north haven 3 person cushion garden swing

ITEM # 062501
NORTH HAVEN
3 PERSON CUSHION GARDEN SWING
MODEL # SC-J-100GS
Questions, problems, missing parts? Before returning
to your retailer, call our customer service department at
1-800-457-4652, 9 a.m. – 5 p.m., EST, Monday-Friday.
PACKAGE CONTENTS
Part
A
B
C
Top Frame Bar
Leg
Leg Decoration
Description
Quantity
1
4
2
D
Arm
2
E
Seat and Back
1
F
G
Long Hanging Bar (with ”long” label )
Short Hanging Bar (with ”short” label)
2
2
H
Canopy
1
I
Back Cushion
3
J
Seat Cushion
1
K
L
M
N
O
P
Q
R
S
Support Canopy Crossbar
2
4
8+1 spare
4
4
4
2
4
4
M6 x 20L Bolt
M6 x 25L Bolt
M6 x 65L Bolt
M6 x 85L Bolt
M8 x 45L Bolt
M8 x 50L Bolt
M8 x 90L Bolt
M8 x 105L Bolt
1
Diagram
T
M6 Metal Washer
16+1 spare
U
M8 Metal Washer
20+1 spare
V
W
8+1 spare
14+1 spare
X
M6 Nut
M8 Nut
M6 x 9L Plastic Washer
Y
M8x 18L Plastic Washer
8
Z
Support Triangle
2
AA
Double Hook
2
AB
2
21+1 spare
AD
Black Knob
M6 Bolt Cap
M6 Nut Cap
AE
M8 Bolt Cap
14+1 spare
AF
M8 Nut Cap
14+1 spare
AC
4
9+1 spare
WARNINGS AND CAUTIONS
Assemble on a soft, non-abrasive surface, such as carpeting, to avoid damage to the item.
Item is heavy. Use care when handling. May require two adults for safe assembly. Maximum weight is 600 lbs.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly: two Allen wrenches, hex wrench, hex nut wrench and touch up paint (provided)
ASSEMBLY INSTRUCTIONS
1) Attach top Frame bar (A) to four legs (B). Align the holes at the four legs (B) with the holes at the end of the top
frame bar (A). For each hole, insert an M8 x 105L Bolt (S) through an M8 metal washer (U), through one leg (B),
through the top frame bar (A), through the other leg (B), through another M8 metal washer (U) and secure with an
M8 nut (W). Don’t tighten completely. Then align the holes of one leg decoration (C) with the holes in two legs (B)
by angling the leg decoration (C). For each hole, insert an M6 x 25L bolt (M) through the leg decoration (C) and
secure into one leg (B). Repeat procedure for another leg decoration (C). See Fig.1.
2) Align the holes of one support triangle (Z) with the holes at the two legs (B). NOTE: Make sure the side of the
2
support triangle with the “Inside” sticker faces inside. Insert an M8 x 50L bolt (Q) through the support triangle (Z),
through the top frame bar (A), through the support triangle (Z) again and secure with an M8 nut (W). Don’t tighten
completely. Attach two lower ends of the support triangle (Z) to each of two legs by inserting an M8 x 45L bolt (P)
through an M8 metal washer (U), through one leg (B), through the support triangle (Z) and secure with an M8 nut
(W). Don’t tighten completely. Repeat procedure for the remaining support triangle. Securely tighten all the bolts
from steps 1 and 2. See Fig.2.
3) Attach one arm (D) to the seat and back (E).
From outside insert an M8 x 90L bolt (R) through
an M8 metal washer (U), through the bottom hole
of the arm (D), through an M8 x 18L plastic
washer (Y), through the seat hole at the seat and
back (E), through an M8 metal washer (U) and
secure with an M8 nut (W). Don’t tighten
completely. Then from outside insert an M6 x 85L
bolt (O) through an M6 metal washer (T), through
the top hole of the arm (D), through an M8 x 18L
plastic washer (Y), through the back hole at the
seat and back (E), through an M6 metal washer
(T) and secure with an M6 nut (V). Don’t tighten
completely. Repeat procedure for another arm
(D). See Fig.3.
4) Place a long hanging bar (F) and a short hanging
bar (G) on each double hook (AA). Attach a short hanging bar (G) to the front of the seat assembly by inserting an
M6 x 65L bolt (N) (from inside to outside) through the sleeve in the front of the arm, through an M6 x 9L plastic
washer (X), through the short hanging bar (G), through an M6 metal washer (T) and secure with an M6 nut (V).
Don’t tighten completely. Repeat procedure for the other short hanging bar (G) and two long hanging bars (F).
Now go back and tighten all nuts and bolts from steps 3 and 4. See Fig.4.
5) Then hang the entire seat assembly by the double hooks
through the hanging rings at the top frame bar (A). See
Fig.5.
6) Lift the canopy (H) on the top frame bar (A). Insert a black
knob (BB) through the canopy (H) and secure into the top
frame bar (A). Don’t tighten completely. Repeat procedure
for the other side. Then securely tighten the two knobs. See
Fig.6.
7) Attach one support canopy crossbar (K) to canopy (H) for
each hole by inserting an M6 x 20L bolt (L) through an M6
metal washer (T), through the bracket of the support
canopy crossbar (K) and secure into side canopy crossbar.
Don’t tighten completely. Repeat procedure for another
3
support canopy crossbar (K). Securely tighten all bolts. See Fig.7.
8) Make sure that all bolts and nuts are tightened. Cover all bolts with bolt caps (AC, AE) and cover all nuts with nut
caps (AD, AF). Then place the seat cushion (J) and back cushion (I) onto the seat and back (E) and attach with
hook-and-loop fasteners. The swing is now ready for use. See Fig.8.
CARE AND MAINTENANCE
Wash with mild soap, rinse with water, let air dry.
WARRANTY
This warranty is extended to the original purchaser and applies to defects in materials and workmanship of your patio
furniture provided your furniture is maintained with care and used only for personal, residential purposes.
Frames are warranted to be free from defects in material or workmanship for a period of one (1) year. Umbrella
frames and bases are warranted for a period of one (1) year.
Cushions, Straps and/or Wicker Weaves are covered for a period of one (1) year against defects in material or
workmanship. Sling fabric is covered for a period of one (1) year against defects in material or workmanship.
Exclusions: Items used for commercial, contract or other non-residential purposes; display models; items purchased
“as is;” or items damaged due to acts of nature, vandalism, misuse or improper assembly are not covered.
Discoloration or fading of the finish or fabrics as a result of exposure to the elements, chemicals or spills is not
covered. Tabletop breakage, corrosion or rusting of hardware and damages to frames or welds caused by improper
assembly, misuse or natural causes are not covered.
If within the stated warranty period a product is found to be defective in material or workmanship, the purchaser must
contact the manufacturer’s customer service department at 1-800-457-4652. The manufacturer, at its option, will
repair or replace the defective parts.
Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items will be in the
original style and color or a similar style and color if the original is unavailable or has been discontinued. As some
states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not
apply. This warranty gives you specific rights, and you may also have other rights which vary from state to state.
Printed in China
4