Mirrors - Mill Supply

REPLACEMENT
WEST COAST MIRRORS 161
800-888-5072 • MillSupply.com
1162
600807 - 7” x 16” Stainless
W-180
60-310 7” x 16” Steel
7” x 16” Flange
Mount Mirror,
Head (White)
with 5/16” studs Aluminum. Fits
International
‘S’ Series
ML-10-132
7 “ x 16”
Aluminum
(White) with
5/16” studs
S-158-K
S-158-KDV
6” x 16”
Aluminum
Flange Mount
with Yellow
Chevrons
6” x 16”
Aluminum
Double Vision
with Convex
Spot Mirror on
Bottom. With
Yellow Chevrons
S-158-K1
Glass Only
1159
7” x 16”
Stainless
Steel with
5/16” studs
180
7” x 16” Stainless
Steel, that fits
GMC Kodiak
w/5/16” stud
Steel Mirror Head
600682 - 7” x 16” White
600685 - 7” x 16” Black
HEATED WEST COAST MIRROR HEADS
1162H - 7”x16”
Heated Polished
Stainless Steel,
w/wire harness,
w/o plug.
6” x 12”
Aluminum
Mirror Head
with Yellow
Chevrons
1157-H - 7”x16” Heated
Polished Stainless
Steel, w/wire harness,
w/o plug.
60-345 - Same as
1157H but with harness
& plug, fits Navistar
M-616 - 7”x16”
Heated Polished
Stainless Steel,
w/wire harness,
w/o plug.
1162-IHO - 7”x16”
Heated Polished
Stainless Steel,
w/wire harness,
w/flat plug, fits
Navistar.
60-330 Driver Side
60-331 Pass. Side
7” x 16” Heated with
Bullet Plug that fits
Navistar & International
ENLARGED
VIEW OF
BULLET
PLUG
JACK NUTS
White painted steel
loop assembly with
31-1/4” mounting
centers.
6”x16” Aluminum
Mirror head with
Yellow Chevrons.
Factory assembled.
AV-13232
AV-13231
AV-13017
Part No
Size
Grip Range
AV-16235 1/4”-20 w/raintite sealer .015-.187”
AV-13017 1/4”-20
.187-.375”
AV-13231 1/4”-20 with 7/8” screw
Quan.
15
25
25
AV-14156-P
159SA - Mirror Assembly
Pair of Left & Right
For use when installing a limited quantity of Jack Nuts. Insert the
wrench between the screw and the head of the fastener, hold wrench
and run in screw to set Jack Nut. (one per pkg)
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 161
7/21/2016 3:05:19 PM
REPLACEMENT
162 DUAL
HEAD MIRRORS
800-888-5072 • MillSupply.com
Custom Wide Angle Mirror Systems for Walk-in Vans
Custom mirror systems all include 6.5” x 10” upper flat glass and
6.5” x 6” lower convex glass mirror heads. Replacement mirror
heads and glass are listed on the following page. All assemblies
come with cabfeet.
Mirror Assembly
Loop Only
35.5”
Loop Length
All Mirror
Assemblies
come with
Cab Feet.
When
ordering
loops only,
cab feet are
not included
unless
noted.
Used On Utilimaster
All Mirror Assemblies
come with Cab Feet.
12-1/2”
W7812330 - Loop Only, Span 35.5”, White (less cab feet)
Q7812330 - Loop Only, Span 35.5”, Flat Black (less cab feet)
W7901580 - Cab foot, White
Q7901580 - Cab foot, Flat Black
B -dim.
11-1/4” LOOP WITH PRESETS — with 7” ‘B’ Dimension
W-780484 - White Loop for 704032-5 Mirror (less cab feet) (each)
30” LOOPS WITH PRESETS ­— with 9” ‘B’ Dimension
712369 - LH Stainless Steel Assembly
712370 - RH Stainless Steel Assembly
T-780680-9 - Stainless Steel Loop Only (less cabfeet) (each)
W-780680-9 - White Loop Only (less cabfeet (each)
30” LOOPS WITHOUT PRESETS — with 9” ‘B’ Dimension
724007 - Stainless Steel Mirror Assembly (pair)
60-516 - Stainless Steel Loop with Cabfeet (each)
30” LOOPS WITHOUT PRESETS — with 6-1/2” ‘B’ Dimension
712633 - LH White Mirror Assembly (each)
712634 - RH White Mirror Assembly (each)
712631 - LH Stainless Steel Mirror Assembly. (each)
712632 - RH Stainless Steel Mirror Assembly. (each)
T-7808250 - Stainless Steel Loop Only (less cabfeet)
33” MIRROR ASSEMBLIES WITHOUT PRESETS
— with 6-1/2” ‘B’ Dimension
727067 - White Mirror Assembly (pair)
724008 - Stainless Steel Assembly (pair)
35-1/2” MIRROR ASSEMBLIES WITH PRESETS
— with 10” ‘B’ Dimension
713743 - LH Stainless Steel Assembly
713742 - RH Stainless Steel Assembly
713784 - S.S. Loops only with Cabfeet (pair)
Cabfeet with Hardware without Presets
757016 - White
(set of 4)
757015 - Stainless Steel
(set of 4)
W-7901580 - One Cab
foot, no hardware (white)
714958 - Mirror Assembly w/Preset, White, Pair
714959 - Left Side Mirror Assembly w/Preset, White
714960 - Right Side Mirror Assembly w/Preset, White
714961 - Mirror Assembly w/Preset, Flat Black, Pair
714963 - Left Side Mirror Assembly w/Preset, Flat Black
714962 - Right Side Mirror Assembly w/Preset, Flat Black
714964 - Mirror Assembly w/Preset, Stainless Steel, Pair
714965 - Left Side Mirror Assembly w/Preset, Stainless Steel
714966 - Right Side Mirror Assembly w/Preset, Stainless Steel
47005552 - 35.5” Mirror Loop
with 9.5” Depth. Fits Morgan
Olson, Black
9.5”
MOUNTING HARDWARE
RIVET-NUT - Designed for high speed installation of mirror
assemblies. Builds nut right into the body of the vehicle. Leave
the nut on the body for easy removal and reassembly.
M-47274 - 5/16”-18
M-39200
Rivet-nut Mounting Tool
M-39258
1/4”-20 Mandrel
M-39259
5/16”-18 Mandrel
Aluminum Rivet-Nut
Grip Range: .126”-.200”
Quantity: 25/box
M-47254 - 1/4”-20
Aluminum Rivet-Nut
Grip Range: .141”-.200”
Quantity: 40/box
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 162
7/21/2016 3:05:24 PM
REPLACEMENT
DUAL HEAD MIRRORS 163
VELVAC MIRROR HEADS & GLASS
800-888-5072 • MillSupply.com
Mirror Heads do NOT Include Clamp Kit
6.5” x 10”
FLAT GLASS HEADS
704091..... stainless steel head w/glass
704032..... white steel head w/glass
704081..... gray plastic head w/glass
704132..... white plastic head w/glass
704152..... black plastic head w/glass
703102..... gray gasket for plastic heads
702076..... glass only
6.5” x 6”
6.5” x 6”
FLAT GLASS HEADS
CONVEX GLASS HEADS
704093..... stainless steel head w/glass
704078..... white steel head w/glass
704178..... white plastic head w/glass
704159..... black plastic head w/glass
703101..... gray gasket for plastic heads
702051..... glass only, flat
704095..... stainless steel head w/glass
704077..... white steel head w/glass
704177..... white plastic head w/glass
704153..... black plastic head w/glass
703101..... gray gasket for plastic heads
702023..... new style glass for steel heads
702057..... standard glass only, convex
HEATED MIRROR HEADS
Part No.
Description
704315.....6.5” x 6” Heated S.S. Mirror Head with Convex Glass & Wire Harness
704325....6.5” x 10” Heated S.S. Mirror Head with Flat Glass & Wire Harness
704338....6.5” x 10” Flat glass for heated mirror heads. Glass Only.
747053.....Switch kit, controls 1 or 2 mirror heads. Includes: dash mounted
switch with light, terminals, wire ties, grommets and 6’ wire
SPRING LOADED PRESET REPAIR KITS
FOR EXISTING PRESET & NON PRESET LOOPS
Each kit contains:
•Hex Head Pivot Bolt
•Two Flat Washers
•Retaining Cap
•Nylon Washer
•Tension Spring
•Rivet Plate
•Lock Plate
•Int/Ext Lock Washer
•Elastic Locknut
•Instructions
712979 Standard Spring
Preset Kit.
Replacement kit for mirrors
with standard Velvac spring
preset and used to upgrade
mirrors with rubber washer Repair worn detents on newer trucks or install preset
feature on loops that never had it.
preset.
748355 Heavy Duty
Spring Preset Kit
Improves holding force on
mirrors with large loops or
large heavy mirrors head
combinations.
If the rivets (detents) are worn out on your loops, use this
kit. The stamped stainless steel plate has the detents
pressed in. It fits over the rivets that were on the loop
originally. The kit also comes with a spring to replace the
rubber bushing. No more guesswork for adjusting the
tension on the assembly. If you have any truck mirrors
without the preset feature, use this kit to give any loop
presets without replacing the entire loop.
RUBBER PRESET HARDWARE KIT
FOR EXISTING PRESET LOOPS
748010
Replacement kit for mirrors with
Velvac rubber preset pivots
and Velvac mirrors with rubber
washer style presets. Uses
5/16”-18 x 1-1/2” stainless steel
bolt. Enough for one complete Velvac preset
pivot end.
MIRROR HEAD MOUNTING CLAMPS
FOR 3/4” OR 1” TUBING
SS-1245
3/4” Clamp
with bolt
SS-1247
3/4” Clamp,
Mounts on
horizontal leg
of loop
612994
SS-1251
3/4” Twist Clamp. Mounts
on vertical leg of loop
Dovetail
Clamp for 1”
loop to mount
spot mirrors
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 163
7/21/2016 3:05:29 PM
REPLACEMENT
164 SPRINTER
AND CROSS VIEW MIRRORS
MIRRORS FOR SPRINTER VANS
Replacement mirror assemblies make it easy
to add the safety of Velvac’s wide angle mirror
system to any Sprinter van.
800-888-5072 • MillSupply.com
BREAK-AWAY
REAR CROSSVIEW SYSTEM
Allows mirror to pivot when struck by an object.
Stainless Steel
Arm and Mirror Head
Break-Away System with mirror head........................... 61-005
Mounting Bracket only with mounting hardware....... MB-647
10” Mirror Head Only, Stainless Steel.......................... 709218
715704 - Side Mirror Assembly (PAIR).
Includes: mirror heads and loop. (Base not
included) (Assemblies mount to existing OE base)
Does not fit 2007 and newer Sprinter vans.
704152 - Replacement 6-1/2” x 10” flat
glass mirror head, black plastic
704153 - Replacement 6-1/2” x 6”
convex mirror head, black plastic
Mirror assy does not
include mount base.
• 6-1/2” x 10” upper flat glass head and 6-1/2” x 6” lower convex provide a great view of passing lanes and blind spot areas around the sides of the vehicle
• Designed to mount directly to the OE mirror mounting
base in minutes
• Cast aluminum mounting ends attach to existing pivot
system allowing mirrors to fold forward and back for
added safety and convenience
• Black powder coated brackets and molded mirror
heads match existing mounting bracket and vehicle
trim
REAR CROSS VIEW MIRRORS
FOR SPRINTER VANS
When used in combination with
Velvac’s wide angle mirror
system (shown above) this
new back-up mirror system
provides the Sprinter
driver with the view
directly behind the vehicle
for added blind spot
coverage. Features a 10”
molded convex mirror for
optimum visibility and adjustment.
715719 - Back-Up Safety Mirror System with 10”
diameter mirror head that fits Sprinter Vans. Stainless
steel tube bracket with aluminum mounting plates and
stainless steel hardware.
708543 - 10” Diameter mirror head only
These safety systems provide the driver with the ability to view
the dangerous blind spot area around the rear bumper of the
vehicle. Being able to view this area before backing-up can help
reduce accidents.
Approximate field of vision when mirror is properly
adjusted. Field of vision should include entire rear
bumper as a reference.
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 164
7/21/2016 3:05:31 PM
REPLACEMENT
REAR VIEW MIRRORS 165
REAR VIEW SYSTEMS FOR STEP VANS
800-888-5072 • MillSupply.com
FIXED POSITION
REAR CROSSVIEW SYSTEMS
A universal mounting bracket
lets this mirror mount to
any flat surface. Kit includes:
10” wide view mirror head,
reinforced 3/4” O.D. tubing
arm, heavy duty mounting
bracket, and stainless steel
hardware.
10” WHITE ASSEMBLY
STUD MOUNT SPOT MIRRORS
712245
Wide Angle
Conversion
kit. Includes
6” x 6.5” stud
mount mirror
head and
3/4” O.D. arm
61-455 - 5” Dia. with
Stud & Clamp on Mtg.,
center mount stud,
fits all tubular brackets,
Black.
61-457 - Same but
Stainless Steel
Complete Assembly.........................712644
White Mirror Head Only................ 709217A
White Bracket Kit Only.....................712642
61-487 - 5-1/2” x 7-1/2”
Rectangular Spot
Mirror with 1/4” Ball
Stud, Bright Aluminum.
10” STAINLESS STEEL
ASSEMBLY
Complete Assembly.........................712643
Stainless Steel Mirror Head Only.....709218
S.S. Bracket Kit Only........................712641
REBOUNDTM TECHNOLOGY
REAR CROSSVIEW SYSTEM
Rosco’s patented
“ReboundTM
Technology” allows
the wrap around
mirror arm, not the
mirror head, to be
hit. “ReboundTM
Technology” springs
the arm back in its
original place when the
vehicle moves away
from the obstruction. Although the mirror
head comes standard with an acrylic
unbreakable 11” convex lens, ReboundTM
auto-return technology allows the mirror
head to always remain properly adjusted
for safe and effective rear cross viewing.
Stainless steel mirror, arm, mount and
hardware.
Side Mount Rebound System ..................... 61-020
Rear Mount ReboundTM System .................... 61-022
TM
708560 - 8-1/2” Dia.
Heated Spot Mirror,
stainless steel, with “L”
bracket, offset stud
708556 - 8-1/2” Dia. Spot
Mirror with “L” bracket,
center mount stud
61-475 - 7-1/2” Dia.
Spot Mirror. stainless
steel with “L” bracket,
with 1/4” offset stud
SS-1245
3/4” Clamp
with bolt
612994
1” Two piece
Dovetail Clamp
with 3/8” hole
723080
Stainless steel
“L” Bracket
STICK-ON SPOT MIRRORS
61-485 - “The
Wedge” Corner
Mount Spot Mirror
3-3/8” Overall size
61-482 - 2” dia.
61-483 - 3” dia.
61-484 - 3-3/4” dia.
61-486
4” x 5-1/2”
718394-5 - Spot Mirror,
2.5” x 3.25” with 7.3” sq.
in. viewing area. Mounts
directly to OE side mirror,
1 pair.
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 165
7/21/2016 3:05:38 PM
REPLACEMENT
166 MIRRORS
800-888-5072 • MillSupply.com
VELVAC 2020 & 2020XG MIRRORS
These mirror assemblies feature the original appearance and unique pivot design which allows the mirror to rotate safely
80o forward or rearward if impacted or when manually pivoting the mirror for tight spaces. This new mirror replaces the
original equipment mirrors and installs in existing mounting pockets using factory mounting holes.
Foldaway mirrors return to preset driving position without readjustment or need for tools.
2020 Assembly
Deluxe Head
2020 Assembly
Standard Head
2020XG Assembly
Deluxe Head
2003 & NEWER FORD E-SERIES CUTAWAY VAN MIRRORS - BLACK
Body Width
Key
M Manual Head Control
H Heated Mirror Head
R Remote Head Control
L Lighted Arm
86”
86”
96”
96”
96”
96”
96”
Head
Standard
Standard
Standard
Standard
Standard/L
Deluxe
Deluxe/L
Top
Bot.
M
H/R
M
H/R
H/R
M
M
H/R H/M
Pair
RH
LH
Pair
RH
LH
715401
715419
715404
715422
715455
715449
715437
715402
715420
715406
715424
715456
715450
715438
715403
715421
715405
715423
715457
715451
715439
715899
716346
715900
716348
715901
716347
1997 & NEWER CHEVY/GMC EXPRESS/SAVANNA MIRRORS - BLACK
2020
Body Width
78”
86”
86”
86”
96”
96”
96”
96”
96”
Head
Deluxe
Standard
Standard
Deluxe
Standard
Standard
Standard/L
Deluxe
Deluxe/L
Top
Bot.
Pair
RH
LH
Pair
M
M 7183895 7183905 7183915
M
714601 714602 714603
H/R
714604 714606 714605
M
M
714591 714592 714593
M
714557 714558 714559
H/R
714563 714564 714565
H/R
714569 714570 714571
M
M
714545 714546 714547
H/R
H/M 714551 714552 714553
Deluxe heads include
adjustable flat and
convex glass.
Mirror Heads - Black
Description
Deluxe RH
RH
715911 715912
716352 716354
VELVAC 2020 REPLACEMENT MIRROR HEADS & GLASS
2020
DELUXE
HEAD
2020XG
Deluxe LH Standard RH Standard LH
LH
715913
716353
2020
STANDARD
HEAD
lack Manual Head*
B
714580 714579 714575
714575
Black H/R Flat - Man. Convex* 714582 714581 714577
714577
Black 2015 Head**
714256
714256
Glass Kits
Manual Flat Glass only
709407
709407
Heated Flat Glass only - H/M
709448 709448 709748
709748
Standard heads feature
one piece flat glass plus
Heated Convex Glass - H/M
709449 709449
a stick-on convex wedge
Convex Repair Kit***
709589 709589
mirror.
Wedge Convex Stick-On
61-485
61-485
* Includes set screw **Includes elbow attachment, 2 screws ***Includes glass, inner housing, clip & actuator
VELVAC 2020XG REPLACEMENT MIRROR HEADS & GLASS
2020XG
HEAD
Mirror heads are
black in color
2020XG Mirrror Heads
Description
Right Head Assy Left Head Assy
Manual - Non-heated
715986
715985
Remote Heated Flat Glass
715990
715989
with Manual Heated Convex Glass
2020XG Convex Glass Only
2020XG Flat Glass Only
Right Glass
Left Glass
Right Glass
Left Glass
716106
716106
716105
716105
716104
716104
716103
716103
Replacement Glass is only available heated but can be used in non-heated mirrors.
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 166
7/21/2016 3:05:54 PM
REPLACEMENT
MIRRORS 167
800-888-5072 • MillSupply.com
VELVAC 2025 MIRRORS
POPULAR ON UTILIMASTER AND U.C.B.C AND FOR TRUCKS & CLASS A RVS
MIRROR SYSTEMS
HEATED & REMOTE CONTROL FLAT GLASS - HEATED MANUAL CONVEX GLASS
713801 - Driver Side - Black, Deluxe Mirror Head with Heated/Remote Glass
713802 - Passenger Side - Black, Deluxe Mirror Head with Heated/Remote Glass
MANUALLY ADJUSTABLE FLAT & CONVEX GLASS
713855 - 2025 Velvac Mirror System, Drivers Side, Black. Manually Adjustable Glass
713856 - 2025 Velvac Mirror System, Passenger Side, Black. Manually Adjustable Glass
MIRROR HEADS AND PARTS
714579 - Left Deluxe Manual Mirror Head with flat glass on top with and
convex glass on bottom, manual adjustment, black.
714580 - Right Deluxe Mirror Head with flat glass on top with and full width
convex glass on bottom, manual adjustment, black.
709448 - Flat Glass Kit for heated and non-heated applications. Used on left
or right.
709449 - Convex Glass Kit for heated and non-heated applications. Used on
left or right.
709589 - Lower convex repair kit for deluxe mirror head. Includes heated
convex glass, inner housing, retaining clip and actuator. Fits left or right.
UNIVERSAL MOUNT
MIRROR KIT
709448
709449
709589
FORD TRANSIT CONNECT MIRROR SYSTEM FROM ROSCO
6651RB
6651LB
712479 - Left and Right Stainless Steel
Universal door mount mirrors. For use on vehicles
with up to 96” wide bodies. Solid elbow & one
piece lower tubing brace for mounting stability.
7.5” x 10.5” Flat glass mirror head.
33910002 - Replacement Stainless Steel
90 degree elbow only.
Designed specifical y for Ford Transit Connect
vehicles. This system offers a generous mirror
viewing area on two separately adjustable mirror
heads and allows drivers to optimize mirror
angles and locations to cover all blind spots
and danger zones. This mirror system offers
more than 50% more viewing surface area than
standard mirrors. The wider field of view and the
exceptional stability allows the mirrors to provide
a clear image of the passing lanes and blind
spots around the vehicle leading to improved
safety and faster driver reaction time.
6651LB - LH Mirror Assembly
6651RB - RH Mirror Assembly
All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers.
Stepvan 2016.indb 167
7/21/2016 3:06:04 PM