24 1HS
EX16 6SR
WS2 9NW
NN8 2DA
BS23 3PZ
CH62 3QL
WV1 2XD
WR1 2RS
LL11 2UB
bootle@denmans.co.uk
merseyside@denmans.co.uk
longeaton@denmans.co.uk
loughborough@denmans.co.uk
macclesfield@denmans.co.uk
manchester@denmans.co.uk
mansfield@denmans.co.uk
melksham@denmans.co.uk
newtonabbot@denmans.co.uk
northampton@denmans.co.uk
norwich@denmans.co.uk
nottingham@denmans.co.uk
oxford@denmans.co.uk
paignton@denmans.co.uk
penzance@denmans.co.uk
plymouth@denmans.co.uk
poole@denmans.co.uk
preston@denmans.co.uk
salisbury@denmans.co.uk
saltash@denmans.co.uk
skelmersdale@denmans.co.uk
southampton@denmans.co.uk
southport@denmans.co.uk
staustell@denmans.co.uk
stroud@denmans.co.uk
taunton@denmans.co.uk
telford@denmans.co.uk
thetford@denmans.co.uk
tiverton@denmans.co.uk
walsall@clearlight.co.uk
wellingborough@denmans.co.uk
weston@denmans.co.uk
wirral@denmans.co.uk
wolverhampton@denmans.co.uk
worcester@clearlight.co.uk
wrexham@denmans.co.uk
Denmans Branches
Clearlight Branches
Call in to your local branch today
www.denmans.co.uk
for a great deal!
Proud to support
DENMANS ELECTRICAL WHOLESALERS LTD
AND CLEARLIGHT ELECTRICAL COMPANY LTD
TERMS AND CONDITIONS
All items subject to availability.
Pictures for illustration purposes only.
All information for guidance only.
Due to range extensions and continuous developments,
products may vary to those illustrated.
Offers are subject to Denmans/Clearlight terms and conditions.
All prices subject to VAT.
This is only a selection of our massive range of products we can get hold of almost anything electrical!
Just ask your branch!
HEAD OFFICE:
3 Broad Plain, Bristol, BS2 0JR.
Tel: 0117 946 0077 Fax: 0117 946 0082
email: headoffice@denmans.co.uk
ACCOUNTS DEPARTMENT:
Tel: 01707 655 345 Fax: 01707 642 266
email: accounts@denmans.co.uk
THE CONNECTOR CATALOGUE
To help maintain our position as a leading and innovative supplier
of electrical installation materials, we produce the 'Connector'.
Released ten times throughout the year,
(we have a double issue in the summer and at Christmas)
it remains current and up-to-date for your convenience.
This definitive and comprehensive guide forms 40+ pages packed
with all the latest special offers, new products, promotions,
services and everyday items.
Ask your local branch for your free copy!