Uni-Channel Systems

Transcription

Uni-Channel Systems

C- Channel &
Metal fraMing SYSteMS
Uni-Channel Systems
8
8
15
9/21
SA0
Specialized factory for Steel Products
Sigma factory for Steel Products
for Building & Construction Materials
2
Specialized Factory for Steel Products
Sigma Factory, for Steel Products
SFSP Metal Framing system provides an
economical solution for electrical, mechanical
and industrial supports with a wide variety of
applications in the construction industry.
Z
Z
Y
Metal Framing / Electrical Applications
• Pipe & conduit supports
• Tunnel pipe stanchions
• Beam attachments
• Pipe risers
Y
Y
Metal Framing / Industrial Applications
• Racks and shelvings
• Production line supports
• Trolley systems
Z
• Wall framings
Y
Z
Z
Z
Z
Z
Z
Materials
Z
SFSP’s metal framing channel manufactured from:
Y
Y A569 or ASTM A570)
- Hot rolled steel S235JR as per EN 10025 / ASTM A-1011 CS Type B (formerly ASTM
Z
Y
Y
- Cold rolled steel DC01 as per EN 10130 / ASTM A1008 CS Type B (formerly ASTM A-366) and then:
21.0 Y
Hot- dip galvanized as per BS EN 1461 (formerly BS 729) / ASTM A123 or
Electro plated as per EN 12329 / ASTM B633 (Electrodeposited coatings of zinc on iron and steel) Z
Z
Z
- Pre-galvanized steel DX51 D+Z as per EN 10346 (G180 and G275 is available upon special request)
ZZ
41.0
which supersedes EN 10327 which is a replacement of EN 10142 which in turn supersedes BS 2989 /
ASTM A653M zinc coated (hot-dip galvanized) iron and steel CS (commercial) or SS (structural) quality
G60 and G90 is available upon special request (formerly ASTM A527M) / ASTM A924 (coating)
(formerly A525)
Z
- Stainless steel 1.4301 as per EN 10088-2 (formerly BS 1449 Part 2 / ASTM A240M, GradeZAISI 22.0
304)
21.0 Y
Lengths
Z
Z
21.0 Y
21.0 Y
21.0 Y21.0
Standard length: 3000mm with ± 3.2mm length tolerance.
Custom lengths are available upon request.
Y
Y
Y
Y
Y
Y
Z
Z
Z
41.0
Z
Z
Z
7.0
Y
41.0
41.0
41.0
Y
Y
41.0
22.0
Z
Y
Y
Y
Y
Y
7.0
Y
41.0
Z
Z
41.0Z
41.0
41.0
Z
41.0
41.0
22.0
22.0
Part No
Channel Dimensions
22.0
22.0
Thickness
Width “W”
CCH - 220/221
21.0 mm
41.0 mm
1.5 mm
CCH - 240/241
41.0 mm
41.0 mm
1.5 mm
CCH - 320/321
21.0 mm
41.0 mm
2.0 mm
CCH - 340/341
41.0 mm
41.0 mm
2.0 mm
CCH - 420/421
21.0 mm
41.0 mm
2.5 mm
CCH - 440/441
41.0 mm
41.0 mm
2.5 mm
2
7.0
21.0
42.0
41.0
41.0
41.0
22.0
7.0
41.0
82.0
22.0
22.0
22.0
7.0
22.0
41.0
7.0
7.0
41.0
22.0
7.0
22.0
7.0
7.0
7.0
7.0
42.0
42.0
82.0
82.0
82.0
41.0
41.0
41.0
Channel Patterns
0 - PT
1 - ST
2 - B2B
41.0
82.0
41.0
13
50
30
41.0
41.0
41.0
13
1
50 3
41.0
13
50
50
50
13
30
30
7.0
41.0
41.0
22.0
22.0
22.0
7.0
7.0
41.0
41.0
0
Size
2 - 21/41 mm
4 - 41/41 mm
7.0
7.0
41.0
42.0
42.0
3
22.0 7.0
41.0
41.0
22.0
22.0
7.0
22.0
21.0
21.0
21.0
Height “H”
Uni - Channel SyStemS
Y
Y
41.0
Z
Z
Z
41.0
Z
Z
41.0 Z
41.0
41.0
41.0
Selection Chart
Material Thickness
2 for 1.5 mm
3 for 2.0 mm
4 for 2.5 mm
Y
Y
Y
Y
Y
Y
Y
Z
Y
Y
Y
METAL FRAMING CHANNELS
CCH 320
Z
Z
30
30
SFSP
7.0
3
ChannelS
CHANNEL HOLE PATTERNS
Pt Plain type
St Slotted type
PT Type Channel
Part No
B2B type
ST Type Channel
B2B Type Channel
Thick.
mm.
Height “H”
Part No
Thick.
mm.
Height “H”
Part No
Thick.
mm.
Height “H”
CCH-220
1.5
21.0
CCH-221
1.5
21.0
CCH-222
1.5
42.0
CCH-240
1.5
41.0
CCH-241
1.5
41.0
CCH-242
1.5
82.0
CCH-320
2.0
21.0
CCH-321
2.0
21.0
CCH-322
2.0
42.0
CCH-340
2.0
41.0
CCH-341
2.0
41.0
CCH-342
2.0
82.0
CCH-420
2.5
21.0
CCH-421
2.5
21.0
CCH-422
2.5
42.0
CCH-440
2.5
41.0
CCH-441
2.5
41.0
CCH-442
2.5
82.0
TOOTHED CHANNEL
C C H - 3 2 0 T/ 3 2 1 T
C C H - 3 4 0 T/ 3 4 1 T
C C H - 4 2 0 T/ 4 2 1 T
C C H - 4 4 0 T/ 4 4 1 T
(41x21x2.0)
(41x41x2.0)
(41x21x2.5)
(41x41x2.5)
CCH - 320T
Thickness : 2.0 mm or 2.5mm
Standard Length : 3.00 m
Finishes: Pre-Galvanized, Hot-Dip
Galvanized.
CCH - 340T
CANTILEvER ARM BRACkETS - SCA
CCH421 41x21x2.5
CCH - 321T
CCH - 322T
CCH - 341T
CCH - 342T
CANTILEvER ARM BRACkET B2B - SCA
CCH422 41x21x2.5 B2B
Base plate :
Base plate :
height (h) x width (b) x thickness (t)
120
50
8
CCH441 41x41x2.5
CCH442 41x41x2.5 B2B
Base plate :
140
50
10
SFSP
140
50
10
Base plate :
180
60
12
4
FITTINGS
U Bracket
Flat
Square Plate
2 Holes Plate
3 Holes Plate
U Bracket Top Hat
U Bracket
Specify Hole Size
41
M6, M8, M10, M12
41
41
SFT 110
4 Holes Plate
41
138
SFT 115
47
SFT 615
Angular
90
90
184
SFT 130
SFT 135
Tee Bracket
90
47
41
L Bracket
232
SFT 125
43 for C41
82 for B2B
SFT 610
SFT 120
5 Holes Plate
43
23
88
L Bracket
Specify 41 or 82
54
Flat Bracket
Angle Bracket
Angle Bracket Specify 30° or
Specify 30° or 45°
or 60°
S
45° or 60°
90
S
h
138
h
SFT 510
SFT 515
138
136
138
Wings
41
SFT 140
SFT 145
SFT 150
90° Angle Tee Left Hand
Flat Bracket
90° Angle Tee
51
3 Holes Swing
90
90
138
SFT 310
SFT 155
SFT 315
SFT 160
Channel Tee Bracket
90˚ Degree
47
47
90° L Bracket
90° L Bracket
90° Long Bracket
98
41
41
57
SFT 320
104
41
104
SFT 210
SFT 215
90° Bracket
90° Bracket
40
43
Post Base
SFT 220
90° Delta Bracket Large
Base Plate with
Single Fix
Base Plate with
Double Fix
42
47
104
104
SFT 230
SFT 225
90° Delta Bracket Small
60
98
138
SFT 235
100
41
SFT 345
SFT 340
Base Plate with Double Channel
89
47
SFT 240
47
100
SFT 350
120
65
60
200
100
136
Base Plate with Double Channel
Double Fix
100 100
100
SFT 355
200
60
200
SFSP
SUPPORT SySTEMS
5
200
140
100
70
200
140
13x30
5
100
70
13x30
5
25
25
13x30
13x30
80
42
42
U - Support
I - Support
200
140
200
140
100
200
140
70
13x30
5
100
100
25
25
25
13x30
13x30
13x30
13x30
42
5
13x30
5
13x30
5
70
70
70
13x30
5
100
80
200
140
100
13x30
Clamping angles
200
140
70
25
42
80
80
42
80
80
42
25
13x30
Wall Bracket
42
200
140
Head
200
140
Plate
80
Angles
100
100
100
70
70
13x30
5
13x30
5
Support clamps
200
140
70
13x30
5
25
25
25
13x30
13x30
13x30
42
42
for U-Support
80
42
80
for i-Support
Support connectors
SFSP
80
Clamping plates
Support plates
1000
17,3
M 10 x 30
9021
D
M 12
M 10 x 45
9021
ple : TR - ZP - M 12 × 1000
MM
10 16
x 60
M 10 x 30
17
S
ACCESSORIES
M 12 x 25
Zinc Plated
M 12 x 25
Thread - ZP
M 12 x 30
M 12 x 40
M 12 x 40 M 6
M 12 x 50
M 8
M 12 x 60
M 12 x 60 M 10
1000
cap.
[mm]
25
25
30
30
6,4
6,4
9,3
9,3
26/32
2226/32
40
40
50
50
17,3
17,3
27,0
27,0
13/16
13/16
16/20
7021/25
21/25
25
SS
[mm]
50[mm]
90
2
6,4
6,4
9,3
9,3
22
22
50
50
17,3
17,3
M 6 x 12
M d
6 x 25
d
M 8 x 25
aa
bbM 8 x 40
19
18
M 12 x 60
M 12 x 30
M 12 x 80
M 8 x 25
M 12 x 30
M 12 x 40
60
M 16 x 60
90
M 16 x 90
M 8 x 40
M 10 x 20
M24
10 x 3024
M 12 x 60
M 12 x 60
M 12 x 80
M 12 x 80
M 10 x 45
M 12 x 90
M 16 x 60
M 16 x 90
50
50
12
12
60
60
60
60
15
15
75
Tolerance: Metric
6 Plated
H acc. Stainless
DIN
13-20.
M 12thread
x 25 Zinc
M 12
xSteel
25 S/m
M 12 x 30
S/m
Thread - ZP
MS/m
12 x 40 e
Thread
DIN
[mm]
e
S/m
ISO
[mm] [mm]
M 6
10/ 5
10/ 6
M 12 x 30
M 6
M 12 x 40
[mm]
[mm] M
12 x 60[mm]M 16
d
D
M 12
(mm)
(mm)
6x50
6x50
55M 16
8x60
8x60
10
10
10x80
10x80
20
20
12x90
12x90
25
25
10
10
Pull
Shear
Out
Out
M
16 x 90
9.6
10.3 9.6
10.3
M 10
10
M
45
45
27.8
17.1 27.8
17.1
M 12
12
M
75
75
40.5
25.3 40.5
25.3
5
Zinc Plated
Thread - ZP
88
9.5
9.5
8.4
8.4
14
14
15.4
15.4
19
19
24.4
24.4
Shear
e
[mm]
e
S/m
ISO
[mm] [mm]
S/m
M 6
M 6
10/ 5
10/ 6
11,5
M 8
M 8
13/6,5 13/7,5
15,0
M 10
M 10
17/ 8 16/ 9,5
19,6
M 12
M 12
19/10
18/12
21,9
S
1) Insert the spring nut anywhere along the continuous slotted channel. The rounded nut ends permit easy insertion.
2) A 90° clockwise turn aligns
edges 24/15,5
of the channel.
The need for drilling holes is
24/13
M 16the grooves in the nut
M with
16 the inturned
27,7
eliminated.
3) Insert the bolt through the fitting and into the springnut. (See illustration 5 for end view showing the nut in place)
4) Additional channel sections can now be bolted to the fitting already in place by following procedure described in steps 1–3.
5) Tightening with a wrench locks the serrated teeth of the nut into the inturned edges of the channel, to complete a strong,
vise-like connection.
Throught Anchor
M 8
1000
4,0
M 10
1000
6,4
1,6
M6,4
8
6,6Zinc2Plated
8,4
1,6
M 102
8,4
DimensionZP
M 8
Stainless Steel
M 10
Dimension
10,5
M
122,5 x 12 2
13,5 M 6
4
13
M
M13
1263 x 25 2,5
DIN
440
bolt
1000for17,3
[mm] [mm]
10,5
d
D
9021
s
9021
440
d
9021
[mm] [mm]
[mm
D
9021
22
6,6
2
24
S
8,4
2
45
13,5
4
13
3
S
DIN
30 EN10,5
[mm] [mm]
10
37
M 12
M 10 x 45
d
s x 60
11,5M 10
10
15,0M 10 x 70
[mm] [mm]
10
2,5
17
3
16
13
g
A
A
13
M 12 x 25
M 12 xSteel
30
Stainless
M 12 x 40
for bolt
12xx30
40
13 MM10
2,5
for bolt
- ZP
30
17 M 312 x 50
M 10 x 45
17
M 12 x 60
16
M 12 x 60
d
D
19
18
[mm] [mm]
s
12
6,4
1,6
M 8
16
8,4
1,6
M 10
M 16 x 60
MM10
16 x 60
24
21
24
10,5
2
M 12 x 40
M 12
16xx40
90
MM12
MM12
16 x 90
24
13
2,5
M 12 x 50
M 16Example : HB - ZP M
Order
- M16
12 × 1000
30
17
3
M 12 x 30
M 16 x 40
M 12 x 30
19
18
M 12 x 60
A
[mm]
M 8M 12 x 90
16xx25
40
MM12
A
H
Hexagonal Rod Coupler with view hole
M (SHR)
6M 12 x 80
MM 12
6 x 80
M 12 x 25
fv
fv
D
10
M
g
d
[mm]
M 12 x 30
24
Order Example:
WA - ZP - M 12 - DIN 125
M 12 x 80
M 16 x 40
M 16 x 40
M 16 x 60
Zinc
M 16Plated
x 60
Thread
M 16 x -90ZP
Nut with Long Springe
11,5
Pull
Out
Out
Stainless Steel
DIN
Thread
2,2
24
24
[mm]
e
S/m
ISO
[mm] [mm]
M 6
10/ 5
10/ 6
11,5
M 8
M 8
13/6,5 13/7,5
15,0
M 10
M 10
17/ 8 16/ 9,5
19,6
18/12
21,9
S/m
Stainless Steel
DIN
Thread
Order Example : HB - ZP - M M
12 6× 1000
its is
is advisable
advisable to
to apply
apply safty
safty factor
factor in
in consideration
consideration of
of the
the various
various
its
ways of
of employment
employment
ways
4
1000
Hammer Head
Bolt
19/10
M 12
M 12
M 16
Material
& Finishes
Codes Steel S/m
Zinc
Plated
Stainless
DIN
=
h.d.
galvanised,
strength
grade
fv
Thread - ZP
Thread 4.6
M 16 e
S/m
ISO
[mm] [mm]
M 6 grade 8.810/ 5
fv 8.8M =6h.d. galvanised ,strength
electroplated, strength
grade 4.6
gv &= Finishes
Material
Codes
Max Torque
(mm)
(mm)
38
38
18
M 6
M 12 x 90
16
24/15,5 27,7
M 88 : HB - 25
17.5
12.2
25 - M
19
M
12.2
Order Example
ZP
1217.5
× 1000 19
12
12
m
Max Torque
(mm)
(mm)
M 16 x 9027,7
24/13 24/15,5
M 66
M
17,3
21
10,5
2
Zinc
Plated
24/13 24/15,5
27,7
M 10
12 x 30
M
M 12 x 80
22
M 10
S max
max
S
fixing
fixing
13/7,5
M 12 x 22
M
126x 8011,5
M 12 x 80
10/
2
3
M
12
x
90
13/6,5 13/7,5 Pull-out
15,0 values
(1KN=100kg)
Pull-out
values in
in KN
KN -concrete
-concrete R
R 250kg/cm
250kg/cm
(1KN=100kg)
M
16
x
40
M
16
x
40
Yellow zinc
zinc plated
plated
Stainless Steel
17/ 8 16/ 9,5 19,6 Yellow
Stainless
24Steel 24
Type
Steel Thread
Thread (Zn)
(Zn)
Type
Steel
Thread
Thread
16 x 60
16
x
60
19/10 M
18/12
21,9 Max Torque M
Pull
Shear
Max Torque Pull
Shear
M 8
M13/6,5
6 x 25
for
bolt
Hex Head Bolt (SHB)
10 x 70
DIN 933 or EN 24017 (withoutMnut)
10/ 5
1
Screw
crew
Length
Length
MM12
16 x 60 24/13
1000
M 10 x 45
M 16
M 10
16 x 45
M
Order Example: WA - M
ZP10
- Mx 12
60 - DIN 125
75
13/6,5 13/7,5 19
M 8
M 8
15,0
18
Installation
&x 50Features
Stainless
Steel
90
17/ 8 16/ 9,5 19,6
M 10
M 10
12
DIN MISO
90
e
Thread
No Welding , No Drilling , No MSpecial
Tools,
and Adjustable.
19/10 Fast,
12
M 12 Strong,
18/12 Economical
21,9
M 6
(mm)
(mm)
D
18
18
m
12
12
55
55
Length Load
M 16
M
M 10
10 x 20
M 12
13
Nut with Short Spring
(mm)
(mm)
(mm)
(mm)
10
10
M 16
M 10
M 16
10
Min.
Min.
12 x 22
Drill hole
hole
plated
steel and stainless steel 304 (A2),316 (A4).
Material: Zinc M
Drill
45
45
ed
74
74
ZP
Md16
17
M 10 x 60Order Example : HB - ZP - M 12 × 1000
12,9
M 12
M 8
24
M 16 x 90
1000
M17/
8 x825 16/ 9,5 19,6
MM 812x x2522
12
6,4
M 6
1,6
12 x 25
M
8 x 40 18/12
21,9M1,6
16
8,4
M19/10
8
M
S
mm)
mm)
24
M 10 x 45
M 16 x 60
45
24
37
M 16 x 90
M 10M 16
x 30
x 40
M 16 x 40
S
Drill
Drill
M 12
13
18
19
30
21
512 10/D 6
M10/
6 xSteel
Stainless
M 12 x 60
M 8M x1225
x 40
M 12 x 50
ple : HB - ZP - M 12
× 1000
Nut
withoutMSpring
10 x 70
LL
40 x 40 x 5
M 10
6
10
M 12 x 25
M 16 x 40
M 10
M 10 x 70
M 12 x 25
40
M 8
S
EN
[mm] [mm]
M 6 x 25
M 12
ZincDIN
PlatedISO Stainless Steel
ENx 30
DIN M 10
M 10 x 30
Thread
HexHead
Bolts
DimensionZP
Dimension
[mm]
[mm] [mm]
Hexagonal [mm]
Rod Coupler
[mm]
Zinc Plated
8
for boltM- ZP
S
M 12 x 22
6,4
M 12
M 16
40 xx 40
40 xx 55
40
40 xx 40
40 xx 55
40
40 xx 40
40 xx 66
M 66
M1066 10
40
M
M
40 xx 40
40 xx 66
M 10
10
M 10
10
40
M
M
M 8 x 25
Hexagon
934 or
13ISO 4032
40 xx 40
40 xx 66
M 12
12 nut (SHN) DIN
M13
12
40
(=MDIN
EN 24032) M 12
M 10 x 60
9021
aa xx bb xx dd
e 40 x 40 x 5
b
S
S16
M Stainless
16
M 16
Steel M
16Zinc Plated M 16
EN
DIN
Dimension- ZP
Dimension
[mm] [mm]
M 6 x 12
Channel Nuts
[mm] [kN]
[kN]
[mm]
40
40
40
40
b
M 10
10
M
M 12
12
M
22
16
24
- ZP
DIN EN Thread
Machine
DIN
933, DINM24017
[mm]
[mm]
M 6
6
x 20
Zinc Plated MM 10
Stainless
Steel
10 x 30
M 10 x 30
DIN
SW 41/41
41/41 -- HDG
HDG -- M
M 12
12
Order Example:
Example: SW
Order
M 10 x 45
M 10 x 45
Dimension- ZP
Dimension
17
16
M 12 x 30
13
13
17
17
aa
SSW 41/41
for all channels
41/41 Series
Load
Load
cap.
cap.
M 12 x 40
LL
17
M 10
10
M
M 12
12
M
1000
D M 16 M 16
50
17 M 8
3 x 25
M 8 x 25
30
17
3
13
50 13 17
16
M 16
Order Example: WA - ZP9021
- M 12 - DIN 9021 M M
8 x 40
e
S/m
S/m
Coupler
Order
WASleeves
-SZP -(SCS)
Washers
(SRW)
440,DIN
9021
Order
Example:
WA -DIN
ZP
- M 12
- DIN
125Example:
M 10 x 20
Zinc Plated
SM 12 - DIN 9021
Stainless
Steel
M 16
H.D. Hexagon
Galvanised Nuts
Stainless
Steel
H.D.
Galvanised
DINSteel
934,
Stainless
for Bolts
Bolts
HDG
for Bolts
Bolts
for
-- HDG
for
24032
dd
S
el
40
l
80
M 10 x41/21
45 Series
M 12 x 25
30
60
M 10 xSSW
30 40/40
for all channels
D
[mm]
12
S
6016/20
12/14
4512/14
13
M 10
for boltM 16
- ZP
m
2,2
2,2
4,0
4,0
D
4,0
M 10
[mm]
10/ 6
11,5
fv
strength
8.8
M =8electroplated,
Mstrength
8grade 8.8 13/6,5
=gv h.d.
galvanised,
grade13/7,5
4.6
15,0
e gv
=A4-70
electroplated,
strength
grade
4.6
19/10 18/12
M =12Stainless steel grade
MA4-70
12
17/ 8 16/ 9,5
19,6
A4-50
M =10Stainless steel grade
MA4-50
10
A2-50 = Stainless steel grade A2-50
24/13
M 16galvanised M,strength
16
h.d.
grade24/15,5
8.8
fv 8.8 =A2-70
= Stainless steel grade A2-70
24/13 24/15,5 27,7
21,9
27,7
S
15
15
20
20
17,3
1000
2,2
1000
Steel
dM 12
DZinc Plated
s Stainless
1000
12,9
S
3010/10
10/10
[kN]
[mm] [kN]
[mm]
1000
M 6
DIN
m
20[mm]
[mm]
6,4
d1000
1000
12,9
S
40
ll
13
Square Washers SSW
Load
Load
cap.
cap.
LL
D
D
1000
4,0
1000
m
M 8 x 25
1000
M 6
9021
M 16 x 90440
M 6 M 16 x 90
M
8
M
8
6,4
9021
9021
M 8
M
8
Order Example : HB - ZP - M 12 × 1000
M 10 M 10 M 10
M 10 9021
12,9
440
440
M 12
d
d
M
12 9021
M 12 M 12 M9021
12
17,3
2,2
1000
M 8
Stainless Steel
cap.
OrderThread
Example : TR -[mm]
ZP - M[kN]
12 × 1000
19
[kN]
M 6
Washers
[mm]
[mm]
Order
: TRD - ZP d-[mm]
M
12s × 1000
Coupler
Sleeves Rounded
MDIN
16
xStainless
40 Example
Zinc Plated
440Steel 24
M 6
24
9021
M440,DIN
16 x 60
for bolt - M
ZP16 x 60for bolt
4,0
Washers (SRW) DIN 125
Threaded Rod (STR) DIN 975
25
1000
MRound
16 x 40
2,2
[kN]
1000
M 12 x 80Steel
Stainless
M 16
for bolt DIN
S
M 8
M 8
S M6
S
M 6
ated
Stainless Steel
M 10 EN M 8
M 10
M 8
DIN
M 10
M 10
n- ZP
Dimension
M
12
M
12
[mm] [mm] M 12
M 12
SORI ES
M 16
M 16
M 16
M 16
12
leeve Anchor
Anchor ,Throught
,Throught Anchor
Anchor .......
....... 10
leeve
10 Example : TR - ZP - M 12 × 1000
Order
25
Order Example : TR - ZP - M 12 × 1000
M 12
S
Round Washers
DIN 125
Length Load
Stainless
M 6 Steel
Thread
S
Fully Threaded Rods Grade
Zinc Plated
M 6
4.6 DIN 975
Thread - ZP
Plated
Nuts, Washers cap. Zinc
M 12
x 80
[mm] [kN] for bolt
M 12 x 90
- ZP
S
Threaded Rods, Hexagon Thread
Head Bol ts,
Thread
- ZP
Load
[mm]
M 8
50 Head17Bol ts, 3Nuts, Washers
16 Hexagon
ThreadedMRods,
Threaded Rods, Hexagon Head Bol ts, Nuts, Washers M 12 x 30
Threaded Rods, Hexagon Head Bolts, Hexagon Nuts, Washers
16
cap.
Thread
Thread
13,5 - ZP 4
MESSORI
6
13
M
12 SY STEM37S ACC
3 ES
FR AMI
NG
M 10 x 45
M 12 x 22
Length
FRAMING SySTEM
ACCESSORIES
FR AMI
NG
SY STEM
S ACC ESSORI
Stainless
Steel ES
Zinc
Plated
45
M 10
x 70
Order
Example:
WA - ZP - M 12 - DIN 9021
FR AMI NG SY STEM S ACC ESSORI ES
6
M 12
S
M 16
M 10 x 20
440
d
S
12,9
S
1000
S
M 12
= Stainless steel W1.4529
HCR-50 grade 8.8
strength
gv 8.8 =HCRelectroplated,
(
S. 53)
Hex-head bolt connects
fitting=toStainless
channel as itsteel
A4-70
is threaded into spring
nut. = Stainless steel
A2-50
grade A4-70
grade A2-50
Chamfer
in the nut eases
= Stainless
steel grade A2-70
A2-70
starting of the bolt. Nut
Stainless
a strong,steel W1.4529 HCR-50
HCRteeth=make
vise-like grip when
tightened against the
inturned channel edges.
Channel edges and the
nut’s tapered grooves
act as guides to provide
fool-proof alignment of
connection.
Nut teeth grip the
channel’s inturned edges,
tying the channel sides
together in a “box”
configuration for added
strength.
Spring allows precision
placement anywhere
along channel length,
then holds the nut
in position while
the connection is
completed.
(
S. 53)
Material & Finishes Codes
fv
= h.d. galvanised, strength grade
gv
= electroplated, strength grade 4
fv 8.8 = h.d. galvanised ,strength grade
gv 8.8 = electroplated, strength grade 8
HCR
= Stainless steel W1.4529 HCR-50
(
SFSP
S
M 20
20 - M 1226/32 50 27,0
Order example:
HRC M
- GV
s
a
Order example: CS - GV - M 16
L
Load
cap.
40
6,4
S
M 12
b
40 x 40 x 6
M 12
SW 41/41 - HDG - M 12
Order Example:
Electroplated Stainless Steel
Thread - GV
Thread
[mm] [mm] [kN]
L
M 10
s
EXPANSION STEEL
ANCHOR - STM
STM Expansion
Steel Anchor
Yellow zinc
M 12
plated
Steel
M 16 (Zn)
Thread
13
M 10
Stainless
M 12
Steel
M 16
Thread
L17
(mm)
22
50 17,3 (mm)
(mm)
6
Order M
example:
HRC -M
GV6 - M 12 45
10
55
M8
M8
50
12
60
M 10
M 10
60
15
75
74
18
90
M 12
typical applications:
Order example: STM - Zn - M 12
Cable trays, handrails, brackets,
Yellow zinc
Stainless
Min.
Drill
staircases,
ladders,Lmachines,
window
plated Steel
Steel
Drill hole
(mm)
Threadpanels,
(Zn)
Thread
base
plates,
scaffoldings
and
(mm)
(mm)
M
6
45
M
6
10
55
frameworks
.
Yellow zinc
Stainless Screw
S max
plated
M8
M 8 Steel
Steel
Materials:
Thread
(Zn)
Thread
M 10
M 10
M
M 612-
50
12
x Length
60 (mm)15
60
fixing
(mm)
75
zinc plated
5
M 6steel. 74 6x5018
90
8x60(A2) , SS10316 (A4) ].
M 8 - stainless steel
M 8 [ SS 304
STM/H
Order example: STM - Zn - M 12
M 10
DROP IN ANCHOR - SDA
M 10
M 12
STB
Pull
Shear
Out 34
10.360 9.6
Max Torque
8.8
(mm)
9.5
8.4
M8
25
12.2 17.5
19
14
15.4
38
19
24.4
17.1 27.8
75
25.3 40.5
10
10x80
20
SHIELD ANCHOR - SHA
2
Recommended loadsways
(non-concreted
C 20/25). Stainless Steel
Yellow
zinc plated
of employment
Type
Steel Thread (Zn)
Thread
Tension Max Torque
ShearPull
LoadShearBending
Moment
Max Torque
Pull
Shear
Threaded
(mm)
Out
(mm)
Load
(kN)
(Nm) Out
size
M(kN)
6
8.4
10.3 9.6
9.5
10
8
Uni-channel ,railings, steel constructions,
machines, high-racks, cable support
systems and mechanical fixations.
M8
25
M 3.2
10
45
12.2 17.5
19
1.9
3.8 14 15.4
17.1 27.8
38
2.3
9.4 19 24.4
2.8
16.3
M 4.9
12
25.3 40.5
75
7.3
5.3
32.7
its is advisable to apply safty factor in consideration of the various
75
ways9.8
of employment 8.4
M6
M8
M10
M12
M16
2.4
Technical Data:
Recommended loads (non-concreted C 20/25).
Bolt Size
Tension Load
(kN)
Shear Load
(kN)
Bending
Moment
(Nm)
M6
M8
M10
M12
2.56
3.33
4.1
6.66
2.0
3.3
5.0
7.5
5.0
12.5
25.5
.......
Anchor
Technical Data:
Uni - channel, hand rails, steel construction, Through bolt zinc plated (non-cracked C20/25).
cable trays, supports, bracket, ducts and
Tension Load
Shear Load
Bending MoBolt
Throught Anchor
(kN)
(kN)
ment
shelf feet.
Size
Materials:
- zinc plated steel.
- stainless steel [ SS 304 (A2) , SS 316 (A4) ].
For fixing : steel construction, handrail,
console, bracket, ladders, gate and
spacing design.
M6
M8
M10
M12
M16
2.1
4.0
5.5
7.5
13.0
3.0
4.8
8.5
9.5
16.0
5.5
13.0
26.5
46.5
118.5
Technical Data:
Recommended loads (concrete C 20/25 and in brick work).
Brick Work
Concrete
Torque
Torque
Tension
Size Tension Shear
Concrete
Brick
Shear
N.m
N.m
kN
kN
kN
M6
M8
M10
M12
Materials:
- zinc plated and die-cast.
3.3
4.8
6.2
9.7
2.1
4.4
6.1
12.4
1.6
2.1
2.6
3.9
6.5
15.0
27.0
50.0
5.0
7.5
13.0
23.0
V = Very suitable S = Somehow suitable
Expansion Steel Anchor
SFSP
Concrete
Hollow
Concrete Block
Grout Filled
Block
Soft Natural
Stone
Hard Natural
Stone
Immediate
Loading
S
S
v
v
S
v
v
v
S
S
v
Drop-In Anchor
v
Sleeve Anchor
v
Wedge Anchor
v
Pull
Out
Shear
(1KN=100kg)
Pull-out values in KN -concrete R 250kg/cm
Technical Data:
its is advisable to apply safty factor in consideration of the various
5
8x60
8.88
(Nm)
Sleeve Anchor
SHA
8.510
45
Materials:
- zinc plated steel.
- stainless steel [ SS 304 (A2) , Throught
SS 316 (A4) ].
Sleeve
Anchor
THROUGH BOLT
(WEDGE
ANCHOR) - STB
Max Torque
6.5
(mm)
4.7
6.9 M 6
M 12
25
zinc plated steel. 12x90
stainless
steel
[
SS
304
(A2)
,
SS 316 (A4) ].
Order example: STMH - Zn - M 12
SAS
M6
M8
M10
M12
M 10
M 12-
SLEEvE ANCHOR - SAS
Tension
Shear
Bending
Screw
Load
Load
Moment
Grade
(1KN=100kg)
Pull-out values in KN -concrete R 250kg/cm2
(kN)
(kN)
(Nm)
Yellow zinc plated
Stainless
Steel
2.5
2.3
3.9
8.8
Type
Steel Thread (Zn)
3.3
4.4
17
8.8 Thread
25
trays.
6x50
M 6 threaded rods,cable
M6
M 10Materials:M 10
Type
(order No)
20
M8
Recommended loads (non-concreted C 20/25).
12x90
Yellow -zinc
S max
Pipes,Stainless
ventilationScrew
ducts, suspended
plated Steel
x Length
Steel
fixing
sprinkler
systems,
brackets,
Threadceilings,
(Zn)
(mm)
Thread
(mm)
M8
Technical Data:
10x80
Order example: STMH - Zn - M 12
SDA
7
ANCHORS
Min.
Drill
40
9,3
Drill hole
S
S
v
v
www.unitech-ikk.com
www.unimetal-ikk.com
www.sfsp-ikk.com
KingDOM Of SaUDi araBia
UniteD araB eMirateS
leBanOn
Jeddah
Tel: +966 2 627 8222
Fax: +966 2 627 8722
unitech.ksa@ikkgroup.com
Qassim
Tel: +966 6 382 3946
Fax: +966 6 385 2186
Dubai - DiP
Tel : +971 4 884 7275
Fax: +971 4 884 7278
unitech.uae@ikkgroup.com
Beirut
Tel: +961 1 858 277
Fax: +961 1 858 276
unitech.lebanon@ikkgroup.com
Jeddah - ghurab Showroom
Tel: +966 2 667 2000
Fax: +966 2 661 4306
Qassim Showroom
Tel: +966 6 385 2598
Fax: +966 6 382 6684
Dubai - al rashidiyah
Tel: +971 4 285 6031
Fax: +971 4 286 2941
JOrDan
Mak kah, taif
Tel: +966 2 597 2675
Fax: +966 2 597 0588
tabuk
Tel: +966 4 424 3386
Fax: +966 4 423 5203
Sharjah
Tel: +971 6 534 4092
Fax: +971 6 534 8949
Mad inah
Tel: +966 4 864 9111
Fax: +966 4 864 9222
Skakah, Qurayyat
Tel: +966 4 626 3904
Fax: +966 4 626 3905
abu Dhabi - Musaffah
Tel: +971 2 551 2334
Fax: +971 2 551 2335
Yanbu
Tel: +966 4 390 1499
Fax: +966 4 322 7101
hail
Tel: +966 6 543 3931
Fax: +966 6 543 3935
egYPt
Khamis Mushayt
Tel: +966 7 237 5929
Fax: +966 7 237 8783
hafar al Batin
Tel: +966 3 721 5915
Fax: +966 3 721 5915
Baha
Tel: +966 7 237 5929
Fax: +966 7 237 8783
Dammam
Tel: +966 3 859 0097
Fax: +966 3 857 8177
najran
Tel: +966 7 321 4038
Fax: +966 7 321 4035
Dammam - Showroom
Tel: +966 3 834 9300
Fax: +966 3 834 9457
gizan
Tel: +966 7 321 6660
Fax: +966 7 321 0665
hufuf
Tel: +966 3 586 9732
Fax: +966 3 584 5966
riyadh
Tel: +966 1 454 9282
Fax: +966 1 456 6627
Jubail
Tel: +966 3 361 4390
Fax: +966 3 361 4499
riyadh - rail St.Office
Tel: +966 1 810 5926
Fax: +966 1 456 6627
DeSign OffiCe
germany
Stuttgart
Tel: +49 711 6868 7222
Fax: +49 711 6868 7223
unitech.germany@ikkgroup.com
amman
Tel: +962 6 556 3030
Fax: +962 6 554 7911
unitech.jordan@ikkgroup.com
liBYa
tripoli
Tel: +218 21 717 0264
Fax: +218 21 477 1612
unitech.libya@ikkgroup.com
OMan
Cairo
Tel: +20 2 3346 8566
Fax: +20 2 3346 8567
unitech.egypt@ikkgroup.com
Cairo - gamhouriyah St.
Tel: +20 2 2787 2152
Fax: +20 2 2593 1053
Cairo - tagammu al-Khamis
Tel: +20 2 2616 1650
Fax: +20 2 2616 1651
Muscat
Tel: + 968 24 591 006
Fax: + 968 24 597 006
unitech.oman@ikkgroup.com
KUWait
Kuwait City
Tel : +965 22 459 984
Fax: +965 22 459 985
unitech.kuwait@ikkgroup.com
YeMen
Sana’a
Tel: +967 1 473 542
Fax: +967 1 473 542
unitech.yemen@ikkgroup.com
Bahrain
SUDan
Manamah
Tel: +973 1 756 4386
Fax: +973 1 756 4315
unitech.bahrain@ikkgroup.com
Khartoum
Tel: +249 183 528 065
Fax: +249 183 248 065
unitech.sudan@ikkgroup.com
Qatar
UK
Doha
Tel: +974 4451 3301/2/3
Fax: +974 4451 3305
unitech.qatar@ikkgroup.com
Birmingham
Tel: +44 121 698 21 85
Fax: +44 121 698 21 47
unitech.uk@ikkgroup.com
SfSP / KingDOM Of SaUDi araBia
SfSP / egYPt
Specialized Factory for Steel Products - Jeddah
Tel: +966 2 637 4482
Fax: +966 2 636 1963
sfsp.jeddah@ikkgroup.com
Specialized Factory for Steel Products - 6th of October, Cairo
Tel: +20 2 3831 2477
Fax: +20 2 3831 1036
sfsp.cairo@ikkgroup.com
SfSP / UniteD araB eMirateS
SIGMA Factory for Steel Products - Ajman
Tel: +971 6 743 9907
Fax: +971 6 743 9908
sfsp.ajman@ikkgroup.com
SIGMA Factory for Steel Products - Umm Al Quwain
Tel: +971 6 767 0514
Fax: +971 6 767 0515
sfsp.uaq@ikkgroup.com

Uni-Channel Systems

Transcription

Similar documents

NSU TT Aw: NSU TT Aw: NSU TT Aw: NSU TT