Brochure Euroflex Classic
Transcription
Brochure Euroflex Classic
200 classic workchair 200 classic workchair - flexible comfort and ergonomics 200 Classic is a work chair developed for disabled people. Extremely easy rolling wheels in combination with a flexible chassis - Flexbase- makes it easy to move the chair with the feet and transfer can be done in a safe and comfortable way. Flexbase gives stability and good brakeing. An ergonomical shaped seat unit gives good seating position and comfort. The flexible adjustments in combination of a wide range of accessories makes it easy to create a well functional work chair for every individual needs. As standard 200 Classic has a gas assisted seatlift, but can also be equipped with an electric actuator and electric brakes or tilt. Standard: • flexbase chassis • workchair seatunit model 200 • seat 46x46 cm, black Dot • back low 35x30 cm , black Dot • armsupport - 30 cm polyurthane with plush • seat angle - manual • seat lift - gas • central brake rear wheels - manual • wheels - 100 mm Accessories: (a selection) • back - high - 35x44, 40x44 cm • back - low - 40x30 cm • back - slingback • neck support - for high back • trunk support - for high back • side support • arm support - soft - 30 cm, 40cm • arm support - swing away • abductor • seats 40x40, 40x46, 49x51, coxit 46x46 cm • seatlift electric - 180 mm, 250 mm stroke • seat angle electric • tilt- electrc • brakes - electric • cover - seat and back - inc. protected • table • footplate, footring • leg support - separate -manual or electric • push handle - for attender • chassis - standard - flexbase - H You can chose between 3 different types of chassis. Standard (steel), Flexbase, and H-chassis. Technical data: Class Seat, sizes Seat depth Seat height, gas Seat height, EL Back, sizes Back, height Arm support, size Arm support, height Seat, angle, manual, forward Seat, tilt, EL- forward-backward Chassis, length (flexbase) Chassis, width (flexbase) Fabric, colors Total weight Max user weight Battery - electric Flexbase chassis with centralbrake on rear wheels. workchair - ISO 180903 46x46, 40x40, 40x46, 49x51 cm 37-49 cm, adjusteble 43-57 cm - short, 45-65 cm - long * 40-58 cm - short. 45-70 cm - long * 35x30, 40x30, 35x44, 40x44 cm 37-54 cm, adjusteble 30x6 cm, polyurthane with plush 0- 26 cm, adjusteble 0º to +20º -20º to +10º 55 cm 51 cm black Dot, blue Video, gray Video 20 kg - gas, 28 kg - EL 140 kg 12V/7A - 1p / chair * the seatlifts position in the chassis is adjusteble by loosen a screw joint. This affects the highest and lowest seatheight. The position is adjusteble down 3cm and up 10 cm. art.nr. BRO-200-ENG rev:2010-11 Alfred Nobels Allé 110, Tullinge Box 1179, 141 24 Huddinge, Sweden, Tel:+46-8-449 58 00 Fax:+46-8-740 40 18, www.rvseurovema.se Eurovema AB reserves the right to make technical changes. Several alternative for armsupports are availeble e.g. swing away, soft and hemiplegic. 200 Classic in black Dot