rigging product of the year award

Transcription

RIGG
IN
OF TH G PROD
U
E YEA
R AW CT
ARD
2005
0 0 : 0 3 : 3 2
V E R S A T I L E
I N T E G R A T I O N
Flexible connectivity to and from various system
integration options, such as DMX, timecode, etc.
0 0 : 0 1 : 5 4
S A F E T Y
I N
M O T I O N
CyberHoist and InMotion3D
are approved in accordance
with BGV-C1 (GUV-VC1),
BGG 912 (GUV-G 912) and
DIN 56950 Technical and
Safety Regulations.
0 0 : 0 5 : 0 4
O B J E C T
O R I E N T E D
Easy and fast object-oriented
programming and operating
through InMotion3D CyberHoist
Manager with 3D visualisation
and CAD files import option:
To Programm in Minutes.
0 0 : 0 0 : 3 2
S M O O T H ,
S I L E N T
A C C E L E R A T I O N
Silent and stepless
operation, with variable
speeds from ‘true-zero
speed’ to 40 mtr-min
(2 ft-sec), with weight
capacities from 250 kg
(1/4 ton) to 500 kg (1/2
ton) to 1000 kg (1 ton).
0 0 : 0 7 : 5 7
I N T U I T I V E
P R E C I S I O N
Digital precision with
0.1 mm accuracy, from
‘true-zero speed’ to 40
mtr/min (2 ft/sec).
0 0 : 0 0 : 1 4
I N T E L L I G E N C E
I N
3 D
Next generation intelligent chain hoist with
flux-vector drive and unique IP address. Processor and
other components are build into the hoist. Continuous
‘heartbeat’communication between all system components
over dedicated XLNT DataMotion Ethernet system.
CYBERHOIST with InMOTION3D
A REVOLUTION IN MOTION CONTROL
The revolution in motion control continues. XLNT Advanced Technologies' CyberHoist
'intelligent chain hoist motor' system with the dedicated InMotion 3D design and control
software create a powerful new tool for achieving complex and dynamic set element
movements quickly, safely and in near silence.
System options include (dual) Full Production System, (single) Production System and
Notebook Production System, a handheld controller for fast load-in and load-out and an
expanded range of three CyberHoist motors, providing a wide choice of loading and speed
ranges.
Designed in cooperation with lighting and set-designers and production managers, this
revolutionary system has all the features the entertainment and corporate presentations
markets have asked for – and more. Abilities include fast programming, accurate
positioning and repeatability, true timed speed control, no truss twisting at start up and
much more.
Analogous to an automated lighting system – and unlike any other
motion control system on the market – this system's 'intelligence' is
shared between the host control computer and the dedicated CyberHoist
motors. Each motor's integral processor (communicating via XLNT
DataMotion technology over Ethernet) interacts with the host computer
to feed back real-time position, speed, temperature, load and status data
for total control and complete safety.
The advantages of controlled interaction between lighting and rigging
equipment, and the tremendous time-saving during a show build
XLNT DataMotion data distribution
over Ethernet, and PowerMotion power
distribution, complete the system
because of the system's simplicity to install, are clear. Above all,
accurate and smooth variable speed control from 0.1 mm/sec (0.004"/sec) up to 40
metres/ min* (2 ft per sec), in steps of 0.1 mm/sec, permits programming with a precision
of +/- 0.1 mm over the whole chain length.
CREATOR OF CYBERHOIST
Top: Eurovision Song Contest 2007 (LD Mikki
Kunttu, production manager Ola Melzig for
Spectra Sweden and Eastway). Below: Opera
North's production of 'Arms and the Cow'
InMOTION3D IN COMMAND POWERFUL,
INTUITIVE, FAST GRAPHICAL CREATIVITY
The secret of the system's supple character can be found in the revolutionary combination
of the InMotion 3D object-oriented software and CyberHoist intelligent hoist motors.
An intuitive graphical user interface allows complete objects (entire set elements, giant
video screens, props, exhibits and so on) to be programmed in minutes to move in either
two or three dimensions as a single object, with precision as fine as 0.1mm.
Multiple motor points are combined in one object so that once an object has been defined,
movements of the complete object can be programmed, the software determining
individual motor actions needed to achieve the move. Moves can
be stored in an editable playlist and replayed either manually or
automatically to timecode. It makes it simple for a programmer to
create very complex set moves, because the only requirement is to
think about where to move an object to, rotate it along its axes, and
at what speed. New 3D Formulas allow unlimited numbers of hoists
Clear, easy and flexible Start, Create and Play
through the 3 programme stages in InMotion3D:
1. Set-up Mode
2. Programm Mode, with
Presets, Cues, Cuelist und Runlist
3. Run Mode
per object.
The system removes the need to program individual motor
movements – the software takes care of all that, ensuring the
loadings are always safe at all speeds and positions. Programming
structures are straightforward, and similar to most lighting desks,
CyberHoist / InMotion3D in action: Paul McCartney US Tour
2005, Lighting and Set Design: LeRoy Bennett (Awarded Total
Production International Award 2006 for Set Design)
with cues stored in the memory of the hoists themselves.
InMotion 3D's integral CAD-style visualisation accepts drawings imported in Vectorworks
format or can create its own, while a built-in effects engine adds a database of standard
pre-programmed movement effects.
The PowerBook- or iMac-based InMotion3D-systems are capable of operating one single
to groups of CyberHoist motors.
For larger productions a flightcased, dual-computer system with
uninterruptable power supplies hosts the network. The optional RC1
handheld controller provides a host of options including a fast and safe
method of load-in and load-out without the need to set up a computer.
E D
N T
I E
R
O
C T
J E
O B
Object oriented programming makes
show design fast, simple and accurate
CYBERHOIST MOTOR ENGINEERING FOR
PRECISION AND SAFETY
There is a choice of three whisper-quiet CyberHoist 'intelligent hoist motors', available
with a Digital Loadcell. The ultra-fast CyberHoist CH250 provides speeds up to 40 metres
per minute (2 ft / sec), with a maximum loading of 1/4 ton (250kg); the original
CyberHoist CH500 handles loads of up to 1/2 ton (500kg) at up to 20 m / min (1
ft / sec) and the high power CyberHoist CH1000 handles up to 1 ton (1000kg) at
up to 10 m / min (1/2 ft / sec).
Each motor houses a digitally-controlled closed flux vector drive. It delivers
full torque at all speeds, with positioning accurate to 0.1mm. Absolute and
incremental encoders allow the motor to sense its exact position without
pre-calibration. The system can be programmed on- or off-line; the preprogrammed show can be patched to the hoists at the venue, enabling objects
to quickly be levelled with the 3D software presets. Each CyberHoist motor
has its own ID and can work either solo or as apart of a multiple-motor object.
Connection is enabled via XLNT's DataMotion protocol with power distribution
via the XLNT PowerMotion system.
Automatic speed adjustment can be effected, depending on whether travel
distance or travel time have priority. The system permits variable acceleration
and deceleration over the full speed range as well as dynamic braking, and
NOW AVAILABLE
WITH DIGITAL
LOADCELL
The new XLNT Digital Loadcell for
CyberHoist provides a unique realtime
and online accurate report, direct to the
processor-board and to the InMotion3D
CyberHoist Management System,
which uses this information for safety
and ease during programming and
operating.
provides full torque from real zero to maximum speed.
It is also an extremely safe system with a double DC brake. The motor has the
Madonna 'Confessions' World Tour
2006 (LD LeRoy Bennett) and Black
Eyed Peas (LD Marc Brickman)
option of a digital load sensor with a readout in the software's drive point
status view. The motors meet the defintively stringent German BGV-C1 (GUV-VC1) /
BGG-912 (GUV-G 912) safety regulations.
Also in the hardware specification are flow-controlled forced ventilation, modular
construction, constant temperature control at three points and a safety coefficient up to
10, complying with the DIN 56 950 international standard for dynamic overhead use.
S M O O T H , S I L E N T
A C C E L E R A T I O N
XLNT ADVANCED TECHNOLOGIES
MAKING GREAT IDEAS WORK
XLNT Advanced Technologies is responsible for conceiving, designing, practicalising and
engineering a growing range of sophisticated, DSP-based entertainment technology
solutions. Alongside our research and development staff a dedicated sales and customer
support team, and an international network of CyberHoist Service Points and Rental
Dealers, provides backup for every CyberHoist system.
CyberHoist / InMotion3D in action (from top):
Rammstein, 2005 (LD LeRoy Bennett);
L‘Oreal Color Trophy 2005 (Designer Martin
Sutherland, LD Nigel Catmur, for CS Media)
Clockwise from top: Coldplay's World Tour 'Twisted Logic (LDs Bryan Leitch and Nick Whitehouse); full production
system; Black Eyed Peas, Monkey Business Tour 2005 (LD Marc Brickman); Paul McCartney US Tour 2005 (LD LeRoy
Bennett); InMotion3D laptop system; Audio 'Talk of the Town' presentation (ShowEM); RC1 handheld controller.
T I M E C O D E
Top: UK TV series ‘Grease’ (designer Dominic
Tolfts and producer Toby Gorman, CyberHoist
system by Vertigo)
Below : DJ Tiësto at the Gelredome, Arnhem
(LDs Alain Corthout and Ignace D’Haese,
CyberHoist system by Flashlight Rental)
Clockwise from top left: installation by Vertigo of CyberHoist / InMotion3D System at the Festival Theatre, Chichester for the
production How To Succeed in Business Without Really Trying (design Francis O’Connor, LD Chris Ellis, production manager
Damien Partington); Clouseau In The Round (LD Luc Peumans of Painting With Light for PSE); Red Bull Racing (for Gearhouse;
producer David Plail); CDU Deutschland event (CyberHoist system by Lightcompany Neuss).
Eurovision 2007 photo: Louise Stickland/David Morrell
P R E C I S I O N
A Revolution in Rigging
and Motion Control
XLNT Advanced Technologies bring you the latest generation of the CyberHoist intelligent
motor system with InMotion3D programming and control software. This unique combination makes motion control as exciting and creative as never before.
You can move tiny or huge loads with sub-millimetre perfection, from imperceptibly slow to
speeds as fast as 40 metres per minute.
And InMotion3D's intuitive, object-oriented programming coupled to fast, elegant rigging
means you can be flying in minutes.
CyberHoist is available for rental through an
international network of Service Points and Rental
Dealers throughout Europe, North America and
beyond
XLNT Advanced Technologies
Utrecht, The Netherlands
T: +31 (0)30 247 9999
F: +31 (0)30 247 9998
E info@xlnt-at.com
W: www.xlnt-at.com
Since its introduction this unique system has also grown to include a choice of CyberHoist
motors to accomodate specific production requirements, control hardware, system options
and more.
Come and see the revolution for yourself and join the world-wide CyberHoist / InMotion 3D
network.
To arrange a demonstration of CyberHoist and InMotion 3D, make an appointment with the
XLNT Service Point or Rental Dealer in your territory.
XLNT Advanced Technologies reserves the right to change product specifications without notice as part of an ongoing product
development programme. CyberHoist and InMotion3D are trademarks of XLNT Advanced Technologies BV and Stagemaker is a
trademark of Verlinde SA. Macintosh and Power Mac are trademarks of Apple, Inc. Design and main production photography by
ML Media and MANX. Product photography by Doro Keman. © XLNT Advanced Technologies 2007.
High lifting power, intelligent variable speed chain hoist
1000 kg (1 ton) maximum load
0-10 m/min (0.54 ft/sec) variable speed
OVERVIEW
The CyberHoist 1000 intelligent chain hoist is one of three different hoists
for use with an InMotion3D system or RC1 handheld controller.
Designed to be operated motor-up or motor-down (for use with or
without a mothergrid), it provides a maximum travel speed of 10 m/min
(0.54 ft/sec) and a maximum load capacity of 1000Kg (2024 lbs). It is
designed to be controlled by the dedicated InMotion 3D object oriented
software or an RC1 handheld controller, and operated in conjunction with
XLNT DataMotion™ data distribution and PowerMotion™ power distribution
systems.
POWER AND INTELLIGENCE
The two principle components within the CyberHoist 1000 are a powerful and
precise, digitally-controlled closed loop flux vector drive and a sophisticated
processor module. It delivers full torque at all speeds from 0 to 10 metres
per minute (0.54 ft/sec, in 0.1 mm (0.004"/sec) speed steps, with positioning
accurate to 0.1 mm (0.004"). The combination of absolute and incremental
encoders means the motor constantly senses its exact position without
requiring pre-calibration. Zero speed is obtained without the use of brakes,
the Vector Drive control keeping the motor's axis in place. When preprogrammed off-line, it can quickly be levelled with the software presets at
each venue: for example, on a tour.
SOPHISTICATION AND SAFETY
This method makes it simple for a programmer to create very complex
moves with multi-hoist systems, the only programming requirement being
to instruct the software where to move a complete object to, what Height,
Roll and Pitch to apply, and the time to reach that desired position. The
software controls individual motor movements and ensures that the load
on each motor remains within safe limits at all speeds and positions. Safety
is further enhanced by a double DC brake and the optional digital loadcell,
which is viewable on the status screen.
Also in the hardware specification are forced ventilation, modular construction,
constant temperature control and a safety coefficient up to 10, complying with
the DIN 56925 international standard for dynamic overhead use.
CyberHoist CH1000
KEY features
• High load capacity and fully variable speed
• Ultra quiet operation: 57db(A) at 1 metre
• Microprocessor controlled hoist movements
• Digitally controlled flux-vector drive
• Absolute encoder for positioning and speed feedback
• Optional Digital Loadcell, viewable on the status
screen
• Forced ventilation
TECHNICAL DATA
CYBERHOIST CH1000
High lifting power, intelligent variable speed chain hoist
1000 kg (1 ton) maximum load
SPECIFICATIONS
Safety features
• Double DC brake system
Subject
EU
• Mechanical over-travel limits (up and down)
Maximum load
Speed range
500 kg
1012 lbs
MIN: 0 mm/min
MIN: 0 ”/min True Zero
True Zero Speed,
Speed, brakes not
brakes not engaged
engaged
MAX: 10 metres/min
MAX: 0.54 ft/sec
Speed variable in steps Speed variable in steps
of 0.1 mm/sec 25 bit
of 0.004”/sec,
resolution
25 bit resolution
0.1 mm
0.004”
Maximum length 80 mtrs Maximum length 262.4 ft
Standard length 22 mtrs
Standard length 72 ft
400V
208V
3A
9A
3-phase + earth
3-phase + earth
230/400V 50-60Hz
230/400V 50-60Hz
HanTM 10
Ethernet
Neutrik EtherConTM
2048 incremental. 25 bit absolute positioning
encoder
Integrated in hoist
Optional digital load cell integrated in hoist
Via dedicated PSU system hardware and software
based
Dual mechanical safety limits for emergency; multiple
software limits
2 mechanical brakes for emergency use. Braking
during operation is done through flux drive
57 dB(A) at 1 metre
57 dB(A) at 3.28 ft
Roadproof metal epoxy coated housing
92 kg (202.8 lbs)
(HxWxD) 170 x 630 x
(HxWxD) 6.7” x 24.9”
310 mm
x 12.2”
• Dynamic overload device and calculated slack chain protection
• Autonomous hard wired emergency circuit CE security level 4
Speed increments
(incorporated in power distribution set)
• Constant temperature control
• Status feedback via Ethernet of temperature, current position,
motor status, fan speed, grouping, brakes etc.
• Safety coefficient up to 10 – complies with applicable
international standards for safe mobile operations above
public (DIN 56925)
Positional accuracy
Chain length
Operating voltage
Nominal motor current
Power supply
Mains connector
Controls
Data connector
Encoder type
Encoder connection
Load cell
Emergency stop
InMotion3D software and the CyberHoist intelligent motor
system from XLNT Advanced Technologies make motion
control a truly creative process. Tiny or huge loads can
be moved with millimetre perfection, from imperceptibly
slow to breath-takingly fast speeds. And fast 3D object
oriented programming means you can be flying in minutes.
Limit switches
Brakes
Max sound level (at full speed)
Enclosure
Weight (including 22 m chain)
Dimensions
(Excluding hook and chain
bucket)
Classification
Product Code
US
BGV-C1, DIN 56925
CH 1000 / SM10.1008ml-F
InMotion3D and XLNT Advanced Technologies are trademarks of XLNT Advanced Technologies BV and Stagemaker is a trademark of Verlinde S.A.
Data Sheet 5/2008. XLNT Advanced Technologies reserves the right to change product specifications without notice as part of an ongoing product development programme.
TECHNICAL DATA
CYBERHOIST CH1000
Utrecht, the Netherlands
Tel +31 (0)30 247 9999
Fax +31 (0)30 247 9998
Email info@xlnt-at.com
www.xlnt-at.com
Versatile multipurpose intelligent chain hoist
500 kg (1012 lbs) maximum load
OVERVIEW
The CyberHoist 500 intelligent chain hoist is one of three different hoists
for use with an InMotion3D system or RC1 handheld controller.It provides
a maximum travel speed of 20 m/min (1.09 ft/sec) and a maximum load
capacity of 500Kg (1012 lbs). It is designed to be controlled by the dedicated
InMotion3D object oriented software and operated in conjunction with
XLNT DataMotion™ data distribution and PowerMotion™ power distribution
systems.
The two principle components within the CyberHoist 500 are a powerful
and precise, digitally-controlled closed loop flux vector drive and a
sophisticated processor module. It delivers full torque at all speeds from 0
to 20 metres per minute (1.09 ft/sec), in 0.1 mm (0.004"/sec) speed steps,
with positioning accurate to 0.1 mm (0.004"). The combination of absolute
and incremental encoders means the motor constantly senses its exact
position without requiring pre-calibration. Zero speed is obtained without
the use of brakes, the Vector Drive control keeping the motor's axis in
place. When pre-programmed off-line, it can quickly be levelled with the
software presets at each venue: for example, on a tour.
CyberHoist CH500
KEY features
• Versatile combination of load capacity and speed
Also in the hardware specification are forced ventilation, modular construction,
constant temperature control and a safety coefficient up to 10, complying
with the DIN 56925 international standard for dynamic overhead use.
screen
TECHNICAL DATA
CYBERHOIST CH500
Versatile multipurpose intelligent chain hoist
SPECIFICATIONS
Safety features
Subject
EU
• Mechanical over-travel limits (up and down) in chain guide
Maximum load
Speed range
500 kg
1012 lbs
MIN: 0 mm/min
True Zero Speed,
Speed, brakes not
brakes not engaged
engaged
MAX: 20 metres/min
MAX: 1.09 ft/sec
of 0.004”/sec,
resolution
25 bit resolution
0.1 mm
0.004”
400V
208V
3A
9A
3-phase + earth
3-phase + earth
230/400V 50-60Hz
230/400V 50-60Hz
TM
Han 10
Ethernet
Neutrik EtherConTM
encoder
Integrated in hoist
based
software limits
57 dB(A) at 1 metre
57 dB(A) at 3.28 ft
92 kg (202.8 lbs)
(HxWxD) 170 x 630 x
(HxWxD) 6.7” x 24.9”
310 mm
x 12.2”
• Dynamic overload device and calculated slack chain
protection
Speed increments
Positional accuracy
Chain length
• Status feedback via Ethernet of temperature, current
position, motor status, fan speed, grouping, brakes etc.
public (DIN 56925)
Operating voltage
Power supply
Mains connector
Controls
Data connector
Encoder type
Encoder connection
Load cell
Emergency stop
Limit switches
Brakes
Enclosure
Dimensions
bucket)
Classification
Product Code
US
BGV-C1, DIN 56925
CH 500 / SM10.0516ml-F
TECHNICAL DATA
CYBERHOIST CH500
Tel +31 (0)30 247 9999
Fax +31 (0)30 247 9998
www.xlnt-at.com
High speed intelligent chain hoist
0-37 m/min (2 ft/sec) variable speed
OVERVIEW
The CyberHoist 250 intelligent chain hoist is the high speed model
of the three CyberHoist motors that can be used with an InMotion3D
system or RC1 handheld controller. It provides a maximum
travel speed of 37 m/min (2 ft/sec) and a maximum load capacity of
250 kg (506 lbs). It is designed to be controlled by the dedicated InMotion3D
software and operated in conjunction with XLNT DataMotion™ data
distribution and PowerMotion™ power distribution systems.
The two principle components within the CyberHoist 250 are a powerful
and precise, digitally-controlled closed loop flux vector drive and a
sophisticated processor module. It delivers full torque at all speeds from 0
to 37 m/min (2 ft/sec), in 0.1 mm (0.004"/min) speed steps, with positioning
accurate to 0.1 mm (0.004"). The combination of absolute and incremental
encoders means the motor constantly senses its exact position without
requiring pre-calibration. Zero speed is obtained without the use of brakes,
the Vector Drive control keeping the motor's axis in place. When preprogrammed off-line, it can quickly be levelled with the software presets at
each venue: for example, on a tour.
Also in the h ardware specification are forced ventilation, modular construction,
constant temperature control and a safety coefficient up to 10, complying
with the DIN 56925 international standard for dynamic overhead use.
CyberHoist CH250
KEY features
• High maximum speed (37 m/min, 2 ft/sec)
screen
TECHNICAL DATA
CYBERHOIST CH250
High speed intelligent chain hoist
0-37 m/min (2 ft/sec) variable speed
Safety features
SPECIFICATIONS
Subject
EU
• Mechanical over-travel limits (up and down) in chain guide
Maximum load
Speed range
250 kg
506 lbs
MIN: 0 mm/min
True Zero Speed,
Speed, brakes not
brakes not engaged
engaged
MAX: 37 metres/min
MAX: 2 ft/sec
of 0.004”/sec,
resolution
25 bit resolution
0.1 mm
0.004”
400V
208V
3A
9A
3-phase + earth
230/400V 50-60Hz
HanTM 10
Ethernet
Neutrik EtherConTM
encoder
Integrated in hoist
based
software limits
57 dB(A) at 1 metre
57 dB(A) at 3.28 ft
92 kg (202.8 lbs)
(HxWxD) 170 x 630 x
(HxWxD) 6.7” x 24.9”
310 mm
x 12.2”
• Dynamic overload device and calculated slack chain
protection
• Separate encoders for inverter feedback and hoist positioning
• Status feedback via Ethernet of temperature, current
position, speed, motor status, fan speed, grouping, brakes
etc.
public (DIN 56925)
Speed increments
Positional accuracy
Chain length
Operating voltage
Power supply
Mains connector
Controls
Data connector
Encoder type
Encoder connection
Load cell
Emergency stop
Limit switches
Brakes
Enclosure
Dimensions
bucket)
Classification
Product Code
US
BGV-C1, DIN 56925
CH 250 / SM10.2532ml-F
TECHNICAL DATA
CYBERHOIST CH250
Tel +31 (0)30 247 9999
Fax +31 (0)30 247 9998
www.xlnt-at.com
High precision loadcell for CyberHoist
Integrated design, requires no
external cabling or hardware
OVERVIEW
The XLNT CyberHoist CH 250, CH 500 or CH 1000 can now be supplied with
an optional integrated high accuracy digital loadcell, the XLNT Cyberhoist
system from XLNT Advanced Technologies make motion control
Digital Loadcell.
This Digital Loadcell is integrated into a newly designed hook, replacing
the standard CyberHoist hook. The Loadcell measures the exact weight
in kilograms (kg) and communicates this to the CyberHoist for immediate
processing and safety verification; the data is also sent by ethernet to the
InMotion3D operating system for real time monitoring.
This option provides a unique new set of features for CyberHoist. It offers
the user direct access to load information and is used to set underload and
overload limits in XLNT InMotion3D CyberHoist software, resulting in a safer
environment for the audience, technicians and performers.
a truly creative process. Tiny or huge loads can be moved with
millimetre perfection, from imperceptibly slow to breathtakingly fast speeds. And fast 3D object
limit can be defined in each CyberHoist setup. When an individual CyberHoist
measures under- or over-load, it will immediately stop the movement
SPECIFICATIONS
Tel +31 (0)30 247 9999
www.xlnt-at.com
1,250 kg (2,755 lbs)
Safe working load
3,000 kg (6,614 lbs)
exceeds these safety limits.
Breaking load
> 15,000 kg (33,070 lbs)
When a CyberHoist reaches the over- or under-load limit for a predetermined
Creep error
amount of time (default 2 seconds) the object will also be forced to stop.
< 0.2 % (measured over 30
minutes)
Zero shift after loading
< 0.05 %
Since the CyberHoists are connected to objects and communicate to each
Reference temperature
23º C (73.4º F)
other, only the affected object (and no other object) will immediately stop,
Temperature range
-10º C (14° F) to +45º C (113º F)
Accuracy
+/- 1 kg (2.2 lbs)
without requiring any further action.
Maximum load measurement
of itself and all the other CyberHoists connected to the same object, if it
Fax +31 (0)30 247 9998
.
The nominal load for each CyberHoist is set by the operator in 'Object Info'
using the button 'Set Nominal Load'. A default under- or over-load safety
TECHNICAL DATA
XLNT CYBERHOIST
DIGITAL LOADCELL
Booster/Splitters for DMX data distribution systems
DB5 KEY features
System Components
DB5 Compact 5 output DMX Booster /Splitter
• 5 separately opto/galvanic-isolated outputs
• Opto/galvanic-isolated input
• 1 DMX-Hot-in/out loop through
• LED for data status and input power
• Short circuit protected in-and outputs
• EMC/ESD-protected in- and outputs
• Neutrik XLR 5-pin connectors
• Solid, compact truss-mounted housing
• Power 160-240V, 50/60Hz, 20W max. with PFC
• Size (physical, HxWxD) 175 x 150 x 60mm
• Weight (physical) 2,6 kg
DB5 Booster/Splitter
DataMotion™ is a trademark of XLNT Advanced Technologies BV.
TECHNICAL DATA
DATAMOTION™ DMX BOOSTER/SPLITTERS
Booster/Splitters for DMX data distribution systems
System Components
DB10 key features
DB10
• 10 separately opto/galvanic-isolated outputs
19” rack-mounted 10 output DMX Booster/Splitter
• Opto/galvanic-isolated input
XLNT Advanced Technologies manufactures professional products for the
lighting, audio and rigging industry.
Its DataMotion series consists of a complete range of modern, multifunctional and
robust Ethernet Switches, DMX Booster/Splitters and DMX / Ethernet Nodes.
The XLNT DataMotion series is designed according to touring and rental
specifications, ensuring the highest possible reliability standards to keep your
equipment working under all possible circumstances.
The XLNT DataMotion DMX Booster/Splitters create multiple, independent, DMX
lines from a single input.
The XLNT DataMotion products can be used for both rental and fixed install
applications, such as in theatrical, corporate events, concert touring, television
production, theme parks, and retail and architectural environments.
Products are housed in XLNT’s solid, standardized truss and rack-mount
enclosures.
DB10 Booster/Splitter
• 1 DMX-Hot-in/out loop through
• LED for data status and input power
• Short circuit protected in-and outputs
• EMC/ESD-protected in- and outputs
• Neutrik XLR 5-pin connectors
• 19” 1HE rack-mounted enclosure
• Power 160-240V, 50/60Hz, 20W max. with PFC
• Size (physical), WxHxD 483x44x160mm
• Weight (physical) 2,6 kg
DataMotion™ is a trademark of XLNT Advanced Technologies BV.
TECHNICAL DATA
DATAMOTION™ DMX BOOSTER/SPLITTERS
Tel +31 (0)30 247 9999
Fax +31 (0)30 247 9998
info@xlnt-at.com
www.xlnt-at.com
Emergency stop and power distribution system for CyberHoist intelligent chain hoists
SYSTEM COMPONENTS
PowerMotion Components
D8C
Dedicated 8 channel Distro system for CyberHoist
D16C
BO4
4-way Motor Breakout box
UPD6 Universal Power Distributor
Emergency Stop Systems
ESR
Emergency Stop button with Reset button
ESC8
Emergency Stop Combiner
ES
Emergency Stop button
Accessories
C-SeriesCabling – various lengths and types available for a complete functional system
PowerMotion UPD6 (front)
PowerMotion D16C Distro
Emergency Stop ES
XLNT advanced technologies supplies a complete
series of additional road-ready products, including
other power, emergency stop and signal distribution
equipment, along with dedicated truss brackets,
cabling, racks and flightcases for Cyberhoist
Systems.
Powermotion Emergency Stop and power distribution
systems, InMotion3D software and the CyberHoist
intelligent motor system from XLNT Advanced
Technologies make motion control a truly creative
process.
Tiny or huge loads can be moved with millimetre
perfection, from imperceptibly slow to breathtakingly
fast speeds. And fast 3D object oriented
programming means you can be flying in minutes.
PowerMotion UPD6 (rear)
PowerMotion ESC8
TECHNICAL DATA
POWERMOTION™
Emergency stop and power distribution system for CyberHoist motors
SYSTEM COMPONENTS
PowerMotion Components
D8C
D16C
BO4
4-way Motor Breakout box
UPD6 Universal Power Distributor
Emergency Stop Systems
ESR
Emergency Stop button with Reset
ESC8
Emergency Stop Combiner
ES
Emergency Stop button
Accessories
C-SeriesCabling – various lengths and types available for a
complete functional system
SPECIFICATIONS - D8C
Power distribution
Output connectors
Input connectors
Emergency Stop classification
MCD’s
Enclosure
Weight (physical)
Dimensions (physical)
Classification
SPECIFICATIONS - D16C
OVERVIEW
Power distribution
Output connectors
The D8C and D16C are power distributors for CyberHoist motors.
These products provide 3-phase unmodulated power on separate breakers for each CyberHoist connected to the distributor.
Connection to a CyberHoist is by means of a Harting multiconnector.
This multiconnector has individual circuits for 4 CyberHoists.
Input connectors
The D8C/D16C power distributor is equipped with a Class 4
Emergency Stop circuit, which can be triggered with the ES/ESR
E-Stop buttons. A typical E-Stop button circuit consists of one
Emergency Stop button with Reset (ESR) and multiple Emergency
Stop buttons (ES). of every power distributor, one Emergency Stop
button is mounted on the face panel.
When multiple D8C/D16C power distributors are in use, an ESC8
Emergency Stop Combiner must be used to connect the power
distributors to one E-Stop button circuit.
The ESC8 is also designed as a Class 4 Emergency Stop
Component.
All PowerMotion products are supplied in a standard lightweight
aluminium housing, with spigots to lock them vertically together.
8 CyberHoists
2 x Han Modular
(4 CyberHoists each)
1 x Han 5 80 amp 3P+N+G
1 x Neutrik Ethercon for
Emergency Stop circuit
Class 4
8 x 3 phase with thermal
protection 6.3 Amp, single switch
Lightweight aluminium
16 kg (35.27 lbs)
156mm(H) x 525mm(W) x 450mm(D)
6.14"(H) x 20.67"(W) x 17.71"(D)
BGV-C1
MCD’s
Enclosure
Weight (physical)
Classification
16 CyberHoists
4 x Han Modular
(4 CyberHoists each)
1 x Han 5 80 amp 3P+N+G
1 x Neutrik Ethercon for
Emergency Stop circuit
Class 4
21 kg (46.29 lbs)
256mm(H) x 525mm(W) x 450mm(D)
10.07"(H) x 20.67"(W) x 17.71"(D)
BGV-C1
SPECIFICATIONS - ESC8
Power distribution
Input connectors
MCD’s
Enclosure
Weight (physical)
Classification
8 Neutrik Neutricon
1x CEE 16A 240V
1x Neutrik Neutricon
Class 4
10 kg (22.04 lbs)
156mm(H) x 525mm(W) x 450mm(D)
6.14"(H) x 20.67"(W) x 17.71"(D)
BGV-C1
TECHNICAL DATA
POWERMOTION™
Tel +31 (0)30 247 9999
Fax +31 (0)30 247 9998
www.xlnt-at.com
Three complete programminig & control systems for Cyberhoist
INMOTION 3D LAPTOP or
iMac PRODUCTION SYSTEM
The InMotion3D Laptop OR iMac production (programming and control)
system for Cyberhoist is delivered on an Apple® MacBook Pro laptop
or 20" iMac computer. The powerful laptop features a backlit keyboard
for ease of use in dim lighting, auto-sensing power supply. It is designed
to be used in conjunction with the dedicated XLNT DataMotion™ data
Features
TECHNICAL DATA
InMotion3D CyberHoist Management Systems
• Flightcase(iMac Production System only)
• Apple MacBook Pro laptop with
15” LCD screen, OR iMac with 20"LCD screen
SPECIFICATIONS (ALL SYSTEMS)
Host computer
• Object oriented programming
• Unlimited number of objects
• Unlimited number of motors
• 3D visualisation of position and movement
Display
Hoist compatibility
Power supply
• Multiple cue lists
• Multiple position libraries
• Absolute and relative limits
• Dead-mans handle
Data connection
Power connection
system
Installed applications
Flightcase
Classification
• Dual Apple PowerMac computers
• Apple MacBook Pro laptop
• iMac 20"
• Dual colour 20” Cinema screens (Dual System)
• Integral 15” XVGA TFT-LCD colour screen
(Laptop System)
• 20" TFT-LCD (iMac)
CyberHoist CH250
CyberHoist CH500
CyberHoist CH1000
Dual PSU with Dual UPS (Dual System)
240V 50-60Hz universal input OR
Apple PSU, voltage sensing (Laptop System)
DataMotion system (supplied as required)
PowerMotion (supplied as required)
InMotion3D
Rugged aluminium with wheels and handles
(Dual System)
BGV-C1
• Software Emergency Stop
InMotion3D and XLNT Advanced Technologies are trademarks of XLNT Advanced Technologies BV and Stagemaker is a trademark of Verlinde S.A.. Macintosh, MacBook Pro and iMac are trademarks of Apple, Inc.
Tel +31 (0)30 247 9999
Fax +31 (0)30 247 9998
www.xlnt-at.com
Three complete programminig & control systems for Cyberhoist
INMOTION 3D FULL PRODUCTION SYSTEM
The InMotion3D Dual full production (programming and control) system
for Cyberhoist is based around dual Apple® PowerMac computers
running the InMotion3D software. These are packaged, together with
Uninterruptable Power Supplies, in a rugged, road-worthy flightcase with
ample space to store LCD screens and other accessories. It is designed
to be used in conjunction with the dedicated XLNT DataMotion™ data
Features
• Flightcase
• Dual PSU, with dual UPS
• Dual Apple Mac proTM computers
• Dual 20” Cinema screens
• Integrated network switch
• Object oriented programming
• Unlimited number of objects
• Unlimited number of motors
• 3D visualisation of position and movement
• Multiple cue lists
• Multiple position libraries
• Absolute and relative limits
• Dead-mans handle
• Software Emergency stop
TECHNICAL DATA
InMotion3D CyberHoist Management Systems

rigging product of the year award

Transcription

Similar documents

T-REX Manual - RC Helitechnics

a5-or-250 trailer hoist

COMMERCIAL BOOTHS

Hamilton Beach 936 3 Speed Milk Shake / Malt Mixer

Versamatic™ - Windsor Vacuums

Quadco`s Forespro® delimbers are engineered with the highest

Child Psychiatry Handouts

Snubby Line.

m6-250 series roll-off trailer

Q Series Brochure - International.indd