docDOUGLAS CHERO
download 
Report Transcription
DOUGLAS CHERO
FORGED VALVES Telephone +34 913 581 212 Fax +34 913 580 488 280 e-mail Web gral@saidi.es www.saidi.es FORGED STEEL VALVES Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 281 FORGED VALVES Douglas Chero was established in 1974 to meet the demand for high quality forged valves in the petroleum refining and production plants, offshore oil and gas fields, power industry, fertilizer, chemical and desalination plants all over the world. Production capacity soured from 3,000 pieces in 1974 to current 40,000 pieces per month in our new factory with modern state-of-the-art machining facilities and manufacturing technology. The factory is 25,000 sq.m. (278,000 sq.ft.) of which 9,000 sq.m. (100,000 sq.ft.) are covered. PRODUCT RANGE Type. Gate, Globe/Stop/Needle, Piston/Ball/Swing Check, Drop & Block check (Urea service). Body joining. Bolted and Welded bonnet (seal or full penetration), Bonnetless and Pressure seal. Execution. Straight, Y pattern & Angle, Bellows seals, Cryogenic service, Vacuum service, OS&Y, ISRS,... Motorized. With Electric, Pneumatic actuators... Sizes. 1/4’’ to 2’’ reduced and full bore (urea service up to 8”) End connections. SW, Threaded, BW, Hub and Flanged (integral type) Rating. ANSI class150 to 4500 MATERIALS Carbon Steel - ASTM A105 Killed Carbon Steel - ASTM A350 LF2 Alloy Steel - ASTM A182 - F5, F9, F11, F22, F91 Stainless Steel - ASTM A182/F304(L), F316(L), F317, F321, F347, F44 Special Alloy - Monel, Inconel, Incoloy, Hastelloy, UNS, Alloy 20, Sanicro 28, Titanium, … Duplex - ASTM A182 F51, F53, F55 QUALITY • Material Test Report • NDE, Mechanical and Chemical Analysis • Hydro Test • Air Test • Performance Test • Cryogenic Test • Special Tests available on request Telephone +34 913 581 212 Fax +34 913 580 488 282 e-mail Web gral@saidi.es www.saidi.es FORGED STEEL VALVES Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 283 FORGED VALVES - MATERIAL LIST OF CONSTRUCTION VALVE PARTS MATERIALS GATE GLOBE PISTON / BALL SWING GATE GLOBE (CRYOGENIC) GATE GLOBE (BELLOWS) GATE GLOBE (ISRS) Carbon Steel Killed Carbon Steel Alloy Steel Stainless Duplex Steel Nickel Steel Body Bonnet Body Cover Extension Body Bonnet Body Bonnet Body Bonnet A105N A350 LF2 A182 F1 A182 F5 A182 F9 A182 F11 A182 F22 F44 F51 F53 F55 A182 F304 A182 F304L A182 F316 A182 F316L A182 F321 A182 F347 Monel 400 Inconel 600 Inconel 625 Incoloy 800H Incoloy 825 Hastelloy C276 Hastelloy B2 Disc/Ball Seat Stem Wedge/Disc Seat(s) Disc nut Stem Wedge/Disc Seat(s) A182 F6 A182 F304 F182 F316 A182 F6 A182 F304 A182 F316 F44 F51 F53 F55 A182 F6 A182 F304 A182 F316 F44 F51 F53 F55 A182 F304 A182 F316 A182 F321 A182 F347 Monel 400 Inconel 600 Inconel 625 Incoloy 800H Incoloy 825 Hastelloy C276 Hastelloy B2 Gland Packing Gland Packing Gland Packing AISI 416/303/316 AISI 416/303/316 AISI 416/303/316 AISI 303/316 AISI 303/316 Yoke nut Yoke nut Yoke nut AISI 416 AISI 416 AISI 416 AISI 416 AISI 416 Gland Flange Gland Flange Gland Flange A105N A105N A182 F304 A182 F304 A182 F304 Handwheel Hand. nut Handwheel Hand. nut Handwheel Hand. nut Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel AISI 316/ Graphite AISI 316/ Graphite AISI 316/ Graphite AISI 316/ Graphite AISI 316/ Graphite Graphite Graphite Graphite Graphite Stem Wedge/Disc Seat(s) Disc nut Extension Packing nut Stem Wedge/Disc Seat(s) Disc nut Packing ring Handwheel Hand. nut Spring Gasket Gasket Packing Body studs Body nuts Body studs Body nuts Gland studs Gland nuts Gasket Gasket Packing Packing Body studs Body nuts Body studs Body nuts A193 B7 A194 2H A193 B8 A194 Gr. 8 A193 B16 A194 Gr. 4 A193 B8 A194 Gr. 8 A193 B8 A194 Gr. 8 Gland studs Gland nuts Gland studs Gland nuts AISI 410 A194 2H A193 B8 A194 Gr. 8 AISI 410 A194 Gr. 4 A193 B8 A194 Gr. 8 A193 B8 A194 Gr. 8 AISI 316L Hastelloy C276 AISI 316L Hastelloy C276 AISI 316L Hastelloy C276 AISI 316L Hastelloy C276 AISI 316L Hastelloy C276 A182 F6/ A182 F316 A182 F6/ A182 F316 A182 F6/ A182 F316 A182 F6/ A182 F316 A182 F6/ A182 F316 Aluminium Aluminium Aluminium Aluminium Aluminium Packing Bellow Swing hinge Identif. plate Identif. plate Identif. plate Identif. plate Identif. plate Telephone +34 913 581 212 Fax +34 913 580 488 284 e-mail Web gral@saidi.es www.saidi.es FORGED VALVES - FACE TO FACE DIMENSIONS AS PER ASME B16.10 CLASS 150 1/2” RF 3/4” RTJ RF 1” RTJ RF 1.1/2” RTJ RF 2” RTJ RF RTJ Gate 107.9 119.1 117.5 130.2 127 139.7 165.1 177.8 177.8 190.5 Globe/Piston/Ball Check Swing Check 107.9 119.1 117.5 130.2 127 139.7 165.1 177.8 203.2 215.9 CLASS 300 1/2” RF Gate Globe/Piston/Ball Check Swing Check 3/4” RTJ RF 1” RTJ RF 1.1/2” RTJ RF 2” RTJ RF RTJ 139.7 150.8 152.4 165.1 165.1 177.8 190.5 203.2 215.9 231.8 152.4 163.5 177.8 190.5 203.2 215.9 228.6 241.3 266.7 282.6 152.4 163.5 177.8 190.5 215.9 228.6 241.3 254 266.7 282.6 CLASS 600 1/2” RF Gate-Globe-Piston/Ball Check Swing Check 3/4” RTJ 165.1 163.5 RF 1” RTJ 190.5 RF 190.5 1.1/2” RTJ 215.9 RF 215.9 2” RTJ 241.3 241.3 RF RTJ 292.1 295.3 CLASS 1500 1/2” RF Gate-Globe-Piston/Ball Check Swing Check 3/4” RTJ 215.9 215.9 RF 1” RTJ 228.6 RF 228.6 1.1/2” RTJ 254 RF 254 2” RTJ 304.8 304.8 RF RTJ 368.3 371.5 CLASS 2500 1/2” RF Gate-Globe-Piston/Ball Check Swing Check 3/4” RTJ 263.5 RF 263.5 273 1” RTJ RF 273 1.1/2” RTJ 308 RF 308 384.2 2” RTJ 387.3 RF 450.8 RTJ 454 CONNECTIONS SW Socket Weld BX Butt Weld Sch.XXS ST Small tongue SNB SW/Ext.BW80 SNW SW/Ext.Weld TH NPT Threaded RF Raised face Flanges LF Large female TNS NPT/Ext.SW TNW NPT/Ext.Weld TS SW x NPT FF Flat face Flanges LG Large groove TNT NPT/Ext.NPT SE SW(e) x NPT RJ Ring joint LM Large male TNB NPT/Ext.BW80 B4 Butt Weld Sch.40 SF Small Female LT Large tongue BNS BW80/Ext.SW B6 Butt Weld Sch.160 SG Small groove SNS SW/Ext.SW BNT BW80/Ext.NPT B8 Butt Weld Sch.80 SM Small male SNT SW/Ext.NPT BNB BW80/Ext.BW80 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 285 GATEVALVES GATE VALVE 800 SW/NPT/BW BOLTED BONNET Vl DOUGLAS CHERO GATE VALVE Series R25x Class: 800 GATE VALVE CARBON STEEL CLASS 800 SW/NPT/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction API 602, ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Standards Ha Refer to Material list of construction 1 Pf SERIES R25x - GATE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) 010102304041310 1/4” 80 143 90 8.5 1.8 010102304041309 3/8” 80 145 90 10 1.8 010102304040435 1/2” 80 145 90 10 1.7 010102304040436 3/4” 90 156 90 14 2.1 010102304040439 1” 110 186 100 18 3.3 010102304040466 1.1/4” 127 216 120 24 5.2 010102304040460 1.1/2” 127 255 140 31 7.0 010102304040459 2” 130 273 140 36.5 9.1 SERIES R25x - GATE VALVE A105/F6 U TRIM No. 5 - CLASS 800 SW Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) 010102304041328 1/4” 80 143 90 8.5 1.8 - 3/8” 80 145 90 10 1.8 010102304040640 1/2” 80 145 90 10 1.7 010102304040651 3/4” 90 156 90 14 2.1 010102304040652 1” 110 186 100 18 3.3 010102304041326 1.1/4” 127 216 120 24 5.2 010102304040653 1.1/2” 127 255 140 31 7.0 010102304040654 2” 130 273 140 36.5 9.1 SERIES R25x - GATE VALVE A105/F316 TRIM No. 10 - CLASS 800 SW Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/4” 80 143 90 8.5 1.8 - 3/8” 80 145 90 10 1.8 010102304040665 1/2” 80 145 90 10 1.7 010102304040662 3/4” 90 156 90 14 2.1 010102304040655 1” 110 186 100 18 3.3 - 1.1/4” 127 216 120 24 5.2 010102304040564 1.1/2” 127 255 140 31 7.0 010102304042954 2” 130 273 140 36.5 9.1 Telephone +34 913 581 212 Fax +34 913 580 488 286 e-mail Web gral@saidi.es www.saidi.es Ff ANSI SERIES R25x - GATE VALVE A105/F6 TRIM No. 1 - CLASS 800 NPT Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) 010102304041146 1/4” 80 143 90 8.5 1.8 010102304041145 3/8” 80 145 90 10 1.8 010102304040570 1/2” 80 145 90 10 1.7 010102304040581 3/4” 90 156 90 14 2.1 010102304040574 1” 110 186 100 18 3.3 010102304040575 1.1/4” 127 216 120 24 5.2 010102304040548 1.1/2” 127 255 140 31 7.0 010102304040549 2” 130 273 140 36.5 9.1 SERIES R25x - GATE VALVE A105/F6 U TRIM No. 5 - CLASS 800 NPT Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/4” 80 143 90 8.5 1.8 - 3/8” 80 145 90 10 1.8 - 1/2” 80 145 90 10 1.7 010102304040555 3/4” 90 156 90 14 2.1 010102304040618 1” 110 186 100 18 3.3 - 1.1/4” 127 216 120 24 5.2 010102304040590 1.1/2” 127 255 140 31 7.0 010102304040595 2” 130 273 140 36.5 9.1 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 287 GATEVALVES GATE VALVE 800 SW/NPT/BW WELDED BONNET DOUGLAS CHERO GATE VALVE Series R25xWB Vl Class: 800 CARBON STEEL GATE VALVE CLASS 800 SW/NPT/BW WELDED BONNET Available also fillet Specifications Material Pressure Rating Tests Carbon Steel ASTM A105 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction API 602, ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 1 Standards 1 Ha Refer to Material list of construction Pf Ff SERIES R25xWB - GATE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 150 90 10 1.4 - 3/4” 90 157 90 14 1.7 - 1” 110 188 100 18 2.8 - 1.1/4” 127 220 120 24 4.4 - 1.1/2” 127 248 140 31 5.6 - 2” 130 274 140 36.5 7.6 SERIES R25xWB - GATE VALVE A105/F6 U TRIM No. 5 - CLASS 800 SW W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 150 90 10 1.4 - 3/4” 90 157 90 14 1.7 010102304040656 1” 110 188 100 18 2.8 - 1.1/4” 127 220 120 24 4.4 - 1.1/2” 127 248 140 31 5.6 - 2” 130 274 140 36.5 7.6 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 288 e-mail Web gral@saidi.es www.saidi.es ANSI GATE VALVE CLASS 150 RF BOLTED BONNET Vl DOUGLAS CHERO GATE VALVE Series R35x/15 Class: 150 CARBON STEEL GATE VALVE CLASS 150 RF Specifications Material Pressure Rating Tests Ha Carbon Steel ASTM A1051 150 p.s.i. at 550ºF | 285 p.s.i. at 100ºF Hydraulic (minimum): Body 450 p.s.i. Seat 325 p.s.i. Air under water: Seat 85 p.s.i. Construction API 602, ISO 15761 Flanges as per ASME B16.5, ASME B16.10 Standards Refer to Material list of construction 1 Pf Ff SERIES R35x/15 - GATE VALVE A105/F6 TRIM No. 1 - CLASS 150 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) 010102304041475 1/2” 107.9 179 90 10 3.2 010102304041474 3/4” 117.5 186 90 14 4.1 1” 127.0 208 100 18 5.8 010102304041473 - 1.1/4” 010102304041462 1.1/2” 165.1 255 140 31 10 010102304041461 2” 177.8 273 140 36.5 13.1 SERIES R35x/15 - GATE VALVE A105/F6 U TRIM No. 5 - CLASS 150 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 107.9 179 90 10 3.2 - 3/4” 117.5 186 90 14 4.1 127.0 208 100 18 5.8 - 1” - 1.1/4” - 1.1/2” 165.1 255 140 31 10 - 2” 177.8 273 140 36.5 13.1 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 289 GATEVALVES GATE VALVE CLASS 300 RF BOLTED BONNET Vl DOUGLAS CHERO GATE VALVE Series R35x/30 Class: 300 CARBON STEEL GATE VALVE CLASS 300 RF Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 300 p.s.i. at 850ºF | 740 p.s.i. at 100ºF Hydraulic (minimum): Body 1125 p.s.i. Seat 825 p.s.i. Air under water: Seat 85 p.s.i. Construction API 602, ISO 15761 Flanges as per ASME B16.5, ASME B16.10 Standards 1 Ha Refer to Material list of construction Pf Ff SERIES R35x/30 - GATE VALVE A105/F6 TRIM No. 1 - CLASS 300 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 139.7 145 90 10 3.8 - 3/4” 152.4 156 90 14 5.4 165.1 186 100 18 6.5 - 1” - 1.1/4” 010102304041671 1.1/2” 190.5 255 140 31 13.1 2” 215.9 273 140 36.5 17.3 - SERIES R35x/30 - GATE VALVE A105/F6 U TRIM No. 5 - CLASS 300 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 139.7 145 90 10 3.8 - 3/4” 152.4 156 90 14 5.4 165.1 186 100 18 6.5 - 1” - 1.1/4” - 1.1/2” 190.5 255 140 31 13.1 - 2” 215.9 273 140 36.5 17.3 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 290 e-mail Web gral@saidi.es www.saidi.es ANSI GATE VALVE CLASS 600 RF BOLTED BONNET Vl DOUGLAS CHERO GATE VALVE Series R35x/60 Class: 600 CARBON STEEL GATE VALVE CLASS 600 RF Specifications Material Pressure Rating Tests Ha Carbon steel ASTM A1051 600 p.s.i. at 850ºF | 1480 p.s.i. at 100ºF Hydraulic (minimum): Body 2225 p.s.i. Seat 1650 p.s.i. Air under water: Seat 85 p.s.i. Construction API 602, ISO 15761 Flanges as per ASME B16.5, ASME B16.10 Standards Refer to Material list of construction 1 Pf Ff SERIES R35x/60 - GATE VALVE A105/F6 TRIM No. 1 - CLASS 600 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 165.1 145 90 10 3.5 - 3/4” 190.5 156 90 14 5.8 215.9 186 100 18 7.4 - 1” - 1.1/4” - 1.1/2” 241.3 255 140 31 14.3 - 2” 292.1 273 140 36.5 18.8 SERIES R35x/60 - GATE VALVE A105/F6 U TRIM No. 5 - CLASS 600 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 165.1 145 90 10 3.5 - 3/4” 190.5 156 90 14 5.8 215.9 186 100 18 7.4 - 1” - 1.1/4” - 1.1/2” 241.3 255 140 31 14.3 - 2” 292.1 273 140 36.5 18.8 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 291 GATEVALVES GATE VALVE CLASS 1500 SW/NPT/BW BOLTED BONNET Vl DOUGLAS CHERO GATE VALVE Series X65x Class: 1500 CARBON STEEL GATE VALVE CLASS 1500 SW/NPT/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5575 p.s.i. Seat 4100 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Standards Ha Refer to Material list of construction X - Gasket=Spiral Wound. RJ gasket available on request 1 . x Pf Ff SERIES X65x - GATE VALVE A105/F6 TRIM No. 1 - CLASS 1500 SW Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 212 120 11.5 5.9 - 3/4” 115 256 175 15 8.4 130 272 175 19.5 9.8 - 1” - 1.1/4” - 1.1/2” 210 411 260 32 26.8 - 2” 240 422 260 40 35.4 SERIES X65x - GATE VALVE A105/F6 U TRIM No. 5 - CLASS 1500 SW Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 212 120 11.5 5.9 - 3/4” 115 256 175 15 8.4 1” 130 272 175 19.5 9.8 010102304041275 - 1.1/4” - 1.1/2” 210 411 260 32 26.8 2” 240 422 260 40 35.4 010102304041267 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 292 e-mail Web gral@saidi.es www.saidi.es ANSI GATE VALVE CLASS 1500 SW/NPT/BW WELDED BONNET Vl DOUGLAS CHERO GATE VALVE Series X65xWB Class: 1500 CARBON STEEL GATE VALVE CLASS 1500 SW/NPT/BW WELDED BONNET Specifications Available also fillet Ha Material Pressure Rating Tests Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5575 p.s.i. Seat 4100 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaed ASME B1.20.1 Butt Weld ASME B16.25 Standards Refer to Material list of construction X - Gasket=Spiral Wound. RJ gasket available on request 1 Pf Ff SERIES X65xWB - GATE VALVE A105/F6 TRIM No. 1 - CLASS 1500 SW W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 90 175 120 11.5 2.0 - 3/4” 110 217 175 15 3.2 127 234 175 19.5 4.9 - 1” - 1.1/4” - 1.1/2” 130 295 200 32 8.5 - 2” 150 375 260 40 15 SERIES X65xWB - GATE VALVE A105/F6 U TRIM No. 5 - CLASS 1500 SW W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) 010102304040568 1/2” 90 175 120 11.5 2.0 010102304040567 3/4” 110 217 175 15 3.2 1” 127 234 175 19.5 4.9 010102304040566 - 1.1/4” 010102304040569 1.1/2” 130 295 200 32 8.5 010102304040552 2” 150 375 260 40 15 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 293 GATEVALVES GATE VALVE CLASS 1500 RF BOLTED BONNET Vl DOUGLAS CHERO GATE VALVE Series 65x/150 Class: 1500 CARBON STEEL GATE VALVE CLASS 1500 RF Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5575 p.s.i. Seat 4100 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Flanges as per ASME B16.5, ASME B16.10 Standards Ha Refer to Material list of construction X - Gasket=Spiral Wound. RJ gasket available on request 1 . x Pf Ff SERIES 65x/150 - GATE VALVE A105/F6 TRIM No. 1 - CLASS 1500 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 215.9 212 120 11.5 9.7 - 3/4” 228.6 256 175 15 15.5 254.0 272 175 19.5 17.5 - 1” - 1.1/4” - 1.1/2” 304.8 411 260 32 38.5 - 2” 368.3 422 260 40 56.0 SERIES 65x/150 - GATE VALVE A105/F6 U TRIM No. 5 - CLASS 1500 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 215.9 212 120 11.5 9.7 - 3/4” 228.6 256 175 15 15.5 254.0 272 175 19.5 17.5 - 1” - 1.1/4” - 1.1/2” 304.8 411 260 32 38.5 - 2” 368.3 422 260 40 56.0 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 294 e-mail Web gral@saidi.es www.saidi.es ANSI GATE VALVE CLASS 2500 SW/NPT/BW BOLTED BONNET Vl DOUGLAS CHERO GATE VALVE Series 105x Class: 2500 CARBON STEEL GATE VALVE CLASS 2500 SW/NPT/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9275 p.s.i. Seat 6800 p.s.i. Air under water: Seat 85 p.s.i. Construction ASME B16.34 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Standards Ha 1 Refer to Material list of construction Pf Ff SERIES 105x - GATE VALVE A105/F6 TRIM No. 1 - CLASS 2500 SW Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 212 140 10 6.1 - 3/4” 115 256 200 14 8.7 130 272 200 18 10.2 - 1” - 1.1/4” - 1.1/2” 210 411 260 31 27.4 - 2” 240 422 350 36.5 36.2 SERIES 105x - GATE VALVE A105/F6 U TRIM No. 5 - CLASS 2500 SW Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 212 140 10 6.1 - 3/4” 115 256 200 14 8.7 130 272 200 18 10.2 - 1” - 1.1/4” - 1.1/2” 210 411 260 31 27.4 - 2” 240 422 350 36.5 36.2 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 295 GATEVALVES GATE VALVE CLASS 2500 SW/NPT/BW WELDED BONNET Vl DOUGLAS CHERO GATE VALVE Series 105xWB Class: 2500 CARBON STEEL GATE VALVE CLASS 2500 SW/NPT/BW WELDED BONNET Available also fillet Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9275 p.s.i. Seat 6800 p.s.i. Air under water: Seat 85 p.s.i. Construction ASME B16.34 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Standards 1 Ha Refer to Material list of construction Pf Ff SERIES 105xWB - GATE VALVE A105/F6 TRIM No. 1 - CLASS 2500 SW W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 198 140 10 2.6 - 3/4” 127 225 200 14 4.0 127 243 200 18 5.9 - 1” - 1.1/4” - 1.1/2” 150 387 260 31 10.0 - 2” 240 403 350 36.5 29 SERIES 105xWB - GATE VALVE A105/F6 U TRIM No. 5 - CLASS 2500 SW W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 198 140 10 2.6 - 3/4” 127 225 200 14 4.0 127 243 200 18 5.9 - 1” - 1.1/4” - 1.1/2” 150 387 260 31 10.0 - 2” 240 403 350 36.5 29 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 296 e-mail Web gral@saidi.es www.saidi.es ANSI GATE VALVE CLASS 2500 RF BOLTED BONNET Vl DOUGLAS CHERO GATE VALVE Series 115x/250 Class: 2500 CARBON STEEL GATE VALVE CLASS 2500 RF Specifications Material Pressure Raging Tests Ha Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9275 p.s.i. Seat 6800 p.s.i. Air under water: Seat 85 p.s.i. Construction ASME B16.34 Flanged ASME B16.5, ASME B16.10 Standards Refer to Material list of construction 1 Pf Ff SERIES 115x/250 - GATE VALVE A105/F6 TRIM No. 1 - CLASS 2500 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 263.5 212 140 10 9.9 - 3/4” 273.0 256 200 14 15.8 308.0 272 200 18 17.9 - 1” - 1.1/4” - 1.1/2” 384.2 411 260 31 39.1 - 2” 450.8 422 350 36.5 56.8 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 297 GATEVALVES GATE VALVE CLASS 4500 SW/NPT/BW WELDED BONNET Vl DOUGLAS CHERO GATE VALVE Series 205xWB Class: 4500 CARBON STEEL GATE VALVE CLASS 4500 SW/NPT/BW WELDED BONNET Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 4010 p.s.i. at 850ºF | 11110 p.s.i. at 100ºF Hydraulic (minimum): Body 16650 p.s.i. Seat 12210 p.s.i. Air under water: Seat 85 p.s.i. Construction ASME B16.34 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Standards Ha Refer to Material list of construction 1 Pf Ff SERIES 205xWB - GATE VALVE A105/F6 TRIM No. 1 - CLASS 4500 SW W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 127 234 175 8 4.1 - 3/4” 127 259 200 11 6.2 130 323 260 15 11.8 - 1” - 1.1/4” - 1.1/2” 240 431 350 25 28.0 - 2” 240 486 350 30 42.0 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 298 e-mail Web gral@saidi.es www.saidi.es ANSI GATE VALVE 800 SW/NPT CRYOGENIC BOLTED BONNET Vl DOUGLAS CHERO GATE VALVE Series CR35xB Class: 800 CARBON STEEL GATE VALVE CLASS 800 SW/NPT CRYOGENIC BOLTED BONNET Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction API 602, ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Standards 1 Refer to Material list of construction Ha Pf Ff SERIES CR35xB - GATE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW CRYOGENIC B.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 333 90 10 3.1 - 3/4” 90 367 90 14 3.6 - 1” 110 406 100 18 5.7 - 1.1/4” 127 463 120 24 8.8 - 1.1/2” 127 508 140 31 11.7 - 2” 130 534 140 36.5 14.4 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 299 GATEVALVES GATE VALVE CLASS 800 SW/NPT CRYOGENIC WELDED BONNET Vl DOUGLAS CHERO GATE VALVE Series CR25x Class: 800 CARBON STEEL GATE VALVE CLASS 800 SW/NPT CRYOGENIC WELDED BONNET Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction API 602, ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Standards Refer to Material list of construction 1 Ha Pf Ff SERIES CR25x - GATE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW CRYOGENIC W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 333 90 10 3.1 - 3/4” 90 367 90 14 3.6 - 1” 110 406 100 18 5.7 - 1.1/4” 127 463 120 24 8.8 - 1.1/2” 127 508 140 31 11.7 - 2” 130 534 140 36.5 14.4 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 300 e-mail Web gral@saidi.es www.saidi.es ANSI GATE VALVE CLASS 800 SW/NPT BELLOWS SEALED BOLTED BONNET Vl DOUGLAS CHERO GATE VALVE Series SR25xB Class: 800 CARBON STEEL GATE VALVE CLASS 800 SW/NPT BELLOWS SEALED BOLTED BONNET Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1444 p.s.i. at 100ºF Hydaulic (minimum): Body 2180 p.s.i. Seat 1495 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Standards 1 Refer to Material list of construction Ha Pf Ff SERIES SR25xB - GATE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW BELLOWS SEALED B.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 333 90 10 3.1 - 3/4” 90 367 90 14 3.6 - 1” 110 406 100 18 5.7 - 1.1/4” 127 463 120 24 8.8 - 1.1/2” 127 508 140 31 11.7 - 2” 130 534 140 36.5 14.4 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 301 GATEVALVES GATE VALVE CLASS 800 SW/NPT BELLOWS SEALED WELDED BONNET Vl DOUGLAS CHERO GATE VALVE Series SR25x Class: 800 CARBON STEEL GATE VALVE CLASS 800 SW/NPT BELLOWS SEALED WELDED BONNET Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1444 p.s.i. at 100ºF Hydraulic (minimum): Body 2180 p.s.i. Seat 1495 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Standards Refer to Material list of construction 1 Ha Pf Ff SERIES SR25x - GATE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW BELLOWS SEALED W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 256 90 10 2.7 - 3/4” 90 267 90 14 3.1 - 1” 110 300 100 18 4.7 - 1.1/4” 127 344 120 24 6.9 - 1.1/2” 127 421 140 31 9.5 - 2” 130 433 140 36.5 12.6 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 302 e-mail Web gral@saidi.es www.saidi.es ANSI GATE VALVE 800 SW/NPT ISRS WELDED BONNET Vl DOUGLAS CHERO GATE VALVE Series IR25xWF Class: 800 CARBON STEEL GATE VALVE CLASS 800 SW/NPT ISRS2 WELDED BONNET Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction API 602, ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Standards 1 Refer to Material list of construction 2 ISRS = Inside screw, Rising stem Ha Pf Ff SERIES SR25xWF - GATE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW ISRS W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 158 90 10 1.5 - 3/4” 90 183 90 14 1.9 - 1” 110 201 100 18 3.2 - 1.1/4” 127 255 120 24 4.9 - 1.1/2” 127 276 140 31 6.2 - 2” 130 310 140 36.5 8.4 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 303 GATEVALVES GATE VALVE CLASS 800 SW/NPT/BW EXT. BODY BOLTED BONNET Vl DOUGLAS CHERO GATE VALVE Series R25x/N Class: 800 CARBON STEEL GATE VALVE CLASS 800 SW/NPT/BW EXTENDED BODY B.B. Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction API 602, API 606 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Standards Ha Refer to Material list of construction 1 Pf Ff SERIES R25x/N - GATE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW EXTENDED BODY B.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 145 145 90 10 1.9 - 3/4” 160 156 90 14 2.4 - 1” 190 186 100 18 3.8 - 1.1/4” - 1.1/2” 224 255 140 31 7.7 - 2” 240 273 140 36.5 7.7 SERIES R25x/N - GATE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW EXTENDED BODY B.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) 1/2” 145 145 90 10 1.9 - 3/4” 160 156 90 14 2.4 - 1” 190 186 100 18 3.8 - 1.1/4” - 1.1/2” 224 255 140 31 7.7 - 2” 240 273 140 36.5 7.7 Telephone +34 913 581 212 Fax +34 913 580 488 304 Weight (kg) - e-mail Web gral@saidi.es www.saidi.es ANSI GATE VALVE CLASS 800 SW/NPT/BW EXT. BODY W.B. Vl DOUGLAS CHERO GATE VALVE Series R25xWB/N Class: 800 CARBON STEEL GATE VALVE CLASS 800 SW/NPT/BW EXTENDED BODY W.B. Specifications Material Pressure Rating Tests Carbon Steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction API 602, API 606 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Standards Ha 1 Refer to Material list of construction Pf Ff SERIES R25xWB/N - GATE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW EXT. BODY W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 145 150 90 10 1.6 010102304040589 3/4” 160 157 90 14 2.0 190 188 100 18 3.2 - 1” - 1.1/4” - 1.1/2” 224 248 140 31 6.2 - 2” 240 273 140 36.5 8.3 SERIES R25xWB/N - GATE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW EXT. BODY W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 145 150 90 10 1.6 - 3/4” 160 157 90 14 2.0 1” 190 188 100 18 3.2 010102304041567 - 1.1/4” - 1.1/2” 224 248 140 31 6.2 - 2” 240 273 140 36.5 8.3 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 305 GATEVALVES GATE VALVE CLASS 800 SW/NPT-WELD “EXTENDED WELD” B.B. Vl DOUGLAS CHERO GATE VALVE Series R25x/NW Class: 800 CARBON STEEL GATE VALVE CLASS 800 SW/NPT-WELD “EXTENDED WELD” B.B. Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction API 602, API 606 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Standards Ha Refer to Material list of construction 1 Pf Iw Ff SERIES R25x/NW - GATE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW “EXTENDED WELD” B.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Iw (mm) 1/2” 208 208 90 10 22 2.5 - 3/4” 218 156 90 14 30 2.8 244 186 100 18 36 5.0 - 1” - 1.1/4” - 1.1/2” 263 255 140 31 50 9.8 - 2” 268 273 140 36.5 65 13.5 Telephone +34 913 581 212 Fax +34 913 580 488 306 Weight (kg) - e-mail Web gral@saidi.es www.saidi.es ANSI GATE VALVE CLASS 800 SW/NPT-WELD “EXTENDED WELD” W.B. Vl DOUGLAS CHERO GATE VALVE R25xWB/NW Class: 800 CARBON STEEL GATE VALVE CLASS 800 SW/NPT-WELD “EXTENDED WELD” W.B. Specifications Material Pressure Rating Tests Ha Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction API 602, API 606 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Standards 1 Refer to Material list of construction Pf Iw Ff SERIES R25xWB/NW - GATE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW “EXTENDED WELDED” W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Iw (mm) Weight (kg) - 1/2” 208 150 90 10 22 2.2 - 3/4” 218 157 90 14 30 2.5 244 188 100 18 36 4.7 - 1” - 1.1/4” - 1.1/2” 263 248 140 31 50 9.0 - 2” 268 274 140 36.5 65 12.7 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 307 GATEVALVES GATE VALVE CLASS 800 SW/NPT LANTERN RING WELDED BONNET Vl DOUGLAS CHERO GATE VALVE Series LR25xWB Class: 800 CARBON STEEL GATE VALVE CLASS 800 SW/NPT LANTERN RING W.B. Specifications Material Pressure Rating Tests Available also fillet Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction API 602, ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Standards Ha Refer to Material list of construction 1 Pf Ff SERIES LR25xWB - GATE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW LANTERN RING W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 164 90 10 1.6 - 3/4” 90 171 90 14 1.9 - 1” 110 204 100 18 3.1 - 1.1/4” 127 240 120 24 4.2 - 1.1/2” 127 268 140 31 6.1 - 2” 130 296 140 36.5 8.2 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web æ Full Bore Design and special designs, on request 308 gral@saidi.es www.saidi.es ANSI GLOBEVALVES Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 309 GLOBEVALVES GLOBE VALVE CLASS 800 SW/NPT/BW BOLTED BONNET DOUGLAS CHERO GLOBE VALVE Series R35x Vl Class: 800 CARBON STEEL GLOBE VALVE CLASS 800 SW/NPT/BW Specifications Material Pressure Rating Tests Carbon Steel as per ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Design according to ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Standards Ha Refer to materials list 1 Pf Ff SERIES R35x - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) 010102304040650 1/2” 80 152 90 9 010102304040631 3/4” 90 159 90 12.5 1.7 2 010102304040620 1” 110 182 100 17.5 3.2 5.3 010102304040629 1.1/4” 127 214 120 22.5 010102304040639 1.1/2” 155 283 140 281 7.8 010102304040627 2” 170 306 140 322 10.6 SERIES R35x - GLOBE VALVE A105/F6 U TRIM No. 5 - CLASS 800 SW Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) 010102304040625 1/2” 80 152 90 9 010102304040624 3/4” 90 159 90 12.5 1.7 2 010102304040623 1” 110 182 100 17.5 3.2 5.3 010102304040468 1.1/4” 127 214 120 22.5 010102304040454 1.1/2” 155 283 140 281 7.8 010102304040626 2” 170 306 140 322 10.6 SERIES R35x - GLOBE VALVE A105/F316 TRIM No. 10 - CLASS 800 SW Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) 010102304040622 1/2” 80 152 90 9 010102304040464 3/4” 90 159 90 12.5 1.7 2 010102304040455 1” 110 182 100 17.5 3.2 5.3 - 1.1/4” 127 214 120 22.5 010102304040456 1.1/2” 155 283 140 281 7.8 2” 170 306 140 322 10.6 - Telephone +34 913 581 212 Fax +34 913 580 488 310 e-mail Web gral@saidi.es www.saidi.es ANSI SERIES R35x - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 800 NPT Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) 010102304040465 1/2” 80 152 90 9 010102304040482 3/4” 90 159 90 12.5 1.7 2 010102304040467 1” 110 182 100 17.5 3.2 5.3 010102304040453 1.1/4” 127 214 120 22.5 010102304040469 1.1/2” 155 283 140 281 7.8 010102304040470 2” 170 306 140 322 10.6 SERIES R35x - GLOBE VALVE A105/F6 U TRIM No. 5 - CLASS 800 NPT Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) 010102304040475 1/2” 80 152 90 9 010102304040471 3/4” 90 159 90 12.5 1.7 2 010102304040472 1” 110 182 100 17.5 3.2 5.3 - 1.1/4” 127 214 120 22.5 - 1.1/2” 155 283 140 281 7.8 - 2” 170 306 140 322 10.6 æ Full Bore Design and special executions, on request 1 Pf = 29.5 with integral stellited seat 2 Pf = 35.0 with integral stellited seat Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 311 GLOBEVALVES GLOBE VALVE CLASS 800 SW/NPT/BW WELDED BONNET DOUGLAS CHERO GLOBE VALVE Series R35xWB Vl Class: 800 CARBON STEEL GLOBE VALVE CLASS 800 SW/NPT/BW WELDED BONNET Available also fillet Specifications Material Pressure Rating Tests Carbon steel ASTM A105 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 1 Standards 1 Ha Refer to Material list of construction Pf Ff SERIES R35xWB - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 153 90 9 1.4 - 3/4” 90 158 90 12.5 1.6 - 1” 110 179 100 17.5 3.0 - 1.1/4” 127 220 120 22.5 4.8 - 1.1/2” 155 250 140 281 6.8 - 2” 170 274 140 322 9.4 SERIES R35xWB - GLOBE VALVE A105/F6 U TRIM NO. 5 - CLASS 800 SW W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 153 90 9 1.4 - 3/4” 90 158 90 12.5 1.6 - 1” 110 179 100 17.5 3.0 - 1.1/4” 127 220 120 22.5 4.8 - 1.1/2” 155 250 140 281 6.8 - 2” 170 274 140 322 9.4 æ Full Bore Design and special executions, on request 1 Pf = 29.5 with integral stellited seat 2 Pf = 35.0 with integral stellited seat Telephone +34 913 581 212 Fax +34 913 580 488 312 e-mail Web gral@saidi.es www.saidi.es ANSI GLOBE VALVE CLASS 150 RF BOLTED BONNET Vl DOUGLAS CHERO GLOBE VALVE Series R35x/15 Class: 150 CARBON STEEL GLOBE VALVE CLASS 150 RF Specifications Material Pressure Rating Tests Ha Carbon steel ASTM A1051 150 p.s.i. at 550ºF | 285 p.s.i. at 100ºF Hydraulic (minimum): Body 450 p.s.i. Seat 325 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Flanges as per ASME B16.5, ASME B16.10 Standards Refer to Material list of construction 1 Pf Ff SERIES R35x/15 - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 150 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) 010102304042908 1/2” 107.9 186 90 9 3.1 - 3/4” 177.5 189 90 12.5 4.0 127.0 203 100 17.5 5.7 - 1” - 1.1/4” 010102304042851 1.1/2” 165.1 283 140 281 10.6 2” 203.2 314 140 322 15.4 - SERIES R35x/15 - GLOBE VALVE A105/F6 U TRIM No. 5 - CLASS 150 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 107.9 186 90 9 3.1 010102304040441 3/4” 177.5 189 90 12.5 4.0 1” 127.0 203 100 17.5 5.7 010102304040479 - 1.1/4” - 1.1/2” 165.1 283 140 281 10.6 - 2” 203.2 314 140 322 15.4 æ Full Bore Design and special executions, on request 1 Pf = 29.5 with integral stellited seat 2 Pf = 35.0 with integral stellited seat Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 313 GLOBEVALVES GLOBE VALVE CLASS 300 RF BOLTED BONNET Vl DOUGLAS CHERO GLOBE VALVE Series R35x/30 Class: 300 CARBON STEEL GLOBE VALVE CLASS 300 RF Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 300 p.s.i. at 850ºF | 740 p.s.i. at 100ºF Hydraulic (minimum): Body 1125 p.s.i. Seat 825 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Flanges as per ASME B16.5, ASME B16.10 Standards 1 Ha Refer to Material list of construction Pf Ff SERIES R35x/30 - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 300 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) 010102304040478 1/2” 152.4 152 90 9 3.4 010102304040450 3/4” 177.8 159 90 12.5 4.8 1” 203.2 182 100 17.5 7.0 010102304040449 - 1.1/4” 010102304040448 1.1/2” 228.6 283 140 281 14.2 2” 266.7 306 140 322 17.4 - SERIES R35x/30 - GLOBE VALVE A105/F6 U TRIM No. 5 - CLASS 300 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) 010102304040478 1/2” 152.4 152 90 9 3.4 010102304040450 3/4” 177.8 159 90 12.5 4.8 1” 203.2 182 100 17.5 7.0 010102304040449 - 1.1/4” 010102304040448 1.1/2” 228.6 283 140 281 14.2 2” 266.7 306 140 322 17.4 - æ Full Bore Design and special designs, on request 1 Pf = 29.5 with integral stellited seat 2 Pf = 35.0 with integral stellited seat Telephone +34 913 581 212 Fax +34 913 580 488 314 e-mail Web gral@saidi.es www.saidi.es ANSI GLOBE VALVE CLASS 600 RF BOLTED BONNET Vl DOUGLAS CHERO GLOBE VALVE Series R35x/60 Class: 600 CARBON STEEL GLOBE VALVE CLASS 600 RF Specifications Material Pressure Rating Tests Ha Carbon steel ASTM A1051 600 p.s.i. at 850ºF | 1480 p.s.i. at 100ºF Hydraulic (minimum): Body 2225 p.s.i. Seat 1650 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Flanges as per ASME B16.5, ASME B16.10 Standards Refer to Material list of construction 1 Pf Ff SERIES R35x/60 - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 600 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) 010102304042913 1/2” 165.1 152 90 9 3.6 010102304042863 3/4” 190.5 159 90 12.5 5.1 1” 215.9 182 100 17.5 7.8 010102304042848 - 1.1/4” - 1.1/2” 241.3 283 140 281 14.2 - 2” 292.1 306 140 322 19.4 SERIES R35x/60 - GLOBE VALVE A105/F6 U TRIM No. 5 - CLASS 600 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 165.1 152 90 9 3.6 - 3/4” 190.5 159 90 12.5 5.1 215.9 182 100 17.5 7.8 - 1” - 1.1/4” - 1.1/2” 241.3 283 140 281 14.2 - 2” 292.1 306 140 322 19.4 æ Full Bore Design and special designs, on request 1 Pf = 29.5 with integral stellited seat 2 Pf = 35.0 with integral stellited seat Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 315 GLOBEVALVES GLOBE VALVE CLASS 1500 SW/NPT/BW BOLTED BONNET Vl DOUGLAS CHERO GLOBE VALVE Series 75x Class: 1500 CARBON STEEL GLOBE VALVE CLASS 1500 SW/NPT/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5575 p.s.i. Seat 4100 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Standards Ha Refer to Material list of construction 1 . x Pf Ff SERIES 75x - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 1500 SW Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 218 120 11 5.6 - 3/4” 115 274 175 14.5 8.0 1” 130 286 175 19 9.3 010102304040648 - 1.1/4” - 1.1/2” 210 427 260 31 26.2 - 2” 240 433 260 37.5 34.5 SERIES 75x - GLOBE VALVE A105/F6 U TRIM No. 5 - CLASS 1500 SW Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 218 120 11 5.6 010102304042513 3/4” 115 274 175 14.5 8.0 130 286 175 19 9.3 - 1” - 1.1/4” - 1.1/2” 210 427 260 31 26.2 2” 240 433 260 37.5 34.5 010102304042658 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 316 e-mail Web gral@saidi.es www.saidi.es ANSI GLOBE VALVE CLASS 1500 SW/NPT/BW WELDED BONNET Vl DOUGLAS CHERO GLOBE VALVE Series 75xWB Class: 1500 CARBON STEEL GLOBE VALVE CLASS 1500 SW/NPT/BW W.B. Specifications Material Pressure Rating Tests Available also fillet Ha Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5575 p.s.i. Seat 4100 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Standards Refer to Material list of construction 1 Pf Ff SERIES 75xWB - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 1500 SW W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 90 203 120 11 1.9 - 3/4” 110 227 175 14.5 3.3 127 233 175 19 5.2 - 1” - 1.1/4” - 1.1/2” 170 310 200 31 10.3 - 2” 210 402 260 37.5 17.8 SERIES 75xWB - GLOBE VALVE A105/F6 U TRIM No. 5 - CLASS 1500 SW W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) 010102304040458 1/2” 90 203 120 11 1.9 010102304040461 3/4” 110 227 175 14.5 3.3 1” 127 233 175 19 5.2 010102304040462 - 1.1/4” 010102304040463 1.1/2” 170 310 200 31 10.3 010102304042658 2” 210 402 260 37.5 17.8 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 317 GLOBEVALVES GLOBE VALVE CLASS 1500 RF BOLTED BONNET Vl DOUGLAS CHERO GLOBE VALVE Series 75x/150 Class: 1500 CARBON STEEL GLOBE VALVE CLASS 1500 RF Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5575 p.s.i. Seat 4100 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Flanges as per ASME B16.5, ASME B16.10 Standards Ha Refer to Material list of construction 1 . x Pf Ff SERIES 75x/150 - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 1500 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 215.9 218 120 11 9.4 - 3/4” 228.6 274 175 14.5 15.2 254.0 286 175 19 17.3 - 1” - 1.1/4” - 1.1/2” 304.8 427 260 31 37.9 - 2” 368.3 433 260 37.5 55.2 SERIES 75x/150 - GLOBE VALVE A105/F6 U TRIM No. 5 - CLASS 1500 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 215.9 218 120 11 9.4 - 3/4” 228.6 274 175 14.5 15.2 254.0 286 175 19 17.3 - 1” - 1.1/4” - 1.1/2” 304.8 427 260 31 37.9 - 2” 368.3 433 260 37.5 55.2 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 318 e-mail Web gral@saidi.es www.saidi.es ANSI GLOBE VALVE CLASS 2500 SW/NPT/BW BOLTED BONNET Vl DOUGLAS CHERO GLOBE VALVE Series 105x Class: 2500 CARBON STEEL GLOBE VALVE CLASS 2500 SW/NPT/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9275 p.s.i. Seat 6800 p.s.i. Air under water: Seat 85 p.s.i. Construction ASME B16.34 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Standards Ha 1 Refer to Material list of construction Pf Ff SERIES 105x - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 2500 SW Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 218 140 10 5.8 - 3/4” 115 260 200 13 8.3 130 268 200 18 9.7 - 1” - 1.1/4” - 1.1/2” 210 427 260 25 26.8 - 2” 240 433 350 34 35.3 SERIES 105x - GLOBE VALVE A105/F6 U TRIM No. 5 - CLASS 2500 SW Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 218 140 10 5.8 - 3/4” 115 260 200 13 8.3 130 268 200 18 9.7 - 1” - 1.1/4” - 1.1/2” 210 427 260 25 26.8 - 2” 240 433 350 34 35.3 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 319 GLOBEVALVES GLOBE VALVE CLASS 2500 SW/NPT/BW WELDED BONNET DOUGLAS CHERO GLOBE VALVE Series 105xWB Vl Class: 2500 CARBON STEEL GLOBE VALVE CLASS 2500 SW/NPT/BW WELDED BONNET Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9275 p.s.i. Seat 6800 p.s.i. Air under water: Seat 85 p.s.i. Construction ASME B16.34 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Standards Available also fillet Ha Refer to Material list of construction 1 Pf Ff SERIES 105xWB - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 2500 SW W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 209 140 10 2.5 - 3/4” 127 238 200 13 4.1 155 257 200 18 6.2 - 1” - 1.1/4” - 1.1/2” 210 386 260 25 11.8 - 2” 240 407 350 34 28 SERIES 105xWB - GLOBE VALVE A105/F6 U TRIM No. 5 - CLASS 2500 SW W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 209 140 10 2.5 - 3/4” 127 238 200 13 4.1 155 257 200 18 6.2 - 1” - 1.1/4” - 1.1/2” 210 386 260 25 11.8 - 2” 240 407 350 34 28 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 320 e-mail Web gral@saidi.es www.saidi.es ANSI GLOBE VALVE CLASS 2500 RF BOLTED BONNET Vl DOUGLAS CHERO GLOBE VALVE Series 105x/250 Class: 2500 CARBON STEEL GLOBE VALVE CLASS 2500 RF Specifications Material Pressure Rating Tests Ha Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9275 p.s.i. Seat 6800 p.s.i. Air under water: Seat 85 p.s.i. Construction ASME B16.34 Flanges as per ASME B16.5, ASME B16.10 Standards Refer to Material list of construction 1 Pf Ff SERIES 105x/250 - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 2500 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 263.5 218 140 10 9.6 - 3/4” 273.0 274 200 13 15.4 308.0 286 200 18 17.4 - 1” - 1.1/4” - 1.1/2” 384.2 427 260 25 38.5 - 2” 450.8 433 350 34 55.9 SERIES 105x/250 - GLOBE VALVE A105/F6 U TRIM No. 5 - CLASS 2500 RF Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 263.5 218 140 10 9.6 - 3/4” 273.0 274 200 13 15.4 308.0 286 200 18 17.4 - 1” - 1.1/4” - 1.1/2” 384.2 427 260 25 38.5 - 2” 450.8 433 350 34 55.9 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 321 GLOBEVALVES GLOBE VALVE CLASS 4500 SW/NPT/BW WELDED BONNET Vl DOUGLAS CHERO GLOBE VALVE Series 215xWB Class: 4500 CARBON STEEL GLOBE VALVE CLASS 4500 SW/NPT/BW W.B. Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 4010 p.s.i. at 850ºF | 11110 p.s.i. at 100ºF Hydraulic (minimum): Body 16650 p.s.i. Seat 12210 p.s.i. Air under water: Seat 85 p.s.i. Construction ASME B16.34 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Standards Ha Refer to Material list of construction 1 Pf Ff SERIES 215xWB - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 4500 SW W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 127 230 175 7 4.1 - 3/4” 155 277 200 11 6.2 170 335 260 14 11.8 - 1” - 1.1/4” - 1.1/2” 240 431 350 25 28.0 - 2” 240 450 350 30 42.0 SERIES 215xWB - GLOBE VALVE A105/F6 U TRIM No. 5 - CLASS 4500 SW W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 127 230 175 7 4.1 - 3/4” 155 277 200 11 6.2 170 335 260 14 11.8 - 1” - 1.1/4” - 1.1/2” 240 431 350 25 28.0 - 2” 240 450 350 30 42.0 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 322 e-mail Web gral@saidi.es www.saidi.es ANSI GLOBE VALVE CLASS 800 SW/NPT CRYOGENIC Vl DOUGLAS CHERO GLOBE VALVE Series CR35xB Class: 800 CARBON STEEL GLOBE VALVE CLASS 800 SW/NPT CRYOGENIC Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Standards 1 Refer to Material list of construction Ha Pf Ff SERIES CR35xB - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW CRYOGENIC Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 333 90 9 3.1 - 3/4” 90 365 90 12 3.6 - 1” 110 401 100 17.5 5.7 - 1.1/4” 127 462 120 22.5 8.8 - 1.1/2” 155 507 140 281 11.7 - 2” 170 531 140 322 14.4 æ Full Bore Design and special designs, on request 1 Pf = 29.5 with integral stellited seat 2 Pf = 35.0 with integral stellited seat Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 323 GLOBEVALVES GLOBE VALVE CLASS 800 SW/NPT CRYOGENIC W.B. DOUGLAS CHERO GLOBE VALVE Series CR35x Vl Class: 800 CARBON STEEL GLOBE VALVE CLASS 800 SW/NPT CRYOGENIC W.B. Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Standards Refer to Material list of construction 1 Ha Pf Ff SERIES CR35x - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW CRYOGENIC W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 333 90 9.0 2.6 - 3/4” 90 365 90 12.5 3.1 - 1” 110 401 100 17.5 5.2 - 1.1/4” 127 462 120 22.5 8.6 - 1.1/2” 155 507 140 281 12.4 - 2” 170 531 140 322 15.7 æ Full Bore Design and special designs, on request Pf = 29.5 with integral stellited seat Pf = 35.0 with integral stellited seat 1 2 Telephone +34 913 581 212 Fax +34 913 580 488 324 e-mail Web gral@saidi.es www.saidi.es ANSI GLOBE VALVE CLASS 800 SW/NPT BELLOWS SEALED Vl DOUGLAS CHERO GLOBE VALVE Series SR25xB Class: 800 CARBON STEEL GLOBE VALVE CLASS 800 SW/NPT BELLOWS SEALED Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 2180 p.s.i. Seat 1495 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Standards 1 Refer to Material list of construction Ha Pf Ff SERIES SR25xB - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW BELLOWS SEALED Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 234 90 9 2.5 - 3/4” 90 243 90 12.5 2.8 - 1” 110 290 100 17.5 5.2 - 1.1/4” 127 320 120 22.5 7.5 - 1.1/2” 155 363 140 281 11.4 - 2” 170 389 140 322 15.4 æ Full Bore Design and special designs, on request Pf = 29.5 with integral stellited seat Pf = 35.0 with integral stellited seat 1 2 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 325 GLOBEVALVES GLOBE VALVE CLASS 800 SW/NPT BELLOWS SEALED W.B. Vl DOUGLAS CHERO GLOBE VALVE Series SR25x Class: 800 CARBON STEEL GLOBE VALVE CLASS 800 SW/NPT BELLOWS SEALED W.B. Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 2180 p.s.i. Seat 1495 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Standards Refer to Material list of construction 1 Ha Pf Ff SERIES SR25x - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW BELLOWS SEALED W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 235 90 9 2.3 - 3/4” 90 259 90 12.5 2.6 - 1” 110 302 100 17.5 4.3 - 1.1/4” 127 329 120 22.5 6.8 - 1.1/2” 155 354 140 281 9.6 - 2” 170 390 140 322 13.8 æ Full Bore Design and special designs, on request 1 Pf = 29.5 with integral stellited seat 2 Pf = 35.0 with integral stellited seat Telephone +34 913 581 212 Fax +34 913 580 488 326 e-mail Web gral@saidi.es www.saidi.es ANSI GLOBE VALVE CLASS 800 SW/NPT ISRS Vl DOUGLAS CHERO GLOBE VALVE Series IR35xWF Class: 800 CARBON STEEL GLOBE VALVE CLASS 800 SW/NPT ISRS Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Standards Ha 1 Refer to Material list of construction 2 ISRS = Inside screw, Rising stem Pf Ff SERIES IR35xWF - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW ISRS Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 162 90 9.0 1.5 - 3/4” 90 189 90 12.5 1.8 - 1” 110 222 100 17.5 3.3 - 1.1/4” 127 250 120 22.5 5.5 - 1.1/2” 155 278 140 281 8.0 - 2” 170 314 140 322 10.6 æ Full Bore Design and special designs, on request 1 Pf = 29.5 with integral stellited seat 2 Pf = 35.0 with integral stellited seat Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 327 GLOBEVALVES GLOBE VALVE CLASS 800 SW/NPT LANTERN RING W.B. Vl DOUGLAS CHERO GLOBE VALVE Series LR35xWB Class: 800 CARBON STEEL GLOBE VALVE CLASS 800 SW/NPT LANTERN RING W.B. Available also fillet Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Standards Ha Refer to Material list of construction 1 Pf Ff SERIES LR35xWB - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW LANTERN RING W.B. Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 80 163 90 9.0 1.6 - 3/4” 90 168 90 12.0 1.8 - 1” 110 191 100 17.5 3.3 - 1.1/4” 127 20 120 22.5 5.2 - 1.1/2” 155 262 140 281 7.1 - 2” 170 288 140 322 9.9 æ Full Bore Design and special designs, on request 1 Pf = 29.5 with integral stellited seat 2 Pf = 35.0 with integral stellited seat Telephone +34 913 581 212 Fax +34 913 580 488 328 e-mail Web gral@saidi.es www.saidi.es ANSI ‘Y’ GLOBE VALVE CLASS 800 SW/NPT/BW WELDED BONNET Vl DOUGLAS CHERO ‘Y’ GLOBE VALVE Y31xWB Class: 800 CARBON STEEL ‘Y’ GLOBE VALVE CLASS 800 SW/NPT/BW WELDED BONNET Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Standards Ha 1 Refer to Material list of construction Pf Ff SERIES Y31xWB - ‘Y’ GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 800 SW WELDED BONNET Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/4” 80 147 90 8 2.4 - 3/8” 80 147 90 9 2.4 - 1/2” 80 147 90 12 2.4 - 3/4” 100 186 100 18 3.0 - 1” 110 220 120 22.5 4.0 - 1.1/4” 120 235 140 29.5 8.0 - 1.1/2” 160 305 140 35 10.0 - 2” 190 352 200 45.5 16.0 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 329 GLOBEVALVES ‘Y’ GLOBE VALVE CLASS 1500 SW/NPT/BW WELDED BONNET Vl DOUGLAS CHERO ‘Y’ GLOBE VALVE Y75xWB Class: 1500 CARBON STEEL ‘Y’ GLOBE VALVE CLASS 800 SW/NPT/BW WELDED BONNET Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5575 p.s.i. Seat 4100 p.s.i. Air under water: Seat 85 p.s.i. Construction ISO 15761 - ASME B16.34 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Standards Ha Refer to Material list of construction 1 Pf Ff SERIES Y75xWB - ‘Y’ GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 1500 SW WELDED BONNET Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 100 186 120 12 3.0 - 3/4” 110 220 175 16 4.0 - 1” 120 229 175 20 7.0 - 1.1/4” 160 305 200 28 10.5 - 1.1/2” 190 348 200 32 15.0 - 2” 190 389 260 43 19.0 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 330 e-mail Web gral@saidi.es www.saidi.es ANSI ‘Y’ GLOBE VALVE CLASS 2500 SW/NPT/BW WELDED BONNET Vl DOUGLAS CHERO ‘Y’ GLOBE VALVE Y115xWB Class: 2500 CARBON STEEL ‘Y’ GLOBE VALVE CLASS 2500 SW/NPT/BW WELDED BONNET Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9275 p.s.i. Seat 6800 p.s.i. Air under water: Seat 85 p.s.i. Construction ASME B16.34 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Welding ASME B16.25 Standards Ha 1 Refer to Material list of construction Pf Ff SERIES Y115xWB - ‘Y’ GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 2500 SW WELDED BONNET Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 217 140 10 - 3/4” 120 276 200 13 4.0 5.0 - 1” 120 276 200 18 11.0 - 1.1/4” 190 388 260 24 11.0 - 1.1/2” 190 388 260 28 17.0 - 2” 210 402 350 35 23.0 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 331 CHECKVALVES CHECK VALVE CLASS 800 SW/NPT/BW BOLTED COVER Piston (.P4../) DOUGLAS CHERO CHECK VALVE Series Rtt5x Class: 800 Ha CARBON STEEL CHECK VALVE 800 SW/NPT/BW Specifications Material Pressure Rating Tests Standards Pf Carbon Steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Design as per ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Ff Refer to Material list of construction 1 Pf Pf Ball (.B4../) SERIES Rtt5x - PISTON CHECK VALVE A105/F6 TRIM No. 1 - 800 SW BOLTED COVER Article Number DN Ff (mm) Ha (mm) Pf3 (mm) Weight (kg) 010102304040486 1/2” 80 50 9.0 1.1 010102304040487 3/4” 90 56 12.5 1.8 010102304040488 1” 110 74 17.5 2.6 - 1.1/4” 127 79 22.5 3.6 010102304040490 1.1/2” 155 100 281 5.5 010102304040491 2” 170 109 322 8.4 SERIES Rtt5x - PISTON CHECK VALVE A105/F6 U TRIM No. 5 - 800 SW BOLTED COVER Article Number DN Ff (mm) Ha (mm) Pf3 (mm) Weight (kg) 010102304042941 1/2” 80 50 9.0 1.1 010102304042941 3/4” 90 56 12.5 1.8 010102304040494 1” 110 74 17.5 2.6 - 1.1/4” 127 79 22.5 3.6 010102304040492 1.1/2” 155 100 281 5.5 010102304042942 2” 170 109 322 8.4 SERIES Rtt5x - PISTON CHECK VALVE A105/F6 TRIM No. 1 - 800 NPT BOLTED COVER Article Number DN Ff (mm) Ha (mm) Pf3 (mm) Weight (kg) 010102304040504 1/2” 80 50 9.0 1.1 010102304040506 3/4” 90 56 12.5 1.8 010102304040483 1” 110 74 17.5 2.6 010102304040511 1.1/4” 127 79 22.5 3.6 010102304040510 1.1/2” 155 100 281 5.5 010102304040509 2” 170 109 322 8.4 æ Full Bore Design and special executions, on request Pf = 29.5 with integral stellited seats Pf = 35.0 with integral stellited seats 3 Pf = Dimensions for Piston and Ball Check 1 2 Telephone +34 913 581 212 Fax +34 913 580 488 332 e-mail Web gral@saidi.es www.saidi.es Swing (.S5../) ANSI CHECK VALVE CLASS 800 SW/NPT/BW WELDED COVER Ha DOUGLAS CHERO CHECK VALVE Rtt45xWC Pf Class: 800 CARBON STEEL CHECK VALVE CLASS 800 SW/NPT/BW WELDED COVER Specifications Material Pressure Rating Tests Standards Ff Piston (.P4../) Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Refer to Material list of construction 1 Pf Pf Swing (.S5../) Ball (.B4../) SERIES Rtt45xWC - PISTON CHECK VALVE A105/F6 TRIM No. 1 - CLASS 800 SW WELDED COVER Article Number DN Ff (mm) Ha (mm) Pf (mm) Weight (kg) - 1/2” 80 48 9.0 0.8 - 3/4” 90 51 12.5 1.1 - 1” 110 63 17.5 2.0 - 1.1/4” 127 71 22.5 3.3 - 1.1/2” 155 86 281 4.9 - 2” 170 99 322 7.3 æ Full Bore Design and special designs, on request Pf = 29.5 with integral stellited seat Pf = 35.0 with integral stellited seat 1 2 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 333 CHECKVALVES CHECK VALVE CLASS 150 RF BOLTED COVER Piston (.P4../15) DOUGLAS CHERO CHECK VALVE Rtt5x/15 Class: 150 Ha CARBON STEEL CHECK VALVE CLASS 150 RF Pf Specifications Material Pressure Rating Tests Standards 1 Carbon steel ASTM A105 150 p.s.i. at 550ºF | 285 p.s.i. at 100ºF Hydraulic (minimum): Body 450 p.s.i. Seat 325 p.s.i. Construction ISO 15761 Flanges as per ASME B16.5, ASME B16.10 1 Refer to Material list of construction Ff Pf Ball (.B4../15) SERIES Rtt5x/15 - PISTON CHECK VALVE A105/F6 TRIM No. 1 - CLASS 150 RF BOLTED COVER Article Number DN Ff (mm) Ha (mm) Pf3 (mm) Weight (kg) - 1/2” 107.9 84 9.0 2.6 - 3/4” 117.5 87 12.5 3.8 1” 127.0 92 17.5 5.1 010102304042282 - 1.1/4” - 1.1/2” 165.1 97 281 8.4 - 2” 203.2 124 322 14.2 æ Full Bore Design and special executions, on request Pf = 29.5 with integral stellited seats Pf = 35.0 with integral stellited seats 3 Pf = Dimensions for Piston and Ball Check 1 2 Telephone +34 913 581 212 Fax +34 913 580 488 334 e-mail Web gral@saidi.es www.saidi.es Pf Swing (.S5../15) ANSI CHECK VALVE CLASS 300 RF BOLTED COVER Piston (.P4../30) Pf Ha DOUGLAS CHERO CHECK VALVE Rtt5x/30 Class: 300 CARBON STEEL CHECK VALVE CLASS 300 RF Specifications Material Presure Range Tests Standards Carbon Steel ASTM A1051 300 p.s.i. at 850ºF | 740 p.s.i. at 100ºF Hydraulic (minimum): Body 1125 p.s.i. Seat 825 p.s.i. Design ISO 15761 Flanges as per ASME B16.5, ASME B16.10 Refer to materials list of construction 1 Ff Pf Pf Swing (.S5../30) Ball (.B4../30) SERIES Rtt5x/30 - PISTON CHECK VALVE A105/F6 TRIM No. 1 - CLASS 300 RF BOLTED COVER Article Number DN Ff (mm) Ha (mm) Pf1 (mm) Weight (kg) - 1/2” 152.4 50 9.0 - 3/4” 177.8 56 12.5 2.5 4.2 - 1” 203.22 74 17.5 5.7 - 1.1/4” - 1.1/2” 228.62 100 283 11.2 - 2” 266.7 109 324 14.4 æ Full Bore Design and special executions, on request 4 1 2 3 Pf = Dimensions for Piston and Ball Check For Swing check 1” is 215.9 mm and for 1.1/2” is 241.3 mm Pf = 29.5 with integral stellited seats Pf = 35.0 with integral stellited seats Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 335 CHECKVALVES CHECK VALVE CLASS 600 RF BOLTED COVER Piston (.P4../60) DOUGLAS CHERO CHECK VALVE Series Rtt5x/60 Class: 600 CARBON STEEL CHECK VALVE CLASS 600 RF Pf Ha Specifications Material Pressure Rating Tests Standards 1 Carbon steel ASTM A1051 600 p.s.i. at 850ºF | 1480 p.s.i. at 100ºF Hydraulic (minimum): Body 2225 p.s.i. Seat 1650 p.s.i. Construction ISO 15761 Flanges as per ASME B16.5, ASME B16.10 Refer to Material list of construction Ff Pf Ball (.B4../60) SERIES Rtt5x/60 - PISTON CHECK VALVE A105/F6 TRIM No. 1 - CLASS 600 RF BOLTED COVER Article Number DN Ff (mm) Ha (mm) Pf1 (mm) Weight (kg) - 1/2” 165.1 50 9.0 3.1 - 3/4” 190.5 56 12.5 5.0 - 1” 215.9 74 17.5 7.3 - 1.1/4” - 1.1/2” 241.3 100 282 12 - 2” 292.1 109 323 16.6 æ Full Bore Design and special designs, on request Pf = Dimensions for Piston and Ball Check Pf = 29.5 with integral stellited seats 3 Pf = 35.0 with integral stellited seats 1 2 Telephone +34 913 581 212 Fax +34 913 580 488 336 e-mail Web gral@saidi.es www.saidi.es Pf Swing (.S5../60) ANSI CHECK VALVE CLASS 1500 SW/NPT/BW BOLTED COVER Piston (P.../) . DOUGLAS CHERO CHECK VALVE Series t85x x Ha Class: 1500 CARBON STEEL CHECK VALVE CLASS 1500 SW/NPT/BW BOLTED COVER Specifications Material Pressure Rating Tests Standards Pf Ff 1 Carbon steel ASTM A1051 1500 p.s.i. at 550ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5575 p.s.i. Seat 4100 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Refer to Material list of construction Pf Pf Swing (S.../) Ball (B.../) SERIES t85x - PISTON CHECK VALVE A105/F6 TRIM No. 1 - CLASS 1500 SW BOLTED COVER Article Number DN Ff (mm) Ha (mm) Pf1 (mm) Weight (kg) - 1/2” 110 93 11 3.8 - 3/4” 115 109 14.5 5.9 130 122 19 6.8 - 1” - 1.1/4” - 1.1/2” 210 158 31 18.8 - 2” 240 171 37.5 23.7 æ Full Bore Design and special designs, on request Pf = Dimensions for Piston and Ball Check 1 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 337 CHECKVALVES CHECK VALVE CLASS 1500 SW/NPT/BW WELDED COVER Ha DOUGLAS CHERO CHECK VALVE Series t85xWC Class: 1500 CARBON STEEL CHECK VALVE CLASS 1500 SW/NPT/BW WELDED COVER Pf Specifications Material Pressure Rating Tests Standards 1 Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5575 p.s.i. Seat 4100 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Ff Piston (.P.../) Refer to Material list of construction Pf Pf Swing (.S.../) Ball (.B.../) SERIES t85xWC - PISTON CHECK VALVE A105/F6 TRIM No. 1 - CLASS 1500 SW WELDED COVER Article Number DN Ff (mm) Ha (mm) Pf1 (mm) Weight (kg) - 1/2” 90 51 11 1.4 - 3/4” 110 57 14.5 2.4 127 62 19 3.8 - 1” - 1.1/4” - 1.1/2” 170 90 31 8.0 - 2” 210 117 37.5 14.5 æ Full Bore Design and special designs, on request Pf = Dimensions for Piston and Ball Check 1 Telephone +34 913 581 212 Fax +34 913 580 488 338 e-mail Web gral@saidi.es www.saidi.es ANSI CHECK VALVE CLASS 1500 RF BOLTED COVER Piston (P.../150) . DOUGLAS CHERO CHECK VALVE Series t85x/150 x Ha Class: 1500 CARBON STEEL CHECK VALVE CLASS 1500 RF BOLTED COVER Pf Specifications Material Pressure Rating Tests Standards Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5575 p.s.i. Seat 4100 p.s.i. Construction ISO 15761 Flanges as per ASME B16.5, ASME B16.10 Refer to Material list of construction 1 Ff Pf Pf Ball (B.../150) Swing (S.../150) SERIES t85x/150 - PISTON CHECK VALVE A105/F6 TRIM No. 1 - CLASS 1500 RF BOLTED COVER Article Number DN Ff (mm) Ha (mm) Pf1 (mm) Weight (kg) - 1/2” 215.9 93 11 7.5 - 3/4” 228.6 109 14.5 10.9 254.0 122 19 14.4 - 1” - 1.1/4” - 1.1/2” 304.8 158 31 30.3 - 2” 368.3 171 37.5 44.0 æ Full Bore Design and special designs, on request Pf = Dimensions for Piston and Ball Check 1 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 339 CHECKVALVES CHECK VALVE CLASS 2500 SW/NPT/BW BOLTED COVER Piston (P..../) DOUGLAS CHERO CHECK VALVE Series t125x Class: 2500 CARBON STEEL CHECK VALVE 2500 SW/NPT/BW BOLTED COVER Ha Specifications Material Pressure Rating Tests Standards Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9275 p.s.i. Seat 6800 p.s.i. Construction ASME B16.34 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Pf Ff Refer to Material list of construction 1 Pf Pf Ball (B..../) SERIES t125x - PISTON CHECK VALVE A105/F6 TRIM No. 1 - CLASS 2500 SW BOLTED COVER Article Number DN Ff (mm) Ha (mm) Pf1 (mm) Weight (kg) - 1/2” 110 93 10 4.0 - 3/4” 115 109 13 6.2 - 1” 130 122 18 7.2 - 1.1/4” - 1.1/2” 210 158 25 19.4 - 2” 240 171 34 24.5 æ Full Bore Design and special designs, on request Pf = Dimensions for Piston and Ball Check 1 Telephone +34 913 581 212 Fax +34 913 580 488 340 e-mail Web gral@saidi.es www.saidi.es Swing (S..../) ANSI CHECK VALVE CLASS 2500 SW/NPT/BW WELDED COVER Ha DOUGLAS CHERO CHECK VALVE Series t125xWC Class: 2500 CARBON STEEL CHECK VALVE CLASS 2500 SW/NPT/BW WELDED COVER Pf Specifications Material Pressure Rating Tests Standards Ff Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9275 p.s.i. Seat 6800 p.s.i. Construction ASME B16.34 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Piston (.P.../) Refer to Material list of construction 1 Pf Pf Swing (.S.../) Ball (.B.../) SERIES t125xWC - PISTON CHECK VALVE A105/F6 TRIM No. 1 - CLASS 2500 SW WELDED COVER Article Number DN Ff (mm) Ha (mm) Pf1 (mm) Weight (kg) - 1/2” 110 60 10 2.0 - 3/4” 127 71 13 3.2 - 1” 155 85 18 4.8 - 1.1/4” - 1.1/2” 210 120 25 9.6 - 2” 240 130 34 16 æ Full Bore Design and special designs, on request Pf = Dimensions for Piston and Ball Check 1 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 341 CHECKVALVES CHECK VALVE CLASS 2500 RF BOLTED COVER Piston (P.../250) DOUGLAS CHERO CHECK VALVE Series t125x/250 Class: 2500 CARBON STEEL CHECK VALVE CLASS 2500 RF BOLTED COVER Ha Specifications Material Pressure Rating Tests Standards Pf Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9275 p.s.i. Seat 6800 p.s.i. Construction ASME B16.34 Flanges as per ASME B16.5, ASME B16.10 Refer to Material list of construction 1 Ff Pf Pf Ball (B.../250) SERIES t125x/250 - PISTON CHECK VALVE A105/F6 TRIM No. 1 - CLASS 2500 RF BOLTED COVER Article Number DN Ff (mm) Ha (mm) Pf1 (mm) Weight (kg) - 1/2” 263.5 93 10 8.5 - 3/4” 273.0 109 13 12.5 308.0 122 18 19.2 - 1” - 1.1/4” - 1.1/2” 384.2 158 25 40.8 - 2” 450.8 171 34 59.0 æ Full Bore Design and special designs, on request Pf = Dimensions for Piston and Ball Check 1 Telephone +34 913 581 212 Fax +34 913 580 488 342 e-mail Web gral@saidi.es www.saidi.es Swing (S.../250) ANSI CHECK VALVE CLASS 4500 SW/NPT/BW WELDED COVER DOUGLAS CHERO CHECK VALVE Series P225xWC Class: 4500 CARBON STEEL CHECK VALVE CLASS 4500 SW/NPT/BW WELDED COVER Ha Specifications Material Pressure Rating Tests Standards Pf 1 Ff Carbon steel ASTM A1051 4010 p.s.i. at 850ºF | 11110 p.s.i. at 100ºF Hydraulic (minimum): Body 16650 p.s.i. Seat 12210 p.s.i. Construction ASME B16.34 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Refer to Material list of construction SERIES P225xWC - PISTON CHECK VALVE A105/F6 TRIM No. 1 - CLASS 4500 SW WELDED COVER Article Number DN Ff (mm) Ha (mm) Pf1 (mm) Weight (kg) - 1/2” 127 75 7 3.2 - 3/4” 155 90 11 4.8 - 1” 170 125 15 8 - 1.1/4” - 1.1/2” 240 145 25 16 - 2” 240 140 30 26 æ Full Bore Design and special designs, on request Pf = Dimensions for Piston and Ball Check 1 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 343 CHECKVALVES ‘Y’ CHECK VALVE CLASS 800 SW/NPT/BW WELDED COVER DOUGLAS CHERO ‘Y’ CHECK VALVE YP41xWC Class: 800 Ha CARBON STEEL ‘Y’ CHECK VALVE CLASS 800 SW/NPT/BW WELDED COVER Specifications Material Pressure Rating Tests Standards Pf Carbon steel ASTM A1051 800 p.s.i. at 850ºF | 1975 p.s.i. at 100ºF Hydraulic (minimum): Body 3000 p.s.i. Seat 2175 p.s.i. Construction ISO 15761 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Refer to Material list of construction 1 Ff SERIES YP41xWC - ‘Y’ CHECK VALVE A105/F6 TRIM No. 1 - CLASS 800 SW WELDED COVER Article Number DN Ff (mm) Ha (mm) Pf (mm) Weight (kg) - 1/4” 80 58 8 1.5 - 3/8” 80 58 9 1.5 - 1/2” 80 58 12.5 1.5 - 3/4” 100 74 18 2.5 - 1” 110 80 22.5 3.0 - 1.1/4” 120 86 29.5 5.5 - 1.1/2” 160 118 35 6.0 - 2” 190 142 45.5 9.0 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 344 e-mail Web gral@saidi.es www.saidi.es ANSI ‘Y’ CHECK VALVE CLASS 1500 SW/NPT/BW WELDED COVER DOUGLAS CHERO ‘Y’ CHECK VALVE YP85xWC Ha Pf Class: 1500 CARBON STEEL ‘Y’ CHECK VALVE CLASS 1500 SW/NPT/BW WELDED COVER Specifications Material Pressure Rating Tests Standards 1 Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5575 p.s.i. Seat 4100 p.s.i. Construction ISO 15761, ASME B16.34 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Refer to Material list of construction Ff SERIES YP85xWC - ‘Y’ CHECK VALVE A105/F6 TRIM No. 1 - CLASS 1500 SW WELDED COVER Article Number DN Ff (mm) Ha (mm) Pf (mm) Weight (kg) - 1/2” 100 80 12 2.5 - 3/4” 110 87 16 3.0 - 1” 120 90 20 4.5 - 1.1/4” 160 121 28 5.5 - 1.1/2” 190 146 32 8.0 - 2” 190 146 43 9.5 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 345 CHECKVALVES ‘Y’ CHECK VALVE CLASS 2500 SW/NPT/BW WELDED COVER DOUGLAS CHERO ‘Y’ CHECK VALVE YP125xWC Class: 2500 Ha CARBON STEEL ‘Y’ CHECK VALVE CLASS 2500 SW/NPT/BW WELDED COVER Specifications Material Pressure Rating Tests Standards Pf Carbon steel ASTM A105 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9275 p.s.i. Seat 6800 p.s.i. Construction ASME B16.34 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 1 Refer to Material list of construction 1 Ff SERIES YP125xWC - ‘Y’ CHECK VALVE A105/F6 TRIM No. 1 - CLASS 2500 SW WELDED COVER Article Number DN Ff (mm) Ha (mm) Pf (mm) Weight (kg) - 1/2” 110 87 10 3.2 - 3/4” 120 92 13 4.5 - 1” 120 92 18 4.5 - 1.1/4” 190 146 24 9.5 - 1.1/2” 190 146 28 9.5 - 2” 210 158 35 12.0 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 346 e-mail Web gral@saidi.es www.saidi.es ANSI ‘Y’ CHECK VALVE CLASS 4500 SW/NPT/BW WELDED COVER DOUGLAS CHERO ‘Y’ CHECK VALVE YP225xWC Ha Pf Class: 4500 CARBON STEEL ‘Y’ CHECK VALVE CLASS 4500 SW/NPT/BW WELDED COVER Specifications Material Pressure Rating Tests Standards 1 Carbon steel ASTM A1051 4010 p.s.i. at 850ºF | 11110 p.s.i. at 100ºF Hydraulic (minimum): Body 16650 p.s.i. Seat 12210 p.s.i. Construction ASME B16.34 Socket Weld ASME B16.11 Threaded ASME B1.20.1 Butt Weld ASME B16.25 Refer to Material list of construction Ff SERIES YP225xWC - ‘Y’ CHECK VALVE A105/F6 TRIM No. 1 - CLASS 4500 SW WELDED COVER Article Number DN Ff (mm) Ha (mm) Pf (mm) Weight (kg) - 1/2” 120 90 7 4.5 - 3/4” 160 120 11 7.5 190 145 14 9.5 - 1” - 1.1/4” - 1.1/2” 210 160 25 12.0 - 2” 230 200 30 23.0 æ Full Bore Design and special designs, on request Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 347 PRESSURE SEAL FORGED VALVES Telephone +34 913 581 212 Fax +34 913 580 488 348 e-mail Web gral@saidi.es www.saidi.es HIGH PRESSURE VALVES Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 349 GATEVALVES GATE VALVE CLASS 1500 SW/BW PRESSURE SEAL DOUGLAS CHERO GATE VALVE Series 65xPS Class: 1500 CARBON STEEL GATE VALVE CLASS 1500 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5575 p.s.i. Seat 4100 p.s.i. Air under water: Seat 85 p.s.i. ASME B16.34 Based upon ASME B16.34 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards Refer to Material list of construction 1 SERIES 65xPS - GATE VALVE A105/F6 TRIM No. 1 - CLASS 1500 SW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 219 120 11,5 5,9 - 3/4” 115 263 175 15,0 8,4 130 278 175 19,5 9,8 - 1” - 1.1/4” - 1.1/2” 210 400 225 32 26,8 - 2” 240 414 250 40 35,0 SERIES 65xPS - GATE VALVE A105/F6 U TRIM No. 5 - CLASS 1500 SW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 219 120 11,5 5,9 - 3/4” 115 263 175 15,0 8,4 130 278 175 19,5 9,8 - 1” - 1.1/4” - 1.1/2” 210 400 225 32 26,8 - 2” 240 414 250 40 35,0 Telephone +34 913 581 212 Fax +34 913 580 488 350 e-mail Web gral@saidi.es www.saidi.es ANSI GATE VALVE CLASS 2500 SW/BW PRESSURE SEAL DOUGLAS CHERO GATE VALVE Series 105xPS Class: 2500 CARBON STEEL CARBON STEEL CLASS 2500 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9275 p.s.i. Seat 6800 p.s.i. Air under water: Seat 85 p.s.i. ASME B16.34 Construction based upon ASME B16.34 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards 1 Refer to Material list of construction SERIES 105xPS - GATE VALVE A105/F6 TRIM No. 1 - CLASS 2500 SW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 233 140 10,0 6,1 - 3/4” 115 272 175 14,0 8,7 130 287 175 18,0 10,2 - 1” - 1.1/4” - 1.1/2” 210 398 250 31,0 27,4 - 2” 240 438 350 36,5 36,0 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 351 GATEVALVES GATE VALVE CLASS 900 SW/BW PRESSURE SEAL DOUGLAS CHERO GATE VALVE Series 60xPS Class: 900 CARBON STEEL GATE VALVE CLASS 900 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 900 p.s.i. at 850ºF | 2220 p.s.i. at 100ºF Hydraulic (minimum): Body 3330 p.s.i. Seat 2442 p.s.i. Air under water: Seat 85 p.s.i. API 598, BS EN 12266 (Part 1) Construction based upon API 600 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards Refer to Material list of construction 1 SERIES 60xPS - GATE VALVE A105/F6 TRIM No. 1 - CLASS 900 SW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 3” 305 600 350 72 85 - 4” 356 660 350 98 160 - 6” 508 1000 Gear operator 146 410 - 8” 660 1300 Gear operator 190 737 - 10” 787 1495 Gear operator 210 245 - 12” 864 1690 Gear operator 245 1545 SERIES 60xPS - GATE VALVE A105/F6 U TRIM No. 5 - CLASS 900 SW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 3” 305 600 350 72 85 - 4” 356 660 350 98 160 - 6” 508 1000 Gear operator 146 410 - 8” 660 1300 Gear operator 190 737 - 10” 787 1495 Gear operator 210 245 - 12” 864 1690 Gear operator 245 1545 Telephone +34 913 581 212 Fax +34 913 580 488 352 e-mail Web gral@saidi.es www.saidi.es ANSI GATE VALVE CLASS 1500 SW/BW PRESSURE SEAL DOUGLAS CHERO GATE VALVE Series 65xPS Class: 1500 CARBON STEEL GATE VALVE CLASS 1500 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5557 p.s.i. Seat 4075 p.s.i. Air under water: Seat 85 p.s.i. API 598, BS EN 12266 (Part 1) Design Standards 1 Construction based upon API 600 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Refer to Material list of construction SERIES 65xPS - GATE VALVE A105/F6 TRIM No. 1 - CLASS 1500 SW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 3” 305 630 350 69 90 - 4” 406 690 350 98 170 - 6” 559 1100 Gear operator 137 430 - 8” 711 1350 Gear operator 178 750 - 10” 864 1495 Gear operator 210 1015 - 12” 864 1690 Gear operator 245 1545 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 353 GATEVALVES GATE VALVE CLASS 2500 SW/BW PRESSURE SEAL DOUGLAS CHERO GATE VALVE Series 105xPS Class: 2500 CARBON STEEL GATE VALVE CLASS 2500 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9255 p.s.i. Seat 6787 p.s.i. Air under water: Seat 85 p.s.i. API 598, BS EN 12266 (Part 1) Construction based upon API 600 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards Refer to Material list of construction 1 SERIES 105xPS - GATE VALVE A105/F6 TRIM No. 1 - CLASS 2500 SW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 3” 368 600 350 57 95 - 4” 457 660 Gear operator 73 170 - 6” 610 1000 Gear operator 111 430 - 8” 762 1300 Gear operator 146 790 - 10” 864 1400 Gear operator 184 1400 - 12” 864 1770 Gear operator 218 1850 Telephone +34 913 581 212 Fax +34 913 580 488 354 e-mail Web gral@saidi.es www.saidi.es ANSI GLOBEVALVES Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 355 GLOBEVALVES GLOBE VALVE CLASS 1500 SW/BW PRESSURE SEAL DOUGLAS CHERO GLOBE VALVE Series 75xPS Class: 1500 CARBON STEEL GLOBE VALVE CLASS 1500 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5575 p.s.i. Seat 4100 p.s.i. Air under water: Seat 85 p.s.i. ASME B16.34 Construction based upon ASME B16.34 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards Refer to Material list of construction 1 SERIES 75xPS - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 1500 SW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 223 120 11,0 4,7 - 3/4” 115 270 140 14 7,4 130 286 140 18,0 8,4 - 1” - 1.1/4” - 1.1/2” 210 408 260 30 24,8 - 2” 240 420 260 35 26 Telephone +34 913 581 212 Fax +34 913 580 488 356 e-mail Web gral@saidi.es www.saidi.es ANSI GLOBE VALVE CLASS 2500 SW/BW PRESSURE SEAL DOUGLAS CHERO GLOBE VALVE Series 115xPS Class: 2500 CARBON STEEL GLOBE VALVES CLASS 2500 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9275 p.s.i. Seat 6800 p.s.i. Air under water: Seat 85 p.s.i. ASME B16.34 Construction based upon ASME B16.34 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards 1 Refer to Material list of construction SERIES 115xPS - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 2500 SW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 1/2” 110 238 120 11,0 5,7 - 3/4” 115 276 200 14,0 7,9 - 1” 130 295 200 18,0 9,2 - 1.1/4” - 1.1/2” 210 406 260 30,0 29,1 - 2” 240 437 350 35,0 35,0 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 357 GLOBEVALVES GLOBE VALVE CLASS 900 SW/BW PRESSURE SEAL DOUGLAS CHERO GLOBE VALVE Series 70xPS Class: 900 CARBON STEEL GLOBE VALVE CLASS 900 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 900 p.s.i. at 850ºF | 2220 p.s.i. at 100ºF Hydraulic (minimum): Body 3330 p.s.i. Seat 2442 p.s.i. Air under water: Seat 85 p.s.i. API 598, BS EN 12266 (Part 1) Construction based upon BS 1873 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards Refer to Material list of construction 1 SERIES 70xPS - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 900 SW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 3” 305 600 350 78 90 - 4” 356 650 350 102 170 - 6” 508 750 Gear operator 154 430 - 8” 660 1000 Gear operator 180 750 - 10” 838 1750 Gear operator 195 1195 - 12” 965 1970 Gear operator 231 1910 Telephone +34 913 581 212 Fax +34 913 580 488 358 e-mail Web gral@saidi.es www.saidi.es ANSI GLOBE VALVE CLASS 1500 SW/BW PRESSURE SEAL DOUGLAS CHERO GLOBE VALVE Series 75xPS Class: 1500 CARBON STEEL GLOBE VALVE CLASS 1500 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5557 p.s.i. Seat 4075 p.s.i. Air under water: Seat 85 p.s.i. API 598, BS EN 12266 (Part 1) Construction based upon BS 1873 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards 1 Refer to Material list of construction SERIES 75xPS - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 1500 SW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 3” 305 600 350 78 90 - 4” 406 650 350 102 170 - 6” 559 750 Gear operator 154 430 - 8” 711 1000 Gear operator 180 750 - 10” 991 1410 Gear operator 195 1250 - 12” 1130 1590 Gear operator 231 1980 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 359 GLOBEVALVES GLOBE VALVE CLASS 2500 SW/BW PRESSURE SEAL DOUGLAS CHERO GLOBE VALVE Series 115xPS Class: 2500 CARBON STEEL GLOBE VALVE CLASS 2500 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9255 p.s.i. Seat 6787 p.s.i. Air under water: Seat 85 p.s.i. API 598, BS EN 12266 (Part 1) Construction based upon BS 1873 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards Refer to Material list of construction 1 SERIES 115xPS - GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 2500 SW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 3” 368 600 350 78 95 - 4” 457 660 Gear operator 102 170 - 6” 610 800 Gear operator 154 430 - 8” 762 1100 Gear operator 180 790 - 10” 914 1500 Gear operator 200 1500 - 12” 1041 1950 Gear operator 220 2000 Telephone +34 913 581 212 Fax +34 913 580 488 360 e-mail Web gral@saidi.es www.saidi.es ANSI ‘Y’ GLOBE VALVE CLASS 900 SW/BW PRESSURE SEAL DOUGLAS CHERO ‘Y’ GLOBE VALVE Series Y70xPS Class: 900 CARBON STEEL ‘Y’ GLOBE VALVE CLASS 900 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 900 p.s.i. at 850ºF | 2.220 p.s.i. at 100ºF Hydraulic (minimum): Body 3330 p.s.i. Seat 2442 p.s.i. Air under water: Seat 85 p.s.i. API 598, BS EN 12266 (Part 1) Construction based upon BS 1873 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards 1 Refer to Material list of construction SERIES Y70xPS - ‘Y’ GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 900 SW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 3” 350 450 350 78 90 - 4” 400 510 350 102 120 - 6” 500 630 Gear operator 154 430 - 8” 625 825 Gear operator 202 750 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 361 GLOBEVALVES ‘Y’ GLOBE VALVE CLASS 1500 SW/BW PRESSURE SEAL DOUGLAS CHERO ‘Y’ GLOBE VALVE Series Y75xPS Class: 1500 CARBON STEEL ‘Y’ GLOBE VALVE CLASS 1500 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5557 p.s.i. Seat 4075 p.s.i. Air under water: Seat 85 p.s.i. API 598, BS EN 12266 (Part 1) Construction based upon BS 1873 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards Refer to Material list of construction 1 SERIES Y75xPS - ‘Y’ GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 1500 SW PRESSURE SEAL Article Number 362 DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 3” 350 450 350 78 90 - 4” 400 510 500 102 170 - 6” 500 630 Gear operator 154 430 - 8” 625 825 Gear operator 202 750 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es ANSI ‘Y’ GLOBE VALVE CLASS 2500 SW/BW PRESSURE SEAL DOUGLAS CHERO ‘Y’ GLOBE VALVE Y115xPS Class: 2500 CARBON STEEL ‘Y’ GLOBE VALVE CLASS 2500 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9255 p.s.i. Seat 6787 p.s.i. Air under water: Seat 85 p.s.i. API 598, BS EN 12266 (Part 1) Construction based upon BS 1873 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards 1 Refer to Material list of construction SERIES Y115xPS - ‘Y’ GLOBE VALVE A105/F6 TRIM No. 1 - CLASS 2500 SW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) VI (mm) Pf (mm) Weight (kg) - 3” 350 450 350 78 95 - 4” 400 510 Gear operator 102 170 - 6” 500 630 Gear operator 154 430 - 8” 625 825 Gear operator 202 790 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 363 CHECKVALVES SWING CHECK VALVE CLASS 1500 SW/BW PRESSURE SEAL DOUGLAS CHERO SWING CHECK VALVE 85xPS Class: 1500 CARBON STEEL SWING CHECK VALVE CLASS 1500 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5575 p.s.i. Seat 4100 p.s.i. Air under water: Seat 85 p.s.i. ASME B16.34 Construction based upon ASME B16.34 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards Refer to Material list of construction 1 SERIES 85xPS - SWING CHECK VALVE A105/F6 TRIM No. 1 - CLASS 1500 BW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) Pf (mm) 1/2” 110 86 11,5 2,9 - 3/4” 115 100 15 4,2 - 1” 130 110 19,5 5,4 - 1.1/4” - 1.1/2” 210 153 32 17,7 - 2” 240 170 40 22 Telephone +34 913 581 212 Fax +34 913 580 488 364 Weight (kg) - e-mail Web gral@saidi.es www.saidi.es ANSI SWING CHECK VALVE CLASS 2500 SW/BW PRESSURE SEAL DOUGLAS CHERO SWING CHECK VALVE 215xPS Class: 2500 CARBON STEEL SWING CHECK VALVE CLASS 2500 SW/BW Specifications Material Pressure Rating Tests Design Standards 1 Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9275 p.s.i. Seat 6800 p.s.i. Air under water: Seat 85 p.s.i. ASME B16.34 Construction based upon ASME B16.34 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Refer to Material list of construction SERIES 215xPS - SWING CHECK VALVE A105/F6 TRIM No. 1 - CLASS 2500 BW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) Pf (mm) Weight (kg) - 1/2” 110 90 10,0 2,9 - 3/4” 115 100 14 4,2 - 1” 130 124 18,0 5,4 - 1.1/4” - 1.1/2” 210 164 31 17,7 - 2” 240 170 36,5 22,0 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 365 CHECKVALVES SWING CHECK VALVE CLASS 900 SW/BW PRESSURE SEAL DOUGLAS CHERO SWING CHECK VALVE 80xPS Class: 900 CARBON STEEL SWING CHECK VALVE CLASS 900 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 900 p.s.i. at 850ºF | 2220 p.s.i. at 100ºF Hydraulic (minimum): Body 3330 p.s.i. Seat 2442 p.s.i. Air under water: Seat 85 p.s.i. BS 1873 Construction based upon BS 1873 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards Refer to Material list of construction 1 SERIES 80xPS - SWING CHECK VALVE A105/F6 TRIM No. 1 - CLASS 900 BW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) Pf (mm) 3” 305 220 72 70 - 4” 356 323 98 110 - 6” 508 400 146 250 - 8” 660 450 190 500 - 10” 787 505 210 880 - 12” 864 590 245 1620 Telephone +34 913 581 212 Fax +34 913 580 488 366 Weight (kg) - e-mail Web gral@saidi.es www.saidi.es ANSI SWING CHECK VALVE CLASS 1500 SW/BW PRESSURE SEAL DOUGLAS CHERO SWING CHECK VALVE 85xPS Class: 1500 CARBON STEEL SWING CHECK VALVE CLASS 1500 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 1500 p.s.i. at 850ºF | 3705 p.s.i. at 100ºF Hydraulic (minimum): Body 5575 p.s.i. Seat 4100 p.s.i. Air under water: Seat 85 p.s.i. API598, BS EN 12266 (Part 1) Construction based upon BS 1873 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards 1 Refer to Material list of construction SERIES 85xPS - SWING CHECK VALVE A105/F6 TRIM No. 1 - CLASS 1500 BW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) Pf (mm) Weight (kg) - 3” 305 220 72 70 - 4” 406 323 98 110 - 6” 559 400 146 250 - 8” 711 450 190 500 - 10” 864 505 210 880 - 12” 864 590 245 1620 Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 367 CHECKVALVES SWING CHECK VALVE CLASS 2500 SW/BW PRESSURE SEAL DOUGLAS CHERO SWING CHECK VALVE 215xPS Class: 2500 CARBON STEEL SWING CHECK VALVE CLASS 2500 SW/BW Specifications Material Pressure Rating Tests Carbon steel ASTM A1051 2500 p.s.i. at 850ºF | 6170 p.s.i. at 100ºF Hydraulic (minimum): Body 9255 p.s.i. Seat 6787 p.s.i. Air under water: Seat 85 p.s.i. API 598, BS EN 12266 (Part 1) Construction based upon BS 1873 Socket Weld ASME B16.11 Butt Weld ASME B16.25 Design Standards Refer to Material list of construction 1 SERIES 215xPS - SWING CHECK VALVE A105/F6 TRIM No. 1 - CLASS 2500 BW PRESSURE SEAL Article Number DN Ff (mm) Ha (mm) Pf (mm) 3” 368 276 57 90 - 4” 457 290 75 120 - 6” 610 380 110 300 - 8” 762 486 147 700 - 10” 864 500 185 850 - 12” 864 600 218 1300 Telephone +34 913 581 212 Fax +34 913 580 488 368 Weight (kg) - e-mail Web gral@saidi.es www.saidi.es ANSI DETAILS OF THE FORGED STEEL PRESSURE SEAL CONSTRUCTION Wedge We have designed a new tee-head connection of the wedge. The wedge is now closed around the stem. Flexible split wedge is standard on our Forged Valves. During the stroke, the contact area between wedge and seat ring is wide. Standard Flexible Upon request Seat rings are welded in Bonnet Advanced Pressure Seal design is such that the bonnet is easy to be dismantled. The segment ring is kept in the right position by the safety ring. High tightness is achieved with pure graphite gasket ring, with a F316 jacket on both sides. Packing The new design of packing ensures high tightness with pure graphite pressed rings with two braided graphite ring on top and bottom. The new design of pure graphite packing also allows vacuum service and protection against fugitive emissions. Telephone +34 913 581 212 Fax +34 913 580 488 e-mail Web gral@saidi.es www.saidi.es 369
Similar documents
Prizer-Painter Factory Workers In Reading, Pennsylvania
Add a special layer of high-performance, commercial quality to your home
kitchen with a BlueStar Salamander Broiler. The four-position, adjustable
grilling rack delivers perfect results, from “Pitt...
