1/18TH SCALE READY-TO-RUN MINI

TM
1/18th scale ready-to-run mini-Rock Crawler
Owner’s Manual
Thank you for choosing the Mini-Rock Crawler from Losi. This guide contains the basic instructions for operating your new
Mini-Rock Crawler. While the Mini-Rock Crawler is great for first-time RC drivers, it does require some mechanical experience
and/or parental supervision for drivers under 14. It is critical that you read all of the instructions in order to operate your
model correctly and avoid unnecessary damage. Please take a moment to look over all the printed materials before operating
your new Mini-Rock Crawler.
GO REGISTER YOUR PRODUCT ONLINE
Losi, a division of Horizon Hobby, wants to ensure that you get maximum enjoyment from your 1/18 Mini-Rock Crawler.
We strongly encourage you to register your product using the online Product Registration tool so we can notify you when
there are updates, tech tips, new option parts, or service bulletins available for your product.
Log onto WWW.LOSI.COM to complete the Product Registration form.
Not responsible for errors. All prices subject to
change without notice.
Losi, a Division of Horizon Hobby, Inc.
Safety Precautions
This is a sophisticated radio controlled model that must be operated with caution and common sense. Failure to operate your
Mini-Rock Crawler in a safe and responsible manner could result in damage to the model and property. The Mini-Rock Crawler
is not intended for use by children without direct adult supervision. Losi and Horizon Hobby shall not be liable for any loss or
damages, whether direct, indirect, special, incidental, or consequential, arising from the use, misuse, or abuse of this product
or any product required to operate it.
• This model is controlled by a radio signal subject to interference from many sources outside your control. This interference
may cause momentary loss of control, so it is advisable to always keep some distance in all directions around your model
as a safety margin to avoid collisions.
• Always operate your model in an open area away from cars, traffic and people.
• Avoid running your model in the street where damage can occur.
• Never run your Mini-Rock Crawler with low transmitter batteries.
• Carefully follow the directions and warnings for this and any optional support equipment.
• Keep all chemicals, small parts and anything electrical out of the reach of children.
Tools and Items You Will Find Handy
•
•
•
•
Soft bristle brush for cleaning
5.5mm nut driver for the wheel nuts.
#0 or #1 Phillips screwdriver
.050-inch Allen Wrench (LOSA99100)
Note: Use only Losi tools or other high-quality tools. Use of
inexpensive tools can cause damage to the small screws and
parts used on this type of model.
The Radio System
The following is an overview of the various functions and adjustments found on the Mini-Rock Crawler radio system. Since
the Mini-Rock Crawler operates on a radio signal you control, it is important for you to read and understand about all of these
functions and adjustments before driving.
The Receiver
1.
2.
3.
4.
Throttle Port: Where the Electronic Speed Control (ESC) plugs in.
Steering Port: Where the steering servo(s) plugs in.
Bind Port: Used to “bind” the receiver to the transmitter.
Indicator Light: Shows that a frequency/channel is being received.
The Electronic Speed Controller (ESC)
1.
2.
3.
4.
On/Off Switch: Powers the receiver and ESC.
Setup Button and Indicator Light: Used for resetting the ESC.
Battery Lead: Connects to the battery pack for power.
Motor Lead: Connects to the wire leads from the motor.
3
4
1
1
2
3
4
2
Page The Transmitter
1. Steering Wheel: Controls direction (left/right) of the model.
2. Throttle Trigger: Controls speed and direction (forward/reverse)
of the model.
3. Antenna: Transmits signal to the model.
4. On/Off Switch: Turns the power on for the transmitter operation.
5. Indicator Lights: Green (top) light indicates adequate battery
power. Red (bottom) light indicates signal strength.
6. Steering Trim (ST. TRIM): Adjusts the “hands off” direction of the
model.
7. Throttle Trim (TH. TRIM): Adjusts the motor speed to stop at
neutral.
8. Steering Rate: Adjusts amount front wheels move when the
steering wheel is turned left or right.
9. Steering Reverse Switch (ST. REV): Reverses the function of the
steering when the wheel is turned left or right.
10. Throttle Reverse Switch (TH. REV): Reverses the function of the
speed control when pulled back or pushed forward.
11. Bottom Cover: Covers and holds the batteries powering the
transmitter.
10
9
3
5
6
4
7
8
1
2
11
Re-Binding the Transmitter to the Receiver
The Losi™ DSM® radio system included in the Mini-Rock Crawler operates on 2.4GHz, and provides 79 different channels, which
are automatically selected when the transmitter and vehicle are turned on. The communication between the transmitter and
receiver starts in the few seconds after the transmitter and vehicle are both turned on. This is called the “binding process.” The
Losi DSM radio system will not interfere with previous technology radio systems that operate on 27MHz or 75MHz frequencies
and you will not receive any interference from them.
Although set at the factory, below are the steps required to re-bind your transmitter to the receiver should the need arise.
During the bind process there is a unique ID from the transmitter communicated to the receiver to ensure trouble free radio
operation.
Steps to Re-Bind the Receiver to the Transmitter
1. Ensure that the transmitter and vehicle are both turned off.
2. Using the supplied Bind plug (which looks like a standard receiver
plug with a wire loop installed) insert the plug into the receiver
slot labeled “BIND”. Looking down on the receiver this slot would
be below the LED and is the furthest from the LED, or nearest to
the corner of the receiver.
Note: You do not need to remove any of the other plugs
to re-bind.
3. With the Bind plug installed, turn on the vehicle. Notice a blinking
orange LED within the receiver
4. Now you are ready to turn on the transmitter. You should notice
on the back of the transmitter a similar blinking orange LED under
the translucent cover.
5. Both the receiver and transmitter orange LED will stop blinking
and become solid indicating they have “bound” themselves
together.
6. Please turn off both the vehicle and transmitter to remove the
Bind plug from the receiver. Failing to remove the Bind plug will
cause the transmitter to attempt to rebind every time you turn on the vehicle and transmitter.
7. Turn on both the vehicle and transmitter to ensure operation. If the transmitter does not control the vehicle, please
repeat steps 1 to 6. Should this not correct the problem please call Horizon Service/Repair for further assistance.
8. The Bind process is complete. Your vehicle’s radio system should be ready for use.
Page Resetting the ESC
The ESC comes from the factory preset and ready for use. If for some reason you should need to reset the ESC, use the
following instructions.
1. Turn on the transmitter and ESC. Press the setup button—both the RED and GREEN LEDs will come on.
2. Pull the throttle trigger all the way back (full speed) and press the setup button once—only the GREEN LED will come on.
3. Push the throttle trigger full forward (brake/reverse) and push the setup button once—only the RED LED will come on.
4. Let the throttle trigger return to the neutral (center) position and press the setup button once more to save the program
and exit setup mode—only the GREEN LED will be on.
Notes:
A: If the receiver does not receive a signal from the Transmitter, the ESC will not enter the Program mode.
B: While in Program mode, the motor will not run.
C:If the setup button is not pressed for 20 seconds while in the Program mode, the ESC will exit the Program mode and
the data will be saved.
Chassis Tuning
The following are simple adjustments and easily maintained settings to assure proper operation and performance. It is
advised when making any adjustment that you do so in small increments and always check for other parts of the chassis that
are affected.
Slipper Adjustments
The Mini-Rock Crawler is equipped with a slipper device offering both traction
control and protection for the transmission. The slipper is primarily used to
help absorb sudden impacts on the drivetrain or when using more powerful
aftermarket motors and/or battery packs. Additionally, it can be used to smooth
out the flow of power to the wheels. Adjustment is made by turning the 3mm
adjustment nut clockwise (to the right) to reduce the slip, or counterclockwise (to
the left) to increase the slip. As you punch the throttle, the slipper should slip no
more than an inch as it accelerates. With the included motor and battery pack it
should slip just a little. Make sure you replace the gear cover before running.
Increase Slip
Decrease Slip
Steering Rate
Your transmitter is equipped with a steering rate control to the left of the steering wheel. This advanced feature, usually found
only on competition-type radios, allows you to adjust the amount the front tires move when you turn the steering wheel.
Less Rate
Full Rate
Steering Servo Saver Removal
The Mini-Rock Crawler steering servo comes with a servo saver installed. As your rock crawling skills improve, we have
included a steering arm that eliminates the servo saver. Although this setup provides more precise steering, it does put your
servo gears at risk for breakage. Use caution when the steering servo is under severe loads.
1. Center servo saver arm
2. Remove servo saver arm
assembly from the servo.
Remove the steering ball stud
and install into solid servo arm.
Page 3. With servo output shaft still
centered, install solid servo
arm with the shorter screw
supplied and attach steering
linkage.
Changing the Pinion Gear/Gear Ratio
Before you change the pinion gear ask yourself why you are doing it. In general, if you change to a larger pinion the wheel
speed will increase but you will see less acceleration and run time. This would only be advisable for low traction climbs.
Changing to a smaller pinion will give you quicker acceleration and possibly a bit longer run time but a little less wheel speed.
This would be good for high traction rock climbs. The pinion on the Mini-Rock Crawler offers the best balance of both. To
change the pinion, remove the gear cover, loosen the motor screws and slide the motor back. Use the included 1.5mm allen
wrench to loosen the pinion setscrew. Place the new pinion on the end of the motor shaft and, using the flat of the pliers or a
similar flat tool, push it on to the same position as the one removed. See Setting the Gear Mesh below. Your Mini-Rock Crawler
comes equipped with a 14-tooth pinion which provides an overall ratio of 86:1. If you increase the pinion size to a 15-tooth
gear, the ratio will change to 80:1 to decrease the pinion size to a 13-tooth will be 92:1.
Warning: When running aftermarket motors, check with the motor manufacturer for correct gearing. Never over-gear
the motor as it can cause overheating, damaging it and the speed control.
Setting the Gear Mesh
The motor screws should be slightly loose. Slide the motor forward allowing the pinion gear to mesh
with the spur gear. Snug (not tight) the bottom motor screw and try rocking the spur back and forth.
There is a slight bit of movement before the motor is forced to turn over. If not, pull the top of the
motor back slightly and recheck. If there is too much slop between the gears, push the top of the
motor forward. When set properly the wheels can be spun forward freely with very little noise. Make
sure to tighten both motor screws and replace the gear cover before running.
Tuning Tips
Weight: Adding weight to the front wheels of the Mini-Rock Crawler will help
increase traction and lower the over center of gravity. Using the LOSA99201
Self Stick weights, carefully cut each piece in half and place inside the wheel as
pictured. It is important that the wheel weights be evenly placed inside the
wheel to ensure that it is balanced.
Shock Oil and Springs
The Mini-Rock Crawler shocks are filled with Losi 30wt shock fluid. By switching to thinner shock fluid, the Mini-Rock Crawler
will have more traction, quicker weight transfer and softer dampening. Doing the opposite will cause the Mini-Rock Crawler to
react more slowly to input and have slower weight transfer. Adjusting these settings will help adapt the Mini-Rock Crawler to
your conditions. Please note, the Mini-Rock Crawler comes from the factory with a stiffer rear spring to help minimize “Torque
Flex” often found in 4wd driver rock crawlers.
Cleaning
Performance can be hindered if dirt gets in any of the moving suspension parts. Use compressed air, a soft paintbrush, or
toothbrush to remove dust or dirt. Avoid using solvents or chemicals as they can actually wash dirt into the bearings or
moving parts as well as cause damage to the electronics.
Page Rebuilding/Refilling the Shocks
Step 2
Turn the shock upside down
and remove the black shock
cartridge/shaft assembly from
the shock body by turning it
counterclockwise.
Step 1
After removing the shock, push
up on the lower spring cup and
remove it from the shaft. Remove
the spring and preload spacers.
Note: If you only wish to change
or fill the shock fluid, skip to
step 5.
Step 3
Remove the top E-clip from the
shock shaft. Remove the shock
piston. Remove second E-clip.
Remove the old cartridge.
Put a drop of oil on the shock
shaft before installing a new
shock cartridge.
Step 4
Reinstall the lower E-clip. Slide
the shock piston onto the shock
shaft against the E-clip. Reinstall
the top E-clip.
Step 5
If you plan on completely
changing the shock fluid
(suggested), dump out the
old fluid from the shock body.
Carefully fill the shock body
with fluid to the bottom of the
threads inside the shock body.
Note: Your Mini-Rock Crawler
comes with 100wt shock fluid
from the factory.
Step 6
Pull the shaft out so the piston is
next to the cartridge and reinstall
the assembly into the shock body,
turn in a clockwise direction until
snug—DO NOT TIGHTEN yet!
Step 7
Turn the shock over and use a #0
Phillips screwdriver to remove the
small bleed screw at the top of
the shock. Slowly push the shock
shaft up until it stops. Excess fluid
should flow out of the bleed hole.
Slowly pull the shock shaft halfway
back and replace the bleed screw.
Use pliers to tighten the cartridge,
being careful not to strip the plastic
lobes on the cartridge.
Step 8
Replace the spring and spring
cup and test the shock action for
smoothness and leaks. Retighten
the bleed screw or cartridge if
either leaks. Remount the shock
on your truck.
Service/Repair
Radio/Speed Control and Motor
If you have any problems other than those covered in the troubleshooting section, please call the electronics service
department at (877) 504-0233. They will be able to give your specific problem additional attention and instruct you as to what
needs to be done.
Chassis
If you have any questions other than those covered in the troubleshooting or maintenance sections, please call (877) 5040233.
Page LOSI DSM Radio System
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with the
applicable regulations governing a radio transmitter in the 2.400 GHz to 2.4835 GHz frequency range.
The following countries associated regulatory agencies recognizing the noted certifications for this product as authorized for
sale and use are:
USA - Belgium - Canada - Denmark - Finland - France - Germany - Italy - Netherlands - Spain - Sweden - UK
Warning
An RC model is not a toy! If misused, it can cause serious bodily harm and damage to property. Operate only in open areas and
follow all instructions included with your radio and model.
Warranty Information
Warranty Period
Horizon Hobby, Inc., (Horizon) warranties that the Products purchased (the “Product”) will be free from defects in materials
and workmanship at the date of purchase by the Purchaser.
Limited Warranty
(a) This warranty is limited to the original Purchaser (“Purchaser”) and is not transferable. REPAIR OR REPLACEMENT AS
PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. This warranty covers only those Products
purchased from an authorized Horizon dealer. Third party transactions are not covered by this warranty. Proof of purchase
is required for warranty claims. Further, Horizon reserves the right to change or modify this warranty without notice and
disclaims all other warranties, express or implied.
(b) Limitations- HORIZON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCT. THE PURCHASER ACKNOWLEDGES THAT THEY
ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED
USE.
(c) Purchaser Remedy- Horizon’s sole obligation hereunder shall be that Horizon will, at its option, (i) repair or (ii) replace, any
Product determined by Horizon to be defective. In the event of a defect, these are the Purchaser’s exclusive remedies. Horizon
reserves the right to inspect any and all equipment involved in a warranty claim. Repair or replacement decisions are at the
sole discretion of Horizon. This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse,
abuse, negligence, commercial use, or modification of or to any part of the Product. This warranty does not cover damage due
to improper installation, operation, maintenance, or attempted repair by anyone other than Horizon. Return of any goods by
Purchaser must be approved in writing by Horizon before shipment.
Damage Limits
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION
OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCT, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. Further, in no event shall the liability of Horizon exceed the individual price
of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse,
no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user
accepts all resulting liability.
If you as the Purchaser or user are not prepared to accept the liability associated with the use of this Product, you are advised
to return this Product immediately in new and unused condition to the place of purchase.
Law: These Terms are governed by Illinois law (without regard to conflict of law principals).
Safety Precautions
This is a sophisticated hobby Product and not a toy. It must be operated with caution and common sense and requires some
basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to
the Product or other property. This Product is not intended for use by children without direct adult supervision. The Product
manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and
warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or injury.
Page Questions, Assistance, and Repairs
Your local hobby store and/or place of purchase cannot provide warranty support or repair. Once assembly, setup or use of
the Product has been started, you must contact Horizon directly. This will enable Horizon to better answer your questions
and service you in the event that you may need any assistance. For questions or assistance, please direct your email to
productsupport@horizonhobby.com, or call 877.504.0233 toll free to speak to a service technician.
Inspection or Repairs
If this Product needs to be inspected or repaired, please call for a Return Merchandise Authorization (RMA). Pack the Product
securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the
rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged
parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. A Service Repair Request is
available at www.horizonhobby.com on the “Support” tab. If you do not have internet access, please include a letter with your
complete name, street address, email address and phone number where you can be reached during business days, your RMA
number, a list of the included items, method of payment for any non-warranty expenses and a brief summary of the problem.
Your original sales receipt must also be included for warranty consideration. Be sure your name, address, and RMA number are
clearly written on the outside of the shipping carton.
Warranty Inspection and Repairs
To receive warranty service, you must include your original sales receipt verifying the proof-of-purchase date. Provided
warranty conditions have been met, your Product will be repaired or replaced free of charge. Repair or replacement decisions
are at the sole discretion of Horizon Hobby.
Non-Warranty Repairs
Should your repair not be covered by warranty the repair will be completed and payment will be required without notification
or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for repair you
are agreeing to payment of the repair without notification. Repair estimates are available upon request. You must include this
request with your repair. Non-warranty repair estimates will be billed a minimum of ½ hour of labor. In addition you will be
billed for return freight. Please advise us of your preferred method of payment. Horizon accepts money orders and cashiers
checks, as well as Visa, MasterCard, American Express, and Discover cards. If you choose to pay by credit card, please include
your credit card number and expiration date. Any repair left unpaid or unclaimed after 90 days will be considered abandoned
and will be disposed of accordingly. Please note: non-warranty repair is only available on electronics and model engines.
Electronics and engines requiring inspection or repair should be shipped to the following address:
Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822
All other Products requiring warranty inspection or repair should be shipped to the following address:
Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822
Please call 877-504-0233 with any questions or concerns regarding this product or warranty.
Instructions for Disposal of WEEE by Users in the European Union
This product must not be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their waste
equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources
and ensure that it is recycled in a manner that protects human health and the environment. For more information about
where you can drop off your waste equipment for recycling, please contact your local city office, your household waste
disposal service or where you purchased the product.
Page Troubleshooting Guide
• Doesn’t operate
Battery not charged or plugged in
Receiver switch not “On”
Transmitter not “On” or low battery
Charge battery / plug in
Turn on receiver switch
Turn on / replace batteries
• Motor runs but wheels don’t
move
Pinion not meshing with spur gear
Pinion spinning on motor shaft
Slipper too loose
Transmission gears stripped
Drive pin in axle missing
Adjust pinion/spur mesh
Replace pinion gear on motor
Check & adjust slipper
Replace transmission gears
Check & replace
• Steering doesn’t work
Servo plug not in receiver
Servo gears or motor damaged
Check if plug in/all the way
Replace or repair servo
• Won’t turn one direction
Servo gears damaged
Replace servo gears
• Motor doesn’t run
Motor plugs loose
Motor wire broken
ESC damaged
Plug in completely
Repair or replace as needed
Call Electronics Tech
• ESC gets hot
Motor over-geared
Driveline bound up
Put smaller pinion on motor
Check wheels & trans for binds
• Poor run time and/or
sluggish acceleration
NiMH pack not fully charged
Charger not allowing full charge
Slipper slipping too much
Motor worn out
Driveline bound up
Recharge
Try another charger
Check/adjust slipper
Replace motor
Check wheels & trans for binds
• Poor range/glitches
Transmitter batteries low
Transmitter antenna damaged
Battery low in truck
Loose plugs or wires
Check & replace as necessary
Check & tighten
Replace or recharge
Check motor and power plugs
• Slipper won’t adjust
Drive pin missing in shaft
Spur gear face worn out
Replace drive pin
Replace spur gear & adjust slipper
Page Page 10
Page 11
Page 13
Page 14
Replacement Parts
Item #DescriptionRetail
Item #DescriptionRetail
LOSB0805
LOSB0806
LOSB0822
LOSB0823
LOSB0828
LOSB0839
LOSB0941
LOSB1048
LOSB1064
LOSB1068
LOSB1202
LOSB1376
LOSB1377
LOSB1378
LOSB1400
LOSB1401
LOSB1403
LOSB1405
LOSB1406
LOSB1407
LOSB1409
LOSB1410
LOSB1413
LOSB1414
LOSB1415
LOSB1417
LOSB1418
LOSB1419
LOSB1421
LOSB1422
LOSB1425
LOSB1426
LOSB1427
LOSB1428
LOSB1429
LOSB1430
LOSB1431
LOSB1434
LOSB1436
LOSB1437
LOSB1440
LOSB1441
LOSB1442
LOSB1443
LOSB1444
LOSB1447
LOSB1448
LOSB1453
LOSB1454
LOSB1460
LOSB1470
LOSB1480
LOSB1490
LOSB1498
LOSB1499
Center Transmission Gear Cover..................................$5.99
Center Transmission Gear Set........................................$5.99
Center Transmission Bearing Set...............................$19.99
Bearing 4x8x3mm (Axle Bearing)................................$7.99
Bearing 7x11x3 (Diff Bearing)........................................$5.99
Center & Diff Lockers (Plastic)........................................$6.99
Output Shaft Set (Axles & Center Diff ).......................$7.99
Top Shaft & Idler Shaft ....................................................$6.99
Assembled Shocks (2)...................................................$15.99
Shock Rebuild Kit (2).........................................................$5.99
Shocks Shafts (2)................................................................$5.99
Shock Body (2)....................................................................$5.99
Ball Stud Long & Shock Mounting Brace...................$6.99
Shock Spring Set (Soft)....................................................$2.99
Shock Spring Set (Firm)...................................................$2.99
Assembled Universal Joints/Slider shafts..............$17.99
Slider Shafts Set (plastic).................................................$7.99
12mm Wheel Hex Set w/hardware..............................$6.99
Chrome Wheels..................................................................$8.99
1.9” Mini-Rock Claws Tires (2).....................................$13.99
1.9” Mini-Rock Claws Glued(2) Chrome Wheels...$22.99
Wheel Rings (8) Blue.........................................................$7.99
Wheel Rings (8) Red..........................................................$7.99
LOSB1320
LOSB1321
LOSB1400B
LOSB1400R
LOSB1461
LOSB1471
LOSB9603
LOSB9605
LOSB9833
Mini-Rock Crawler Clear Body w/stickers...............$16.99
1/18th Grappler Body w/Stickers & Mask..............$18.99
Blue Anodized Chassis Plate Set Lazer etch..........$15.99
Red Anodized Chassis Plate Set Lazer etch...........$15.99
Aluminum 12mm Hex Set...........................................$14.99
Black Chrome Wheels (2).................................................$8.99
1-3 Cell LiPo Charger.....................................................$54.99
Intelligent LiPo Balance Charger, 1-5 Cells..........$139.99
7.4V 1650mAh 2-Cell LiPo 20C: Slider.....................$64.99
Losi DSM Transmitter Only..........................................$69.99
Losi DSM Receiver........................................................$109.99
MSX12 Digital Mini Servo............................................$29.99
MSX12 Digital Mini Servo Gear Set.............................$3.99
Mini Rock Crawler ESC Only........................................$47.99
1/18 Mini Rock Crawler Motor: .................................$14.99
Fr/R Metal Diff Gear & Housing set: . .......................$13.99
Body Clips (10)....................................................................$1.50
Slipper Hardware Set........................................................$4.00
Spur Gear Bag.....................................................................$3.50
7.2v 1100mAh Ni-MH Battery.....................................$39.99
Mini Rock Crawler Body (Blue)...................................$19.99
Mini Rock Crawler Body (Red)....................................$19.99
Mini Rock Crawler Body (Black):................................$19.99
Aluminum Chassis Plate Set: .....................................$11.99
Motor Plate...........................................................................$5.99
Body Post Set.......................................................................$4.99
Axle Housing (2) w/hardware........................................$9.99
Axle Shafts (2)......................................................................$7.99
Axles (2).................................................................................$7.99
Front Spindles & Carriers w/hardware.......................$7.99
Steering Links (Long & Short)........................................$7.99
Rear Hub Set w/hardware...............................................$5.99
3 Link Connector w/pivot ball.......................................$7.99
Radio Plate, Battery Mounts & Strap...........................$8.99
Lower Suspension Rods..................................................$6.99
Lower Suspension Rod Ends w/pivot ball.................$7.99
Complete Screw Kit........................................................$12.99
Servo Plates & Mounts.....................................................$6.99
Servo Saver & Arm Set.....................................................$6.99
Center Transmission Case Set........................................$5.99
Transmission Skid Plate...................................................$4.99
Page 15
Option Parts
TM
Losi
A Division of Horizon Hobby, Inc.
4105 Fieldstone, Champaign, IL 61821
www.Losi.com
1-877-504-0233
Page 16
MRCV2 R5816T