www.whp.co.uk - White House Products

White House Products Ltd
Issue 5 - Section 24
Parker T Series Motors
Standard
Gear Pumps
Tractor PTO Pump/
Gearbox Combinations
Tailor-made
Gear Pumps
Pump Drives
& Couplings
Non Standard
Pumps
Standard
Gear Motors
To view a motor, please click on the name below or use the bookmarks in your PDF software.
To return to this page, please click on the red text in the top corner of each page.
Non Standard
Gear Motors
Vane Pumps &
Vane Motors
Introduction and Contact Details
Parker TF Motors
346-347
Parker TE Motors
344-345
Parker TG Motors
348-349
Parker TJ Motors
344-345
Parker TH Motors
350-351
Standard
Piston Pumps
Non Standard
Piston Pumps
Standard
Piston Motors
Non Standard
Piston Motors
Tailor-made
Power Packs
To download other sections, please visit our website or click on the section name to the right.
To download the full catalogue, please click here.
Control Valves
Double Divertor
Valves
Spool Valves,
Bankable &
Monoblock
Remote
Control Cables
Cetop 3 and 5
Control Valves
Cetop 3 and 5
Valve Modules
Cetop 3 and 5
Manifold
High Torque
Motors
Hydraulic Motor
Reduction Units
Char-Lynn
Motors
Parker T
Series Motors
www.whp.co.uk
International +44 1475 742500
UK 0800 130 3103
sales@whp.co.uk
Fax +44 1475 742888
White House Products Ltd, Kelburn Business Park, Port Glasgow, Renfrewshire, PA14 6TD, Great Britain
UFI Filters
Cylinders /
Rams
Hose Assembly
Equipment
Hoses
Hose Fittings
Adaptors &
Bonded Seals
click here to return to front page
Parker T Series Motors
Welcome to the White House Products Ltd Catalogue
Our promise to you...
• That over 90% of orders are delivered from stock!
• That all UK back orders are delivered FOC.
• That all stocked UK single pump and motor orders not requiring
modification ordered before 4pm will be dispatched the SAME DAY.
• That any part supplied by us in error and unused by you will be
collected by our courier from you and credited in full - inclusive of
any carriage and packing costs - on its return.
• That any part ordered in error by you and returned to us as new will
be credited in full against the correct replacement supplied by us.
• That we shall try our very best at all times to provide you with what
you want.
• That if we don’t have a particular pump or motor in stock we will
offer to manufacture a replacement where this is possible.
Ex-Stock Availability
All items shown in this catalogue are stock items and therefore normally available for immediate despatch.
Enquiries, Pricing & Ordering
Telephone
UK 0800 130 3103
International +44 1475 742500
Fax - +44 1475 742888
e-mail - sales@whp.co.uk
www.whp.co.uk
To obtain prices from our website you need to have
a username and password. I.f you don't have these,
please register by going to www.whp.co.uk and
clicking on Register. You will get a username and
password by return.
Internet ordering can be done using a credit account,
if this has already been set up, or by credit card. To
provide total security to our credit card customers,
payments are transacted using Sage Pay's secure server.
Parker T Series Motors
Postal Address
White House Products Ltd
Kelburn Business Park, Port Glasgow,
Renfrewshire, PA14 6TD, Great Britain
Prices and secure online ordering at
By whatever means you use, we look forward to hearing from you!
click here to return to front page
Parker T Series Motors
Parker TE/TJ Motors - Ordering Code and Shafts
Ordering Code
For prices,
please register
online or contact
us by phone,
fax or email.
Use this chart to compile your ordering code. For example: W TE 0050 C W 10 0 AAAB
(TE Series Standard Motor, 50 cc/rev, 2 Bolt SAE A Flange, 1/2" BSP Side Ports, 1" SAE BB Parallel Shaft, Anti-Clockwise rotation)
W ## $$$$ !
£
?
* &&&&
## Series
TE
$$$$ Displacement
C SAE A, 2 Bolt Long Pilot
M 4 Bolt SAE A Magneto
D 4 Bolt Square
Bolt Wheel Mount
L 4(not
available with M & N ports)
Heavy
4 Bolt Wheel Mount,
H 7/8 - 14Duty
SAE (Only for TJ Series)
Code
! Flanges - US Pattern
0036
0045
0050
0065
0080
0100
0130
0165
0195
0230
0260
0295
0330
0365
0390
* P referred
Rotation
! F langes - European Pattern
Heavy Duty Option
TJ (H Flange and 08
Shaft only)
cc/rev
36 (not available
for TJ Motor)
41
49
66
82
98
130
163
195
228
260
293
328
370
392
A
F
B
N
U
Side Ports
0 Clockwise
1 Anti-Clockwise
Rear Ports
0 Anti-Clockwise
1 Clockwise
SAE A, 2 Bolt
4 Bolt, 3/8 - 16 UNC
SAE B, 2 Bolt
4 Bolt Mid Mount
4 Bolt Standard Wheel Mount
W 1/2” BSP
Universal M8 x 13 tappings
N Manifold
(Not available for L Flange)
Y 1/2” BSP Rear Ports
£ Ports - US Pattern
5/16 - 18 UNC Manifold
1/2 - 14 NPTF
7/8 - 14 SAE
3/4 - 16 SAE O-Ring Rear Ports
08
10
12
25
26
41
7.96
7.94
Parker T Series Motors
35
? Shafts - US Pattern
09
11
13
21
28
59
70
1" Straight with 0.38" crosshole
1" 6B Spline
Long 1" Keyed
1" Keyed (corrosion resistant)
7/8" - 13 Tooth Spline
7/8" 13 Tooth Spline SAE
1" Keyed (stainless steel)
344
ø25.37
ø25.40
10
1" SAE Parallel
8 -0.025
3
16
2.5
25
1” SAE 1:8 Taper Long
ø25.015
ø25.002
44.1
International +44 1475 742500
3
ø25.37
ø25.40
16
25.9
2.5
24.9
12
1” SAE 1:8 Taper Short
40
6.35 +0.025
www.whp.co.uk
6.35 +0.025
28.0 +0.3
ø25.40
ø25.37
8
Heavy Duty 1 1/4” SAE 1:8 Taper
(only for TJ Series)
35.1
34.1
all measurements are in millimetres (mm) unless otherwise stated
6.35 +0.025
3.4
3.0
19
Other options
available with
US Pattern
Motors
Heavy Duty 1 1/4” SAE 1:8 Taper (only for TJ Series)
1" SAE Parallel
1” SAE 1:8 Taper Short
1” SAE 1:8 Taper Long
25mm Parallel
1" 6B SAE Spline Long
Parker TE/ TJ - Shaft Type (only European shown, contact Sales for US version drawings)
ø31.88
ø31.75
AAAA Black Paint
AAAB Standard (no paint)
AANC Shuttle Valve
Relief Valve set at 100 bar
BBCP Internal
(Not available with Port Code Y)
Relief Valve set at 140 bar
BBCN Internal
(Not available with Port Code Y)
HAAP External Relief Valve set at 100 bar
HAAU External Relief Valve set at 140 bar
? Shafts - European Pattern
£ Ports - European Pattern
M
P
S
R
&&&& Option
60º
44.5
28.0 +0.3
ø25.32
ø25.02
25.4
26
25mm Parallel
UK 0800 130 3103
41
1" 6B SAE Spline Long
sales@whp.co.uk
6.3
6.2
ø21.53
ø21.40
Fax +44 1475 742888
Parker T Series Motors
click here to return to front page
Parker TE/TJ Motors - Specifications and Mounting Flanges
Parker TE/TJ - Specifications
Pump model
cc/rev
Displacement
in3/rev
Maximum Speed - Continuous
rev/min
Maximum Speed - Intermittent
rev/min
Maximum Oil Flow - Continuous
l/min
Maximum Oil Flow - Intermittent
l/min
bar
Maximum differential pressure Continuous
psi
bar
Maximum differential pressure Intermittent
psi
bar
Maximum supply pressure
psi
Maximum Torque - Continuous
Nm
Maximum Torque - Intermittent
Nm
KW
Maximum performance
[HP]
Minimum Starting Torque - Continuous Nm
Minimum Starting Torque - Intermittent Nm
Kg
Weight of motor with C, M & D Flange
Lbs
Kg
Weight of motor with L and H Flanges
Lbs
Dimension L (C Flange)
mm
Dimension L (M & D Flanges)
mm
Dimension L (L & H Flanges)
mm
0036
36
2.20
930
1160
35
40
140
2031
190
2756
200
2900
55
71
9
12.07
44
52
5.8
12.8
6.7
14.8
128
134
103
0045
41
2.50
810
1024
35
41
140
2031
190
2756
200
2900
70
100
10
13.41
44
64
6.3
13.9
6.8
15.0
131
136
106
0050
49
3.00
725
1020
35
50
140
2031
190
2756
200
2900
90
127
13
17.43
72
98
6.5
14.3
6.9
15.2
133
138
109
0065
66
4.03
705
940
45
60
140
2031
190
2756
200
2900
125
176
15
20.12
100
137
6.6
14.6
7.0
15.4
136
141
112
0080
82
5.00
560
750
45
60
140
2031
190
2756
200
2900
160
220
17
22.80
128
171
6.7
14.8
7.1
15.7
140
144
115
Parker TE/TJ - Mounting Flange Type
all measurements are in millimetres (mm) unless otherwise stated
A
L
2.55
14.2
13.69 / 13.28
C
2 Bolt SAE A
43.8
45º
120
A
B
ø130.2
48.3
0260
260
15.87
230
290
60
75
110
1595
155
2248
200
2900
400
550
17
22.80
320
449
8.2
18.1
8.6
19.0
174
179
150
ø82.5
B
0295
293
17.88
200
255
60
75
100
1450
145
2103
200
2900
428
582
16
21.46
328
445
8.3
18.3
8.8
19.4
181
185
156
0330
328
20.02
185
235
60
75
100
1450
135
1958
200
2900
443
600
15
20.12
344
453
8.7
19.2
9.1
20.1
170
192
162
0365
370
22.58
150
200
60
75
95
1378
125
1813
200
2900
467
648
14
18.77
373
477
9.0
19.8
9.4
20.7
195
200
171
L
80.0
B
0390
392
23.92
152
190
60
75
85
1233
120
1740
200
2900
445
628
13
17.43
348
462
9.2
20.3
9.6
21.2
200
205
175
ø13.5
45.72
ø44.4
B
2.55
D
4 Bolt Square
5.2
37
ø95.5
48.3
M
4 Bolt SAE A Magneto
14 ø95.25 /
ø95.14
44.5
ø127
ø92.5
48.3
A
ø82.55
15.0
45º
A
31.6
10.2 ø60.20 / 60.15
19
A
ø95.5
B
L
45.7
International +44 1475 742500
4
45º
65
6.7
A
ø135
B
ø147.6
L
4 Bolt Wheel Mount
www.whp.co.uk
0230
228
13.91
265
330
60
75
120
1740
165
2393
200
2900
380
514
18
24.14
304
411
7.9
17.4
8.3
18.3
168
173
143
Patented High-Pressure Shaft Seal
No check valves required
No extra plumbing
Wide choice of displacement range, flange and shaft options
Greater efficiency in systems design to suit individual requirements
45.97
A
ø106.4
ø13.5
0195
195
11.90
235
315
45
60
140
2031
190
2756
200
2900
390
528
17
22.80
312
411
7.7
17.0
8.1
17.9
162
166
137
A
ø126.9
ø92.5
ø13.5
36.8
19
B
46.8
ø72.90
ø82.5
Parker T Series Motors
L
133.4 ø95.5
B
0165
163
9.95
280
375
45
60
140
2031
190
2756
200
2900
310
436
17
22.80
248
338
7.4
16.3
7.8
17.2
155
160
131
22º 30'
6.38
A
ø82.5
B
ø106.38
48.5
45.72
A
ø95.5
127.3
B
48.3
0130
130
7.93
350
470
45
60
140
2031
190
2756
200
2900
255
352
17
22.80
204
274
7.1
15.7
7.6
16.8
149
153
124
Low Speed Geroter Motor
Zero leak commutation valve - for increased and more consistent
volumetric efficiency
Roller Vane Rotor Set
Reduces friction and internal leakage
Maintains efficiency throughout the life of the motor
(only European shown, contact Sales for US version drawings) 48.26 48.27
0100
98
5.98
470
630
45
60
140
2031
190
2756
200
2900
190
264
17
22.80
152
205
6.8
15.0
7.2
15.9
143
147
118
L
H
Heavy Duty 4 Bolt Wheel Mount (only for TJ Series)
UK 0800 130 3103
sales@whp.co.uk
Fax +44 1475 742888 345
click here to return to front page
Parker T Series Motors
Parker TF Motors - Ordering Code and Shafts
Ordering Code
For prices,
please register
online or contact
us by phone,
fax or email.
Use this chart to compile your ordering code. For example: WTF 0170 E W 26 0 AAAB
(TF Series Standard Motor, 169 cc/rev, 6 Bolt Flange, 1/2" BSP Side Ports, 25mm Parallel Shaft, Clockwise rotation)
WTF $$$$ !
£
?
* &&&&
$$$$ Displacement
Code
0080
0100
0130
0140
0170
0195
0240
0280
0360
0405
0475
cc/rev
81
100
128
141
169
197
238
280
364
405
477
* P referred
Rotation
! Flanges - Euro Pattern
E
M
H
V
6 Bolt Magneto
4 Bolt Magneto
4 Bolt, Wheel Mount
SAE A, 4 bolt (rear porting only)
SAE A, 2 Bolt
SAE B, 2 Bolt
Wheel, Front Brake
Wheel, Standard
Wheel, Optional (rear porting only)
Large Wheel Mount(rear porting only)
? Shafts - Euro Pattern
08
26
47
41
44
45
46
£ Ports - European Pattern
W
V
N
K
Y
A
X
B
L
1/2” BSP Side Ports
7/8” - 14 UNF O Ring Side Ports
Manifold M8 x 13 tappings (not possible with H Flange)
Manifold M6 x 12 tappings (only possible with H Flange)
1/2” BSP Rear Ports
7/8” - 14 UNF O Ring Rear Ports
1/2” BSP Radial Rear Ports
7/8” - 14 UNF O Ring Radial Rear Ports
Manifold M8 x 13 tappings Radial Rear Ports
E
H
M
S
Manifold, Radial Rear Ports
ISO 6149, M22 x 1.5
5/16 - 18 UNC Manifold (Not available with L, U or W Flange)
7/8 - 14 SAE
Heavy Duty 1 1/4” SAE 1:8 Taper
25mm Parallel
1” SAE BB Parallel
6B 1” SAE, 6 tooth spline
14 Tooth Spline
1 1/4" Parallel
32 mm Parallel
? Shafts - US Pattern
01
02
03
04
05
06
07
22
62
£ Ports - US Pattern
1" 6B Spline
1" Keyed
1 1/4" Keyed
10B Spline
1 1/4", 14 Tooth Spline
19 Tooth Spline
15 Tooth Spline
25mm Keyed
1 1/4" SAE, 14 Tooth Spline
Parker TF - Shaft Type (only European shown, contact Sales for US version drawings)
54.5
50
36.5
Parker T Series Motors
49.3
44
14 Tooth Spline
35
ø25.015
ø25.002
26
25mm Parallel
www.whp.co.uk
ø25.40
ø25.37
41.5
International +44 1475 742500
8.5
10 -0.036
3.4
3.0
55.5
19
6.35 +0.025
28.0 -0.3
7.96
7.94
08
Heavy Duty 1 1/4” SAE 1:8 Taper
8 -0.036
5.5
Other options available with US Pattern Motors
+0.2
ø31.750
ø31.725
45
1 1/4" Parallel
43
346
ø31.88
ø31.75
35.4
Black Paint
Standard (no paint)
FPM Seals
Castle nut
Shuttle Valve
Internal Relief Valve set at 200 bar
Internal Relief Valve set at 100 bar
Internal Relief Valve set at 70 bar
Internal Relief Valve set at 140 bar
Internal Relief Valve set at 170 bar
External Relief Valve set at 100 bar (M6)
External Relief Valve set at 100 bar (M8)
External Relief Valve set at 140 bar (M6)
External Relief Valve set at 140 bar (M8)
External Relief Valve set at 170 bar (M6)
External Relief Valve set at 170 bar (M8)
External Relief Valve set at 200 bar (M6)
External Relief Valve set at 200 bar (M8)
Motor-brake combination 11 bar
Motor-brake combination 16 bar
Motor-brake combination 22 bar
Motor-brake combination 11 bar
Motor-brake combination 16 bar
Motor-brake combination 22 bar
Motor-brake combination 22 bar
Motor-brake combination 22 bar
all measurements are in millimetres (mm) unless otherwise stated
ø7.91
ø7.89
ø31.750
ø31.725
41
AAAA
AAAB
AAAH
AABP
AAFX
BBBF
BBBJ
BBBM
BBBN
BBCG
HAAF
HAAP
HAAH
HAAU
HAAK
HAAX
HAAM
HABA
JAAB
JAAD
JAAG
JAAJ
JAAL
JAAN
JAAT
JAAW
Side Ports
0 Clockwise
1 Anti-Clockwise
Rear Ports
0 Anti-Clockwise
1 Clockwise
! Flanges - US Pattern
A
B
L
U
W
D
&&&& Option
ø32.018
ø32.002
35.0 -0.2
46
32 mm Parallel
41.5
60º
ø25.32
ø25.16
28.0 +0.3
6.27
6.19
25.4
47
1” SAE BB Parallel
UK 0800 130 3103
ø21.54
ø21.29
41
6B 1” SAE, 6 Tooth Spline
sales@whp.co.uk
Fax +44 1475 742888
Parker T Series Motors
click here to return to front page
Parker TF Motors - Specifications and Mounting Flanges
Parker TF - Specifications
Pump model
cc/rev
Displacement
in3/rev
Maximum Speed - Continuous
rev/min
Maximum Speed - Intermittent
rev/min
Maximum Oil Flow - Continuous
l/min
Maximum Oil Flow - Intermittent
l/min
bar
Maximum differential pressure Continuous
psi
bar
Maximum differential pressure Intermittent
psi
bar
Maximum supply pressure
psi
Maximum Torque - Continuous
Nm
Maximum Torque - Intermittent
Nm
KW
Maximum performance
[HP]
Minimum Starting Torque - Continuous Nm
Minimum Starting Torque - Intermittent Nm
Kg
Weight of motor with E and M Flanges
Lbs
Kg
Weight of motor with H and V Flanges
Lbs
E Flange
mm
M Flange
mm
Dimension L
H Flange
mm
V Flange
mm
0080
81
4.94
550
730
45
60
210
3046
280
4061
300
4350
220
295
22
29.50
172
236
13.6
30.0
14.0
30.9
186
191
146
213
0100
100
6.10
600
750
60
75
160
2321
240
3481
300
4350
200
320
25
33.53
168
252
13.7
30.2
14.0
30.9
186
191
146
213
0130
128
7.81
470
580
60
75
140
2031
210
3046
300
4350
230
360
22
29.50
192
280
13.9
30.6
14.2
31.3
189
194
149
216
0140
141
8.60
370
530
60
75
140
2031
210
3046
300
4350
250
390
22
29.50
197
308
14.0
30.9
14.3
31.5
191
196
151
218
0170
169
10.31
355
440
60
75
140
2031
210
3046
300
4350
320
490
23
30.84
264
388
14.2
31.3
14.6
32.2
194
199
154
221
0195
197
12.02
300
380
60
75
140
2031
210
3046
300
4350
365
560
22
29.50
304
448
14.7
32.4
14.9
32.8
197
202
157
224
0240
238
14.52
320
420
75
100
140
2031
210
3046
300
4350
430
670
28
37.55
368
548
15.0
33.1
15.3
33.7
202
207
162
229
0280
280
17.09
270
350
75
100
140
2031
210
3046
300
4350
550
800
28
37.55
440
672
15.5
34.2
15.6
34.4
206
212
167
233
0360
364
22.21
200
260
75
100
130
1885
190
2756
300
4350
590
910
24
32.18
510
779
16.0
35.3
16.3
35.9
215
220
175
242
0405
405
24.71
170
230
75
100
130
1885
175
2538
300
4350
660
920
22
29.50
575
789
16.5
36.4
17.0
37.5
220
225
180
247
0475
477
29.11
150
200
75
100
115
1668
140
2031
300
4350
680
850
17
22.80
603
740
17.5
38.6
17.5
38.6
229
234
189
256
For prices,
please register
online or contact
us by phone,
fax or email.
Patented High-Pressure Shaft Seal
No check valves required
No extra plumbing
Wide choice of displacement range, flange and shaft options
Greater efficiency in systems design to suit individual requirements
Low Speed Geroter Motor
Zero leak commutation valve - for increased and more consistent
volumetric efficiency
Roller Vane Rotor Set
Reduces friction and internal leakage
Maintains efficiency throughout the life of the motor
Parker TF - Mounting Flange Type (only European shown, contact Sales for US version drawings) all measurements are in millimetres (mm) unless otherwise stated
22º 30' 22º 30'
A
16.7
A
133
ø129.5
ø106.4
B
ø95
A
ø95
E
6 Bolt SAE A Magneto
4
45º
A
ø135
B
ø147.6
19.1
ø127.0
ø126.9
ø13.5
39.9
65.6
6.6
ø82.5
A
ø62.99
B
L
A
25.4
L
ø13.5
International +44 1475 742500
ø106.4
ø13.5
22.5
45.7
B
25.40
H
4 Bolt, Wheel Mount
www.whp.co.uk
ø82.5
B
M
4 Bolt SAE A Magneto
36.8 46.7
65
A
133
ø129.5
B
2.7
16.7
ø106.4
25.4
L
ø13.5
22º 30' 22º 30'
ø82.5
B
64.3
64
2.7
UK 0800 130 3103
16
A
ø82.5
B
ø105
ø127.0
ø126.9
7
Parker T Series Motors
64.3
64
L
V
xxxx
sales@whp.co.uk
Fax +44 1475 742888 347
click here to return to front page
Parker T Series Motors
Parker TG Motors - Ordering Code and Shafts
Ordering Code
For prices,
please register
online or contact
us by phone,
fax or email.
Use this chart to compile your ordering code. For example: WTG 0280 E N 44 1 AAAB
(TG Series Standard Motor, 280 cc/rev, 6 Bolt Flange, M8 x 13 universal front ports, 14 Tooth Splined shaft, Anti-Clockwise rotation)
WTG $$$$ !
£
?
* &&&&
$$$$ Displacement
Code
0140
0170
0195
0240
0280
0335
0405
0475
0530
0625
0785
0960
cc/rev
141
169
195
238
280
337
405
477
529
623
786
959
E
M
H
V
6 Bolt Magneto
4 Bolt Magneto
4 Bolt, Wheel Mount
SAE A, 4 Bolt (Rear ports only)
A
B
L
U
W
D
SAE A, 2 Bolt
SAE B, 2 Bolt
Wheel, Front Brake
Wheel, Standard
Wheel, Optional (rear porting only)
Large Wheel Mount(rear porting only)
08
44
45
46
1/2” BSP Side Ports
7/8” - 14 UNF O Ring Side Ports
Manifold M8 x 13 tappings (not possible with H Flange)
Manifold M6 x 12 tappings (only possible with H Flange)
1/2” BSP Rear Ports
7/8” - 14 UNF O Ring Rear Ports
1/2” BSP Radial Rear Ports
7/8” - 14 UNF O Ring Radial Rear Ports
Manifold M8 x 13 tappings Radial Rear Ports
Parker T Series Motors
Heavy Duty 1 1/4” SAE 1:8 Taper
14 tooth spline
31.75 mm Parallel
32 mm Parallel
? Shafts - US Pattern
01
02
03
04
05
06
19
20
62
Manifold, Rear Radial
ISO 6149, M22 X 1.5
5/16 - 18 UNC Manifold (not available with L, U or W Flange)
7/8 - 14 SAE
1" 6B Spline
1" Keyed
1 1/4" Keyed
10B Spline
1 1/4", 14 Tooth Spline
19 Tooth Spline
1 3/8" J501 Taper
1 3/8" Keyed
1 1/4" SAE, 14 Tooth Spline
Parker TG - Shaft Type (only European shown, contact Sales for US version drawings)
7.96
7.94
ø31.88
ø31.75
35
19
www.whp.co.uk
all measurements are in millimetres (mm) unless otherwise stated
50
36.5
54.5
3.4
3.0
49.3
8.5
ø7.91
ø7.89
10 -0.036
ø31.750
ø31.725
41
08
Heavy Duty 1 1/4” SAE 1:8 Taper
348
Side Ports
0 Clockwise
1 Anti-Clockwise
Rear Ports
0 Anti-Clockwise
1 Clockwise
? Shafts - Euro Pattern
£ Ports - US Pattern
E
H
M
S
AAAA Black Paint
AAAB Standard (no paint)
AAAH FPM Seals
AABP Castle nut
AAFX Shuttle Valve
BBBF Internal Relief Valve set at 200 bar
BBBJ Internal Relief Valve set at 100 bar
BBBM Internal Relief Valve set at 70 bar
BBBN Internal Relief Valve set at 140 bar
BBCG Internal Relief Valve set at 170 bar
HAAF External Relief Valve set at 100 bar (M6)
HAAP External Relief Valve set at 100 bar (M8)
HAAH External Relief Valve set at 140 bar (M6)
HAAU External Relief Valve set at 140 bar (M8)
HAAK External Relief Valve set at 170 bar (M6)
HAAX External Relief Valve set at 170 bar (M8)
HAAM External Relief Valve set at 200 bar (M6)
HABA External Relief Valve set at 200 bar (M8)
JAAB Motor-brake combination 11 bar
JAAD Motor-brake combination 16 bar
JAAG Motor-brake combination 22 bar
JAAJ Motor-brake combination 11 bar
JAAL Motor-brake combination 16 bar
JAAN Motor-brake combination 22 bar
JAAT Motor-brake combination 22 bar
JAAW Motor-brake combination 22 bar
Other options available with US Pattern Motors
* P referred
Rotation
! Flanges - US Pattern
£ Ports - European Pattern
W
V
N
K
Y
A
X
B
L
&&&& Option
! Flanges - Euro Pattern
44
14 Tooth Spline
International +44 1475 742500
ø31.750 ø31.725
35.4 +0.2
55.5
45
31.75 mm Parallel
UK 0800 130 3103
sales@whp.co.uk
ø32.018
ø32.002
46
32 mm Parallel
35.0 -0.2
Fax +44 1475 742888
Parker T Series Motors
click here to return to front page
Parker TG Motors - Specifications and Mounting Flanges
Parker TG - Specifications
Pump model
cc/rev
Displacement
in3/rev
Maximum Speed - Continuous
rev/min
Maximum Speed - Intermittent
rev/min
Maximum Oil Flow - Continuous
l/min
Maximum Oil Flow - Intermittent
l/min
bar
Maximum differential pressure Continuous
psi
bar
Maximum differential pressure Intermittent
psi
bar
Maximum supply pressure
psi
Maximum Torque - Continuous
Nm
Maximum Torque - Intermittent
Nm
KW
Maximum performance
[HP]
Minimum Starting Torque - Continuous Nm
Minimum Starting Torque - Intermittent Nm
Kg
Weight of motor with E and M Flanges
Lbs
Kg
Weight of motor with H and V Flanges
Lbs
E Flange
mm
M Flange
mm
Dimension L
H Flange
mm
V Flange
mm
0140
141
8.60
530
710
75
100
210
2900
280
4060
300
4350
400
545
33
44.25
320
436
14.2
31.3
16.1
35.5
191
196
150
217
0170
169
10.31
440
575
75
100
210
2900
280
4060
300
4350
485
670
33
44.25
388
536
14.5
32.0
16.3
35.9
194
199
154
220
0195
195
11.90
380
510
75
100
210
2900
280
4060
300
4350
560
770
33
44.25
448
616
14.7
32.4
16.6
36.6
197
202
157
224
0240
238
14.52
320
420
75
100
210
2900
280
4060
300
4350
685
945
32
42.91
548
756
15.1
33.3
17.0
37.5
202
208
162
228
0280
280
17.09
270
350
75
100
210
2900
280
4060
300
4350
800
1100
31
41.57
675
880
15.5
34.2
17.4
38.4
207
212
166
233
0335
337
20.57
225
290
75
100
210
2900
280
4060
300
4350
980
1350
30
40.23
784
1080
15.9
35.1
17.8
39.2
213
218
173
238
0405
405
24.71
185
245
75
100
170
2470
240
3480
300
4350
960
1350
27
36.21
791
1145
16.5
36.4
18.4
40.6
220
225
180
246
0475
477
29.11
160
240
75
115
140
2030
210
2900
300
4350
960
1400
28
37.55
768
1120
17.2
37.9
19.0
41.9
229
234
188
255
0530
529
32.28
140
215
75
115
140
2030
170
2470
300
4350
1050
1280
23
30.84
874
1091
17.9
39.5
19.8
43.7
235
240
195
262
0625
623
37.41
120
185
75
115
120
1740
160
2320
300
4350
1040
1360
20
26.82
895
1165
18.6
41.0
20.5
45.2
245
250
204
272
0785
786
47.96
95
145
75
115
100
1450
140
2030
300
4350
1150
1490
17
22.80
991
1341
20.2
44.5
22.0
48.5
264
269
223
290
0960
959
58.52
78
119
75
115
70
1015
100
1450
300
4350
925
1390
12
16.09
763
1177
22.0
48.5
23.7
52.2
283
288
242
309
For prices,
please register
online or contact
us by phone,
fax or email.
Patented High-Pressure Shaft Seal
No check valves required
No extra plumbing
Wide choice of displacement range, flange and shaft options
Greater efficiency in systems design to suit individual requirements
Low Speed Geroter Motor
Zero leak commutation valve - for increased and more consistent
volumetric efficiency
Roller Vane Rotor Set
Reduces friction and internal leakage
Maintains efficiency throughout the life of the motor
Parker TG - Mounting Flange Type (only European shown, contact Sales for US version drawings) all measurements are in millimetres (mm) unless otherwise stated
22º 30' 22º 30'
A
16
A
133
ø126.5
ø106.4
B
ø95
22º 30' 22º 30'
4
A
ø135
B
ø147.6
47
65.6
6.5
19
ø127.0
ø126.9
ø13.5
A
B
ø82.5
ø75
A
22.5
45.7
UK 0800 130 3103
16
7
A
ø82.5
B
ø105
ø127.0
ø126.9
L
International +44 1475 742500
ø106.4
ø13.5
B
H
4 Bolt, Wheel Mount
www.whp.co.uk
L
M
4 Bolt SAE A Magneto
37
45º
ø82.5
B
ø13.48
E
6 Bolt SAE A Magneto
65
A
133.4
ø129.5
B
2.7
15.7
ø106.4
L
ø13.5
A
ø82.5
B
64.3
63.068
8
Parker T Series Motors
59
64
L
V
xxxx
sales@whp.co.uk
Fax +44 1475 742888 349
click here to return to front page
Parker T Series Motors
Parker TH Motors - Ordering Code and Shafts
Ordering Code
For prices,
please register
online or contact
us by phone,
fax or email.
Use this chart to compile your ordering code. For example: WTH 0280 U X 32 0 AAAB
(TH Series Standard Motor, 280 cc/rev, Standard Wheel Flange, 1/2" BSP Radial Rear ports, 1.1/2" Keyed shaft, Clockwise rotation)
WTH $$$$ !
£
?
* &&&&
$$$$ Displacement
Code
0140
0170
0195
0240
0280
0335
0405
0475
0530
0625
0785
0960
cc/rev
141
169
195
238
280
337
405
477
529
623
786
959
! Flanges - European Pattern
&&&& Option
M 4 Bolt Magneto
U Wheel, Standard
AAAA
AAAB
AAAH
AABP
AAFX
BBBF
BBBJ
BBBM
BBBN
BBCG
* P referred
Rotation
! Flange - US Pattern
P SAE B, 4 Bolt (Rear ports only)
Side Ports
0 Clockwise
1 Anti-Clockwise
Rear Ports
0 Anti-Clockwise
1 Clockwise
£ Ports
? Shafts - Euro Pattern
7/8” - 14 UNF O Ring Side Ports
1/2” BSP Rear Ports
7/8” - 14 UNF O Ring Rear Ports
1/2” BSP Radial Rear Ports
- 14 UNF O Ring Radial
B 7/8”
Rear Ports
M8 x 13 tappings
L Manifold
Radial Rear Ports
31 1 1/2" SAE J501 Taper
32 1 1/2" SAE Parallel Keyed
S
Y
A
X
Parker T Series Motors
48
350
ø38.100
ø38.075
36 1 1/2" SAE, 17 Tooth 12/ 24 Spline
9.50
9.47
ø38.100
ø38.075
4.00
3.45
9.50
9.47
41.8 +0.25
50
23
International +44 1475 742500
all measurements are in millimetres (mm) unless otherwise stated
36.5
31
1 1/2" SAE J501 Taper
www.whp.co.uk
Other options available with US Pattern Motors
? Shafts - US Pattern
Parker TH - Shaft Type (only European shown, contact Sales for US version drawings)
33.3
Black Paint
Standard (no paint)
FPM Seals
Castle nut
Shuttle Valve
Internal Relief Valve set at 200 bar
Internal Relief Valve set at 100 bar
Internal Relief Valve set at 70 bar
Internal Relief Valve set at 140 bar
Internal Relief Valve set at 170 bar
23
32
1 1/2" SAE Parallel Keyed
UK 0800 130 3103
sales@whp.co.uk
Fax +44 1475 742888
Parker T Series Motors
click here to return to front page
Parker TH Motors - Specifications and Mounting Flanges
Parker TH - Specifications
Pump model
cc/rev
Displacement
in3/rev
Maximum Speed - Continuous
rev/min
Maximum Speed - Intermittent
rev/min
Maximum Oil Flow - Continuous
l/min
Maximum Oil Flow - Intermittent
l/min
bar
Maximum differential pressure Continuous
psi
bar
Maximum differential pressure Intermittent
psi
bar
Maximum supply pressure
psi
Maximum Torque - Continuous
Nm
Maximum Torque - Intermittent
Nm
KW
Maximum performance
[HP]
Minimum Starting Torque - Continuous Nm
Minimum Starting Torque - Intermittent Nm
Kg
Weight of motor
Lbs
Dimension L (M Flange)
mm
Dimension L (U Flange)
mm
0140
141
8.60
530
710
75
100
210
2900
280
4060
300
4350
400
545
33
44.25
320
436
17.0
37.5
216
173
0170
169
10.31
440
575
75
100
210
2900
280
4060
300
4350
485
670
33
44.25
388
536
17.2
37.9
219
177
Low Speed Geroter Motor
Zero leak commutation valve - for increased and more consistent
volumetric efficiency
Roller Vane Rotor Set
Reduces friction and internal leakage
Maintains efficiency throughout the life of the motor
0195
195
11.90
380
510
75
100
210
2900
280
4060
300
4350
560
770
33
44.25
448
616
17.4
38.4
222
180
0240
238
14.52
320
420
75
100
210
2900
280
4060
300
4350
685
945
32
42.91
548
756
17.8
39.2
227
184
0280
280
17.09
270
350
75
100
210
2900
280
4060
300
4350
800
1100
31
41.57
675
880
18.2
40.1
232
189
0335
337
20.57
225
290
75
100
210
2900
280
4060
300
4350
980
1350
30
40.23
784
1080
18.6
41.0
238
196
0405
405
24.71
185
245
75
100
170
2470
240
3480
300
4350
960
1350
27
36.21
791
1145
19.2
42.3
245
203
0475
477
29.11
160
240
75
115
140
2030
210
2900
300
4350
960
1400
28
37.55
768
1120
19.8
43.7
254
212
0530
529
32.28
140
215
75
115
140
2030
170
2470
300
4350
1050
1280
23
30.84
874
1091
20.6
45.4
260
218
0625
623
37.41
120
185
75
115
120
1740
160
2320
300
4350
1040
1360
20
26.82
895
1165
21.3
47.0
270
227
0785
786
47.96
95
145
75
115
100
1450
140
2030
300
4350
1150
1490
17
22.80
991
1341
22.9
50.5
289
246
0960
959
58.52
78
119
75
115
70
1015
100
1450
300
4350
925
1390
12
16.09
763
1177
24.5
54.0
308
265
For prices,
please register
online or contact
us by phone,
fax or email.
Patented High-Pressure Shaft Seal
No check valves required
No extra plumbing
Wide choice of displacement range, flange and shaft options
Greater efficiency in systems design to suit individual requirements
Parker TH - Mounting Flange Type (only European shown, contact Sales for US version drawings) all measurements are in millimetres (mm) unless otherwise stated
87
22º 30' 22º 30'
A
16
133
ø106.4
B
ø95
A
ø126.9
ø127.0
B
L
ø13.5
40
3
64
ø82.5
A
ø135
B
ø147.6
M
4 Bolt SAE A Magneto
www.whp.co.uk
International +44 1475 742500
4
45º
ø127.0
ø126.9
22
A
ø82.5
B
L
ø13.5
U
xxxx
UK 0800 130 3103
45
sales@whp.co.uk
Parker T Series Motors
63
Fax +44 1475 742888 351