ptg heavy industries versa turn hollow spindle lathe

Transcription

ptg heavy industries versa turn hollow spindle lathe
BINNS & BERRY
CRAWFORD SWIFT
BINNS & BERRY
CRAWFORD SWIFT
PTG Deutschland GmbH (Europe)
Pilsener Straße 9, D-86199 Augsburg
Germany
Tel: +49 821 908983 0
Fax: +49 821 908983 20
Email: info@ptgltd.com
PTG Asia (Shanghai)
Shanghai
China
Tel: +86 136 5181 9693
Email: info@ptgheavyindustries.com
PTG Asia (Beijing)
Beijing
China
Tel: +86 136 0 1351260
Email: info@ptgheavyindustries.com
Bulat Galeev (Russian Representative)
Moscow
Russia
Tel: +7 903 109 09 23
Fax: +7 903 109 09 23
Email: info@ptgheavyindustries.com
Francis Klein
India
Kolkata 700 071
Tel: +91 33 221 719 26 / 27 / 28 / 221 715 41
Fax: +91 33 221 715 40
E-mail: fkleinkol@francisklein.in
Wyatt Machine Tools International
USA
Tel: +1 (804) 337-9433
Fax: +1 (804) 769-3682
Email: phil.wyatt@ptgheavyindustries.com
CKB Corporation (Japan)
Tokyo
Japan
Tel: +81 3 3498 2131
Email: info@ptgheavyindustries.com
PTG Heavy Industries Ltd
Bays 5 & 6, Rosemount Works,
Huddersfield Road, Elland,
West Yorkshire, UK
PTG Heavy Industries operate a
quality management system which
complies with the requirements of
BS EN ISO 9001;2008
Heavy Industries Limited.
Registered in England and Wales. Registration No. 06594872
www.ptgheavyindustries.com
001_12_PTG_HI_A4_4P_VERSA_LATHE_FINAL.indd 1-2
HX5 0EE
PTG HEAVY INDUSTRIES
VERSA TURN HOLLOW SPINDLE LATHE
Tel: +44 (0)1422 379 222
Fax: +44 (0)1422 379 122
Email: info@ptgheavyindustries.com
Part of the CQME
Group of Companies
ABSOLUTE PRECISION MAKES ALL THE DIFFERENCE
30/08/2012 20:15
BINNS & BERRY
CRAWFORD SWIFT
THE VERSA TURN SERIES
The VERSA TURN series offers a modern concept in lathe design, which
retains the traditional flat bed configuration, time proven as the optimum
between ‘stability’, ‘capacity’ and ‘cost’.
BINNS & BERRY
CRAWFORD SWIFT
STANDARD EQUIPMENT
& INSTALLATION SERVICE
The machine offered is a standard item of equipment manufactured in the
United Kingdom and featured in our range of lathes that are in current
and regular manufacture. Equipped for sliding, surfacing, contouring, and
screw cutting operations by CNC control, the machine additionally meets
the requirements for manual operations for turning and facing using power
assisted Micro-Handwheel controls.
■ Installation supervision and machine start-up
■ Electric’s to suit your supply specifications
■ Machine programming and operator training
■ Stand alone IP 55 electrical enclosure
■ Siemens 840 D switchable to MDI and manual control
■ Jog button for spindle
■ Siemens 6FT series digital AC variable frequency servo drives
■ Voltage spikes protection
■ Siemens series digital AC variable frequency spindle drive motor
■ Low lubrication indicator light on pendant
The clutchless Headstock, positioned between two 3/4 guideway beds, has
a Siemens Digital AC Spindle Drive, rated at 80 kW (107 HP) with a 450 mm
Spindle bore.
■ Siemens MMU pendant handwheel
■ Sliding chip guard and sliding chuck guard
■ Heidenhain Linear scale to X and Z axes
■ Full rear guarding
■ Spindle speeds, infinitely variable, surface speed programming
■ Surrounding coolant tray
■ Y axis with +/- 100mm of travel for both 1st and 2nd carriage
■ Three range headstock with automatic range selection
■ Electric coolant pump and fittings
■ Second carriage with Turret and extra wide, full across Saddle with
extended single piece Cross slide
■ Hardened and ground tool steel ways on X and Z axes
■ Set of foundation bolts for machine ordered
■ Heavy Duty, Interchangeable, Boring Bar Holder, 150-200mm (6-8”)
for second carriage
■ Ball screw drive for X1 and twin pinion drive for Z1 axis
■ Warranty on parts and labour
■ Ball screw drive for X2 and Z2 axis
■ 2 weeks training for 3 engineers
■ Heavy duty chip conveyor to the full length rear of the machine
■ CE Safety Standard
■ Powered Clamping of the Tailstock to the Machine Bed
■ Motorised Towing pin for Tailstock Positioning via CNC Control
■ Air-condition unit for electrical cabinet & CNC pendant
■ CNC “C” Axis with hydraulic disk brake giving 360,000 Continuous Path,
+/- .01 Degree Accuracy supplied with a separate “C” axis drive
SPECIFICATIONS
Model, Universal
Swing over bed
1000 mm
Turning diameter
800 mm
Cross travel (X axis)
550 mm
Distance between centre Z1
9100 mm
Distance between centre Z2
3000 mm
Rapid traverse rate - Z axis
6000 mm/min
Rapid traverse rate - X axis
6000 mm/min
Spindle power
80 kW (107 Hp)
Spindle nose (front)
DIN 55026
Spindle through bore
450 mm
Spindle speeds, infinite
1.5 - 550 RPM
CNC control (Seven axis)
Siemens 840 D
Turret
Chucks (2 off)
Dimensions (approx.)
PTG HEAVY INDUSTRIES VERSA TURN HOLLOW SPINDLE LATHE
001_12_PTG_HI_A4_4P_VERSA_LATHE_FINAL.indd 3-4
Versa Turn - 1000 x 9000
Disc turret 8 position (4 live)
1000 mm Ø, 4 off 2 pc ,jaw
Width 2640 mm, Length 16,400 mm, Weight 44,000 Kg
PTG HEAVY INDUSTRIES VERSA TURN HOLLOW SPINDLE LATHE
30/08/2012 20:15